DOCSLIB.ORG

Chemistry Extended Essay

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Chemistry Extended Essay View metadata, citation and similar papersbrought atCORE core.ac.uk to you by provided by TED Ankara College IB Thesis ÖZTEKİN, Ali Barış 001129100 Chemistry Extended Essay “Investigation of the effect of magnetism on copper and iron electrolysis” Ali Barış ÖZTEKİN 001129100 Session: May 2012 Word Count:3954 Supervisor: Serenay Tarhan Güler TED Ankara Collage Foundation High School 1 ÖZTEKİN, Ali Barış 001129100 ABSTRACT Electrolysis has various real life applications in many different areas. It is used in the production many active metals, such as aluminum, and in automobile industry to fortify the metal used in the bodies of cars. Electrolysis is also important for space programs and military, where the electrolysis of water is used to produce necessary oxygen for the personnel in some vehicles such as spacecrafts and submarines. Since the rate of electrolysis is very important for these areas, a new method that increases the rate would benefit many areas that use the electrolysis in the process. This investigation is concerned with the effect of magnetism on the rate of electrolysis. For speeding up electrolysis for the areas mentioned earlier. The aim was to determine the effect of magnetic field with different magnitudes on the rate of electrolysis of copper and iron at a constant voltage, pressure with the same concentration of CuSO4 solution in 3 minutes. Two separate circuit systems were used, one being the electrolysis and other being the electromagnet. The experimentation process of the investigations consists of two parts. First experiment was carried out and the results showed an increase in the rate of electrolysis as the magnetic field increased. The second experiment was carried out to explain the gathered data in the first experiment in the light of Faraday’s Laws of Electrolysis, since the raw results from the first experiment needed to be expanded to be applicable to the Faraday’s Law. After the necessary calculations from the first experiment and data collection from the second experiment, the results were consistent with the Faraday’s Law. The final analysis showed that the increase in the strength of the magnetic field has increased the rate of electrolysis exponentially by changing the current of the electrolysis circuit. Word Count:296 2 ÖZTEKİN, Ali Barış 001129100 CONTENTS Abstract……………………………………………………………………………………… i Introduction…………………………………………………………………..………...…… 1 Electrolysis………………………..…………………………………….………...…. 2 Faraday’s Law of Electrolysis………………...……………………….………...…. 5 Magnetism.………………………..…………………………………….………...…. 6 Planning and Development…………………………………………….……………………6 Experiment 1……………………………………...…………………………..………...…… 7 Variables and Constants………….……………………………………………...…. 7 Data Collection of Experiment 1………………………..…………….…...…...…...9 Calculation of the Moles of Copper and Electrons ……………...……………… 10 Experiment 2……………………………………...………………………….………...……14 Data Collection of Experiment 2………………………..…………….…...…...…..13 Calculation of the current from the results of the Experiment 1………..…...…. 13 Results…………………………………...……………………………………….………….15 Conclusion……………………………..………………………………………………….... 17 Evaluation of the Experiments and Results……………………………..……………….. 18 Evaluation of the Materials and Method………………………………..……………….. 18 Further Investigation……………………………………………………..……………….. 19 Appendix 1…………………………………….…………………………..……………….. 20 Appendix 2…………………………………….…………………………..……………….. 24 3 ÖZTEKİN, Ali Barış 001129100 Appendix 3…………………………………….…………………………..……………….. 29 Bibliography…………………………………………………………….………………..…32 Pictures from the Experiment……..………………………………….………….……...…33 4 ÖZTEKİN, Ali Barış 001129100 INTRODUCTION The aim of this investigation is to identify a relation between the rate of electrolysis and the magnetic field. The chosen fields of study are Chemistry and Physics because the magnetic field and electrolysis are both concerned with the way charged particles’ move. The research question can be narrowed down to “What is the effect of magnetic field with different magnitudes on the rate of electrolysis of copper and iron at a constant voltage, pressure with the same concentration of CuSO4 solution in 3 minutes?” From the core subject High Level Chemistry and Physics in the IB curriculum it is taught that electrochemistry and magnetism play an important role in our lives even though we don’t notice them too much. The batteries that we use in daily life are based on redox reactions, which are an evolved version of an electrolytic cell. Also we use electrolysis in industrial process such as electroplating or electrolysis of water to obtain hydrogen and oxygen gases. In addition magnetism, also play an important role in our lives. From Magnetic Resonance Imaging in medicine to headphones magnetism has a great number of real-life applications. The reason of integration of Chemistry and Physics is that, although their fields of study are the study of matter in different aspects, as Physics is the study of matter and its motion and the Chemistry is the study of the matter in molecular level, they have common elements, such as particle physics and electrochemistry. The way atomic particles behave in particle physics for a certain physical situation is also valid for how particles behave in chemistry in the same circumstances therefore affecting the way the chemical reactions occur. The magnetic field accelerates charged particles by applying a force on them and since the electrolysis occurs by the movement of ions in a solution, the magnetic field should have an effect on the ions movement in electrolysis. (See Appendix 2 for detailed information.) If such an effect is discovered, the hypothesis is that the electrolysis process will be easier to carry out in industrial use, which will speed up the production of materials and benefiting the economy. The investigation of the effect of magnetism on electrolysis required an original experimental setup and procedure because of the fact that there weren’t any designated procedures for this kind of investigation. The electrolysis setup and an electromagnet were needed to be combined together in order to gather a proper set of data. 5 ÖZTEKİN, Ali Barış 001129100 This issue was resolved by placing the electromagnet below the electrolysis setup with the help of a tripod. The chosen place for electromagnet was below the electrolysis setup since the optimum effect of the magnetism could be evenly distributed.( See Figure 1) Electrolysis Atoms consist of electrically charged particle, which means that electricity has an important role in all the chemical reactions. Electricity is the name given for the flow of charged particles. The current is carried by electrons moves because of a source of potential difference in a circuit. In solutions of salts, the charge is carried in the circuit by the particles called ions. The substances that release ions when they are melted or dissolved in water are called electrolytes. The substances that are responsible for connecting the electrolytes to the current are called electrodes. There are two main electrochemical systems. The first one is called the electrolytic cell, which consists of two electrodes placed into an electrolyte solution and an outside source that provides potential difference is connected to the system. This kind of cells are capable of decompose elements from the solution, which is known as electrolysis and based on a non-spontaneous reaction. The other type of electrochemical cell is the voltaic cell. In this system, two electrodes made up of different metals are placed in an electrolytic solution, which provide a potential difference that creates a current in the system. This system is based on a spontaneous reaction to provide electricity. Both of these systems rely on oxidation-reduction (redox) reactions. In these systems the electrode in which oxidation occurs is called anode, and the electrode in which reduction occurs is called cathode. Electrolysis is a chemical process, which derives energy from an outside source of electrical energy to decompose molten salts or solutions to produce pure elements. Electrolysis requires two electrodes that are placed in a molten salt or a solution and any kind of direct current source. Similar to voltaic cells, the electrode where the reduction process occurs is referred as cathode. Other electrode where the oxidation process occurs is referred as anode. To this process to occur correctly, anode should be connected to the negatively charged side of the power source and the cathode should be connected to the positively charged side of the power supply. The negatively charged side repels the electrons and the positively charged side attracts electrons. This incident provides the circle that enables the 6 ÖZTEKİN, Ali Barış 001129100 electrons to transfer from one electrode to another. In other words electric current enables to drive a reaction, which is actually non-spontaneous in standard conditions. Picture 1: Electrolysis.1 Illustration of a simple electrolysis setup Electrolysis is a very important industrial process, which is used in the production process of active metals such as magnesium, sodium, and aluminum.2 There are some customized processes that enable to extract pure metals from rocks such as the Hall-Héroult Process for the production of aluminum.3 The process dissolves alumina in molten cryolite, which is a natural mineral containing alumina, and electrolyzing the molten salt bath to obtain pure aluminum metal. 1 http://www.ustudy.in/sites/default/files/electrolysis.jpg
Load more

Recommended publications
  • Steel Production Through Electrolysis: Impacts for Electricity Consumption 0, 0, 75
    Font Family: Benton Sans 131, 176, 70 Steel production through electrolysis: impacts for electricity consumption 0, 0, 75 204, 102, 51 Adam Rauwerdink 144, 144, 144 VP, Business Development October 18, 2019 Font Family: A 3,000 year old formula Benton Sans Iron Ore Carbon (Coal) Iron Carbon Dioxide 131, 176, 70 Fe2O3 C Fe CO2 0, 0, 75 204, 102, 51 >2 144, 144, 144 Gt CO2 per year (8% of global emissions) Iron Age 1000 BC Digital Age 2019 2 Boston Metal | 2019 Font Family: Steel in 2018 Benton Sans 131, 176, 70 Aluminium is #2 at 1,800 64 million tonnes 0, 0, 75 million tonnes 204, 102, 51 70% 30% 144, 144, 144 Integrated Steel Mill Mini Mill (Iron ore new steel units) (Scrap recycled steel units) Source: World Steel Association 3 Boston Metal | 2019 Font Family: Integrated steel mill: material flow Benton Sans 131, 176, 70 0, 0, 75 204, 102, 51 144, 144, 144 4 Boston Metal | 2019 Font Family: Molten oxide electrolysis (MOE) is emissions free Benton Sans Molten Oxide Electrolysis (MOE) 131, 176, 70 Iron Ore Electricity Iron Oxygen 0, 0, 75 - Fe2O3 e Fe O2 204, 102, 51 144, 144, 144 No carbon in the process = No CO2 emitted Electricity decarbonization eliminates/reduces indirect emissions! 5 Boston Metal | 2019 Font Family: Changing the formula from coal to electricity Benton Sans Iron Ore Carbon (Coal) Iron Carbon Dioxide 131, 176, 70 Fe2O3 C Fe CO2 0, 0, 75 204, 102, 51 Molten Oxide Electrolysis (MOE) 144, 144, 144 Iron Ore Electricity Iron Oxygen - Fe2O3 e Fe O2 6 Boston Metal | 2019 Font Family: MOE is more energy efficient Benton
    [Show full text]
  • Electrochemistry of Fuel Cell - Kouichi Takizawa
    ENERGY CARRIERS AND CONVERSION SYSTEMS – Vol. II - Electrochemistry of Fuel Cell - Kouichi Takizawa ELECTROCHEMISTRY OF FUEL CELL Kouichi Takizawa Tokyo Electric Power Company, Tokyo, Japan Keywords : electrochemistry, fuel cell, electrochemical reaction, chemical energy, anode, cathode, electrolyte, Nernst equation, hydrogen-oxygen fuel cell, electromotive force Contents 1. Introduction 2. Principle of Electricity Generation by Fuel Cells 3. Electricity Generation Characteristics of Fuel Cells 4. Fuel Cell Efficiency Glossary Bibliography Biographical Sketch Summary Fuel cells are devices that utilize electrochemical reactions to generate electric power. They are believed to give a significant impact on the future energy system. In particular, when hydrogen can be generated from renewable energy resources, it is certain that the fuel cell should play a significant role. Even today, some types of fuel cells have been already used in practical applications such as combined heat and power generation applications and space vehicle applications. Though research and development activities are still required, the fuel cell technology is one of the most important technologies that allow us to draw the environment friendly society in the twenty-first century. This section describes the general introduction of fuel cell technology with a brief overview of the principle of fuel cells and their historical background. 1. Introduction A fuel cellUNESCO is a system of electric power – generation,EOLSS which utilizes electrochemical reactions. It can produce electric power by inducing both a reaction to oxidize hydrogen obtained by reforming natural gas or other fuels, and a reaction to reduce oxygen in the air, each occurringSAMPLE at separate electrodes conne CHAPTERScted to an external circuit.
    [Show full text]
  • Teaching H. C. Ørsted's Scientific Work in Danish High School Physics
    UNIVERSITY OF COPENHAGEN FACULTY OF SCIENCE Ida Marie Monberg Hindsholm Teaching H. C. Ørsted's Scientific Work in Danish High School Physics Masterʹs thesis Department of Science Education 19 July 2018 Master's thesis Teaching H. C. Ørsted’s Scientific Work in Danish High School Physics Submitted 19 July 2018 Author Ida Marie Monberg Hindsholm, B.Sc. E-mail [email protected] Departments Niels Bohr Institute, University of Copenhagen Department of Science Education, University of Copenhagen Main supervisor Ricardo Avelar Sotomaior Karam, Associate Professor, Department of Science Education, University of Copenhagen Co-supervisor Steen Harle Hansen, Associate Professor, Niels Bohr Institute, University of Copenhagen 1 Contents 1 Introduction . 1 2 The Material: H. C. Ørsted's Work . 3 2.1 The Life of Hans Christian Ørsted . 3 2.2 Ørsted’s Metaphysical Framework: The Dynamical Sys- tem............................. 6 2.3 Ritter and the failure in Paris . 9 2.4 Ørsted’s work with acoustic and electric figures . 12 2.5 The discovery of electromagnetism . 16 2.6 What I Use for the Teaching Sequence . 19 3 Didactic Theory . 20 3.1 Constructivist teaching . 20 3.2 Inquiry Teaching . 22 3.3 HIPST . 24 4 The Purpose and Design of the Teaching Sequence . 27 4.1 Factual details and lesson plan . 28 5 Analysis of Transcripts and Writings . 40 5.1 Method of Analysis . 40 5.2 Practical Problems . 41 5.3 Reading Original Ørsted's Texts . 42 5.4 Inquiry and Experiments . 43 5.5 "Role play" - Thinking like Ørsted . 48 5.6 The Reflection Corner . 51 5.7 Evaluation: The Learning Objectives .
    [Show full text]
  • Electrochemistry –An Oxidizing Agent Is a Species That Oxidizes Another Species; It Is Itself Reduced
    Oxidation-Reduction Reactions Chapter 17 • Describing Oxidation-Reduction Reactions Electrochemistry –An oxidizing agent is a species that oxidizes another species; it is itself reduced. –A reducing agent is a species that reduces another species; it is itself oxidized. Loss of 2 e-1 oxidation reducing agent +2 +2 Fe( s) + Cu (aq) → Fe (aq) + Cu( s) oxidizing agent Gain of 2 e-1 reduction Skeleton Oxidation-Reduction Equations Electrochemistry ! Identify what species is being oxidized (this will be the “reducing agent”) ! Identify what species is being •The study of the interchange of reduced (this will be the “oxidizing agent”) chemical and electrical energy. ! What species result from the oxidation and reduction? ! Does the reaction occur in acidic or basic solution? 2+ - 3+ 2+ Fe (aq) + MnO4 (aq) 6 Fe (aq) + Mn (aq) Steps in Balancing Oxidation-Reduction Review of Terms Equations in Acidic solutions 1. Assign oxidation numbers to • oxidation-reduction (redox) each atom so that you know reaction: involves a transfer of what is oxidized and what is electrons from the reducing agent to reduced 2. Split the skeleton equation into the oxidizing agent. two half-reactions-one for the oxidation reaction (element • oxidation: loss of electrons increases in oxidation number) and one for the reduction (element decreases in oxidation • reduction: gain of electrons number) 2+ 3+ - 2+ Fe (aq) º Fe (aq) MnO4 (aq) º Mn (aq) 1 3. Complete and balance each half reaction Galvanic Cell a. Balance all atoms except O and H 2+ 3+ - 2+ (Voltaic Cell) Fe (aq) º Fe (aq) MnO4 (aq) º Mn (aq) b.
    [Show full text]
  • Electrolysis Through Magnetic Field for Future Renewable Energy
    International Journal of Recent Technology and Engineering (IJRTE) ISSN: 2277-3878, Volume-8 Issue-2S, July 2019 Electrolysis Through Magnetic Field for Future Renewable Energy Asaad Zuhair Abdulameer, Zolkafle Buntat, Rai Naveed Arshad, Zainuddin Nawaw Production of Hydroxide through the electrolysis of water, Abstract: Hydrocarbon fuels are the best source of energy; resolve numerous possible problems of using hydroxide as a however, they have some drawbacks. Because of extensive usage fuel supplement [9, 10]. In this attempt, magnetic field and replacement difficulties, it is not financially possible to electrolysis is a technique of electrolysis that is a more entirely disregard them in the coming days. Hydrogen with Oxygen (hydroxide-HHO) gas as a fuel supplement is one convenient light source to compare with solar energy for possible way to reduce consumption and emissions of commercial electrolysis [11]. Although this process gives a hydrocarbon fuels. However, the accessibility and rate of small proportion of hydrogen production by using the current compressed hydrogen (H2) have made it challenging. Electrolysis method, we believed that this process would contribute a lot of water, resolve numerous possible complications of using to society if the existing methods are upgraded with suitable hydroxide for fuel to progress hydrocarbon burning. This materials and substances. research introduces a new design of electrolyzer with proper selection of electrode material and types integrated with magnetic field system, which can reduce the energy consumption. The effect of the optimum magnetic field strength was measured for this process with tap and distilled water. Two supplementary compounds, Sodium Hydroxide (NaOH) and Soda (NaHCO3), with concentration 3333ppm 1.5 litres of the electrolyte was used in this process.
    [Show full text]
  • The Effect of Magnetic Field on the Dynamics of Gas Bubbles in Water Electrolysis
    The Effect of Magnetic Field on the Dynamics of Gas Bubbles in Water Electrolysis Yan-Hom Li ( [email protected] ) Department of Mechanical and Aerospace Engineering, Chung-Cheng Institute of Technology, National Defense University, Taiwan Yen-Ju Chen Department of Mechanical and Aerospace Engineering, Chung-Cheng Institute of Technology, National Defense University, Taiwan Research Article Keywords: gas bubbles, platinum electrodes, magnetic eld result, downward Lorentz forces Posted Date: March 8th, 2021 DOI: https://doi.org/10.21203/rs.3.rs-283081/v1 License: This work is licensed under a Creative Commons Attribution 4.0 International License. Read Full License Version of Record: A version of this preprint was published at Scientic Reports on April 30th, 2021. See the published version at https://doi.org/10.1038/s41598-021-87947-9. The effect of magnetic field on the dynamics of gas bubbles in water electrolysis Yan-Hom Li1,2,*, Yen-Ju Chen 1,⸸ 1Department of Mechanical and Aerospace Engineering, Chung-Cheng Institute of Technology, National Defense University, Taoyuan, 335, Taiwan, 2System Engineering and Technology Program, National Yang Ming Chiao Tung University, Hsin-Chu, 300, Taiwan *corresponding. hom_li @hotmail.com ⸸these authors contributed equally to this work Abstract In this work, the movement of the gas bubbles evolved from the platinum electrodes in the influence of various magnetic field configurations are experimentally investigated. The oxygen and hydrogen bubbles respectively evolve from the surface of anode and cathode have distinctive behaviors in the presence of magnetic fields due to their paramagnetic and diamagnetic characteristics. The magnetic field perpendicular to the surface of the horizontal electrode induces the revolution of the bubbles.
    [Show full text]
  • Electrolysis of Salt Water
    ELECTROLYSIS OF SALT WATER Unit: Salinity Patterns & the Water Cycle l Grade Level: High school l Time Required: Two 45 min. periods l Content Standard: NSES Physical Science, properties and changes of properties in matter; atoms have measurable properties such as electrical charge. l Ocean Literacy Principle 1e: Most of of Earth's water (97%) is in the ocean. Seawater has unique properties: it is saline, its freezing point is slightly lower than fresh water, its density is slightly higher, its electrical conductivity is much higher, and it is slightly basic. Big Idea: Water is comprised of two elements – hydrogen (H) and oxygen (O). Distilled water is pure and free of salts; thus it is a very poor conductor of electricity. By adding ordinary table salt (NaCl) to distilled water, it becomes an electrolyte solution, able to conduct electricity. Key Concepts o Ionic compounds such as salt water, conduct electricity when they dissolve in water. o Ionic compounds consist of two or more ions that are held together by electrical attraction. One of the ions has a positive charge (called a "cation") and the other has a negative charge ("anion"). o Molecular compounds, such as water, are made of individual molecules that are bound together by shared electrons (i.e., covalent bonds). o Essential Questions o What happens to salt when it is dissolved in water? o What are electrolytes? o How can we determine the volume of dissolved ions in a water sample? o How are atoms held together in an element? Knowledge and Skills o Conduct an experiment to see that water can be split into its constituent ions through the process of electrolysis.
    [Show full text]
  • IAC-20,D1,3,5,X56351 Magnetic Buoyancy-Based Water Electrolysis
    71st International Astronautical Congress (IAC) – The CyberSpace Edition, 12-14 October 2020. Copyright c 2020 by the authors. Published by the IAF, with permission and released to the IAF to publish in all forms. IAC-20,D1,3,5,x56351 Magnetic buoyancy-based water electrolysis in zero-gravity A.´ Romero-Calvo1, G. Cano-Gomez´ 2, H. Schaub3 The management of fluids in space is complicated by the absence of strong buoyancy forces. This raises significant technical issues for two-phase flows applications, such as water electrolysis or boiling. Different approaches have been proposed and tested to induce phase separation in low-gravity; however, further efforts are still required to develop efficient, reliable, and safe devices. The employment of magnetic buoyancy is proposed as a complement or substitution of current methods, and as a way to induce the early detachment of gas bubbles from their nucleation surfaces. The governing magnetohydrodynamic equations describing incompressible two-phase flows subjected to static magnetic fields in low-gravity are presented, and numerical simulations are employed to demonstrate the reachability of current magnets under different configurations. The results support the employment of new-generation neodymium magnets for centimeter- scale electrolysis and phase separation technologies in space, that would benefit from reduced complexity, mass, and power requirements. 1 Introduction tive to moderate departures from the operational design point [20], and electric fields consume power and may represent a safety hazard The term water electrolysis refers to the electrically induced decom- for both human and autonomous spaceflight due to the large required position of water into oxygen and hydrogen.
    [Show full text]
  • Daily 40 No. – 12 Sir Humphrey Davy
    Daily 40 no. – 12 Sir Humphrey Davy Daily 40 Hall of Fame! Congratulations to these writers! Davy (1778-1829) was a British chemist and an inventor. He is best known for his discovery of sodium, calcium, potassium, barium, boron, and magnesium. He invented the Davy lamp, which enabled miners to use it in gas filled mines. He also worked with electrolysis which led him to many of his discoveries. -- Julia Sir Humphrey Davy (1778-1829) a British chemist, best known to be the father of electrolysis. Electrolysis is the process of electricity decomposing elements; with electrolysis he had discovered several alkaline earth metals, alkali metals, chlorine and salt. He also suggested that acid contained replaceable hydrogen, which was replaced by metals. --Denise Sir Humphrey Davy, an English chemist from 1778-1829, was the first to use electrolysis to isolate potassium, sodium, magnesium, calcium, strontium and barium. He also discovered boron and recognized chlorine and iodine as two elements. He analyzed many pigments and proved that diamond is a form of carbon. --Isaac Sir Humphrey Davy (1778-1829) was a British chemist and inventor. He discovered some alkali and alkali earth metals and helped discover chlorine and iodine. He was the first to state that atoms are held together by electrical forces and used electrolysis. He also invented the Davy lamp. --Alanna Sir Humphrey Davy was a British chemist. He discovered that atoms were held together by electrical forces and that electricity could decompose compounds through electrolysis. By decomposing compounds, he discovered Na, K, Mg, Ba, B, and Ca. he also discovered and promoted the use of NO2, laughing gas.
    [Show full text]
  • Simple Electrolysis Electrolysis of Water SCIENTIFIC
    Simple Electrolysis Electrolysis of Water SCIENTIFIC Concepts • Electrochemistry • Oxidation–reduction • Anode vs. cathode Background Electrochemistry is the study of the relationship between electrical forces and chemical reactions. There are two basic types of electrochemical processes. In a voltaic cell, commonly known as a battery, the chemical energy from a spontaneous oxidation–reduction reaction is converted into electrical energy. In an electrolytic cell, electricity from an external source is used to “force” a nonspontaneous chemical reaction to occur. What chemical reaction will take place when an electric current flows through water? The first electrochemical process to produce electricity was described in 1800 by the Italian scientist Alessandro Volta, a former high school teacher. Acting on the hypothesis that two dissimilar metals could serve as a source of electricity, Volta constructed a stacked pile of alternating silver and zinc plates separated by pads of absorbent material soaked in saltwater. When Volta moistened his fingers and repeatedly touched the top and bottom metal plates, he experienced a series of small electric shocks. The “voltaic pile,” as it came to be called, was the first battery—a chemical method of generating an electric current. Within months, William Nicholson and Anthony Carlisle in England attempted to confirm the production of electric charges on the upper and lower plates in a voltaic pile using an electroscope. In order to connect the plates to the electroscope, Nicholson and Carlisle added some water to the uppermost metal plate and inserted a wire to the electroscope. To their surprise, Nicholson and Carlisle observed the formation of a gas, which they identified as hydrogen.
    [Show full text]
  • Electrolysis of Water
    U.S. DEPARTMENT OF Energy Efficiency & ENERGY EDUCATION AND WORKFORCE DEVELOPMENT ENERGY Renewable Energy Electrolysis of Water Grades: 5-8 Topic: Hydrogen and Fuel Cells, Solar Owner: Florida Solar Energy Center This educational material is brought to you by the U.S. Department of Energy’s Office of Energy Efficiency and Renewable Energy. High-energy Hydrogen I Teacher Page Electrolysis of Water Student Objective The student: Key Words: • will be able to explain how hydrogen compound can be extracted from water electrolysis • will be able to explain how energy hydrogen flows through the electrolysis system molecule oxygen Materials: • photovoltaic cell (3V min) or 9-volt Time: battery (1 per group) 1 hour • piece of aluminum foil, approx. 6 cm x 10 cm (2 per group) • salt • electrical wires with alligator clips (2 per group) • beaker or small bowl (1 per group) • water • stirring rod or spoon • graduated cylinder (several per class) • Science Journal Background Information When you add salt to the water, the salt ions (which are highly polar) help pull the water molecules apart into ions. Each part of the water molecule (H2 O) has a charge. The OH- ion is negative, and the H+ ion is positive. This solution in water forms an electrolyte, allowing current to flow when a voltage is applied. The H+ ions, called cations, move toward the cathode (negative electrode), and the OH- ions, called anions, move toward the anode (positive electrode). Bubbles of oxygen gas (O2 ) form at the anode, and bubbles of hydrogen gas (H2 ) form at the cathode. The bubbles are easily seen.
    [Show full text]
  • Michael Faraday
    Michael Faraday The credit for generating electric current on a practical scale goes to the famous English scientist, Michael Faraday. Faraday was greatly interested in the invention of the electro- magnet, but his brilliant mind took earlier experiments still further. If electricity could produce magnetism, why couldn’t magnetism produce electricity? In 1831, Faraday found the solution. Electricity could be produced through magnetism by motion. He discovered that when a magnet was moved inside a coil of copper wire, a tiny electric current flows through the wire. He discovered, in essence, the first method of generating electricity by means of motion in a magnetic field, yet Otto Von Guericke made the first electrical machine, the frictional machine, by which a glass ball of sulphur became electrified by rotating rubber. Davy, who had the greatest influence on Faraday’s thinking, had shown in 1807 that the metals sodium and potassium can be precipitated from their compounds by an electric current, a process known as ELECTROLYSIS. Faraday’s vigorous pursuit of these experiments led in 1834 to what became known as Faraday’s laws of electrolysis. Faraday’s research into electricity and electrolysis was guided by the belief that electricity is only one of the many manifestations of the unified forces of nature, which included heat, light, magnetism, and chemical affinity. Although this idea was erroneous, it led him into the field of electromagnetism (see MAGNETISM), which was still in its infancy. In 1785, Charles Coulomb had been the first to demonstrate the manner in which electric charges repel one another, and it was not until 1820 that Hans Christian OERSTED and Andre Marie AMPERE discovered that an electric current produces a magnetic field.
    [Show full text]