DOCSLIB.ORG

Rugged and Reliable Table of Contents

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Rugged and Reliable Table of Contents Professional Tools and Equipment Rugged and Reliable Table of Contents Table of Contents Icon Legend Screwdrivers, Nut Drivers, Pry Bars....................................3-7 .............Product is proudly made in the USA Standard (black, red, orange, green) and Professional Series Screwdrivers, Torq Screwdrivers, Nut Drivers, Hex Bits, Pry Bars (bent head, rolling head) 1/4” .............Product is 1/4-inch drive Sockets and Drive Tools.....................................................8-35 Drive Chrome Sockets, Impact Sockets, Spline Sockets, Crowsfoot, Torx Sockets (internal /external), 3/8” .............Product is 3/8-inch drive Flip Sockets, Spindle Nut Sockets, Hex Bit Sockets, Spark Plug Sockets, Universal Joints, Adapters, Drive Reducers, Extensions, Ratchets, Breaker Bars, T-handle, Spinner Handles 1/2” Drive .............Product is 1/2-inch drive Wrenches ...........................................................................36-50 Raised Panel Combination, High Polish Combination, Stubby, Flare Nut, Ratcheting Box, Ratcheting 3/4” Combination and Reversible Ratcheting, Adjustable Wrenches, Pipe Wrenches, Aluminum Pipe Drive .............Product is 3/4-inch drive Wrenches, Allen/Hex Wrenches 1” Pliers, Hammers, Punches, Chisels, and Files ...............51-56 Drive .............Product is 1-inch drive Needle Nose, Diagonal, Slip Joint, Groove Joint, Locking, Snap Ring, Ball Pein Hammers, Claw Hammer, Rubber Mallet, Brass Hammers, Files, Taper Punches, Center Punches, Pin Punches, Chisel, and Brass Punches .............Product has 6 internal points of contact Specialty Tools ..................................................................57-86 .............Product has 12 internal points of contact Tow Straps / Tie Downs, Brushes, Q-Bond Adhesive, Adhesive Tape, Measuring Tapes, Scrapers, Knives / Cutting Tools, Bolt Cutters, Riveters, Brake Tools, Hooks/Picks, Magnets and Mirrors, Specialty Pliers, Circuit Testers, Belt Tools, Barrel Pumps, Funnels, Filter Wrenches and Pliers, R .............Repair or replacement parts are available Flaring Tools, Pullers, Service Sets, and Torches i Brake, Tire, Wheel and TPMS ..........................................87-98 .............Product is also sold individually Brake Tools and Service Sets, Accutorq Torque Sticks and Sets, Torque Wrenches, Tire Inflators and Gauges, Tire Repair, TPMS Sensor Activation Tools and Service Tools LIFETIME WARRANTY*.............Product is covered by lifetime warranty Lighting ............................................................................99-108 Extension Cords and Reels, Drop Lights, Fluorescent Lights, LED Lights, Halogen Lights .............Oversized product ships via freight company Battery Testers and Booster Cables ...........................109-112 Battery Tools, Portable Power, Wheeled Chargers, Carried Chargers, Cables, Clamps Creepers, Carts, and Tool Storage..............................113-119 Creepers, Creeper Seats, Service Carts, Magnetic Tool Storage and Organization Shop Equipment............................................................120-131 Bench Grinder, Steel Vises, Bottle Jacks, Jack Stands, Engine Stands, Engine Crane, Rams, Trolly Jack, Service/Floor Jacks, Transmission Jacks, Hydraulic Presses, Trolley Jacks, Pallet Jack, Body Repair Kits, Parts Washers Air Tools, Electric Tools and PBE Tools.......................132-146 Air Impacts, Ratchets, Die Grinders, Drills, Hammers, Sanders, Polishers, Rivet Guns, Spray Guns, Electric Grinder, Electric Polishers, Pneumatic Bits, Bit Sets, Drill Bits, Drill Chucks, Abrasive Discs, Cut Off Wheels, Sander Pads, Regulators, Air Hose, Grinding Wheels Electrical and Hardware Components ........................147-174 Nylon Ties, Wire Strippers, Body Clip Pliers, Hose Clamp Pliers, Fuse Puller, Terminals, Wire Loom, Wire Clips, Primary Wire, Wire Connectors, Cable Clamps, Fuses (ATO, ATM, Maxi, Glo, Low Profile, Jcase, Glass, Copper Lugs, Shrink Connectors/Terminals, Solderless Terminals, Heat Shrink Tubing, Vacuum Caps/Tees, Grease Fittings, Drain Plugs and Gaskets, Brake Line, Brake Line Fittings, Adapters and Unions, Fuel Line, Fuel Line Repair Kits, Fuel Line Connectors, Clips, Adapters, Fuel Line Tools for Connecting and Installing, Service Kits, Hardware Kits (hitch pin, e-clip, cotter pins, snap rings, fuses, hex washers, o-rings, copper washers, grease fittings, roll pins, terminals). Displays and Merchandisers........................................175-192 Index by Part Number...................................................193-202 Index by Category .........................................................203-207 Warranty Information....................................................208-209 Safety Information ................................................................210 2 1.800.762.6002 | www.ktoolinternational.com Screwdrivers, Nut Drivers, Pry Bars www.ktoolinternational.com | 1.800.762.6002 3 Screwdrivers, Nut Drivers, Pry Bars KTI19700 KTI19000 8-Piece 8-Piece Orange Screwdriver Set Black Screwdriver Set Eight-piece screwdriver set includes: 1# Phillips 3” blade; #2 Phillips 1-1/2” stubby; #2 Eight-piece screwdriver set includes: 1# Phillips 3” blade; #2 Phillips 1-1/2” stubby; #2 Phillips 4” blade; stubby slotted; 3” slotted; 4” Phillips 4” blade; stubby slotted; 3” slotted; 4” slotted; 6” slotted; 8” slotted. Tools feature high quality chrome slotted; 6” slotted; 8” slotted. Tools feature high quality chrome vanadium blades, heavy-duty colored handles and hex bolsters for wrench assist. Pack- vanadium blades, heavy-duty colored handles and hex bolsters for wrench assist. Pack- aged with plastic tray. Orange handles. aged with plastic tray. Black handles. Set includes (also available individually): Set includes (also available individually): KTI19713 - #1 Phillips 3” KTI19703 - 3” slotted KTI19113 - #1 Phillips 3” KTI19203 - 3” slotted KTI19721 - #2 Phillips Stubby KTI19704 - 4” slotted KTI19121 - #2 Phillips Stubby KTI19204 - 4” slotted KTI19724 - #2 Phillips 4” KTI19706 - 6” slotted KTI19124 - #2 Phillips 4” KTI19206 - 6” slotted KTI19701 - Stubby slotted KTI19708 - 8” slotted KTI19201 - Stubby slotted KTI19208 - 8” slotted i LIFETIME LIFETIME WARRANTY* i WARRANTY* KTI19800 KTI19900 8-Piece 8-Piece Red Screwdriver Set Green Screwdriver Set Eight-piece screwdriver set includes: 1# Phillips 3” blade; #2 Phillips 1-1/2” stubby; #2 Eight-piece screwdriver set includes: 1# Phillips 3” blade; #2 Phillips 1-1/2” stubby; #2 Phillips 4” blade; stubby slotted; 3” slotted; 4” Phillips 4” blade; stubby slotted; 3” slotted; 4” slotted; 6” slotted; 8” slotted. Tools feature high quality chrome slotted; 6” slotted; 8” slotted. Tools feature high quality chrome vanadium blades, heavy-duty colored handles and hex bolsters for wrench assist. Pack- vanadium blades, heavy-duty colored handles and hex bolsters for wrench assist. Pack- aged with plastic tray. Red handles. aged with plastic tray. Green handles. Set includes (also available individually): Set includes (also available individually): KTI19813 - #1 Phillips 3” KTI19803 - 3” slotted KTI19913 - #1 Phillips 3” KTI19903 - 3” slotted KTI19821 - #2 Phillips Stubby KTI19804 - 4” slotted KTI19921 - #2 Phillips Stubby KTI19904 - 4” slotted KTI19824 - #2 Phillips 4” KTI19806 - 6” slotted KTI19924 - #2 Phillips 4” KTI19906 - 6” slotted KTI19801 - Stubby slotted KTI19808 - 8” slotted KTI19901 - Stubby slotted KTI19908 - 8” slotted LIFETIME LIFETIME i WARRANTY* i WARRANTY* KTI16000 10-Piece Professional Screwdriver Set Ten-piece professional screwdriver set includes the perfect assortment of slotted and Phillips screwdrivers for a variety of projects. Tools feature comfortable triangular grip, non-slip material and chrome vanadium blades. Ultimate professional quality. Includes: 3” slotted, 4” slotted, 6” slotted, 8” slotted and 1-1/2” stubby slotted and #1 Phillips, #3 Phillips, #2 x 4” Phillips, #2 x 10” Phillips and 1-1/2” stubby Phillips. Also sold in 5-piece slotted set, 5-piece Phillips set or individually. Available in sets or individually: KTI16001 - 5-piece Slotted Set KTI16002 - 5-piece Phillips Set KTI16201 - stubby slotted KTI16113 - #1 Phillips 3” KTI16203 - 3” slotted KTI16121 - #2 Phillips Stubby 1.5” KTI16204 - 4” slotted KTI16124 - #2 Phillips 4” KTI16206 - 6” slotted KTI16129 - #2 Phillips 10” KTI16208 - 8” slotted KTI16136 - #3 Phillips 6” LIFETIME i WARRANTY* 4 1.800.762.6002 | www.ktoolinternational.com KTI11035 34 Piece Screwdriver Set Set includes: 7 Phillips (#3x6", #2x4", #1x6", #1x3", #0x4", #0x3", #2x1-1/2"), 8 Slotted (5/16"x6", 1/4"x4", 3/16"x6", 3/16"x3", 5/32"x4", 1/8"x4", 1/8"x3", 1/4"x1-1/2"), 4 Torx (T10x4", T15x4",T20X4", T25x4"), 2 Square (S1x4", S2x4"), Bits Driver, 12 Bits (4 Slotted 1/8", 5/32", 3/16", 1/4"; 4 Phillips #0, #1, #2, #3; 4 Torx T10, T15, T20, T25) KTI11226 Phillips #3 x 6" KTI11006 Slotted 3/16" x 6" KTI11225 Torx T25 x 4" KTI18901 Phillips #1 KTI11224 Phillips #2 x 4" KTI11012 Slotted 3/16" x 3" KTI11001 Square S1" x 4" KTI18902 Phillips #2 KTI11230 Phillips #1 x 6" KTI11005 Slotted 5/32" x 4" KTI11002 Square S2" x 4" KTI18903 Phillips #3 KTI11223 Phillips #1 x 3" KTI11004 Slotted 1/8" x 4" KTI18009 Bits Driver KTI18910 Torx T10 KTI11231 Phillips #0 x 4" KTI11003 Slotted 1/8" x 3" KTI18904 Slotted 1/8" KTI18915 Torx T15 KTI11229 Phillips #0 x 3" KTI11010 Slotted 1/4" x 1-1/2" KTI18905 Slotted 5/32" KTI18920 Torx T20 KTI11221 Phillips #2 x 1-1/2" KTI11211 Torx T10 x 4" KTI18906 Slotted 3/16" KTI18925 Torx T25 KTI11009 Slotted 5/16" x 6" KTI11215 Torx T15
Load more

Recommended publications
  • Spanners and Wrenches
    Spanne rs and Wrench es - the various types open spanners - ring spanners - adjustable - box spanner - socket allen keys - torque wrench - pipe wrench - basin spanner - tips Spanners come in all shapes and sizes, many being developed to deal with a specific job. By far the most important consideration when using a spanner is to ensure that it fits the nut perfectly. Too loose, and it will round the comers of the nut - and slip, often damaging the nut. Spanner and your hand. When purchasing spanners, select good quality tools. The best types are forged from carbon steel or chrome vanadium, if not abused, these will last a lifetime. Open ended - 'C' spanner The open ended spanner is the most common type, and may have a single or double end. The head has its jaws offset by about 15 degrees from the run of the shaft. This is so the spanner can be turned over to engage different flats of a nut when working in confined spaces. Another version, called an obstruction spanner, is designed for use in confined spaces. It has one head set at anything upto 90 degrees to the shaft, and the shaft may have a slight curve. Ring spanner As the name implies, the ring spanner usually has a completely enclosed head, and may have six or 12 flats. A 12 flat spanner engages upon the corners of the nut and can engage both hexagon and square bolts. A six flat spanner is normally shaped to fit against all 6 sides of hexagon nuts, this ensures a very tight fit and can allow considerable force to be applied.
    [Show full text]
  • Boston & Maine Railroad Historical Society Incorporated
    Boston & Maine Railroad Historical Society Incorporated File 6. Hand Tools & Related Equipment Hardware Collection Old Hand Tools, Steam Era Vintage • Old railroad marked tools from the steam era used by workers in the roundhouse, shops, depots and for track maintenance. • The railroad marking is found somewhere on the metal or on the wood handle. • Example: • Adz – Axes – Box Car Mover – Brakeman’s Clubs – Chisels • Hack Saw - Hammers – Hand Saw - Hatches – Lining Bar – Mattock – Monkey Wrenches • Picks – Shovels - Sledge – Soldering Iron – Spike Mauls – Tie Tongs – Welding Torch Wrenches – Double-End with Jaws “S” shape - Boston & Maine Railroad Wood Tool Box /w leather strap From: Paul T. Kosciolek Collection Ice Pick Hammer Boston & Maine Railroad Ice Pick Hammer /w wooden handle Marked B&MRR on wooden handle Length 14” From: LeRoy Hutchins Collection Railroad Hammer Head’s Boston & Maine Railroad marked, Steel Hammer Head. From: Michael Tokarz New York New Haven & Hartford Railroad marked, Steel, Chisel Hammer Head From: Anonymous Donor Boston & Maine Railroad / Maine Central Railroad Assortment of Hand Tools Monkey Wrench’s Cold Chisel’s L/R Boston Concord & Montreal Railroad Monkey Wrench /w wood handle. Boston & Maine Railroad Monkey Wrench /w wood handle. No: 14 Monkey Wrench /w steel handle no markings. New York New Haven & Hartford Railroad 10.5.” Cold Chisel. Boston & Maine Railroad Cold Chisel. From: Paul T. Kosciolek Collection “S” Double End Flat Handle Wrenches L/R MECRR Double End “S” wrench 9” Length B&MRR Double End wrench 12” Length B&MRR Double End wrench 12” Length B&MRR Double End “S” wrench 13” Length B&MRR Double End wrench 14” Length From: Anonymous Donor “S” Double End Flat Handle Wrenches L/R B&MRR Double End “S” wrench 19” Length B&MRR Double End “S” wrench 19” Length B&MRR Double End “S” wrench 18” Length B&MRR Double End “S” wrench 18” Length B&MRR Double End “S” wrench 21” Length B&MRR Double End “S” wrench 24” Length From: Anonymous Donor Single End Track Wrenches Single End Track Wrenches L/R Tag No.
    [Show full text]
  • ST. CHARLES ANTIQUE TOOL AUCTION September 22, 2012, 9:35 AM Harvester Lions Club 4835 Central School Rd
    5th Annual ST. CHARLES ANTIQUE TOOL AUCTION September 22, 2012, 9:35 AM Harvester Lions Club 4835 Central School Rd. St. Charles (St. Louis), Missouri 63304 (preview Friday from 2 to 6:30 PM & Saturday 6:30 to 9:30 AM) We have 550+ lots or more of quality antique tools including wooden and iron planes; saws; levels; layout tools; screwdrivers; boring tools; wrenches; leather tools; and several household antiques and kitchen collectibles. 001._____ Stanley #5 30-inch plumb & level with laminated stock, brass corners and top plates, decorative brass side views for level vial, SEPT 1867 patent date stamped into wood, very good overall. 002._____ Pair of Stanley levels: 28 5/16-inch Stanley #3 with brass end and top plates, both vials intact, very good overall; plus a 28-inch #3 SW logo, both vials intact, partial decal on top, very good overall. 003._____ Pair of levels: 28-inch Stanley #0, one corner chipped, otherwise intact and very good; plus a 26-inch Stratton Brothers No. 1 brass bound, numerous nicks and dings, both vials intact, with a good scraping, this one will be very good. 004._____ Pair of Stanley levels: 26-inch brass bound No. 21, both vials intact, very good overall; plus a 24-inch No. 3 SW logo, both vials intact, fine overall. 005._____ Ohio Tool Co. 03C iron smooth plane, fine iron marked OHIO TOOL THISTLE BRAND AUBURN NEW YORK, nice original tote and knob, very good overall. 006._____ Winchester #3091 iron block plane with screw operated blade adjuster, nice original WINCHESTER blade, very good overall.
    [Show full text]
  • Catalog of Wrenches for the Antique Wrench & Tool
    CATALOG OF WRENCHES FOR THE ANTIQUE WRENCH & TOOL AUCTION SATURDAY, SEPT. 26 AT THE CLARION HOTEL & CONFERENCE CENTER 5202 North Brady Street - DAVENPORT, IOWA AUCTION STARTS AT 11: AM Saturday (approximately one half hour after Wrench Club Meet ends) Auction is open to the public CONTACT INFORMATION Auction Manager: Absentee Bids: Don 'Bus' Haury Stan Schulz 7913 SW 24th - Halstead, KS, 67056 659 E 9th - York, NE 68467-3109 316-284-7345 or 316-283-5876 402-362-7686 [email protected] [email protected] This auction originated as a consignment auction and we have received consignments from several people including Dough Busch who will be selling his collection over the next couple years, Dan Gaier, Don Ervin and Robert Matz. The bulk of the auction consists of the collection of Wilbur Hall of Wagner, South Dakota, His collection consists of several hundred wrenches and hammers and is especially strong in combination type tools. The hammers will be sold by The Great Planes Trading Company at auction in October in St. Louis. There will be a catalog on the Great Planes Trading Company Website at www.greatplanestrading.com by mid August. Terms of the sale: All bids & settlement in U.S. Currency. Cash or check with proper id. No items to be removed until settled for. Auction Co. & owners shall not be responsible for any accident or loss. Sold as is where is. No guarantees or warranties expressed or implied. Statements made sale day will take precedence over any printed ad. We are not able to accept credit cards at this auction.
    [Show full text]
  • Installation Instructions Revision A
    Bulletin 237542 Installation Instructions Revision A H5MPB-110 Connector for HELIAX®HJ5-50 Coaxial Cable Description Tools and Materials Required for Assembly This connector is designed for tab-flaring of the outer Knife Screw driver conductor and self-tapping (thread cutting) of the inner Flat file Hacksaw: conductor of the coaxial cable. It can be installed either Metal snips fine-toothed blade as gas pass or gas block, depending on which of the Plastic head mallet Wrenches: two insulators provided is used. Plastic rod (1) 5/16" (2) 2-3/4" monkey wrench Prepare the cable as shown and make certain Align the pencil marks and push the clamping nut 1 that the cable end is square. Use a straight- 3 over the gasket. Screw the nut into place so that edged piece of paper wrapped around the cable to the outer conductor is slightly exposed as shown. This guide the knife when cutting the jacket. File the cut action pulls the gasket into the correct position. Wipe edges of the conductors to remove rough spots and the silicone grease off the exposed outer conductor deburr the end of the inner conductor. Hold the cable and cut tabs as shown. downward and tap lightly to remove particles. Gasket 1-1/2" Jacket (38 mm) 3/16" (5 mm) Metal 3/32" snips (3 mm) Screw the clamping nut onto the cable. Unscrew Flare the tabs of the outer conductor against the 2 the clamping nut and mark the position at which 4 edge of the clamping nut by lightly tapping them the nut comes off the cable.
    [Show full text]
  • Damage Control Petty Officer (DCPO) (Matches AEL Revision Date NOV 2004) AEL 2-880044236/2-880044237 (Kit – Damage Cont Petty Offr (DCPO) Print Version (PDF)
    Damage Control Petty Officer (DCPO) (Matches AEL Revision date NOV 2004) AEL 2-880044236/2-880044237 (Kit – Damage Cont Petty Offr (DCPO) Print Version (PDF) The Damage Control Petty Officer (DCPO) Kit supports the Shipboard Damage Control PMS program for use by divisional DCPO’s to maintain damage control safety equipment located within each divisions zone of responsibility throughout the ship. The DCPO kit contains a wide array of tools as shown below. The DCPO kit has a line item with no quantity assigned on the Parent Damage Control Repair Station AELs to provide awareness about the kit. The total number of DCPO kits required onboard is determined by the Ship’s DCPO program and is reflected in the ship’s COSAL index with the AEL numbers above to determine the columns to use. (DAMAGE CONTROL PETTY OFFICER TOOL KIT) NSN 9999-LL-CQA-2445 QTY AR AVAIL The Damage Control Petty Officer (DCPO) Kit s contains a wide array of tools as shown below. The items are listed individually for inventory and replacement purposes. PAINT BRUSH WIRE BRUSH COLORED STICK CHALK (BRUSH, PAINT) (BRUSH, WIRE, SCRATCH) (CHALK ASSORTMENT, MA) NSN 8020-00-721-9650 NSN 7920-00-291-5815 NSN 7510-00-282-6294 QTY 1 AVAIL QTY 1 AVAIL QTY 1 AT AVAIL COTTER PIN ERASER JEWELERS FILE SET (COTTER PIN ASSORTMENT) (ERASER RUBBER) (FILE SET, HAND) NSN 5315-00-598-5916 NSN 7510-00-223-7046 NSN 5110-00-204-2685 QTY 1 AT AVAIL QTY 1 DZ AVAIL QTY 1 SE AVAIL PHOTO NEEDED MECHANICAL FINGER FLASHLIGHT GLOVES (FINGER, MECHANICAL) (FLASHLIGHT) (GLOVES, MEN’S) NSN 5120-00-629-6258 NSN
    [Show full text]
  • Damage Control Petty Officer (DCPO) (Matches AEL Revision Date JAN 2019) AEL 2-880044236/2-880044237 (Kit – Damage Cont Petty Offr (DCPO) Print Version (PDF)
    Damage Control Petty Officer (DCPO) (Matches AEL Revision date JAN 2019) AEL 2-880044236/2-880044237 (Kit – Damage Cont Petty Offr (DCPO) Print Version (PDF) The Damage Control Petty Officer (DCPO) Kit supports the Shipboard Damage Control PMS program for use by divisional DCPO’s to maintain damage control safety equipment located within each divisions zone of responsibility throughout the ship. The DCPO kit contains a wide array of tools as shown below. The DCPO kit has a line item with no quantity assigned on the Parent Damage Control Repair Station AELs to provide awareness about the kit. The total number of DCPO kits required onboard is determined by the Ship’s DCPO program and is reflected in the ship’s COSAL index with the AEL numbers above to determine the columns to use. (DAMAGE CONTROL PETTY OFFICER TOOL KIT) NSN 9999-LL-CQA-2445 QTY AR AVAIL The Damage Control Petty Officer (DCPO) Kit s contains a wide array of tools as shown below. The items are listed individually for inventory and replacement purposes. PAINT BRUSH WIRE BRUSH COLORED STICK CHALK (BRUSH, PAINT) (BRUSH, WIRE, SCRATCH) (CHALK ASSORTMENT, MA) NSN 8020-00-721-9650 NSN 7920-00-291-5815 NSN 7510-00-282-6294 QTY 1 EA AVAIL QTY 1 EA AVAIL QTY 1 AT AVAIL RAG COTTER PIN ERASER (CLOTH, CLEANING) (COTTER PIN ASSORTMENT) (ERASER RUBBER) NSN 7920-00-401-8034 NSN 5315-00-598-5916 NSN 7510-00-223-7046 QTY 1 (HD) AVAIL QTY 1 (AT) AVAIL QTY 1 (DZ) AVAIL PHOTO NEEDED JEWELERS FILE SET MECHANICAL FINGER FLASHLIGHT (FILE SET, HAND) (FINGER, MECHANICAL) (FLASHLIGHT) NSN 5110-00-204-2685
    [Show full text]
  • 1. Hammer 2. Screwdriver 3. Phillips Screwdriver 4. Wrench 5. Pliers 6. Hacksaw 7. Hatchet
    Tools 1. hammer 2. screwdriver 3. Phillips screwdriver 4. wrench 5. pliers 6. hacksaw 7. hatchet 8. monkey wrench 9. saw 10. hand drill 11. brace 12. chisel 13. scraper 14. vise 15. electric drill 16. (drill) bit 17. power saw 18. level 19. plane 20. toolbox 21. (paint) pan 22. (paint) roller 23. paintbrush/brush 24. paint 25. paint thinner 26. sandpaper 27. wire 28. nail 29. screw 30. washer 31. bolt 32. nut Toolbox adjustable wrench, wrench, screwdriver bits, screwdriver, tape measure, hammer, knife, socket, bull-nose pliers,needle-nose pliers, socket wrench, level, washer, nut, Allen key Drill bits :metal bit, reamer, carpentry bits, flat wood bit, secrity bit, masonry bit, wir strippers, solderring iron, wire cutters, electrical tape, scalpel Workshop circular saw , workbench, vice, drill bit, jigsaw, rechargeable drill, battery pack, electric drill, chuck, glue gun hacksaw, tenon saw, fretsaw, pipe cutter, wrench, pluger steel wool, miter block, sharpening stone, sandpaper, chisel, hand drill, file Workshop– Picture Dictionary Tools 1. box cutter 2. toolbox 3. tape measure 4. saw 5. hammer 6. nail 7. power saw 8. plane 9. workbench 10. power/ electric drill 11. (drill) bit 12. screwdriver 13. screw 14. hook 15. vise 16. sandpaper 17. pliers 18. wrench 19. ax/ axe 20. paintbrush 21. (paint) can 22. (paint) tray 23. (paint) rollerpaint 24. paint 1. carpenter’s rule, 2. C-clamp, 3. jigsaw 4. wood, 5. extension, 6. outlet, 7. grounding plug 8. saw, 9. brace, 10. wrench, 11. mallet 12. monkey wrench, 13. hammer, 14. scraper 15. pegboard , 16. hook, 17. hatchet, 18.
    [Show full text]
  • An Iconography of American Hand Tools
    Tools Teach An Iconography of American Hand Tools Hand Tools in History Series Volume 6: Steel- and Toolmaking Strategies and Techniques before 1870 Volume 7: Art of the Edge Tool: The Ferrous Metallurgy of New England Shipsmiths and Toolmakers Volume 8: The Classic Period of American Toolmaking, 1827-1930 Volume 9: An Archaeology of Tools: The Tool Collections of the Davistown Museum Volume 10: Registry of Maine Toolmakers Volume 11: Handbook for Ironmongers: A Glossary of Ferrous Metallurgy Terms: A Voyage through the Labyrinth of Steel- and Toolmaking Strategies and Techniques 2000 BCE to 1950 Volume 13: Tools Teach: An Iconography of American Hand Tools Tools Teach An Iconography of American Hand Tools H. G. Brack Davistown Museum Publication Series Volume 13 © Davistown Museum 2013 ISBN 978-0-9829951-8-1 Copyright © 2013 by H. G. Brack ISBN 13: 978-0-9829951-8-1 ISBN 10: 0982995180 Davistown Museum First Edition; Second Printing Photography by Sett Balise Cover illustration by Sett Balise includes the following tools: Drawshave made by I. Pope, 913108T51 Dowel pointer, 22311T11 Inclinometer level made by Davis Level & Tool Co., 102501T1 Expansion bit patented by L. H. Gibbs, 090508T6 Socket chisel, 121805T6 Bedrock No. 2 smooth plane made by Stanley Tool Company, 100400T2 Molders’ hand tool, 102112T3 Caulking iron made by T. Laughlin Co. of Portland, ME, TCX1005 T-handle wood threading tap, 102212T2 Silversmiths’ hammer head made by Warner & Noble of Middletown, CT, 123012T3 Wire gauge made by Morse Twist Drill & Machine Co. of New Bedford MA, 10910T5 Surface gauge made by Veikko Arne Oby of Whitinsville, MA, 21201T12 No.
    [Show full text]
  • FACOM SLS Attachment Solution, Preventing Any Risk of Accidental Falls
    CATALOG SEPTEMBER 2021 WRENCHES CATALOG WRENCHES ADJUSTABLE WRENCHES ADJUSTABLE WRENCH WITH REVERSIBLE JAW AND BIMATERIAL HANDLE Features: • G version fast adjustment: - Time gain: easy and fast moving jaw tightening on the nut using the button. 3 steps: - pull the button to release the moving jaw instantly. - adjust the moving jaw to the dimension required by hand. - if ne ... CODE 101.8G 101.10G 101.12G 101.15G 101.8GR PRICE € 22,37 € 28,88 € 41,63 € 65,79 € 16,10 CODE 101.10GR 101.12GR 101.15GR PRICE € 20,50 € 26,90 € 50,50 ADJUSTABLE WRENCHES, FAST ADJUSTMENT, METAL HANDLE Features: • Time gain: easy and fast moving jaw tightening on the nut using the button. 3 steps: - pull the button to release the moving jaw instantly. - adjust the moving jaw to the dimension required by hand. - if necessary, use the button tradi ... CODE 101.4 101.6 101.8 101.10 101.12 PRICE € 11,70 € 12,30 € 14,70 € 18,70 € 24,50 CODE 101.15 101.18 PRICE € 44,80 € 73,50 CHROMED ADJUSTABLE WRENCHES • Tool equipped with a FACOM SLS attachment solution, preventing any risk of accidental falls. • Good access to the button = easy setting. • Non-protruding moving jaw at maximum capacity. • Pre-adjustment of jaw opening thanks to millimetr ... CODE 113A.10C 113A.12C 113A.15C 113A.18C 113A.4C PRICE € 25,81 € 37,52 € 61,11 € 102,64 € 17,59 CODE 113A.6C 113A.8C 113C.24C PRICE € 18,74 € 19,87 € 187,24 CATALOG WRENCHES ADJUSTABLE WRENCHES MONKEY WRENCHES • Large capacity robust wrenches for heavy duty work.
    [Show full text]
  • Subject- Garage Eqipment
    SUBJECT- GARAGE EQIPMENT Screwdriver : It is a tool, manual or powered, for screwing and unscrewing (inserting and removing) screws. A typical simple screwdriver has a handle and a shaft, ending in a tip the user puts into the screw head before turning the handle. The shaft is usually made of tough steel to resist bending or twisting. The tip may be hardened to resist wear, treated with a dark tip coating for improved visual contrast between tip and screw—or ridged or treated for additional 'grip'. Handles are typically wood, metal, or plastiC and usually hexagonal, square, or oval in cross-section to improve grip and prevent the tool from rolling when set down. Some manual screwdrivers have interchangeable tips that fit into a socket on the end of the shaft and are held in mechanically or magnetically. These often have a hollow handle that contains various types and sizes of tips, and a reversible ratchet action that allows multiple full turns without repositioning the tip or the user's hand. A screwdriver is classified by its tip, which is shaped to fit the driving surfaces—slots, grooves, recesses, etc.—on the corresponding screw head. Proper use requires that the screwdriver's tip engage the head of a screw of the same size and type designation as the screwdriver tip. Screwdriver tips are available in a wide variety of types and sizes (List of screw drives). The two most common are the simple 'blade'-type for slotted screws, and Phillips, generically called "cross-recess" A wide variety of power screwdrivers range from a simple 'stick'-type with batteries, a motor, and a tip holder all inline, to powerful "pistol" type VSR (variable-speed reversible) Cordless drills that also function as screwdrivers.
    [Show full text]
  • Mechanics and the Essence of Technology
    MECHANICS AND THE ESSENCE OF TECHNOLOGY William J. Emerson III A Dissertation Submitted to the Graduate College of Bowling Green State University in partial fulfillment of the requirements for the degree of DOCTOR OF PHILOSOPHY May 2014 Committee: Ellen Berry, Advisor Monica A. Longmore Graduate Faculty Representative Radhika Gajjala Clinton F. Rosati ii © 2014 William J. Emerson III All Rights Reserved iii ABSTRACT Ellen Berry, Advisor The mechanic is a worker of contested meaning in American popular culture. The cultural significance of mechanics reflects technological trends throughout American industrial history. Mechanics have been revered and reviled, vilified and deified at various points in our national experience. This study will view the mechanic through same lens which our society has viewed technology, and in doing so will reveal a more intimate, essential relationship between the mechanic and technology. During the Industrial Revolution, mechanics were highly regarded as industrial workers and it was implied in radical fiction that they could repair social problems with the same acumen with which they fixed machines. The cultural significance of mechanics shifts definitively within popular consciousness after World War II. Later as the cultural capital of mechanics declined, there was an increasing trend for mechanics to destroy machines in popular literature to correct technology which was viewed as pathological. The shifting modalities surrounding the mechanic illustrate the trajectory of skilled information workers in the Twenty-first Century. Much like Henry Ford, the founders of Apple Computers worked out of a small shop (a garage in both instances) independently designing, assembling and engineering their products. The once insular and esoteric world of computers opened up to the public, however not all computer training was equally accessible to all parts of society.
    [Show full text]