DOCSLIB.ORG

Teta Fare Collection System

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Teta Fare Collection System Automated fare collection (AFC) system is the collection of hardware and software components that automates the ticketing system of the public transportation network. For long years ticketing at city public transport has been done manually. AFC brings speed, economy, and security to the ticketing procedure, while it is usually a part of a Smart City platform. A Smart city is a concept for urban areas that uses the same smartcard for different types of applications where all systems are either managed or controlled by a centralized computer network. This includes data collection and control from several public utilities like public transport fare collection, parking lots, taxi, pay roads, highway toll collection, shuttles management, gas & electric charges , museum fees, national park entrance fees, access control to entertainment halls, sports, theatres and much more ... System collects data from applications, citizens, devices, and assets. The consolidated information can be processed and analyzed at the city management to optimize the efficiency of the city operations and services. Description of the AFC system The Fare collection system consists of following components: Cards & tickets Validators & POS terminals- Devices to read/write media Passenger information – Mobile app’s and onboard bus displays Turnstiles for metro and closed bus stations Depot/station computers Back office systems Central clearing house Cards and Tickets The cards have a smart chip inside which works with the radio power supplied by the readers and validators. The card can be used for private and public utilities for payment applications like bus fare collection, parking lots payment , taxi, pay roads, highway toll collection etc. Apart from payment, the cards can be used for other applications like access control to entertainment halls, sports, theatres and much more ... MIFARE Classic MIFARE Classic started a revolution in the contactless smart card business at 1994. Today, the card is used in a variety of applications worldwide. Almost 10 billion mifare cards are used up till now. The solutions provide excellent robustness, easy handling, RF performance and optimized usage MIFARE Ultralight MIFARE® Ultralight-based tickets offer an ideal solution for low-cost, high-volume applications such as public transport, loyalty cards and event ticketing. They serve as a perfect contactless replacement for magnetic stripe, barcode, or QR-code systems. The introduction of the contactless MIFARE Ultralight for limited-use applications can lead to reduced system installation and maintenance costs. MIFARE Plus Migrate contactless smart card systems to the next security level. MIFARE Plus® brings system up to benchmark AES security with Common Criteria Certification EAL4+. After personalization, MIFARE Plus uses its “backward compatible mode” to behave like MIFARE Classic. MIFARE DESFire Based on open global standards for both RF interface and cryptographic methods, MIFARE DESFire product family provides highly secure microcontroller-based cards. Its name DESFire references the use of DES, 2K3DES, 3K3DES, and AES hardware cryptographic engines for securing transmission data. MIFARE DESFire products enable multi-application smart card solutions for identity, access control, loyalty, and micropayment applications, as well as in transport schemes Validators and POS Terminals V8 Validator features Manufactured for traveler ticket validation on bus and train. Suitable for related circumstances on bus. Resistance to dust, water, and electromagnetic interference Manufactured against shock and vibration Regulator for stable power supply, voltage overload protection Advanced Linux operating system, High-definition LCD display Preload voice prompts, supports different recorded voice prompts Mifare cards supported GPS positioning Optional output for connecting thermal slip printer 10 years data retention Blacklist checking capability V8 Bus validator V7 Bus validator BSM-11 Card loader features Mobile terminal with rechargeable battery Can be used as desktop and mobile Touchscreen keypad with function and numeric keys Thermal ticket printer to issue slip for each card loading transaction The previous credit, loaded credit, and the new card balance is written on ticket Technical specifications ARM7 Processor 64Mb Flash, 4MB RAM Memory Thermal graphic printer Contactless card reader, ISO14443 Type A, Mifare 2 SAM Slots, ISO7816, 1 SIM Slot BSM-11 Card reloader GPRS Communications , Mini-USB Audio buzzer Lithium Polymer rechargeable battery CE, RoHS Passenger information Mobile app’s and onboard bus displays The Passenger Information System takes the GPS location information of the busses from the validators. The central software evaluates the received data and transfers the calculated information to passengers in real time, over mobile apps, on-board screens, and bus stop monitors. Passengers can take relevant information any time by using their mobile phones by downloading the free application on IOS and Android shops. Passengers in the bus, can see the current position of the bus on the route and the name of bus stations that the bus will arrive. The information displays are mounted at the ceiling and the information can be monitored by the passengers from a distance up to 10 meters. Outdoor information systems can be installed at central stations, city centers metro stations and bus stops. Each information system contains a powerful industrial computer system connected to a LED monitor that is capable to display at outdoor light conditions. The info system is connected to the system server over the GPRS or 3G wireless GSM data network. The system is capable of displaying real time information to passengers at bus stops. People can monitor the departure and arrival times of busses, type of vehicles, map view of the present bus location, and possible arriving time to the bus stop. Automatic vehicle management and fare collection systems are used in conjunction to present the service to passengers. The On-Board Passenger Information display is capable of giving audio verbal info to passengers besides the visual text information. Self-service card reload stations Payment with cash and credit card Figure 1 : General system topology for fare collection system The passengers can reload credit to their cards at manual cashiers or automatic pay stations. Self-service pay stations have the advantage of working 7/24 without any break. This gives an economic advantage to automatic stations compared to manual cashiers which needs at least 4 persons to be hired for each station. Fare collection system uses radio frequency contactless cards and tickets as payment method. The contactless tickets are not reloadable and can be used for limited number of rides. For example, if the purchased ticket is a 5-ride ticket, the ticket can be used for only two rides and need to throw away after this. But smartcards can be used by reloading credit every time it is needed. For frequent users, purchasing a smartcard is more logical than using smart tickets as the cost of a ticket per ride is always higher than a smartcard user who frequently use the transit system. TK-2500 Series payment kiosks Easy to use card loading Fast and reliable High contrast LCD display for user instructions Touchscreen operation Read/Write unit for card loading and reading Step-by-step navigation through the process Steel housing Self-filling coin recycler Recycling coin unit with 5 self-refilling hoppers Bill validator and self-filling recycler with stacker safe (600 bills) Thermal paper receipt printer Peripheral control unit Regulated switch mode power Supply Heating unit with thermostat control Intercom call button and loudspeaker coin return tray stand-alone operation Payment to load credit on card using coins, bills Change by coins and/or bills Option : ticket dispenser, it is possible to take prepaid tickets At each operation the loaded amount, card balance and place of issue is printed on the receipt issued for payment TK-2300 Series payment kiosks Easy to use card loading Fast and reliable High contrast LCD display for user instructions Touchscreen operation Read/Write unit for card loading and reading Step-by-step navigation through the process Steel housing Credit card and debit card POS terminal No need to collect and fill banknotes and coins LED lamp for POS terminal Card + pin operation Thermal paper receipt printer Peripheral control unit Regulated switch mode power Supply Heating unit with thermostat control Intercom call soft button and loudspeaker On-line operation Payment to load credit on card using bank cards only At each operation the loaded amount, card balance and place of issue is printed on the receipt issued for payment Turnstiles and gates for bus & metro stations Rugged and strong body manufactured for transit Heater for outdoor applications Tripod and flap gate turnstiles Suitable for V series validators Card reader is integrated with turnstile controller Unlock Time: 0.2 second Pass rate: 35 person/min approximately Pass width: less then 550mm Regulated power supply with line protection Environmental conditions : For outdoor tripod turnstiles : -30 to +70º Celsius For indoor flap gate turnstiles : -15 to 60º Celsius 2368 sok, No 4, Eskişehir yolu, Etimesgut, 06790 Ankara Tel : +90 312 234 1716 Pbx , Fax : +90 312 234 1778 www.teta.com.tr [email protected] .
Load more

Recommended publications
  • Smart Card Readers 2021/S 093-245130 Contract Notice
    OJ/S S93 14/05/2021 1 / 4 245130-2021-EN This notice in TED website: https://ted.europa.eu/udl?uri=TED:NOTICE:245130-2021:TEXT:EN:HTML Finland-HSL: Smart card readers 2021/S 093-245130 Contract notice – utilities Supplies Legal Basis: Directive 2014/25/EU Section I: Contracting entity I.1) Name and addresses Official name: Helsingin Seudun Liikenne — kuntayhtymä National registration number: 2274586-3 Postal address: Opastinsilta 6A, PL 100 Town: HSL NUTS code: FI1B Helsinki-Uusimaa Postal code: 00077 Country: Finland E-mail: [email protected] Internet address(es): Main address: http://www.hsl.fi I.3) Communication The procurement documents are available for unrestricted and full direct access, free of charge, at: https:// tarjouspalvelu.fi/hsl?id=335313&tpk=3f2f9827-c11f-4bcc-b4f1-d3b63cdeef62 Additional information can be obtained from the abovementioned address Tenders or requests to participate must be submitted electronically via: https://tarjouspalvelu.fi/hsl? id=335313&tpk=3f2f9827-c11f-4bcc-b4f1-d3b63cdeef62 I.6) Main activity Urban railway, tramway, trolleybus or bus services Section II: Object II.1) Scope of the procurement II.1.1) Title: Contactless validator Reference number: 71/02.08.00/2021 II.1.2) Main CPV code 30233300 Smart card readers II.1.3) Type of contract Supplies II.1.4) Short description: Helsinki regional transport authority (HSL) is looking to procure contactless validators, which are capable of reading and updating ISO 14443 A/B contactless travel cards (such as currently used Mifare DESFire travel cards and Mifare Ultralight single charged cards), reading 1D/2D bar codes and QR codes from mobile applications and paper tickets, and reading contactless EMV cards and support pinless contactless payments 14/05/2021 S93 1 / 4 https://ted.europa.eu/TED OJ/S S93 14/05/2021 2 / 4 245130-2021-EN in transit (Visa and Mastercard MTT rules).
    [Show full text]
  • Mobility Payment Integration: State-Of-The-Practice Scan
    Mobility Payment Integration: State-of-the-Practice Scan OCTOBER 2019 FTA Report No. 0143 Federal Transit Administration PREPARED BY Ingrid Bartinique and Joshua Hassol Volpe National Transportation Systems Center COVER PHOTO Courtesy of Edwin Adilson Rodriguez, Federal Transit Administration DISCLAIMER This document is disseminated under the sponsorship of the U.S. Department of Transportation in the interest of information exchange. The United States Government assumes no liability for its contents or use thereof. The United States Government does not endorse products or manufacturers. Trade or manufacturers’ names appear herein solely because they are considered essential to the objective of this report. Mobility Payment Integration: State-of-the- Practice Scan OCTOBER 2019 FTA Report No. 0143 PREPARED BY Ingrid Bartinique and Joshua Hassol Volpe National Transportation Systems Center 55 Broadway, Kendall Square Cambridge, MA 02142 SPONSORED BY Federal Transit Administration Office of Research, Demonstration and Innovation U.S. Department of Transportation 1200 New Jersey Avenue, SE Washington, DC 20590 AVAILABLE ONLINE https://www.transit.dot.gov/about/research-innovation FEDERAL TRANSIT ADMINISTRATION i FEDERAL TRANSIT ADMINISTRATION i Metric Conversion Table SYMBOL WHEN YOU KNOW MULTIPLY BY TO FIND SYMBOL LENGTH in inches 25.4 millimeters mm ft feet 0.305 meters m yd yards 0.914 meters m mi miles 1.61 kilometers km VOLUME fl oz fluid ounces 29.57 milliliters mL gal gallons 3.785 liter L ft3 cubic feet 0.028 cubic meters m3 yd3 cubic yards 0.765 cubic meters m3 NOTE: volumes greater than 1000 L shall be shown in m3 MASS oz ounces 28.35 grams g lb pounds 0.454 kilograms kg megagrams T short tons (2000 lb) 0.907 Mg (or “t”) (or “metric ton”) TEMPERATURE (exact degrees) o 5 (F-32)/9 o F Fahrenheit Celsius C or (F-32)/1.8 FEDERAL TRANSIT ADMINISTRATION i FEDERAL TRANSIT ADMINISTRATION ii REPORT DOCUMENTATION PAGE Form Approved OMB No.
    [Show full text]
  • Tcrp Report 94
    TRANSIT COOPERATIVE RESEARCH TCRP PROGRAM REPORT 94 Sponsored by the Federal Transit Administration Fare Policies, Structures and Technologies: Update TCRP OVERSIGHT AND PROJECT TRANSPORTATION RESEARCH BOARD EXECUTIVE COMMITTEE 2003 (Membership as of March 2003) SELECTION COMMITTEE (as of October 2002) OFFICERS CHAIR Chair: Genevieve Giuliano, Director and Prof., School of Policy, Planning, and Development, USC, Los Angeles J. BARRY BARKER Vice Chair: Michael S. Townes, Exec. Dir., Transportation District Commission of Hampton Roads, Hampton, VA Transit Authority of River City Executive Director: Robert E. Skinner, Jr., Transportation Research Board MEMBERS DANNY ALVAREZ MEMBERS Miami-Dade Transit Agency KAREN ANTION MICHAEL W. BEHRENS, Executive Director, Texas DOT Karen Antion Consulting JOSEPH H. BOARDMAN, Commissioner, New York State DOT GORDON AOYAGI SARAH C. CAMPBELL, President, TransManagement, Inc., Washington, DC Montgomery County Government E. DEAN CARLSON, Secretary of Transportation, Kansas DOT JEAN PAUL BAILLY JOANNE F. CASEY, President, Intermodal Association of North America Union Internationale des Transports Publics JAMES C. CODELL III, Secretary, Kentucky Transportation Cabinet RONALD L. BARNES JOHN L. CRAIG, Director, Nebraska Department of Roads Central Ohio Transit Authority BERNARD S. GROSECLOSE, JR., President and CEO, South Carolina State Ports Authority LINDA J. BOHLINGER SUSAN HANSON, Landry University Prof. of Geography, Graduate School of Geography, Clark University HNTB Corp. LESTER A. HOEL, L. A. Lacy Distinguished Professor, Depart. of Civil Engineering, University of Virginia ANDREW BONDS, JR. HENRY L. HUNGERBEELER, Director, Missouri DOT Parsons Transportation Group, Inc. JENNIFER L. DORN ADIB K. KANAFANI, Cahill Prof. and Chair, Dept. of Civil and Environmental Engineering, University of FTA California at Berkeley NATHANIEL P.
    [Show full text]
  • NFC/RFID Token Security. Case Study: Estonian Public Transportation Cards
    NFC/RFID token security. Case study: Estonian public transportation cards Yauhen Yakimenka Supervised by Jan Willemson December 17, 2016 Abstract This report, prepared for the course Research Seminar in Cryptogra- phy, talks about security of NFC/RFID cards. It first describes the most widely-used type of cards, MIFARE Classic, and then considers a real-life application, namely Estonian public transportation cards. The commu- nication between a real card reader installed in Tartu bus and a Tallinn public transportation card is eavesdropped and analysed on high level. 1 Introduction Radio frequency identification (RFID) cards is a pervasive technology nowadays. More and more systems adopted this technology as replacement for barcodes, magnetic stripe cards and paper tickets for a variety of applications. Contactless cards consist of a small piece of memory that can be accessed wirelessly. Some of them can also have some computing capabilities. RFID cards are of two main classes, low-frequency and high-frequency. The former operates on 125kHz frequency range and do not any cryptographic ca- pabilities. In fact, they can be seen as radio-frequency analogue of bar codes: a card simply transmits pre-coded information. Cards operating on a 13.56GHz frequency range (also known as Near-Field Communication (NFC) cards) can be made to implement more sophisticated protocols. We further talk about one particular type of such cards, MIFARE Classic. 2 MIFARE Classic cards MIFARE Classic is perhaps the most widely used type of high-frequency cards. They were introduce in 1995 by NXP (formerly Philips). The logical structure of MIFARE Classic is shown in Figure 1.1 The card is in principle a memory card with few extra functionalities (read, write, increment and decrement).
    [Show full text]
  • Card-Only Attacks on Mifare Classic Or How to Steal Your Oyster Card and Break Into Buildings Worldwide
    Card-Only Attacks on MiFare Classic or How to Steal Your Oyster Card and Break into Buildings Worldwide Nicolas T. Courtois University College London , UK Better Card-only Attacks on Mifare Classic Slides I will cover only 50% and skip the technical parts. Full version: Google “UCL CS Courtois” These slides: www.nicolascourtois.com/papers/mifare_all.pdf My paper: SECRYPT 2009, see also eprint.iacr.org/2009/137/ Hack it at home: step by step instructions: http://www.nicolascourtois.com/MifareClassicHack.pdf 2 Nicolas T. Courtois, 2009 Better Card-only Attacks on Mifare Classic Outline 1. Security in the Smart Card world: • Traditional model vs. disruptive RFID technology • Open vs. Close source models 2. MiFare Crypto 1 cipher: waste of silicon x more than 1 billion copies sold. 3. Barriers to breach: • The need for hacking and reverse engineering • Hardware set-up 4. Early attacks 5. Card-only attacks [NEW] • My own • Dutch researchers from Nijmegen • Combined 6. Inside Oyster Cards + other countries… 7. Who is to blame? 3 Nicolas T. Courtois, 2009 **About Our Job Better Card-only Attacks on Mifare Classic **Key Question: Is actively researching serious security vulnerabilities socially desirable? - Of Course Yes! …will tell you every professional hacker and every academic code-breaker… 5 Nicolas T. Courtois, 2009 Better Card-only Attacks on Mifare Classic **Bruce Schneier [14 May 2008]: Problem: A hacker who discovers one [attack] can sell it on the black market, blackmail the vendor with disclosure, or simply publish it without regard to the consequences. Q: […] is it ethical to research new vulnerabilities? A: Unequivocally, yes.
    [Show full text]
  • Security Analysis of Near-Field Communication (NFC) Payments
    Security Analysis of Near-Field Communication (NFC) Payments Dennis Giese, Kevin Liu, Michael Sun, Tahin Syed, Linda Zhang May 16, 2018 Abstract Near-Field Communication (NFC) is a modern technology for short range communication with a variety of applications ranging from physical access control to contactless payments. These applications are often heralded as being more secure, as they require close physical proximity and do not involve Wi-Fi or mobile networks. However, these systems are still vulnerable to security attacks at the time of transaction, as they require little to no additional authentication from the user’s end. In this paper, we propose a method to attack mobile-based NFC payment methods and make payments at locations far away from where the attack occurs. We evaluate our methods on our personal Apple and Google Pay accounts and demonstrate two successful attacks on these NFC payment systems. 1 Introduction Prior to the digital age, physical access control was managed by locks and keys and payments were only made via cash. Today, these are being phased out in favor of digital solutions. Physical access control is now often managed by magnetic, wireless ID cards or biometrics, such as fingerprints, while payments can be made by credit cards or contactless payment methods. The convenience of these new digital methods are making them increasingly popular. However, the greater prevalence of these technologies poses new security risks. Whereas in the past a key or cash might have to be stolen physically, they can now be stolen digitally. Furthermore, rather than just having a key or a few bills stolen, these virtual attacks can wreak havoc on a person’s life, leading to a severe invasion of privacy and identity theft.
    [Show full text]
  • NRTA Year Round Bus Service Study-Phase 2
    ,.. _, i ’f“l* I _:: : P,,_, /___ ____":% iiiiiiit ' <-‘Q ;\~__\\"‘,v'-"* -1‘ é 7 _ -' 2:-.*:! _____ _ iii, L ' _2' _ -—- *“§l E ?:7 55,- _ ,_ L L k ¢_ '___._,.i,;,, 1 _;,_; 1 II ‘ Photo by Susan Richards, SR Concepts 94% 1; K / W1 ' u<'§ -7." Q 1!“ '2 '~ ~ W, " \, 1/1 / ‘-\é‘ i 1 ‘ V J if -=) ‘ __ .-. 1; _" _. ‘ ' , ,_ rs. V\_ ‘ \ . \' " £2~.@in _ , H: I ... I 7“ - K ‘ - 5' ‘ <’ _ {ii} __.4;..* ~22” ‘TiIt K ' I \.1\>\ i? gii -Photo by Susan Richards, SR Concepts I . - Photo by SusanK‘ Richards," SR Concepts Photo by Susan Richards, SR Concepts 4 Q , § =\__§__ \ V ‘ I-1‘ 1 llflllilifilfil HODIOMI U888“fllllflfifill NRTA Year-Round Bus Service Study Phase II Report: Fare Policy Review and Development of Innovative Funding Options Nantucket Regional Transit Authority December 2016 NRTA Year-Round Bus Service Study Phase II Report TABLE OF CONTENTS Executive Summary ................................................................................................................ ES-1 Local Outreach ................................................................................................................... ES-1 Innovative Funding Options ................................................................................................ ES-1 Fare Policy Analysis ............................................................................................................. ES-2 Fare Collection Technology Analysis.................................................................................... ES-2 Next Steps .........................................................................................................................
    [Show full text]
  • Years of Leading Innovation in International Transit
    1968 -2018 Years of Leading Innovation in International Transit Conduent Transportation in France From Mid-sized French Organization to Multinational Company This year Conduent Transportation celebrates 50 years of business in France – commemorating five decades of driving technological innovation in the international transit industry. Our transformative inventions include the first validators permitting contactless ticketing, the first interoperable transit system and a mobile device-based ticketing system. During the past 50 years the face of our organization has changed. From beginning in 1968 as a medium-sized company, “Crouzet,” we gradually grew in size and capabilities, becoming “Ascom Monétel” (1995) and “ACS Solutions” (2005), before evolving into American multinational, Xerox Business Solutions (2010). Finally, in 2017, we became Conduent, Inc., a Fortune 500 company and a leading business- to-business digital interactions firm. We serve 65 of the Fortune 100 in 35 countries. Based in Valence, the French office of Conduent Transportation is the company’s lead, global office for Public Transit solutions. We invite you to learn more about this office’s fascinating, international journey and how we have helped transform the transit industry. Here are a few key highlights. 1968 – early 1970s Innovator in magnetic ticketing We sign our first ticketing contract with the Mexico City metro. As part of the contract we install the automatic ticket vending machines and verification systems. During this time we also co-invent the digital, magnetic card reader in collaboration with the RATP Group. The reader is able to encode eight bytes of information on each magnetic ticket. Conduent Transportation France also partners with RATP in creating an automated solution for the sale and verification of tickets for the prestigious RER Réseau Express Régional in Paris.
    [Show full text]
  • Tcrp Legal Research Digest 48: Legal Issues Concerning Transit Agency Use of Electronic Customer Data
    TCRP LEGAL RESEARCH DIGEST 48: LEGAL ISSUES CONCERNING TRANSIT AGENCY USE OF ELECTRONIC CUSTOMER DATA Appendix A—List of Transit Agencies Responding to the Survey Appendix B—Survey Questions Appendix C—Summary of the Transit Agencies’ Responses to the Survey Appendix D—Documents Provided by Transit Agencies Responding to the Survey A-1 APPENDIX A—LIST OF TRANSIT AGENCIES RESPONDING TO THE SURVEY 1. Ann Arbor Transportation Authority, Ann Arbor, MI 2. Antelope Valley Transit Authority, Lancaster, CA 3. Belle Urban System, The, Racine, WI 4. Berkshire Regional Transit Authority, Pittsfield, MA 5. Capital Area Transportation Authority, Lansing, MI 6. Capital District Transportation Authority, Albany, NY 7. Central Florida Regional Transportation Authority d/b/a Lynx, Orlando, FL 8. Central Ohio Transit Authority, Columbus, OH 9. Centre Area Transportation Authority, State College, PA 10. City of Cheyenne Transit Program, Cheyenne, WY 11. City of Alexandre, LA 12. City of Glendale Transit, Glendale, AZ 13. City of Madison Metro Transit, Madison, WI 14. City of Raleigh, GoRaleigh, Raleigh, NC 15. City of Visalia, Transit Division, Visalia, CA 16. City Utilities of Springfield, Springfield, MO 17. Cobb Community Transit, Marietta, GA 18. Connecticut Department of Transportation, Newington, CT 19. Corpus Christi Regional Transportation Authority, Corpus Christi, TX 20. CT Transit, Hartford, CT 21. Durham Area Transit Authority, GoDurham, Durham, NC 22. Fresno Area Express, Fresno, CA A-2 23. Golden Empire Transit District, Bakersfield, CA 24. Greater Attleboro Taunton Regional, Taunton, MA 25. Greater Cleveland Regional Transit Authority, Cleveland, OH 26. Greater Hartford Transit District, Hartford, CT 27. Greater Lynchburg Transit Company, Lynchburg, VA 28.
    [Show full text]
  • Mf1sep10x1 Secure Contactless Smart Card IC for Seamless Migration Rev
    MF1SEP10x1 Secure contactless smart card IC for seamless migration Rev. 3.0 — 27 April 2015 Product short data sheet 328630 COMPANY PUBLIC 1. General description MIFARE Plus is the only mainstream smart card family compatible with MIFARE Classic 1K and MIFARE Classic 4K that offers pre-issuance of cards prior to making security upgrades in the infrastructure. After security upgrade to Security Level 3, MIFARE Plus uses Advanced Encryption Standard (AES) for authentication, data integrity, and encryption. MIFARE Plus SE is the entry-level version of NXP’s proven and reliable MIFARE Plus product family. Designed for full functional compatibility with MIFARE Classic 1K, it provides complete support for the MIFARE Classic value blocks. MIFARE Plus SE is the choice for customers who want to switch to higher security while preparing for the future by introducing cards, ready for AES security, into the existing system environment. MIFARE Plus SE cards are easy to distribute into running MIFARE Classic systems, since it uses a linear memory structure compatible to MIFARE Classic, and because MIFARE Plus SE supports all MIFARE Classic value-block operations in the Security Levels SL1 and SL3. MIFARE Plus SE stores its 128-bit AES keys on top of the data blocks. The optional AES authentication in SL1 enables efficient detection of cards not belonging to the system. 2. Features and benefits Entry level version of the proven 1 kB EEPROM MIFARE Plus product family Simple fixed memory structure Fully supports MIFARE Classic value compatible with
    [Show full text]
  • Actpro MIFARE® Contactless Smart Card Readers
    ACTpro MIFARE® Contactless Smart Card Readers MIFARE® cards are smartcards that contain memory that enable multiple applications to read and write data to and from the card. MIFARE® card technology is widely used for access control, cashless vending, corporate ID cards, smart printing / copying, transportation and stadium ticketing. The memory on the MIFARE® classic is divided into 16 sectors and and each sector is protected by its own keys. A MIFARE® Classic card can ACTpro MIFARE Reader Range store data on each sector. Each MIFARE® Classic card has a unique serial number. MIFARE® Applications Access Control PC Logical Access Smart Copying / Printing Time & Attendance Cashless Vending Travel & Transport ACTpro MIFARE® Contactless Smart Card Readers ACTpro MIFARE 1050 MIFARE pin & proximity reader Product Code ACTpro MF 1050 ACTpro MIFARE 1040 Product Specifi cation MIFARE proximity reader ACTpro MIFARE Classic 1030 1030PM 1040 1050 Product Code Mounting Mullion Panel Surface / fl ush ACTpro MF 1040 Proximity Yes Pin No Yes Potted Electronics Yes ACTpro MIFARE 1030 IP Rating IP67 MIFARE proximity reader Operating Voltage 12 - 24 Volt DC Weight 150 65 142 155 Dimensions 108*36*13 63*58*23 110*100*35 110*100*35 Product Code (HxWxD, mm) ACTpro MF 1030 Operating -10º to +50º Celsius Temperature ACTpro MIFARE 1030PM MIFARE proximity reader Product Code ACTpro MF 1030PM ACTpro 3000 door controller ACTpro MIFARE Card MIFARE Card ACTpro 100 Product Code door station ACTpro MF Card-B ACTpro MIFARE Fob MIFARE fob Product Code ACTpro MF Fob-B mifare mifare ACTpro MIFARE Card mifare Reader USB MIFARE reader 1050 10401030PM 1030 (entry) (exit) Product Code ACT mifare Schematic ACTpro MF USB pro White Rose Way | Doncaster Carr | Doncaster | DN4 5JH Access Control Technology Unit C1, South City Business Park, Ninehundred Tel: 0845 600 4 900 Communications Tallaght, Dublin 24, Ireland.
    [Show full text]
  • NXP Solutions for Smart Mobility
    Training NXP Solutions for Smart Mobility Public MobileKnowledge September 2015 Agenda ► Introduction . NXP Smart Mobility vision . NXP contribution to Smart Mobility ► Short range smart mobility applications . Electronic ticketing for transit fare collection . Bike / car sharing services . Parking payment . Multi-application cards for different mobility solutions . Card top up via mobile phone . NFC mobile ticketing ► Long range smart mobility applications: . Electronic toll collection . Parking access control . Traffic light priority management Training 2 Smart mobility is one of the pillars of smart cities e.g: e-Health, public safety, technology accesibility Smart Living ICT ICT e.g: Sustainable buildings, Smart Smart Mobility e.g: Emission free transport, Environment water management advanced parking, accesibility ICT Smart city pillars ICT e.g: Agile civil society, e.g: e-Goverment services, Smart Goverment Smart Society social inclusion, e-learning open data , transparency, resilience ICT ICT Smart Economy e.g: High-tech industry, innovation culture enterpreneurship Training 3 Smart mobility an easy and convenient way from A to B ► Over a lifetime commuters spend an average of 10,634 hours traveling to work* . 10,634 is 443 days, 1 year and almost 3 months ► Over a lifetime commuters lose 1 week per year in traffic congestion (compared to 1980) ► 13% of income spent for transport in Europe (15% USA)** . More than half of end users willing to pay at least 10% more for technological enhancements *** * Daily Mail **Eurostat ***2013
    [Show full text]