DOCSLIB.ORG

Birchwood Casey Birchwood Casey Y GSM, LLC GSM, LLC PO Box 535189 PO Box 535189 Grand Prairie, TX 75053 Grand Prairie, TX 75053 877-269-8490 877-269-8490

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Birchwood Casey Birchwood Casey Y GSM, LLC GSM, LLC PO Box 535189 PO Box 535189 Grand Prairie, TX 75053 Grand Prairie, TX 75053 877-269-8490 877-269-8490 BIRC H WOOD C WOOD ECHO™ SHOOTING REST ITEM: BC-ESR_UPC: 888151030851 A S E ▪ Steel frame design with adjustable leveling feet, non-slip rubber stock rest Y ▪ Front site: 3.5” elevation adjustment ▪ Rear site: 3.25” adjustment for various rifle sizes Fits rifles with barrels as short as 7.5” ▪ SHOOTING ACCESSORIES BRAVO™ SHOOTING REST ▪ Rigid steel frame design with adjustable leveling feet, non-slip rubber stock rest and ambidextrous controls ITEM: BC-BSR_UPC: 888151030868 ▪ Front site: 3.5” elevation adjustment ▪ Rear site: 3.5” adjustment for various rifle sizes ▪ Fits rifles with barrels as short as 7.5” and high capacity magazines for AKs and ARs, with low profile design for prone shooting ALPHA™ SHOOTING REST ▪ Rigid steel frame design with adjustable leveling feet, non-slip rubber stock rest, ambidextrous controls, integrated front weight, ITEM: BC-ASR_UPC: 888151030875 butt stock shoulder rest and bullseye bubble level ▪ Front site: 2” windage and 3.5” elevation adjustment ▪ Rear site: 4.25” adjustment for various rifle sizes ▪ Fits rifles with barrels as short as 7.5” with low profile design for prone shooting 237 BIRC 4 PACK LEAD SLED WEIGHT BAGS H WOOD C WOOD ITEM: BC-SRWB-4PK_UPC: 888151031186 ▪ Designed to work with most Lead Sled models and can hold lead shot, sand or other weighted media ▪ Heavy duty construction material to ensure the bag can withstand transport and use in the shooting rest A Designed to fit horizontally or vertically in the weight tray ▪ S to allow for an additional bag if necessary E Y SHOOTING ACCESSORIES SECURELOCK™ GUN VISE ▪ Rigid steel frame design with adjustable non-slip leveling feet, non-marring materials, spring-loaded pull pins for easy slide adjustment, multi-purpose ITEM: BC-SLGV_UPC: 888151030882 storage trays and collapsible for easy storage and transport ▪ Works with break action firearms and pistols, adjustable clamps UNIVERSAL FRONT REST BAG ▪ Quickly connect to the front of your rest without having to lace fit a variety of guns or tie, just use the straps to thread through and attach ITEM: BC-UFRB-NRW_UPC: 888151031216 ▪ Height adjustable clamps and bench top mounting provisions ▪ All three bags are shaped to fit different forend sizes to ITEM: BC-UFRB-MED_UPC: 888151031223 maximize the usage of one shooting rest ITEM: BC-UFRB-WID_UPC: 888151031230 ▪ Constructed of leather and polyester which combine to create a solid and secure rest that will not stretch or sag from use ▪ Hook and loop straps allow for quick and easy changeout between bags and other shooting rests TACKDRIVER BAG ▪ Features a self-tightening grip to ensure a stable and solid hold on the firearm while shooting, fill spout stores inside the bag ITEM: BC-TSRB_UPC: 888151031209 RIFLE/PISTOL SHOOTING REST ▪ Adjustable elevation, comfortable and durable non-marring material and is secured by a hook and loop closure to ensure no leaks Padded front and rear ▪ Shaped to fit and hold almost all long guns from rifle to shotgun ITEM: BC-CSR_UPC: 888151031506 ▪ Non-marring surface protects the firearm while also gripping ▪ Fits rifles with detachable rear for use with handguns, removable ▪ center section enables unlimited adjustment and versatility the forend and reducing felt recoil ▪ Includes a shoulder strap and carry handle for easy transport FRONT MOUNT ▪ Adjustable elevation, comfortable and durable non-marring material RIFLE/PISTOL SHOOTING REST ▪ Padded front rest UNIVERSAL REAR BAG ▪ Bag comes filled with corn cob media to allow for immediate use ITEM: BC-ASR_UPC: 888151031490 ▪ Can be used with most handguns ITEM: BC-URBF_UPC: 888151031193 ▪ Can be used on virtually any surface ▪ Constructed of leather and polyester which combine to create a solid and secure rest that will not stretch or sag from use 238 GSMOUTDOORS.COM 239 WORLD OF TARGETS® STEEL TARGET For a shooting experience you can see and hear, shoot the World of Targets® family of BIRC ACTION YOU CAN steel targets. Enjoy easy set ups and hours of maintenance free shooting—all backed by SEE AND HEAR the best warranty in the industry. Whether you choose a gallery, spinner, or one of our innovative new designs, World of Targets® has something for every shooter. Each H WOOD C WOOD model gives instant feedback by delivering both action and sound. Every steel target TACTICAL DEADSHOT COMBO comes with Target Spots® targets for an easily discernible aiming point. ITEM: BC-SRB-CMBO_UPC: 888151031247 Specifically designed for tactical rifles (bags come filled) ▪ Perfect shooting height with plenty of clearance A ▪ for 30 round magazines S ▪ Rear bag is designed to go two different ways to hold E a variety of firearms Y ▪ Extremely heavy duty ballistic nylon fabric holds up to rough edged pic rail hand guard TARGETS ▪ Unique 6.25” center mass / hostage paddle BODY FLIPPER TARGET CENTERFIRE HANDGUNS AND RIFLES ▪ Pivoting cranial paddle ITEM: BC-47443_UPC: 029057474435 ▪ 3/8” AR500 steel RIMFIRE DUELING TREE TARGET ▪ Solid, one pie ce 38” steel post .22 RIMFIRE RIFLES AND .22 HANDGUNS ▪ 4 - 3.5” target paddles ITEM: BC-47424_UPC: 029057474244 ▪ No tools needed for assembly BASIC SCREWDRIVER KIT ▪ 22pc kit ▪ Slotted: 3, 4, 5, 6, 7mm, Philips: PH1, PH2, PH3, ITEM: BC-BSDS_UPC: 888151028858 Torx: T10, T20, T25, T30, Hex: 2, 3, 4, 5, 6mm, 1pc 50mm PH2 PRO SCREWDRIVER KIT ▪ 40pc kit ▪ Slotted: 3, 4, 5, 6, 7, 8, 9mm, Philips: PH0, PH1, PH2, PH3 .22 RIMFIRE POPPER TARGET ITEM: BC-DLXSDS_UPC: 888151028872 Pozidriv: PZ0, PZ1, PZ2, PZ3, Torx: T10, T15, T20, T25, T27, T30 .22 RIMFIRE RIFLES AND .22 HANDGUNS Hex: 1.5, 2, 3, 4, 5, 6mm, Hex: 1/16, 5/64, 3/32, 7/64, 1/8, 9/64 1pc 50mm PH2, 1pc 50mm SL3, 1pc 25mm socket adapter ITEM: BC-47524_UPC: 029057475241 ▪ Self-resetting target ▪ 80pc kit MASTER SCREWDRIVER KIT ▪ 4” target paddle ▪ Slotted: 3, 4, 5, 6, 7, 8, 9mm x2 ,Philips: PH0, PH1, PH2, PH3 x2 ITEM: BC-PROSDS_UPC: 888151028865 Pozidriv: PZ0, PZ1, PZ2, PZ3, Torx: T8, T10, T15, T20, T25, T27, ▪ Overall size: 4” W x 9.75” D x 8.25” H T30, T35, T40, Security Torx: T8, T10, T15, T20, T25, T27, T30, ® ▪ Includes 2 ground stakes MULE KICK AR500 GONG T35, T40, Hex: 1.5, 2, 2.5, 3, 4, 5, 6mm, Hex: 1/16, 5/64, 3/32, 7/64, 1/8, 9/64, 5/32, 3/16, 7/32, �, Square: S0, S1, S2, S3 CENTERFIRE HANDGUNS AND RIFLES Spanner: 4, 6, 8, 10, Tri-wing: Y1, Y2, Y3, Y4, 1pc 50mm PH1 ITEM: BC-47305_UPC: 029057473056 and PH2, 1pc 50mm SL3 and SL4, 1pc 50mm PZ1 and PZ2 1pc 50mm T10 and T15, 1pc 25mm socket adapter, 60mm bit ▪ 1/2” thick AR500 steel extension, Y-type bit ▪ 15.5” diameter gong TARGET STAPLER ▪ 3-IN-1 staple gun, with adjustable driving force ▪ Innovative stand works on most terrain ITEM: BC-STPLR_UPC: 888151027479 ▪ Hang targets at the range 240 GSMOUTDOORS.COM 241 WORLD OF TARGETS® WORLD OF TARGETS® BIRC H WOOD C WOOD 4” 6” 8” 10” A S 3/8” thick AR500 steel E ▪ AR500 STEEL TARGET GONGS Y 4” DOUBLE HOLE ▪ Center�re ri�e and handgun compatible ITEM: BC-47606_UPC: 029057476064 ▪ Target Spots® targets included 6” DOUBLE HOLE ▪ Build your own range ITEM: BC-47608_UPC: 029057476088 8” SINGLE HOLE ITEM: BC-47603_UPC: 029057476033 TARGETS 8” DOUBLE HOL E ITEM: BC-47604_UPC: 029057476040 10” SINGLE HOLE ITEM: BC-47614_UPC: 029057476149 USA MADE 10” DOUBLE HOLE ITEM: BC-47615_UPC: 029057476156 ® ▪ 9.5” diameter gong with 1/2” thick AR500 steel BOOMS LANG AR500 GONG CENTERFIRE HANDGUNS AND RIFLES ▪ Includes hanging hardware and stand ITEM: BC-47330_UPC: 029057473308 Stand: 24.7” H x 13.5”W x 7” D ▪ Assembled SPOILER ALERT™ STEEL TARGET ▪ 6” diameter target face, 14.5” overall height, AR400 steel construction .22 RIMFIRE RIFLES AND .22 HANDGUNS ITEM: BC-47652_UPC: 029057476521 ▪ Extremely loud; no doubt of hits and misses UNIVERSAL GONG STAND ▪ Holds virtually any diameter gong target from 3/8” to 1/2” thick ▪ Alternating, pop-up rim�re target B USHWACKER™ STEEL TARGET STEEL STAND AND SUPPORT Includes 2x4 upright bracket and .22 RIMFIRE RIFLES AND .22 HANDGUNS ▪ Rugged AR400 steel paddles ▪ ITEM: BC-49048_UPC: 029057490480 disassembles flat for transport ITEM: BC-47522_UPC: 029057475227 ▪ No strings or pulleys ▪ Requires 2x4 post, not included 2-IN-1 GO NG TARGET HANGER ▪ Mounts steel targets two different ways: free hanging or bolt 2-IN-1 STEEL GONG HANGER ▪ Hardened steel hook, fits on standard 2x4 lumber ITEM: BC-49052_UPC: 029057490527 and includes spring, bolt, and hook mount for versatility ADJUSTABLE TARGET STAND KIT ▪ Includes 6 modular uprights and single target backer, target stand, upright posts, and one white backer board TARGET STAND KIT ITEM: BC-49025_UPC: 029057490251 ▪ Adjustable width from 13” to 25” ▪ White backer board size: 19.5” x 19.5” 242 GSMOUTDOORS.COM 243 WORLD OF TARGETS® WORLD OF TARGETS® BIRC H WOOD C WOOD A S Heavy duty metal frame, adjusts from 8” to 24” wide E ▪ SCISSOR BASE TARGET STAND Y STEEL TARGET STAND and collapses for portability ITEM: BC-49020_UPC: 029057490206 ▪ Requires (2) 1x2 posts, not included ADJUSTABLE WIDTH TARGET STAND ▪ Heavy duty metal frame, adjusts from 13” to 25” wide, STEEL TARGET STAND lightweight and portable Requires (2) 1x2 posts, not included ITEM: BC-49018_UPC: 029057490183 ▪ TARGETS 2X4 STEEL TARGET STAND ▪ Perfect for steel targets STEEL TARGET STAND ▪ Parts nest into each other for storage and portability, ITEM: BC-49024_UPC: 029057490244 with no tools required ▪ Requires 2x4 post, not included ACE OF DIAMONDS® SPINNER TARGET ▪ 8” resetting 1/2” thick AR500 steel, stands CENTERFIRE HANDGUNS AND RIFLES 20” H x 8” W x 1.5” D, and is patent protected ITEM: BC-47340_UPC: 029057473407 ▪ Non-magnum (less than 3000FPS) calibers at
Load more

Recommended publications
  • Process Type Description Adhesive Application F+S Used to Bond Non-Metal Components. Adhesives Are Applied Either by Hand Or In
    Process Type Description Used to bond non-metal components. Adhesives are applied either by hand or in a spray Adhesive Application F+S booth controlled for air emissions. A two-step process by which the aluminum is first dissolved in a caustic bath and then Aluminum Making VENDOR precipitated out in crystals. This two-step process can be circumvented by using recycled scrap that is melted down to form new parts. Most stainless steels receive a final annealing (a heat treatment that refines the Anneal and Pickle VENDOR material's mechanical properties) and pickling (an acid wash that removes furnace scale from annealing and helps promote the passive surface film that naturally occurs). An electrolytic passivation process used to increase the thickness of the natural oxide Anodizing VENDOR layer on aluminum. Produces a protective surface that inhibits further oxidation (corrosion). F+S / Process that provides a matte/etched looking surface finish to material by applying fine Bead Blasting VENDOR glass beads at low pressure. Process in which a Fiber-Reinforced Polymer and metal granule matrix is blended and Bonded Metal Casting F+S cast in a mold. A mechanical process in which material is shaped at a single angle along a straight axis. Brake Forming F+S The process can be repeated to form more complicated shapes. An annealing process carried out in a controlled atmosphere furnace or vacuum so that Bright Annealing VENDOR oxidation is reduced to a minimum and the surface remains relatively bright. Metalworking process in which sheet metal is rolled out at room temperature, changing Calendaring VENDOR the molecular structure to make it harder and more resistant to scratching.
    [Show full text]
  • Hand Spinning and CNC Spinning
    Hand Spinning and CNC Spinning 931 N. Ridge Avenue, Lombard, IL 60148 Phone: 630.268.9292 • Fax: 630.268.9393 [email protected] • www. helandermetal.com Metal Spinning, a Bridge Between Craft and Automation Metal Spinning is a metalworking process that stands firmly between the artisans and craftsmen of the past and the machine tool automation of the present and future. It is a process certain to benefit from the high volume manufacturing techniques being developed, while still demanding high levels of individual craftsmanship. Manufacturers choosing to work in metal spinning will tap into the high production capabilities of an automated shop floor, but also require manual spinning to create more intricate architectural and decorative products. Combining both of these techniques allows for the mass production of the bulk of a product line through CNC automation, while finishing it up with hand spinning creating a product that is hand-worked. Metal Spinning Technology: A Closer Look On the surface, the spinning process is a simple one. A formed block, or mandrel, is mounted in the center drive section of a lathe. This formed block is the part that defines the shape of the final product. The block is machined from a variety of materials, including wood, polyurethane, aluminum and steel, each having its own strengths and weaknesses. A pre-sized metal disk, called the work piece, is then clamped against the ‘front’ of the block by a pressure pad. This pressure pad is also attached to the tailstock of the lathe. The block and the attached work piece are then rotated at high speeds.
    [Show full text]
  • PDH Course M381
    PDHonline Course M 497 (6 PDH) _______________________________________________________________________________________ Conventional Machining Technology Fundamentals Instructor: Jurandir Primo, PE 2013 PDH Online | PDH Center 5272 Meadow Estates Drive Fairfax, VA 22030-6658 Phone & Fax: 703-988-0088 www.PDHonline.org www.PDHcenter.com An Approved Continuing Education Provider www.PDHcenter.com PDH Course M 497 www.PDHonline.org CONVENTIONAL MACHINING TECHNOLOGY – FUNDAMENTALS Introduction Shaping Machines Lathes Slotting Machines - Metalworking lathes - Planing, shaping and slotting calculations - Classification of lathes - Turning operations Boring Machines - Semiautomatic and automatic lathes - Types of boring machines - Accessories - Boring types - Live centers and dead centers - Boring calculations - Rests and micrometer supports - Lathe cutting tools Hobbing & Gear Shaping Machines - Lathe calculations - Common gear generation types - Graduate micrometer and measurements - Details of involute gearing - Tools and inserts - Proper meshing and contact ratio - Common holders with inserts - Gear Shaping Machines - Goose-neck holders with inserts Broaching Machines Drilling Machines - Horizontal broaching machines - Classification of drilling machines - Vertical broaching machines - Application of drilling machines - Broaching principles - Types of drills - Broaching configuration - Drill sizes and geometry - Materials of broaches - Drill point angles - Geometry of broaching teeth - Drill holding & clamping of workpieces - Broaching operations
    [Show full text]
  • Manufacturing Technology I Unit I Metal Casting
    MANUFACTURING TECHNOLOGY I UNIT I METAL CASTING PROCESSES Sand casting – Sand moulds - Type of patterns – Pattern materials – Pattern allowances – Types of Moulding sand – Properties – Core making – Methods of Sand testing – Moulding machines – Types of moulding machines - Melting furnaces – Working principle of Special casting processes – Shell – investment casting – Ceramic mould – Lost Wax process – Pressure die casting – Centrifugal casting – CO2 process – Sand Casting defects. UNIT II JOINING PROCESSES Fusion welding processes – Types of Gas welding – Equipments used – Flame characteristics – Filler and Flux materials - Arc welding equipments - Electrodes – Coating and specifications – Principles of Resistance welding – Spot/butt – Seam – Projection welding – Percusion welding – GS metal arc welding – Flux cored – Submerged arc welding – Electro slag welding – TIG welding – Principle and application of special welding processes – Plasma arc welding – Thermit welding – Electron beam welding – Friction welding – Diffusion welding – Weld defects – Brazing – Soldering process – Methods and process capabilities – Filler materials and fluxes – Types of Adhesive bonding. UNIT III BULK DEFORMATION PROCESSES Hot working and cold working of metals – Forging processes – Open impression and closed die forging – Characteristics of the process – Types of Forging Machines – Typical forging operations – Rolling of metals – Types of Rolling mills – Flat strip rolling – Shape rolling operations – Defects in rolled parts – Principle of rod and wire drawing – Tube drawing – Principles of Extrusion – Types of Extrusion – Hot and Cold extrusion – Equipments used. UNIT IV SHEET METAL PROCESSES Sheet metal characteristics – Typical shearing operations – Bending – Drawing operations – Stretch forming operations –– Formability of sheet metal – Test methods – Working principle and application of special forming processes – Hydro forming – Rubber pad forming – Metal spinning – Introduction to Explosive forming – Magnetic pulse forming – Peen forming – Super plastic forming.
    [Show full text]
  • Tactical Gear Spring 2009
    You Need Monadnock Baton Training! SPRING 2009 ON TARGET WITH NIGHTFORCE REBUILD YOUR MAGAZINES GREAT NEW GEAR! US $5.50 CAN $6.50 Mossberg 21 NightTrain II 0 FnL1 04 0120 01 JUYrVyBQdWJsaWNhdGlvbnMsIEluYyAo 02 SW9sYSBkaXZpc2lvbikPR3JlZ29yeSBL 03 cnVlZ2VyAEnsYo0EMTAuNAI4MAExBVVQ Qy1BDDA3MTQ4NjUwMjYzMAA= 71486 50263 0 Display until August 16, 2009 11099519_TG.indd099519_TG.indd 1 44/17/09/17/09 22:03:15:03:15 PPMM 1099519_TG.indd 1 4/3/08 11:19:29 AM 11220302_BLSP.indd220302_BLSP.indd 1 44/17/09/17/09 22:07:05:07:05 PPMM Spring 2009 GEAR 6 Sig’s 556 SWAT 33 Camo that Rifl e A great rifl e, now civilian legal. It’s easier than you think to change from basic black. 33 12 A Most Useful Baton Training is the key to good baton 36 A Tactical Triple work. Monadnock offers the best. A look at three different tactical rifl es with a common thread: The .308 round. 16 NightForce Optics Great scopes for hard use. 36 20 Fix Your Magazines 40 Fit To Fight It’s simple to make old magazine Pt. 2 on creating a great work like new. workout area. 24 The GSR 1911 Sig quality in a 1911 platform 28 Targets Aid Training Several different types of targets 28 can keep your training real. 24 6 4 /TACTICAL GEAR SPRING 2009 GEAR Your Baton Is More Than An Impact Weapon f you’ve never been on the receiving end a of a control hold applied by an In- 700 E. State St., Iola, WI 54990-0001 ternational Level Instructor of the Monadnock training program, you don’t (715) 445-2214 I really know the meaning of the word “humility.” Chuck Martin was throwing me around like a rag doll.
    [Show full text]
  • Journeyman Skill List
    These Blacksmithing Skill standards were developed by the Appalachian Blacksmiths Association, an ABANA chapter and registered with the Bureau of Apprenticeship and Training, United States Department of Labor. Before someone is accepted as a journeyman blacksmith, they need to be able to perform the following productively, quickly and accurately. It is a good self check list on the skills you need to develop in your craft. Text in dark red , in parentheses and with letter designations are the additions of Jock Dempsey, anvilfire guru, for his students. a. Apprentice will keep sketchbook(s) and notes detailing their work, ideas, and progress toward becoming a Journeyman. b. Show proficiency in shop math, mensuration and layout. Measure a sample block of metal and calculate its weight to within 1% or less. Create a layout with bluing using scriber, punch and dividers with exterior outline and an odd number bolt circle. c. Learn to drive a straight shift. This may serve well in an emergency and also applies to operating trucks and heavy machinery. 1. Drawing Out: Draw a bar to a point or dress an edge or point a tool. Produce short, medium and long tapers and points by hand. 2. Upsetting: Upset to at least 1½ times the diameter or width of a bar on the end and in the middle. 3. Bending: Make a ring out of bar stock or flat stock; forge a square corner right angle bend in square stock. 4. Punching, slitting and decorative punch work: Show an example of decorative punch work; punch a hole in a bar the same size as the width of the bar.
    [Show full text]
  • Metal Forming Progress Since 2000 CIRP Journal of Manufacturing
    CIRP Journal of Manufacturing Science and Technology 1 (2008) 2–17 Contents lists available at ScienceDirect CIRP Journal of Manufacturing Science and Technology journal homepage: www.elsevier.com/locate/cirpj Review Metal forming progress since 2000 J. Jeswiet a,*, M. Geiger b, U. Engel b, M. Kleiner c, M. Schikorra c, J. Duflou d, R. Neugebauer e, P. Bariani f, S. Bruschi f a Department of Mechanical Engineering, Queen’s University, Kingston, Ontario, Canada K7L 3N6 b University of Erlangen-Nuremberg, Germany c University of Dortmund, Germany d Katholiek Universiteit Leuven, Belgium e University of Chemnitz, Germany f University of Padua, Italy ARTICLE INFO ABSTRACT Keyword: Considerable changes have occurred in metal forming in the last decade. A record of these changes can be Metal forming found in keynote papers presented by the members of the Scientific Technical Committee—Forming, at the CIRP Annual General Meeting each year. The keynote papers are excellent references on important developments in metal forming and are used as a reference, globally. Not only is this paper a compendium of most of the keynotes presented, but from 2001 onward, it has updates on new information on five keynote subject areas. The authors of each keynote have written an update with new information that has developed since the writing of the keynote. The authors of each section are shown in order of presentation. ß 2008 CIRP. Contents 1. Introduction . 3 1.1. CIRP metal forming keynotes. 3 2. Microforming...................................................................................................... 3 2.1. Introduction . 3 2.2. Problems in the microworld . 4 2.3. Basic research—effects of miniaturisation .
    [Show full text]
  • Lecture Notes on Metal Forming Process
    LECTURE NOTES ON METAL FORMING PROCESS 2019 - 2020 III B.E VI Semester Mr. Sachin Pande, Assistant Professor SECAB INSTITUTE OF ENGINEERING AND TECHNOLOG Navraspur Bagalkot road,Vijaypur – 586101 Department of Mechanical Engineering Page 1 METAL FORMING B.E, VI Semester, Mechanical Engineering [As per Choice Based Credit System (CBCS) scheme] UNIT 1 Stress, strain, Two dimensional stress analysis and three dimensional stress analysis, relation between engineering stress and true stress, relation between engineering strain and true strain, yield criteria, yield locus, theory of plasticity, Hot working, cold working, strain hardening, recovery, recrystallisation and grain growth, Comparison of properties of Cold and Hot worked parts UNIT II ROLLING: Bulk deformation processes - Economics of bulk forming, principles and theory of rolling, types of Rolling mills and products. Forces in rolling and power requirements, applications and, limitations, defects in rolled products - machinery and Equipment. FORGING PROCESSES: Principles of forging -Types Forging - Smith forging, Drop Forging - Roll forging - Forging hammers: Rotary forging - forging defects, Forces in forging of strip, disc and power requirements, applications, Equipment and their selection. UNIT III EXTRUSION PROCESSES: Basic extrusion process and its characteristics. Mechanics of hot and cold extrusion - Forward extrusion and backward extrusion - Impact extrusion Hydrostatic extrusion, forces in extrusion of cylindrical and non cylindrical components - characteristics and defects in extruded parts. Wire Drawing: Process Mechanics and its characteristics, determination of degree of drawing, drawing force, power, and number of stages-defects in products. UNIT IV Sheet Metal Working - Economical Considerations - Stamping, forming and other cold working processes: Blanking and piercing - Bending and forming - Drawing and its types - Cup drawing and Tube drawing - coining - Hot and cold spinning.
    [Show full text]
  • MW Article Index
    MW Article Index Article Title Author Name Subject Issue Page A Rocking, Swinging Grinder Table Harold Mason Shop Machinery MW Vol. 01 No. 1 Feb-Mar 1988 4 Old Lathe Collet Adapters Philip Duclos Lathes MW Vol. 01 No. 1 Feb-Mar 1988 12 A Vernier Dividing Head Alberto Marx Shop Machinery MW Vol. 01 No. 1 Feb-Mar 1988 16 Surface Grinding On a Vertical Mill Aubrey Keet Mills MW Vol. 01 No. 1 Feb-Mar 1988 19 A Band Saw Speed Reducer Bob Nelson Shop Machinery MW Vol. 01 No. 1 Feb-Mar 1988 22 Curved Spoke Flywheel Philip Duclos Projects MW Vol. 01 No. 2 Apr-May 1988 4 A Double-ended Dial Indicator Adapter Guy Lautard Shop Machinery MW Vol. 01 No. 2 Apr-May 1988 12 Automatic Carriage Stop R. P. Lebaron Lathes MW Vol. 01 No. 2 Apr-May 1988 15 A Reverse for a Small Lathe E. T. Feller Lathes MW Vol. 01 No. 2 Apr-May 1988 16 Belt Sander Robert S. Hedin Shop Machinery MW Vol. 01 No. 2 Apr-May 1988 20 Basic Metal Finishes James B. Harrill General Machining Knowledge MW Vol. 01 No. 3 Jun-Jul 1988 3 Make Your Own Collet Chuck Pat Loop Lathes MW Vol. 01 No. 3 Jun-Jul 1988 4 Adjustable Try Squares Ted Wright Shop Accessories MW Vol. 01 No. 3 Jun-Jul 1988 8 Brass Hammer Bill Davidson Shop Accessories MW Vol. 01 No. 3 Jun-Jul 1988 12 Unorthodox Mill/Lathe Grinder Philip Duclos Shop Machinery MW Vol. 01 No.
    [Show full text]
  • The Conventional Spinning and Flow Forming Essam K
    International Journal of Academic Engineering Research (IJAER) ISSN: 2643-9085 Vol. 3 Issue 6, June – 2019, Pages: 12-24 The Conventional Spinning and Flow Forming Essam K. Saied; Ayman A. Abd-Eltwab; M. N. El-sheikh Department of Mechanical Engineering Beni-Suef University Beni-Suef, EGYPT S. Z. El-Abden; M. Abdel-Rahman Department of Mechanical Engineering Minia University Minia, EGYPT Ibrahim M. Hassab-Allah Department of Mechanical Engineering Assiut University Assiut, EGYPT Abstract: The thin wall cup products are largely used in industries, it is usually made by a conventional spinning process to produce the cup shape, followed by wall thickness reduction process (Flow Forming) to reduce the cup wall thickness. There is no one process can perform a thin wall cup in one stroke. The deep drawing process with ironing at the same stroke is now being investigated in some literatures, but it still cannot reduce the wall thickness up to 50 or 70%. This article is aiming to investigate the conventional spinning process and the flow forming process; how these two processes conducted and the development in the two processes. A review of the two processes is included in this article. After that; suggestions for future work in the two processes and to conduct the two processes together are prescribed. Keywords—Conventional spinning, Flow forming, Thin wall cup 1. INTRODUCTION Production process is mainly a compound activity, concerned with people who have a broad number of disciplines and skills and a widespread kind of equipment, tools, and utensils with several levels of computerization, such as CPUs, robots, and other equipment.
    [Show full text]
  • 6. Metal Spinning, Flow Turning & Flow Forming
    ME5603 Metal Forming Technology METAL SPINNING, FLOW TURNING & FLOW FORMING By: A/P Lee Kim Seng METAL SPINNING, FLOW TURNING & FLOW FORMING Flow turning or spinning is the plastic deformation of metal to the shape of a rotating mandrel with forces applied by a tool or roller. A/P Lee Kim Seng METAL SPINNING, FLOW TURNING & FLOW FORMING (Cont..) It is an efficient and economical way of producing radial symmetrical parts such as cones, hemisphere and cylinders etc. A/P Lee Kim Seng A/P Lee Kim Seng A/P Lee Kim Seng Tools Used in Metal Spinning, Flow Turning & Flow Forming A/P Lee Kim Seng Metal Spinning, Flow Turning & Flow Forming Processes in action A/P Lee Kim Seng A/P Lee Kim Seng A/P Lee Kim Seng In conventional metal spinning, a flat blank or preform is formed into another rotationallyrotationally symmetricalsymmetrical shapeshape with the aid of a stick tool or spinning roller. Each element in the blank undergoes appreciable radial displacement from its original position whereas the change in the thickness is virtually zero. A/P Lee Kim Seng A/P Lee Kim Seng Flow turning (sometimes known as power spinning, shear spinning, shear forming, spin forging and hydro spinning), resembles conventional spinning, in that a flat disc is transformed into final shape by localized plastic deformation between a mandrel and a roller. However, during flow turning, each element in the blank retains its radial position. A/P Lee Kim Seng The final wall thickness of the component is given by α tf = to sin o For preformed cone sin α t = t o f 1 sin β β (t1 = to sin ) A/P Lee Kim Seng The pre-requisite for flow turning is axial symmetry, thus allall conicconic sectionssections can be formed provided a mandrel is made for the required section and the roller can be made to describe the required profile.
    [Show full text]
  • Shell Mold Casting
    Shell Mold Casting Shell mold casting or shell molding is a metal casting process in manufacturing industry in which the mold is a thin hardened shell of sand and thermosetting resin binder backed up by some other material. Shell mold casting is particularly suitable for steel castings under 10 kg; however almost any metal that can be cast in sand can be cast with shell molding process. Also much larger parts have been manufactured with shell molding. Typical parts manufactured in industry using the shell mold casting process include cylinder heads, gears, bushings, connecting rods, camshafts and valve bodies. The Process The first step in the shell mold casting process is to manufacture the shell mold. The sand we use for the shell molding process is of a much smaller grain size than the typical greensand mold. This fine grained sand is mixed with a thermosetting resin binder. A special metal pattern is coated with a parting agent; (typically silicone), which will latter facilitate in the removal of the shell. The metal pattern is then heated to a temperature of (175 °C-370 °C) . The sand mixture is then poured or blown over the hot casting pattern. Due to the reaction of the thermosetting resin with the hot metal pattern a thin shell forms on the surface of the pattern. The desired thickness of the shell is dependent upon the strength requirements of the mold for the particular metal casting application. A typical industrial manufacturing mold for a shell molding casting process could be 7.5mm thick. The thickness of the mold can be controlled by the length of time the sand mixture is in contact with the metal casting pattern.
    [Show full text]