DOCSLIB.ORG

A 918 Compact

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
A 918 Compact Wheeled Excavator A 918 Compact Generation 6 Operating Weight 38,600 – 43,200 lb Engine 154 HP (115 kW) Tier 4f Bucket Capacity 0.22 – 1.37 m³ Performance Economy Compact, Flexible – Perfect Combination A Sound Investment – Optimum Economy for Maximum Performance and Environmentally Friendly Operating Weight 38,600 – 43,200 kg Engine 154 HP (115 kW) Tier 4f Bucket Capacity 0.22 – 1.37 m³ 2 A 918 Compact Litronic Reliability Comfort Maintainability Competence, Consistency, Innovation – Ergonomic Excellence – Superior Cabin Service Every Step of the Way – Proven Experience Design for Operator Comfort and Wellbeing Simple, Fast and Reliable A 918 Compact Litronic 3 Performance Compact, Flexible – Perfect Combination for Maximum Performance Liebherr compact wheeled excavators are used on building sites all over the world. Machine opera- tors rely on the power, speed and compact dimensions of the excavator to achieve impressive per- formance, day in and day out. Whether on inner city building sites, in roadway construction, classic earthmoving or for digging trenches and laying pipes, more can be achieved faster with Liebherr compact wheeled excavators. 4 A 918 Compact Litronic Maximum Performance Precise Work Lifting More Working with Precision The intelligent structure of the uppercarriage and the separate The standard joysticks with proportional controls and the ex- mounting of the hoist cylinders permit a superior lift capacity – traordinary sensitivity of the hydraulic system enable preci- and this with a tail swing radius of about 6 feet. As a result, sion work at high speeds and simultaneous movements. This the A 918 Compact Litronic combines the flexible application means the machine operator can carry out the most chal- possibilities of a compact wheeled excavator with the perfor- lenging tasks in a short time, not only at reduced speed but mance of a standard wheeled excavator. They offer perfor- also with maximum performance output from the machine. mance and flexibility for every building site. Automatic Digging Brake Being Faster The automatic digging brake ensures that manual actua- The A 918 Compact Litronic enables a high working speed, tion of the brake pedal is no longer required, thus leading to even when driving and using attachments. Excavating, back- easier operation of the machine. When the accelerator pedal filling and profiling tasks can be completed faster, new tasks is in a neutral position and the machine is stationary, the dig- can be started sooner. The speed of the machine can be ging brake engages automatically. This results in faster work adjusted easily using the MODE switch for load lifting work processes and enhanced safety for the operator and the ma- or grading work. chine, particularly during operation with frequent relocation of the excavator. Furthermore, the automatic digging brake Joystick Steering can be linked with the automatic swing axle lock. When the With the optional joystick steering, the driver can steer the machine is deployed and working, the swing axle locks auto- wheeled excavator proportionally using the mini joystick. In matically and thereby provides optimum stability. this way, working and driving movements can be performed at the same time without having to change controls. More efficient operation for even greater productivity. Joystick with Proportional Control Digging Force Liebherr Tires • Good functionality with streamlined, • High digging and breakout force • Twin tires without intermediate ring ergonomic design in the field with offset lugs • 4-way mini-joystick enables versatile • Continuously high digging performance • Increased stability during work and less possibilities of control without having even in tough ground vibration when driving thanks to higher to encompass, for example steering, • More digging force for faster results tire inflation pressure outriggers or working tools • Better self-cleaning properties – even • Two buttons and a rocker switch also after a few yards – prevents soiling of the increase the number of functions track surface • Larger contact area for less ground pres- sure and higher traction on soft ground A 918 Compact Litronic 5 Economy A Sound Investment – Optimum Economy and Environmentally Friendly Liebherr compact wheeled excavators are machines that combine high productivity and compact flexibility with excellent levels of economy – and all this comes as standard from the factory. On re- quest, the efficiency of each wheeled excavator can be boosted further with a Liebherr productive bucket, a fuel-saving Liebherr hydraulic oil or a Liebherr quick coupling system, all of which provide more return from each operating hour. 6 A 918 Compact Litronic Maximum Efficiency Increased Productivity Fuel Efficiency and Exhaust Gas Aftertreatment Liebherr Working Tools and LIKUFIX The Liebherr D924 diesel engine helps to preserve the envi- To boost the productivity of its construction machines, ronment with low fuel consumption and reduced emissions. Liebherr offers a broad range of working tools for different For emission stage Tier 4f, Liebherr relies completely on an fields of application. Furthermore, the hydraulic excavators innovative SCR system from Liebherr, consisting of an SCR can also be equipped with the Liebherr LIKUFIX hydrau- (Selective Catalytic Reductions) system and no other com- lic quick coupling system. The combination of a hydraulic ponents such as a DPF (Diesel Particle Filter), DOC (Diesel Liebherr quick coupling system with the LIKUFIX coupling Oxidation Catalyst), or EGR (Exhaust Gas Recirculation). This block permits fast, safe changing of mechanical and hydrau- enables a 91 percent reduction of nitrogen oxide (NOX). The lic working tools from the operator’s cabin. This boosts pro- system reduces exhaust emissions without any compromise ductivity on average by 30 %. in performance. Efficient Management Engine Idling and Engine Shut-down LiDAT, Liebherr’s own data transmission and positioning sys- The standard automatic idling function reduces the engine tem, facilitates efficient management, monitoring and control speed to idle as soon as the operator takes their hand from of the entire fleet in terms of machinery data recording, data the joystick so that no hydraulic function is activated. Proxim- analysis, fleet management and service. All of the important ity sensors in the joystick levers restore the original engine machinery data can be viewed at any time on a web browser. speed as soon as the operator’s hand is moved towards the LiDAT provides you comprehensive work deployment docu- lever again. This ensures that the set engine speed is avail- mentation, greater availability thanks to shorter downtimes, able immediately. The result is a combination of fuel saving faster support from the manufacturer, quicker detection of and reduced noise levels. Operating costs can be reduced strain / overload and subsequently a longer service life of the even further with the optional automatic engine shut-down machine as well as greater planning efficiency. function. Max LPE Max [g/kWh] Min Output [kW]Output Specific fuel consumption Working range Engine speed [rpm] Perfect operating point with LPE Output Operating point without LPE Specific fuel consumption Low Fuel Consumption Thanks Liebherr Quick Coupling System Travel Drive to Intelligent Machine Control LIKUFIX • High tractive force for fast acceleration • Liebherr-Power Efficiency (LPE) optimizes • Faster and safer changing of mechani- on level ground and high end speed on the interaction of the drive components in cal and hydraulic working tools from the gradients terms of efficiency operator’s cabin • Reduces unproductive travel time between • LPE enables machine operation in the • Machine utilization increased to up to tasks and on the building site area of the lowest specific fuel use for less 90 % thanks to extended deployment • Faster on site – More productive consumption and greater efficiency with options the same performance • Visual and acoustic check of correct locking position of tool at quick coupling system by two proximity sensors A 918 Compact Litronic 7 Reliability Competence, Consistency, Innovation – Proven Experience Reliability offers safety. Safety that significantly influences the success of a project. In every situa- tion, Liebherr stands for safety – with reliable construction machines and customer-oriented sales and service partners. This means a Liebherr construction machine is exactly what it should be: an investment that pays off. 8 A 918 Compact Litronic High Machine Availability Greater Safety Quality and Competence Safety Our product experience, our understanding of technical de- In addition to the performance and economy of a wheeled sign and feedback from customers, sales and service form excavator, the other main focus is on the safety of person- the basis for the use of pioneering ideas and have always nel and the machine. A wide range of equipment such as been an integral part of our recipe for success. Key compo- pipe fracture safety devices on lifting and stick cylinders, load nents such as the electronic components, slewing ring, slew- holding valves on outriggers, lift limitation in height, overload ing drive and hydraulic cylinders are developed and manu- warning device, roll-over protection system (ROPS) and the factured in-house. Our great production depth guarantees emergency exit through the rear window deliver maximum the highest possible quality and allows the components to be safety for every job. coordinated
Load more

Recommended publications
  • Swing-Away Conveyor Assembly Manual
    Swing Away Conveyor Portable Grain Belt Conveyor Assembly Manual This manual applies to the following brands and models: Batco, Westfield WCX, and Hutchinson HCX: 2000 Series: 2065SA, 2075SA, 2085SA, 2095SA, 20105SA, 20110SA, 20120SA 2400 Series: 2465SA, 2475SA, 2485SA, 2495SA, 24105SA, 24110SA, 24120SA Original Instructions Read this manual before using product. Failure to Part Number: P1512114 R6 follow instructions and safety precautions can Revised: November 2018 result in serious injury, death, or property damage. Keep manual for future reference. New in this Manual The following changes have been made in this revision of the manual: Description Section Important note about using a second “Square Section 3.7. – Install the Spout Roller and Hex Roller washer”. on page 22 SWING AWAY CONVEYOR – PORTABLE GRAIN BELT CONVEYOR CONTENTS 1. Safety....................................................................................................................................................... 5 1.1. Safety Alert Symbol and Signal Words..................................................................................... 5 1.2. General Product Safety ............................................................................................................ 5 1.3. Moving Conveyor Belt Safety................................................................................................... 6 1.4. Rotating Parts Safety................................................................................................................ 6 1.5. Drives
    [Show full text]
  • Removal and Lnstallation of Torsion Bar on Rear Axle (Diagonal Swing Axle) 32.1
    Removal and lnstallation of Torsion Bar on Rear Axle (Diagonal Swing Axle) 32.1 Data Model Torsion Bar Rubber mount on torsion bar mounting Part No. I Oiameter PartNo. I Aoredia. I 107 326 20 65 1 ) 19 107 326 14 81 17.5-0.5 107 .024 (USA) 107 .044 (USA) 107 326 23 6521 1B 1 16 326 0B 81 16.5-0.5 1) Previous version 2) Present version Tightening torques Nm (kpm) Hexagonal bolts of torsion bar mounting M 12x 1.5 65 (6.5) (4.5) Ball joints f or torsion bar connecting rods M 10 45 Removal 3 D isconnect connecting rod ( 1 5) on right and lef t of torsion bar (Fig. 2l . 1 Jack vehicle up at rear. 2 On veh icles with level control , sepa rate con nect i ng rod l\ for level control (3) from the lever (6) on the torsion bar (Fig. 1). Fig.2 Fig. 1 1 0 Torsion bar 18 Rear spring pump level control 15a Ball joint of 23 Supplementary rubber sPring 81 Pressure line oil - (buffer 82 Pressure line level control spring-loaded brake unit connecting rod stop) - 16 Def lection plate C Return line level control - oil reservoir 7 Co n nect i ng rod 3 Level control (13) on and left of 3a Level control lever B Level control holder 4 Unscrew retaining clamp right 6 Lever on torsion bar 10 Torsion bar torsion bar mounting (Fig. 3). e Ax les Vo lu me 1 Supplement 4 Modification April 7 4 31011 at tt 1 Removal and lnstallation of Torsion Bar on Rear Axle 51.1 (Diagonat Swing Axte) lnstallation 8 Check the rubber mount (12) of the torsion bar mounting and the connecting rods (1 5) (Figs.
    [Show full text]
  • Octaviaheritage DRIVING DAY 1959-2019
    OctaviaHERITAGE DRIVING DAY 1959-2019 PRESS INFORMATION Octavia1959-2019 MODEL: OCTAVIA CODE: TYPE 968 INTRODUCED: 1959 BUILT: MLADÁ BOLESLAV KVASINY 1959-1971 2 CONTENTS INTRODUCTION 05 BACKGROUND 06 1959 OCTAVIA 07 OCTAVIA REBORN - MK1: 1996-2004 12 OCTAVIA MK2: 2004-2013 14 OCTAVIA MK3: 2013-PRESENT 16 ŠKODA UK HERITAGE FLEET 18 PRESS OFFICE CONTACTS 40 MODEL: OCTAVIA CURRENT CODE: TYP 5E INTRODUCED: 1996 VERSIONS: 96/04/13 BUILT: MLADÁ BOLESLAV 1996-PRESENT 3 OCTAVIA 1959 - 2019 4 OCTAVIA 1959 - 2019 INTRODUCTION The ŠKODA Octavia, the brand’s most successful model both globally and in the UK celebrates another remarkable milestone in 2019 – the 60th anniversary of its introduction. Originally designed to bring affordable and high-quality motoring to as many people as possible at an unbeatable price, the design and engineering philosophies behind the Octavia remain the same today. Over the years, the multi-million selling Octavia has proved itself to be one of the most adaptable and practical cars on the market. It has set Land Speed Records, been transformed into a title-winning rally car and become one of the most trusted cars used by our emergency services. While the Octavia has been a huge sales success around the world, the British have developed one of the strongest bonds with ŠKODA’s brilliant all-rounder. More than 500,000 examples have found loving homes on our shores since the very first 1959 model rolled onto UK roads. And, six decades later, it remains ŠKODA’s top-seller with a range that includes nine equipment levels, 14 engine and transmission options and two body styles.
    [Show full text]
  • VW Suspension Technical Article
    VW Tech Tip VW Suspension Technical Article Tech Tip: by Charles Adams The following is a technical THE TRUTH ABOUT SUSPENSIONS MYTH: Lowering or raising my car will give it greater performance than I article written for better If you want a smooth ride and not just looks, there is more than meets could expect at stock height. For ex- understanding of the rear the eye at a quick glance. Anyone ample if I simply lower my car it will corner better than my friend’s car that air-cooled VW suspension can lower or raise a vehicle and call it good, but just like any good en- is not lowered. Alternatively, if I raise as well as our products. For gine build, if you seek performance, my car it will perform better off road, absorbing bumps and jumps, than my the majority of people, the everything should be prepared in advance and every component’s friend’s car that is not raised. rear VW suspension is little function should be understood. It understood and more is more than just ordering the most FACT: Every suspension rides at its costly parts, assembling them, and greatest potential when it is riding often misunderstood. blowing away the competition. Yet within the parameters that it was suspensions are not a mystery and designed for. This means that facto- they certainly are not rocket science. ry suspensions perform the greatest The truth is that they are simply and when the ride at factory height and easily understood if they are ex- the geometry is not tampered with.
    [Show full text]
  • A Comparative Study of the Suspension for an Off-Road Vehicle
    International Research Journal of Engineering and Technology (IRJET) e-ISSN: 2395-0056 Volume: 07 Issue: 05 | May 2020 www.irjet.net p-ISSN: 2395-0072 A Comparative study of the Suspension for an Off-Road Vehicle Sivadanus.S Department of Manufacturing Engineering, College of Engineering – Guindy, Chennai ---------------------------------------------------------------------***--------------------------------------------------------------------- Abstract - Humans use different vehicles to travel in is set nothing can be adjusted or moved. This type of different terrains for comfort and ease of travel. An off-terrain suspension will not be considered in the scope of this project vehicle is generally used for rugged terrain and needs a largely due to its lack of adjustability. completely different dynamics in suspension comparison to an on-road vehicle. The aim of this project is to identify and Independent suspension systems provide more effective determine the parameters of vehicle dynamics with a proper functionality in traction and stability for off-roading study of suspension and to initiate a comparative study for an applications. Independent suspension systems provide flex off-road vehicle using different models. (the ability for one wheel to move vertically while still Key Words: Suspension, Vehicle Dynamics, Off-road allowing the other wheels to stay in contact with the Vehicle, Control arms, Camber surface). 1.INTRODUCTION There are many different versions and variations of independent suspensions, which include swing axle Suspension suspensions, transverse leaf spring suspensions, trailing and The role of a suspension system within a vehicle is to ensure semi-trailing suspensions, Macpherson strut suspensions, that contact between the tires and driving surface is and double wishbone suspensions. Control arms are used for continuously maintained.
    [Show full text]
  • Class-11.Pdf
    CLASS 11 OPEN WHEEL – Stock VW Sedans DEFINITION Vehicles must be a stock VW TYPE 1 sedan Revised – 02/20/2016 GENERAL REGULATIONS Entrants in this class shall comply with all applicable General reGulations. COMPETITION REGULATIONS Any questions concerninG chassis combinations will be decided by referring to VW factory parts manuals and/or VW of America booklet. This is a stock production class and all components must remain stock except for those modifications allowed herein. NOTE: The CR abbreviations listed under this class (I.E. CR1 HELMETS) refer to cross reference listings in the front of this book. These cross-referenced listings are part of the class rules. Where a conflict occurs between the cross-referenced listing and a rule contained under this class, the rule contained under this class has precedence. SAFETY EQUIPMENT CR1 HELMETS CR2 PROTECTIVE CLOTHING CR3 EYE PROTECTION and DENTURES CR4 FIRST AID KIT CR5 EMERGENCY SIGNALING DEVICES CR6 HORNS CR7 REFLECTORS CR8 FIRE SUPPRESSION EQUIPMENT CR9 SURVIVAL SUPPLIES SUSPENSION COMPONENTS Front Suspension Front axle torsion tube centers may be cut, rotated, rewelded to increase ground clearance or front torsion adjusters may be used. Original seams may be welded (not reinforced) on front beam. Shock tower may be additionally supported by the adding of a single gusset, gusset may not extend more than 2" above top torsion tube. Stock front spindles may be replaced with ANY aftermarket spindle. MUST keep stock wheel travel and track width. Stock LEGNTH trailing arms only. Sway bars may be removed. Filling of speedometer hole is permitted. Steering arm on spindle may be reinforced by welding a .25" gusset from the top of the spindle to the end of the steerinG arm.
    [Show full text]
  • 20 Transaxle Upgrades
    20 Transaxle Upgrades egardless of the size of your engine or the shine on your wheels, you can’t mate the two together with out a transmission. The transmission and its BUGPACK 3560 Cadillac Ave. associated parts are as important as headlights at night. After all, they help Costa Mesa, CA 92626 R (714) 979-4990 transmit (hence the name) all of that ground-pounded power to the road. Follow- Fax (714) 979-3468 ing is a collection of parts that no Volkswagen should be without. 6 Gene Berg’s five-speed Conversion Kit includes lengthened main and pinion 1 SoCal Imports’ heavy duty Rhino trans- shafts, a new intermediate and shift hous- mission case comes directly from the OE ing, new five-speed selector rods, special manufacturer in Brazil. Extra gussetting 3 GB 667 keys for fifth gear, an extra thrust along the central spine of the casting washer for fifth, a 5mm fifth shift fork, fifth makes this one tough case. stop washer, special pinion and mainshaft nuts, and all needed nuts, bolts and wash- ers. Instructions are also included for the 1 dauntless do-it-yourselfer. This system has undergone several revisions since its first prototype in 1965, and stands as the premier five-speed kit on the market today. Gene berg Enterprises 4 The answer to noisy steel transaxle mounts, these durable mounts are made 6 in-house by BUGPACK from top quality urethane. They feature steel sleeves are grade five hardware, and the manufactur- 2 Complete IRS axle assemblies are also er claims they are virtually indestructable.
    [Show full text]
  • Class 1/2-1600
    CLASS 1/2-1600 OPEN WHEEL - Restricted Suspension 1600cc DEFINITION Single or two seat vehicles limited to 1600cc VW engines and VW Type 1 suspension systems. GENERAL REGULATIONS Entrants in this class shall comply with all applicable general regulations. COMPETITION REGULATIONS This is a stock production class and all components must remain stock except for those modifications allowed herein. NOTE: The CR abbreviations listed under this class (I.E. CR1 HELMETS) refer to cross reference listings in the front of this book. These cross-referenced listings are part of the class rules. Where a conflict occurs between the cross-referenced listing and a rule contained under this class, the rule contained under this class has precedence. SAFETY EQUIPMENT CR1 HELMETS CR2 PROTECTIVE CLOTHING CR3 EYE PROTECTION and DENTURES CR4 FIRST AID KIT CR5 EMERGENCY SIGNALING DEVICES CR6 HORNS CR7 REFLECTORS CR8 FIRE SUPPRESSION EQUIPMENT CR9 SURVIVAL SUPPLIES SUSPENSION COMPONENTS Front Suspension Front suspension is based on VW Type 1 ball joint or link pin style. Any manufacturer’s beam of two (2) steel torsion tubes may be used but must remain stock VW width. Front axle torsion tube centers may be cut, rotated and rewelded to increase ground clearance. Torsion adjusters are allowed. Tube center spacing is open. Any manufacturer’s torsion bars are allowed. Front trailing arms (torsion arms) may be reinforced or replaced as long as stock VW width and length are retained. Suspension limiters are allowed. Spindles, link pins, ball joints, and shock mounting locations are open. Front suspension track width will be measured from wheel mounting face to wheel mounting face; the maximum width is 55.75 inches.
    [Show full text]
  • Wheeled Vehicle Drive Lines, Axles, and Suspension Systems
    DOCUMENT RESUME . ED 212 802 CE 031 196 TITLE Wheeled.Vehicle Drive Lines, Axles, and Suspension Systems. Military Curriculum Materials for Vocational and Technical Education. INSTITUTION Army Ordnance Center and School, Aberdeen Proving Ground, Md.; Ohio State ,Univ., Columbus. National Center for Research in Vocational Education. 'BMWS AGENCY Office of Vocational and Adult Education (ED), Washington, D.C. PUB DATE [81] NOTE 300p.; For related documents see CE 031 194-197. EDRS PRICE MF01/PC12 Plus Postage. DESCRIPTORS *Auto Mechanics; Correspondence Study; Engines; Experiential Learning; Independent Study; Inservice Education; JatioTrainingi Learning Modules; *Military Training; *Motor Vehicles; Postsecondary Education'; *Repair; Secondary Education; *Technical Education; Vocational Education IDENTIFIERS Axles; Military Curriculum-Project; *Suspension Systems (Automotive) ABSTRACT This course is one of several sub6ourses thatmake up the entire Army correspOndencecourse on wheeled.vehicle maintenance. The subcrse is designed to provide the student with information about the o ation, malfunction diagnosis, maintenance, and repair of wheeled vehicle drive lines, axles, and suspensionsystems. It provides the basic theory, and also includes on-the-jobtask assignments. The subcourse is divided into six lessons coveringthe following topics: propeller shaft assemblies; introductionto axle assemblies; maintenance of axles; introduction to suspensionsystem components; maintenance of springs, shock absorbers, andframes; and maintenance of tires and wheels. Each lesson contains objectives, text, task assignments, and review exercises. Answers for the exercises are provided after the final lesson, along withan examination and application task test. This subcourse is designedfor student self-study, but could be used in smallgroup learning situations. (KC) *********************************************************************** *. Reproductions supplied by EDRS are the best thatcan be made * * from the original document.
    [Show full text]
  • WM, Rider 11, Rider 13, Rider 11 Bio, Rider 13 Bio, Rider 16
    Workshop manual Rider 11, Rider 13, Rider 11 Bio, Rider 13 Bio, Rider 16 English Svenska – 31 Sve-5 225/232/235 Bruk 31 97-11-25, 08.46 Workshop manual Rider 11, Rider 13 Rider 11 Bio, Rider 13 Bio Rider 16 Contents Safety regulations ............................................... 2 Checking and adjusting throttle control .......... 29 General instructions ......................................... 2 Checking and adjusting freewheel clutch ....... 30 Special instructions .......................................... 2 Replacing articulated steering bearing ........... 30 Special tools ........................................................ 3 Removal of swing axle ................................... 32 Technical data ..................................................... 4 Replacing bushings ........................................ 32 Play .................................................................. 4 Installation of swing axle ................................ 33 Tightening moments......................................... 4 Removal/installation of gear box .................... 34 Mowing deck .................................................... 5 Removal/installation of hydrostatic Control points ................................................... 5 transmission ................................................... 34 Delivery and dealer service ................................ 6 Replacing hydrostat. trans. axle seals ........... 35 Maintenance schedule ........................................ 8 Input axle .................................................
    [Show full text]
  • C2.Saaa/ C /7772W2
    June 7, 1966 J. C. VITTONE 3,254,902 AUTOMOTIVE ANTI-SWAY BAR Fillied June 30, 1964 INVENTOR. c2.saaa/ C /7772W2 1.772.6/v2/ 3,254,902 United States Patent Office Patented June 7, 1966 2 3,254,902 as in my said earlier patent. It passes below the trans AUTOMOTIVE ANTI-SWAY BAR mission case 11 at a certain spacing distance or clearance, Joseph C. Vittone, P.O. Box 169, Riverside, Calif. as shown, and, in a well-known swing-axle automobile Filed June 30, 1964, Ser. No. 379,204 of European manufacture, passes directly below the oil 3 Claims. (C. 280-124) drain plug 13 in the bottom of the transmission case. The ends of the bar or spring 12 are rolled to form This invention relates generally to flat or leaf spring eyes 14, and in these eyes are mounted rubber bushings type anti-sway or stabilizer bars for Swing-axle auto 15, which receive bolts 16. Each bolt 16 passes through mobiles. metal eyelets 17 in the two ends of a fabric stirrup 18, Such devices contribute stability and reduce sway in O formed typically of strong rayon or nylon belting or the swing-axle automobiles under various conditions such like. The stirrup is looped over the corresponding end as on turns, in gusty winds and on rough roads. These portion 10a of the axle housing, and bolt 16 then in advantages are known in the art. Reference may be serted and fastened by nut 19. had to my prior Patent No. 2,992,835 for a disclosure A rubber pad 20 is placed between each cylindrical and discussion of such a device.
    [Show full text]
  • Department of Transportation National Highway Traffic Safety Administration
    Friday, January 12, 2001 Part XIII Department of Transportation National Highway Traffic Safety Administration 49 CFR Part 575 Consumer Information Regulations; Federal Motor Vehicle Safety Standards; Rollover Resistance; Final Rule VerDate 11<MAY>2000 22:28 Jan 11, 2001 Jkt 194001 PO 00000 Frm 00001 Fmt 4717 Sfmt 4717 E:\FR\FM\12JAR10.SGM pfrm02 PsN: 12JAR10 3388 Federal Register / Vol. 66, No. 9 / Friday, January 12, 2001 / Rules and Regulations DEPARTMENT OF TRANSPORTATION reached by phone at (202) 366±5559 or note vehicles that are equipped with by facsimile at (202) 493±2739. For ``electronic stability control'' National Highway Traffic Safety public comments and other information technology, which may reduce the risk Administration related to previous notices on this of a vehicle getting into an incipient subject, please refer to: rollover situation. 49 CFR Part 575 DOT Docket No. NHTSA±2000±6859, The agency requested comments on Docket Management, Room PL±401, 400 its tentative decision to implement such [Docket No. NHTSA±2000±8298] Seventh Street, SW, Washington, D.C. a program on June 1, 2000.1 The closing Consumer Information Regulations; 20590 (hours 10:00 a.m. to 5:00 p.m. date for comments was August 30, 2000. Federal Motor Vehicle Safety Monday through Friday) or on the Twenty-five commenters responded. Standards; Rollover Resistance internet at www.dms.gov/search, and This notice addresses the major issues Docket No. 91±68; Notice 3, NHTSA presented by the commenters, our AGENCY: National Highway Traffic Docket, Room 5111, 400 Seventh Street, response to those comments, and the Safety Administration (NHTSA), DOT.
    [Show full text]