DOCSLIB.ORG

Live Center Live Center Lathe Center Special Live Center 회사개요

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Live Center Live Center Lathe Center Special Live Center 회사개요 회사개요 (주)엘에스테크 회사명 2015.09.03 설립년월일 이수웅 대표이사 166-81-00181 사업자등록번호 [email protected] 전자우편 051-304-0903 전화번호 051-305-8900 팩스번호 라이브센터, 고정센터, 기타 제작품 생산품목 부산 사상구 삼락천로 134 소재지 홈페이지 http://www.lstechcenter.co.kr www.widinus.com(US) www.iwidin.com(KR) LIVE CENTER LIVE CENTER LATHE CENTER SPECIAL LIVE CENTER 회사개요 (주)엘에스테크 회사명 2015.09.03 설립년월일 이수웅 대표이사 166-81-00181 사업자등록번호 [email protected] 전자우편 051-304-0903 전화번호 051-305-8900 팩스번호 라이브센터, 고정센터, 기타 제작품 기타 고정센터, 라이브센터, 생산품목 부산 사상구 삼락천로 134 삼락천로 사상구 부산 소재지 http://www.lstechcenter.co.kr 홈페이지 HOW TO MAKE LIVE CENTER CODE LC 4 NC BN 4 3 2 1 EXPANSION TYPE, B, N 1 NUT REMOVABLE TYPE B EXPANSION TYPE C CARBIDE TIPPED TYPE N NUT REMOVABLE TYPE TH FOR SCREWING TYPE NC NC TYPE MODEL 2 HD ECONOMIC TYPE NC NC LATHE TYPE NCP NC TYPE HEAVY TYPE SM NC LATHE, HIGH SPEED ROTATION TYPE SMP SM TYPE HEAVY TYPE D50 MINIMIZE THE BITE-INTERFERENCE NK HEAVY CUTTING, HEAVY DUTY TYPE NKD HEAVY, SEMI-HIGH SPEED TYPE(NK POWER TYPE) PT PIPE MACHINING TYPE GR FOR GRINDING MACHINE TYPE 3 4 MORSE TAPER No.4 Mt.0 Ø9.045 1˚29’27” Mt.1 Ø12.065 1˚25’43” Mt.2 Ø17.780 1˚29’50” Mt.3 Ø23.825 1˚26’16” Mt.4 Ø31.267 1˚29’15” Mt.5 Ø44.399 1˚30’26” Mt.6 Ø63.348 1˚29’36” Mt.7 Ø83.058 1˚29’22” LC LIVE CENTER 4 LC LIVE CENTER LM LATHE CENTER 2 Tel. 847-947-8320 회사개요 (주)엘에스테크 회사명 2015.09.03 설립년월일 이수웅 대표이사 166-81-00181 사업자등록번호 [email protected] 전자우편 051-304-0903 전화번호 051-305-8900 팩스번호 라이브센터, 고정센터, 기타 제작품 기타 고정센터, 라이브센터, 생산품목 부산 사상구 삼락천로 134 삼락천로 사상구 부산 소재지 http://www.lstechcenter.co.kr 홈페이지 LIVE CENTER CLASSIFICATION ㆍFor NC Lathe machining ㆍPrevention of the inflow of foreign substance LC-NC ㆍBN(POINT TEC.) ㆍSN(NEW SERIM) ㆍ60N(ROHM) ㆍAdvanced NC TYPE Model ㆍBNHL30, BHSL30 LC-NCP ㆍSNA30 ㆍ604HVL LC-NK ㆍUse for heavy cutting, heavy duty SHAFT LC-SM ㆍUse for high speed rotation NC lathe TURN LC-SMP ㆍAdvanced SM TYPE Model LC-GR ㆍFor Grinding machine heavy cutting and heavy duty ㆍFor NC lathe machining LC-D50 ㆍMinimize the bite-interference LC-HD ㆍFor Wide-use Lathe CAP LC-HDS ㆍAdvanced HD TYPE Model TURN LC-PT ㆍExclusive model of PIPE Machining www.widinus.com 3 회사개요 (주)엘에스테크 회사명 2015.09.03 설립년월일 이수웅 대표이사 166-81-00181 사업자등록번호 [email protected] 전자우편 051-304-0903 전화번호 051-305-8900 팩스번호 라이브센터, 고정센터, 기타 제작품 기타 고정센터, 라이브센터, 생산품목 부산 사상구 삼락천로 134 삼락천로 사상구 부산 소재지 http://www.lstechcenter.co.kr 홈페이지 CONTENTS LC-NC TYPE 06 LC-GRㆍSM TYPE 21 07p NC TYPE 21p GR TYPE 07p NCB TYPE 23p SM TYPE 07p NCC TYPE 23p SMB TYPE 08p NCBC TYPE 23p SMC TYPE 08p NCN TYPE 24p SMBC TYPE 08p NCBN TYPE 24p SMN TYPE 09p NCCN TYPE 24p SMBN TYPE 09p NCBCN TYPE 25p SMCN TYPE 10p NCTH TYPE 25p SMBCN TYPE 10p NCNTH TYPE LC-SMP TYPE 26 27p SMP TYPE 27p SMPB TYPE 27p SMPC TYPE LC-NCP TYPE 12 28p SMPBC TYPE 13p NCP TYPE 28p SMPN TYPE 13p NCPB TYPE 28p SMPBN TYPE 13p NCPC TYPE 29p SMPCN TYPE 14p NCPBC TYPE 29p SMPBCN TYPE 14p NCPN TYPE 14p NCPBN TYPE 15p NCPCN TYPE LC-D50 TYPE 15p NCPBCN TYPE 30 31p D50 TYPE 31p D50B TYPE 31p D50C TYPE 32p D50BC TYPE LC-NKㆍNKD TYPE 16 17p NK TYPE 17p NKB TYPE 17p NKC TYPE 18p NKBC TYPE LC-HD TYPE 33 18p NKN TYPE 34p HD TYPE 18p NKBN TYPE 34p HDC TYPE 19p NKCN TYPE 34p HDS TYPE 19p NKBCN TYPE 35p HDSC TYPE 20p NKD TYPE 35p HDSTH TYPE 4 Tel. 847-947-8320 회사개요 (주)엘에스테크 회사명 2015.09.03 설립년월일 이수웅 대표이사 166-81-00181 사업자등록번호 [email protected] 전자우편 051-304-0903 전화번호 051-305-8900 팩스번호 라이브센터, 고정센터, 기타 제작품 기타 고정센터, 라이브센터, 생산품목 부산 사상구 삼락천로 134 삼락천로 사상구 부산 소재지 http://www.lstechcenter.co.kr 홈페이지 LC-PT TYPE 36 LM-#80 TYPE 45 37p PT-60 TYPE 45p LM-#80 TYPE 37p PT-80 TYPE LM CENTER 38 FLANGE CENTER 46 39p LM-A TYPE 46p LM-G TYPE 39p LM-C TYPE 40p LM-AN TYPE 40p LM-CN TYPE LM-H CENTER 41 FACE DRIVE 47 42p LM-H TYPE 47p FDC TYPE 42p LM-HC TYPE 43p LM-HN TYPE 43p LM-HCN TYPE LM-FN CENTER 44 44p LM FN CENTER www.widinus.com 5 LC-NC NC-TYPE ▶ Live Center for CNC Lathes ▶ Sealed to prevent the inflow of cutting oils and foreign substances ▶ High precision of rotational accuracy and durability through using the triplexed bearing structure. ▶ Shaft heat treated to 58-62 HRc ▶ RUN OUT 0.00012” or 0.003mm NCB TYPE NCBC TYPE NCBN TYPE Minimize the bite-interference Minimize the bite-interference Minimize the bite-interference / Carbide Type / Nut Type NCBCN TYPE NCC TYPE NCN TYPE Minimize the bite-interference Carbide Type Nut Type / Carbide, Nut Type NCCN TYPE NCTH TYPE NCNTH TYPE Carbide, Nut Type Screw Thread type Draw-off Nut & Screw Thread type 6 Tel. 847-947-8320 NC-TYPE unit:mm/kg Morse Dimension Weight Run out Model Max. R.P.M Taper GL A B L1 L2 L3 L4 L5 L (lbs) Max. (inch) LC-3NC NO.3 23.825 50 22 27 45 5 77 81 158 1388.91 4800 0.00011811 LC-4NC NO.4 31.267 66 32 41 55 6.5 102.5 101.5 204 2425.09 3800 0.00011811 LC-5NC NO.5 44.399 82 40 50 65 6.5 121.5 129.5 251 3527.4 3400 0.00019685 LC-6NC NO.6 63.384 105 45 54 80 8 142 182 324 4629.71 3000 0.00019685 ※SPECIAL sizes or dimensions are available with quick turnaround NCB-TYPE ※ HAFT EXTENTION(Minimize the bite-interference) unit:mm/kg Morse Dimension Weight Run out Model Max. R.P.M Taper GL A B b L1 L2 L3 L4 L5 L (lbs) Max. (inch) LC-3NCB NO.3 23.825 50 22 10 47 45 5 97 81 178 1388.91 4800 0.00011811 LC-4NCB NO.4 31.267 66 32 14 53 55 6.5 114.5 101.5 216 2425.09 3800 0.00011811 LC-5NCB NO.5 44.399 82 40 16 65 65 6.5 129.5 129.5 266 3527.4 3400 0.00019685 LC-6NCB NO.6 63.384 105 45 18 78 80 8 182 182 348 4629.71 3000 0.00019685 ※SPECIAL sizes or dimensions are available with quick turnaround NCC-TYPE ※ Carbide Type unit:mm/kg Morse Dimension Weight Run out Model Max. R.P.M Taper GL A B L1 L2 L3 L4 L5 C L (lbs) Max. (inch) LC-3NCC NO.3 23.825 50 22 27 45 5 77 81 10 158 1388.91 4800 0.00011811 LC-4NCC NO.4 31.267 66 32 41 55 6.5 102.5 101.5 14 204 2425.09 3800 0.00011811 LC-5NCC NO.5 44.399 82 40 50 65 6.5 121.5 129.5 18 251 3527.4 3400 0.00019685 LC-6NCC NO.6 63.384 105 45 54 80 8 142 182 25 324 4629.71 3000 0.00019685 ※SPECIAL sizes or dimensions are available with quick turnaround www.widinus.com 7 ※ SHAFT EXTENTION(Minimize the bite-interference) NCBC-TYPE ※ Carbide Type unit:mm/kg Morse Dimension Weight Run out Model Max. R.P.M Taper GL A B L1 L2 L3 L4 L5 C L (lbs) Max. (inch) LC-3NCBC NO.3 23.825 50 22 47 45 5 97 81 10 178 1388.91 4800 0.00011811 LC-4NCBC NO.4 31.267 66 32 53 55 6.5 114.5 101.5 14 216 2425.09 3800 0.00011811 LC-5NCBC NO.5 44.399 82 40 65 65 6.5 136.5 129.5 16 266 3527.4 3400 0.00019685 LC-6NCBC NO.6 63.384 105 45 78 80 8 166 182 18 348 4629.71 3000 0.00019685 ※SPECIAL sizes or dimensions are available with quick turnaround NCN-TYPE ※ Nut Type unit:mm/kg Morse Dimension Weight Run out Model Max. R.P.M Taper GL A B L1 L2 L3 L4 L5 N L (lbs) Max. (inch) LC-3NCN NO.3 23.825 50 22 27 45 5 77 81 70 158 1388.91 4800 0.00011811 LC-4NCN NO.4 31.267 66 32 41 55 6.5 102.5 101.5 85 204 2425.09 3800 0.00011811 LC-5NCN NO.5 44.399 82 40 50 65 6.5 121.5 129.5 105 251 3527.4 3400 0.00019685 LC-6NCN NO.6 63.384 105 45 54 80 8 142 182 130 324 4629.71 3000 0.00019685 ※SPECIAL sizes or dimensions are available with quick turnaround ※ SHAFT EXTENTION(Minimize the bite-interference) NCBN-TYPE ※ Nut Type unit:mm/kg Morse Dimension Weight Run out Model Max. R.P.M Taper GL A B b L1 L2 L3 L4 L5 N L (lbs) Max. (inch) LC-3NCBN NO.3 23.825 50 22 10 47 45 5 97 81 70 178 1388.91 4800 0.00011811 LC-4NCBN NO.4 31.267 66 32 14 53 55 6.5 114.5 101.5 85 216 2425.09 3800 0.00011811 LC-5NCBN NO.5 44.399 82 40 16 65 65 6.5 136.5 129.5 105 266 3527.4 3400 0.00019685 LC-6NCBN NO.6 63.384 105 45 18 78 80 8 166 182 130 348 4629.71 3000 0.00019685 ※SPECIAL sizes or dimensions are available with quick turnaround 8 Tel.
Load more

Recommended publications
  • Fig02 the UHMW Block Marked for Drilling. the Drill Guide Can Be Used Both for Drilling Mortises for Assembly and for a Variety of Decorative Effects
    between your tool rest banjo and Drill Guide lathe center, if not use the right hand version. Introduction Now mark the UHMW block for drilling One-Way came out with a woodturning as in Drawing1. Pencil doesn’t do well on accessory called a Drill Wizard several UHMW, so I used a ultra-fine line marker. years ago. I bought one and liked what I Pencil on masking tape would also work could do with it (to the extent that I well. On one long face measure in 1” from dedicated an extra drill and foot switch to the center of a shorter edge and mark for it), but in a stock configuration it won’t fit tap drilling for the attachment post. Then on my One-Way 1018 lathe, much less measure in 3/8” from the opposite short other mini-lathes. This article describes a edge and 1/2” in from each long edge and Drill Guide that can do most of the Drill mark for the adjustment bolts holes. Last Wizard functions but is engineered quite Fig1 Crosscutting the UHMW on a long face at right angles to the already differently. Instead of mounting a drill on block to length with table saw and marked face, measure in 1” from center of a moveable cradle, it takes advantage of sled. the adjustment hole end and mark for the the low speed bearing capabilities, both shaft hole. The marked UHMW block is rotary and linear, of Ultra High Molecular shown in Fig02. At this point if you have a small lathe you Weight Polyethylene (UHMW is easily may wish to measure the distance between workable with woodworking tools).
    [Show full text]
  • PDH Course M381
    PDHonline Course M 497 (6 PDH) _______________________________________________________________________________________ Conventional Machining Technology Fundamentals Instructor: Jurandir Primo, PE 2013 PDH Online | PDH Center 5272 Meadow Estates Drive Fairfax, VA 22030-6658 Phone & Fax: 703-988-0088 www.PDHonline.org www.PDHcenter.com An Approved Continuing Education Provider www.PDHcenter.com PDH Course M 497 www.PDHonline.org CONVENTIONAL MACHINING TECHNOLOGY – FUNDAMENTALS Introduction Shaping Machines Lathes Slotting Machines - Metalworking lathes - Planing, shaping and slotting calculations - Classification of lathes - Turning operations Boring Machines - Semiautomatic and automatic lathes - Types of boring machines - Accessories - Boring types - Live centers and dead centers - Boring calculations - Rests and micrometer supports - Lathe cutting tools Hobbing & Gear Shaping Machines - Lathe calculations - Common gear generation types - Graduate micrometer and measurements - Details of involute gearing - Tools and inserts - Proper meshing and contact ratio - Common holders with inserts - Gear Shaping Machines - Goose-neck holders with inserts Broaching Machines Drilling Machines - Horizontal broaching machines - Classification of drilling machines - Vertical broaching machines - Application of drilling machines - Broaching principles - Types of drills - Broaching configuration - Drill sizes and geometry - Materials of broaches - Drill point angles - Geometry of broaching teeth - Drill holding & clamping of workpieces - Broaching operations
    [Show full text]
  • Manufacturing Processes 4-5
    MANUFACTURING PROCESSES 4-5 Virasak Book: Manufacturing Processes 4-5 (Virasak) This text is disseminated via the Open Education Resource (OER) LibreTexts Project (https://LibreTexts.org) and like the hundreds of other texts available within this powerful platform, it freely available for reading, printing and "consuming." Most, but not all, pages in the library have licenses that may allow individuals to make changes, save, and print this book. Carefully consult the applicable license(s) before pursuing such effects. Instructors can adopt existing LibreTexts texts or Remix them to quickly build course-specific resources to meet the needs of their students. Unlike traditional textbooks, LibreTexts’ web based origins allow powerful integration of advanced features and new technologies to support learning. The LibreTexts mission is to unite students, faculty and scholars in a cooperative effort to develop an easy-to-use online platform for the construction, customization, and dissemination of OER content to reduce the burdens of unreasonable textbook costs to our students and society. The LibreTexts project is a multi-institutional collaborative venture to develop the next generation of open-access texts to improve postsecondary education at all levels of higher learning by developing an Open Access Resource environment. The project currently consists of 13 independently operating and interconnected libraries that are constantly being optimized by students, faculty, and outside experts to supplant conventional paper-based books. These free textbook alternatives are organized within a central environment that is both vertically (from advance to basic level) and horizontally (across different fields) integrated. The LibreTexts libraries are Powered by MindTouch® and are supported by the Department of Education Open Textbook Pilot Project, the UC Davis Office of the Provost, the UC Davis Library, the California State University Affordable Learning Solutions Program, and Merlot.
    [Show full text]
  • Toolroom Lathes
    TOOLROOM LATHE PRODUCT CATALOG www.clausing-industrial.com | 800.323.0972 TOOLROOM LATHES CIRCULARITY ACCURACY to .00125mm (50 millions of an inch) Designed, Engineered, and Manufactured to the Highest Accuracy Standards! CNC TOOLROOM LATHES CT618CNC Features MODEL CT618CNC CT618CNC/5 • Circular Accuracy to 0.00125 mm Maximum Swing 14.96” (380mm) 14.96” (380mm) (50 millionths of an inch) Maximum Turning Diameter 5.9” (150mm) 5.9” (150mm) • Hardened and precision ground alloy Distance Between Centers 17.99” (457mm) 17.99” (457mm) steel bed ways resist wear Bar Stock Diameter (5C Collet) 1-1/16 (27mm) 1-1/16 (27mm) • Turcite-B slideway bearing surface Hole Through Spindle 1-1/4” (31.75mm) 1-1/4” (31.75mm) between carriage and bed CNC Control Fanuc Fanuc • FANUC CNC Controller (Standard) Spindle Speeds (Variable) • Powerful 3 HP (5 HP is optional) motor 50-4000 RPM 50-6000 RPM with Yaskawa current vector inverter drive Spindle Nose I.D / O.D. 5C (10 deg) / 4 deg Taper 5C (10 deg) / 4 deg Taper for improved torque response at low end Chuck Diameter 6” (150mm) 6” (150mm) • Spindle mounted on high precision Maximum X Axis Travel 8.66” (220mm) 8.66” (220mm) preloaded angular contact ball bearings Maximum Z Axis Travel 13.38” (340mm) 13.38” (340mm) • Precision ballscrew on X, Z axes Rapid Travers 787.4 in/min (20M/min) 787.4 in/min (20M/min) • Protection guard on X, Z axis ballscrews Inverter Spindle Motor 3 HP 5Hp • X, Z axes feeds driven by AC Servo Motor X, Z Axis Servo Motor X: beta 2, Z: beta2 X: beta 2, Z: beta2 • Z axis ballscrews directly
    [Show full text]
  • Lathe Machine Accessories
    E SERIES LATHE MACHINE ACCESSORIES Live Center System Center System Live Light Duty Live Live Lathe Center Live Lathe Center Live Lathe Center Live Lathe Center E01 Center E01 -A Type E01 -A Type E01 -B Type E01 -B Type VPC-MT1, MT2, MT3, MT4, MT5 VLC-212, 213, 214, 215 VLC-212, 213, 214, 215 VLC-213B VLC-214B High-Speed NC Live High-Speed NC Live High-Load NC Live High-Load NC Live High-Load NC Live E02 Center-A Type E02 Center-B Type E02 Center-A Type E02 Center-B Type E02 Center-B Type VLC-MT3A, MT4A, MT5A, MT6A VLC-MT3B, MT4B, MT5B VCF-MT3A, MT4A, MT5A VCF-MT3B, MT4B, MT5B VCF-MT3B, MT4B, MT5B Inter-changeable Inter-changeable High Speed NC Interchangeable High Load Interchangeable High Load Interchangeable E03 Points Live Center E03 Points Live Center E03 Points Live Center E04 Points Live Center E04 Points Live Center VLC-312, 313, 314 VLC-312, 313, 314 VCS-MT3, MT4, MT4P, MT5P VCP-MT4, MT5 VCP-MT4, MT5 High Speed Live High Speed Live High Speed Live High Speed Live High Speed Live E04 Center- AType E04 Center- AType E04 Center-B Type E04 Center-B Type E04 Center-B Type NEW NEW NEW VLC-512, 513, 514, 515 VLC-512, 513, 514, 515 VLC-513B, 514B, 515B VLC-513B, 514B, 515B VLC-513B, 514B, 515B Lathe Center System E05 Bull Nose Pipe Center E05 Bull Nose Pipe Center E05 Bull Nose Pipe Center E06 Lathe Centers E06 Lathe Centers NEW NEW VLC- VLC- VLC- VLC-117~119 VLC-117~119 E06 Lathe Centers E06 Dead center E07 Work-Driving Center E07 Work-Driving Center E07 Work-Driving Center NEW NEW VLC-112, 113, 114, 115, 116 VLC-112, 113, 114, 115,
    [Show full text]
  • 9, Www. , T STATES PATENT OFFICE
    C. W. SAUNDEHS. MANDREL. APPLICATION FILED IIIAII. 5. I9I5. 1,159,999. l PaIenIed »109.91915 / /4 /5' 2 a @uvm/Wo@ 9, www. , T STATES PATENT OFFICE. CHARLES W. SAUNDERS, 0F NORTH PLATTE, NEBRASKA. MANDREL. 1,159,998. Speciñcation of Letters Patent. Patented N ov. 9, 1915. Application íìled March 5, 1915. Serial No. 12,398. To all whom ¿t may Concern .' inder 16 is also slid on the bar 2, and has Be it known that I, CHARLES W. SAUN at its rear end a conical portion 17 which i'nns, a citizen of the United States residing ñts into the conical recess 15 of the cylinder at North Platte, in the county of Lincoln 10. Distance pieces 18 are also slid upon and State of Nebraska, have invented cer the bar 2, and a nut 20 is screwed on the 55 tain new and useful Improvements in Man screwthreaded portion 7 so as to press the drels; and I do hereby declare the follow distance pieces and cylinders toward the ing to be a full, clear, and exact descrip other' end of the mandrel from the nut and tion of the invention, such as will enable thereby clamp the washer securely in place others skilled in the art to which it apper and accurately positioned for turning. The 60 tains to make and use the same. other end of the mandrel from the conical This invention relates to mandrels for hole 4 has a similar conical hole 24 for the turning circular articles, such-:sas washers, other lathe center.
    [Show full text]
  • Light Duty Live Center Live Lathe Center
    Rotagrip Ltd Tel 0044 (0) 121 551 1566 Website www.rotagriponline.com Light Duty Live Center Center is made of SCM420 alloy steel by heat treatment to provide higher rigidity +5& DQGVDWLV¿HG wear-resistance. Center is constituted by ball bearings assembly. Applicable to middle-speed & ' high-speed lathe with light load. ĴSuggested tailstock pressure under 6 kg/cm2 FOR VPC-TYPE Unit:mm Speed Max G.W. PACKING ORDER NO. A B C D D1 L Accuracy R.P.M. θ weight kgs LxWxH CODE NO. VPC-MT1 21 31 56 32 16 108 0.005 3200 60º 0.3 115 x 136 x 38 5001-001 VPC-MT2 26 37 69 40 22 132 0.005 2800 60º 0.5 140 x 45 x 45 5001-002 VPC-MT3 32 46 86 45 26 164 0.005 2000 60º 0.9 170 x 50 x 52 5001-003 VPC-MT4 34 46 108 48 30 188 0.005 1800 60º 1.3 195 x 58 x 56 5001-004 VPC-MT5 50 62 136 68 45 248 0.005 1500 60º 3.2 268 x 86 x 77 5001-005 Live Lathe Center Center shaft & main body is made of SCM420 alloy steel by heat treatment to provide higher rigidity +5& DQGVDWLV¿HG wear- resistance. A TYPE Center is constituted by thrust ball bearing, needle roller bearings & ball bearings assembly. Applicable to middle-speed & high- speed lathe with heavy load. B TYPE SUITABLE FOR B TYPE ※ SMALL -WORKPIECE 2 MACHINING. ĴSuggested tailstock pressure under 6 kg/cm Unit:mm Speed ORDER NO.
    [Show full text]
  • SOUTH BEND LATHE F
    SOUTH BEND LATHE f l'A!taiog 5600, Copyright 1955 by the South Bend L"the Works. All rights reserved. I 9 0 6 50th Anniversary 1956 It was in the fall of 1906 that twin brothers John J. and Miles W. O'Brien set up shop in a small building at South Bend, Indiana and began to design and build precision machine tools. Although bringing with them a rich heritage of Yankee ingenuity, their products were a success only after years of hard, painstaking effort and financial hardship. Both brothers had served toolmaker apprenticeships in some of the finest of the old New England shops. Later they supplemented their practical training with engineering courses at Purdue Univer­ sity and gained wide business experience with several well established machine tool manufacturers and distributors. Recognizing the advantage of specialization, one of the first and most important decisions of the O'Brien brothers was to restrict their products to precision machine tools. It was this policy that enabled them to produce a b~tter machine at a better price. Through half a century there has been no devia­ tion from this policy. Today, as in 1906, the entire resources and facilities of South Bend Lathe are devoted exclusively to the production of precision machine tools. PLANT NO. 2 Operated first as a partnership and incorporated in 1914, the South Bend Lathe Works remained a closely held corpora­ tion until 1936 when its stock was first listed on the Chicago Stock Exchange, now the Midw:est Stock Exchange of Chicago. The stock is now owned by a diversified group of shareholders residing in all parts of the United States and several outside this country.
    [Show full text]
  • Combination Lathe/Mill Model G9729 Instruction Manual
    READ THIS FIRST Model G9729 ***IMPORTANT UPDATE*** For Machines Mfd. Since 4/18 and Owner's Manual Revised 9/13 For questions or help with this product contact Tech Support at (570) 546-9663 or [email protected] The following changes were recently made since the owner's manual was printed: • Parts revised to show new motor. Motor specs updated. Aside from this information, all other content in the owner's manual applies and MUST be read and under- stood for your own safety. IMPORTANT: Keep this update with the owner's manual for future reference. For questions or help, contact our Tech Support at (570) 546-9663 or [email protected]. Revised Lathe Bed Parts Revised Headstock Parts 580 111TV3-1 111TV3-4 111TV3-10 518V3 111TV3-11 111TV3-2 111TV3-5 111TV3-12 111TV3 -3 111TV3 -9 111TV3-13 515V2 550V3-1 550V3-5 120V2 546V2 111TV3 550V3-9 169 550V3-2 550V3-10 125 551V2 550V3-3 117V3 550V3-11 550V3 550V3-12 550V3-4 112V2 550V3-13 REF PART # DESCRIPTION REF PART # DESCRIPTION 111TV3 P9729111TV3 MOTOR 3/4HP 110V 1-PH V3.04.18 515V2 P9729515V2 ECCENTRIC FLANGE V2.04.18 111TV3-1 P9729111TV3-1 R CAPACITOR 50M 450V 1-13/16 X 3-1/2 518V3 P9729518V3 MOTOR PULLEY V3.04.18 111TV3-2 P9729111TV3-2 S CAPACITOR 300M 250V 1-5/8 X 3-1/2 546V2 P9729546V2 MOTOR MOUNT V2.04.18 111TV3-3 P9729111TV3-3 MOTOR JUNCTION BOX 550V3 P9729550V3 MOTOR 3/4HP 110V 1-PH V3.04.18 111TV3-4 P9729111TV3-4 MOTOR FAN COVER 550V3-1 P9729550V3-1 R CAPACITOR 50M 450V 1-13/16 X 3-1/2 111TV3-5 P9729111TV3-5 MOTOR FAN 550V3-2 P9729550V3-2 S CAPACITOR 300M 250V 1-5/8 X 3-1/2
    [Show full text]
  • MODEL T25920/T25926 VARIABLE-SPEED WOOD LATHE OWNER's MANUAL (For Models Manufactured Since 03/16)
    MODEL T25920/T25926 VARIABLE-SPEED WOOD LATHE OWNER'S MANUAL (For models manufactured since 03/16) T25920 T25926 COPYRIGHT © DECEMBER, 2014 BY GRIZZLY INDUSTRIAL, INC. REVISED APRIL, 2016 (WK) WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC. #AWWK17009 PRINTED IN CHINA V2.04.16 This manual provides critical safety instructions on the proper setup, operation, maintenance, and service of this machine/tool. Save this document, refer to it often, and use it to instruct other operators. Failure to read, understand and follow the instructions in this manual may result in fire or serious personal injury—including amputation, electrocution, or death. The owner of this machine/tool is solely responsible for its safe use. This responsibility includes but is not limited to proper installation in a safe environment, personnel training and usage authorization, proper inspection and maintenance, manual availability and compre- hension, application of safety devices, cutting/sanding/grinding tool integrity, and the usage of personal protective equipment. The manufacturer will not be held liable for injury or property damage from negligence, improper training, machine modifications or misuse. Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are: • Lead from lead-based paints. • Crystalline silica from bricks, cement and other masonry products. • Arsenic and chromium from chemically-treated lumber. Your risk from these exposures varies, depending on how often you do this type of work.
    [Show full text]
  • UNIT 10 BASIC LAYOUT OPERATIONS Operations
    Basic Layout UNIT 10 BASIC LAYOUT OPERATIONS Operations Structure 10.1 Introduction Objectives 10.2 Preparing Surface for Layout 10.3 To Layout Parallel Lines to an Edge 10.4 To Layout Lines at Right Angles 10.5 To Layout Horizontal Lines Using a Surface Gauge 10.6 Laying Out Centre Holes 10.7 To Check the Accuracy of the Centre Layout 10.7.1 Divider Method 10.7.2 Lathe Centre Method 10.8 Summary 10.9 Key Words 10.1 INTRODUCTION The preparation of the work surface and laying out straight lines are the primary operations performed in order to make a layout. Since the accuracy of the finished workpiece depends upon the accuracy of the layout, proper care should be taken during the process. Combination tools are used where the accuracy is not important. Square head is used to lay out horizontal and parallel straight lines. The bevel protractor is used for laying out angles while the centre head is used to layout the centre of round and square workpiece. Objectives After studying this unit, you should be able to • know how to prepare the work surface for layout, • layout straight lines using : ¾ the scriber and combination square ¾ the surface gauge and surface plate ¾ the vernier height gauge and surface plate • locate centre holes by : ¾ hermaphrodite calipers ¾ centre head ¾ surface gauge. 10.2 PREPARING SURFACE FOR LAYOUT Layout lines must be visually plain. Therefore, the surface of the work is coated with a layout material so that scribed lines are seen easily. The surface must be clean and free from dust, grease, surface scale, oil, etc., otherwise layout material will not stick to it.
    [Show full text]
  • NIMS Machining Level I Preparation Guide Drill Press
    NIMS Machining Level I Preparation Guide Drill Press Table of Contents Overview page 2 - 5 · Introduction page 2 · Who Wrote the Questions? page 2 · How to Prepare for the Credentialing Exam page 3 · Areas of Knowledge Measured by the Credentialing Exam pages 3, 4 · Before the Credentialing Exam page 5 · At the Testing Site page 5 Machining Exam – Drill Press pages 6 - 44 · Credentialing Exam Content, Sample Question Overview page 6 · Task Specifications page 7 · Task List pages 7 - 25 · Sample Exam pages 8 - 26 · Answer Key pages 26 - 31 © 2003 National Institute for Metalworking Skills, Inc. Page 1 of 29 Overview Introduction This preparation guide or test advisor is intended to help machinists study and prepare for the National Institute for Metalworking Skills (NIMS) written credentialing exam. The sample test will help prepare machinists to take the actual credentialing exam. None of the questions are duplicates from the actual credentialing exam. However, this preparation guide is a useful tool for reviewing technical knowledge and identifying areas of strength and deficiency for adequate credential exam preparation. Achieving a NIMS credential is a means through which machinists can prove their abilities to themselves, to their instructors or employers and to the customer. By passing the NIMS credentialing exam you will earn a valuable and portable credential. Because the credentialing exam is challenging, you will have the satisfaction of proving to yourself and others that you have reached a level of competency that is accepted nationally. Who Wrote the Questions? A panel of technical experts, from all areas of the metalworking industry, wrote the questions used on the actual credentialing exam.
    [Show full text]