GREEN GUIDE to YARD CARE Your Yard

Total Page:16

File Type:pdf, Size:1020Kb

GREEN GUIDE to YARD CARE Your Yard A GREEN GUIDE TO YARD CARE Your yard is the environment over which you have the most control. YardWise is a simple four-step program to help you maintain a healthy yard with less cost, less work, and less waste. TEXAS COMMISSION ON ENVIRONMENTAL QUALITY GI-028 (Rev. 2/08) Why “These heaps of garbage … YardWise? do you know what all this is? Many common yard care practices are out of balance It is the flowering meadow, it is with nature: the green grass, it is perfumed ♦ Every year more than 5 million tons of yard trimmings and other hay, it is golden corn, it is bread organic materials end up in Texas landfills instead of building up on your table, it is warm blood the soil. in your veins, it is health, ♦ Millions of gallons of city- treated water are used to it is joy, it is life ….” irrigate landscapes where native vegetation once grew in naturally —Victor Hugo mulched soil, sustained by rainfall. ♦ Much of that water runs off the land, eroding depleted and unprotected soils that are unable to absorb it. The excess sediment from your lawn and many other yards can smother aquatic life in the receiving bodies of water. Excess sediment can also increase the cost of operating water supply reservoirs. ♦ Costly synthetic fertilizers and pesticides are applied to compensate for the loss of nutrients and protection once provided by organic debris and rich soil life. Surprising as it may seem, residential users apply more pounds per acre of these chemicals than farmers do—often to the point of disrupting beneficial soil life. ♦ As your soil loses its organic matter, it allows more of these chemicals to run off and wash through it—contributing to the pollution of lakes, streams, and underground water. In excess, these pollutants can harm aquatic life or contaminate the food chain. These practices cost Texans millions of dollars every year: ♦ Disposing of organic materials in Texas landfills costs more than $150 million a year and consumes more than 15 million cubic yards of space. ♦ The extra water and chemicals used to sustain gardens and landscapes in depleted soil costs many more millions. ♦ It is difficult to put a price on the loss of water quality in Texas rivers, lakes, and aqui- fers. However, it is almost always less expensive to prevent pollution than to clean it up. As our population increases and home landscapes become a larger part of the Texas environment, it is more important than ever to manage them responsibly. Contents Watering Trees, Shrubs, Glossary ........................................................ iii and Ground Covers ................20 Drip Irrigation ...........................20 Grasscycling: “Don’t Bag It!” .........................1 Sprinkler Irrigation ....................20 Basics ...............................................1 Integrated Pest Grasscycling Benefits ................................1 Management (IPM) .......................21 Grasscycling Guidelines: Mowing ............1 Basics ......................................21 Grasscycling Guidelines: Watering ....2 Identify the Problem..................21 Grasscycling Guidelines: Fertilizing ...2 Know a Friend from a Foe .........21 Mulching .........................................................3 Use Appropriate Controls ..........21 Basics ...............................................3 Your Yard and Clean Air ..............................25 Mulching Benefits .............................3 Small Engines —Big Problems ..........25 Mulching Guidelines: Make the New Regulations— Best Use of Mulch Covers ...............3 Part of the Solution .......................25 Composting ...................................................4 Pollution Prevention in Basics ...............................................4 Your Own Back Yard .....................25 Compost Benefits ..............................4 Avoid Spilling Gasoline .............25 Two Compost Recipes........................5 Maintain Your Equipment ..........26 Cool and Easy Compost ..............5 Consider Cleaner Options .........26 Hot and Fast Compost .................6 Use Manual Tools .....................26 The Science of Composting ...............7 Reduce Mowing Time ...............26 Basics ........................................7 For More Information .................................27 A Balanced Diet of Carbon General ...........................................27 and Nitrogen (C:N) ..................7 Composting .....................................27 Adequate Moisture General Composting .................27 and Oxygen .............................8 Backyard Composting ...............27 The Right Particle Size .................8 Worm Composting A Healthy Temperature................9 (Vermicular) ..........................27 Typical Composting Systems ............12 Xeriscaping ......................................27 Piles: Open or Covered .............12 Integrated Pest Management ............27 Homemade Bins .......................12 Small Gasoline Equipment Manufactured Bins ....................13 for Lawns and Gardens .................27 Harvesting and Using Compost ........14 Sources ............................................27 When is Compost Ready? .........14 How to Harvest Compost ..........14 How to Use Compost ................14 Figures Worm Composting ..........................16 Figure 1. Recommended Kinds of Worms ........................16 Mowing Heights ....................................1 Materials for Compost Bin Illustrations ........................11 Worm Composting .................16 Figure 2. Desirable Compost Bin Containers for Features ...............................................13 Worm Composting .................16 Figure 3. Trench Composting ..................18 Steps to Establish a Worm Figure 4. Burying Food or Pet Wastes ......18 Composting Bin .....................17 Harvesting Worm Compost .......17 Tables Preventing Problems .................17 Table 1. Mulch Application Guide ...........3 Composting in the Ground ..............18 Table 2. Compost Pile Troubleshooting .....9 Green Landscape Design Table 3. Compost Pile Ingredients ...........10 and Yard Care .............................................19 Table 4. Comparison of Worm Basics .............................................19 Composting with Composting The Right Plants in in Large Piles .......................................16 the Right Places ............................19 Table 5. Selected Biological WaterWise .......................................20 Control Agents .....................................23 Basics ......................................20 Table 6. Selected Botanical Pesticides: Watering Lawns ........................20 Targets and Toxicity ..............................23 ii Glossary aerobic—having sufficient free oxygen to support respiration anaerobic—not having sufficient free oxygen to support respiration annual—a plant with a natural life span of one year or less botanical—derived from plant matter without chemical alteration “brown” materials—organic materials with a high carbon-to-nitrogen ratio such as dead leaves, dry hay, dry wood chips, and paper dripline—the ground directly below the farthest reach of a tree’s branches essential plant nutrients—elements that are necessary for the normal growth of plants “green” materials—organic materials with a low carbon-to-nitrogen ratio such as green grass clippings, vegetable trimmings, and fresh manure humus—the complex mixture of materials resulting from extensive decomposition of living things macronutrients—essential plant nutrients that are used in relatively large quantities: nitrogen, phosphorus, potassium, calcium, magnesium, and sulfur micronutrients—essential plant nutrients that are used in very small amounts: iron, manganese, copper, zinc, boron, molybdenum, chlorine, and cobalt microorganism—a living thing that is only visible through a microscope organic—consisting of residues from living things, including dead leaves and branches, grass clippings, manure, and the products of the natural decomposition of these residues organism—a living thing peat moss—a moss harvested from peat bogs and used as a soil amendment and as a component of potting soils perennial—a plant with a natural life span of more than two years pH—a measurement of the acidity or alkalinity of a material, on a scale from 0 (maximum acidity) to 14 (maximum alkalinity), with 7 representing neutral. synthetic fertilizer—a material containing manufactured essential plant nutrients synthetic pesticide—a material containing manufactured chemicals designed to kill pests toxicity—the ability of a substance to cause adverse effects (that is, to be toxic) in living organisms; a high toxicity means that very small amounts of the substance cause adverse effects iii B A S I C S Grasscycling: Grasscycling means leaving “Don’t Bag It!”* grass clippings on the lawn to encourages deep root decompose into soil. Grasscycling growth. ▼ Mow grass at the proper Guidelines: ♦ Mow often enough that height and disperse the Mowing each mowing removes no grass clippings down to The key to grasscycling is more than one-third of the the soil. to mow at the proper height grass blade; for example, if (see Figure 1) and disperse you set your cutting height ▼ Water grass only as the small grass clippings at 2 inches, then cut be- needed—about 1 inch of evenly so they fall down to fore the grass is more than water once a week. the soil. Mowing grass too 3 inches tall. ▼ Fertilize grass with slow- short causes stress, discour- ♦ Keep mower blades sharp
Recommended publications
  • Water Heater Formulas and Terminology
    More resources http://waterheatertimer.org/9-ways-to-save-with-water-heater.html http://waterheatertimer.org/Figure-Volts-Amps-Watts-for-water-heater.html http://waterheatertimer.org/pdf/Fundamentals-of-water-heating.pdf FORMULAS & FACTS BTU (British Thermal Unit) is the heat required to raise 1 pound of water 1°F 1 BTU = 252 cal = 0.252 kcal 1 cal = 4.187 Joules BTU X 1.055 = Kilo Joules BTU divided by 3,413 = Kilowatt (1 KW) FAHRENHEIT CENTIGRADE 32 0 41 5 To convert from Fahrenheit to Celsius: 60.8 16 (°F – 32) x 5/9 or .556 = °C. 120.2 49 140 60 180 82 212 100 One gallon of 120°F (49°C) water BTU output (Electric) = weighs approximately 8.25 pounds. BTU Input (Not exactly true due Pounds x .45359 = Kilogram to minimal flange heat loss.) Gallons x 3.7854 = Liters Capacity of a % of hot water = cylindrical tank (Mixed Water Temp. – Cold Water – 1⁄ 2 diameter (in inches) Temp.) divided by (Hot Water Temp. x 3.146 x length. (in inches) – Cold Water Temp.) Divide by 231 for gallons. % thermal efficiency = Doubling the diameter (GPH recovery X 8.25 X temp. rise X of a pipe will increase its flow 1.0) divided by BTU/H Input capacity (approximately) 5.3 times. BTU output (Gas) = GPH recovery x 8.25 x temp. rise x 1.0 FORMULAS & FACTS TEMP °F RISE STEEL COPPER Linear expansion of pipe 50° 0.38˝ 0.57˝ – in inches per 100 Ft. 100° .076˝ 1.14˝ 125° .092˝ 1.40˝ 150° 1.15˝ 1.75˝ Grain – 1 grain per gallon = 17.1 Parts Per million (measurement of water hardness) TC-092 FORMULAS & FACTS GPH (Gas) = One gallon of Propane gas contains (BTU/H Input X % Eff.) divided by about 91,250 BTU of heat.
    [Show full text]
  • How Does the Thermometer Work?
    How Does the Thermometer Work? How Does the Thermometer Work? A thermometer is a device that measures the temperature of things. The name is made up of two smaller words: "Thermo" means heat and "meter" means to measure. You can use a thermometer to tell the temperature outside or inside your house, inside your oven, even the temperature of your body if you're sick. One of the earliest inventors of a thermometer was probably Galileo. We know him more for his studies about the solar system and his "revolutionary" theory (back then) that the earth and planets rotated around the sun. Galileo is said to have used a device called a "thermoscope" around 1600 - that's 400 years ago!! The thermometers we use today are different than the ones Galileo may have used. There is usually a bulb at the base of the thermometer with a long glass tube stretching out the top. Early thermometers used water, but because water freezes there was no way to measure temperatures less than the freezing point of water. So, alcohol, which freezes at temperature below the point where water freezes, was used. The red colored or silver line in the middle of the thermometer moves up and down depending on the temperature. The thermometer measures temperatures in Fahrenheit, Celsius and another scale called Kelvin. Fahrenheit is used mostly in the United States, and most of the rest of the world uses Celsius. Kelvin is used by scientists. Fahrenheit is named after the German physicist Gabriel D. Fahrenheit who developed his scale in 1724.
    [Show full text]
  • Guide for the Use of the International System of Units (SI)
    Guide for the Use of the International System of Units (SI) m kg s cd SI mol K A NIST Special Publication 811 2008 Edition Ambler Thompson and Barry N. Taylor NIST Special Publication 811 2008 Edition Guide for the Use of the International System of Units (SI) Ambler Thompson Technology Services and Barry N. Taylor Physics Laboratory National Institute of Standards and Technology Gaithersburg, MD 20899 (Supersedes NIST Special Publication 811, 1995 Edition, April 1995) March 2008 U.S. Department of Commerce Carlos M. Gutierrez, Secretary National Institute of Standards and Technology James M. Turner, Acting Director National Institute of Standards and Technology Special Publication 811, 2008 Edition (Supersedes NIST Special Publication 811, April 1995 Edition) Natl. Inst. Stand. Technol. Spec. Publ. 811, 2008 Ed., 85 pages (March 2008; 2nd printing November 2008) CODEN: NSPUE3 Note on 2nd printing: This 2nd printing dated November 2008 of NIST SP811 corrects a number of minor typographical errors present in the 1st printing dated March 2008. Guide for the Use of the International System of Units (SI) Preface The International System of Units, universally abbreviated SI (from the French Le Système International d’Unités), is the modern metric system of measurement. Long the dominant measurement system used in science, the SI is becoming the dominant measurement system used in international commerce. The Omnibus Trade and Competitiveness Act of August 1988 [Public Law (PL) 100-418] changed the name of the National Bureau of Standards (NBS) to the National Institute of Standards and Technology (NIST) and gave to NIST the added task of helping U.S.
    [Show full text]
  • Multidisciplinary Design Project Engineering Dictionary Version 0.0.2
    Multidisciplinary Design Project Engineering Dictionary Version 0.0.2 February 15, 2006 . DRAFT Cambridge-MIT Institute Multidisciplinary Design Project This Dictionary/Glossary of Engineering terms has been compiled to compliment the work developed as part of the Multi-disciplinary Design Project (MDP), which is a programme to develop teaching material and kits to aid the running of mechtronics projects in Universities and Schools. The project is being carried out with support from the Cambridge-MIT Institute undergraduate teaching programe. For more information about the project please visit the MDP website at http://www-mdp.eng.cam.ac.uk or contact Dr. Peter Long Prof. Alex Slocum Cambridge University Engineering Department Massachusetts Institute of Technology Trumpington Street, 77 Massachusetts Ave. Cambridge. Cambridge MA 02139-4307 CB2 1PZ. USA e-mail: [email protected] e-mail: [email protected] tel: +44 (0) 1223 332779 tel: +1 617 253 0012 For information about the CMI initiative please see Cambridge-MIT Institute website :- http://www.cambridge-mit.org CMI CMI, University of Cambridge Massachusetts Institute of Technology 10 Miller’s Yard, 77 Massachusetts Ave. Mill Lane, Cambridge MA 02139-4307 Cambridge. CB2 1RQ. USA tel: +44 (0) 1223 327207 tel. +1 617 253 7732 fax: +44 (0) 1223 765891 fax. +1 617 258 8539 . DRAFT 2 CMI-MDP Programme 1 Introduction This dictionary/glossary has not been developed as a definative work but as a useful reference book for engi- neering students to search when looking for the meaning of a word/phrase. It has been compiled from a number of existing glossaries together with a number of local additions.
    [Show full text]
  • Temperature Scales (Celsius Vs Fahrenheit)
    TEMPERATURE SCALES (CELSIUS VS FAHRENHEIT) The Celsius (also known as centigrade) temperature scale is the overwhelmingly popular scale around the world. Americans are really the only folks stubborn enough to hang on to our old habits. Anders Celsius, (1701 – 1744) born in Uppsala Sweden, was one of a large number of scientists (all related) originating from Ovanåker in the province of Hälsingland. The family name is a latinised version of the name of the vicarage (Högen). His grandfathers were both professors in Uppsala: Magnus Celsius the mathematician and Anders Spole the astronomer. His father, Nils Celsius, was also professor in astronomy. Celsius, who was said to have been very talented in mathematics from an early age, was appointed professor of astronomy in 1730. For his metereological observations he constructed his world famous Celsius thermometer, with 0 for the boiling point of water and 100 for the freezing point. After his death in 1744 the scale was reversed to its present form. http://www.astro.uu.se/history/Celsius_eng.html What can be considered the first modern thermometer, the mercury thermometer with a standardized scale, was invented by Daniel Gabriel Fahrenheit (1686-1736) in 1714. The Fahrenheit scale divided the freezing and boiling points of water into 180 degrees. 32°F was the freezing p0int of water and 212°F was the boiling point of water. 0°F was based on the temperature of an equal mixture of water, ice, and salt. Daniel Fahrenheit based his temperature scale on the temperature of the human body. Originally, the human body temperature was 100° F on the Fahrenheit scale, but it has since been adjusted to 98.6°F.
    [Show full text]
  • Metric System Conversion Factors1 J
    AGR39 Metric System Conversion Factors1 J. Bryan Unruh, Barry J. Brecke, and Ramon G. Leon-Gonzalez2 Area Equivalents 1 Hectare (ha) 2 1 Acre (A) = 10,000 square meters (m ) 2 = 100 are (a) = 43,560 square feet (ft ) = 2.471 acres (A) = 4,840 square yards (yd2) = 0.405 hectares (ha) 1 Square Foot (ft) = 160 square rods (rd2) 2 = 4,047 square meters (m2) = 144 square inches (in ) = 929.03 square centimeters (cm2) 2 1 Acre-inch (ac-in) = 0.0929 square meters (m ) 3 = 102.8 cubic meters (m ) 1 Square Mile (mi) = 27,154 gallons, US (gal) 2 = 3,630 cubic feet (ft3) = 27,878,400 square feet (ft ) = 3,097,600 square yards (yd2) 2 1 Are (a) = 640 square acres (A ) = 2,589,988.11 square meters (m2) = 100 square meters (m2) 2 = 119.6 square yards (yd ) 1 Square Rod (rd) = 0.025 acre (A) = 39,204 square inches (in2) = 272.25 square feet (ft2) 1 Cubic Foot (ft) 2 3 = 30.25 square yards (yds ) = 1,728 cubic inches (in ) = 25.3 square meters (m2) = 0.037 cubic yards (yds3) 3 = 0.02832 cubic meters (cm ) 1 Square Yard (yd) = 28,320 cubic centimeters (cm3) = 9 square feet (ft2) 2 1 Cubic Yard (yd) = 0.836 square meters (m ) = 27 cubic feet (ft3) = 0.764 cubic meters (m3) 1. This document is AGR39, one of a series of the Environmental Horticulture Department, UF/IFAS Extension. Original publication date November 1993. Revised December 2014. Reviewed December 2017. Visit the EDIS website at http://edis.ifas.ufl.edu.
    [Show full text]
  • Enghandbook.Pdf
    785.392.3017 FAX 785.392.2845 Box 232, Exit 49 G.L. Huyett Expy Minneapolis, KS 67467 ENGINEERING HANDBOOK TECHNICAL INFORMATION STEELMAKING Basic descriptions of making carbon, alloy, stainless, and tool steel p. 4. METALS & ALLOYS Carbon grades, types, and numbering systems; glossary p. 13. Identification factors and composition standards p. 27. CHEMICAL CONTENT This document and the information contained herein is not Quenching, hardening, and other thermal modifications p. 30. HEAT TREATMENT a design standard, design guide or otherwise, but is here TESTING THE HARDNESS OF METALS Types and comparisons; glossary p. 34. solely for the convenience of our customers. For more Comparisons of ductility, stresses; glossary p.41. design assistance MECHANICAL PROPERTIES OF METAL contact our plant or consult the Machinery G.L. Huyett’s distinct capabilities; glossary p. 53. Handbook, published MANUFACTURING PROCESSES by Industrial Press Inc., New York. COATING, PLATING & THE COLORING OF METALS Finishes p. 81. CONVERSION CHARTS Imperial and metric p. 84. 1 TABLE OF CONTENTS Introduction 3 Steelmaking 4 Metals and Alloys 13 Designations for Chemical Content 27 Designations for Heat Treatment 30 Testing the Hardness of Metals 34 Mechanical Properties of Metal 41 Manufacturing Processes 53 Manufacturing Glossary 57 Conversion Coating, Plating, and the Coloring of Metals 81 Conversion Charts 84 Links and Related Sites 89 Index 90 Box 232 • Exit 49 G.L. Huyett Expressway • Minneapolis, Kansas 67467 785-392-3017 • Fax 785-392-2845 • [email protected] • www.huyett.com INTRODUCTION & ACKNOWLEDGMENTS This document was created based on research and experience of Huyett staff. Invaluable technical information, including statistical data contained in the tables, is from the 26th Edition Machinery Handbook, copyrighted and published in 2000 by Industrial Press, Inc.
    [Show full text]
  • Thermometer ×
    This website would like to remind you: Your browser (Apple Safari 4) is out of date. Update your browser for more × security, comfort and the best experience on this site. Encyclopedic Entry thermometer For the complete encyclopedic entry with media resources, visit: http://education.nationalgeographic.com/encyclopedia/thermometer/ A thermometer is an instrument that measures temperature. It can measure the temperature of a solid such as food, a liquid such as water, or a gas such as air. The three most common units of measurement for temperature are Celsius, Fahrenheit, and kelvin. The Celsius scale is part of the metric system. The metric system of measurement also includes units of mass, such as kilograms, and units of length, such as kilometers. The metric system, including Celsius, is the official system of measurement for almost all countries in the world. Most scientific fields measure temperature using the Celsius scale. Zero degrees Celsius is the freezing point of water, and 100 degrees Celsius is the boiling point of water. Three nations do not use the Celsius scale. The United States, Burma, and Liberia use the Fahrenheit scale to measure temperature. However, even in these countries, scientists use the Celsius or kelvin scale to measure temperature. Water freezes at 32 degrees Fahrenheit and boils at 212 degrees Fahrenheit. The Kelvin scale is used by physicists and other scientists who need to record very precise temperatures. The kelvin scale is the only unit of measurement to include the temperature for "absolute zero," the total absence of any heat energy. This makes the kelvin scale essential to scientists who calculate the temperature of objects in the cold reaches of outer space.
    [Show full text]
  • The International System of Units (SI) - Conversion Factors For
    NIST Special Publication 1038 The International System of Units (SI) – Conversion Factors for General Use Kenneth Butcher Linda Crown Elizabeth J. Gentry Weights and Measures Division Technology Services NIST Special Publication 1038 The International System of Units (SI) - Conversion Factors for General Use Editors: Kenneth S. Butcher Linda D. Crown Elizabeth J. Gentry Weights and Measures Division Carol Hockert, Chief Weights and Measures Division Technology Services National Institute of Standards and Technology May 2006 U.S. Department of Commerce Carlo M. Gutierrez, Secretary Technology Administration Robert Cresanti, Under Secretary of Commerce for Technology National Institute of Standards and Technology William Jeffrey, Director Certain commercial entities, equipment, or materials may be identified in this document in order to describe an experimental procedure or concept adequately. Such identification is not intended to imply recommendation or endorsement by the National Institute of Standards and Technology, nor is it intended to imply that the entities, materials, or equipment are necessarily the best available for the purpose. National Institute of Standards and Technology Special Publications 1038 Natl. Inst. Stand. Technol. Spec. Pub. 1038, 24 pages (May 2006) Available through NIST Weights and Measures Division STOP 2600 Gaithersburg, MD 20899-2600 Phone: (301) 975-4004 — Fax: (301) 926-0647 Internet: www.nist.gov/owm or www.nist.gov/metric TABLE OF CONTENTS FOREWORD.................................................................................................................................................................v
    [Show full text]
  • Fahrenheit™ Herbicide
    GROUP 2 4 HERBICIDES Fahrenheit™ Herbicide Fahrenheit™ is a 38% water soluble granule herbicide for the control of broadleaf and grassy weeds in labeled warm-season turfgrasses. ACTIVE INGREDIENTS: Potassium salt of Dicamba: ............................................................................ 33.00% Metsulfuron-methyl: ........................................................................................ 5.00% OTHER INGREDIENTS: .................................................................................... 62.00% TOTAL: ....................................................................................................... 100.00% KEEP OUT OF REACH OF CHILDREN WARNING/AVISO Si usted no entiende la etiqueta, busque a alguien para que se la explique a usted en detale. (If you do not understand the label, find someone to explain it to you in detail.) FIRST AID IF IN EYES: • Hold eye open and rinse slowly and gently with water for 15-20 minutes. • Remove contact lenses, if present, after the first 5 minutes, then continue rinsing eye. • Call a poison control center or doctor for treatment advice. IF • Immediately call a poison control center or doctor for treatment SWALLOWED: advice. • Do not induce vomiting unless told to do so by a poison control center or doctor. • Have person sip a glass of water if able to swallow. • Do not give anything by mouth to an unconscious person. HOT LINE NUMBER Have the product container or label with you when calling a poison control center or doctor or going for treatment. You may also contact SafetyCall® International (866) 897-8050 for emergency medical treatment information. Manufactured for: EPA Reg. No: 53883-387 Control Solutions, Inc. EPA Est. No: 53883-TX-002 5903 Genoa Red Bluff Net Contents: 6 ounce Pasadena, TX 77507 EPA 122916 PRECAUTIONARY STATEMENTS HAZARDS TO HUMANS AND DOMESTIC ANIMALS WARNING: Causes substantial but temporary eye injury.
    [Show full text]
  • Department of Revenue Services Subject Tables of Equivalents for Natural Gas and Propane for Motor Vehicle Fuels Tax Purposes Section § 12-455A-1
    Regulations of Connecticut State Agencies TITLE 12. Taxation Agency Department of Revenue Services Subject Tables of Equivalents for Natural Gas and Propane for Motor Vehicle Fuels Tax Purposes Section § 12-455a-1 CONTENTS Sec. 12-455a-1. Computation of tax on motor vehicle fuels in gaseous form Revised: 2015-3-6 R.C.S.A. § 12-455a-1 - I- Regulations of Connecticut State Agencies TITLE 12. Taxation Department of Revenue Services §12-455a-1 Tables of Equivalents for Natural Gas and Propane for Motor Vehicle Fuels Tax Purposes Sec. 12-455a-1. Computation of tax on motor vehicle fuels in gaseous form (a) Definitions . As used in this section of the Regulations of Connecticut State Agencies: (1) “British Thermal Unit” (Btu) means an amount of heat required to raise the temperature of one pound of water one degree Fahrenheit; (2) “Cubic foot” means a standard unit of gas measurement and is defined as the amount of gas occupying a cubic foot of space at a pressure of 30 inches of mercury (approximately 14.7 psi) and a temperature of 60 degrees Fahrenheit; (3) “Fuels” includes natural gas and propane, as well as other fuels in gaseous form suitable for the generation of power to propel motor vehicles; (4) “Gallon” means a measure of volume equivalent to 231 cubic inches. When used as a standard unit of measure for liquid natural gas and other liquid fuels, it refers to a gallon of liquid fuel at a temperature of 60 degrees Fahrenheit; (5) “Natural gas” means naturally occurring mixtures of hydrocarbon gases and vapors consisting principally of methane, whether in gaseous or liquid form; (6) “Propane” means a gaseous paraffin hydrocarbon, which becomes liquid under pressure or reduced temperatures; (7) “Psi” means pounds of pressure per square inch.
    [Show full text]
  • Engineering: an Introduction for High School
    CK-12 FOUNDATION Engineering: An Introduction for High School BakerGaneshGaneshKrauseMorrellRoberts CK-12 Foundation is a non-profit organization with a mission to reduce the cost of textbook materials for the K-12 market both in the U.S. and worldwide. Using an open-content, web- based collaborative model termed the “FlexBook,” CK-12 intends to pioneer the generation and distribution of high-quality educational content that will serve both as core text as well as provide an adaptive environment for learning. Copyright © 2010 CK-12 Foundation, www.ck12.org Except as otherwise noted, all CK-12 Content (including CK-12 Curriculum Material) is made available to Users in accordance with the Creative Commons Attribution/Non- Commercial/Share Alike 3.0 Unported (CC-by-NC-SA) License (http://creativecommons. org/licenses/by-nc-sa/3.0/), as amended and updated by Creative Commons from time to time (the “CC License”), which is incorporated herein by this reference. Specific details can be found at http://about.ck12.org/terms. Printed: July 27, 2010 Authors Dale Baker, Annapurna Ganesh, Tirupalavanam G. Ganesh, Stephen Krause, Darryl Morrell, Chell Roberts, Janel White-Taylor i www.ck12.org Contents 1 Nature of Engineering 1 2 Nature of Engineering 3 2.1 About This Chapter ............................... 3 2.2 Discovering Engineering ............................. 3 2.3 What Makes an Engineer? ........................... 10 2.4 The Global and Societal Impact of Engineering ................ 22 2.5 Conclusion .................................... 35 2.6 Vocabulary .................................... 36 2.7 References .................................... 36 2.8 Student Supplemental Resources ........................ 37 2.9 Instructor Supplemental Resources ....................... 46 3 Engineering & Society 49 3.1 About This Chapter ..............................
    [Show full text]