01_SpeedZone_COMP_USA.qxd 4/21/01 3:33 AM Page 1 SPEEDZONE COMP CYCLOCOMPUTER Congratulations on your purchase and welcome to the growing number of cyclists who are discovering a powerful new generation of bicycle computers. Your Specialized SpeedZone® Comp has been designed to provide the best com- bination of performance, features, durability and ease of use and installation. The following functions are available on your SpeedZone Comp bicycle computer: • SPD - Current Speed • AVS - Average speed • MAX - Maximum Speed • ATM - Automatic Start/Timer • DST - Trip Distance • ODO - Odometer (total distance) • ASI - +/- Average Speed Indicator • TM – Stopwatch • (Interval Timer) – Interval Timer • Digital 12/24 Hour Clock • Analog Clock 1 01_SpeedZone_COMP_USA.qxd 4/21/01 3:33 AM Page 2 This computer also features: • Second Wheel Option • Easy calibration Mode 1 • Triple Display LCD • Heavy-duty abrasion resistant pick-up wire • Water resistant housing • Two-year warranty 2 FIGURE 3: MOUNTING BRACKET What is included in your SpeedZone Comp package: FIGURE 1: FIGURE 2: Attach the magnet to a spoke across 1. SpeedZone Computer (1) SENSOR MAGNET from the sensor with the magnet screw. 2. Mounting bracket (1) PLACEMENT ATTACHMENT The clearance between the magnet and 3. Magnet with screw (1) 3 MOUNTING the sensor should be approximately 4. Cable tie wraps (4) THE SPEEDZONE COMP 1/32"-1/16" (1-2mm). Tighten the 5. Mounting bracket sizing straps (3) 5 The SpeedZone Comp sensor can magnet and transmitter. Do not over- mount on the right or the left side of tighten the magnet screw. (See figure 2.) the fork blade. Use the cable tie-wraps Attach the mount to the handlebar provided to position the sensor. Do not using the bracket screw provided. tighten until the final placement of the Tighten so that the bracket cannot rotate 4 sensor magnet is correct. (See figure 1) on the handlebar. There are several 2 3 01_SpeedZone_COMP_USA.qxd 4/21/01 3:33 AM Page 4 sizing straps provided to fit different odometer mode, distance mode). The "FUNCTION" (left side) button and diameter bars. (See figure 3) computer can be cycled through these ‘tap’ the "MODE" button once. The Slide the computer forward onto the modes by pressing the "MODE" button Km/h, m/h indicator will begin blink- mounting until it ‘snaps’ into place with located on the right-hand side of the ing. You may now alternate between an audible click. To remove the com- housing. Once a specific mode has miles and kilometers by pressing the puter, push it backward until it releases been entered, its values can be reset "MODE" button. When the correct from the mount. To test for proper or adjusted by pressing either the choice is flashing, select it by pressing installation of the magnet, sensor and "FUNCTION" button located on the the "FUNCTION" button. You will now computer, activate the computer by left hand side of the housing or by enter the "Programmable Odometer" picking up the front of the bicycle and using a combination of the "MODE" mode. If the odometer setting is correct FIGURE 4: PROGRAMMABLE spinning the wheel. The "wheel option" and "FUNCTION" buttons. push the "FUNCTION" button five ODOMETER SCREEN indicator will flash. If it does not flash, times to exit odometer mode. down the "FUNCTION" button and check the sensor and magnet align- 1. Miles or Kilometers selection (Otherwise, see "Setting the ‘tap’ the "MODE" button once. (See ment. Realign as necessary until the Your SpeedZone Comp will record Programmable Odometer" below). figure 4) The Km/h indicator will flash. "wheel option" indicator flashes while speed and distance in either miles If the Km/h setting is correct press the spinning the wheel. (M/h) or kilometers (Km/h). To enter 2. Setting the Programmable "FUNCTION" button once and a five- your selection of miles or kilometers, Odometer digit number will appear. You are now PROGRAMMING push the "MODE" button until ODO To access the programmable odometer in the programmable odometer mode. Programming the functions of your (odometer) appears in the lower left mode, first advance the "MODE" but- This mode is useful if you have SpeedZone Comp requires it to be side of the display (This is called the ton until (ODO) appears on the left- replaced the battery and would like to placed in various "modes" (i.e. odometer mode). Hold down the hand side of the screen. Then hold retain the mileage you have already 4 5 01_SpeedZone_COMP_USA.qxd 4/21/01 3:33 AM Page 6 ridden. To enter a mileage into the Easy Calibration Mode: #2 tire size and tap the "FUNCTION" odometer, press the "MODE" button Your SpeedZone Comp has been button to exit easy calibration mode. until the flashing digit is correct. (Note: preprogrammed with the following The "MODE" button may be held to 14 Specialized tire sizes: Roll Out Method scroll to the correct digit.) Press the 26 X 1.0 26 X 2.2 The roll out method will provide the "FUNCTION" button to select the next 26 X 1.25 650c X 20 most accurate computer calibration digit to the right. Repeat this process 26 X 1.5 700c X 20 and can take into account variables until all five digits are entered as your 26 X 1.95 700c X 23 such as inflation pressure, rim width existing mileage. 26 X 1.9 700c X 26 and rider weight. 26 X 2.0 700c X 32 FIGURE 5: EASY CALIBRATION SCREEN 1. Extend a tape measure out to 3. Wheel Circumference Selection 26 X 2.1 700c X 38 3000mm (120 inches) and lock To set the circumference for the type selected tire size for wheel option #1. it in place. of tires you are using, you can use When using Easy Calibration Mode, To scroll through the preprogrammed 2. With your tire inflated to its proper Specialized’s exclusive "Easy the SpeedZone will display the tire size tire sizes, tap both the "MODE" and pressure, place the valve at the 6:00 Calibration Mode" or measure your on its LCD display screen. (See figure "FUNCTION" buttons simultaneously. position (at the bottom) directly over actual tire circumference by the rollout 5) The Easy Calibration Mode is When you reach the desired tire size the start of the measuring tape. method. Two different tire diameters accessed by entering the odometer press the "FUNCTION" button once to 3. Roll the wheel one complete revolu- may be entered into the computer’s (ODO) mode and holding down the select it and enter Easy Calibration tion until the valve stem is again at "Second Wheel Option." "FUNCTION" button for three seconds. Mode for wheel option #2. Follow the the 6:00 position. Read the tape The display will now show the currently same procedure to program the wheel directly under the valve and note the distance in millimeters. (To con- 6 7 01_SpeedZone_COMP_USA.qxd 4/21/01 3:33 AM Page 8 Roll Forward You may also use the following digit to the right. Repeat the process quick-reference chart: until all four digits are entered as your Stem tire circumference. Press the "FUNC- Generic Tire Size Chart TION" button once to select it and (This chart is for non-specialized tires) enter the circumference for wheel Wheel 26 X 1.75 2140 option #2. Follow the same procedure Circumference 26 X 2.0 2074 to program the wheel #2 tire size and 26 X 2.1 2090 tap the "FUNCTION" button to exit cir- FIGURE 6: ROLL OUT METHOD 650C X 20 1945 cumference programming mode. 700C X 26 2124 FIGURE 7: CIRCUMFERENCE vert inches to millimeters, multiply 700C X 38 2170 PROGRAMMING SCREEN 4. Setting the Clock inches by 25.4). Use this number to Your SpeedZone Comp features two replace the default (default values Programming the circumference: the "MODE" and "FUNCTION" buttons clocks, one analog and one digital. are 2073 for wheel one, and 2134 To enter the tire circumference number, simultaneously until the display shows The hands of the analog clock will be for wheel two) when programming select the odometer (ODO) mode and a four-digit number. This number set automatically to correspond to the your computer. (See figure 6) hold down the "FUNCTION" button for represents your tire circumference in digital one. To access the "clock mode" three seconds. The display will now millimeters. Press the "MODE" button press and hold the "MODE" button show the currently selected tire size until the flashing digit is correct. (Note: for three seconds. To set the clock, for wheel option #1. (See figure 7) The "MODE" button may be held to press the "FUNCTION" button for three If necessary scroll through the prepro- scroll to the correct digit.) Press the seconds. The display will flash either grammed tire sizes by tapping both "FUNCTION" button to select the next twelve (12:) or twenty-four (24:). 8 9 01_SpeedZone_COMP_USA.qxd 4/21/01 3:33 AM Page 10 Select between 12: or 24: mode by manually and records the time whether riding time. If TM is selected the AVS is pressing the "MODE" button. Press the the wheel is rotating or not. Tapping based on the total time the stopwatch "FUNCTION" button to set the mode. the "FUNCTION" button starts and is turned on or activated. (See figure 9) The hour digit will now begin flashing. stops the stopwatch and holding the To select between ATM and TM, first Press the "MODE" button to adjust the "FUNCTION" button for three seconds press the "MODE" button until "ATM" hour digits and press the "FUNCTION" will reset to stopwatch.