DOCSLIB.ORG

Product Line Sheet Oxford Lumber and Building Materials 113 Oxford Road, Oxford, CT 203-888-9200 | Oxford-Lumber.Com

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Product Line Sheet Oxford Lumber and Building Materials 113 Oxford Road, Oxford, CT 203-888-9200 | Oxford-Lumber.Com Product Line Sheet Oxford Lumber and Building Materials 113 Oxford Road, Oxford, CT 203-888-9200 | oxford-lumber.com Benjamin Moore Paints & Stains Hardware, Tools & Misc. Roofing Super Hide; Ultra Spec; Arborcoat Stains Commercial Door Hardware GAF Roofing Products; Wood Shingles Regal, Aura, Moorlife, Moorguard, Moorglo Schlage Int./Ext. Door Hardware EPDM Rubber Roofing & Accessories Ben, Natura; Epoxy Floor Coatings Emtek, Baldwin, Stanley Hardware Grace Ice & Water Shield and Generic Bostitch Pneumatic, Cobra Roll Vent (Including Gunnable) Concrete Metabo (formerly Hitachi) Pneumatic Flashing: Aluminum, Lead, Copper Quikrete, Sonotubes, Tube Base Makita, Porter Cable Full Line of Blades & Bits Septic & Drainage Decking & Railings Full Line of Hand Tools & Access. PVC Drainage Pipe: Solid & Perforated; Fittings SYP PT #1 (1x, 5/4x, 2x, 4x, 6x) Tarps; Ropes; Chains SDR35 Gasketed Sewer Pipe & Fittings Azek PVC and TimberTech Decking & Rail Safety Products Solvent Weld SDR 35 Sewer Pipe Trex Decking & Rail > Solid & Perforated; Fittings Mahogany Decking (1x, 5/4x, 2x) Housewrap & Ventilation 4" Sched. 40 Pipe & Fittings Red Cedar & Access. (1x & 2x) Tyvek, PermaWrap CT State-Approved Filter Fabric 300' Rolls RDI Rail, Intex Rail Henry Blueskin Pipe Lube For Gasketed DSR 35 Atlantis Stainless Steel Smart Vent, Flood Vents 3 x 100' Silt Fence With Stakes Decking Screws & Fasteners Sewer & Water Line Burial Tapes Insulation Distribution Boxes Drywall Johns Manville Fiberglass Insulation Septic Leaching Field Chambers Drywall, Plaster Board & Accessories Rockwool Insulation Boom Truck Deliveries Poly-Iso Rigid Insulation Sheathing & Plywood Advantech T&G (3/4" & 5/8") Electrical Kitchens Advantech S/E (1/2" & 5/8") Sched. 40 PVC Electrical Conduit Debut, Dynasty by Omega, GP Prem OSB - "DryGuard” Galvanized 90deg sweeps for 2", 3" & 4" Eastman St. Woodworks, Greenfield, ZIP System Panels Electrical Line Burial Tapes HomeCrest, JSI, Legacy, > 7/16"x8',9'10; 1/2" Wall/Roof; 5/8" SE/T&G PVC Fittings; Pull Rope Omega, Schrock, UltraCraft WindStorm Counters: Granite, Marble, Quartz, Laminate > 109.125", 121.125", 124.75", 145.125" Engineered Wood Products Cabinetry Decorative Hardware Fir CDX 1/2"x4'x10' Boise Cascade I-Joists & LVL Cabinetry & Countertop Installation FIR & SYP Plywoods; OSB Sheathing Boise Cascade All-Joists AC & MDO Boise Cascade VERSA-LAM® Millwork Fire Treated & Pressure Treated Plywood USP-MiTek EWP Hangers & Connectors Andersen Windows & Doors Andersen A & E Series Custom Windows Siding Fasteners JELD-WEN All Series Windows & Doors Red Cedar Clapboard Primed & Raw GripRite Fasteners Pella Red Cedar Shingles Primed & Raw Hitachi Pneumatic Nails United Vinyl Windows & Doors SBC White Cedar Shingles Prefin. & Raw USP-MiTek Fasteners & Adhesives > Avail. w/Applied Ext Jambs & Flat Casing James Hardie Fiber Cement Silverline Vinyl Windows & Doors Mitten Vinyl Siding & Accessories Flooring Velux Roof Windows & Skylights Select & Better Red Oak Strip Mouldings: A & B, Metrie, Fypon Trim & Boards Select & Better White Oak Strip Interior Trims: Oak, Poplar, Mahogany Versatex Solid PVC Trim (1x and 5/4x) CVG Fir Flooring Interior Pre-Hung Doors > Stealth Trim & Corners; Many Mouldings Exterior Doors: Therma-Tru, JELD-WEN, James Hardie Fiber Cement Trim Framing Upstate, Simpson, Masonite Pine Boards Solid Primed & Raw (1x & 5/4x) K.D. Doug-Fir 2x4 - 2x12 - 28’ Stair Treads, Risers Pine P.F.J. "Centurion" (1x & 5/4x) K.D. SPF 2x4 - 2x12 - 20' Stair Parts: Handrail, Balusters, Newels Clear Red Cedar (R/L V.G. 1x4-1x12) Fire Treated Lumber In-House Custom Millwork Shop Primed F.J. Red Cedar (R/L V.G. 1x4-1x12) Steel Studs & Tracks Select Knotty Cedar In-House Roof & Floor Trusses In-House Wall & Floor Panels T H E N A T I O N A L L U M B E R F A M I L Y O F C O M P A N I E S | | HQ: 71 Maple St, PO Box 9032, Mansfield, MA 02048 T: 508.339.8020 F: 508.339.4518 national-lumber.com 3/2019.
Load more

Recommended publications
  • 2010 Directory of Maine's Primary Wood Processors
    Maine State Library Digital Maine Forest Service Documents Maine Forest Service 9-14-2011 2010 Directory of Maine's Primary Wood Processors Maine Forest Service Forest Policy and Management Division Follow this and additional works at: https://digitalmaine.com/for_docs Recommended Citation Maine Forest Service, "2010 Directory of Maine's Primary Wood Processors" (2011). Forest Service Documents. 253. https://digitalmaine.com/for_docs/253 This Text is brought to you for free and open access by the Maine Forest Service at Digital Maine. It has been accepted for inclusion in Forest Service Documents by an authorized administrator of Digital Maine. For more information, please contact [email protected]. 2010 Directory of Maine’s Primary Wood Processors Robert J. Lilieholm, Peter R. Lammert, Greg R. Lord and Stacy N. Trosper Maine Forest Service Department of Conservation 22 State House Station Augusta, Maine 04333-0022 School of Forest Resources University of Maine Orono, Maine 04469-5755 December 2010 Table of Contents Introduction ......................................................................................................................... 1 Maine's Primary Wood Processors I. Stationary Sawmills ............................................................................................. 4 II. Portable Sawmills ............................................................................................. 67 III. Pulp and Paper Manufacturers ...................................................................... 106 IV. Stand-Alone
    [Show full text]
  • EXTERIOR WOODWORK Township of Hopewell Historic Preservation Commission GUIDELINES for EXTERIOR WOODWORK
    GUIDELINES FOR EXTERIOR WOODWORK Township of Hopewell Historic Preservation Commission GUIDELINES FOR EXTERIOR WOODWORK WOOD SIDING, SHINGLES AND TRIM Wood siding, shingles and trim on a building’s wall surface serve both functional and aesthetic purposes. Functionally, exterior woodwork acts as the skin of the building, shedding water and deflecting sunlight and wind. Aesthetically, woodwork is an important design feature and can be applied as siding, shingles and ornamental trim. Exterior woodwork: • Establishes a weather-tight enclosure, providing Wood clapboard siding is one of the most common historic exterior protection from rain, wind and sun wall materials in Hopewell Township. • Is affected by temperature variation and building PURPOSE movement • Establishes a building’s scale, mass and proportion These Guidelines were prepared to assist property owners with information when considering the • Acts as an important design feature, helping to define maintenance, repair, replacement or installation of a building’s architectural style wood siding, shingles and trim. They are not intended • Adds visual interest to the streetscape to replace consultation with qualified architects, • Adds pattern and casts shadows on wall surfaces contractors and the Historic Preservation Commission (HPC). The HPC will be happy to provide consultation With proper maintenance, exterior wood elements can and assistance with materials, free of charge. last for centuries, however improper maintenance can result in problems and deterioration from water, These Guidelines were developed in conjunction with fungus, mold and insects. Hopewell Township’s Historic Preservation Commission (HPC). The HPC reviews Certificate of Appropriateness (COA) applications for proposed exterior alterations to properties locally designated as Historic Landmarks or within a local Historic District.
    [Show full text]
  • Ocean State Drafting " O DN a 2 8'-0" 1
    s 3 7 e A2 CONSTRUCTION NOTES 5 c 5 1. ALL WORK TO CONFORM WITH RHODE ISLAND STATE BUILDING CODE i 2. DO NOT SCALE DIMENSIONS FROM DRAWINGS. USE CALCULATED DIMENSIONS 3 v . 12'-0" 24'-0" 6'-0" ONLY. NOTIFY THE DESIGNER IMMEDIATELY IF ANY CONFLICT EXISTS. r 3. ALL WOOD IN CONTACT WITH CONCRETE TO BE PRESSURE TREATED. 4 4. ALL EXTERIOR WALLS 2x6 UNLESS OTHERWISE NOTED e 1 8 15'-6 2" 8'-0" s 5. ALL INTERIOR WALLS 2x4 UNLESS OTHERWISE NOTED 2 1 6. PROVIDE BLOCKING IN WALLS FOR CABINETRY OR SHEATH WALL . 1 5 2" 3 n 7'-6 " 3'-91 " 4'-2 " W/ 1 " CDX PLY. WD. 8'-0" 2 4 4 2 1 7 . PROVIDE BLOCKING IN WALLS FOR TOWEL BARS & PAPER ROLLS CONFER WITH g i OWNER ON LOCATIONS 0 s " 2 3" 3" 4 1 5 08 07 06 05 DOOR NOTES e : 1. CENTER DOORS WHERE POSSIBLE UNLESS OTHERWISE NOTED d p 2. PROVIDE MINIMUM 6" FROM JAMB TO INSIDE CORNERS/CABINETRY UNLESS d OTHERWISE NOTED | PANTRY PLUMBING NOTES: n a " m 2 1. INSULATE AROUND WASTE PIPES OR USE CAST IRON FOR SOUND DAMPENING 1 " o 2 2. PROVIDE EXTERIOR SPIGOTS PER OWNERS PREFERENCE BATH 1 g 5'-2 c . 1 KITCHEN NOTES: n 3 " 6'-11 2 1 i 1. 24" BASE CABINETS g t 8'-0" 1 1 1 4'-0" A4 3'-4 2" 3'-10 2" 5 2" 2. 12" UPPER CABINETS f 09 3'-3" 6'-2" 3'-6" n i 10'-0" 3.
    [Show full text]
  • Preservation of Historic Resources PAGE LEFT INTENTIONALLY BLANK
    SECTION 2: PReseRVAtion OF HistoRic ResoURces PAGE LEFT INTENTIONALLY BLANK. HISTORIC RESOURCE DESIGN GUIDELINES CHAPTER 2.1: WINDOWS CITY OF SANTA BARBARA CHApteR 2.1: WinDOWS INTRODUCTION Windows are one of the most visible, yet commonly under-appreci- ated components of older and historic homes and historic resources. Many historic structures in Santa Barbara have original wood win- dows that have lasted over a century. They may have intricate details that give depth, light, and shadow to a building’s façade. Original windows reflect the design intent for the building, including the period, regional style, and building techniques. In fact, many wood windows are considered hand-crafted pieces of art that are examples of exceptional craftsmanship and design. Windows give scale to a building and provide visual interest to the composition of individual façades, while distinct designs help de- fine many historic building styles. These openings define character through their material, profile, shape, size, configuration, and ar- rangement on the façade. These Guidelines will help property own- ers consider all the factors and options when repairing or replacing original windows. HISTORIC RESOURCE DESIGN GUIDELINES 35 HISTORIC RESOURCE DESIGN GUIDELINES CITY OF SANTA BARBARA Drip cap Head BENEFITS OF KEEPING HISTORIC WINDOWS HEAD Original windows are a key component of a historic building’s design Upper sash and appearance. The benefits of maintaining and repairing a build- ing’s original windows include: Lock Rail • Helps to retain the historic character of the building JAMB • Wood windows made prior to 1940 are likely made from old- growth wood that is significantly denser, more durable, and Glazing more rot-resistant.
    [Show full text]
  • Gold Bond® Gypsum Sheathing
    TH 06 16 43/NGC 10 EDITION BUYLINE 1100 ® Gold Bond BRAND Gypsum Sheathing 06 16 43 ® 27 GOLD BOND BRAND GYPSUM SHEATHING DESCRIPTION TECHNICAL DATA Gold Bond Brand Gypsum and as a component in SIZES AND TYPES Sheathing is a water curtainwall systems and 1/2" x 2' x 8' (Regular) tongue and groove edge. resistant board product exterior insulation systems designed for attachment to and finishes. 1/2" x 4' x 8', 9', 10' (Jumbo) square edge. the outside of exterior wall 3. As a sheathing for use in 5/8" x 4' x 8', 9', 10' (Fire-Shield Jumbo) square edge. framing as a water resistant fire-rated exterior wall VAPOR PERMEABLE underlayment for various assemblies. exterior siding materials. Gypsum Sheathing typically has an average vapor permeance The sheathing is ADVANTAGES of 20 perms (dry cup method) which allows the escape of manufactured with a 1. Economical: Both material normal interior created water vapor. treated water resistant core and application costs are SURFACE BURNING CHARACTERISTICS: faced with water repellent low. (FIRE HAZARD CLASSIFICATION) paper on both face and 2. Fire Resistance: The non- Both regular (2' x 8') and Jumbo (4' x 8', 9', 10') have a flame back surfaces and on both combustible gypsum core long edges. Fire-Shield spread of 20 when tested under ASTM E 84. Source: Factory of the sheathing helps Mutual Report No. 16738.102. (type X) Jumbo Sheathing protect framing elements has special additives in the even when the siding or FIRE-RESISTANCE RATINGS core to enhance its fire finish material is A one-hour fire rating can be achieved for a wood framed wall resistive properties.
    [Show full text]
  • Y:\Ledyard-Concord(South Main
    Alterations to 74 South Main Street Concord New Hampshire I n t e r s t a t e 9 3 SITE DRAWING SYMBOLS ROOM ROOM NO. & 301 48 NEW LINE NAME CONTOUR ABOVE 48 EXISTING DRAWING 5 GRID LINE CONTOUR 8 TITLE BUILDING 3 BUILDING LINE ELEVATION SECTION N BELOW A4 Vicinity Plan- 1" = 1,000'-0" WINDOW NORTH CONSTRUCTION 7 ARROW 3 DETAIL SYMBOL A3 PARTITION 9 DOOR 4 TYPE SYMBOL REVISION 4 INTERIOR 2 SYMBOL A6 ELEVATION MATERIAL SYMBOLS LIST OF DRAWINGS C Cover, Zoning Information, List of Abutters, Vicinity Plan & Detailed Location Plan CONCRETE RIGID WOOD INSULATION BLOCKING EC Existing Conditions Survey SPR-1 Existing Site Plan and Elevations STONE WOOD SPR-2 Proposed Site Plan and Elevations BATT STUD INSULATION SPR-3 Landscape and Lighting Plan BRICK FINISH SPRAYFOAM WOOD C-1 Grading and Drainage Plan INSULATION ZONING INFORMATION C-2 Construction Details C-3 Construction Details CONCRETE PLYWOOD BLOCK CELLULOSE ZONE CU- URBAN COMMERCIAL INSULATION THIS PROJECT CONCORD ORDINANCE STEEL CRUSHED EARTH STONE EXISTING PHARMACY W/ DRIVE-UP USE ALLOWED ALUMINUM GRAVEL PROPOSED BANK W/ DRIVE-UP GYPSUM WALLBOARD View from corner of South Main Street and Perley Street LOT AREA (ACTUAL) 11,057 SF 12,500 SF MINIMUM BUILDABLE LAND 5,592 SF 6,250 SF MINIMUM ABBREVIATIONS LIST OF ABUTTERS FB -Face Brick NIC -Not In Contract ROAD FRONTAGE 210.5 FT 100 FT MINIMUM ADJ -Adjustable FCU -Fan Coil Unit NON-BRG -Non-Bearing MAP 28/2/2 ACT -Acoustical Ceiling Tile FE -Fire Extinguisher NRC -Noise Reduction Coefficient JARRS LLC A/C -Air Conditioning FD -Floor Drain NTS -Not To Scale SETBACKS AFF -Above Finish Floor FD -Fire Damper 110 RUNNELLS ROAD OA -Overall CONCORD, NH 03303-3909 ALT -Alternate FF -Finish Floor OBS -Obscure FRONT ANOD -Anodized FGL -Fiberglass O/C -On Center S.
    [Show full text]
  • Architectural Style Guide: American Colonial Revival
    City of Anaheim Architectural Style Guide: American Colonial Revival Prepared for City of Anaheim Planning and Building Department Anaheim, CA Prepared by Architectural Resources Group June 9, 2020 American Colonial Revival Chapter Overview This Architectural Style Guide is a reference tool for owners and managers of historic American Colonial Revival buildings. You can use this document to identify the features and materials that define your building’s historic character. In cases where you wish to make changes to your building, this guide will help you determine compatible features and materials. This guide supplements the Citywide Historic Preservation Plan (2010) by providing more detailed information specific to the preservation of Anaheim’s American Colonial Revival properties. It should be noted that the information described herein is meant to provide general guidance regarding the appropriate treatment of American Colonial Revival buildings. Owners should consult with the City on applicable planning and zoning requirements before making any changes to their historic American Colonial Revival properties. What’s Inside... Historical Background.........................................................................................................................1 Character-Defining Features..............................................................................................................2 Additional Examples of the Style.......................................................................................................3
    [Show full text]
  • Mcgavern Design
    McGavern Design McGavern Design 21 Marlboro Street Newburyport, MA 978.914.1900 ASSOCIATE Joseph P Fix, P.E. Fix Engineering 2 Silver Ledge Rd. Newbury, MA 01951 978-462-4331 VOLDINS RESIDENCE 15 Alba Road Wellesley, MA Addition/Renovation DATE 2-15-18 ISSUE FOR CONSTRUCTION ZONING REGULATIONS DRAWING LIST A0 COVER SINGLE RESIDENCE 10,000 SF DISTRICT A1 SITE PLAN A2 EXISTING BASEMENT FLOOR PLAN/DEMOLITION PLAN LOT SIZE: 14,668 SF A3 EXISTING FIRST FLOOR PLANS/DEMOLITION PLAN A4 EXISTING SECOND FLOOR PLANS/DEMOLITION PLAN LOT COVERAGE: EXISTING ALLOWED PROPOSED A5 EXISTING EXTERIOR ELEVATIONS 8.4% 20% 14.4% A6 PROPOSED BASEMENT FLOOR PLAN 1,239 SF 2,500 SF 2,112 SF A7 PROPOSED FIRST FLOOR PLAN A8 PROPOSED SECOND FLOOR PLAN YARD REGULATIONS EXISTING ALLOWED PROPOSED A9 PROPOSED EXTERIOR ELEVATION FRONT YARD WIDTH 155.94’ MIN. 60' 36’ A10 PROPOSED EXTERIOR ELEVATION FRONT YARD DEPTH 39.5’ MIN. 30' 36’ A11 PROPOSED EXTERIOR ELEVATION SIDE YARD WIDTH 26.4’,40.6’ MIN. 20' 21.3’/38.1’ A12 PROPOSED EXTERIOR ELEVATION REAR YARD DEPTH 42’ MIN. 10’ 35.3’ A13 PROPOSED INTERIOR ELEVATIONS A14 PROPOSED INTERIOR ELEVATIONS TLAG EXISTING ALLOWED PROPOSED A15 PROPOSED INTERIOR ELEVATIONS 1,732 SF 3,600 SF 3,486 SF A16 BUILDING SECTION A17 BUILDIG SECTION S1 FRAMING PLANS S2 FRAMING PLANS S3 FRAMING PLANS S4 FRAMING PLANS S5 FRAMING PLANS S6 BUILDING/WALL SECTION A.0 McGavern Design 1 A11 McGavern Design 21 Marlboro Street 10’-0” REAR YARD Newburyport, MA 978.914.1900 SETBACK NEW STONE STEPS & WALKWAY ASSOCIATE DRIVEWAY STONE RETAINING WALL RE-BUILT AS
    [Show full text]
  • DESIGN REVIEW GUIDELINES of the FARMINGTON WOODS MASTER ASSOCIATION
    DESIGN REVIEW GUIDELINES Of The FARMINGTON WOODS MASTER ASSOCIATION Revised November 2, 2016 1 11/2/2016 Design Review Handbook Table of Contents Page I. Introduction 3 II. Procedures 4 A. Applications 4 B. Notice to Interested Unit Owners 4 C. Financial Responsibility 4 D. Fees 5 E. Reply 5 F. Covenant Restrictions and Agreements 5 G. Appeal 5 H. Time for Compliance 5 I. Deviation from Approval 6 J. Alleged Violations 6 K. Inspections 6 III. Items Requiring Approval 6 A. Items Requiring Approval by Design Review Committee 6 B. Items for Which Approval Should Not be Expected 12 IV. Guidelines, Rules and Specifications 14 A. Roof Windows and Skylights 14 B. Storm Windows; Combination Storm/Screen Door 14 C. Awnings 14 D. Decks 15 E. Enclosed Porches/Patios 15 F. Antennas 23 G. Exterior Painting/Staining 27 H. Gutters 27 I. Window Installation 27 J. Landscape Lights 28 V. Excerpts from Declaration of Condominium 32 A. Design Review Committee, Article XVIII, Section 2 32 B. Description of Limited Common Element, Article XI, Section 1 and Section 2 33 VI. Forms A. Property Improvement Request 36 B. Proposed Alteration(s) Neighbor Notification 37 C. Agreement Regarding Addition or Improvement 38 D. Covenant Restriction (Agreement Regarding Enclosed Porch or Patio) 40 E. Notice of Intent to Install Antenna 42 F. Covenant Restriction (Agreement Regarding Antenna) 43 2 DESIGN REVIEW HANDBOOK I. INTRODUCTION The Design Review Committee (the “Design Review Committee”) is a group of Farmington Woods Unit Owners appointed by the Executive Board (the “Executive Board”) of the Farmington Woods Master Association (the “Master Association” or “FWMA”).
    [Show full text]
  • Vinyl Siding Policy Bulletin
    CLEVELAND HEIGHTS BUILDING DEPARTMENT 40 SEVERANCE CIRCLE CLEVELAND HEIGHTS, OHIO 44118 216-291-4900/216-291-4421 (FAX) Policy Bulletin SIDING No. 02-01 Authority to adopt: Cleveland Heights Building Code 1301,1511.02 RDHC, Architectural Board of Review 1313 Cleveland Heights Building Code. Re: Rules and Regulations for VINYL AND OTHER SYNTHETIC SIDING 1. GENERAL A building permit is required for the installation of vinyl or synthetic siding in accordance with the Cleveland Heights Building Code, and Policy Bulletin 02-01. Vinyl or synthetic siding shall be carefully installed as to protect the detailing of the original design. Detailing such as dentil molding, pillasters, columns, railings, balusters, etc. shall not be covered over, but rather left exposed or replaced with its equivalent. A variation from these regulations requires an approval from the Architectural Board of Review (Definition: Synthetic - other than wood). 2. SUBMISSION REQUIREMENTS The following must be submitted for a permit: A. Clear photos, using a 35mm camera or equal, of all sides of the home to be sided. (NO POLAROIDS, PLEASE.) B. At least one close-up photograph of the existing siding. If more than one type of siding is present (clapboard, wood shingles, stucco) please submit a close-up photo of each type of material. C. A measurement of the height of the existing clapboard,shingle, or lap siding. D. A measurement of the height of the proposed synthetic siding. E. A brochure from the siding manufacturer, including details of the siding. F. All contractors must be registered with the City, and complete a Residential Siding Permit Application.
    [Show full text]
  • PREMIUM SATIN 9400 Series
    PREMIUM SATIN EXTERIOR ACRYLIC 9400 Series DRY TIME Spread Recommended Clean Tack Type Sheen Rate Application Thinner Up Re-coat Cure Free Up to Warm 400 Sq Brush, Pad, Clean Soapy 60 4 10 - 14 Acrylic Satin Ft Per Roller or Spray Water Water Minutes Hours Days Gallon PRODUCT NAME: Premium Satin Exterior Acrylic House Paint provides tenacious adhesion to a wide variety of substrates. It is mildew and blister resistant, exhibits excellent durability, and superb color retention. Recommended for 9400 Series use on aluminum, vinyl, wood siding, clapboard, plywood, masonry and primed metal down to surface and Premium Satin air temperature 35°F. Exterior Acrylic WHERE TO USE: Wood Exterior – Virtually any exterior building surface will be suitable for Sungard. It is designed Masonry as a self -priming system on non-bleeding woods, masonry or clean and rust free galvanized Metal surfaces. May also be applied over primed ferrous metal and aluminum. Surface The surface to be painted must be clean and free of dirt, chalk, wax, grease, rust or loose, flaking paint. Dirt and chalk should be removed by power washing or hand scrubbing with TSP (or equivalent) and water, Preparation: followed by a clean water rinse. Wax should be removed by solvent cleaning. Grease and oil should be cleaned by using Coronado Sur-Prep 1. Rust must be removed by blasting, hand sanding vigorously or by power tool cleaning. Remove loose paint by scraping. Feather sand rough edges to insure a smooth finish coat. Glossy surfaces must be dulled by lightly sanding. Remove sanding dust before paint application.
    [Show full text]
  • INNOVATIVE BUILDING SOLUTIONS: Building Better Commercial Buildings with Engineered Wood Technologies
    INNOVATIVE BUILDING SOLUTIONS: Building Better Commercial Buildings With Engineered Wood Technologies Presented By: Sharon Roscher LP Building Solutions This Presentation was developed by a third party and is not funded by Woodworks or the Softwood Lumber Board 6/2/20 1 Engineered Wood Is Made From Wood – A Renewable Resource § Manufacturers use SFI®-certified forest management and procurement systems which help ensure wood comes from well-managed forests § Improved Manufacturing process means no part of the log goes to waste § Use of only low-emitting, safe resins as a binder History Of Engineered Wood • Even after the delivery of logs to Particle Board a sawmill, residue materials had • represented up to 60% of the log 1887-1941-Particle Board-Germany • 1950’s-Particle Board production in the US (LDF) • Wood waste after the production of structural lumber Plywood was a concern for producers and • 1940’s-Plywood Forestry Agencies • 1946-NOVOPLY (3-ply MDF) Strand Board • 1965-Waferboard (random strand) • 1978-Flakeboard (Oriented Strand Board) Forest Service Supported OSB Technology • In 1973 A symposium was held by the Forest Service’s Structural Flakeboard OSB Growth in the US Task Force. The meeting was titled 1980-750M sq ft “Structural Flakeboard from Forest Residues” 1990-7.6 B sq ft • The cost savings from plywood helped 2006-31 B sq ft OSB gain market acceptance 2013-24 B sq ft • Benefits include: shear strength, longer 2018-26 B sq ft lengths, using new growth trees over larger trees needed for plywood What is Cementitious Coated
    [Show full text]