Optics for Excimer Laser Lithography

Total Page:16

File Type:pdf, Size:1020Kb

Optics for Excimer Laser Lithography 04_000479(0380)日東光器/C裏_エキシマ(リーフ) Optics for Excimer Laser Lithography Nitto Optical Co., Ltd. provides high-quality optical devices required for semiconductor manufacturing equipment such as excimer laser lithography, KrF and ArF, which become minute and precise with the progress of the semiconductor technology. Major Products and Measuring Instruments ZYGO 12" Interferometer WYKO NT1100 Fabry-Perot Etalon for Excimer Laser Etalon Flatness Etalon Roughness CaF2 Window Surface Flatness Surface Roughness CaF2 Prism Optics for Laser Interferometers Demands for highly accurate measurement technology are expanding these days. Our optical devices for laser interferometers are highly evaluated in the lithography field. Products: Corner Cube Prism (CCP)・Polarizing Beam Splitter (PBS) ・Quarter Wave Plate Quarter Wave Plate Light Source CCP CCP:Beam Deviation: < 2 arc seconds CCP:Transmitted Wavefront Distortion Reference Flat PBS (Fused Silica) P Polarization PBS (Fused Silica) 45゜rotated P&S Polarization S Polarization Detector PBS:Transmitted Wavefront Distortion PBS:Beam Deviation: < 2 arc seconds 1-14-18 Kudankita, Chiyoda-ku, Tokyo 102-0073, Japan TEL:+81-3-3511-8111 FAX:+81-3-3511-8110 E-MAIL:[email protected] URL:http://www.nitto-optical.co.jp/english/index.html 0606 -1- 04_000479(0380)日東光器/C表_バーミラー(リーフ) Bar Mirror for Semiconductor and LCD Steppers Nitto Optical provides Bar Mirrors which become large, high precision and diversified in materials with demand expansion for semiconductors and LCD market. Size : 100 mm~3500 mm Flattness : μm ~λ Measuring Instrument : Mirror Flatness by ZYGO 32" (φ800) or ZYGO 12" (φ300) interferometers. (please contact us for details about size, shape and materials) LCD Stepper Application Size: 100~3500 mm. (Please contact us for details about size, shape and maretials) Major Products and Measuring Instruments Ultra Long Bar Mirror: 2500 mm Class for G7 and G8 Long Bar Mirror: 1500 mm Class for G6 Measurement of 1500 mm Class Bar Measuring Instrument: ZYGO 32" (φ800) Interferometer Semiconductor Stepper Application Size: 100~1000 mm. (Please contact us for details about size, shape and materials) Major Products and Measuring Instruments Ceramic Bar Mirror 400 mm Class SiC Ceramic Bar Mirror Measuring Instrument: ZYGO 12" Inteferometer Measurement Data: 400 mm Class 0606 -2- 04_000479(0380)日東光器/B裏_EU(VリLー(フリー) フ ) Optics for Extreme Ultra Violet Lithography Nitto Optical advances production of optical mirrors of the EUV lithography technology, glass plates for mask and Schwarzschild optical system products using the flat processing technology that has been cultivated in 50 years. 1. Multi-layer Reflection Mirror ・Production by Magnetron Sputtering Method ・Mo/Si multi-layer 80% = 70% d 6.9nm 60% 50% e c γ= n a 0.4 t 40% c e l f e = % ( ) R 30% R 64 present 20% 10% ( > %) 0% Target 67 12.5 13.0 13.5 14.0 14.5 Wavelength /nm Magnetron Sputtering Machine Spectral Characteristics (reflection rate) 2. Glass for EUV Mask ・Material: Low-Expansion Glass ・Surface Roughness: < 3Å (present) Target < 1.5Å ・Flatness: < 63 nm (present) Target < 50 nm ・Paralleism:< 61.8 nm (present) Target < 50 nm ※ Reference Exhibition Flatness Surface Roughness Rate (AFM) 3. EUV Band Beam Splitter ・Wavelength Band: 13.5 nm 1) Re f e c t a n c e > 30 % 2) Tr a n s m i t t a n c e > 30 % 3) Fla tn es s < 2n m (1 5 m m □ ) ・Transmission/Reflection: >=30% Separation Ratio: 50% Spe ci fi ca ti on of Bea ms pl it te r ・Material: Si ※ Reference Exhibition Multilayer Si Waf er SiC Lay 4. Schwarzschild Optical System ・ Surface Finish: λ/10 ・ Roughness: < 0.3 nm (RMS) ・ Size: < 200 mm diameter ・ Form: SPHERICAL The above products are being developed by the joint research with Kinoshita Laboratory of University of Hyogo. 1-14-18 Kudankita, Chiyoda-ku, Tokyo 102-0073, Japan TEL:+81-3-3511-8111 FAX:+81-3-3511-8110 E-MAIL:[email protected] URL:http://www.nitto-optical.co.jp/english/index.html 0606 -3- 04_000479(0380)日東光器/B表_フッ化(リーフ) CaF2 Monocrystal Recently, blue or blue purple system LDs and LEDs made from the GaN system compound semiconductors are sold. High energy of short wavelength light damages window materials and lowers luminous efficiency. Nitto Optical introduces window materials made from CaF2 which prevents transmission decrease due to deterioration and enable customers to produce more reliable luminous and optical elements. In addition, Nitto Optical proposes high-efficient elements which convert the ultraviolet rays that cause deterioration into the visible light (blue). 1. Ultraviolet Ray Territory Transmission Sealed Glass Materia:l CaF2 Optical Character of CaF2 Monocrystal Transmittance Rate of CaF2 Monocrystal Abbe Number: 95 97 96 Low Refractive Index Low Dispersion Chromatic aberration 95 CaF2 2.00 1.95 ) 94 1.90 % ( e 1.85 R c 93 R G n 1.80 a G B t 1.75 t d B i 92 Quartz n m 1.70 s Quarts n 91 1.65 a r 1.60 T 90 1.55 CaF 2 89 1.50 1.45 Large SiO2 Short 88 1.40 100 90 80 70 60 50 40 30 20 87 General Glass CaF2 νd 255 305 355 405 455 505 555 605 655 705 Wavelength(nm) Comparison of Transmittance Rate with Quartz CaF2 Optical Character 2. Ultraviolet Ray Cut Blue Luminosity Sealed Glass Material:Impurities Addition CaF2 Luminous Character of Impurities Addition CaF2 Monocrystal 7000 ) 6000 s t i n wavelength convertion u y 5000 r a r t i b 4000 r A Exci tation spectrum Emission spectrum ( y t i 3000 s n e t n i 2000 e c n e c 1000 s e n i m 0 u L 250 300 350 400 450 500 550 Wavelength(nm) Luminous Character of Impurities Addition CaF2 3. CaF2 Optical Device The CaF2 material has excellent character which transmits the areas from vacuum ultraviolet to infrared rays. Nitto Optical proposes optical devices for the wavelength band which is not transmitted with a normal glass. 134nm Band Transmission Window/Lens Prism usable for Ultraviolet~Infrared Bands 100 100 95 80 90 ) ) % ( % ( e e 85 c c 60 n n a t a t t i t 80 i m m s n s 40 a n 75 r a r T T 70 20 Sample thickness:2mmt :2mmt 65 0 60 130 180 230 280 330 380 130 380 630 880 1130 1380 1630 1880 2130 2380 UV Spectrophotometer Wavelength(nm) Wavelength(nm) Transmittance Rate of Ultraviolet~Infrared Ranges Transmittance Rate of 134 nm Band Width -4- 04_000479(0380)日東光器/A裏_blu-ray(リーフ) Optics for Blu-ray Disc and HD DVD Nitto Optical has promptly started the optical part development for the optical pickup of a blue purple laser which is the record format of next generation large-volume optical disc. In addition, Nitto Optical meets customer's request for high-precision/-reliable optical coating for 3 wavelengths (780 nm, 650 nm, 405 nm) and high-power laser, from research to mass production. Design sample for 3 wavelengths 100 100 90 90 80 80 70 3wave 70 60 [%] Reflect Mirror 60 50 [%] 50 40 PDIC 40 0 ゜( 3 0゜) T s [ % ] 30 30 ゜ ゜ Reflectance 45deg Rs [%] ransmittans 0 ( 3 0 ) Tp[%] 20 T 45deg Rp[%] 20 10 10 0 0 350 450 550 650 750 850 3wave DBS 2wave DBS 370 470 570 670 [nm] [nm] Wavelength: B270 FM Wavelength:BK-7 Material 3wave 405nm Material Half Mirror 3wave PBS 785nm 660nm 10 0 100 100 90 90 90 80 80 80 45゜ Ts[%] 70 70 45゜ Tp[%] 70 60 60 60 0゜(30 ゜) Ts[%] 50 0deg Ts[%] [%] 50 [%] 50 0゜(30 ゜) Tp[%] [%] 0deg Tp[%] 40 40 40 30 30 30 20 20 20 Transmittans Transmittans 10 Transmittans 10 10 0 0 0 37 0 470 570 670 77 0 350 450 550 650 750 850 370 470 570 670 770 Wavelength [nm ] :WavelengthS-BS[nmM] 18 Wavelength [nm ] Material : B270 Material Material:BK-7 ZYGO-DVD400 1-14-18 Kudankita, Chiyoda-ku, Tokyo 102-0073, Japan TEL:+81-3-3511-8111 FAX:+81-3-3511-8110 E-MAIL:[email protected] URL:http://www.nitto-optical.co.jp/english/index.html 0606 -5- 04_000479(0380)日東光器/A表_プロジェクター(リーフ) Optics for Projectors The market of front projectors is expanding for a business presentation use recently. The growth of Home Theater and Large Rear-projection Television is also expected in the TV market in addition to business and education fields. Nitto Optical provides the key parts of prisms and filters for projectors. Flat PBS X- CUBE [BDM &RDM] 100 100 90 90 80 80 70 70 ] ] % 60 [ % [ e 60 e c c n n a t a t t i t 50 i 50 m m s s n n a a r r 40 T T 40 30 30 20 20 10 0 10 400 410 420 430 440 450 460 470 480 490 500 510 520 530 540 550 560 570 580 590 600 610 620 630 640 650 660 670 680 690 700 0 Wavelength[nm] 400 420 440 460 480 500 520 540 560 580 600 620 640 660 680 700 BDM Ts[%] BDM Tp[%] RDM Ts[%] RDM Tp[%] Wavelength[nm] 0Rs 0Rp 0Ts 0Tp -3Rs -3Rp -3Ts -3Tp +3Rs +3Ts +3Tp -5Rs -5Rp -5Ts -5Tp +5Rs +5Rp +5Ts X-Cube Prism for LCD and LCOS Projector P-S Converter Optics for Cameras and Scanners Currently, compact and SLR cameras are facing digitalization. Nitto Optical has been engaged in processing pentagonal prisms for SLR cameras since its foundation. The posture to manufacturing remains unchanged, even if an analog changes into digital style.
Recommended publications
  • Main Types of Lasers Used for Manufacturing- Key Properties and Key Applications
    Main Types of Lasers Used for Manufacturing- Key Properties and Key Applications Tom Kugler Fiber Systems Mgr. Laser Mechanisms, Inc. www.lasermech.com LME 2011 Topics • Laser Output Wavelengths • Laser Average Power • Laser Output Waveforms (Pulsing) • Laser Peak Power • Laser Beam Quality (Focusability) • Key Properties • Key Applications • Beam Delivery Styles 2 Tom Kugler- Laser Mechanisms Compared to standard light sources… • Laser Light is Collimated- the light rays are parallel to and diverge very slowly- they stay concentrated over long distances- that is a “laser beam” • Laser Light has high Power Density- parallel laser light has a power density in watts/cm2 that is over 1000 times that of ordinary incandescent light • Laser Light is Monochromatic- one color (wavelength) so optics are simplified and perform better • Laser light is highly Focusable- low divergence, small diameter beams, and monochromatic light mean the laser can be focused to a small focal point producing power densities at focus 1,000,000,000 times more than ordinary light. 3 Tom Kugler- Laser Mechanisms Laser Light • 100W of laser light focused to a diameter of 100um produces a power density of 1,270,000 Watts per square centimeter! 4 Tom Kugler- Laser Mechanisms Examples of Laser Types • Gas Lasers: Electrical Discharge in a Gas Mixture Excites Laser Action: – Carbon Dioxide (CO2) – Excimer (XeCl, KrF, ArF, XeF) • Light Pumped Solid State Lasers: Light from Lamps or Diodes Excites Ions in a Host Crystal or Glass: – Nd:YAG (Neodymium doped Yttrium Aluminum
    [Show full text]
  • Detection of Lead in Soil with Excimer Laser Fragmentation Fluorescence Spectroscopy (ELFFS)
    Detection of Lead in Soil with Excimer Laser Fragmentation Fluorescence Spectroscopy (ELFFS) J. H. Choi1, C. J. Damm2, N. J. O’Donovan1, R. F. Sawyer1, C. P. Koshland2, and D. Lucas3† 1Mechanical Engineering Department, University of California, Berkeley, CA 94720 2Science & Technology Department, Sierra Nevada College, NV 89451 3School of Public Health, University of California, Berkeley, CA 94720 4Environmental Energy Technologies Division, Lawrence Berkeley National Laboratory Berkeley, CA 94720 Date: 2/2/04 † Corresponding Author [email protected] PH: (510) 486-7002 FAX: (510) 486-7303 Index Headings: Photofragmentation; Fluorescence; Photochemistry; Plasma; Lead. 1 ABSTRACT Excimer laser fragmentation fluorescence spectroscopy (ELFFS) is used to monitor lead in soil sample and investigate laser-solid interactions. Pure lead nitrate salt and soil doped with lead nitrate are photolyzed with 193 nm light from an ArF excimer at fluences from 0.4 to 4 J/cm2. Lead emission is observed at 357.2, 364.0, 368.3, 373.9 and 405.8 nm. Time-resolved data show the decay time of the lead emission at 405.8 nm grows with increasing fluence, and a plasma is formed above fluences of 2 J/cm2, where a strong continuum emission interferes with the analyte signal. Fluences below this threshold allow us to achieve a detection limit of approximately 200 ppm in soil. INTRODUCTION Lead (Pb) poisoning from environmental and occupational exposure remains one of the most common and preventable diseases. There are numerous serious and detrimental health effects from inhalation or ingestion of lead, including poisoning or even death in extreme circumstances1. Various in situ, real-time methods to measure heavy metals in soil have been developed as a replacement for conventional wet-chemistry techniques that require laborious and time consuming processes, such as preparation, dissolution, chelation, and ion exchange2,3.
    [Show full text]
  • D'évaluation Des Technologies De La Santé Du Québec
    (CETS 2000-2 RE) Report – June 2000 A STATE-OF-KNOWLEDGE UPDATE THE EXCIMER LASER IN OPHTHALMOLOGY: Conseil d’Évaluation des Technologies de la Santé du Québec Report submitted to the Minister of Research, Science And Technology of Québec Conseil d’évaluation des technologies de la santé du Québec Information concerning this report or any other report published by the Conseil d'évaluation des tech- nologies de la santé can be obtained by contacting AÉTMIS. On June 28, 2000 was created the Agence d’évaluation des technologies et des modes d’intervention en santé (AÉTMIS) which took over from the Conseil d’évaluation des technologies de la santé. Agence d’évaluation des technologies et des modes d’intervention en santé 2021, avenue Union, Bureau 1040 Montréal (Québec) H3A 2S9 Telephone: (514) 873-2563 Fax: (514) 873-1369 E-mail: [email protected] Web site address: http://www.aetmis.gouv.qc.ca Legal deposit - Bibliothèque nationale du Québec, 2001 - National Library of Canada ISBN 2-550-37028-7 How to cite this report : Conseil d’évaluation des technologies de la santé du Québec. The excimer laser in ophtalmology: A state- of-knowledge update (CÉTS 2000-2 RE). Montréal: CÉTS, 2000, xi- 103 p Conseil d’évaluation des technologies de la santé du Québec THE EXCIMER LASER IN OPHTHALMOLOGY: A MANDATE STATE-OF-KNOWLEDGE UPDATE To promote and support health technology assessment, In May 1997, the Conseil d’évaluation des technologies de disseminate the results of the assessments and la santé du Québec (CETS) published a report dealing spe- encourage their use in decision making by all cifically with excimer laser photorefractive keratectomy stakeholders involved in the diffusion of these (PRK).
    [Show full text]
  • Patient Guide to Excimer Laser Refractive Surgery
    A Patients’ Guide to Excimer Laser Refractive Surgery July 2011 Contents 1. Introduction 2. Understanding your refractive error 3. Changing the eye’s focus by surgery (refractive surgery) 4. Indications and contraindications to refractive surgery 5. Assessment for excimer laser refractive surgery 6. The day of surgery 7. The period after surgery 8. Results 9. Complications 10. Standards for laser refractive surgery 11. Glossary Royal College of Ophthalmologists 2 1. Introduction Focusing (refractive) errors such as short-sightedness (myopia), astigmatism, and long-sightedness (hyperopia) are usually corrected by wearing spectacles or contact lenses. Over the years a number of surgical techniques have been used to treat refractive errors and reduce the need for glasses (Table 1.1). The most common treatment uses an excimer laser. The following information explains the different excimer techniques, their advantages and disadvantages and the various terms used. Its aim is to help you come to an informed decision about any prospective treatment. If you have any further questions, your ophthalmic surgeon who will be performing the treatment should answer them. There are other surgical techniques as well as using the excimer laser. These other techniques are summarised in Table 1. Some are much more commonly used than others. (Please see section 2 for an explanation of the focusing problems of the eye). Site of Treatment Technique Procedure Indications Corneal techniques Excimer laser PRK – Photo- Low, mod & high: Refractive myopia Keratectomy
    [Show full text]
  • Worldwide Market for Lasers Trends and Five-Year Forecast (2017 – 2023)
    The Worldwide Market for Lasers Trends and Five-Year Forecast (2017 – 2023) Table of Contents Chapter 1: Executive Summary & Totals ............................................................................................. 13 1.1 The Overall Laser Market ....................................................................................................... 13 1.2 Good News From 2017 .......................................................................................................... 13 1.3 Things Troubling in 2017 ....................................................................................................... 14 1.4 Historic Laser Revenue .......................................................................................................... 14 1.4.1 The Laser Market by Segment .......................................................................................... 15 1.5 Laser Market by Laser Type ................................................................................................... 20 1.5.1 Fiber Lasers .................................................................................................................... 21 1.5.2 Low-Power Diode Lasers .................................................................................................. 23 1.5.3 High-Power Laser Diodes ................................................................................................. 24 1.5.4 Solid-State Lasers ...........................................................................................................
    [Show full text]
  • Laser Disposal Guide
    Laser Disposal Guide Introduction Lasers have a finite lifetime, which is based on use, experimental needs or technological advances. The goal of this guide is to provide guidance for the laser user and in particular, the LBNL Surplus/Excess staff and EHS waste disposal staff when dealing with lasers at the end of their life cycle. For the purpose of this guide, we will break lasers into several different types: gas, solid-state rod, liquid, and semiconductor. Laser systems also come in a variety of sizes, which does not relate to their optical laser output. In addition, when a laser is disposed of, a power supply often travels with it. Standard electrical safety protocols adequately address the power supply and will not be addressed in this document. All lasers that utilize electricity as their main energy source and were manufactured prior to July 1, 2006, will most likely have Lead in their printed circuit boards. Therefore these boards need to be disposed of as electronic waste (e-waste). There are United States regulations such as export control and European Reduction of Hazardous Materials regulations, known as RoHS rules, that affect how and the manner surplus lasers are to be dealt with. Here is in California there is the CA Dept. of Toxic Substances. Document prepared by Ken Barat & Justine Woo April 2012 Page | 1 Table of Contents Action Points/Questions to Ask Yourself .....................................................................................................3 User Responsibilities ....................................................................................................................................3
    [Show full text]
  • A Mode Locked Uv-Fel
    578 P. Parvin et al. / Proceedings of the 2004 FEL Conference, 578-581 A MODE LOCKED UV-FEL P. Parvin* (AUT, IR-Tehran; AEOI-RCLA, IR-Tehran), G. R. Davoud-Abadi (AUT, IR-Tehran), A. Basam (IHU, IR-Tehran), B. Jaleh (BASU, IR-Hamadan), Z. Zamanipour (AEOI-RCLA, IR- Tehran), B. Sajad (AU, IR-Tehran), F. Ebadpour (AUT, IR-Tehran) Abstract FEL mode-locking phenomena for shorter wavelengths in An appropriate resonator has been designed to generate far-infrared and infrared range of spectrum [13, 14]. femtosecond mode locked pulses in a UV FEL with the In free-electron laser operating at the FIR and IR modulator performance based on the gain switching. The spectral regions, using a radio-frequency accelerator for gain broadening due to electron energy spread affects on the electron beam, when the electron pulse length can be the gain parameters, small signal gain γ0 and saturation of the same order as the slippage length or even shorter, intensity Is, to determine the optimum output coupling as the laser emits short pulses of multimode broad-band well. radiation [14]. INTRODUCTION On the other hand, Storage ring FEL represents a very Today, there is an increasing interest in the generation competitive technical approach to produce photons with of intense, tunable, coherent light in short wavelength these characteristics. After the first lasing of a storage region. Laser pulses of very short duration in UV/VUV ring FEL (SRFEL) in visible [15], the operation spectrum, find applications in large number of areas, such wavelength has been pushed to shorter values in various as analysis of transit-response of atoms and molecules, laboratories.
    [Show full text]
  • Article Aerosol Mass Spectrometry
    Atmos. Meas. Tech., 11, 4345–4360, 2018 https://doi.org/10.5194/amt-11-4345-2018 © Author(s) 2018. This work is distributed under the Creative Commons Attribution 4.0 License. Exploring femtosecond laser ablation in single-particle aerosol mass spectrometry Ramakrishna Ramisetty1, Ahmed Abdelmonem1, Xiaoli Shen1, Harald Saathoff1, Thomas Leisner1, and Claudia Mohr1,2 1Institute of Meteorology and Climate Research, Karlsruhe Institute of Technology, Karlsruhe, Germany 2Department of Environmental Science and Analytical Chemistry, Stockholm University, Stockholm, Sweden Correspondence: Claudia Mohr ([email protected]) Received: 29 September 2017 – Discussion started: 10 October 2017 Revised: 11 June 2018 – Accepted: 21 June 2018 – Published: 23 July 2018 Abstract. Size, composition, and mixing state of individual firing fs laser with the single-particle mass spectrometer em- aerosol particles can be analysed in real time using single- ploying the fs laser light scattered by the particle to trigger particle mass spectrometry (SPMS). In SPMS, laser abla- mass spectra acquisition. Generally, mass spectra exhibit an tion is the most widely used method for desorption and ion- increase in ion intensities (factor 1 to 5) with increasing laser ization of particle components, often realizing both in one power density (∼ 109 to ∼ 1013 W cm−2/ from ns to fs laser. single step. Excimer lasers are well suited for this task due At the same time, fs-laser ablation produces spectra with to their relatively high power density (107–1010 W cm−2/ larger ion fragments and ion clusters as well as clusters with in nanosecond (ns) pulses at ultraviolet (UV) wavelengths oxygen, which does not render spectra interpretation more and short triggering times.
    [Show full text]
  • Safe Handling of Excimer Laser Gases Lasers Lasers Safe Handling of Excimer Laser Gases Lowing Rules for the Safe Handling of ,--"
    Safe Handling ofExcimerLaser Gases The past decade has seen a pro­ used in the laser industry have pres­ tained and vented, one must qUickly found increase in excimer laser use. sures typically between 300psi and ascertain what went wrong and Processes using excimer laser~gen~ 3(x)()psi. At these pressures, an acci~ what laser gas is escaping into the erated UV wavelengths are now be~ dent causing the cylinder to fall room. Then make sure the ventila~ coming standard in semiconductor could shear an unprotected valve, tion system is on and that all person­ fabrication, materials processing causing the cylinder to simulate the nel are removed from the area. Don't and medical procedures. With the action ofan ungUided missile. A sec­ try to be a hero and stop the leak ofa proliferation of these refillable gas ond hazard also underestimated by toxic gas. lasers, the industry must not side­ laser gas users is found in the seem~ If anyone was exposed to toxic step or ignore a critical issue in their ingly benign gases such as He, Ne gases or shows evidence of suffoca~ successful utilization: that of safely and AI which can act as suffocants tion due to the lack of oxygen, ad­ storing and handling laser gases, It due to the displacementofoxygen. minister fIrst aid (Table I) and call a is in the best interests of the laser The two hazards most often asso­ physician immediately. community to fully understand ciated with the use of excimer gases First aid for inhalation of fluorine, what precautions should be taken to are the corrosivity and tOXicity ofthe hydrogen chloride and even carbon avoid serious accidents involving halogen component.
    [Show full text]
  • Comparative Mass Spectrometric Analyses of Photofrin Oligomers By
    JOURNAL OF MASS SPECTROMETRY J. Mass Spectrom. 34, 661–669 (1999) Comparative Mass Spectrometric Analyses of Photofrin Oligomers by Fast Atom Bombardment Mass Spectrometry, UV and IR Matrix-assisted Laser Desorption/Ionization Mass Spectrometry, Electrospray Ionization Mass Spectrometry and Laser Desorption/Jet-cooling Photoionization Mass Spectrometry Marshall M. Siegel,1* Keiko Tabei,1 Rushung Tsao,1 Michael J. Pastel,1 Ravindra K. Pandey,2 Stefan Berkenkamp,3 Franz Hillenkamp3 and Mattanjah S. de Vries4 1 Wyeth-Ayerst Research, Lederle Laboratories, Pearl River, New York 10965, USA 2 Photodynamic Therapy Center, Department of Radiation Biology, Roswell Park Cancer Institute, Buffalo, New York 14263, USA 3 Institute for Medical Physics and Biophysics, University of Munster,¨ D-48149 Munster,¨ Germany 4 Department of Chemistry, The Hebrew University, Jerusalem 91904, Israel Photofrin (porfimer sodium) is a porphyrin derivative used in the treatment of a variety of cancers by photodynamic therapy. This oligomer complex and a variety of porphyrin monomers, dimers and trimers were analyzed with five different mass spectral ionization techniques: fast atom bombardment, UV and IR matrix- assisted laser desorption/ionization, electrospray ionization, and laser desorption/jet-cooling photoionization. All five approaches resulted in very similar oligomer distributions with an average oligomer length of 2.7 0.1 porphyrin units. In addition to the Photofrin analysis, this study provides a side-by-side comparison of the spectra for the five different mass spectrometric techniques. Copyright 1999 John Wiley & Sons, Ltd. KEYWORDS: photofrin; photodynamic therapy; oligomer distribution; mass spectrometry; fast atom bombardment; matrix-assisted laser desorption/ionization; electrospray ionization; laser desorption/jet cooling photoionization INTRODUCTION cancers of the lung and esophagus, in Canada for bladder and esophageal cancer and in Japan for the early stages of lung, esophageal, gastric and cervical cancers.
    [Show full text]
  • Fundamentals of Matrix-Assisted Laser Desorption/Ionization Mass Spectrometry with Pulsed Infrared Lasers
    International Journal of Mass Spectrometry 226 (2003) 189–209 Fundamentals of matrix-assisted laser desorption/ionization mass spectrometry with pulsed infrared lasers Klaus Dreisewerd∗, Stefan Berkenkamp, Arne Leisner, Andreas Rohlfing, Christoph Menzel Institute of Medical Physics and Biophysics, University of Münster, Robert-Koch-Str. 31, D-48149 Münster, Germany Received 29 August 2001; accepted 10 August 2002 Abstract The fundamental work and current knowledge on the mechanisms of matrix-assisted laser desorption ionization with pulsed infrared lasers is reviewed and discussed, with a special emphasis on the work performed in the laboratory of the authors in the recent past. The role of the different relevant irradiation parameters (laser wavelength, laser pulse duration, irradiated area and laser fluence) and matrix properties (absorption, state of aggregation) in the MALDI process is summarized as well as results on the dynamic parameters of the expanding desorption plume. New results include an extension of former wavelength studies to the 10 ␮m wavelength range. Furthermore, a detailed analysis of matrix ion signals generated at infrared laser wavelengths around 3 and 10 ␮m is presented and compared to those generated by UV-MALDI, revealing a complex picture of the hitherto hardly understood IR-MALDI ionization mechanisms. Preliminary results from a photoacoustic study of the desorption process point to a prolonged material evaporation in case of liquid matrices and pulsed Er:YAG laser excitation. The combined description of the various fundamental work promotes the understanding of the IR-MALDI desorption and ionization processes and allows an assessment of possible solutions for current mass spectrometric limitations of the IR-MALDI method.
    [Show full text]
  • Factsheet Excimer Vs
    Comparison CO2 Laser vs. Excimer Laser CO2 laser in Ophthalmics Excimer laser in Ophthalmics A CO2 laser is a continuous laser that works at An Excimer laser is a puls laser that works at 193nm, 10.600nm wavelength. The engraving is performed which is low UV. The engraving is performed by a by evaporating material from the substrate. The phenomenon called “cold ablation”. The molecular required amount of heat is transmitted to the surface structure is cracked by condensed energy without in milliseconds which brings thermal stress to the applying any thermal effects to the surface. engraving area and its neighboring areas. Applying heat to organic substances leads to As no heat is transmitted, carbonisation can not carbonisation where the material is not evaporated. occur. The heat destroys the surface of finished and/or All coated substrates can be engraved with beautiful coated lenses like Transitions or Polarizers. results. The surfaces are not destroyed. The intense heat can cause microcracks and As no heat is applied during engravings the material cavities. During tinting pigments will accumulate in does not suffer any thermal stress, microcracks can these cavities, leading to unwanted disturbing not occur. The shape of all engravings is smooth and visibility of the engravings. even. Another problem is the “memory effect” that can be As the material is smoothly removed by cold found in a certain percentage of the lenses. Users ablation, no memory effect can be found. Re-heating experience disappearing engravings when a lens is the lenses has no effect on the engravings. Coating heated while tinting or coating.
    [Show full text]