DOCSLIB.ORG

Speedzone Comp Cyclocomputer

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Speedzone Comp Cyclocomputer 01_SpeedZone_COMP_USA.qxd 4/21/01 3:33 AM Page 1 SPEEDZONE COMP CYCLOCOMPUTER Congratulations on your purchase and welcome to the growing number of cyclists who are discovering a powerful new generation of bicycle computers. Your Specialized SpeedZone® Comp has been designed to provide the best com- bination of performance, features, durability and ease of use and installation. The following functions are available on your SpeedZone Comp bicycle computer: • SPD - Current Speed • AVS - Average speed • MAX - Maximum Speed • ATM - Automatic Start/Timer • DST - Trip Distance • ODO - Odometer (total distance) • ASI - +/- Average Speed Indicator • TM – Stopwatch • (Interval Timer) – Interval Timer • Digital 12/24 Hour Clock • Analog Clock 1 01_SpeedZone_COMP_USA.qxd 4/21/01 3:33 AM Page 2 This computer also features: • Second Wheel Option • Easy calibration Mode 1 • Triple Display LCD • Heavy-duty abrasion resistant pick-up wire • Water resistant housing • Two-year warranty 2 FIGURE 3: MOUNTING BRACKET What is included in your SpeedZone Comp package: FIGURE 1: FIGURE 2: Attach the magnet to a spoke across 1. SpeedZone Computer (1) SENSOR MAGNET from the sensor with the magnet screw. 2. Mounting bracket (1) PLACEMENT ATTACHMENT The clearance between the magnet and 3. Magnet with screw (1) 3 MOUNTING the sensor should be approximately 4. Cable tie wraps (4) THE SPEEDZONE COMP 1/32"-1/16" (1-2mm). Tighten the 5. Mounting bracket sizing straps (3) 5 The SpeedZone Comp sensor can magnet and transmitter. Do not over- mount on the right or the left side of tighten the magnet screw. (See figure 2.) the fork blade. Use the cable tie-wraps Attach the mount to the handlebar provided to position the sensor. Do not using the bracket screw provided. tighten until the final placement of the Tighten so that the bracket cannot rotate 4 sensor magnet is correct. (See figure 1) on the handlebar. There are several 2 3 01_SpeedZone_COMP_USA.qxd 4/21/01 3:33 AM Page 4 sizing straps provided to fit different odometer mode, distance mode). The "FUNCTION" (left side) button and diameter bars. (See figure 3) computer can be cycled through these ‘tap’ the "MODE" button once. The Slide the computer forward onto the modes by pressing the "MODE" button Km/h, m/h indicator will begin blink- mounting until it ‘snaps’ into place with located on the right-hand side of the ing. You may now alternate between an audible click. To remove the com- housing. Once a specific mode has miles and kilometers by pressing the puter, push it backward until it releases been entered, its values can be reset "MODE" button. When the correct from the mount. To test for proper or adjusted by pressing either the choice is flashing, select it by pressing installation of the magnet, sensor and "FUNCTION" button located on the the "FUNCTION" button. You will now computer, activate the computer by left hand side of the housing or by enter the "Programmable Odometer" picking up the front of the bicycle and using a combination of the "MODE" mode. If the odometer setting is correct FIGURE 4: PROGRAMMABLE spinning the wheel. The "wheel option" and "FUNCTION" buttons. push the "FUNCTION" button five ODOMETER SCREEN indicator will flash. If it does not flash, times to exit odometer mode. down the "FUNCTION" button and check the sensor and magnet align- 1. Miles or Kilometers selection (Otherwise, see "Setting the ‘tap’ the "MODE" button once. (See ment. Realign as necessary until the Your SpeedZone Comp will record Programmable Odometer" below). figure 4) The Km/h indicator will flash. "wheel option" indicator flashes while speed and distance in either miles If the Km/h setting is correct press the spinning the wheel. (M/h) or kilometers (Km/h). To enter 2. Setting the Programmable "FUNCTION" button once and a five- your selection of miles or kilometers, Odometer digit number will appear. You are now PROGRAMMING push the "MODE" button until ODO To access the programmable odometer in the programmable odometer mode. Programming the functions of your (odometer) appears in the lower left mode, first advance the "MODE" but- This mode is useful if you have SpeedZone Comp requires it to be side of the display (This is called the ton until (ODO) appears on the left- replaced the battery and would like to placed in various "modes" (i.e. odometer mode). Hold down the hand side of the screen. Then hold retain the mileage you have already 4 5 01_SpeedZone_COMP_USA.qxd 4/21/01 3:33 AM Page 6 ridden. To enter a mileage into the Easy Calibration Mode: #2 tire size and tap the "FUNCTION" odometer, press the "MODE" button Your SpeedZone Comp has been button to exit easy calibration mode. until the flashing digit is correct. (Note: preprogrammed with the following The "MODE" button may be held to 14 Specialized tire sizes: Roll Out Method scroll to the correct digit.) Press the 26 X 1.0 26 X 2.2 The roll out method will provide the "FUNCTION" button to select the next 26 X 1.25 650c X 20 most accurate computer calibration digit to the right. Repeat this process 26 X 1.5 700c X 20 and can take into account variables until all five digits are entered as your 26 X 1.95 700c X 23 such as inflation pressure, rim width existing mileage. 26 X 1.9 700c X 26 and rider weight. 26 X 2.0 700c X 32 FIGURE 5: EASY CALIBRATION SCREEN 1. Extend a tape measure out to 3. Wheel Circumference Selection 26 X 2.1 700c X 38 3000mm (120 inches) and lock To set the circumference for the type selected tire size for wheel option #1. it in place. of tires you are using, you can use When using Easy Calibration Mode, To scroll through the preprogrammed 2. With your tire inflated to its proper Specialized’s exclusive "Easy the SpeedZone will display the tire size tire sizes, tap both the "MODE" and pressure, place the valve at the 6:00 Calibration Mode" or measure your on its LCD display screen. (See figure "FUNCTION" buttons simultaneously. position (at the bottom) directly over actual tire circumference by the rollout 5) The Easy Calibration Mode is When you reach the desired tire size the start of the measuring tape. method. Two different tire diameters accessed by entering the odometer press the "FUNCTION" button once to 3. Roll the wheel one complete revolu- may be entered into the computer’s (ODO) mode and holding down the select it and enter Easy Calibration tion until the valve stem is again at "Second Wheel Option." "FUNCTION" button for three seconds. Mode for wheel option #2. Follow the the 6:00 position. Read the tape The display will now show the currently same procedure to program the wheel directly under the valve and note the distance in millimeters. (To con- 6 7 01_SpeedZone_COMP_USA.qxd 4/21/01 3:33 AM Page 8 Roll Forward You may also use the following digit to the right. Repeat the process quick-reference chart: until all four digits are entered as your Stem tire circumference. Press the "FUNC- Generic Tire Size Chart TION" button once to select it and (This chart is for non-specialized tires) enter the circumference for wheel Wheel 26 X 1.75 2140 option #2. Follow the same procedure Circumference 26 X 2.0 2074 to program the wheel #2 tire size and 26 X 2.1 2090 tap the "FUNCTION" button to exit cir- FIGURE 6: ROLL OUT METHOD 650C X 20 1945 cumference programming mode. 700C X 26 2124 FIGURE 7: CIRCUMFERENCE vert inches to millimeters, multiply 700C X 38 2170 PROGRAMMING SCREEN 4. Setting the Clock inches by 25.4). Use this number to Your SpeedZone Comp features two replace the default (default values Programming the circumference: the "MODE" and "FUNCTION" buttons clocks, one analog and one digital. are 2073 for wheel one, and 2134 To enter the tire circumference number, simultaneously until the display shows The hands of the analog clock will be for wheel two) when programming select the odometer (ODO) mode and a four-digit number. This number set automatically to correspond to the your computer. (See figure 6) hold down the "FUNCTION" button for represents your tire circumference in digital one. To access the "clock mode" three seconds. The display will now millimeters. Press the "MODE" button press and hold the "MODE" button show the currently selected tire size until the flashing digit is correct. (Note: for three seconds. To set the clock, for wheel option #1. (See figure 7) The "MODE" button may be held to press the "FUNCTION" button for three If necessary scroll through the prepro- scroll to the correct digit.) Press the seconds. The display will flash either grammed tire sizes by tapping both "FUNCTION" button to select the next twelve (12:) or twenty-four (24:). 8 9 01_SpeedZone_COMP_USA.qxd 4/21/01 3:33 AM Page 10 Select between 12: or 24: mode by manually and records the time whether riding time. If TM is selected the AVS is pressing the "MODE" button. Press the the wheel is rotating or not. Tapping based on the total time the stopwatch "FUNCTION" button to set the mode. the "FUNCTION" button starts and is turned on or activated. (See figure 9) The hour digit will now begin flashing. stops the stopwatch and holding the To select between ATM and TM, first Press the "MODE" button to adjust the "FUNCTION" button for three seconds press the "MODE" button until "ATM" hour digits and press the "FUNCTION" will reset to stopwatch.
Load more

Recommended publications
  • News from the Road
    News from the Road Three Seventyish Gents on a Roll by Matt Sobel Part 1 indulged his enthusiasm we were primarily on Volume 1, Issue 5 for planning, maps, and New York State Bicycle July 2009 It wasn’t going to hap- his GPS to devise route Route 5 which is gener- pen. It would take too deviations with less ally slightly south of the much planning. I would- traffic, better scenery, Erie Canal. However, n’t be able to bicycle to or greater historical we frequently deviated my fiftieth college reun- interest. Generally, we from NYS BR 5 to see Inside this issue: ion in New York City. hugged the south shore notable canal locks and Then out of the blue, of Lake Erie until Buf- other sights. Oliver is a Letter from the Edi- 2 Diane, at Hubbub, told falo, where we were canal buff and his com- tor me that one of her cus- joined by Charlie, who ments and my prepara- tomers had asked her if I Ride, Therefore I 2 used to live in the tion for the trip taught Am… she knew anyone who Cleveland area. me much about canals might be interested in in general, and the Erie The Cleveland Bike 3 Oliver and Charlie were cycling from Cleveland Canal in particular. Commuter to Boston during the in the class of 1959 at second half of May. She MIT and Harvard, re- Gear, Tires, and Thursday Night Ride 5 Leader Thoughts forwarded his email spectively, and I gradu- Hauling Freight ated from Columbia in inquiry and that’s how I Oliver rode his touring CTC Club Notes 5 that year.
    [Show full text]
  • Furnace Creek 508 Race Report Jon “SKUA” Skramstad (11/19/10)
    Furnace Creek 508 Race Report Jon “SKUA” Skramstad (11/19/10) PROLOGUE The Furnace Creek 508 experience for me starts with the question of “Why”? It’s the question I’ve been most frequently askeD about the race anD the least unDerstooD. How Does one get the notion that a 500-mile bike riDe throuGh the California desert in 48 hours or less is a GooD idea? My introDuction to the race was 5 years aGo when my Brother, Erik completeD the course as a solo contestant. I was on his crew DurinG the race anD it left an indelible mark on me. I knew my brother was one tough nut but to see him poundinG out the course hour By hour maDe my oBservations real. I think we’re all woweD By elite performances at events like the Olympics but the longest, touGhest event is what, a marathon of arounD 2 hours? To witness Erik still crankinG his way up monster climBs at mile 450 anD lookinG as stronG as he Did at mile 45 was the pinnacle of elite to me anD somethinG I’ll always Be extremely prouD of him for. Every year since Erik’s solo finish, I’ve participateD in the event as a riDer or crew memBer, the race is that adDictinG. 200 solo riDers anD teams show up in California at MaGic Mountain anD skip the theme park to ploD along the Dry, hot, lonely anD cruel Desert all the way to the entrance of Joshua Tree National Park. The race draws out a unique Breed of human BeinG.
    [Show full text]
  • Entire Issue in PDF Format
    AMERICAN RANDONNEUR VOLUME 21 • ISSUE #4 WINTER 2018 IN THIS Three Americans in Paris — MARTIN GRUEBELE AND RYAN LINNE The Coulee Challenge 1200km: The Riders’ Stories — ROB WELSH ISSUE Sliven–Varna–(Sofia)–Sliven 1200km Ride Report — GEORGI STOYCHEV Official Travel Agency for the 2019 Paris - Brest - Paris Air Travel Reservations Ground Transportation Luggage Support + Storage Hotels Accommodations Trip + Traveler Insurance Excursions + River Cruises You can focus on training, we'll handle all of your travel needs. Give one of our travel professionals a call today at 314.842.6000. www.PBP19.com WHAT’S INSIDE President’s Message 2 John Lee Ellis American Randonneur Magazine From the Editor 3 Winter 2018 • Volume 21, Issue #4 Janice Chernekoff Three Americans in Paris 4 Martin Gruebele and Ryan Linne RUSA BOARD OF DIRECTORS President: John Lee Ellis RUSA: The Lay of Our Land 9 Vice President: Debra Banks Deb Banks Treasurer: David Thompson London–Edinburgh–London: An Epic Cycling Adventure 12 Secretary: Lois Springsteen Stacy Kline Board Member: John Cap'n Ende Board Member: Nigel Greene An Overnight Brevet—What a Hoot! 16 RBA Liaison: Jake Kassen Betty Jean Jordan COMMITTEE CHAIRS Stranger in a Strange Land: A Newbie Takes on the Ocean Beach 200km 22 Brevet Coordinator: Roland Bevan (chairman); Oliver Severino Lois Springsteen, Rob Hawks, and Rob Welsh Medals and Awards Coordinator: John Lee Ellis New RUSA Members 26 Membership: Nigel Greene; Don Hamilton Organizing and Riding a Hilly and Hot NJ 600 28 Webmaster: John Lee Ellis Joe Kratovil
    [Show full text]
  • 2004 Turbo® Sport Cyclocomputer
    2004 TURBO® SPORT CYCLOCOMPUTER Congratulations on your purchase! You are now the owner of one of the world’s most advanced cyclocomput- ers. Your Specialized Turbo® Sport a revolutionary new three-line LCD screen. The large, easy to read, digits allow you to view two functions simultaneously and the alphanumeric dot matrix display provides a quick refer- ence to the currently displayed function. The Turbo® Sport has been designed to provide the best combina- tion of performance, features, durability and ease of use. 3 7 4 5 8 6 2 1 FIGURE 1 This illustration describes the screen display and buttons MODE/SET rocker switch Dot-matrix Display Area Digital Display Area Wheel Option Indicator MPH or KM/H indicator 1 The following 7 functions 31.8mm mounting are available on your bracket (1) Turbo® Sport: Wired Speed sensor (1) SPEED – Current Speed Magnet with screw (1) AVSPD – Average speed Adhesive backed MXSPD – Maximum Speed magnet (1) TRIP – Trip Distance Cable tie wraps (5) ODO – Odometer (total Mounting bracket sizing distance) straps (3) ATM – Automatic Start/Timer FIGURE 2 CLOCK – Digital 12/24 Hour Clock Battery Installation and replacement- FIGURE 2 Before using your Turbo® This computer Sport Computer you will also features: need to install the battery. Wired speed sensing Turn the computer over so bottom of the case with the The Turbo® Sport wired Two function LCD Display the display is facing down- tip of a pen or a paper speed sensor can mount on Second Wheel Option ward. Use a coin to clip. This will clear all the the right or the left side of Easy Calibration Mode unthread the battery cap data and re-start the the fork blade.
    [Show full text]
  • Owner's Manual
    OWNER’S MANUAL ENGLISH OWNER’S MANUAL THANK YOU AND CONGRATULATIONS We appreciate your trust in Mondraker. This bicycle is the result of work done with the most advanced technology and assembled with the best components for its use. The Mondraker bicycle range can cover all your needs, from a great means of transport to a reliable competition bike or just for leisure. TABLE OF CONTENTS 1. Importance and purpose of this manual 3. Additional technical information 1.1 Why should you read this manual? 1.2 Bicycle parts 4. Maintenance 1.3 Bicycle types 4.1 Cleaning 1.4 Intended use of your bicycle 4.2 Lubricating 2. Adjusting your Mondraker bike 5. e-Bikes 2.1 Riding position and bike assembly 2.2 Bike safety testing 6. Mondraker warranty 2.3 Safety equipment 2.4 If you have a fall GENERAL WARNING: Obviously bicycling involves risk of falling and injury. By choosing to ride a bicycle you assume the responsibility for that risk, so you need to know and follow the rules of safe and responsible riding and proper use and maintenance. Although riding a bike will never be entirely risk-free because there are always external factors you cannot control, proper use will reduce that risk considerably. This manual contains a number of “Warnings” and “Cautions”. If you do not follow them you will be using your bike unsafely or it will not work as it should and that might expose you to danger. WARNING: indicates a potentially hazardous situation which if not avoided could result in serious injury or death.
    [Show full text]
  • List of Bicycle Parts
    List of bicycle parts Bicycle parts For other cycling related terms (besides parts) see Glossary of cycling. List of bicycle parts by alphabetic order: Axle: as in the generic definition, a rod that serves to attach a wheel to a bicycle and provides support for bearings on which the wheel rotates. Also sometimes used to describe suspension components, for example a swing arm pivot axle Bar ends: extensions at the end of straight handlebars to allow for multiple hand positions Bar plugs or end caps: plugs for the ends of handlebars Basket: cargo carrier Bearing: a device that facilitates rotation by reducing friction Bell: an audible device for warning pedestrians and other cyclists Belt-drive: alternative to chain-drive Bicycle brake cable: see Cable Bottle cage: a holder for a water bottle Bottom bracket: The bearing system that the pedals (and cranks) rotate around. Contains a spindle to which the crankset is attached and the bearings themselves. There is a bearing surface on the spindle, and on each of the cups that thread into the frame. The bottom bracket may be overhaulable (an adjustable bottom bracket) or not overhaulable (a cartridge bottom bracket). The bottom bracket fits inside the bottom bracket shell, which is part of the bicycle frame Brake: devices used to stop or slow down a bicycle. Rim brakes and disc brakes are operated by brake levers, which are mounted on the handlebars. Band brake is an alternative to rim brakes but can only be installed at the rear wheel. Coaster brakes are operated by pedaling backward Brake lever:
    [Show full text]
  • Checklist for Self-Sustained Tandem Touring
    Checklist for Self-Sustained Tandem Touring - indicates items we went with - indicates items we did not take (3) – indicates quantity other than 1 Tandem Bicycle and Items Fastened to Frame Item Source or Brand Comment Large frame road tandem 2000 Santana Noventa Couplings and cable dis-connectors, 48 spoke wheels and 175 mm crank arms for Stoker (170 mm is standard for Stoker) Front pannier rack Beckman, Bend, OR Special bosses for rack applied to tandem at time of manufacture Single wheel trailer BOB Yak – Santana width Replaced original 2000 fork with manufacturer’s upgrade and had forks 16” wheel hub upgraded to Shimano Deore HB-M510 Skewer BOB Special skewer for attaching trailer Bike tag Custom made AK 2 FL tag and frame bolted to trailer wheel assembly HFH banners (2) Custom made To promote our cycling cause, banners were fastened to opposite sides of trailer Flat handle bars with NA Applying hybrid features to a road bike bar ends (2) Grip shifters (2) SRAM Applying hybrid features to a road bike Brake levers (2) Shimano Deore XL Applying hybrid features to a road bike Y-cord splitter www.PrecisionTandems.com Allows dual rim brake control with right brake lever while the left lever controls the disc brake. Whether you use a disc brake or a drum brake, a third brake that’s not touching the rim is imperative! Headset Chris King Upgrade Suspension stem Softride Placed on front handle bars Suspension seat post Tamer Tricky Dick Upgrade for Stoker’s comfort L bracket (3) Tandems East Bolted to cage bosses – doubled bottle storage locations Single bottle cage holder Minoura Bolted to Stoker handlebars for additional bottle storage Water bottle cage (3) Trek aluminum Water bottle cage (5) Innovations in Cycling X cage allows container removal where space is limited - 1 - Fenders, front & back, for SKS/Esge, www.rivbike.com Front fender has auto-ejection feature in case a rock is trapped.
    [Show full text]
  • User Manual and Maintenance 2
    USER MANUAL AND MAINTENANCE 2 INDEX 1. INTRODUCTION 4 WARRANTY 5 GENERAL RECOMMENDATIONS AND WARNINGS 5 2. DESCRIPTION OF THE PINARELLO NYTRO DUST BICYCLE 7 3. FIRST RIDE WITH YOUR NYTRO DUST 8 4. BEFORE EVERY RIDE 11 5. GENERAL INFORMATION ON YOUR NYTRO DUST BICYCLE 12 USER INTERFACE 12 CONNECTION OPTIONS 13 6. GENERAL NOTE ON ASSEMBLY AND SET-UP 14 SUSPENSION FEATURES AND ADJUSTMENT 14 FRONT FORK 14 EN REAR SUSPENSION 14 TIRE PRESSURE 14 SEATPOST 15 TIGHTENING TORQUES 15 7. GENERAL MAINTENANCE AND CARE 16 GENERAL CLEANING AND MAINTENANCE 16 CLEANING THE FRONT FORK 16 CLEANING THE REAR SUSPENSION 16 INSPECTION AND MAINTENANCE 17 8. USE AND MAINTENANCE OF THE BATTERY AND BATTERY CHARGER 19 CHARGING AND USE OF THE BATTERY 19 CHARGE LEVEL 19 INSTALLING AND REMOVING THE BATTERY 19 TECHNICAL DATA 19 ERROR MESSAGES AND TROUBLESHOOTING 19 BATTERY HAZARDS AND ACCIDENT PREVENTION 19 9. TRANSPORTING YOUR BIKE 21 10. AFTER A FALL 23 11. GENERAL INFORMATION ON THE USE OF THE NYTRO DUST 24 FOR LONG RIDES 24 12. TECHNICAL SPECIFICATIONS 27 13. CE DECLARATION OF CONFORMITY 29 1. INTRODUCTION Dear Pinarello customer, In this manual, Cicli Pinarello provides recommendations for the use of your new bicycle and instructions for its care and maintenance. Technical evolution in bicycle technologies is rapid, so even if you consider yourself an expert cyclist you should still read this manual. For your safety and to guarantee long life for your bike, you should read the entire manual, paying special attention to the sections with instructions on assembling and setting up the bike (Section 5), special instructions for your first ride (Section 3) and general instructions on the proper use of your bicycle (Section 8) and its pedal assist system (Sections 4 and 7).
    [Show full text]
  • Bankruptcy Auction for Golden Spoke Bicycle Shop
    09/25/21 11:08:00 Bankruptcy Auction for Golden Spoke Bicycle Shop Auction Opens: Tue, Jul 7 12:00am PT Auction Closes: Thu, Jul 9 10:00am PT Lot Title Lot Title 09101 New Raleigh Tokul 2 09135 New Haro 300.1 09103 New Raleigh Route 09136 New Raleigh Talus 29 Sport 09104 New Raleigh lil' Push 09137 New Raleigh Talus 2.0 09105 New Raleigh lil' Push 09138 New Raleigh Eva 24 09106 New Raleigh Jazzi 09139 New Raleigh Talus 3 09107 New Raleigh Lil Honey 16 09140 New Raleigh Route 3.0 09108 New Raleigh Cupcake 12 09141 New Raleigh Talus 1 09109 New Raleigh MXR Micro Mini 09142 New Raleigh Talus 3.0 09110 New Haro Z-12 09143 New Raleigh Route 3.0 09111 New Raleigh MXR 09144 New Raleigh Talus 2 09112 New Raleigh Jazzi 09145 New Raleigh Atomic 13 Venture 4.0 09113 New Hotrock Specialized 09146 New Raleigh Route 3.0 09114 New Haro Z-12 09147 New Raleigh Talus 4.0 09115 New Raleigh MXR 16 09148 New Raleigh Route 4.0 09116 New Raleigh Lil Honey 09149 New Raleigh Special 24 09117 New Raleigh Lily 6 Speed 09150 Reconditioned Retro Schwinn Co-Ed 09118 New Haro 300.1 09151 New Raleigh Atomic 13 Venture 09119 New Raleigh Lily 6 Speed 09152 New Diamondback Reactor Pro 09120 New Mission Kink Launch 09153 New Raleigh Route 3.0 09121 New Raleigh Jazzi 12B 09154 New Specialized Hot Rock Kids Bike 09122 New Raleigh Venture 7 Speed 09155 New Raleigh Atomic 13 Venture 09123 New Raleight MXR Mini 09156 New Raleigh Venture 4.0 Atomic 13 09124 New Raleigh Talus 7 Speed 09157 Reconditioned Huffy Veracrus 09125 New Raleigh Talus 7 Speed 09158 New Raleigh Route 4.0
    [Show full text]
  • Operation Manual 1
    OPERATION MANUAL 1 iXROVER Model S, Model M, Model L SPORTS MOBILITY SYSTEM FLORIDA LLC Registered office 330 S. Pineapple Avenue, Suite 110 Sarasota, Florida 34236 941 735 3444 [email protected] www.ixroverfl.com Thank you for purchasing the multifunctional iXROVER stroller and we believe that it will serve you for a long time. The multifunctional stroller can be used as: 1/ Standard baby buggy 2/ Bike trailer 3/ Sports buggy for running, inline skating, tourism, and other activities NOTICE Please read this operation manual carefully before using the iXROVER stroller. 2 DESCRIPTION OF THE MAIN COMPONENTS OF THE STROLLER 3 GENERAL NOTICES 4 TECHNICAL DATA 5 MAINTENANCE, CARE AND STORAGE OF STROLLER 8 ASSEMBLY AND DISASSEMBLY OF THE STROLLER 10 1.1 Rear axle 10 1.2 Front axle 12 2 ADJUSTING THE REQUIRED ALIGNMENT OF THE STROLLER 14 3 BRAKE ADJUSTMENT 16 3.1 Locking additional parking brakes 18 4 HANDLE 19 4.1 Handle with metal joints TH 900 19 5 HOOD 19 6 FASTENING THE TRANSPORTED PERSON 20 7 CARRYING THE STROLLER WITH LOAD 21 8 COUPLING OF THE STROLLER BEHIND A BICYCLE 21 8.1 Bicycle hitch 22 8.2 Tow bar of the stroller 22 8.3 Coupling of the stroller tow bar with the bicycle hitch 23 8.4 Flag 24 9 OTHER ACCESSORIES 25 9.1 Cyclocomputer – speedometer 25 9.2 Mosquito net, windstopper and waterproof 26 9.7 Additional bags 32 9.8 Transport bag 33 9.9 Special head rest 33 3 Description of the main components of the stroller A – height adjustable handle L – mount for fixing mosquito net B – brake lever with parking lock and windstopper C –
    [Show full text]
  • SGX-CA600 User's Guide (English)
    User's Guide (for WEB) Introduction GPS cycle computer Initial Setup SGX-CA600 Basic Operations Training Using the Alert Notification Function Using the Strava Live Segment Function Using the Live Partner Function Analyzing Log Data Navigation Pedaling Monitor Bike and Sensor Settings Advanced Settings Linking with External Services Frequently Asked Questions Appendix English Contents Introduction ........................6 Initial Setup ......................38 • Checking Accessories ................ 6 • Performing the Initial Setup by • Part Names and Functions ......... 7 Operating the Device ............... 39 – Front view ................................ 7 • Configuringthe Settings in the – Back view ................................ 9 App .......................................... 42 • Name of Each Screen ................ 9 • Configuringthe Settings on the – Meter screen ........................... 9 Device ...................................... 43 – Main menu screen ................. 10 – User Settings ......................... 43 • Button Operation in Each Screen – Bike Settings ......................... 43 and Screen Hierarchy ...............11 – Sensor Settings ..................... 43 –[ ←]/[→] buttons, [Confirm] but- – Wi-Fi Settings ........................ 43 ton, [Menu] button ..................11 – Page Settings ........................ 43 –[ Lap] button and [Power]/ – Map Download ...................... 43 [Logging] button ................... 12 – Screen hierarchy ................... 13 Basic Operations .............44 •
    [Show full text]
  • SGX-CA500 Owners Manual
    EN DE FR NL User's Guide IT Cyclocomputer SGX-CA500 Please read the "Important Information for the User" in the product box for product warnings and other important safety information. EN Table of Contents Introduction Application Overview.................................................................... 3 CycloMeter .............................................................. 27 Features .................................................................... 4 Viewing Pages and Performing Page Operations ..........27 Option Settings ..............................................................29 Getting Started Changing the Pageset ...................................................30 Pageset List ...................................................................31 Checking Accessories/Part Names and Functions ....5 Pageset Edit ...................................................................32 Accesories .......................................................................5 Layout Pattern List .........................................................33 Part Names and Functions ..............................................5 Data Fields Settings .......................................................33 Introduction Charging .................................................................... 6 Data Field Type/Pattern List ...........................................34 Charging the Device ........................................................6 History Viewer ......................................................... 39 Checking
    [Show full text]