International, Case IH
Inc.® Case IH IH/Farmall IH/Farmall Parts, Tony Martin from Ohio
Tractor Customer submitted photos
Thanks for giving us your Jedidiah Travis from Indiana Charlene M. Shumaker from Michigan best shot! The following photos were submitted by folks just like you in our annual catalog photo contest. OurSteiner complete album can be viewed at www.steinertractor.com/ tractor-photo-winners View more pictures and tractor stories at AntiqueTractorBlog.com
Billy DeSilva from Utah
240 STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm Chad Dawson from Minnesota Scott Peterson from New Jersey Madison Shepherd from Michigan Inc.® IH/Farmall IH/Farmall Case IH
Parts,
Bill Adams from TexasTractor Tim Waite from Michigan
Steiner
Kinsey Brandt from Missouri Leo Semmler from South Dakota
STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com 241 International: Alphabetical index
We carry a wide variety B C D of tractor parts for Brake parts Choke parts Dash light, parts IH/Farmall tractors. bolts...... 367 cables...... 273 bulb...... 291 Whether you want to boots...... 366 clip...... 273 dash light...... 291 repair or restore your cover...... 365 rod...... 273 lens...... 291, 317 classic, we have the cylinders...... 365 Cigarette lighters...... 302 Decals...... 388, 389 tractor parts you need! disc brake balls...... 368 Cluster gauges...... 294 Dipsticks...... 266 discs...... 367, 368 Clutch, trans. parts Distributor, parts A drum...... 365 alignment tools...... 339 - 341 brackets...... 302, 303 Air cleaner change gauge...... 294 dust covers...... 366 bearings...... 341 - 343 bushing...... 304 Air cleaner parts lined brake bands...... 367 block off plates...... 345 bushing & shim kit...... 305 bail...... 331 lock assist attachments...... 365, 366 bolt...... 343 caps...... 305, 306 caps...... 331 pawl pin...... 365 bolts...... 339, 345 clamps...... 305 clamps...... 331 riveting tools...... 366 boot...... 343 clip bracket...... 305 filter element...... 332 screw...... 365 brake buttons...... 340 clips...... 305 hoses...... 332 seal kit...... 368 bushings...... 339, 340, 342 coils...... 302, 303 oil cups...... 331 shaft seal...... 366 cable...... 345 condenser...... 306 pipes...... 331, 332 shafts...... 366 cam roller...... 345 distributor...... 304 vacuator valves...... 332 springs...... 365, 367, 368 carrier...... 343 drive gear...... 305 Alternators, parts Bull pinion shaft seal...... 370 coupler hub...... 344 drive housing...... 294 alternators...... 310, 311 Bull pinions...... 370 covers...... 345 dustInc.® covers...... 305, 306 bracket...... 311 discs...... 339 - 341 gasket...... 306 bracket kits...... 311 C dust cover...... 342 grommet...... 304 mounting kit...... 311 Cab parts gaskets...... 344 housing...... 304 pulleys...... 311 door strut...... 364 gears...... 343, 344 ignition tune up kits...... 305 shield...... 311 insulator...... 364 inspection cover...... 342 loom holder...... 304 Ammeters...... 290 roof hatch strut...... 364 inspection cover plates...... 343 plate...... 304, 305 Case IH window strut...... 364 kits...... 339 - 341 points...... 306
IH/Farmall IH/Farmall Axle parts bearings...... 357 Camshaft, parts park lock assy...... 345 resistor...... 303 bolster...... 356 bearing / bushing sets...... 265 pedal adaptor...... 343 rotor buttons...... 305, 306 bolster bracket...... 356 camshaft...... 265 pins...... Parts,339, 343, 345 shaft ...... 305 bolt...... 355 gears...... 265 pressure plates...... 339 - 341 shaft bushing & shim kit...... 306 bumper...... 355 lifters...... 265 release yoke...... 339, 340 spark plug wire sets...... 303, 304 bushings...... 356 Caps seals...... 344 spark plugs...... 304 gaskets...... 368 air cleaner...... 331 shafts...... 340, 344 spring clips...... 306 pins...... 355, 356 drain...... 285 shift cam detent...... 345 tags...... 306 seals...... 368 - 370 front hub...... 379 shift pattern plate...... 345 terminal insulator assys...... 305, 306 washers...... 356, 369 fuel...... 334, 335 shifter control arm repair kit.....345 terminal screw...... 305, 306 wide front center tube...... 356 oil fill / breather...... 266 springs...... 342, 345 tune-up kits...... 305, 306 oil filter drain...... 266 throw out bearing carrier...... 341 washer...... 305, 306 B power steering reservoir...... 353 throw out bearings...... 341, 342 Drawbars, parts Base engine kit...... 255 pre cleaner...... 333 torque amplifier button plug....345 bolts...... 385, 386 Battery boxes, parts radiator...... Tractor285 washer...... 343 brackets...... 385 anchor strip...... 298 rain...... 272, 273 Connecting rods...... 259 bushing...... 384, 385 battery boxes...... 297, 298 steering wheel...... 347, 348 Crankshafts, parts clevis...... 385 bushings...... 298 Carburetors, parts bearings...... 257, 258 crank arms...... 384, 386 covers...... 297 - 299 adjustment needle assy...... 275 crankshafts...... 255 drawbars...... 385 doors...... 298 bushing...... 275 gaskets...... 255, 256 guide straps...... 386 grommet...... 298 carburetors...... 274 gears...... 255 hardware...... 385 hardware...... 295, 297, 298 choke lever...... 274 pulleys...... 255 kits...... 386 j-bolt...... 298, 299 discs...... 275, 276 retainer...... 255 latch spring...... 384 lids...... 297, 298 drain trough...... 276 rod bolt lock tabs...... 260 lock...... 385 retainer...... 298 elbow strainer assy...... 274 seals...... 255, 256 pin retainer plate...... 386 trays...... Steiner299 floats...... 276, 277 Cultivator parts pins...... 384 - 387 Battery cables...... 296 fuel line fittings...... 274, 275 clamp & wedge assy...... 387 rods...... 386 clip...... 296 gaskets...... 276 wedge bolt & nut...... 387 screw housing...... 384 cover...... 297 idle tube...... 275 Cylinder heads...... 263 shaft & supports...... 386 Belt pulley parts main jets...... 275 nuts...... 263 top links...... 384 bearing...... 377 main nozzles...... 275 studs...... 263 block off plates...... 345 needle float valves...... 275 Cylinder kit...... 254 E seal...... 377 repair kits...... 277-281 Cylinder sleeve liners...... 254 Electric outlet socket, parts Boots.....343, 346, 347, 355, 366, 373, throttle shafts...... 275 boot...... 296 ...... 374, 376 venturis...... 276 D connector plug...... 296 Dash cowling...... 296,330 socket...... 296
242 STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm E G G H Electronic ignition kits...... 307 Gauges cont... Grilles, parts Hydraulic parts cont... Emblems / nameplates cluster gauges...... 292, 294 clips...... 327 strainers...... 374 clips...... 324 - 326 fuel...... 293 cowlings...... 327, 328 touch control block gasket kit..374 emblems...... 323 - 326 glow plug meter...... 291 grilles...... 328 touch control stop...... 371 hardware...... 324 oil pressure...... 291, 292 inserts...... 327, 328 washers...... 374, 375 Engine assy., break in lube...... 260 tachometers...... 294, 295 panel...... 328 Engine gasket sets...... 260 touch control temperature...... 292 repair patch...... 327 I Engine oil caps...... 266 water temperature...... 292, 293 screens...... 327, 328 Ignition parts Exhaust stacks, parts...... 272 Gear shift parts screw...... 327, 328 brackets...... 302, 303 boots...... 346, 347 spring...... 328 bushing...... 304 F fork...... 346 bushing & shim kit...... 305 Fan assys...... 288 knobs...... 346 H caps...... 305, 306 drive pulley assy...... 288 lever...... 346 Hand cranks, parts clamps...... 305 Fan belts...... 288 pattern inserts...... 346 brackets...... 327 clip bracket...... 305 Fan shroud...... 288 pin kit...... 346 cranks...... 327 clips...... 305 Fenders, parts...... 362 seal...... 346 pin...... 327 coils...... 302, 303 extension kit...... 362 spring...... 346 Headlights, parts condenser...... 306 extension plates...... 363 Gears bezels...... 319 distributor...... 304 grommet...... 362 camshaft...... 265 bulbs...... 317 - 319, 322 drive gear...... 305 insulator...... 362 crankshaft...... 255 gaskets...... 318, 322 Inc.®dust covers...... 305, 306 mounting brackets...... 362 drive gear...... 305 headlights...... 317 - 319 gasket...... 306 IH/Farmall u-bolts...... 362 flywheel ring...... 269 knobs...... 322 grommet...... 304 IH/Farmall
Fertilizer hopper...... 387 hydraulic pump...... 371 lens...... 322 housing...... 304 Case IH Final drive parts oil pump drive...... 268 panels...... 319, 320 loom holder...... 304 gaskets...... 368 steering sector...... 350 reflectors...... 322 plates...... 304, 305 seals...... 368 - 370 tachometer drive gear assy...... 294 rings...... 318, 322 points...... 306 washer...... 369 transmission...... 343, 344 terminal...... 322 resistor...... 303 Floor mat...... 364 Generator parts washer...... 318 rotor buttons...... 305, 306 Flywheel ring gears...... 269 band cover...... 309 Heat shields...... 330 shaft...... 305 Front grilles, parts...... 328 bearing, brush & bushing kit...... Hood, partsParts, shaft bushing & shim kit...... 306 Fuel filters ...... 309, 310 bolts...... 329 spark plug wire sets...... 303, 304 bail...... 336 belts...... 309 fastener...... 329 spark plugs...... 304 bowls...... 337 pulleys...... 309 hardware kit...... 328 spring clips...... 306 element...... 337 tags...... 310 hood extensions...... 329 tags...... 306 fuel filters...... 336, 337 Glow plug meter...... 291 hoods...... 328 terminal insulator assys...... 305, 306 gasket...... 337 Glow plugs...... 304 j-hook...... 328 terminal screw...... 305, 306 glass bowl...... 337 Governor controls, parts nuts...... 329 tune-up kits...... 305, 306 screen...... 336 assys...... 338 ornaments...... 323 washer...... 305, 306 Fuel gauges...... 293 cables...... 338 screws...... 329 Ignition/key switches...... 315 Fuel injector, parts discs...... 338 washers...... 329 Instrument panel housings.296, 330 injector...... 281 handle...... 339 Hose clamps...... 287, 332 seal...... 281 knob...... Tractor339 Hydraulic parts K sleeve...... 281 levers...... 338 boots...... 373, 374 Knobs...... 346, 348, 360, 372, 376 Fuel lines...... 337, 338 plate...... 339 control rods...... 372 fitting...... 338 repair keyway...... 338 cylinder repair kit...... 371 L Fuel pump repair kits...... 281 shaft...... 339 cylinders...... 353 Light bar...... 323 Fuel sending units...... 293 springs...... 338 decal...... 375 hardware...... 323 gasket...... 293 Governor, parts dipstick...... 370 Light brackets...... 323 Fuel tank parts arm...... 282 filters...... 373 - 374 hardware...... 323 caps...... 334, 335 bearing...... 282 friction discs...... 372 Light clamps...... 323 gaskets...... 335 bushing...... 283 gasket...... 372 Light switches, parts grommet...... 335 bushing sleeve...... 282 gears...... 371 knobs...... 316, 317 liner kit.Steiner...... 334 gasket ...... 282 hose guard...... 374 resistors...... 317 nut...... 334 governor...... 281 knobs...... 372 switches...... 316, 317 pads...... 334 repair kit...... 282 link lock...... 372 straightening tool...... 335 rockshaft...... 282 pin...... 372 M webbings...... 334 rod...... 283 plug...... 372 Magnetos, parts Fuse holder...... 302 seal...... 281, 283 port blocks...... 370, 371 caps...... 308, 309 seal and retainer...... 282 pumps...... 370, 371 clip...... 308, 309 G springs...... 282 retainer clip...... 372 coils...... 308, 309 Gauges throttle shaft rebuild kit...... 283 seal kits...... 371, 375 condensers...... 308, 309 air cleaner change...... 294 Grab handles...... 363 seals...... 371, 372 ammeter...... 290 springs...... 372, 374 Index continues on next page
STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com 243 International: Alphabetical index cont...
M P R S Magnetos, parts cont... Power steering parts Radiators, parts cont... Spark plug wiring sets...... 303, 304 covers...... 308, 309 bolt...... 352 nut...... 284 loom holder...... 304 gaskets...... 308, 309 cap...... 353 radiators...... 283 - 284 Spark plugs...... 304 insulator...... 309 couplers...... 353 spring...... 284 Starter hand cranks, parts magneto...... 308 filter...... 352 water pipe...... 286 brackets...... 327 manual...... 308 gaskets...... 353 Raincaps...... 272, 273 cranks...... 327 points...... 308, 309 mounting bracket...... 352, 353 Rear axle hub...... 382 pin...... 327 rotors...... 308, 309 port blocks...... 352, 353 Rebore kits...... 254 Starter, parts terminal screw...... 309 priority flow control valve...... 353 Rims, rear & front actuator lever and bracket...... 314 tune up kits...... 308 pulleys...... 352, 353 bolts...... 378, 382, 384 band covers...... 312 washer...... 309 pump...... 352 inner tube valves...... 382 brush & bushing kits...... 312, 313 Manifolds, parts seal & O-ring kit...... 352 nut...... 382 commutator end housing...... 313 adapters...... 250 torque generator...... 352 rear rim clamp...... 382, 384 drives...... 312 elbows...... 249 - 251 Pre-cleaner parts reinforcing ring...... 383 glow plugs...... 311 exhaust pipes...... 249, 250 assys...... 334 rims...... 380, 382 - 384 housings...... 312 ferrules...... 251 base...... 333 seal...... 380 keys...... 315 gasket material...... 251, 262 bowls...... 333 stops...... 384 knob...... 314 gaskets...... 249, 250, 252 caps assys...... 333 washer...... 382 levers...... 313 hardware kits...... 252 clip/springs kit...... 333 repair studs...... 312 heat control weight...... 251 covers...... 333 S rod...... Inc.®313 manifolds...... 249 - 251 pre-screener...... 333 Seats, parts spring...... 312 nuts...... 251, 252 screen...... 333 adjustment handle...... 360 starter armature...... 313 pipe extensions...... 250 PTO parts assys...... 359, 360 starter solenoids...... 312 sleeve (donut)...... 251 bearing kit...... 375 bearing...... 361 starter...... 312 spring...... 251 bearing retainer gasket...... 375 bolt...... 358, 361 switch box...... 314 stud...... 251, 252 bearings...... 375, 377 bolt kit...... 358 switches...... 312 - 315 Case IH washers...... 251, 252 belt pulley...... 375 brackets...... 357 tags...... 313 IH/Farmall IH/Farmall Manuals...... 390, 391 boot...... 376 bumpers...... 360 Steering parts Mufflers, parts brake band...... 376 bushings...... 360, 361 ball kit...... 352 clamps...... 269 clutch load spring plates...... 376 coils...... Parts,357, 358 bearings ...... 350, 351, 352 mufflers...... 270 - 272 clutch rebuild kit...... 376 cushions...... 359 bushings...... 350, 351 u-bolt...... 269 discs...... 376 frame...... 359 dust cover...... 352 drum...... 376 knob...... 360 gaskets...... 350, 351 O gasket...... 375 pads...... 358, 359 housing...... 350 Oil / breather caps...... 266 gasket kit...... 376 pans...... 357, 358 kit...... 350 gasket...... 266 grommet...... 375 pins...... 357, 358 nut...... 349 Oil filters...... 267, 268 guard...... 376 pivot support rods...... 361 pin stud...... 352 adapter kits...... 267, 268 knobs...... 376 plow clip...... 358 repair kits...... 351 Oil pan drain plug O-ring...... 377 retaining clip...... 358 retainer...... 350 dipstick conversion...... 266 over-running clutches...... 377 shafts...... 360 retainers...... 351 drain cap...... 266 seals...... 375,377 shock absorbers...... 361 seals...... 349 - 352 drain plug...... 266 shaft...... 375Tractor springs...... 357 - 360 sector gears...... 350 gaskets...... 266, 267 shields...... 376 support covers...... 360 sector shafts...... 349 petcock...... 266 shift collar...... 375 support plate kit...... 360 set screws...... 349 washer...... 266 shift lever & shaft...... 375 toolbox & seat supports...... 358 shaft...... 351 Oil pressure gauges, parts shift lever guide...... 375 tube assy...... 360 shaft cross & bearing...... 352 bulb...... 291 Pushrods...... 262 upholstered flip back seats...... 357 shafts...... 351 copper line kit...... 292 gaskets...... 263 Sediment bowl assys., parts support bearing assy...... 350 fittings...... 292 bail assys...... 336 support knuckles...... 349 gauges...... 291, 292 R gaskets...... 336 universal joint...... 352 jewel lens assy...... 291 Radiators, parts glass bowls...... 336 washers...... 351 switch...... 292 bolt kit...... 283 screens...... 336 worm shaft...... 350 Oil pump, partsSteiner caps...... 284, 285 sediment bowl assys...... 335, 336 Steering wheels, parts drive gear...... 268 clamps...... 287 Serial number tags, parts caps...... 348 gaskets...... 268 cores...... 283 rivets...... 326 center caps / emblems...... 347, 348 oil pump...... 268 drain pipes...... 283, 284 tags...... 326 cover...... 347, 348 springs...... 268 drain plugs...... 284 Shift quadrant light, part decal...... 347, 348 gaskets...... 283, 284 bulb...... 317 grommet...... 348 P hoses...... 286 - 287 light...... 317 knob...... 348 Pedal guards...... 370 housing...... 283 Side panels...... 330 lever...... 348 Piston ring sets...... 252, 253 mounting kit...... 284 Sleeve & piston kits...... 254 nuts...... 348, 349 Piston wrist pin bushings...... 253 mounting pads...... 285 Sleeve sealing o-rings...... 254 O-ring...... 347, 348 mud guards...... 284 plates...... 347, 349
244 STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm S T V W Steering wheels, parts cont... Tie rod parts Valve grind gasket sets...... 256, 261 Wheels, front & rear spinners...... 349 assy...... 355 Valve train kits...... 264 bearing kits...... 379 spring...... 348 bars...... 353, 354 Voltage regulators bolts...... 378, 384 steering wheels...... 347 - 349 boots...... 355 conversion kit...... 310 front hub cap...... 379 Steps...... 363 end assembly...... 353 cut out relay assy...... 310 front wheel clamp...... 378 ends...... 354, 355 regulators...... 310 hub...... 379 T jam nut...... 353 inner tube valves...... 382 Tachometers, parts tubes...... 354 W lock nut...... 378 bracket...... 294 Tires, tubes...... 381 Warning lights, parts...... 320, 321 nut...... 382 cable connector housing...... 294 nut...... 382 clamp...... 323 rear wheel clamp...... 384 cable connector housing clip...294 valves...... 382 flasher unit...... 321 reinforcing ring...... 383 cables...... 295, 296 Toolboxes...... 363, 364 Water jacket covers, parts retainers...... 379 connection housing plate...... 295 brackets...... 364 covers...... 288 rims...... 382 - 384 drive assy...... 294 decal...... 364 gaskets...... 288 seal...... 380 drive gear...... 294, 295 latch & spring assy...... 364 Water pumps...... 289 seals...... 378, 379 drive housing fitting...... 295 light bar...... 364 gasket...... 289 stops...... 384 tachometers...... 294, 295 u-bolt set...... 364 nut...... 290 wheels...... 380 Tail lights, parts Touch control temp gauge...... 292 pulley flanges...... 290 Wiring harness kits...... 299 - 301 bulbs...... 320, 322 Transmission parts seal...... 290 clips...... 300 clamp...... 323 bearing...... 343 studs...... 290 Inc.®grommets...... 302 flasher unit...... 321 Transmission pressure switch...... 302 Water temperature gauges junction blocks...... 301 IH/Farmall gaskets...... 320, 322 Transmission, clutch parts bracket...... 292 Wittek hose clamps...... 287, 332 IH/Farmall
knobs...... 322 alignment tools...... 339-341 gauges...... 292, 293 Case-IH lens...... 320, 322 bearings...... 341 - 343 Weight, front Y reflectors...... 322 block off plates...... 345 bracket...... 381 Yard spinner...... 387 rings...... 320, 322 bolts...... 339, 343, 345 locking cam...... 381 tail lights...... 320 - 321 boot...... 343 spacer...... 381 terminal...... 322 brake buttons...... 340 wheel...... 381 Thermostats, gaskets bushings...... 339, 340, 342 Weights, wheel gasket...... 287 cable...... 345 weightParts,...... 384 thermostats...... 287 - 288 cam roller...... 345 weight bolts...... 384 Three point hitch, parts carrier...... 343 bolts...... 385, 386 coupler hub...... 344 brackets...... 385 covers...... 345 bushing...... 384, 385 discs...... 339 - 341 International: Casting date codes clevis...... 385 dust cover...... 342 IH used casting date codes, which are usually found cast crank arms...... 384, 386 gaskets...... 344 upside down on the larger castings of a tractor. IH used drawbar lock...... 385 gears...... 343, 344 these date codes from 1931 to at least 1981. These letters drawbars...... 385 inspection cover...... 342 guide straps...... 385 inspection cover plates...... 343 can be used to partially date a tractor whose serial tag hardware kit...... 385 kits...... 339 - 341 is missing or stolen. All castings were generally used in kits...... 386 park lockTractor assy...... 345 production within six months of manufacture. By finding latch spring...... 384 pedal adaptor...... 343 this letter code, one can validate the year a tractor has pin retainer plate...... 386 pins...... 339, 343, 345 been claimed to be built. Tractors with mismatched date pins...... 384 - 387 pressure plates...... 339 - 341 codes may have had casting parts replaced or have been rods...... 386 release yoke...... 339, 340 built from several scrapped machines' casting parts. screw housing...... 384 seals...... 344 shaft...... 386 shafts...... 340, 344 Letter Year Cast Letter Year Cast shaft supports...... 386 shift cam detent...... 345 A...... 1931, 1955, 1976 N...... 1944, 1967 stabilizer bar...... 385, 388 shift pattern plate...... 345 B...... 1932, 1956 O...... 1945 top links...... 384 shifter control arm repair kit.....345 C...... 1933, 1957, 1977 P...... 1946, 1968 Throttle parts springs...... 342, 345 D...... 1934, 1958, 1978 Q...... 1947 assys...... Steiner338 throw out bearing carrier...... 341 E...... 1935, 1959, 1979 R...... 1948, 1969 boots...... 372, 373 throw out bearings...... 341, 342 F...... 1936, 1960, 1980 S...... 1949, 1970 cables...... 338 torque amplifier button plug....345 G...... 1937, 1961, 1981 T...... 1950, 1971 discs...... 338 washer...... 343 H...... 1938, 1962 U...... 1951, 1972 handle...... 339 Turbo chargers...... 252 I...... 1939 V...... Not used knob...... 339 J...... 1940, 1963 W...... 1951, 1973 levers...... 338 U K...... 1941, 1964 X...... 1952, 1974 plate...... 339 Umbrellas...... 387 L...... 1942, 1965 Y...... 1953, 1975 repair keyway...... 338 M...... 1943, 1966 Z...... 1954 shaft...... 339 V springs...... 338 Valve cover gaskets...... 262, 263
STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com 245 IH/Farmall: Beginning serial numbers
Except where Model I-1468, F-1468 1957...... 198231 1965...... 19406 1959...... 2467 1978...... 110479 indicated the 1971...... 7201 1958...... 204389 1966...... 21176 1960...... 5741 serial number plate 1972...... 7239 1959...... 211441 1967...... 23115 1961...... 8736 Model I-504, 2504 is generally found on 1973...... 9109 1960...... 214974 1968...... 24481 1962...... 11141 1961...... 501 left or right side of 1974...... 9670 1961...... 217382 1963...... 12032 1962...... 512 transmission housing 1962...... 220038 Cub 154, 184, 185 1963...... 3376 or clutch housing. Model I-1566, F-1566 1963...... 221383 Lo-Boy serial number Model I-350 1964...... 6797 1974...... 7101 1964...... 223453 name plate is located 1956...... 501 1965...... 10996 INTERNATIONAL 1975...... 7837 1965...... 225110 on the top left front 1957...... 1963 1966...... 14695 HARVESTER, 1976...... 12589 1966...... 227209 side of the main 1958...... 15049 1967...... 17992 FARMALL 1967...... 229225 frame. 1968...... 20392 Model I-1568, F-1568 1968...... 231005 Model IW-400 Model I-130, F-130 1974...... 7201 1969...... 232981 Cub 154 Lo-Boy 1954...... 501 Model I-544, 2544 1956...... 501 1975...... 7821 1970...... 234868 1968...... 3505 1955...... 510 1968...... 10250 1957...... 1120 1975...... 7975 1971...... 236827 1969...... 3773 1956...... 2187 1969...... 12699 1958...... 8363 1972...... 238506 1970...... 15502 1970...... 14589 Model 10-20 1973...... 240581 1971...... 20332 Model I-404, 2404 1971...... 16018 Model I-140, F-140 Gear Drive - KC 1974...... 242746 1972...... 23343 1961...... 501 1972...... 16838 1958...... 501 1923...... 501 1975...... 245651 1973...... 27538 1962...... 1045 1973...... 17341 1959...... 2011 1924...... 7641 1976...... 248618 1974...... 31766 1963...... 4205 1960...... 8082 1925...... 18869 1977...... 250832 1964...... 6452Inc.®Model I-560 1961...... 11168 1926...... 37728 1978...... 252109 Cub 184 Lo-Boy 1965...... 8292 1958...... 501 1962...... 16637 1927...... 62824 1979...... 253136 1978...... 46163 1966...... 9548 1959...... 1210 1963...... 21181 1928...... 89470 1979...... 48030 1967...... 10534 1960...... 3103 1964...... 25387 1929...... 119823 Cub Cadet 1968...... 11032 1961...... 4032 1965...... 28408 1930...... 159111 1961...... 590 Cub 185 Lo-Boy 1962...... 4944 1966...... 31285 1931...... 191486 1962...... 23675 1974...... 37001 Model I-424 1963...... 5598 Case IH
IH/Farmall 1967...... 34818 1932...... 201013 1963...... 49846 1975...... 37316 1964...... 501 1968...... 37352 1934...... 204239 1964...... 73875 1965...... 1402 Model I-574 1969...... 39906 1935...... 206179 1965...... 104307 Hydro 70 1966...... 7841 1970...... 329 1970...... 42300 1936...... 207275 1966...... 137051 1973...... Parts,7501 1967...... 13627 1971...... 350 1971...... 44424 1937...... 210235 1968...... 225056 1974...... 7570 1972...... 504 1972...... 46605 1938...... 212425 1969...... 280840 1975...... 8681 Model I-444 1973...... 7074 1973...... 48507 1939...... 214886 1970...... 322858 1976...... 10094 1967...... 501 1974...... 102961 1974...... 50720 1971...... 373301 1968...... 1190 1975...... 107880 1975...... 54273 Model 10-20 1972...... 417643 Hydro 100 1969...... 5720 1976...... 111783 1976...... 57773 Gear Drive - NC & NT 1973...... 457305 1973...... 7501 1970...... 9010 1977...... 114195 1977...... 60839 1926...... 501 1974...... 495749 1974...... 7727 1971...... 12357 1978...... 117065 1978...... 63111 1927...... 649 1975...... 536073 1975...... 10915 1979...... 64544 1928...... 832 1976...... 12434 Model IW-450 Model I-600 1929...... 1155 INTERNATIONAL 1956...... 501 1956...... 501 Model I-966, F-966 1930...... 1543 Model B-275 Model I-100 1957...... 568 1957...... 1986 1971...... 7101 1931...... 1750 Tractor1959...... 501 1954...... 501 1958...... 1662 1972...... 11815 1932...... 1833 1960...... 1720 1955...... 1720 Model I-606, 2606 1973...... 17794 1933...... 1912 1961...... 3415 1956...... 12895 Model I-454 1961...... 501 1974...... 22526 1934...... 1952 1970...... 501 1962...... 503 1975...... 28119 Cub Lo-Boy serial Model I-240 1971...... 508 1963...... 1702 1976...... 31772 Cub serial number number name 1958...... 501 1972...... 4908 1964...... 3214 name plate is located plate is located on 1959...... 4835 1973...... 8064 1965...... 5041 Model I-1066, F-1066 on the right side of the right side of 1960...... 8628 1966...... 6960 1971...... 7101 the steering gear the steering gear 1961...... 10079 Model I-460 1967...... 7922 1972...... 12677 housing. housing. 1962...... 10727 1958...... 501 1973...... 24205 1963...... 10789 1959...... 2711 Model I-650 1974...... Steiner34949 Cub Cub Lo-Boy 1960...... 6883 1956...... 501 1975...... 46855 1947...... 501 1955...... 501 Model I-300U 1961...... 9420 1957...... 688 1976...... 56672 1948...... 11348 1956...... 2555 1955...... 501 1962...... 11619 1958...... 11659 1949...... 57831 1957...... 3929 1956...... 30219 1963...... 11898 Model I-1466, F-1466 1950...... 99536 1958...... 6582 Model I-656, 2656 1971...... 7101 1951...... 121454 1959...... 10567 Model I-330 Model I-464 1965...... 8501 1972...... 10408 1952...... 144455 1960...... 12371 1957...... 501 1973...... 100003 1966...... 15505 1973...... 15533 1953...... 162284 1961...... 13904 1958...... 1488 1974...... 102196 1967...... 24372 1974...... 19746 1954...... 179412 1962...... 15506 1975...... 104775 1968...... 32007 1975...... 25404 1955...... 186441 1963...... 16440 Model I-340 1976...... 107128 1969...... 38861 1976...... 2951 1956...... 193658 1964...... 17928 1958...... 501 1977...... 108636 1970...... 42518
246 STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm 1971...... 45497 Model I-1026, 21026 1968...... 37352 Model 450 Model 756 Model 1456 1972...... 47951 1970...... 7501 1969...... 39906 1956...... 501 1967...... 7501 1969...... 10001 1971...... 9707 1970...... 42300 1957...... 1734 1968...... 9940 1970...... 10405 Model I-660 1971...... 44424 1958...... 22305 1969...... 14125 1971...... 14149 1959...... 501 Model I-1456, 21456 1972...... 46605 1970...... 17832 1960...... 3398 1969...... 10001 1973...... 48507 Model 460 1971...... 18374 Model 1466 1961...... 4259 1970...... 10025 1974...... 50720 1958...... 501 1971...... 7101 1962...... 5883 1971...... 10249 1975...... 54273 1959...... 4765 Model 766 1972...... 10408 1963...... 6995 1976...... 57773 1960...... 16902 1971...... 7101 1973...... 15533 Model I-4100 1977...... 60839 1961...... 22622 1972...... 7416 1974...... 19746 Model I-664 1966...... 8001 1978...... 63111 1962...... 28029 1973...... 9611 1975...... 25404 1972...... 2501 1967...... 8723 1979...... 64544 1963...... 31552 1974...... 12378 1976...... 29516 1973...... 3212 1968...... 8986 1975...... 14360 1974...... 3824 Model 200 Model 504 1976...... 16840 Model 1468 Model I-4156 1954...... 501 1961...... 501 1971...... 7201 Model I-666 1969...... 9219 1955...... 1032 1962...... 810 Model 806 1972...... 7239 1972...... 7500 1970...... 9365 1956...... 10904 1963...... 7000 1963...... 501 1973...... 9109 1973...... 8200 1964...... 7732 1964...... 4709 1974...... 9670 1974...... 11585 Model 230 1965...... 10696 1965...... 15946 1975...... 13131 Model I-4166 1956...... 501 1966...... 13596 1966...... 24038 Model 1566 1976...... 15739 1972...... 10001 1957...... 815 1967...... 15113 1967...... Inc.®34943 1974...... 7101 1973...... 10769 1958...... 6827 1968...... 16115 1975...... 7837 IH/Farmall
Model I-674 1974...... 11256 Model 826 IH/Farmall
1973...... 100001 1975...... 11684 Model 240 Model 544 1969...... 7501 Model 1568 Case IH 1974...... 101862 1976...... 12200 1958...... 501 1968...... 10250 1970...... 8153 1974...... 7201 1975...... 103172 1959...... 1777 1969...... 12541 1971...... 16352 1975...... 7821 1976...... 105946 4366, 4568 serial 1960...... 3415 1970...... 13585 1977...... 107639 number name plate 1961...... 3989 1971...... 14507 Model 856 Farmall A, AV, B, BN 1978...... 110254 is located on the left 1962...... 4124 1972...... 15262 1967...... 7501 serial number plate side on top step. 1973...... 15738 1968...... 9854 is located on the left Model I-706, 2706 Model 300 Parts,1969...... 19554 side of seat support. 1963...... 501 Model I-4366 1954...... 501 Model 560 1970...... 28693 1964...... 7073 1973...... 7501 1955...... 1779 1958...... 501 1971...... 32420 Model A, AV, B & BN 1965...... 21162 1974...... 7780 1956...... 23224 1959...... 7341 1939...... 501 1966...... 30288 1975...... 8616 1960...... 26914 Model 966 1940...... 6744 1967...... 38521 1976...... 10227 Model 340 1961...... 36125 1971...... 7101 1941...... 41500 1958...... 501 1962...... 47798 1972...... 11815 1942...... 80739 Model I-756, 2756 Model I-4568 1959...... 2723 1963...... 60278 1973...... 17794 1944...... 96390 1967...... 7501 1975...... 8001 1960...... 5411 1974...... 22526 1945...... 113218 1968...... 7672 1976...... 8368 1961...... 6642 Model 656 1975...... 28119 1946...... 146700 1969...... 8164 1962...... 7276 1965...... 8501 1976...... 31772 Note: Farmall A had 1970...... 8424 FARMALL 1963...... 7699 1966...... 15505 two serial numbers 1971...... 8427 Tractor1967...... 24372 Model 1026 in 1947, depending Model 100 Model 350 1968...... 32007 1970...... 7501 on where tractor was Model I-766 1954...... 501 1956...... 501 1969...... 38861 1971...... 9707 made: 1971...... 7101 1955...... 1720 1957...... 1030 1970...... 42518 1947 (Chicago)...... 1972...... 7416 1956...... 12895 1958...... 14674 1971...... 45497 Model 1066 182964 1973...... 9611 1972...... 47951 1971...... 7101 1947 (Louisville)...... 1974...... 12378 Model 130 Model 400 1972...... 12677 200001 1975...... 14360 1956...... 501 1954...... 501 Model 666 1973...... 24205 1976...... 16840 1957...... 1120 1955...... 2588 1972...... 7500 1974...... 34949 Farmall Super A 1958...... 8363 1956...... 29065 1973...... 8200 1975...... 46855 serial number is Model I-806, 2806 1974...... 11585 1976...... 56672 located on toolbox & 1963...... Steiner501 Model 140 Model 404 1975...... 13131 seat support. 1964...... 4709 1958...... 501 1961...... 501 1976...... 15739 Model 1206 1965...... 15946 1959...... 2011 1962...... 826 1965...... 7501 Model Super A 1966...... 24038 1960...... 8082 1963...... 1936 Model 706 1966...... 8626 1947...... 250001 1967...... 34943 1961...... 11168 1964...... 2259 1963...... 501 1967...... 12731 1948...... 250082 1962...... 16637 1965...... 2568 1964...... 7073 1949...... 268196 Model I-826, 2826 1963...... 21181 1966...... 2790 1965...... 21162 Model 1256 1950...... 281269 1969...... 7501 1964...... 25387 1967...... 2980 1966...... 30288 1967...... 7501 1951...... 300126 1970...... 8153 1965...... 28408 1968...... 3170 1967...... 38521 1968...... 8849 1952...... 324470 1971...... 16352 1966...... 31285 1969...... 13140 1953...... 336880 1967...... 34818 1954...... 353348
STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com 247 IH/Farmall: Beginning serial numbers cont...
Model C 1948...... 268991 1936...... 5387 Model O-6, ODS-6, Super W-6, W-6TA, 1938...... 7665 1948...... 501 1949...... 300876 1937...... 8501 OS-6, W-6, WD-6 WD-6 serial number 1939...... 9756 1949...... 22624 1950...... 327975 1938...... 12518 serial number plate plate is located 1940...... 10323 1950...... 47010 1951...... 351923 1939...... 14550 is located on the on the left side of 1951...... 71880 1952...... 375861 left side of clutch transmission Model 15-30 Gear 1953...... 390500 Model TD-40 compartment cover. housing. Drive Model Super C 1934...... 2501 Model O-6, OS-6, Model Super W6, (Prefix "TG") 1951...... 100001 Model Super H, HV 1935...... 2785 OD-6, W-6, WD-6 W-6TA, WD-6 1921...... 112 1952...... 131157 1953...... 501 1936...... 4393 1940...... 501 1952...... 501 1922...... 311 1953...... 159130 1954...... 22202 1938...... 7719 1941...... 1225 1953...... 2908 1923...... 1661 1954...... 187788 1939...... 8599 1942...... 3718 1954...... 8997 1924...... 6547 Model M, MD, MDV, 1943...... 5057 1925...... 13868 Model F-12 MV McCORMICK 1944...... 6313 Model Super WD9, 1926...... 26846 1932...... 501 1939...... 501 1945...... 9496 WDR-9 1927...... 48647 1933...... 526 1940...... 7240 O-4, OS-4, W4, I4, 1946...... 14153 1953...... 501 1928...... 64401 - 99925 1934...... 4881 1941...... 25371 Super W-4 serial 1947...... 17792 1954...... 1935 1935...... 17411 1942...... 50988 number plate is 1948...... 22981 1955...... 5232 Model Late 15-30, 1936...... 48660 1943...... 60011 located on the left 1949...... 28704 1956...... 6864 22-36 1937...... 81837 1944...... 67424 side of transmission 1950...... 33698 1929...... 99926 1938...... 117518 1945...... 88085 housing. 1951...... 38518 Model WR-9-S 1930...... 128237 1946...... 105564 1952...... 44318 1953...... 501Inc.®1931...... 150128 Model F-14 1947...... 122823 Model O-4, OS-4, 1953...... 45274 1954...... 550 1932...154508 - 156212 1938...... 124000 1948...... 151708 W-4, I4 1955...... 722 1934...156301 - 157477 1939...... 139607 1949...... 180514 1940...... 501 Model W-9, WD-9 1956...... 755 1950...... 213579 1941...... 943 serial number plate Model F-20 1951...... 247518 1942...... 4056 is located on the Model W-30 1932...... 501 - 3000 1952...... 290923 1943...... 5693 left side of clutch 1932...... 501 Case IH
IH/Farmall 1933...... 3001 - 6381 1944...... 7593 compartment cover. 1933...... 522 1934...... Model M, MD, MDV, 1945...... 11171 1934...... 548 ...... TA135000 - 135661 MTA, MV serial 1946...... 13934 Model W-9, WD-9, 1935...... 3182 1935...... 6381 - 32715 number plate is 1947...... 16022 WDR-9, WR-9Parts,1936...... 9723 1936...... 32716 - 68748 located on the left 1948...... 18880 1940...... 501 1937...... 15095 1937.....68749 - 105596 hand clutch housing. 1949...... 21912 1941...... 578 1938...... 23834 1938...... 105597 - 130864 1950...... 24470 1942...... 2993 1939...... 29922 1939...... 130865 - 134699 Model Super M, MD, 1951...... 28167 1943...... 3651 1940...... 32482 1940...... 135700 - 148810 MDV, MTA, MV 1952...... 31214 1944...... 5394 1952...... F501 1953...... 33067 1945...... 11459 McCORMICK Model F-30 1952 (Louisville)...... 1946...... 17289 DEERING 1932...... 501 - 1183 L500001 Model Super W4 1947...... 22714 1933...... 1184 - 4304 1953...... F12516 1953...... 501 1948...... 29207 Model O-12, O-14, 1934...... 4305 - 5525 1953 (Louisville)...... 1954...... 2668 1949...... 36159 Fairway 12 & 14 1935...... 5526 - 7031 L501906 1950...... 45551 1934...... 512 1936...... 7032 - 10406 1954...... F51977 TractorModel I-6, ID-6, I-9, 1951...... 51739 1935...... 1092 1937...... 10407 - 18683 1954 (Louisville)...... ID-9 serial number 1952...... 59407 1936...... 1626 1938...... 18684 - 26848 512541 name plate is located 1953...... 64014 1937...... 2277 1939...... 27186 - 28719 on left side of the 1954...... 67969 1938...... 3261 1940...... 29007 - 30026 Regular, Fairway clutch compartment 1939...... 3882 1924...... 501 cover. Model I-9, ID-9 Model H, HV serial 1925...... 701 1940...... 501 Model W-12 number plate is 1926...... 1539 Model I-6, ID-6 1941...... 578 1934...... 503 located on the left 1927...... 5969 1940...... 501 1942...... 3003 1935...... 1356 hand clutch housing. 1928...... 15471 1941...... 1225 1943...... 3651 1936...... 2031 1929...... 40370 1942...... 3718 1944...... 5501 1937...... 2768 Model H, SteinerHV 1930...... 75691 1943...... 5057 1945...... 11459 1938...... 3799 1939...... 501 1931...... 117784 1944...... 6371 1946...... 17294 1940...... 10653 1932...... 131872 1945...... 9518 1947...... 22715 Model W-14 1941...... 52387 1946...... 14198 1948...... 29207 1938...... 4134 1942...... 93237 Model T-20 1947...... 17317 1949...... 36350 1939...... 4610 1943...... 122590 1931...... 501 1948...... 24021 1950...... 45689 1944...... 150251 1932...... 551 1949...... 28868 1951...... 51739 Model W-40, WD-40 1945...... 186123 1933...... 2053 1950...... 35472 1952...... 59407 1935...... 501 1946...... 214820 1934...... 2528 1951...... 38518 1953...... 64014 1936...... 1441 1947...... 241143 1935...... 3276 1952...... 44318 1937...... 5120 1953...... 45274
248 STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm Manifolds, parts Manifolds, parts cont...
Part # USD Description / Application Part # USD Description / Application IHS961 $89.95 Manifold fits: Farmall Cub up to SN: IHS139GK $45.65 Gasket Set fits: F30, W30 gas; 248124 w/ engine up to ESN: 312389; Also fits 10-20 manifold gasket only Cub LoBoy (1955-68) (All w/ IHC Replaces: 10413DA, 19906D carburetor), Replaces: 251232R1 (carb gasket) USA made IHS1621 $29.99 IHS145 $69.99 Manifold fits: Cub SN: 248124 & up, Threaded Exhaust Pipe fits: F30, T9, 154, 184, 185 (All w/ Zenith carburetor) W30 gas (2-1/2” pipe thread Replaces: 251232R1, 405023R2 (2-7/8” O.D.) x 18” long) NOTE: Fits older Cubs, but looks NOTE: Customer must cut pipe to different than the IHS961. length. IHS145GK $8.55 Gasket Set (For IHS961, IHS145) IHS001 $129.95 USA made Manifold w/ IHS001EXP Exhaust Pipe IHS633 $19.99 fits: A, B, C & Supers, 100, 200 Replaces: 251175R1, R11, R21 Vertical Exhaust Pipe fits: Cub, (1” O.D. exhaust port at cylinder head) Cub LoBoy, Replaces: 350960R1 (1.304” O.D., 17” long) USA made IHS191 $149.95 Manifold (Threaded) fits: 130, 140, 230, 240, 330, 340,Inc.® 404, 424, 444, 2404, 2424, 2444, T4, T5, T340, 500 Crawlers, (C-123 IHS1223 $48.95 Exhaust Pipe Elbow (For Underslung engine SN: 36001 & up), C-135, C-146, IH/Farmall IH/Farmall
Exhaust) fits: Cub, Cub LoBoy C-153, Replaces: 369645R22, 388584R21 Case IH Replaces: 362359R1 (2-3/8” c.c. carb mount holes, 1-3/16” O.D. exhaust ports at cylinder head) IHS1227 $24.95 Exhaust Manifold Clamp w/ Hardware IHS001GK $5.99 Gasket Set (For IHS001, IHS191) (For Underslung Exhaust) fits: Cub, IHS001EXP $11.95 Cub LoBoy, Replaces: 362361R1 Parts,Exhaust Pipe fits: Same as IHS001, Engine parts IHS153 $199.95 IHS191 (1-1/2” NPT, 8-3/4” o/a Manifold fits: F12, F14, I12, I14, O12, length) O14, W12, W14 gas, Replaces: 3197D, 3196D IHS779 $76.50 Exhaust Pipe fits the following w/ IHS153GK $9.95 Gasket (For IHS153) USA made distillate manifolds: H, HV, W4, I4, NOTE: For carb gasket order ABC408. Super H, Super HV, Super W4 IHS808 $35.95 Replaces: 6713D (5” c.c. bolt holes) Exhaust Pipe w/ Flange fits: Same as NOTE: 2-bolt flanged. IHS153, Replaces: 41486DA, 41486DX IHS002C $159.95 Gas Manifold w/ IHS003EXP Pipe (16-1/2” o/a length, 2-3/4” c.c. bolt fits: H, Super H, I4, W4, (300, 350 hole) Tractor gas Row-Crop), Replaces: 8033DCY, 8033DCX, 362536R21, 358064R11 IHS136 $269.95 NOTE: Carburetor mounting holes are Gas Manifold fits: F20, T20 Crawler slotted. Replaces: HF122L IHS295 $199.00 High Performance Propane Manifold fits: H, I4, W4 NOTE: Increases IHS136GK $22.95 Gasket Set (For IHS136) horsepower of your gas tractor. IHS003EXP $12.99 Use your stock carburetor.
Exhaust Pipe fits: F20, T20 both gas Steiner IHS1244 $199.00 High Performance Propane Manifold Replaces: 361384R1 (2” pipe threads, fits: Super H, Super W4, 300, 350 Row- 2-1/4” O.D., 10-3/8” or longer) Crops gas, LP, Replaces: 363788R11 NOTE: Increases horsepower of your IHS139 $234.50 gas tractor. IHS002GK $8.95 Gasket Set (For IHS002C, IHS295, IHS1244) Manifold w/ Adapter fits: F30, W30 gas NOTE: Does not include exhaust elbow Replaces: 5167D, 5168D gasket for Utility tractors. Manifolds, parts continue on next page
STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com 249 Manifolds, parts cont... Manifolds, parts cont... Part # USD Description / Application Part # USD Description / Application IHS003B $176.25 IHS138 $184.50 Gas Manifold w/ Exhaust Pipe Manifold fits: 504, 2504, some 3514 w/ fits: M, Super M, MTA, I6, T6, W6, C-153 gas engine vertical & horizontal Super W6, 400, W400, 450, W450 gas; exhaust, Replaces: 377179R11 Serviceable for OS6 Replaces: 8035DDX, 362437R21 IHS138GK $8.99 Gasket Set (For IHS138) IHS138ELB $29.99 IHS659 $267.00 Propane Manifold fits: M, Super M, Exhaust Elbow fits: Same as IHS138 MTA, I6, T6, W6, Super W6, 400, W400, Replaces: 377947R1 450, W450 LP and gas; Serviceable for (1-1/2” pipe threads) OS6, Replaces: 358308R11 NOTE: 1-pc. like the OEM IH manifold. Increases IHS140 $249.99 horsepower on gas tractors. Manifold fits: I9, T9, U9, W9, WR9, 600, IHS003GK $7.99 Gasket Set (For IHS003B, IHS659) 650 gas, Replaces: 8321DBX IHS003EXP $12.99 Exhaust Pipe fits: H, M, W4, W6, IHS140GK $32.95 Gasket Set (For IHS140) USA made Supers, 300, 350, 400, 450 Replaces: 361384R1 (2” pipe threads, IHS963 $395.99 Manifold fits the following gas: 666, 2-1/4” O.D., 10-3/8” or longer) (2-piece) 686, 706, 756, 766,Inc.® 806, 826, 856, 2606; Hydros: 70, 86; Industrials: 3800, IHS845 $59.99 Exhaust Manifold Pipe Extension 3850; Serviceable for 656 (see website Fits the following diesels: MD, Super for more information); Will also fit following gas by purchasing IHS1236 MD, Super MTA-D, ID6, TD6, WD6, IHS154 $199.50 Adapter: 460, 560, 606, 660 ODS6, 400, 450, W400, W450 (Intake)
Case IH Replaces: 8328D, 361385R1 (2-3/8” IHS963 Replaces: 384290R2, 367261R1, IH/Farmall O.D.; 6-7/8” o/a length) USA made (368550R11, 390988R2 by ordering corresponding adapters) IHS567 $79.99 Parts,NOTE: Serviceable for 656, see Exhaust Elbow fits: 300 Utility gas, 350 website for more information. IHS004 $199.50 Utility gas, Replaces: 362298R1 IHS154 Replaces: 367261R11 (Exhaust) IHS004 Replaces: 384290R21; Castings 384290R1, 390988R1 IHS796 $5.95 Exhaust Elbow Gasket (For IHS567) (2-1/2” NPT pipe threads) USA made NOTE: The manifold heat exchanger is pre-assembled for both the IHS963 IHS935 $19.99 Extension Pipe fits the following w/ Engine parts & IHS154 manifolds. BD144, BD154 diesels: B250, B275, 276, 354, 364, 384, B414, 424, 434, 2300A, 2424, IHS004GK $26.79 Gasket Set (For IHS963, IHS154, IHS004) 3414, 3444, 7000 Forklift, TD5 Dozer; Will IHS1621 $29.99 Threaded Exhaust Pipe fits: Same as also fit 444, 2444 if pipeTractor is lengthened, IHS140, IHS004, IHS963 Replaces: 704614R1, 3072544R1, Replaces: 383974R2 704613R1 (1-55/64” O.D., 5.600” o/a (2-1/2” pipe thread (2-7/8” O.D.) length, 3.225” c.c. bolt pattern) x 18” long) NOTE: Customer must cut IHS214GK $9.85 Exhaust Manifold Gasket Set fits pipe to length. the following w/ BD144, BD154 C.I. IHS1619 $24.95 Threaded Exhaust Pipe fits the diesels: B250, B275, 276, 354, 364, 384, following gas, LP, diesel: F460, F560, B414, 424, 434, 444, 2300A, 2424, 3414, 656; Gas, LP: 454, 574, 674, 544, 606; 3444, 7000 Forklift, TD5 Dozer D282 diesel: 660, 706 SteinerReplaces: 704165R2 Replaces: 366780R1, 369613R1, IHS137 $149.99 Manifold fits: Some 454, 464, 574, 674, 370643R1 (2” NPT x 17-3/4” long) 2400A, 2400B, 2405B, 2410B, 2412B, NOTE: Must use IHS1236 adapter if 2500A, 2500B, 2505B, 2510B, 2514B, purchasing IHS004 manifold. 3400A, 3500A w/ C-157, C-175, C-200 IHS1236 $39.95 Offset Exhaust Manifold Adapter vertical exhaust, Replaces: 406046R1 fits: 460, 560, 606, 660; IH C-221, C-263, (2” pipe thread outlet) NOTE: Exhaust C282 gas motors gas (2” NPT adapter outlet is offset not centered. For exhaust to fit IHS004) NOTE: Use w/ IHS963 or pipe order IHS1619 & cut to length. IHS004 exhaust manifolds & IHS1619 IHS137GK $26.95 Gasket Set (For IHS137) USA made pipe.
250 STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm Manifolds, parts cont... Manifolds, parts cont... Part # USD Description / Application Part # USD Description / Application IHS2585 $5.99 Offset Manifold Adapter Gasket IHS1634 $19.95 7-pc. Gasket Set (For IHS930, IHS929) (For IHS1236), Replaces: 369282R2 USA made NOTE: 1 set used per engine. (5” o/a length, 4-1/16” c.c. bolt holes, IHS146 $74.95 1/2” bolt holes, 2-1/4” center hole I.D.) Exhaust Elbow fits: 1066, 1466, 1566, USA made 4166, 4366, 4186, 4386 IHS965 $19.95 Manifold Heat Control Weight fits: Replaces: 675316C2 460, 560, 606, 656, 660, 666, 686, 706, 756, 766, 806, 826, 856 gas, Replaces: IHS159 $39.95 85699R1 NOTE: Made of durable cast Sleeve / Donut (For IHS146) fits: 1066, iron. This IH manifold heat control 1466, 1566, 4166 - 4386 weight is sure to last. Replaces: 675317C2 IHS3353 $24.50 Manifold Heat Control Spring IHS160 $8.50 Sealing Rings (For IHS159) NOTE: 2 fits: 460, 560, 606, 656, 660, 666, 686, required per sleeve; Sold individually. 706, 756, 766, 806, 826, 856 gas Replaces: 82958R2 IHS147 $119.95
IHS2525 $14.95 Intake Manifold Pilot (Ferrule) fits: 460, Exhaust Elbow fits: 1026, 1256, 1456, 606, (Early 560, 660 up to engine SN: Industrial, Replaces:Inc.® 670034C1 7087) gas, LP, Replaces: 98573HA IH/Farmall (1.620” O.D.) USA made IH/Farmall NOTE: Measure dia. before ordering. Case IH CDB4111 $112.50 2 used per engine; Sold individually. Vertical Exhaust Manifold fits: Case IH IHS2533 $18.95 Intake Manifold Pilot (Ferrule) fits the 1190, 1194, Industrial; 380, 380CK gas, following w/ engine C263 SN: 7088 & diesel up: 560, 656, 660, 706 gas, LP; Fits the
following w/ engine C291 & C301: 666, CDB4125 $19.99 4-pc. Exhaust Manifold Gasket Set Engine parts 686, 706, 756, 766, 806, 826, 856 gas, LP Parts,(For CDB4111) Replaces: 138733R1 (1.630” step to ABC448 $19.99 1.690” O.D.) NOTE: Measure dia. Exhaust Manifold Gasket Material before ordering. 2 used per engine; (1/16” thick x 12” wide x 28-1/2” long) Sold individually. USA made NOTE: Perforated steel core. IHS932 $179.95 Exhaust Manifold Center Section fits the following naturally aspirated diesels: 806, 856, 2806, 2856; Combine: Early 815 (w/ D361 or D407 series engines), Replaces: 326699R1 Manifold hardware Part # USD Description / Application IHS2529 $116.85 Exhaust ManifoldTractor End Section fits the IHS2284 $1.25 Manifold High Nut fits: A, B, C, Supers, following diesels: 806, 856, 2806, 2856 (Early H up to SN: 106907), Cub, (M up Replaces: 326521R1 to SN: 41345), 100, 130, 140, 154, 184, 185, 200, 230, 240, 330, Early 340 gas, Replaces: IHS932GK $38.95 6-pc. Gasket Set (For IHS932, IHS2529) 251176R1, 93082H (3/8 - 24 NF, .535” tall, IHS930 $139.50 Rear Exhaust Manifold fits: 966, 986, 9/16” hex) NOTE: Zinc plated. Sold 1066, 1086, 1466, 1486, 1566, 1586, 3388, Individually. Cubs use 4 all others use 6. 3488, 3588, 3688, 3788, 4166, 4186, 4366, IHS4208 $4.99 4386, 5088, 5288, 5488, 6388, 6588, 6788, Manifold to Cylinder Head Stud fits: A, B, 7288, 7488, Hydro 100, Hydro 186, 815, C, Supers, 100, 130, 140, 200, 230, 240, 330, Steiner915, 1440, 1460, 1470, 1480 Combines: early 340 gas (3/8”) USA made All w/ D & DT 414, 436, 466 engines NOTE: 6 used per engine. Replaces: 675779C1 Sold individually. IHS929 $239.95 Front Turbo Exhaust Manifold ABC2308 $1.95 3/8” Manifold Washer fits: A, B, C, Supers, fits: 1066, 1086, 1466, 1486, 1566, 1586, (Early H up to SN: 106907), Cub, (M up 3388, 3588, 3788, 4166, 4186, 4366, 4386, to SN: 41345), 100, 130, 140, 154, 184, 185, 6388, 6588, 6788; Combines: 915, 1460, 200, 230, 240, 330, Early 340 gas, Replaces: 1470, 1480, Turbo charged engine: 24523D NOTE: Sold individually. 4 used DT414, DT436, DT466 on Cub, 6 used on all others. Replaces: 683564C91, 683562C1 Manifold hardware continue on next page
STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com 251 Manifold hardware cont... Turbo chargers, part Part # USD Description / Application Renew the performance of your engine with our line of new aftermarket turbo chargers. This turbo charger has all new IHS2288 $1.25 Manifold High Nut fits: Late H SN: 106907 components assembled in a state of the art factory that & up, M SN: 41346 & up, Supers gas, LP, specializes in manufacturing turbo chargers. O.E.M. quality diesel; I, O, T, W4, W6 series, Supers; 300 at an aftermarket USD - No core charge required. Includes - 450, 666 diesel - 1566 using D312, D360, mounting gaskets and an installation sheet. This is a direct D414, D436, D466 engines; 3388 - 7488 replacement for the listed applications. Replaces: 43715D, 37684H, 63460D, 260872R1, 682987C1 (7/16”-20 NF, .595” Part # USD Description / Application tall, 5/8” hex) NOTE: See website for full ABC3641 $389.99 Turbo Charger (NEW not rebuilt) w/ application. Sold individually. Mounting Gasket fits: 1066, 1086, 1466, IHS4214 $3.89 NEW! Manifold to Cylinder Head Stud 1486, 1566, 1586, 3388, 4100, 4156, 4166, fits: H SN: 106907 & up, M SN: 41346 & 4186, (4386 up to engine SN: 77300), up, W4, W6 SN: 1990 & up, Supers, 300 5088, 5288, 5488, 6388; Combines: Late - 450 gas, diesel; 666 - 1566, 3388 - 7488 915, 1460, 1470, 1480; Industrials: Late diesel (7/16” x 2-1/4”) USA made H65C, H70F, H80, 530 (All Loaders); NOTE: See website for all applications. E200 Scraper; TD20B Crawler SN: 4758 & up (All using TO4B18 & TO4B25 Air ABC2310 $1.95 1/2” Manifold Washer fits the following Research style turbo) using 7/16” NF nut: Late H SN: 106907 Replaces: 675795C91, A184785 & up, M SN: 41346 & up, Supers gas, LP, Inc.® diesel; I, O, T, W4, W6 series, Supers; 300 ABC3690 $499.99 - 450, 666 diesel - 1566 using D312, D360, D414, D436, D466 engines; 3388 - 7488 Turbo Charger (NEW not rebuilt) w/ Replaces: 43753D USA made Mounting Gasket fits: JX1070C, JX1070N, NOTE: See website for full application. JX1075C, JD1075N, (JX65 SN: 13287 & Case IH Sold individually. up), JX70 (All using Garret Air Research IH/Farmall TA2505 turbo), Replaces: 99462782 IHS1293 $4.50 Carburetor to Manifold Hardware Kit NOTE: Does not fit Mitsubishi turbo. & Vacuum Plug fits: H, W4, O4 Parts, ((2) 5/16” x 1-1/2” studs, (2) 5/16” UNF nuts, (2) 5/16” lockwashers, (1) 1/8” NPT ABC2511 $5.95 plug)
IHS1296 $4.95 Turbocharger to Exhaust Manifold Carburetor to Manifold Hardware Kit Mounting Gasket fits: 1066 - 7488 fits: Super H, Super W4, 300, 350 Replaces: 670073C1 USA made ((2) 3/8” x 1-1/2” studs, (2) 3/8” UNF Engine parts NOTE: See website for full applications. nuts, (2) 3/8” lockwashers, (1) 1/8” NPT plug) Tractor
Piston ring sets - USA made
Part # USD Application The following fit some Cub, Cub LoBoy, 154, 184, 185, UC60 Power Units 4-cyl. (All w/ C60 engine) SteinerIHS2104 $56.99 (2-5/8” std bore, (2) 0.093” compression rings, (1) 0.187” oil ring) IHS2106 $56.99 (0.020” overbore, 2.645” bore, (2) 0.093” compression rings, (1) 0.187” oil ring) IHS2108 $56.99 (0.040” overbore, 2.665” bore, (2) 0.093” compression rings, (1) 0.187” oil ring) The following fit some Late F12, F14 w/ 4 ring pistons; A, Early Super A, B, BN, C 4-cyl. NOTE: Measure old rings before ordering. Some F12, F14 engines had 5 groove pistons, the 5th groove NEVER had a ring from the factory. ABC2184 $119.99 3" bore, (3) 0.125" compression rings, (1) 0.250" oil ring ABC2110 $99.99 3" bore, (3) 0.125" compression rings, (1) 0.187" oil ring
252 STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm Tips on ordering Piston ring sets - USA made cont... an engine piston ring set:
Part # USD Application Measure old rings before The following fit some A, B, C, Supers, 100, 130, 140, 200, 230, 240 4-cyl. ordering. Do not order ABC2112 $123.99 3-1/8" bore/overbore, (3) 0.093" compression rings, (1) 0.250" oil ring by tractor model only. IHS2114 $78.99 3-1/8" overbore, (3) 0.125" compression rings, (1) 0.250" oil ring To ensure you order The following fit some H, HV, I4, O4, OS4, U4, W4 4-cyl. the correct rings, you will need the following IHS2116 $126.99 3-3/8" standard bore, (1) 0.125" & (2) 0.156" compression rings, (1) 0.250" oil ring information: ABC2072 $159.99 3-7/16" bore, (3) 0.093" compression rings, (2) 0.187" oil rings 1 Bore size The following fits some M, MV, I6, O6, Super M, Super MTA, W6, 400 gas, LP 2 Thickness of each ring ABC2082 $132.99 4" bore, (3) 0.093" compression rings, (1) 0.250" oil ring 3 Quantity of each ring The following fit some Super M, MTA, Super W6, 400, 450 4-cyl. gas, LP thickness per piston ABC2078 $139.99 4-1/8" bore, (2) 0.093" & (1) 0.125" compression rings, (1) 0.250" oil ring ABC2090 $77.99 4-1/8" bore, (3) 0.093" compression rings, (1) 0.250" oil ring Piston rings can not be The following fits some B250, B275, B276, B414, 354, 364, 384, 424, 434, 444, 454, 3414 4-cyl. Inc.®returned if opened. Call w/ BC144, C146 & C157 gas engines or email for USD and IH/Farmall availability of other sizes. IH/Farmall
ABC2170 $66.99 3-3/8" bore, (3) 0.093" compression rings, (1) 0.1875" oil ring Case IH
Piston wrist pin bushings Piston wrist pin bushings cont... NOTE: Sold individually. Requires reaming or boring after Part # USD Application
installation. See website for all applications. Engine parts IHS3781Parts, $3.95 Fits: 238, 274, B250, B275, B276, B414, Part # USD Application 354, 364, 374, 384, 434, (444, 2444 both IHS3738 $5.99 w/ British engine), 2300A, 3414, 3444, Fits: Cub, Cub LoBoy, 154, 184, 185, T5B, T5C, TD5, TD5B gas, diesel w/ C60 Power Units, Replaces: 251247R1, BC144, BD144, BD154 engines; Also fits 251247R2 (0.683” I.D., 0.760” O.D., the following diesels: 424, 2424, 2444, 500 0.874” o/a length) Crawler, Replaces: 3043611R1 (1.075” I.D., IHS3741 $7.50 1.175” O.D., 1.193” o/a length) Fits: A, B, C, F12, F14, Super A, Super C, IHS4231 $49.99 100, 130, 140, 200, 230, 240 gas, LP NEW! Fits: 400, W400 both w/ engine Replaces: 24415D, 64508D SN: 163808 & up, 450, W450 (.909” I.D., .993” O.D., 1.216” o/a length) Replaces: 364921R1 Tractor (0.989” I.D., 1.100” O.D., 1.510” long) IHS3744 $8.50 Fits: H, I4, O4, W4, Supers, (300 up to engine SN: 48044) (All using 1.109” IHS3750 $7.99 Fits the following diesels: 460 w/ engine wrist pin dia.), Replaces: 355454R91 SN: 5611 & up, 560 w/ engine SN: 6766 (1.104” I.D., 1.173” O.D., 1.312” o/a & up, 660 w/ engine SN: 4370 & up; 340, length) USA made 504, 606, 656, (706 w/ D282 engine) IHS3754 $11.95 Fits: M, MD, Super M, Super MD, MTA, (All using 1.125” wrist pin), Replaces: I6, O6, T6, W6, WD6, Supers, (400 gas, LP 306281R1, 306708R1 (1.113” I.D., 1.255” up to engine SN: 163807), (400, 450 both O.D., 1.312” o/a length) diesel) (All gas, LP, diesel unless noted IHS3757 $11.95 Fits the following diesels: 806, 856, 1026, Steinerw/ 1.312” wrist pin), Replaces: 45748DA, 1206, 1256 (All w/ D361, DT361, D407, 45748DAR (1.300” I.D., 1.416” O.D., DT407 engines using 1.500” dia. wrist 1.524” o/a length) pin), Replaces: 326562R1 (1.480” I.D., IHS3747 $5.99 Fits the following gas. LP: 300 engine 1.599” O.D., 1.400” o/a length) SN: 48055 & up, 350, 460, 544, 560, 574, IHS4221 $8.99 Fits the following diesels: 966 - 4166, 606, 656, 660, 666, 674, 686, 706, 756, 766, 986 - 4386, 3388 - 7488, Hydro 100, 806, 826, 856, Hydro 70, Hydro 86; Also Hydro 185 (All w/ D414, DT414, D436, fits early 460, 560, 660 diesel w/ .875” DT436, D466, DT466 engines), Replaces: wrist pin, Replaces: 364913R1, 70012R1 675006C1, 675006C2 (1.7255” O.D., (.850” I.D., .930” O.D., 1.248” o/a length) 1.6258” I.D., 1.390” length)
STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com 253 Rebore kits for Cub, Sleeve & piston kits cont... Cub LoBoy both up to Part # USD Application engine SN: 264567 IHS3093 $359.99 Fits: H, I4, O4, W4 gas w/ C-152 engine NOTE: Includes aluminum flat top pistons, Replaces: 374312R93, PK156 rings, wrist pins, retaining clips. (3.4375” overbore, stepped head Part # USD Application aluminum pistons) IHS4374 $188.50 NEW! Fits: Cub, Cub LoBoy both up to IHS3096 $379.99 Fits: M, I6, O6, T6, W6 w/ C-248 gas engine SN: 264567, Replaces: 251250R93 engine, Replaces: 374264R91, PK155 (Standard 2.625” bore size) (4” overbore, stepped head aluminum IHS3235 $194.99 (0.020” overbore) fits: Cub, Cub LoBoy pistons, 1.312” wrist pin O.D.) (Both up to engine SN: 264567) Replaces: 352183R94 (2.645” bore size) Cylinder kit IHS3238 $194.99 (0.030” overbore) fits: Cub, Cub LoBoy Fits: B414, 238, 374, 384, 424, 434, 444 (both up to engine SN: 264567) (All w/ naturally aspirated diesel BD154 (2.655” bore size) engines only) IHS3242 $194.99 (0.040” overbore) fits: Cub, Cub LoBoy (Both up to engine SN: 264567) Description Part # USD Replaces: 364856R94 NEW! Cylinder Kit...... Inc.®IHS4635...... $99.95 (2.665” bore size) NOTE: Does not fit gas. IHS3246 $194.99 (0.060” overbore) fits: Cub, Cub LoBoy (Both up to engine SN: 264567) (2.685” bore size) Case IH IH/Farmall Sleeve & piston kits Cylinder sleeve liners NOTE: Includes sleeves, pistons, piston Parts,NOTE: Alloy steel. ring sets, piston pins, pin retainers & sleeve sealing rings. Most other sets Part # USD Application available by special order. IHS4405 $89.99 NEW! Part # USD Application Fits: H, I4, O4, W4 Replaces: 366747R1, 8382DR IHS3060 $279.99 Fits: Some A, B, C, Supers, 100, 130, 140, (3-7/8” bore, 8-1/4” long) 200, 230, 240 w/ C113 up to engine SN: IHS4412 $89.99 NEW! Fits: I6, M, O6, T6, W6 310300 & C123 up to engine SN: 35830;
Engine parts Replaces: 366755R1, 8381DR Also fits F12, F14 w/ IH engine (4” bore, 10” long) USA made Replaces: 378277R91 (3.125” overbore, flat top aluminum pistons, 3.30” lower sleeveTractor seal O.D.) NOTE: Fits block casting 3193D, 4818D, 6342D, 6342DB, 6342DE, 6342DG, 6342DH, 251069R1, 366204R1, Engine sleeve sealing 366204R2, 367825R1. O-rings IHS3064 $279.99 Fits: Some Super A, C, Super C, 100, 130, NOTE: Includes (1) o-ring for (1) sleeve. 140, 200, 230, 240 w/ C113 engine SN: Measure before ordering. 310300 & up, C123 engine SN: 35830 & up, Replaces: 374493R93 Part # USD Application (3.250” overbore, stepped head IHS2117 $4.49 (For 1 cylinder) fits: Some A, B, C, Steineraluminum piston, 3.43” lower sleeve Supers, F12, F14, 100, 130, 140, 200, 230, seal O.D.) NOTE: Fits block casting 240, Replaces: 24434D (0.220” thick) 354898R1, R2, 356318R2, R3, 364111R2, NOTE: Must be used w/ engines w/ 366825R1 & others using 3.43” lower 3.30” lower sleeve dia. sleeve seal O.D. IHS2121 $6.39 IHS4653 $339.95 (For 1 cylinder) fits: Some A, B, C, NEW! Fits: B414, 238, 374, 384, 424, 434, Supers, 100, 130, 140, 200, 230, 240, 330, 444 (All w/ naturally aspirated diesel 340, 404, Replaces: 354881R1, 367799R1 BD154 engines only) NOTE: Does not (0.230” thick) NOTE: Must be used w/ fit gas. engines w/ 3.43” lower sleeve dia.
254 STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm Base engine kit Crankshafts, parts cont... Fits: Some C, Super A, Super C, 100, 130, Part # USD Description / Application 140, 200, 230, 240 w/ C113 engine SN: IHS2050 $199.99 Crankshaft Gear fits: 340 diesel, 504 310300 & up & C123 engine SN: 35830 & diesel, (454, 464, 544, 574, 666, 674, 686, up (3.250” overbore, flat top pistons, 3.43” 756, 766, 806, 826, 856, Hydro 70, Hydro lower sleeve seal O.D.) 86 gas, LP), (460, 560, 606, 656, 660 gas, Description Part # USD LP, diesel), 706 gas, LP, D282 diesel Base Engine Kit...... IHS3374...... $409.99 Replaces: 367272R1 USA made NOTE: Fits block cast 354898R1,R2, 366825R1 & others using 3.43" NOTE: 27 teeth. lower sleeve seal O.D. Order rod & main bearings separate to make IHS2387 $14.50 an out-of-frame kit. Verify block casting number before ordering. Rear Crankshaft Seal fits: Cub, Cub LoBoy, 154, 184, 185 (All using late retainer IHS4357), Replaces: 251378R92, 360662R91, 364692R91, 364861R91 Crankshafts, parts NOTE: For all models using later NOTE: Bearings not included. retainer. Must be used w/ late 251363R2 Part # USD Description / Application rear seal retainer (IHS4357), will not fit in early 251363R1 retainer. For engines IHS211 $299.00 Crankshaft fits: Cub, Cub LoBoy, 154, w/ the early retainer you need to also 184, 185, Replaces: 353743R93, 527821R92 purchase the IHS4537 retainer. (Bearings sold separately), Casting Inc.® 251264R1, 357247R1, 527456R1 IHS4357 $139.99 NEW! Rear Crankshaft Seal Retainer IH/Farmall NOTE: Does not include pilot bushing. IH/Farmall fits: Cub, Cub Lo-Boy, 154, 184, 185 If bushing is needed order IHS730. Case IH Replaces: 251363R2, (251363R21 retainer IHS431 $199.95 Crankshaft fits: B250 w/ engine SN: only) (3.876” seal area I.D.) 26077 & up, B275, 354, 364, 384, B414, NOTE: Uses IHS2387 seal. (424 diesel), 434, (444 diesel), 2300A, 3414, IHS2396 $6.25 BC144, BD144, BD154 gas, LP, diesel Crankshaft Rear Oil Seal Retainer Gasket Replaces: 751303R2 (1-1/16” wide fits: Cub, Cub LoBoy, 154, 184, 185 Engine parts flywheel flange) NOTE: For bearings Parts, Replaces: 251364R1 USA made order IHS3866, IHS3868. IHS019 $48.50 Crankshaft Pulley fits: Cub, Cub Lo-Boy IHS1307 $8.95 Front Crankshaft Seal fits: Cub, A, B, C, Replaces: 251269R3 (4-5/8” O.D.) Supers, 100, 130, 140, 154, 184, 185, 200, NOTE: For seal use IHS1307. Will not fit 230, 240, 330, 340, 404, 424, 444, 504 gas, 154, 184, 185. LP, Replaces: 389407R92 (1.875” I.D., 2.627” O.D., 0.312” wide) IHS020 $58.99 IHS2416 $18.50 Crankshaft Pulley fits: A, B, C, Supers, 13-pc. Rear Crankshaft Seal Kit w/ Felt 100, 130, 200, 230, Replaces: 6502DB Seals fits: A, B, C, Supers, 100 - 240, 330, NOTE: Press fit, not drilled/tapped. (340 gas up to engine SN: 100500); Rear Tractor 2-pc. felt only also fits F12, F14 For seal use IHS1307. USA made NOTE: See website for IHS901 $59.95 Crankshaft Gear fits: A, B, C, Supers (F12, replacement numbers. F14, but must restamp timing mark), 100, ABC131 $10.59 Front Crankshaft Seal fits: H, HV both 130, 140, 200, 230, 240, 330, 340, 404, 424, SN: 5416 & up, Supers, I4, O4, OS4, W4, 444, 504, 2404, 2424, 2444, 2504, 3444, (300, 350 gas, LP), Replaces: 53888D, 3514, T5, T340, 500 Crawlers 358787R91, 360692R91 Replaces: 24401D, 46870DA (2.000” I.D., 2.879” O.D., 0.312” wide) NOTE: 33 teeth. IHS2636 $24.50 IHS2044 $69.99 SteinerCrankshaft Gear fits: H, HV, I, O, W4 8-pc. Rear Crankshaft Seal Kit fits: H, series, Supers 300, 350 gas, LP Super H, I, O W4 series, 300, 350 gas, LP Replaces: 43706D USA made Replaces: 45014D, 379617R91 USA made NOTE: 24 teeth. IHS2445 $15.49 Front Crankshaft Seal fits: M, MD, IHS2046 $99.95 Supers, I, O, T, W6, WD6, 9 series, 400, Crankshaft Gear fits: M, MV, Supers, 450, 600, 650 gas, LP, diesel MTA, I, O, W, T6 series, 400, 450 gas, LP Replaces: 53872D, 357972R91 Replaces: 45627D USA made (2.625” I.D., 3.380” O.D., 0.475” wide) NOTE: 29 teeth. USA made
STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com 255 Crankshafts, parts cont... Crankshafts, parts cont... Part # USD Description / Application Part # USD Description / Application IHS2641 $34.95 18-pc. Rear Crankshaft Seal Kit fits: I6, IHS2411 $17.99 Rear Crankshaft Seal w/ Gasket & Rear M, O6, T6, W6, Super M & MTA, 400, 450 Main Cap Plugs fits: 460, 560, 606, 656, gas, LP, Replaces: 379618R1 USA made 660, (706 except German diesel) gas, LP, NOTE: Includes many extra outer diesel; 454, 464, 544, 574, 666, 674, 756, engine gaskets, see website for contents. 806, 826, 856 gas, LP; 340 diesel, 504 diesel IHS3936 $69.95 9-pc. Rear Crankshaft Seal Kit fits the Replaces: 393180R91, 403066R91, following diesels: 400 up to engine SN: 538983R1 (4.568” O.D., 4.000” I.D., 0.375” 13481, ID6, MD, Super MD, MTA, ODS6, wide) USA made NOTE: See website for TD6, WD6, Super WD6, WD6TA all applications. USA made NOTE: See website for IHS2062 $25.50 replacement numbers. (Front) Crankshaft Seal fits the following diesels: ABC1579 $11.95 Front Crankshaft Seal fits the following 666, 686, 766, (886 w/ D360), 966 - 1566, gas, LP, diesel: 460, 560, 606, 656, 660, 986 - 1586, 3388 - 7488 (All using D312, (706 except German diesel), 3616; Fits the D360, D414, D436, D466 engines) following gas, LP: 454, 544, 574, 666, 674, IHS2062: Replaces: 690437C91 686, 756, 766, 806, 826, 856; Hydros: 70, 86; IHS2060 $36.50 (3.000” I.D., 4.000” O.D., .500” wide) 2400, 2500, 3400, 3500A, 4500B; Fits the (Rear) following diesel: 340, 350, 504, (3514 w/ Inc.® IHS2060: Replaces: 691631C91 D-188), Replaces: 129370H1, 273573R91, (5.125” I.D., 6.135” O.D., .500” wide) 357672R91, 606750C91, 391976R91, 317549R91, 117568H1, 119020H1 (2.375” I.D., 3.355” O.D., 0.475” wide) ABC3953 $5.99 ABC2056 $10.99 Case IH Front Crankshaft Seal fits: 1468, 1568 both IH/Farmall Rear Crankshaft Seal fits: 350 w/ GD193 w/ DV550, Replaces: 300845C91 diesel, Replaces: 367717R91 (2.500” I.D., 3.500” O.D., .438” wide) (3.375” I.D., 4.381” O.D., 0.437” wide) Parts,
IHS2343 $9.99 IHS3084 $10.79 Front Crankshaft Seal fits: B250, B275, Crankcase Front Cover Gasket B276, B414, F12, F14, 238, 274, 354, 364, fits: Farmall Cub up to SN: 139516 374, 384, 424, 434, 444, 2300A, 3414, 3444, Replaces: 351675R1, 351675R2 (TD5, 500 Crawler) (All w/ BC144 gas, USA made BD144 diesel, BD154 diesel, Early C113
Engine parts gas), Replaces: 20290D, 3108650R91 (1.875” I.D., 2.875” O.D., 0.313” wide) IHS2350 $9.99 Crankcase Front Cover Gasket IHS3086 $15.99 Rear Crankshaft Seal fits the following fits: Farmall Cub SN: 139517 & up, Cub w/ engine SN: 26077 & Tractorup: B250, B275, LoBoy, 154, 184, 185, UC60 Power Units B276, B414, 238, 274, 354, 364, 374, 384, Replaces: 355945R1 424, 434, 444, 2300A, 3414, 3444, (TD5, USA made 500 Crawler) (All w/ BC144 gas, BD144 diesel, BD154 diesel) IHS1389 $18.75 Crankcase Front Cover Gasket (Timing Replaces: 3072092R1 (3.630” I.D., Gear Cover Gasket) fits the following 4.380” O.D., 0.435” wide) gas, LP Farmalls w/ C-113, C-123, C-135, IHS4647 $44.95 C-146, C-153: A, AV, B, BN, C, Supers, 100, NEW! Front Crankshaft Seal Kit 130, 140, 200, 230, 240, 330, 340, 404, 424, fits: 454, 464, 484, 574, 584, 674, 684, 856, 444, 504, 2404, 2424, 2444, 3514; Crawlers: Steiner956, 1056, 1246; Industrials: 278, 433 T340, T5, 500; Power Units: U2, U2A Replaces: 3136724R94 NOTE: See Replaces: 46179DC, DD website for all applications. IHS3260 $29.95 Crankcase Front Cover Gasket Set fits ABC1565 $14.00 the following gas, LP Farmalls w/ C-113, C-123, C-135, C-146, C-153: A, AV, B, BN, Front Crankshaft Seal fits the following C, Supers, 100, 130, 140, 200, 230, 240, 330, diesels: 806, 856, 1026, 1206, 1256, 1456 340, 404, 424, 444, 504, 2404, 2424, 2444, Replaces: 333750R91 3514; Crawlers: T340, T5, 500; Power (2.750” I.D., 3.756” O.D., .438” wide) Units: U2, U2A, Replaces: 43294DA USA made
256 STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm Crankshaft bearings NOTE: Measure bearings before ordering, no returns if package has been opened. Rod bearings are priced and sold per journal (2 halves) unless noted otherwise. Main bearings sold as engine set. See website for additional applications & serial number breaks
Part # USD Description Applications
The following fit Cub (1947-64), Cub LoBoy (1964-68) up to engine SN: 261717 using 251246R1 connecting rod IHS1945 $48.99 Standard Rod Bearing Set (.761” bearing width. (1.499”) standard rod journal) USA made IHS1942 $12.99 Standard Rod Bearing (.761” bearing width. (1.499”) standard rod journal) USA made IHS4030 $12.99 Connecting Rod Bearing (For 0.002” (1.497”) undersize rod journal) IHS2538 $12.99 Connecting Rod Bearing (For 0.010” (1.489”) undersize rod journal) (0.761” wide bearing) USA made IHS2540 $12.99 Connecting Rod Bearing (For 0.020” (1.479”) undersize rod journal) (0.761” wide bearing) USA made IHS4034 $12.99 Connecting Rod Bearing (For .030” (1.469”) undersize rod journal)
The following fit Late Cub w/ engine SN: 261718 & up (1968 & up), 154, 184, 185 (All using 527457R11 connecting rod)
IHS3217 $16.99 Standard Rod Bearing (Standard (1.499”) rod journal, 0.661” wide bearing) USA made IHS2542 $16.99 Connecting Rod Bearing (For 0.010” (1.489”) undersize rod journal) (0.661” wideInc.® bearing) USA made IHS3220 $16.99 Connecting Rod Bearing (For 0.020” (1.479”) undersize rod journal) (0.661” wide bearing) IH/Farmall The following fit Cub, Cub LoBoy, 154, 184, 185 IH/Farmall Case IH IHS1941 $56.99 Standard Main Bearing Set (Standard (1.624”) main journal) USA made IHS2828 $51.99 Main Bearing Set (For 0.010” (1.614”) undersize main journal size) USA made IHS2830 $84.99 Main Bearing Set (For 0.020” (1.604”) undersize main journal) IHS2832 $84.99 Main Bearing Set (For 0.030” (1.594”) undersize main journal) Engine parts The following fit A, B, C, F12, F14, Super A, Super C, 100, 130, 140, 200,Parts, 230, 240 (All w/ C-113, C-123 engines) IHS2532 $14.75 Standard Connecting Rod Bearing (For standard (1.750”) rod journal) IHS3997 $15.99 Connecting Rod Bearing (For 0.002” (1.748”) under sized rod journal) IHS2534 $15.99 Connecting Rod Bearing (For 0.010” (1.740”) undersize rod journal) USA made IHS2536 $15.99 Connecting Rod Bearing (For 0.020” (1.730”) undersize rod journal) USA made IHS4008 $15.99 Connecting Rod Bearing (For .030” (1.720”) under size rod journal) USA made The following fit A, B, C, Supers, 100, 130, 140, 200, 230, 240, (F12, F14 w/ 30925D crankshaft, but must relocate the tabs in the block & main caps) IHS2834 $64.99 Main Bearing Set (ForTractor (2.125”) standard main journal) IHS2836 $64.99 Main Bearing Set (For 0.010” (2.115”) undersize main journal) IHS2838 $64.99 Main Bearing Set (For 0.020” (2.105”) undersize main journal) IHS2840 $64.99 Main Bearing Set (For 0.030” (2.095”) undersize main journal)
The following fit (H, HV up to SN: 391357), (I4, O4, OS4, W4 up to SN: 33339); Fits crankshafts w/ casting 43734DB, 43734DC
IHS2449 $20.99 Standard Connecting Rod Bearing USA made IHS4044 $20.99 Connecting Rod Bearing (For .002” (2.246”) undersize rod journal) IHS2451Steiner$20.99 Connecting Rod Bearing (For 0.010” (2.238”) undersize rod journal) USA made IHS2453 $20.99 Connecting Rod Bearing (For 0.020” 2.228” undersize rod journal) USA made IHS2848 $84.99 Main Bearing Set (For (2.498”) standard main journal) USA made IHS2850 $84.99 Main Bearing Set (For 0.010” (2.488”) undersize main journal) USA made IHS2852 $84.99 Main Bearing Set (0.020” (2.478”) undersize main journal) USA made Crankshaft bearings continue on next page
STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com 257 Crankshaft bearings cont... NOTE: Measure bearings before ordering, no returns if package has been opened. Rod bearings are priced and sold per journal (2 halves) unless noted otherwise. Main bearings sold as engine set. See website for additional applications & serial number breaks
Part # USD Description Applications The following fit Late H SN: 391358 & up, (I, O, W4 SN: 33340 & up), Supers, 300, 350 gas, LP; Fits crankshafts w/ casting 43734DH, DG IHS2457 $16.50 Standard Connecting Rod Bearing (For (2.297”) standard rod journal) USA made IHS2459 $16.50 Connecting Rod Bearing (For 0.010” (2.287”) undersize rod journal) USA made IHS2461 $16.50 Connecting Rod Bearing (For 0.020” (2.277”) undersize rod journal) USA made IHS2854 $95.99 Main Bearing Set (For (2.558”) standard main journal) IHS2856 $84.99 Main Bearing Set (For 0.010” (2.548”) undersize main journal) USA made IHS2858 $158.99 Main Bearing Set (0.020” (2.538”) undersize main journal) USA made The following fit M, I, O, W6 gas series (up to mid 1951); Also fits crankshaft casting 45571DB, 45571DC IHS2463 $20.99 Standard Connecting Rod Bearing (For (2.498”) standard rod journal) USA made IHS4048 $20.99 Connecting Rod Bearing (For 0.002” (2.496”) undersize rod journal) IHS2465 $20.99 Connecting Rod Bearing (For .010” (2.488”) undersize rod journal) USA made Inc.® IHS2467 $20.99 Connecting Rod Bearing (For .020” (2.478”) undersize rod journal) USA made The following fit M up to SN: 278049; W6, O6 both up to SN: 35643; I6 up to SN: 35599; T6 up to SN: 7610 (All gas series w/ early C248 C.I. gas engine); Also fits crankshaft casting 45571DB, 45571DC IHS2860 $116.99 Main Bearing Set (For (2.748”) standard main journal)
Case IH IHS2862 $102.99 Main Bearing Set (For 0.010” (2.738”) undersize main journal) USA made IH/Farmall IHS2864 $102.99 Main Bearing Set (0.020” (2.728”) undersize main journal) USA made The following fit Late M, MTA, Supers, I, O, W6, 400, 450 gas, LP; Also fitsParts, crankshaft casting 45571DB, 45571DC IHS2469 $18.99 Standard Connecting Rod Bearing (For (2.548”) standard rod journal) IHS2471 $18.99 Connecting Rod Bearing (For .010” (2.538”) undersize rod journal) USA made
IHS2473 $18.99 Connecting Rod Bearing (For .020” (2.528”) undersize rod journal) USA made The following fit M SN: 278050 & up; I6, O6 both SN: 35600 & up; T6 SN: 7611 & up; W6 SN: 35644 & up; Super M, Super MTA, Super W6, 400, 450 gas, LP (mid 1951 & up); Also fits crankshaft casting 45571DD, 45571DE IHS2866 $87.99
Engine parts Main Bearing Set (For (2.808”) standard main journal) USA made IHS2868 $87.99 Main Bearing Set (0.010” (2.798”) undersize main journal) USA made IHS2870 $87.99 Main Bearing Set (For 0.020” (2.788”) undersize main journal) USA made The following fit 330, 340, T340, T5, TC5, TractorEarly 500 Crawler (All up to SN: 100500 w/ C135 gas) IHS2747 $24.99 Connecting Rod Bearing (For (1.810”) standard rod journal) USA made IHS2749 $24.99 Connecting Rod Bearing (For 0.010” (1.800”) undersize rod journal) USA made The following fit 404, 424, 444, 454, 504, 2400A - 3514, late C135, C146, C153, C157 C.I. gas, LP engines IHS3990 $23.99 Standard Connecting Rod Bearing (For (2.060”) standard rod journal) IHS3993 $23.99 Connecting Rod Bearing (For .010” (2.050”) undersized rod journal) IHS4000 $23.99 Connecting Rod Bearing (For .020” (2.040”) undersize rod journal) USA made IHS4004 $102.99 Main Bearing Set (For standard (2.625”) journal size) USA made The followingSteiner fit B250, B275, B276, B414, 238, 274, 354, 364, 374, 384, 424, 434, 444; Industrial: 2300A, 2424, 2444, 3414, 3444, 7000, TD5, TD5B, early 500 Crawler (All w/ BC144, BD144, BD154 gas, diesel engines) IHS3866 $26.99 Connecting Rod Bearings (Set of 4) (For standard (1.750”) rod journal) IHS3870 $26.99 Connecting Rod Bearings (Set of 4) (For .010” (1.740”) undersize rod journal) IHS3874 $26.99 Connecting Rod Bearings (Set of 4) (For .020” (1.730”) undersize rod journal) IHS3878 $12.99 Connecting Rod Bearings (Set of 4) (For .030” (1.720”) undersize rod journal) IHS3868 $47.99 Main Bearing Set (For standard (2.125”) main journal) IHS3872 $47.99 Main Bearing Set (For .010” (2.115”) undersize main journal)
258 STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm Crankshaft bearings cont... Part # USD Description Applications The following fit B250, B275, B276, B414, 238, 274, 354, 364, 374, 384, 424, 434, 444; Industrial: 2300A, 2424, 2444, 3414, 3444, 7000, TD5, TD5B, early 500 Crawler (All w/ BC144, BD144, BD154 gas, diesel engines) cont... IHS3876 $54.99 Main Bearing Set (For .020” (2.105”) undersized main journal) IHS3880 $51.99 Main Bearing Set (For .030” (2.095”) undersize main journal) The following fit 340 diesel, 504 diesel, (464, 544, 574, 666, 674, 686, 756, 766, 806, 826, 856, Hydro 70, Hydro 86 gas, LP), (460, 560, 606, 656, 660 gas, LP, diesel), 706 gas, LP, D282 diesel IHS2544 $10.99 Standard Connecting Rod Bearing (For standard (2.374”) rod journal) USA made IHS4039 $10.99 Connecting Rod Bearing (For .002” (2.372”) undersized rod journal) IHS2546 $10.99 Connecting Rod Bearing (For 0.010” (2.364”) undersize rod journal) USA made IHS2548 $10.99 Connecting Rod Bearing (For 0.020” (2.354”) undersize rod journal) The following fit 460, 560, 606, 656, 660, 706 gas, LP, D282 diesel; 666, 686, 756, 766, 806, 826, 856, Hydro 70, Hydro 86 gas, LP (All w/ 3-3/4" thrust bearing dia.) IHS2842 $91.99 Main Bearing Set (For standard (2.749”) main journal) IHS2844 $119.95 Main Bearing Set (For 0.010” (2.739”) undersize main journal size) IHS2846 $90.99 Main Bearing Set (For 0.020” (2.729”) undersize main journal) Inc.® The following fit 666, (686, Hydro 86 both w/ D312 engine), 766, 806, 856, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, IH/Farmall 1466, 1486, 1566, 1586, 3388; 3488, 3588, 3788, 4366, 4386, 5288, 5488, 6588, 6788, 7288, 7488 (All up to engine SN: 440035; 3688, IH/Farmall 4166, 4186, 5088, 6388, Hydros: 70, 100, 186, Industrials, Combines Case IH IHS3885 $13.99 Standard Connecting Rod Bearing (For (2.299”) standard rod journal) (1.200” wide bearing) USA made IHS3889 $13.99 Connecting Rod Bearing (For .010” (2.289”) undersize rod journal) (1.260” wide bearing) USA made IHS3891 $13.99 Connecting Rod Bearing (For .020” (2.279”) undersize rod journal) (1.260” wide bearing) USA made IHS3893 $13.99 Connecting Rod Bearing (For .030” (2.269”) undersizeParts, rod journal) (1.260” wide bearing) USA made Engine parts IHS3897 $126.99 Main Bearing Set (For standard (3.375”) main journal) (1.220” wide bearing (1-6)) USA made The following fit 966, 986, 1066, 1086, 1466, 1486, 1566, 1586, 3388; 3488, 3588, 3788 (All up to engine SN: 440035); 3688, 4166, 4186, 5088; 4366, 4386, 5288, 5488, 6588, 6788, 7288, 7488 (All up to engine SN: 440035; 6388, Hydro 100, Hydro 186 (All w/ D414, DT414, D436, DT436 & early D466, DT466 engines) IHS3903 $126.99 Main Bearing Set (For .010” (3.365”) undersize main journal) (1.220” wide bearing (1-6)) USA made IHS3908 $126.99 Main Bearing Set (For .020” (3.355”) undersize main journal) (1.220” wide bearing (1-6)) USA made IHS3914 $126.99 Main Bearing Set (For 0.030” (3.345”) undersize main journal) (1.220” wide bearing (1-6), .012” oversize flange thrust) USA made Tractor Connecting rods NOTE: Includes piston pin bushing. Rod bearings sold separately. See website for all applications.
Part # USD Application IHS3849 $32.50
Fits the following w/ British BC144, BD144, BD154 gas, diesel engines: B250, B275, B276, B414, 238, 274, 354, 364, 374, 384, 434, (424, 444 w/ English BC/BD engines only); Industrials: 500, 2300A, 2424, 2444, 3414, 3444, 7000, TD5, TD5B all using 3061214R91, 306215R1, 704088R91, 706132R1 connecting rod SteinerReplaces: Castings 3061215R1, 706132R1
IHS3883 $99.99
Fits: 966, 986, 1066, 1086, 1466, 1486, 1566, 1586, 3388, 3488, 3588, 3688, 3788, 4166, 4186, 4366, 4386, 5088, 5288, 5488, 6388, 6588, 6788, 7288, 7388, 7488, Hydro 100, Hydro 186, Combines, Industrials (All w/ D414, DT414, D436, D466 series engines), Replaces: Casting 688922C1, 688923C91 (1.625” wrist pin)
STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com 259 Connecting rod bolt lock tabs - USA made Engine gasket sets cont... NOTE: 8 used per engine; Sold individually. Part # USD Description / Application Part # USD Application IHS1328 $92.50 Engine Gasket Set fits: Super A SN IHS2452 $6.50 255418 & up, Super C, 100, 130, 140, 200, Fits: H, I, O, W4, Supers, 300, 350 gas, LP 230, 240, 330, (340 gas up to engine SN Replaces: 47499DB (0.420” bolt hole dia.) 100500), T4 (All w/ 3-1/8” to 3-1/2” bore models equipped w/ a water pump) IHS2462 $4.95 Fits: M, Supers, MTA, I, O, W6, Supers, Replaces: 356314R92, 356314R96, 400, 450 gas, LP, Replaces: 47496DB 362880R91, 367705R92, 381734R92 (0.490” bolt hole dia.) USA made NOTE: Governor seal NOT included. 80% USA content. IHS2472 $4.95 Fits: MD, Supers, WD6, W9, 400 diesel, IHS3083 $69.99 450 diesel, 600 gas, 650 gas Full Engine Gasket Set w/ Crankshaft Replaces: 47507DA, 253216R1, 253220R1 Seals fits: B250, B275, B276, B414, 238, (0.549” bolt hole dia.) 274, 354, 364, 374, 384, 424, 434, 444, 2300A, 3414, 3444, (TD5, 500 Crawler) w/ BD144, BD154 diesel engines SN: 26077 & up, Replaces: 3041249R93 Engine assy. & break-in lube IHS1330 $159.99 Contains a special additive to cover the Engine Gasket Set fits: H, HV, I4, O4, wear surfaces that help prevent scoring OS4, W4, Replaces:Inc.® 55620D, 55620DC, & galling during initial engine start up. 53888D, 354475R95, 381729R93 Also contains corrosion inhibitors to help NOTE: Governor seal not included. prevent rust & pitting of surfaces & zinc for older engine valve train protection. IHS1332 $169.99 Engine Gasket Set fits: M, Supers, MTA, I, Use on bearings, camshafts, lifters, oil O, W6 series, 400, 450 gas, LP Case IH pumps, etc. (4 oz. bottle) USA made Replaces: 55621D, 55621DA, 55621DC, IH/Farmall Description Part # USD 355013R91, 369958R91 Melling Engine Assembly & Break-In Lube..ABC3346...... $6.99 Parts,NOTE: Governor seal not included. NOTE: Not for use on cylinder wall or piston rings.
Lower end engine gasket sets Engine gasket sets Part # USD Description / Application NOTE: Includes all gaskets & crankshaft seals (except governor IHS1858 $319.95 seal) for major overhaul. Lower End Engine Gasket Set w/ Seal fits the following diesels w/ D248, Part # USD Description / Application Engine parts D264 D281: MD, MDV, Supers; Super IHS1324 $89.99 Engine Gasket Set fits: Cub, Cub LoBoy, MTA diesel, ODS6, TD6, TD6-61, ID6, 154, 184, 185 (All w/ C-60 engine) WD6, Super; W6TA, (400, W400 both to Replaces: 352539R91, 352540R91,Tractor ESN:13481), (450, W450 but rear seal is 355733R96 NOTE: Governor seal NOT different), Replaces: 332653R92 included. Rear seal must be used w/ late USA made NOTE: To make a complete 251363R2 retainer, will not fit tight in gasket set order IHS1858 & IHS1855 early 251363R1 retainer. For engines w/ valve grind set. early R1 retainer you must either switch IHS3939 $89.99 to late R2 retainer or use locktite 660 or Lower End Gasket Set fits the following similar to retain seal. w/ British BD264 4-cyl. diesel engine: IHS1318 $139.99 BMD, Super BMD, B450, BTD6 Crawler NOTE: See website for replacement SteinerEngine Gasket Set fits: F12, F14, I12, O12, numbers. O14, W12, W14 USA made IHS3994 $79.95 Conversion Gasket Set fits: T340, 404, 424, 444, 500, 504, 2404, 2424, 2444, 2504, 3514 IHS1326 $64.50 (All w/ C135 engine SN: 100501 & up, Engine Gasket Set fits: A, B, C, Super A C146, C153 gas, LP), Replaces: 381738R91, up to SN: 255417 (All w/ engines 3” to R92 NOTE: Order w/ IHS1665 to make 3-3/8” bore & w/out water pump) a full engine gasket kit. See website for NOTE: Governor seal NOT included. all applications.
260 STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm Lower end engine gasket sets cont... Valve grind gasket sets cont... Part # USD Description / Application Part # USD Application IHS3780 $99.99 Crankcase Gasket Set fits: 454, 464, 544, IHS811 $99.95 Fits the following gas, LP w/ C-152, 574, 674; Industrials: 2400A, 2400B, C-164, C-169, C-175: H, Supers, I, O, 2405B, 2410B, 2412B, 2500, 2500A, 2500B, W4 series, 300, 350 2505B, 2510B, 2514B, 2544, 3400A, 3500A, Replaces: 354475R94 NOTE: Includes (3514 w/ C-175) (All w/ C157, (C175 a premium metal jacketed head 1973 & up), C200 gas, LP engines) gasket. Replaces: 398178R93 IHS3356 $69.99 Economy Valve Grind Gasket Set fits: Same as IHS811 Valve grind gasket sets Replaces: 354475R94 USA made NOTE: Includes all gaskets required when replacing the NOTE: Includes a graphite coated cylinder head unless otherwised noted. head gasket. Part # USD Application IHS888 $179.99 IHS3764 $84.50 Fits: 454, 464, 544, 574, 674; Industrials: 2400A, 2400B, 2405B, 2410B, 2412B, Fits: F20, T20, Regular 2500, 2500A, 2500B, 2505B, 2510B, USA made 2514B, 2544, 3400A, 3500A, (3514 w/ C-175) (AllInc.® w/ C157, (C175 1973 & IHS005VGK $41.99 up), C200 gas, LP engines) IH/Farmall Replaces: 398177R96 IH/Farmall
Fits: Cub, Cub Loboy, 154; Also fits Case IH IHS807 $84.99 184, 185 except for the carburetor Fits the following gas, LP w/ C-248, mounting gasket, Replaces: 352540R91 C-264, C-281: M, Supers, 400, 450, I, O, T, W6 series, Replaces: 354476R95 USA made NOTE: This includes the IHS658 $38.95 Fits: A, B, C, Super A up to SN: 255417 premium metal jacketed head gasket. (All w/ engines 3” to 3-3/8” bore Parts, Engine parts & w/out water pump), Replaces: IHS1855 $229.99 Fits the following diesels w/ D264, 354474R95 USA made NOTE: Does D281: MD, MDV when both are not include valve stem seals. updated to D264, Super MD, Super IHS840 $72.99 Fits: Super A SN 255418 & up, Super MDV, Super MTA diesel, ODS6, C, 100, 130, 140, 200, 230, 240, 330, TD6, TD6-61, ID6, WD6, Super WD6, (340 gas up to engine SN 100500), T4 W6TA, 400, 450, W400, W450 (All w/ 3-1/8” to 3-1/2” bore models Replaces: 53436DE, 261339R92 equipped w/ a water pump), Replaces: (4-7/16” bore) USA made 357476R95 USA made NOTE: Does NOTE: This is for engines w/ sleeves not include valve stem seals. that protrude above the block. IHS1665 $44.99 TractorIHS2383 $109.99 Fits: T340, 404, 424, 444, 500, 504, 2404, 2424, 2444, 2504, 3514; (C135 engine Fits: I9, T9, W9, Super W9, WR9S, SN: 100501 & up) (All w/ C146, 600, 650, (UC335 & UC350 Power C153 gas, LP) USA made NOTE: For Units) gas, LP, Replaces: 354477R91, engines using 14 head bolts/studs. 354477R92 USA made
IHS3085 $47.95 Fits: B250, B275, B276, B414, 238, 274, 354, 364, 374, 384, 424, 434, 444, 2300A, IHS1669 $104.50 Fits the following gas, LP w/ C-221, 3414, 3444, (TD5, 500 Crawler) (All w/ C-263, C-282, C-291, C-301: 460, 560, BD144, BD154 diesel engines) 606, 656, 660, 666, 686, 706, 756, 766, Replaces: 706105R93 Steiner 806, 826, 856; Hydros: 70, 86 IHS4641 $49.99 NEW! Fits the following w/ D206, Replaces: 173141R93, D239, DT239, D246, D268, DT268 372770R95,R96,R97 USA made diesel engines: 474, 574, 584, 585, 595, 624, 644, 654, 674, 684, 685, 695, IHS1692 $129.99 724, 733, 740, 740, 743, 744, 745, 784, Fits the following diesels w/ D-236, 785, 795, 824, 833, 844, 844S, 845, 884, D-282, D-301: 460, 560, 606, 656, 660, 885, 895, 940, 995, 3230, 4210, 4220, (706 w/ D-282), Replaces: 134403A1, 4230, 4240, Replaces: 1967014C1, 310446R95 3136799R99, 3136800R98
STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com 261 Valve cover gaskets Valve cover gaskets cont... Part # USD Application Part # USD Application IHS2597 $12.95 IHS4536 $5.99 Fits: F12, F14, I12, O12, O14, W12, W14 NEW! Fits: B275, B414, 354, 364, 384, Replaces: 24552D, 54490D USA made (424, 444 both w/ BD154 engine) Replaces: 3069767R2
IHS2605 $13.50 IHS4530 $5.50 Fits: F20, T20, Regular, Replaces: 29760D, NEW! Fits: 544, 574, 584, 624, 664, 674, 60410D USA made 684, 784, 785, 884, Hydro 84; Industrials: 2500A, 2500B; Case IH 585, 595, 685, 695, 885, 895, 995, 3230, 4210, 4230, 4240 IHS869 $12.10 Replaces: 3138642R3 Fits: A, B, C, Supers, 100, 130, 140, 200, 230, 240, 330, 340, 404, 424, 444, 504; (Crawlers: T4, T5, T340, 500) Replaces: 43378DE Make your own gasket with our gasket material. Made in the USA! IHS865 $15.49 Fits: H, Supers, 300, 350 gas, I, O, W4 Gasket material - USA made series, Replaces: 43976DC USA made NOTE: For making general purpose gaskets. Do not use for high temperature applications. Inc.® Part # USD Description / Application MFS2621 $19.89 ABC1830 $13.99 Fits: 350 diesel Cork / Rubber Rollpack Gasket Material Replaces: 367469R1 USA made (1/16” thick x 12” wide x 24” long) Case IH
IH/Farmall ABC1835 $16.25 IHS871 $19.99 Cork / Rubber Rollpack Gasket Material Fits: M, Supers, MTA, I, O, T, W6 series, (3/32” thick x 12” wide x 24” long) 400, 450 gas, LP Parts, Replaces: 45952DC ABC1844 $15.99 Gasket Paper IHS3773 $11.95 (0.0160” thick x 18” wide x 98” long) Fits: 454, 464, 544, 574, 674; Industrials: 2400A, 2400B, 2405B, 2410B, 2412B, 2500, ABC1846 $22.99 2500A, 2500B, 2505B, 2510B, 2514B, 2544, Gasket Paper 3400A, 3500A, (3514 w/ C-175) (All w/ (0.0275” thick x 20” wide x 108” long)
Engine parts C157, (C175 1973 & up), C200 gas, LP engines, Replaces: 398068R4 USA made
IHS2609 $25.99 Fits: I9, T9, W9, Super W9,Tractor WR9, WR9S, 600, 650, UC335, UC350 Power Units gas, Pushrods, parts LP, Replaces: 52793DA USA made NOTE: Sold individually. See website for full applications. IHS1687 $15.79 Fits the following gas, LP w/ C-221, Part # USD Description / Application C-263, C-282, C-291, C-301: 460, 560, 606, IHS2401 $25.99 Pushrod fits: A, B, C, Supers, 100, 130, 656, 660, 666, 686, 706, 756, 766, 806, 826, 140, 200, 230, 240, 330, 340, 404, 424, 444, 856; Hydros: 70, 86, Replaces: 164421R1, 504 (All w/ C113, C123, C135, C146, 369983R2 USA made C153 gas, LP engines), Replaces: 47385D, IHS1680 Steiner$17.95 Fits the following diesels w/ D-236, 47386D, 357548R1, 360213R91 D-282, D-301: 460, 560, 606, 656, 660, (10.762” o/a length, 0.250” tube dia.) (706 w/ D-282), Replaces: 278308R3 USA made USA made NOTE: Includes copper stud IHS3790 $7.99 Pushrod fits: B250, B275, B276, B414, grommets. 238, 274, 354, 364, 374, 384, 424, 434, 444; IHS2004 $15.89 Industrials: 2300A, 2424, 2444, 3414, 3444, Fits: 966 - 4366, 986 - 4386, 3388 - 7488; TD5, TD5B, 500 (All w/ BD144, BD154 Combines & Industrials using D414, diesel engines), Replaces: 3127452R1, DT414, D436, DT436, DT466 engines 704783R2, 847360R1 Replaces: 1342828C1 USA made (.315” O.D., 10.688” long)
262 STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm Pushrods, parts cont... Cylinder heads, parts cont... Part # USD Description / Application Part # USD Description / Application IHS2414 $10.95 Pushrod fits: 460, 560, 606, 656, 660, 706 IHS2721 $12.95 all gas, LP, diesel (no German diesel); Cylinder Head Stud fits: H, I4, O4, W4, 454, 464, 544, 574, 666, 674, 756, 806, 826, Supers, 300, 350 gas, LP 856 all gas, LP; 340 diesel, 504 diesel Replaces: 45009D (7/16” dia. x 5-15/16” only; Also fits Combines, Industrials long; 4340 heat treated steel, grade 5) Replaces: 164436R91 (12.684” o/a length, USA made NOTE: 11 used per engine; 0.375” tube dia.) USA made Sold individually. IHS2391 $9.59 Valve Tappet Side Cover Gasket fits: Cub, Cub Loboy, 154, 184, 185 IHS2717 $13.69 Replaces: 251371R1 USA made Cylinder Head Stud fits: H, I4, O4, W4, IHS1704 $13.79 Supers, 300, 350 gas, LP Pushrod Side Cover Gasket fits: H, HV, Replaces: 48939DA (7/16” dia. x 6-1/8” Supers, O4, OS4, W4, Super W4, 300, 350 long; 4340 heat treated steel, grade 5) gas, LP, Replaces: 45018DB USA made NOTE: 5 used per engine; (18-1/16” length, 4” width) USA made Sold individually. IHS3777 $15.99 Pushrod Side Cover Gasket fits: 454, 464, Inc.® 544, 574, 674; Industrials: 2400A, 2400B, IH/Farmall 2405B, 2410B, 2412B, 2500, 2500A, 2500B, IHS2723 $13.95 IH/Farmall 2505B, 2510B, 2514B, 2544, 3400A, 3500A, Cylinder Head Stud fits: M, I6, O6, W6, Case IH (3514 w/ C-175) (All w/ C157, (C175 Supers, MTA, T6, 400, 450 gas, LP (4 used 1973 & up), C200 gas, LP engines per engine); Also used for D206 engine Replaces: 398040R3 USA made applications (11 used per engine) IHS2685 $15.99 Replaces: 49023DA (1/2” dia. x 7-1/16” long; 4340 heat treated steel, grade 8) Pushrod Side Cover Gasket fits: M, Engine parts Parts,USA made NOTE: Sold individually. Supers, I, O, T, W6 series, 400, 450 gas, LP See website for all applications. Replaces: 49029DA, DB USA made
IHS2727 $13.99 IHS1684 $15.99 Pushrod Side Cover Gasket fits the following gas (unless noted) w/ C-221, Cylinder Head Stud fits: M, I6, O6, W6, C-263, C-282, C-291, C-301, D-236, D-282, Supers, MTA, T6, 400, 450 gas, LP D-301: 460, 560, 606, 656, 660, 666, 686, Replaces: 46117D (1/2” dia. x 6-7/8” long; (706 gas, diesel, D-282); Fits the following 4340 heat treated steel, grade 8) gas, LP: 756, 766, 806, 826, 856; Hydros: USA made NOTE: 12 used per engine; 70, 86, Replaces: 369982R1, 69735R1 Sold individually. USA made Tractor
IHS2725 $2.99 Cylinder Head Stud Nut fits: A, B, C, Cylinder heads, parts Supers, F12, F14, 100 - 240 (9 used); F20, Part # USD Description / Application Regular, T20 (15 used); M, Supers, MTA, I, O, T, W6, Supers, 400, 450 gas, LP (16 IHS005 $188.50 used); F30, W30, 10-20 (17 used) Cylinder Head fits: Cub, 154; 184, 185 w/ Replaces: 4097DA, 25527R1, 329-118 Casting 355691R2 (1/2” - 20 NF, grade 8) USA made SteinerReplaces: 251228R1, 351779R91 NOTE: Sold individually. IHS2719 $1.99 IHS2225 $979.95 IH 450 LP High Compression Cylinder Head w/ Guides & Seats fits: M, Supers, Cylinder Head Stud Nut fits: H, I4, O4, MTA, I, O, T, W6 series, 400, 450 gas, LP W4, Supers, 300, 350 gas, LP Replaces: 364586R1, 364586R11 Replaces: 1763Y (7/16” - 20 NF, grade 8) NOTE: Must use w/ IHS2227 valve train USA made NOTE: 16 used per engine; kit. Customer is responsible for ALL Sold individually. final machining. Will bolt directly onto a gas engine for increased horsepower.
STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com 263 Valve train kits Valve train kits cont... NOTE: For valve train kits not listed please call. Measure valves Part # USD Description / Application before ordering as different lengths were used. IHS3318 $119.95 Valve Train Kit (For engines w/ exhaust Part # USD Description / Application rotators) fits: Some H, HV, (I4 SN: 4113 & IHS2131 $139.99 up), O4, OS4, Super H, Super W4, W4 (All using gas cylinder head 8043D, 8043DB, Valve Train Kit (For engines w/out 8043DC), Replaces: (4) 50706DA (intake exhaust valve rotators) fits: Cub, Cub valves), (4) 50707DA (exhaust valves), (8) LoBoy, 154, 184, 185 24544DA (springs), (8) 8049DR (guides), Replaces: (4) 251260R1 (intake valves), (8) (8) 386192R1 (seals), (8) 42026D (keepers, 251262R2 (valve springs), (4) 251261R2 locks) (Intake valve length: 5.360”; (exhaust valves), (8) 352973R3 (valve Exhaust valve length: 5.360”; Valve spring guides), (16) 46209D (valve keepers) length: 2.70”) NOTE: Includes stem seals. NOTE: Does not include retainers. Does not include retainers. IHS3321 $131.50 Valve Train Kit (For engines w/ valve rotators) fits: Some M, O6, OS6, Super M, IHS3306 $169.99 Valve Train Kit (For engines w/out Super MTA, Super W6, W6, W6TA gas exhaust rotators) fits: Some A, B, BN, (All w/ cylinder head casting 8060, 8574 (Super A up to SN: 255417); Fits cylinder (D, DB, DC, DD), Replaces: (4) 50731DA head 6716D, 9052D, Replaces: (4) 42024D (intake valves), (4)Inc.® 50732DA (exhaust intake valves, (4) 42025D exhaust valves, valves), (8) 3566951 (springs), (8) 8044DR (8) 24544DA springs, (8) 356583R21 (guides), (8) 279299R1 (seals), (8) 41339D guides, (8) 386192R1 seals, (8) 42026D (keepers, locks) (Intake valve length: keepers (locks) (Intake valve length: 4.83” 5.85”, Exhaust valve length: 5.85”, Valve long, head dia.: 1.34”; Exhaust valve spring length: 2.675”) NOTE: Includes
Case IH length: 4.83”, head dia.: 1.22”; Valve stem seals. Does not include retainers. IH/Farmall spring length: 2.70”) NOTE: Includes IHS2227 $319.95 stem seals. Does not include retainers. ‘LP’ High Compression Valve Train Kit Parts,fits: M, Supers, MTA, I, O, T, W6 series, IHS3311 $134.25 Valve Train Kit (For engines w/out 400, 450 (All w/ LP cylinder head) exhaust rotators) fits: Some Super A, Replaces: 364589R1, 364590R1, 356951R1, Super AV both SN: 255418 - 310299, C, 41339D, 41349D, 47277D, 61479HA Super C, 100, 200 (All w/ cylinder head NOTE: Includes intake & exhaust casting 251172R1, 251172R2, 355046R1, valves, springs, retainers, valve locks, 355046R2), Replaces: (4) 57797D (intake stem retainer clips. Does not include valves), (4) 57798D (exhaust valves), roto caps or guides. This kit is needed
Engine parts (8) 24544DA (springs), (8) 356583R21 when switching from a gas cylinder (guides), (8) 386192R1 (seals), (8) 42026D head. Customer must grind valves to (keepers/locks) (Intake valve length: match seats & size the guides to the 4.94” long, head dia.: 1.34”;Tractor Exhaust valves. valve length: 4.94”, head dia.: 1.16”; Valve IHS3324 $199.99 Valve Train Kit fits: 400, 450, W400, W450 spring length: 2.70”) NOTE: Includes gas (All w/ cylinder head casting 362174, stem seals. Does not include retainers. 362433, 362920 (R1, R2) IHS3315 $159.99 (Intake & Exhaust valve length: 6.06”; Valve Train Kit (For engines w/ exhaust Valve spring length: 2.675”) rotators) fits: Some 130, 140, 230, 240, NOTE: Includes stem seals. Does not 330, 340, 404, 424, 444, 504 gas (All w/ include retainers. cylinder head casting 366299R1, R2, IHS3347 $229.95 Valve Train Kit fits: 460, 560, 606, 656, 393508R1), Replaces: (4) 366302R2 (intake 660, 666, 686, 706, 756, 766, 806, 826, 856, valves), (4) 366303R4 (exhaust valves), (4) Steiner Hydro 70, Hydro 86 & Industrial using 406723R1 (intake springs), (4) 368450R1 C221, C263, C282, C291, C301 gas, LP (exhaust springs), (8) 356583R21 (guides), engines (Intake valve length: 5.072”, head (8) 386192R1 (seals), (8) 42026D (keepers dia.: 1.781”, Exhaust valve length: 5.053”, (locks) (Intake valve length: 5.28” long, head dia.: 1.516”, Spring length: 2.438”) head dia.: 1.500”; Exhaust valve length: NOTE: Includes stem seals. Does not 5.28”, head dia.: 1.312”; Intake spring include retainers. Early C221 & C263 length: 2.400”; Exhaust spring length: engines must also use larger 1.781” 2.330”) NOTE: Includes stem seals. intake valve seats. See website for all Does not include retainers. applications.
264 STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm Camshaft, parts Camshaft, parts cont... Part # USD Description / Application Part # USD Description / Application IHS182 $279.99 IHS3566 $7.49 Valve Lifter, Tappet fits: 460, 606, 2606, 560, 656, 660, (706 gas, LP & D282 diesel), Camshaft (LH Thread) fits: M, MTA, 666, 686, Hydro 70, Hydro 86, 766, 886, Supers, I, O, T, W6 series gas 4100, 4156 gas, LP, diesel - unless noted; Replaces: 45955D, 48196DBX 454, 464, 544, 574, 674, 756, 806, 826, 856, 2400A, 2400B, 2500, 2500A, 2500B gas, LP only; 340, 504, 2504 (All diesel); 966, 1066, (early 1086) (All w/ D414, DT414 diesel IHS695 $95.00 Camshaft Gear fits the following gas w/ up to engine SN: 155805 using 0.999” dia. C-113, C-123, C-135, C-146, C-153: A, B, tappet); Early 986, Early 3688, Hydro 100, C, Supers, 100, 130, 140, 200, 230, 240, Early Hydro 186, 1466, Early 1486, 1566, 330, 340, 404, 424, 444, 504, 2404, 2424, (Early 1586, 3388, 3588), 4166, (Early 2444, 2504, 3514, T340, T5, 500 Crawlers 4186, 5088, 6388) (All w/ D436, DT436 Replaces: 6779DB, 375712R1 diesel up to engine SN: 121623 using NOTE: 66 teeth. 0.999” dia. tappet); (Early 3488, 3588, 3788), 4366, (Early 4386, 5288, 6588, 6788) IHS1555 $105.95 (All w/ D466, DT466 diesel up to engine SN: 140086 using 0.999” dia. tappet) Camshaft Gear fits: H, HV, I, O, W4 Inc.® Replaces: 75524R3, 684729C1, 911776R3 series, Supers, 300, 350 gas, LP
(0.999” O.D., 2.445” o/a length) IH/Farmall Replaces: 6664DB, 6664DA, 6664D IH/Farmall Case IH USA made NOTE: 48 teeth. IHS3553 $7.99 Valve Lifter, Tappet fits: (Late 966, 1066, 1466, 1566, Hydro 100, 986 - 4386), 3388 IHS1560 $134.95 - 7488, Hydro 186 (All using 1.120” O.D. lifter), Replaces: 1802340C1 Camshaft Gear fits: M, MV, Supers, MTA, (1.120” O.D., 2.439” o/a length) Engine parts I, O, W, T6, 400, 450 gas, LP Parts,NOTE: See website for engine serial Replaces: 6760DB, 6760D number breaks, Combine & Industrial USA made NOTE: 58 teeth. applications.
IHS2739 $39.99 IHS2048 $137.95 Camshaft Gear fits: 340 diesel, 504 diesel, (454, 464, 544, 574, 666, 674, 686, 756, 3-pc. Camshaft Bearing / Bushing Set 766, 806, 826, 856, Hydro 70, Hydro 86 fits: H, I4, O4, W4, Supers, 300, 350 gas, LP), (460, 560, 606, 656, 660 gas, LP, gas, LP, Replaces: 53419DB, 53420DA, diesel), 706 gas, LP, D282 diesel 53421DA USA made Replaces: 367240R1,Tractor 312500R1 USA made NOTE: 54 teeth.
IHS4294 $14.95 IHS2741 $39.99 NEW! Valve Lifter (Tappet) fits: A, B, C, Supers, 100, 130, 140, 200, 230, 240, 3-pc. Camshaft Bearing / Bushing Set 330, 340, 404, 424, 444, 504 (All w/ C113, fits: M, MV, Supers, I6, O6, W6, T6, 400, C123, C135, C146, C153 gas, LP engines) 450 gas, LP, Replaces: 53422DA, 53423DB, Replaces: 47384D, 356979R1 53424DA USA made Steiner(2.325” o/a length, 1.00” face O.D.) IHS2745 $36.99 IHS3561 $21.50 4-pc. Camshaft Bearing / Bushing Set Valve Lifter, Tappet fits: I6, ID6, (I9 gas, fits: 340 diesel, 504 diesel, (460, 560, 606, LP), M, MD, Supers, MTA, O6, OD6, OS6, 656, 660, 706 gas, LP, diesel, no German ODS6, T6-61, TD6-61, (T9 gas), W6, WD6, diesels), 666, 686, 756, 766, 806, 826, 856, Supers, (W9 gas, LP, Supers), W400, Hydro 70, Hydro 86 gas, LP W450, 400, 450, (600, 650 gas, LP) Replaces: 70259R2, 70260R2, 70261R2, Replaces: 45956D, 684414C1 70262R1, 130476R93 USA made (1.243” O.D., 2.655” o/a length) NOTE: See website for full applications.
STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com 265 Oil fill breather caps Oil pan parts cont...
Part # USD Description / Application Part # USD Description / Application IHS406 $39.95 ABC540 $3.39 Oil Fill / Breather Cap w/ Clip & Copper Washer / Gasket (For ABC539) Filter Element fits: A, B, C, Supers, 200, Replaces: 3405HA (.875” I.D.) 230, B275; B414, 354, 2300, 3414 gas, diesel USA made NOTE: Copper. Replaces: 49049DX, 364901R91, 364899R91 (3-1/4” tall) USA made NOTE: Exact of IHS925 $11.29 Oil Filter Drain Cap fits: Cub, Cub LoBoy; original. E-coated black. “Oil” stamped Serviceable for Cub LoBoy 154, 184, 185 into top. Fits over 1-1/2” pipe. (3/8” pipe thread) USA made JDS500 $39.99 Oil Fill / Breather Cap w/ Clip & Copper NOTE: Has stamped “IH”. Cast iron. Filter Element fits: Same as IHS406 IHS503 $15.89 Oil Level Indicator (Petcock) fits the (1-1/2” tall) USA made following w/ petcocks mounted oil pan: NOTE: Restoration quality. E-coated F12, F14, F20, F30, I12, I14, O12, O14, W12, black. “Oil” stamped into top. Fits over W14, W30, Regular, 10-20, 15-30, 22-36, A, 1-1/2” pipe. B, C, Supers, H, M, Early Supers, I, O, W4, ABC042 $12.99 6 series, Replaces: 1998TA Oil Fill / Breather Cap w/ Clip & Filter (3/8” pipe thread) NOTE: 2 used per Element fits: A, B, C, Supers, 200, 230, tractor; Sold individually. B275, B414, 354, 2300, 3414 gas, diesel (1-1/2” tall) NOTE: Economy style. JDS3379 $39.95 Engine Dipstick ConversionInc.® fits: Same as IHS503 (4.910” o/a length, 3/8” NPT) IHS338 $9.95 Oil Filler Cap w/ Gasket fits: 140, 240, 330, NOTE: See website for all applications. 340, 464 & Industrials This is an aftermarket part originally Replaces: 367857R91 (1-3/4” I.D., manufactured in Iowa in the late 1940s. 1-3/8” tang to tang) NOTE: Must block Remove oil petcock & replace w/ this Underside view vented hole w/ JB Weld etc. conversion. Case IH
IH/Farmall IHS736 $10.95 Oil Fill Cap fits: F12 SN: 56316 & up w/ IHS818 $10.65 IH motor, F14, H, M, Supers, I, O, T, W4, Oil Pan Gasket fits: Cub, Cub LoBoy, 154, 6, 9 series gas, diesel, Farmall 300, 350 Parts,184, 185, Replaces: 251369R1 Row-Crops, 400, 450 (No Internationals & Utilities), Replaces: 4819D IHS1953 $8.95 Engine Block Inspection Cover Gasket CKS117 $14.99 Oil Fill Cap w/ Gasket (Vented) fits: F20 - W30, 10-20 - 22-36 fits: IH 300, 350 Utilities gas, diesel Replaces: 7102-1/8T, 7102T Replaces: 362198R91 (2.25” I.D., 2.37” O.D., (6-1/2” O.D., 5-1/4” I.D., 0.575” wide, 1.80” outer tang to tang) NOTE: Must 0.064” thick) USA made NOTE: 2 used
Engine parts per engine; Sold individually. Underside view block vented hole w/ JB Weld etc. IHS809 $13.95 Oil Pan Gasket fits the following gas w/ ABC292 $1.49 Gasket only fits: F12, F14, H, M, Supers, C-113, C-123, C-135, C-146, C-153: A, B, C, I, O, T, W4, 6, 9 series gas,Tractor diesel, Farmall Supers, 100, 130, 140, 200, 230, 240, 330, 300, 350 Row-Crops, 400, 450 340, 404, 424, 444, 504, 2404, 2424, 2444, (No Internationals & Utilities) USA made 2504, Replaces: 43458DB IHS3080 $6.85 Oil Pan Gasket fits: B250, B275, B276, B414, 238, 274, 354, 364, 374, 384, 424, 434, 444, 2300A, 3414, 3444, TD5, 500 Crawler (All Oil pan parts w/ BC144 gas, BD144 diesel or BD154 Part # USD Description / Application diesel engines), Replaces: 703840R2 ABC539 $7.95 IHS813 $18.89 Oil Pan Drain Plug fits the following gas, Oil Pan Gasket fits the following gas w/ LP, diesel: Cub SN: 123700 & up, Late C-152, C-164, C-169, C-175: H, Supers, I, O, SteinerH, M, Super A, Super C, Super H, Super W4 series, 300, 350 M, MTA (All using 7/8” plug); 100 - 660, Replaces: 45267DA B250, B275, B414, 3414, 3444, 706 - 4386 except German diesel, 3488 - 3688; Fits the IHS3768 $21.50 Oil Pan Gasket fits: 454, 464, 574, 674; following gas: 454, 464, 544, 574, 674, 826, Industrials: 2400A, 2400B, 2405B, 2410B, 2400, 2500, Replaces: 359885R1, 688067C1 2412B, 2500, 2500A, 2500B, 2505B, 2510B, (7/8” - 18 UNF) USA made 2514B ALL w/ C157, (C175 1973 & up) & NOTE: White zinc finish. Early H, M C200 gas, LP engines (All w/ cast iron oil used 3/4” square pipe plug. Verify size pan), Replaces: 405858R1, 405858R2 before ordering. USA made
266 STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm Oil pan parts cont... Oil filter elements w/ gasket - USA made Part # USD Description / Application cont... IHS803 $16.69 Part # USD Description / Application Oil Pan Gasket fits the following gas, LP Cartridge type cont... w/ C-248, C-264, C-281: M, I, O, T, W6 ABC095 $11.59 series, Supers, 400, 450 Fits the following gas w/ C-113, C-123, Replaces: 46109DA C-135, C-146, C-152, C-153, C-164, C-169, C-175: A, AV & Supers, (B, BN SN: 97398 & IHS3931 $25.50 up), C, Super C, (H, HV SN: 121022 & up), Oil Pan Gasket fits the following diesels: Super H, Super, HV, (O4, I4, T4, T5 & W4 400, 450, ID6, MD, Super MD, MTA, ODS6, SN: 4958 & up), Super W4, 100, 130, 140, TD6, WD6, Super WD6, WD6TA 200, 230, 240, 300, 330, 340, 350, 404, 424, Replaces: 52001D USA made 444, 504, 2404, 2424, 2444, 2504, 3444 Replaces: 63855D, 355009R91, 360430R91, IHS1673 $9.95 Oil Pan Gasket fits the following gas, LP, 376374R91 (5-19/32” length, 3-9/32” O.D.) diesel w/ C-221, C-263, C-282, C-291, ABC096 $19.59 Fits the following gas w/ C-248, C-335, C-301, D-236, D-282, D-301: 460, 560, 606, C-350: 15-30, 22-36, (M, MV both up to 656, 660; Fits the following gas: 666, 686, SN: 59393), (T6, I6, W6 All up to SN: (706 gas or D-282 diesel); Fits the following 4252), W9, 600, 650; Following w/ diesel gas, LP: 756, 766, 806, 826, 856; Hydros: D-248, D-264, D-281, D-335, D-350: MD, 70, 86, Replaces: 160476H1, 318058R91, Super MD, ODS6,Inc.® WD6, Super WD6, 369984R1 USA made WD9, 400, 450, 600, 650 IH/Farmall IHS4527 $11.99 Replaces: 63884D, 63885D, 257867R92, IH/Farmall NEW! Oil Pan Gasket fits: 544, 574, 584, Case IH 360432R91, 376376R91 (7-1/4” length, 585, 624, 654, 664, 674, 684, 685, 784, 7858, 3-15/16” O.D.) 884, 885, 2500; Industrials: 2500A, 2500B; Case IH 595, 685, 695, 895, 995, 3230, 4210, ABC097 $9.99 Fits the following gas w/ C-221, C-263, 4230, 4240, Replaces: 3055161R4 C-291, C-301: 460, 560, 606, 656, 660, 706, 756, 806, 826, 856, 2606, 2656, 2706, 2756, IHS1999 $21.50 Parts,2806, 2826, 2856; Fits the following diesel Engine parts Oil Pan Gasket fits: 966 - 4366, 986 - 4386, w/ D-166, D-188, D-236, D-282, DT-361, 3388 - 7488; Combines & Industrials using DT-407: 340, 460, 504, 560, 656, 660, 706, D414, DT414, D436, DT436, DT466 engines 806, 856, 1026, 1206,1256, 1456, 2504, Replaces: 671827C1 - C4 USA made 2606, 2656, 2706, 2806, 2856, 21026, 21206, 21256, 21456; Combines: 815, 915 Replaces: 279994R91, 323827R91 (5-35/64” length, 3-31/32” O.D.) Oil filter elements w/ gasket - USA made Spin-on type Part # USD Description / Application IHS3926 $99.95 Spin-On Oil Filter Adapter Kit fits: A, B, H, Super H, M, Super M, MTA, O4, OS4, Cartridge type Tractor O6, W6, OS6, W4, Super W4, Super W6, ABC093 $10.50 Super W6TA, W400, W450, 300, 350, 400, 450, Replaces: 538829R91 (3.880” O.D. base) NOTE: Kit includes Fits the following gas w/ C-60: Cub, Cub ABC007 spin-on oil filter, new stud, LoBoy 154, 184, 185, Replaces: 376373R91 sealing washer, quad ring, filter adapter (4-5/8” length, 2-1/4” O.D.) base. See website for all applications. ABC007 $10.75 Spin-On Oil Filter only (5-13/32” high, 3-11/16” O.D.) ABC094 $14.99 Fits the following gas w/ C-113, C-152, IHS4177 $99.95 SteinerC-248, C-264, C-281: F12, F14, F20, F30, Spin-On Oil Filter Adapter Kit fits: Super T20, 10-20, Regular, W30, A, AV, (B, BN A, C, Super C, 100, 130, 140, 200, 230, 240, both up to SN: 97397), (H, HV both up 330, 340, 404, 424, 444, 504; Industrial: to SN: 121021), (M, MV both SN: 59394 T4 - T340A, 500, 500C, Replaces: 63856D, & up) Super M, Super MTA, O4, (I4, W4 538828R91 both up to SN: 4957), (T6, I6, W6 All w/ SN: 4253 & up), 400, W400, 450, W450 Replaces: 39515D, 63858D, 355010R91, ABC4178 $10.79 Spin-On Oil Filter only (3-7/8” length, 360431R91, 376375R91 3-11/16” O.D.) (7-11/32” length, 3-1/2” O.D.) Oil filters continue on next page
STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com 267 Oil filter elements w/ gasket - USA made Oil pump, parts
cont... Part # USD Description / Application Part # USD Description / Application IHS4289 $209.99 Oil Pump fits: 340 diesel, 504 diesel, (460, Spin-on type cont... 560, 606, 656, 660 gas, LP, diesel), (706 IHS4424 $59.95 gas, LP, D282 diesel), (666, 686, 756, 766, NEW! Spin-On Oil Filter Adapter Kit 806, 826, 856, Hydro 70, Hydro 86 gas, LP fits: 354, 364, 384, 424, 444, B275, B414; only), Replaces: 230421R91 USA made Industrials: 2424, 2444, 3414 NOTE: Fits engines using floating style sump. Must reuse old floating sump.
ABC3925 $14.99 Spin-On Oil Filter fits: 454, 464, 544, 574, IHS1291 $119.95 Oil Pump Drive Gear fits the following 674, Hydro 70, Hydro 86 gas, LP, 686, 786, w/ gas BC-144: 2300A, B250, B275, B414, 826; 460, 560, 606, 656, 660, 666, 706, 756, 354, 434, 444, 2444, 3414, 3444, 7000 766, 806, 856 gas, LP; Fits the following Forklift, Replaces: 3043830R1 diesels: 385, 395, 584, 585, 595, (706, 756 (1.726” o/a length) NOTE: 10 teeth. w/ German diesel), 784, 795, 884, 885, May have to redrill hole in shaft for 886, 895, 1468, 1568, 3088, 3210, 3230, drive pin. 3288, 4220, 4230, Replaces: 397868R1, IHS3431 $4.99 427207C2, 528250R1, 1329020C1, Oil Pump Body Cover Gasket fits: Cub, 3132737R93 (7-1/8” length, 3-11/16” Cub LoBoy, 154, 185,Inc.® 185 O.D.) USA made NOTE: Includes anti- Replaces: 251399R1 USA made drain back valve & 8 PSI bypass valve. Filter can replace shorter (5.370”) filter IHS3428 $8.95 Oil Pressure Regulating Valve Spring for more capacity, where filter length fits: Cub, Cub LoBoy, 154, 184, 185 is not an issue. Will replace 398080R2, Replaces: 251401R1 (3.000” free length,
Case IH 3055228R91, 3132183R91, 3136046R93, 0.470” O.D., 0.065” wire dia.)
IH/Farmall but new filter will be longer (7-1/8”). USA made NOTE: Located on right side IHS3934 $103.50 Spin-on Oil Filter Adapter Kit fits the of block below the magneto / distributor. following w/ C221, C263, C291, C301 IHS3434Parts, $8.80 Oil Pressure Regulating Valve Spring gas, LP engines: 460, 560, 606, 656, fits: A, B, C, Supers, 100, 130, 140, 200, 660, 706, 756, 806, 826, 856, Replaces: 230, 240, 330, 340, 404, 424, 444, 504 gas, 538837R91 (4.490” O.D.) USA made LP, Replaces: 43414DA (2.450” free length, NOTE: Kit includes ABC3925 spin-on 0.565” O.D., 0.080” wire dia.) USA made oil filter, new stud w/ adapter bushing, IHS3438 $4.99 Oil Pump Body Cover Gasket fits: A, B, sealing washer, quad ring, filter base. C, Supers, 100, 130, 140, 200, 230, 240, 330, IHS4210 $102.95
Engine parts 340, 404, 424, 444, 504 gas, LP, Replaces: Spin-On Oil Filter Adapter Kit fits: 460, 375786R2 USA made NOTE: Depending 560, 606, 656, 660 (All w/ D236, D282, on application, more than one may need D301 diesel engines), 706 w/ D282 diesel to be ordered for pump cover to gear USA made Tractor clearance (usually 0.003” to 0.005”). IHS3442 $10.69 Oil Pressure Regulating Valve Spring ABC4215 $19.99 Spin-On Oil Filter only (5-15/32” length, fits: H, M, MTA, Supers, I, O, W4, W6, 3-11/16” O.D., 1”-12 thread) USA made Supers, 300, 350, 400, 450 gas, LP IHS3295 $182.50 Spin-On Engine Oil Filter Adapter Kit Replaces: 45286D, 62672D fits: 806, 856, 1026, 1206, 1256, 1456 (3.765” free length, 0.735” O.D., 0.087” diesels, (Combines & Industrial using wire dia.) USA made USA made D361 - DT407 engines) IHS3446 $5.59 Oil Pump Body Cover Gasket fits: H, M, NOTE: Kit includes (2) aluminum MTA, Supers, I, O, W4, W6, Supers, 300, adapter bases, (2) mounting studs, (2) 350, 400, 450 gas, LP, Replaces: 45704D, Steinerinternal O-rings, (2) square cut external 45704DA USA made NOTE: Depending O-rings, (2) Case IH spin-on filters, on application, more than one gasket (1) instruction sheet. No drilling is may be needed for pump cover to gear required. clearance (usually 0.003” to 0.005”); ABC4616 $17.99 Sold individually. NEW! Oil Filter fits: Case IH 2094, 2294, ABC3465 $3.99 2394, 2594, 3294, 3394, 3594, 4494, 4694 Oil Pump Relief Valve Spring Replaces: A44081 (3.698" top O.D., 7.827" fits: 350 diesel, Replaces: 367482R1 height, 1"-12 thread size) USA made (2.030” o/a length, 0.445” O.D., 0.058” wire dia.) USA made
268 STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm Restoration quality muffler clamps cont... Flywheel ring gears Part # USD Description / Application ABC2625 $8.95 Clamp fits: A - 404, Replaces: 48889DA Part # USD Application (2”) NOTE: Painted steel. IHS1929 $49.95 Fits: Cub, 184, 55T Balers Replaces: 251270R2 ABC351 $10.99 (9.495” I.D., 10.678” O.D.) Muffler Clamp fits: H - 560 NOTE: 84 teeth. Replaces: 350602R1 ABC108 $29.95 Fits: A, B, C, Supers, 100, 130, 140, 200, (2-1/2”) NOTE: Chrome. Fits pipe O.D. 230, 240, Replaces: 55755DB of 2.350” - 2.550” range. (10.491” I.D., 11.438” O.D.) ABC2521 $16.95 NOTE: 90 teeth. Clamp fits: H - 560 ABC107 $39.95 Fits: H, Supers, I, O, W4 series, 300, 330, Replaces: 31790DA, 350602R1 340, 350 gas, Replaces: 45638DB (2-1/2”) NOTE: Stainless steel. (11.990” I.D., 13.200” O.D.) NOTE: 104 teeth. ABC2627 $9.99 Clamp fits: H - 560 IHS2865 $68.75 Fits: M, MD, MTA, Supers, I, O, W6 series, Replaces: 31790DA, 350602R1 Supers, 400, 450 gas, LP, diesel, 560 diesel, (2-1/2”) NOTE:Inc.® Painted steel. 660 diesel, Replaces: 266142R1 (14.485” I.D., 15.720” O.D., 0.800” wide) IH/Farmall FDS116 $12.99 Muffler Clamp Kit Serviceable for gas, LP IH/Farmall
NOTE: 125 teeth. Case IH w/ underslung exhaust: F240, I300, I350, 330, 340, 404, 424, 444, 504, 2444, 2504, T4 Crawler, Replaces: 362300R1 Restoration quality muffler clamps NOTE: Kit includes (2) cast iron clamps, nuts, bolts, lock washers. Part # USD Description / Application Engine parts ABC1867 $6.95 Parts, Clamp fits: Cub, Cub LoBoy Replaces: 351437R1 (1 bolt, 1-3/8” I.D.) Economy muffler clamps NOTE: Chrome plated. USA made IHS1227 $24.95 Part # USD Specifications Exhaust Manifold Clamp w/ Hardware (For Underslung Exhaust) fits: Cub, Cub ABC568 $2.99 (1-1/2” clamp) LoBoy, Replaces: 362361R1 ABC570 $2.99 (1-5/8” clamp) ABC572 $2.99 (1-3/4” clamp) ABC341 $9.95 ABC574 $3.99 (1-7/8” clamp) Clamp fits: IH/FarmallTractor models ABC576 $3.99 (2” clamp) (1-1/2”) NOTE: Chrome. ABC578 $3.99 (2-1/4” clamp) ABC580 $3.99 (2-1/2” clamp) ABC360 $9.95 Clamp fits: I300, I330, F340, I340, I350, I504 ABC583 $5.99 (2-3/4” clamp) gas, LP (All w/ underslung exhaust) ABC585 $5.99 (3” clamp) NOTE: Use w/ IHS041, Replaces: 362304R1 (muffler to tail pipe) IHS317, IHS1772 mufflers. (1-3/4”) NOTE: Zinc plated. Fits pipe ABC2234 $5.99 O.D. of 1.725” - 1.825” range. (3-1/2” clamp) ABC1771 $8.99 (4” clamp) NOTE: Use w/ IHS1769 ABC327 $9.95 muffler. Steiner2” Clamp fits: A - 404 Replaces: 48889DA (2”) NOTE: Chrome. Fits pipe O.D. of 1.850” - 2.000” range. Underslung muffler u-bolt Fits: Cub, Cub LoBoy w/ horizontal ABC2519 $14.95 exhaust, Replaces: 362363R1 USA made
Clamp fits: A - 404 Description Part # USD (2”) NOTE: Stainless steel Underslung Muffler U-Bolt...... IHS1231...... $11.99 NOTE: Installs around the mufflers for support.
STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com 269 Restoration quality mufflers Restoration quality mufflers cont... NOTE: Original look, original sound. Part # USD Application Part # USD Application IHS2535 $51.99 Fits: 140, 240, 330, 340, 404, 2404, IHS2660 $74.95 IHS2569 $111.50 3414 gas, (T340, T5, 500 Crawlers), Fits: 154, 184, 185, Replaces: 404914R1 91 Combine, 201 Windrower (All w/ NOTE: Imported. vertical exhaust); Serviceable for 424, 444, 3444 gas, diesel, (504, 3514 gas); IHS2660 dimensions: Inlet length: 2-1/8", Will also fit A - 230 if 1.78” dia. outlet Inlet dia.: 1-1/4" pipe thread, Shell length: pipe is desired, Replaces: 360720R91, 6", Shell diameter: 3.170", Outlet length: 5", Serviceable for 403825R1 Outlet O.D.: 1", Overall length: 14-1/8" IHS2535: High temperature paint. IH logo & part number is stamped into the IHS1706 $34.95 Fits: Farmall Cub w/ vertical exhaust SIDE OF THE MUFFLER. If raincap IHS1936 $98.50 Replaces: 351436R92 is needed order IHS2565; If clamp is IHS1706: High temperature paint. IH needed order ABC2625. logo & part number is stamped into the SIDE OF THE MUFFLER. If raincap IHS2569: Polished stainless steel. Can is needed order IHS2291 or RCS002; discolor from extreme heat. IH logo & If clamp is needed order ABC1867, part number is stamped into the SIDE ABC568 or ABC341. OF THE MUFFLER. If raincap is needed IHS2535 IHS2569 order IHS2294; IfInc.® clamp is needed order IHS1936: Polished stainless steel. Can ABC2519. discolor from extreme heat. IH logo & IHS2535, IHS2569 dimensions: Inlet length: part number is stamped into the SIDE 2-1/4", Inlet I.D.: 1-61/64", Shell length: OF THE MUFFLER. If raincap is needed 16-1/2", Shell dia.: 4-1/4", Outlet length 10", order IHS2291. Outlet O.D.: 1-25/32", Overall length: 28-3/4"
Case IH IHS1706, IHS1936 dimensions: Inlet I.D.: IHS500 $58.95
IH/Farmall IHS1706 IHS1936 Fits: H, I4, W4, Supers, F300, F350 1.343", Inlet O.D.: 1.450", Outlet O.D.: 1.385"; IHS1944 $129.99 IHS1944 Replaces: 51070D, 350600R95, Exhaust pipe: 1.375" O.D. x 9.5" length, 355869R1 Body: 21-3/8" o/a length, 3" shell O.D. x Parts,IHS500: High temperature paint; IH 10.375" shell length, Intake pipe: 1.343" I.D. x logo & part number is stamped into the 1-7/8" length SIDE OF THE MUFFLER. If raincap IHS1217 $42.95 Fits: Farmall Cub, IH LoBoy both w/ is needed order IHS2565; If clamp is underslung exhaust (horizontal muffler) needed order ABC2627. Replaces: 363116R91 IHS1944: Polished stainless steel. Can NOTE: High temperature paint. IH discolor from extreme heat. IH logo &
Engine parts logo & part number is stamped into the part number is stamped into the SIDE TOP HAT OF THE MUFFLER. If clamp OF THE MUFFLER. If raincap is needed is needed order ABC1867, ABC568 order IHS2294; If clamp is needed order or ABC341; If u-bolt is Tractorneeded order ABC2521. IHS1231. IHS500, IHS1944 dimensions: Inlet length: IHS500 IHS1944 IHS1217 dimensions: Inlet I.D.: 1.340", Inlet 2-1/8", Inlet I.D.: 2-3/8", Inlet O.D.: 2.525" for O.D.: 1.465", Outlet O.D.: 1.385"; Exhaust IHS500, 2.485" for IHS1944, Shell length: pipe: 1.375" O.D. x 9.5" length, Body: 21-3/4" 12-1/4", Shell dia.: 5.500", Outlet length 13", o/a length, 3" dia. x 10.875" length, Intake Outlet O.D.: 1-3/4" for IHS500, 1.785" for pipe: 1.313" I.D. x 1-7/8" length IHS1944, Overall length: 27-3/8"
IHS497 $49.99 IHS1940 $112.50 Fits: A, B, C, Supers, 100, 130, 200, 230, Replaces: 360720R91 SteinerIHS497: High temperature paint; IH logo & part number is stamped into the SIDE OF THE MUFFLER. If raincap is needed order IHS2563; if clamp is needed order ABC2625.
IHS1940: Polished stainless steel. Can discolor from extreme heat. IH logo & part number is stamped into the SIDE OF THE MUFFLER. If raincap is needed order IHS2291; if clamp is needed order ABC2519.
IHS497, IHS1940 dimensions: Inlet length: 2.250", Inlet I.D.: 1.975", Inlet O.D.: 2.080" for IHS497, 2.000" for IHS1940, IHS497 IHS1940 Shell length: 16.500", Shell diameter: 4.250", Outlet length: 10", Outlet O.D.: 1.385", Overall length: 28.750"
270 STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm Restoration quality mufflers cont... Economy mufflers - USA made cont... Part # USD Application Part # USD Application IHS1923 $74.99 Fits: M, Supers, I, T, W6, Supers, 400, 450 IHS309 $36.99 Fits: A, B, C, Supers, 100, 130, 140, 200, 230, gas, LP, diesel, Replaces: 357288R92 IHS1926 $139.99 240, F330, F340, I340, T340, 404, 3414 gas IHS1923: High temperature paint; IH Replaces: 360720R91 logo & part number is stamped into the SIDE OF THE MUFFLER. If raincap IHS309 dimensions: Inlet length: 2-3/4", Inlet is needed order IHS3101; If clamp is I.D.: 1-15/16", Shell length: 17", Shell dia.: needed order ABC2627. 4-1/4", Outlet length: 9-1/4", Outlet O.D.: 2", Overall length: 29" (If raincap is needed order IHS1926: Polished stainless steel. Can RCS005, if clamp is needed order ABC327) discolor from extreme heat. IH logo & IHS311 $36.95 part number is stamped into the SIDE Fits: H, Supers, I, W4 series, F300 - 350 gas OF THE MUFFLER. If raincap is needed Replaces: 350600R95 order IHS2701; If clamp is needed order IHS311 dimensions: Inlet length: 2-1/2", Inlet ABC2521. I.D.: 2-3/8", Shell length: 14-1/2", Shell dia.: IHS1923, IHS1926 dimensions: Inlet length: 5-1/2", Outlet length: 11-3/4", Outlet O.D.: 1.610", Inlet I.D.: 2.400" for IHS1923, 2.395" 2-1/2", Overall length: 29" (If raincap is needed IHS1923 IHS1926 for IHS1926, Inlet O.D.: 2.535" for IHS1923, order IHS2567 or RCS007, if clamp is needed 2.500" for IHS1926, Shell length: 15.500", order ABC351) Inc.® Shell dia.: 6", Outlet length: 13", IHS313 $39.99 Fits: H, M, Supers gas, diesel, I, T, W4, 6 IH/Farmall Outlet O.D.: 2.355" for IHS1923, 2.395" for IH/Farmall series, 300, 350, 400, 450, F460, I460, F560, IHS1926, Overall length: 30" Case IH I606 gas, LP, diesel, 656 IHS1930 $69.95 Fits the following gas, LP, diesel (unless Replaces: 350601R95, 370773R91, 403551R1 IHS1933 $134.95 noted): 340 diesel, 460, 504 diesel, 544, 560, 606, 656 gear drive, 660, TD340, (500 IHS313 dimensions: Inlet length: 2-1/2", Inlet Crawler SN: H2371 & up), 3514, 3616 I.D.: 2-3/8", Shell length: 13", Shell dia.: 6", Outlet length: 14", Outlet O.D.: 2-1/2", Overall Replaces: 370644R91 Engine parts IHS1930: High temperature paint; IH Parts,length: 29" (If raincap is needed order IHS2567 logo & part number is stamped into the or RCS007, if clamp is needed order ABC351) SIDE OF THE MUFFLER. If raincap IHS2239 $37.50 is needed order IHS2567; If clamp is Fits: 424, 444 gas, diesel; 504, 3514 gas only needed order ABC2627. Replaces: 381665R92, 403825R1
IHS1933: Polished stainless steel. Can IHS2239 dimensions: Inlet length: 2-1/2", Inlet discolor from extreme heat. IH logo & I.D.: 1-15/16", Shell length: 14-1/2", Shell dia.: part number is stamped into the SIDE 5-7/16", Outlet length 10", Outlet O.D.: 2", OF THE MUFFLER. If raincap is needed Overall length: 27" (If raincap is needed order order IHS2296; If clamp is needed order RCS005, if clamp is needed order ABC327) ABC2521. Tractor IHS1930 IHS1933 IHS041 $54.99 IHS1930, IHS1933 dimensions: Inlet length: Fits: 706 gas w/ C-263, (806 gas w/ C-301 2.063", Inlet I.D.: 2.400", Inlet O.D.: 2.540", & diesel w/ D-361), Replaces: 384345R1 Shell length: 12", Shell dia.: 6", Outlet length: 13", Outlet O.D.: 2.500" for IHS1930, 2.525" IHS041 dimensions: Inlet length: 3-1/2", Inlet for IHS1933, Overall length: 27-1/2" I.D.: 2-15/16", Shell length: 17", Shell dia.: 5-1/2", Outlet length: 14", Outlet O.D.: 3", Overall length: 34" (If raincap is needed order RCS009, if clamp is needed order ABC585) Economy mufflers - USA made IHS315 $49.50 Fits: I9, W9, T9 gas, diesel, TD14 diesel, IH Part #Steiner USD Application 600, 650 (C-350 gas, D-350 diesel engines) IHS317 $39.95 Replaces: 264116R91, 264117R91, Fits: F30, I30, W30 gas, TD18 diesel 303973R91 Replaces: 264126R92 IHS315 dimensions: Inlet length: 3-1/2", Inlet IHS317 dimensions: Inlet length: 4-3/4", Inlet I.D.: 3-1/8", Shell length: 14-1/2", Shell dia.: 6", I.D.: 2-3/4", Shell length: 15", Shell diameter: Outlet length: 3-1/2", Outlet O.D.: 3", Overall 4-1/4", Outlet length: 6-1/2", Outlet O.D.: length: 22" (If raincap is needed order RCS009, 2-3/4", Overall length: 26" (If clamp is needed if clamp is needed order ABC2234) order ABC585) Economy mufflers continue on next page
STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com 271 Economy mufflers - USA made cont... Exhaust stacks cont... Part # USD Application Part # USD Description / Application IHS1772 $129.99 Fits the following gas, LP: 666, 686, H70, IHS581 $124.50 Exhaust Stack fits: H, M, Supers, I, O, T, H86, 706, 766, 806, 826, 856; Diesels: (706 (Straight) W4, 6 series gas, diesel, 300, 340 diesel, w/ D310 German diesel), 806, 856 IHS568 $139.99 350, 350 Utility, 400 gas, diesel, 450 gas, Replaces: 530578R4 (w/ Bend) LP, diesel, I & F 460 gas, diesel, 560 gas, IHS1772 dimensions: Inlet length: 3-1/4", Inlet LP, diesel, 606 C-221 gas, diesel, 706 I.D.: 2-15/16", Shell length: 23", Outlet length: diesel w/ D282 engine, 660 gas, 656 gas, 8-1/4", Outlet O.D.: 3", o/a length: 34" (If clamp diesel, 544, 454, 574, 674 gas, diesel is needed order ABC585) (2-3/8” I.D., 3-1/2” O.D.,24” tall IHS1769 $139.99 (chrome) + 3” tall base) USA made NOTE: If raincap is needed order Fits: 1066, 1466, 1566, 4366, 4386 up to SN: RCS016, if clamp is needed order 2500, Replaces: 534546R6 IHS581 IHS568 ABC351. IHS241 $259.99 IHS1769 dimensions: Inlet length: 12", Inlet I.D.: 3-3/4", Shell length: 23", Outlet length: Exhaust Stack w/ Bend fits: 1026, 1066, 8-3/4", Outlet O.D.: 3-1/2", o/a length: 44" (If 1206, 1256, 1456, 1466, 1566, 4166, 4366, clamp is needed order ABC1771) 4386 (3-3/4” I.D., 5” O.D., 36” tall + 8” base) NOTE: Chrome,Inc.® Double-wall.
Exhaust stacks NOTE: Chrome; Double wall (Lined) unless otherwised noted.
Part # USD Description / Application
Case IH Restoration quality raincaps
IH/Farmall MHS050 $124.50 Part # USD Fits the following pipe O.D.: Exhaust Stack (Straight) fits: F20 IHS2291Parts, $31.99 (2-3/8” I.D., 3-1/2” O.D., 19” tall Fits: Cub, A, B, C, Supers, 100, 130, 200, (chrome) + 2” tall base) USA made 230, Replaces: 126114C1 NOTE: If raincap is needed order (1.370” - 1.475” range) RCS016, if clamp is needed order NOTE: Stainless steel. Fits IHS1936, ABC351. IHS1940 mufflers.
IHS2563 $12.95 Fits: Cub, A, B, C, Supers, 100, 130, 200, IHS571 $99.95 Engine parts 230 (All w/ restoration quality muffler (Straight) only), Replaces: 126114C1 IHS572 $124.50 (1.370” - 1.475” range) NOTE: High (w/ Bend) Exhaust Stack fits: CubTractor temperature paint. Fits IHS497, IHS1212, (1.355” I.D., 2-1/2” O.D., 18” tall + 3” IHS1706 mufflers. base) USA made NOTE: If raincap ABC3240 $31.99 is needed order IHS2296, if clamp is needed order ABC341. Fits: Mufflers & exhaust pipes w/ 1.500” - 1.600” O.D. range NOTE: Stainless steel. Measure outlet dia. before ordering.
IHS571 IHS572
IHS582 $124.50 ABC3158 $12.99 (Straight) Fits: Mufflers & exhaust pipes w/ 1.500” IHS569 Steiner$139.99 Exhaust Stack fits: A, B, C, Supers, 100, - 1.600” O.D. range NOTE: Steel w/ high (w/ Bend) 130, 140, 200, 230, 240, F & I 330, 340, temperature paint. T-340 Crawler (2” I.D., 3” O.D., 24” tall + 3” base) USA made IHS2294 $33.99 NOTE: If raincap is needed order Fits: H, I4, W4, Supers, 140, 240, 330, 340, RCS015, if clamp is needed order 300, 404, 350, 2404, 3414 ABC2519. Replaces: 378027R91 (Fits pipe O.D. of 1.700” - 1.810”) NOTE: Stainless steel. IHS582 IHS569 Fits IHS1944, IHS2569 mufflers.
272 STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm Restoration quality raincaps cont... Choke parts Part # USD Fits the following pipe O.D.: NOTE: Check cable length before ordering. Part # USD Description / Application IHS2565 $12.99 Fits: H, I4, W4, Supers, 140, 240, 330, 340, 300, 404, 350, 2404, 3414 IHS990 $18.95 Metal Sheathed Choke Cable fits: Cub Replaces: 378027R91 (Fits pipe O.D. of LoBoy 154 SN: 14536 & up, 184, 185 1.700” - 1.810”) NOTE: High temperature Replaces: 529926R1 (30” long) paint. Fits IHS500, IHS2535 mufflers. NOTE: Restoration quality. IHS3101 $12.99 Fits: M, Super M, MTA, 400, 450 IHS1250 $21.99 Choke Control Rod fits: Super A, Super Replaces: 321574R91 AV, 100; Serviceable for 130, 140 if bends (2.200” - 2.405” range) NOTE: High are modified, Replaces: 350744R1; temperature paint. Fits IHS1923 muffler. 366732R1 (44-3/8” length, 3/16” O.D.) IHS2701 $36.99 USA made Fits: M, Super M, MTA, 400, 450 JDS718 $21.50 Replaces: 321574R91 Metal Sheathed Choke Cable fits: IH / (2.200” - 2.405” range) NOTE: Stainless Farmall models w/ 47” or less cable steel. Fits IHS1926 muffler. NOTE: Metal sheathed w/ “CHOKE” on plastic knob. Cut to length. IHS2296 $34.99 Fits the following gas, LP, diesel (unless noted): 340 diesel, 460, 504 diesel, 544, IHS252 $16.95 Inc.® 560, 606, 656 gear drive, 660, TD340, (500 Choke Cable fits: IH 340, 404, 424, 444, 504, IH/Farmall Crawler SN: H2371 & up), 3514, 3616 2424, 2444, 2504, 3444 IH/Farmall Case IH (2.450” - 2.560” range ) NOTE: Stainless Replaces: 371796R92 (55” long) steel. Fits IHS1933 muffler, IHS571 straight pipe. IHS705 $15.99 Metal Sheathed Choke Cable fits: F300, IHS2567 $12.99 Fits the following gas, LP, diesel (unless F350, 656, 666, 686, 706, 756, 826, Hydro 70, noted): 340 diesel, 460, 504 diesel, 544, Hydro 86 (All w/ gas)
560, 606, 656 gear drive, 660, TD340, (500 Replaces: 363709R95 (64” long) Engine parts Crawler SN: H2371 & up), 3514, 3616; Parts, NOTE: Restoration quality. Will also fit M, Super M, MTA, 400, 450 if IHS250 $15.95 Metal Sheathed Choke Cable fits: F400, equipped w/ IHS311 or IHS313 mufflers, F450, W400, W450, 560, 660; The following but does not fit IHS1926 properly LP tractors: 706, 756, 806, 826, 856 (2.450” - 2.560” range) NOTE: High Replaces: 374218R92, 363710R93 temperature paint. Fits IHS311, IHS313, (71” long) NOTE: Restoration quality. IHS1930 mufflers. IHS699 $19.95 RCS014 $38.95 (2-1/2” O.D.) USA made Metal Sheathed Choke Cable fits: Farmall NOTE: Chrome plated. 460, 656 LP Row-Crop, 766, 806, 856, 2806, RCS015 $42.95 (3” O.D.) USA made 2856, Replaces: 374219R93 (69” long) NOTE: Chrome plated.Tractor NOTE: Restoration quality. RCS016 $45.95 (3-1/2” O.D.) USA made ABC423 $9.95 Universal Choke Cable fits: Tractors, NOTE: Chrome plated. Forklifts & other applications using 72” or less cable (72” long) NOTE: Metal sheathed. Cut to length. Can also be used as a ‘Stop’ cable for diesel engines. Economy raincaps ABC3210 $16.50 NOTE: Painted. Universal Engine Stop Cable (Diesel Fuel Shut Off) fits: Tractors, Forklifts & other
Part # USD Fits the following pipe O.D.: applications using 96” or less cable NOTE: Knob is imprinted w/ STOP. RCS002Steiner $9.99 (1-1/4” - 1-7/16” O.D.) Nylon sheathed. Cut to length. RCS003 $9.99 (1-1/2” - 1-11/16” O.D.) ABC2426 $4.99 Choke or Fuel Shut Off Cable Clip RCS004 $9.99 (1-3/4” - 1-15/16” O.D.) (For Marvel Schebler carburetors) RCS005 $10.99 (2” - 2-3/16” O.D.) fits: 330, 340, 404, 424, 444, 454, 504, 544, RCS006 $10.99 (2-1/4” - 2-7/16” O.D.) 574, 656, 666, 674, 686; Also works for diesel fuel cable shut off for 664, 826 RCS007 $11.50 (2-1/2” - 2-11/16” O.D.) Replaces: 373373R1 NOTE: See website RCS008 $9.99 (2-3/4” - 2-15/16” O.D.) for a complete listing of applications & RCS009 $13.50 (3” - 3-3/16” O.D.) carburetor numbers.
STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com 273 Carburetors, parts Carburetors, parts cont... Can't find your carburetor number? Look on page 392A. Part # USD Description / Application NOTE: Carburetors are limited to replacement only - NO ABC3453 $398.25 Carburetor, New fits: 454, 464, 504, 544, refunds. No replacement will be given if dirt, rust, etc. is found 574, 656, 666, 674, 686, 3514 in the carburetor or if it has been taken apart. Replaces: 405530R91, Marvel Schebler Part # USD Description / Application TSX 857, 925, 933, 934, 940, 942, 943, 955, IHS738 $295.00 Carburetor New, IHC Replacement 959, 961, 964, 965, 967, 968, 970, 974, 975, fits: Cub, Cub LoBoy w/ up to engine 984, 985; Zenith 12758, 13384, 13406, SN: 312389, Early 154, Replaces: 13465, 14996 (2-11/16” c.c. mounting 63349C91, 251234R94, 251293R91, studs, 1.299” throttle bore, 2.040” housing 364579R91 (1-13/16” c.c carb mounting O.D. for air cleaner hose) USA made holes, 15/16” throttle bore) NOTE: Looks NOTE: May look different from the like original IHC carburetor. Does not original. include IHS240 choke lever. Also fits IHS377 $479.50 Carburetor (Down Draft) fits: 2300 series, Cub carbs w/ ‘IH’ on float bowl. A, B250, B275, B414, 276, 354, 434, 444, IHS417 $349.99 Carburetor New, Zenith Replacement 2444, 3414, 3444, 7000 Forklift fits: Cub, 154, 184, 185 (All w/ engine SN: (All w/ BC-144 British engines) 312390 & up), Replaces: 70949C92, Zenith Replaces: 3063945R91, 3044193R92, 13781, 13794 (1-1/64” throttle bore) Zenith C1759 USA made NOTE: Looks NOTE: On older Cubs, customer may different, works Inc.®great! have to use (2) ABC543 carb gaskets to IHS240 $29.99 clear the butterfly. Choke Lever w/ Screw fits: Cub, Cub IHS420 $299.99 LoBoy (not 154, 184, 185) New Carburetor (New Marvel Schebler Replaces: 351324R1 Style) fits: A, AV, B, BN, C, Super A,
Case IH Super C, Replaces: Replaces TSX 156, 157, IHS2709 $23.95 Choke Lever w/ Screw fits: A, B, BN, IH/Farmall 319, 333; Zenith 9749, 9752 C, Supers (All using Zenith or Marvel (2-3/8” c.c. stud holes) Parts,Schebler w/ splined choke shaft) IHS905 $399.95 Carburetor (New, Zenith) fits: A, AV, B, Replaces: 8639D NOTE: See website for BN, C, Super A, Super C, 100, 130, 140, carburetor numbers. 200, 230, Replaces: 52499D, 375560R91, ABC297 $7.99 Carburetor Fuel Inlet Elbow & Strainer 377600R91; TSX 156, 157, 319; Zenith Assy. fits: A - Super C using Marvel 9749, 9752, 12115, 12122, 12123, 12225, Schebler carburetor (Male end (screen 12285, 12475, 12522, 12613, 12749, 14007 end) - 1/8” pipe thread; female end - 1/4” (2-3/8” c.c. stud holes) USA made flare) NOTE: Must have internal threads.
Engine parts NOTE: Direct bolt on. See website for Used w/ flare fitting not compression all carburetor numbers. fitting. ABC223 $394.95 Carburetor New, Zenith (12522) IHS966 $27.95 Carburetor Elbow w/ Strainer Assy. Replacement fits: A, B, BNTractor, C, Supers, (1/4" (For Carter Marvel Schebler & Zenith line) 100, 130, 140, 200, 230, 240, 330, 340, 404; carburetors) fits: A, B, C, Supers, 100, 130, Crawlers: 500, T-340, T4, T5; Windrower: 140, 154, 184, 185, 200, 230, 240, 330, 340, U-2, 201, Replaces: Marvel Schebler TSX 404, 424, 444, 504, 2424, 2444, 3514, T4, 156, 157, 171, 198, 319, 333, 347, 348, 730, T5, T340 IHS1124 $27.95 744, 748, 827, 926; Zenith 9749, 9752, IHS1124 Replaces: 53796D, 69938D, (5/16" 10514, 11115, 12911, 12122, 12115, 12285, line) 354827R91, (IHS966 is not factory) 12225, 12475, 12522, 16232 USA made NOTE: Check line size (2-5/16” c.c. stud holes) before ordering. Both fittings measure NOTE: Has 1-1/8” throttle bore. For 1/8” male pipe thread size at the end that Steinersome applications you must trim throttle threads into the carburetor. The IHS966 shaft to clear the block. Will fit 2-5/16” is for 1/4” O.D. fuel line. The IHS1124 - 2-3/8” c.c. stud holes because of the is for 5/16” O.D. fuel line. Both include smaller dia. studs that are included. one fuel line fitting. IHS3383 $297.25 IHS972 $17.99 Carburetor Fuel Line Fitting w/ Strainer Carburetor (New, IHC Replacement) (For IHC carburetor) fits:F12 , F14, H, fits: H, HV, I4, O4, W4 M, MD, MTA, Supers, I, O, T, W4 - W9 Replaces: 45108DB,DC,DD,DE, series, 300 - 856, 3616; Combines: 303 - 50981DA,DB,DC,DD 715, Replaces: 29902DX (1/4” pipe to 5/16” flare)
274 STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm Carburetors, parts cont... Carburetors, parts cont... Part # USD Description / Application Part # USD Description / Application
IHS2622 $2.99 Carburetor Fuel Line Fitting fits: 5/16” IHS1463 $15.95 Main Jet fits: Cub (1957-74) w/ IHC line; Cub - 856, Replaces: 29899D, carburetor, Replaces: 364610R91 58362DBX (1/4” NPT) USA made (.375” hex x .940” long w/ 0.035” jet) USA made ABC230 $7.49 VITON Needle Float Valve (For Marvel ABC1156 $23.95 Main Carburetor Nozzle (For Marvel A B C Supers Schebler carburetors) fits: , , , , Schebler carburetors) fits:A , AV, B, 100, 130, 140, 200, 230, 240, 330, 340 BN, C, U2 Power Unit (All w/ TSX156, (All w/ TSX 73, 156, 157, 171, 198, 319, 157, 319, 333), Replaces: Serviceable for 333, 348, 730, 744, 748, 827, 926, 930, 69968D, Marvel Schebler 47-270 948, 949), Replaces: 69956D, 382499R91, IHS1386 $24.95 Throttle Shaft (For Carter UT series Marvel Schebler 233-536 (.080” orifice) carburetor) fits: Super A, C, Super C, 100, USA made NOTE: Viton needle & seat 130, 200, 230 w/ cast iron upper body helps stop carb flooding. carb 733, 733S, 733SA, 733SB, 734, 734S, ABC133 $7.49 VITON Needle Float Valve (For Marvel 771, 771S, 771SA, 771SB, 2701S Schebler carburetors) fits: Late 424, 444, Replaces: 354805R91, R92, Carter 3-662S 454, 504, 544, 574, 656, 666, 674, 686 (.249” O.D., 2.475” machined length) (All w/ TSX 896, 927, 933, 934, 959, IHS1358 $14.50 Throttle Shaft (For IH carburetor) 974, 975), Replaces: 392096R91, Marvel fits: H, HV, 4 Inc.®series (All w/ carb Schebler 233-543, 233-595 (0.100” orifice) 45108DB, 45108DC, 50981D) IH/Farmall USA made NOTE: Viton needle & seat Replaces: 45112DAX (2.875” shaft length) IH/Farmall
helps stop carburetor flooding. NOTE: Has steel governor drive keyway. Case IH IHS995 $58.95 Carburetor Float Valve Assembly IHS1359 $18.95 Throttle Shaft (For IH carburetor) fits: MD series, ID, OD, TD, WD6 - 9 fits: Super H, M, 6, 9 series, Supers, series, 400D - 650D series (All diesels MTA, 600, 650, (F300 - 450 distillate, w/ F8 starting carburetor) kerosene), Replaces: 54488DAX USA made (3.314” shaft length) NOTE: Has steel
Replaces: 32581DXB Engine parts governor drive keyway. ABC564 $27.50 Main Jet Adjustment Needle Assembly Parts, (For Zenith carburetors) fits: Some A, IHS1357 $14.50 Throttle Shaft (For IH carburetor) B series w/ carb 8928, 9167, 9749, 9752, fits: M, MV, 6 series w/ IH carb 50983D 11776; C w/ carb 10441, A; Super A w/ & throttle body 6513D, Replaces: carb 10522, A, 11339, A; Super C w/ carb 47389DAX, 47389DX (3.195” shaft length) 11340, A, 14008; 100 - 230 w/ carb 12341, NOTE: Has steel governor drive keyway. A, B, 12342, A, B, 12632; Power Units IHS968 $35.99 Throttle Shaft (For original British Zenith U-169 w/ carb 11927, U-263 w/ carb carburetor) fits: 2300A, B250, B275, 276, 12747, Replaces: 53786D, B51326, Zenith B414, 354, 434, 444, 2300, 2444, 3414, 3444, 71-21 (3/8”-24 thread) USA made 7000 Fork lift (All w/ BC 144 engine & carb VN, VNN, VNP) IHS1465 $15.95 Idle Tube (Pick up Tube) fits: Cub Tractor Replaces: 3047470R1 USA made (1947-74) w/ IHC carburetor NOTE: Will not fit IHS377 carburetor. Replaces: 251331R1, 352140R1 (.1085” dia. x 1.795” long) USA made ABC513 $2.69 Throttle Body Repair Bushing (For small bowl Marvel Schebler carburetor) IHS1460 $15.69 Main Nozzle fits: Cub (1947-56) fits: A, B, C series, Supers, 100 - 444 w/ IHC carburetor w/ small bore (0.247” I.D., 0.383” O.D., 0.501” length) Replaces: 352138R31 USA made NOTE: Repairs worn throttle (.3125” hex x 1.777” long x .122” tube body using 1/4” throttle shafts. Must w/ .060” hole) USA made NOTE: Brass; ream to size. Has 4 discharge holes. ABC1159 $4.99 Throttle Disc (For Marvel Schebler IHS1462Steiner $15.69 Main Nozzle fits: Cub (1957-78) carburetors) fits: A, AV, B, BN, C, U2 w/ IHC carburetor w/ large bore (All w/ TSX156, 157, 171, 198, 319) Replaces: 251332R11 Replaces: 69944D (15 degrees, 1.105” (.3125” hex x 1.777” long x .122” tube O.D.) USA made NOTE: Steel. w/ .100” hole) USA made ABC1182 $18.95 Choke Disc (For Marvel Schebler NOTE: Brass; Has 6 discharge holes. carburetors fits: 330, 340 both w/ TSX IHS1461 $15.95 Main Jet fits: Cub (1947-56) 748, 827, Replaces: 373370R91, Marvel w/ IHC carburetor, Replaces: 351804R1, Schebler 27-530, 27-539 (1-5/16” O.D.) 354192R91 (.375” hex x .940” long NOTE: Galvanized steel. w/ 0.030” jet) USA made Carburetors, parts continue on next page
STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com 275 Carburetors, parts cont... Carburetor gaskets cont... Part # USD Description / Application Part # USD Description / Application ABC4318 $18.99 NEW! Choke Butterfly Disc fits: 454, 464, IHS2283 $3.95 504, 544, 574, 656, 666, 674, 686, Hydro Carburetor Gasket Kit fits: H series, I4, 70, Hydro 86; Industrial: 2400A, 2400B, O4, W4 (All w/ 45108, 50981 carbs) 2500A, 2500B, 3400A, 3500A, 3514 Replaces: 46370D, 24520DA, 18377D, (All w/ TSX 857, 925, 927, 932, 932SL, 933, (2) 25948D, 45142D USA made 934, 934SL, 940, 940SL, 943, 959, 961, 974, 974SL, 975, 975SL, 984SL, 985SL) IHS2279 $3.95 Carburetor Gasket Kit fits: Super H, M Replaces: 68101C91, 381960R91 & Supers, MTA, I, O, T, U, W6 series, (1.853” O.D. across the flats) 300, 350, 400, 450, 460, 544, 560, 600, 606, IHS2670 $34.95 650, 656, 660, 706 - 856, Replaces: 18377D, Venturi fits: H, HV, I4, O4, OS4, U4, W4 25948D, 31336D, 32615D, 47388DA, w/ carb 45108D or 50981D 47401D, 387454R92 NOTE: All using IH Replaces: 45118D, 64986D carbs. NOTE: Zinc, like original. IHS997 $14.95 2-pc. Gasket Kit fits: MD series, ID, OD, ABC1167 $10.69 Venturi (For Marvel Schebler carburetors) TD, WD6 - 9 series, 400D - 650D series fits: U2, 330, 340 (All w/ TSX171, 748, (All diesels w/ F8 starting carburetor) 827), Replaces: 69958D, Marvel Schebler Replaces: 53459DA, 32606DD USA made 46-467 (11/16” dia. throat) NOTE: Plastic. Inc.® ABC3233 $3.95 Carburetor Gasket Kit (For small bowl IHS3647 $49.99 Carburetor Drain Trough fits: MD series, Marvel Schebler carburetors) fits: A, B ID, OD, TD, WD6 - 9 series, 400D - both w/ TSX 156, 157; Super A, Power 650D series (All diesels w/ F8 starting Units (All w/ TSX 156, 157, 171, 198, carburetor), Replaces: 58843DX 333, 348, 926); C w/ TSX319; Super C w/ USA made NOTE: See website for all
Case IH TSX333; 130, 140 both w/ TSX 730, 864; applications. IH/Farmall 200, 230, 240 (All w/ TSX744); 340 w/ TSX 748; 404 w/ TSX 748, 827; 424, 444 both Parts,w/ TSX896SL; 500C w/ TSX 930, 948, 949; Carburetor gaskets 2444 w/ TSX896, Replaces: 373359R91 (4-5/16” o/a bowl gasket length) USA made Part # USD Description / Application ABC2275 $3.95 Carburetor Gasket Kit (For Big Bowl ABC543 $1.95 Manifold to Carburetor Gasket (For IH Marvel Scheblers) fits: Some 454, 464, 504, carburetor) fits: Cub up to SN: 196899, 544, 574, 656, 666, 674, 686 (All w/ TSX Early 154, Replaces: 251235R1 857, 927, 934, 959, 974, 975)
Engine parts (1-13/16” c.c. bolt holes, 15/16” center hole) USA made Replaces: 400429R93 (5” bowl gasket length) USA made ABC408 $1.39 Manifold to Carburetor Gasket fits: A, B, C, Supers, F12, F14, 100, Tractor130, 140, 200, 230, 240, 330, 340, 404, Replaces: 382116R2 (2-3/8” - 2-7/16” slotted bolt holes, Carburetor floats 1-1/8” center hole) USA made Part # USD Application ABC410 $1.59 Manifold to Carburetor Gasket For Original IHC carburetors fits: IH/Farmall models (2-15/16” c.c. IHS360 $52.50 bolt holes, 1-3/4” center hole) Fits: Farmall “Regular”, 10-20 ABC416 $1.39 Manifold to Carburetor Gasket McCormick Deering, Replaces: 16876 fits: B250, B275, B414, H, W4, 354, 434, (1.982” O.D., 0.964” I.D., 0.285” wide slot, 3414, Replaces: 24520DA, 3047295R91 0.665” thick) NOTE: Cork. Steiner(2-3/8” c.c. bolt holes, 1-5/16” center hole) IHS618 $30.95 ABC424 $1.59 Manifold to Carburetor Gasket fits: F30, Fits: F12, F14, I, O, W12, W14 W30, Super H, M, Super M, MTA, 300, Replaces: 25945D 350, 400, 450, 454, 460, 464, I6, W6, Super (1.760” O.D., 1.000” wide) W6, W9, T6, T9, 504, 560, 574, 656, 666, 674, 686, 706, 756, 766, 806, 826, 856, IHS575 $79.99 2400A, 2400B, 2500A, 2500B, 3400A, Fits: F20, (IH F20 w/ carb 6392), T20; 3500A, Replaces: 21632D, 530681R2 Also fits F30, W30 both using K5 (2-11/16” c.c. bolt holes, 1-1/2” center carburetor, Replaces: 21170D hole) NOTE: Perforated steel core.
276 STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm Carburetor floats cont... Carburetor floats cont... Part # USD Application Part # USD Application
For Original IHC carburetors cont... For Zenith carburetors cont... IHS204 $18.75 ABC454 $34.50 Fits: Cub, Early 154 using IH carb Fits: 606 w/ 13021 or carb 389511R92, Replaces: 251293R91 UB220 w/ 11809A, Replaces: 55589D (1.405” O.D., .790” wide)
ABC2557 $30.50 (For British Zenith Carburetors) IHS203 $18.75 Fits: H, W4, I4, O4 fits: B250, B275, B276, B414, 354, 364, Replaces: 45114D 434, 444, 2300, 2300A, 2444, 3414, 3444, (1.550” O.D., .773” I.D. wide) (7000 Forklift) (All w/ British Zenith carburetors VN, VNN, VNP, C1751, IHS387 $20.95 Fits: Farmall Super H, M, Supers, I, O, C1759, C1836), Replaces: 3047463R91 T, W6 series, W9, 300, 350, 400, 450, 460, (1.580” O.D. x 0.871” tall) 544, 560, 574, 606, 600, 650, 656, 660, 666, NOTE: Float bar not included. 674, 706, 756, 766, 806, 826, 856, 2500 gas Replaces: 47398D For Carter carburetors Carburetor repair kits NOTE: Can't find your carburetor Inc.®number? Look on page 392A. ABC522 $38.50 Fits: C, Super A, Super C, 200, 230, 240 IH/Farmall Replaces: 21121S, 354813R91 Economy carburetor repair kits include needle & seat, float IH/Farmall NOTE: All w/ cast iron throttle bodies. lever pin, seal, gaskets & instructions. Case IH
For Marvel Schebler carburetors Basic carburetor repair kits include throttle shaft, needle ABC036 $13.99 Fits: A, B, C, Supers, 100, 130, 140, 200, & seat, float lever pin, seal, gaskets & instructions. 230, 240, 330, 340, 404, 424, 444, 504 (All Complete carburetor repair kits include choke & throttle
w/ TSX 156, 157, 319, 333, 348, 744, 748, Engine parts shafts, needle & seat valve, float lever pin, miscellaneous plugs 827, 864, 896, 926); U2 Power Units w/ Parts, & screws, throttle shaft seals, adjustment screw & gaskets. TSX 171, 198; Crawlers: T340, T5, 500 Replaces: 69919D, Marvel Schebler 30-600 Premium carburetor repair kits include throttle shaft, throttle ABC037 $19.95 Fits: 454, 464, 544, 574, 674 (All w/ plate, choke shaft, choke plate, throttle shaft bushings and TSX959), 504, Hydro 70, Hydro 86, 686, packing, metering nozzle, brass plugs, float pin, needle & seat, 2400, 2500A, 2500B, 3514; Power Unit w/ drain petcock, gaskets, fuel strainer & more. TSX 925, 932, 932SL, 933, 939; Combines: Part # USD Description / Application 105, 203, 205, 315 (All w/ TSX 857, 927, 933, 934, 939, 940, 946, 959, 974, 980, 984SL, 985 Economy carburetor repair kits SL), Replaces: 381962R1, Marvel Schebler ABC228 $24.50 Economy Carburetor Repair Kit (For IHC 30-631, 30-739, ZenithTractor C85-156 carburetors) fits: Cub, Early 154 both For Zenith carburetors w/ 63349C91, 364579R91, 251234R94, 251293R91 USA made NOTE: Fits carbs ABC190 $16.99 Fits: Cub, Cub LoBoy, A, B, C, Supers, w/ ‘IH’ emblem on float bowl. 100, 130, 140, Late 154, 200, 230, 240, 330, 340, 404, Power Unit (All w/ carb 8928, ABC1346 $26.95 Economy Carburetor Repair Kit 9167, 9318, A, 9722, 9748, 9749, 9750, (For Zenith carburetors) fits: Cub, Cub 9751, 9752, 10386, A, C, 10441, A, 10498, LoBoy, 154, 184, 185, A, B, C, Supers, 10514, A, 10522, A, 10652, 11985, 11115, 100, 130, 140, 200, 230, 240, 330, 340, 404, A, 11188, 11338, A, B, C, 11339, A, 11340, 424, 500 Crawler (All w/ carb 8928, 9167, A, 11548, 11704, A, B, 11776, 11812, A, 9318, A, 9748, 9749, 9750, 9752, 10386, A, 11882, 12020, 12115, 12122A-C, 12123, A, C, 10441, A, 10498, 10514, 10522, A, 10652, SteinerB, 12193, A, 12225, A, B, 12285, A, 12340, 10998, 11115, A, D, 11188, 11888 A, C, 11338, 12341, A, B, 12342, A, B, 1247S, 12522, A, 1338B, C, 11339, A, 11340, A, 11548, 12612, 12613, 12632, 0-12911, 0-13028, 11704, A, B, 11867, 11882, 12020, 12115, 0-13056, 13781, 13794, 14007) 12122, 12123, 12193, 12225, 12285, 12340, Replaces: 53783D, Zenith C85-28 12341, 12342, 12475, 12476, 12612, 12613, ABC452 $24.99 Fits: 444, 504, 544, 666 (All w/ carb 12351, 12632, 12750, 12911, 13028, 13056, 13415, 12685, 12758, 13024, 13384, 13716); 3514 13542, 13781, 13794, 14007, 14008) Replaces: 385608R91 USA made w/ carb 13396; Power Units w/ carb NOTE: Fits 61, 68, 161 series Zenith carbs. 13406, 13465, 13588, Replaces: Zenith C85-115 Carburetor repair kits continue on next page
STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com 277 Carburetor repair kits cont... Carburetor repair kits cont... NOTE: Can't find your carburetor number? Look on page 392A. Part # USD Description / Application Economy carburetor repair kits cont... Economy carburetor repair kits include needle & seat, float lever pin, seal, gaskets & instructions. ABC311 $28.95 Economy Carburetor Repair Kit (For IHC carburetors) fits: Super H w/ Basic carburetor repair kits include throttle shaft, needle 358065R91, 358554R91; M w/ 47387DC, & seat, float lever pin, seal, gaskets & instructions. 50983DC; Super M, MTA w/ 356948R92, 357231R92; I9, T9, W9, Super W9, WR9S Complete carburetor repair kits include choke & throttle w/52814D, 52815D, 60329DA, 61798D; shafts, needle & seat valve, float lever pin, miscellaneous plugs 300, 350 (w/ 361525R92, 363741R93); & screws, throttle shaft seals, adjustment screw & gaskets. 400 w/ 362173R92; 450 w/ 362957R91; 460 w/ 367258R92, 380956R96; 544 w/ Premium carburetor repair kits include throttle shaft, throttle 406803R91; 560 w/ 352063R91, 367259R92, plate, choke shaft, choke plate, throttle shaft bushings and 381984R9; 600, 650 w/ 366066R91; 606 w/ packing, metering nozzle, brass plugs, float pin, needle & seat, 380956R91; 656 w/ 386424R96, 388296R92, drain petcock, gaskets, fuel strainer & more. 388297R94; 660 w/ 372723R92, 379813R95; Part # USD Description / Application 706, 756, 806, 826, 856 w/ 352063R91, 378196R94, 381419R91, 381420R91, Economy carburetor repair kits cont... 387182R92, 388424R96, 388425R96, ABC220 $24.50 Economy Carburetor Repair Kit 396197R93, 396198R1,Inc.® 534932R1, (For Marvel Schebler carburetors) 533622R91, 534933R91; 766 w/ 539575R91; fits: A, B both w/ TSX 156, 157; Super A, 2544 w/ 406804R91; Power Units w/ TSX 156, 157, 171, 198, Combine w/ 379813R95 USA made 333, 348, 926; C w/ TSX319; Super C w/ NOTE: Fits IH carbs only. TSX 333; 130, 140 both w/ TSX 730, 864; ABC1344 $22.95
Case IH 200, 230, 240 (All w/ TSX 744); 340 w/ TSX
IH/Farmall 748; 404 w/ TSX 748, 827; 424, 444 w/ TSX 896SL; 500C w/ TSX 930, 948, 949; 504 w/ Economy Carburetor Repair Kit TSX 857; 2444 w/ TSX 896 USA made Parts,(For Marvel Schebler carburetors) fits: 504, 3514 both w/ TSX 857 USA made ABC3933 $45.95 Economy Carburetor Kit (For Carter carburetor) fits: Super A, Super AV, C, Super C, 100, 130, 140, 200, 230 USA made NOTE: Many Carter carburetors are ABC1349 $24.95 Economy Carburetor Repair Kit missing the tag & can not be identified. (For Zenith carburetors) fits:444 , 504, This kit has all 5 bowl gasket variations 666, 686, 756, 766, 2444, 3514; Hydros: 70, along with both style needles and seats 86; Combines: 93, 105, 203 (All w/ carb Engine parts fitting all Carter carburetors. 12351, 12685, 12758, 13384, 13406, 13465, ABC1387 $33.95 NEW! Economy Carburetor Repair Kit 13588, 13716), Replaces: Zenith K2048, (For Carter carburetors) fits:Tractor Super A, K2049, K2050, K2136 USA made Super AV, 100, 130, 140, 200 w/ aluminum FDS212 $23.95 Economy Carburetor Repair Kit upper throttle body 0-1146, 0-1177, 0-1178, (For Marvel Schebler carburetors) fits: 454 0-1396, 0-1397 w/ carb UT, UT2257S, w/ TSX 959; 504 w/ TSX 857; 544 w/ TSX UT26125 & OEM carb 373957R91, 934; 574 w/ TSX 959; 656 w/ TSX 927; 666 373959R91, 373961R91, 373962R91 w/ TSX 974, 975; 674 w/ TSX 959; 686 w/ (7/16”-24 special fine thread seat) TSX 974; 2504 w/ TSX 857; 2544 w/ TSX IHS729 $29.50 934; 3514 w/ TSX 857, 943, 959, Power Economy Carburetor Repair Kit Units w/ TSX932, 932SL, 933, 939, 940, (For IHC carburetors) fits: F12, O12, W12; 984SL USA made F14, O14, W14 (All w/ OEM carbs 24707 SteinerB, C OR D, 29953D, 29954DB) IHS2991 $49.99 Economy Carburetor Repair Kit (For IHC carburetors) fits: B250, B275, ABC1348 $24.95 Economy Carburetor Repair Kit B414, 276, 354, 434, 444, 2300, 2300A, (For Zenith carburetors) fits: Power Units 2444, 3414, 3444, (7000 Forklift) w/ U169, U220, U240, U269, U282 (All w/ BC144 engines using VN, VNN, VNP, carb 11175,A, B, 11176,A, B, 11237,A, 3044193R92, 3063945R91, 3106595R91 11237D, 11670, 11697, 11698, 11927, 11978, carburetors USA made NOTE: Includes 12106), Replaces: 262523R92, 262526R92, needle & seat, gaskets & instructions. 262525R92, 269477R91, 270802R91, Will NOT fit IHS377 replacement 270804R91, 274648R91 USA made carburetor.
278 STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm Carburetor repair kits cont... Carburetor repair kits cont... Part # USD Description / Application Part # USD Description / Application Basic carburetor repair kits Basic carburetor repair kits cont... IHS4212 $41.95 ABC465 $29.95 Basic Carburetor Repair Kit Basic Carburetor Repair Kit (For IHC carburetors) fits: Super H w/ F12 O12 W12 (For IHC carburetors) fits: , , ; 358065R91 or 358554R91; M, MV, W6, F14 O14 W14 , , (All w/ 24707 B,C,D, I6, O6 (All w/ 50983D & throttle body 29953D, 29954DB) 8557D or 8867D); Super M, MTA, Super W6 (All w/ 356948R92); W9, WR9, I9 IHS574 $43.99 Basic Carburetor Repair Kit (For K5, K5A (All w/ 52814D, 52815D, 60329D); 300, Zenith carburetors) fits: F20, T20 both w/ 350, 400, 450, 600, 650 (All w/ 361525R92, carb 35539D; F30, W30 both w/ carb K5, 362173R92 - must reuse idle adjustment K5A, Replaces: 6392, 21271D, 20590D, screw) (3.314” throttle shaft length) 21950D, 29472D, 37449D ABC203 $29.95 IHS820 $30.95 Basic Carburetor Repair Kit Basic Carburetor Repair Kit (For IHC carburetors) fits: Cub w/ (For Marvel Schebler carburetors) fits: 130, 63349C9, 251234R94, 251293R91, 140, 200, 230, 240, 330, 340, 404, 424, 444 364579R91 NOTE: Includes throttle shaft, (All w/ TSX 730, 744, 748, 827, 896, 896SL) choke & throttle shaft seals, needle & seat, gaskets, idle adjustment screw. ABC469 $41.99 Inc.® Fits carburetors w/ ‘IH’ emblem on float Basic Carburetor Repair Kit IH/Farmall bowl. (For IHC carburetors) fits: 460, 560, 606, IH/Farmall
ABC467 $34.99 660 w/ 367258R92, 367259R92, 372723R92, Case IH Basic Carburetor Repair Kit 380956R94, 381984R91 (For Marvel Schebler carburetors) fits: A, B, BN, C, Super A, Super C IHS3206 $41.95 Basic Carburetor Repair Kit fits: 560, (All w/ TSX 156, 157, 319, 333) 656, 660, 706, 756, 766, 806, 826, 856
w/ 378196R91, 379813R91, 381420R91, Engine parts ABC145 $35.99 Parts,388296R91, 388297R91, 388424R91, Basic Carburetor Repair Kit 388425R91, 396197R91, 396198R91, (For Zenith carburetors) fits: A, B, BN, 533621R91, 533622R91, 539575R91, Super A, AV (All w/ 9748, 9749, 9752, (R92, R93, R94, R96) 10514A) ABC463 $29.95 Basic Carburetor Repair Kit ABC147 $41.50 (For Marvel Schebler carburetors) fits: 454, Basic Carburetor Repair Kit 464, 574, 674, 2400A, 2400B, 2500A, 2500B (For Zenith carburetors) (All w/ TSX 939, 984SL, 985SL) fits: Super A, Super C both w/ 11115 Complete carburetor repair kits TractorIHS825 $49.99 Complete Carburetor Repair Kit ABC231 $49.95 Basic Carburetor Repair Kit (For Carter (For IHC carburetors) fits: Cub w/ carburetors w/ cast iron upper body) 63349C9, 251234R94, 251293R91, fits: Super A SN: 255418 & up, C, Super 364579R91 NOTE: Includes discharge C, 100, 130, 200, 230 (w/ UT734S, UT652, tube, choke shaft, idle adjustment UT771SA), Replaces: 76769R1 screws, fuel screen. Fits carburetors w/ (5/16” - 24 UNF fine thread seat) ‘IH’ emblem on float bowl. NOTE: On some applications you may also have to order the ABC1903 carb. kit ABC146 $42.50 to get the correct bowl gasket. Complete Carburetor Repair Kit ABC162Steiner $29.95 (For Zenith carburetors) fits:A , B, BN Basic Carburetor Repair Kit (All w/ 8808) (For IHC carburetors) fits: H, HV, 4 series (All w/ 45108DB, DC, DE, 50981D, DD) ABC142 $49.99 Complete Carburetor Repair Kit IHS1896 $31.50 Basic Carburetor Repair Kit (For Zenith carburetors) fits:A , B, Super (For IHC carburetors) fits: I6, M, MV, A, AV (All w/ 10514A); 100, 130 both w/ O6, W6 series w/ carburetor 47387DB, 11340, 11704 50983DB & throttle body 6513DX (3.195” long throttle shaft) Carburetor repair kits continue on next page
STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com 279 Carburetor repair kits cont... Carburetor repair kits cont... NOTE: Can't find your carburetor number? Look on page 392A. Part # USD Description / Application Premium carburetor repair kits cont... Complete carburetor repair kits include choke & throttle IHS3328 $79.99 shafts, needle & seat valve, float lever pin, miscellaneous plugs Premium Carburetor Repair Kit & screws, throttle shaft seals, adjustment screw & gaskets. fits: Super H, Super HV, Super W4 (All w/ carb 358065R91 or 358554R91) Premium carburetor repair kits include throttle shaft, throttle Replaces: 354453R93 plate, choke shaft, choke plate, throttle shaft bushings and packing, metering nozzle, brass plugs, float pin, needle & seat, IHS3319 $79.99 Premium Carburetor Repair Kit fits:M , drain petcock, gaskets, fuel strainer & more. MV, I6, O6, W6 (All w/ carb 47387D, DB, DC, 50983D, DB, DC, DD & throttle body Part # USD Description / Application 6513D, 6513DX), Replaces: 354453R93 Complete carburetor repair kits cont... (3.195” throttle shaft length) ABC179 $49.99 IHS3323 $79.99 Premium Carburetor Repair Kit fits:M , Complete Carburetor Repair Kit MV, I6, O6, W6 (All w/ carb 47387D, DB, (For Zenith carburetors) fits: A, B, Super DC, 50983D, DB, DC, DD & throttle body A, AV, C (All w/ 9752) 8557D, DX, 8867D), Replaces: 354453R93 (3.314” throttle shaft length) IHS3332 $79.99 ABC144 $49.99 Premium Carburetor Repair Kit fits:Super M, Super MTA, SuperInc.® W6, Super W6TA Complete Carburetor Repair Kit (All w/ carb 356948R91, R92, 357231R91, (For IHC carburetors) fits: H, HV, I4, O4, R92), Replaces: 354453R91 W4 (DISTIL.) (All w/ 45108D, 50981D) (3.314” throttle shaft length) IHS3613 $62.99 Premium Carburetor Repair Kit ABC181 $59.99 Case IH Complete Carburetor Repair Kit (For Marvel Schebler carburetors) IH/Farmall (For IHC carburetors) fits: M, MV, I6, O6, fits: 130, 140, 330, 340, 404, 2404 w/ TSX W6 w/carb 50983D, throttle body 8557D 730, 827 or 8867D (3.314” throttle shaft length) Parts, IHS3616 $79.99 ABC182 $56.50 Premium Carburetor Repair Kit (For IHC Complete Carburetor Repair Kit carburetors) fits: 300, 350 w/ 361525R91, (For IHC carburetors) fits: M, MV, I6, O6, R92 W6 w/ carb 50983D or 43787D BOTH w/ throttle body 6513D only (3.195” throttle IHS3654 $62.99 shaft length) Premium Carburetor Repair Kit
Engine parts Premium carburetor repair kits (For Marvel Schebler carburetor) fits: 330, 340, 404, 2404, T340, T340A IHS3607 $62.99 w/ TSX 748 Premium Carburetor Repair Kit (For Marvel Schebler carburetor)Tractor IHS3618 $79.99 fits: A, AV, Super A, Super AV, Super A1, Premium Carburetor Repair Kit Super AV1, B, BN w/ TSX 156 (For IHC carburetors) fits: 400, 450, W400, W450 w/ 362173R91, R92 IHS3609 $62.99 Premium Carburetor Repair Kit IHS3628 $62.99 (For Marvel Schebler carburetor) Premium Carburetor Repair Kit fits: A, AV, Super A, Super AV, Super A1, (For Marvel Schebler carburetors) Super AV1, B, BN w/ TSX 157 fits: 424, 444, 2424, 2444 (All w/ TSX 896, 896SL) IHS3611 $62.99 Steiner IHS3630 $62.99 Premium Carburetor Repair Kit Premium Carburetor Repair Kit (For Marvel Schebler carburetor) (For Marvel Schebler carburetors) fits: 444, fits: C w/ TSX 319 454, 464, 574, 674, Industrials w/ TSX 934, 943, 959, 984SL, 985SL IHS3164 $79.99 IHS3620 $79.99 Premium Carburetor Repair Kit Premium Carburetor Repair Kit fits: H, HV, I4, O4, OS4, W4 (For IHC carburetors) fits: 460 w/ (All w/ 45108DB, DC, DD, DE, 50981D, 367258R91, R92 NOTE: Must reuse old DB, DC, DD) nozzle.
280 STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm Carburetor repair kits cont... Fuel injector, parts
Part # USD Description / Application Part # USD Description / Application Premium carburetor repair kits cont... IHS3720 $26.75 Fuel Injector Nozzle Holder (Sleeve) IHS3622 $79.99 fits: 385, 395, 454, 464, 474, 484, 485, 495, Premium Carburetor Repair Kit 544, 574, 584, 585, 595, 624, 664, 674, 684, (For IHC carburetors) fits: 560 685, 686, 695, (706 w/ D310 engine), 756, w/ 367259R91, R92 784, 785, 786, 826, 884, 885, 886, 895, 3088, 3288, Hydros 84, H86; Industrials w/ D155, D179, D206, D239, D246, D310, IHS4037 $79.95 D358 engines, Replaces: 3055344R1 Premium Carburetor Repair Kit (3.190” o/a length, 0.386” injector tip I.D.) (For IHC carburetors) fits: 656, 706, 756 NOTE: Brass finish. See website for all (All w/ 381419R91, R92, 396198R91, R92) applications. IHS3481 $64.50 Fuel Injector (New, not rebuilt) fits: 966 IHS3624 $79.99 Premium Carburetor Repair Kit gear drive, 1066, (1086 up to engine SN: (For IHC carburetors) fits: 656, 706, 756, 140023), 1466, (1486 up to engine SN: 766 w/ 388424R91, R92, R93, R94, R95, 100077), 1566, (1586 up to engine SN: R96, 396197R91 100393), 3688, 4166, 4186; Combines: 815 IHS3626 $79.99 SN: 8000 & up, 915 SN: 2350 & up, 1440 Premium Carburetor Repair Kit w/ engine SN:Inc.® 66058 & up, 1460 up to (For IHC carburetors) fits: 806, 826, 856 engine SN: 100007, 1480 up to engine SN:
(All w/ 388425R91, R92, R93, R94, R95, IH/Farmall 103041 (All w/ D414, DT414, D436, DT436 IH/Farmall
R96, 533622R91, R92) Case IH engines), Replaces: 631571C91, 675967C91 IHS3862 $5.49 Fuel Injector Grommet Dust Seal fits: 666, 686, 766, 886, 966, 986, 1066, 1086, 1466, Fuel pump repair kits - USA made 1486, 1566, 1586, 3388, 3488, 3588, 3688, NOTE: Not for use w/ methanol blended gas. 3788, 4166, 4186, 4366, 4568, 4586, 4786, Parts,5088, 5288, 5488, 6388, 6588, 6788, 7288, Engine parts IHS165 (Basic) & IHS164 (Complete) kits include diaphram, 7388, 7488, 7588, 7788, Hydro 70, Hydro mounting gasket, fuel bowl screen, gasket. 86, Hydro 100, Hydro 186 (All diesels) Replaces: 675478C1, 682810C1, 1342831C1 IHS854 (Complete) kit also includes pivot shaft, plunger, (1.120” O.D., .635” I.D., .625” tall) springs, retainers, packings. NOTE: Sold individually. See website for all applications. IHS164 (Complete) kit also includes diaphram shaft, pivot shaft, plungers, springs, retainers, packings, caged valve.
Part # USD Description / Application Governor, parts IHS165 $59.95 Part # USD Description / Application Basic Fuel Pump RepairTractor Kit fits: F12, F14, IHS4375 $25.99 NEW! Seal fits: Cub, Cub Loboy, 154, 184, I9, I12, O12, O14, T9, W9, W12, W14 185, Replaces: 251379R91 NOTE: For Early & Late Pump. (3.256” O.D., 2.063” I.D., 0.500” wide) USA made NOTE: Fits as a magneto or IHS854 $64.95 Complete Fuel Pump Repair Kit distributor drive seal. fits: F12, F14, I9, I12, O12, O14, (W9 up IHS748 $176.75 Governor Assembly fits: A, B, C & Supers, to SN: 31732), W12, W14, T6 up to SN: 100, 130, 140, 200, 230, 240, 330, 340, T340, TBKM6887, T9 up to SN: 9440 USA made T5, 404, 424, 444, 500 Crawler, 504, 2424, NOTE: For early & original (O.E.M.) AC 2444, some 3514 gas, Replaces: 375778R11, replacement pump (24527D) w/ a hair 374710R1 NOTE: 33 teeth. Steinerspring check valve. The diaphram is attached onto the shaft w/ nut. IHS4190 $42.30 Governor Thrust Bearing Assembly fits: A, B, C, Supers, Cub, Cub LoBoy, 100, IHS164 $112.95 Complete Fuel Pump Repair Kit fits: F12, 130, 140, 154, 184, 185, 200, 230, 240, 330, F14, I12, O12, O14, T6 SN: TBKM6888 & 340, 404, 424, 444, (460 up to engine SN: up, T9 SN: TCBM9441 & up, W9 SN: 31733 & up, W12, W14, 600, 650 USA made 19944), 504, (560 up to engine SN: 19080); NOTE: For late AC replacement pump Industrial: T340, T4, T5, 500 Crawler, (1521394 & 1539555) w/ a caged check 2404, 2424, 2444, 2504, some 3514 gas valve. The diaphram is peened onto the Replaces: 43481D, 55314D shaft. Governor, parts continue on next page
STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com 281 Governor, parts cont... Governor, parts cont... Part # USD Description / Application Part # USD Description / Application IHS4194 $15.99 NEW! Governor Thrust Bushing Sleeve IHS4207 $89.04 NEW! 11-pc. Governor Rockshaft Repair fits: A, B, C, Supers, 100, 130, 140, 200, Kit fits: A, B, C, Supers, 100, 130, 200, 230 230, 240, 330, 340, 404, 424, 444, 504 Replaces: 46943DA, 142485, 106958, Industrial: T340, T5, 500 Crawler, 2422, 43482D, 43483D, 45875D, 46939D, 45753D, 2444, some 3514 gas, Replaces: 363866R1 172531, 28078D USA made (0.940” O.D., 0.510” I.D., 1.090” length) NOTE: Includes IHS4179, IHS4187, (2) NOTE: Slides on to the IHS748. IHS4183, IHS4205, IHS4198, IHS3708, IHS4202 $5.49 NEW! Governor Shaft Bumper Spring IHS3712. fits: A, B, C, Supers, 100, 130, 140, 200, IHS4179 $64.95 NEW! Governor Rockshaft w/ Woodruff 230, 240, 330, 340, 404, 424, 444, 504; Key & Pin fits: A, B, C, Supers, 100, 130, Industrials: T340, T4, T5, 500 Crawler, 200, 230, Replaces: 46946D, 46943DA 2404, 2424, 2444, 2504, (3514 w/ C153) (0.373” O.D., 8.938” length) USA made Replaces: 49218DA (1.580” o/a length; IHS4187 $15.99 Bushing fits: A, B, C, Supers, 100, 130, 140, 0.267” O.D.) USA made NOTE: Slides 200, 230, 240, 330, 340, 404, 424, 444, 504; into IHS748 governor assembly. Industrials: T340, T4, T5, 500 Crawler, IHS2392 $8.95 Governor Spring fits: Cub, Cub LoBoy 2404, 2422, 2444, 2504, 3514 gas, LP (except 154, 184, 185) Replaces: 46939D (0.755” O.D., 0.375” Replaces: 251464R1, 121709C1 I.D., 0.438” length)Inc.® NOTE: Brass. (1.572” o/a length, 0.735” body O.D., IHS4183 $9.99 Governor Rockshaft Needle Bearing 0.100” wire dia.) USA made fits: A, B, C, Supers, Cub, Cub LoBoy, 100, IHS2400 $8.95 Governor Spring fits: 154, 184, 185, 240, 130, 140, 154, 184, 185, 200, 230, 240, 330, 330, 340, 504, 3514, T4, T5, T340 340, 404, 424, 444, 504; Industrial: T340, Replaces: 369686R2 (1.748” o/a length, T4, T5, 500 Crawler, 2404, 2424, 2444, Case IH
IH/Farmall 0.689” body O.D., 0.093” wire dia.) 2504, some 3514 gas, Replaces: 45753D USA made USA made NOTE: (1) used for Cub - 185, IHS884 $8.95 Governor Spring fits: A, Super A, B, 100, Parts,(2) used for all other models; 130, 404, Replaces: 46944DA Sold individually. (.085” wire dia., 2.088” o/a length, IHS4205 $2.79 Governor Rockshaft Plug fits: A, B, C, .560” dia.) USA made NOTE: Internal. Supers, 100, 130, 140, 200, 230, 240, 330, IHS3368 $9.95 Governor Spring fits: 140 340, T340, T5, 404, 424, 444, 500 Crawler, Replaces: 364113R1, 389987R1 504, 2424, 2444, some 3514 gas (1.957” o/a length, 0.077” wire dia., Replaces: 172531 USA made 0.552” dia.) USA made Engine parts IHS4198 $5.99 NEW! Governor Bumper Spring IHS985 $9.25 Governor Spring fits: C, Super C, 200, 230 fits: A, B, C, Supers, Cub, Cub LoBoy, 100, (All w/ C-123 engine SN up to 65000) 130, 140, 154, 184, 185, 200, 230, 240, 300, Replaces: 69235D (.085” wire dia., 1.960” o/a length, .560” dia.) USATractor made 330, 340, 350, 400, 404, 424, 444, 450, 504; NOTE: Internal. Industrials: T340, T4, T5, 500 Crawler, 2404, 2422, 2444, 2504 & some 3514 gas IHS878 $9.25 Internal Governor Spring fits: H, M series, Replaces: 28078D (0.885” o/a length, Supers, MTA; I, O, T, W4 - 9 series, 300, 0.250” O.D.) USA made 350, 400, 450 gas, LP, Replaces: 49407DBX, 357012R1 (2.700” o/a length, .110” wire IHS3708 $9.95 Governor Rockshaft Felt Seal & Retainer dia.) USA made NOTE: Internal. fits: A, B, C, Supers, 100, 130, 140, 200, 230, 240, 330, 340, T340, T5, 404, 424, 444, IHS3320 $14.50 Governor Spring fits: 454, 464, 544, 574, 500 Crawler, 504, 2424, 2444, some 3514 606, 656, 666, 674, 686, 706, 756, 766, 806, 826, 856, 2400A, 2500A, 3400A, 3500A, gas, LP, Replaces: 43482D (seal), 43483D Steiner3514, 3616, Hydro 70, Hydro 86 gas (retainer) (Felt: .375” I.D., .718” O.D., Replaces: 384588R1 (3.729” o/a length, .218” thick; Retainer: .752” O.D., .158” 0.100” wire dia., 0.697” body O.D.) thick) USA made IHS3712 $5.95 Governor Housing Gasket fits: A, B, C, IHS672 $29.95 Supers, 100, 130, 140, 200, 230, 240, 330, Governor Arm fits: A, B, C, Supers, 100, 340, T340, T5, 404, 424, 444, 500 Crawler, 130, 200, 230, Replaces: 6507DA 504, 2424, 2444, some 3514 gas, LP NOTE: Our cast steel governor arm is Replaces: 45875D USA made superior to the cast aluminum design NOTE: Mounts between the governor used by IHC. housing & the block.
282 STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm Governor, parts cont... Radiators, parts cont... Part # USD Description / Application Part # USD Description / Application ABC3969 $6.50 Governor Speed Change Lever Seal IHS188GK $9.75 fits: A, B, C, Supers, 100, 130, 140, 200, Mounting Gasket fits: Cub, Cub LoBoy 230, 240, 330, 340, 404, 424, 444, 504 gas, (1947-up except 154, 184, 185) LP, Replaces: 46949D (.500” I.D., .879” USA made O.D., .218” wide) NOTE: See website for all applications. IHS951 $14.95 Radiator Core Bolt Kit fits: Same as IHS3715 $39.75 Governor & Distributor Drive Bushing IHS188, Replaces: 179817, 280345 (bolt) fits: A, B, C, Supers, 100, 130, 140, 200, 103320, 80681 (washer) 230, 240, 330, 340, T340, T5, 404, 424, 444, NOTE: Stainless. Kit includes 18 bolts, 500 Crawler, 504, 2424, 2444, some 3514 18 washers. gas, LP, Replaces: 43439DBR (1.998” I.D., 2.131” O.D., 1.312” long) IHS018 $399.99 Lower Radiator / Steering Gear NOTE: Mounts in the right front side of Housing fits: Same as IHS188 engine block. May need to be sized after Replaces: 350886R11 NOTE: For gaskets installation. use IHS1526 & IHS188GK. Includes IHS247 $32.30 the steering worm shaft bushing and Governor Throttle Rod (To Carburetor) the steering sector bushing. Both are fits: M - 450 gas, LP, Replaces: 49788DXA installed. Inc.® USA made IHS2656 $335.00 IH/Farmall IHS2559 $40.75 IH/Farmall
Governor Throttle Shaft Rebuild Kit Case IH Radiator fits: 154, 184, 185 fits: H, M, Supers, MTA, I, O, T, W4, W6 Replaces: 404547R1, R2, R3 series, Supers, 300, 350, 400, 450 gas, LP NOTE: Copper core. For cap order NOTE: See website for contents & ABC1398. complete applications. Engine / Cooling parts IHS890Parts,$489.99 Radiators, parts Radiator (For Non-Pressurized System) Part # USD Description / Application fits: A, AV SN: 41330 & up, Super A up to SN: 336710, B, BN SN: 40193 & up IHS249 $249.99 Radiator Core fits: F12, F14, I12, I14, Replaces: 58124D NOTE: For cap order O12, O14, W12, W14 IHS337. Replaces: 27065D (H = 19-1/2”, W = 17-1/2”, D = 2”) IHS445 $373.95 USA made Radiator (For Pressurized system) fits: Late Super A SN: 336711 & up IHS816 $25.99 Replaces: 358104R93 Mounting Gasket TractorPair fits: Same as (Core dimensions: H = 16-1/8”, W IHS249, Replaces: 23802D USA made = 16”, D = 2-1/8”) NOTE: Radiator neck on outside. Has 2” dia. on upper & lower hose outlets. For cap order IHS255 $359.99 Radiator Core fits: Regular, F20, T20, IHS384 or IHS1993. 10-20, Replaces: 20339D (20-1/2” Core Height, 20” Core Width, IHS441 $449.99 2-7/8” Core Depth) NOTE: Check Radiator (For Pressurized system) dimensions before ordering. Fits: H, Super H, (I4, O4, OS4, W4, Supers, but NO provisions for light IHS805 $31.50 Mounting Gasket Pair fits: Same as mounts), Replaces: 352628R92 SteinerIHS255; Also Fits some F30, W30 (Core dimensions: H = 18”, W = 16- Replaces: 10646D 1/4”, D = 3-1/8”) NOTE: For cap order USA made IHS384 or IHS1993. IHS188 $219.95 Radiator w/ IHS188GK Gasket IHS4478 $9.99 NEW! Radiator Drain Pipe fits: H, Super (For Pressurized & Non-Pressurized H, F300, I300, F350, I350, Replaces: 221- Systems w/ bolt on lower tank) 170 (3/8” NPT (both ends), 5” long) Fits: Cub, Cub LoBoy (1947 & up except USA made 154, 184, 185), Replaces: 351878R93 NOTE: For cap order IHS301. Radiators, parts continue on next page
STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com 283 Radiators, parts cont... Radiators, parts cont... Part # USD Description / Application Part # USD Description / Application IHS449 $689.99 IHS3129 $629.99 Radiator fits: 806, 856, 1026, 1206, 1256, Radiator (For Pressurized system) 1456 gas, LP, diesel; 826 gas, LP only Fits: M, MTA, Supers, I, O, W6 series Replaces: 383950R91, 386860R91, Replaces: 357158R92 (Core dimensions: 391931R91, 530281R1 H = 27-1/4”, W = 20”, D = 4”) (Overall dimensions: 30” x 21-3/8”, NOTE: For cap order IHS384 or Core dimensions: 23” x 18-3/4” x IHS1993. 3-1/4”, Inlet: 2”, Outlet: 2”) IHS4475 $9.99 NEW! Radiator Drain Pipe IHS3123 $699.99 Radiator fits: 766 diesel, (886 w/ D360 fits: M, M, MTA, Supers, O4, 340 gas engine), 966, 986, 1066, 1086, 1466, 1486, Replaces: 190699 (3/8” NPT (both 1566, 1586, Hydro 100, Hydro 186 ends), 6” long) USA made Replaces: 121725C1 (Overall dimensions: 30” x 23-3/8”, IHS443 $411.75 Radiator (For Pressurized system) Core dimensions: 24” x 22-1/2” x fits: Super C, 100, 130, 200, 230 3-7/8”, Inlet: 2”, Outlet: 2-1/2”) Replaces: 356356R96, 358421R93 (Core dimensions: H = 16-1/8”, W = IHS925 $11.29 Winged Radiator Drain Cap fits: A - 650 16”, D = 2-3/4”) NOTE: Has 2-3/8” gas, diesel, Replaces: 13047DA dia. on upper hose outlet & 2” dia. (3/8” pipe thread)Inc.® USA made on lower hose outlet. For cap order NOTE: Has stamped “IH”. Cast iron. IHS723 or ABC008. IHS922 $11.99 Winged Water Block Drain Plug fits: A - IHS583 $599.95 650 gas, diesel; Serviceable for Cub, Cub LoBoy, Replaces: 45314DC Radiator fits: 140 SN: 13968 & up (3/8” pipe thread) USA made Replaces: 369400R94 (H = 16-1/8”) Case IH NOTE: Has stamped “IH” and part
IH/Farmall NOTE: Will fit early serial numbers by number. Cast iron w/ zinc plating. purchasing IHS723 cap. ABC209 $3.99 Radiator Drain Plug fits: 404 - 7488 Parts,Replaces: 534184R1 (1/4”-18 NPT) USA made NOTE: See website for full IHS442 $599.95 applications. Radiator fits: 300, 350 Row-Crop gas, diesel, Replaces: 361704R93 NOTE: Will not fit Utilities. For cap Radiator mud guards - USA made order IHS384, IHS1993. Part # USD Application
Cooling parts IHS628 $68.50 Fits: H, Early Super H w/ battery box IHS989 $7.99 Radiator Hold Down Spring fits: H, M, under fuel tank, Replaces: 48689DD W4, W6 & Supers, 300,Tractor 350, 400, 424, 450 USA made NOTE: 2 used per tractor; IHS632 $68.50 Sold individually. Fits: Late Super H w/ battery under seat, IHS4171 $14.95 F-350 diesel, Replaces: 360479R1 8-pc. Radiator Stud Mounting Kit fits: H, M, W4, W6, Supers, F300, F350, F400, F450 USA made IHS629 $68.50 Fits: M, Super M gas, Replaces: 49052DD MIS1123 $1.95 Slotted Hex Nut fits: Same as IHS441, NOTE: Does not fit diesel models (MD). IHS442, IHS449 (7/16”-20 NF, Grade 5) SteinerNOTE: 2 used per tractor; Sold IHS630 $68.50 individually. Fits: Super MTA, 400, 450 gas IHS3139 $609.99 Replaces: 360511R1 NOTE: Does not fit Radiator fits: F656 gas, 706 gas, LP, diesel models (MTAD, 400D, 450D) F706 up to SN: 37236 diesel, I706 up to SN: 5273 diesel, 756 gas, LP, Replaces: IHS631 $68.50 378713R92 (Overall dimensions: 26-1/2” Radiator Mud Guard fits: F300, F350 gas x 21-1/4”, Core dimensions: 20-1/2” x Replaces: 360649R1 19-3/4” x 3-1/4”, Inlet: 2”, Outlet: 2”)
284 STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm Radiator mounting pads Radiator caps w/ gaskets cont... Part # USD Application Part # USD Description / Application IHS536 $2.15 ABC1396 $9.99 Radiator Cap w/ Gasket (For (7 PSI) Fits: A - 884, Replaces: 18464D, 47240D Pressurized systems) (For radiators w/ 1” (1-1/2” O.D.) NOTE: Sold individually. tall filler neck) fits: IH Cub SN: 248125 & up (1975-79) w/ radiator 352903R92; Will IHS821 $13.99 Fits: 460, 560, 660 Standard, Row-Crop also fit older Cubs when a pressurized gas, diesel, Replaces: 369932R1 system is desired; Will not fit 154, 184, 185 NOTE: 4 used per tractor; Replaces: 365892R91, D61885 Sold individually. Underside view (1.500” radiator neck I.D., 2.330” O.D., IHS725 $19.50 Fits: 544, 656, 664, 656, 706, 756, 766, 786, 2.000” tang to tang) 806, 826, 856, 886, 966, 986, 1026, 1066, IHS384 $15.99 1086, 1206, 1256, 1456, 1466, 1468, 1486, Radiator Cap w/ Wing (For (4 PSI) 1566, 1586, 4100, 4166, 4186, Industrials Pressurized System) fits: Super A, C, Super Hydros: 70, 86, 100, 186 NOTE: 4 used per C, H, Super H, M, MD, Super M, Super tractor; Sold individually. MD, I, O, W 4, 6, 9 series, Supers gas, ABC455 $3.29 diesel, Replaces: 67448DD, 356710R91, Fits: IH / Farmall models 358105R91 (2.050” radiator neck I.D.) (2” x 2”, 1/4” thick) NOTE: 2 used per NOTE: Like original. Measure radiator tractor; Sold individually. Underside view neck I.D. beforeInc.® ordering. Fits on outside of neck. IH/Farmall IH/Farmall
IHS1993 $13.99 Case IH Radiator Cap w/ Gasket (For (7 PSI) Radiator caps w/ gaskets Pressurized system) fits: B-450, (H, Super Part # USD Description / Application H both w/ low radiator neck), 100, 130, (140 up to SN: 13967), 200, 230, 330, 400, IHS1953 $8.95 Engine Block Inspection Cover Gasket 450, 600, 650; IH Utility: 300, 350; Farmall
fits: F20 - W30, 10-20 - 22-36 Cooling parts Row-Crop: 300, 350; Wheatland: 400, 450 Replaces: 7102-1/8T, 7102T Underside view Parts,Replaces: 361705R91, 362323R91 (6-1/2” O.D., 5-1/4” I.D., 0.575” wide, (2.050” radiator neck I.D.) 0.064” thick) USA made NOTE: 2 used per engine; Sold individually. NOTE: IHS384 & IHS1993 radiator caps will fit IHS441, IHS445, IHS337 $10.95 Radiator Cap w/ Gasket IHS449 radiators. Will not fit IHS443. (For Non-Pressurized system) fits: A, B, IHS731 $18.99 Radiator Cap (7 PSI) fits: 100, 130, (140 up C, Super A, Early H, M, I4, I6, I9, O4, O6, to SN: 13967), 200, 230, 240, 330, 340, 460, (Early T6, T9), W4, W6, W9 560, 600, 650, 660, Replaces: 361705R91, Replaces: 43983D (2.886” O.D., 0.398” tang 362323R91, 370871R91 (2.050” radiator width, 1.845” inside center dia.) neck I.D.) NOTE: Exactly like original. Underside view NOTE: Fits on inside of neck. Check I.D. Measure radiator neck I.D. before before ordering. Tractor Underside view ordering. Does not fit IHS443. IHS239 $2.45 Gasket only (For IHS337) NOTE: NBR. IHS301 $10.99 IHS723 $18.99 Radiator Cap (7 PSI) w/ Gasket fits: 140 SN: 13968 & up, 240, 340, 404, 424, 444, 454, Radiator Cap w/ Gasket 464, 484, 504, 544, 574, 584, 606, 656, 664, (For Non-Pressurized System) fits: Cub 666, 674, 684, 686, 706, 756, 784, 806, 826, up to SN: 248124, Replaces: 351030R91, 856, 884, 1026, 1206, 1256, 1456; Hydros: 400586R1 NOTE: Like original. 70, 84, 86, Replaces: 393229R91, 402281R1, Underside view Underside view 532029R1 (1.5” radiator neck I.D.) NOTE: Exactly like original. Measure ABC1398Steiner$6.99 Radiator Cap w/ Gasket (For (7 PSI) radiator neck I.D. before ordering. Pressurized systems fits: Cub SN: 248125 IHS775 $14.99 & up (1975-79); Also fits older Cubs when Radiator Cap w/ Cover (For (10 PSI) pressurized system is desired; Will fit 154, Pressurized System) fits: 484, 584, 684, 766, 184, 185, but to use original cover must 784, 786, 884, H84, 886, 966, 986, 1066, 1086, drill 2 holes in wings of cap to mount cap 1466, 1468, 1486, 1566, 1568, 1586; Hydros: to cover, Replaces: 80889R91, 404548R1, 100, 186, Replaces: 121951C1, 532672R91, Underside view 404684R1 (2.330” O.D., 2.000” tang to tang, Underside view 532673R1, 532674R1, 1500626C92 1.096” tall) NOTE: For radiators w/ 3/4” NOTE: Exactly like original. tall filler neck.
STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com 285 Straight radiator hoses Radiator pipe, hoses cont... NOTE: Not suitable for gas or oil. Must cut Part # USD Description / Application to length. IHS4510 $13.99 NEW! Radiator Hose (Upper) fits: 444, Part # USD Specifications 2444 both gas w/ Blackstone radiator only ABC4286 $41.99 (1-1/4” I.D., 1-3/4” O.D., 3’ long) Replaces: 405111R1 (2-1/2” I.D. large end, ABC3973 $24.99 (1-1/2” I.D., 1-7/8” O.D., 3’ long) 2-1/4” I.D. small end) ABC3977 $24.99 (1-3/4” I.D., 2-1/8” O.D., 3’ long) IHS4495 $15.99 NEW! Radiator Hose (Lower) fits the following w/ gas engines: F460, 560, 656, ABC3983 $24.99 (1-7/8” I.D., 2-1/4” O.D., 3’ long) 660, F706 up to SN 37236, I706 & 2706 up ABC3991 $26.95 (2” I.D., 2-3/8” O.D., 3’ long) to SN 5273, Replaces: 369922R1 (2” I.D.) ABC3995 $36.50 (2-1/8” I.D., 2-1/2” O.D., 3’ long) IHS4578 $19.99 NEW! Radiator Hose (Upper) fits: F656, ABC3999 $36.50 (2-1/4” I.D., 2-5/8” O.D., 3’ long) F706 up to SN: 37236, I706 & 2706 both up to SN: 5273, Replaces: 379237R2 ABC4003 $44.95 (2-3/8” I.D., 2-3/4” O.D., 3’ long) (1-7/8” I.D. both ends) ABC4007 $51.99 (2-7/8” I.D., 3-1/4” O.D., 3’ long) ABC4471 $7.99 NEW! Bypass Hose, water pump to oil ABC4012 $49.95 (3” I.D., 3-3/8” O.D., 3’ long) cooler fits: 806 diesel, 1206; Industrials: 2806 diesel, 21206, Replaces: 407006R1 (1-3/4” I.D., 4-1/4” long) Radiator pipe, hoses ABC4480 $13.99 NEW! Radiator HoseInc.® (Upper) fits: 574, Part # USD Description / Application 674, 684, 685, 784, 884, 885, 995; Industrial: 584; Case IH 595, 695, Replaces: 402207R1 IHS684 $29.99 Lower Radiator Water Pipe fits: H, I4, O4, (2” I.D. x 1-1/2” I.D.) W4, Super H, Super W4 ABC4498 $13.99 NEW! Radiator Hose (Lower) Replaces: 48828D, 353852R1 fits: 574, 584, 674, 684, 685, 784, 884, 885; Case IH Case IH 595, 695, 995, Replaces: 402205R1 IH/Farmall FDS261 $5.59 Radiator Hose (Upper / Lower) fits: A, AV, B, BN, Super A up to SN: 355669, (1-1/2” I.D.) (Super A SN: 356601 & up fits as lower ABC4522 Parts,$13.99 NEW! Radiator Hose (Upper) hose only), Replaces: 20075DB fits: Case IH 3230, 4210, 4230 (All up to (2” I.D., 2-1/4” long) SN: JJE0910719); 585, 595, 685, 695, 885 IHS184 $12.99 Radiator Hose Kit fits: H, Super H, I4, O4, (All w/ AC), Replaces: 84496C1 W4 ((2) - 1-1/2” I.D. x 2-1/2” long, 1-7/8” (1-3/4” I.D.) NOTE: Does not fit O.D., (1) - 1-1/4” I.D. x 2-5/16” long, International. Fits Case IH only. 1-9/16” O.D., (1) - 1-3/4” I.D. x 3-1/2” IHS4483 $19.99 NEW! Radiator Hose (Lower) fits: 686, long, 2-1/8” O.D.) NOTE: For clamps 706, 756, 826; Industrials: 2706, 2756, 2826
Cooling parts order (2) IHS639, (4) IHS638, (2) IHS637. Replaces: 396355R1 (2” I.D.) IHS4446 $15.99 NEW! Radiator Hose (Lower) fits: Farmall IHS4489 $13.99 NEW! Radiator Hose (Upper) fits: 706 300 & 350 gas only, Replaces:Tractor 362833R1 (Farmall, diesel SN 37237 & up, (1.500” I.D.) International, diesel SN 5274 & up) , 756 (diesel); Ind: 2706 diesel SN 5274 & up, IHS130 $16.99 Radiator Hose Kit fits: M, MV, Early Super 2756 (diesel), Replaces: 396354R1 (2” I.D.) M w/ 3-1/2” long top hose, W6, MD, Super MD, I6, O6; The following diesel IHS4504 $27.99 NEW! Radiator Hose (Upper) fits: 766 only: MTA, 400, 450, W400, W450 diesel, 886 w/ D360 engine ((1) - 1-1/2” I.D. x 2-1/2” long, 1-7/8” Replaces: 66003C1 (2-1/2” I.D. (large end), O.D., (2) - 2” I.D. x 2-11/16” long, 2-1/4” 2” I.D. (small end)) O.D., (1) - 2-1/8” I.D. x 4” long, 2-9/16” IHS4513 $16.99 NEW! Radiator Hose (Upper) fits: 786, 886 O.D.) NOTE: For clamps order (2) w/ D358 engine, Replaces: 104595C1 IHS638, (4) IHS640, (2) IHS641. Steiner (2” I.D.) FDS261 $5.59 Radiator Hose (Lower) fits: 140, 240, 404, IHS4474 $17.99 NEW! Radiator Hose (Lower) 424 gas, 444 gas, Replaces: 20075DB fits diesels: 806, 856, 1026, 1206, 1256, 1456 (2” I.D., 2-1/4” long) Replaces: 380448R2 (2-1/4” I.D. large end, 2” I.D. small end) IHS251 $14.79 Radiator Hose (Upper) fits: 140, 240, 404, 424 gas, (444 gas using 388458R91 IHS4492 $13.99 NEW! Radiator Hose (Upper) fits: 826; radiator), Replaces: 369397R1 2826 Industrial, Replaces: 405964R1 (2.340” I.D. (radiator end), 2.600” I.D. (2” I.D.) (thermostat housing end))
286 STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm Radiator pipe, hoses cont... Worm drive hose clamps - USA made Part # USD Description / Application cont... IHS4516 $17.99 NEW! Radiator Hose (Upper) fits: 886 Part # USD Specifications w/ D358, 966, 986, 1066, 1086, 1466, ABC4147 $7.99 (7/16” - 1” range, 5/16” band width) 1486, 1566, 1586, Hydro 100, Hydro 186, ABC4151 $9.59 (1/2” - 1-1/16” range, 1/2” band width) Replaces: 532680R1 (2-1/8” I.D. large end x 1-7/8” I.D. small end) ABC4155 $9.59 (1/2” - 1-1/4” range, 1/2” band width) ABC4158 $9.99 (11/16” - 1-1/2” range, 1/2” band width) IHS4486 $7.99 NEW! Radiator Hose (Lower) fits: 966, 986, 1066, 1086, 1466, 1486, 1566, 1586, ABC4161 $10.95 (3/4” - 1-3/4” range, 1/2” band width) Hydro 100, Hydro 186, Replaces: 532681R1 ABC4165 $10.99 (1” - 2” range, 1/2” band width) (2-1/2” I.D.) ABC4180 $13.99 (1” - 3” range, 1/2” band width) IHS4477 $6.99 NEW! Thermostat Bypass Hose ABC4169 $10.99 (1-1/4” - 2-1/4” range, 1/2” band width) fits: 384, 424, 444, 2424, B414, BD-154 ABC4172 $11.99 (1-1/2” - 2-1/2” range, 1/2” band width) Replaces: 3065127R1 (23/50” I.D.) ABC4176 $11.99 (1-3/4” - 2-3/4” range, 1/2” band width) IHS4519 $12.50 ABC4184 $13.99 (2-1/4” - 3-1/4” range, 1/2” band width) (Upper) NEW! Radiator Hose fits: B275 ABC4188 $14.99 (2-1/2” - 3-1/2” range, 1/2” band width) IHS4519: Replaces: 704289R2 ABC4204 $17.95 (2-1/2” - 4-1/2” range, 1/2” band width) (2-1/2” I.D. large end, 1-1/2” I.D. small Inc.® ABC4192 $15.99 (2-3/4” - 3-3/4” range, 1/2” band width) end) IH/Farmall IHS4501 $10.99 ABC4196 $15.99 (3” - 4” range, 1/2” band width) IH/Farmall (Lower) IHS4501: Replaces: 704287R2 ABC4200 $15.99 (3-1/4” - 4-1/4” range, 1/2” band width) Case IH (1-3/8” I.D.) ABC4206 $99.99 (130-pc. assortment; Display rack: 5/16” - 2-3/4” range) NOTE: Includes 20 each: ABC4133, ABC4142, ABC4155, ABC4161, ABC4169, ABC4176 & 10 each: ABC4151. Cooling parts Wittek© tower (hose) clamps Parts, USA made Fits: IH / Farmall models Thermostats, gaskets Original Style Part # USD Description / Application Part # USD Dimension ABC052 $11.99 Thermostat w/ Gasket fits: Super A, Super IHS636 $4.99 (.775” - 1.013” size range) C, 100, 130, 140, 200, 230, 240, 330, 340, 404, 504, gas, B250, B275, B414, 424, 444, IHS637 $5.49 Replaces: 39135H 354, 374, 384, 3414, 3444 gas, diesel (1.687” - 1.780” size range) (160 degree Lo-Temp) NOTE: Gasket is IHS638 $5.99 Replaces: 55624D for Ford models only. May also need to (1.815” - 2.001” size range)Tractor order 690798C1 spacer ring (not available IHS639 $5.99 Replaces: 45445D from STP). (1.975” - 2.285” size range) IHS913 $37.95 Thermostat fits: H, M, MD, Supers, MTA, IHS640 $4.99 Replaces: 91406HA I, O, T, W4, 6, 9 series, Supers, 300, 350 gas, (2.175” - 2.500” size range) LP only, 400, 450, W400, W450, 460 diesel, 560 diesel, 600, 650 gas, LP, diesel, 656 IHS641 $6.15 (2.400” - 2.625” size range) diesel, 660 diesel, 706 diesel (w/D282) IHS642 $6.05 Replaces: 45813D Replaces: 33814DA, 37634DA, 261514R92, (2.350” to 2.765” size range) 313942R92, 317668R91 (160 degree Temp) IHS643 $6.25 (2.685” to 2.995” size range) NOTE: Pointed end goes down. Gasket not available from STP, Inc. Steiner IHS1464 $5.49 Thermostat Gasket only fits: H, Super H, Worm drive hose clamps - O4, OS4, W4, 300, 350 USA made Replaces: 45102D, 45102DA USA made NOTE: Premium stainless steel. IHS1466 $5.45 Thermostat Gasket only fits: M, MD, O6 Sold in packs of 10. series, W9 series & Supers, 400, 450, 600, Part # USD Specifications 650 gas, LP, diesel, Replaces: 45984D, ABC4133 $6.99 (5/16” - 5/8” range, 5/16” band width) 45984DA USA made ABC4142 $7.59 (3/8” - 7/8” range, 5/16” band width) Thermostats, gaskets continue on next page
STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com 287 Thermostats, gaskets cont... Fan belts cont... Part # USD Description / Application Part # USD Application ABC1086 $12.99 Thermostat fits: 460, 560, 656, 660, 686, 706, ABC102 $13.95 Fits: A, B, C w/ water pump; Super A1, 756, 806, 826, 856, 3616 gas Super C, 100, 130, 200, 230 w/ C-123 Replaces: 108120R91 (180 degree Temp, engine, Replaces: 60712D 2-1/2” O.D.) USA made NOTE: Gasket (11/16” x 34-1/4”) not available from STP, Inc. IHS233 $15.99 Fits: H, Super H, I4, O4, W4, 300, 350 gas Replaces: 48032DA (11/16” x 37-1/2”) IHS134 $17.99 Fits: M, Super M, MTA, I6, O6, T6, W6 Fan shroud gas, diesel, 400, 450, Replaces: 16131DA Fits: Cub, Cub LoBoy (13/16” wide x 45-1/4” long) Replaces: 351037R2 ABC191 $10.50 Fits: 350 diesel & air conditioning belt for some 3488 - 7488 w/ 42” belt Description Part # USD Replaces: 366781R1, 1250587C1 (A.C.) Fan Shroud...... IHS621...... $87.50 (33/64” x 40-3/4”) ABC009 $12.99 Fits: 424, 444, 2444 (All w/ BD154” diesel engine), Replaces: 237153R1 Fan assemblies (5/8” x 36-1/2”) Part # USD Description / Application ABC1648 $15.99 Fits: Case IH STX275,Inc.® STX325, JX80U, IHS143 $76.95 Fan Assembly fits: Cub up to SN: 165152 JX90U, JX100U, MX240, 9170, 9180, Replaces: 131489C1, 251427R91, 9270, 9280, 9370, 9380, other various 251645R91 (12-1/4” dia. fan blade & applications, Replaces: A189040, 3-1/2” pulley O.D.) NOTE: Will also AV10X1175, 3030103; F460 gas, LP (fan/ fit Cub LoBoy w/ purchase of ABC099 gen); F460 diesel (fan); I460 gas, LP (fan); Case IH generator belt. Has improved sealed F560 gas, LP, diesel (fan); 606 gas, LP IH/Farmall bearing. No need to grease! (fan/gen); F656 up to SN: 23107 gas (fan); 706 gas, LP, diesel w/ 46-1/4” belt (gen/ IHS142 $79.95 Fan Assembly fits the following w/out Parts,water pump); 806 gas, LP (fan) water pump: A, AV, B, BN, C, Super A, Replaces: 149635R1, 403348R1, 332562R1 (F12, F14 but will not look like original) (17/32” wide x 45-1/4” long) USA made Replaces: 70136D, 70212D (Overall dia. = 15-1/2” tip to tip, Fan pulley dia. = 4”, Generator pulley dia. = 3-5/8) NOTE: Has improved sealed Water jacket covers, parts bearing. No need to grease! Part # USD Description / Application
Cooling parts IHS2081 $165.99 Fan Drive Pulley Assembly fits: Cub, Cub IHS209 $39.99 LoBoy tractor SN: 165153 & up using cast (Cover) iron pulleys w/ sealed bearing & spindle shaft; Fits the following Tractorwhen using a Water Jacket Cover or Gasket fits: H, water pump: Some Super A, Super C, 100, Super H, I4, O4, W4, 300, 350 gas 130, 200, 230; Will also fit A, B, C when IHS209 Replaces: 48461DA updated w/ a water pump IHS209GK $6.99 IHS209GK Replaces: 45266DA Replaces: 131486C91 (3.125” c.c fan bolt (Gasket) USA made pattern, 12-24 UNC (fan screws), 4.379” O.D. rear pulley, 4.062” O.D. front pulley) NOTE: Measure fan blade bolt c.c. before ordering. IHS210 $39.99 Steiner (Cover) Fan belts Water Jacket Cover or Gasket fits: M, NOTE: Verify belt size before ordering. Super M, MTA, I6, O6, T6, W6, 400, 450 gas Part # USD Application IHS210GK $6.99 IHS210 Replaces: 46125DA ABC098 $12.99 Fits: Cub, Cub LoBoy w/ C-60 engine (Gasket) IHS210GK Replaces: 46128DA Replaces: 251428R1 (11/16” x 30-1/4”) USA made ABC101 $12.99 Fits: A, Super A, B, C w/ C-113 engine (All w/out water pumps) Replaces: 46869D (11/16” x 32-1/4)
288 STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm Water pumps w/ gaskets Water pumps w/ gaskets cont... Part # USD Description / Application Part # USD Description / Application IHS217 $125.99 IHS218 $105.50 Water Pump w/ Gasket & w/out Pulley fits: 340 diesel; 460 gas, LP, Water Pump w/ Gasket & Pulley diesel; 504 diesel; 560 gas, LP, diesel; fits: A, B, BN, C, Supers, 100, 130, 200, 606 gas, LP, diesel; 656 gas, LP, diesel; 230, Replaces: 355760R93 660 gas, LP, diesel; 666 gas; 706 gas, LP, diesel; 756 gas, LP; 766 gas; 806 gas, LP; 826 gas, LP; 856 gas, LP; Hydro IHS183 $239.99 70 gas; Hydro 86 gas; Industrial: 3514 Water Pump w/ Gasket, Fan & diesel, 3616 gas, diesel; T6-62 series Generator Pulley fits: H, I4, O4, W4, 6 -cyl. gas; TD-6 62 series 6-cyl diesel Supers, Replaces: 54148DA D282; TD-9 & TD9B 92 series 6-cyl. NOTE: Design incorporates a diesel; H25, 30, 50 diesels; 3800 gas; unitized seal. Exterior looks like 3850 gas, Replaces: 601816C92 original, but the inside is redesigned. IHS2789 $162.95 Water Pump w/ Gasket, O-Ring & Fan IHS4444 $339.95 Hub fits: 806, 856, 1026, 1206, 1256, 1456 & others using D361 - DT407 NEW! Water Pump w/ Gasket diesel engines. Replaces: 701335C92 fits: Farmall 300 & 350 gas only (1” shaft, replacesInc.® original 7/8” shaft) Replaces: 364852R92 NOTE: See website for full IH/Farmall applications. IH/Farmall Case IH IHS759 $109.95 Water Pump w/ Gasket & w/out Pulley fits: 766, 966, 986, 1066, 1086, IHS189 $246.99 Water Pump w/ Gasket, Fan & 1466, 1486, 1566, 1586, 4166, 4186, 3388, Generator Pulley fits: M, I6, O6, 3488, 3788, 4366, 5088, 5288, 5488, 6388, W6, Supers, 400, 450 gas, diesel 6588, 6788, Hydro 186 (All w/ DT414,
Replaces: 353729R92 NOTE: Design Cooling parts DT436, DT466 engines) incorporates a unitized seal. Exterior Parts,Replaces: 672644C95, 673162C93 looks like the original, but the inside is redesigned. IHS2444 $74.95 Water Pump w/ Gasket & Adjustable Pulley fits: B250, B275, B276, B414, 354, IHS898 $98.50 364, 384, 434, 2300A, 3414 gas, diesel; Water Pump w/ Gasket & w/out TD5, 238, 274, 424, 444, 2444, 3444 Pulley fits: 140, 240, 330, 340, 404, 424, diesel (All w/ BC144, BD144, BD154 444, 2404, 2424, 2444, T4, T5, 500 gas, engines & w/ adjustable pulley) LP, Replaces: 367683R91, 375793R92 Replaces: 703820R97 IHS2444GK $4.49 Water Pump to Block Mounting Gasket fits: Same as IHS2444 & more IHS4554 $2.49 NEW! Water PumpTractor Gasket only Replaces: 703816R4 USA made fits: 140, 240, 330, 340, 404, 424, 444, NOTE: See website for full 2404, 2424, 2444, T4, T5, 500 gas, LP applications. Replaces: 375745R2 USA made IHS2573 $79.99 Water Pump w/ Gasket & Hub fits the following diesels: H84, 385, ABC4137 $119.99 395, 454, 464, 484, 495, 574, 584, 585, 595, 674, 684, 685, 784, 785, 884, 885XL, Water Pump w/ Gasket & 3210, 3220, 4210 (All w/ D155, D179, w/out pulley fits: 284 gas D206, D239, D246, D268 engines) Replaces: 1014309C93 Replaces: 3132677R1, 3136053R93 Steiner (4 bolt fan hub) NOTE: See website for full applications & part numbers.
IHS2793 $184.50 KUB4129 $72.95 Water Pump w/ Gasket fits: 504, 2504, 3514 w/ C-153 C.I. gas engines Water Pump w/ Gasket & w/out Replaces: 375741R1, 375742R92 pulley fits Case IH Skid Steer: 1838 NOTE: Does not include backing w/ V2203 Kubota engine, Replaces: plate or fan pulley hub. Hub is 332451A1 available by special order if needed.
STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com 289 Water pump pulley flanges, parts Ammeters w/ stainless steel bezel Part # USD Description / Application For 2" diameter hole. Gauges have a glass lens. ABC gauges vary from original appearance. Works on 6-volt or 12-volt. IHS033 $31.50 Water Pump Pulley Flange Part # USD Description / Application (1/2 Adjustable Nut) fits: (H, HV SN: IHS527 $26.95 57532 & up) & Supers, I, O, W4 series (SN: 1421 & up), 300, 350 gas; (20-0-20) fits following w/ cut out Replaces: 6598DX, 362250R11 system: A, B, H, M, I, O, W-4, 6, 9 series (5-1/4” dia.) NOTE: 2 different dia. (1939-46), Replaces: 42383DC USA made were made, measure before ordering. NOTE: Has IHC logo. Will NOT fit early tractors with 5” O.D. pulley (6598D). IHS418 $26.95 IHS921 $6.29 (20-0-20) fits following w/ cut out Water Pump Pulley Drive Stud system: A, B, C, Cub, H, M, I, O, T, W-4, 6, fits: H & Supers, I, O, W4 series, 300, 350 9 series (1947-50), Replaces: 354473R91 gas, Replaces: 48029DA (5/16” thread USA made NOTE: Has IH logo. Also fits 1.880” long) USA made most Cub Cadets. NOTE: Silver zinc. 2 used per tractor; IHS395 $26.95 Sold individually. (30-0-30) fits following w/ voltage regulator system: Inc.®Cub, H, M, Supers, IHS034 $31.50 Super A, Super C, MTA, 100 - 660 gas, LP, Water Pump Pulley Flange diesel, Replaces: 360053R91, 378424R91, (1/2 Adjustable Nut) fits: F-30, 15-30 SN: 393334R1 NOTE: Has IH logo. Correct TG154508MB & up, W30, W-40, WD-40, for mid 1950-up. See website for full T20 SN: FM556 & up, M & Supers, I, O, T, applications. W6 series 400, 450 gas, diesel Case IH
IH/Farmall Replaces: 2370D, 2370DBX IHS1837 $27.95 (6-1/4” dia; 3.790 I.D.) Ammeter (60-0-60) (For tractors Parts,converted to a 12-volt system) IHS924 $6.75 fits: IH / Farmall modelsUSA made Water Pump Pulley Drive Stud fits: M, NOTE: Has IH logo. MD series & Supers, I, O, T, W6 - W450, 600, 650 gas, diesel, Replaces: 20301D (5/16” thread, 2.571” long) USA made IHS787 $25.50 NOTE: Silver zinc. 2 used per tractor; Charge indicator gauge fits: 766, 966, Sold individually. 1066, 1466, 1468, 1566, 1568, 4366, 4386, Hydro 100, Replaces: 533990R1, Cooling parts / Gauges IHS1554 $41.50 1341322C1, 84203117 Water Pump Packing GlandTractor Nut fits: M, Supers, I, O, T, W6, 9, 400, 450 gas, LP, ABC016 $13.99 diesel, Replaces: 20296D USA made NOTE: Brass. (20-0-20) fits: A, B, C, Cub, H, M, Supers, MTA NOTE: No logo.
IHS3084 $10.79
Rear Water Pump Seal fits: M - 650 ABC109 $13.99 Replaces: 20290D, 3108650R91 (1.875” I.D., 2.875” O.D., 0.313” wide) (30-0-30) fits: A, B, C, Cub, H, M, Supers, SteinerNOTE: See website for full applications. MTA, Replaces: 360053R91, 378424R91, 393334R1 NOTE: No logo
IHS1444 $26.96 Water Pump Pulley Flange (1/2 Adjustable Nut) fits: B250, B275, ABC466 $14.95 B276, B414, 238, 274, 354, 364, 384, 424, 434, 444, 2300A, 2424, 3414, 3444, 7000 (60-0-60) fits: A - 660 w/ Alternator Forklift, TD5 (All w/ BC-144, BC-144, BD- systems NOTE: No logo. 154 engines), Replaces: 703825R11 (4.975” O.D., 2.900” I.D.)
290 STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm Glow plug meter Oil pressure gauges w/ stainless steel Fits the following diesels: 340, 460, 504, bezel, parts cont... 560, 606, 656, 660, 706 Part # USD Description / Application Replaces: 370380R91, R92, 378352R91, IHS530 $41.99 404740R1 (0-75 PSI) fits: A, B, C, Supers (1947-54) Description Part # USD Replaces: 43987DB Glow Plug Meter...... IHS1538...... $42.50 (1/8” NPT male thread) NOTE: Has IH logo. NOTE: Engine mounted. Has IH logo.
IHS458 $41.99 Dash warning light, parts (0-45 PSI) fits: Early Cub (up to 1954) Replaces: 31041DB Part # USD Description / Application (1/8” NPT male thread) ABC3972 $25.99 12-volt Dash Warning Light w/ Flat NOTE: Engine mounted. Has IH logo. Red Lens (For low oil, A.C., brake, transmission temperature / pressure, IHS771 $41.99 E.G.R indicator) fits: 184, 666, 686, 756, (0-45 PSI) fits: Cub (1955 & up), Cub 766, 786, 826, 856, 886, 966, 986, 1026, Loboy, 154, 184, 185, Replaces: 364663R92 1066, 1086, 1206, 1256, 1456, 1466, 1468, (1/8” NPT male thread) 1486, 1566, 1568, 1586, 3088, 3288, 3488, NOTE: EngineInc.® mounted. Has IH logo. 3688, 3788, 4100, 4156, 4166, 4186, 4366, 4386, 4568, 4586, 4786, 5088, 5288, 5488, IHS459 $41.99 IH/Farmall
(0-75 PSI) fits: Late Cub, 100, 130, 140, 200, IH/Farmall
6388, 6588, 6788, 7288, 7488; Hydros: 70, 230 (1955 & up), Replaces: 364665R91, Case IH 86, 100, 186, Replaces: 109369C91 393487R91, 528245R91, 536967R1 (2.163” o/a length to end of spades, .675” (1/8” NPT male thread) thread O.D.) NOTE: 2 spade terminals. NOTE: Engine mounted. Has IH logo. See website for additional information. ABC1115 $14.95 12-volt Red Jewel Lens Assembly ABC3975 $4.95 Flat Lens only fits: Same as ABC3972 (For 29/32” mounting hole) fits: Some Cub Replaces: 71652C1 Parts,154 SN: 14536 & up, All 185; Will also fit (9/16” - 27 thread, .625” O.D. base) early 154 by enlarging hole to 29/32” Gauges NOTE: Red plastic. Replaces: 544311R1 NOTE: Used as low ABC3988 $2.49 oil pressure warning light. 1 wire lead. 12-volt Bulb only fits: Same as ABC3972 ABC343 $1.95 12-volt Light Bulb (For ABC1115) (24 amp, 3 watts, up to 14 volts, 1.200” fits: Some Cub 154 SN: 14536 & up, All 185 o/a length) (12 amp) NOTE: Used as low oil pressure warning light bulb. IHS452 $41.99 (0-75 PSI) fits: H, M, I, O, W series Oil pressure gauges w/ stainlessTractor steel (1939-46), Replaces: 41934DB bezel, parts (1/8” NPT male thread) For 2" diameter hole. IHS gauges have a metal base, glass NOTE: Dash mounted. Has IHC logo. lens & black face w/ white letters. Includes the IH logo & part Line adapter sold separately. number. ABC gauges vary from original appearance. IHS454 $41.99 When ordering a dash mounted oil pressure gauge you also (0-75 PSI) fits: H, M, Supers, I, O, W4, 6, 9 need to order (1) of the following fittings depending on the series gas; Crawlers: T-6, T-9, T-14 line size to adapt your existing line to the gauge: ABC538, Replaces: 41934DB IHS626, ABC2353. (1/8” NPT male thread) NOTE: Dash Part # USD Description / Application mounted. Has IH logo. Correct for 1947 & up. Line adapter sold separately. NOTE:Steiner Before 1955 the Oil Gauges were Zone gauges; 1955 & up they were 0-75 gauges. IHS1666 $42.50 (0-45 PSI) fits: MD, Super MD, MDV, IHS526 $41.99 WD6, Super WD6, WD9, Super WD9, (WDR9 SN: 12426 and up), Super MTA (0-75 PSI) fits: A, AV, B, BN diesel, TD6 & up; Power Units: UD6, UD9, Replaces: 43987DB UD14, UD18, UD24, Replaces: 258634R91, (1/8” NPT male thread) 702027C1 (1/8” NPT male thread) NOTE: Engine mounted. NOTE: Dash mounted. Has IH logo. Line adapter sold separately. Oil pressure gauges continue on next page
STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com 291 Oil pressure gauges w/ stainless steel Oil pressure gauges w/ stainless steel bezel, parts cont... bezel, parts cont... For 2" diameter hole. IHS gauges have a metal base, glass Part # USD Description / Application lens & black face w/ white letters. Includes the IH logo & part ABC1605 $16.50 Electric Oil Pressure Sensor Switch number. ABC gauges vary from original appearance. fits: 154 - 6788, Replaces: 3118643R1, When ordering a dash mounted oil pressure gauge you also 3106558R2, 3129031R91, 376855R92, need to order (1) of the following fittings depending on the 392249R92, 529796R1, 530034R2, 65425C1, line size to adapt your existing line to the gauge: ABC538, 91450C1 IHS626, ABC2353. ABC1486 $6.99 Part # USD Description / Application Electric Oil Pressure Sensor Switch fits: Case IH MXM120 - MXM190, MXU110 NOTE: Before 1955 the Oil Gauges were Zone gauges; - MXU135 (All w/ analog gauges) 1955 & up they were 0-75 gauges. Replaces: 83934153 IHS502 $41.99 (0-75 PSI) fits: 240, 300, 330, 340, 350, 400, 450, 600, 650 gas, LP, Replaces: 362039R91; Serviceable for 536962R2 (1/8” NPT male thread) NOTE: Dash mounted. Has IH Touch control gauge logo. Line adapter sold separately. Fits: Super A, Super AV, C, Super C, 100, 130, 140, 200, Replaces: 355840R91, IHS1871 $41.99 (0-45 PSI) fits the following diesels: 350, 400, 355841R91, 356465R91, 356466R91 450, 600, 650; Gas, LP, diesel: 460, 560, 660; Inc.® (43” lead length) Gas, diesel: 3616, 3800, 3850 Description Part # USD Replaces: 362177R94, 393488R91 Touch Control Temperature Gauge...... IHS525...... $76.99 (1/8” NPT male thread) NOTE: Dash w/ Right Angle 45" Lead mounted. Has IH logo. Line adapter sold NOTE: If not previously equipped w/ touch control gauge, separately.
Case IH customer must also purchase 355844R91 strainer assembly from IH
IH/Farmall ABC082 $21.50 or salvage yard as it is tapped for gauge capillary line. (0-50 PSI) fits: MD - WD9, 350 diesel - 660 (1/8” NPT male thread) NOTE: Line adapter sold separately. Parts, No logo. Water temperature gauges w/ stainless steel bezel, part ABC005 $21.50 Dash mounted gauged are for 2" diameter hole. IHS gauges (0-80 PSI) fits: H - 660 have a metal base, glass lens & black face w/ white letters. (1/8” NPT male thread) Includes the IH logo & part number. ABC gauges vary from Gauges NOTE: Line adapter sold separately. original appearance. No logo. Part # USD Description / Application
ABC523 $23.99 Oil Gauge Copper Line Kit (For tractors IHS589 $66.99 Water Temperature Gauge (1939 - 46) using 1/8” x 6’ copper oil line) Tractor fits: A, AV, B, BN, Replaces: 53619DC (6’ x 1/8” line, (2) 5/16” - 24 UNF Nut, (19-1/4” long from rear of gauge to end of (2) compression sleeves, (1) 1/8” - 27 probe) NOTE: Has IHC logo. NPTF female to 5/16” - 24 UNF male adapter) NOTE: Use w/ ABC538 fitting. IHS3173 $66.99 Water Temperature Gauge fits: Super A, ABC2353 $3.95 Oil Gauge Adapter Fitting (For gauges w/ Super AV, Super A-1, Super AV-1, B, BN; out removable fitting) fits: F20, F30, H, M, Serviceable for 100, 130, 140 MD, Supers, MTA, I, O, W4 - WD9 series, Replaces: 53619DB, 53619DC 10-20, 15-30, 22-36 (1/8” NPT female to (19-1/4” long from rear of gauge to end of 1/4” tubing female) probe) NOTE: Has IH logo. ABC538 $13.95Steiner IHS934 $21.50 Water Temperature Bracket fits: A, AV, Oil Gauge Fitting (For gauges w/out removable fitting) (1/8” NPT to 1/8” Super A, Super AV, Super A1, Super AV1, compression) USA made NOTE: Use w/ B, BN, 100, 130, 140 ABC523 line kit. Replaces: 50495D, 53620D USA made IHS528 $51.99 IHS626 $13.95 Water Temperature Gauge (1939-46) Oil Gauge Fitting(For gauges w/out fits: H, M, (I, O, W series 4-9 gas, diesel), removable fitting), Replaces: 257523R1 T6, Replaces: 63783D (1/8” NPT to 1/4” compression) (16” lead) NOTE: Has IHC logo. USA made
292 STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm Water temperature gauges w/ stainless Fuel gauges cont... steel bezel, part cont... Part # USD Description / Application Part # USD Description / Application IHS3409 $124.95 Vented Fuel Gauge Cap w/ IHS239 IHS453 $49.95 Gasket fits: I6, ID6, M, MD, MV, MDV, O6, Water Temperature Gauge (1947 & up) OS6, ODS6, Super M, Super MD, Super fits: H, M, (I, O, W series 4-9 gas, diesel), MV, Super MDV, Super MTA, Super Supers, Late TD-6, 100, 130, 140 MDTA, Super MVTA, Super MDVTA, Replaces: 67135D (16” lead) Super W6, Super WD6, Super W6TA, NOTE: Has IH logo. Top view Super WD6TA, W6, WD6 Replaces: 365499R92 (14-3/4” o/a length)
IHS531 $51.99 Water Temperature Gauge fits: C, Super C, IHS3404 $124.95 Vented Fuel Gauge Cap w/ IHS239 200, 230, 240, 300, 330, 340 gas only, T340, Gasket fits: 300, 350 Row-Crop & Utility; (350, 400, 450, 460, 560 & 660 gas, diesel) 400 up to SN: 38332, W400 up to SN: 3595, Replaces: 353868R91, 369849R91, Early 450, Early W450 gas, diesel (All w/ 393476R91, 393481R91, 536960R2 18 gal. tank), Replaces: 365495R92 (72” lead) NOTE: Has IH logo. Top view (17-1/4” o/a length)
ABC239 $29.95 IHS791 $41.99 Fuel Gauge fits: 766, 966, 1066, 1466, 1468, Water Temperature Gauge fits: C - 660 1566, 1568, 4366, 4386, 4568, Hydro 100; (100 - 220 degree temperature range, 72” Calibrated correctlyInc.® for 460, 560, 660 w/ lead, 5/8-18 UNF w/ 1/2” pipe bushing) Stewart Warner sender but has a different appearance, Replaces: 533992R1, H142794; IH/Farmall IH/Farmall
Will work for 378426R91 (32-244 OHM) Case IH ABC1593 $31.50 Water Temperature Gauge fits: C - 650 Fuel sending units, gasket (60” lead, 5/8-18 UNF w/ 1/2” pipe Part # USD Description / Application bushing) IHS1717 $49.99 Fuel Sending Unit fits: 444, 460, 560, 660, Parts,2444 (All w/ Rochester fuel gauge)
Replaces: 370376R92 (0-70 OHMS) Gauges NOTE: If your tractor has a Stewart Fuel gauges Warner replacement gauge, then you need sender IHS886. Part # USD Description / Application IHS1711 $55.55 IHS532 $41.99 Fuel Pressure Gauge (80 PSI) (Screw-In Type) fits: MD, MDV, Super MD, MTDA, Fuel Sending Unit fits: 504, (F544 diesel), ID, TD, TD14, TD14A, OD & WD 6 - 9 I544, 606, I656, 664 gas, diesel series; 400, 450, 600, 650 (All diesel) Replaces: 377103R91, 377104R91, 84212457 Replaces: 260390R94, 263791R92 (32-244 OHM, 14-1/2” deep) NOTE: Gauge has aTractor metal base, glass lens & black face w/ white letters. Includes the IH logo & part number. IHS886 $48.50 Fuel Sending Unit fits: 560, 660 both w/ Stewart Warner R92 fuel gauge only, F544 IHS903 $41.99 12-volt Negative Ground Fuel Gauge gas, F656, 666, 686, 706, 756, 766, 806, 826, (Rochester Style) fits the following w/ 856, 966, 1026, 1066, 1206, 1256, 1456, 1466, factory Rochester gauge: 340 diesel, 460 1468, 1566, 1568; Hydros: 70, 86, 100, Row- gas, diesel, 560 gas, diesel, 660 gas, diesel Crops only, Replaces: 378427R91 Replaces: 369607R91 (0-70 OHMs) (32-244 OHM, 16-1/4” deep) NOTE: This aftermarket fuel gauge replaces the factory Rochester gauge. ABC3256 $4.29 Fuel Sending Unit Gasket fits: 240 - 1568 SteinerHas IH logo. Replaces: 369154R1 (1.715” I.D., 2.850” IHS3414 $124.95 O.D., 0.091” thick, (5) 1/4” screw holes) USA made NOTE: See website for full applications. Vented Fuel Gauge Cap w/ IHS239 ABC3261 $3.95 Fuel Sending Unit Gasket fits: Case IH Gasket fits: H, HV, I4, Super H, Super HV, 770 - 4894, 7110 - 8950, 9110 - 9390, MX100 O4, OS4, W4, Super W4 - MX170; IH 354 - 884, 786 - 7488 Replaces: 365498R92 (13” o/a length) Replaces: 528359R94 (1.715” I.D., 2.850” Top view O.D., 0.132” thick, (5) 1/4” screw holes) USA made
STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com 293 Cluster gauges Tachometers, parts cont... NOTE: For 12-volt light bulb order ABC343. Part # USD Description / Application Part # USD Description / Application IHS849 $129.99 Tachometer fits: Correct for 400, 450, IHS795 $149.95 Cluster Gauge Assembly w/ Round W400, W450 (gas, LP only); Serviceable Threaded Terminals (Fuel & Temperature) for F300, F350 gas, LP, diesel fits: 544, 656, (666, 686 diesel only), 706, Replaces: 364393R91 NOTE: Serviceable: 756, 806, 826, 856, 1026, 1206, 1256, 1456, the RPM will read right, the PTO & 4166, 4186; Hydros: 70, 86; (Serviceable ground speed is in a different location. for 404, 424, 444, 504, 606, 3414 gas but IHS1500 $179.99 capillary line is longer) Replaces: 376854R93, 380397R93, Tachometer fits the following diesels: 382733R93, 396380R91, 397937R92, 400, 450, W400, W450 397939R92, 539293R1, 1546480C1 Replaces: 364395R91 (32-244 OHM) NOTE: For light bulbs use ABC343. IHS853 $39.95 IHS1536 $149.99 Cluster Gauge Assembly w/ Round Tachometer Mounting Bracket fits: F300, Threaded Terminals (Fuel & Temperature) F350, 400, 450, W400, W450 gas, LP, fits: 706, 806, 1206, 2706, 2806, 21206 diesel, Replaces: 364376R1 Replaces: 382732R91, R92, R93, R94; IHS753 $79.95 396380R91, R92, R93 (32-244 OHM) Inc.® NOTE: For light bulbs use ABC343. Tachometer fits: 424, 444, 2424, 2444 gas IHS797 $149.99 Cluster Gauge Assembly (Oil & Replaces: 388893R91 Temperature) fits: 766, 966, 1066, 1466, NOTE: Clockwise rotation. 1468, 1566, 1568, 4366, 4386, 4568, 4586, Hydro 100 (All diesel) (32-244 OHM) Case IH IHS1905 $49.99 Tachometer Drive Gear Assembly
IH/Farmall NOTE: For light bulbs use ABC343. fits: Cub, 130, 140, 230, 240, 300, 330, (340 gas only), (350 gas, LP only), 400, 404, Parts,(424, 444 both gas only), 450, (504 gas, LP Air cleaner change gauge only), 600, 650 for IH distributor systems Fits: 656, 664, 666, 686, 706, 766, 806, 826, only, Replaces: 369695R91 NOTE: Nylon 856, 966, 1026, 1066, 1206, 1256, 1456, gear w/ metal shaft. Must order IHS2697 1466, 1468, 1566, 1568, 4100, 4156, 4166, connector housing & IHS3119 clip if 4366, 4386, 4568, 4586 replacing ALL NYLON tachometer
Gauges Replaces: 389871R91, 397942R91, drive gear. 533991R1, 536230R1, 1341364C1 IHS2697 $49.99 Tachometer Cable Connector Housing Description Part # USD fits: Same as IHS1905 Air Cleaner Change Indicator / Gauge...... IHS789...... $34.95 Replaces: 369692R1 NOTE: For use w/ nylon gear w/ metal shaft. Will need Tractor to order tach drive gear IHS1905 & Tachometers, parts IHS3119 clip for 300 - 650 if replacing ALL NYLON gear/shaft drive. Part # USD Description / Application IHS3119 $2.99 Tachometer Cable Connector Housing IHS847 $102.75 Retainer Clip (Thrust Stop) fits: Cub - 650 Tachometer fits: I-300 Utility, I-350 (Same as IHS1905), Replaces: 369693R1 Utility gas (both w/ Live PTO & torque USA made NOTE: For use w/ nylon amplifier), Replaces: 363829R91 gear w/ metal shaft. Will need to order tach drive gear IHS1905 & IHS2697 connector housing for 300 - 650 if replacing ALL NYLON gear/shaft drive. ABC476 $42.50SteinerTachometer Drive Assembly w/ Gaskets fits: 350 Row Crop diesel IHS3112 $64.50 Distributor Drive Housing (USED, not Replaces: 367150R91 NOTE: Driven off New) w/ Opening for Tachometer Drive the generator. 14 & 43 tooth gears. fits: Cub - 650 equipped w/ tachometer drive; Will also fit Letter series w/out IHS940 $59.99 drive by ordering IHS3125 block off plate Replaces: 363749R91, 363763R11 Tachometer fits: 340 gas USA made NOTE: Use w/ IHS1716 Replaces: 371243R92 distributor when replacing a magneto. Tachometer drive, housing, or block off plate sold separately.
294 STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm Tachometers, parts cont... Tachometer cables Part # USD Description / Application Part # USD Description / Application IHS3121 $8.85 IHS1840 $31.50 Tachometer/Speedometer Drive Cable Tachometer Connection Housing Plate w/ Nylon Sheath fits as a tachometer w/ Gasket fits: Cub - 650 (Same as cable for the following: Cub, I340 gas, IHS1905), Replaces: 363817R1 (plate), TD340, (I460 gas, LP, diesel), I504 gas, 363814R2 (gasket) USA made F504 diesel, (606 gas, LP, diesel). Fits as a speedometer drive cable for the IHS3361 $46.95 Tachometer Drive Gear Assembly fits: following Hydros: 100, 826, 966, 1026 340 diesel, 504 diesel; Following gas, LP; Replaces: 370197R91, 397016R92 454, 464, 544, 574, 666, 674, 686, 756, 766, (43” long) 806, 826, 856, Hydro 70, Hydro 86, (460, IHS1834 $36.99 Speedometer Drive Cable w/ Nylon 560, 606, 656, 660, gas, LP, diesel, (706 w/ Sheath fits the following Hydros: 70, 86, C263, C291, D282), Replaces: 178575H1, 544, 656, 666 gas, LP, diesel, Also fits as a 368245R11, R12 (1.765” o/a length) tachometer cable for 354, 364, 434, 3414 NOTE: 13 teeth. gas, Replaces: 398955R93, 3068984R92 IHS3365 $22.95 Tachometer Drive Housing Fitting (45-1/8” long) NOTE: Has small fittings fits: Same as IHS3361 on both ends. Replaces: 178309H1, 368246R1 FDS423 $17.80 (1.407” o/a length, 3/4”-20 pipe thread Inc.® Tachometer Cable w/ Metal Sheath to 7/8”-18 thread) USA made fits: 240, I300, 330, 340, 504 gas, (I350 gas, IH/Farmall IHS768 $49.95 Tachometer fits: 454, 464, 484, 485, Hydro IH/Farmall
diesel); 404, 424, 444, 2424, 2444 gas Case IH 574, 584, 585, 674, 684, 784, 785, 884, 885, Replaces: 150938R91, 363811R92 H84, 2400, (Hydro 2500A SN: 100001 & (48” long, square ends) up) gas, diesel, Replaces: 3121926R91, 3125106R92, 66455C1 IHS1951 $25.99 NOTE: Clockwise rotation. Tachometer/Speedometer Cable w/ Nylon Sheath Fits the following IH IHS176 $102.50 Parts,Utilities w/out cabs up to 1985: 484
thru 885; Fits following Row-Crops (gas Gauges Tachometer fits: 460, 560 gas, diesel unless noted) F544, F656, 666, 686, (706 Replaces: 383092R91, 383093R91 gas, D282 diesel), 756, 766, 806, 826, 856, 3514 w/ C175 gas; Also as a speedometer for Hydros: 454, 464, 574 IHS907 $159.95 Tachometer fits: 544, 656 Row-Crop w/ Replaces: 393326R92, 529234R1 Gear Drive & w/ T.A. gas, diesel (58-3/8” inner cable length) Replaces: 103153A1, 389973R91, IHS697 $29.99 401841R91 NOTE: Has single light hole in rear. For light bulbs use ABC343. Tachometer Cable w/ Metal Sheath Tractor fits: 300, 350, 460 (All Farmall Row- IHS175B $102.50 Crops) gas, diesel, Replaces: 364375R91 Tachometer w/ Black Face fits: 706, 806, (61-1/4” long w/ square ends) 1206; Industrials: 2706, 2806, 21206 Replaces: 66748C1, 388588R91, 388589R91 NOTE: For light bulbs use IHS248 $29.99 ABC343. Tachometer Cable w/ Metal Sheath IHS175W $102.50 Tachometer w/ White Face fits: 756, 766 fits: I544 diesel, 560, 660 gas, diesel, gas up to SN: 10934, 826, 856, 1256, 1456, 886 w/ D360 engine, 986, 1086, 1468, 2756, 2856, 21256, 21456 1486, 1568, 3688, 3688 HC, Replaces: SteinerReplaces: 66748C1, 388589R91, 371245R91, 401830R92 (63” long) 397945R91, 398095R91 NOTE: For light bulbs use ABC343. IHS256 $43.50 IHS765 $152.50 Tachometer w/ Knob fits: 766 diesel, Tachometer Cable w/ Metal Sheath Early 786, Early 886, 966 w/ Gear Drive, fits: Farmalls 400, 450, W400, W450 gas, 986, 1066 w/ Gear Drive, 1086, 1466 w/ diesel, Replaces: 364396R91 Gear Drive, Early 1486 (66-3/8” long) Replaces: 67679C2, 103151A1, 107368C3, 84212503 NOTE: For light bulbs use ABC343. Tachometer cables continue on next page
STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com 295 Tachometer cables cont... Electrical outlet socket, parts Part # USD Description / Application Part # USD Description / Application IHS1289 $25.50 ABC395 $26.99 (Nylon Electrical Outlet Socket (For implements sheath) w/ lights) Serviceable for IH / Farmall models NOTE: 2 plated brass pins. Tachometer Cable w/ Nylon Sheath OR Metal Sheath fits: 600, 650, (666 w/ D-310 engine), 766, 806, 856, 1026, 1206, 1256, ABC1868 $21.75 Auxiliary Male 2-Pin Connector Plug 1456, 3088, 3288, 4166, 4186, 4366 (diesels (For ABC395), Replaces: 364559R91 IHS1255 $32.99 only), Replaces: 384845R92, 385082C91, (3.045” long, .760” wide, .340” hole dia. for (Metal wires) NOTE: Plated brass pins. Wires sheath) 387916R91, 393328R93 (80” long) must be soldered or crimped. ABC2285 $4.99 Electrical Outlet Socket Boot fits: Tractors using single wire outlet NOTE: 1 wire style. Does not fit ABC395. IHS1788 $29.99 Tachometer Cable w/ Nylon Sheath fits the following diesels: 706 w/ D310 engine, 756, 826, 966, 1066, 1466, 1566, Hydro 100 (diesels only) Battery cables - USA made Heavy Duty; StraightInc.® terminals Replaces: 396386R93 (87” long) unless otherwised noted EO = Eyelet Opening L = Length
Instrument panel housings Part # USD Applications / Specifications Part # USD Description / Application Ground Cables (Non-Insulated) Case IH
IH/Farmall IHS2341 $34.99 ABC401 $12.99 (2 Gauge, EO = 7/16”, L = 6”) LH Lower Dash Side Support Panel ABC411 $16.99 (2 Gauge, EO = 7/16”, L = 9”) fits: 154 up to SN: 18708 Parts, ABC405 $19.99 (2 Gauge, EO = 1/2”, L = 13”) Replaces: 404829R1 USA made NOTE: Close out. ABC1175 $17.99 (2 Gauge, EO = 7/16”, L = 14”) ABC421 $22.99 (2 Gauge, EO = 3/8”, L = 19”) IHS2324 $34.99 ABC403 $24.99 (2 Gauge, EO = 7/16”, L = 24”) LH Lower Dash Side Support Panel Insulated Battery Cables fits: 154 SN: 22332 & up; 185 ABC407 $16.99 (2 Gauge, EO = 3/8”, L = 10-1/2”) Replaces: 404829R2 USA made
Gauges / ElectricalGauges parts ABC415 $16.99 (2 Gauge, EO = 3/8”, L = 12”) NOTE: Close out. ABC413 $17.99 (2 Gauge, EO = 3/8”, L = 14-1/2”, 90 degree terminal ends) IHS2320 $34.99 Tractor ABC1582 $13.95 (2 Gauge, EO = 3/8”, EYELET BOTH RH Lower Dash Side Support Panel ENDS, L = 16-1/4”) fits: 154, 185 (RH side only); 184 (RH & LH), Replaces: 404830R2 USA made ABC417 $17.99 (2 Gauge, EO = 3/8”, L = 21”) NOTE: Close out. ABC419 $20.50 (2 Gauge, EO = 3/8”, L = 27”) IHS2936 $55.50 Fits: Farmall Cub up to SN: 224400, Cub IHS2439 $89.95 LoBoy up to SN: 18700 Replaces: 351956R91 (2 Gauge, Dash Cowling (Rear Hood) L = Appx. 87”) NOTE: Black PVC fits: 154, 184, 185, Replaces: 404585R2 covering, soldered & heat sealed ends. SteinerNOTE: Fiberglass. Primer only. Wet sand w/ fine paper prior to painting.
Battery cable parts IHS792 $81.99 Part # USD Description / Application Instrument Panel Housing fits: 766, 966, IHS496 $11.50 1066, 1466, 1468, 1566, 1568, Hydro 100 Battery Cable Hold Down Clip fits: All Replaces: 531038R1 Cubs, Replaces: 351929R1, 363504R1 NOTE: Cast aluminum. USA made
296 STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm Battery cable parts cont... Battery boxes, parts cont... Part # USD Description / Application Part # USD Description / Application IHS3900 $29.95 IHS520 $159.99 4-pc. Battery Box Assembly (Top, LH, Battery Cable Cover fits: F300, F350 both RH & Front covers) fits: Super A SN: Row-Crops, Replaces: 362135R1 348644 & up, Super C SN: 176523 & up, (7-5/8” o/a length) USA made 100, 130, 140, 200, 230 Replaces: 350637R92, 358540R11, 358541R11, 358542R11 NOTE: Powder IHS3905 $32.95 coat red. Can replace IHS082 for easier Battery Cable Cover fits: F400, F450 both battery access. Restoration quality. Row-Crops, Replaces: 362132R1 IHS516 $38.95 Lid only w/ Retainers & Rubber Bushings (8-7/16” o/a length) USA made NOTE: Primer paint. (For IHS520) IHS517 $49.95 LH Battery Box Side Cover w/ Clips & T-Bolt (For IHS520) IHS518 $49.95 RH Battery Box Side Cover Battery boxes, parts w/ Clips & T-Bolt (For IHS520) IHS519 $20.95 Battery Box Front Cover (For IHS520) Part # USD Description / Application IHS691 $3.95 IHS080 $99.95 T-Bolt fits: A, B, C, Supers, 100, 130, 140, 200, 230 (All using OEM Battery boxes Battery Box w/ IHS080L Lid & Inc.® w/ lids), Replaces: 50939DX IHS080H Hardware fits: Cub, Cub IH/Farmall NOTE: Sold individually. IH/Farmall LoBoy , Replaces: 538609R2 (box), IHS081 $89.95 Case IH 351336R12 (lid) (Inside: 7-3/16” wide, Battery Box w/ IHS081L Lid 8-1/2” tall, 9-1/4” long) fits: H, Super H up to SN: 19233, O, W4 NOTE: Powder coat red. Restoration series, Replaces: 51680DB quality. 13 gauge steel. (Inside: 7-1/4” wide, 8-3/4” tall, 9”
long) NOTE:Mounts under gas tank. parts Electrical IHS080L $29.95 Lid only w/ Retainers & Rubber Bushings Parts,Powder coat red. Restoration quality. (For IHS080) IHS081L $35.50 Lid only w/ Retainers & Rubber Bushings IHS080F $19.49 Front only (For IHS080) (For IHS081L) IHS080H $7.50 Hardware only (For IHS080) IHS920 $5.50 IHS1608 $79.95 Battery Box Support Lock Bolt Battery Cover fits: 154, 184, 185 (For IHS01L) USA made NOTE: Bolt Replaces: 404575R2 NOTE: Fiberglass. NOT included w/ box. 2 used per Wet sand w/ fine sand paper prior to tractor; Sold individually. painting. IHS079AH $119.95 Battery Box w/out Imprint fits: Super IHS225B $118.50 Tractor H SN: 19234 & up, Replaces: 359500R91 Battery Box w/ IHS225LR Lid fits: A, B, (7-5/8” wide, 9-1/2” tall, 14-7/8” long) BN, Replaces: 50943D (box), 50943DX NOTE: Mounts under seat. Powder (box w/ lid) (Inside: 7-1/8” wide, coat red. Restoration quality. 9” tall, 9” long) NOTE: Powder coat red. Restoration quality. IHS2427 $4.95 Battery Lid Eye Bolt & Wing Nut fits: H, HV, (Super H up to SN: 19233), M, MD, MV, (Super M up to SN: 28174), IHS225LR $38.95 Lid only w/ Retainers & Rubber Bushings OS4, W4, Super W4, W6 gas, WD6 (For IHS225B) Replaces: 51684DX NOTE: 2 used per IHS082 $94.95 tractor; Sold individually. SteinerBattery Box w/ IHS516 Lid fits: C, IHS084 $99.95 (Super A up to SN: 348643), Super C Battery Box w/ IHS084L Lid fits: M, up to SN: 176522, Replaces: 358544R91, MD, (Super M up to SN: 28174), 350634R91 (Inside: 7-1/8” wide, 8-3/4” (All under tank), Replaces: 51712D tall, 9” long; bolts down w/ 4 bolts) (Inside: 7-3/16” wide, 9-1/8” tall, 11- NOTE: Powder coat red. Restoration 3/4” long) NOTE: Battery box mounts quality. under gas tank. Powder coat red. Restoration quality. IHS516 $38.95 Battery Box Lid w/ Retainers & Rubber Bushings (For IHS082) Battery boxes, parts continue on next page
STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com 297 Battery boxes, parts cont... Battery boxes, parts cont... Part # USD Description / Application Part # USD Description / Application IHS3146 $119.99 IHS721 $9.75 Battery Box w/ IHS084L Lid fits: I6, O6, Battery Retainer J-Bolt (Pair) fits: IH/ OS6, W6, (Super W6 up to SN: 9084), Farmall models, Replaces: 393161R1, W9, WR9, Super WD9, Super WDR9, 198185A1 (5/16”-18 UNC x 10-3/4”) (600, 650 diesels), Replaces: 60700D IHS911 $2.50 Battery Box Cable Grommet fits: Cub, (Inside dimensions: 7-3/16” wide, Cub LoBoy, A, B, H, M, Super H, Super 9-1/8” tall, 11-3/4” long) M, MTA, O, W series, (300, 350, 400, 450 as light wire & accessory grommet, IHS084L $34.95 Lid only w/ Retainers & Rubber Bushings 2 used per box), Replaces: 24179D, (For IHS084, IHS3146) 52118D, 248-1146 IHS802 $5.95 Battery Box Support Lock Bolt IHS1276 $114.95 Battery Door fits: 385, 484, 485, 584, 585, fits: Same as IHS084, Replaces: 51712D 684, 685, 784, 785, 884, 885 (All through NOTE: Bolt NOT included w/ box. 1985); 395, 495, 595, 695 2 used per tractor; Sold individually. Replaces: 1536764C1, 3121393R91 IHS3913 $32.50 Battery Box Anchor Strip fits: M, MD, (15-5/8” wide x 18-5/16” long) (Super M up to SN: F28174 & L504801), USA made NOTE: Fiberglass like Super MD up to SN: F28174 original. Parts are gel coated w/ a Replaces: 51711D (14.25” o/a length, wax release agentInc.® on surface. We 1.00” wide, .19” thick) USA made recommend a wet sand w/ fine paper NOTE: Bolts to clutch housing under prior to painting. The release will the fuel tank. Only fits tractors w/ not allow paint to adhere. Does not battery box under fuel tank. Primer include the mounting screws. paint. 1 used per tractor. IHS1279 $114.95 Battery Door fits: 454, 464, 574, 674; Case IH IHS079AM $119.95 Battery Box w/out Imprint fits: Super Industrial: 2400, 2500 IH/Farmall M SN: 28175 & up gas, diesel, Super Replaces: 401933R1, 3113425R1 MTA series, Replaces: 358693R91 (20-5/16” long, 15-3/8” wide) (7-5/8” wide, 9-1/2” tall, 14-7/8” long) Parts,USA made NOTE: Fiberglass like NOTE: Mounts under seat. Powder original. Parts are gel coated w/ a coat red. Restoration quality wax release agent on surface. We IHS079B $119.95 Battery Box w/ Imprint on End recommend a wet sand w/ fine paper fits: F350, 450; Will fit F300, F400, but prior to painting. The release will rear light is on opposite side not allow paint to adhere. Does not Replaces: 362059R92 include IHS1557 mounting screws. (8” wide, 9-1/2” tall, 15” long) IHS778 $87.95 Battery Door fits: 454, 464, 574, 674; Electrical parts NOTE: Mounts under seat. Rear light Industrials: 2400, 2500 mounts to LEFT side of box. Powder Replaces: 401933R, 3113425R1 coat red. Restoration Tractorquality (20-3/8” long, 15-3/8” wide) IHS862 $84.00 Battery Lid w/ Hold Down fits: 300, USA made NOTE: Metal. New & 330, 350 Utilities gas (All w/ manual improved steel replaces the fiberglass steering), Replaces: 362489R93, door. 358277R2 NOTE: Must be trimmed for IHS1557 $10.95 Slotted Thumb Screw w/ Retainer tractors w/ power steering. fits: 404, 424, 444, I504, 544, 656, 706, 756, 806, 826, 856, 1026, 1206, 1256, 1456 ABC365 $4.95 Rubber Bushing (For Battery Box Lid) Replaces: 376787R1 (retainer), fits: Cub - 650, Replaces: 51690D 3112170R11, 377521R1,R3, 389872R1 (.735” tall) NOTE: See website for (screw) (5/16”-18 NC x 3/4”, 1.100” applications. Steiner o/a length, .775” dia. head) USA made ABC363 $4.95 Rubber Bushing (For Battery Box Lid) NOTE: Retains lower hood side panels. fits: Cub - 650, Replaces: 51689D 4 used per tractor; Sold individually. (1.060” tall) NOTE: See website for IHS859 $84.95 Battery Cover fits: 544, 656; Serviceable applications. for 666, 686, Hydro 70, Hydro 86 ABC364 $3.75 gas, diesel (All w/ battery mounted Rubber Bushing Retainer (For Battery under the dash), Replaces: 388219R1, Box Lid) fits: Cub - 650 538585R1 USA made NOTE: Primed Replaces: 50942D NOTE: See website metal. For serviceable models must for applications. trim cover (too tall) to fit.
298 STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm Battery boxes, parts cont... Part # USD Description / Application Part # USD Description / Application IHS893 $154.50 Wiring Harness Kit (For 6-volt systems IHS230 $27.75 NEW & IMPROVED! Battery Cover only) fits: Cub SN: 501 - 115402 w/ fits: IH 706, 756, 766, 806, 826, 856, 966, 3 terminal cut-out relay, Replaces: 1026, 1066, 1206, 1256, 1456, 1466, 1468, 351325R91 NOTE: 5 main harness wires 1566, 1568, Replaces: 71717C91 + 6 separate wires = 11 wires. IHS895 $179.99 IHS721 $9.75 Battery Retainer J-Bolt (Pair) fits: IH Wiring Harness Kit (For 6-volt systems 706, 756, 766, 806, 826, 856, 966, 1026, only) fits: Cub SN: 115403 - 165152 w/ 1066, 1206, 1256, 1456, 1466, 1468, 1566, 4 terminal voltage regulator, Replaces: 1568, Replaces: 393161R1, 198185A1 354252R91 NOTE: 7 main harness wires (5/16”-18 UNC x 10-3/4”) + 6 separate wires = 13 wires. NOTE: Restoration quality. IHS891 $205.50 Wiring Harness Kit (For 6-volt systems IHS868 $67.49 Battery Tray fits: IH 706, 756, 766, 806, only) fits: Cub SN: 165153 - 210000 w/ (LH) (826 w/ gear drive), 856, 966, 1026, 4 terminal voltage regulator, Replaces: 363507R91; Cub LoBoy up to SN: 10000 IHS870 $67.49 1066, 1206, 1256, 1456, 1466, 1468, 1566, NOTE: Has 2 wires leading to (RH) 1568 IHS868 Replaces: 399046R1, Will work headlights. 8 main harness wires + 7 for 399048R1 separate wires = 15 wires. IHS870 Replaces: 399047R1, Will work NOTE: IHS895 & IHS891 will interchange. The only difference for 399055R1 USA made NOTE: Will is IHS891 has 2 separate wires for headlightsInc.® & the IHS895 has a NOT fit Hydros. Use IHS868 & IHS870 single wire to the headlights. IH/Farmall w/ heavy duty battery (5” wide) group IHS3273 $249.99 Wiring Harness Kit (For 6-volt systems IH/Farmall IHS868 IHS870 Case IH 4EH. only) fits: Farmall Cub SN: 210001 - IHS864 $67.49 224400; IH Cub LoBoy SN: 10001 - 18700 (LH) Battery Tray fits: IH 706, 756, 766, 806, (Both w/ 4 terminal voltage regulator) IHS866 $67.49 (826 w/ gear drive), 856, 966, 1026, Replaces: 371032R91, 371033R91
(RH) 1066, 1206, 1256, 1456, 1466, 1468, 1566, IHS3518 $279.99 Wiring Harness Kit (For 12-volt generator parts Electrical 1568 Parts,systems only) fits: Cub SN: 239827 - 248124 IHS864 Replaces: 380409R91, 403529R1 IHS2664 $102.99 Main Engine & Dash Wiring Harness IHS866 Replaces: 384491R91, 403530R1 fits: 154, 185, Replaces: 404847R2 USA made NOTE: Will NOT fit NOTE: Does not include lights, PTO or Hydros. Use IHS864 & IHS866 rear harness. Use w/ 6 or 8 socket plug. w/ regular duty battery (4-1/4” wide) group 3EH. IHS481 $179.99 Wiring Harness Kit (For 6-volt systems IHS864 IHS866 only) fits: A, Super A up to SN: 345198, B, BN (All w/ 3 terminal cut-out relay) IHS3421 $26.50 Battery Hold Down Support Bracket fits: 786, 886, 986, 1086, 1486, 1586, IHS484 $185.00 Wiring Harness Kit (For 6-volt systems Hydro 186, Replaces: 103936C1 only) fits: A, A1 when equipped w/ 4 USA made NOTE:Tractor 2 used per tractor; terminal regulator, Super A SN: 345199 & Sold individually. up, B, BN (All w/ 4 terminal regulator) NOTE: Will fit A, early Super A, B, BN if converted to regulator. IHS482 $154.50 Wiring Harness Kit (For 6-volt systems Restoration quality wiring only) fits: C, Super C (All w/ 3 terminal harness kits for generators - cut-out relay) NOTE: Will not fit tractors w/ USA made fast hitch. Rear light wire will be shorter. NOTE: For tractors w/ GENERATORS, IHS971 $179.99 Wiring Harness Kit (For 6-volt systems not alternators. Wiring harness kits only) fits: C, Super C (All w/ 4 terminal have original style braiding and include Steiner regulator) NOTE: Will not fit tractors w/ headlight, wires and wiring instructions. fast hitch, Rear light wire will be shorter. All terminals are silver soldered and IHS904 $205.50 sealed. Wires are individually labeled for Wiring Harness Kit (For 6-volt systems ease of installation. Alternator conversion only) fits: H up to SN: 340953 w/ 3 harnesses are on page 301. terminal cut-out on top of generator IHS906 $219.99 NOTE: Cut-out relay has two terminals on one side & one Wiring Harness Kit (For 6-volt systems terminal on the other side. Regulator has three terminals on only) fits: H SN: 340954 & up w/ 4 one side & one terminal on the other side or bottom. See page terminal regulator under fuel tank 392B for a further explanation. Wiring harnesses continue on next page
STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com 299 Restoration quality wiring Restoration quality wiring harness kits harness kits for generators - for generators - USA made cont... USA made cont... Part # USD Description / Application NOTE: For tractors w/ GENERATORS, IHS2635 $39.99 12-pc.Wiring Harness Wire Clip Set not alternators. Wiring harness kits fits: M, MV, (Super M, Super MV both have original style braiding and include up to SN: F28174 & up to SN: L504801) headlight, wires and wiring instructions. gas, LP NOTE: Zinc plated w/ rubber All terminals are silver soldered and coated ends. Includes instruction sheet. sealed. Wires are individually labeled for Does not include battery cable clips. See ease of installation. Alternator conversion website for replacement numbers. harnesses are on page 301. IHS3532 $229.99 Wiring Harness Kit fits: W6 up to SN: NOTE: Cut-out relay has two terminals on one side & one 29473 w/ 3 terminal cut-out relay terminal on the other side. Regulator has three terminals on Replaces: 58224DX, 62504D, 63245DX one side & one terminal on the other side or bottom. See page IHS3536 $229.99 392B for a further explanation. Wiring Harness Kit (For 6-volt generator w/ 4 terminal regulator systems) fits: W6 Part # USD Description / Application SN: 36780 & up gas, Super W6 up to SN: IHS480 $205.99 Wiring Harness Kit (For 6-volt systems 9999 gas, Replaces: 62504D, 352710R11 only) fits: H when converted to 4 terminal IHS2871 $229.99 Wiring Harness Kit (For 6-volt generator regulator on generator & regulator systems)Inc.® fits: 100, 130 IHS3279 $219.95 Wiring Harness Kit (For 6-volt systems Replaces: 358109R92, 363476R91, only) fits: I4, O4, W4 (All w/ 3 terminal 363483R91 cut-out relay), Replaces: 57350DA, IHS3286 $263.75 Wiring Harness Kit (For 12-volt generator 32054DX, 31522DX, 31552DX systems) fits: 140 SN: 26801 - 45000 Replaces: 387315R91, 387318R91, IHS3283 $232.50 Wiring Harness Kit (For 6-volt systems Case IH 404354R1
IH/Farmall only) fits: I4, O4, W4 (All w/ 4 terminal voltage regulator) IHS3540 $294.50 Wiring Harness Kit (For 12-volt generator) fits: 140 SN: 45001 - 57723 IHS488 $205.95 Wiring Harness Kit (For 6-volt systems Parts,Replaces: 547048R91 only) fits: Super H up to SN: 19233 w/ IHS2896 $232.99 Wiring Harness Kit (For 6-volt generator battery under tank & 4 terminal regulator & regulator systems) fits: 200, 230 w/out IHS2629 $39.99 12-pc. Wiring Harness Wire Clip Set fast hitch, Replaces: 354243R92, 366461R91 fits: H, HV, (Super H, Super HV both NOTE: Fast hitch harness is available by up to SN: 19233) NOTE: Zinc plated w/ special order, call for quote. rubber coated ends. Includes instruction IHS3819 $299.95 Wiring Harness Kit (For 6 or 12-volt sheet. Does not include battery cable w/ generator) fits: I300 Utility, early Electrical parts clips. See website for replacement I350 Utility gas, LP NOTE: 7 main wire numbers. harness & push button start. IHS483 $219.99 Wiring Harness Kit (For Tractor6-volt systems IHS2274 $289.99 only) fits: Super H SN: 19234 & up w/ Wiring Harness Kit (For generator battery under seat & 4 terminal regulator systems only) fits: 300 Row-Crop IHS908 $205.50 Wiring Harness Kit (For 6-volt systems IHS2877 $289.99 Wiring Harness Kit (For generator & only) fits: M up to SN: 229910 w/ 3 regulator systems) fits: 350 Row-Crop terminal cut-out on the generator gas, LP, Replaces: 362011R91, 366314R91, IHS485 $205.95 Wiring Harness Kit (For 6-volt systems 366459R91 only) fits: M when converted to 4 terminal IHS2276 $289.99 Wiring Harness Kit (For generator regulator on generator systems only) fits: 400, (450 up to SN: IHS486 $219.95Steiner Wiring Harness Kit (For 6-volt systems 11083) gas Row-Crop only) fits: Farmall M SN: 229911 & up, IHS2879 $309.99 Wiring Harness Kit (For 12-volt generator Super M up to SN: F28174 & up to SN: & regulator systems) fits: 450 SN: 11084 & L504801 gas w/ battery & 4 terminal up gas, LP w/ 18 or 21 gallon tank regulator under fuel tank Replaces: 362011R91, 366459R91, IHS487 $219.95 Wiring Harness Kit (For 6-volt systems 368571R91 only) fits: (late Super M, SN: F28175 & IHS2881 $425.00 Wiring Harness Kit (For generator & up & L504802 & up), Super MTA ALL regulator systems) fits: 460, 560 gas, w/ battery under the seat & 4 terminal LP Row-Crop, Replaces: 370385R92, regulator 370437R92
300 STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm Restoration quality wiring harness kits Restoration quality wiring harness kits for generators - USA made cont... for alternators USA made cont...
Part # USD Description / Application Part # USD Description / Application IHS2889 $425.00 Wiring Harness Kit (For generator & IHS2921 $189.99 Wiring Harness Kit (For 1 wire 12-volt regulator systems) fits: 460, 560 diesel alternator) fits: A, Super A, B, BN series Row-Crop, Replaces: 370394R91, NOTE: Original style braiding w/ 375066R91, 376102R91 soldered terminals. Includes light wires IHS3543 $741.99 Wiring Harness Kit fits: Farmall 706, & diagram. 806 gas both w/ generators & fender IHS3005 $189.99 Wiring Harness Kit (For 1 wire alternator) mounted lights fits: C, Super C w/out fast hitch NOTE: Original style braiding w/ soldered terminals. Includes light wires & diagram. Junction blocks IHS2927 $219.99 Wiring Harness Kit (For 1 wire 12-volt Part # USD Description / Application alternator) fits: H, HV NOTE: Original IHS2933 $24.99 3 Terminal Junction Block fits as a tail style braiding w/ soldered terminals. light junction block: Cub SN: 210001 - Includes light wires & diagram. 224400, Cub LoBoy SN: 10001 - 18700; IHS2929 $232.99 Wiring Harness Kit (For 1 wire 12-volt Fits as a dash/cab junction block: 404 - alternator) fits:Inc.® M, MV, (Early Super 4366, Replaces: 371031R91, 378336R91 M up to SN: F28174 & L504801) gas, ((3) 10-32 studs, 3” c.c. mounting holes) IH/Farmall LP NOTE: Original style braiding w/ IH/Farmall
NOTE: See website for additional soldered terminals. Includes light wires Case IH applications. & diagram. IHS2244 $5.99 Junction Block fits as a light wire junction IHS3526 $249.99 Wiring Harness Kit (For 1 wire alternator block: Cub - W450; Fits as a glow plug conversion) fits: Late Super M SN: F28175 wire junction block: 340 - 706 & up & L504802 & up, Super MTA gas, LP Replaces: 42915D, 304314R91 parts Electrical IHS3801 $229.95 NOTE: See website for serial number Parts,Wiring Harness (For 1 wire alternator) breaks & full applications. fits: 100, 130
IHS3804 $229.95 Wiring Harness (For 1 wire alternator) fits: 200, 230 w/out fast hitch NOTE: Fast Restoration quality wiring hitch harness is available by special harness kits for alternators order. IHS3807 $289.95 USA made Wiring Harness Kit (For 1 wire alternator) NOTE: For tractors w/ ALTERNATORS, not fits: F300 Row-Crop regulators. Wiring harness kits have original style braiding and include headlight, wires IHS3810 $289.95 Wiring Harness Kit (For 1 wire alternator) and wiring instructions.Tractor All terminals fits: I300 Utility, early I350 Utility both are silver soldered and sealed. Wires are w/ original 7 wire main harness & push individually labeled for ease of installation. button start Additional alternator conversion harnesses IHS3813 $289.95 Wiring Harness Kit (For 1 wire alternator) available by special order. Call or email for fits: F400, (F450 up to SN: 11083) gas a quote. IHS3816 $415.50 Wiring Harness Kit (For 1 wire alternator) Part # USD Description / Application fits: 460 Row-Crop, 560 Row-Crop gas IHS3545 $160.99 Wiring Harness Kit (For 12-volt 1 wire IHS3548 $789.99 Wiring Harness Kit fits: Farmall 706, 806 mini alternator) fits: Cub SN: 501 - 115402 gas both w/ original 10DN alternator NOTE: Used w/ our ABC3551 alternator using external voltage regulator & fender & IHS2340 bracket kit. Steiner mounted lights (1966 & up) IHS3612 $176.99 Wiring Harness Kit (For 12-volt 1 wire IHS3552 $799.99 Wiring Harness Kit fits: Farmall 1206 w/ mini alternator) fits: Cub SN: 115403 - original 10DN alternator using external 165152 NOTE: Used w/ our ABC3551 voltage regulator alternator & IHS2340 bracket kit. IHS3555 $798.99 IHS3615 $199.99 Wiring Harness Kit (12-volt 1 wire mini Wiring Harness Kit fits: 766 diesel, 966 SN: alternator) fits: Cub SN: 165153 - 210000, 11684 & up, 1066 SN: 12510 & up, 1466 Cub Lo-boy SN: 501 to 10000 NOTE: Used SN: 10325 & up, 1468, 1566, 1568, Hydro w/ our ABC3551 alternator & IHS2340 100 (All w/ original 10SI alternator & flat bracket kit. top fenders)
STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com 301 Wiring harness grommets Cigarette lighters Part # USD Description / Application Part # USD Description / Application IHS843 $4.59 IHS1784 $24.95 12-volt Cigarette Lighter w/ Socket Amp Box Grommet fits: A, B, C, H, M & fits: 154 - 574, 606 - 1586, 3088 - 7488, Supers, I, O, W4, 6, 9 series gas, diesel Hydros 70 - 186, Cub Cadets 71 - 127 Replaces: 52062D Replaces: 1250545C1, 1265632C91, 378338R91, 378339R91, 378781R91, IHS2322 $8.95 Cab Electrical Grommet fits: 786, 886, 986, 382671R91, 382672R91, 393699R91 1086, 1486, 1586, 3088, 3288, 3488, 3688, (1.329” knob O.D.) NOTE: Black plastic 5088, 5288, 5488, Hydro 186 knob w/ the word ‘’LIGHTER’’ in white Replaces: 376254R1 USA made print. NOTE: 2 used per tractor; ABC1862 $29.95 6-volt Cigarette Lighter w/ Socket Sold individually. fits: 300 - Early 450 w/ 6-volt system Replaces: 363420R91, 367903R91 NOTE: Anodized aluminum knob Fuse holder engraved w/ the word “LIGHTER”. Fits: Cub - 4586 IHS949 $29.95 12-volt Cigarette Lighter w/ Socket Replaces: 354232R91, 365515R91, fits: 300, 330, 340, 350, 400, 450, 460, 560, 376852R91 USA made 600, 650, 660, W400, W450 (All w/ 12-volt Description Part # USD system), Replaces: Inc.®362000R91, 367904R91 Fuse Holder...... ABC389...... $10.95 NOTE: Anodized aluminum knob NOTE: Rated at 20 AMP). Fits in 1/2" hole. See website for full engraved w/ the word “LIGHTER”. applications.
Case IH Transmission switch IH/Farmall From a satisfied customer! Fits: 154 - 6788 Replaces: 3118643R1, 3106558R2, Parts,3129031R91, 376855R92, 392249R92, “Thanks for the fast shipping and great 529796R1, 530034R2, 65425C1, 91450C1 products!” - Erick E. Description Part # USD Transmission Pressure Sensor Switch...... ABC1605...... $16.50
Electrical parts Distributors vs. Magnetos A distributor requires a battery and coil to operate. A magneto is self sustaining, meaning it does not requireTractor a battery to operate and has a built-in coil.
Ignition parts Ignition parts cont... Part # USD Description / Application Part # USD Description / Application Coils, Brackets, Resistors Coils, Brackets, Resistors cont... IHS234 $56.50 ABC011 $19.99 6-volt Distributor Coil (O.E.M. style) fits: Cub - Early 450, Replaces: 353874R91 6-volt Distributor Coil & Mounting NOTE: 1.4 ohm rating. Bracket Fits: Cub - Early 400 Replaces: Delco 1115379, D502 IHS237 $56.99Steiner12-volt Distributor Coil (O.E.M style) NOTE: See website for full applications. fits: Cub - 650, Replaces: 353875R91 NOTE: 2.8 ohm rating between the two primary winding terminals. Requires an ABC509 $19.99 12-volt Distributor Coil (Metal Housing) & external resistor - use ABC366 resistor. Mounting Bracket fits: Cub & up (All w/ IHS842 $15.85 12-volt system), Replaces: Delco 1115380, Coil Bracket (For O.E.M style) 1115381, U505 NOTE: Internally resisted. fits: A - 650 using O.E.M style coil For horizontal distributors the mounting Replaces: 353889R1 holes must be elongated. See website for NOTE: Fits IHS234, IHS237. Zinc plated. full applications.
302 STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm Ignition parts cont... Ignition parts cont... Part # USD Description / Application Part # USD Description / Application Coils, Brackets, Resistors cont... Spark plug wiring sets - USA made cont... ABC4293 $52.50 FDS149 $12.99 Spark Plug Wiring Set w/ 90 degree Boots 6-volt Flame Thrower Coil (40000 volts) fits: 4-cyl. models except F12, I12, W12, fits: Cub - Early 400, Replaces: Delco O12, F14, O14, W14 NOTE: Copper 1115379, D502 USA made core w/ aluminum coating to prevent NOTE: See website for full applications. corrosion, waterproof neoprene. Cut to length. ABC348 $51.50 HOT Coil (55000-volts) fits: 12-volt ABC4309 $15.99 NEW! Spark Plug Wiring Set w/ 90 degree systems NOTE: Use w/ or w/out electronic Boots fits: 4-cyl. modelsNOTE: Graphite ignitions, Maximum voltage for faster carbon core w/ waterproof silicone outer starting, reduced plug fouling & longer jacket. Use w/ electronic ignitions. Cut to plug life. Must use w/ ABC366 resistor. length. ABC3161 $5.99 ACS228 $17.95 Spark Plug Wiring Set w/ Straight Boots Coil Bracket fits: Same as ABC011, fits: 4-cyl. models except F12, I12, W12, ABC509, ABC4293, ABC348 USA made O12, F14, O14, W14 NOTE: Copper core w/ aluminum coating to prevent corrosion, waterproof neoprene. Cut to ABC366 $8.99 Universal 12-volt Voltage Resistor Inc.® length. fits: IH / Farmall models ABC4291 $17.99 IH/Farmall NEW! Spark Plug Wiring Set w/ Straight IH/Farmall NOTE: Used to step down 12-volt Boots fits: 4-cyl. models except F12, I12, Case IH battery. 2 terminal style. Reduces voltage W12, O12, F14, O14, W14 NOTE: Graphite to distributor points. 2.0 Ohms of carbon core w/ waterproof silicone outer resistance. Resistor gets very hot. jacket. Cut to length. Use w/ electronic Spark plug wiring sets - USA made ignitions.
IHS801 $39.99 IHS2537 $27.99 Tailored Spark Plug Wire Set w/ Straight parts Electrical Spark Plug Wiring Set fits: F12, I12, W12, Parts,Boots fits: 460 - 856; Hydros: 70, 86 O12, F14, O14, W14 NOTE: Like original. Replaces: 278294R91 NOTE: Cooper Cotton braided wires w/ ring terminals. core w/ aluminum coating to prevent Tailored; copper core. corrosion, waterproof neoprene. See website for full applications. IHS1432 $41.99 Spark Plug Wiring Set fits the following w/ F4 magneto: Regular, F20, F30, T20, 10- IHS4325 $27.99 NEW! Spark Plug Wiring Set 20 NOTE: For models listed that include (Pre-assembled) w/ Straight Boots, 6-cyl. push in terminals on magneto cap. Like fits: Same as IHS2537, Replaces: 278294R91 original. Cotton braided wires w/ ring NOTE: Graphite carbon core w/ terminals. Tailored; copper core. waterproof silicone outer jacket. Use w/ electronic ignitions. See website for all IHS1428 $41.99 Spark Plug Wiring Set fits the following Tractor applications. w/ E4A magneto: Regular, F20, F30, T20, 10-20 NOTE: For models listed that use MFS2186 $31.50 Spark Plug Wire Set fits: Some B-250, threaded style terminals on magneto cap. B-275, B-276, Early 3414 w/ Lucas Like original. Cotton braided wires w/ distributor & BC144 engine up to SN: 6343 ring terminals. Tailored; copper core. Replaces: 3044219R93 NOTE: Set has threaded distributor & coil ends. Copper IHS799 $21.50 Spark Plug Wiring Set fits: Cub, A, B, core, waterproof neoprene tailored wires. C, H, M, Supers, I, O, T, W-4, 6 series ABC326 $21.50 gas, diesel, 100 thru 504 series (All w/ Spark Plug Wiring Set w/ 90 degree Boots Distributor or Magneto), Replaces: fits: 6-cyl. models (35” long wires) Steiner352951R91, 356689R92, 407487R1 NOTE: NOTE: Copper core w/ aluminum Pre-assembled. Tailored; copper core w/ coating to prevent corrosion, waterproof aluminum coating to prevent corrosion, neoprene. Cut to length. waterproof neoprene. ABC4300 $21.50 IHS4330 $21.50 NEW! Spark Plug Wiring Set fits: Same as NEW! Spark Plug Wiring Set w/ 90 degree IHS799 Replaces: 352951R91, 356689R92, Boots fits: 6-cyl. models (35” long wires) 407487R1 NOTE: Pre-assembled. NOTE: Graphite carbon core w/ Graphite carbon core w/ waterproof waterproof silicone outer jacket. Cut to silicone outer jacket. Use w/ electronic length. Use w/ electronic ignitions. ignitions. Cut to length. Ignition parts continue on next page
STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com 303 Ignition parts cont... Glow plugs Part # USD Description / Application Part # USD Description / Application
Spark plug wiring sets - USA made cont... IHS1604 $15.65 Glow Plug fits: 340, 460, 504, 560, 606, 656, ABC2863 $20.99 660, (706 w/ D-282); Industrials: TD340, 3514, 3616, 3800, 3850, TD-6 (62 series), Spark Plug Wiring Set w/ Straight Boots TD9 (92 series), TD9B (All w/ D166, 188, fits: 6-cyl. modelsNOTE: Copper core w/ 236, 282, 301” diesel engines) aluminum coating to prevent corrosion, Replaces: 304131R3, 343894R1, 343977R1 waterproof neoprene. Cut to length. (0.197” tip dia., 4.943” overall length & 0.311” O.D. where it slides into the head) ABC4296 $21.45 NOTE: Sold individually. Must use on NEW! Spark Plug Wiring Set w/ Straight 11-volts or less. Boots fits: 6-cyl. modelsNOTE: Graphite carbon core w/ waterproof silicone outer IHS4263 $13.99 NEW! Glow Plug fits: B250, B275, B276, jacket. Cut to length. Use w/ electronic B414, 238, 274, 354, 364, 374, 384, 424, 434, ignitions. 444; Industrial: TD5, TD5B, early 500, 2300A, 2424, 2444, 3414, 3444, 7000 ACS309 $29.99 Replaces: 710348R2 (M18 x 1.50 mm Spark Plug Cable Loom Bracket thread) NOTE: 4 used per tractor; Serviceable for Cub, Cub LoBoy 154, 184, Sold individually. 185, Replaces: 251426R1 USA made ABC4707 $17.99 NEW! Glow Plug fits:Inc.® 234, 244, 254; Case IH: 234, 235, 244, 245, 254, 255, 265, 275 ABC1807 $1.49 Replaces: 1273118C1 (M10 x 1.25 mm) Spark Plug Wire Grommet fits: Cub, Cub LoBoy 154, 184, 185; Also fits 154, 185 as a right front side sheet grommet for battery
Case IH cable & ignition wires Distributor, parts IH/Farmall Replaces: 127979, 37635R91 Know your distributor! IHC offered replacement Delco distributors for the stock IH distributor. See page 392B for a Spark plugs (Autolite) NOTE: Check spark plug specifications further explanation.Parts, before ordering as some models may use more than one type. Part # USD Description / Application ABC324 $5.49 Fits: Cub, Cub LoBoy, A, B, C, H, M & IHS1716 $294.95 Supers, I, O, T, W-4 & 6 series, 100, 130, 4-cylinder Horizontal IH Distributor 140, 154, 184, 185, 200, 230, 240, 300, 330, only (NEW not Rebuilt) fits: A, Cub - 504 340, 350, 400, 404, 424, 444, 450, 454, 460, series, 2404 - 3514 gas, LP, I, O, T, W4 - 6 464, 504, 544, 574, 674, 2400, 2424, 2444, series, Replaces: Casting 353898R11 2500, 3500, 3514 (Clockwise rotation) NOTE: Does not
Electrical parts include base or tachometer drive. ABC324 specifications: 18 mm thread, 1/2" reach, 7/8" hex, Autolite 3116, Plug Gap .025 IHS3112 $64.50 Distributor Drive Housing (USED, not ABC169 $8.49 Fits: F12, F14, F20, F30, Regular,Tractor O12, O14, New) w/ Opening for Tachometer Drive W12, W14, W30, W40, WK-40, Fairway 12, fits: Cub - 650 equipped w/ tachometer 14, W9, WR9, WR9S, 10-20, 15-30, 22-36 drive; Will also fit Letter series w/out ABC169 specifications: 7/8" x 18 thread, 5/8" reach, 15/16" hex, drive by ordering IHS3125 block off plate Autolite 3076, Plug Gap .025 Replaces: 363749R91, 363763R11 USA made NOTE: Use w/ IHS1716 ABC4088 $5.79 Fits: B250, B275, B276, B414, 354, 364, 434, distributor when replacing a magneto. 444, 2300A, 2444, 3414, 3444. All w/ BC144 Tachometer drive, housing, or block off British built engine plate sold separately. ABC4088 specifications: 14 mm thread, .472" reach, 13/16" hex, ABC4181 $10.95 Distributor Drive Housing Bushing Autolite 425, Plug Gap .025 Steiner fits: Cub - 650 (Same as IHS3112) ABC170 $4.49 Fits: 560, 606, 656, 660, 666, 686, 706, 756, (.630” I.D., .750” O.D., .970” long) 766, 806, 826, 856, 3616, Hydro 70, Hydro NOTE: Bushing may need sized after 86, T4, T5, T340; Crawlers: 500, 600 installation. ABC170 specifications: 18 mm thread, 1/2" reach, 7/8" hex, Autolite IHS3121 $8.85 386, Plug Gap .025 Tachometer Connection Housing Plate w/ Gasket fits: Cub - 650 (Same as ABC323 $4.49 Fits: 284 IHS1905), Replaces: 363817R1 (plate), ABC323 specifications: 14 mm thread, 3/4" reach, 13/16" hex, 363814R2 (gasket) USA made Autolite 405, Plug Gap .020
304 STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm Distributor, parts cont... IH distributor parts cont... Part # USD Description / Application Part # USD Description IHS3125 $8.50 ABC121 $12.45 Cap, Replaces: 351693R92 USA made Distributor Tachometer Drive Housing NOTE: For 560 order IHS947 cap. Block Off Plate w/ Gasket fits: Cub - 650 IHS739 $12.50 Cap Spring Clip, Replaces: 353894R1, (All w/out tachometer drive) 107384C1 Replaces: 363764R1, 363765R1 USA made IHS737 $7.50 Cap Spring Clip Bracket w/ Screw & Lock Washer, Replaces: 353895R1 (bracket), IHS2531 $7.69 Distributor Hold Down Clamp (For 5/16” 121832 (screw), 107386C1 hold down bolt) fits the following w/ (Screw size: 8-32 x 3/8”) IH horizontal distributor: A, B, C, H, M, IHS988 $7.55 Terminal Screw (For IH 4-cyl. distributors) Supers, I, O, W4, 6, 9 series, 100 - 504, (460 Replaces: 353907R1 - 856 w/ vertical distributor) Replaces: 353937R1 NOTE: 2 used per IHS1294 $3.99 Distributor Insulating Terminal Washer engine; Sold individually. See website (For IH 4-cyl. distributors) for full applications. Replaces: 251538R1 ABC2523 $7.69 Distributor Hold Down Clamp IHS974 $4.99 Spring Anchor Terminal Insulator (For 3/8” hold down bolt) fits: A, B, C, Replaces: 353906R11 H, M, Supers, I, O, W4, 6, 9 series (All IHS763 $13.20 Dust Cover w/ Gasket, Replaces: 353900R11 w/ Delco 1111411 vertical conversion Inc.® IHS703 $4.49 Rotor Button, Replaces: 353896R91 distributor) NOTE: 2 used per engine; IH/Farmall Sold individually. IHS370 $33.99 Ignition Tune-up Kit (Rotor, points, IH/Farmall condenser & spark plugs) Case IH (18 MM, 1/2” reach, 7/8” hex spark plug, Battery Ignition - 1939 through 79 except IH distributor parts 560) NOTE: Plug Gap .025, Point Gap .020. (For IH horizontal distributors only) IHS846 $19.95 Ignition Tune-up Kit (Rotor, point set & Electrical parts Electrical fits: Cub, Cub Loboys 154, 184, 185, A, B, C, H, M & Supers, condenser) Battery Ignition - 1939-79, (560 I, O, T, W-4, 6, 9 series gas, diesel, 100, 130, 140, 200, 230, 240, Parts,w/ 367839R92 or 371579R92 Distributor) 300, 330, 340, 350, 400, 404, 424, 444, 450, 504, (560 6-cyl.) 600, (For 504 only order IHS848) NOTE: Point 650 (4-cyl.); Industrials: 500 Crawler, T5, T340, TD14, TD14A Gap 0.020. IHS3166 $36.99 5-pc. Distributor Shaft Bushing & Shim Kit (2.006” length) USA made NOTE: Does not fit 560. IHS766 IHS815 ABC121 IHS739
Fits: 284 w/ T2T00479 (IH #1014242C91) distributor IHS737 IHS988 IHS1294TractorIHS974 Part # USD Description / Application ABC4143 $36.99 Ignition Tune-Up Kit fits: 284 NOTE: Includes points, condensor, and IHS763 IHS703 IHS370 IHS846 rotor. Point gap 0.016 to 0.020.
ABC4124 $95.99 Complete Ignition Tune-Up Kit fits: 284 NOTE: Includes cap, points, condenser, IHS3166 rotor, spark plugs (AL405), and wires. Point gap 0.016 to 0.020. IH distributorSteiner parts For the above tractors using IH 353898R11 - Horizontal Distributor only. See page 392B to identify an IH distributor. Will not fit Delco or Prestolite: (For Autolite distributor w/ original Part # USD Description round rotor) fits: 154, 184, 185, 454, 464, IHS766 $29.95 Drive Gear, Replaces: 353902R1, 531461R1 544, 574, 674; Industrials: 2400A, 2400B, NOTE: Drive pin hole through both sides 2405B, 2410B, 2412B, 2544, 3400A, 3514 like original. Description Part # USD IHS815 $29.99 Drive Shaft, Replaces: 353934R11 NEW! Ignition Tune-Up Kit w/ Rotor...... ABC4423...... $19.99
STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com 305 Lucas distributor parts 6-cylinder IH distributor parts cont... Part # USD Description / Application Part # USD Description ABC2633 $34.95 Distributor Cap (For Lucas Distributor) IHS703 $4.49 Rotor Button, Replaces: 353896R91 Fits: Some B-275, B-276, Early B-414, NOTE: Will not fit Delco or Prestolite. Early 3414 w/ Lucas distributor & BC-144 IHS947 $14.15 Distributor Cap, Replaces: 368062R91 engines up to SN: 6343 USA made NOTE: Will not fit Delco or Replaces: 3047513R1 NOTE: Cap is Prestolite. Will not fit 504 - order ABC121 threaded for spark plug wire ends. cap. ABC4490 $7.99 NEW! Rotor fits: B275, B414, B434, 354, IHS988 $7.55 Terminal Screw (For IH 6-cyl. distributors) 364, 384, 424, 444, 2424, 2444, 3414, 3444 Replaces: 353907R1 (All w/ Lucas distributor) IHS1294 $3.99 Distributor Insulating Terminal Washer Replaces: 3047514R1 (For IH 6-cyl. distributors) ABC4415 $19.99 NEW! Condenser (For use w/ Lucas Replaces: 251538R1 distributor & clip held cap) fits: B250, IHS848 $26.99 Ignition Tune-up Kit (Rotor, point set & B275, (B414 up to SN: 5885) condenser) fits: 460 - 856, (For 560 only Replaces: 702325R91 order IHS846) NOTE: Point Gap .020; Will not fit Delco or Prestolite. Delco distributor parts Inc.® (For LATE Delco Distributor w/ screw held cap) Delco conversion distributor parts fits: Some 454, 464, 544, 574, 674, 2400, 2500 series using (For Delco 1111411 Vertical distributor only) fits: Some A, B, Delco screw held cap, Replaces: Delco 1960833 C, H, M & Supers, I, O, T, W4, W6 series gas, LP only NOTE: Fits Delco distributors 1112477, 1112489, 1112697. Case IH IH/Farmall ABC141 ABC2428 ABC333 ABC498Parts,ABC500 ABC276 ABC488L Part # USD Description ABC141 $11.99 Distributor Cap (4-cyl.) (For LATE Delco
Distributor w/ screw held cap) ABC488S ABC3007 ABC511 ABC514 ABC2428 $15.99 Dust Cover (For Delco w/ screw held cap) ABC333 $12.50 Ignition Tune-Up Kit (For Delco-Remy systems w/ screw held cap) fits: Some 454, 464, 544, 574, 674, Replaces: 19545587, ABC520 ABC186 ABC018 ABC3978 Electrical parts 1954566, 1956007, 1962640 USA made NOTE: Kit includes heavy duty point set, vibration resistant condenser,Tractor rotor; Point gap .025. ABC556
Delco conversion distributor parts 6-cylinder IH distributor parts For the above tractors using Delco 1111411 - Vertical Distributor w/ round insulating terminal. See page 392B to Fits: 460, 504, (560 except tune-up kit), 606, 656, 660, 706, 756, identify an IH distributor: 806, 826, 856 & 3616 & most 6-cyl. gas Combines w/ clip Part # USD Description held cap ABC498 $14.99 Terminal Insulator Assembly (Round style) (For Delco distributor) Steiner NOTE: Fits Delco distributor housings only w/ .345” dia. round hole IHS763 IHS703 IHS947 IHS988 IHS1294 IHS848 ABC500 $14.99 Terminal Insulator Assembly 6-cylinder distributor parts (Square style) (For Delco distributor) For the above tractors using IH Distributor. See page 392B to NOTE: Fits Delco distributor housings identify an IH distributor. Will not fit Delco or Prestolite: only w/ .300” dia. round hole. Part # USD Description ABC276 $10.69 IHS763 $13.20 Dust Cover w/ Gasket, Replaces: Distributor Cap (4-cyl.) (For EARLY Delco 353900R11 NOTE: Will not fit Delco or distributor w/ clip held cap up to 1963) Prestolite.
306 STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm Delco conversion distributor parts cont... Electronic ignition conversion kits Part # USD Description USA made cont... ABC488L $11.95 Distributor Cap Spring Clip w/ Bracket Part # USD Description (31/32" (For Delco distributor w/ clip held cap) EIGN17 $149.99 Electronic Ignition Conversion Kit Bracket) ABC488L: Replaces: 1889967, 1889999 (For 12-v negative ground system) (bracket) fits: Same as EIGN05 NOTE: Must use ABC488S $11.95 ABC488S: Replaces: 1889967, 1847289 (11/16" w/ ABC348 high voltage coil, ABC366 (bracket) (11/16” long bracket) Bracket) resistor, & IHS4330 spark plug wires. NOTE: Fits Delco only. EIGN29 $154.99 Electronic Ignition Conversion Kit ABC3007 $24.99 Delco Distributor Shaft Bushing & Shim (For 12-v negative ground system) Kit, Replaces: 810074, 810078, 811912, fits: 460, 560, 606, 656, 660, 666, 686, 706, 1909003 (0.486” I.D., 0.656” O.D., 2.867” 756, 766, 806, 826, 856, Hydro 70, Hydro 86 length) USA made NOTE: Bushing must (All w/ distributor 107310C91, 372986R91, be sized to shaft after installation. 380892R92, 388535R91, 393396R91, ABC511 $14.59 Distributor Tag w/ (2) Rivets fits: Tractors 398157R91, 399596R91, 399597R91 & (6-volt) & Industrial using Delco Remy distributor distributor housing 368051R11) (2.5” length, .800” wide, .150” dia. rivet NOTE: Must use w/ ABC348 high voltage ABC514 $14.59 hole, 2” c.c. rivet holes) USA made coil, ABC366 resistor & IHS4325 spark (12-volt) NOTE: Stamped w/ raised letters. plug wires. Customer must stamp numbers. EIGN01 $154.99 Inc.® Electronic Ignition Conversion Kit ABC520 $3.99 Rotor Button (For Delco-Remy distributor (For 6-v positive ground system) fits: A, B, IH/Farmall IH/Farmall
w/ clip held cap) H, M, I, O, T, W4, 6 series when converted Case IH to Delco upright distributor 1111411 ABC186 $8.99 Dust Cover w/ Felt, Gasket & Washer NOTE: Must use w/ ABC4293 high (For Delco-Remy w/ clip held cap) voltage coil & IHS4330 spark plug wires. ABC018 $11.49 Ignition Tune-Up Kit w/ Rotor (For Delco EIGN19 $149.99 Distributors w/ clip held cap through Electronic Ignition Conversion Kit Electrical parts Electrical 1963) NOTE: Kit includes points, (For 12-v negative ground system) condenser, rotor; Point gap .020. Parts,fits: Same as EIGN01 NOTE: Must use w/ ABC348 high voltage coil, ABC366 ABC3978 $4.95 Ignition Points (For Delco Distributors resistor & IHS4330 spark plug wires. w/clip held cap through 1963) NOTE: Point gap .020. EIGN24 $134.99 Electronic Ignition Conversion Kit ABC556 $2.75 Distributor Mounting Gasket (For 12-v negative ground system) Replaces: 55780DD, 55780DE USA made fits: 454, 464, 544, 574, 674 (All w/ Delco distributor 1112477, 1112489, 1112697 w/ screw held cap) NOTE: See website for all applications. Must use w/ ABC348 Electronic ignition high voltage coil, ABC366 resistor & conversion kitsTractor - USA made ABC4291 spark plug wires. Precisely engineered breakerless ignition delivers twice the energy of conventional systems. No points to burn, pit or corrode. Fits entirely inside the distributor and backed by a manufacturer 30 month limited warranty. Kits require a higher voltage coil From a satisfied customer! and graphite carbon core spark plug wires - available separately. “Thanks to all the staff for their fast and Part # USD Description / Application friendly service. I received my order and I EIGN05 $154.99 SteinerElectronic Ignition Conversion Kit am excited to get back to completing some (For 6-v positive ground system) fits: Cub, A, B, C, H, M, Super A - MTA, I, projects. Everything was professionally O, T, W-4, 6 series gas, LP, 100, 130, (140 packaged and exactly as ordered. Thank up to SN: 26744), 200, 230, 240, 300, 330, you.” - David A. 340, 350, 400, (450 up to SN: 11083) (All w/ 353898R1 IH horizontal distributor) NOTE: Must use w/ ABC4293 high voltage coil & IHS4330 spark plug wires. See website for all applications.
STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com 307 WICO magneto, parts (O.E.M.) IHC H4 magneto parts cont... - USA made Part # USD Description Part # USD Description / Application F4 $10.85 Condenser, Replaces: 21409D, XH1344 $439.95 WICO Magneto (Model XH1344) CONDENSOR 21409DA NOTE: Power units: U2 to fits: A, B, C, H, M & Supers, I, O, T, UD14. W-4, 6, 9 series, 100, 130, 200, 230, IHS3528 $7.99 Point Set, Replaces: 353171R91 300, 350, 400, 450, 600, 650 gas Power NOTE: Point Gap .013”. Units: U2 to U6 gas IHS3533 $9.99 Rotor, Replaces: 47425DY (Clockwise rotation) F4COIL $66.99 Coil ABC122 $16.69 Cap, Replaces: 47413DYC NOTE: Power units: U2 to UD14. IHS1904 $10.59 Cap Spring Clip, Replaces: 51666D (1.923” tall, 0.315” wide, 0.550” long) FXH2100B FXH2024 FXH2403 FXG2002A-2 NOTE: 2 used per tractor; Sold individually. ABC482 $26.99 Coil Cover w/ IHC logo Replaces: 47449DAY NOTE: PowerInc.® units: U2 to UD14. FXG1008 ABC556 MAG6
The following parts will fit the XH1344 Magneto:
Part # USD Description IHC F4 & F6 magneto parts Fits: Some 22-36, W-40; some I, O, T, W4 - 9 series; FXH2100B $14.95 Points Industrials: TD6 - TD18
Case IH FXH2024 $15.95 Condenser IH/Farmall FXH2403 $62.50 Coil FXG2002A-2 $62.50 Cap Parts, FXG1008 $34.75 Rotor F4 POINTS F4COIL F4 CONDENSOR IHS3528 IHS3533 ABC556 $2.75 Mounting Gasket The following parts will fit the IHC F4 & F6 Magnetos:
MAG6 $14.50 WICO XH & XHD Magneto Service Part # USD Description (Instructions and Parts List) (1959) F4 POINTS $21.99 Points, Replaces: 21367D USA made NOTE: Point Gap .013. F4COIL $66.99 Coil, Replaces: 21401D, 21401DAX,
Electrical parts IHC H4 magneto parts 57926DX USA made Fits: A, B, C, H, M, Supers, I, O, T, W-4, 6, 9 - TD14 series, F4 $10.85 Condenser, Replaces: 21409D, 100, 130, 200, 230, 300, 350, 400, 450, 600, 650; CONDENSOR 21409DA Power units: U2 - UD14 Tractor IHS3528 $7.99 Point Set fits: Some F-12, F-20, F-30 (All using F4 magneto) Replaces: 353171R91 NOTE: Point Gap (F4) .013”, (F6) .020”. ABC486 ABC556 ABC120 F4 CONDENSOR IHS3528 IHS3533 $9.99 Rotor fits: Some F-12, F-20, F-30 (All using F4 magneto) Replaces: 47425DY
IHS3533 SteinerF4COIL ABC122 IHS1904 ABC482 The following parts will fit the IHC H4 Magneto: From a satisfied customer!
Part # USD Description ABC486 $8.95 Gasket Set “Thank you for the very fast service ABC556 $2.75 Mounting Gasket and shipping, as well as the excellent ABC120 $21.50 Ignition Tune-Up Kit (Rotor, points, communication. I truly appreciate your time condenser) NOTE: Point Gap .(F4) and effort.” - Michael W. .013, (F6) .020; Power units: U2 to UD14.
308 STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm IHC J4 magneto parts Generator parts cont... Fits: Cub, Cub Lo-Boy Part # USD Description / Application Generator Pulleys cont... IHS1701 $47.50 2-pc. Adjustable Generator Pulley Fits the following: H, M, MTA, Super J4 POINTS F4 CONDENSOR J4 CONDENSOR J4 COIL series; I4, I6, I9, O4, O6, O9, W4, W6, W9 gas, LP, Early 300, (400, 600, 650 gas, LP) w/ generators 1101355, 1101423, 1100501, Replaces: 6745D, DA, 6746D, DA ABC121 IHS1904 IHS1492 J4 ROTOR Generator Belts ABC099 $8.99 Fits: Cub up to Engine SN: 165152 Replaces: 351321R1 (1/2” x 20) IHS1166 IHS988 IHS974 IHS1294 ABC100 $10.99 Fits: Cub Engine SN: 165153 & up, The following parts will fit the IHC J4 Magneto: Cub LoBoy, Replaces: 358213R1 Part # USD Description (1/2” x 22) NOTE: Will not fit 154, 184, 185. J4 POINTS $8.19 Point Set, Replaces: 353172R91 NOTE: Point gap 0.013”. ABC103 $10.95 Fits: A, SuperInc.® A, A1 up to SN: 317191, B, C, Super C up to SN: 114645 F4 $10.85 F4 Condenser fits: J4 magneto up IH/Farmall Replaces: 49291D IH/Farmall CONDENSOR to SN: 81410, Replaces: 354136R92, (1/2” wide x 24-1/4” long) Case IH 373892R91 ABC104 $12.49 Fits: Super A, A1 SN: 317192 & up, J4 $8.49 J4 Condenser fits: J4 magneto SN: Super C SN: 114646 & up, 100, 130, CONDENSOR 81411 & up, Replaces: 353903R92 200, 230; Also fits the following J4 COIL $79.99 Coil, Replaces: 352355R91, 396531R1 diesels: ID6, MD, Super MD, SWD6, ABC121 $12.45 Cap, Replaces: 351693R92 USA made WD6, 400, 450, W450 parts Electrical Parts,Replaces: 52318DA (1/2” x 26-3/4) IHS1904 $10.59 Cap Spring Clip, Replaces: 51666D IHS235 $9.99 (1.923” tall, 0.315” wide, 0.550” long) Fits: H, Super H, W4, Super W4, I4, 3414 424, 600, 650, 2424, 3414 NOTE: 2 used per tractor; Replaces: 48878D (1/2” x 30-1/4”) Sold individually. IHS1246BELT $11.99 IHS1492 $49.95 Top Cover / Coil Cover w/ Gasket Replaces: 251502R11 Fits: H, Super H, W4 alternator only J4 ROTOR $41.99 Rotor, Replaces: 351692R91 IHS1166 $13.59 J4 Magneto Gasket Set ABC3443 $8.95 IHS988 $7.55 Terminal Screw fits: J4 magneto SN: Fits: 300, 350 gas, LP, diesel w/ 139748 & up, Replaces:Tractor 353907R1 factory generator, Replaces: 362828R1 IHS974 $4.99 Insulator fits: J4 magneto SN: 139748 (1/2” x 33-1/8”) & up, Replaces: 353906R11 IHS1294 $3.99 Magneto Insulating Terminal Washer IHS141 $12.49 Fits: M, Supers, I, O, T, W6 series, Replaces: 251538R1 400, 450 gas; Also fits the following diesels: 444, 2444, Replaces: 49341D (1/2” x 33-1/4) Need fan belts? See page 288 Generator Bands, Kits, Tags ABC1207 $17.95 Generator Commutator (Brush) Band Generator parts Cover (For 4-1/2” O.D. Delco Starter PartSteiner # USD Description / Application Housing) fits: Cub - WD9, 100 - 450 Generator Pulleys Replaces: 1872638 (1-5/8” wide) USA made NOTE: Stainless steel. IHS1699 $42.95 Generator Pulley fits the following ABC4175 $16.50 using a 1-1/4” exposed generator Generator Bearing, Brush & Bushing shaft: Super A SN: 317192 & up, C Kit fits: Cub, A, B, C, H, M, W4, W6, SN: 47126 & up, 100, 130, 200, 230; W9, Supers, 100, 130, 200, 300, 350 Fits the following gas: Early 300 - 450; gas, 400 gas, 450 gas (All w/ Delco Fits generators 1100531, 1100996 1100501, 1100531, 1100532, 1100534, Replaces: 363366R1 (3” O.D., 2.104” 1100535, 1100536, 1100537) long) NOTE: Improved ductile iron. Generator parts continue on next page
STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com 309 Generator parts cont... Voltage regulators cont... Part # USD Description / Application Part # USD Description / Application Generator Bands, Kits, Tags cont... ABC152 $32.95 6-volt (4-Terminal) Voltage Regulator ABC4164 $18.95 Generator Bearing, Brush & Bushing (Base Mount) fits: Cub, Cub LoBoy, Super Kit fits: Cub, A, B, C, H, M, W4, W6, A, C, Super C, H, Super H, M, Super M, W9, Supers, 100, 130, 200, 230 (All w/ Super MTA, I4, I6, I9, O4, W4, W6, W9, generators 946M, 1100504, 1100505, WR9, 100, 130, 140, 200, 230, 240, 300, 1100506, 1100508, 1100509, 1100516, 330, 340, 350, 400, 450 (All w/ generator 1100517, 1100523, 1100529, 1100530, 1100055, 1100501, 1101377, 1101851, 1101354, 1101355, 1101356, 1101357, 1101852, 1101853, 1101854, 1101855, 1101358, 1101369, 1101371, 1101373, 1101856, 1101857, 1101858) 1101379, 1101382, 1101383, 1101384, Replaces: 121578C1, 354234R91, 360898R1, 1101385, 1101390, 1101391, 1101392, Regulator D657, 1116807, 1116816, 1118291, 1101393, 1101397, 1101398, 1101401, 1118308, 1118780, 1118982, 1119575 1101404, 1101411, 1101413, 1101414, ABC188 $45.55 1101415, 1101416, 1101417, 1101419, Voltage Regulator Conversion Kit 1101421, 1101422, 1101423, 1101425, fits: IH models w/ original cut-out to 1101426, 1101430, 1101657, 1101851, update to a voltage regulator 1101852, 1101853, 1101854, 1101855, USA made 1101857, 1101858, 1101860) Inc.® ABC155 $34.95 ABC511 $14.59 (6-volt) Generator Tag w/ (2) Rivets 12-volt (3 Terminal) Voltage Regulator fits: Tractors & Industrial using Delco (Saddle Mount) fits: 154, 185 Remy generator (2.5” length, .800” Replaces: Delco 1118991 wide, .150” dia. rivet hole, 2” c.c.
Case IH ABC514 $14.59 rivet holes) USA made IH/Farmall (12-volt) ABC185 $32.95 NOTE: Stamped w/ raised letters. 12-volt (4 Terminal) Voltage Regulator Customer must stamp numbers. (Base Mount) fits: Cub SN: 221293 - 248124, Parts,Cub Cadet 70, 100, Cub LoBoy SN: 16398 & up (not 154), MD, (140 SN: 26801 & up), 460, 560, 600, 650 (All w/ 12-volt generator 1100356, 1100394, 1100395, 1100401, Voltage regulators 1100409), Replaces: 376122R91, 121577C1 NOTE: Cut-out relay has two terminals on one side & one ABC1148 $32.95 12-volt (4-Terminal) Voltage Regulator terminal on the other side. Regulator has three terminals on (Base Mount) fits: Hydro 100, 444, 504, 544, one side & one terminal on the other side or bottom. See page 606, 656, 664, 706, 756, 766, 806, 826, 856,
Electrical parts 392B for a further explanation. 966, 1026, 1066, 1206, 1256, 1456, 1466, 1468,
Part # USD Description / Application 2444, 2504, 2544, 2656, 2706, 2756, 2806, 2826, 2856, 3800, 3850, 4156, 21026, 21206, IHS1258 $99.95 Cut-out Relay Assembly (Saddle mount, Tractor 21256, 21456 (All w/ factory alternators), 2 terminal replaces original 3 terminal cut Replaces: 65304C1, 65302C1, 384988R91 out) fits: Farmall Cub up to SN: 115402, IH Cub LoBoy up to SN: 16397, A, AV, Super A up to SN: 345198, B, BN, C up to SN: 47125, H up to SN: 340953, I4, I6 up to SN: Alternators, parts 36785, I9, M up to SN: 229910, Early O4, NOTE: Alternators are NEW not rebuilt • To convert OS4, O6 up to SN: 29473, OS6 up to SN: 6-volt to 12-volt system. For negative ground systems. 29473, Early W4, W6 up to SN: 29473, W9 up to SN: 48740, Replaces: 46412D, Delco Part # USD Description / Application 1116766 USA made NOTE: This is a 2 ABC3551 $149.95 Mini 35 Amp Alternator w/ Pulley Steinerterminal cutout that replaces the original fits: Cub, Cub LoBoy using IHS2340 3 terminal cutout. Only fits tractors bracket kit (4-1/2” housing dia., equipped w/ lights. 2-3/4” pulley O.D., 1/2” belt width) ABC153 $32.95 6-volt (4 Terminal) Voltage Regulator NOTE: For 12-volt negative ground (Saddle Mount) fits: Cub, Cub LoBoy, A, systems only. Simple 1 wire alternator Super A, B, C, H, M, I, O, T, W-4, 6, 9 series hook up: Run a wire from the gas using generator 1101423, 1101355 alternator through the ammeter to Replaces: 46412D, Delco 1116766, 1116809 positive side of battery. Must rev the NOTE: Provides 2-unit positive ground engine to 800 - 850 RPM in order to generator mounted regulator. self-excite. Includes instructions.
310 STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm Alternators, parts cont... Alternators, parts cont... Part # USD Description / Application Part # USD Description / Application ABC2315 $34.95 IHS829 $34.95 Alternator Bracket Kit fits: M, MV (both Alternator Pulley (For ABC3551) w/ SN: 63325 & up), Super M, MTA, O6 (0.587” I.D., 1.437” o/a length, 3” pulley SN: 7027 & up, W6 SN: 7068 & up, 400, O.D., 5/8” belt width) W400, 450, W450 NOTE: Used when switching from a generator to ABC418 ABC418 $99.95 63 Amp Alternator w/ Pulley Alternator. To fit earlier serial number fits: IH models except for Cub series tractors customer must modify or (6-1/4” housing dia., 2-1/2” pulley delete top radiator brace. O.D., 5/8” belt width) NOTE: For 12- ABC404 $34.95 volt negative ground systems only. Universal Mounting Kit fits: IH models NOTE: Used when switching from a Simple 1-wire alternator hook up: generator to an alternator. Does not Run a wire from alternator through include top adjusting bracket. May ammeter to positive side of battery! have to be drilled or modified for your Must rev engine to 800 - 850 RPM in application. order to self excite.
ABC1426 $19.95 ABC529 $23.50 Universal Top Adjusting Bracket fits: IH models (7/8” wide, 1-1/2” offset, Pulley only (For ABC418) Inc.® 8-1/4” from farthest end of slot to center (.670” shaft dia., 3-3/16” pulley O.D., of mounting hole, 3-3/4” slot length, IH/Farmall 1/2” belt width) IH/Farmall
3/8” mounting hole) NOTE: Customer Case IH may need to trim to fit some models. ABC495 $20.55 IHS960 $38.95 Alternator Shield fits: 544 gas, Farmall 656 gas up to SN: 47397, IH 656 gas up Pulley only (For ABC418) to SN: 14794, Farmall 706 SN: 37237 (.670” shaft dia., 2-1/2” pulley O.D., & up, IH 706 SN: 5274 & up, 756 gas, parts Electrical 5/8” belt width) Parts,Farmall 806 SN: 33163 & up, IH 806 SN: 7101 & up, 826 gas, 856, 1026, Farmall IHS2340 $39.95 Alternator Bracket Kit fits: Cub, Cub 1206 SN: 11793 & up, IH 1206 SN: 8384 LoBoy NOTE: Use w/ ABC3551 & up, Replaces: 396360R1, 396360R2 alternator only. Can use existing belt, USA made (the belt will ride over the pulley but still work) OR order ABC2315 pulley for wider belt width. Direct bolt on, no cutting on hood! Starter, parts IHS2349 $49.99 Alternator Bracket Kit fits: A, B, C, Part # USD Description / Application Supers, 100, 130, 200,Tractor 230 (All w/out Manifold Heaters cultivators) NOTE: Use w/ ABC418 ABC4218 $12.75 alternator & existing belt. Diesel Intake Manifold Heater / Thermostart, Glow Plug fits the IHS1246 $52.50 Alternator Bracket Kit fits: I4, O4, OS4, following using straight spade electric Super H, Super W4 gas, LP; H SN: connector: 395 - 995, 3220, 3230, 4210, 125250 & up gas, LP; W4 SN: 5864 & 4230, 4240, 5120, 5130, 5140, 5150, C50 - up gas, LP USA made NOTE: Allows C100, CX50 - CX100, MX80C - MX170; use of ABC418 alternator to mount IND: 40XT, 60XT, 70XT, 75XT, 85XT, under hood w/ out cutting hood. The 90XT, 95XT, 485, 585, 685, 785, 885 up to Steinerbelt that is included will not work for SN: 3083, Replaces: 31189299R1, A77616 300 & 350. To fit earlier serial number ABC4232 $19.99 tractors customer must modify top Diesel Intake Manifold Heater / radiator brace for alternator clearance. Thermostart, Glow Plug fits: Case IH JX55, JX60, JX65, JX70, JX70U, JX75, IHS1246BK $44.99 Alternator Brackets only (For IHS1246) JX80, JX80U, JX85, JX90, JX95, JX100U fits: 300, 350, I4, O4, OS4, Super H, Super Replaces: 5093612, 5161845 W4 gas, LP; H SN: 125250 & up gas, LP; (Eyelet terminal, 7/8” UNF mounting W4 SN: 5864 & up gas, LP USA made thread, 3/8” UNF fuel line thread) NOTE: Use w/ ABC418 alternator. Starter, parts continue on next page
STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com 311 Starter, parts cont... Starter, parts cont... Part # USD Description / Application Part # USD Description / Application Starter Solenoid Relay Assemblies Starter, parts cont... ABC138 $31.50 ABC507 $24.95
12-volt Solenoid Switch (3 Post Saddle Starter Drive Spring only (For ABC458) Mount) fits: 140, 300 LP, 350, 400 LP Replaces: 1860639 USA made Replaces: Delco DR1467, 1114545
IHS132 $46.99 ABC1366 $39.99 12-volt Starter Solenoid (4 Terminal) Starter Drive (Bendix) fits: Same as (For 30, 35 MT series Delco starters) ABC458, Replaces: 1868804 fits: Late 350, 450 LP, 400, 450 diesels, NOTE: Improved positive style. W400, W450 gas, diesel, 600, 650 gas, 10 teeth. diesel; Fits the following diesels: 454, 544, 560, 574, 656, 660, 684, 706, 756, IHS1292 $54.99 Starter Drive Housing fits: A - M, (Super 806, 826, 856, 1206, 1256, 1456, Early 766 H up to SN: 19233), Super M SN: F501 to - 1568, Early 4166, Replaces: 65479C2, F28174 & L500001 to L504801, I, O, W4, 585618C91 6 series, 100, 130, (140 up to SN: 26800), ABC1179 $21.95 12-volt Starter Solenoid (3 Terminal) 200, 230, 240 (w/ 2 bolt nose) (For Delco starters) fits: 424, 444, 460, Replaces: Delco: Inc.®1878661, 1887109, 464, 504, 606, 674, 3414 gas, diesel, LP 1910093, 1943759, For starters: 1107021, (All w/ Delco starter); 3514, 3616; 340 1107060, 1107067, 1107093, 1107174, diesel w/ starter 1108657; 350; 666, 1107427, 1107448, 1108096 NOTE: No returns if broken. 686 synco w/ starter 1109252; Fits the following gas: 404, 454, 544, 560, 574, ABC1939 $18.99 Starter Commutator (Brush) Band Cover
Case IH 656, 666, 686, 706, 756, 766, 806, 826, 856, (For 3-3/4” O.D. Delco starter housing) IH/Farmall Hydro 70, Hydro 86, Replaces: 65478C1, fits: Cub up to SN: 224400, Cub LoBoy 594185C1 up to SN: 18700 both using Delco starter ABC508 $5.75 Parts,1109603, 1109613, Replaces: 1887889 Starter or Solenoid Terminal Repair Stud USA made NOTE: Stainless steel. (For tractors using 5/16” x 18 NC starter terminals) NOTE: Brass. ABC1203 $18.95 Starter Commutator (Brush) Band Cover ABC506 $5.75 Starter or Solenoid Terminal Repair Stud (For 4-1/2” O.D. Delco starter housing) (For tractors using 5/16” x 24 NF starter fits: A - W6, 100 - (560 LP) terminals) NOTE: Brass. Replaces: 1886923 (1-3/16” wide) USA made NOTE: Stainless steel. Starter, parts Electrical parts IHS244 $189.99 BACK IN STOCK! Starter w/ Drive ABC1435 $18.95 Starter Commutator (Brush) Band Cover (Bendix) (For tractors w/ threaded stud (For 5” O.D. Delco starter housing) for battery cable) fits: TractorH, HV up to SN: fits: MD & Supers, ID6, ID9, OD6, TD6, 391357, I4, W4, O4, M, Early Super M TD9 4-cyl., WD6, WD9 & Supers, 400 up to SN: F28174 & L504801, MV, I6, T6, diesel, 450 diesel, 460 diesel, 560 diesel, W6, Super W6 up to SN: 3950, O6 (600, 650 gas, diesel), 660 diesel (All gas w/ 2 bolt nose cone) Replaces: 1880355, 1889664 Replaces: 1107427, 1107448 NOTE: No (1-3/4” wide, 5” O.D.) USA made returns if nose cone is broken. NOTE: Stainless steel. ABC458 $41.50 Starter Drive (Bendix) fits: A, B, C, H, M, ABC547 $43.79 Starter Drive (Bendix) fits: Farmall Cub Supers, I, O, T, W4, 6 series gas (except up to SN: 224400, Cub LoBoy up to T6), 100, 130, (140 up to SN: 26800), 200, SN: 18700 w/ starter 1109603, 1109611, Steiner230, 240, 300, 330, 340, 350, 400, 450 gas; 1109613, T6 w/ starter 1107435 Services the following Delco starters: Replaces: 1858522, 1850844 1107021, 1107060, 1107067, 1107093, NOTE: Original spring style. 10 teeth. 1107169, 1107174, 1 107408, 1107412, ABC4225 $15.95 1107427, 1107444, 1107448, 1107491, 1107886, 1108012, 1108016, 1108038, Starter Brush & Bushing Kit 1108041, 1108080, 1108093, 1108096, fits: Cub, Cub LoBoy both w/ Delco 1108097, 1108098, 1108173, 1108174, 1109603, 1109611, 1109613 1108185 NOTE: Original spring style. 10 teeth.
312 STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm Starter, parts cont... Starter, parts cont... Part # USD Description / Application Part # USD Description / Application Starter, parts cont... Starter, parts cont... ABC4201 $12.29 Starter Brush & Bushing Kit ABC511 $14.59 fits: A, B, BN, C, H, M, W4, W6, W9, (6-volt) Supers, MTA, F12, F14, W30, WK40, Starter Tag w/ (2) Rivets fits: Tractors & 100, 130, 140, 200, 230, 240, (F300 w/ Industrial using Delco Remy starter 6-volt system), 330, 340, (400 w/ 6-volt (2.5” length, .800” wide, .150” dia. rivet system), 450 up to SN: 11083 (All gas ABC514 $14.59 hole, 2” c.c. rivet holes) USA made w/ Delco 736C, 737G, 1107021, 1107060, (12-volt) NOTE: Stamped w/ raised letters. 1107067, 1107092, 1107093, 1107169, Customer must stamp numbers. 1107238, 1107322, 1107328, 1107404, 1107408, 1107412, 1107427, 1107435, 1107444, 1107448, 1107462, 1107491, Push Button Switches, parts 1107886, 1107926, 1108012, 1108016, ABC012 $12.59 Manual Starter Switch (Saddle Mount) 1108038, 1108080, 1108092, 1108093, fits: Cub, Cub LoBoy, A, B, C, Supers, 1108097, 1108098, 1108185 Super H, Super M, MTA, Super W6, W9, NOTE: See website for all applications. Super WD6, WD-9, WR-9, WDR-9, 100, ABC4197 $61.50 Starter Armature fits: A, B, C, H, M, 130, 140, 200, 230; W9, WR-9S, WD-9 Supers, F12, F14, MTA, I, O, W4, 6, Supers usingInc.® starter 1108925, 1108943 Supers, W12, W14, W30, W40, 100, 130, Replaces: Delco 1918405, 1919600 IH/Farmall 140, 200, 230, 240, 300, 330, 340, 350, 400, (2 mounting holes, .190” I.D., 1-3/8” IH/Farmall Case IH 450, W400, W450; Industrials: T4, T5, T6, centers) NOTE: Will not fit Autolite T6-61, T340 (All gas, LP w/ Delco 736C, starters. 737B, 737G, 1107021, 1107060, 1107067, IHS440 $8.49 1107074, 1107093, 1107169, 1107174, Lever fits: ABC012 applications except 1107404, 1107407, 1107408, 1107412,
Cub up to SN: 128799 parts Electrical 1107427, 1107430, 1107435, 1107444, Replaces: 1918322, 1919434 USA made 1107448, 1107462, 1107487, 1107490, Parts, 1107926, 1107999, 1108012, 1108016, 1108038, 1108041, 1108060, 1108080, IHS1635 $15.89 1108092, 1108093, 1108097, 1108103, 1108112, 1108142, 1108158, 1108173, Starter Lever fits: Cub SN: 501 - 128798 1108174, 1108185), Replaces: Delco 818002 Replaces: 351347R2 (7.369” long) USA made ABC4217 $46.95 Commutator End Housing fits: A, B, BN, C, H, M, Supers, MTA, F12, F14, I, O, W4, 6, Supers series, W12-W40, 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, IHS1247 $21.50 Starter Switch Pull Rod fits: A, AV, B, BN 400, 450, W400, W450; Industrial: T4, T5, SN: 42757 & up; Super A, Super AV, 100, T6, T340 (All gas, TractorLP w/ Delco 1107021, 130, (140 up to SN: 26800) 1107060, 1107067, 1107093, 1107169, Replaces: 350739R2, 55757DA 1107174, 1107427, 1107430, 1107435, (23-3/8” length, 1/4” dia.) USA made 1107448, 1107462, 1107926, 1108012, NOTE: Shorter than original for A, B. 1108016, 1108038, 1108041, 1108060) IHS3074 $25.99 Starter Switch Pull Rod fits: C, Super C, NOTE: Order brushes separately. 200, 230, Replaces: 351446R2 ABC4220 $15.95 Starter Brush & Bushing Kit (28-1/2” length, 1/4” O.D.) USA made fits: 404, 424, 444, 504, 544 gear drive, NOTE: Zinc plated. I656 gear drive, 706, 806; Industrials: IHS3082 $25.99 Starter Switch Pull Rod fits: Super T340, 500, 500C, 3514, 3616 (All gas M, Super MV SN: F28175 - F52627 & Steinerw/ Delco 1107228, 1107229, 1107275, L504802 - L512541 gas, LP 1108291, 1108296, 1108323, 1108334, Replaces: 358266R1 1108344, 1108393) (24-5/8” length, 1/4” O.D.) USA made ABC4213 $15.95 Starter Brush & Bushing Kit fits: 454, NOTE: Zinc plated. 464, 574, 674, 666 Gear drive; Industrial: IHS3107 $27.99 Starter Switch Pull Rod fits: MTA, Super 2400B, 2500A, 2500B, 3400A, 3414, 3444 MTA, Super MVTA gas, LP w/ BC144, 3500A, 3514, 3800, 3850, 4500 Replaces: 358923R1 (All gas w/ Delco 1107362, 1108295, (28 1/2” length) USA made 1108343, 1108394, 1108395, 1108432, 1109360, 1109398) Starter, parts continue on next page
STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com 313 Starter, parts cont... Starter, parts cont... Part # USD Description / Application Part # USD Description / Application
Push Button Switches, parts cont... Push Button Switches, parts cont... MFS140 $15.99 IHS800 $13.25 O.E.M. Push Button Starter Switch Manual Starter Switch (Base Mount) fits: 385, 395, 444, 454, 464, 484, 485, 495, fits: Cub SN: 224401 - 239826, Cub 544, 574, 584, 585, 595, 664, 666, 674, Loboy SN: 18701 & up, 140 SN: 26801 - 684, 686, 706, 756, 766, 784, 786, 806, 826, 45000, Replaces: 376295R91 856, 884, 886, 966, 986, 1026, 1066, 1086, (Top of mounting plate to end of button 1206, 1256, 1456, 1466, 1468, 1486, 1566, = 1”, 1-3/4” c.c. bolt holes) 1568, 1586, 2400A, 2500A, 3088, 3288, 3388, 3488, 3588, 3688, 3788, 4100, 4156, ABC3208 $24.50 O.E.M. Neutral Starting Switch fits: Cub 4166, 4186, 4366, 4386, 4568, 4586, 5088, SN: 239827 & up, 140 SN: 45001 & up, 5288, 5488, 6388, 6588, 6788, 7288, 7488; 154, 185, 385, (484 SN: 6501 & up), 485 Hydros: 70, 86, 100, 186 SN: 7100 & up, 544, (584 SN: 6953 & Replaces: 397940R93 NOTE: Wires up), 585 SN: 9312 & up, (656 gas, diesel, attach to switch w/ spade terminals. Hydro), 664, 666, (684 SN: 7253 & up), ABC233 $12.50 Universal 2-Terminal Starter Switch, 685 SN: 10178 & up, 686, 706 - 1456, 766 Extra heavy duty momentary push - 1586, 3088 - 6788; Hydros 70, (84 SN: button switch fits: Ag & Light Industrial 7253 & up), 86, 100, 186 equipment; Also Inc.®used as a Horn or glow Replaces: 121629C3 (5/8” - 32 thread, plug switch on Cub - 4586 2 spades, 2.575” o/a length) USA made Replaces: 373611R91 (Mounting stem NOTE: See website for all applications. 5/8 - 32 UNF thread, 21/32” long) ABC4015 $25.99 NOTE: Depress button: ON; Spring (Premium) return: OFF. Two screw type terminal. Case IH Up to 35-v (DC), rubber cap for dust & IH/Farmall Heavy Duty Manual Starter Switch moisture protection (Base Mount) fits: H, M, Early Supers, Push / Pull Switches I, O, W-4, 6 series gas, diesel Parts, IHS381 $39.95 Push / Pull 1 Screw Type Terminal ABC066 $16.40 Replaces: 64931H, 356913R91, 107497C1 (Economy) (1-3/4” c.c. mounting holes, fits in 7/8” Ignition Switch fits: Cub, A, B, C, H, M hole) NOTE: Will work on 6-volt or 12- & Supers, I, O, T, W-4, 6, 9 series gas, volt systems. diesel w/ Magneto ignition Replaces: 54207DB IHS382 $39.95 Push / Pull 2 Screw Type Terminal Ignition Switch fits: Cub, A, B, C, H, M IHS1563 $25.99
Electrical parts & Supers, I, O, T, W-4, 6, 9 series, 100, Starter Switch Box fits: H, HV when 130, (140 up to SN: 26800), 200, 230 gas, factory equipped w/ battery ignition or diesel w/ Battery ignition H w/ magneto ignitionTractor SN: 137831 & up Replaces: 62801DC Replaces: 9357D NOTE: Cast iron. IHS383 $7.49 Push / Pull Ignition Switch Knob only fits: IHS381, IHS382 Ignition Switches IHS3263 $49.99 Foot Starter Switch Actuator Lever & Replaces: 8732D (10 - 32 thread) Bracket fits: H, M, MD, Early Super H & Super M & MD (All using foot activated ABC398 $8.69 Universal 2-Position Push / Pull Starter starter switch), Replaces: 351922R11 Switch fits: Ag & Light Industrial (lever), 351924R1 (bracket) USA made equipment w/ battery ignition NOTE: All using a foot activated (10-24 UNC knob thread) Steinerstarter switch that mounts to the NOTE: 30 AMP, 3/8” dia. thread, two steering post. screw type terminals, non-fused. This can be used on battery ignition IHS798 $13.25 O.E.M. Starter Push Switch fits: 240, systems only. 300, 330, 340, 350, 400, 404, 424, 444, 450, ABC489 $18.75 Magneto Push / Pull Ignition Switch 460, 504, 560, 606, 656, 660, 706, 806, fits: Cub, A, B, C, H, M, Supers, I, O, T, 1206, 4100, 4156, 4166, 4186; Combines: W-4, 6, 9 series gas, diesel w/ Magneto T4 - Early TD5, Replaces: 366316R91, Ignition NOTE: One screw type 366317R93 USA made NOTE: Wires terminal; Out: ON; In: OFF. Does not attach to switch w/ eyelets & screws. have original look, but works great!
314 STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm Starter, parts cont... Starter, parts cont... Part # USD Description / Application Part # USD Description / Application Ignition / Key Switches Ignition / Key Switches cont... ABC065 $13.59 IHS831 $34.50 O.E.M. Ignition / Key Switch Ignition / Key Switch w/ (2) Keys & w/ (2) Keys & Mounting Nut Mounting Nut fits: IH models fits: 464 SN: 109151 & up, 574 SN: 114909 NOTE: 2 wire switch. May have to drill & up gas, diesel, 674 SN: 108105 & up hole to 0.800” on some applications. gas, diesel, 786, 886, 986, 1086, 1486, IHS760 $19.95 O.E.M. Ignition / Key Switch w/ (2) 1586, 2500A SN: 114909 & up, 3388, Keys & Mounting Nut fits: Cub SN: 3588, 3788, 4386, 4586, 4786; Combines: 224401 - 239826, Cub LoBoy SN: 18701 Late 715 - 1480; Hydro: 186 & up, Cub Cadet 70, 100, (140 SN: 26801 Replaces: 107682C1, 71427C1 - 45000), 240, 330, 340, 350, 404, 424, 444, (3/4”-20 UNEF threaded stem) 450, W450, 460, 504, 544, 560, 606, 656, USA made NOTE: Five spade 660, 664, 666, 686, 706, 756, 766, 806, terminals. 826, 856, 966, 1026, 1066, 1206, 1256, KEY05 $5.49 Ignition Key (For IHS760, IHS1107, 1456, 1466, 1468, 1566, 1568, 2404, 2424, IHS831) fits: Late Cub - 7488; Hydros: 70, 2444, 3444, 3514, 3616, 4100, 4156, 4166, 84, 86, 100, 186; Lawn & Garden: 70, 100 4186, 4366, 4386; Hydros: 70, 86, 100; Replaces: 382458R1, 131313C1 Combine: Early 615 - 915; Crawlers: T4, USA made Inc.® T5, TD-5 (All SN: 3088 & up) IHS3268 $17.95 IH/Farmall Replaces: 366313R91, 370375R91, 3-Position Key Switch w/ (2) Keys IH/Farmall 379594R92, 403562R2, 636365R91 fits: Some 354, 385, 454, (464 up to SN: Case IH (.800” hole dia.) USA made 109150), 484, (485 SN: 15001 & up), NOTE: 2 spade terminal switch. May (574 up to SN: 114908), 584, (674 up to have to drill hole to 0.800” on some SN: 108104), 684, 784, 884, Hydro 84; applications. Industrial: 260A, 2300, 2400, (2500 up to SN: 114908) (All w/ (6) 0.250” wide parts Electrical IHS1107 $39.99 O.E.M. Ignition / Key Switch w/ (1) Parts,spade terminals), Replaces: 529800R91 Key (For .800” hole dia.) fits: 140 SN: ABC3272 $15.89 45001 & up, Cub SN: 239827 & up, Cub Ignition / Key Switch w/ (2) Keys LoBoy: 154, 184, 185; Cub Cadet: 70, 71, fits: IH (485 to SN: 15000), 585, 685, 785; 72, 73, 100, 102, 104, 105, 106, 107, 108, Case IH 238, 248, 258, 268, 685 122, 123, 124, 125, 126, 127, 147 Replaces: 3107556R93 NOTE: 6 spade Replaces: 60736C2 USA made terminals: (2) 0.375” wide, (4) 0.250” NOTE: Three spade terminals. wide, 0.625” threaded end, 4-position ABC4308 $49.99 NEW! Ignition Switch w/ (2) Keys & on heat start. Weather Cap fits: 234, 244, 254; FDS400 $3.99 Case IH: 235, 245, 255, 1120, 1130, 1140 Ignition Key fits: 354, 364, 384, 385, 454, Replaces: 1991035C1, 1991036C1, Tractor 464, 484, 485, 584, 585, 674, 684, 685, 784, 1271716C1, 83940565 884, 885, Replaces: 3110259R1 (5 screw terminals w/ preheat) NOTE: For some applications the mounting hole may have to be ABC4301 $18.99 NEW! 12-volt Ignition Key Switch w/ slightly enlarged or the alignment tab (2) Keys & Mounting Nut fits: Case IH removed. Switch may look different 896, 2094-4994, 5120-5250, 7110-7250, from original. See our instruction sheet 8910-8950, C50-C100, CX50-CX100, for new wiring diagram. MX80C, MX90C, MX100C, MX100, ACS288 $37.50 Ignition / Key Switch w/ (2) Keys MX110, MX120, MX135, MX150, MX170, fits: 300, 400, W400 (All w/ Delco MX180, MX200, MX220, MX240, MW270 Steiner Replaces: 282775A1, D134737 NOTE: 35 switch), Replaces: 300557R91, 361998R93 (.995” dia. threaded end) AMP, 4 position, 7 spade terminals. NOTE: Five spade terminals. Can See website for all applications. replace 4 terminal switch since switch ABC400 $16.39 has 2 battery terminals. Ignition / Key Switch w/ (2) Keys KEY01 $4.99 & Mounting Nut fits: Ag & Light Ignition Key (For ACS288) Industrial equipment (3/4” dia. thread) NOTE: Brass. NOTE: Four stud type terminals.
STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com 315 Light switches, parts Light switches, parts cont... NOTE: Some switches have a different appearance than the Part # USD Description / Application original switches, but once installed only the handle is visible IHS601 $49.99 O.E.M. 12-volt Rotary Light Switch which is identical to originals. (3-position) fits following w/ 12-volt & Part # USD Description / Application voltage regulator: 300 LP, 350 LP, diesel, IHS579 $8.49 Old-Style Knob (For Rotary Light (350 gas SN: 13243 & up), 400 LP, 450 LP, Switches) fits: Cub, (A, AV & Supers), diesel, (450 gas SN: 11084 & up), 600, 650 B, BN, (C, H, HV, M, MD, MV, MDV, Replaces: 363131R91 USA made & Supers), MTA series, (W4, W6 & IHS598 $47.95 O.E.M. 6-volt Rotary Light Switch Supers), W9, W6TA series, WD6, WD9, (4-position) fits the following w/ 6 volt WR9, WDR9, O4, OS4, I4, I6, ID6, I9, systems: Cub SN: 210001 - 224000, Cub ID9; Crawlers: T6, TD6, T9, TD9, TD14, LoBoy SN: 10001 - 18700, 140 up to SN: TD14A, TD15 (150 series), TD18, TD18A 26800, 240, 340 gas, (T340 up to SN: 5395 Replaces: 57313D NOTE: Interchanges gas), (T4, T5 6-volt), Replaces: 371464R91 w/ original equipment (O.E.M). USA made IHS1636 $69.99 Rotary Light Switch (4-position) w/ IHS599 $47.95 O.E.M. 12-volt Rotary Light Switch Knob fits the following models w/ cut- (4-position)Fits the following w/ 12-volt out relay on generator: A, B, C, H, M, O, system: 340 diesel, 500 Crawler, I460, W series; Also fits Cub w/ cut-out relay on governor housing F460, 560, 660, (T4, T5 12-volt), TD5 Replaces: 371465R91Inc.® USA made Replaces: 57310DX, 57310DY IHS788 $41.99 IHS595 $49.99 Rotary Light Switch (3-position) w/ O.E.M. 12-volt Rotary Light Switch (6-volt) Old-Style Knob fits following models (4-position) fits: Cub SN: 224401 & up, w/ voltage regulators: Cub, (A, AV & Cub LoBoy SN: 18701 & up, 140 SN: Supers), B, BN, (C, H, HV, M, MD, MV, 26801 - 62471, 154, 184, 185, 354, 404, (T340, TD340 both SN: 5396 & up), 424,
Case IH MDV, & Supers), MTA series, (W4, W6 &
IH/Farmall Supers), W9, W6TA series, WD6, WD9, 2424, 444, 2444, 454, (464 up to SN: WR9, WDR9, O4, OS4, O6, OS6, I4, I6, 109151), 504, (574 up to SN: 104908), 606, IHS596 $47.99 ID6, I9, ID9 Parts,(674 up to SN: 108105), 706, 806 1206, (12-volt) IHS595 Replaces: 1994038 2300A, 2400A, (2500A up to SN: 104908), IHS596 Replaces: 1994048, 1994050, 3414, 3444, 3514, 3600, 3616, 3800, 3850, 263691R92 USA made NOTE: For 4100, 4156, Replaces: 376851R91, R92 tractors w/ regulators, not cutouts & USA made rear light w/ switch. IHS786 $47.95 O.E.M. 12-volt Rotary Light Switch IHS593 $49.99 (4-position) fits: 544, 656, 664, 666, 756, (6-volt) 766, 826, 856, 966, 1026, 1066, 1256, 1456, Rotary Light Switch (4-position) w/ 1466, 1468, 1566, 1568, 4166, 4366 Hydros: Electrical parts Old-Style Knob fits following models 70, 100, Replaces: 403571R1 USA made w/ voltage regulators: Cub, (A, AV & Supers), B, BN, (C, H, HV,Tractor M, MD, MV, IHS3234 $45.99 O.E.M. 12-volt Rotary Light Switch MDV, & Supers), MTA series, (W4, W6 & (4-position) fits: 140 SN: 62472 & up w/ IHS594 $47.95 Supers), W9, W6TA series, WD6, WD9, alternator, 384, 385, (464 SN: 109151 & up), 484, (574 SN: 104909 & up), 584, (12-volt) WR9, WDR9, O4, OS4, O6, OS6, I4, I6, (674 SN: 108105 & up), 684, 686, 784, 786, ID6, I9, ID9 USA made NOTE: For 884, 886, 986, 1086, 1486, 1586, (2500 SN: tractors w/ regulators, not cutouts & w/ 104909 & up), (3088 - 3788), 4186, 4386, rear light w/out switch on light. 4568, 4586, 4786, (5088 - 7288), Hydro 84, Hydro 86, Hydro 186, Replaces: IHS602 $5.95 New-Style Knob (For Rotary Light 107200C2 (6 spade terminals, 0.685” O.D. thread) USA made Switches) fits: Cub SN: 210001 & up, SteinerCub LoBoy SN: 10001 & up - 4386 ABC398 $8.69 Universal 2-Position Push / Pull Light Replaces: 1930685 NOTE: O.E.M Switch fits: Ag & Light Industrial manufacture, arrow design. equipment (10-24 UNC knob thread) NOTE: 30 AMP, 3/8” dia. thread, two IHS600 $49.99 O.E.M. 6-volt Rotary Light Switch screw type terminals, non-fused. (3-position) fits following w/ 6-volt voltage regulator: 100, 130, 200, 230, 300 JDS631 $13.59 Universal 3-Position Fused Push / Pull gas, 330, (350 gas up to SN: 13242), 400 Starter & Light Switch fits: IH / Farmall gas, W400 gas, (450 gas up to SN: 11083) models w/ voltage regulator Replaces: 362111R91, 363130R91 (10-24 UNC knob thread) USA made NOTE: 15 AMP, five terminals, fused.
316 STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm Light switches, parts cont... Dash light lens Part # USD Description / Application Fits: 460, 560, 660 Replaces: 371204R1 ABC4279 $8.99 NEW! Universal 3-Position Push / Pull Light Switch fits: Ag & Industrial Description Part # USD equipment (3/8” mounting thread) Dash Lamp Lens...... IHS900...... $22.25 NOTE: 25 AMP, 4 spade terminals, NOTE: For light bulbs use (2) ABC356. non-fused. IHS950 $14.75 Light Switch Field Resistor fits: Cub, A, AV, (Super A equipped w/ generator relay), C up to SN: 47125, (H, HV up Headlights, parts to SN: 340953), M, MV w/ magneto Need light components? See page 322 ignition, O4, OS4, O6, OS6, W4, W6, Part # USD Description / Application (WD6 w/ Delco lighting), W9 w/ magneto ignition, (WD9 w/ Delco IHS351R $49.99 (6-volt) lighting) & WR9 (All w/ cut-out on Complete Headlight Assembly generator), Replaces: 47891D, Delco IHS351R12V $47.95 fits: Cub, A, B, C, H, M, Supers, I, O, T, 1878070 (12-volt) W-4, 6, 9 series, TD-14, 14A Crawler, TD-18, 18A Crawler (1939 to early 53) IHS952 $13.59 Lighting Switch Dimmer Resistor IHS351R Replaces: 45640DB fits: Cub, A, B, C, H, HV, M, MV & IHS351R12VInc.® Replaces: 45640DB, Supers, O4, OS4, O6, OS6, W4, Super 61225DB (4-3/4”) W4, W6, Super W6, (WD6 w/ lighting IH/Farmall NOTE: Red. See website for serial IH/Farmall
only), W9, WR9, WR9S, 100, 130, 200, Case IH number breaks. See light chart A for 230, 300, 330, 350, 400, W400, 450, W450 subcomponents. (All gas w/ 6-volt system) Replaces: 47889D, Delco 814545 NOTE: Fits switches for all 6-volt ABC3857 $9.49
systems both w/ cut-outs & regulators. parts Electrical IHS2432 $13.59 Light Switch Dimmer Resistor fits the Parts,6 or 12-volt LED Light Bulb following when using a 12-volt system: NOTE: 27 LED chips. Cub, A, AV, Super A, Super AV, B, BN, C, Super C, H, HV, Super H, Super HV, M, MD, MV, MDV, Super M, Super MD, IHS460 $49.99 6-volt Flatback Headlight Assembly Super MV, Super MDV, MTA series, W4, fits: Cub SN: 165153- to SN: 210000, W6, W9, Super W4, Super W6, W6TA Cub LoBoy all to SN: 10000, Supers: A, series, WD6, WD9, WR9, WR9S, WDR9, C, H, M, MD, MTA, SW4, SW6, SW9 O4, OS4, O6, OS6, I4, I6, ID6, I9, ID9, T6, (All early 1953 & up), 100, 130, 200, TD6, T9, TD9, TD14A, TD15, TD18 230, 300, 330, (350 up to SN: 13242), JDS1030 $12.69 400, (450 up to SN: 11083), (W400, Light Switch KnobTractor fits: Cub Cadets up to W450 both up to SN: 1350) (All gas) SN: 400000 (10 - 32 UNF) Replaces: 357884R91,92,93,94 NOTE: Black metal. (4-5/8”) NOTE: See website for serial number breaks. Flatbacks were used early 1953 & up IHS463 $49.95 12-volt Flatback Headlight Assembly fits: Cub SN: 165153- to SN: 210000, Shift quadrant light, part Cub LoBoy all to SN: 18700, Supers: A, C, H, M, MD, MTA, SW4, SW6, SW9 Serviceable for 756, 766, 826, 856, 966, (All early 1953 & up), 100, 130, 200, 1066, 1026, 1256, 1456, 1466, 1468, 1566, Steiner 230, 300, 330, (350 SN: 13243 & up, 1568, Hydro 100, Replaces: 397946R1, IHS841 gas, LP diesel), 400 gas, LP, diesel,(450 406127R1 (2-3/8” o/a length) SN: 11084 & up, gas, LP, diesel), (W400, W450 both SN: 1351) & tractors converted to 12 volt ABC345 Replaces: 357885R91,92,93 (4-5/8”) Description Part # USD NOTE: See website for serial number 12-volt Shift Quadrant Light...... IHS841...... $20.79 breaks. Uses sealed beam bulb (For 1-1/4" opening) IHS403. 12-volt Bulb, Single contact...... ABC345...... $2.49 Headlights, parts continue on next page
STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com 317 Headlights, parts cont... Headlights, parts cont... Need light components? See page 322 Part # USD Description / Application Part # USD Description / Application JDS676 $19.99 Light Ring (Bezel) w/ Screw IHS402 $35.99 6-volt Sealed Beam Bulb w/ Guide (For Sealed Beam Lights) fits: Cub SN: Name fits: Cub SN: 165153- to SN: 210001 & up, Cub LoBoy SN: 10001 210000, Cub LoBoy all to SN: 10000, & up, 140, 240, 340; Also fits as a tail Supers: A, C, H, M, MD, MTA, SW4, light ring only for 460, 560, 660 SW6, SW9 (All early 1953 & up), 100, Replaces: 371445R91, 371449R91, 130, 200, 230, 300, 330, (350 up to SN: 371451R91 (4-1/2”) 13242), 400, (450 up to SN: 11083), FDS213 $48.50 12-volt Sealed Beam Headlight (W400, W450 both up to SN: 1350) Assembly Serviceable for F340, 404, Rear view (All gas), Replaces: 358890R92 424, 444, 460, 504, 544, 560, 606, 656, (4-5/8”) NOTE: See website for serial IH 660, 706, 756, 806, 856, 1206, 1256, number breaks. 2404, 2424, 2444, IH 2500, 2504, 2606, IHS403 $35.50 12-volt Sealed Beam Bulb w/ Guide T340, TD340 (All w/ hood mounted Name fits: Cub SN: 165153- to SN: head lights not grille mounted); 706, 210000, Cub LoBoy all to SN: 18700, 806 both w/ side mounted lights Supers: A, C, H, M, MD, MTA, SW4, Replaces: 377866R91 (5-3/4”) SW6, SW9 (All early 1953 & up), 100, ABC443 $15.95 130, 200, 230, 300, 330, (350 SN: 13243 Inc.® & up, gas, LP diesel), 400 gas, LP, 12-volt Sealed Beam Bulb diesel,(450 SN: 11084 & up, gas, LP, fits: Same as FDS213, Replaces: 4419 diesel), (W400, W450 both SN: 1351) & (5.625” dia.) Rear view tractors converted to 12 volt Rear view Replaces: 358893R92 (4-5/8”) Case IH NOTE: See website for serial number ABC3696 $53.95 12-volt Negative Ground LED Lamp IH/Farmall breaks. fits: Same as FDS213 (5.730” dia.) IHS3698 $53.95 NOTE: Direct replacement for 4419 Parts,sealed beam or halogen lamp. Flood 12-volt LED Lamp fits: Same as beam pattern. Polarity sensitive, IHS460, IHS463, Replaces: 358890R92, Rear view negative ground only. 358893R92 (4-5/8” dia.) IHS647 $29.95 Rear view NOTE: Flood beam pattern. 12-volt Sealed Beam Headlight Assembly (For Flat Top Fenders) fits: 06, 26, 56, 66, 86 series IHS461 $12.50 (4-1/2”) NOTE: Post is out of back w/ (Ring) Headlight Ring or Gasket wires through post. Electrical parts fits: Cub SN: 165153- to SN: 210000, Cub LoBoy all to SN: 18700, Supers: ABC353 $9.50 A, C, H, M, MD, MTA,Tractor SW4, SW6, (Lo Beam) SW9 (All early 1953 & up), 100, 130, ABC460 $16.50 12-volt Sealed Beam Lamp 200, 230, 300, 330, 350, 400, 450, W400, (Hi Beam) fits: Same as IHS647 IHS462 $5.69 W450 ABC353 Replaces: 4411, 373662R91 (Gasket) IHS461 Replaces: 358891R91 ABC460 Replaces: 4410 IHS462 Replaces: 358892R91 (4.365” O.D.) (4-5/8”) NOTE: Fits IHS460 & IHS463 flatback lights. Rear view ABC527 $5.49 JDS468 $48.95 6-volt Sealed Beam Headlight Concaved Mounting Washer SteinerAssembly Serviceable for Cub SN: fits: Same as IHS647 210001 & up, Cub LoBoy SN: 10001 & (2-1/4” O.D., 9/16” center hole) up, 140 up to SN: 26800 (All w/ 6-volt system); Will also fit the following ABC3441 $64.65 when ordering ABC353 Bulb to 12-volt LED Trapezoid Headlight convert to 12-volt system: 140 SN: Assembly w/ Cree LED chips 26801 & up, F404, I404, I504 fits: Same as IHS647 Replaces: 376849R91, 381181R91 (6 LED bulbs, 1/2” rear stud mount, (4-1/2”) NOTE: Black. See light chart 4-1/2” dia. bulb) NOTE: Will update H for subcomponents. your tractor to LED technology.
318 STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm Headlights, parts cont... Headlights, parts cont... Part # USD Description / Application Part # USD Description / Application ABC3500 $64.65 12-volt LED Flood Light Assembly ABC3916 $88.60 Front Hood Mount LED Light w/ Cree LED chips fits: Same as fits: Case IH 385, 685 both 1986 & up; IHS647 (6 LED bulbs, 1/2” rear stud 485, 585, 885 (All 1985 & up) mount, 4-1/2” dia. bulb) Replaces: 133291C91, 353656A1 NOTE: Will update your tractor to NOTE: Must unscrew supplied LED technology. mounting bracket from this light for ABC3474 $49.95 these applications. See website for (Trapezoid specifications. pattern) ABC3028 $13.99 Light Bezel (For ‘Hobbs’ style light w/ 12-volt Cree LED Lamp fits: Same as ABC3490 $49.99 out glare guard) fits: Same as IHS647 IHS647, JDS468, ABC3441, ABC3500, (Flood Replaces: 676078R1 (5.250” O.D., ABC3514 pattern) 3.675” I.D., 1.125” wide, 3 outer tabs ABC3474 Replaces: 4411 & 4 inner tabs) NOTE: Rubber. Fits ABC3490 Replaces: 4410 IHS647. See website for additional (4-1/2" O.D.) applications. Rear view ABC3028 $13.99 Light Bezel (For ‘Hobbs’ style light w/ out glare guard) fits: Same as IHS647 IHS4090 $309.99 Replaces: 676078R1Inc.® LED Front Head Light Conversion Kit, pair fits Case IH Magnums: 7110, 7120, (5.250” O.D., 3.675” I.D., 1.125” wide, IH/Farmall 3 outer tabs & 4 inner tabs) IH/Farmall
7130, 7140, 7150, 7210, 7220, 7230, Case IH 7240, 7250, 8910, 8920, 8930, 8940, 8950 NOTE: Rubber. Fits IHS647. See Replaces: 91971C2, 91972C2 website for additional applications. ABC3035 $22.50 Light Bezel (For ‘Hobbs’ Late style w/ ABC3514 $41.50 glare guard) fits: Tractors w/ ‘Hobbs’ 12-volt LED Flood Light Assembly round lights & 5.250” O.D. bezel when parts Electrical w/ Bridgelux LED chips fits: 12-volt Parts,extended glare guard bezel is desired applications NOTE: 60 degree flood Replaces: 676078R1 beam pattern. See website for all (5.250” O.D., 3.675” I.D., 2.430” wide, specifications. 3 outer tabs & 4 inner tabs) NOTE: Rubber. Fits IHS647. ABC4116 $72.75 LED Front/Rear Cab or Fender Light IHS1932 $55.55 fits: 180 - 380, 5120 - 5250, 7110 - 8950, (LH) CX50 - CX100, MX80C - MX305; Steiger: 335 - STX530, 9110 - 9280 Front Lower Light Panel fits: 786, 886, Replaces: 178345A1, 92269C1 986, 1086, 1486, 1586, 3388, 3588, 3788, (60 degree flood pattern) Hydro 186 (All w/ cab & w/out front NOTE: See website for all TractorIHS1934 $55.55 cab lights) applications/specifications. (RH) IHS1932 Replaces: 117746C1, C2 ABC4130 $82.50 LED Front/Rear Cab Light fits: 5120 IHS1934 Replaces: 117747C1, C2 - 5250, 7110 - 8950, MX80C - MX170, MX215 - MX305 (1 to 2 used) Replaces: Case IH: 1983301C1, 87435768, 92266C2 NOTE: See website for all IHS2455 $199.99 (LH) Front Lower Light Panel fits: 3088, applications. Can also be used on 3288, 3488, 3688, 5088, 5288, 5488, many other applications: combines, 6388, 6588, 6788, 7288, 7488 industrial, etc. as this is a side Steiner (All w/ cab) mounted swivel LED light. IHS2455 Replaces: 143172C3 ABC4141 $82.50 LED Oval Worklight fits Case IH IHS2460 Replaces: 143173C3 combines: 2377 - 2588 (2 used), 5088 IHS2460 $199.99 NOTE: Fiberglass. Parts are gel Axial Flow - 7088 Axial Flow (6 used), (RH) coated w/ a wax release agent on 7120 Axial Flow - 9240 Axial Flow surface. We recommend a wet sand (6 used), Replaces: Case IH: 87001315, w/ fine paper prior to painting. The 87344596 (5-3/4” long x 3-3/4” tall) release will not allow paint to adhere. NOTE: See website for all applications & specifications. Headlights, parts continue on next page
STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com 319 Headlights, parts cont... Tail lights, parts cont... Part # USD Description / Application Part # USD Description / Application IHS2447 $89.99 IHS3018 $66.50 Rear Light Panel fits: 786, 886, 986, 12-volt Combo Tail Light Assembly (LH) 1086, 1486, 1586, 3088, 3288, 3388, 3488, fits: 140 SN: 26801 & up, 364, 384, 385, 3588, 3688, 3788, 5088, 5288, 5488, 6388, 464, 484, 485 (through 1985); F544, 574, 6588, 6788, 7288, 7488, Hydro 186 (All 584, 656, 666, 674, 684, 686, 706, 756, 766, w/ rops, non-rops or cab) 784, 806, 826, 856, 884, 966, 1026, 1066, IHS2447 Replaces: 111562C1, 111562C2 1206, 1256, 1456, 1466, 1468, 1566, 1568, IHS2450 Replaces: 111563C1, 111563C2 IHS2450 $89.99 Hydros: 70, 84, 86, 100 NOTE: Fiberglass. Parts are gel coated (RH) Replaces: 387729R92 (4-1/2” dia. sealed w/ a wax release agent on surface. We beam, 5.275” O.D., rubber bezel, 3 spade recommend a wet sand w/ fine paper terminals on rear light housing) prior to painting. The release will not Rear view NOTE: See website for all applications. allow paint to adhere. Customer must drill holes to retain to tractor. IHS899 $18.95 12-volt Sealed Beam Tail Lamp w/ transparent red background using separate bulb (For Light 377102R92) fits: Cub, Cub LoBoy 154, 184, 185, (140 Piggy back tail light components SN: 26801 & up), 340, 354, 364, 384, 404, Fits: Cub, Cub LoBoy, A, AV, Super A, Super A1, Super AV, 424, 444, 454, 460, Inc.®504, 544, 560, 574, 606, Super AV1, C, Super C, H, HV, Super H, Super HV, M, Super 656, 660, 666, 674, 686, 706 - 1586, 4366 - M, MD, Super MD, MV, MDV, Super MV, Super MDV, I4, I6, Rear view 4786, Hydro 86 - Hydro 186 (All w/ I9, ID6, ID9, O4, OS-4, O6, OS-6, ODS-6, W4, W6, WD6, W9, 12-volt systems), Replaces: 371461R92 WD-9, WR-9, WDR-9, WR-9S (4-1/2” dia.) ABC3875 $49.50
Case IH 12-volt LED Rear Combo Lamp, IH/Farmall Red/White fits: Same as IHS899 ABC344 ACS123 OLS071 OLS072 Replaces: 371461R92 (4-1/2” dia.) Part # USD Description Parts,NOTE: Replaces IHS899 & eliminates the separate 12-volt bulb. ABC344 $1.99 6-volt Tail Light Bulb, Single contact Red view Replaces: 142303, Bulb #63 IHS3815 $38.75 (G-6, Bayonette base, .63 amps, 7/16”-20 12-volt LED Tail Lamp, round fits: 786, UNF thread dia.) (886 SN: 13588 & up), 986 SN: 17756 ACS123 $15.95 Red Glass Tail Light Lens & up, 1086 SN: 30839 & up, 1486 SN: Replaces: 354308R1 (2-1/8” O.D.) 17123 & up, 1586 SN: 15696 & up, 3088 - 7488, Hydro 186, Replaces: 131183C91,
Electrical parts OLS071 $10.75 Tail Light Trim Ring 48046976 (4” O.D., 1-1/2” wide, Replaces: 354307R92 (2) 2-1/2” c.c. mounting holes) OLS072 $2.99 Tail Light Gasket, Replaces:Tractor 92111H NOTE: Plastic base - do not overtighten. USA made Black wire is ground, red wire is power. 2 used per tractor; Sold individually.
IHS3809 $43.95 12 to 24-volt LED Combination Flash Tail lights, parts & Turn Lamp, Rectangle fits: Case IH Need light components? See page 322 385 - 895, 3220, 3230, 4210, 4230, 4240, Part # USD Description / Application 7110 - 7250, 8910 - 8950, CX50 - CX100, IHS473 $72.99 MX80C - MX170, Combines, etc.; Also fits (6-volt) the following IH w/ factory IH Canopy, Combo Tail Light Assembly Cab or Rops: 484 - 884, 786, (886 SN: IHS455 $69.95 Steinerw/ Red Jewel Lens & Rotary Switch 13588 & up), 986 SN: 17756 & up, 1086 (12-volt) fits: Cub, Cub LoBoy, A, B, C, H, M, SN: 30839 & up, 1486 SN: 17123 & up, Supers, I, W-4, 6, 9 series, 100 - 650, 1586 SN: 15696 & up, (3088 - 7488), Hydro T4, T5, TD5, Miscellaneous Combines, 84, Hydro 186, Replaces: 130882C91, Windrowers 87703630 (6-3/4” o/a length, 3-1/8” tall, IHS473 Replaces: 373305R91 (2) 5-3/4” c.c. mounting holes, 2” wide) IHS455 Replaces: 373306R91 NOTE: Plastic amber lens w/ plastic (4-3/4”) NOTE: See light chart A for base - do not over tighten. Black wire is subcomponents. ground, red wire is power. See website for all applications.
320 STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm Tail lights, parts cont... Tail lights, parts cont... Part # USD Description / Application Part # USD Description / Application
FDS172 $49.99 12-volt Tail Light Assembly (Solid Bucket) ABC4136 $51.50 Serviceable for Cub LoBoy SN: 10001 & 12-volt LED Round Fender & Cab Mount up, 140, 154, 240, 340, 404, F856; Lawn & Warning Light fits: Tractors & equipment Garden: Cub Cadet 70, 71, 72, 102, 122, w/ 12-volt systems (5-3/4” O.D.) NOTE: 25 LEDs. Amber lens on one side 123 (All up to SN: 400000) & amber / red lens on the other side. Replaces: 370306R91, 370716R91, Amber view 371368R91, 376850R91 NOTE: May ABC4154 $44.99 have to ‘slot’ mounting holes for 12-24-volt LED Fender & Cab Mount some applications. For 6-v bulb order Warning Light w/ amber & amber lenses ABC1439. Economy style. See light chart fits: Tractors & equipment w/ 12-24-volt F for subcomponents. systems (4” dia.) NOTE: See website for ABC548 $10.99 12-volt Round Tail Light Assembly w/ dimensions & detailed information. licensed lamp window, red lens & black ABC546 $29.99 12-volt Fender & Cab Warning Light ABS base fits: 100 - 1256, Cub Cadet 70 w/ 1 amber lens, 1 red lens, amber side - 123, Replaces: 45645HA, 121846C91, marker, single contact bulb & black ABS 370306R91, 370716R91, 376850R91, base Serviceable for 766 & up (All using 379789R91, 404418R1, 967696R92 rectangular warningInc.® light) (4” dia.; (2) 1/4” dia. stud mounts, Replaces: 537328R91 (4-1/2” dia. 1-7/8” c.c. studs) NOTE: May have IH/Farmall w/ 1/2-20” mounting stud) IH/Farmall
to ‘slot’ mounting holes for some Case IH ABC4098 $41.99 applications. 12-volt LED Fender & Cab Mount ABC544 $17.99 Warning Light w/ amber / amber lenses 12-volt Fender & Cab Warning Light w/ Serviceable for 766 & up (All using 2 amber lenses, double contact bulb & rectangular warning light)
black die cast base Serviceable for 140 - Replaces: 537328R91 (4-1/2” dia.) parts Electrical 4186 (All using round warning light) Parts, ABC1243 $5.99 Amber Lens only (For ABC4098) Replaces: 394129R91, 531627R91, 3123675R92, 199954A1, 67538C92 ABC4093 $41.99 LED Amber Cab/Canopy Warning Light (4” dia. w/ 1/2-20” mounting stud) fits: Case IH 9110 - 9180, 9210 - 9280, 9310 - 9390, Replaces: A187626 NOTE: See website for dimensions & ABC1439 $3.99 6-volt Bulb, Double contact (For ABC544, detailed information. ABC548) ABC3899 $10.95 12-volt LED Flasher Unit fits: Tractors, ABC3538 $51.95 Combines, Industrials using LED warning 12-volt LED Fender & Cab Warning lights (.230” dia. single bolt mount, 1 to Light w/ amber & red lenses fits: Same 150 watt, compact 1.090” across x 1.630” as ABC544 (4” dia. w/Tractor 1/2-20” mounting tall w/ 2 spade connections) stud) NOTE: See website for dimensions NOTE: One flasher can flash (4) lights & detailed information. simultaneously or order (1) flasher per light for separate flashes. Use w/ ABC3538, IHS3815, IHS3820 LED lights.
FromSteiner a satisfied customer! “I’ve ordered many things from Steiner and they are always friendly to talk to. My parts arrive sooner than expected and wrapped up so they aren’t trashed in shipping and the quality is tops on everything I’ve needed. Thank you Steiner Tractor Parts!” - Clay Z.
STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com 321 Light subcomponents Need just a lens, bulb or gasket? This is the place for you. For application information see the light assemblies on the previous pages or go to www.SteinerTractor.com
Light chart A IHS475 ABC320 The light subcomponents below fit IHS351R, IHS351R12V, IHS455, IHS473: IHS475 $6.00 Light Terminal IHS352 $14.99 Lens (Dimpled outer surface) w/ Guide name IHS352 ABC378 ABC388 $15.50 Lens (Smooth outer surface) w/ Guide name IHS353R $14.50 Light Ring (Bezel) IHS474 ABC388 ABC560 $4.50 Seamless Gasket ABC1115 IHS355 $3.95 Gasket IHS354 $2.99 6-volt Bulb ABC342 IHS353R IHS436 $2.99 12-volt Bulb ABC343 ABC3857 $9.49 6 or 12-volt LED Light Bulb NOTE: 27 LED chips.Inc.® ABC320 $11.50 Reflector (For Head & Work lights) ABC560 IHS918 ABC378 $19.95 Reflector (For tail lights w/ red jewel lens & 12-volt bulb in jewel lens) IHS474 $15.95 Jewel Lens w/ Base & 6-volt Bulb IHS355 IHS590 ABC1115 $14.95 12-volt Red Jewel Lens Assembly (For 29/32” mounting hole) ABC342 $1.95 6-volt Light Bulb (For 6-volt Jewel Lens) Case IH IHS354 IH/Farmall IHS942 ABC343 $1.95 12-volt Light Bulb (For ABC1115) IHS436 IHS918 $18.50 Combo Light Switch w/ Round Knob IHS590 $6.99 Parts, ABC3857 Round Plastic Knob IHS942 $8.25 Round Knurled Steel Knob Light chart H The light components below fits JDS468:
ABC462 JDS676 $19.99 Light Ring (Bezel) w/ Screw (For Sealed Beam Lights) JDS676 ABC460 ABC352 $9.50 6-volt Sealed Lo-Beam Bulb 4511 ABC353 $9.50
Electrical parts 12-volt Sealed Lo-Beam Lamp ABC462 $16.50 6-volt Sealed Hi-Beam Bulb 4510 ABC352 ABC3474 ABC460 $16.50 12-volt Sealed Hi-Beam Lamp ABC353 ABC3490 Tractor ABC3474 $49.95 12-volt Cree LED Lamp, Replaces: 4411 (4-1/2” O.D.) NOTE: Trapezoid pattern. ABC3490 $49.99 12-volt Cree LED Lamp, Replaces: 4410 (4-1/2” O.D.) NOTE: Flood pattern. Light chart F FDS454 FDS456 The light components below fits FDS172: FDS454 $15.95 Glass Tail Light Lens USA made FDS454GK $10.55 Tail Light Lens Gasket Set USA made ABC1439 FDS456 $15.95 Stainless Steel Light Ring (Bezel) SteinerFDS454GK ABC344 ABC1439 $3.99 6-volt Bulb, Double contact ABC345 ABC344 $1.99 6-volt Tail Light Bulb, Single contact ABC345 $2.49 12-volt Bulb, Single contact
322 STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm Light parts Light parts cont... Part # USD Description / Application Part # USD Description / Application IHS464 $8.59 Light Clamps (For Front & Rear Lights) IHS3890 $10.99 Warning Light Flasher Mounting Clamp fits: Cub, Cub LoBoy, C, H, M & Supers, I, fits: Cub SN: 227701 - 248124, Cub LoBoy O, W-4, 6, 9 series gas, diesel, 100 - 650 SN: 21576 & up, 154, 185, (140 SN: 26801 Replaces: 350920R1 & up), F404 SN: 2754 & up, I404 SN: 10404 NOTE: Powder coat red. & up, 424 SN: 2754 & up gas, 424 SN: 3110 IHS992 $9.99 Light Clamps (For Front & Rear Lights) & up diesel, 444, 454 SN: 6329 & up, 464, fits: Cub, Cub LoBoy, C, H, M & Supers, I, 504, 544, 574, 606, 656, 664, 666, 674, 706 - O, W-4, 6, 9 series gas, diesel, 100 - 650 1568, 4100 - 4386; Hydros: 70, 100; Some Replaces: 6780D NOTE: Cast iron. Industrials, Replaces: 394133R1 (.430” O.D. mounting hole, 1.60” I.D., IHS557 $15.99 Front Light Bracket Assembly 1.00” wide) USA made NOTE: Exact of (Post, Nut & Washer) fits: Cub, Cub LoBoy original. See website for all applications. Replaces: 351341R1 (post), 114507 (nut), 703325 (washer) NOTE: 2 required per tractor; Sold individually. Hood ornaments IHS495 $21.50 Part # USD Application Rear Tail Light Bracket fits: Cub, Cub LoBoy, Replaces: 352121R11 IHS2300 $19.99 Fits: Cub SN: 210001 - 248124, Cub LoBoy USA made SN: 10001 & up,Inc.® Cub LoBoys 154, 184, 185 (mounts on radiator cap); Fits the IH/Farmall IHS414 $11.99 LH Front Light Bracket (Forged) following Cub Cadets up to SN: 399999: IH/Farmall Case IH fits: A, Super A, B, BN, 100, 130, 140 series 70, 71, 72, 73, 100, 102, 104, 105, 122, 123, Replaces: 49394D NOTE: Use IHS414 for 124, 125, Replaces: 392718R1 LH & RH sides when ordering for B & NOTE: Chromed metal. BN. IHS733 $62.00 Fits: Some Cub Cadet tractors; All Farmall
240, 340, 404, 444, 460, 504, 544, 560, 606, parts Electrical/Chassis IHS415 $10.59 RH Front Light Bracket (Forged) 656, 660, 664, 706, 756, 826, 2404, 2444, 2504, fits: A, Super A, 100, 130, 140 series Parts, 2544; Crawlers: T4, T5, TD5 Replaces: 49393D (3-3/4” overall length) Replaces: 369180R1 NOTE: Chrome plated, NOTE: Also works for rear, fitting the B die-cast. Includes mounting screws. & BN along with the A - 140 series. IHS742 $11.49 IHS734 $3.99 (Plastic) Set Screw & Nut fits: A, Super A, B, BN, 100, 130, 140 series, Replaces: 102896, 218438 Fits: 666, 686, 766, 966, 1066, 1466, 1468, 1566, 1568, 786, 886, 986, 1086, 1486, 1586, IHS1794 $19.99 IHS735 $51.99 4366, 4386, 4568, 4586, 4786; Hydros: 70, Rear Light Bracket Assembly (Post, (Chrome Bracket, Set Screw & Nut) fits: A, B, BN plated; 86, 100, 186, Replaces: 538005R1 Tractor NOTE: Includes retaining clips. Replaces: 49393D (post), 6813D (bracket), Die cast) 102896 (set screw), 218438 (hex jam nut)
IHS565 $29.99 Rear Light Bracket fits: H, M, MTA, Supers Replaces: 353642R11 USA made NOTE: Bare steel finish. Front emblems
Part # USD Description / Application IHS3313 $25.99 Rear Tail Light Bracket fits: 230, F300, IHS294 $31.50 Front Emblem (IH Block) fits: Cub SN: F350, F400, F450, Replaces: 361995R12 185001 - 222500, Cub LoBoy SN: 501 - Steiner(4-1/2” o/a length) USA made 17200, Replaces: 362387R1 (2-9/16” W x 3” H) NOTE: Chrome IHS232 $79.99 plated w/ black background, die-cast. Light Bar only fits: H, M, Supers Includes retaining clips Replaces: 51675DC USA made IHS161 $39.99 Front Emblem (FARMALL) fits: A, AV, B, IHS535 $15.95 U-Bolt Set only fits: H, M, MD, MTA, BN, Replaces: 43658D (10-1/8” L Supers, Replaces: 59468D (3/8 NF thread) x 1-11/16” H) USA made NOTE: Polished NOTE: IHS535 mounts headlight bar to aluminum w/ black background. steering column. Front emblems continue on next page
STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com 323 Front emblems cont... Front emblems cont... Part # USD Description / Application Part # USD Description / Application
IHS207 $49.99 Front Emblem (INTERNATIONAL) IHS745 $41.25 Front / Cab Emblem fits: Cub SN: 222501 fits: Farmall A Industrial & Exported (Chrome Plated; & up, Cub LoBoy SN: 17201 & up, Cub Replaces: 54208D (10-1/8” L x 1-11/16” H) Die Cast) Cadets up to SN: 400000, 140, 154, 184, USA made NOTE: Not painted. 185, 240, 340, 404, 424, 434, 444, 460, 504, IHS194 $34.95 Front Emblem (FARMALL) fits: H, HV, M, 544, 560, 606, 660, 666, 686, 766; Early: 786, MD, MV, MDV, Replaces: 49404D 886, 966, 986, 1066, 1086, 1466, 1486, 1566, (12-1/8” L x 2-1/8” H) NOTE: Polished 1568, 1586, 2400A, 2500A, 2544; Crawlers: aluminum w/ black background. IHS835 $16.99 T4, T5, TD5; Hydros: 70, 86, 100, 186; For IHS186 $29.99 Front Emblem (McCORMICK DEERING) (Plastic) Cab only: 656, 756, 856, 1256 fits: W4, W6, W9 (up to 1947) IHS745 Replaces: 368523R4 Replaces: 56598D (12-1/8” L x 2-1/8” H) IHS835 Replaces: 2751846R1 NOTE: Not painted. (2-13/16” W x 3-3/8” H) NOTE: Includes mounting screws. IHS185 $29.99 Front Emblem (McCORMICK) fits: W4, W6, W9 (1948 & up), O4, OS4, O6, OS6, IHS747 $39.95 ODS6, Replaces: 355156R1 (12-1/8” L (Chrome x 2-1/8” H) NOTE: Not painted. Plated; Die Cast) Front Emblem fits: 544, 656, 664, 706; For IHS2032 $1.49 Stainless Steel Emblem Mounting Screw Cab only: 4100, 4156,Inc.® 4166, 4186, 4366, Kit w/ (2) countersunk slotted flathead 4386 screws fits: A, B, H, I4 - ID9, M, MD, O4 - IHS747 Replaces: 2751845R1 ODS6, W4 - WDR9 series IHS837 Replaces: 2751848R1 Replaces: 350516R1, 141888 IHS837 $16.99 (3-5/8” W x 4” H) NOTE: Stainless finish. (Plastic) NOTE: (2) Mounting holes not exposed. Case IH IHS205 $16.99 Includes mounting screws. IH/Farmall Front Emblem (IH Logo) fits: C, Super A, Super C, Replaces: 352580R1 (2” W x 2-3/16” H) Parts, IHS784 $39.95 IHS069 $14.95 Front Emblem (IH Logo) fits: Super H, (Chrome Super HV, Super M, Super MV, Super Plated; MTA, Super W4, Super W6, Super W6TA, Die Cast) Super WD6, Super W6TA diesel, Super Front Emblem fits: 756, 806, 826, 856, 1026, WD9, Super WDR9, WR9S 1206, 1256, 1456 (Cab & Grille) Replaces: 357650R1 (2-5/6” W x 2-7/8” H) IHS784 Replaces: 2751809R1 Chassis parts IHS2012 $1.49 Stainless Steel Emblem Mounting Screw IHS749 Replaces: 2751847R1 (3-5/8” W x 4” H) Kit w/ (2) countersunk slotted flathead IHS749 $16.99 NOTE: Exposed mounting holes. screws fits: Super A, C, Super C, Super (Plastic) Tractor Includes mounting screws. H, Super M, MTA, Super W4, Super W6, Super W9 diesel series, Replaces: 352581R1 NOTE: Stainless finish. Use with IHS069, IHS205. IHS206 $26.99 Front Emblem (IH Block) fits: 100, 130, IHS833 $25.99 Front Emblem fits: 284, 354, 364, 384, 385, 200, 230, Replaces: 362513R1 433, 454, 464, 484, 485, 574, 584, 585, 674, (3” W x 3-1/2” H) NOTE: Chrome plated 684, 685, 784, 785, Late 786, 884, 885, Late w/ red background, die-cast. Includes 886, Late 986, Late 1086, Late 1486, Late retaining clips. 1586, 3388, 3588, 3788; Hydros 84, 186; IHS271 $15.99SteinerFront Emblem (IH Block) fits: 300, 330, 350 Industrial: 2300A, 2400A, 2500A Row-Crop & Utility, Replaces: 362397R2, Replaces: 120397C1 365371R1 (3” W x 3-1/2” H) (3-1/4” W x 3-1/2” H) NOTE: Plastic w/ NOTE: Stainless w/ red background. silver sides. Mounting holes not exposed. Includes retaining clips. Includes mounting screws. IHS261 $16.99 Front Emblem (IH Block) fits: 400, 450, ABC374 $0.49 Emblem Push Clip (For IHS206, IHS271, W400, W450, Replaces: 362320R2 IHS261) (0.180” center hole dia. will (3-3/4” W x 4-1/4” H) expand to 0.300”) NOTE: Push Clips are NOTE: Stainless w/ red background. included w/ the listed emblems. Includes retaining clips. Sold individually.
324 STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm Front emblems cont... Side emblems cont... Part # USD Description / Application Part # USD Description / Application IHS677 $1.05 IHS512 $59.99 Side Emblem (FARMALL) fits: 300, 350, Emblem Tubular Clip (For pegs w/ .195” EACH 400, 450 (All Row-Crops) dia.) fits: Some IH models (1958 & up) Replaces: 362315R2 (2-1/8” H x 26” L) Replaces: 370786R1 NOTE: Stainless steel. IHS375 $36.99 Side Emblem (300) (For Row Crop EACH models only), Replaces: 362396R1 Side emblems (6” W x 3-1/8” H, 4 1/2” c.c) NOTE: Stainless steel. NOTE: Includes mounting hardware. Sold individually
Part # USD Description / Application IHS373 $36.99 Side Emblem (350) (For Row Crop EACH models only), Replaces: 366679R1 IHS409 $104.50 Side Emblem (FARMALL CUB) (6” W x 3-1/8” H, 4 1/2” c.c) EACH fits: Cub SN: 185001 - 210000 NOTE: Stainless steel. Replaces: 362386R2 (16” long) USA made NOTE: Stainless steel. IHS361 $25.99 Side Emblem (400) (For Row Crop, EACH IHS305 $50.99 Side Emblem (INTERNATIONAL CUB) Wheatland models), Replaces: 362314R1 EACH fits: Cub LoBoy SN: 501 - 10000 (6” W x 3-1/8” H, 4 7/8” c.c) Replaces: 364044R1 (16” long) NOTE: Stainless steel. NOTE: Stainless steel. Retaining clips IHS362 $25.99 Side EmblemInc.® (450) (For Row Crop, are included. EACH Wheatland models), Replaces: 366680R1 IH/Farmall IH/Farmall IHS411 $39.99 (6” W x 3-1/8” H, 4 7/8” c.c) Vertical Side Emblem (LoBoy) Case IH EACH NOTE: Stainless steel. fits: IH Cub LoBoy up to SN: 10000; IHS698 $29.99 Farmall Cub LoBoy SN: 185001 - 210000 EACH Side Emblem (TORQUE AMPLIFIER) Replaces: 364045R1 (1” W x 5-7/8” L) fits: Super MTA, 300, 330, 350, 400, W400, NOTE: Stainless steel. 450, W450, Replaces: 362394R1 Chassis parts IHS408 $39.99 Side Emblem (McCORMICK) IHS712Parts, $45.50 EACH fits: Cub SN: 185001 - 210000, Cub LoBoy EACH Side (Oval) Emblem fits: 460 Row Crop up to SN: 10000; 100, 130, 200, 230 gas, Replaces: 369119R1 Replaces: 362389R1 (1/2” H x 5-7/8” L) NOTE: Stainless steel. IHS714 $45.50 IHS513 $51.50 Side Emblem (FARMALL) fits: 100, 130, EACH EACH 200, 230, Replaces: 389507R9, 362512R2 Side (Oval) Emblem fits: 460 Row Crop (1-1/4” H x 16” L) NOTE: Stainless steel. diesel, Replaces: 369121R1 IHS290 $25.99 EACH Side Emblem (100), Replaces: 362509R1 IHS716 $45.50 EACH (3-1/2” W x 1-7/8”Tractor H, 2-11/16” c.c) Side (Oval) Emblem fits: 560 gas NOTE: Stainless steel. Replaces: 369127R1
IHS291 $49.95 EACH Side Emblem (130), Replaces: 366721R1 IHS718 $45.50 (3-1/2” W x 1-7/8” H, 2-11/16” c.c.) EACH Side (Oval) Emblem fits: 560 diesel USA made NOTE: Stainless steel. Replaces: 369129R1
IHS292 $25.99 EACH Side Emblem (200), Replaces: 362515R1 IHS741 $81.99 Side Emblem w/ Mounting Hardware (3-1/2” W x 1-7/8” H, 2-11/16” c.c.) EACH SteinerNOTE: Stainless steel. fits: 460, 560, Replaces: 369117R1 IHS293 $49.95 IHS743 $81.99 Side Emblem w/ Mounting Hardware EACH Side Emblem (230), Replaces: 366723R1 EACH fits: 504, 656, 706, 806, 1206 (3-1/2” W x 1-7/8” H, 2-11/16” c.c.) Replaces: 377796R1 USA made NOTE: Stainless steel. (2-5/8” wide, 30-1/2” long)
IHS767 $89.50 Side Emblem w/ Mounting Hardware IHS511 $51.50 Side Emblem (McCORMICK) EACH fits: 756, 826, 856, 1026, 1256, 1456 EACH fits: 300, 350, 400, 450 (All Row-Crops) Replaces: 2753920R1 Replaces: 362317R1 (3/4” H x 9-1/2” L) NOTE: Stainless steel. Side emblems continue on next page
STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com 325 Side emblems cont... Serial number tags - USA made cont... Part # USD Description / Application Part # USD Description / Application
IHS720 $45.50 IHS289A $19.99 Serial Number Tag w/ Rivets Side Emblem fits: 706 gas EACH fits: Cub, A, B, C, H, M (Early style Replaces: 381554R1 NOTE: Aluminum 1939-49) (Serviceable for Super A to w/ black background & creme numbers. 1950) (2-1/4” x 4)
IHS722 $45.50 IHS289B $19.99 Serial Number Tag w/ Rivets Side Emblem fits: 706 diesel EACH fits: Cub, C, H, M, Supers; Serviceable Replaces: 381555R1 NOTE: Aluminum for Super A, W6 (Later style 1950 - w/ black background & creme numbers. approximately 1955) (2-1/4” x 4) IHS724 $47.99 IHS289AFC $19.99 Serial Number Tag w/ Rivets EACH Side Emblem fits: 806 gas Replaces: 381557R1 NOTE: Aluminum fits: C (goes on seat base) (Early style w/ black background & creme numbers. 1948-49) NOTE: The “FC” is already printed. IHS726 $47.99 IHS289BFC $19.99 Serial Number Tag w/ Rivets EACH Side Emblem fits: 806 diesel Replaces: 381558R1 NOTE: Aluminum fits: C (goes on seat base) (Later style w/ black background & creme numbers. 1950 & up) (2-1/4” x 4) NOTE: The “FC” is already Inc.®printed. IHS783 $96.99 Side Emblem fits: 1206 IHS2087 $19.99 Serial Number Tag w/ Rivets fits: Cub, EACH Replaces: 2752935R1 USA made Cub LoBoy (except 154, 184, 185), 100, NOTE: Anodized aluminum. Made 130, 140, 200, 230, 240, 300, 330, 340, from original tooling. 350, 400, 404, 424 (through 1964), 450, JDS630 $0.70 460, 504 (through 1964), 560, 600, 606 Case IH Push Clip only(For most side emblems
IH/Farmall (through 1964), 650, (656 through 1967), up to 1958 w/ .125” dia. pegs) 660, T340, TD340, Super W9, Super Replaces: 363784R1 USA made Parts,WD9, Super WDR9, WR9S, W400, W450 (1956 & up) (2-1/4” tall x 4” long) ABC373 $0.40 Emblem Push Clip (For pegs up to .125” ABC464 $0.49 dia.) fits: IH / Farmall models Rivet only (For Serial Number Tags) (Center hole dia. = 0.100” & will expand (6 x 3/8”, .135” shank O.D.) to 0.150”) NOTE: Push clips are NOTE: Steel. Sold individually. included w/ the emblems. Customer may need to drill the tag for the rivet. IHS677 $1.05 Emblem Tubular Clip (For pegs w/ .195” ABC1585 $0.79 Rivet only (For Serial Number Tags)
Chassis parts dia.) fits: Some IH models (1958 & up) Replaces: 370786R1 (0.347” o/a length, 1/8” shank O.D.) NOTE: Brass. Sold individually. Tractor Customer may need to drill the tag for the rivet. Serial number tags - USA made IHS1595 $21.50 • Blank w/ rivets. Serial Number Tag w/ Rivets fits: Some • You stamp your serial number. 504, 706, 756, 806, 826, 856, 1206 1256 (1-1/4” x 3-1/2”) Part # USD Description / Application
IHS762 $26.99 IHS1589 $21.50 Serial Number Tag w/ Rivets fits: 154, Serial Number Tag w/ Rivets 284, 544, 656, 666, 686, 756, 766, 826, fits: F12, F14, F20, F30, W30, W40 966, 1026, 1066, 1256, 1456, 1466, 1468, (2-15/16” x 6-1/8) 1566, 1568, Hydro 70; Will also fit 86, Steiner 88 series but font is larger; Also fits as a IHS764 $25.95 Serial Number Tag w/ Rivets cab serial number tag for 86 series fits: 10-20 (1-5/8” x 3-1/2”) (2-15/16” x 6-1/8) ABC2675 $0.49 Rivet only (For Serial Number Tags) fits: 154, Hydro 70, 504, 544, 656, 666, IHS757 $21.50 686, 706, 756, 806, 826, 856, 966, 1066, Serial Number Tag w/ Rivets 1206, 1256, 1456, 1466, 1468, 1568 fits: 15-30 (#2 x 3/8”, .100 shank dia. (2-15/16” x 6-1/8) NOTE: Steel. Sold individually.
326 STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm Hand crank brackets Front grilles, parts
Part # USD Description / Application Part # USD Description / Application IHS2018 $6.99 Hand Crank Bracket w/ Screw fits: Cub, What makes our IHS197 & IHS198 the best on the market? Cub LoBoy, Replaces: 351013R1, 171573 1) Have correct angle for a perfect fit! (screw) (0.218” O.D. mounting holes) 2) Have correct wire screen! USA made NOTE: Bolts to foot platform 3) USA MADE! by gear shift lever. 2 used per tractor; IHS197 $59.99 Sold individually. Bare finish. Lower Grille Insert w/ Screen fits: H, HV, Super H, Super HV IHS404 $19.50 Hand Crank Mounting Bracket fits: A, Replaces: 48963DXA Super A, AV, Super AV, B, BN, 100, 130, 140 IHS198 $69.99 Replaces: 350639R91 Lower Grille Insert w/ Screen fits: M, MD, MTA & Supers Replaces: 50204DXA
NOTE: For best results fit lower grille inserts w/ screen to Starter hand cranks, part - USA made tractor before painting. Part # USD Description / Application IHS345 $48.50 Grille Repair Patch fits: M, MD, MTA, Supers USA made NOTE: Exact IHS543 $49.99 Starter Hand Crank w/ Pin & Spinner reproduction of lower bar. Not factory fits: Cub, Cub LoBoy, Replaces: 351010R31, Inc.® as separate piece which is usually 351011R1 (pin) (13-1/4” to first bend, damaged. The damaged grille bar must IH/Farmall 5/8” dia.) IH/Farmall
be cut out & IHS345 must be welded Case IH IHS401 $31.50 on, which goes BELOW grille insert Starter Hand Crank w/ Pin & w/out (IHS198). Spinner fits: Cub, Cub LoBoy IHS208 $29.99 (13-1/4” to first bend) Wire Grille Screen fits: Cub, A, B, C, H, M, Supers, W4, 6, 9, 100, 130, (140 up to SN: Chassis parts IHS544 $56.95 Starter Hand Crank w/ Pin & Spinner Parts,23300), 200, 230, 240, 300, 330, 340, 350, fits: A, Super A w/ 113 engine, B; The 400, 450, 460, 560, 600, 650, 660 (2’ x 3’) following w/ Tricycle front only: C, 200, NOTE: 5 squares per inch. 230, 340, 404, 504, Replaces: 47961DBX, 53385DBX; 15204D (pin) MIS100 $6.99 (12-3/4” to first bend, 3/4” dia.) Wire Screen Clips (Package of 6) IHS545 $56.99 Starter Hand Crank w/ Pin & Spinner (For IHS208 & IHS4487) fits: Super A w/ 123 engine, 100, 130; The following w/ Tricycle front only: Super C, IHS953 $1.29 200, 230, 240, 340, 404, 504 Dash Support & Grille Truss Head Screw Replaces: 357750R11; 15204D (pin) Fits Grille: Farmall Cub up to SN: 222500, (16-3/4” to first bend, 3/4” dia.) Cub LoBoy up to SN: 17200; Tractor Fits Dash Support: Farmall Cub (1947-64), IHS3195 $64.50 Starter Hand Crank w/ Pin & Spinner International Cub (1964-79), Cub LoBoy fits: C, Super C, 200, 230, 240, 340, 404, 504 (1955-68), Replaces: 144531, 85700996 (Farmall Rowcrops only w/ wide front NOTE: Stainless. 4 used for grille, 4 used axle), Replaces: 352496R93; 15204D (pin) for dash support; Sold individually. (20” to first bend, 3/4” diameter) IHS073 $99.50 NOTE: Will not fit utilities.
IHS546 $71.75 Starter Hand Crank w/ Spinner fits the Front Grille Screen (Mesh) fits: All round, following w/ Tricycle front only: H, M, red Cubs up to SN: 185000 (1947-53) Supers, F300, F350, F400, F450 gas, LP Replaces: 350979R11 USA made SteinerReplaces: 51544DBX (17” to first bend, 7/8” dia.) NOTE: Will not fit diesels. IHS1611 $224.50 IHS3888 $8.99 Starting Crank Pin fits: 10-20, 15-30, 22-36, Grille Cowling fits: 154, 185 400, 450, 600, 650, F20, F30, I, M, MD, Replaces: 404686R Supers, O, Regular, Super MTA, W6, W9 NOTE: Fiberglass. Primer only. Wet sand series, W30, W400, W450, WD40 w/ fine paper prior to painting. Replaces: 10319D, 455238R1, 70918245 (1/2” O.D.. 2-1/2” o/a length) NOTE: Restoration quality. Front grilles, parts continue on next page
STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com 327 Front grilles, parts cont... Front grilles, parts cont... Part # USD Description / Application Part # USD Description / Application IHS2662 $82.75 IHS1110 $119.95 Grille Screen fits: Same as IHS3103 Mesh Grill Insert fits: 154, 185 Replaces: 65492C1 Replaces: 106742C1, 533556R1 (19-7/16” tall, 20-5/16” wide, 1” thick) USA made
IHS2436 $224.99 IHS604 $129.99 Fiberglass Grille Cowling fits: 184 (Plastic) Replaces: 132247C1 NOTE: Primer only. Wet sand w/ fine paper prior to painting. Front Grille fits: 766, 786, 886, 966, 986, 1066, 1086, 1466, 1468, 1486, 1566, 1568, 1586, Hydro 100, Hydro 186 IHS2668 $83.95 IHS610 $199.95 IHS604 Replaces: 531231R1 Mesh Grille Insert fits: 184 (Steel) IHS610 Replaces: 531231R1 Replaces: 132263C1 USA made
IHS3884 $7.89 Radiator Grille Fastener Screw fits: A, AV both SN: 41330 & up, Super A, Super AV, Inc.® (B, BN both SN: 40193 & up), C, Super C IHS609 $69.99 Replaces: 58141D, 58141DA Grille Screen only fits: Same as IHS604 (5/16-24 NF, .285” thick, .563” hex head, Replaces: 531233R2 .793” o/a length) USA made (7 holes per inch) USA made NOTE: 3 used per tractor; Sold
Case IH individually. Exact of the original. IHS970 $105.50
IH/Farmall Headlight Support Panel (Upper Grille) FDS311 $4.29 Grille Screen Spring fits: 404, 504, 606, fits: Same as IHS604 706, 756, 2404, 2504, 2606,2706, 2756; Cub Parts,Replaces: 71780C1, 531217R1 Cadets: 72, 73, 104, 105,106, 107, 124, 125, (27” wide x 9-5/8” tall) 126, 127, 147 (All up to SN: 400000) NOTE: Silver & black plastic. Replaces: 391347R1
IHS872 $39.99 Lower Grille Shell Panel fits: 574, 674, Hoods, hardware 2500A series, Replaces: 402427R1 (6-9/16” tall x 16-7/16” long) USA made Part # USD Description / Application NOTE: Primed gray. IHS471 $275.49 Chassis parts BACK IN STOCK! Hood fits: A SN: 41330 & up, B & BN both SN: 40193 & up, Super IHS3254 $109.99 Front Lower Bar Grille fits: Some IH 384, A, Replaces: 58144DX (25-1/2” long) 385, 484, 485, 584, 585, 684, 685, 784, 785, Tractor USA made NOTE: Will not fit tractors 884, 885, Hydro 84, Replaces: 3121672R1 w/ dzus fasteners. (17-1/4” tall, 18” wide) NOTE: Measure before ordering as there was more than IHS376 $299.99 one grille used for most applications. For BACK IN STOCK! Hood fits: C, Super C tractors w/ headlights that are separate Replaces: 351090R11 (26-3/4” long) from the grille. Fit to tractor BEFORE USA made painting. Does not fit Case IH tractors. IHS702 $169.99 Front Grille w/ Black Metal Screen Insert IHS319 $59.85 Hood Hardware Kit fits: A, B, C, Supers, (For tractors w/ grille mounted lights) 100, 130, 140, 200, 230 fits: 354, 364, 454, 464, 574, 674 Industrials: Steiner Replaces: 58146D (LH), 58147D (RH) 2300A, 2400A, 2500A, Replaces: 537496R1 USA made NOTE: Kit includes: (2) LH (20” tall x 16-1/4” wide) NOTE: Plastic. j-hooks, (2) RH j-hooks, (4) springs, (4) IHS3103 $159.99 cotter pins & (4) washers. Front Grille fits: 666, 686, Hydro 70, Hydro 86, Replaces: 65491C1 IHS1588 $15.95 J-Hook fits: H, M, Supers, I, W4, W6 series (19-3/4” wide, 19-1/16” tall) USA made gas, diesel, Replaces: 48707DA, 50997D NOTE: Silver painted steel. Must drill USA made NOTE: Includes: (1) J-hook, (2) 3/8” holes in existing casting to retain (1) spring & (1) cotter pin. 4 used; top of grille. Sold individually.
328 STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm Hoods, hardware cont... Hoods, hardware cont... Part # USD Description / Application Part # USD Description / Application
IHS773 $1.39 Hood Wing Nut fits: M, Supers gas, diesel IHS2014 $3.99 Hood and Sheet Metal Bolt fits: 240, 340, Replaces: Q3506, 103129, 126032 404, 424, 444, 460, 504, 544, 560, 606, F656, NOTE: Fastens rear of hood to gauge (666 - 1568 as a dash panel bolt) panel. Replaces: 369222R1 (5/16” - 18 NC x 5/8”) USA made NOTE: Sold individually. IHS2676 $4.99 Hood Wing Nut Washer fits: M, Supers See website for full applications. gas, diesel, Replaces: 60707D USA made IHS1288 $16.99 1/4 Quick Release Fastener Nut fits: 140 NOTE: Zinc plated. up to SN: 23300 (2 used on grille); 240, 340, 460, 560, 660 (2 used on grille & 4 used on IHS439 $2.99 Hood Bolt (Truss Head w/ Washer) side panels), Replaces: 369866R1 fits: 300, 330, 340, 350, 400, 450 IHS448 $2.99 USA made NOTE: Sold individually. IHS439: Replaces: 362664R91 (5/16” - 18NC coarse thread) IHS1285 $6.75 Flanged Hex Head Bolt fits: 340, 385, 460, 484, 560, 660, 766, 786, 886, 966, 986, 1066, IHS448: Replaces: 362662R91 1086, 1466, 1468, 1486, 1566, 1568, 1586, (5/16” - 24NF fine thread) Hydro 186, 3388, 3588, 3788 NOTE: Sold individually. Replaces: 369918R1, 463-42510 (1/4”-20 NC x 5/8”) USA made IHS946 $2.50 Cage Nut fits: Farmall Cub SN: 210001 & NOTE: Sold individually.Inc.® See website for up, IH Cub SN: 10001 & up, 140, 154, 184, full applications. IH/Farmall 185, 240, 300, 330, 340, 350, 400, 404, 424, IH/Farmall
444, 450, 454, 460, 464, 484, 504, 544, 560, IHS919 $10.29 Knurled Hood/Battery Cover Fastener Case IH 574, 584, 606, 656, 660, 674, 684, 706 - 1206, fits: 460, 560, 660, Replaces: 374240R1 756 - 1456, 826, 1026, 766 - 1568, 786 - 1586, (fastener), 372689R1 (retainer) Hydro 100 & all Industrial versions (1/4”-20 NC, 1.315” o/a length) Replaces: 88592, 131883, 363885R1, USA made NOTE: Sold individually. IHS1557 $10.95 459063R1, 1502286C1 (5/16”-18 NC) Slotted Thumb Screw w/ Retainer Chassis parts NOTE: Sold individually. Parts,fits: 404, 424, 444, I504, 544, 656, 706, 756, IHS973 $4.99 Hood & Sheet Metal Retaining Shoulder 806, 826, 856, 1026, 1206, 1256, 1456 Bolt fits: 544, 656, 666, 686, 706 - 1586; Replaces: 376787R1 (retainer), 3112170R11, Hydros: 70 - 100, Replaces: 373483R1 377521R1,R3, 389872R1 (screw) (5/16”-18 NC x 11/16” length, shoulder (5/16”-18 NC x 3/4”, 1.100” o/a length, bolt w/ 9/16” hex head) USA made .775” dia. head) USA made NOTE: Sold individually. NOTE: Retains lower hood side panels. 4 used per tractor; Sold individually. IHS2041 $0.90 Hood and Side Panel Washer fits: 766 - 1568, 786 - 1586, 1026; Hydros: 100, 186 (All using IHS973 bolt) Replaces: 536653R1 (1/4”-20Tractor NC thread, Hood extensions, hardware 1.315” o/a length) NOTE: Rubber. Part # USD Description / Application IHS4727 $1.99 IHS190 $62.50 Hood Extensions (Dog Legs), Pair NEW! Hood Washer fits: 766 - 1568, 786 fits: (Red) Cub up to SN: 210000 & Cub - 1586, 1026; Hydros: 100, 186 (All using LoBoy up to SN: 10000 IHS973 bolt), Replaces: 536652R1 Replaces: 350985R11, 350984R11, 373884R11, 373883R11 USA made IHS1245 $4.99 Hood & Sheet Metal Bolt w/ Washer NOTE: Sold as a LH / RH pair. After fits: 544, 656, 666, 686, 706 - 1206, 756 - painted customer must run a tap or thread 1456, 826, 1026; Hydros: 70, 86 chaser through the spot welded nuts to SteinerReplaces: 389427R91 clean the paint out,otherwise customer (5/16”-18 NC x 3/4”) USA made will run the risk of breaking the spot NOTE: Sold individually. welds on the nuts. IHS1365 $4.99 Hood & Sheet Metal Bolt fits: 544 - 686, IHS955 $0.69 Round Head Screw & Washer (For Hood 706 - 1456, 766 - 1586; Hydros: 70, 86, 100, Dog Legs) fits: Farmall Cub (1947-63), IH 186, Replaces: 385157R1 Cub LoBoy (1955-63), Replaces: 120221 (5/16”-18 NC x 5/8” flanged hex head) (screw); 106497, 80684 (washer) USA made NOTE: Has recess in center NOTE: Stainless. 4 used per dog leg of hex head w/ correct finish. Sold (8 per tractor); Sold individually. individually.
STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com 329 Side panels, parts Side panels, parts cont...
Part # USD Description / Application Part # USD Description / Application IHS192A $369.99 IHS1126 $42.50 (w/ Exhaust (LH) Hole) Front Lower Ribbed Side Panel fits: 560, 660 Side Panels, Pair fits: 10-20 McCormick IHS1126 Replaces: 369672R1 IHS1128 Replaces: 369673R1 Deering, Replaces: 10679DX, 10680DX IHS1128 $42.50 (34-7/8” o/a length) IHS192B $369.99 (33-9/16” x 21-15/16) USA made (RH) (w/out NOTE: Sold as a LH / RH pair. NOTE: Will fit F460 if trimmed to Exhaust Close out. 31-1/2” & 1 hole drilled. Hole)
IHS954 $45.50 (LH)
IHS2341 $34.99 LH Lower Dash Side Support Panel Rear Lower Ribbed Side Panel fits: 154 up to SN: 18708 fits: F460, 560, 660Inc.® Replaces: 404829R1 USA made IHS954 Replaces: 369187R1 IHS956 $45.50 NOTE: Close out. IHS956 Replaces: 369188R1 (RH) (38-1/4” long, 6-5/8” wide) IHS2324 $34.99 LH Lower Dash Side Support Panel fits: 154 SN: 22332 & up; 185 Case IH
IH/Farmall Replaces: 404829R2 USA made NOTE: Close out. IHS889L $35.99 (LH) Parts, IHS2320 $34.99 Rear Heat Baffle Shield RH Lower Dash Side Support Panel fits: 766, 966, 1468, 1568 fits: 154, 185 (RH side only); 184 (RH & IHS889L Replaces: 531499R1 LH), Replaces: 404830R2 USA made IHS889R Replaces: 531500R1 IHS889R $35.99 NOTE: Close out. (19-3/4” long x 6-1/4” wide) (RH) USA made IHS2439 $89.95 NOTE: Bare metal.
Chassis parts Dash Cowling (Rear Hood) fits: 154, 184, 185, Replaces: 404585R2 NOTE: Fiberglass. Primer only. Wet IHS887L $35.99 sand w/ fine paper priorTractor to painting. (LH) Rear Heat Baffle Shield IHS792 $81.99 fits: 1066, 1466, 1566, Hydro 100 Instrument Panel Housing fits: 766, 966, IHS887L Replaces: 531507R1 1066, 1466, 1468, 1566, 1568, Hydro 100 IHS887R Replaces: 531508R1 Replaces: 531038R1 IHS887R $35.99 (19” long x 6-1/4” wide) NOTE: Cast aluminum. (RH) USA made IHS1267 $104.50 NOTE: Bare metal. (LH) Front Side Panel fits: 484, 485, 584, 585, 684, 685, 784, 785, 884; 885 w/ 4 wheel Steinerdrive (All through 1985); (IH only NOT IHS855 $59.99 Case IH) (LH) Front Radiator Side Panel w/out IHS1267 Replaces: 3121395R1 Louvers fits: 786, 886, 986, 1086, 1486, IHS857 $59.99 IHS1270 Replaces: 3121396R1 (RH) 1586, Hydro 186; Serviceable for 766, IHS1270 $104.50 (11-1/2” tall x 14-3/8” at longest point) 966, 1066, 1466, 1468, 1566, 1568, Hydro (RH) USA made NOTE: Parts are gel coated 100 w/ a wax release agent on surface. We IHS855 Replaces: 531063R3 recommend a wet sand w/ fine paper IHS857 Replaces: 531064R3 prior to painting. The release will not USA made allow paint to adhere. Close out. IHS855 IHS857 NOTE: Primed.
330 STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm Air cleaner parts Air cleaner parts cont...
Part # USD Description / Application Part # USD Description / Application Caps Oil cups, clamps, part IHS982 $25.95 Air Cleaner Cap w/ Reinforcing IHS928 $15.75 Air Cleaner Cup Bail fits: Cub, Cub Washer fits: 10-20, 15-30, 22-36, Regular, LoBoy, Replaces: 352163R2 F20, F30, T20, TD35, W30, WD40, WK40 USA made Replaces: 11196D (cap), 17190D (reinforcing washer) (6-3/16” O.D. x IHS179 $20.95 3-7/32” tall, 3” O.D. x 1/4” tall) Air Cleaner Oil Cup fits: A, AV, B, BN, USA made NOTE: Bare steel. Early Super A up to SN: 355669 IHS984 $22.95 Air Cleaner Cap fits: F12, F14, I12, I14, Replaces: 52871D (4-7/16” O.D. at lip; W12, W14, Replaces: 23647D 4-1/16” I.D) (3-5/8” O.D. x 2-1/2” tall) USA made IHS181 $10.59 NOTE: Weld to existing pipe. Bare steel. Air Cleaner Oil Cup Clamp fits: Same IHS392 $36.99 Air Cleaner Cap fits: Cub, Cub LoBoy, as IHS179, Replaces: 52872D (1-1/4" O.D.) A, AV, B, BN, Early Super A up to SN: 3.06" 355669, Replaces: 350750R91 (1-1/4” O.D.) NOTE: Fits inside of FDS034 $15.95 Air CleanerInc.® Oil Cup (Clamp-Style) pipe for Supers & Late Cub. 3.06” Serviceable for Late Super A SN: 356001 & up, C, Super C, 100, 130, 140, 200, IH/Farmall body dia. IH/Farmall
230; Crawlers: T4, T5 Case IH IHS390 $36.99 Air Cleaner Cap fits: Late Super A SN: (All w/ Donaldson air cleaner) (1-3/4" I.D.) 356001 & up, Super A1, C, Super C, 100, Replaces: 352597R91 (4-15/32” I.D., 4-1/4" 130, 140, 200, 230, 240, 340 4-3/4” O.D. at lip, 3” high) NOTE: (All w/ Donaldson or United Check measurement before ordering. Specialties Air Cleaner)
FDS081 $11.95 Chassis parts IHS390: Replaces: 351189R91 Parts, (1-3/4” I.D.) Clamp (For FDS034) IHS597 $36.99 NOTE: IHS390 fits outside of pipe. Replaces: 66357DA (1-5/8" O.D.) 4-1/4” body dia. 4.595" IHS597: Replaces: 351190R91, 361723R91 (1-5/8” O.D.) JDS540 $28.99 Air Cleaner Oil Cup fits: H, I, O, W4, NOTE: IHS597 fits inside of pipe for Supers, series 300, 350, F, I, 340 w/ Supers & later. 4.595” body dia. Donaldson Air Cleaner, 404, 424, F504 Replaces: 52864DA, 362974R91, IHS394 $36.99 375550R91, 378333R1 (2" I.D.) Air Cleaner Cap fits: H, Supers, I4, W4, (5-3/8” I.D., 5-3/4” O.D.) 5-1/4" 300, 350 gas, dieselTractor Replaces: 49461DA (2” I.D.) JDS541 $12.95 NOTE: Fits outside of pipe. Clamp fits: Same as JDS540 5-1/4” body dia. Replaces: 52865D
IHS620 $36.99 (2-1/8" O.D.) Air Cleaner Cap fits: M, MTA & Supers, Pipes, parts I, T, W6, 400, 450 gas, diesel 5-1/4" IHS215 $18.85 Replaces: 353018R92 (2-1/8” O.D.) NOTE: Fits inside of pipe for Supers Air Cleaner Pipe fits: Cub up to SN: & later. 5-1/4” body dia. 248124 w/ IH carburetor Steiner Replaces: 350752R1 IHS282 $51.95 Air Cleaner Cap fits: 340, 404, 424, 444, 504 gas, 2424, 2444 IHS967 $29.95 Replaces: 353019R92 (2-1/8” O.D., 2” I.D) USA made Air Cleaner Pipe fits: H, HV, I4, W4 Replaces: 51437D ABC1826 $58.50 Air Cleaner Cap fits: 460, 560, I656, 660 (1-3/4” O.D., 12-3/4” o/a length) Replaces: 361722R91, 365316R91 (2-1/2” I.D., 5-1/4” O.D., 4” tall) USA made Air cleaner parts continue on next page
STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com 331 Air cleaner parts cont... Wittek© tower (hose) clamps Part # USD Description / Application USA made Pipes, parts cont... Fits: IH / Farmall models IHS1504 $36.50 Air Cleaner Pipe fits: M, MV, Super M, Original Style Super MV, MTA, Super MV-TA, (Super Part # USD Specifications W6 SN: 3951 & up), Super W6-TA, 400, IHS636 $4.99 (.775” - 1.013” size range) 450, W400, W450 gas, LP Replaces: 51441D, 357028R1 IHS637 $5.49 Replaces: 39135H (2-1/4” O.D.) (1.687” - 1.780” size range) IHS638 $5.99 Replaces: 55624D ABC422 $13.95 Air Cleaner Oil Bath Filter Element (1.815” - 2.001” size range) (3” wide x 78” long) NOTE: Replaces the mesh in existing air cleaners. Sold IHS639 $5.99 Replaces: 45445D by the bag. Normal utility air cleaners (1.975” - 2.285” size range) will use 2 bags. IHS640 $4.99 Replaces: 91406HA Hoses (2.175” - 2.500” size range) FDS261 $5.59 Air Cleaner Hose fits: Farmall Regular, IHS641 $6.15 (2.400” - 2.625” size range) F12, F14, F20, F30, 10-20, 15-30, 22-36, IHS642 $6.05 T20, W30, F300 gas, F350 gas, 424 Replaces: 45813D diesel, 444 diesel, 504 gas (2.350” - 2.765” sizeInc.® range) Replaces: 11337D, 362759R1, 362760R1 IHS643 $6.25 (2.685” - 2.995” size range) (2” I.D., 2-1/4” long) NOTE: Carburetor to air cleaner. FDS260 $4.59 Air Cleaner Hose fits: C, Super C, 100, Case IH 130, 200, 230 (All using Donaldson air Worm drive hose clamps IH/Farmall cleaners), Replaces: 48861DB, 362757R1 USA made (1-1/2” I.D., 2-7/16” long) Parts,NOTE: Premium stainless stainless. Sold in packs of 10. IHS3289 $24.50 Carburetor to Air Cleaner Hose fits: IH Part # USD Specifications 300, 350 Utilities (both gas or distillate only), Replaces: 361978R1 ABC4133 $6.99 (5/16” - 5/8” range, 5/16” band width) NOTE: Does not fit diesel or LP. ABC4142 $7.59 (3/8” - 7/8” range, 5/16” band width)
IHS3316 $12.50 Air Cleaner Hose fits the following gas ABC4147 $7.99 (7/16” - 1” range, 5/16” band width) tractors as a carburetor to air cleaner ABC4151 $9.59 (1/2” - 1-1/16” range, 1/2” band width) Chassis parts pipe hose: 656, (Late 706 & 806 w/ ABC4155 $9.59 (1/2” - 1-1/4” range, 1/2” band width) 2-1/2” hose), 756, 766, 826, 856; Also ABC4158 $9.99 (11/16” - 1-1/2” range, 1/2” band width) fits the following gas tractors as an upper air cleaner hose:Tractor Late 454, 464, ABC4161 $10.95 (3/4” - 1-3/4” range, 1/2” band width) 544 Hydro, Late 574, 674 (All using ABC4165 $10.99 (1” - 2” range, 1/2” band width) 2-1/2” ID hose), Replaces: 382400R1, ABC4180 $13.99 (1” - 3” range, 1/2” band width) 529313R1, 529313R11, 922025C1 ABC4169 $10.99 (2-1/2” I.D., appx. 7-1/2” outer curve (1-1/4” - 2-1/4” range, 1/2” band width) length) ABC4172 $11.99 (1-1/2” - 2-1/2” range, 1/2” band width) Miscellaneous ABC4176 $11.99 (1-3/4” - 2-3/4” range, 1/2” band width) ABC2443 $15.99 ABC4184 $13.99 Dust Unloader Valve (Vacuator Valve) (2-1/4” - 3-1/4” range, 1/2” band width) (For Dry Air Cleaners) fits: Some 154, ABC4188 $14.99 (2-1/2” - 3-1/2” range, 1/2” band width) Steiner424 gas, 444 gas, 504 diesel, 544 gas ABC4204 $17.95 (2-1/2” - 4-1/2” range, 1/2” band width) Replaces: 324194R1, 563739, 576239 ABC4192 $15.99 (2-3/4” - 3-3/4” range, 1/2” band width) (1” I.D.) ABC4196 $15.99 (3” - 4” range, 1/2” band width) ABC1765 $15.95 Dust Unloader Valve (Vacuator Valve) ABC4200 $15.99 (3-1/4” - 4-1/4” range, 1/2” band width) (For Dry Air Cleaners) fits: Some 656 - ABC4206 $99.99 (130-pc. assortment; Display rack: 4586 using 3” unloader valve 5/16” - 2-3/4” range) NOTE: Includes Replaces: 383734R2, 625043C1 20 each: ABC4133, ABC4142, ABC4155, NOTE: Measure before ordering. See ABC4161, ABC4169, ABC4176 & 10 each: website to confirm applications. ABC4151.
332 STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm Pre-cleaner assys., parts Pre-cleaner assys., parts cont... Part # USD Description / Application Part # USD Description / Application ABC1824 $61.50 ABC338 $13.99 Pre-Cleaner Bowl (For 2” to 3” inlet) Pre-Cleaner Cap Assembly fits: B275, fits: Some H, M, Supers, W6 - 9 series, 340, 350, 404, 424, 444, 504 gas, 3414 400, 450, 460, 504, 544 diesel, 560, 600, (All w/ 2” I.D. base & 5-1/2” bowl) 606, 650, 660, 2504, 2544 diesel, 2606; Replaces: 407076R91 USA made Gas powered Combines: 403, 453 Hillside, 503, 615, 715 ABC554 $49.99 Pre-Cleaner Cover w/ Brass Knurled Replaces: 365413R1, Can replace Nut fits: Some Super A, C, Super C, 100 Donaldson bowl P020227 - 240, B275, F300, 340, F350, 404, 424, NOTE: Clear plastic. 444, I544 (All w/ 5-7/16” I.D. & 5-1/2” ABC338 specifications: Bowl O.D. at top = 7", Bowl side height = bowl), Replaces: 362999R91 USA made 3", Cone I.D. at top = 3-1/2", Overall height = 4-1/8" NOTE: Aluminum. JDS557 $69.99 Pre-Cleaner Base (For ABC338 Bowl ABC484 $24.95 Pre-Cleaner Bowl fits: Some Super A, & JDS559 Top) fits: I544 diesel, 2544 C, Super C, 100 - 240, B275, F300, 340, diesel; Combines: 403, 503, 615, 715 F350, 404, 424, 444, I544 (All w/ 5-1/2” diesels w/ Donaldson Pre-Cleaners dia.), Replaces: 363000R1 (All w/ 3” I.D. base & 7” bowl) NOTE: Check measurements before Replaces: 365415R91 ordering. Clear plastic. NOTE: Metal.Inc.® Check size before ABC484 specifications: Bowl O.D. at top = 5-1/2", Bowl O.D. at ordering. IH/Farmall bottom = 5", Cone I.D. at top = 2-7/16", Bowl side height = 2-7/16", JDS561 $79.99 IH/Farmall Case IH Overall height = 3-9/16" Pre-Screener w/out Screen fits: Same ABC383 $84.99 as JDS557 NOTE: Metal. Powder coat Pre-Cleaner Cap Assembly fits: M, MD, green. Check size before ordering. Super M, Super MD, MTA, 400, 450, 504 diesel, W400, W450 (All w/ 2-1/4” Chassis parts I.D. base & 7” bowl) ABC3163Parts, $39.95 Screen w/ Clip & 2 Springs Replaces: 365261R91, 379670R91 (For pre-screener) fits: Same as JDS561 & other IH models (All w/ 7” dia. pre- ABC512 $77.99 cleaner bowl), Replaces: 378724R1 Pre-Cleaner Cap Assembly fits: WR9S, (5-1/4” tall x 19-3/8”) Super WD9, WDR9, 460, 560, 600, 606, NOTE: Powder coat creme. 650, 660 & others (All w/ 2-1/2” I.D. JDS938 $5.99 base & 7” bowl), Replaces: 365262R91 Pre-Screener Clip & Springs Kit USA made (For ABC3163), Replaces: 353639R1, 353758R1 NOTE: Powder coat green. JDS741 $104.50 Pre-Cleaner Cap Assembly w/ Brass Nut fits: I-544, 2544Tractor diesels both SN: ABC510 $66.99 11573 & up, TD9 92 series & other IH / Pre-Cleaner Cap Assembly fits: IH/ Farmall models (All w/ 3” I.D. base & Farmall models, 1026, 1206, 1256, 1456 7” bowl), Replaces: 321190R91 (All w/ 4” I.D. base & 10-1/2” bowl) NOTE: Powder-coated green. Replaces: 321262R91
ABC470 $42.50 ABC339 $16.99 Pre-Cleaner Bowl (For 3” to 4” inlet) Pre-Cleaner Cap Assembly fits: I-544 For air intake on the following diesels: diesel, 2544 diesel both SN: 11573 & 1026, 1206, 1256, 1456, 21026, 21256, up, TD9 92 series & other IH / Farmall 21456, Replaces: 277377R1, Can replace models (All w/ 3” I.D. base & 7” bowl) Donaldson bowl P016330 NOTE: Clear SteinerReplaces: 321190R91 plastic. ABC339 specifications: Bowl O.D. at top = 10-1/2", Bowl side JDS559 $25.99 Pre-Cleaner Cover w/ Brass Nut height = 3", Cone I.D. at top = 5-9/16", Overall height = 4" fits: Some H, M, Supers, W6 - W9, 400, 450, 460, 504, 544 diesel, 560, 600, 606, ABC515 $52.75 650, 660, 2504, 2544 diesel, 2606; Gas Pre-Screener Screen w/ Clips fits: 1026, powered Combines: 403, 453 Hillside, 1206, 1256, 1456, Replaces: 384543R91, 503, 615, 715 (All w/ 7” dia. bowl) 539985R91 (10” tall x 28”) Replaces: 365413R1 NOTE: Powder coat green. NOTE: Powder coat green.
STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com 333 Donaldson pre-cleaner assemblies Fuel tank parts cont... Part # USD Description / Application Part # USD Description / Application IHS678 $89.95 Donaldson Pre-Cleaner Assembly ABC494 $3.95 Fuel Tank Webbing (3’ long) fits: Tractors w/ Glass Dust Jar, Gasket & Decal using webbed insulation between fuel fits: Cub, A, B, (Super A up to SN: tank mounts & other sheet metal parts 355669) (All w/ 1-3/8” I.D. base) (3’ L x 1” wide x .042” thick) USA made Replaces: 356254R91, 59206D, NOTE: Economy black woven nylon. Donaldson X-1596-A Sold in 3-foot length. Can be glued or NOTE: May need to lengthen air riveted. cleaner pipe for some applications. ABC1823 $4.95 Fuel Tank Webbing (3’ long) fits: Tractors IHS681 $89.95 Donaldson Pre-Cleaner Assembly using webbed insulation between fuel w/ Glass Dust Jar, Gasket & Decal tank mounts & other sheet metal parts fits: Super A SN: 356001 & up, Super (3’ L x 1” wide x .050” thick) A-I, C, Super C, 100, 130, 140, 200, 230, NOTE: Black canvas. Sold in 3-foot 240, 340 (All w/ 1-3/4” I.D. base) length. Can be glued or riveted. Replaces: 352612R91 ABC1656 $5.25 Fuel Tank Webbing (3’ long) fits: Tractors IHS679 $13.59 Dust Jar only (Ball brand) using webbed insulation between fuel (For IHS678, IHS681) tank mounts & other sheet metal parts IHS681GK $3.49 Gasket only (For IHS678, IHS681) (3’ L x 1-1/2” wide x .050” thick) NOTE: Green canvas.Inc.® Sold in 3-foot DEC447 $4.49 Decal only USA made length. Can be glued or riveted. IHS717 $89.95 Donaldson Pre-Cleaner Assembly ABC1827 $5.75 Fuel Tank Webbing (3’ long) fits: Tractors w/ Glass Dust Jar, Gasket & Decal using webbed insulation between fuel fits: H & Supers, I, O, W4 series, 300, tank mounts & other sheet metal parts 350 gas, diesel (All w/ 2” I.D. base) (3’ L x 2” wide x .050” thick) NOTE: Case IH Replaces: 59095D IH/Farmall Black canvas, mildew resistant. Sold in IHS719 $89.95 3-foot length. Can be glued or riveted. Donaldson Pre-Cleaner Assembly IHS536 $2.15 Fuel Tank Insulating Pad fits: H, M, w/ Glass Dust Jar, Gasket & Decal Parts, MTA, Supers, I, O, W4, 6, 9 series gas, fits: M, MTA & Supers, I, O, W6, 9 diesel, I9, Hydro 70, Hydro 86, 200, 230, series gas, diesel, 400, 450 (All w/ 240, 300, 330, 340, 350, 400, 404, 424,444, 2-1/4” I.D. base), Replaces: 59096D 450, 460, 504, 544, 560, 600, 606, 650, 656, IHS727 $15.85 Dust Jar only (Ball brand) (For IHS717, 660, 664, 666, 686, 706, 756, 766, 826, 856, IHS719) (3-1/4” O.D. thread, 3-7/8” tall) 966, Replaces: 51121D, 60671D IHS717GK $4.59 Gasket only (For IHS717, IHS719) (1-1/2” O.D.) NOTE: Sold individually.
Chassis parts (3.200” O.D.) ABC455 $3.29 Fuel Tank Mounting Pad fits: IH / DEC447 $4.49 Decal only USA made Farmall models (2” x 2”, 1/4” thick) Tractor NOTE: 2 used per tractor; Sold individually. Fuel tank parts MIS1123 $1.95 Fuel Tank Mount Slotted Hex Nut fits: H, Part # USD Description / Application HV, Super H, Super HV, M, MTA, MD; MIS129 $69.99 Fuel Tank Liner Kit USA made W, I, O 4, 6 series; WD9, Super W9 NOTE: Seals tanks up to 12 gallons. Replaces: 125357, 272071, 272312 Includes all of the products necessary to (7/16”-20 NF, Grade 5) NOTE: Zinc successfully clean, prep and line your plated. 3 used per tractor; tank. Once lined, pinhole leaks will be Sold individually. sealed & future rust will be prevented. SteinerFuel tank liner kit ships in own box. 1 kit per box. Can not be sold in the states of CA, HI, AK. For CA residents we Fuel caps, gaskets can special order a low V.O.C. acetone Part # USD Description / Application formula. JDS193 $18.95 MIS106 $32.50 Fuel Cap w/ Gasket fits: T20, W30 Fuel Tank Liner only (1 quart can) Replaces: 22785DA USA made NOTE: Must drill vent hole into cap. Underside view
334 STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm Fuel caps, gaskets cont... Fuel caps, gaskets cont... Part # USD Description / Application Part # USD Description / Application IHS226 $9.99 IHS1886 $10.79 Vented Fuel Cap w/ IHS239 Gasket & Fuel Neck Grommet fits: Cub LoBoy 154, Splash Guard (Says “Buy Clean Fuel - Cub LoBoy 185, 274, 284 Keep It Clean”) fits: F12, F14, F20, F30, Replaces: 106953C1 USA made Underside view 10-20, 15-30, W-30, Cub, A, B, C, H, M, MTA, Supers, 100, 130, 200, 230, 300, 350, IHS577 $9.95 Starting Tank Fuel Cap w/ Gasket ABC1880 $9.99 400, 450, 600, 650, All I, O, W series (Top (Says “Buy Clean Fuel - Keep It Clean) IHS226: Replaces: 23995DA, 65024D vented) fits: H, M, Supers, I, O, W-4, 6, 9 series, 240, (2.725” I.D., .625” height) 300, 350, 400, 450, 600, 650 (All w/ distillate or diesels gasoline starter tanks) ABC1880: Replaces: 23995DA, 12770D Underside view Replaces: 40756D (1-3/4” I.D., .350” height) Underside view (2-11/16” I.D., 1.118” height (cap only)) NOTE: One gallon starting tank fuel cap. IHS338 $9.95 IHS416 $29.50 Triple Baffle Fuel Cap (Says “Buy Clean Starting Tank Fuel Cap w/ Gasket Fuel - Keep It Clean) fits: Cub, A, B, C, H, fits: Same as IHS577, but does not have M, MTA, Supers, 100, 130, 140, 154, 184, correct appearance (1-3/4” I.D., 1-3/8” 185, 200, 230, 240, 300, 330, 340, 350, 400, tang to tang) NOTE: Has (2) tangs on top 404, 424, 444, 450, 460, 504, 544, 560, 600, Underside view mounted from center out. 606, 650, 656, 660, 664, 706, 756, 766, 806, ABC3352 $2.75 Gasket only (ForInc.® IHS577, IHS338) 826, 856, 966, 1026, 1066 1206, 1256, 1456, NOTE: NBR. IH/Farmall IH/Farmall 1466, 1468, 1566, 1568, Hydro 86, Hydro ABC2672 $129.99 Fuel Tank Filler Neck Straightening Tool Case IH 100, All I, O, W 4, 6, 9 series gas, diesel; w/ Instructions fits: A - 4786 Underside view Fits the following w/out cabs: 786, 886 Replaces: 05-572 USA made 986, 1086, 1486, 1586, Hydro 186 NOTE: Used to straighten bent filler Replaces: 23995DC, 65024D, 361910R1 necks & filler neck tabs to make the cap (2-7/8” O.D., 2-3/4” I.D., 2-1/2” height) seal properly (not for use with tanks IHS3414 $124.95 using baffled filler necks). This part is a Chassis parts Vented Fuel Gauge Cap w/ IHS239 Parts, duplicate of the factory IH service tool Gasket fits: H, HV, I4, Super H, Super HV, that works in many applications using O4, OS4, W4, Super W4 the IHS226, ABC1880, IHS416 caps. Replaces: 365498R92 (13” o/a length) Top view
IHS3409 $124.95 Vented Fuel Gauge Cap w/ IHS239 Sediment bowl assys., parts Gasket fits: I6, ID6, M, MD, MV, MDV, Part # USD Description / Application O6, OS6, ODS6, Super M, Super MD, IHS1577 $78.95 All-Fuel Sediment Bowl Assembly Super MV, Super MDV, Super MTA, (For tractors w/ two tanks) fits: Regular, Super MDTA, Super MVTA, Super Tractor 10-20, 15-30, 22-36, F12, F20, F30, W30, MDVTA, Super W6, Super WD6, Super W40; H to SN 50865; M to SN 24214; O4, W6TA, Super WD6TA, W6, WD6 Top view W4 both to SN: 1129; O6, W6 both to SN: Replaces: 365499R92 (14-3/4” o/a length) 1316, Replaces: 17237D, 17237DA IHS3404 $124.95 Vented Fuel Gauge Cap w/ IHS239 (1/4” pipe inlet, (2) 5/16” compression Gasket fits: 300, 350 Row-Crop & outlets) NOTE: Includes (2) IHS2622 fuel Utility; 400 up to SN: 38332, W400 up line fittings. to SN: 3595, Early 450, Early W450 gas, IHS713 $70.75 Sediment Bowl Assembly (All Fuel) diesel (All w/ 18 gal. tank), Replaces: (For tractors w/ two tanks) fits: A, B, C, Top view 365495R92 (17-1/4” o/a length) Supers; Will also fit H, HV both SN: 50866 IHS239 $2.45 & up; I4; O4, W4 both SN: 1130 & up; I6; SteinerGasket only (For IHS226, ABC1880, O6, W6 both SN: 1317 & up; M, MV both IHS416, IHS3414, IHS3409, IHS3404) SN: 24215 & up (All w/ purchase of 90 Replaces: 23977DD (2.563” O.D., degree elbow - not supplied by STP, Inc.); 1.875” I.D., .125” thick) NOTE: NBR. 100, 130, 140, 200, 230, Replaces: 17215DA, IHS2642 $2.50 Gasket only (For IHS226, ABC1880, 58361DAX, 51495DD, 370831R91 IHS416, IHS3414, IHS3409, IHS3404) (3/8” pipe inlet, (2) 5/16” compression Replaces: 23977DD (2.580” O.D., 1.900” outlets) NOTE: Includes (2) IHS2622 fuel I.D., .095” thick) USA made line fittings. NOTE: Rubberized cork. Sediment Bowl Assys. continue on next page
STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com 335 Sediment bowl assys., parts cont... Sediment bowl assys., parts cont... Part # USD Description / Application Part # USD Description / Application IHS3928 $34.95 NEW! Sediment Bowl Assembly fits: A, B, ACS326 $33.95 BN, C, Cub, Cub LoBoy, Super A, Super Sediment Bowl Assembly fits: 424, 444, C, 100, 130, 140, 154, 184, 185, 200, 230, 2424, 2444, Replaces: 614421R91 240, I300, 330, 340 & 350 gas, 404, 454, I460 (Side inlet & outlet, 1/8” x 1/8” female gas, 464, 504 & 544 gas, 574, I606 & I656 pipe thread) gas, 674, 2400A, 2404, 2500A Replaces: 354222R91, 355142R91, 38465D, 51066DC, 61782C91 (.375” pipe inlet, .250” NPT outlet, 1.280” long bowl) NOTE: Includes (1) IHS2622 fuel line fitting to fit .313” line. ABC123 ABC039 ABC229 ABC534 ABC563
IHS3881 $34.95 Sediment Bowl Assembly fits: H, M, MTA, ACS326 components Supers, I, O, W4, 6, 9 series gas, diesel, NOTE: The following parts (Sold separately) will fit ACS326 F300, F340, F350; Fits the following gas Sediment Bowl Assys: only: 400, 450, 460, 544, 560, 600, 656, 660, 706, 756, 766, 806, 826, 856, 2504, 2606, Part # USD Description 2656, 2706, 2756, 2826, 2856 ABC123 $2.99 Glass Bowl, Replaces: 357958R1 Replaces: 370832R91 (3/8” pipe inlet, (1.280” L, 2” O.D.)Inc.® 5/16” compression outlet, 2.315” long ABC039 $1.95 Cork Gasket, Replaces: 13193D bowl) NOTE: Includes (1) IHS2622 fuel (2” O.D) USA made line fitting. ABC229 $2.99 Brass Screen, Replaces: 13194D (2” O.D., 3/8” dia. center hole)
Case IH ABC534 $3.90 Plastic Screen, Replaces: 49923D
IH/Farmall (1-7/8” O.D., 0.425” center hole)
ABC124 JDS642 ABC229 ABC534 ABC236 ABC563 $4.95 Bail Assembly w/ Nut Parts,Replaces: 49947DX (2.700” length) IHS1577, IHS713, IHS3881, IHS3928 components USA made The following parts (Sold separately) will fit IHS1577, IHS713, IHS3928, IHS3881 Sediment Bowl Assemblies: Part # USD Description Fuel filters, parts ABC124 $4.99 Glass Bowl (For IHS1577, IHS713, Part # USD Description / Application IHS3881), Replaces: 357957R1 ABC490 $6.50
Chassis parts (2-1/8” O.D., 2.315” L) In Line Fuel Filter w/ Hose & Clamps JDS642 $1.95 Cork Gasket, Replaces: 360679R1 fits: IH / Farmall models using a 3/8” (2.150” O.D.) USA made fuel line NOTE: Must splice fuel line to ABC229 $2.99 Brass Screen, Replaces: 13194DTractor use. Will help to keep rust & dirt out of (2” O.D., 3/8” dia. center hole) carburetor. ABC534 $3.90 Plastic Screen, Replaces: 49923D ABC1315 $8.95 Fuel Tank Screen fits: Most IH/Farmall (1-7/8” O.D., 0.425” center hole) models w/ stem style sediment bowl. ABC236 $7.99 Bail Assembly w/ Brass Nut Will fit IHS713, IHS1577 sediment bowl Replaces: 17564D assemblies (.375” screen O.D., .216” pipe (2-1/8” O.D., 3.500” long) O.D., 2.530” o/a length) USA made NOTE: Slides on top of sediment bowl inlet to prevent dirt from the fuel tank From Steinera satisfied customer! bottom from entering the sediment bowl assembly. Direct fit for IHS713, IHS1577 & IHS3881. “Hello Krystle. Letting you know the parcel IHS1578 $34.95 delivered today around mid day - 3 days Bail (For Fuel Strainer/Water Trap) fits the following diesels: MD - Super ahead of schedule! Thank you so much - WD9, TD6 - TD14, 400, 450, 460, 560, 600, my friend is elated with the parts and the 606, 650, 660, Replaces: 54760D, 60878DX, efficiency of delivery.” - Ron H. 165373H1, 370785R91 (5” tall, 3-1/8” wide)
336 STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm Fuel filters, parts cont... Fuel filters, parts cont... Part # USD Description / Application Part # USD Description / Application IHS1574 $28.50 Bowl (For Fuel Strainer/Water Trap), ABC3895 $4.50 Fuel Filter Bowl fits: Some 454, 464, 484, OEM fits the following diesels: MD - 544, 584, 684, 784, (826, 2826 both w/ BR Super WD9, TD6 - TD14, 400, 450, 460, pump), 884, 2544, Industrials 560, 600, 606, 650, 660, Replaces: 54764D, Replaces: 3132197R1 (.710” I.D. center 60877D, 62164D, 370783R1 (2-7/8” O.D., hole, 1.600” tall, 3.660” O.D., 3.310” I.D. 4” long) USA made NOTE: Glass. where filter sits, rounded bottom) NOTE: Glass. Measure bottom hole ABC1221 $4.95 Gasket only (For Fuel Strainer/Water size before ordering as more than one Trap) fits the following diesels: MD - size was available. Gasket not included. Super WD9, TD6 - TD14, 400, 450, 460, See website for all applications. Fits 560, 600, 606, 650, 660 ABC1423 filter assy. Replaces: 54763D, 60876D, 370520R1 (2.242” I.D., 2.948” O.D.) USA made NOTE: Rubberized cork. ABC4646 $36.99 Steel fuel lines NEW! Dual Stage Fuel Filter Assembly NOTE: Fit fuel strainer to carburetor. fits: 433, 533, 574, 584, 585, 633, 644, 674, Part # USD Application 684, 685, 733, 784, 785, 833, 844, 884, 885, 946, 955, 1046, 1055, Replaces: 83929882 IHS3165 $28.99 Fits: Cub, Cub Inc.®LoBoy both w/ vertical exhaust using IH carburetor) IH/Farmall ABC1423 $29.95 Diesel Single Fuel Filter Assembly w/ Replaces: 350968R11 USA made IH/Farmall Case IH Glass Bowl Serviceable for B414, 354, 364; NOTE: Will not fit 154, 184, 185 or tractors Industrials: 2300A, 3414, 3444, 7000 w/ Zenith carburetors. Replaces: 3043645R91 ((4) 1/2” x 20 IHS3170 $31.95 Fits: Cub, Cub LoBoy both w/ underslung UNF ports) NOTE: If glass bowl is (horizontal) exhaust using IH carburetor needed order ABC3895. Use caution
Replaces: 362358R11, 369992R11 Chassis parts when threading fuel line in, as it is not (5/16” O.D.) NOTE: Will not fit 154, 184, returnable if threads have been cross Parts, 185 or tractors w/ Zenith carburetors. threaded. ABC1421 $5.95 Diesel Fuel Filter Element w/ Seals IHS3190 $32.99 Fits: Cub, Cub LoBoy both w/ vertical or (For Cav/Simms diesel fuel filters) underslung (horizontal) exhaust using fits: B414, 354, 364, 384, 385, 444, 454, Zenith carburetors, Replaces: 63499C91 484, 485, 574, 584, 585, 674, 684, H84, 685, (5/16” O.D.) NOTE: Will not fit 154, 184, 784, 785, 885, Replaces: 3044506R93, Cav 185 or tractors w/ IH carburetors. 7111/296 (3-1/2” O.D. x 3/4” I.D. x 2.85” tall) NOTE: Sold individually. IHS939 $29.99 Fits: A, AV, B, BN gas only IHS3879 $4.95 Fuel Filter Bowl fits: Early 385, 454, 464, Replaces: 51498DX, 58137DX 474, 484, 485, 574, 584,Tractor 585, 644, 664, 674, NOTE: Will not fit tractors w/ two fuel 684, 744, 784, 785, 844, Hydro 84 some w/ tanks. round bowl Cav filter Replaces: 3144478R1, 3144478R14 IHS937 $34.95 (.350” I.D. center hole, 3.660” O.D. gasket Fits: Super A, Super AV, C, Super C, 100, mounting flange, 3.625” O.D. bowl, 130, 140, 200, 230, F240 gas rounded bottom) NOTE: Glass. See Replaces: 350623R11, 356355R11 website for serial number breaks.
ABC3882 $4.50 Fuel Filter Bowl fits the following diesels IHS1487 $39.99 w/ original CAV filters: Case IH: 585, 885 Fits: H gas only, Replaces: 56451DX Steinerboth up to engine SN: 18001; IH 354, 384, (25” long) USA made NOTE: Will not fit (584, 585 engine SN: 318210 & up), 644, tractors w/ two fuel tanks. (784, 785 engine SN: 120521 & up), 844, 884, 885, Hydro 84; Industrial: 258, 2300A IHS941 $39.99 Fits: H SN: 50866 & up, Super H up to SN: Replaces: 3069610R1 (1” I.D. center hole, 19233, Replaces: 58367DAX USA made 2” tall, 3.300” O.D. bowl, 3.689” O.D. NOTE: Fits between gallon tank and gasket mounting flange, flat bottom w/ strainer on distillate tractors (tractors w/ squared edge) NOTE: Glass. Measure two tanks). before ordering as more than one size & style was used. Gasket not included. Steel fuel lines continue on next page
STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com 337 Steel fuel lines cont... Throttle parts cont... NOTE: Fit fuel strainer to carburetor. Part # USD Description / Application Part # USD Application IHS4191 $5.99 NEW! Governor Control Rod Front IHS943 $39.99 Equalizer Spring fits: A, B, C, Supers, 100, Fits: M, MV, Super M, MTA gas only; Also 130, 200, 230, Replaces: 51300D fits the following w/ All fuel: M, MV (both (0.830” o/a length, 0.435” O.D.) w/ SN: 24215 & up); Super W6 SN: 3951 & USA made up, Replaces: 60684DX, 56512DX, 58363DX IHS4195 $6.99 NEW! Governor Control Rod Rear IHS945 $42.99 Equalizer Spring fits: A, B, C, Supers, 100, Fits: IH 400 up to SN: 38332, W400 up to 130, 200, 230, Replaces: 53393D SN: 3595 both w/ 18 gallon fuel tank (1.975” o/a length, 0.365” O.D.) Replaces: 362558R11 USA made USA made
IHS948 $42.99 IHS490 $59.99 Fits: 400 SN: 38333 & up, W400 SN: 3596 & Saw Tooth Throttle / Governor Control up, 450, W450 (All w/ 21-1/2 gallon fuel Assembly fits: H, M, MTA, Supers gas, LP tank), Replaces: 365339R11 USA made Replaces: 51351DBX, 51348DAX
IHS2622 $2.99 Carburetor Fuel Line Fitting fits: 5/16” line; Cub - 856, Replaces: 29899D, IHS603 $19.95 Lever only (For IHS490) 58362DBX (1/4” NPT) USA made Inc.® IHS2994 $59.99 Square Tooth Throttle / Governor Control Assembly fits: H, M, MTA, Supers gas, LP, Replaces: 366727R91 Throttle parts NOTE: Powder coat red. IHS875 $4.99 Throttle / Governor Control Spring Part # USD Description / Application Case IH (For IHS490 & IHS2994 throttle IH/Farmall IHS587 $49.95 assemblies), Replaces: 51349D (1.322” o/a length, .085” wire dia., .925” Throttle / Governor Control Assembly Parts,O.D.) USA made fits: Cub, Cub LoBoy IHS634 $6.95 Replaces: 351005R1; 351006R1 (lever) Throttle Dog (Stop) w/out Nut fits: H, M, MTA, Supers gas (All w/ square tooth throttle assy. / governor control handle) Replaces: 361245R1 IHS537 $59.95 IHS634N $0.59 Nut only (For IHS634) Throttle / Governor Control Assembly IHS035 $29.95 Chassis parts fits: A, B, BN Throttle Lever (M & W style) w/ FDS073 Replaces: 48259DX; 48260DA (lever) Friction Disc & Spring fits: H, Super H, Tractor HV, M, Super M, MV, MTA IHS538 $14.95 Lever only (For IHS537) FDS073 $3.50 Friction Disc only (For IHS035) USA made IHS539 $59.95 IHS987 $4.95 Throttle Spring only (For IHS035) IHS2666 $59.95 Throttle / Governor Control Assembly Throttle Cable w/ Knob fits: 154, 185 fits: Super A, 100, 130, 140 Replaces: 404557R91 (cable w/ knob), Replaces: 350610R11; 350612R2 (lever) 530118R1 (knob) (37” cable length)
IHS2654 $59.95 IHS540 $17.99 Lever only (For IHS539) Throttle Cable w/ Knob fits: 184 Replaces: 126262C1 (cable), 530118R1 IHS588 $59.95 Steiner (knob) (37-1/4” cable length) Throttle / Governor Control Assembly NOTE: Has threaded outer sheath. fits: C, Super C, 200, 230 IHS892 $4.75 Throttle Friction Disc fits: 240, 274, 284, Replaces: 354742R11; 351327R2 (lever) 340, 404, 424, 444, 454, 460, 464, 484, 504, 544, 560, 574, 584, 606, 656, 660, 664, 674, 684, 784, 884, 2400A, 2424, 2444, 2500A, IHS541 $4.49 BACK IN STOCK! Throttle / Governor 2504, 2544, 2656, H84, 3444 Control Spring fits: Cub, Cub LoBoy, A, Replaces: 369463R1, 388632R1, 394716R1, B, C, Supers, 100, 130, 200, 230 399168R1 (.165” thick, 1.960” dia., .530” Replaces: 43650D USA made hole dia.) USA made
338 STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm Throttle parts cont... Clutch parts cont... Part # USD Description / Application Part # USD Description / Application IHS1118 $119.99 Throttle Handle w/ Plug fits: 656, 706, Clutch kits, parts cont... 806, 1206, 4100, 4156, 4166, 4186, ABC1437 $8.49 Clutch Alignment Tool fits: Cub, Cub Replaces: 382682R1, 391666R1, 192105 LoBoy, 154, 184, 185 (plug) (11-1/4” long x 1-3/8” wide x (15/16” spline O.D., 10 splines, .625” 1-7/8” thick, 1/2” shaft dia., 1/8” pin pilot) USA made slot, 1” plug dia.) USA made IHS006 $119.95 Clutch Shaft & Transmission Spline Shaft NOTE: Red w/ black handle & nickel w/ Bushing fits: Cub, Cub LoBoy plated button plug. (Not 154, 184 or 185) IHS1116 $59.99 Upper Throttle Shaft w/ Nut fits: 706, Replaces: 351534R21 (42-1/2” long) 756, 806, 826, 856, 1026, 1206, 1256,1456D IHS498 $31.95 Replaces: 382683R11, 404238R11 Clutch Release Yoke, Pair fits: Cub SN: (11” long x 1/2” dia., 5/16” dia. on lock 32229 & up, Cub LoBoy nut end, 3/8” dia. on pin end) Replaces: 353239R2 (LH), 353240R2 (RH) USA made NOTE: Bare steel. USA made NOTE: Sold as a LH / RH pair. IHS243 $7.89 Rubber Throttle Knob fits: (Some 454), 544, 656, 666, 674, 686, (some 756), 766, IHS1497 $13.95 Clutch Release Yoke Pivot Pin 826, 856, 966, 1026, 1066, 1256, 1456, 1466, fits: Cub, Cub LoBoy, Replaces: 350948R1 1468, 1566, 1568, 2400, 2500, 2544, 2656, (0.373” dia, 5.695”Inc.® length) USA made 2756, 2826, 2856, 4366; Hydros: 70, 86, 100 NOTE: Improved design using 4140 IH/Farmall Replaces: 397931R2 (7/16” dia. hole, steel. IH/Farmall Case IH 2” long, 13/16” to 1-5/16” O.D.) IHS4817 $294.95 NEW! Clutch Kit fits: 154 Cub LoBoy, IHS1763 $17.95 Throttle Speed Indicator Plate fits: 766, 185 Cub LoBoy, Replaces: 404639R94, 966, 1066, 1466, 1468, 1566, 1568, Hydro 4640R93, 531708R11, 404671R1, 404666R1, 100, Replaces: 539232R1 (plate), 145372 404642R1 (rivet) (7/8” wide x 3-3/4” long)
NOTE: Kit includes pressure plate, Chassis parts USA made NOTE: Stainless. Not used Parts,clutch disc, fly wheel plate, throw-out on tractors w/ tilt steering. bearing, bushing, (2) brake pucks. IHS1234 $79.95 Pressure Plate only (New, not rebuilt) fits: 154, 185, Replaces: 531708R11 Clutch parts NOTE: Ductile steel. IHS1197 clutch Part # USD Description / Application pilot bushing & IHS2408 clamping bolt Clutch kits, parts sold separately. IHS645 $175.80 Clutch Kit fits: Cub, Cub LoBoy IHS1197 $8.89 Clutch Pilot Bushing fits: 154, 185 (Not 154, 184, 185) Replaces: 404666R1 (.625” I.D., .875” NOTE: Kit includes (1) NEW woven O.D., .750” long) USA made clutch disc (RockfordTractor style, 6-1/2”, 10 NOTE: Bronze. Fits inside IHS1234 spline, 15/16” hub), (1) NEW clutch pilot pressure plate. bushing, (1) NEW pressure plate, (1) IHS2408 $7.99 Pressure Plate Bolt & Nut fits: 154 SN: NEW graphite style throwout bearing, 15072 & up, 185 (All); Will also fit 154 up (1) clutch lineup tool. Adjust throwout to SN: 15071 if using IHS1234 bearing clearance BEFORE starting Replaces: 531619R1 (Grade 8) engine. No returns if broken. ABC550 $89.99 Pressure Plate only (New, not rebuilt) IHS1864 $89.99 fits: Same as IHS645, Replaces: 351760R91 Pressure Plate only (New, not rebuilt) (6-1/2” dia.) fits: 154, 184, 185 Steiner Replaces: 404639R94, 64794C92 NOTE: Must recheck clutch adjustment (5-1/2” O.D., 3 spring) & clearance after installation. No returns if broken. Will not fit 154 & up. IHS1861 $52.75 MHS076 $31.50 Clutch Disc only fits: Same as IHS645 NEW Clutch Disc only fits: 154, 184, 185 (6-1/2” dia., 15/16”-10 spline) Replaces: 404640R93 (5-1/2” O.D., 10 splines, 0.937 spline dia) NOTE: Must recheck clutch adjustment & clearance after installation. Will not fit 154 & up. Clutch parts continue on next page
STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com 339 Clutch parts cont... Clutch parts cont... Part # USD Description / Application Part # USD Description / Application
Clutch kits, parts cont... Clutch kits, parts cont... IHS1194 $9.75 IHS3468 $29.95 Clutch Brake Buttons (Puck) fits: 154, 185 Clutch Release Sleeve Guide, Bushing Replaces: 404642R1 NOTE: 2 used per fits: A, B, BN, C, Super A, Super C, 100, tractor; Sold individually. 130, 140, 200, 230, 240, 404 Replaces: 43546D (1.470” O.D., 1.280” IHS2339 $199.99 Clutch Drive Shaft fits: 154 up to SN: I.D., 5.067” long) NOTE: This is the tube 18708 w/ creeper drive the throw out bearing carrier slides on. Replaces: 530422R2 (24-1/2” long) It presses into the clutch housing. IHS2351 $199.99 Clutch Drive Shaft fits: 154 up to SN: IHS2984 $295.00 Clutch Kit fits: H, HV both up to SN: 18708 w/out creeper drive 391357, I4, W4, Replaces: 52900D Replaces: 404670R4 (31” long) (pressure plate), 64772DA (clutch disc), IHS2342 $199.99 Clutch Drive Shaft fits: 154 SN: 18709 & 361292R91 (throw-out bearing), ST544 up, 185 (All w/ creeper drive) (pilot bearing) Replaces: 543679R1 (22-5/8” long) NOTE: Kit includes new pressure plate, IHS1653 $199.99 Clutch Drive Shaft fits: 154 SN: 18709 & new woven clutch disc, throw-out up, 185 (All w/out creeper drive) bearing & pilot bearing.Inc.® Replaces: 543603R1 (29” long) IHS1438 $65.50 Woven Clutch Disc only fits the following IHS2348 $199.99 Clutch Drive Shaft fits: 184 w/ creeper w/ Rockford clutch: H, HV both up to drive, Replaces: 126206C1 (23-1/2” long) SN: 391357, W4, I4, Replaces: 64772D, DA (10” O.D., 10 splines, 1-1/4” spline I.D.) IHS2345 $199.99 Clutch Drive Shaft fits: 184 w/out
Case IH creeper drive, Replaces: 117242C1 ABC2974 $179.95 IH/Farmall (29-5/8” long) IHS958 $299.95 9” Clutch Kit fits: A, B, C, Super A, Super New Pressure Plate only fits: H, HV both Parts,up to SN: 391357, I4, W4 C, 100, 130, 140, 200, 230, 240, 404 Replaces: 56631DB, 375695R92 (clutch); Replaces: 52900D (10” O.D., 6 springs) 18567D, 55212D, 361292R91 (throw out bearing); 375493R1, 353242R92, IHS3004 $284.99 384383R91, 375547R91 (pressure plate); Clutch Kit fits: (H, HV SN: 391358 & up), 43291D, 364527R91 (Pilot bushing, 9” Super H, Super HV, Super W4 dia., 3 lever, 6 spring pressure plate, 500” Replaces: 358041R91 (10-1/2” O.D., 10 splines, 1-1/4” spline I.D., 9 spring wide at tip of fingers) NOTE: If you are
Chassis parts pressure plate) pulling the engine for a clutch/engine repair, you will also need IHS4243 NOTE: Kit includes new pressure plate, gasket kit. Older models may require new woven clutch disc, throw-out Tractor bearing & pilot bearing. the purchase of a new style throw out bearing sleeve (IHS1155) if the tractor IHS2999 $84.50 is equipped w/ a graphite style (non- Woven Clutch Disc only fits: H SN: turning) throw out bearing. 391358 & up, Super H, Super W4 IHS2681 $69.99 Replaces: 358556R92 (10-1/2” O.D., 10 spline, 1-1/4” spline I.D.) Woven Clutch Disc only fits: Same as IHS958, Replaces: 56631DB, 375695R92 (9” O.D., 6 splines, 1-1/4” spline dia.) IHS3002 $139.99 Rebuilt Pressure Plate only fits: H SN: Steiner 391358 & up, Super H, Super W4 IHS3709 $17.49 Clutch Alignment Tool fits: Same as Replaces: 358555R92 USA made IHS958 (6 spline, 1.250” spline O.D., (10-1/2” O.D., 9 springs) 0.865” pilot O.D., 5.875” o/a length) ABC3113 $22.50 IHS3665 $51.99 Clutch Alignment Tool fits: H, HV, I4, Clutch Release Yoke fits: A, B, C, Supers, Super H, Super HV, O4, W4 100, 130, 140, 200, 230, 240, 404 (10 spline, 1-1/4” spline O.D., 0.970” pilot Replaces: 47716D (7-5/8” o/a length) O.D., 5-1/2” o/a length) USA made
340 STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm Clutch parts cont... Clutch parts cont... Part # USD Description / Application Part # USD Description / Application Clutch kits, parts cont... Clutch kits, parts cont... IHS1884 $238.95 Clutch Kit (For standard clutch NOT over IHS2496 $369.95 Clutch Kit fits: 706, 756, 766, 786, 806, 826, center clutch) fits the following w/ 11” 856, 886, 966, 3088 (Pressure plate: 12” Rockford clutch assy: I6, ID6, W6, WD6, dia., 17 splines, 1-3/4” hub; Clutch: 12” (M, MD, MV, MDV up to SN: 291049) dia., 11 spline, 6 pad, 1-3/16” hub) Replaces: 48974D, 52840D, 52848DA, NOTE: Includes new pressure plate, ST208B clutch disc, throw out bearing, pilot NOTE: Kit includes new pressure plate, bearing and alignment tool. See website new clutch disc, throw-out bearing & for replacement numbers. pilot bearing. IHS2499 $22.50 Clutch Alignment Tool fits: Super MTA, ABC1425 $84.50 400, 450, 560, 660, 706 - 1486, 3088, 3288, Woven Clutch Disc only fits the following 3688, 4100 - 4186 (Pilot: 0.787” diameter, w/ 11” Rockford clutch: F20, I6, ID6, M, small spline: 1-3/16” 11 spline, large MD, 06, OS6, ODS6, Regular SN: 39405 spline: 1-3/4” 17 spline) & up, T20, W6, WD6, Replaces: 14736D, Clutch Throw Out Bearings 23573D, 52848D, 52848DA (11” O.D., 10 splines, 1-1/2” spline I.D.) IHS015 $49.95 Clutch Throw Out Bearing fits: Cub, Cub LoBoy (Not 154,Inc.® 184, 185) ABC3151 $15.95 Clutch Alignment Tool fits the following Replaces: 350921R11 IH/Farmall w/ 11” Rockford clutch: F20, I6, ID6, M, NOTE: Original graphite style. Must IH/Farmall Case IH Super M, MD, 06, OS6, ODS6, Regular recheck clutch adjustment & clearance SN: 39405 & up, T20, W6, (Super W6 up after installation. to SN: 9084), WD6 IHS785 $71.99 (10 splines, 1-1/2” spline dia., Clutch Throw Out Bearing 10-3/4” long, 0.965” pilot O.D.) w/ Release Carrier fits: 154, 185 (Not 184)
Replaces: 404671R1 Chassis parts IHS2996 $289.99 Clutch Kit fits: 300, 330, 340, 350, 460, 504, (2.160” o/a length) 544, 606, Replaces: 360746R91 (pressure Parts, plate), 360488R92 (woven clutch disc), ABC1928 $47.99 Clutch Throw-Out Bearing fits the 405625R91 (throw-out bearing) following when equipped w/ replaceable (10-1/2” O.D., 1.687” pressure plate rotating throw out bearing: Some A, B, spline I.D., 1.125” clutch spline I.D., C, H, W4, Supers, 100, 130, 140, 200, 230, 16 pressure plate splines) 240, 404, 2404, Replaces: 361292R91 NOTE: Includes new pressure plate, (2.062” I.D., 3.285” O.D., 0.810” thick) new woven clutch disc, throw-out USA made NOTE: Fits IHS1155 carrier for A - 404 apps. Visit our website for bearing. Pilot bearing not included, see additional application information. ABC2992 or ABC3000. See website for industrial applications.TractorIHS1155 $66.95 Clutch Release Bearing Carrier (For Replaceable Throw Out Bearing) IHS2990 $74.75 Woven Clutch Disc only fits: 300, 330, fits: A, B, C & Supers, 100, 130, 140, 200, 340, 350, 460, 504, 544, 606 230, 240, 404, Replaces: 6116D Replaces: 360488R92 NOTE: Bearing not included. This is the (10-1/2” O.D., 10 spline, 1-1/8” spline part referenced in IHS958 description for I.D.) NOTE: See website for full clutch bearing. Use ABC1928 bearing. applications. ABC496 $19.95 Clutch Throw-Out Bearing fits: F12, F14 IHS2993 $178.95 Pressure Plate only (New, not Rebuilt) Replaces: 18567D, 55214D, 362028R91 fits: 300, 330, 340, 350, 460, 504, 544, 606 (2.078” I.D., 0.801” thick, 3.269” face dia.) SteinerReplaces: 360746R91 (10-1/2” O.D., 16 NOTE: Measure before ordering. splines, 1.687” spline I.D., 1.188” flywheel ABC1937 $19.95 Clutch Throw Out Bearing fits: I6, ID6, step) NOTE: See website for full M, MD, MDV, Super M, Super MD, Super applications. MV, Super MDV, W6, WD6, Super W6, ABC3109 $22.95 Clutch Alignment Tool fits: 300, 330, 340, Super WD6, Replaces: 48974D 350, 460, 504, 544, 606, 656, 664, 666, 686 (2.250” I.D., 3.650” O.D., 0.800” wide) (Small spline: 1-1/8” spline O.D., 10 NOTE: For standard clutch NOT over splines, 0.787” pilot, 9-3/8” o/a length; center clutch. Visit our website for Large Spline: 1-11/16” spline O.D., 16 additional application information. spline) Clutch parts continue on next page
STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com 341 Clutch parts cont... Clutch parts cont... Part # USD Description / Application Part # USD Description / Application
Clutch Throw Out Bearings cont... Clutch Springs ABC2988 $31.50 Clutch Throw Out Bearing fits: 300, 330, IHS880 $5.99 Clutch Spring fits: Cub, Cub LoBoy 340, 350, 385, (424, 444 single clutch), 454, Replaces: 350951R1 460, 464, 484, 485, 504, 544, 574, 584, 585, USA made 606, 656, 664, 666, 674, 684, 685, 686, 784, (4-1/2” o/a length) 785, 884, 885; Also fits Industrials IHS701 $14.99 Replaces: 59879D, 365865R91, 405625R91 Clutch Spring fits: A, AV, B, BN, Super A, (2.375” I.D., 3.500” O.D., 0.730” wide) Super AV, 100, 130, 140 NOTE: See website for full applications. Replaces: 47845DA (7” o/a length) USA made ABC2501 $22.95 Clutch Throw-Out Bearing fits: Super MTA, W9, WD9, 400, 450, 560, 600, 650, IHS804 $13.49 660, 706 - 1586, 3088 - 3788, 4100 - 4186, Clutch Spring fits: C, Super C, 200, 230 6388 - 6788, Replaces: 69789C91 Replaces: 351210R1 (2.490” I.D., 4.060” O.D., 0.870” wide) (5-3/4” o/a length) NOTE: Sealed bearing, no need to IHS882 $14.95 grease. Clutch Spring fits: H, M, Super H, Super Clutch Pilot Bushings, Bearing M up to SN: 60000, 04 - ODS6, W4 - WD6 IHS730 $7.95 Replaces: 49444DAInc.® (6” o/a length) Clutch Pilot Bushing fits: Cub, Cub LoBoy, 154, 185, Replaces: 251266R1 IHS873 $9.95 (0.625” I.D, 0.815” O.D., 1.000” length) Clutch Spring fits: Super M series SN: USA made NOTE: Fits in crankshaft 60001 & up, Super O6, Super W6 series, flange. F300, F350, 400, 450, F460, 560, 660 Replaces: 357164R1 IHS1197 $8.89
Case IH Clutch Pilot Bushing fits: 154, 185 (3.850” o/a length) USA made IH/Farmall Replaces: 404666R1 NOTE: 4 used per tractor; (2) brake (.625” I.D., .875” O.D., .750” long) pedal, (1) clutch pedal, (1) TA handle; USA made NOTE: Bronze. Fits inside Parts,Sold individually. IHS1234 pressure plate. IHS687 $8.20 IHS3264 $8.99 Clutch Pilot Bushing fits: A, B, C, Super Clutch Pedal Return Spring fits: 544, 2544 A, Super C, 100, 130, 140, 200, 230, 240, Replaces: 48599DA 404, Replaces: 43291D, 364527R2 (8-1/8” o/a length) USA made (0.875” I.D., 1.125” O.D., 0.995” long) USA made IHS3664 $10.95 Clutch Pedal Return Spring fits: 454, ABC2937 $8.15 Clutch Pilot Bearing fits: F12, F14, F20, 464, 484, 574, 584, 674, 684, 784, (884 w/ Chassis parts F30, H, I, O, Regular, W4, W6, WD6 out self adjusting clutch), 2400A, 2500A, series, Supers, M, MD, Supers, MTA, 400, Hydro 84, Replaces: 399743R1 450, 560, 660, Replaces: ST208B, ST544, (4.184” o/a length, 0.814” O.D., 10701DA (0.984” I.D., 2.047”Tractor O.D., 0.590” 0.122” wire dia.) USA made wide) NOTE: Sealed bearing. IHS1581 $13.49 Clutch Pedal Return Spring fits the ABC2992 $10.99 Clutch Pilot Bearing fits: 300, 350, 460, following gear drive tractors: 706, 756, 544, 606, 656, 666, 686, 706, 756, 766, 806, 766, 806, 826, 856, 966, 1066, 1206, 1256, 826, 856, 886, 966, 986, 1066, 1086, 1206, 1456, 1466, 1468, 1566, 1568, 4100, 4156, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 4166, Replaces: 626206R1 1586, 3088, 3288, 3388, 3588, 3688, 3788, (4.463” o/a length, .083” wire dia, .744” 4100, 4156, 4166, 4186, 6388, 6588, 6788 spring O.D.) USA made Replaces: ST575, 524598R91 Clutch Covers (0.787” I.D., 2.047” O.D., 0.590” wide) SteinerNOTE: Sealed bearing. IHS1541 $15.99 Clutch Housing Inspection Cover ABC3000 $8.99 Clutch Pilot Bearing fits: B275, B414, fits: Cub, Cub LoBoy 330, 340, 354, 364, 384, 385, 424, 434, 444, Replaces: 351485R2 USA made 454, 464, 484, 485, 504, 574, 584, 585, 674, 684, 685, 784, 785, 884, 885, 2300A, IHS627 $12.50 2400A/B, 2500A/B, 3400A, 3414, 3444, Clutch Dust Cover fits: Cub SN: 35351 & 3500A, 3514, 3616, 4000, 7000, Replaces: up, A, B, C & Supers, 100, 130, 140, 200, ST553, 537290R91, 538961R91 (0.787” I.D., 230, 240, 404, 2404, Replaces: 57579DX 1.850” O.D., 0.551” wide) NOTE: Sealed (2.025” O.D.) NOTE: Mounts to side of bearing. housing.
342 STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm Clutch parts cont... Transmission parts Part # USD Description / Application Part # USD Description / Application Clutch Covers cont... Transmission Gears IHS493 $17.99 Round Clutch Inspection Plate w/ IHS013 $29.99 1st & Reverse Sliding Gear fits: Cub, Cub Bracket & Screw fits: Cub, some A, B, LoBoy 154, 184, 185, Cub Cadets Super A, Super C, 100, 130, 140, 200, 230, Replaces: 350867R1 NOTE: 13 teeth. 240, 404, 2404, Replaces: 351486R1 See website for Cub Cadet applications. (4-3/16” O.D.) NOTE: Mounts under housing.Check shape prior to ordering. IHS011 $49.99 2nd & 3rd Sliding Gear fits: Cub up to SN: IHS494 $17.99 Oval Clutch Inspection Plate w/ Bracket 192112, Some Cub Cadets & Screw fits: Some A, AV, B, BN, Super A, Replaces: 350868R1 Super AI, C, Super C, Replaces: 57576DX NOTE: 17 & 26 teeth. See website for (3” x 4” O.D.) NOTE: Mounts under Cub Cadet applications. housing. Check shape prior to ordering. IHS012 $79.95 Newer 2nd & 3rd Sliding Gear fits: Cub Miscellaneous Clutch parts SN: 192113 & up, Cub LoBoy 154, 184, IHS2316 $3.50 Clutch Joint Rubber Washer fits: Regular, 185, Some Cub Cadets F12, F14, F20, H, M, I4, I6, O4, O6, W4, Replaces: 364520R1 NOTE: 16 & 26 teeth. W6, Supers, Replaces: 6161H See website for Cub Cadet applications. (1.125” O.D., 0.275” thick, 0.563” I.D.) IHS4264 $12.99 Inc.® NOTE: 8 used per tractor; Front Upper Transmission Main Shaft Sold individually. Bearing fits: Farmall Cub, Cub LoBoy; IH/Farmall International Cub 154, 184, 185 IH/Farmall IHS4372 $2.99 Case IH NEW! Clutch Joint Rubber Washer Replaces: 5T542, 544285R91 Retainer Ring fits: Same as IHS2316 IHS2321 $59.99 Replaces: 7579T NOTE: 8 used per Creeper Direct Drive Spline Gear fits: 154, tractor; Sold individually. 184, 185 all w/ creeper (reduction drive) IHS4664 $16.99 & updated to 1/8” keyway
NEW! Clutch Joint Bolt w/ Lock Washer Chassis parts Replaces: 55370C3 & Nut fits: Regular, F12, F14, F20, H, HV, Parts, O4, W4, Supers, Replaces: 15393DAX IHS2323 $79.99 (bolt), 103322 (washer), 103027 (nut) Creeper Planet Gears (3) fits: 154, 184, 185 USA made all w/ creeper (reduction drive) Replaces: 530435R2 IHS4399 $14.99 NEW! Clutch Joint Bolt w/ Lock Washer & Nut fits: M, Super M & MTA, O6, W6, IHS2317 $129.99 Replaces: 48968DAX Creeper Drive Plate (Carrier) fits: 154, 184, USA made 185 all w/ creeper (reduction drive) IHS323 $42.50 Clutch Easy Pedal Adapter fits: H, M, Replaces: 532462R2, 6632665 Supers, MTA, 300, 350, 400, 450, W9, WD9, Supers NOTE:Tractor Installs between IHS2319 $102.50 Creeper Gear Shaft Spline Drive Gear w/ clutch rod & release shaft. Bushing fits: 154, 184, 185 (All w/ creeper IHS1364 $13.75 Clutch Pedal Pivot Pin fits the following (reduction drive)), Replaces: 532461R1 Gear Drive, Hydros: 706 - 1206, 756 - IHS3178 $94.50 1456, Early 766 - Early 1468, Hydro 100 4th & 5th Speed Sliding Gear fits: H, HV Replaces: 384047R1 (.625” & .248” O.D., Replaces: 56420DA 1.820” o/a length) USA made NOTE: 18 & 35 teeth. IHS3619 $13.95 Front Clutch Rod Clevis Pin fits: 706, 756, IHS3185 $124.95 766, 806, 826, 856, 966, 1066, 1206, 1256, Constant Mesh Gear fits: H, HV, O4, OS4, Steiner1456, 1466, 1468, 1566, 1568, 4100, 4156, Super H, Super HV, W4, Super W4 4166, 4186 (All gear drive only) Replaces: 48418D, 48418DA, 357459R2 Replaces: 382492R1, R2 (0.625” O.D. 1.400” NOTE: 55 teeth. length) USA made NOTE: Zinc plated. IHS187 $219.99 IHS969 $9.95 Clutch Booster Cylinder Boot fits: 756, 766, 826, 856, 966, 1066, 1256, 1456, 1466, 4th & 5th Speed Sliding Gear fits: Super 1468, 1566, 1568, Replaces: 57119C1 H, HV, Super W4, Replaces: 358023R1, (5/8” top center hole, 1-1/4” bottom 358218R1 NOTE: 18 & 31 teeth. opening) NOTE: 2 used per tractor; Sold individually. Transmission parts continue on next page
STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com 343 Transmission parts cont... Transmission parts cont... Part # USD Description / Application Part # USD Description / Application Transmission Gears cont... Transmission Seals, Gaskets cont... IHS3181 $137.99 IHS2346 $12.95 3-pc. Transmission Gasket Kit fits: Cub, 4th & 5th Speed Sliding Gear fits: M, MD, Cub LoBoy; Also 154, 184, 185 (All w/ MV, MDV, Replaces: 56535DA out creeper gear), Replaces: 350846R1, NOTE: 20 & 34 teeth. 350866R1, 351546R1 USA made NOTE: Kit includes (1) transmission IHS3337 $199.99 4th & 5th Speed Sliding Gear fits: Super shift cover gasket, (1) upper spline shaft M, (Super W6 up to SN: 9084) oil seal gasket, (1) counter shaft bearing Replaces: 356491R1 NOTE: 20 & 30 teeth. retainer gasket. Does not fit Super MTA. IHS2354 $19.99 3-pc. Transmission Gasket Kit fits: A, IHS048 $199.99 1st & Reverse Slider Gear fits: 544, 664, Super A, B, BN, 100, 130, 140 2544, 656, 2656, 666, 686 Replaces: 46503D, 47279DA, 47283DB Replaces: 388165R1 USA made NOTE: 14 splines, 57 teeth. ABC1503 $8.50 IHS070 $186.50 Reverse Driven Gear fits: 706, 756, 766, Top Transmission Shaft Seal fits: A, B, C, 786, 806, 826, 856, 886, 966,986, 1066, 1086, Supers, 100, 130 140, 200, 230, 240, 404 1206, 1256, 1456, 1466, 1468,1486 Replaces: 21969D, Inc.®381907R91, 42177D Replaces: 380288R1, 138764C1 (1.625” I.D., 2.441” O.D., .312” wide) NOTE: 35 teeth. Improved design - heavier & wider like old-style gear. ABC2008 $13.65 Transmission Shafts Transmission Counter Shaft Seal fits: H, Super H, Replaces: 356502R91, 356503R91 IHS2325 $149.99 Creeper Sun Gear Drive Shaft fits: 154, Case IH (1.375” I.D., 2.110” O.D., 0.315” wide)
IH/Farmall 184, 185 all w/ creeper (reduction drive) & updated to 1/8” keyway ABC3362 $7.79 Replaces: 55369C2 Belt Pulley Shaft Seal fits: M, MD both Parts,SN: 19203 & up, Supers, MTA, (Super W6, IHS1970 $89.99 Transmission Drive Shaft Coupler Hub WD6), 400, 450, W400, W450, 560, 660 fits: 154 SN: 15072 & up, 185; Will also Replaces: 378673C91 (2.125” I.D., 2.879” fit earlier serial number by purchasing O.D., 0.438” wide) 531618R1 bolt, 9413994 nut & 120214 washer not supplied by STP, Inc. IHS3084 $10.79 Transmission Drive Shaft Oil Seal fits: H, Replaces: 531709R1, 404683R1, 404669R91 Super H, I4, O4, W4, Super W4 IHS3183 $174.50 Replaces: 70258D, 79634H, 357967R91
Chassis parts Transmission Driving Shaft fits: H, HV (1.875” I.D., 2.875” O.D., 0.313” wide) both up to SN: 391357; O4, OS4, W4 Replaces: 52945DE NOTE: 18 & 35 teeth. ABC3198 $19.95 Transmission Drive Shaft Oil Seal fits: I, Tractor O, W6 series, M, MD, (Super M, MD both IHS3187 $144.95 up to SN: F52627 & L512541), Super W6, Transmission Driving Shaft fits: M, MV WD6 both up to SN: 9084 both up to SN: 279322; MD, MDV both up Replaces: 43359D, 71871C1 to SN: 283320; O6, OS6, ODS6, W6, WD6 (2.063” I.D x 3.194” O.D. x 0.375” wide) Replaces: 52089DD NOTE: 20 & 39 teeth. IHS3637 $9.99 Range Transmission Cover Gasket IHS042 $265.00 Transmission Drive & Secondary Sun fits: 706, 756, 766, 786, 806, 826, 856, 886, Gear Shaft w/ Belt Pulley Drive Gear 966, 986, 1026, 1066, 1086, 1206, 1256, fits: Super MTA, 400, 450, 560 1456, 1466, 1468, 1566, 1568, 1586, 3088, Replaces: 361288R4 NOTE: 20, 28 & 39 3288, 3488, 3588, 3688, 3788, 4100, 4156, Steinerteeth. Close out 4166, 4186, 6388, 6588, 6788, Hydros 100, Transmission Seals, Gaskets 186, Replaces: 380315R1, 380315R2 (14-3/8” long, 8” wide) IHS3439 $23.99 Transmission Spline Shaft Oil Seal w/ IHS3643 $9.99 Retainer & Gasket fits: Cub, Cub LoBoy, 154, 184, 185 (All w/out creeper drive) Speed Transmission (Clutch Housing) Replaces: 350865R91, 528810R91 (retainer Cover Gasket fits: Same as IHS3637 seals), 350866R1 (retainer gasket) Replaces: 380112R1, 380112R2 NOTE: IH changed the seal dimension (12-9/16” long, 11” wide) from original leather style. This kit will replace both seals.
344 STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm Transmission parts cont... Transmission parts cont... Part # USD Description / Application Part # USD Description / Application Miscellaneous Transmission Parts Miscellaneous Transmission Parts cont... IHS1888 $7.15 Torque Amplifier Handle Spring IHS3635 $5.95 Cam (Detent) Roller fits: 454, 464, (484 fits: F300, 330, 340, F350, 400, W400, 450, - 884 w/ ‘Z’ shift pattern), 574, 674, 706 - W450, 460, 504, 560, 606, 660, 2504, 2606, 1586, 3088 - 6788, 4100 - 4186 Supers MTA, W6TA Replaces: 380115R1, 380115R2 Replaces: 359920R1, R2 USA made (0.623” O.D., 0.495” I.D., 0.431” tall) IHS3902 $6.99 Torque Amplifier Operating Handle Pawl NOTE: See website for all applications Grip Pin fits: MTA, Super MTA, Super & the quantity used per model. MTA diesel, Super W6TA, Super WD6TA, IHS896 $49.99 300, 330, 340, 350, 400, 450, W400, W450, Park Lock Assembly fits: 706 - 1568 460, 504, 560, 606, 660, 2504, 2606 Replaces: 382847R1, 384261R1, 384263R1, Replaces: 359922R1, 359922R2 (.243” O.D., 390856R1, 390857R1, 390858R1, 64578C91 .375” O.D. head, .853” o/a length) USA made USA made NOTE: Restoration quality. 1 to 2 used per tractor; Sold Individually. IHS1854 $10.50 IHS3071 $6.99 Torque Amplifier Operating Handle Stop Park Lock Lever Actuating Spring Pin fits: MTA, F300, F350, 400, 450, F460, fits: 706 - 1568, Replaces: 208354R1 560, 660, Replaces: 141283 (.092” wire dia.,Inc.® 5.245” o/a length) (1/2” O.D. x 1” long) USA made USA made IH/Farmall NOTE: 1 pin used per model. IH/Farmall
IHS838 $19.95 Case IH IHS3075 $17.99 Torque Amplifier Operating Handle Pivot Transmission Shift Pattern Plate fits: 340, Bolt fits: MTA, F300, F350, 400, 450, F460, 460, 504, 560, 606, 660, 2504, 2606 (All w/ 560, 660, Replaces: 359919R2 Torque Amplifier), Replaces: 371371R1 (Stock 3/4” shoulder size) USA made (1-5/8” L x 1-1/16” H) USA made IHS3078 $17.99 Torque Amplifier Operating Handle Pivot Chassis parts Bolt fits: MTA, F300, F350, 400, 450, F460, IHS761Parts, $38.95 560, 660, Replaces: 359919R20 USA made NOTE: Bolt has 7/8” oversize shoulder NEW & IMPROVED! Shift Lever diameter. Must drill handle for oversize Quadrant Top Cover fits: 756, 766, 826, bolt and is for a worn handle hole. 856, 966, 1066, 1256, 1456, 1466, 1468 (Gear IHS3081 $13.99 Torque Amplifier Clutch Control Rod Drive tractors only), Replaces: 398005R2 Pin fits: Super MTA, F300, F350, 400, 450, F460, 560, 660, Replaces: 359918R1 (2.125” o/a length, 0.497” O.D. end, IHS769 $74.95 0.558” O.D. shoulder) USA made NEW & IMPROVED! Shift Lever IHS1282 $4.50 Torque Amplifier Handle Button Plug Quadrant Outer Cover fits: 756, 766, 826, fits: 544, 656, 664, 666,Tractor 686, 706, 756, 766, 856, 966, 1066, 1256, 1456, 1466, 1468 806, 826, 856, 966, 1066, 1206, 1256, 1456, (Gear Drive tractors only) 1466, 1468, 1566, 1568 (All using a 1-3/16” Replaces: 398006R1 plug), Replaces: 432344 (1.225 tang dia.) USA made IHS856 $33.95 IHS039 $19.99 Range Cover Shift Cam Detent w/ Rivets Belt Pulley Block Off Plate fits: H, Super fits: 706, 806, 1206, 4100, 4156, 4166 H, I, O, W4 series, F300, F350, F460 Replaces: 380306R51 NOTE: Rivet to Replaces: 49618DA, Will work for existing cam shifter. 365129R1 USA made
IHS3631 $37.35 Shifter Control Arm Repair Kit fits: 454, IHS858 $33.95 Steiner464, (484, 584, 684, 784, 884 w/ ‘Z’ pattern Belt Pulley Block Off Plate fits: M, Supers, shift), 574, 674, 826, 856, 886, 966, 986, MTA, I, O, W6 series, 400, 450, 560, 1066, 1086, 1256, 1456, 1466, 1468, 1486, 660, Replaces: 49053DB, Will work for 1566, 1568, 1586, 2400A, 2400B, 2500A, 365128R1 USA made 2500B, 3088, 3288, 3388, 3588, 3688, 3788, 6388, 6588, 6788 (All w/ gear drive IHS2077 $29.95 Torque Ampifier Control Cable fits: 786, transmission); Also fits 706, 806, 1206 as a 886, 986, 1086, 1486, 1586, 3388, 3588, 3788 speed & range transmission control kit Replaces: 120003C1, C2 (29-1/4” o/a Replaces: 380115R2, 382565R21, 383997R1 length, 1/4” - 28 NF threaded end) NOTE: See website for all applications.
STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com 345 Gear shift parts Gear shift parts cont... Part # USD Description / Application Part # USD Description / Application IHS824 $69.99 IHS2505 $4.95 Transmission Shift Detent Spring (For Hi-Lo & Reverse shifter) fits: 756, 766, 826, 856, 966, 1066, 1256, 1456, 1466, 1468, Gear Shift Lever fits: Cub (NOT w/ Deluxe 1566, 1568 (All gear drive tractors) Seat), Replaces: 356530R91 USA made Replaces: 397991R1 (0.085” wire dia., 1.125” o/a length) USA made NOTE: 2 used per tractor; Sold individually. IHS1200 $15.95 Gear Shift Pattern Insert (For IHS242) IHS2658 $82.50 (5 Speed Plus Reverse) fits the following gear drive tractors: 544, 656, 664, 666, 686 First & Reverse Shift Fork fits: Cub, Cub Replaces: 2752898R1 LoBoy, 154, 184, 185, Replaces: 355600R93 (1.600” dia) USA made IHS1204 $15.79 High/Low Insert (For IHS242) IHS266 $6.50 Gear Shift Knob fits: Cub, Cub LoBoy, A, Fits the following Hydros: 70, 86, 100, 544, B, C, H, M, MTA & Supers,I, O, T, W-4, 6, 656, 666, 686, 826, 966, 1026, 1066 9 series, 100, 130, 140, 200, 230, 240, 300, Replaces: 2753957R1 330, 340, 350, 354, 400, 404, 424, 434, 444, (1.600” dia) USA madeInc.® 450, 454, 460, 484, 504, 560, 574, 584, 600, IHS1208 $15.99 Forward/Reverse Insert (For IHS242) 606, 650, 660, 684, 685, 784, 884, B-250, Fits the following Hydros: 70, 86, 100, 544, B-275 B-250, B-275, B-414, 3414, 3616, 3514; 656, 666, 686, 826, 966, 1026, 1066 Crawlers: T4 thru some TD18A (also used Replaces: 2753956R1 as a reverser knob); Cub Cadet mowers: 70 (1.600” dia) USA made - early 582, Replaces: 53717DA, 3121549R1 Case IH IHS1799 $15.95 Torque Amplifier Knob Insert (For IHS242) IH/Farmall IHS981 $26.99 Shift Lever Repair Pin Kit fits: H - Super fits the following w/ T.A.: 544, 656, 664, WD9; 300 - 660 (Row-Crop & Utility), Parts,666, 686, Replaces: 2752916R1 B250 - 384, Replaces: 40465DA, 40466DA, (1.600” dia.) USA made 357003R1; 256918R1 (large pin); 256919R1 IHS1908 $15.95 Shift Pattern Insert (For IHS242 Knob) (small pin); (2 ea) 172529 (expansion plugs) fits: 154, 184, 185; Cub Cadet: 72, 73, 86, NOTE: See website for all applications. 104, 106, 108, 124, 126, 128, 582, 800, 1000, 1200, Replaces: 401466A1 IHS3314 $42.50 Premium Shift Lever Repair Pin Kit (1-5/8” O.D.) USA made fits: H - Super WD9; 300 - 660 (Row-Crop IHS243 $7.89 Chassis parts & Utility), Replaces: 40465DA, 40466DA, Rubber Gear Shift Knob Forward / 357003R1, 256918R1 USA made Reverse fits: IH Hydro models NOTE: Use this kit in place of IHS981 Replaces: 397931R2 (7/16” dia. hole, when shift tower pin holeTractor is worn or 2” long, 13/16” to 1-5/16” O.D.) elongated. IHS794 $15.95 Rubber Gear Shift T.A. Knob fits: IH 756, ABC3326 $9.79 766, 826, 856, (886 up to SN:16999), 966, Hi-Lo Range Shifter Shaft Seal fits: B275, (986 up to SN: 23999), 1066, (1086 up to B276, B414, 354, 364, 384, 424, 434, 444, SN: 47999), 1256, 1456, 1466, 1468, (1486 up 2300A, Replaces: 353183R91, 385038R91 to SN: 25999), 1566, 1568, (1586 up to SN: (0.625” I.D., 1.128” O.D., 0.250” wide) 20999) 3388 up to SN: 10384, (3588 up to NOTE: See website for all applications. SN:12729), 4386 SN: 2501 & up, 4568, 4586 Replaces: 397978R2 NOTE: Also used as IHS242 $12.95 Gear Shift Knob Hi-Low & Forward / torque amplifier knob. SteinerReverse for Hydros: 70, 86, 100, 544, 656, 664, 666, 686, 826, 966, 1026, 1066, 3488; IHS834 $36.99 Rubber Gear Shift Boot fits: I9, ID9, W9, T.A. & Gear shift for Gear Drive: 544, 656, WD9, WR9, WDR9, WR9S, Supers, 600, 650 664, 666, 686; Trans gear shift lever for: Replaces: 61064D IH 154, 184, 185; Gear shift for Lawn & Garden: Cub Cadet 72, 73, 86, 104, 106, 108, 124, 126, 128, 582, 800, 1000, 1200 IHS832 $8.95 Rubber Gear Shift Boot fits: 544, 656, 664, Replaces: 388180R2, 401467R1, 537110R1 666, 686, 2544, 2656 (All w/ gear drive NOTE: The hole may need to be drilled transmission), Replaces: 388182R1 to fit some applications.
346 STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm Gear shift parts cont... Steering wheels, parts cont... Part # USD Description / Application Part # USD Description / Application IHS2480 $19.49 IHS450 $51.50 Rubber Gear Shift Boot fits: B250 - B450, H, (Power) M, Supers, I, O, T, W4, W6, Supers, 300 - 660, Replaces: 64603DA (4-3/4” tall) NOTE: See website for full applications. Steering Wheel Cap (For IHS419) IHS450 Replaces: 366566R1 IHS451 Replaces: 366558R1 IHS451 $51.50 NOTE: Caps will also fit IHS542 (Manual) Steering wheels, parts steering wheel, but only original to steering wheel until ‘56’ series. Just like original • All new material • Steel spokes
Part # USD Description / Application IHS683 $51.50 Steering Wheel fits: Late F12, F14 (1938-39); Early A, B (up to mid 1940); IHS781 $12.50 Serviceable for Late F20, F30, Early H, M (up to mid 1940) if 16” dia. wheel is Serviceable Steering Wheel Cap desired, Replaces: 29118DC, 39636DB, (For IHS419) (Made by French & Hecht 848-IH) (16” dia., 3/4” shaft, keyed Inc.® 3 COVERED TO CENTER spokes) DEC522 $8.25 IH/Farmall IHS299 $51.50 IH/Farmall Decal (For IHS781) (1-3/4” O.D.) Case IH Steering Wheel fits: Cub, A, (Early USA made Super A up to SN: 355669), AV, Super AV, B, BN, C, Replaces: 60069D (15” dia., keyed hub, 3/4” shaft, ABC4697 $2.89 NEW! O-Ring only (For Steering Wheel 3 spokes) Cap) fits: IHS450, IHS451, IHS781, Chassis parts Replaces: A24160 (2.800” I.D., 0.103” IHS328 $49.50 Steering Wheel fits: Late Super A SN: Parts, thick, 90 Duro) USA made 356001 & up, C, Super C, H, M, Supers, NOTE: O-ring is included w/ our I, O, W4, 6, 9 series (w/ 17-5/8” 3 bare steering wheel caps. spoke wheel); 100, 130, 200, 230, F300, 400, Replaces: 60070D IHS850 $125.99 Steering Wheel fits the following w/ (17-5/8” dia., keyed hub, 3/4” shaft, tilt steering: 706, 756, 766, 806, 826, 856, 3 spokes) 966, 1026, 1066, 1256, 1456, 1466, 1468, 1566, 1568, Hydro 100 IHS173 $61.99 Replaces: 400217R1 Steering Wheel fits: 300 Utility (16” dia., 36 splines, 7/8” shaft) Replaces: 363227R91 ABC504 $5.95 Steering Wheel Nut (For IHS850) (17-5/8” dia., splinedTractor hub, 36 splines, 7/8” shaft, 3 spokes) IHS927 $59.99 Cover (For Tilt wheel steering) fits: Same as IHS850 IHS422 $51.50 Steering Wheel fits: M, Supers, I, Replaces: 400213R1 USA made W9 series, 400, 450, 600, 650 (All w/ NOTE: Black plastic. Not exact of 4-spoke), Replaces: 557282R91 original. (20” dia., keyed hub, 3/4” shaft, IHS852 $89.99 4 spokes)
IHS685 $3.99 Steering Wheel Nut (For IHS683, IHS299, Steering Wheel Cap fits: Same as SteinerIHS328, IHS422) IHS850, Replaces: 400220R1 IHS419 $51.50 Steering Wheel fits: Late 140, 240, 330, 340, 350, 404, (424, 444 w/ manual IHS852GK $9.99 Gasket only (For IHS852) steering), 450, 460, (504 w/ manual IHS1381 $21.50 steering), 560, 660, 3414, 4100, 4156, Tilt Steering Wheel Cap Mounting 4166, 4186 (All w/ splined hub) Plate fits: Same as IHS850 Replaces: 366557R1 (18” dia., splined Replaces: 400395R1 hub, 36 splines, 7/8” shaft, 3 covered to (2.940” O.D., .485” tall) center shiny spokes) NOTE: Steel.
ABC504 $5.95 Steering Wheel Nut (For IHS173, IHS419) Steering wheels, parts continue on next page
STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com 347 Steering wheels, parts cont... Steering wheels, parts cont... Part # USD Description / Application Part # USD Description / Application IHS2095 $4.79 Steering Wheel Horn Button Spring DEC522 $8.25 fits: Same as IHS850 Decal (For IHS781) USA made Replaces: 400396R1 (1-3/4” O.D.) USA made NOTE: This spring is required to maintain pressure on the cap (IHS852). The cap will not fit correctly IHS682 $15.95 w/out the spring. Dust Cover fits: Same as IHS542 IHS926 $14.85 Knob (For Tilt Steering Adjustment Replaces: 382587R1 NOTE: Rubber. Lever) fits: Same as IHS850 Replaces: 400214R1 GTS002 $49.50 Steering Wheel fits: Cub Cadets: NOTE: Black rubber. Original, 70, 71, 72, 73, 100 IHS980 $16.85 (All w/ 7 HP & up to SN: 400000) Replaces: 376176R1 Tilt Steering Adjustment Lever (13” dia., 40 spline, 11/16” hub dia., fits: Same as IHS850 bare spokes) Replaces: 400214R2 USA made IHS685 $3.99 Steering Wheel Nut (For GTS002) GTS001 $51.50 Inc.® IHS542 $61.50 Steering Wheel fits the following w/ Steering Wheel fits: Cub Cadets: 100, regular or telescopic steering: (424, 444 102, 122, 123, Replaces: 385734R1 w/ power steering), 454, 464, 484, 485, (13” dia., 40 splines, 11/16” shaft, (504 w/ power steering), 544, 574, 584, covered to center spokes) 606, 656, 664, 666, 674, 684, 686, 706, Case IH
IH/Farmall 756, 766, 784, 786, 806, 826, 856, 884, IHS685 $3.99 Steering Wheel Nut (For GTS001) 886, 966, 986, 1026, 1066, 1086, 1206, ABC503 $17.69 Steering Wheel Cap Serviceable for 1256, 1456, 1466, 1468, 1486, 1566, 1568, Parts,Cub Cadets: 100, 102, 104, 105, 122, 123, 1586, 2400, 2424, 2444, 2500, 3088, 3288, 124, 125, 126, 127, 147, 382, 482, (Late 3388, 3588, 3688, 3788 4166, 4186; Case 982, 984, 1100), 1872, 1912, 1914 /IH 4210, 4230, 4240 4366, 4386, 4568, Replaces: 731-3012 NOTE: Clear cap, 4586, 4786 , 5088, 5288, 5488, 6388, 6588, no decal. 6788, 7288, 7488; Case C50, C60, C70, C80, C90, C100; Hydros 70, 84, 86, 100, IHS863 $36.99 186, 3488; Combines: 205, 315, 403, 403 Hillside, 453, 503, 615, 715, 815, Serviceable Steering Wheel Cap Chassis parts 915, 1400, 1420, 1440, 1460, 1470, 1480; (For GTS001) Windrowers: 275, 375; Cotton Pickers: 414, 416, 420, 422, 616, 622, 782; Cotton TractorIHS860 $61.50 Serviceable Steering Wheel fits: Cub Harvester: 95, 1400, Replaces: 385156R1 (16” dia., splined hub, 36 splines, 7/8” LoBoy 154, Cub LoBoy 184, Cub LoBoy shaft, 3 covered to center shiny spokes) 185, (Cub Cadet 982 SN: 665001 & up), Cub Cadet 1872, 1912, 1914, 2072; ABC504 $5.95 Steering Wheel Nut (For IHS542) Serviceable for wheels w/ 2-1/2” IHS522 $51.50 center cap opening, Replaces: 404601R1 Steering Wheel Cap (Power Steering) (15” dia., 40 splines, 11/16” shaft, fits: Same as IHS542 covered to center spokes) Replaces: 378395R1 ABC502 $2.99 Steering Wheel Nut (For IHS860) IHS2322 $8.95 ABC4697Steiner $2.89 NEW! O-Ring only (For Steering Wheel Steering Column Grommet fits: Early Cap) fits: IHS522, Replaces: A24160 Cub Cadet up to SN: 400000, 154, 184, (2.800” I.D., 0.103” thick, 90 Duro) 185, Replaces: 376254R1 USA made USA made NOTE: O-ring is included NOTE: 1 used per tractor. w/ our steering wheel caps. IHS863 $36.99 IHS781 $12.50 Steering Wheel Cap Steering Wheel Cap fits: Same as fits: Same as IHS542 IHS860, Replaces: 393157R2, 533742R1 Replaces: 68837C3 (2.511” O.D)
348 STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm Steering wheels, parts cont... Steering parts Part # USD Description / Application Part # USD Description / Application CKS126 $72.99 Steering Wheel fits the following IHS844 $29.99 Magnums w/ covered spoke steering Steering Shaft Support Knuckle wheel: 7110, 7120, 7130, 7140, 7150, fits: Cub, Cub LoBoy 7210, 7220, 7230, 7240, 7250, 8910, 8920, Replaces: 350902R 8930, 8940, 8950 (15-1/4” dia. 36 spline, 13/16” shaft, 3 covered to IHS964 $29.99 center spokes) Steering Shaft Support Knuckle JDS519 $15.95 Steering Wheel Acorn Nut fits: A, Super A, B, 100, 130, 140 Serviceable for Cub - 650 (All w/ Replaces: 9442DAX exposed nut); Correct for W400 w/ manual steering, Replaces: 364360R1 IHS148 $13.50 Steering Arm Knuckle Set Screw (3/4”-16 NF x .859” tall) fits: Cub up to SN: 118687 NOTE: Stainless steel. Replaces: 43528D JDS564 $12.50 (1/2”-13 NC) USA made IHS133 $13.19 Power Steering Plate Serviceable for H Steering Arm Knuckle Set Screw w/ - 650 (All w/ exposed nut) Nut fits: A, C, Supers w/ wide front Replaces: 43466DBInc.® USA made IH/Farmall IHS685 $3.99 Steering Wheel Nut fits: Cub, Cub ABC1501 $10.95 Lower Steering Worm Wheel Shaft Seal IH/Farmall LoBoy, A, B, C, H, M, MD, Supers, I, O, fits: Cub, Cub LoBoy Case IH W4 - W9 series, Supers, 100, 130, 200, Replaces: 350891R91, 358836R91, 230, F300, F350, F400, F450; Lawn & 370510R91 (1.125” I.D., 1.565” O.D., Garden: 70, 71, 72, 73, 100, 102, 104, 106, 0.250” wide) NOTE: Seal for splined 122, 124, 126 (All up to SN: 400000); shaft that center tie rod arm mounts on.
800, 1000, 1200, 582 (All SN: 400001 & ABC1514 $10.95 Steering Wheel Worm Shaft Seal Chassis parts up), Replaces: 114499, 219753, 122403 Parts,(For long steering wheel shaft) fits: (3/4”-16 NF x .444” tall) Cub, Cub LoBoy, Replaces: 350892R91, ABC504 $5.95 Steering Wheel Nut fits: 140, 240, 385703R92 (0.875” I.D., 1.379” O.D., (F300, I300 w/ power steering), 330, 0.250” wide) NOTE: Will not fit 154, 340, (F350, I350 w/ power steering), 184, 185. 400, 404, 504, B414, 424, 444, 450, 460, IHS1764 $125.00 504, 560, 660, 3414, 4100, 4156, 4166, Steering Sector Shaft fits: A, AI, AV, 4186 (All w/ splined hub); Also fits Supers, Replaces: 47683DB USA made Montgomery Ward tractors NOTE: 4140 steel. Square end for Replaces: 367232R1, 368576R1 steering arm. (13/16”-20 UNEF)Tractor IHS983 $9.95 Steering Wheel Nut fits: 300, 400, IHS606 $95.50 Steering Sector Shaft fits: Some A, Super W400, 600, 650 (All w/ original power A, 100, 130, Replaces: 356549R1 steering plate), Replaces: 366285R1 (3/16” keyway at gear end, 1/4” (13/16”-20 UNEF) USA made keyway at tapered end) NOTE: Zinc plated. USA made NOTE: 4140 steel. Threaded FDS197 $7.95 end drilled for cotter key. Thread size Steering Wheel Nut fits: B250, B275 7/8” -14. Replaces: 751454R1 (5/8”-18 NF x 1.132” tall) IHS1774 $95.99 Steering Sector Shaft fits: 140 Replaces: 70890C1 MIS103Steiner $13.25 (1/4” wide keyways) USA made Steering Wheel Spinner NOTE: 4140 steel. Threaded end fits: IH/Farmall models drilled for cotter key. Thread size NOTE: Aluminum. 7/8”-14. IHS607 $13.95 ABC4246 $15.99 Nut fits: Some A, Super A, 100, 130, 140 Deluxe Steering Wheel Spinner Replaces: 359040R1 fits: IH/Farmall models (7/8”-14 thread) USA made NOTE: Rubber. Fits all steering wheels up to 1-1/4” thick. Steering parts continue on next page
STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com 349 Steering parts cont... Steering parts cont... Part # USD Description / Application Part # USD Description / Application IHS1776 $19.99 Vertical Steering Shaft Bushing IHS2945 $9.75 Steering Worm Shaft Bearing fits: B, BN, fits: A, Super A, 100, 130, 140 C, H, M, MD, MTA, Supers, 200, 230, Replaces: 47676DR 240, F300, F340, F350, 400, 404, (424, 444 (1.190” I.D. 1.325” O.D., 1.689” o/a w/out power steering), 450, F504 length) NOTE: Must ream to size Replaces: ST225B, 84330084 after installed. Fits IHS606, IHS1764, (0.984” I.D., 2.047” O.D., 0.590” width) IHS1774 sector shafts. NOTE: Open sides, not sealed. For sealed bearing order ABC2937. See IHS1566 $63.50 2-pc. Steering Shaft Support Bearing website for full applications. Assembly fits: C, Super C, 200, 230, 240, 404, 2404, Replaces: 351125R1, R2, IHS3496 $13.50 Steering Worm Shaft Rear Bushing 351126R1, R11, R12 fits: A, B, C, Supers, 100, 130, 140, 200, NOTE: Made from ductile iron. 230, 240 - mounts in rear of steering gear housing; H, M, Supers & MTA, IHS605 $146.95 F300, F340, F350, F400, F450 - mounts Steering Sector Gear fits: Some A, in upper bolster housing; I4 - Super Super A, 100, 130, Replaces: 47677DA, WD6TA - mounts in steering gearbox 351815R1 (9 full teeth, 3/16” keyway) housing, Replaces: 41096DBR (1.000” I.D., 1.129”Inc.® O.D., 1.252” o/a IHS1778 $149.95 length, 0.065” thick) Steering Sector Gear fits: 140 IHS2930 $22.95 Steering Worm Bearing Retainer Replaces: 70888C1 fits: A, B SN: 7014 & up; C, H, I, O, M, (9 full teeth, 1/4” wide keyway) MD, W4, W6 series & Supers, MTA, 100 - 240, F300, F340, F350, F400, 404, F450, Case IH ABC1628 $15.79 Lower Steering Shaft Seal fits: A, Super (424, 444 w/out power steering), F504 IH/Farmall A, 100, 130, 140, Replaces: 47703D, Replaces: 6660DA (2-3/16” - 12 RH 358775R91, 358815R91, 382230R91 thread) USA made (1.187” I.D., 2.004” O.D., 0.250” width) Parts, IHS746 $89.99 NOTE: Seal for shaft that center tie rod Steering Sector Gear fits: H, Super H, arm mounts to. F300, F350, Replaces: 50038DB IHS1532 $13.49 Steering Wheel Worm Shaft Seal NOTE: 32 teeth. Full circle style. Can fits: A, Super A, 100, 130, 140 replace 19 tooth sector (1/2 moon style). Replaces: 48956D, 358229R91 (1.624” O.D., 1.000” I.D., .250” wide) IHS750 $139.99 NOTE: For long steering wheel shaft. Steering Worm Shaft fits: H, Super H, Chassis parts IHS1800 $74.95 F300, F350, Replaces: 50047DB 11-pc. Steering Sector Bushing, Bearing (Threaded end: 3/4”-16 NF) & Seal Kit fits: A, Super A, 100, 130, 140 series NOTE: BushingsTractor must be sized. IHS3245 $4.99 See website for replacement numbers. Steering Worm Gear Housing Cover IHS018 $399.99 Lower Radiator / Steering Gear Housing Gasket fits: H, Super H, F300, F350 fits: Cub, Cub LoBoy, Replaces: 350886R11 Replaces: 43799DA USA made NOTE: For gaskets use IHS1526 & IHS188GK. Includes the steering worm shaft bushing and the steering sector ABC3745 $10.79 bushing. Both are installed. NEW! Upper Bolster Pivot Shaft IHS1526 $13.50 Steering Gear Housing Gasket Set Horizontal Seal fits: H, Super H, F300, Steinerfits: Cub, Cub LoBoy F350, Replaces: 42183DA, 389445R91 Replaces: 350893R1, 350899R1 (1.250” I.D., 1.987” O.D., 0.250” wide) USA made NOTE: Includes (1) steering worm shaft gasket, (1) steering gear IHS2931 $154.50 housing base gasket. Use w/ IHS018 Steering Sector Gear fits: M, MD, housing & IHS188GK gasket. Supers, MTA, 400, 450 IHS188GK $9.75 Replaces: 50037DB Mounting Gasket (For Cub Radiator) NOTE: 32 teeth. Full circle style. Can USA made replace 19 tooth sector (1/2 moon style).
350 STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm Steering parts cont... Steering parts cont... Part # USD Description / Application Part # USD Description / Application IHS2943 $179.99 Steering Worm Shaft fits: M, MV; Super NEW! $25.99 M & MTA both up to SN: F52627 or IHS3909 L512541 gas, LP; 400 SN: 21804 & up (Upper) Bolster Shaft Bushing fits: H, HV, LP only w/ 22” tank & w/out factory Super H, Super HV, F300, F350 power steering; 450 up to SN: 13135 IHS3909: Replaces: 368097R91 LP only w/ 22” tank & w/out factory (1.252” I.D., 1.370” O.D., 2.375” o/a power steering, Replaces: 50052DB length) (46-1/2” o/a length, threaded end: IHS3901 $59.99 IHS3901: Replaces: 49658DAR 3/4”-16 NF) NOTE: Does NOT fit (Lower) diesel tractors, 400 gas, 450 gas. (2.590” I.D., 2.790” O.D., 3.121” o/a length) NOTE: See website for IHS3250 $5.95 individual replacement numbers. Steering Worm Gear Housing Cover Gasket fits: M, MD, Supers, MTA, F400, IHS3922 $54.99 F450, Replaces: 48952DA USA made O.E.M. Upper Bolster Pivot Shaft Thrust Bearing fits: H SN: 167994 & up, Super H, F300, F350, Replaces: 354676R91 ABC2837 $10.95 (1.630” I.D., 2.510” O.D., .750” wide) Upper Bolster Pivot Shaft Horizontal Inc.® USA made Seal fits: M, MD, Supers, MTA, 400, 450 IH/Farmall IH/Farmall Replaces: 364470R91, 289198 IHS3904 $13.89 Case IH (1.500” I.D., 2.380” O.D., 0.315” wide) Upper Bolster Pivot Shaft Seal fits: H, HV & Supers, F300, F350 IHS3929 $10.95 Replaces: 42183DA, 389445R91 Upper Bolster Shaft Felt Washer fits: H (1.250” I.D., 1.987” O.D., .250” wide) SN: 167994 & up, Super H, F300, F350 Chassis parts Replaces: 350000R1 (1.615” I.D., 2.000” IHS3915Parts,$25.99 O.D., .575” wide) USA made (Upper) Bolster Shaft Bushing fits: M, Super M, IHS3932 $21.50 MTA, (Super MV SN: F45371 & up), 400, Upper Bolster Shaft Felt Washer 450 Rowcrops Retainer fits: H SN: 167994 & up, Super IHS3915: Replaces: 45172DR H, F300, F350, Replaces: 68963D (1.635" O.D., 1.520" I.D., 2.375" o/a (2.150” flange I.D. , 1.685” hole I.D. , IHS3906 $56.50 length) 2.523” O.D.) (Lower) IHS3911 $199.99 9-pc. Upper Front Bolster Shaft Repair IHS3906: Replaces: 49661DAR Kit fits: H SN: 167994 & up, Super H, (3.755” O.D., 3.620” I.D., 3.629” o/a F300, F350, Replaces:Tractor 368097R91 length ) NOTE: Includes upper & lower bushings, steering worm shaft seal & IHS3918 $59.99 OEM Upper Bolster Pivot Shaft bushing, cover gasket, thrust bearing, Thrust Bearing fits: M, Super M, MTA, felt washer & retainer. See website for (Super MV SN: F45371 & up), 400, 450 individual replacement numbers. Rowcrops, Replaces: 354675R91 IHS3920 $179.99 9-pc. Upper Front Bolster Shaft Repair (1.625” I.D., 2.563” O.D., .750” wide) Kit fits: M, MD, Supers, Super MTA, USA made MDTA, (Super MDV, Super MV both IHS3924 $4.99 SN: F45371 & up), 400, 450 Rowcrop Upper Bolster Shaft Felt Washer fits: M, Replaces: 368098R91 NOTE: See Super M, MTA, (Super MV SN: F45371 Steinerwebsite for individual replacement & up); 400, 450 Rowcrops numbers. Includes upper & lower Replaces: 49663D (2.060” I.D., 2.655” bushings, steering worm shaft seal & O.D., .525” wide) USA made bushing, cover gasket, thrust bearing, IHS3927 $15.28 felt washer, retainer. Upper Bolster Felt Washer Retainer IHS036 $149.99 fits: Same as IHS3924, Replaces: 49664D Upper Front Pivot Bolster Shaft (2.743” flange I.D., 3.505” flange O.D., fits: H, HV, F300, F350, Super H, Super 2.155” hole I.D., .563” wide) HV, Replaces: 67837DB, 69060D Steering parts continue on next page
STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com 351 Steering parts cont... Power steering parts Part # USD Description / Application Part # USD Description / Application ABC1630 $8.89 Steering Wheel Worm Shaft Seal ABC1233 $385.00 Belt Driven Power Steering Pump fits: B, BN, C, H, M, MD & Supers, MTA, (For tractors using Eaton style pump) 200, 230, 240, F300, F340, F350, 400, fits: IH models, Replaces: 363185R91, F404, 450, F504, Replaces: 43800D,DA, Eaton P761, 20928, 503-1003, 503-1005- 359042R91, 359257R91, 364468R91, 005 NOTE: For 5/8-18 male inverted 381721R91, 488561R91 flare pressure line. Can be adapted (1.000” I.D., 1.503” O.D., 0.250” wide) to tractors using Char-Lynn power IHS1922 $36.99 Steering Sector Pin Stud fits the steering w/ Eaton pump. Does not following w/ manual or power steering: include brackets, reservoir or pulley. I300, I330, I340, I350, I460 Utilities ABC3275 $19.59 10-pc. Eaton Power Steering Pump Seal NOTE: Fits into sector 365841R91 or & O-Ring Kit fits: H - 450 (All w/ Eaton 372592R91. Must weld in place of belt driven power steering pump) original. 1 used per tractor. NOTE: See website for all ABC2962 $8.95 11-pc. Steering Worm Shaft Ball Kit applications. Includes filter O-ring. fits: Utility w/ manual steering; 300, Fits ABC1233. 330, 340, 460, Replaces: 16010R1, ABC3277 $12.95 Power Steering Pump Filter fits: H - 450 17010R1, 86642304 (5/16” chrome steel, (All using Eaton belt driven power Grade 25) USA made NOTE: 28 used steering pump), Inc.®Replaces: 7304 per tractor. Must order 3 kits. (1.020" I.D., 2.990" O.D., 1.610" height) JDS2045 $18.89 USA made NOTE: Used w/ ABC1233 Rear Manual Steering Worm Shaft apps. Check website for additional Needle Bearing fits: 404, 424, 444, 504 application information. Reservoir Replaces: 375705R91, 86589836 gasket / O-ring not included. Case-IH (1.393” I.D., 1.750” O.D., 0.998” long) IH/Farmall FDS1274 $52.95 Power Steering Pump Pulley fits: IH/ NOTE: 1 used. Farmall models (All using Eaton belt driven power steering pump) ABC166 $109.99 Steering Universal Joint w/ Yoke, Parts, (3.750" O.D., .671" bore, .1/8" keyway, Pins & Grease Fitting fits: H, M, MTA, 1/2" wide belt groove) NOTE: Cast iron. Supers, F300, F350, 400, 450 (7/8” dia. shaft on both ends) ABC1417 $39.99 USA made NOTE: To fit the above Power Steering Pump Pulley fits: IH / models the yoke must be cut from Farmall models (5" O.D., 0.675" bore, existing shaft & shaft drilled. 1/8" keyway, 1/2" belt width) USA made ABC2507 $17.95 Steering Shaft Cross & Bearing (U-Joint) Chassis parts fits the following as a steering u-joint: B, ABC1414 $49.99 Power Steering Pump Port Block C, H, M, MD & Supers, MTA, 200, 230, fits: IH models w/ Eaton style pump F240, F300, F340, F350, F400, 404, (424, Tractor w/ separate reservoir, Replaces: Eaton 444 manual steering only), F450, F460, 20925, AG33547A USA made F504, F560; Also fits the following as a ABC1419 $5.49 tilt wheel U-joint: 706 - 1568 Bolt (For ABC1414), Replaces: Eaton Replaces: 52977DAX, 357439R91 14126 USA made USA made NOTE: 1 to 4 used per NOTE: Yellow zinc; Grade 8. tractor; Sold individually. IHS1418 $74.95 Belt Driven Power Steering Pump ABC1565 $14.00 Lower Steering Shaft Oil Seal fits: B, BN, Bracket (For tractors using Eaton style C, Super C, 200, 230, 240, F340, (F404, pump) fits: M & Supers, MTA, 400, 450, F504 when used w/ 350009R12 cover) W6 - W450 gas, LP, Replaces: Eaton Replaces: 48776D, 360457R91 Steiner 20969 USA made NOTE: Bolts to LH (2.750" I.D., 3.756" O.D., .438" wide) side of engine above the governor. IHS682 $15.95 Dust Cover / Umbrella fits: 544, 656, IHS555 $1,195.00 666, 686, 706, 756, 766, 786, 806, 826, 856, Char-Lynn Power Steering Torque 886, 966, 986, 1026, 1066, 1086, 1206, Generator w/out port block fits: H, M, 1256, 1456, 1466, 1468, 1486, 1566, 1568, MTA, Supers, F300 - 450 (7/8" shaft) 1586, 4156, 4166, 4186; Hydros: 70, 86, 100, Replaces: 382587R1 IHS555: Torque Output at 1000 PSI - 1100 in lbs.; Rated Operating NOTE: Rubber. Fits under steering Pressure - 1000 PSI; Max. Operating Speed at 3 GPM - 65 RPM; wheel & covers the orbit motor. Recommended Fluid Input - 3 to 4 GPM
352 STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm Power steering parts cont... Power steering parts cont... Part # USD Description / Application Part # USD Description / Application IHS673 $74.50 IHS4409 $329.99 NEW! Hydraulic Power Steering Port Block only (For IHS555) Cylinder fits: 454, 464, 474, 484, 485, USA made 495, 574, 584, 585, 595, 674, 684, 685, 784, 884, 885; Case IH C50, C60, C70, C80, C90, C100, CX50, CX60, CX70, CX80, ABC380 $101.50 CX90, CX100, MX80C, MX90C, MX100, (Original) MX100C, 395, 485, 495, 585, 595, 685, 885, 895, 3210, 3220, 3230, 4210, 4230, Char-Lynn Power Steering Slip Fit 4240, Replaces: 188842A1, 84336125 (14" Coupler (For IHS555) o/a length, 7-1/2" cylinder body length, (3-3/8" to 3-1/2" adjustable length) 2.885" cylinder body O.D., 3/4"-16 UNF ABC380: (3-3/8" to 3-1/2" adjustable male end, 9/16"-18 UNF female end) ABC497 $19.59 length) (Economy) IHS4418 $299.99 NEW! Hydraulic Power Steering Cylinder fits: Hydro 100 up to SN: ABC497: (2-5/8" o/a length) USA made 12694, 766 up to SN: 7175, 886 up to SN: 11559, 966 up to SN: 8056, 986 up to SN: 13974, 1066 up to SN: 8313, 1086 up to SN: 21426, 1466 up to SN: 7725, 1468, IHS675 $67.99 (1486 up to SN:Inc.® 12425), 1566 up to SN: Char-Lynn Power Steering Mounting 13608, 1568 up to SN: 8020, Replaces: IH/Farmall 533279R94 (3-1/4" from cylinder body IH/Farmall Bracket fits: M & SupersUSA made Case-IH to trunnion) NOTE: Threaded stub shaft on RH side. Early production IHS740 $229.99 Power Steering Priority Flow Control cylinder type. Valve fits: IH / Farmall models w/ IHS4414 $249.99 NEW! Hydraulic Power Steering LIVE hydraulics (1/2" NPT inlet, Cylinder fits: Hydro 100 SN: 12695 & up, 3/8" NPT return, 1/2" NPT to remote 766 SN: 7176 & up, 886 SN: 11560 & up, Chassis parts Parts,966 SN: 8057 & up, 986 SN: 13975 & up, cylinders) USA made NOTE: Eliminates belt 1066 SN: 8314 & up, 1086 SN: 21427 & driven pump, pulleys & brackets. up, 1466 SN: 7726 & up, 1486 SN: 12426 Enables you to use your hydraulic & up, 1566 SN: 13609 & up, 1568 SN: pump to operate the power steering. 8021 & up, 3088, 3288, 3688, Replaces: 63864C93 (2-1/4" from cylinder body Is preset at 1500 PSI & 8 gpm. Adjust to trunnion, 8" full rod length ) NOTE: to your application. Threaded stub shaft on RH side. Late IHS338 $9.95 Power Steering Reservoir Cap w/ production cylinder type. Gasket fits: M, MTA, Supers gas, diesel Replaces: 204827 (1-3/4" I.D., 1-3/8" tang to tang) NOTE:Tractor Has (2) tangs on Tie rods, parts Underside view top mounted from center out. Part # USD Description / Application ABC3352 $2.75 Gasket only (For IHS338) NOTE: NBR. IHS3169 $66.99 Tie Rod End Assembly fits: Cub, Cub IHS1420 $84.50 LoBoy, Replaces: 350779R1 (tie rod end), Crankshaft Drive Pulley (For Power 350780R1 (seat), 350781R1 (seat set screw) Steering) fits: M, Super M, MTA, 400, (1/2" - 20 NF thread, 2.752" o/a length) 450, W6 - W450 gas, LP, Replaces: Char- USA made NOTE: Includes seat & Lynn 5515 USA made set screw. 2 used per tractor; Sold individually. IHS3176 $14.95 Tie Rod Clamp fits: Cub, Cub LoBoy IHS3530Steiner $39.99 10-pc. Thompson Power Steering Pump both w/ adjustable axles O-ring & Gasket Kit fits: 340, 460, Replaces: 350784R1 NOTE: 2 used per 504, 560, 606, (F656 up to SN: 13011), tractor; Sold individually. 826, 1026 (All using Thompson pump 370924R91, 370924R92, 378865R91, IHS3180 $1.25 Tie Rod Jam Nut fits: Cub, Cub LoBoy, 381115R91, C768-35HP, FR922100), 154, 184, 185, Replaces: 114496, 124934 Replaces: 113788C1, 371542R92 USA (1/2" - 20 NF thread) USA made made NOTE: Verify pump number NOTE: 2 used per tractor; before ordering as there were different Sold individually. pumps used on these models. Tie rods, parts continue on next page
STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com 353 Tie rods, parts cont... Tie rods, parts cont... Part # USD Description / Application Part # USD Description / Application IHS3177 $49.99 Tie Rod w/ Ball End fits: Cub (1947-64) IHS2404 $18.99 Tie Rod End / Drag Link End fits: 154, w/ non-adjustable front axle (Does not fit 184, 185 (inner / outer tie rod end & drag LoBoys), Replaces: 351387R11 link ends), Replaces: 529430R1, 529431R1 (16-1/2" o/a length, 1/2" - 20 NF thread) (6 used, sold individually); Also fits some NOTE: 2 used per tractor; Cub Cadet '82' series, Replaces: 923-3015 Sold individually. Measure length Replaces: 923-3015 (1/2" - 20 NF thread, before ordering. socket o/a length: 2-1/2", (male stud IHS3174 $49.99 Tie Rod Tube w/ Ball End fits: Cub (1947- thread length: 1-1/8")) NOTE: See 64) w/ adjustable front axle (Does not fit website for full applications. LoBoys or High Clearance) IHS814 $54.99 Tie Rod End Assembly fits: A, AV; (Super Replaces: 350782R11 A, Super AV - both up to SN: 318309); (14-5/8" o/a length) NOTE: 2 used per C, Super C, Replaces: 43468D, 48280DB, tractor; Sold individually. Measure 57875D USA made length before ordering. IHS3172 $32.50 Tie Rod Bar w/ Notches fits: Farmall IHS819 $49.99 Tie Rod End fits the following w/ Cub (1947-64), IH Cub (1964-79) both w/ (Inner automotive type tie rod ends: Late Super Notched) adjustable front axle, Replaces: 350778R1 A, AV SN: 318310 & up,C, Super C, 100, (13-5/8" o/a length, 1/2" - 20 NF thread, 130, 200, 230, 385, Inc.®424, Some 454, 464, 484 0.498" O.D., 5 notches ) USA made w/ swept back axle w/ 44 - 72" Axle or 48 NOTE: 2 used per tractor; - 80" Axle, some 485, 495, some 574, 585, Sold individually. 595, 674, 695 w/ swept back axle, 784, 884, 885, 2424 IHS3184 $73.99 Tie Rod w/ Ball End fits: Cub LoBoy up IHS819: Replaces: 356544R11 to SN: 4801 w/ non-adjustable front axle,
Case-IH IHS817 $25.99 (1/2" dia. thread; Stud taper - .560" to IH/Farmall & w/out automotive style tie rods (Outer .630" (.750" dia. rod, 16" from end to Replaces: 364012R11 (17-3/8" o/a length, threaded) grease zerk, 1/2" dia. threaded stud taper 1/2" - 20 NF thread) NOTE: 2 used per Parts,= .560" to .630")) tractor; Sold individually. Measure length before ordering. IHS817: Replaces: 356540R91 IHS3188 $49.95 Tie Rod w/ Ball End fits: Cub LoBoy SN: (1/2" dia. thread; Stud taper - .560" to 4802 & up w/ non-adjustable front axle, .630" (11/16" threaded R/H, 18 thread, w/out automotive style tie rods 3.062" rom threaded end to grease zerk) Replaces: 368087R11 (18-7/16" o/a NOTE: Check dimensions before length, 1/2" - 20 NF thread) ordering.
Chassis parts NOTE: 2 used per tractor; JDS052 $21.75 Inner Tie Rod End fits: H, M, MD, Supers, Sold individually. Measure length F300, F350, F400, F450 (All w/ factory IH before ordering. wide front & tie rods behind the axle) IHS3182 $69.99 Tractor Tie Rod Tube w/ Ball End fits: Cub LoBoy Replaces: 359981R91 only up to SN: 4801 w/ adjustable front (.875" dia., RH thread, 3.875" threaded axle, Replaces: 364081R11 end to grease zerk) (13-1/2" o/a length) NOTE: 2 used per FDS315 $17.95 tractor; Sold individually. Measure Front Tie Rod End fits: 300, 330, 340, length before ordering. 350, 460 Utilities, Replaces: 363160R91, 365852R91 (.687" - 18 LH thread, 4.00" to IHS3186 $72.50 Tie Rod Tube w/ Ball End fits: Cub LoBoy center of post) SN: 4302 & up w/ adjustable front axle ABC265 $17.59 Replaces: 368094R91, 368095R91 Rear Tie Rod End fits: 300, 330, 340, Steiner(14-3/4" o/a length) NOTE: 2 used per 350, 460 Utilities, Replaces: 363161R92, tractor; Sold individually. Measure 365853R91 (.687" - 18 RH thread, 4.250" to length before ordering. center of post)
IHS3179 $32.50 Tie Rod Bar w/ Notches fits: Cub LoBoy IHS4354 $26.99 NEW! Tie Rod End, LH outer fits (1955-68) w/ adjustable front axle following w/ straight front axle: 385, 454, Replaces: 364080R1 (12-9/16" long, 484, 485, 574, 584, 585, 674, 684, 784, 884, 1/2" - 20 NF thread, 5 notches) H84; Industrials: 2400A, 2500A USA made NOTE: 2 used per tractor; Replaces: 65079C91, 1538016C1 Sold individually. (15" o/a length, 0.750" dia., 6 notches)
354 STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm Tie rods, parts cont... Tie rod boots cont... Part # USD Description / Application Part # USD Description / Application IHS4361 $24.99 NEW! Tie Rod End, LH outer fits the following w/ swept back front axle: 385, 454, 484, 485, 574, 584, 585, 674; Industrial: 2400A, 2500A, Replaces: 65082C91, FDS336 ABC371 FDS337 ABC369 ABC368 ABC370 527660R91 (16" o/a length, 0.750" dia., 7 notches, 0.562" thread size) FDS336 $3.99 (1.200" base, .475" tall, .500" hole I.D.) NOTE: Use w/ original steering arm ABC371 $3.99 (1.300" base, .965" tall, .500" hole I.D.) (405836R1, 405837R1). Be sure to measure thread size before ordering. FDS337 $4.49 (1.450" base, .600" tall, .550" hole I.D.) IHS894 $114.95 Tie Rod Assembly fits the following ABC369 $3.49 (1.575" base, .600" tall, .650" hole I.D.) Farmall w/ IH factory wide fronts Row ABC368 $3.99 Fits: Same as IHS894 crop models w/ tie rods behind center (1.675" base, .900" tall, .625" hole I.D.) axle: 460, 544, 560, 656, 666, 686, 706, 756, ABC370 $3.99 Fits: Same as IHS110, IHS111 766, 786, 806, 826, 856, 886, 966, 986, 1026, (1.800" base, .765" tall, .740" hole I.D.) 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586 (Can be modified to fit late H - 450 if shorten length by approx. 1"), Replaces: 358979R91, 359569R91, Front axle parts Inc.® 359986R1, 383917R1 (.762" at taper) Part # USD Description / Application IH/Farmall NOTE: Will NOT fit Swartz/Speeco IH/Farmall
IHS296 $19.95 Case-IH etc. aftermarket front axles. Check Wide Front Axle Molded Rubber measurement prior to ordering. Bumper fits: Farmall C, Super C, 200, IHS110 $22.99 Tie Rod End fits: Same as IHS894 except 230, Replaces: 352482R1 USA made (Inner individual parts will not fit H - 450 NOTE: Sold individually. threaded) IHS110: Replaces: 384006R92 Chassis parts (1" threaded R/H, 16 thread, 3.750" from IHS3892 $16.95 threaded end to grease zerk, .762" at Parts,Wide Front Axle Clamp Pin fits: 300 taper) Utility up to SN: 28702 w/ adjustable axle, Replaces: 361852R1 IHS111 $39.99 IHS111: Replaces: 359984R93 (.625" O.D., 5.488" o/a length) (Outer) (15-3/4" long, .920" dia., 6 notches, USwA made NOTE: Clear zinc plated. .762" at taper) NOTE: Will NOT fit 2 used per tractor; Sold individually. Swartz/Speeco etc. aftermarket front Exact of original. axles. Check measurement prior to IHS3898 $16.95 ordering. Wide Front Axle Clamp Pin fits the following w/ adjustable steel tube factory IH wide front end: F300, F350, Tractor F400, F450, F460, F544, F560, F656, H, Tie rod boots Super H, M, MD, Super M, Super MD, Part # USD Description / Application MTA, 706 - 1256, Replaces: 350557R1 JDS736 $4.89 Tie Rod Boot fits: C, Cub, Cub LoBoy, USA made NOTE: Clear zinc plated. Super A, Super AV, Super C, 100, 130, 140, 2 used per tractor; Sold individually. 200, 230, 240, F340, F404, F424, F444; Also Exact of original. fits the following w/ swept back axles: 454, 464, 484, Replaces: 358209R1 (1.500" IHS4091 $9.95 Front Axle Knee Extension Bolt base, .735" tall, .550" hole I.D.) NOTE: fits: Case IH 238, 248, 385, 395, 485, Check measurement prior to ordering. 485XL, 495, 495XL, 585, 585XL, 595, 595XL, 685 w / H.D. axle, 685XL w FDS484Steiner $16.50 Rear Tie Rod Boot w/ Leather Insert / H.D. axle, 695, 695XL, 885, 885XL, fits: I300, 330, I340, I350, I460 Utilities 895, 895XL, 995, 3220, 4210, 4230, 4240, Replaces: 363164R91 CX50, CX60, CX70, CX80, CX90, CX100 (1.425" base, .850" tall, .700" hole) (All w/ extensions w/ vertical holes); NOTE: Exact of original. IH 258, 385, 454, 474, 475, 484, 574, FDS335 $9.99 Rear Tie Rod Boot w/ Rubber Insert 584, 674, 684, 784, 884, H84 (All w/ fits: I300, I330, I340, I350, I460 Utilities extensions w/ vertical holes) Replaces: 363164R91 Replaces: 405584R2 (1.425" base, .850" tall, .700" hole) Front axle parts continue on next page
STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com 355 Front axle parts cont... Front axle parts cont... Part # USD Description / Application Part # USD Description / Application IHS056 $299.95 Wide Front Center Tube w/ Bushings IHS3955 $7.99 NEW! Wide Front Axle Spindle fits: Late H, M, MTA, Supers, F300, Bushing fits following w/ IH wide F350, 400, 450, 460, 544, 560, 656, 706, front axle: H, M, MD, Supers w/ tie 756, 806, 826, 856, 1026, 1206, 1256 (All rods behind the axle; Super H, MTA, Row-Crops & Hydro 70 w/ IH factory 300, 350, 385, 400, 450, (454 w/ straight wide front & tie rods behind center center axle), 460, 474, (484 w/ straight tube), Replaces: 358976R31, 383926R21 center axle), 485, I505, 544, 560, 574, 584, (tube); 48841D (bushing) 585, 606, 656, 660, 664, 666, 674, 684, (4-1/2" O.D. tube, 3.90" I.D. tube, 685, 686, Hydro 70 - 186, 706 - 1586, 784, 42-1/2" o/a length) USA made 785, 884, 885, 3088, 3288, 3488, 3688, IHS4159 $10.85 Wide Front Axle Pivot Pin Bushing (5088, 5288, 5488 w/ round tube center fits: Same as IHS056, W400, W450 axle), Replaces: 376099R1, 358958R1, Replaces: 48841D (1.245" I.D., 1.375" 358958R2 (1.814" O.D., 1.677" I.D., O.D., 1.486" long) NOTE: 2 used 2.000" o/a length) NOTE: See website per tractor; Sold individually. Must for all applications, including many be honed or reamed to size when Case IH models. 4 used per tractor; installed. Sold individually. IHS055 $319.99 Lower Front Pivot Bolster fits the IHS3949 $16.99 Inc.® NEW! Wide Front Axle Spindle following w/ tie rods in the rear: M, Bushing fits the following w/ regular MD, Super M, MTA, 400, 450, 544, 560, axle: 240, 330, 340, 404, 424, 444, F504; 656, 666, 686, 706, 756, 806, 826, 856, (454, 464, 484 w/ swept back axle) 1206, 1256, Hydro 70 w/ Factory IH Replaces: 368621R1 (1.580" O.D., wide front, Replaces: 383909R4 1.458" I.D., 1.508" o/a length) Case-IH
IH/Farmall IHS097 $29.99 Wide Front Bolster Pivot Pin fits the NOTE: Does not fit heavy duty axles. following Row-Crops: H, Super H, M, MD, Super M, MTA, Farmall 300, IHS3962Parts, $9.99 NEW! Wide Front Axle Spindle Felt Farmall 350, 400, 450, 460, 544, 560, 656, Sealing Washer fits the following w/ 666, 686, 706, 756, 806, 826, 856, 1206, factory IH wide front axle: H, M, MD, 1256, Hydro 70 w/ Factory IH wide Supers w/ tie rods behind axle; O6, front, Replaces: 358978R2 OS6, ODS6, W6, WD6, W6TA, 300, 350, (1-1/4" dia., 8-1/2" long) USA made 400, W400, 450, W450, 660, 2706, 21456 IHS457 $264.95 Replaces: 55412D (3.250" O.D., 2.625" USA made Front Pivot Bolster Bracket fits: 240, I.D., 0.375" thick) NOTE: 2 used per tractor; Chassis parts 404, 424, 444, 2404, 2424, 2444 Sold individually. Replaces: Casting 369008R1 NOTE: Close out. IHS3951 $9.99 Tractor NEW! Wide Front Axle Spindle Felt Sealing Washer fits follow w/ regular IHS457PIN $44.99 (not heavy duty axle): F240, I240, 330, Bolster Pivot Pin fits: Same as IHS457, F340, I340, F404, I404, 424, 444, F504 330, 340, Replaces: 368604R11 Replaces: 368627R1 (4-9/16" long, 1-3/16" dia) (2.563" O.D., 2.188" I.D., 0.250" thick) USA made NOTE: 2 used per tractor; IHS3947 $18.99 NEW! Wide Front Axle Spindle Sold individually. Bushing fits: Cub, Cub LoBoy Replaces: 350761R1 IHS3958 $2.99 NEW! Wide Front Spindle Felt Sealing (1.128" O.D., 0.995" I.D., 1.50" o/a Washer fits: 385, 454, 460, 484, 485, I504, Steinerlength) NOTE: 4 used per tractor; 544, 560, 574, 584, 585, 606, 656, 664, Sold individually. 666, 674, 684, 685, 686, 706 - 1586, 784, IHS3942 $12.99 NEW! Wide Front Axle Spindle 785, 884, 885, 3088, 3288, 3488, 3688, Bushing fits: A, AV, C, Supers, 100, 130, (5088, 5288, 5488 w/ round tube center 140, 200, 230 axle); Hydros: 70 - 186 Replaces: 60385DR, 356609R1 Replaces: 15943DA (2.844" O.D., 2.375" (1.237" I.D., 1.415" O.D., 1.760" o/a I.D., 0.188" thick) NOTE: See website length, 0.089" thick) NOTE: Fits both for all applications including many upper & lower. 4 used per tractor; Case IH models. 2 used per tractor; Sold individually. Sold individually.
356 STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm Front axle parts cont... Seats, parts cont... Part # USD Description / Application Part # USD Description / Application IHS3965 $25.99 NEW! Wide Front Axle Spindle Thrust IHS031A $31.50 Bearing fits: F240, I240, F340, F404, 464, (RH) F504, (I330, I340, I404, 424, 444 w/ ad- Flat Leaf Seat Spring fits: A, B & justable axle), 484 w/ swept back axle Supers, 100, 130, 140; Also fits IH 300, using 1-7/16" dia. spindle, (454, 2400A IHS031B $31.50 350, 460 Utilities w/ Low-Style seat both w/ swept back axle) (LH) IHS031A Replaces: 50587DB Replaces: 365317R91, 527294R91 IHS031B Replaces: 50586DB (2.463" O.D., 1.450" I.D., 0.621" thick) NOTE: 2 used per tractor; Sold individually. IHS938 $69.99 IHS3961 $14.99 NEW! Wide Front Axle Spindle Thrust (RH) Bearing fits the following w/ factory IH wide front axle: 385, 454, 460, 474, 484, 485, 504, 544, 560, 574, 584, 585, 606, Seat Support Bracket fits: A, B, Supers, 656, 660, 664, 666, 674, 684, 685, 686, 100, 130, 140 USA made IHS936 $71.99 Hydro 70 - Hydro 186, 706 - 1586, 784, NOTE: Powder coat. 785, 884, 885, 3088, 3288, 3488, 3688, (LH) (5088, 5288, 5488 w/ round tube center axle); Serviceable for H, M, MD, Supers Inc.® w/ tie rods behind the axle, 300, F300, IH/Farmall 350, I350, F400, F450, 660, but has a IHS3623 $79.99 IH/Farmall Case-IH smaller O.D., Replaces: 185106C91 RH Seat Support Base Bracket (2.750" O.D., 1.755" I.D., 0.752" thick) fits: B, BN, Replaces: 49369D NOTE: See website for all applica- USA made tions including many Case IH models. Sold individually; 2 used per tractor. IHS202 $249.95 Upholstered Flip-Back Seat fits: H, HV, Parts,M, MV, MD, MDV, I4, W4, O4, OS4, Chassis parts Super W4, I6, ID6, I9, ID9, W6, WD6, Seats, parts O6, OS6, W9, WD9, WDR9, WR9S, Super WD9, Replaces: 49498D Part # USD Description / Application USA made NOTE: Silver. Has side ABC4360 $134.99 rails for mount. (Chrome) NEW! Shallow Seat Pan Serviceable IHS728 $42.50 Seat Spring Coil fits: Same as IHS202 for 10-20, 15-30, (F12 up to SN: 22236), Replaces: 48930D F20 up to SN: 9759, F30 up to SN: 7632, (2-1/4" O.D., 4-3/4" tall) W12 up to SN: 3252, Replaces: MB488, IHS1700 $15.95 ABC4351 $82.50 MB488B (17-1/2" wide, 14" front to Seat Pivot Bracket Pin fits: Same as (Pewter) back, 3" tall, 1/2"Tractor single bolt hole) IHS202, Replaces: 51292DA USA made USA made NOTE: Steel. Powder coat paint. Uses 1-bolt mount. IHS029A $149.95 Deluxe Upholstered Seat Pan (Attaches w/ 4 bolts) fits: Cub, Cub LoBoy, C, H, M, Supers, MTA, 200, 230, F240, F300, IHS196A $209.99 Upholstered Flip-Back Seat w/ Seat F340, F350, F400, F450, F460, 600, 650; Lock Rod fits: A, B, Super A, 100, 130, Late F20, F30 w/ Monroe® Easy Ride Early 140; Will also fit IH 300, 350, 460 seat, Replaces: 351880R92, 351925R93, Utilities w/ low-style seat 357518R91 USA made NOTE: Red/ Replaces: 50570DC, 354157R92 White. Upholstered in a vinyl cover. SteinerUSA made NOTE: Red/White. IHS613 $199.95 Upholstered in a vinyl cover. Deluxe Upholstered Seat Pan w/ Brass IHS196 $254.99 Upholstered Flip-Back Seat w/ Seat Ring Drain Hole (Attaches w/ 4 bolts) Lock Rod fits: A, B, Super A, 100, 130, fits: Same as IHS029A Early 140; Will also fit IH 300, 350,460 Replaces: 351880R92, 351925R93, Utilities w/ low-style seat 357518R91 USA made Replaces: 50570DC, 354157R92 NOTE: Red/White. USA made NOTE: Silver. Upholstered in a nylon basket weave cover for Bottom view original look. Improved color. Seats, parts continue on next page
STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com 357 Seats, parts cont... Seats, parts cont... Part # USD Description / Application Part # USD Description / Application IHS029B $169.95 IHS977 $12.99 Hydraulic Flip Seat Rear Hinge Pin Deluxe Upholstered Seat Pan Clips & Spacers fits the following (Attaches w/ 4 bolts) fits: Same w/ hydraulic flip back seat: C, H, M, as IHS029A, Replaces: 351880R92, MD & Supers, MTA, Late Super W6 351925R93, 357518R91 USA made series, 200, 230, F300, F350, 400, W400, NOTE: Silver was used 1950 & up 450, W450, 460, 560, 600, 650, 660 w/ standard seat, Replaces: 356892R2 (pin), IHS614 $199.95 356893R2 (clip), 228280 (washer) (3/8" O.D. x 7" length) USA made Deluxe Upholstered Seat Pan w/ Brass IHS944 $8.49 Seat Mounting Plate Shoulder Bolt Ring Drain Hole (Attaches w/ 4 bolts) fits: C - W450; Also fits the following fits: Same as IHS029A w/ standard seat: F460, F560, 660 Replaces: 351880R92, 351925R93, Replaces: 352101R1, 358268R2 357518R91 USA made (1/2" x 20 N.F., 1-3/4" o/a length) NOTE: Silver. USA made NOTE: Used to bolt seat Bottom view base to battery box or toolbox. 4 used IHS029C $149.95 per tractor; Sold individually. Deluxe Upholstered Seat Pan IHS030 $29.95 Seat Spring CoilInc.® fits: C, H, M, Supers, (Attaches w/ 4 bolts) fits: Same as IHS029A, Replaces: 351880R92, MTA, 200, 230, 300, 350, 400, 450, 460, 351925R93, 357518R91 USA made 560, 600, 650, 660; Also fits Late F20, ® NOTE: Black was used prior to 1950, F30, B, BN w/ Monroe Easy Ride seat, Upholstered in a nylon basket weave Replaces: 354670R2 USA made cover for original look. ABC4566 $9.99 NEW! Conical Seat Spring Gasket (Pad) Case-IH
IH/Farmall fits: C, H, M, Supers, MTA, 200, 230, IHS1190 $5.99 Seat Pan Bolt Kit fits: Cub, Cub LoBoy, 300, 350, 400, 450, 460, 560, 600, 650, C, H, M, Supers, MTA, 200, 230, F240, 660; Also fits Late F20, F30, B, BN w/ F300, F340, F350, F400, F450, F460, Parts, Monroe® Easy Ride seat 600, 650; Also fits late F20, F30 when (352649R91 (bolt), 352100R1 (slot)) equipped w/ Monroe® Easy Ride Seat USA made Replaces: 103322, 181393, 114-308 (bolt), 81547 (lock washer) (7/16" NF x 3/4" IHS1309 $6.75 Seat Locator Spring fits: C, Super C, long) Super H, Super M, Super MD, MTA, 200, 230, F300, F350, F400, F450, W400, IHS933 $152.95 W450, F460, 560, 600, 650, 660
Chassis parts Toolbox & Seat Support fits: C, Super C Replaces: 352105R1 w/out remote or fasthitch (1.325" x .660" dia) USA made Replaces: 352086R91 USA made IHS1249 $14.99 Seat Locator Pin fits: Same as IHS1309 NOTE: Red powder coat.Tractor Replaces: 352600R91 (2.260" o/a length,1.500" O.D. big end, .499" O.D. pin) USA made NOTE: Zinc. IHS1502 $155.55 Toolbox & Seat Support fits the IHS1252 $5.49 'C' Clip Retainer fits: Same as IHS1309 following w/ remote or fast hitch: C, Replaces: 351128R1, 352122R1 Super C, 200, 230, Replaces: 356826R92, USA made NOTE: 1 used per tractor. 359572R92, 360710R93 USA made NOTE: Red powder coat. MIS006B $34.50
Tractor Seat Pad fits: 21" Pan ABC3910 $6.49 SteinerRope Trip Plow Clip fits: F20, F30, B, (side to side) (Foam pad, drawstring) BN, C, (H SN: 9287 & up), MD, MTA, USA made NOTE: Red/White. O4, OS4, O6, OS6, ODS6, Super C - MTA, W4 - WR9S, 200, 230, (300, 340, 350 Row-Crops), W400, 400, W450, 450, MIS006S $41.99 (460, 560, 660 Row-Crops w/ pan seat), ® Tractor Seat Pad fits: 21" Pan 600, 650 (All w/ Monroe Easy Ride (side to side) (Foam pad, drawstring) seat), Replaces: 58709D, 352118R1 USA made NOTE: Silver. (2.993" o/a length, 0.056" thick, 0.462" & 0.751" O.D. holes) USA made
358 STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm Seats, parts cont... Seats, parts cont... Part # USD Description / Application Part # USD Description / Application MIS006BK $41.99 IHS664 $345.75 Deluxe Seat Cushion Assembly w/ Metal Frame fits: 200, 230, 240, 330, 340, Tractor Seat Pad fits: 21" Pan IH 460, T4, T5, TD5 (side to side) (Drawstring, 1-1/2" thick) Replaces: 371625R1, 371626R1, USA made NOTE: Black. 371627R91 USA made NOTE: Like original.
IHS665 $99.95 Back Rest Cushion only (For IHS664) IHS879 $259.99 Deluxe Seat Frame only fits: Cub, Cub USA made LoBoy (Both w/ Deluxe Seat Assembly) IHS666 $189.99 Bottom Cushion only fits: Same as IHS664 Replaces: 364399R91 USA made (Bracket = 16-1/2" c.c., 19-1/2" long IHS670 $379.99 x 14-1/2" wide) NOTE: Powder coat Seat Cushion Assembly fits: 460, 560, red. Will fit IHS580, IHS578, IHS861, 660 w/ Standard seat JDS272L, JDS270 & JDS274 cushions. Replaces: 372759R92 USA made Mounting brackets NOT available NOTE: Upholstered in red & white from STP, Inc. vinyl. Back rest & bottom cushions JDS272L $51.50 Back Rest Seat Cushion fits: Cub, Cub have steel cores.Inc.® Like original. LoBoy, 100, 130,140, 300 Utility, 330, 350 IHS667 $356.50 IH/Farmall Utility (All w/ deluxe seat assembly) Deluxe Seat Cushion Assembly w/ IH/Farmall Replaces: 363219R91 Metal Frame fits: Farmall 460, 560, 660 Case-IH NOTE: Upholstered in black vinyl (All w/ Deluxe seats not Standard) w/ brass rivets, steel backed. Replaces: 372752R94 USA made JDS270 $72.50 NOTE: Like original. Bottom Seat Cushion (Wood bottom
w/ original style springs & steel corner IHS668 $99.95 Back Rest Cushion only (For IHS667) Chassis parts protectors) fits: Sames as JDS272L Parts,USA made Replaces: 363220R91 IHS669 $179.99 Bottom Cushion only (For IHS667) NOTE: Black vinyl. USA made IHS3729 $164.99 NEW! Rubber Torsion Seat Spring Set JDS274 $37.99 Arm Rest Seat Cushion fits: Same as fits: F460 up to SN: 16930, F560 up to JDS272L, Replaces: 363740R91 SN: 26959, I560 up to SN: 3105, I660 NOTE: Upholstered in black vinyl, up to SN: 3407 (All w/ deluxe vertical steel backed. acting seat), Replaces: 372736R1 (LH), 372737R1 (RH) NOTE: Sold as a LH/ IHS580 $47.99 RH pair. Back Rest Seat CushionTractor fits: Cub, Cub IHS881 $399.99 Seat Cushion Set fits: Some Hydro 70, LoBoy, 100, 130,140, 300 Utility, 330, 350 (Restoration 86, 100, 504 Deluxe, 544 Row Crop, 574, Utility (All w/ deluxe seat assembly) Quality) 606, 656, 666, 686, (706 SN: 15678 & up), Replaces: 363219R91 NOTE: 756, 766, 786, (806 SN: 11549 & up), 826, Upholstered in silver nylon basket 856, 966, 1026, 1066, 1206, 1256, 1456, weave w/ brass rivets, steel backed. 1466, 1468, 1566, 1568, 4100, 4156, 4166, (4186 SN: 19259 & up) IHS578 $72.50 IHS881: Replaces: 387174R92, Bottom Seat Cushion fits: Same as 387177R92, 400711R2 USA made IHS580, Replaces: 363220R91 NOTE: Upholstered in silver nylon Steiner IHS534 $189.99 IHS534: Replaces: 387174R92, basket weave w/ wood bottom w/ (Economy) 387177R92, 400711R2 original style springs. NOTE: IHS534 is upholstered in a black & white vinyl. Back rest cushion IHS861 $37.99 Arm Rest Seat Cushion fits: Same as is steel backed. Set includes: Bottom IHS580, Replaces: 363740R91 seat cushion, lower wrap around NOTE: Upholstered in silver nylon backrest & upper back rest. IHS881 & basket weave, steel backed in a silver IHS534 do not include the brackets & basket weave nylon with a steel back. bolts. Two used per seat; Sold individually. Seats, parts continue on next page
STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com 359 Seats, parts cont... Seats, parts cont... Part # USD Description / Application Part # USD Description / Application IHS671 $79.99 Seat Cushion Support Plate Kit IHS1620 $31.50 fits: Some Hydro 70, 86, 100, 504 Seat Support Rear Cover fits: 706, 806, Deluxe, 544 Row Crop, 574, 606, 656, 1206, 2706, 21206, Replaces: 383175R1 666, 686, (706 SN: 15678 & up), 756, USA made 766, 786, (806 SN: 11549 & up), 826, 856, 966, 1026, 1066, 1206, 1256, 1456, 1466, IHS931 $39.99 1468, 1566, 1568, 4100, 4156, 4166, (4186 (Front) SN: 19259 & up), Replaces: 387172R1, 387173R1, 387178R1 USA made IHS660 $33.99 Back Plate only (For IHS671) USA made Seat Support Cover fits: 756, 766, 826, 856, 966, 1026, 1066, 1256, 1456, 1466, IHS3448 $44.95 Side Plates (LH & RH) only (For IHS671) 1468, 1566, 1568, Hydro 100 USA made IHS1655 $41.25 (Rear) IHS931 Replaces: 398013R3 IHS663 $6.99 Seat Hardware Kit only (For IHS671) IHS1655 Replaces: 398015R2 USA made IHS343 $52.50 Rubber Seat Spring fits: 504, 544, (F560 SN: 59010 & up), I560 SN: 5521 & up, 656, (I660 SN: 6873 & up), 666, 686, 706, ABC445 $152.50 Inc.® 756, 766, 806, 826, 856, 966, 1026, 1066, Universal Full Suspension Seat w/ 1206, 1256 1456, 1466, 1468, 1566, 1568, back rest & 5-angle base w/ slide track 4100, 4156, 4166, 4186; Hydro 100 & mounting brackets fits: IH / Farmall (All w/ Mechanical Suspension) models NOTE: Can be adapted to fit Replaces: 380712R1 NOTE: Does not many utility tractors & lawn mowers. come w/ bushings. You must reuse or Case-IH IHS2368 $7.95 Seat Adjusting Knob fits following w/ IH/Farmall purchase IHS648 bushing repair kit. vertical acting deluxe seat: F504, F544, IHS648 $25.99 656, 666, 686, 706 - 1568 Seat Bushing Repair Kit fits: Same Parts,Replaces: 206286R1 (0.850" O.D., as IHS343 USA made NOTE: For 0.494" I.D.) NOTE: Slides over lever mechanical suspension seat, bushings (not threaded). must be reamed/honed when IHS1120 $25.99 Lower Shaft w/ Roll Pin at End installed. fits: 504, 544, 656, 666, 686, 706, 756, JDS533 $25.99 766, 806, 826, 856, 966, 1026, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568, 4100, Seat Adjustment Handle fits: Same 4156, 4166, 4186; Hydros: 70, 86, 100 as IHS343, Replaces: 372738R91,
Chassis parts (All w/ Suspension seat) 372739R91 Replaces: 380723R1 (6" long, 3/4" dia.) USA made NOTE: Steel. IHS1843 $9.49 TractorIHS1122 $15.79 Upper Shaft w/ Pin in Center fits: 504, Rubber Seat Bumper fits: Same as 544, 656, 666, 686, 706, 756, 766, 806, IHS343, Replaces: 381238R1 826, 856, 966, 1026, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568, 4100, 4156, 4166, 4186; Hydros: 70, 86, 100 IHS883 $499.95 Seat Assembly w/ Arm Rests (All w/ Suspension seat) (Black) fits: 756 - 1568 series, Hydro 100; Replaces: 380722R1 (5-3/4" long, Serviceable for 706 - 1206 3/4" dia.) USA made NOTE: Steel. Replaces: 400688R2, 400689R3, IHS979 $32.99 Upper Shock Bolt Spacers & Tube 400690R2, 400692R2, 400693R1, Assembly fits the following w/ 400694R1, 400698R1 MHS044, IHS347 style shock: C SN: Steiner(Upholstered in black or white vinyl. 36426 & up, H, M, MD & Supers, MTA, 4" foam seat cushion. 2" foam back seat IHS885 $549.95 Late Super W6 series, 200, 230, F300, cushion. Has 'IH' indentation in metal (White) F350, 400, 450, W400, W450; Fits the back rest cover) USA made following w/standard seat: 460, 560, NOTE: Restoration quality. Drilled 600, 650, 660, Replaces: 361033R91; for 06, 26, 56 & 66 series mechanical or 181413 (bolt); (2) 354731R1 (spacers); hydraulic seat. Must reuse (2) original 354730R1 (tube); 354732R1 (nut) front & rear horizontal mounting (7/16" NF x 3-7/16" length bolt, (2) brackets from your original seat to 5/8" thick spacers, 2-3/16" length tube) mount. USA made
360 STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm Seats, parts cont... Seat shock absorbers cont... Part # USD Description / Application Part # USD Description / Application ABC537 $14.99 Seat Bearing (For Aftermarket Knoedler IHS465 $41.99 Seat Shock Absorber fits: H, M, MTA Seats) fits: IH / Farmall models, B, & Supers w/ Mid-mounted shock BN, F20, F30, H, M (3/8" I.D., 1" O.D., absorber, Replaces: 353204R93 1-1/8" flange) USA made NOTE: 2 to 8 (Overall compressed = 9-1/8", fully used per tractor; Sold individually. extended = 11) NOTE: Horizontal bolt MHS046 $25.99 at one end & stud at other end. ABC526 $10.25 Seat Shock Bolt (For IHS329, IHS347, Seat Pivot Support Rod fits: Late F20, ® MHS044, IHS465); Also fits W400, Late F30 w/ Monroe Easy Ride seat W450, 600, 650, Replaces: 351751R1 (4" wide) USA made (7/16"-20 NF, .625" shoulder, 2.380" o/a length) USA made IHS584 $20.99 Seat Pivot Support Rod fits: C, H, M, IHS646 $49.95 Seat Shock Absorber w/ Hardware MTA, Supers, (Super W6 SN: 10001 & fits: Some 460, 504, 544, 560, 656, 660, up), W6TA series, 200, 230, F-300, F-350, 666, 686, 706, 756, 766, 806, 826, 856, 400, 450, 600, 650, some 460, 560, 660 966, Hydro 70, 86 & 100, 1026, 1066, Replaces: 355753R1 (3-1/2") 1206, 1256, 1456, 1466, 1468, 1566, 1568, NOTE: Restoration quality. Includes 4100, 4156, 4166, 4186 (All w/ Deluxe (2) flat washers, (2) rubber bushings, seats), Replaces:Inc.® 372751R91 (2) #5 bolts. (7.815" o/a closed length, 3/8" NF IH/Farmall IHS585 $24.99 thread, 10.420" o/a extended length) IH/Farmall
Seat Pivot Support Rod fits: H, M & Case-IH Supers, Replaces: 352648R1 IHS325 $2.15 Seat Shock Bushing only (6") NOTE: Includes (2) flat washers, (For horizontal bolt hole) fits: Late F20, (2) rubber bushings, (2) #5 bolts. Exact Late F30 w/ Monroe® Easy Ride seat; of original. C, H, M, MTA, Supers, 200, 230, F-300, IHS325 $2.15 F-350, 400, 450, 460, 560, 600, 650, 660
Seat Bushing only (For MHS046, Chassis parts IHS584, IHS585), Replaces: 72696R1, Parts,Replaces: 72696R1, 250416R1 250416R1 (5/8" dia. hole) (5/8" dia. hole) NOTE: Rubber. 2 used NOTE: Rubber. 2 used per horizontal per horizontal bolt; Sold individually. bolt; Sold individually. IHS533 $1.55 Rubber Seat Shock Bushing (For Stud) fits: H, M, MTA & Supers Replaces: 353205R1 NOTE: 2 used per Seat shock absorbers shock stud; Sold individually. Part # USD Description / Application IHS329 $29.99 Rear-Mounted Seat Shock Absorber w/ Bushings fits: Late F20, Late F30 w/ Monroe® EasyTractor Ride seat; H, HV, Umbrella bracket M, MD, MV w/ rear-mounted shock Fits: A, AV, Super A, B, BN, 100, 130, 140 absorber, Replaces: 352587R92 (1-1/2" c.c. mounting bolt holes) (11-1/2" c.c. compressed; 18-1/8" fully extended) Description Part # USD MHS044 $43.99 Seat Shock Absorber w/ Bushings Umbrella Bracket...... IHS3629.....$59.95 fits: B, BN when equipped w/ optional NOTE: Mounts to the left seat support bracket (IHS936). Monroe® Easy Ride seat, C, H, M, MTA, Supers, 200, 230, F300, F350, 400, 450, F460, F560 w/ standard seat; Super W6, SteinerSW6TA both SN: 10001 & up; 600, 650, 660/ (All w/ standard seat) From a satisfied customer! IHS347 $45.99 Replaces: 351750R93 MHS044: (Center-to-center compressed “I have been very satisified with Steiner = 6-1/4", fully extended = 8-1/4") Tractor's service and communication and
IHS347: (Center-to-center compressed Jill with her parts work.” - garbo707245 = 7-1/4", fully extended = 9-1/8") NOTE: Horizontal bolt hole at each end.
STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com 361 Fenders, parts Fenders, parts cont... NOTE: Same gauge, weight & material as original. For best Part # USD Description / Application results fit fenders to tractor before painting. IHS710L $299.95 Part # USD Description / Application (LH) IHS573 $119.99 Flat Top Fender w/ JDS299 Grommet Fender fits: Cub, Cub LoBoy (2-Light Style) fits: 544, 656, 706, 756, 806, Replaces: 350961R12 826, 856, 1026, 1206, 1256, 1456; Will also NOTE: LH & RH are the same; fit 766 & up if 4-light fenders are ordered Sold individually. IHS710L Replaces: 399328R2 IHS710R $299.95 IHS710R Replaces: 399329R2 (RH) IHS363 $119.95 USA made NOTE: These fenders will Fender fits: A, AV, B, BN need to be sanded & filler primer to fill Replaces: 51179DX in any spots from spot welding. NOTE: LH & RH are the same; Sold individually.
IHS3155 $299.99 IHS576L $159.99 (LH) (LH) Flat Top Fender w/ JDS299 Grommet (1-Light Style) fits: 666, 686, 766, 966, 1066, 1466, 1468, 1566,Inc.® 1568; Hydros: 70, Fender fits: Super A, Super AV, 100, 130, 86, 100 140 IHS3157 $299.99 IHS3155 Replaces: 533187R1 IHS3157 Replaces: 533188R1 IHS576R $159.99 IHS576L Replaces: 350608R1 (RH) (RH) IHS576R Replaces: 350609R1 USA made NOTE: These fenders will need to be sanded & filler primer to fill
Case-IH in any spots from spot welding. IH/Farmall
JDS299Parts, $6.99 Fender Grommet fits: 544, 656, 666, 686, IHS357 $159.99 706, 756, 766, 806, 826, 856, 966, 1026, Fender fits: Farmall C 1066, 1206, 1256, 1456, 1466, 1468, 1566, Replaces: 351248R91 1568, Replaces: 388940R1 NOTE: LH & RH are the same; IHS707 $184.50 Sold individually. (LH) IHS709 $184.50 Mounting Bracket fits: IHS710L, (RH) IHS710R, IHS1355, IHS1357 Fenders Chassis parts IHS358 $169.99 Fender fits: Super C, 200, 230 IHS707 Replaces: 391992R91, 399335R1 Replaces: 351248R92 IHS709 Replaces: 391993R91, 399336R1 NOTE: LH & RH are theTractor same; Sold individually. IHS707 IHS709 IHS708 $25.99 U-Bolt w/ Hardware (For IHS707, IHS359 $14.99 Bolt (U-Shaped) w/ Hex Nuts & Washer IHS709, (Will not fit 544, 656, or 66 series) fits: C, Super C, 200, 230, 240, 404; Will Replaces: 388944R2, 584253R1 (flat fit IHS357, IHS358 Fenders, Replaces: washer), 103326 (lock washer), 220081 351250R1 NOTE: 1 needed per fender; (nuts) USA made NOTE: U-Bolt has Sold individually. 3/4" dia. & (2) required per tractor; Sold IHS356 $152.00 individually. Includes (2) heavy flat Fender fits: H, M, MTA & Supers, 300, washers, (2) lock washers, (2) nuts. Steiner350, 400, 450, Replaces: 51500DB IHS4283 $24.99 NEW! Fender Bolt fits: 766, 966, 1026, NOTE: LH & RH are the same; 1066, 1466, 1468, 1566, 1568, 21026 Sold individually. Replaces: 536670R1 (1/2"-13 x 10.72") NOTE: Use w/ IHS4288 rubber IHS364 $64.95 Fender Extension Kit (For IHS356) insulator. USA made NOTE: Includes: (2) IHS4288 $28.50 NEW! Rubber Insulator fits: 666, 686, 766, mounting plates, (8) bushings, (8) long 966, 1066, 1466, 1468, 1566, 1568; bolts, (8) short bolts, (16) washers, (8) Hydro 70, 86, 100, Replaces: 536671R1 nuts. NOTE: 4 used per tractor; IHS364B $2.99 Bushing only (For IHS356) USA made Sold individually.
362 STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm Fenders, parts cont... Step assemblies - USA made cont... Part # USD Description / Application Part # USD Description / Application IHS755 $49.99 IHS711EX $62.50 (LH) Mounting Step (Extended Drop) fits: Cub, Cub LoBoy NOTE: Primer. Platform Extension Plate fits: 756, 766, Mounts approximately 8" below in front 826, 856, 966, 1026, 1066, 1256, 1456, 1466, of platform. Aftermarket part. IHS756 $49.99 1468, 1566, 1568 USA made (RH) IHS228 $79.99 (LH) IHS229 $79.99 Double Step Assembly fits: 706, 756, 766, (RH) 806, 826, 856, 966, 1026, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568, Hydro 100 IHS228 Replaces: 395230R1 Grab handles - USA made IHS229 Replaces: 395123R1, 23977DB, Part # USD Description / Application DC, DD
IHS245 $42.99 IHS228 IHS229 LH Grab Handle fits: 706, 756, 766, 806, IHS1909 $299.99 826, 856, 966, 1026, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568 (All w/ Gear Drive) Inc.® LH Auxiliary Step Assembly Replaces: 397890R2 fits: 706 - 1568 (All w/out cabs) IH/Farmall IH/Farmall
NOTE: Powder coated red. Case-IH IHS246 $42.99 RH Grab Handle fits: 756, 766, 826, 856, 966, 1026, 1066, 1256, 1456, 1466, 1468, 1566, 1568 (All w/ Gear Drive) Replaces: 399306R2 IHS3799 $45.95 Toolboxes, light bar, parts Chassis parts LH Grab Handle fits: F544, F656, 666, 686 Parts, Part # USD Description / Application (All w/ gear drive), Replaces: 389031R1 IHS385 $34.95 IHS3802 $45.95 Toolbox w/ Standard Seat fits: Cub, Cub LoBoy w/ standard seat RH Grab Handle fits: F544, F656, 666, 686, Replaces: 351014R91 (All w/ gear drive), Hydros 70, 86
IHS1633 $29.95
IHS3794 $45.95 RH Grab Handle fits the following Toolbox fits: Cub w/ Deluxe seat, Cub Farmalls w/ gear drive: F706, 806, 1206; LoBoy, Replaces: 364072R91 Also fits the followingTractor w/ hydro drive: USA made NOTE: Bare steel. 826, 966, 1026, 1066, Hydro 100 Replaces: 394820R1, 394820R2 IHS369 $63.95 NOTE: Does not fit International Toolbox fits: A, B, BN, Super A, 100, 130, (Wheatland) models. 140, Replaces: 43527DAX NOTE: Fits under flip-back seat. IHS3791 $59.99 LH Grab Handle fits: 826, 966, 1026, 1066, Hydro 100, 2826, 21026 (All w/ Hydro ABC308 $39.99 (Red) drive), Replaces: 406067R2 Steiner Step assemblies - USA made Universal Toolbox fits: IH models NEW! $39.99 (4" wide, 11" long, 4-1/2" tall; 5-1/2" c.c. Part # USD Description / Application ABC4317 bolt holes) IHS711 $57.99 (Gray) Mounting Step fits: Cub, Cub LoBoy Replaces: 368578R11 NOTE: Primer. Mounts approximately 4" below in front of platform. Toolboxes, light bar, parts continue on next page
STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com 363 Toolboxes, light bar, parts cont... Floor mat - USA made Part # USD Description / Application (For tractors w/ Deluxe Red IH Cab) ABC472 $32.95 fits: 766, 966, 1066, 1466, 1468, 1566, 1568, Hydro 100, Replaces: 536768R2 Universal Toolbox fits: IH models (4" wide, 16" long, 4-1/4" tall) Description Part # USD Floor Mat...... IHS2221...... $179.99 ABC4542 $24.99 NOTE: Consists of a heavy duty 3/8" rubberized closed cell foam (Red) base w/ a 1/8" durable textured rubber top. Between these two layers is a PVC sound-deadening barrier. This industrial grade NEW! Universal Toolbox fits: IH models matting will provide years of use in high wear conditions while (4-1/2" wide, 16-3/8" long, 4-13/16" tall) maintaining its sound and vibration dampening qualities. ABC4545 $24.99 NOTE: Red. (Blue)
Cab parts IHS933 $152.95 Part # USD Description / Application Toolbox & Seat Support fits: C, Super C IHS3705 $34.95 w/out remote or fast hitch Inc.® Replaces: 352086R91 USA made Cab Mount Isolator (Insulator) fits: 786 - NOTE: Red powder coat. 1586, 3088 - 6788), Hydro 186; Combines: 1420 - 1688, Replaces: 117722C4 NOTE: 4 used per tractor; IHS1502 $155.55 Toolbox & Seat Support fits the following Sold individually. w/ remote or fast hitch: C, Super C, 200, Case-IH
IH/Farmall 230, Replaces: 356826R92, 359572R92, 360710R93 USA made MIS4602 $26.99 NOTE: Red powder coat. Parts,NEW! Door & Rear Window Strut IHS374 $107.95 fits: 384, 385, 484, 485, 584, 585, 684, 685, Toolbox fits: H, M, MTA, MD, Supers 784, 785, 884, 885; Case IH 385, 395, 485, NOTE: Includes Replaces: 999760R91 495, 585, 595, 685, 695, 785, 795, 884, 885, IHS686 brackets & (1) DEC448 lid decal. 895, Replaces: 3123040R1 Light bar mounted. (11.220" length, 3.622" piston stroke) NOTE: Both ends have nylon fittings. IHS686 $14.99 Brackets only (For IHS374 Toolbox) Chassis parts MIS4611 $29.99 NOTE: Clamps toolbox to light bar. NEW! Rear Window Strut fits: Case IH Sold in pairs. 485XL, 495XL, 585, 585XL, 595, 595XL, Tractor 685, 685XL, 695, 695XL, 743XL, 745XL, DEC448 $5.99 785XL, 795XL, 844XL, 856XL, 885, 885XL, Decal only (For IHS374 Toolbox lid) 895, 895XL, 955XL, 956, 956XL, 995, USA made 995XL, 1055XL, 1056, 1056XL, 1255XL, 1455XL, 3220, 3230, 4210, 4220, 4230, 4240 IHS232 $79.99 Replaces: 3234163R1 (19.685" long, 8.858" Light Bar only fits: H, M, MD, MTA, piston stroke) NOTE: Both ends have Supers, Replaces: 51675DC USA made ball & socket.
MIS4617 $19.99 IHS535 $15.95 U-Bolt Set only fits: H, M, MD, MTA, NEW! Roof Hatch Strut fits: IH 745, SteinerSupers, Replaces: 59468D (3/8 NF 844, 845, 885, 955, 956, 1055, 1056, 1255; thread) NOTE: Set includes (2) U-bolts, Case IH CX50, CX60, CX70, CX80, CX90, (4) nuts, (4) washers. Mounts headlight CX100, MX80C, MX90C, MX100, MX100C, bar to steering column. MX110, MX120, MX135, MX150, MX170, 485, 495, 585, 595, 685, 695, 743, 785, 795, IHS2517 $11.99 Toolbox Latch & Spring Assembly fits: 856, 895, 995, 1455, 3220, 3230, 4210, 4220, F544, F656, 666, 686, 706, 756, 766, 806, 4230, 4240, 5120, 5130, 5140, 5150, 5230, 826, 856, 966, 1026, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568; Hydros 70, 86, 100 5240, 5250, Replaces: 3399422R3 Replaces: 27452D (spring), 383114R1 (9.055" long, 2.756" piston stroke) (latch) NOTE: Both ends have metal eyelets.
364 STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm Brake master cylinders Brake parts cont... NOTE: Used w/ mineral based oil only. Part # USD Description / Application Part # USD Description / Application IHS873 $9.95 Brake Pedal Return Spring fits: Super IHS4120 $79.99 NEW! Brake Master Cylinder fits: Case H, Super M, Super O6, Super W6 series; IH 385 SN: 5001 - 5287 & 18001 & up, 395, F300, F350, 400, 450, F460, 560, 660 485, 495, 685, C50, C60, C70, C80, C90, Replaces: 357164R1 (3.850" o/a length) C100; Fits the following w/out cab: Case USA made NOTE: 4 used per tractor; IH 585, 595, 695, 885, 895, 995, (3220 SN: (2) brake pedal, (1) clutch pedal, (1) TA 11070000 & up), 3230, 4210, 4220, 4230, handle; Sold individually. 4240, Replaces: 1287843C92 IHS2692 $19.99 NOTE: 2 used per tractor; Brake Spring fits: W4, W6, WD6 Sold individually. Replaces: 53182D (8.488" o/a length, 0.685" O.D., 0.078" wire dia.) USA made IHS4128 $56.50 NEW! Brake Master Cylinder fits the NOTE: 2 used per tractor; following w/ cab: 485XL - 995, 3220, 3230, Sold individually. 4210, 4230, 4240; Following w/ or w/out cab: 685, 5120 - 5140, 5520 -5250, CX50 - IHS3664 $10.95 CX100, MX80C, MX90C, (MX100 - MX135 Brake Pedal Return Spring fits: 574, 2500A North America); McCormick w/ cab 2002 Replaces: 399743R1 (4.184" o/a length, & up: CX60 - CX110, MC80 - MC135, 0.814" O.D., 0.122" wire dia.) USA made MTX110 - MTX150, Replaces: 226301A1 Inc.® NOTE: 2 used per tractor; IHS1576 $13.75 Brake Pedal Return Spring fits: 756, 766, IH/Farmall Sold individually. 826, 856, 966, 1026, 1066, 1256, 1456, 1466, IH/Farmall Case-IH 1468, 1566, 1568, Hydro 100 Replaces: 59315D (.8735" spring O.D., Brake parts .095" wire dia.) USA made NOTE: 2 used per tractor; Part # USD Description / Application Sold individually.
IHS222 $63.50 IHS1581 $13.49 Chassis parts Parts,Brake Pedal Return Spring fits: 4100, 4156, Brake Cover fits: F12, F14, W12 4166, Replaces: 626206R1 Replaces: 23664DX USA made (4.463" o/a length, .083" wire dia, .744" spring O.D.) USA made
IHS014 $36.50 IHS148 $13.50 Brake Pedal Set Screw fits: A, B, Super A, Brake Drum fits: Cub, Cub LoBoy, 154, 100, 130, 140, Replaces: 43528D 184, 185, Replaces: 350805R2 (1/2"-13 NC) USA made
IHS3067 $9.25 Brake Pedal Pawl Pin fits: C, H, M, IHS880 $5.99 Brake Pedal Return TractorSpring fits: Cub, Cub Supers, MTA, I4, I6, W4, W6, 200, 230, LoBoy, Replaces: 350951R1 F300, F350, 400, 450, F460, 560, 660 (4-1/2" o/a length) USA made Replaces: 49209D USA made NOTE: 3 used per tractor; NOTE: Zinc plated. Sold individually. IHS3058 $75.00 Brake Lock Assist Attachment fits: H, IHS701 $14.99 Brake Pedal Return Spring fits: A, B, HV, (Super H up to SN: 19233 w/out Super A, 100, 130, 140 hydraulic reservoir under the fuel tank) Replaces: 47845DA (7" o/a length) USA made NOTE: Bolts to the hydraulic USA made NOTE: 3 used per tractor; pump control rod bracket under the light Sold individually. bar. Includes instructions & complete hardware. IHS804Steiner $13.49 Brake Pedal Return Spring fits: C, Super IHS3062 $75.00 Brake Lock Assist Attachment fits: M, C, 200, 230, Replaces: 351210R1 MD, (Super M & MD up to SN: F28174 (5-3/4" o/a length) NOTE: 3 used per & L504801 w/out hydraulic reservoir tractor; Sold individually. under fuel tank) USA made NOTE: Bolts IHS687 $8.20 Brake Pedal Return Spring fits: H, M (both to hydraulic pump control rod bracket w/ band brakes), Replaces: 48599DA under light bar. Will not fit tractors with (8-1/8" o/a length) USA made shutters or without the hydraulic control NOTE: 2 used per tractor; rod bracket. Sold individually. Brake parts continue on next page
STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com 365 Brake parts cont... Brake parts cont... Part # USD Description / Application Part # USD Description / Application IHS3066 $75.00 Brake Lock Assist Attachment fits: Super JDS1222 $14.50 Brake Pedal Shaft Seal fits: C, H, M, MTA, M SN: F28175 & up or L504802 & up w/ W4, W6, Supers, 200, 230, 240, 300, 330, hydraulic reservoir under fuel tank, Super 340, 350, 400, 404, 450, 460, 504, 544, 560, MTA series USA made NOTE: Bolts to 606, 656, 660, 664, 666, 686; Hydros: 70, 86 hydraulic pump control rod bracket Replaces: 380959R91 (1.125" I.D., 1.832" under light bar. Instructions & complete O.D., 0.250" wide) NOTE: 2 used per hardware included. tractor; Sold individually. IHS3259 $75.00 ABC2039 $9.79 Brake Lock Assist Attachment fits: F300 Brake Pedal Shaft Seal fits: W9, WD9, Row Crop SN: 7209 & up; Serviceable for WR9, WDR9, Supers, 600, 650 F300 SN: 501 - 7208, F350 Row Crop Replaces: 43509D, 938294R91 USA made (1.375" I.D, 2.130" O.D., 0.437" wide)
IHS688 $6.49 IHS3070 $75.00 Rubber Brake Boot / Dust Cover Brake Lock Assist Attachment fits: F400, (For Disc Brakes) fits: Late H SN: 391358 F450 USA made NOTE: Bolts to lower & up, Super C, Super H, 200, 230, 240, 300, dash panel. Includes instructions & 330, 340, 350, SuperInc.® W4, OS4 complete hardware. Replaces: 355976R1
IHS690 $6.49 IHS1373 $64.99 Clutch & Brake Pedal Shaft fits: C Rubber Brake Boot / Dust Cover Replaces: 351212R1 (For Disc Brakes) fits: Late M SN: 294226 Case-IH (19.95" long, 1.130" dia.) USA made IH/Farmall & up, Super M, MTA, Super W6, OS6, 400, IHS1374 $69.99 450, Replaces: 357044R1 Clutch & Brake Pedal Shaft fits: Super C, 200, 230 (All w/ disc brakes) Parts, IHS2817 $6.95 Replaces: 355971R1 Rubber Brake Boot / Dust Cover (19.57" long, 1.130" dia) USA made (For Disc Brakes) fits: 354, 364, 384, 424, 434, 444, (B414 SN: 31375 & up), 2300A, IHS1375 $69.99 Clutch & Brake Pedal Shaft fits: H, HV 2424, 2444, (3414 SN: 3516 & up) (both up to SN: 391357 & w/ band brakes) Replaces: 3064173R1 NOTE: 2 slotted Replaces: 50170DA openings. (22.56" long, 1.130" dia) USA made IHS692 $10.85 Chassis parts Rubber Brake Boot / Dust Cover IHS1376 $69.99 Clutch & Brake Pedal Shaft fits: H, HV (For Disc Brakes) fits: 460, 504, 544, 560, (both SN: 391358 & up), Super H, Super 606, 656, 660, 664, 666, 686; Hydros: 70, 86 HV, Super W4, 300, 330 &Tractor 350 Row-Crop Industrials: 2504, 2544, 2606, 2656 & Utility (All w/ disc brakes) Replaces: 368299R1 Replaces: 358051R1 (22.20" long, 1.130" dia) USA made MIS1131 $37.50 Brake Riveting Tool (1-1/4" deep throat, IHS1372 $69.99 Clutch & Brake Pedal Shaft fits: M, MV 1/8" dia. rivet punch) NOTE: Use to rivet (both up to SN: 294225); MD, MDV (both brake linings to existing shoe or band. up to SN: 285504) (All w/ band brakes) Includes a tool to drive out old rivets, Replaces: 50079D a tool to drill & countersink linings, a (25.12" long, 1.130" dia.) USA made tool to peen the new rivet & instructions. IHS1371 $69.99 Clutch & Brake Pedal Shaft fits: M, MV Mounts into vice. Not for use w/ deep Steiner(both SN: 294226 & up); MD, MDV (both recess shoes. SN: 285505 & up); Super M, MTA, Super W6, W6TA, 400, 450, W400, W450 (All w/ MIS2547 $92.50 disc brakes), Replaces: 357046R1 (24.94" long, 1.130" dia) USA made Brake Riveting Tool (For brake shoe & IHS1370 $69.99 disc relining for most tractors) Clutch & Brake Pedal Shaft fits: 560, 660 (3-3/8" deep throat, 2-1/8" high throat ) Replaces: 374850R1 USA made NOTE: Includes (2) punches. (24-3/4" long, 1.130" dia.) USA made
366 STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm Lined brake bands Bonded brake discs, parts cont... NOTE: (1) lined brake band per wheel; (2) required per tractor; Part # USD Description / Application Sold individually. ABC428 $16.50 Part # USD Application Riveted Brake Disc fits: Late H SN: 391358 ABC337 $29.99 & up, Super H, Super HV, SW4, 300, EACH Fits: Cub up to SN: 173600 350 Row-Crop & Utility (All w/ factory Replaces: 350967R21 IH disc brakes), Replaces: 368183R91, NOTE: Brake rod attached to lining. 385195R91, 1975457C2 (5-5/8" dia., 10 spline, 1-7/8" spline I.D) NOTE: 4 used per tractor; ABC269 $25.95 Sold individually. EACH Fits: Cub SN: 173601 & up, Cub LoBoy, 154, 184, 185, Replaces: 358753R21 IHS826 $11.19 Adjusting Bolt (For Disc Brakes) fits: Late NOTE: Brake rod unpins from lining. H SN: 391358 & up, Super H, Super HV, SW4, 300 & 350 Row-Crop & Utility ABC110 $41.99 (All w/ factory IH disc brakes) EACH Fits: A, B, BN, (Super A up to SN: 339641) Replaces: 358050R1 (3/8" - 24 UNF x 4.25) Replaces: 51582DDX USA made NOTE: 2 used per tractor; NOTE: Brake rod attached to lining. Sold individually.
IHS231 $29.95 ABC453 $17.99 Riveted BrakeInc.® Disc fits: Late M SN: EACH Fits: Super A SN: 339642 & up, 100, 130, 294226 & up, Super M, (Late MD SN: IH/Farmall 140, Replaces: 358660R1 285505 & up), Super MD, Super MV, IH/Farmall Case-IH NOTE: Brake rod unpins from lining. Super MDV, MTA, SW6, Super WD6, Super W6TA, Super WD6TA, 400, W400, 450, W450 (All w/ factory IH disc brakes) IHS689 $29.95 Replaces: 368179R91, 121961C91, EACH Fits: C, Replaces: 351624R92 1963810C2 (6-1/2" dia., 12 spline,
NOTE: Brake rod unpins from lining. 2-1/4" spline I.D) NOTE: 4 used per Chassis parts Parts,tractor; Sold individually. IHS828 $12.85 Adjusting Bolt (For Disc Brakes) fits: Late IHS612 $36.95 M SN: 294226 & up, Super M, (Late MD EACH Fits: H, HV both up to SN: 391357, I4, O4, SN: 285505 & up), Super MD, Super MV, W4, Replaces: 58344DCX (2" wide) Super MDV, MTA, SW6, Super WD6, NOTE: Brake rod unpins from lining. Super W6TA, Super WD6TA, 400, W400, 450, W450 (All w/ factory IH disc brakes) ABC262 $45.95 Fits: M, MV up to SN: 294226, MD up to Replaces: 357040R1 (7/16" - 20 UNF EACH SN: 285505, I, O, W6 series x 4.50) USA made NOTE: 2 used per Replaces: 58345DCX (2" wide) tractor; Sold individually. NOTE: Brake rod unpins from lining. ABC561 $7.99 Tractor Actuating Spring (For Disc Brakes) fits: H, HV both Behlen & IHC, Super C, Super H, series, 200, 230, 240, 300, 330, 340, 350, Bonded brake discs, parts 404, 460, 504, 544, 606, Replaces: 354627R1 NOTE: Check dimensions on discs before ordering. (1.275" o/a length, .105" wire dia.) Sold individually USA made NOTE: 4 used per tractor; Sold individually. Part # USD Description / Application ABC426 $15.95 Riveted Brake Disc fits: Super C, 200, 230, IHS823 $5.69 Actuating Spring (For Disc Brakes) 240, 330, 340 gas, 404, 2404 fits: Late M SN: 294226 & up, Super M, SteinerReplaces: 356071R91, 368181R92, (Late MD SN: 285505 & up), Super MD, 368983R91, 1975456C2 Super MV, Super MDV, Super MTA, SW6, (5" dia., 10 spline, 1-5/8" spline I.D.) Super WD6, Super W6TA, 400, W400, 450, NOTE: 4 used per tractor; W450, 560, 656, 660, 664, 666, 686; Hydros: Sold individually. 70, 86 (All w/ factory IH disc brakes) IHS986 $9.95 Adjusting Bolt (For Disc Brakes) Replaces: 357116R1, 619731C1 fits: Super C, 200, 230, Replaces: 355977R1 (1.209" o/a length, 0.105" wire dia., (3/8" - 24 UNF x 4.450) USA made 0.761" O.D.) NOTE: 6 used per tractor; NOTE: 2 used per tractor; Sold individually. Sold individually. Bonded brake discs, parts continue on next page
STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com 367 Bonded brake discs, parts cont... Bonded brake discs, parts cont... Part # USD Description / Application Part # USD Description / Application IHS1136 $6.49 IHS3455 $12.75 4-pc. Brake Disc Seal Kit fits: 706, 756, 766, Disc Brake Actuating Spring fits: 354, 364, 806, 826, 856, 966, 1026, 1066, 1206, 1256, 384, B-414, 424, 434, 444, 2424, 2444 1456, 1466, 1468, Hydro 100 Replaces: 3066876R1 (1.095" o/a length, Replaces: 406726R91, 66487C91 .825" O.D., .110" dia. wire) USA made NOTE: 2 used per tractor; NOTE: Sold individually. Sold individually. ABC1225 $2.99 Disc Brake Ball fits: B250, B275, B414, H, HV, M, MD, Super C, Super H, Super HV, Super M, Super MTA, 200, 230, 240, 300, 330, 340, 350, 354, 364, 384, 400, W400, Rear axle parts 404, 424, 444, 450, W450, 460, 504, 544, Part # USD Description / Application 560, 606, 660, 656, 2404, 2504, 2606, 2656, IHS1516 $19.99 5-pc. Final Drive Gasket Set fits: Cub, 3414; IH Combines: 101, 151, 181 Cub LoBoy, 154, 184, 185 Replaces: 09384AB, 16028R1, 16779X, Replaces: 350804R1, 350820R1, 350823R1, 17028R1 (7/8" dia.) NOTE: Steel. 350827R1 USA made NOTE: Kit Sold individually. contains (1) rear axle housing oil pan ABC2713 $2.95 gasket, (1) outer seal cap gasket, (1) inner axle bearingInc.® cap gasket, (1) upper Disc Brake Ball fits: WDR9, WR9S, Super differential shaft gasket. 2 used per WD9, 600, 650, Replaces: 16100R1 tractor; Sold individually. (1" dia.) NOTE: Steel. Sold individually. IHS1518 $9.99 Rear Axle Housing Oil Pan Gasket fits: Same as IHS1516 ABC434 $19.99 Bonded Brake Disc fits: 340 diesel, 460, Replaces: 350827R1 USA made Case-IH 504, 606; Serviceable for 544, not sintered) NOTE: 2 used per tractor; IH/Farmall Replaces: 368292R92, 1975460C2; Sold individually. Serviceable for 1975462C3, 404918R91 IHS2365 $19.99 4-pc. Final Drive Gasket Kit fits: A, Super (6" dia., 10 spline, 1-7/8" spline I.D) Parts, A, B, BN, Replaces: 43245D, 47954D, (2) NOTE: 4 used per tractor; 48009DB USA made NOTE: Kit includes Sold individually. (1) rear axle housing oil pan gasket, (2) ABC430 $18.59 Riveted Brake Disc fits: IH 354, 364, 384, rear axle outer bearing retainer gaskets, 424, 434, 444, B414 SN: 31375 & up, 2300, (1) rear axle housing inner bearing cap 2424, 2444, 3414, 3444 gasket. 2 used per tractor; Replaces: 395161R1, 1975464C2, Sold individually. 3064170R91 (6-1/2" dia., 10 spline, 1-5/8"
Chassis parts IHS4460 $22.50 spline I.D) NOTE: 4 used per tractor; Sold individually. NEW! 4-pc. Final Drive Gasket Kit ABC432 $21.50 fits: 100, 130, 140, Replaces: 1342398C1, Bonded Brake Disc fits: Tractor560, 660 362778R2, 43245D, 47954D USA made Replaces: 369079R92, 1975446C3 (7" dia., 12 spline, 2-1/4" spline I.D) NOTE: 4 used per tractor; IHS3024 $9.99 Sold individually. Rear Axle Housing Oil Pan Gasket fits: A, B, BN, Super A, 100, 130, 140 IHS1484 $19.99 Bonded Brake Disc fits: 656, 664, 666, Replaces: 43245D USA made 686; Hydros: 70, 86, Replaces: 391445R1, 1975463C2, 1975463C3 ABC1510 $16.95 (6-1/2" dia., 10 spline, 3-1/2" hub) Outer Rear Axle Seal fits: Cub, Cub SteinerNOTE: 4 used per tractor; LoBoy, 154, 184, 185 Sold individually. Replaces: 350822R91,2, 358799R1, 547431R91 (3.066" O.D., 2.125" I.D., 0.510" ABC442 $21.95 Bonded Brake Disc fits: Super W9, Super wide) NOTE: Must reuse seal retainer. WD9, WR9S, 600, 650, 706, 756, 766, 806, 826, 856, 966, 1026, 1066 Hydro, ABC1503 $8.50 1206, Hydro 100, Replaces: 359853R91, Final Drive Upper Pinion Shaft Seal 384166R91, 1975468C2 fits: Cub, Cub LoBoy, 154, 184, 185 (8" dia., 12 spline, 2-1/4" spline I.D.) Replaces: 381907R91 NOTE: 4 used per tractor; (1.625" I.D., 2.441" O.D., .312" wide) Sold individually.
368 STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm Rear axle parts cont... Rear axle parts cont... Part # USD Description / Application Part # USD Description / Application ABC2819 $12.95 ABC2648 $16.50 Inner Differential Bearing Retainer Seal Bull Pinion Shaft Bearing Retainer Seal fits: Cub, Cub LoBoy, 154, 184, 185 fits: Super C, 200, 230, 240, 330, (340 gas, Replaces: 385872R91 LP), 404, 2404, Replaces: 380922R91 (1.832" O.D., 1.062" I.D., 0.250" wide) (2.754" O.D., 1.750" I.D., 0.500" wide) NOTE: 2 used per tractor; Sold NOTE: 2 used per tractor; individually. Mounts in 3-bolt retainer. Sold individually. ABC3196 $19.95 Bull Pinion Shaft Bearing Retainer Seal IHS2356 $8.99 Felt Washer fits as a rear stub axle felt fits: H, HV both up to SN: 391357, I4, O4, washer: A, Super A, B, BN (2 used per OS4, W4, Replaces: 48498D, 76510C91 tractor, sold individually); Also fits (2.313" I.D. x 3.505" O.D. x 0.313" width) as a differential counter shaft bearing NOTE: 2 used per tractor; felt washer: F20 & Regular (4 used per Sold individually. tractor, sold individually), Replaces: IHS3084 $10.79 15017D, 43242D (2.920" O.D., 2.000" I.D., Bull Pinion Shaft Bearing Retainer Seal 0.375" wide) USA made fits: H SN: 391358 & up, Super H, 300, (340 diesel), 350, 460, 504, 544, 606, 656, ABC1632 $9.99 664, 666, 686, Hydro 70, Hydro 86 Rear Outer Flanged Axle Seal fits: A, Replaces: 20290D, 383159R91, Super A, B, BN, Replaces: 43283D, 3108650R91 (1.875"Inc.® I.D., 2.875" O.D., 358767R91 (2.125" I.D., 3.001" O.D., 0.313" wide) NOTE: 2 used per tractor; IH/Farmall 0.434" wide) NOTE: 2 used per tractor; Sold individually. IH/Farmall Sold individually. Case-IH ABC3201 $19.95 Bull Pinion Shaft Bearing Retainer Seal fits: I, O, W, 6 & 9, (M up to SN: 294225), ABC1512 $15.79 (MD up to SN: 285504) (All w/ band RH Seed Drive Plate Seal (For final drive) brakes), Replaces: 45073D, 610870C92 fits: Cub, A, Super A, 100, 130, 140 (2.875" I.D., 3.756" O.D., 0.438" wide) Chassis parts Replaces: 382220R91, 53599D Parts,NOTE: 2 used per tractor; (2.632" O.D., 1.750" I.D., .500" wide) Sold individually. ABC3203 $16.99 Bull Pinion Shaft Bearing Retainer Seal ABC2689 $16.95 Final Drive Differential Bearing Retainer fits: M SN: 294226 & up w/ disc brakes, Seal fits: A, B, Super A, 100, 130, (140, but MD SN: 285504 & up w/ disc brakes, wider), Replaces: 46282D, 385865R91, Super M, Super MD, MTA, Super W6, 71597C91 (2.378" O.D., 1.531" I.D., 0.500" Super WD6, W6TA, WD6TA, 400, 450, wide) NOTE: 2 used per tractor; Sold W400, W450, 560, 660 individually. Mounts in 6578D retainer. Replaces: 1699480C91 (2.250 I.D., 3.256" O.D., 0.375" wide) NOTE: 2 used per ABC131 $10.59 Upper Differential Shaft Seal fits: A, AV, tractor; Sold individually. Super A, Super A1,Tractor Super AV, Super AV1, B, BN, 100, 130, 140, Replaces: 358786R91, ABC1503 $8.50 Bull Pinion Shaft Bearing Retainer Seal 358825R91, 386455R91 (2.000" I.D., 2.879" fits: B250, B275, B276, B414, 354, 364, 384, O.D., 0.312" wide) 424, 434, 444, 2424, 2444, 3414 NOTE: Mounts in final drive axle Replaces: 703907R91, 703908R92, housing. Seal is approximately .060" 3043788R92 (1.625" I.D., 2.441" O.D., narrower than original. .312" wide) ABC3298 $19.95 ABC3207 $19.95 Final Drive Flanged Axle Outer Seal Rear Axle Seal fits: C, Super C, 200, 230, fits: 100, 130, 140, Replaces: 362767R91 240, 404, Replaces: 60254D, 610867C92 (seal), 362777R1 (felt washer), 363771R91 (2.313" I.D. x 3.256" O.D. x 0.438" wide) Steiner(seal), 536144R91 (seal) (2.375" I.D., 3.255" NOTE: 2 used per tractor; O.D., 0.500" wide) NOTE: 2 used per Sold individually. tractor; Sold individually. IHS3827 $8.99 NEW! Rear Axle Outer Felt Washer Seal ABC3194 $23.50 Bull Pinion Shaft Bearing Retainer Seal fits: C, Super C, 200, 230, (240 Row-Crop fits: C, Replaces: 70201C1, 351108R91 & Utility), Replaces: 351118R1 (2.125" I.D. x 3.355" O.D. x 0.438" width) USA made NOTE: 2 used per tractor; NOTE: 2 used per tractor; Sold individually. Sold individually. Rear axle parts continue on next page
STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com 369 Rear axle parts cont... Bull pinions, seal
Part # USD Description / Application Part # USD Description / Application ABC1562 $11.95 Rear Axle Seal fits the following w/ IHS200 $172.50 2-1/2" O.D. rear axle: H, Supers, F300, RH Bull Pinion fits: 1086, 1486 F350, F340, F460, (I460 w/ adj axle) Replaces: 104680C1 NOTE: Hollow ends Replaces: 43722D, 358770R91, 360251R91, w/ differential lock. Close out. 377786R1,2 (3.548" O.D., 2.500" I.D., 0.438" wide) IHS201 $248.50 IHS4448 $8.99 LH Bull Pinion fits: 1086, 1486 NEW! Rear Axle Felt Seal fits: H, Super Replaces: 104676C1 NOTE: 1 end hollow H, (F300, F350, F460 w/ 2-1/2" O.D. w/ differential lock. Close out. axle), (I330, I340, I460 w/ adjustable axle) Replaces: 43720D USA made IHS4692 $5.50 NEW! Bull Pinion & Brake Shaft Seal ABC1565 $14.00 Rear Axle Seal fits the following w/ fits: M, MD, W6, WD6, O6 2-3/4" O.D. rear axle: M, MD, Supers, Replaces: 63089D USA made MTA, (F350 w/ H.D. axle), 400, 450, (F460 SN: 26550 & up), F504, I504, F544, 560, 656, 666, 686; Hydros: 70, 86 Replaces: 48776D, 358780R91, 358819R91, Inc.® 57085D (2.750" I.D., 3.756" O.D., .438" Pedal guards - USA made wide) Part # USD Application IHS4442 $8.99 NEW! Rear Axle Felt Seal fits: HV, M, IHS334 $36.95 Fits: A, BN, Super A; 100, 130, 140 MD, Supers, Super MTA; F300, F350 both (All w/out foot accelerator) equipped w/ 2-3/4" HD axle, 400, 450, Replaces: 48697DB Case-IH (460 up to SN: 26549 when equipped w/
IH/Farmall (17-1/2" long) 2-3/4" HD axle), 560 up to SN: 43903 Replaces: 45085D IHS334BParts, $46.50 COS024 $33.99 Rear Axle Outer Oil Seal fits: I6, ID6, W6, Fits: B. Replaces: 49371DA WD6, O6, ODS6 (All SN: 2927 & up); (21-3/8" long) W6TA, WD6TA, W400, W450 Replaces: 60624D (3.437" I.D., 4.254" O.D., 0.375" wide) NOTE: Measure before ordering. ABC3335 $22.50 Hydraulic parts Rear Axle Outer Seal fits: 1566, 1568, Part # USD Description / Application Chassis parts 1586, (4786 front & rear axles) IHS278 $599.95 Replaces: 67256C1 Live Hydraulic Pump 10 GPM @ 1600 (4.250" I.D., 5.250" O.D., 0.438" wide) RPM, 1200 PSI fits: H w/ F-300 front Tractor inner / outer timing cover; Super H, IHS3833 $5.99 NEW! Rear Axle Cap Gasket fits: C, Super W4, (300, 350 rowcrop & utility) Super C, 200, 230, (240, 404 Row-Crop & gas, Replaces: 363779R94 Utility); Industrial: 2404 NOTE: Customer must cut lines Replaces: 351117R1 (6 bolt holes) approximately 3/8" to work w/ original USA made NOTE: 2 used per tractor; 361603R92 all steel lines. Will work Sold individually. for lines w/ hoses 369448R91 & w/ IHS1237 port block. IHS3836 $5.99 NEW! Rear Axle Bearing Retainer Cap IHS1237 $64.95 Hydraulic Port Block fits: Super H, Gasket fits: H, Super H, I4, O4, W4, Super W4, 300, 350 gas SteinerSuper W4, I300, 330, 340, I350, I460, I504; (2-3/4" x 4" x 1", 3/4 NPT) The following w/ 2-1/2" axle O.D.: F300, USA made NOTE: Threaded for F350, F460, Replaces: 1342399C1, 48463D hydraulic hose. Fits IHS278. USA made IHS1440 $24.95 Hydraulic Dipstick fits the following IHS4445 $5.99 NEW! Rear Axle Bearing Retainer Cap when equipped w/ Lift All countershaft Gasket fits: M, MD, MTA, Supers, Super driven hydraulic pump: H, HV, M, MV, MTA diesel, (F300, F350, F460 all w/ MD, MDV, Supers, Replaces: 15158EX 2-3/4" HD axle), F560 606; Industrial: (11.800" long) USA made 2606, Replaces: 1981232C1, 48950D NOTE: Mounts inside the hydraulic USA made pump breather fill pipe.
370 STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm Hydraulic parts cont... Hydraulic parts cont... Part # USD Description / Application Part # USD Description / Application IHS284 $599.95 Live Hydraulic Pump 12.6 GPM @ 1450 IHS3520 $48.99 11-pc. Thompson Hydraulic Pump RPM, 1200 PSIfits: M w/ 400 gas inner Gasket, O-Ring & Seal Kit fits: 240, 330, & outer timing covers; Super M, Super 340, 424, 444 gas, LP (All using 9 gpm MTA, Super W6, Super W9, T6, 400, 450 Thompson hydraulic pumps 368633R91, gas, 600, 650; W9 gas (must use Super R92), Replaces: 368634R91 USA made W9 inner & outer timing covers) IHS3525 $49.99 9-pc. Pesco Hydraulic Pump Gasket, Replaces: 128190C91, 357214R92, O-Ring and Seal Kit fits: 240, 330, 340 362175R94 (Mounting bolt pattern Top (All using Pesco pump 368894R91), 3-3/8" c.c., bottom 2-5/8" c.c.) Replaces: 369783R91 USA made NOTE: Equipped w/ longer drive shaft NOTE: Does not include 369782R1 to run optional hour meter off the front washers. timing cover. If your tractor is not IHS3653 $79.99 equipped w/ this you may have to trim 13-pc. Thompson Hydraulic Pump Seal, 1/2" off end of shaft for clearance. O-Ring & Gasket Set fits: 300, 350 gas, LP, diesel, (H - W4 when converted to a IHS1240 $64.95 Hydraulic Port Block fits: M, Super M, Thompson live hydraulic pump) 400, 450 gas, diesel, W9, WD9, Super Replaces: 363783R93, 363783R94 W9, Super WD9, W6, Super W6, WD6, NOTE: Fits pumps 363779R91, Super WD6, 600, 650 (1" block x 2.195" 363779R92, Inc.®363779R93, 363779R94, x 4.00", 3/4 NPT) USA made NOTE: 366823R91, 366823R92, 366823R93. The IH/Farmall Threaded for hydraulic hose. Fits IH/Farmall pump number is stamped into the IHS284. Case-IH aluminum upper pump housing. IHS1924 $99.95 Hydraulic Pump Gear fits: Super A, C, IHS4716 $84.99 NEW! Super C, 100, 130, 140, 200, 230, 240, 13-pc. Hydraulic Cylinder Repair 330, 340 gas, 404, 424 gas, 444 gas, 2424 Kit fits: 766, 786, 886, 966, 986, 1066, gas, 2444 gas (fits Cessna, Pesco & 1086, 1466, 1468, 1486, 1566, 1568, 1586, Thompson hydraulic pumps w/ 9 GPM 3088, 3288, 3488, 3688, 5088, 5288, 5488; Chassis parts side engine mounted pump) Parts,Hydros: 100, 186, Replaces: 80446C91 Replaces: 350709R1 NOTE: 16 teeth. IHS4384 $8.99 NEW! Hydraulic Pump Oil Seal, IHS3479 $28.50 18-pc. Hydraulic Pump Gasket, O-Ring Touch-Control Pump Shaft & Seal Kit fits: Cub, Cub LoBoy both fits: Cub, Cub LoBoy w/ Pesco hydraulic pump 352035R92, Replaces: 355742R91 (0.500" shaft dia., R93, R94, Replaces: 355208R91, 124543, 1.124" OD, 0.250" wide) USA made 124925 USA made NOTE: Includes jam NOTE: For use w/ early pump number nut & drive key that most kits do not 352035R91 or (Pesco) 05 1004 040-01. include. Also includes instructions. ABC3326 $9.79 Live Hydraulic Pump Seal (For cam IHS3506 $62.75 18-pc. Pesco Hydraulic Pump Gasket, driven Pesco or Thompson pumps) O-Ring & Seal KitTractor fits: Super A, C, fits: A, C, Supers, 100, 130, 140, 200, 230, Super C, 100, 130, 140, 200, 230 (All 240, 330, 340, 404, (424, 444 gas) using factory Pesco pumps 350707R96, Replaces: 353183R91, 385038R91 355007R94, 355370R93, 360689R91) (0.625" I.D., 1.128" O.D., 0.250" wide) Replaces: 355207R91,355207R92, NOTE: See website for all 360691R91 USA made applications. NOTE: Includes ABC3326 seal. IHS158 $49.95 Hydraulic Pump Drive Gear IHS4243 $15.99 fits: Farmall 756 SN: 17636 & up, IH 756 6-pc. Hydraulic Pump Mounting Gasket SN: 8425 & up, Farmall 856 SN: 27287 & O-Ring Kit fits: Super A, Super AV, C, & up, IH 856 SN: 9493 & up, 766, 786, Super C, 100, 130, 140, 200, 230 826, 886, 966, 986, 1066, 1086, 1456, 1466, SteinerReplaces: 350706R3, 350708R2, 75285739 1486, 1566, 1568, 1586, 3088, 3288, 3688, USA made Hydro 100, Replaces: 405181R1 NOTE: 19 teeth at 25º tooth angle. IHS3511 $49.99 9-pc. Thompson Hydraulic Pump Gasket, O-Ring & Seal Kit fits: Super IHS521 $13.75 Touch Control Stop w/ Original Style A, C, Super C, 100, 130, 140, 200, 230 Handle fits: Cub, Super A, C, Super C, (All using factory Thompson pump 100, 130, 140, 200, Replaces: 350717R91 360945R91, R92), Replaces: 360957R91 NOTE: 4 used per tractor; USA made NOTE: Includes ABC3326 Sold individually. seal. Hydraulic parts continue on next page
STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com 371 Hydraulic parts cont... Hydraulic parts cont... Part # USD Description / Application Part # USD Description / Application IHS1252 $5.49 Retainer Clip (For Touch Control IHS3072 $37.99 Hydraulic Pump Control Rod fits: M, Friction Spring) fits: Cub, Cub LoBoy, MD, Early Supers w/ belly mounted Super A, C, Super C, 100, 130, 140, 200 pump, Replaces: 15092EX Replaces: 351128R1, 352122R1 (39-3/4" length, 3/8" O.D.) USA made USA made NOTE: 2 used per tractor; IHS3076 $32.50 Hydraulic Auxiliary Control Valve Sold individually. Control Rod fits: M, MD, Supers, MTA IHS836 $9.99 Touch Control Clevis Pin fits: Super A, when using optional live hydraulic C, Super C, 100, 130, 140, 200 pump & auxiliary control valve Replaces: 350142R1 Replaces: 359479R91 (43-1/2" length, (1/2" dia., 1-3/8" useable length, 3/8" O.D.) USA made 1-9/16" total length) IHS3079 $37.99 Hydraulic Pump Control Rod fits: Super M, Super MD, MTA w/ IHS3886 $18.99 Rockshaft Clevis Pin Link Lock w/ Flat live hydraulic pump & reservoir Link, Pin, Spring & Cotter Pin fits: C, mounted under the fuel tank, Replaces: Super A, Super AV, Super C, 100, 130, 140, 200, Replaces: 350188R2 358458R11 (22-1/4" long, has one (1) (3.990" o/a link length, 1.735" o/a pin 3/8"-16 NC threaded end) USA made length) USA made NOTE: Exact copy IHS780 $8.99 Position ControlInc.® Handle Knob fits: 240, of the original. Yellow / clear zinc 340, 354, 384, 404, B414, 460 Utility, 504, plated. Up to 3 used per tractor; Sold 606; Lawn & Garden tractors: 70, 71, 72, individually. 73, 100, 102, 104, 106, 122, 124 & 126 (All ABC2039 $9.79 up to SN: 400000); 86, 108, 128, 800, 1000 Lift All Hydraulic Pump Seal fits: H, & 1200 (All w/ SN: 400001 & up); 582, M, Early Supers, Replaces: 43509D, 582 SPL SN: 66500 & up Case-IH 938294R91 (1.375" I.D, 2.130" O.D.,
IH/Farmall Replaces: 371602R1 (3/8"-24 NF hole, 0.437" wide) NOTE: Fits countershaft 1.062" wide, 0.940" height) driven hydraulic pumps. IHS772Parts, $10.49 Position Control Handle Knob fits: 544, IHS366 $12.99 Lift All Control Rod Spring / Flat Hold- 656, 666, 686, 706, 756, 766, 806, 826, 856, Down Spring (For Hydraulic lift lever) 966, 1026, 1066, 1206, 1256, 1456, 1466, fits: H, M, Super H, Super M, MTA 1468, 1566, 1568; Hydros: 70, 86, 100 Replaces: 15137E Replaces: 382801R1 IHS4439 $4.99 NEW! Friction Disc (For hydraulic hand IHS774 $7.99 control lever) fits: Cub, Cub LoBoy, Hydraulic Sensitivity Control Knob
Chassis parts Super A, C, Super C, 100, 130, 140, 200 fits: 544, 656, 666, 686, 706, 756, 766, 806, Replaces: 63090D (1.650" O.D., 0.500" 826, 856, 966, 1026, 1066, 1206, 1256, hole, 0.150" thick) USA made 1456, 1466, 1468, 1566, 1568; Hydros: 70, Tractor 86, 100, Replaces: 382805R1 FDS073 $3.50 Lift Cover Friction Disc fits: 354, 2300, IHS744 $7.99 364, 424, 2424, 384, B-414, 434, 444, 2444 Hydraulic Remote Handle Knob Replaces: 3044397R1 fits: 706, 756, 766, 806, 826, 856, 966, (3" O.D., 1/2" center hole) USA made 1026, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568, Hydro 100, ABC539 $7.95 Replaces: 389168R1 (.620" hole I.D.) Hydraulic Touch Control Fill Plug fits: Cub, Cub LoBoy, Replaces: 445096 IHS243 $7.89 (7/8" - 18 UNF) USA made Hydraulic Remote Knob fits: Some 454 NOTE: White zinc finish. Replaces: 397931R2 Steiner (7/16" dia. hole, 2" long, 13/16" to ABC540 $3.39 Hydraulic Touch Control Fill Plug 1-5/16" O.D.) Gasket fits: Cub, Cub LoBoy Replaces: 3405H (.875" I.D.) USA made IHS3516 $13.95 Touch Control Valve Boot w/ Wire NOTE: Copper. fits: Cub, C, Super A, Super C, 100, IHS3068 $37.99 Hydraulic Pump Control Rod fits: H, 130, 140, 200, Replaces: 351753R1, R3; HV, (Super H, Super HV to SN: 19233) 19526D, 68251D (wire) (2-1/2" long) using belly mounted hydraulic pump USA made NOTE: Leather. Like Replaces: 15091EX original. Can replace the later rubber (38" length, 3/8" O.D.) USA made boot.
372 STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm Hydraulic parts cont... Hydraulic parts cont... Part # USD Description / Application Part # USD Description / Application IHS3508 $18.99 Touch Control Piston Sleeve Boot w/ ABC4544 $19.99 NEW! Hydraulic Filter fits: 656, 706, Wire fits: Cub, Super A, C, Super C, 100, 806, 856, 966, 1066, 1466 130, 140, 200, Replaces: 352005R1, R3; Replaces: 528493R3 (2.840" I.D., 5.061" 19526D, 68251D (wire) (5-1/2" long) O.D., 6.029" height) USA made USA made NOTE: Leather. Like NOTE: See website for all original. Can replace the later rubber applications. boot. ABC4541 $15.99 NEW! Hydraulic Filter fits: 826, 856, IHS2020 $9.95 Touch Control Valve Boot fits: Cub, C, 966, 7066; Hydros: 100, 186 (All w/ Super A, Super C, 100, 130, 140, 200 Hydro drive), Replaces: 69878C91 Replaces: 364832R1 (2.450" o/a length, (1.118" I.D., 2.903" O.D., 5.528" height) 1.755" hole dia. one end, 0.725" hole dia. USA made one end, 1.500" boot O.D.) NOTE: Rubber. 1 used for Cub, 2 used ABC4622 $17.99 NEW! Hydraulic Filter fits: 885, 1046, for all other; Sold individually. 1055, 1246, 9000; Case IH MXM: 120, 130, 140, 155, 190, 199; 1056XL, 1255XL IHS2024 $9.95 Touch Control Piston Sleeve Boot Replaces: 73321C1 (3.694" top O.D., fits: Cub, Super A, C, Super C, 100, 130, 6.987" height, 1"-12 thread size) 140, 200, Replaces: 364833R2 (2.425" o/a length, 0.875" hole dia. one USA made Inc.® end, 0.530" hole dia. one end, 1.235" ABC4562 $32.99 NEW! Hydraulic Filter fits: 1066, 1086, boot O.D.) NOTE: Rubber. 1 used for 1486, 1566, 1586, 3088, 3288, 3488, 3688 IH/Farmall IH/Farmall
Cub, 2 used for all others; Replaces: 1282428C1, 137938C91 Case-IH Sold individually. (3.698" top O.D., 5.184" height, 1-1/2"-16 ABC4556 $15.99 thread size) USA made NEW! Hydraulic Filter fits: 154, 184, 185 ABC4613 $19.99 Replaces: 404886R1 (3.660" top O.D., NEW! Hydraulic Filter fits: 3088, 3288, 3.790" height, 1"-12 thread size) 3588, 3588, 3788, 5088, 5288, 5488 USA made Chassis parts Parts,(3.698" top O.D., 5.171" height, 1-1/2"-16 ABC4550 $25.99 NEW! Hydraulic Filter fits: 340, 460, thread size) USA made 504, 544, 560, 606, 656, 660, 664, 666, 686; ABC4565 $31.99 Industrials, Replaces: 388084R93 NEW! Hydraulic Filter fits: 3388, 3588, (2.867" top I.D., 1.490" bottom I.D., 3788, 5088, 5288, 5488, 6388, 6588, 6788 7.230" top O.D., 4.636" bottom O.D., Replaces: 1272942C1 (3.698" top O.D., 2.473" height) USA made NOTE: See 7.803" height, 1-1/2"-16 thread size) website for all applications. USA made ABC4526 $19.99 NEW! Hydraulic Filter fits: 385, 454, ABC4559 $59.99 NEW! Hydraulic Filter fits: Case IH 335, 464, 484, 485, 574, 584, 585, 674, 684, 685, 784, 785, 884, 885; Case IH 385, 395, 485, 380, 385, 430, 435, 480, 485, 530, 535, 495, 585, 595, 685,Tractor 695, 885, 895, 995, 7110, 7120, 7130, 7140, 7150, 7210, 7220, 3220, 3230, 4210, 4230, 4240 7230, 7240, 7250, 9110, 9130, 9150, 9170, Replaces: 47393888, 93413C1 (2.938" 9180, 9210, 9230, 9240, 9250, 9260, 9270, I.D., 5.061" O.D., 3.045" height) 9280, Replaces: 1346028C1, 84239751 USA made NOTE: See website for all (3.810" top O.D., 9.490" height, 1-3/8"- applications. 12 thread size) USA made NOTE: See website for all applications. ABC4553 $13.99 NEW! Hydraulic Filter fits: 544, 656, ABC4535 $19.99 666, 686, 4366, Hydro 70, Hydro 86; Ind: NEW! Hydraulic Filter fits: Case IH 540, 2656, Replaces: 530824R2, 70203C2 541, Replaces: A39578 (3.670" top O.D., 5.157" height) (1.370" I.D., 2.312" O.D., 6.000" height) USA made Steiner USA made NOTE: See website for all ABC4580 $14.99 NEW! Hydraulic Filter fits gas/diesel: applications. 544, 756, 856; Gas: 656, 766, Hydro 70, ABC4583 $29.99 Hydro 86; Diesel: 664, 706, 786, 806, NEW! Hydraulic Filters fits: Case IH 826, 886, Hydro 84; Industrials; Case IH 1896, 2094, 2294, 2394, 2594, 3294 diesel: 385, 395, 485, 495, 585, 595, 685, Replaces: A147925, 47380629 695, 885, 895, 995, Replaces: 1004366C1, (2.282" I.D., 4.530" O.D., 7.120" height) A32297 (3.660" top O.D., 5.178" height, USA made NOTE: Includes (2) 1"-12 thread size) USA made elements & (1) gasket. NOTE: See website for all applications. Hydraulic parts continue on next page
STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com 373 Hydraulic parts cont... Hydraulic parts cont... Part # USD Description / Application Part # USD Description / Application ABC4586 $74.95 NEW! Hydraulic Filters fits: Case IH IHS3027 $43.99 24 pc. Hydraulic Touch Control Block 4494, 4694, Replaces: A176594 Gasket & O-Ring Kit fits: Cub, Cub (5.007" top O.D., 11.257" height, LoBo, Replaces: 354008R95, 360713R92 1-1/2"-16 thread size) USA made USA made NOTE: This Steiner NOTE: Includes (2) elements & (2) exclusive kit fits both early & gaskets. late touch control blocks. Some ABC4529 $59.99 applications may have extra O-rings / NEW! Hydraulic Filter fits: Case IH washers. 5120, 5130, 5140, 5220, 5230, 5240, 5250 IHS3020 $99.95 38 pc. Hydraulic Touch Control Block Replaces: 1976934C5, 47477558 Gasket & O-Ring Kit fits: Super A, C, (5.045" O.D. top, 7.875" height, 1-1/2"-16 Super C, 100, 130, 140, 200 thread size) USA made Replaces: 354007R96 USA made ABC4568 $119.99 NEW! Hydraulic Filter fits: Case IH NOTE: Includes (2) hydraulic head 7200 series, 8900 series, Magnum series gaskets (early Super A & C used the Replaces: 1971728C1, 277311A1 0.016" thick head gasket, all later used (4.770" top O.D., 14.240" height, the 0.028" thick head gasket). Fits all 1-3/4"-12 thread size) USA made hydraulic touch control blocks for NOTE: See website for all tractors listed. Inc.® applications. IHS706 $31.50 ABC4619 $54.99 NEW! Hydraulic Filter fits: Case IH Auxiliary Control Valve Boot fits: C, Magnum: 200, 220, 225, 240; Maxxum: Super A series, Super C, 100, 130, 140, 110 CVT, 120 CVT, 130 CVT, 135 MC, 200, Replaces: 356790R1 145 MC; Optum: 270, 300; Puma: 150, NOTE: Rubber. Case-IH
IH/Farmall 165 CVT, 170 CVT, Replaces: 87707947 (3.810" top O.D., 6.020" height, 1-3/8"-12 IHS3896 $64.50 Auxiliary Control Valve Hose Guard thread size) USA made Fits the following when equipped w/ Parts,auxiliary control valve: Farmall C, ABC4598 $69.99 NEW! Hydraulic Filter fits: Case Super C, 200, Replaces: 356834R12 IH Magnum 215, Magnum 245, (16-1/4" o/a length, 7" wide, (2) 1/4" Magnum 255, Magnum 275, Magnum O.D. & (4) 1/2" O.D. mounting holes) 305, Magnum 335, MX210, MX215, USA made NOTE: Mounts under the MX230, MX245, MX275, MX285, seat toolbox. Primer paint. MX305, MXM120, MXM130, MXM140, MXM155, MXU100, Replaces: 48142231 IHS3089 $6.39 Hydraulic Belly Pump Filler Pipe & Control Rod Dust Seal Spring fits: H, M
Chassis parts (3.810" top I.D., 9.490" height, 1-3/8"-12 thread size) USA made & Supers using hydraulic belly pump; Will also fit 404, 2404 as a hydraulic IHS3484 $44.95 Touch Control Hydraulic Filter Strainer, filter canister spring, Replaces: 15240E Filter Cartridge fits: Cub,Tractor Cub LoBoy USA made NOTE: 2 used per tractor Replaces: 351984R91, R92 (except 404 & 2404); Sold individually. (1.625" O.D., 1.490" I.D., 6.484" o/a length) NOTE: Does not fit 154, 184, 185. IHS3095 $5.99 Hydraulic Belly Pump Oil Outlet Elbow Dust Seal Spring fits: H, M & Supers IHS3491 $99.99 Touch Control Hydraulic Strainer w/ using hydraulic belly pump Gasket (Screen / Filter Cartridge) Replaces: 15164EA USA made fits: Super A, C, Super C, 100, 130, 140 NOTE: 3 used per tractor; Replaces: 355844R91, 350651R1 (gasket), Sold individually. 365014R91 (9.460" o/a length, 1.850" screen O.D., (x4) 1/4" bolt hole flange, IHS3091 $5.99 Hydraulic Belly Pump Filler Pipe & Steiner1.890" c.c. holes) NOTE: Has provision Control Rod Felt Washer fits: H, M & for touch control temp gauge & plug Supers using hydraulic belly pump for tractors w/out the gauge. Replaces: 15163E USA made NOTE: 2 used per tractor; IHS3537 $79.95 Touch Control Hydraulic Strainer w/ Sold individually. Gasket (Screen / Filter Cartridge) fits: F300, F350, F400, F450, (W400 IHS3098 $6.49 Hydraulic Belly Pump Oil Outlet Elbow & W450 both w/out factory power Felt Washer fits: H, M & Supers using steering), Replaces: 361435R91 (screen), hydraulic belly pump, Replaces: 15162E 361441R1 (gasket) (8.235" o/a length, USA made NOTE: 3 used per tractor; 2.400" O.D. screen) Sold individually.
374 STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm Hydraulic parts cont... PTO, belt pulley parts cont... Part # USD Description / Application Part # USD Description / Application IHS3104 $4.99 IHS009 $39.99 PTO Shift Collar w/ Set Screw Hydraulic Belly Pump Oil Outlet Elbow fits: Same as IHS007BK Metal Washer fits: H, M, Supers using Replaces: 351286R2 (collar), 223016 hydraulic belly pump, Replaces: Q3691 (set screw) (.817" spline I.D., 6 splines) USA made NOTE: 3 used per tractor; NOTE: Visit our website for additional Sold individually. application information. IHS010 $34.95 IHS3100 $4.99 PTO Shift Lever & Shaft fits: Same Hydraulic Belly Pump Filler Pipe & as IHS007BK, Replaces: 351970R31 Control Rod Metal Washer fits: H, M, (lever), 351287R1 (shaft) NOTE: Visit Supers using hydraulic belly pump our website for additional application Replaces: Q357 USA made NOTE: 3 information. used per tractor; Sold individually. IHS335 $8.19 DEC450 $9.79 PTO Shift Lever Guide fits: Same as Hydraulic Touch Handle Decal fits: 240, IHS007BK, Replaces: 351967R1 340, 460, 560, 660, Replaces: 369778R1, NOTE: Visit our website for additional 127741 (2" O.D.) USA made application information. NOTE: Vinyl cut w/ white letters. IHS178 $4.95 Inc.® PTO Bearing Retainer Gasket fits: Same IHS3473 $66.50 Fast Hitch & Remote Cylinder Seal Kit IH/Farmall
as IHS007BK, Replaces: 351258R3 IH/Farmall fits the following w/ 3-1/2" x 8" fast USA made NOTE: Visit our website Case-IH hitch or remote cylinders: 300, 330, 340, for additional application information. 350, 400, 450, 460, 560; Also used in remote cylinders for H - Super WD9 IHS180 $8.50 Transmission Case Rear Cover Plate Replaces: 363138R94 USA made Gasket (PTO Adapter Gasket) fits: Same NOTE: Measure cylinder housing as IHS007BK, Replaces: 350837R3 Chassis parts O.D. before ordering. Fits 3-1/2" x 8" Parts,USA made NOTE: Visit our website cylinders only. See website for IH for full applications. cylinder part numbers that fits this kit. IHS2327 $33.99 (Front) PTO Shaft Ball Bearing w/ Collar IHS2332 $29.99 IHS2327: fits: 154, 185 PTO, belt pulley parts (Rear) Replaces: 491590R91 Part # USD Description / Application IHS2332: fits: 154, 184, 185 IHS007BK $49.99 PTO Bearing Kit fits: Cub, Cub LoBoy, Replaces: 455960R91 (NOT 154, 184, 185); Also fits some Cub Cadets, Replaces: 126107C1, 369875R1, IHS2330 $24.99 69696D, 84330084 TractorNOTE: Kit includes seal, bearing, 2 snap rings. Visit our PTO Cam Bearing fits: 154, 185 website for additional application Replaces: 59769C91 information. IHS2945 $9.75 IHS2329 $164.50 PTO Clutch Output Shaft fits: 154, 185 PTO Output Shaft Bearing fits: Same as Replaces: 404917R11, 546651R11, IHS007BK, Replaces: ST225B, 84330084 (276574R91 bearings) (0.984" I.D., 2.047" O.D., 0.590" width) NOTE: Includes 2 needle bearings.
IHS2337 $87.99 ABC3392 $7.50 Rear PTO 'V' Belt Pulley fits: 154, Steiner 184, 185 when using following rotary PTO Output Shaft Seal fits: Same as mowers: 48", 60", 3142, 3160, 3160A, IHS007BK, Replaces: 45007D, 126107C1 3260, Replaces: 491881R2 (1.125" I.D., 1.875" O.D., 0.250" wide) (7 1/2" O.D., 5/8" belt width)
IHS2318 $9.89 IHS008 $69.99 PTO Shaft fits: Same as IHS007BK PTO Handle Grommet fits: 154, 185 Replaces: 351269R4, 368433R91 Replaces: 404929R1 (11-1/2" o/a length) NOTE: Visit our website for additional application information. PTO, belt pulley parts continue on next page
STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com 375 PTO, belt pulley parts cont... PTO, belt pulley parts cont... Part # USD Description / Application Part # USD Description / Application IHS2333 $89.99 IHS423 $64.99 PTO Shield fits: M SN: 59957 & up, MD, Super M, Replaces: 66424DAXA 4-pc. PTO Friction Discs fits: 154, 185 (11" o/a length) NOTE: IH 2150 red powder coat.
IHS2334 $19.95 IHS424 $64.99 PTO Shield (For Independent PTO) fits: MTA, 300, 330, 340, 350, 400, 450, 3-pc. PTO Separator Discs fits: 154, 185 460, 504, 560, 606, 660 USA made Replaces: 360181R91, 364712R21 (6" o/a length) NOTE: IH 2150 red powder coat. IHS2358 $23.95 4-pc. PTO & Belt Pulley Gasket Kit IHS2328 $102.75 fits: A, B, C, Supers, 100, 130, 140, 200, PTO Drive Clutch Cup (Drum) fits: 154, 230, 240, Replaces: 60581D, 63779D, 185, Replaces: 527240R1, 547292R1 60589DA, 47283DB USA made NOTE: Kit includes (1) PTO to rear end housing gasket, Inc.®(1) belt pulley cover IHS2335 $34.50 gasket, (1) belt pulley shaft bearing cage gasket, (1) PTO drive bearing cage 2-pc. PTO Clutch Load Spring Plates gasket. fits: 154, 185, Replaces: 527236R1 IHS2932 $259.99 PTO Brake Band w/ Lining fits: Super MTA, Super W6TA, 300, 330, 340, 350, 400, 450, (Some 460, 560, 660) (All w/ Case-IH IHS2331 $149.99 IH/Farmall PTO Clutch Rebuild Kit w/out planetary PTO), Replaces: 359059R91, Hardware fits: 154, 185 365763R91 (1.495" wide, 0.120" thick Replaces: 527245R92 Parts,lining) NOTE: 2 used per tractor; NOTE: Kit includes (4) friction discs, Sold individually. (3) separator plates, (8) wavy spring IHS776 $8.95 PTO Handle Knob fits: 544, 656, 664, washers, (4) shims. 666, 686, 706, 756, 766, 806, 826, 856, 966, IHS2326 $119.99 1026, 1066, 1206, 1256, 1456, 1466, 1468, 2-pc. PTO Pulley Shield (Guard) 1566, 1568, 4366, 4386, 4568, 4586, 4786; Assembly(For tractors equipped w/ Hydros: 70, 86, 100, Replaces: 387885R1 3160A mowers) fits: 154, 184, 185 (.475" hole I.D.) NOTE: For 06 series
Chassis parts (All w/ or w/out 3 pt. hitch) may also have to use small amount of Replaces: 132395C91, 492970R2 RTV sealer to secure to lever. IHS923 $6.95 IHS425 $69.50 Tractor Live PTO Pawl Operating Knob PTO Shield w/out Belt Pulley Gearbox fits: 300, 350, 400, 450, W400, W450 fits: A, B, C, Supers, 100, 130, 140, 200, (All w/ live PTO), Replaces: 359108R2 230, 240, Replaces: 55403DA USA made NOTE: Metal. NOTE: 9-3/4" o/a length including mounting bracket. IH 2150 red powder IHS978 $4.95 Live PTO Pawl Operating Knob coat. fits: 330, 340, 460, 560, 660 (All w/ IHS427 $64.99 planetary type PTO); Serviceable for PTO Shield w/ Belt Pulley Gearbox 300, 350, 400, 450, W400, W450 fits: A, B, C, Supers, 100, 130, 140, 200, Replaces: 359108R1 (.310" hole dia.) Steiner230, 240, Replaces: 55398DA NOTE: Rubber. NOTE: 9-3/4" o/a length including IHS770 $8.95 PTO Control Dust Boot fits: 544, 656, mounting bracket. Powder coat IH 666, 686, 706, 756, 766, 786, 806, 826, 856, 2150 red. 886, 966, 986, 1026, 1066, 1086, 1206, IHS426 $64.99 1256, 1456, 1466, 1468, 1486, 1566, 1568, PTO Shield fits: H SN: 118000 & up, 1586, 3388, 3588, 3788, 4366, 4386, 4568, Super H, Replaces: 66387DAXA 4586, 4786; Hydros: 70, 86, 100, 186 NOTE: Includes (13-5/8" o/a length) Replaces: 393071R2 NOTE: Also mounting bracket. IH 2150 red powder fits 766, 966, 1066, Hydro 100 as a coat. differential lock pedal boot.
376 STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm PTO, belt pulley parts cont... PTO, belt pulley parts cont... Part # USD Description / Application Part # USD Description / Application
MIS118 $64.99 PTO Over-Running Clutch PTO Seals cont... (1-1/8" Female) fits: Tractors up to 75 ABC1550 $16.99 PTO Shaft Seal fits: H SN: 118000 & up, horsepower, Replaces: Hub City C670F (M, MD, Supers SN: 59957 & up), Late (1-1/8" - 6 x 1-3/8", 6 spline) W4, W6, W9, Supers; B250, B275, B414; Also fits the following w/ transmission MIS138 $62.95 PTO Over-Running Clutch (1-3/8" driven PTO (Not Live): MTA, 300, 330, Female & Male) fits: Tractors up to 75 350, 354, 364, 384, 400, 424, 434, 444, 450, horsepower, Replaces: Hub City C660F 600, 650, 2300, 3414 (All w/ 1-3/8" PTO) (1-3/8" - 6 x 1-3/8", 6 spline) Replaces: 45702D, 3065217R91, 358772R91, 358812R91, 708580R91 PTO Bearings (1.375" I.D., 2.254" O.D., 0.312" wide) IHS2945 $9.75 Belt Pulley Pinion & Drive Shaft Bearing NOTE: Seal may be narrower then fits: Cub, Cub LoBoy original. 2 seals can be installed in the Replaces: ST225B, 84330084 older applications if needed. (0.984" I.D., 2.047" O.D., 0.590" width) ABC3362 $7.79 Belt Pulley Shaft Seal fits: M, MD both NOTE: 2 used per tractor; SN: 19203 & up, Supers, MTA, (Super Sold individually. W6, WD6), 400, 450, W400, W450, 560, ABC3437 $5.20 Belt Pulley Side Shaft Bearing fits: A, B, 660, Replaces:Inc.® 378673C91 C, Supers, 100, 130, 140, 200, 230, 240 (2.125" I.D., 2.879" O.D., 0.438" wide) IH/Farmall Replaces: ST213, 210064 IH/Farmall ABC2837 $10.95 Case-IH Front PTO Bearing Retainer Seal (1.181" I.D., 2.440" O.D., 0.629" wide) fits: MTA - 660 w/ Live planetary PTO NOTE: Bearing is not sealed. Replaces: 359056R91 ABC3437 $5.20 PTO Output Shaft Bearing fits: A, B, C, (1.500" I.D., 2.380" O.D., 0.315" wide) Supers, (H up to SN: 45613 w/ 1-1/8" ABC1543 $14.99 Live PTO Shaft Seal fits: Super MTA,
PTO) 100, 130, 140, 200, 230, 240 Chassis parts 300, 330, 340, 350, 400, 450, 460, 504, 560, Replaces: ST212, ST213, 210064 Parts, 606, 660, W400, W450; Also fits 404 as a (1.181" I.D., 2.440" O.D., 0.629" wide) transmission driven PTO seal NOTE: Bearing is not sealed. 2 used Replaces: 359051R91, 360436R91, per tractor; Sold individually. 364472R91, 364477R91 PTO Seals (1.375" I.D., 2.378" O.D., 0.312" wide) ABC1628 $15.79 ABC387 $8.99 PTO Output Shaft Seal fits the following Belt Pulley Output Shaft Seal fits: Cub, w/ single or dual speed PTO: 544, 656, Cub LoBoy, Replaces: 351276R91 666, 686, 706, 756, 766, 786, 806, 826, 856, (1.187" I.D., 2.004" O.D., 0.250" width) 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486; Hydros: IHS1545 $17.99 PTO Shaft Seal fits:Tractor A, B, C, Supers, 100, 70, 86, 186; Fits the following w/ dual 130, 140, 200, 230, 240 speed PTO only: 3088, 3288, 3388, Replaces: 48114D, 71719C1 3488, 3588, 3688, 3788, 5088, 5288, 5488, (1.375" I.D., 2.506" O.D., 0.311" wide) 6388, 6588, 6788, Replaces: 381480R91, 534917R91 (1.375" I.D., 2.000" O.D., ABC2008 $13.65 0.337" wide) Flat Belt Pulley Shaft Seal fits: A, B, C, Supers, 100, 130, 140, 200, 230, 240 MFS1351 $13.79 Independent PTO Drive Shaft Seal Replaces: 43308D, 48954D, 71700C1 (For Independent PTO Drive Gear & (1.375" I.D., 2.110" O.D., 0.315" wide) Shaft) fits: 300, 330, 340, 350, 460, 504, 544, 606, 656, 666, 686 ABC3392 $7.50 Replaces: 362119R93, 363514R93 SteinerPTO Output Shaft Seal fits: H up to SN (1.750" I.D., 2.690" O.D., .500" wide) 45613 (w/ 1-1/8" PTO) Replaces: 45007D, 126107C1 ABC3749 $2.25 Single or Dual Speed PTO Clutch Piston (1.125" I.D., 1.875" O.D., 0.250" wide) O-ring fits: 544, 656, 664, 666, 686, 706, 756, 766, 786, 806, 826, 856, 886, 966, ABC4449 $9.99 NEW! PTO Shaft Seal fits: H SN: 45614 986, 1026, 1066, 1086, 1206, 1256, 1456, - 117999, O6 up to SN: 7027, W6, (WD6 1466, 1468, 1486, 1566, 1586, 3088 - 7488, up to SN: 7034), (W9, WD9 both up to Hydros 70, 86, 100, 186 (1 used) SN: 14400), Replaces: 71910C1 Replaces: 129963, 558636R1, 70228R1 (1.575" I.D., 2.505" O.D., 0.377" width) (1.850" I.D., 2.270" O.D., 0.210" thick)
STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com 377 Front wheel hardware Front wheel hardware cont... NOTE: Sold individually. Part # USD Description / Application Part # USD Description / Application ABC253 $18.99 Wheel Clamp Lock Nut (For Axle Shaft IHS839 $3.95 Front Wheel Lug Bolt fits: Cub, Cub & Front Wheel) fits: A, B, BN, C, 100, 130, LoBoy, Replaces: 351846R1 200, 230, 240, 330, 340, 404, (424, 444 both (7/16" - 20 NF x 3/4", 5/8" thread length) w/ standard axle), F504 Row-Crop USA made NOTE: Dot on head like (5/8"-18 thread) NOTE: No re-threading original. 5 used per rim. necessary on worn shafts. Check size IHS1617 $5.99 Front Wheel Bolt w/ Nut & Lock Washer before ordering. fits: A, Super A, B, BN, C, Super C, 100, 130, 200, 230, Replaces: 351555R1, R2 (1/2" -13 UNC, 2-1/2" long, square head) NOTE: Fits tractors w/ CLAMP style rim only. Does not fit loop style rims. 3 Front wheel seals, retainers used per side; Sold individually, Use w/ NOTE: Sold individually. IHS212 clamp. Part # USD Description / Application IHS777 $5.99 Front Wheel Bolt w/ Nut (For Loop Style IHS1162 $5.50 Rim only) fits: Late H, Super H, Late M, Late MD, Super M, Super MD, MTA, 300, Front Wheel Felt Seal fits: Cub, Cub 350, 400, 450 (All w/ adjustable thread LoBoy, Replaces: 350768R1Inc.® front wheels), Replaces: 181783 (bolt), (1.627" I.D., 2.216" O.D., 0.164" wide) 352777R1 (nut) (5/8"-18 NF, 2-11/16" USA made length, 15/16" hex head) NOTE: Bolts front wheel to hub. Will not fit early IHS3427 $23.50 clamp style rim. 3 used per side. Front Wheel Bearing Oil Seal fits: Cub, Case-IH
IH/Farmall IHS2423 $6.99 Front Wheel Bolt w/ Nut fits: W9, WD9 Cub LoBoy, Replaces: 350769R91 series, Supers, 600, 650, 660 (1.495" I.D., 2.205" O.D., 0.488" wide) Replaces: 351220R1, 13416R1 Parts,NOTE: Steel & NBR rubber. 2 used per (3.116" o/a length, 1/2"-20NF; Square tractor; Sold individually. head) NOTE: 5 or more used per rim. ABC397 $3.99 Front Wheel Lug Bolt fits: Late 140, 240, IHS1181 $5.99 Front Wheel Felt Seal fits: A, C, Super C 300 Utility, 330, 340, 350 Utility, B-250, (w/ adjustable wide front); Super A, A-1, B-275, B-414, 354, 364, 384, 404, 2404, 424, AV, Super AV, AV-1; 100, 130, 140 (if using 2424, 444, 2444, 460, 504, 544, 560, 606, 656, felt seal); 200, 230 (All w/ special wide 660, 664, 666, 686, 706, 756, 766, 786, 806, front), Replaces: 49118DA 826, 856, 886, 966, 986, 1026, 1066, 1086, Chassis parts (1.806" I.D., 2.574" O.D., 0.166" wide) 1206, 1256, 1466, 1468, 1566, 1568, 1586, USA made 3088, 3288, 3688; Hydros: 70, 86, 100, 186 IHS1170 $5.99 Replaces: 51485D (9/16"Tractor x 18 NF, 1-1/8" thread length, 7/8" hex head) USA made Front Wheel Felt Seal fits: B, BN (w/ NOTE: 6 to 8 used per rim; double front wheel), C, Super C, 200, 230 Sold individually. (tricycle only), Replaces: 55453D ABC268 $2.99 Front Wheel Stud fits the following w/ (1.688" I.D., 2.539" O.D., 0.345" wide) out FWA or w/out cast swept back axle: 385, 395, 454, 474, 484, 485, 495, 574, 584, IHS3877 $10.95 585, 595, 595XL, 674, 684, 685, 685XL, 695, 695XL, 784, 884, 885, 885XL, 895, 895XL, Front Wheel Bearing Oil Seal fits: A, B, C, 995; Case IH C50, C60, C80, C90, C100, Supers, 100, 130, (140 w/ 3 loop rim), 200, 3220, 3230, 4210, 4230, 4240 230, Replaces: 43463D SteinerReplaces: 453762R1, 453769R1, 528803R1 (1.560" I.D., 2.562" O.D., .497" wide) (1/2" - 20 NF x 1-3/4" w/ serrated shoulder, 1.747" useable length) IHS3814 $5.99 NOTE: 6 used per rim; Sold individually. Front Hub Felt Seal fits: H, M, MD, MTA, IHS212 $10.99 Front Wheel / Rim Clamp fits: A, B, C, Supers, I, O, W4, 6, Supers, 300, 350, 400, H, M, MD & some Supers, I, O, W4, 6, 9 W400, 450, W450 (All w/ felt front hub series, W400, W450, some 100, 130, some seals), Replaces: 43828D, 48702D, 50259D 200, 230, 600, 650, 660, Replaces: 48976DA (2.250" I.D., 3.230" O.D., 0.180" wide) (.540" dia. hole) NOTE: Sold individually. USA made NOTE: F1 felt.
378 STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm Front wheel seals, retainers cont... Front hub, parts cont... Part # USD Description / Application Part # USD Description / Application
IHS1361 $9.99 Front Wheel Bearing Seal fits: B250 up to IHS3412 $58.75 Front Wheel Bearing Kit fits: Cub, Cub SN: 20101, B275, B414, H, Super H, F300, LoBoy NOTE: 2 used per tractor; F350, (I300, I350 both w/ adjustable axle Sold individually. Oil seal not included; only); M - MTA (All w/ IH adjustable order IHS3427 seal. wide front); 354, 364; I404, 424, 444 (All w/ heavy duty axle); 434, F460, (I460, I504 IHS1797 $36.95 Front Wheel Bearing Kit fits: A, B, C, both w/ standard axle), F544, (I544, 606 Supers; 100, 130, (140 w/ 3 loop rim), 200, both w/ standard axle), 656, 2300A, (2424, 230, Replaces: 360119R92 NOTE: 2 used 2444 both w/ heavy duty axle), 2500 per tractor; Sold individually. Replaces: 48539D,DA, 358778R1, IHS3669 $32.99 368587R1, 704083R91 (1.750" I.D., 2.786" Front Wheel Bearing Kit fits: H, Super O.D., 0.294" wide) H, (I4 w/ 3 spoke front hub), O4, OS4, W4, Super W4, (I300, I350 Utilities IHS1362 $22.45 Front Wheel Bearing Seal fits: M - MTA w/ adjustable front axle), F300, F350, (All w/ narrow front end); I6, O6 - WD6, Serviceable for 361294R93 400, 450, W400, W450; I300, 330, 340, 460, (Inner Bearing: 1.37" I.D., 2.71" O.D.; 504 (All w/ heavy duty axle) Outer Bearing: 0.93" I.D., 2.23" O.D.; Replaces: 48704D,DA, 358779R91, NOTE: 2 used 358818R91, 367161R91, 372475R91, Seal: 1.74" I.D., 2.83" O.D.) 704108R91, 708108R1 (2.063" I.D., 3.250" per tractor; SoldInc.® individually. O.D., .294" wide) IHS3855 $22.99 Front Wheel Bearing Kit fits 6 lug front IH/Farmall hubs w/ casting numbers 370289R1, IH/Farmall
IHS3658 $10.75 Front Wheel Seal Retainer (Wear Sleeve) Case-IH fits: A, B, BN, C, Supers, 100, 130, 140, 200, 368289R1, 368626R1, 386080R1: 140, F240, 230, 240; some 330, 340, F404, 424, 444, I240, 330, (F340 w/ standard (std.) axle), 2424, 2444, F504 using STD front axle I340 w/ std. axle, F404, I404, (424 w/ std. Replaces: 49117D (2.560" I.D., 2.628" O.D., axle), 444 w/ std. axle, F504; Industrials: 0.842" wide) NOTE: 2 used per tractor; 2404, (2424 w/ std. axle), 2444 w/ std. Sold individually. Measure O.D. before axle, Replaces: 375128R91 (.749" I.D. outer Chassis parts ordering. See website for all Parts,bearing, 1.245" I.D. inner bearing, 1.785" applications. O.D. outer race, 2.328" O.D. inner race) NOTE: Verify front hub before ordering. IHS3655 $9.99 Front Wheel Seal Retainer (Wear Sleeve) IHS3859 $24.99 fits: B250, B275, B414, H, Super H, I4, O4, Front Wheel Bearing Kit fits the following W4, Supers; F300, F350, (I300, I350 w/ using front hub 369141R1, 369858R1, STD axle), 354, 364, 384, 434, F460, F544 386088R1, 395310R1, 397092R1, 399468R1: Replaces: 48548D (2.805" I.D., 2.910" O.D., 424, 444 both w/ H.D. axle, F460 except 0.880" wide) NOTE: 2 used per tractor; Hi-Clear, (I460, I504, F544, I544, 606 w/ Sold individually. Measure before standard (std.) axle), F656 Tricycle, (F656 ordering. See website for all wide front up to SN: 41971), I656 up to applications. SN: 13199 w/ std. axle; Industrials: (2424, Tractor 2444, 2504, 2544, 2606 w/ std. axle), 2656 IHS3660 $10.75 Front Wheel Seal Retainer (Wear Sleeve) up to SN: 13199, Replaces: 371417R92 fits: M, MD, Supers, (MTA w/ narrow (.842" I.D. outer bearing, 1.375" I.D. inner front end & 6378DC front hub), O6, OS6, bearing, 1.975" O.D. outer race, 2.567" ODS6, W6, WD6 & Supers, 400, 450, 560, O.D. inner race) NOTE: Verify front hub 660, (666, 686, Hydro 70, Hydro 86 w/ before ordering. adjustable wide front), 664, (706 - 5488 IHS3137 $58.95 series), Replaces: 48703D (3.260" I.D., Front 6-Lug Hub fits: 560, 664, 666, 686, 3.370" O.D., 0.915" wide) NOTE: 2 used 706, 756, 766, 786, 806, 826, 856, 886, 966, per tractor; Sold individually. Measure 986, 1026, 1066, 1086, 1206, 1256, 1456, O.D. before ordering. See website for all 1466, 1468, 1486, 1566, 1568, 1586; Some Steinerapplications. 3088 - 5488 (All using 6 lug hub) Replaces: 370256R11, 370256R21, 391823R11 NOTE: See website for Front hub, parts additional applications. IHS3140 $34.95 Part # USD Description / Application Front Wheel Bearing Kit w/ Seal fits: Same as IHS3137 IHS2338 $7.99 Replaces: 371418R92 (1.780" inner race Front Hub Cap fits: 154, 184, 185 I. D., 1.375" outer race I.D.) NOTE: See Replaces: 404835R1 USA made website for additional applications. Front hub, parts continue on next page
STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com 379 Front hub, parts cont... Front wheels / rims cont... Part # USD Description / Application Part # USD Description / Application
ABC4383 $7.99 NEW! Front Wheel Oil Seal fits: 460, 504, IHS193 $69.99 Front Wheel (Blank Center) fits: Some F12, 544, 560, 606, 656, 666, 686, 706, 756, 766, F14 when equipped w/ 16" blank rim; F20 786, 806, 826, 856, 886, 966, 986, 1026, but 1/2" narrower, H, M, MD, W4, I4, O4, 1066, 1086, 1206, 1256, 1456, 1466, 1468, W6, I6, ID6, O6, WD6, Replaces: 354223R1, 1486, 1566, 1568, 1586, 3088, 3288, 3688, 354244R91 (4.25" x 16"; 13.430" I.D.) 5088, 5288, 5488, Hydro 70, 84, 100, 186 USA made NOTE: Use w/ 13.430" dia. Replaces: 370254R91, 44995098 center dish. Silver Powder Coat Paint. For 5.50 - 6.50 x 16" tires. WHS033 $87.99 Front Wheel (3 Welded Lugs) fits the following w/ front hub 8734D or 9350D only using 3 loop style rims held on by 3 bolts, not clamps: Some A, B, C, Supers, 100, 130, Early 140, 200, 230, Serviceable for 57095D (3" x 15") NOTE: Does not have original look. Check your rim type before ordering as rim may have been switched What is back spacing? from the original using 3 loop style rim. Will not fit tractors w/ IHS212 clamps. To determine back spacing lay your wheel flat Inc.® Cannot be used w/ IHS327 weights. For on the ground with the back of the wheel facing up. 4.00 x 15" - 5.50 x 15" tires. Lay a straight edge across the wheel & measure the WHS019 $74.99 distance from the back side of the mounting surface to the straight edge. (I.E. The wheel pictured has a back Front Wheel (6 Lug) fits: Late 140, F240, F340, F404, F504, Replaces: 370604R91
Case-IH spacing of 3-5/8"). (3" x 15", 4-5/8" pilot hole, 3" bolt on c.c., IH/Farmall 3-1/4" back spacing) USA made Parts,NOTE: For 4.00 x 15" - 5.50 x 15" tires. Front wheels / rims WHS042 $79.99 NOTE: To determine the width of Wheels / Rims: Measure the Front Wheel (6 Lug) w/ (4) Wheel Weight inside (bead to bead) not outside to outside. See page 392B. Holes fits: Some 544 - 3688, others
Part # USD Description / Application Replaces: 371735R3 (6" x 15", 4.625" pilot hole, 6" bolt circle, 4-3/4" back spacing) WHS020 $79.95 Front Wheel (5 lug) w/ Wheel Weight USA made NOTE: For 6.00, 7.50 x 15" tires.
Chassis parts Holes fits: Cub, Cub LoBoy, Some Cub LoBoy 154, 184, 185 when equipped w/ WHS022 $76.50 Front Wheel (6 Lug) w/ (4) Wheel Weight a 5 lug 3" x 12" rim, Replaces: 351074R91, Holes fits: Some 140 - 1456 385651A1 (3" x 12") NOTE:Tractor For 4.00-5.50 x Replaces: 380065R91, 704675R91 12" tires. (4.5" x 16", 4.625" pilot hole, 6" bolt circle, IHS195 $52.95 4" back spacing) USA made Front Wheel (Blank Center) fits: A, B used NOTE: For 5.50, 6.00 x 16" tires. w/ Hub 6787D, BN, C (All using IHS212 clamps); F12, F14 both using cast hub WHS043 $84.50 Front Wheel (6 Lug) w/ (4) Wheel Weight 6787D only w/ original clamps Holes fits: Some 385 - 3688 Replaces: 31453D, 351556R92 Replaces: 364343R92 (6" x 16", 4.625" pilot (3" x 15") USA made NOTE: Silver Powder hole, 6" bolt circle, 4-3/4" back spacing) Coat Paint. Use w/ 13.214" dia. center dish. USA made NOTE: For 6.50 - 7.50 x 16" SteinerFor 4.00 -5.50 x 15" tires. tires. FDS071 $59.99 WHS070 $89.99 Front Wheel (6 Lug) w/ (4) Wheel Weight Front Wheel (Blank Center) fits: Farmall Holes fits: Some 385 - 3688 & others AV (3" x 19"; 17-3/8" I.D.) USA made Replaces: 486101R1, 528687R1 NOTE: Remove tabs from old rim & weld (8" x 15", 4.625" pilot hole, 6" bolt circle, into new blank rim. For 4.00 x 19" tires. 4-3/4" back spacing) USA made NOTE: For 7.50 - 9.5L x 15" tires.
380 STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm Front wheel weight, hardware Front weight brackets, parts Part # USD Description / Application Part # USD Description / Application IHS331 $149.99 Front Wheel Weight Set fits the following IHS3317 $199.99 Front Hang-On Weight Bracket fits: 385, when using 3" x 12" 5 lug front rim 404, 424, 444, 454, 460, 464, 484, 504, 544, 351074R91 w/ wheel weight holes: 560, 574, 584, 656, 660, 664, 666, 674, 684, Farmall Cub, Cub LoBoy; Some 154, 184, 686, 706, 756, 784, 806, 826, 856, 884, 1026, 185, Replaces: 351371R1 (Primer paint) 1206, 1256, 1456, 2400, 2500, Hydro 70, NOTE: Set includes (2) weights, Hydro 84, Hydro 86; will also fit 766 thru approximately 28 lbs. ea. piece. 1568 by using (2) IHS3322 spacers IHS957 $1.99 Front Weight Carriage Bolt, Washer & Nut Replaces: 383389R11, R21 (10 hole bracket, Kit fits: Cub, Cub LoBoy, Some 154, 184, 16" c.c. bolt holes, 23-3/8" o/a length) 185 (All using 351074R91 Front Rim) USA made NOTE: For 74 series utility Replaces: 15056R1, 18708R1, 433828, 88630 applications, must have existing 66253C1 (bolt); 102637, 280431 (nut); 103323, 80679 bumper weight to bolt this to. (washer) (1/2" dia., Grade 5 bolt) IHS3322 $69.99 Front Weight Bracket Spacer fits: 766, 966, NOTE: Zinc finish. 4 used per rim; 1066, 1466, 1468, 1566, 1568, Hydro 100 Sold individually. Replaces: 536041R1 (8-1/16" o/a length) NOTE: 2 used per tractor; Sold individually. IHS3330 $36.50 Front Weight Locking Cam fits: 274, 284, From a satisfied customer! 385, 484 - 884, 544,Inc.® 664, 656, 666, 686, 766 - 1568, 786 - 1586, 3088 - 3688, 5088, 5288, IH/Farmall 5488; Hydro: 70, 84, 100, 186, Replaces: IH/Farmall “You are on my speed dial! What does that Case IH 536044R1, 74202C1 (3-1/2" o/a length) tell you? Thanks alot!” - Don S. NOTE: 2 used per tractor; Sold individually.
Tires, tubes Chassis parts Tubes are for BIAS ply tires only, not for radialParts, tires. Also not for recreational use. Need a tire or tube that is not listed? Call our technical service department. Tires, tubes, valves, nut are sold individually.
Part # Price Description / Size Front tires - Licensed by ® WHS057 $59.00 Triple rib, Tire only (4.00 x 12") Firestone USA made WHS3697 $59.95 Triple rib, Tire only (4.50 x 12") Part # Price Description / Size WHS051 $17.99 Tube only (For 4.00 x 12", 4.80 x 12" Tires) WHS054 $149.99 Triple rib, 4 ply, Tire only (5.00 x 15") WHS052 $89.99 Triple rib, 6 ply Tire only (For 3" x 15" Wheel) (5.00 x 15") Tractor WHS055 $176.75 Triple rib, 6 ply, WHS053 $15.99 Tube only (For 4.00, 5.00, 5.50 x 15" Tires) Tire only (6.00 x 16") WHS047 $96.95 Triple rib, 6 ply Tire only (5.50 x 16") WHS056 $309.99 Triple rib, 6 ply, WHS048 $104.95 Triple rib, 4 ply Tire only (6.00 x 16") Tire only (7.50 x 18") WHS049 $115.50 Triple rib, 6 ply, Tire only (6.50 x 16") WHS050 $16.99 Tube only (For 5.50, 6.00, 6.50 x 16" Tires) FDS089 $72.50 Multi rib, 4 ply, Tire only (4.00 x 19") FDS056TU $16.99 Tube only (For FDS056TI & FDS089 Tire) (4.00 x 19") WHS060Steiner $39.99 Rear Tube only (For 7.50, 8.3, 9.5 x 24" Tires) WHS059 $54.99 Rear Tube only (For 11.2, 12.4 x 24" Tires) WHS058 $57.99 Rear Tube only (For 11.2, 12.4 x 28" Tires) WHS061 $85.00 Rear Tube only (For 13.6, 14.9 x 28" Tires) WHS062 $62.50 Rear Tube only (For 9.5 x 32" Tires) WHS063 $68.99 Rear Tube only (For 11.2, 12.4 x 34" & 36" Tires) WHS064 $67.50 Rear Tube only (For 11.2, 12.4 x 38" Tires) WHS2513 $92.99 Rear Tube only (For 12.00, 13.00, 13.6, 14.00, 14.9, 15.5 x 38" Tires) FDS056TI, WHS054, WHS055, WHS056 Firestone detail
STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com 381 Inner tube valves, nut Rear rim hardware cont... NOTE: Sold individually. Part # USD Description / Application Part # USD Description / Application IHS877 $10.99 Rear Wheel to Rim Bolt fits: H, M & ABC531 $5.99 Rear Tire Inner Tube Valve (Air / Water Supers, O, W, 4, 6, 9 series, (F300 up to Valve) (New Style) fits: Tractor tubes w/ SN: 3726), (F400 up to SN: 5180) Internal threads Replaces: 48985DA, 13491R1 ABC384 $10.69 Rear Tire Inner Tube Valve (Air / Water (Square head; 5/8-11" NC x 4-1/4" long) Valve) (Old Style) fits: Tractor tubes w/ NOTE: 6 required per rim. External threads IHS975 $11.99 Rear Rim to Center Bolt fits: I-240, (F300 ABC385 $1.79 SN: 3727 & up), I-330, F340, F350, (F400 SN: 5181 & up), F450, F460, (F504 using Brass Nut (For Rear Tire Inner Tube Valve) wheel 363014R1), F560 w/ 15.5 x 38" tires; Fits the following w/ wheel 388336R1: (656 Hi clear), 666, 686, Hydro 70, Hydro 86, Replaces: 363017R1 (5/8" dia. NF x 2-1/4" long) USA made NOTE: Measure Rear axle hub length prior to ordering. 4 to 6 used per Fits: 240, 404 Utilities rim. If you need the nut order FDS1211. Replaces: 369388R1 USA made MIS062 $3.99 Rear Rim Bolt AssemblyInc.® w/ Nut fits: 24" Description Part # Price Farmall A - 240 stamped dish except Cub Rear Axle Hub...... IHS151...... $299.95 (5/8 x 11 x 4-1/2" NC hex head w/ NOTE: 22 splines. washer) NOTE: 4 required per rim.
MIS063 $4.99 Rear Rim Bolt Assembly w/ Nut
Case IH (For tractors w/ stamped steel center
IH/Farmall Rear rim hardware dishes) Fits: 24 & 28" Rear Rims - NOTE: Sold individually. WHS001, WHS002, WHS004, WHS012, Part # Price Description / Application Parts,WHS013, WHS016 applications (5/8 x 18 NF x 2-1/2" Carriage bolt) ABC399 $2.95 Rear Rim Lug Bolt Fits: Cub, Cub LoBoy, USA made NOTE: 4 to 6 used per rim. 154, 184, 185, Replaces: 351079R1 (1/2" - 20 NF, 1" thread length, 13/16" hex MIS121 $0.89 Flat Washer only (For MIS063) head) NOTE: 5 used per rim. (5/8" I.D.) NOTE: 4 to 6 used per rim. IHS822 $5.99 Rear Rim to Center Nut & Bolt fits: Cub, Cub LoBoy w/ original rim, IHS032 $72.50 Rear Wheel Clamp fits: H & Supers (Will not fit aftermarket rim WHS003) Chassis parts (All w/ pneumatic tires, not steel wheels); Replaces: 351085R1 Early 300 w/ 6194D rear wheel (1/2" - 20 NF x 1-3/4" long (3/4" wide Replaces: 6192DBX NOTE: Fits 2-1/2" dia. head)) NOTE: 4 requiredTractor per rim. axle. IHS2423 $6.99 Rear Rim to Center Nut & Bolt fits: Cub, Cub LoBoy w/ WHS003 aftermarket rims only (3.116" o/a length, 1/2"-20NF; Rear rims / wheels - USA made Square head) NOTE: 4 required per rim. NOTE: To determine the width of Rims / Wheels: Measure the IHS839 $3.95 Rear Wheel Lug Bolt fits: Lawn & Garden; inside (bead to bead) not outside to outside. See page 392B. Cub Cadet 70 - 1650, Replaces: 351846R1 Part # Price Description / Application (7/16" - 20 NF x 3/4", 5/8" thread length) WHS003 $159.99 USA made NOTE: Dot on head like original. 5 used per rim. Rear Rim (4 Loops) fits: Cub ABC397 $3.99SteinerRear Rim Lug Bolt fits LH side: A, Super Replaces: 351428R91 A, B, BN, 100, 130, 140 (All w/ stamped (7" x 24", 14-1/2" c.c. loops) steel dish); Fits LH & RH side on the following utility tractors: B-250, 240, B-275, 300, 330, 340, 350, 354, 364, 384, 404, WHS001 $139.99 Rear Rim (4 Loops) fits: Some A, B, BN, B414, 424, 444, 454, 460, 464, 484, 574, 584, Super A, 100, 130, 140, 240, etc. 606, 674, 684, 784, Replaces: 51485D Replaces: 51281DB, 354873R92 (9/16" x 18 NF, 1-1/8" thread length, 7/8" (8" x 24", 14" c.c. loops) USA made NOTE: 5 to 8 used hex head) NOTE: Uses 5/8" bolts. per rim; Sold individually.
382 STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm Rear rims / wheels - USA made cont... Rear rims / wheels - USA made cont... Part # Price Description / Application Part # Price Description / Application WHS002 $154.95 Rear Rim (4 Loops) Fits: Some A, B, BN, WHS018 $315.00 Rear Rim (Deep Drop Center) Super A, 100, 130, 140, 240, I404, etc. fits: Some H, M, Supers, MTA, Replaces: 56206DA, 354876R91, Early 300 up to SN: 3726, Early 374807R91 (10" x 24", 14" c.c. loops) 400 up to SN: 5180 NOTE: Use 5/8" bolts. WHS002 - Valve Replaces: 55564D stem hole is on side closest to loops. (11" x 38") NOTE: Rims have 34" dia. center hole for cast centers WHS025 $229.99 Rear Rim (6 Clamps) & includes stop block. fits: Farmall C, Super C, 200, 230, 240, 404; Serviceable for AV, WHS021 $373.95 Rear Rim (Deep Drop Center) Super AV, Replaces: 352806R91 fits: Some H, M, Supers, MTA, (9" x 36) NOTE: For AV & Super Early 300 up to SN: 3726, Early AV, Rim will bolt on but the 400 up to SN: 5180 clamps on our rim are more (14" x 38") NOTE: Rims have 34" centered then the original dia. center hole for cast centers (original rim clamps at outer & includes stop block. edge). WHS1613 $279.99 Flat Base Rear Rim (Blank WHS016 $154.99 Center) (For Inc.®stamped steel 9 bolt pattern rims) fits: IH models IH/Farmall Rear Rim (6 Loops) fits: Some I240 - I404 (10" x 38") NOTE: Bare finish. IH/Farmall Replaces: 703928R91 (9" x 28") Customer must reuse old center. Case IH Must weld or rivet.
WHS036 $309.95 WHS004 $175.50 Rear Rim (Double-Bevel)
fits: Some F340, 574 Row-Crop, Chassis parts Parts,others, Replaces: 372319R2 Rear Rim (6 Loops) fits: I300 etc. (12" x 36") NOTE: WHS036 has 8 Replaces: 361700R91 (10" x 28") drive lugs.
WHS035 $329.99 Rear Rim (Double-Bevel) WHS012 $179.95 fits: Some F300 SN: 3727 & up, F340, F350, (F400 SN: 5181 & up), F450, F460, F504, F544, F656, Rear Rim (6 Loops) fits: Some I300 - 606 others, Replaces: 363145R1 Replaces: 707703R91 (11" x 28") (10" x 38") NOTE: Has 18 drive Tractor lugs. WHS037 $329.99 Rear Rim (Double-Bevel) WHS013 $249.50 fits: Some F300 SN: 3727 & up - 856, others, Replaces: 363023R1, Rear Rim (6 Loops) fits: Some B250 - 884 383691R1 Replaces: 363988R91 (12" x 28") (12" x 38") NOTE: Has 18 drive NOTE: Back spacing on loops = 3-1/2" lugs. & 7-3/4". WHS024 $319.99 Rear Rim (Double-Bevel) fits: Some F300 SN: 3727 & up - WHS029Steiner $279.95 Rear Rim (Deep Drop Center) 3688, others, Replaces: 365946R2, fits: Some H, M, Supers, MTA, 380869R1 Early 300 up to SN: 3726, Early (14" x 38") NOTE: Has 18 drive 400 up to SN: 5180 lugs. Replaces: 55563D (10" x 38") NOTE: 34" dia. WHS046 $63.99 center hole for cast center dish. Reinforcing Ring (For 9 bolt pattern rim) WHS029 does not include stop NOTE: Repairs existing 9 bolt rim. block, must reuse old stop block or fabricate new one.
STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com 383 Rear wheel weight set, hardware cont... Rear spinout rims, parts Part # Price Description / Application NOTE: Stop holes are angled. IHS959 $2.99 Rear Wheel Weight Carriage Bolt Washer & Nut Kit fits: Cub, some Cub LoBoy 154, 184, 185 , Replaces: 15144R1, Part # Price Description / Application 18710R1, 433848 (bolt); 102637, 280431 ACS027 $489.99 Rear Spinout Rim (4 Rails) fits: Some IH (nut); 80679, 103323 (washer) (1/2" x 3" 240, 404, Replaces: 371561R91 Grade 5 bolt) NOTE: 4 used per rim; (10" x 24") USA made Sold individually. ACS028 $494.95 Rear Spinout Rim (4 Rails) fits: Some I300 & up, Replaces: 373300R91 (11" x 28") USA made 3-point hitch parts ACS026 $494.50 Rear Spinout Rim (4 Rails) fits: Some I240 - 884, Replaces: 365324R92 Part # Price Description / Application (12" x 28") USA made IHS830 $16.99 Crank Arm (For Fasthitch or 3-Point WHS008 $504.95 Rear Spinout Rim (4 Rails) fits: Some Conversion Lift Arm Screw) fits: 230, 300, IH300 - 884 (13" x 28") USA made 330, 340, 350, 400, 404, 450, 460, 504, 544, NOTE: Stop holes are angled. Rails are 560, 606, 656, 664, 666, 686, 706, 756, 766, drilled for both style stops (1 rail for 806, 826, 856, 966, 1026, 1066, 1206, 1256, MIS109 & 1 rail for MIS108). 1456, 1466, 1468, 1566,Inc.® 1568; Hydros: 70, 86, 100, Replaces: 523861R2 ABC3865 $14.95 1-Bolt Spin-out Rim Clamp (Bridle) IHS051 $97.50 fits: 385, 484, 485, 584, 585, I656, 664, 3-pt. Leveling Screw Housing 684, 784, 884, H84, 2656 (All using 1 bolt fits: Late 706, 756, 766, late 806, 826, 856, spin-out rim clamps) 966, 1026, Hydro 100 Replaces: 399004R1, 83954711 Replaces: 396752R1, 396752R1GV Case IH (16-1/2" long, 1-1/8" Acme threads, IH/Farmall (3.860" o/a height, 3.353" o/a width, .935" hole dia.) Category 2) MIS109 $15.85 Rear Spinout Rim Stop (For Parallel IHS1624Parts, $15.65 Lower 3-Point Link Latch Spring fits the Drilled Rim Rail) fits: IH / Farmall following w/ a Category II 3-point hitch: models, Replaces: 365327R2 NOTE: Use 504, 544, 606, 656, 664, 666, 686; Hydros: MIS109 for our spinout rims. 70, 86, Replaces: 380992R1, 392882R1 (.075" thick, 5.896" long, .325" hole dia., MIS108 $17.99 Rear Spinout Rim Stop (For 90 degree .200 to .755 wide) USA made Drilled Rim Rail) fits: IH / Farmall FDS023 $24.99 Top-Link (Category 1) models USA made NOTE: Will not fit Adjustable w/ forged ends & 3/4" hole the rims that we sell. Chassis parts fits: IH/Farmall models MIS110 $9.85 Stop Bolt (For Rear Spinout Rim Stops) (16" tube length) Replaces: 365326R1 (2-5/8"Tractor o/a length) FDS346 $41.55 Top-Link (Category 2) NOTE: Sold individually. Adjustable w/ forged ends & 1" hole fits: IH/Farmall models (16-3/4" tube length)
ABC4185 $2.49 Rear wheel weight set, hardware Top-Link (Category 2), Part # Price Description / Application Adjustable w/ forged ends & 1" hole IHS331 $149.99 fits: IH/Farmall models Rear Wheel Weight Set fits: Yellow / (16-3/4" tube length) White Cub Cadet Lawn Mower not red ABC1431 $2.49 tractors, Replaces: 351371R1 3-Point Top Link Pin (Category 1) Steiner(Primer paint) NOTE: Set includes (3/4" O.D., 2-3/4" usable length, (2) weights, approximately 28 lbs. ea. 4-5/8" o/a length) piece. ABC1427 $3.99 3-Point Top Link Pin (Category 1) IHS957 $1.99 Rear Wheel Weight Carriage Bolt (3/4" O.D., 4-3/4" usable length, Washer & Nut Kit fits: Yellow / White 6-1/2" o/a length) Cub Cadet Lawn Mower not red tractors ABC1429 $4.99 Replaces: 351371R1 (1/2" dia., Grade 5 3-Point Top Link Pin (Category 2) bolt) NOTE: Zinc finish. 4 used per rim; (1" O.D., 4-1/4" usable length, Sold individually. 6" o/a length)
384 STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm 3-point hitch parts cont... Drawbars, parts cont... Part # Price Description / Application Part # Price Description / Application MIS119 $1.09 3-Point Lynch Pin fits: IH/Farmall models ABC1433 $2.99 3-Point Lift Arm Category 2 to a equipped w/ a 3-Point Hitch using a .420" Category 1 3-Point Hitch Reducer dia. pin, Replaces: 517758R91 Bushing fits: IH / Farmall models w/ a (1-1/2" usable length) Category 2 3-point hitch switching to a Category 1 3-point hitch (1-1/8" O.D., 7/8" I.D., 1-3/8" o/a length) Cub drawbars, parts IHS700 $189.99 Part # Price Description / Application Drawbar fits: Farmall A only IHS3587 $99.99 Replaces: 43525DAXA USA made NEW! Swinging Drawbar fits: Cub, Replaces: 351430R11 (31-1/2" o/a length, 2" wide, 1/2" thick) IHS910 $145.95 Swinging Drawbar (Straight) fits: H, Replaces: 49206DA IHS157 $46.99 (53-1/4" long, 2-1/4" wide, 3/4" thick) 2-pc. Drawbar End Bracket Set NOTE: Like original. Bare steel. Pin fits: Cub, Cub Loboy goes throughInc.® oval hole in end. Replaces: 350964R11, 350965R11 IH/Farmall IHS912 $175.50 Swinging Drawbar (Straight) IH/Farmall Case IH fits: Super H, 300, 350, F460 IHS566 $39.95 Swinging Drawbar Hardware Kit Replaces: 357530R1, 360632R1 fits: Cub, Cub LoBoy NOTE: Kit includes (53-1/4" long, 2-1/4" wide, 1" thick) (6) 351679R1 drawbar bolts, (2) 103419 NOTE: Like original. Bare steel. Pin cotter pins, (2) 220068 hex nuts, (2) 179887 goes through oval hole in end.
hex HD cap screws, (2) 103323 lock ashers, Chassis parts IHS914 $175.50 (2) 106265 flat washers, (1) 103408 cotter Parts,Swinging Drawbar (Straight) pin, (1) Q3558 pin. fits: M, Replaces: 49200DB IHS213 $6.50 Drawbar Bolt only (53-1/4" long, 2-1/2" wide, 3/4" thick) fits: Cub, Replaces: 351679R1 NOTE: Bare steel. Pin goes through (5/8" dia.) NOTE: Used to bolt brackets oval hole in end. to the final drive housing. Can also be used for other applications. IHS916 $175.50 Swinging Drawbar (Straight) Sold individually. fits: Super M, MTA, 400, 450, 560, F656 Replaces: 357529R1, 359177R1 (53-1/4" long, 2-1/2" wide, 1" thick) NOTE: Like original. Bare steel. Pin Drawbars, parts Tractor goes through oval hole in end. Part # Price Description / Application ABC2010 $25.95 Adjustable Stabilizer Bar (For tractors IHS236 $39.99 w/ Category 1 3-point) Adjustable Swinging Drawbar Roller Pin Clevis from 27-1/2" to 37" length, 23" center fits: H, M, MD & Supers, 300, 350, 400, tube length, 7/8" threaded ends, 7/8" 450, W series (3-7/8" c.c. pin spacing) pin holes NOTE: Adjustable ends for USA made NOTE: Aftermarket part. desired length. Normally 2 used per Will not fit models w/ fasthitch. tractor; Sold individually. FDS022 $46.99 SteinerStandard Drawbar (Category 1) IHS1377 $13.99 Front Drawbar Pin fits: H SN: 39937 & fits: IH/Farmall models up, Super H, W4 SN: 1133 & up, O4, Replaces: 751764R1 OS4, 300 - 460, 404, 504, 544, 606, 656, (1" x 2-1/2" x 26", 7/8" pin size) 664, 666, 686, 706 & 806; Also fits the following using 1-1/8" dia. pin: 756, FDS211 $31.50 (766 up to SN: 13892), 826, 856, (966 up Drawbar Lock (Category 1) to SN: 27089), 1026, (1066 w/ 2-piece fits: 404, 504, 606 drawbar), Replaces: 57654D NOTE: Will fit FDS022 drawbar. (1-1/8" dia. x 3-1/2" long) USA made Drawbars, parts continue on next page
STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com 385 Drawbars, parts cont... Torsion shafts, parts Part # Price Description / Application Part # Price Description / Application IHS1378 $15.99 IHS105 $120.00 Front Drawbar Pin fits: M, MD & Slotted 3-Point Torsion Shaft LH Crank Supers using 8874DA pivot support Arm fits: 1206, 1256, 1456, 1066, 1466, bracket, 400, 450, W6 SN: 1682 & up - 1468, 1566, 1568, Replaces: 392090R3 WD9 & Supers, 560, 600, 650, 660 NOTE: Close out. Replaces: 58657D, 58657DA (1-1/4" dia. x 3-3/4" long) USA made IHS054 $309.99 IHS1379 $5.99 3-Point Torsion Shaft w/ Hole Drawbar Pin Retainer Plate fits: Same fits: 1086 up to SN: 37888, 1486 up to as IHS1377, IHS1378; Also fits 284, 385, SN: 20243, 1586 up to SN: 17123, 3388 454, 464, 484, 574, 584, 674, 684, 784, up to SN: 9038, 3588 up to SN: 9501 884, H84, Replaces: 49139D, 57655D, Replaces: 71386C1 NOTE: Close out. 132794H1 (1.480" long, 1" wide, .377" hole dia., .193" thick) USA made IHS752 $17.65 NOTE: Zinc plated. Torsion Shaft Bolt fits: Same as IHS054 IHS2016 $59.99 Replaces: 71390C1 USA made NOTE: 2 used per tractor; Forged Swinging Drawbar Guide Strap Sold individually.Inc.® fits: H, Replaces: 45184D, 45184DA IHS072 $239.99 (LH)
IHS2022 $59.99
Case IH Forged Swinging Drawbar Guide Strap Crank Arm w/ Hole fits: 1086, 1486, IH/Farmall fits: M ; Serviceable for Super H, Super 1586, 3388, 3588, 3788, 5088, 5288, 5488, M, 300, 350, 400, 450 6388, 6588, 6788 Replaces: 45290D, 45290DB IHS071 Parts,$239.99 IHS072 Replaces: 71388C1 (RH) IHS071 Replaces: 71389C1 IHS428HM $51.99 NOTE: Bolt style.
Swinging Drawbar Roller Shaft Support fits: H, M, MD, MTA, Supers Replaces: 356563R91 Chassis parts IHS428 $57.95 Swinging Drawbar Roller Shaft 3-point hitch kits - USA made Support fits: F300, 340,Tractor 340 Utility, F350, Part # Price Application 400, 450, 460, 460 Utility, 504, 544, 560, IHS3014 $779.95 656, 664, 666; Serviceable for H - MTA Fits: C, Super C, 200, 230 Replaces: 356563R92 w/out fast hitch (Category 1) NOTE: Includes the top link, IHS676 $42.95 brackets to clamp to axle housing & rods and chains for Drawbar Brace Rod fits: Early H up to cultivator lift. The 3 pt. drawbar SN: 36679, Early M up to SN: 21090 is sold separately. Replaces: 41119D (18-1/2" c.c. hole) SteinerUSA made IHS3009 $999.95 Fits: H, M, MD, Supers, MTA, 300, 330, 340, 350, 400, 450, 460, IHS674 $42.95 504, 544, 560, 606, 656, 666, 686, Drawbar Brace Rod fits: Late H SN: Hydro 70 (Category 2) 36680 & up, Late M SN: 21091 & up, NOTE: Allows use of original Super H, Super M, MTA, 300, 340, 350, drawbar. Includes Category 1-2 400, 450, 460, 544, 560, 656, 664, 666 top link & 2 hydraulic cylinders. Replaces: 57233DA (17-1/4" c.c. hole) Fits Row-Crops & Utilities w/out USA made fast hitch, hoses not included.
386 STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm Fast hitch pins - USA made Side dresser fertilizer hopper NOTE: Zinc plated. Sold individually. Fits: Cub, A, B, C, Super A, Super C, Part # Price Description / Application 100, 130, 140, 200, 230, 240; Fertilizer Attachments: 56D - 623 IHS3077 $24.99 Fast Hitch Pin w/ Ball & Handle Replaces: 620720R91, 626461R91 fits: Super C, 200, 230, 340 as a fast hitch to 3-point adapter pin (2 used); T340, TD340 used as an upper 3-point Description Part # Price link attaching pin (1 used) Fertilizer Hopper...... IHS1478 ...... $285.00 Replaces: 517853R21 NOTE: Does not include adjustable quadrant. To bolt this hopper (3/4" O.D., 4-1/2" long - pin only) customer must have existing side dresser attachment. Made w/ IHS3069 $26.95 Fast Hitch Pin w/ Ball & Handle extremely durable tough plastic, the body of this hopper will not fits: 230, 240 as a float locking pin (2 rust. Base is cast iron w/ new gears. Close out. used); 300, 330, 340, 350, F400, F450, 460, 504, 560 as a lateral swing lockout pin (1 used); 544, 656, 666, 706, 756, 766, 806, 826, 856, 966, 1026 as a quick attach pin (4 used), Replaces: 522841R11, 522842R11 (3/4" O.D., 2-7/8" long) IHS3073 $24.99 Fast Hitch Link / Rockshaft Cylinder Pin w/ Ball & Handle fits: F300, F350, Inc.® F400, F450 (2 used as a lateral link pins, IH/Farmall 1 used as a rockshaft cylinder adjusting IH/Farmall Case IH depth pin), Replaces: 520008R11 ABC2357 ABC2362 (7/8" O.D., 3-3/16" long (pin only), 4-1/2" long (pin w/ handle)) Deluxe tractor umbrellas Chassis parts / Miscellaneous Chassis parts Cultivator parts FourParts, oil-tempered spring steel bows are locked into place with individual spring clips, providing ease of Part # Price Description / Application operation and a rigid framework for the cover. Frame IHS024 $14.50 constructed of tubular steel. All metal parts, including Wedge Bolt & Nut only fits Open & frame and mounting brackets, zinc plated for rust closed cultivator shank clips for Cub, resistance and lasting appearance. 54" square cover Super A, Super C, 100, 200 is made of durable polyester material. Each corner Replaces: 512384R1 is double reinforced and has heavy steel grommets. (5/8" dia. thread, 4-1/4" long) Complete with universal mounting bracket. Can be mounted on side of fender, rear end / axle housing, foot platform. IHS025 $41.99 Tractor Lay Off Clamp & Wedge Assy. fits: Cub, ABC2357 • $209.99 A, B, C, Supers, Replaces: 29601BA Red Deluxe Umbrella w/ Brackets NOTE: See website for full application information. ABC2362 • $209.99 White Deluxe Umbrella w/ Brackets
Show your IH/Farmall pride Steiner with our tractor yard spinner!
MIS132 • $79.95 H style Awesome is size and realism, this yard / garden spinner shares the exact detailing as the real thing! Made with fade resistant SolarMax & SunTex fabric this spinner withstands daily UV rays, rain & snow. Includes a heavy duty fiberglass pole & a ground stake (Licensed; 43" x 27-1/2", 18-1/2" dia.)
STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com 387 Mylar decals All decals are USA made.
Part # Price Application Part # Price Application Tips on applying our Farmall International 1945 - 1954 cont... decals DEC266 $45.99 Farmall Regular DEC235 $41.99 AV Culti-Vision All decals are mylar unless otherwise noted. Have the DEC069 $25.99 F12 DEC092 $41.99 B pitted area filled, sanded DEC070 $25.99 F14 DEC110 $25.99 B Culti-Vision smooth and painted. Paint DEC071 $25.99 DEC111 $24.99 must be completely dry F20 BN prior to installation (usually DEC072 $51.99 F30 DEC112 $25.99 BN Culti-Vision 3 - 4 weeks). Wash area with McCormick Deering DEC093 $24.99 C soap & water (new paint included) on which decal is DEC075 $25.99 W30 DEC094 $25.99 H to be placed. DEC077 $49.99 1020 DEC378 $47.99 I4 DEC078 $49.99 DEC237 $47.99 For mylar decals (film 1530 I6 between lettering): Trim McCormick Deering 1939 - 1944 DEC095 $25.99 M to border of design where DEC387 $40.99 Early Circle Cub DEC096 $51.99 Inc.®MD possible prior to removing (up to July 1947) white backing paper. Lightly DEC103 $45.99 W4 DEC088 $30.99 A spray the area with window DEC104 $45.99 W6 cleaner (do not use window DEC089 $30.99 B DEC105 $45.99 cleaner in aerosol can). Peel W9 DEC249 $41.99 C white backing paper from DEC106 $53.99 WD6 Case IH decal and place in position. DEC087 $30.99 H
IH/Farmall DEC107 $53.99 WD9 Squeegee window cleaner DEC441 $105.99 H Vinyl cut from under decal beginning Super series DEC086 $30.99 in center and working M Parts,DEC097 $25.99 Super A (1947-54) outward. If air bubbles DEC373 $49.99 W4 DEC236 $41.99 occur, puncture with pin & Super A Culti-Vision DEC374 $49.99 smooth down. W6 (1947-54) Please note: These decals DEC375 $49.99 W9 DEC242 $41.99 Super AV Culti-Vision have been printed on a DEC376 $55.99 WD9 (1947-54) tough mylar film using DEC098 $24.99 mylar ink. A pressure International 1945 - 1954 Super C (1951-54) sensitive adhesive has been DEC397 $41.99 McCormick Deering DEC099 $25.99 Super H (1953-54)
Miscellaneous employed on the back of Farmall Cub DEC100 $25.99 Super M (1952-54) the mylar to insure good (July 1947 - July 1949) adhesion to any clean, hard DEC101 $31.50 Super MTA gas (1954) DEC090 $25.99 McCormick Farmall surface. Tractor DEC102 $31.50 Super MD (1952-54) Cub (post July 1949) DEC244 $45.99 Super W4 (1953-54) For vinyl cut deals (no DEC432 $92.50 McCormick Farmall film between lettering) Cub (post July 1949) DEC246 $45.99 Super W6 (1952-54) Special order only: Peel Vinyl cut DEC247 $47.99 Super W6TA (1954) backing paper from decal. The decal will be stuck to DEC091 $24.99 A DEC248 $53.99 Super WD9 (1953-56) the application paper. Align DEC109 $25.99 A Culti-Vision the decal using the design, not the application paper, and firmly press decal into place. SlowlySteiner remove the application paper starting at one corner. Please note: The colors are fused into the vinyl eliminating stacking. CAUTION: Inspect all decal pieces before applying to DEC088 DEC091 DEC101 DEC417 tractor. NO REFUNDS on mylar decals if applied to surface and / or if damaged. NO REFUNDS on vinyl cut decals. Store in a cool, dry place. Do not soak in water.
388 STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm Mylar decals - USA made cont... Mylar decals - USA made cont... Part # Price Application Part # Price Application Miscellaneous Miscellaneous cont... DEC414 $28.99 100, 130, 140 gas DEC467 $21.99 NOTE: 12 pieces. Does not Blue Ribbon Reconditioned include model numbers or Cub, A, B, C, H, M, Supers, IH/Farmall decals. I, O, W series, Supers, 100 through 1206 (1939-mid 1960s) DEC415 $28.99 200, 230 gas (3-1/2" x 7") Vinyl cut NOTE: 10 pieces. Does not include model numbers or DEC436 $4.99 IH Logo (2" x 2-1/4) IH/Farmall decals. DEC463 $7.99 IH Logo (4-1/2" x 4-3/4) DEC416 $28.99 240 gas NOTE: 11 pieces. Does not DEC3292 $13.99 IH Logo (6-5/8" x 7-1/8") include model numbers or DEC461 $13.50 International (23-1/2") IH/Farmall decals. Vinyl cut DEC417 $29.99 300 gas DEC453 $24.99 Turbo Decal Pair 1066, 1256, NOTE: 13 pieces. Does not 1456, 1466, 1566 (White & include model numbers or Black) Vinyl cut IH/Farmall decals. DEC455 $24.99 Turbo Decal Pair 1206Inc.® DEC418 $32.99 330 gas (White & Gold) Vinyl cut IH/Farmall NOTE: 12 pieces. Does not DEC522 $8.25 Steering Wheel Cap Insert IH/Farmall Case IH include model numbers or (For 86 series; Serviceable IH/Farmall decals. for other applications using DEC419 $34.99 340 gas IHS781 cap) (1-3/4" O.D.) NOTE: 9 pieces. Does not DEC468 $32.99 2-pc. Red Power include model numbers or 786, 886, 986, 1086, 1486, 1586 Miscellaneous IH/Farmall decals. Parts,Replaces: 144115C2 DEC421 $31.50 350 gas (7-7/8" wide x 8-1/4" tall) NOTE: 11 pieces. Does not NOTE: These were originally include model numbers or introduced for the 1979 Red IH/Farmall decals. Power Showdown. DEC423 $24.99 400, 450 gas DEC469 $73.99 2-pc. Branding Iron NOTE: 11 pieces. Does not 786, 886, 986, 1086, 1486, 1586 include model numbers or Replaces: 77728C91 IH/Farmall decals. (4" wide x 16-3/4" long) DEC424 $36.99 400, 450 diesel NOTE: These were originally NOTE: 15 pieces. Does not used for the 1979 Red Power include model numbersTractor or Showdown. IH/Farmall decals. DEC450 $9.79 Hydra Touch Handle Mylar DEC425 $40.99 460 gas NOTE: 14 pieces. Decal (For 240, 340, 460, 560, Does not include model 660), Replaces: 369778R1, numbers or IH/Farmall 127741 (2" O.D.) decals. Vinyl cut w/ white letters. DEC426 $44.99 460 diesel NOTE: 17 pieces. Does not include model numbers or IH/Farmall decals. Steiner DEC463 DEC461 DEC427 $34.99 560, 660 gas NOTE: 14 pieces. Does not include model numbers or DEC469 IH/Farmall decals. DEC428 $42.99 560, 660 diesel
NOTE: 15 pieces. Does not DEC453 DEC522 DEC450 include model numbers or IH/Farmall decals.
STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com 389 Parts manual Manuals, videos reprints Printed in Build your "how-to" library with us. Reprint manuals USA are a must for your classic IH/Farmall. View tutorials A parts manual (reprint and most requested repair videos at SteinerTractor.TV only) has exploded views of all parts on the tractor. I & T Shop Service™ manuals - Printed in USA With numbered pictures An I & T shop service™ manual tells you how to take a tractor apart, giving you great detail on how to fix it and how to put it back together again. These are authentic assembly and disassembly. manuals that deal with repairs in the language of a mechanic with It also gives you a guide, an easy to use format. They include valuable information as to with numbers, for ordering specifications, torques, etc illustrated by exploded views and photos. If parts, and makes you seem you are in serious repairs or restoration, you need an I & T shop service™ much more informed when manual. It will offer many short cuts and save you time! talking with a dealer. Many service manuals, after telling Part # Price Description you how to disassemble & IH2 $34.95 F12, F14, F20, F30, W12, W30, W40 repair in detail, will simply IH8 $34.95 Super & Non-Super series A, B, C, H, M, MD, MTA, MTAD, Cub say "reassemble". If you have (prior 1957), W4, W6, WD6, W6TA, W6TAD, W9,Inc.® WD9 your PTO in the wash tank, IH10 $34.95 300, 300 Utility, 350, 350 Utility, 350D, 350D Utility, 400, 400D, W400, in pieces, without notes, you W400D, 450, 450D, W450, W450D gas, diesel have a problem. The parts manual can help you out IH25 $34.95 460, 560, 606, 660, 2606 gas, diesel with an exploded view of the IH32 $34.95 706, 756, 806, 856, 1206, 1256, 1456, 2706, 2756, 2806, 2856, 21206,
Case IH PTO unit, and you can see 21256 IH/Farmall immediately how it all goes IH50 $34.95 IH Cub 154, 184, 185 LoBoy, Farmall Cub, IH Cub, IH Cub LoBoy back together. You need a NOTE: Includes electrical wiring diagram. parts manual! Parts, IH201 $34.95 International Harvester Collection: 100, 130, 140, 200, 230, 240, 274, REP1740 • $49.95 284, 330, 340, 354, 364, 384, 404, 424, 444, 504, 2404 models, 2424, 2444, Cub, LoBoy (1947-79) 2504 models, B-275, B-414 NOTE: Includes electrical diagrams. NOTE: Does NOT include IH202 $34.95 International Collection: 544, 656, 666, 684, 686, 784, 884, Hydro 70, 154, 184, 185. Hydro 84, Hydro 86, Hydro 100 models, Hydro 186, 1466, 1468, 1566, REP1808 • $39.95 1568, 1586 154, 184, 185 IHS203 $34.95 International Collection: 454, 464, 484, 574, 584, 674, 766, 786, 826,
Miscellaneous 886, 966, 986, 1026, 1066, 1086 REP1742 • $49.95 BOK3762 $34.95 A, AV, B, BN; Cultivisions 3088, 3288, 3488, 3688 IH56Tractor $34.95 5088, 5288, 5488 NOTE: Includes electrical wiring diagram. REP1745 • $59.95 C42 $34.95 Case IH 235, 245, 255, 265, 275 Supers: A, A1, AV, AV1; Cultivisions NOTE: Includes electrical wiring diagram for 235 & 275. C39 $34.95 Case IH 385, 485, 585, 685, 885 (1987 & up) REP1741 • $49.95 C36 $34.95 1190, 1194, 1290, 1294, 1390, 1394, 1490, 1494, 1594, 1690 C C37 $34.95 2090, 2094, 2290, 2294, 2390, 2394, 2590, 2594 REP1743 • $49.95 Super C
REP1746 • $59.95 Service manual H, HV Steiner Marvel Schebler TSX & DLTX Carburetor REP1749 • $69.95 M, MD, MV, MDV REP4082 • $12.95 This is the factory manual that explains carburetor settings, REP1806 • $49.95 the carburetor rebuilding process, and also provides trouble 100, 130, Early 140 shooting for TSX & DLTX series carburetors. up to SN: 23300
REP1811 • $69.99 200, 230, 240
390 STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm Operator / service manual reprints - Printed in USA An operator’s manual (reprints only) sometimes referred to as the owner’s manual is the manual that came with the tractor. It is the manual that was given to the ultimate consumer by the manufacturer. It can be compared to the manual you receive in the glove box of a new car. This manual gives the owner-operator instructions, shift patterns, capacities (anti-freeze, crankcase, etc.) and adjustment procedures (brakes, clutch, etc). This is a very useful and valuable tool in operating your tractor.
A service manual reprint with wiring diagrams tells you how to take the tractor apart, how to fix it and how to put it back together again. It is a reprint of the manual that the factory furnished the dealer’s shop service department, and was not sent or given to individual retail customers. It deals with repairs in the language of a mechanic. Often times it includes valuable information as to specifications, torques, etc. A service manual reprint will offer many short cuts and save you time!
Part # Price Description REP081 $39.99 Farmall Cub before 1960 (Operator's manual) NOTE: Includes electrical wiring diagram. REP006 $67.95 Cub, Cub LoBoy (Service Manual) NOTE: Includes electrical wiring diagram. IH54 $13.95 Cub 54 A Leveling & Grading Blade (Operator's & Set Up Manual) REP082 $39.99 Farmall A, AV (Owner's manual) REP050 $14.99 Farmall A (Serviceman's manual) REP008 $34.95 A, AV, B, BN (Serviceman's manual) NOTE: Includes electrical wiring diagram.Inc.® REP095 $37.99 Super A, Super AV (Operator's manual) NOTE: Includes electrical wiring diagram. IH/Farmall IH20 $11.95 McCormick Leveling & Grading Blade for Farmall A, Super A (Owner's & Set Up manual) IH/Farmall Case IH REP088 $28.95 McCormick-Deering A-192 Farmall Tractor Plow (Setting Up Instructions / Parts List) (Owner's manual) REP096 $34.95 B (1939-1948) (Operator's manual) NOTE: Includes electrical wiring diagram. REP097 $34.95 C (Operator's manual) NOTE: Includes electrical wiring diagram. REP099 $35.95
Super C (Operator's manual) NOTE: Includes electrical wiring diagram. Miscellaneous REP010 $41.99 H, 4 series (IH Blue Ribbon Service training course) Parts, REP026 $53.95 Farmall H (Operator's manual) NOTE: Includes electrical wiring diagram. REP051 $14.99 Farmall H (Serviceman's manual) REP007 $59.99 M, MD, 6 series, Tractors, Crawler Tractors, Power Units (IH Blue Ribbon Service Manual Reprint) REP098 $34.95 M, MV gas or LP 1939-1952 (Operator's manual) NOTE: Includes electrical wiring diagram. REP101 $38.99 Super MTA gas (Operator's manual) NOTE: Includes electrical wiring diagram. REP100 $39.99 Farmall 300 Row-Crop (Operator's manual) NOTE: Includes electrical wiring diagram. REP116 $39.99 International 300 Utility (Operator's manual) NOTE: Includes electrical wiring diagram. REP115 $42.99 International 350 Utility gas, LP (Operator's manual) NOTE: Includes electrical wiring diagram. REP117 $37.99 Farmall 350 Row-CropTractor (Operator's manual) NOTE: Includes electrical wiring diagram. REP102 $37.99 Farmall 400 gas, LP (Operator's manual) NOTE: Includes electrical wiring diagram. REP103 $39.99 Farmall 450 gas, LP (Operator's manual) NOTE: Includes electrical wiring diagram. REP104 $32.99 Farmall 560 gas (Operator's manual) NOTE: Includes electrical wiring diagram. REP105 $39.99 Farmall 460 diesel, I-560 diesel (Operator's manual) NOTE: Includes electrical wiring diagram. REP118 $52.99 Farmall & Int. 656 gas, diesel (Operator's manual) NOTE: Includes electrical wiring diagram. REP2083 $9.95 Fits: M, MD, W6, WD6 (M & W hand clutch, 12 pages total) NOTE: Parts list also covers H, W4, Super M, Super MD, Super H. REP119Steiner $42.99 Farmall & International 806 gas, diesel, LP (Operator's manual) NOTE: Includes electrical wiring diagram. REP106 $39.99 1206 Farmall & International (Operator's manual) NOTE: Includes electrical wiring diagram. REP120 $39.99 International 766, 966, 1066, 1466 (Operator's manual) REP086 $34.95 GPA-1 Genuine IH "Parts - Accessories" Tractors & Engines (Service Items & Accessories manual. Also covers A - 660 tractors) REP2643 $14.95 Char-Lynn Power Steering (Owner's manual) NOTE: Includes installation, operation, maintenance & trouble shooting information on the pump & torque generator. REP2652 $12.99 Behlen Power Steering (Service & parts manual) NOTE: Includes installation, parts list & service information for the live hydraulic Behlen pump & torque generator.
STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com 391