Technical Standards and Safety Authority ACTIVE Code Adoption
Total Page:16
File Type:pdf, Size:1020Kb
ACTIVE Code Adoption Documents, Guidelines, Advisories, Director's Orders & Director's Safety Orders as of May 5, 2020 Elevating and Amusement Devices Safety Program Technical Standards and Safety Authority This file contains documents (or regulatory instruments) that form part of Ontario's Elevating Devices Regulatory Landscape. The documents enclosed are those which are considered to be in Active status as of the date of this publishing. For historic and archived versions please refer to the ARCHIVED Regulatory Documents Binder (ED-SKI). Technical Standards & Safety ACTIVE Code Adoption Documents, Guidelines, Advisories, Director's (Safety) Orders Authority This file contains current Active regulatory communucation tools Compliance Yrs Yrs ID No. Date Active Is Past Due? Enforcement Purpose that form part of Ontario's Elevating Devices Regulatory Landscape Due Date Past Due Old Compliance Yrs Past Yrs Old @ ID No. Date CODE ADOPTION DOCUMENT Status1 Status2 Enforcement Purpose By Due 2020-05-05 277-19 Feb-01-19 ED CAD Amendment - Updated to Parts 1,2,4,5,8, Re-Issue Parts 3,6,7 Active Mandatory Regulatory 0.00 1.30 272-18 amendment Mar-30-20 SLM Continuing Education Requirements Active Mandatory Education Requirement 2020-09-26 -0.35 0.14 272-18 May-16-18 SLM Continuing Education Requirements Active see temporary amendment Mandatory Education Requirement 2019-01-01 1.38 2.01 268-14 Dec-05-14 Requirements for Transport Platforms Active Mandatory Regulatory 2017-12-05 2.46 5.46 265-14 Jan-07-14 Construction Hoist Interlocks Active Mandatory Regulatory 2014-01-07 6.37 6.37 194-08 Oct-08-08 Regulation of Parking Garage Lifts Active Mandatory Regulatory 2009-01-01 11.39 11.62 Compliance Yrs Past Yrs Old @ ID No. Date GUIDELINES Status1 Status2 Enforcement Purpose By Due 2020-05-05 257-12 Sep-14-12 Guideline - Construction Hoist Operator Logs Active Mandatory Regulatory 0.00 7.68 256-12 Sep-14-12 Guideline - Construction Hoist Maintenance Logs Active Mandatory Regulatory 0.00 7.68 252-12-r2 Sep-02-19 Simplified Procedure to Correct / Revise a Registered Design Submission Active Mandatory Regulatory 0.00 0.72 251-11-r2 Sep-15-13 Alterations Guideline for CAD 261/13-r1 Active Mandatory Regulatory 0.00 6.68 230-08 Jan-06-10 Incident Reporting Guidelines Active Mandatory Regulatory 0.00 10.38 230-08 (Form) Jan-06-10 Incident Reporting Form Active Mandatory Regulatory 0.00 10.38 224-07-r1 Nov-30-12 Aging Ski Lift - Subsequent Engineering Assessments Active Mandatory Regulatory 0.00 7.47 214-07-r1 Jul-05-12 Incident Reporting Requirements for Z98 Passenger Ropeway Devices Active Mandatory Regulatory 0.00 7.88 214-07-r1 (Form) Jul-05-12 Incident Reporting Requirements for Z98 Passenger Ropeway Devices Active Mandatory Regulatory 0.00 7.88 Compliance Yrs Past Yrs Old @ ID No. Date ADVISORY - Enforcement Policy Status1 Status2 Enforcement Purpose By Due 2020-05-05 284-20 Feb-14-20 Examination of a Construction Hoist (Elevating Device) Form Active Mandatory Enforcement Policy 0.00 0.26 284-20 (Form) Feb-14-20 Examination of a Construction Hoist (Elevating Device) Form Active Mandatory Enforcement Policy 0.00 0.26 279-19 May-15-19 Construction Hoist & Transport Platform Brake Testing Frequency Active Mandatory Enforcement Policy 0.00 1.02 276-18 Sep-12-18 CAT1 - Testing of Emergency Power Active Mandatory Code Requirement 0.00 1.69 274-18 Sep-12-18 Deep Pit Access Active Mandatory Enforcement Policy 0.00 1.69 273-18 Sep-12-18 Brake Marking Plates on Elevator Driving Machine Active Mandatory Enforcement Policy 0.00 1.69 270-17 Dec-04-17 Construction Hoists in the Tunneling Sector Active Mandatory Enforcement Policy 0.00 2.46 264-13 Aug-22-13 Advisory - NTSD & NSM Active Compliance Past Due Mandatory Code Requirement 2014-03-01 6.22 6.75 Compliance Yrs Past Yrs Old @ ID No. Date ADVISORY Status1 Status2 Enforcement Purpose By Due 2020-05-05 285-20 Apr-23-20 COVID-19 Elevator Shutdown Active Non Mandatory Regulatory process 0.00 0.07 283-19 Dec-09-19 Installation Code Edition Active Non Mandatory Info 0.00 0.45 282-19 Dec-03-19 R&O Mufflers Active Non Mandatory Safety Info 0.00 0.46 281-19 Sep-05-19 Turnbull Spring Hitch Active Non Mandatory Safety Info 0.00 0.71 280-19 Aug-30-19 Freight Elevator Fatality Active Non Mandatory Safety Info 0.00 0.72 278-19 May-15-19 Otis Brake Lever fo 130, 131, 139, 159 series Gearless Machines Active Non Mandatory Safety Info 0.00 1.02 Yrs Past Yrs Old @ ID No. Date SAFETY ORDER Status1 Status2 Enforcement Purpose Compliance By Due 2020-05-05 271-18 Sep-17-18 B355 VPL'sLifts w/ Magnetic Reed Switches in Leveling and/or Anti-creep Circuits Active Mandatory Safety issue 2020-09-15 -0.32 1.67 269-17 Jul-14-17 Requirement for Passenger Elevators with Single Speed Control Active Compliance Past Due Mandatory Safety issue 2017-07-14 2.85 2.85 266-14 Jun-01-14 Galaxy Wiring Methods Active Compliance Past Due Mandatory Safety issue 2014-08-31 5.72 5.97 ACTIVE Code Adoption Documents, Guidelines, Advisories, Director's (Safety) Orders as of 2020-05-20 1 of 1 Elevating and Amusement Devices Ref. No.: Safety Division 277-19 Date: Elevating Devices Code Adoption Document Amendment May 3, 2019 IN THE MATTER OF: Technical Standards and Safety Act 2000, S.O. 2000, c. 16, Ontario Regulation 223/01 (Codes and Standards Adopted by Reference), and Ontario Regulation 209/01 (Elevating Devices) The Director for the purposes of Ontario Regulation 209/01 (Elevating Devices), pursuant to section 4 of Ontario Regulation 223/01 (Codes and Standards Adopted by Reference), hereby provides notice that the ELEVATING DEVICES CODE ADOPTION DOCUMENT published by the Technical Standards and Safety Authority and dated June 1, 2001, as amended, is further amended as follows: All sections of the Elevating Devices Code Adoption Document dated June 1, 2001 are hereby replaced with the following, and all previous amendments thereto are thereby superseded: 1. The attached Elevating Devices Code Adoption Document - Amendment 277-19, dated May 3, 2019, is hereby adopted, effective as follows: a. Parts 3, 6, and 7 (which are unchanged from the previous CAD amendment*) are effective immediately. b. Parts 1, 2, 4 and 8 are effective immediately. c. Part 5 is effective July 31, 2019. Any person involved in an activity, process or procedure to which this document applies shall comply with this document. ______________________________________________ Roger Neate Director, O. Reg. 209/01 (Elevating Devices) Distribution: Posted to TSSA website. *Note: Part 3 contains updated references to the Ontario Building Code. Errata: correct 209/01 references on this page. Elevating and Amusement Devices Safety Division, Technical Standards and Safety Authority 345 Carlingview Drive, Toronto, ON M9W 6N9 Tel:(416) 734-3300 CAD Amendment 277-19 CAD Amendment 277-19 ELEVATING DEVICES CODE ADOPTION DOCUMENT AMENDMENT 277-19 May 3, 2019 Elevating and Amusement Devices Safety Program Technical Standards and Safety Authority CAD Amendment 277-19 CAD Amendment 277-19 Background This document and the codes it adopts establish requirements and minimum standards for the design, construction, installation, erection, maintenance and alteration of elevating devices. Pursuant to s. 4(1) of O. Reg. 223/01 (Codes and Standards Adopted by Reference) made under the Technical Standards and Safety Act, 2000, the “Elevating Devices Code Adoption Document” published by TSSA and dated June 1, 2001 (the “CAD”) forms a part of O. Reg. 209/01 (Elevating Devices). The CAD, in turn, adopts various codes. Since its adoption as part of O. Reg. 209/01, the CAD has been amended several times to adopt different versions of codes and to make modifications to those codes. CAD amendment 261-13r1 replaced all previous CAD amendments. CAD amendment 277-19 now replaces CAD amendment 261-13r1. For the user’s convenience, this CAD amendment indicates previous amendments using the colour coding and reference symbols in the following table: Colour Coding and Reference Symbols Used in CAD Amendment 277-19 7.5 is a reference to another section in this CAD amendment (197/06) is a reference to a predecessor document (Director’s Order, Enforcement Procedure, etc.) 7.2.4. is a reference to a section in an external document or code as part of is a reference to text from a published code that is not part of this code but is shown for reference only Red Text is used to identify changes from the previous CAD Amendment or TSSA-specific additions to a published code is used to denote a TSSA-specific alteration Blue greyed denotes a maintenance permission that will expire on March 31, 2014 Peach highlight -identifies new code amending text that: - was originally contained in CAD Amendment-261-13r1 or - is contained in CAD Amendment 277 Peach highlight -identifies text from the A17.1/B44-2013 code introduced in amendment 261-13-r1 Note that definitions contained in O. Reg. 209/01 apply to the CAD and adopted codes. For more information contact: Technical Standards and Safety Authority Elevating and Amusement Devices Safety Program 345 Carlingview Drive Toronto ON M9W 6N9 Tel: 416.734.3300 Fax: 416.231.5435 e-mail: [email protected] Copyright Permission Part 3 of this Code Adoption Document contains, materials reprinted from ASME A17.1-2010/CSA B44-10, and from proposed revisions to ASME A17.1-2013, by permission of The American Society of Mechanical Engineers. All rights reserved. i CAD Amendment 277-19 ii CAD Amendment 277-19 Table of Contents Part 1 ....................................................................................................................................................................