DOCSLIB.ORG

Containers Bags

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Containers Bags CONTAINERS, BAGS & STRAWS FOR FOODSERVICE 95 Haverhill Rd. * P.O. Box 897 * Amesbury, MA 01913 * 978-388-6776 www.Shaheenbros.com 36 oz. Black Hinged 1 Compartment 9x9 Microwaveable Container and Lid 50296 100/36 oz. Crystal Classics salad bowls are made from PET. 32 oz. Black Round Bowl 32 oz. Clear Round Lid 50330 250/32 oz. 50331 250/32 oz. 4548432 4308425 8 oz, 16 oz, 32 oz. Clear Round Deli Container Combo PP Microwavable containers that are clear, tough, light and re-usable. Containers and lids made from polypropylene. Resistant to fats and oils. 49918 - 8z, 49922 - 16z, 49926 - 32z. 250 ct. Poly Deli Containers 49280 (s) 8 oz. 1/1M 49282 (s) 12 oz. 500 ct. 49284 (s) 16 oz. 500 ct. Flat Lid fits 8z - 32z 49286 (s) 32 oz. 500 ct. 49288 (s) 1/1M To order call Shaheen Bros. at 978-388-6776 Bio-Pak Black Food Container - Fold Pak - Microwavable, stackable, one- piece design requires no assembly. Poly-coated interior with clay-coated exterior. 49972 9/50 ct. 26 oz. #1GDS 49974 4/50 ct. 66 oz. #3GDS Bio-Pak Natural Carry-Out Container - Leak resistant; holds foods, sauces, and gravies. Heat lamp resistant. Retains heat and vents steam effectively. 49976 9/50 ct. 26 oz. #1 49977 4/50 ct. 66 oz. #3 49981(s) 4/40 ct. 96 oz. #4 PresentaBowls Pro™ Black Square Bowls & Lids The crystal-like design and superior look of PresentaBowls Pro™ black square bowls creates an upscale presentation for your food. 24 oz. Black Square Bowl "K" Lid Clear 50112 (S) 4/63 ct. 50113 252 ct. 32 oz. Black Square Bowl "K" Lid Clear 50098 4/63 ct. 50113 252 ct. 64 oz. Black Square Bowl "K" Lid Clear 50094 4/63 ct. 50113 252 ct. Flurry 4 Cup Carry Out Carrier 8 - 32 oz. Paper - Cream 49969 300 ct. 0117 Beverage Carriers & Carry-Out Trays hold a variety of cup sizes and food types securely. To order call Shaheen Bros. at 978-388-6776 Microwavable Rectangular Takeout Container and Lid Combo, Black Base/Clear Lid 24 oz. Rectangular Black Combo 7x5x2” - 2 piece Microwaveable 50336 150/24 oz. 28 oz. Rectangular Black Combo 8x6x1.5” - 2 piece Microwaveable 50334 150/28 oz. 28 oz. Rectangular Black Combo 6” x 8.5x2.125” - 2 piece Microwaveable 50300 150/28 oz. NC868B 38 oz. Rectangular Black Combo 6” x 8.5x2.625” - 2 piece Microwaveable 50238 (s) 150/38 oz. NC-888-B To order call Shaheen Bros. at 978-388-6776 32 oz. Round Black Combo 2 piece Microwaveable 50332 150/32 oz. 48 oz. Round Black Combo 2 piece Microwaveable 50314 150/48 oz. 48 oz. Round Black Combo 9”X9X2.375”- 2 piece Microwaveable 50307 150/48 oz. NC948B Recycled Polypropylene (Recycled PP) Sandwich 1 Compartment White Hinge 6”x6x3” - Microwaveable 50292 (s) 400 ct. YCN806000 Large Hinge Black Container PP 8.32x8.32x2.88” - Microwaveable 50342 (s) 150 ct. CLX200-3L 32 oz. 1 Compartment White Hinge 9”X9X3” - Microwaveable 50306 (s) 120/32 oz. YCN80901000 Foil Containers, Lids, & Boards 7” Cont Foil Round Lid Foil Board for 7” Round 49170 500 ct. 49171 500 ct. 8” Cont Foil Round Lid Foil Board for 9” Round 49176 (s) 500 ct. 49187 500 ct. 9” Cont Foil Round Lid Plastic Dome for 7” Round 49186 500 ct. 49172 500 ct. 1# Cont Foil Oblong Pan Lid Plastic Dome for 8” Round 49166 (s) 1/1M 49177 (s) 500 ct. 2# Cont Foil 9x6 Pan Lid Plastic Dome for 9” Round 49185 500 ct. 49188 500 ct. Cont Foil Loaf Pan Lid Plastic Dome for Oblong Pan 49200 (s) 200 ct. 49158 2/250 ct. Lid for Loaf Pan Plastic Dome 49198 (s) 200 ct. Foil Steamtable Pans & Lids Steamtable Pan Deep Full Size 49194 50 ct. Steamtable Pan Shallow Full Size 49196 (s) 50 ct. Steamtable Pan Deep Half Size 49204 100 ct. Steamtable Pan Deep Hvy Half Size 49206 100 ct. Lid for Full Size Pan 49197 50 ct. Lid for Half Size Pan 49207 100 ct. To order call Shaheen Bros. at 978-388-6776 ClearPac® SafeSeal Containers Clear Tamper Resistant, Tamper Evident Containers Made of PET, ClearPac SafeSeal containers are specifically designed to inhibit tampering, eliminating the need for shrink bands and wrap labels. The TamperAlert Hinge protrudes outward when torn, alerting the customer that the container has been opened. The hinge remains attached to the container, for no loose plastic pieces. ClearPac SafeSeal containers function as an easy to re-close and re-open, leak resistant two piece container once the hinge is torn. ClearPac SafeSeal has exceptional performance in cold temperatures and accommodates freezing down to -22°F. 4 oz. Cont Clear Hng Tamperproof 40298 (s) 1/400 ct. CH4DEF W/LID 8 oz. Cont Clear Hng Tamperproof CH4DEF 40300 1/200 ct. CH8DEF W/LID 4 oz.Tamper-Resistant, Tamper-Evident 12 oz. Cont Clear Hng Tamperproof Container w/Flat Lid 40302 1/240 ct. CH12DEF W/LID 16 oz. Cont Clear Hng Tamperproof 40304 1/200 ct. CH16DEF W/LID 24 oz. Cont Clear Hng Tamperproof 40305 1/200 ct. CH24DEF W/LID CH8DEF 8 oz. Tamper-Resistant, 32 oz. Cont Clear Hng Tamperproof Tamper-Evident 40307 (s) 1/200 ct. CH32DEF W/LID Container w/Lid CH12DEF CH16DEF CH24DEF 12 oz. Tamper-Resistant, 16 oz. Tamper-Resistant, 24 oz.Tamper-Resistant, Tamper Evident Tamper Evident Tamper-Evident Container w/Flat Lid Container w/Lid Container w/Flat Lid To order call Shaheen Bros. at 978-388-6776 Clear Hinged Lid Containers 6” 6X5X3 Cont Clear Lk Hng 49944 4/125 ct. C57PST1 6X6 Cont Clear Lk Hng 49944 C57PST1 50344 (s) 1/500 ct. L181160000 6” OPS Sandwich Container 7X6X2 Cont Clear Hng 24 oz. 49934 504 ct. C24DER 8X8X3 Cont Clear Lk Hng 49938 1/250 ct. C90PST1 49938 C90PST1 8.5X4.5X2 Cont Clear Hng Medium OPS Container 50359 1/250 ct. C18UTI 9X9X3 Cont Clear Hng 49933 200 ct. C95PST3 9” Cont Hoagie Clear Hng 50354 (s) 2/125 ct. YC181049000 10X5 Cont Hoagie Clear Hng 49937 (s) 2/100 ct. C99HT1 2 Compartment Cont Clear Hng 40316 250 ct. C30DE2R 3 Compartment Cont Clear Hng 49937 C99HT1 40318 250 ct. C90PST3 Hoagie Container 8 oz, 16 oz, 32 oz. Translucent Round Deli Container Combo PP Microwavable containers that are clear, tough, light and re-usable. Containers and lids made from polypropylene. Resistant to fats and oils. 49917 - 8z, 49924 - 16z, 49925 - 32z. 240 ct. To order call Shaheen Bros. at 978-388-6776 Foam Hinged Containers 9.4X9X3 Cont Hng Foam Dinner 49906 2/100 ct. 90HT1R 1 Comp Vent 9.4X9X3 Cont Hng Foam 49919 2/100 ct. 90HTPF1VR w/Removable Lid 90HT1R Large, Single Compartment 3 Comp 9.4X9X3 Cont Hng Foam 49900 2/100 ct. 90HT3R 3 Comp 8.5x8 Cont Hng Foam 49894 (s) 1/150 ct. YHLWO803 9X6X3 Cont Hng Foam Dinner 49914 2/100 ct. 205HT1 9.25x9.25x3 Cont Hng Foam Dinner 95232 1/200 ct.SN200VE 90HT3R Large, Three Compartment 3 Comp 9.5X9X3 Cont Hng Foam 49901 2/100 ct. 95HT3R 5X5 Cont Hng Foam Black Sandwich 95242 1/500 ct. SN225-3L 6" 5X6X3 Cont Hng Foam Sandwich 49930 1/500 ct.60HT1 60HT1 6” Large Sandwich To order call Shaheen Bros. at 978-388-6776 Foam Squat Containers & Lids 6 oz. Cont Foam Squat "S" Lids 49864 (s) 1/1M 6SJ12 12JL 12HDLC 50109 (s) 6SJ12 8 oz. Cont Foam Squat "D" Lids 6 oz. Container 49868 1/1M 8SJ20 20JL 20HDLC 49888 12 oz. Cont Foam Squat "D" Lids 49886 1/500 ct. 12SJ20 20JL 20HDLC 12SJ20 49888 12 oz. Container 16 oz. Cont Foam Squat "D" Lids 49890 1/500 ct. 16MJ20 20JL 20HDLC 49888 24 oz. Cont Foam Squat "Z" Lids 49896 (s) 1/500 ct. 24MJ48 48JL 20JL Translucent, Vented Lid Compostable Containers 6x6 Cont Hng GW Comp - Huhtamaki 49756 1/400 ct. 49754 9x9x3 Cont Hng Comp - Huhtamaki 49754 1/200 ct. 9x7.5x3.5 Cont Hng Comp - Eco 49856 1/150 ct. 9x6x3 Cont Hng Comp - Callico 49752 2/125 ct. 49752 Cont Beige Scoop French Fry Comp - Eco 49857 1/1M 24 oz. Cont Nat Bagasse Comp - Eco 49842 1/400 ct. Cont Clr Sandwich Wedge Comp - Eco 49840 1/500 ct. 49840 To order call Shaheen Bros. at 978-388-6776 Paper White Squat Containers 12 oz. Cont Paper Squat White 49870 1/1M 71226 16 oz. Cont Paper Squat White 49928 10/50 ct. 71091 16 oz. Cont Paper Tall White Lid Vent Plastic Clear 6z - 16z 49871 20/50 ct. 71840 49876 20/50 ct. 8-10 oz. Cont Paper Squat White Lid Vent Paper White 6z - 16z 49869 20/50 ct. 71037 49877 20/50 ct. 8-10 oz. Cont Paper Squat Street Design Lid Vent Plastic Clear Squat 16 - 32z 49872 20/50 ct. 70310 49929 10/50 ct. 16 oz. Cont Paper Tall Street Design 49874 (s) 20/50 ct. 71847 32 oz. Cont Paper White Combo w/Lid 50277 250 ct. 71846 Flexstyle® DSP Paper Food Containers & Lids 8 oz. Cont Paper Squat White 50268 (s) 20/25 ct. 12 oz. Cont Paper Squat Design 50266 20/25 ct. 16 oz. Cont Paper Squat White Lid for Cont Paper White 8 & 12 oz. 49916 20/25 ct. 50267 20/25 ct. 32 oz. Cont Paper Squat White 50386 (s) 20/50 ct. To order call Shaheen Bros. at 978-388-6776 WHITE BAGS White Standard Grocery 4 lb.
Load more

Recommended publications
  • Module 3 Online Quiz
    IAHCSMM CCSVP Vendor Education Program Module Three Assembly and Packaging Introduction: • Once items have been decontaminated and made safe to handle, they are assembled and packaged. While this may sound simple, it is a multi-step process that requires several technical skills. • This module is designed to provide you with an overview of the inspection, assembly and packaging processes. Objectives: • Upon completion of this module, you will be able to: – List the steps in instrument inspection and assembly – Explain the impact that positioning and placement of instruments has on sterilization processes – Identify common packaging methods – List factors that can impact assembly and packaging outcomes Instructions • Read Chapters 10, 11 and 12, in the IAHCSMM Central Service Technical Manual, Eighth Edition, 2016. • Review this module. • Complete the online quiz for Module Three . Central Service Technicians… …are responsible for the quality of instruments. Instrument Manufacturing • Forging • Note: Instruments are • Grinding and Milling inspected throughout • Assembly their manufacturing process. • Heat Tempering • Polishing • Passivation • Final Inspection • Etching Passivation A chemical process applied during instrument manufacture that provides a corrosion-resistant finish by forming a thin transparent oxide film. Reminder: • Be sure to watch the Instrument Manufacturing Process Video from “How It’s Made” that accompanies this unit. Post-operative Care of Surgical Instruments • Keep instruments moist. Do not allow blood to dry on
    [Show full text]
  • Guidelines for the Design and Construction Of
    Guidelines for the Design and Construction of Stormwater Management Systems Developed by the New York City Department of Environmental Protection in consultation with the New York City Department of Buildings July 2012 Michael R. Bloomberg, Mayor Carter H. Strickland, Jr., Commissioner Cover: An extensive green roof system installed atop the NYC Department of Parks and Recreation’s (DPR) Five Borough Building on Randall’s Island. This modular system is one of six variations installed on the roof and covers 800 square feet, con- sisting of two-foot by two-foot trays with six inches of mineral soil and over 1,500 sedum plugs. DPR has installed 25 green roof systems covering over 29,000 square feet on the Five Borough Building rooftop to feature different types and depths of growing medium and plant selection. Dear Friends; The NYC Green Infrastructure Plan, released in September 2010, proposed an innovative ap- proach for cost-effective and sustainable stormwater management. A major part of this plan is our commitment to manage the equivalent of an inch of rainfall on ten percent of the impervious areas in combined sewer watersheds by 2030. To that end, DEP is prepared to spend $1.5 bil- lion to construct green infrastructure projects across the city. Yet public investment alone will not achieve our water quality goals, or our desired recreation and development opportunities. Some of the most cost-effective opportunities are represented by new construction and devel- opment, when stormwater source controls can be easily included in designs and built at a frac- tion of the cost of retrofitting existing buildings.
    [Show full text]
  • Town of Fairfield Recycling Faqs
    Item How to dispose Acids Hazardous waste To find the item you are looking for hold the Aerosol can (food grade only, empty) Put this item in your recycling bin. <Command> or <Ctrl> key + the letter "F" down together, type the item in the box in the Aerosol can (food grade only, (full or partially full) Put this item in your trash. upper right of your screen Aerosol can (NON food grade only, empty) Put this item in your trash. and press <Return> or <Enter>. NOTE: the first key noted is for Mac, the second key noted is Aerosol can (NON food grade only, (full or for PC. partially full) Take this to Hazardous waste Air Conditioner Put in Electronics trailer at the transfer station ( small fee) Aluminum baking tray Put in Recycling Bin - Clean it prior Aluminum foil Put in Recycling Bin - Clean it prior Aluminum Pie Plate Put in Recycling Bin - Clean it prior Ammunition Contact the Police department Animal waste and Bedding Put this item in your trash. Anti Freeze Bring to transfer station Consider donating to local school or creative reuse center. If they contain toxic Art Supplies materials, they should be brought to a Household Hazardous Waste collection event or facility. If not, place this item in the trash for disposal. Connecticut Department of Public Health recommends that a licensed asbestos Asbestos contractor abate the material. Put this item in your recycling bin., Loose caps go in the trash, remove and put any Aseptic Carton, such as a milk carton straws in the trash Ash - Coal Cool ash completely, Put in Bag in trash Ash - Charcoal Gripp Cool ash completely, Put in Bag in trash Ash - Manufactured logs and pellets Cool ash completely, Put in Bag in trash Consider starting a compost bin or food waste collection service ; otherwise put in Baked Goods Trash Balloon Put this item in your trash.
    [Show full text]
  • Catalogorichardginori2012.Pdf
    RICHARD GINORI 1735 ITALIAN LIFESTYLE AND THE ART OF LUXURY PORCELAIN La prima dunque e unica, per continuità e fedeltà, nel ricercare, insieme, il bello dell’utile e il meraviglioso. Quella della ‘fabbrica dell’oro bianco’ è la storia d’una idea e di un’impresa antiche che hanno mantenuto per quasi duecentosettantacinque anni un ruolo di assoluta preminenza, seguendo nei cambiamenti di epoche e stili come nello sviluppo delle tecniche, la via maestra dell’eccellenza artistico-creativa. La “fabbrica dell’oro bianco” nasce nel 1735, nel granducato di Toscana, presso Firenze, dalla grande mente imprenditoriale del marchese Carlo Andrea Ginori. Quando l’aristocratico fiorentino, avvia a Doccia nella villa della tenuta di famiglia, quella che poi diventa una delle più famose manifatture della porcellana artistica, la febbre dell’oro bianco, aveva appena contagiato l’Europa. La messa a punto è difficile ma poi la manifattura decolla. Se nel 1747, nella fabbrica di Doccia sono in funzione 2 fornaci, una per la maiolica, l’altra per la porcellana, nel 1774 i dipendenti diventano circa un centinaio. Nel 1838 le fornaci sono 5, tre per le maioliche e le stufe e 2 per le porcellane e i dipendenti quasi 200. Nel 1889 le fornaci sono diventate 15 con circa 1200 dipendenti. La guida illuminata della famiglia Ginori prosegue fino al 1896 anno in cui avviene la fusione con l’industria ceramista milanese Augusto Richard, che già possiede molte fabbriche al nord. Nasce così la Richard-Ginori. Numerose all’epoca le innovazioni meccaniche introdotte nei laboratori: se da un lato si realizzano i modelli “classici” della produzione docciana, nascono i nuovi esemplari che risentono delle tendenze dell’Art Nouveau.
    [Show full text]
  • Pass the Salt: Efficient Snow & Ice Management
    2018 Pass the Salt: Efficient Snow & Ice Management Infor- Anti-Icing NH Best Management Practices A Proactive Treatment Anti-Icing before a storm is very similar to GET OUT EARLY using a non-stick spray on a pan before Typically anti-icing is most cooking. Just like a non-stick spray prevents effective if applied 1-2 hours food from bonding to the pan, anti-icing pre- before the precipitation be- vents snow and ice from bonding to the pavement so that it can be plowed away. gins however it can be ap- Anti-icing can save you money as it costs plied up to 24 hours in ad- 50% less than reactive deicing. vance. TRY IT FIRST Make Your Own Salt Brine Trying anti-icing for the first When making brine it is important to add enough salt to produce a 23.3% solution time? Make a 23.3% brine which freezes around 0°F. Roughly 2.5lb per solution and before a storm gallon of water will produce a 23.3% solution. spray pavement on your own You can verify using a salometer (~$20) a property using a masonry/ 23.3% solution will have a specific gravity of plant sprayer. Use this ex- 1.176, or 85% salinity. Consult the Brine Mak- ing BMP sheet for more info. periment to determine how best to use it with your cli- ents. How Much Should I Use and When? LEAVE SOME You can apply brine up to 24 hours in advance PAVEMENT BARE of the storm. Typical application rates range It’s always best to use from 0.5 to 0.75 gallon per 1000 sq.ft.
    [Show full text]
  • Supply Chain Packaging Guide
    Secondary Packaging Supply Chain Standards July 7, 2021 Business Confidential | ©2021 Walmart Stores, Inc. 177 // 338 Secondary Packaging Supply Chain Standards - Update Summary These standards have included multiple clarifications of what is required and what is NOT ALLOWED. These changes have been updated throughout the published standards to provide clarity to suppliers. The pages have been reorganized to provide a better flow. PAGE 2021 UPDATES Changes to Supply Chain Standards 185 SQEP Phase 2 and Phase 3 Defect Description/Definitions Added 202 General Case Markings Updated for Dates, Unprocessed Meats, and Cylindrical Items 210-213 Updated Pallet Standards 218 Update "Palletized Shipments" to "Unitized Shipments" 227 Add Inbound Appointment Scheduling Standard 228 Update TV Test Standards 235-237 Add Direct Store Delivery (DSD) aka Direct To Store (DTS) Standards 239 Update SIOC Standards 240 Add eCommerce Product Specific Requirement Standards 241-244 Add Drop Ship Vendor (DSV) Standards 268 Add Jewelry Distribution Center Standards 269-271 Add Optical Distribution Center Standards 275 Add Goods Not For Resale (GNFR) Standards 277-278 Update Meat/Poultry/Seafood Case and Pallet Label Standards 284 Add HACCP Pallet Placard for GCC Shipments 311-312 Add Frozen Seafood Carton Marking Requirements Appendix D Update Receiving Pulp Temperature Range Business Confidential | © 2021 Walmart Stores, Inc. The examples shown are for reference only. Supply Chain Standards 178 // 338 Table of Contents Supply Chain Stretch Wrap . 219 Produce Shipments . 280 Contact Information . 179 Trailer Loading . 220 Automated Grocery Handling . 281 Walmart Retail Link Resources . 180 Trailer Measurements. 221 Grocery Import Distribution Center (GIDC) . 282 Walmart Distribution Center Overview .
    [Show full text]
  • Pfass and Alternatives in Food Packaging (Paper and Paperboard): Report on the Commercial Availability and Current Uses
    PFASs and alternatives in food packaging (paper and paperboard): Report on the commercial availability and current uses Series on Risk Management No. 58 1 Series on Risk Management 0 No. 58 PFASs and Alternatives in Food Packaging (Paper and Paperboard) Report on the Commercial Availability and Current Uses PUBE Please cite this publication as: OECD (2020), PFASs and Alternatives in Food Packaging (Paper and Paperboard) Report on the Commercial Availability and Current Uses, OECD Series on Risk Management, No. 58, Environment, Health and Safety, Environment Directorate, OECD. Acknowledgements: The OECD would like to acknowledge the drafting of a consultancy report by Steve Hollins of Exponent International Ltd. upon which this report is based. It was prepared under the framework of the OECD/UNEP Global PFC Group and included the contribution of information by several organisations (see Annex A). The report is published under the responsibility of the OECD Joint Meeting of the Chemicals Committee and the Working Party on Chemicals, Pesticides and Biotechnology. © Photo credits: Cover: Yuriy Golub/Shutterstock.com © OECD 2020 Applications for permission to reproduce or translate all or part of this material should be made to: Head of Publications Service, [email protected], OECD, 2 rue André-Pascal, 75775 Paris Cedex 16, France ABOUT THE OECD 3 About the OECD The Organisation for Economic Co-operation and Development (OECD) is an intergovernmental organisation in which representatives of 36 industrialised countries in North and South America, Europe and the Asia and Pacific region, as well as the European Commission, meet to co-ordinate and harmonise policies, discuss issues of mutual concern, and work together to respond to international problems.
    [Show full text]
  • Archeological Testing of the Engstrand Well 41WM1157, in Williamson County, Texas
    Volume 2007 Article 10 2007 Archeological Testing of the Engstrand Well 41WM1157, in Williamson County, Texas Bradford Jones Rachel Feit [email protected] Follow this and additional works at: https://scholarworks.sfasu.edu/ita Part of the American Material Culture Commons, Archaeological Anthropology Commons, Environmental Studies Commons, Other American Studies Commons, Other Arts and Humanities Commons, Other History of Art, Architecture, and Archaeology Commons, and the United States History Commons Tell us how this article helped you. Cite this Record Jones, Bradford and Feit, Rachel (2007) "Archeological Testing of the Engstrand Well 41WM1157, in Williamson County, Texas," Index of Texas Archaeology: Open Access Gray Literature from the Lone Star State: Vol. 2007, Article 10. https://doi.org/10.21112/ita.2007.1.10 ISSN: 2475-9333 Available at: https://scholarworks.sfasu.edu/ita/vol2007/iss1/10 This Article is brought to you for free and open access by the Center for Regional Heritage Research at SFA ScholarWorks. It has been accepted for inclusion in Index of Texas Archaeology: Open Access Gray Literature from the Lone Star State by an authorized editor of SFA ScholarWorks. For more information, please contact [email protected]. Archeological Testing of the Engstrand Well 41WM1157, in Williamson County, Texas Licensing Statement This is a work for hire produced for the Texas Department of Transportation (TxDOT), which owns all rights, title, and interest in and to all data and other information developed for this project under its contract with the report producer. The report may be cited and brief passages from this publication may be reproduced without permission provided that credit is given to TxDOT and the firm that produced it.
    [Show full text]
  • Beer and Wine
    www.stpats.com 512•989•9727 with on-line ordering Fax Orders: 512-989-8982 and more information, newsletters, and updates [email protected] Welcome to St. Pat’s. I hope you Shipping and Ordering Infor- Table of Contents enjoy our catalog. mation on Page 25. We are simply delighted with our Equipment Sets ....................... 2-3 new 10,000’ store and warehouse which 5% Discount to AHA Members. Extract Kits .............................. 4-5 we built last year. Needless to say it was Malt Extract and Sugars .......... 6-7 paid for by our customers, who are known See page 25. Grain ..................................... 8-10 to be above average in every way. If you Partial Mash Kits ................. 10-11 live in Texas please drop by. If you’re All Grain Kits .......................11, 13 outside Texas, pick up a passport and All Grain Instructions .................12 come visit us. In any event, the additional Hops .................................... 13-15 space will allow us to provide better Yeast ................................... 16-20 service to both local and mail order Soda, Liqueurs, Flavorings, customers as well as more products for Spices, and Vinegar ..................21 years to come. Homebrewing Instructions... 22-24 As always, I appreciate your support, Shipping and Ordering ..............25 Wine .................................... 26-28 Honey, Mead, Cider ..................29 Clarifiers, Nutrients, Chemicals .30 Brushes, Mills & Bags, Tuns .....31 Lynne O’Connor pH meters, Hydrometers, and 2 Austin Locations Thermometers ..................... 32-33 North Store St. Pat’s at Waterloo Party Kegs.................................33 1828 Fleischer Dr Austin, TX 78728 4th & Guadalupe at Waterloo Brewing Co Fermenters and Accessories34-35 512-989-9727 fax 512-989-8982 401A Guadalupe Austin, TX 78701 Bottles and Cappers..................36 Mon-Fri 9-6, Sat 10-3, closed Sunday 512-499-8544 Wort Chillers..............................37 to Round Rock Wed, Thu, Fri 12-6:30, Sat 10-6, Sun 1-5 Pots ...........................................38 St.
    [Show full text]
  • The Dairy Industry Steps Towards Sustainability What's Inside
    DWisconsin airyCenter for Dairy Research Pipeline A Technical Resource for Dairy Manufacturers Volume 20 Number 3 2008 The dairy industry steps towards sustainability High prices for energy, disappearing ocean fisheries, contaminated ground water, and climate change. You may have read about these issues in newspapers or blogs, or perhaps watched a documentary on television. Earth’s problems can seem insurmountable, the answers both discouraging and slow in coming. Perhaps that is why the concept of sustainability is gaining recognition, it suggests a path, a method, an option we can start to implement. In a 1987 United Nations report, Norwegian prime minister Gro Harlem Brundtland defined sustainability as “Ömeeting the needs of the present without compromising the ability of future generations to meet their own needs.” Back in 1971, economist Nicholas Geoegescu-Roegen offered some sustainable daily rules; “ Renewable resources such as fish, soil, and groundwater must be used no faster than the rate at which they regenerate. Non-renewable resources such as minerals, and fossil fuels, must be used no faster than renewable substitutes for them can be put in place. And, pollution and wastes must be emitted no faster than natural systems can absorb them, recycle them, or render them harmless.” Rising energy costs and increasing levels of green house gasses like carbon dioxide (CO2) have influenced today’s increasing interest in sustainability. What will this mean for the dairy industry? We don’t know yet, but we have a few ideas. The first Sustainability Summit for U.S. Dairy gathered in June at the Applied Sustainability Center at the University of Arkansas in Rogers, Arkansas.
    [Show full text]
  • PLASTIC TIMES Together for Plastics Telangana and Andhra Plastics Manufacturers Association for Private Circulation to Members
    PLASTIC TIMES Together for Plastics Telangana And Andhra Plastics Manufacturers Association For Private Circulation to Members. Not for sale Book-Post May - June, 2015 May ‐ June, 2015 YOUR SATISFACTION IS OUR CONFIDENCE u White Masterbatches u Black Masterbatches u Color Masterbatches u Special Effect Masterbatches u Fibre / Marble Masterbatches u Fluorescent Masterbatches u Metalic Masterbatches u Glow in Dark Masterbatches u Additive Masterbatches u Transparent Filler u Polypropylene Filler Compounds u Pre-dispersed Pigment Concentrates u FDA Approved Antimicrobial Antibacterial Masterbatches u Anti Fibiliration Masterbatches (antifab) D.No. 7-2-123/2, Old Kurnool Road, Kattedan, Hyderabad - 500 077. Telangana. INDIA. Mobile : +91-9849202090, 9246537980 Email: [email protected] Website : www.vivekpolymers.com Plastic Times 3 May ‐ June, 2015 4 Plastic Times May ‐ June, 2015 PLASTIC TIMES Vol X May - June, 2015 Issue - I EDITORIAL BOARD President Writes... Dear Members, Chairman It gives me immense pleasure informing you that the R.S.LOYA 47th AGM of Telangana And Andhra Plastics Manufacturers Association is being held on 24th July, 2015 at Haritha Plaza, Begumpet, Hyderabad from 7PM onwards. I request members to take part in the proceedings. Members We would like to inform our members that Mr.V Anil Reddy, Immediate Past ANIL NAGDA ROHIT MITTAL President of TAAPMA, has been elected as President FTAPCCI. Through this VIMALESH GUPTA forum we would like to congratulate him on behalf of the whole Plastic Industry. PANKAJ AGARWAL Published by The State Govt. of Telangana has released all subsidies upto March 2015. Any TELANGANA AND ANDHRA member who has not received the subsidy should inform the Commissioner of PLASTICS MANUFACTURERS Industries so that the grievances can be addressed.
    [Show full text]
  • A Risk Based Cleaning and Disinfection Program
    A Risk Based Cleaning and Disinfection Program Jim Polarine Jr. MA. Senior Technical Service Manager May 22, 2019 Copyright © 2018 STERIS Corporation. All Rights Reserved. 1/ Understand the basis of Chemical selection, use and application Describe the Detail the Importance of LEARNING proper order of Cleaning and cleaning Disinfection OBJECTIVES List appropriate application methods Copyright © 2018 STERIS Corporation. All Rights Reserved. 2/ Topics Covered ➢ Regulatory Requirements ➢ Cleaning and Disinfecting Technologies ➢ Cleaning and Disinfection Techniques ➢ Rotation and Residues Copyright © 2018 STERIS Corporation. All Rights Reserved. 3 3/ Regulatory Requirement USP 41 <1072> Disinfectants and Antiseptics: “A sound cleaning and sanitization program is needed for controlled environments used in the manufacture of Pharmacopeial articles to prevent the microbial contamination of these articles. Sterile drug products may be contaminated via their pharmaceutical ingredients, process water, packaging components, manufacturing environment, processing equipment, and manufacturing operators” Copyright © 2018 STERIS Corporation. All Rights Reserved. 4 4/ Industry Guidance PDA TECHICAL REPORT #70 “Cleaning and Disinfection Programs from Aseptic Manufacturing Facilities”: “The purpose of the cleaning and disinfection program is not only to control microbial contamination but also to serve as a corrective action for the loss of control for viable excursions contamination. While the destruction of viable cells are an integral part of the cleaning and disinfection program, the use of disinfection as a singular focus without efforts to control contamination from entering the area is without technical merit. Environmental monitoring (EM) evaluates the efficacy of controls on the manufacturing environment. It is through control of bioburden levels entering the area, along with cleaning and disinfection, that acceptable viable control of the manufacturing or appropriate testing environment is achieved.
    [Show full text]