DOCSLIB.ORG

Cleaners & Screen Openers

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Cleaners & Screen Openers CLEANERS & SCREEN OPENERS The most complete range AlbaChem® AlbaChem® of textile care sprays and Spot Lifter Ii Citrus Screen liquids. AlbaChem keeps Opener production running smoothly. No. 1674A Net Wt. 17 oz. No. 1634 Cleaners, lubricants and (482 grams) Net Wt. 15 oz. adhesives for apparel (424 grams) manufacturing, upholstery, embroidery, dry cleaning, MOST POWERFUL POWDERED SPOT REMOVER • Opens clogged screens screen printing and all • Spray On - Let Dry - Brush Off • Leaves no film • Emulsion safe textile applications. • Does not contain methylene chloride. • SMELLS GREAT! Great for screen printers when spot cleaning Powerful citrus based cleaner instantly opens AlbaChem® on dark colored goods, removes the “rings”. Use on all clothing and textiles. clogged screens while still on press with a pleas- PSR & PSR II ant citrus scent. Dissolves most types of inks, Removes; grease, oil, food, dirt, tar, graphite Powdered Dry fresh or old. Great for spot clean-ups in hard to and more from clothing, carpets, upholstery, reach corners. For use on photographic stencils Cleaning Fluid auto interiors, wallpaper, bedding, etc. or water soluble hand cut film only. Also cleans No. 1060 ® ink, dirt and oil from printing presses. VOC Compliant for AlbaChem all states. Multi-Purpose No. 1062 Cleaner / AlbaChem® Not for sale in VOC Degreaser Water-Based regulated states. Screen Opener Net Wt. 12.5 oz. No. 1677 (354 grams) Net Wt. 14 oz. No. 1632 (396 grams) Net Wt. 19 oz. • Removes grease and oil stains from all (539 grams) fabrics • Removes “rings/circles” • Adhesive remover • Spot remover • Contains no chlorinated solvents • Paint/ink/graffiti remover • Parts & machinery cleaner degreaser • Works on all water-based inks • Safe to use on acetates • Leaves no film • Fast acting Fantastic multi-purpose solvent cleaner for • Spray On - Let Dry - Brush Off • Opens clogged screens both fabrics & hard surfaces. Good for use AlbaChem PSR & PSR II remove tough stains on “dry clean only fabrics” (except acetates). AlbaChem 1632 safely opens clogged screen from all fabrics without harming delicate fibers. Cleans and degreases machinery, removes of dried in water based inks. The foaming Unlike other powdered sprays PSR & PSR II uncured screen print ink from fabric and cleaner works fast without leaving any film or contain no chlorinated solvents, are non-toxic presses. This versatile product does not oily residue. AlbaChem water based Screen and requires no cancer warnings. PSR has a contain any chlorinated solvents. VOC Free. Opener may also be used to clean ink and dirt low odor, will not “ring”, and dries quickly. Use from printing presses. on all fabrics including: silk, satin, cotton, wool, ® taffeta, acetates and more. AlbaChem Clear Screen™ Screen Opener AlbaChem® AlbaChem® Big Shot Foaming No. 1641 Duster Spray Leather & Vinyl Net Wt. 14 oz. (397 grams) N.º 1340 Cleaner Net Wt. 12 oz. (340 grams) No. 1550 Net Wt. 17.5 oz. • Opens clogged screen • Emulsion safe . (496 grams) • Leaves no film • Fast acting • Blasts away dust and dirt • Works on almost all Inks • Great for computers, electronics, machinery AlbaChem Clear Screen instantly unclogs any Removes dirt, grime and scuff marks from screen while still on the press. Dissolves all • Clean, dry and odorless both leather & vinyl surfaces. The product types of ink, fresh or old. It is great for spot Remove tab on top of nozzle and connect does not leave any noticeable residue. It is cleanups in hard to reach corners. For use on extension straw. Do not shake can. Hold great for furniture, shoes, clothing and photographic stencils or water soluble hand can upright when using. Spray surface to automotive uses. Safe for use on most cut film only. Clear Screen works fast and be cleaned in short bursts from around 3 vinyl and leather surfaces. efficiently to reduce owntime.d inches to blow away dust, dirt and debris. LUBRICANTS & SPECIALTY ADHESIVES AlbaChem® AlbaChem® AlbaChem® ALBA-5 ALBA WASH Embroidery Lubricant Hook Cleaner/ Adhesive Lubricant No. 1605 No. 1076 No. 1615 Net Wt. 6.84 oz. Net Wt. 10 oz. Net Wt. 11 oz. (194 grams) (283 grams) (311 grams) • Precision metered oil release • Cleans and lubricates rotary hooks A fine mist adhesive that is great for all • Will not drip or run • Use on embroidery machines and parts embroidery applications. It will not stick • 100% Clear lubricating oil • Removes oil, grease and dirt to sewing machine needles. Provides • Great for embroidery, sewing and all textile • Prevents corrosion and oxidation a great temporary bond for appliqués. Use for machine appliqué, quilting and machinery Alba Wash is a combination solvent cleaner • Applies a drop at a time! embroidery. Great for basting quilt layers and mineral oil based solution. It allows you in preparation for quilting. Holds stabilizing The unique metering system sprays one drop of oil to thoroughly clean and flush rotary hooks, interface in place for machine embroidery. each time you depress the button. Using the ex- needle cases other parts/assemblies in tension tube, the oil goes exactly where you want Repositionable, clear, non-staining, no your embroidery machinery. Alba Wash it. No excess oil is wasted. No stain causing drips. methylene chloride. will remove grease, dirt, adhesives, lint and other contaminants which can lead to AlbaChem® thread breakage and machinery problems. Fabric Seal It leaves a clear lubricating film and is safe Anti-Fray Spray for use on metal & plastic surfaces. Regular cleaning with Alba Wash will help to keep your machinery running smoothly. No. 1074 AlbaChem® Net Wt. 10 oz. SUPER 88 (283 grams) Adhesive AlbaChem® • Prevents fabric unraveling, thread slippage Eco Mist Adhesive No. 1088 & reduce seam failure Net Wt. 13 oz. • Eliminates over-edge stitching (369 grams) Great cutting room product, seals edges to No. 1782 reduce fraying. Net Wt. 12 oz. (340 grams) Not for sale in California. No. 1782C • Super strong tack • High coverage Net Wt. 12 oz. • Less frequent re-application AlbaChem® (340 grams) • Bonds everything; cloth, wood, foam, SAFE-T-TACK For California. film, plastic, cardboard ADHESIVE • Mist spray pattern Many Uses: • “Flashable” screen print pallet and No. 1788 embroidery adhesive • Screen printing Net Wt. 12 oz. • Photographic spplications (340 grams) • Great for cutting rooms • Art projects • Pressure sensitive • Embroidery • Will not transfer • Water Based Pallet Adhesive • Applying insulation • VOC Compliant & Odorless • Does not contain hexane • No Petroleum Solvents • Furniture & upholstery • Tack Re-Activated with Water AlbaChem Eco Mist Adhesive is all purpose AlbaChem Super 88 applies more adhesive • Great for Flash Applications! textile adhesive spray. Good for screen solids for obtaining a strong bond using less SAFE-T-TACK is a water based adhesive spray printers, embroiderers, and apparel adhesive. It is great in applications where a for holding textiles to pallets during screen manufacturers. Flash Resistant (for screen light mist adhesive does not provide enough printing. It does not contain hazardous printers), low odor, minimal overspray. tack. Super 88 is water resistant, presents petroleum solvents making it much safer to 1782 is a great pattern hold adhesive (for a fast tack and will not wrinkle most porous use than traditional aerosol sprays. apparel manufacturers). surfaces or fabrics. PALLET & FOAM ADHESIVES AlbaChem® AlbaChem® AlbaChem® Premium Premium Premium Flash Adhesive Mist Web No. 1786 Adhesive Adhesive Net Wt. 13 oz. (368 grams) No. 1787 No. 1783 No. 1786C Net Wt. 14 oz. Net Wt. 13 oz. (397 grams) Net Wt. 13 oz. (368.5 grams) (368 grams) For California. • Stable at high temperatures • Super strong tack • Ideal for all screen printing applications. • Less frequent re-application • Stable at high temperatures • Will not transfer • Repositionable • Will not transfer • Less frequent re-application • Clear • Non-staining • Non-chlorinated • Maintains tack with multiple flashes • Great for screen printing applications WEB SPRAY PATTERN • Mist spray pattern • Mist spray pattern Special purpose adhesive spray designed AlbaChem Premium Flash adhesive has AlbaChem Premium Mist applies more for tacking textiles to the pallet during both a good cold tack and a great hot adhesive solids for obtaining a strong screen printing. The unique webbing spray tack. The unique mist spray is activated by bond using less adhesive. It is great in pattern dries quickly providing a longlasting a heat flash. The tack increases each time applications where a light mist adhesive tack that will not transfer onto the screen you flash the pallet greatly reducing the does not provide enough tack. AlbaChem printed garment. Unlike mist adhesive need for reapplication. It will not become Premium Mist Adhesive is heat stable, sprays, Premium Web Adhesive will not “gummy” from a flash. Great for automatic water resistant, presents a fast tack and loose its tack when printing on fleece or presses with multiples flashes. will not wrinkle most porous surfaces or other materials that may leave a coating fabrics. over the adhesive. Will not stain or soak through fabrics. ® AlbaChem AlbaChem® DRI-WEB DRI-WEB ® Pallet Adhesive AlbaChem Foam Adhesive Headliner Adhesive No. 1175 No. 1075 Not for sale in Not for sale in California. No. 1875 VOC regulated states. No. 1975 Net Wt. 12.5 oz. Net Wt. 11.75 oz. For sale in California. (354 grams) (333 grams) Net Wt. 12 oz. (340 grams) • Ideal for fleece. • Very fast drying • Ideal for all foam bonding applications. • Strongest Bond for headliners • Best web spray for screen printing. • Instant grab • Repositionable • Clear • Non-staining • Great for automotive, marine & The unique webbing spray pattern dries upholstery applications quickly providing a long lasting tack that • Non-chlorinated • Bonds to plastic, wood and metal will not transfer onto the screen printed • Web spray pattern garment. Bonds: • Foam to Foam • Withstands high temperatures • Water resistant Dri-Web will not lose its tack when printing • Foam to Fabric on fleece or other materials that may leave • Foam to Wood • Adjustable Spray Pattern a coating over the adhesive.
Load more

Recommended publications
  • Convertible Collar Construction
    Convertible Collar Construction Directory Click any image to go to that section Yoke/Facing Options: Intro and Gallery By far the most common set-up for a The purpose of this introductory section is to convertible-collar shirt is that it has front facings feature and compare the range of other options and a yoke, and that these two details don’t touch, also, if less commonly, in use beyond this classic as in the example at right. one, before I proceed to work step-by-step through a handful of useful variants . Many other possible That is, the facings don’t extend far enough combinations, and of course, variations on the towards the shoulders at the neckline that they’ll ones here, are conceiveable and may suit your meet with or join to the fronts of the yoke layers. As project better, so feel free to experiment. a result, the yoke construction steps aren’t integrated into the collar steps and are completed, in front at least, before the collar is begun, so the options for using the yoke as a back facing are eliminated. The steps for this classic arrangement are described below in Variation #5, in the Front Facing Only category. Collar Insertion Options Step-By-Step No Yoke or Facings Required Front facings Only Front and Back Facings, or Yoke Used as Facing Variation 1: Collar Applied as Band Variation 3: Collar’s Back Neckline Edge-Stitched Variation 6: Back Facings 1 3 and Facings Secured at Shoulder Seams 6 Options: Options: 1. Edge-stitched neckline 2.
    [Show full text]
  • 2019 Walking/Racking/Mountain Horse Division
    2019 WALKING/RACKING/MOUNTAIN HORSE DIVISION Contents General Division Rules Walking Horse Division: • Walking Horse Class Descriptions • Walking Horse General Class Rules • Shoeing Requirements • Tack & Attire • Criteria for Judging Walking Horse Classes Racking Horse Division: • Racking Horse Class Descriptions • Racking Horse General Class Rules • Shoeing Requirements • Tack & Attire • Criteria for Judging Racking Horse Classes Mountain Horse Division: • Mountain Horse Class Descriptions • Mountain Horse General Class Rules • Shoeing Requirements • Tack & Attire • Criteria for Judging Mountain Horse Classes Classes open to all Walking, Racking, and Mountain Horses • Showmanship • Standards for Showmanship • W/R/M English Equitation • Standards for W/R/M English Equitation • W/R/M Bareback Equitation • Standards for W/R/M Bareback Equitation • W/R/M Stock Seat Equitation • Standards for W/R/M Stock Seat Equitation WRM-1 Open Invitational Class – Ground Handling - open to all breeds and disciplines. Rules are posted separately. General Division Rules: Horses are to be divided into three divisions: Walking, Racking, and Mountain Horse classes. All horses will show together in Showmanship and in the Equitation Classes. Showmanship is divided according to the age of the 4-H’er. Equitation classes include Jr. & Sr. W/R/M English Equitation, Jr. & Sr. W/R/M Bareback Equitation, and Jr. & Sr. W/R/M Stock Seat Equitation. Smooth gaited mules are allowed in any division and are expected to follow division rules. All 4-H’ers riding or driving horses at 4-H events or activities are required to wear an ASTM-SEI Equestrian Helmet at all times. Cruelty, abuse or inhumane treatment of any horse in the show ring or in the stable area will not be tolerated by the show management, and the offender will be barred from the show area for the duration of the show.
    [Show full text]
  • Stitch Setting Chart
    STITCH SETTING CHART STITCH SETTING CHART The following chart shows information for each utility stitch concerning applications, stitch lengths, stitch widths, and whether or not the twin needle mode can be used. Stitch width Stitch length Presser foot [mm (inch.)] [mm (inch.)] Twin Stitch Stitch name Applications needle Auto. Manual Auto. Manual Straight stitch General sewing, gather, pintuck, (Left) etc. Reverse stitch is sewn while 0.0 0.0 - 7.0 2.5 0.2 - 5.0 OK pressing “Reverse/ (0) (0 - 1/4) (3/32) (1/64 - 3/16) ( J ) Reinforcement Stitch” button. Straight stitch General sewing, gather, pintuck, (Left) etc. Reinforcement stitch is sewn 0.0 0.0 - 7.0 2.5 0.2 - 5.0 OK while pressing “Reverse/ (0) (0 - 1/4) (3/32) (1/64 - 3/16) ( J ) Reinforcement Stitch” button. Straight stitch General sewing, gather, pintuck, (Middle) etc. Reverse stitch is sewn while 3.5 0.0 - 7.0 2.5 0.2 - 5.0 OK pressing “Reverse/ (1/8) (0 - 1/4) (3/32) (1/64 - 3/16) ( J ) Reinforcement Stitch” button. Straight stitch General sewing, gather, pintuck, (Middle) etc. Reinforcement stitch is sewn 3.5 0.0 - 7.0 2.5 0.2 - 5.0 OK while pressing “Reverse/ (1/8) (0 - 1/4) (3/32) (1/64 - 3/16) ( J ) Reinforcement Stitch” button. Triple stretch General sewing for 0.0 0.0 - 7.0 2.5 1.5 - 4.0 OK stitch reinforcement and decorative (0) (0 - 1/4) (3/32) (1/16 - 3/16) ( J ) topstitching Stem stitch Reinforced stitching, sewing and 1.0 1.0 - 3.0 2.5 1.0 - 4.0 OK decorative applications (1/16) (1/16 - 1/8) (3/32) (1/16 - 3/16) ( J ) Decorative Decorative stitching, top 0.0 0.0 - 7.0 2.5 1.0 - 4.0 OK stitch stitching (0) (0 - 1/4) (3/32) (1/16 - 3/16) ( J ) Basting stitch Basting 0.0 0.0 - 7.0 20.0 5.0 - 30.0 NO (0) (0 - 1/4) (3/4) (3/16 - 1-3/16) Zigzag stitch For overcasting, mending.
    [Show full text]
  • Facts About Fitting Agricultural Extension Service
    South Dakota State University Open PRAIRIE: Open Public Research Access Institutional Repository and Information Exchange SDSU Extension Circulars SDSU Extension 1960 Facts about Fitting Agricultural Extension Service Follow this and additional works at: http://openprairie.sdstate.edu/extension_circ Part of the Agriculture Commons Recommended Citation Service, Agricultural Extension, "Facts about Fitting" (1960). SDSU Extension Circulars. 618. http://openprairie.sdstate.edu/extension_circ/618 This Circular is brought to you for free and open access by the SDSU Extension at Open PRAIRIE: Open Public Research Access Institutional Repository and Information Exchange. It has been accepted for inclusion in SDSU Extension Circulars by an authorized administrator of Open PRAIRIE: Open Public Research Access Institutional Repository and Information Exchange. For more information, please contact [email protected]. • Extension Circular 593 FITTING \ ' ' ' ' ' ' ' ' .,,_-, ' , ...... ' ' I ' \ \ ' ' I • ' ' ' ' ..... -- -- ' - COOPERATIVE EXTENSION SERVICE SOUTH DAKOTA STATE UNIVERSITY, BROOKINGS U. S. DEPARTMENT OF AGRICULTURE FACTS ABOUT • • • F I T T I N G A garment that fits well looks as if it "belongs" to are square shoulders, wide shoulders, narrow sloping . he wearer. Such a garment adapts itself to the stand- shoulders, rounded shoulders in the back, prominent ing, sitting, and moving positions of the person wear- back hips or side hips, sway back ( exaggerated hollow ing it. It is neither too loose nor too tight and it feel s at the waistline), large upper arm, very thin arms, and looks comfortable. It brings out the good points in short or long arms, short or long waist. the individual's figure and skillfully hides poor ones. Insuring a good fit may depend on fitting after the Begin With the Pattern basic fitting dress is cut and basted or after the ready- it is important then, if you are going to make a gar- made dress is bought.
    [Show full text]
  • Instruction Manual
    INSTRUCTION KE-430FX II MANUAL KE-430FS II BE-438FX II Please read this manual before using the machine. Please keep this manual within easy reach for quick reference. ELECTRONIC DIRECT DRIVE LOCKSTITCH BAR TACKER ELECTRONIC DIRECT DRIVE LOCKSTITCH BUTTON SEWER Thank you very much for buying a BROTHER sewing machine. Before using your new machine, please read the safety instructions and the explanations given in the instruction manual. With industrial sewing machines, it is normal to carry out work while positioned directly in front of moving parts such as the needle and thread take-up, and consequently there is always a danger of injury that can be caused by these parts. Follow the instructions from training personnel and instructors regarding safe and correct operation before operating the machine so that you will know how to use it correctly. KE-430FX II/KE-430FS II, BE-438FX II SAFETY INSTRUCTIONS 1. Safety indications and their meanings This instruction manual and the indications and symbols that are used on the machine itself are provided in order to ensure safe operation of this machine and to prevent accidents and injury to yourself or other people. The meanings of these indications and symbols are given below. Indications The instructions which follow this term indicate situations where failure to follow the DANGER instructions will result in death or serious injury. The instructions which follow this term indicate situations where failure to follow the CAUTION instructions could cause injury when using the machine or physical damage to equipment and surroundings. Symbols ･･････ This symbol ( ) indicates something that you should be careful of.
    [Show full text]
  • No More Having
    Here is your key to adjusting those store-bought tops, dresses, and formal gowns so you can actually wear them! No more having to pass up a beautiful garment because it is too low, strapless, or sleeveless! With these instructions you’ll be able to take a piece of clothing from immodest to modest in half an hour or less. The first solution for a low necked top is to fill it in with either a panel of stretch lace trim or an insert of cotton knit (generally suitable for knits or stretchy lace garments only.) The second option is to adjust the shoulder seams to pull the neckline up higher. I’ve given detailed instructions for this alteration on a couple different styles of tops. With either of these methods you can easily make a neckline three or four inches higher! Method 1 Filling in a V-Neckline with a Panel of Fabric You will need: ¼ yard of 100% cotton knit fabric (interlock or jersey) - preshrunk Thread to match the garment Basic sewing supplies (pins, measuring tape, ruler, etc.) Fabric marker Here we have a v-neck knit top that is way too low to wear. 1. 2. 1. Measure from the lowest part of the neckline to the point you want the neckline to be filled in to. Mark with a pin. 2. Using the pin as your reference point, measure across the width of the neckline, adding at least ¾ of an inch on each side for seam allowance. 3. With these measurements in hand, we can now cut our panel out of the fabric.
    [Show full text]
  • Textile Treatments Offer the Following Features
    Shin-Etsu Chemical Co., Ltd. TextileXxxxx Xxxxx XxxxxTreatments Xxxxx Xxxxx Silicone Division Sales and Marketing Department Ⅰ 6-1, Ohtemachi 2-chome, Chiyoda-ku, Tokyo, Japan Phone : +81-（0）3-3246-5132 Fax : +81-（0）3-3246-5361 Xxxxx Xxxxx Xxxxx Shin-Etsu Silicones of America, Inc. Shin-Etsu Singapore Pte. Ltd. 1150 Damar Drive, Akron, OH 44305, U.S.A. 4 Shenton Way, #10-03/06, SGX Centre Ⅱ , Singapore 068807 Phone: +1-330-630-9860 Fax: +1-330-630-9855 Phone : +65-6743-7277 Fax : +65-6743-7477 Water repellency Shin-Etsu do Brasil Representação de Shin-Etsu Silicones India Pvt. Ltd. Produtos Químicos Ltda. Flat No. 712, 7th Floor, 24 Ashoka Estate, Rua Coronel Oscar Porto, 736 11°Andar – 114/115 Barakhamba Road New Delhi - 110001, India Paraiso São Paulo – SP Brasil CEP: 04003-003 Phone : +91-11-43623081 Fax : +91-11-43623084 Phone : +55-11-3939-0690 Fax : +55-11-3052-3904 Shin-Etsu Silicones (Thailand) Ltd. 7th Floor, Harindhorn Tower, 54 North Sathorn Road, Shin-Etsu Silicones Europe B. V. Bangkok 10500, Thailand Bolderweg 32, 1332 AV, Almere, The Netherlands Phone : +66-(0)2-632-2941 Fax : +66-(0)2-632-2945 Phone : +31-(0)36-5493170 Fax : +31-(0)36-5326459 Germany Branch Shin-Etsu Silicone International Trading Rheingaustrasse 190-196, 65203 Wiesbaden, Germany (Shanghai) Co., Ltd. Phone : +49-(0)611-962-5366 Fax : +49-(0)611-962-9266 29F Junyao International Plaza, No.789, Transparency Zhao Jia Bang Road, Shanghai 200032, China Shin-Etsu Silicone Taiwan Co., Ltd. Phone : +86-(0)21-6443-5550 Fax : +86-(0)21-6443-5868 Hung Kuo Bldg.
    [Show full text]
  • Janome 3160QDC Manual
    INSTRUCTION BOOK IMPORTANT SAFETY INSTRUCTIONS This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance. When using an electrical appliance, basic safety precautions should always be followed, including the following: This sewing machine is designed and manufactured for household use only. Read all instructions before using this sewing machine. DANGER— To reduce the risk of electric shock: An appliance should never be left unattended when plugged in. Always unplug this sewing machine from the electric outlet immediately after using and before cleaning. WARNING— To reduce the risk of burns, fire, electric shock, or injury to persons: 1. Do not allow to be used as a toy. Close attention is necessary when this sewing machine is used by or near children. 2. Use this appliance only for its intended use as described in this owner’s manual. Use only attachments recommended by the manufacturer as contained in this owner’s manual. 3. Never operate this sewing machine if it has a damaged cord or plug, if it is not working properly, if it has been dropped or damaged, or dropped into water. Return this sewing machine to the nearest authorized dealer or service center for examination, repair, electrical or mechanical adjustment. 4. Never operate the appliance with any air opening blocked. Keep ventilation openings of this sewing machine and foot controller free from accumulation of lint, dust and loose cloth.
    [Show full text]
  • SEIKO Will Launch BLW Series, New Flat Bed Sewing Machine
    №E20201110 NewsNews ReleaseRelease October 10, 2020 Seiko Sewing Machine Co., Ltd. SEIKO will launch BLW series, new Flat Bed Sewing Machine. High speed, Compound feed and walking foot, Lockstitch sewing machine with or without built-in Direct Drive Motor. Higher sewing performance of heavy duty materials than conventional products. BLW-8BLCE-DM SEIKO will launch BLW series High speed, Compound feed and Walking foot, Lockstitch, Flat Bed Sewing Machine, as a high-end model of BEW series. Two types are available, one with built-in Direct Drive Motor and one without. Built-in Direct Drive Motor type can make set-up works easier and quicker. To improve sewing performance for specially heavier materials, Presser foot larger lifting amount (20mm), larger Hook (2.8 times larger), higher sewing speed (3,600 s.p.m.) and wider working space (350mm x 130mm) are adopted, in addition to standard functions of automatic Thread trimmer, automatic Back-tack sewing, automatic Presser foot lifting, Climbing device and Dual stitching. The LCD operation touch-panel and the 6 button operation panel and the back-tack switch are placed at front of machine for easier operation and more efficient works. BLW series with those new and improved performances is suitable for manufacturers of Car seat, Furniture, Bag, Canvas and Leather products. *1-needle models as stated below are launched, but also 2-needle models will come soon. Variety BLW-8BLCE-DM Single needle, Direct drive motor, E type presser foot (*) BLW-8BLCS-DM Single needle, Direct drive motor, S type presser foot (*) BLW-8BLCE Single needle, E type presser foot (*) BLW-8BLCS Single needle, S type presser foot (*) (*)Two types of Presser foot, E-type European style and S-type American style, are available.
    [Show full text]
  • Unifirst Solutions for Manufacturing Industry
    The choice for manufacturing work apparel programs Creating and maintaining a cohesive, branded uniform program for a diverse staff can be challenging, particularly in the manufacturing industry where a variety of garments and styles are often required to serve the distinct needs of multiple departments. That’s where UniFirst comes in. A well-designed and managed work apparel program from UniFirst not only delivers the professional employee image you want, it can also help keep your personnel safe and in regulatory compliance. Whether it’s traditional industrial clothing, Flame Resistant (FR) safety garments, or image-enhancing business essentials like oxfords or polo shirts, UniFirst’s managed uniform rental programs offer the right workwear options for employees in all areas of your business. And our large selection and variety of fabric choices will match your brand and performance needs. In addition, a managed UniFirst facility services program can help keep your workplace clean and safe, and create a healthier, more attractive work environment. 2 UniFirst.com // UniFirst.ca Cost-effective solutions for all of your workwear needs UniFirst managed apparel rental programs combine expert hygienic laundering with specialized uniform services to help maintain garment functionality and enhance your professional business image. With a value-based, professionally managed UniFirst rental program, weekly pickup and delivery means employees don’t have to worry about the cleaning and maintenance of their uniforms. Plus, our professional mending and repair services, along with garment replacements as needed, help assure that clean, maintained uniforms are always available when you need them. You have a lot of responsibilities, so don’t let staff uniforms add to your stress.
    [Show full text]
  • Owner's Manual (Pdf)
    i6 0 Installation and operation instructions Englis h Date: 06-2012 Document number: 81342-1-EN © 2012 Raymarine UK Limited i60 Trademark and patents notice Autohelm, hsb2, RayTech Navigator, Sail Pilot, SeaTalk, SeaTalkNG, SeaTalkHS and Sportpilot are registered trademarks of Raymarine UK Limited. RayTalk, Seahawk, Smartpilot, Pathfinder and Raymarine are registered trademarks of Raymarine Holdings Limited. FLIR is a registered trademark of FLIR Systems, Inc. and/or its subsidiaries. All other trademarks, trade names, or company names referenced herein are used for identification only and are the property of their respective owners. This product is protected by patents, design patents, patents pending, or design patents pending. Fair Use Statement You may print no more than three copies of this manual for your own use. You may not make any further copies or distribute or use the manual in any other way including without limitation exploiting the manual commercially or giving or selling copies to third parties. Software updates Check the website www.raymarine.com for the latest software releases for your product. Product handbooks The latest versions of all English and translated handbooks are available to download in PDF format from the website www.raymarine.com. Please check the website to ensure you have the latest handbooks. Copyright ©2012 Raymarine UK Ltd. All rights reserved. ENGLISH Document number: 81342-1 Date: 06-2012 Contents Chapter 1 Important information............................. 7 9.6 Cleaning the display screen ......................................
    [Show full text]
  • Tailor Tack Foot #7
    Tailor Tack Foot #7 Foundation: Cut-away stabilizer Background: Felt Techniques: Fagoting and Bundling Embellishments: Stamped card embellished with hand-made paper and fibers (See below for more directions.) Cutting & Preparation Originally designed to Cut one 8” square of felt and one 8” square of cut-away eliminate the tedious stabilizer. Use temporary spray adhesive to bond the job of marking garment stabilizer to the felt. pieces with hand tailor tacks, this foot also Cut 2 pieces of medium weight fabric, 3” x 6” each offers decorative options Cut one piece of colored cardstock to be 5½” x 8½”. for joining two pieces of fabric and for making Cut a piece of handmade paper 6” x 6”. This piece fringe. will be trimmed to fit the card during construction The needle opening will accommodate a stitch width Collect the following items: up to 5.5mm. Intended to be used with a zigzag Four decorative brads to secure the sewn stitch at least 3mm wide, this foot will not work with swatch to the inside of the card a straight Four adhesive mounting corners to mount the stitch setting; printed photo of Foot #7 on inside of card the needle A sticker or marker to apply/write the numeral 7 will hit the to the front of the card. ridge and One sheet of 8½” x 11” photo paper bend or Gluestick break. Yarn and/or fibers of your choice to make the “tie” on the card front Hole punch (¼” or ⅛”) Rubber stamp of faux writing or other desired design Black ink pad Creating the Card Fagoting Swatch Fold the cardstock in half to be 5½” x 4¼”.
    [Show full text]