Boats and Harbors Publication 9-06
“The” Marine Marketplace ® -and-ha ats rbo bo rs. Now Online!! c w. o w m
w
Visit our website at www.boats-and-harbors.com $3.00 Published (3) Times Each Month SECOND AUGUST ISSUE 2016 • VOLUME 59 NO. 9 See the “Yellow Sheet” Today For All Your CROSSVILLE, TENNESSEE 38557 PH: (931) 484-6100 • FAX: (931) 456-2337 Email: [email protected] Commercial Marine Needs!!
Marine, Oilfield & Construction
bid
ONLINE AUCTIONEERS ASSN., INC. BIDDING LAA AVAILABLEVA ABLEAILV Houma, La • September 29th
Scan for Auction Details! Consign Now...NoNowww...... Call: 800-850-2252
VirtualVirtual Auction at the Houma Civic Center in Houma, LA a photographer will be sent onsite to photograph/video lots after a signed contract is in place. Call Sabrina/Jessica at 225-686-2252 to discuss auction terms or email [email protected] Buyeruyer’s’B s Premium 10% on the 1st $50,000, Auctioneer: M. Henderson La Lic# 136-16 then 2% on the remaining balance
Contents of this publication either in whole or in part may not be reproduced without the express permission of the publisher. Is that Boats and Harbors in your Copyright © 2016 Donnelly Advertising & Publishing. hand sir? Please anything for a perusal of the Yellow Sheet! I’ ve been adrift BOATS & HARBORS Is Published 3 Times Each Month and Each Issue Goes by Direct Mail and Internet to Thousands of Individual Boat Owners, Builders and Operators, Tug, Pushboat and Barge Owners and Builders, Boat Yards, Commercial Fishermen, Packers and Processors. Divers and Diving Companies, for 3 months! Docks, Dredgers, Exporters, Ferrymen, Freighters, Harbor Personnel, Longshoremen, Marinas, Steamship Companies, Marine Contractors, Off-Shore and Inland Oil Exploration Firms, Pile Drivers, Marine Salvage Firms, Ship Yards, Terminals, Towing Companies, Marine Warehouses, Government Agencies & other Related Businesses in the U. S. Possessions, Canada, Mexico & most other Foreign Countries. Boats and Harbors Is Published in Crossville TN 38557.
JGD
BOATS & HARBORS ® P. O. Drawer 647 • Crossville, Tennessee 38557-0647 • USA
Vigor delivers ATB Tug, Dale R Lindsey, to Harley Marine Services SEATTLE, WASH. – (July 6, 2015) – Vigor’s Seattle shipyard recently delivered the Dale R Lindsey, a 95’ x 38’ x 16’, 3,000 hp ATB Twin Screw Tug to Harley Marine Services Inc. This is the eleventh vessel built by Vigor for its long-time cus- tomer, Harley Marine. Two 83,000 bbl., double-hull ATB tank barges, Fight ALS and Fight Fanconi Anemia, were recently completed at the Portland, Ore. shipyard. “Repeat business is one of the best compliments a builder can receive,” said Keith Whittemore, Vigor Executive VP of Business Development. “Even better is when the confidence of our customers extends into new areas. Vigor has worked hard to expand its capabilities and has steadily grown from a barge builder to a construction portfolio that includes ferries in Seattle, Alaska and San Francisco, fishing vessels, fireboats, tugs, high performance crafts and now an ATB tug.” Designed by Elliot Bay Design Group for primary operation in Alaska, the ATB tug utilizes an Articouple FRM-43M coupler system to pair with the 20,000 barrel oil barge, Petro Mariner. It features a raised aluminum pilothouse for optimal visibility built by Kvichak. For more info contact: Athena Maris, (503) 957-1565. PAGE 2 - SECOND AUGUST ISSUE 2016 See Us on the WEB at www.boats-and-harbors.com BOATS & HARBORS WANT VALUE FOR YOUR ADVERTISING DOLLAR? WATER COOLED EXHAUST MANIFOLDS For 3-71 , 4-71, & 6-71 Detroit Diesel
DD-1-6710 3-71 & 6V71...... $225.00 4-71 & 8V71...... $250.00 6-71 & 12V71...... $325.00 21’ LANDING CRAFT - IN STOCK WORK BOAT 20’, 24’ - IN STOCK 4” NPT EXHAUST END PLATE...... $40.00 Water Cover Plate (Specify Pipe Size)...... $9.00 BARR MARINE BY EDM 100 Douglas Way, P.O. Box 190 Natural Bridge Station, VA 24579 Toll Free (866) 255-9265 Fax (540) 291-4185
C.C.R. LLC DECK BARGE 24’ HYDRAULIC CRANE 24’ WORK BARGE - IN STOCK
LANDING CRAFT 30’ - IN STOCK PILOTHOUSE 40’ Quarter Barge Rentals ~ Stock Workboats Available ~ • Sleeps 56 Men • Fully Self Contained • Galley Seats 40 • 150 Generator Sets • Central Air and Heat Workboats and Landing Craft in Stock Contact: Richard Gremillion or C.J. Tabor Office: (985) 693-7891 Office/Cell: LIFETYME BOATS, INC. Cell: (985) 691-2200 (504) 416-7524 www.airboat-transportation.com 14104 Hwy 84, Jonesville, LA 71343 Phone (318) 339-4007 CLOSING DATES • THIRD AUGUST ISSUE [email protected] (To be mailed August 19th) FOR DISPLAY FOR CLASSIFIED www.lifetymeboats.com August 16th August 18th (9:00 A.M. C.S.T) (1:00 P.M. C.S.T) BOATS & HARBORS Crossville, TN -- (931) 484-6100 Fax: (931) 456-2337 TELL ‘EM YOU SAW IT IN BOATS & HARBORS SECOND AUGUST ISSUE 2016 - PAGE 3 180’ Offshore Supply Vessel US Flag Location: US Gulf Coast Caterpiller Power Marine International, LLC Call: (281) 635-7151 E-mail: [email protected]
100’ LIVE ABOARD ELLICOTT 370HP DIVE BOAT
Ready For Work - New Pump, Gear Box, Service Water Pump Has a 20’ Dredging Depth OIL PADS Newly Painted Priced to Sell - $195,000 Marine and Construction Only $19.95 Per Bale (2) 12V 2000 MTU • (2) 50KW Gen. Cape Mining • (609) 374-2995 - NJ Five Stocking Locations 3200 $375,000.00Gal. Fuel • 1200 Gal. Water Equipment for Sale We Have The Best Prices On Current COI & Dry Dock Tarrytown, NY Oil Absorbents, Booms, Pads CanRecent Be Engine Viewed Survey At: and Socks. 800-9-BUYNET www.ultimategetaway.net www.tappanzeesales.com www.buyingnetwork.com (239) 466-0466
5 MILLION LBS. IN STOCK Nelson Class 44' x 12' Fiberglass Pilot Boat. Built 1985 by HALMATIC Ltd. UK. 23 kt max. New Twin Volvo TAMD71B 270 HP installed in 1997. In 2006, RENT - SELL - LEASE - TRADE both engines removed from boat and complete over- haul performed. To date, engines have approx. 3,000 NEW hours since overhaul. In 2013 a $20,000 rewire Anchors, Chain, Buoys, Yokohamas, project performed. $175,000 • (910) 520-8505 USED Sea Cushions, Wire Rope and Fittings, 230’ SIDE WHEELER Deck and Dock Hardware, Oil Boom, A.B.S. Towing and Salvage Equipment Anchor Marine Price & Industrial Supply, Inc. 1-800-233-8014 (713) 644-1183 Just Reduced!! P.O. Box 58645 Fax: (713) 644-1185 Houston, TX 77258 24 Hour Service WEBSITE: www.anchormarinehouston.com email: [email protected] JJ && BB BOATBOAT RENTALRENTAL LLCLLC Has CrewJ Boats, & Work B Boats,FABRICATION Tug Boats and Living Quarters for Hire.
J & B Fabrication Builds Work Boats and Crew Boats to Your Specifications We also have Coast Guard Plans to choose from, tell us what you want and we can build it M/V SPECULATION Below are a few vessels built by J & B Fabrication. You can contact us @ (985) 594-5831 or This 230’ x 72’ - Four Deck Side Wheeler, Visit our website: www.jbboatrentals.com Could Be Suited For: Up To 1,500 Passengers. Casino Boat, Exhibition Or Convention Center Vessel, River Cruise Ship Shore-Side Entertainment - Complex Restaurants/Bar Documented And Registered With The USCG
VESSELS FOR SALE 150’ Aluminum Welded Crew Boat
KIT DENISON
[email protected] Cell: (954) 614-2888 150’ Aluminum Crew Boat with 5 Cummins K19, Very Clean, New COI Tel: (954) 763-3971 65’ Aluminum Crew with Cummins Diesel Engines, Clean & Fast, New COI (4) 50 Aluminum Crew Boats with Cummins Diesel Engines, Clean & Fast, All New COI Downtown Yachting Center, 68’ 3 Level Steel Push Boat, with Cummins Diesel Engines, New COI 401 S.W. 1st Avenue, (10) Aluminum Deck Boats from 20’ - 47’ Ft. Lauderdale, FL 33301 See Us on the WEB at www.boats-and-harbors.com BOATS & HARBORS PAGE 4 - SECOND AUGUST ISSUE 2016 WANT VALUE FOR YOUR ADVERTISING DOLLAR?
Quality Custom Built Aluminum Workboats & Pleasure Craft Located In Harvey, Louisiana Just South Of New Orleans. THE STRONGEST HATCH TO EVER HIT THE DECK!
27’ Harbor Patrol Vessel 75’ Quick Response Fire FIghting Vessel
ROUNDS OVALS 35’ Collar Style Supply Vessel 38’ In Shore Supply Vessel
30’ Aluminum Supply Vessel 30’ Collar Style Supply Vessel MULTI-BOLT Aluminum Never Looked So Good! MANHOLES SQUARES We Also Offer A Variety Of Services Including: - Repairs Hatches Available in Cast Aluminum & Cast Steel - Conversions - Sandblasting & Painting - Aluminum & Steel Fabrication TO ORDER - Dockside Service Including A 65 Ton Crane - Experience With State & Local Government Let Us Build A Boat For You! Contact Darren or Chad at (504) 347-7898 Seattle, WA • Costa Mesa, CA Visit us on the web at WWW.ALUMAMARINE.COM. For further info, contact us by email at [email protected] or [email protected] www.baiermarine.com
www.YachtSalvage.com
40’ Tiara 1998 56’ Chantier Naval (Dealer Liquidation) 1994 • (Brokerage) YS150049 YS150016
41’ Formula 1995 (Dealer Liquidation) 26’ Sea Ray 2012 YS150162 (Brokerage) YS160138
42’ Baja 1996 (Dealer Liquidation) YS150161 46’ Hylas 2001 (Repossession) YS150086 Hundreds Of Boats For Sale
For More Information Please Call One Of Our Offices Warwick, RI (401) 732-6300 • Charleston, SC (843) 789-0357 Mendon, MA (508) 478-0200 • St. George, SC (843) 563-9199 BOATS & HARBORS SECOND AUGUST ISSUE 2016 - PAGE 5 Crossville, TN -- (931) 484-6100 Fax: (931) 456-2337 TELL ‘EM YOU SAW IT IN BOATS & HARBORS The most advanced. • RATED “BEST” BY POWERBOAT REPORTS • REPLACES STUFFING BOX The most reliable. • DRIPLESS • ELIMINATES SHAFT WEAR • PROTECTS ENVIRONMENT • ELIMINATES POLLUTION FINES MIDSHIP MARINE • UTILIzED BY THE U.S. COAST GUARD OUR QUALITY SAYS IT ALL! WHEN IT COMES TO BUILDING ALUMINUM BOATS WE HAVE NO LIMITATIONS
• Passenger Vessels • Crew Boats • Pilot Boats • Patrol Boats • Dive Boats • Water Taxis • Fishing Boats
• MAINTENANCE FREE • 3 YEAR WARRANTY • SINCE 1975 • METRIC AND CUSTOM SIzES AVAILABLE • FROM 3/4” TO 8” SHAFT SIzES 1-800-940-SEAL • MADE IN USA • 3 MODELS TO CHOOSE FROM • COMPLETE LINE OF RUDDER SEALS 3615Phone: Dove St., Port Huron,Fax: Michigan 48060 USA • PRICES STARTING AT $95 810.388-9718 • 810.388-9753 210’ x 32’ HIGH SPEED CREWBOAT Visit Us Online At: lasdrop.com
65’ SAILING CAT - 120 PASS
95’ OIL SPILL FRV
42’ CREWBOAT 97’ EXCURSION VESSEL
70’ x 21’ PASSENGER FERRY
90’ CATAMARANS - 250 PASS
55’ PASSENGER HEADBOAT - 49 PASS 55’ SEMI SUB - 49 PASS 58’ ALUMINUM VESSEL MIDSHIP MARINE ALSO SPECIALIZES IN CONVERSIONS OF CREW BOATS INTO: DIVE VESSELS, CHARTER YACHTS, PASSENGER FERRIES, ETC. W/LOW PRICING & HIGH QUALITY. LET US DESIGN & QUOTE YOUR NEXT VESSEL. MIDSHIP MARINE will quote on building any vessel to meet your specific needs. All work is done at our yard in Harvey. CONTACT MIKE or RANDY - PHONE (504) 341-4359 • FAX (504)-340-8997 Email: [email protected] • Website: www.MidshipMarine.net MAILING ADDRESS: P.O. BOX 125, HARVEY, LOUISIANA 70059
MARINE EQUIPMENT FOR SALE WE ARE A FULL SERVICE BUILDING AND REPAIR COMPANY Storage / Dockage Rates Available Why Choose Us: • QualityWorkmanship • Over 30 Years Experience • U.S. Ship Builder • Certified ABS, USCG • Accessible to East Coast • Close to Jacksonville International Airport TRUCKABLE TUG SALE / LEASE
137’ x 34.6’ x 20.5' • Steel Hull, Model Bow Tug Horsepower: 6,000 • ABS: Classed A1, AMS • Tow Line: 2300’ of 2.25” Main Engines: (2) – 16-645-E5 Tier OT • Tow Winch: Smatco 72 DD WF 190’ LOA Landing Craft - Rated 1500 HP, Asking Price: $600,000 6400 Sq. Ft. Open Deck, Accom. 9 Crew, Shallow Draft. Under Construction, Requires 25’ 10” x 13’ 6”, 2 Cummins 6.7L 305 HP Ea., Outfitting.$1.95 Million USD 2 Twin Disc Gears 3:1 Ratio, 8’ Push Knee, 400 Gal. Fuel Capacity, up to 17’ Height of DECK BARGE • SALE / LEASE Eye, Electronics, Deck Winch Cables, 34” x 19” Props.$298,000 SALE / LEASE USD 200’ Double Skin Load Line Barge 11,000 bbl, $340,000 98’ x 29.5’ x 11.7' Steel Hull, Model Bow Tug 130’ x 60’ x 8’, 7,800 (sqft) Deck, 2,400 psf 105’ x 23.5’ • Aluminum Crew Boat Horsepower: 4,000 • Tow Line: 2000’ of 2” Uniform Dry Load. Passengers: 51, Main Engines: Main Engines: (2) – 12-645-C E6 Tier OT $1.15 Million USD (3) – GM 12V71. In Great Condition. Tow Winch: Smatco L16/34 DAW 100 Asking Price: $300,000 Asking Price: $250,000 ST. JOHNS MODEL BOW TUG BOAT
70’ x 40’ x 6.5’ • Steel Spud Barge 105’ x 21’ x 6’ • Aluminum Crew Boat (4) Spud Wells Main Engines: None • Gears: (3) Call For Details Raked Bow • Boxed Stern Generators: (2) • Project Boat Drydocking Louisiana USA • Asking Price: $102,000 Asking Price: $60,000 We service local and international customers! LEE FELTERMAN AND ASSOCIATES, LLC For info. on sales, new builds or repairs please call 386-972-3413 560 Stokes Landing Road, Palatka FL 32177 Ph: (985) 397-2848 • Website: www.leefelterman.com www.stjohnsshipbuilding.com See Us on the WEB at www.boats-and-harbors.com BOATS & HARBORS PAGE 6 - SECOND AUGUST ISSUE 2016 WANT VALUE FOR YOUR ADVERTISING DOLLAR?
OUR SERVICE IS YOUR POWERFUL SOLUTION • In-house & on-site repairrepair • Equipment assembly & disassembly MAF-CAB control upgradeupgrade • PreventativePreventative maintenance • Custom cab redesignredesign • EnvironmentalEnvironmental & controlcontrol upgrades • Fabrication shop • REBEX® - Rebuilt Exchange ProgramProgram • WireWire roperope installation • Blast & paint shop • Boom repairrepair & installation
American 550 repair
Manitowoc 390 control upgradeupgrade ClydeClyde AD 175 complete disassemble and rebuild
Toll-FreeTToll-Froll-Free 1.866.883.7221 | WWorld-Wideorld-Wide 1.513.367.2151 [email protected] | www.fmmafco.comwww.fmmafco.com
FMM90 BOATS & HARBORS Crossville, TN -- (931) 484-6100 Fax: (931) 456-2337 TELL ‘EM YOU SAW IT IN BOATS & HARBORS SECOND AUGUST ISSUE 2016 - PAGE 7 See Us on the WEB at www.boats-and-harbors.com BOATS & HARBORS PAGE 8 - SECOND AUGUST ISSUE 2016 WANTVALUEFORYOURADVERTISINGDOLLAR? SCRATCH & DENT SALE WWW.PACIFICBOATBROKERS.COM High 100% Tensile U.S. BUYING OR SELLING? Galvaluma Made Steel No WHAT ARE YOU DOING Drilling Our website is viewed Required WITH YOUR VESSEL? Military Spec. Quonsets by thousands daily. $AVE $$$$ Buying? We have hundreds List your vessel of vessels to choose from. 20 x 30 40 x 60 55 x 120 New 140’ x 40’ x 10’ with us today.... 25 x 40 45 x 72 60 x 150 Spud Keyway Barge for free Archway30 x 50 Steel51 x 96 Buildings70 x 200 THIS MONTH’S FEATURE Hydraulic Spuds 35’. RELIEF - 101'4.8" X 26'9.6" X 12'3.6" 1-800-344-2724 John Deere Spud Engine. Price Negotiable. Call Steve (985) 860-0258 Fax (412) 771-4191 1954 National Steel Built Cooper-Bessemer 6 Cyl. 1,200 HP Diesel PARTY BOAT 110’ x 29’ 45 TON NORTHWEST 50D Cruising Speed/Full Speed: 10 Knots/12 Knots ALUMINUM • $1,150,000 CRAWLER CRANE / DRAGLINE / CLAM Fuel Tanks: 7, Steel, 12,000 Gallons Each Est. Capacity VHF: 3 • Radar: Furuno • Sounder: Color Stock #WS4584 • Reduced To $135,000 USD
U.S. Office: 360-332-9526 • Head Office: 877-448-0010 Email: [email protected]
All Aluminum Derektor Built. (2) Deutz TBD BARGES FOR RENT 616 – 818hp ea., (2) John Deere 6135SFM85 – 650hp ea. Top Speed 20.5 Knots. 40Kw Gen & 55Kw Northern Lights. Full electronics, USCG Inspected. Presently fishing Brielle, NJ Lic 150Day: Passengers (732) 100 239-9874 miles. GM6V71 Diesel, Env. Cab, Air Controls, Power Load REDUCED $100,000 Lowering, Tracks 15’4” L x 13’2” W w/30” Pads, 100’ Angle Boom, Hook Block, Rear Folding Gantry, SUSQUEHANNA SANTEE 2001 External Removable Counterweight - 18,000#, Full RevolvingPrice: Fairlead,Located Machine In West Weight Palm - Beach,91,140#. FL 50' x 20', Twin 1/4" Alum. Trapezoid Hulls, 130 $28,500.00 Honda’s, A/C. 2 Heads, 2 Gens., 10' Bar w/3 Beer Sectional Barges • Located In Florida Taps, COI 70, Dinner-Tour-Cruise. Loc. Maryland. Harold Howell Const. Equip. Co. $89,000 40 x 10 x 5 & 60 x 11 x 4 Ph: (561) 744-5091 • Fax (561) 743-0915 NOW Contact: (305) 965-8852 www.haroldhowell.com • [email protected] (267) 784-7771 Email: [email protected]
33’ Searocket Current COI 14 pax, good until 2021. Twin 6 cyl Yanmar 60’ PUSHBOAT / TWO HOPPER BARGE Turbos. 3 axle trailer. Motivated Seller Survey Value $114,000 COMBINATION FOR SALE
(361) 229-0032 • [email protected] Towboat / barge combination with 275' x 54' x 12' Lead Hopper Barge and 260' x 54' second box hopper START PLANNING NOW barge. Overall unit is 595' in length. Air operated retractable wheelhouse. Minimum height 17'. Max height of eye 30'. Capable of transporting approx. 8,000T of aggregate or 345TEU at speeds up to 14mph. Lead barge fitted with 540HP 4-channel bow thruster. Dry docked: 30 April 2010; props changed out to stainless steel. Was working regularly, now tied up and run on a regular basis. Inviting best offers in the $1.5M range
65' Lydia Complete Repower 2014
Twin John Deere 6135 Engines Still Under Warranty & Twin Disc gears. Available Fall 2016 $415k, Call Dave 732-996-2579 or email for comp. description. [email protected] Marine Travelift - 15 AMO (30,000 Lbs. Capacity)
Pushboat / Barge Combination with 275’ x 54’ x 12’ Lead and 260’ x 54’ Second Barge
Ms. Angel: Built 2005, steel construction, built by Halimar Shipyard. Air Operated retractable wheelhouse with minimum height of 17’, maximum height of eye 30’. 1984, 13’ 8” ICW (Extra Width Available), 18’ ICH, Length: 60 FT. (Reg. Length 57 FT.) Hydraulic Jib Crane, Rebuilt Trunnion Pin, Hydraulic Cylinders, Steering Pins/Bushings, Great Cond., Beam: 54 FT. ReadyKendrick To Work. Available EquipmentImmediately. $29,500 OBO Draft: 9 FT. [email protected] Engines: 2 CAT 3512B / 3000 HP. (866) 744-9921 A WINNING COMBINATION
Lead Barge has spoonbill bow and fitted with pilothouse operated bow thruster. First barge is a box barge made up to the tug.
THE ONLINE DIGITAL EDITION AND PRINT EDITION OF BOATS & HARBORS®
Buy and sell anything connected to the commercial marine industry using our time proven print edition and the power of the internet! To View Our DIGITAL EDITION or Contact Us Online, Go To: Please contact Capt Bob Tice 985-448-0409 or email: www.boats-and-harbors.com [email protected] • www.oceanmarine.com For More Information Call: (931) 484-6100 BOATS & HARBORS SECOND AUGUST ISSUE 2016 - PAGE 9 Crossville, TN -- (931) 484-6100 Fax: (931) 456-2337 TELL ‘EM YOU SAW IT IN BOATS & HARBORS [email protected] OOpdyke p d y k e Inc n c. DESDEEESDSDE MMEXICO:EXICO: 0001-215-721-4446011---222115--7721-4446 Specialized Truck & Equipment Sales 3123 Bethlehem Pike, Hatfield P.A. 19440 866-204-2545 WWW.WWW.tRUCKSRUCKS123123.COM.COM 100+SPECIALIZED TRUCKS IN STOCK!ST OCK! UNMOUNTEDUNMOUNTED KKNUCKLEBOOMSNUCKLEBOOMS
FOR IMMEDIATE SALE OR LEASE New 12 x 14 x 36 – 540hp Booster Skid For more information, contact Jessica: (785) 380-4140 • [email protected]
3 new $14,900-$18,500$14,900-$18,500 +,$%3$/),1*(5())(5)$66,(7&+,$% 3$/),1*(5 ())(5 )$66, (7&
OHNSON IESEL ERVICE 1984 - 38' Monark Crew Boat J D S Dealer for Cummins, Detroit, & Volvo Marine & Industrial Engines, Power Units and 20 KNUCKLEBOOM TRUCKS Twin 671 225 HP ea., Twin Disc 507 2:1 gears 27 x 26 SS wheels, ready to customize Generator sets. New, exchanges and used engines. We carry exchange and new for$55,000.00 your mission. • Call (302) 462-5205 Twin Disc and ZFPhone Marine (228) transmission 392-1311 and all Fax parts (228) necessary 392-0096 for overhaul's. or [email protected] Email: [email protected] • Website: JohnsonDiesel.com 20+ used $3,900$3,,90900 & up 20+ KNUCKLEBOOM TRUCKS Classic Chesapeake Bay $79,500$79,500 86698669 Dead Rise 1(:758&.61(:758&.6 97’ Swiftship 1974 ) 25(;325721/<25(;3257 21/< ESTATE SALE Asking $549,000 Offers Encouraged
(3)(3) 22014014 IINTERNATIONALNTERNATIONAL 7600;7600; ISM; 440440 HP; 11 SP; A/C;A/C; 86K86K GVW.GVW. 10+ FUEL TRUCKS IN STOCK! f%52.(56:$17('ff%52..((56 ::$$17(' f WEWE PAY COMPETITIVCOMPETITIVEE COMMISSIONS ON SALES! BOATS & HARBORS 1978, 54’, Current COI 20 miles 42+2. IS Well kept and cruising daily. T-471 Nats. “THE” MARKET PLACE 4kw Gen. NJ. Moving up. (732) 337-9292 • $53,000 FOR THE MARINE INDUSTRY www.classicboatrides.com
C.G. Certificate for 133 passengers, great for mothership at fishing camp, NEUVILLE BOAT WORKS, INC. whale watching, weddings etc. 3-12V71TI w/4500 hours 525 HP each, BUILDERS OF ALUMINUM BOATS 7 guest staterooms and 3 bunk strm for crew. Ship is in good operating condition. IN BUSINESS SINCE 1969 For Complete Information Contact Tom Allen (206) 849-8785
Schooner Jeanie B 72' GAFF RIGGED TALL SHIP, WASHINGTON, NC
180’ Jet Powered USCG T, ABS Classed A-1 HSC AMS DPS-2
170’ Crew Supply USCG T/L ABS Classed A-1 HSC AMS DPS-1 Slots Currently Available [email protected] Current COI 25 USCG Inspected Overnight / Coastal Cruising 2 Heads • Sleeps 15 Detroit Diesel 671 Complete Rebuild 2015 167’ WATERJET POWERED USCG T/L ABS CLASS A-1 HSC Westerbeke Genset Raymarine Autopilot Radar Includes successful Positive cash flow business Charter ready $275,000.00 47’ CREWBOAT (30 PASS.) 50’ PILOT BOAT Call Captain Paul • (804) 519-0174 http://www.JeanieB.com/ TOP QUALITY CUSTOMIZED BOATS TO MEET YOUR NEEDS Passenger Boats • Pilot Boats • Party Boats Facebook: Schooner Jeanie B Patrol Boats • FSV's Youtube: Schooner Jeanie B PH: (337) 229-6507 CONTACT: KERRY OR ERROL www.neuvilleboatworks.com • New Iberia, LA [email protected] PAGE 10 - SECOND AUGUST ISSUE 2016 See Us on the WEB at www.boats-and-harbors.com BOATS & HARBORS WANTVALUEFORYOURADVERTISINGDOLLAR?
To Order Call: 800-877-8350 BOATS & HARBORS Crossville, TN -- (931) 484-6100 Fax: (931) 456-2337 TELL ‘EM YOU SAW IT IN BOATS & HARBORS SECOND AUGUST ISSUE 2016 - PAGE 11 ISLAND WIDE MARINE INSURANCE Superior Service Since 1977
CUSTOMIZED POLICIES Designed Specifically For: Passenger Vessels Sightseeing - Dinner Cruise Headboats - 6 Packs - Ferry Dolphin - Whale Watch FEATURING: ★ Basic & Enhanced Policies ★ Competitive Pricing ★ Easy Payment Terms ★ Discounts For Seasonal Operations Marine Insurance is Our ONLY Business 1-800-635-6097
“Marine Industry Sales and Charters” DAMCO MARINE MANAGEMENT, INC. Morgan City • New Orleans Phone (985) 384-2614 • Fax (985) 384-3741 Britt Cell: (985) 714-0974 • Don Cell: (985) 397-1941 BOATS BARGES CRANES Crew Boats • Lugger Boats Deck Barges • Hopper Barges American Cranes Tug Boats • Push Boats Living Quarters Barges Lima Cranes • Terex Cranes Supply Boats Spud Barges • Tank Barges Manitowoc Cranes Utility Boats • Lift Boats Crane Barges Linkbelt Cranes NEW CONST. DRYDOCKS MISC. EQUIP. WE ARE LOOKING FOR NEW LISTINGS IF ANYONE IS LOOKING TO SELL. PLEASE CONTACT US ON INFO ABOUT HOW TO LIST WITH US.
OUR INVENTORY IS GROWING DAILY, PRICES ARE STARTING TO DROP, AND IT’S A BUYERS’ MARKET. COME VISIT OUR WEBSITE AND SEE WHAT’S NEW.
DAMCO MARINE MANAGEMENT, INC., with over 30 years in the marine brokerage & con- sulting business, offers quality marine equip., including new & used Boats, Barges, Cranes, & Dry Docks, & many other miscellaneous equip. available under U.S. or foreign flags. We have financing options available, we will arrange for NAMS Surveys and Valuations, we can help you ship, transport domestically or internationally, help with reflaging, redocumenting, transferring ownership, we also have charter and bareboat options. We will facilitate the purchase/sale transaction from start to finish. ••• IF IT FLOATS WE CAN HELP YOU BUY OR SELL IT •••
• Call For Details And Additional Pictures • E-mail: [email protected] • [email protected] • www.DAMCOMARINE.com See Us on the WEB at www.boats-and-harbors.com BOATS & HARBORS PAGE 12 - SECOND AUGUST ISSUE 2016 WANTVALUEFORYOURADVERTISINGDOLLAR? AMERICA’S PREMIER TRUCKABLE BOAT BUILDER IS OFFERING SUPERIOR BOATS AT PRICES LOWER THAN YOU’VE SEEN IN YEARS 25.5’ x 12’, Single Screw Towboat, 50’ x 15’, Twin Screw Towboat, 750 h.p., 225 h.p., Flanking Rudders. 5:1 Gears, 46” Props, 20 K.W. Gen.
25’ x 10’, Single Screw Towboat, 225 h.p., Flanking Rudders. 25.5’ x 14’, Twin Screw Towboat, 450 h.p., with Deckhouse, 3.5’ Draft.
25.5’ x 14’, Twin Screw Towboat, 450 h.p., FULLY EQUIPPED 3.5’ Draft. THIS BOAT AND OTHER MODELS ARE IN STOCK FOR DELIVERY TODAY! PROGRESSIVE INDUSTRIAL, INC. PALMETTO, FL Sectional Barges 8’ x 20’ to 15’ x 60’ per section pin together (941) 723-0201 to form as large a platform as needed. PUSHBOATS-BARGES.COM
Powered By Kubota
Phasor Marine, is one of America’s leading
manufacturers of marine gen-sets from
3.5 KW - 99 KW. By combining a Kubota or John
Deere diesel engine with the finest generators Standard Equipment: 1800 RPM Sets available, you will have the Raw Power, • Kubota or John Deere Diesel Engine Simplicity and Reliability that has made • Single Bearing Generator With Epoxy Coated Stator Windings Phasor Marine the new industry standard for • Ī 1% Solid-State Voltage Regulation • Low 1,800 RPM Operating Speed excellence. Call now for more information on • Four Point Isolation Mounts the complete line of marine gen-sets. • Automatic Low Oil Pressure and High Water K3 - 9.5 KW Temperature Safety Shutdown Systems • Fresh Water Heat Exchanger Cooling BOATS & HARBORS SPECIALS • Water Cooled Manifold and MODEL PRICE MODEL PRICE Stainless Steel Exhaust Elbow • Direct Driven raw Water Pump K2 - 4.5 IPC $ 8,280.00 K4 - 12.5 KW $11,265.00 • RACOR Fuel Filter K3 - 7.0 IPC 8,720.00 K4 - 15.0 KW 11,865.00 • Electric Fuel Transfer Pump K3 - 6.5 KWC 8,190.00 K4 - 17.5 KW 12,925.00 • Toggle Switch Start with Preheat, Start, K3 - 7.0 KW 8,390.00 K4 - 21.0 KW 13,985.00 Run, & Stop Positions K3 - 8.0 KWC 8,895.00 K4 - 24.0 KW 15,625.00 • Awl-Craft 2000 Urethane Finish K3 - 8.5 KW 8,735.00 K4 - 30.0 KW 19,250.00 • Oil Drain Valve • Zinc Anode in Heat Exchanger K3 - 9.5 KW 9,695.00 K4 - 34.0 KW 21,175.00 • Air Intake Silencer K3 - 10.0 KWC 10,170.00 J4 - 65.0 KW 30,825.00 • Spin On Oil Filter K4 - 12.0 KWC 11,385.00 J6 - 100.0 KW 39,225.00 • 5 Year Limited Warranty
2880 Hammondville Road, Pompano Beach, FL 33069 come visit our website Phone: (954) 979-5899 • Fax: (954) 979-4349 900 Industrial Park Rd #10 Deep River CT www.phasormarine.com Phone 860-526-9773 • Fax 860-526-2090 Ad Design By: TFG ADVERTISING • WWW.TFGADVERTISING.COM BOATS & HARBORS SECOND AUGUST ISSUE 2016 - PAGE 13 Crossville, TN -- (931) 484-6100 Fax: (931) 456-2337 TELL ‘EM YOU SAW IT IN BOATS & HARBORS 1983 43' Miller Aluminum Work Boat Price Reduced $110K (OBO) Spud Barge For Sale
GREAT POINT CELEBRATION LADY
1,120 Passenger Ferry 149 Passenger Sternwheeler 550 HP John Deere With 2700 Hours. Currently 160’ x 42’ x 8’ • Good condition. Set Up For Commercial Assistance Towing. (609) 827-7557 $280,000.00 • (225) 776-4714
ZELINSKY ROYAL ARGOSY
400 Passenger High Speed Catamaran 752 Passenger Packet
DOCKSIDE PORTABLE STEAM PLANT BOILER ROOM
5,000 lbs. to 20,000 lbs. per Hour Saturated Steam 175 PSI Max 608/788-3210 • FAX 608/788-3227 600 HP Marine Boiler with Low Nox Burner 750 BHP • Nat. Gas, Propane E-MAIL: [email protected] Self Contained steam plant with all subsystems and Crane Lift Points www.pinnaclemarine.com Designed for Dockside Steam Production 225Less thanTon 6 months Self use sincePropelled new • Located inTransporter San Francisco, CA Call for Details!! JEMISON MARINE 7 YARD CLAMSHELL BUCKET SHIPYARD *UNUSED* New Constructions, Electric Hydraulic Power Pack on Repairs And Conversions Board • Wireless Remote Control Teeth Available OATS OR ALE Mfg: Hawco/Anvil Attachments (NEW) B F S Located 251-824-7878 • 251-824-4575 (Fax) San Francisco, CA 9315 Little River Rd • PO Box 645 Sierra Equipment Co. Inc. Bayou La Batre, Alabama 36509 3501 BreakwaterPhone (510)Court, 887-7500Hayward, CA 94545 Contact: Tim Jemison Sales: [email protected] website: www.jemisonmarine.com
NEW 6-Dog Watertight FLUSH HATCHES ABS Steel Doors PIECE NUMBER NAME MATERIAL 1 COVER ASSEMBLY MILD STEEL 1/4” Panel 2 DECK RING MILD STEEL 5/16” Frame 3 STRONG BACK MILD STEEL Righthand & Lefthand 4 TEE HANDLE STAINLESS STEEL NEW 7” RADIUS 5 NUT BRASS Clear Opening Sizes: 6 GASKET NEOPRENE 26 x 60 PANAMA CHOCKS 7 WASHER BRASS 8 WASHER NEOPRENE 30 x 60 (Meet Panama regulations) 30 x 66 14” x 10” CLEAR OPENING 30 x 72 With extended legs for welding to deck. PRICE ON REQUEST 14” Wide on base - 28” Length - 27-1/4” High Available in either In Stock Immediate • Delivery NEW 18” & 24” Manual or Quick-Acting Operation NEW HATCH COVERS (4-Dog doors also Flush mounting watertight available) hatch with machined steel Other sizes available mounting ring. T-handle is by special order. recessed and hand tightens against a strongback across mounting ring: 18” 90lbs. - 24” 120lbs. 4-DOG GENERAL PURPOSE FACTORY NEW - SIZE 15x23 15” x 23” x 5” HATCH RAISED BOLTED PLATE MAN HOLE OR TANK TOP COVER NEW 15” x 23” ALSO 1/2” Thick- Cover 3/8” TANK TOP COVERS AVAILABLE Thick 3/8” COVER & 3/4” DECK RING Open and Closed Coaming Complete with Neoprene Gasket w/Brass Washers & S.S. 2-1/2” High Nuts 20 Bolts - Wt. 95 lbs. Chocks Overall dims. of cover Single and Double 20” x 28-3/4” Bitts Overlap for lifting All types of No handles Marine Equipment necessary 24”- 36”- 48” KEVEL CHOCKS POLI MARITIME (formerly of Maritime Power Corporation) 79 West 33rd Street, Bayonne, New Jersey 07002 PHONE: (201) 243-6387 • (201) 858-2675 • Fax: (888)491-4731 • Email: [email protected] See Us on the WEB at www.boats-and-harbors.com BOATS & HARBORS PAGE 14 - SECOND AUGUST ISSUE 2016 WANTVALUEFORYOURADVERTISINGDOLLAR?
5000 ABS All Oceans Cubic Yard Split Hull Dump Scow - Located Florida 4000 ABS All Oceans Cubic Yard Split Hull Dump Scow - Located New York
State Of The Art ABS All Oceans Drill / Blast Barge Hydraulically Operated Spuds • RTK Positioning • Located Houston, TX ADDITIONAL EQUIPMENT FOR SALE SPUD BARGE - 140’ x 85’ x 15’, Loc. in Staten Island, NY Price $450,000 SPUD BARGE - 100’ x 50’ x 8’, Loc. in Staten Island, NY Price On Request DECK BARGE - 110’ x 34’ x 9’, Loc. in Stuart, FL Price $140,000 DECK BARGE - 90’ x 30’ x 9’, Loc. in Staten Island, NY Price $70,000 TUG BOAT - 2200HP - 68’ x 24’ x 7’, Loc. Northeast Coast Price $1,200,000 TUG BOAT - 1200HP - 64’ x 22’ x 9’, Loc. Northeast Coast Price $1,200,000 ADDITIONAL EQUIPMENT FOR RENT JAY MICHAEL FLEXIFLOATS - 40’ x 10’ and 20’ x 10’ 68 x 24 x 7', 98 GRT, built 1980, ON 630308, Twin Cat 3508's, DECK BARGES - From 90’ x 30’ to 240’ x 52’ 2200 hp, 2 x 40 KW gensets, 37,000 gal. fuel, Smatco single drum winch, complete electronics...... $1,200,000.00 SPUD BARGES - From 80’ x 40’ to 250’ x 72’ LYNX ABS BARGES - From 140’ x 39’ to 250’ x 72’ Model Bow Tug, 73.5 x 25 x 9', 119 GRT, off. #: 507788. Blt. HOPPER BARGES - From 150’ x 37’ to 260’ x 52’ 1967, rblt. '90, Martinolich Shipbld., Tacoma WA. Twin screw FLOATING CRANES - From 100 Ton to 750 Ton open wheel. Cat D398 main engs. rated at 915 hp ea. Cat 3192 reduction gear at 5.31:1. Gens: 2 Cat D320, 50 KW ea.. DUMP SCOWS - From 3,000CY to 5,000CY Towing winch: Almond Johnson 320SS, 1450' of 1-1/2” wire. CREW BOATS - Request Bow winch: Foss conversion, 200' of 1-1/8” shipwire. Fuel: 10 Tanks, 24,000 gal. Water: 3 tanks, 3,000 gal. Quarters for 5 PUSHBOATS AND TUGBOATS - From 400 to 3,000HP crew. Comp. elects inc. SSB, AIS, Furuno FR 811 All Equipment For Rent is Located in Staten Island, NY Radar...... $800,000.00 Prices on Request Both Boats Located in North East BOATS & HARBORS Crossville,TN--(931)484-6100Fax:(931)456-2337 TELL‘EMYOUSAWITINBOATS&HARBORS SECOND AUGUST ISSUE 2016 - PAGE 15 VISIT OUR SHIPYARD ORANGE, TEXAS
CALL (409) 988-0005 FAX (409) 988-0006 for SPECS OR QUOTE www.inlandboats.com Email: [email protected] The ORIGINAL Truckable Boat Builders
STANDARD MODELS • CONTINUOUS PRODUCTION CUSTOM BUILT PUSHBOATS & DECK BARGES YOUR DESIGN OR OURS Over 45 Years Building Boats and Barges
110’ X 34’ 1943 STEEL • EX-NAVY REPAIR BARGE
All steel construction Appears to be in Very Good or better condi- tion throughout! CLEAN: Used for Electronics repair. 96’ two- MODEL 2516 MODEL 2510 story house w/ 7’ 2” ceiling 25’9” x 16’0” x 5’6” 25’9” x 10’0” x 4’0” height. 7’ open deck at each 650-750 H.P. Twin Engine 200 H.P. Single Engine end. Approx. 3,250 sq. ft. on each of two decks & below main deck which has refrigerated storage & water integral tank approx. 2500 gal. Fully plumbed w/heads & showers on 2 decks, 500 cu. ft. holding tank. Fully MODERNIZED electrical w/480/240/110 shore power & transformers. Fire suppression sys., Fiber optic wired thruout, vapor proof DOANE lighting. No propulsion or gen set. All interior walls on upper decks removed, totally open space ready for your EASY reconfiguration. Perfect conv. to camp, quarters barge, shops, display, retail, floating residence, etc. Loc. in fresh water at Seattle, WA. $249,500.00 ALL Details • Photos: www.PacificMarine.org Email: [email protected] • (206) 225-3360 Standard 12' Aluminum Gangways MODEL 2512 MODEL 2514 25’9” x 12’0” x 4’6” 25’9” x 14’0” x 4’6” $2200.00 • 12' x 30" 400 H.P. Twin Engine 600 H.P. Twin Engine
Grip Strut Grating • Removable Handrails Handles and Retractable Wheels for easy one man use Contact for more information and pics: DECK BARGES [email protected] / 409-985-2448 120’0” x 30’ 0” x 7’0” MODEL 2520 Sabine Universal Products, Port Arthur, TX Double or 25’9” x 20’0” x 6’0” Single Rake 750 H.P. Twin Engine ® electric incinerating toilets New INCINoleT Model PRoBleM SolVed! Need a toilet in “no discharge” zones? For boat or dock, home or cabin – INCINOLET, your best solution! SIMPle to install, maintain. 120 or 240 volts MODEL 2523 with Quarters MODEL 2520 with Quarters 25’9” x 23’0” x 6’8” 25’9” x 20’0” x 6’0” US Coast Guard Certified 1125 H.P. Triple Engine 750 H.P. Twin Engine UlTRA CleAN: waste reduced to sterile ash. NEW ENGINES WITH FACTORY WARRANTY As little as a cupful weekly. JOHN DEERE & CUMMINS TIER III COMPLIANT Dump in garbage. EXTENDED WARRANTY AVAILABLE ToP QUAlITY: stainless steel, platinum odor control, quality NEW TWIN DISC TRANSMISSIONS controls assure long life. AQUAMET 17 PROPELLER SHAFTS NEW BRONZE 4-BLADE PROPS 1-800-527-5551 HEAVY DUTY QUALITY CONSTRUCTION www.incinolet.com ReSeARCH PRodUCTS/Blankenship • 2639 Andjon • dallas, TX 75220 See Us on the WEB at www.boats-and-harbors.com BOATS & HARBORS PAGE 16 - SECOND AUGUST ISSUE 2016 WANTVALUEFORYOURADVERTISINGDOLLAR? Questions to ask before ordering your sectional barge: 1. Will my barge be designed by experienced engineers? 2. Will my barge be built to my exact requirements? 3. Will my complete satisfaction be guaranteed? If it’s important that the answer to these questions is “YES”, then contact us at: RPS Barge Co. Built to your requirements. Built to last. Guaranteed. 877-826-2617 502-747-5540 www.rpsbarge.com [email protected]
Automatic Pot Line Coilers Major Price Dropon Stellar Conditi PUSHBOAT BARGE The Extra Deckhand® Hydraulic Line Collars CRANE The patented 40# wonder that’s Made in Alaska to be Alaskan Tough WWW.COILERS.NET
FOR SALE E.D. Industries LLC - 10006 Crazyhorse Drive Juneau, Alaska 99801 Tel./Fax - (907) 789-9164 (252) 422-2222 • [email protected] *STEEL PIPE*
NEW & USED STEEL PIPE FOR: Piling, Spuds, Dredging, Ballards, Floats, Casing, Etc. CURRENT SPECIALS 30,000’ 8-5/8” O.D. x .188”/.500” wall pipe 15,000’ 10-3/4” O.D. x .250”/.500” wall pipe 20,000’ 11-3/4” O.D. x .534” wall pipe 40,000’ 12-3/4” O.D. x .250”/.750” wall pipe 10,000’ 16” O.D. x .250”/.500” wall pipe 15,000’ 24” O.D. x .312”/.750” wall pipe 30,000’ 36” O.D. x .375”/.750” wall pipe Plus many more sizes!
CallD AnytimeELIVERY onANYWHERE 2”-46” DiaIN pipe:
US/CANADA/MEXICO/CARIBBEAN CRESTWOOD TUBULARS, INC Phone: (314) 842-8604 Fax: (314) 842-9064 Toll Free (US) 800-238-7473 Email: [email protected] www.crestwoodtubulars.com FOR SALE
65’ Midship Marine 2000 Semi-Submersible Submarine COI 49 + 10 Excellent business opportunity!
42’ Vega Custom Research Vessel - 1977
26’ Naiad RIB - 2013 Cummins QSB 5.9L Diesel - 75 hours.
55’ Acker Sportboat - 1971 - $250,000 NEW Twin Cummins QRSL9 (under 500 hours), NEW 30KW Generator, COI: 24 divers or 44 passengers + 3 crew. (949) 370-7188Recent re-fit; or very [email protected] clean vessel. www.clyacht.com BOATS & HARBORS SECOND AUGUST ISSUE 2016 - PAGE 17 Crossville, TN -- (931) 484-6100 Fax: (931) 456-2337 TELL ‘EM YOU SAW IT IN BOATS & HARBORS MARINE FUEL TANKS www.speedytanks.com ANY SIZE - ANY SHAPE ALUMINUM TANKS FOR GAS OR DIESEL TESTED & BUILT TO U.S.C.G. SPEC.
5 DAY TURNAROUND UPS DAILY ATLANTIC COASTAL WELDING INC. [800] 434-TANK (8265) OR FAX A DRAWING 1-732-269-7992
CLOSING DATES • THIRD AUGUST ISSUE
(To be mailed August 19th) FOR DISPLAY FOR CLASSIFIED August 16th August 18th (9:00 A.M. C.S.T) (1:00 P.M. C.S.T) M/V T-RAY M/V JAX
50’ x 20’ 60’ x 24’ Completely Rebuilt 2006 (3) 6081 John Deere’s (2) S6B3 Mitsubishi’s (2) 30kw Kubota’s • Flanking Rudders (2) 30kw Isuzu Generators Completed November 2015 $550,000.00 $1.150 Million Call Joey (985) 397-2192
41’ CREW BOAT STEVE L REDUCED $75K CONTACT: Jim Irwin PHONE: 908-272-4010 E-MAIL: [email protected] WEBSITE: WWW.WEEKSMARINE.COM
ABS BARGES FOR CHARTER Weeks Marine, Inc. EAST & GULF COAST
Weeks 2222 222 x 60 x 14 ABS Deck/Spuds NEW REDUCED Weeks 2223 222 x 60 x 14 ABS Deck Barge NEW Weeks 2600 260 x 72 x 16 ABS Deck Barge USEC CHARTER BARGES AVAILABLE ON EAST & GULF COASTS. OCEAN & INLAND Weeks 2701 340 x 78 x 19 ABS Deck Barge USEC DECK BARGES, HOPPER BARGES, SPUD BARGES, MATERIAL AND CARFLOATS, Weeks 2702 340 x 78 x 19 ABS Deck Barge USGC Weeks 2902 180 x 54 x 14 ABS Deck Barge NEW ABS 340 x 78 x 19; 260 x 72 x 16; 222 x 60 x 14 & 180 x 54 x 14 DECK BARGES AVAILABLE ON EAST & GULF COASTS. TUGS TO 4000 HP AVAILABLE. FLOATING SOLD LIFT CRANES TO 500 TON. FLOATING DUTY CYCLE CRANES TO 30 CY BUCKETS. EQUIPMENT FOR SALE EAST & GULF COAST BARGES/BOATS FULL SERVICE YARDS ON EAST AND GULF COASTS FOR MOBE SERVICES. CALL WEEKS 226 - JERSEY CITY, NJ FOR COMPETITIVE BAREBOAT CHARTER, MARINE TRANSPORTATION, HEAVY LIFT Steve L 41’ Aluminum Crew Boat $75K AND STEVEDORE RATES. FULL SERVICE PROJECT CARGO RATES A SPECIALTY Weeks 29 100 x 50 x 7.5 Deck w/Spuds $145K Weeks 226 98 x 31 x 9.5 Deck SOLD Weeks 2205 130 x 40 x 11 Sand Scow $50K Weeks 2208 130 x 40 x 11 Sand Scow $50K Weeks 275 290 x 40 x 10.5 Deck w/Spuds SOLD Weeks 285 146 x 38 x 17.5 Hopper Barge SOLD
HAWAII BARGES/BOATS
Weeks 18 110 x 34 x 11 Deck Barge $POR Weeks 64 135 x 50 x 11 Deck Barge $POR Weeks 68 105 x 70 x 12.80 Deck Barge $POR Weeks 190 180 x 54 x 12 Deck w/Bin $POR CLYDE FRAME 6 THREE DRUM Weeks 538 160 x 50.5 x 12.4 Whirley Crane $POR Rick H - Tug Model Bow 43.6 x 15 x 4.6 Single CAT D-343 - Hawaii SOLD CARGO CRANES
Haggland Cranes Located Houma, LA $335K Ea.
WINCHES
Clyde Frame 6 (3) Drum, Good Shape, No Power $75K WEEKS FLEXI FLOATS FOR CHARTER Skagit RB 100 Two Drum SOLD 40 x 10 x 7 AND 20 x 10 x 7 SIZES Buckets, Cranes, Hammers, Winches and Other Heavy LOCATED AT OUR CAMDEN, NJ YARD Equipment Also Available - See Website REDUCED www.weeksmarine.com
WEEKS 29 - CAMDEN, NJ PAGE 18 - SECOND AUGUST ISSUE 2016 See Us on the WEB at www.boats-and-harbors.com BOATS & HARBORS WANT VALUE FOR YOUR ADVERTISING DOLLAR? www.Sightseerboats.com BARGES Quality and Affordability All Boats Built To USCG Partially Protected Criteria FOR SALE Eco-Tour, City Tour, Party Cruise, Water Taxi’s Boats 35’, 40’, 45’ & 50’ Lengths – 10, 12, 13 & 14 Ft. Widths Please Contact: John (281) 628-5820 SPUD BARGE • 140 x 35 x 10 [email protected] $115,000
All Aluminum Construction Means Lower Operational Costs & Requires Smaller HP Motors. Dual & Multiple Route COI’s Available
SPUD BARGE • 100 x 28 x 5 RAMP BARGE • 108 x 24 x 6 $67,500 Firm $67,500 Firm
Specializing In Residential & Custom Docks, Commercial Work, and Shore Stabilization, Mainly Along the Coast of Maine Fiberglassed Deck - Shallow Running Hulls • Now Taking Orders With 10-16 Week Delivery Barge Rental Also Available
40’ • 42 Passenger 35’ • 36 Passenger ”V” Bottomed Catamaran Hulls FACTORY DIRECT SERVICE & PRICING BUILT TO MEET YOUR SPECIFIC APPLICATION & SITUATION Powered By Mercury 4 Stroke Technology Rockland, Maine Full Turnkey Boats Starting Under $100K 207-594-9565 www.prockmarinecompany.com 727.856.6900
CLOSING DATES • THIRD AUGUST ISSUE
(To be mailed August 19th) FOR DISPLAY FOR CLASSIFIED August 16th August 18th (9:00 A.M. C.S.T) (1:00 P.M. C.S.T) BARGES FOR SALE
A WINNING COMBINATION
THE ONLINE DIGITAL EDITION AND OUR PRINT 500 Ton Jack Up Barge (6 Legs) EDITION OF 92’ L x 70’ W x 9’3” D. Barge in Very Good Condition. Price on Request. BOATS & HARBORS® Buy and sell anything connected to the commercial marine industry using our time proven print edition and the power of the internet!
Self-Propelled Double Skin Tank Barge To View Our DIGITAL EDITION or 1,350 Mt Capacity. 168’ L x 41’ W x 16’6” D. Contact Us Online Go To: Barge in Very Good Condition. Price on Request. www.boats-and-harbors.com For More Information Please Contact Paulo Pessoa: For More Information Call: (905) 515-1435 • [email protected] (931) 484-6100 BOATS & HARBORS Crossville, TN -- (931) 484-6100 Fax: (931) 456-2337 TELL ‘EM YOU SAW IT IN BOATS & HARBORS SECOND AUGUST ISSUE 2016 - PAGE 19 MARINA EQUIPMENT FOR SALE 1999 Taylor TM120 2008 Hoist M270 Smithwick & Mariners Insurance, Inc Specializing in Inspected Passenger Vessels, Marinas, Boatyards, Boat Dealers, Mobile Marine Repairers & Various Commercial Marine Businesses as well as Yachts & Private Pleasure Boats 4 Rebuilt Engine, New Rims, New Tires, New 20’ Late Model Hoist in good condition ready to go to Commercial Fishing, P&I, Lobsterboats Marina Forks, 30’ positive lift, new 20’ long forks. work. This heavy duty model will lift 27,000 lb. boats. 4 Diesel engine runs good. Solid Taylor drystack avail- Auxilary factory counterweight included. 30’ positive Pollution Coverages able now. Good running forklift. $49,000 lift, 12’ negative lift, 22’ long forks. $77,000 4 2006 Hoist M250 2004 75 Ton Marine Travelift NHCFA: Fishboat Program (New Hampshire) 4 with Remote in exc. Charter Vessels cond. Late model 4 75 BFM11 metric ton Loss Free Credit/Loss of Income cap., (165,000 lbs) 4 w/lots of extras. (2) Payment Term Options speed hoist, (2) speed drive, remote control. John Deere dsl engine Call to customize a program for your needs: 4045TF w/low hrs. Regularly serviced & maintained by authorized Hoist 25,000 lb., Drystack ready to work. 35’ positive dealer. ICH: 26' ICW: 23' lift, 20’ long forks, runs strong. Available now. $69,000 $269,000 603-394-7008 1985 60 Ton Marine Travelift 1975 Midland Ross Travelift
(3) EA. 55’ Derecktor Ex-USCG Workboats
75,000 lb. (35 Ton) Capacity, Used Every Day! Solid 60 Ton Marine Travelift, Heavy Duty Hoist in Good low cost 75,000 lb. boat hoist by Midland Ross. 18' Condition. Used 1985 Marine Travelift 60BFM, 120,000 Inside Clear Width 18' Inside Clear Height Gas lbs Capacity, 60 tons, Good Condition, ICW 22 ft, ICH Engine Current owner uses everyday. Great price for 23ft, Gasoline Engine (Low Hrs) (Repowered), Power entry level hoist or second hoist. Available late Sling Adjust, Spreader Beams. Now Available. $49,000 October 2016. $18,000 (305) 882-7000 • [email protected] All three boats are a matched set and are in good operational condition. Surveys Available. For more information please contact Mike Majewski 850-221-5138 or [email protected] INDUSTRIALDIESEL,INC.INDUSTRIALDIESEL,INC. 8705 HARMON • FORT WORTH, TX 76177 • Ph:Ph: 817-232-1071 817-232-1071 • • FAX: FAX: 817-232-0354 817-232-0354 • • WATS: WATS: 800-323-3659 800-323-3659 WORLD WEB WEBSITE • http://www.industrialdiesel.net • EMAIL: [email protected] NO C.O.D’S PLEASE SEE OUR COMPLETE INVENTORY ON THE WORLD WIDE WEB WE ACCEPT VISA AND MASTERCARD Se Habla Español CUMMINS POWER UNITS KT 19/1150 $ 5,000 KT 19/1150 BLOCK NEW STYLE 12 BOLT FRONT...... $ 4,500 KT 19/1150 BLOCK NEW STYLE 11 BOLT FRONT...... $ 4,500 KV 50/3067 CRANKSHAFT NEW STYLE STD/STD...... $ 10,000 4-71T Detroit VT 28/1710 CRANKSHAFT NEW STYLE STD/STD...... $ 5,000 Power Unit KV 38/2300 CRANKSHAFT NEW STYLE STD/STD...... $ 8,000 160 HP, QSK 19 CRANKSHAFT NEW STYLE STD/STD...... $ 5,000 Low Hours KV 38/2300 CRANKSHAFT NEW STYLE STD/STD...... $ 8,500 BLOCK NEW STYLE VALLEY COOLED STD...... $ 500 $8,500 QSK 19 QSK 19 FRONT COVER NEW STYLE NEW TAKE OFF...... $ 3,000 QSK 19 AFTER COOLER ASSY. NEW STYLE NEW TAKE OFF...... $ 350 3054C Caterpillar Power Unit OIL PANS NEW STYLE NEW TAKE OFF...... 160 HP, Low Hours - $6,000 NEW MARINE PARTS NT 855 $ 950 NT 855 WET ExHAUST MANIFOLD NEW...... $ 350 GENERATOR SETS NT 855 MARINE THERMOSTAT HOUSING NEW...... $ 750 NT 855 MARINE FLYWHEEL SAE #1 NEW...... $ 1,000 KT 19/1150 MARINE BELL HOUSING NEW...... $ 1,100 KT 19/1150 WET ExHAUST MANIFOLD NEW...... $ 105 KT 19/1150 3003657 CONNECTOR NEW...... $ 115 KT 19/1150 3004718 CONNECTOR NEW...... $ 80 KT 19/1150 3003662 TUBE NEW...... $ 85 3004716 TUBE NEW...... REBUILT BLOWERS Caterpillar C4.4 Power Unit 3-53, 4-53, 6V53, 4-71, 3-71, 2-71, 6-71, 12V71, 6V92T & 8V92T Tier III, 100 HP RTO - Call For Pricing EXCHANGED - $ 600.00 • OUTRIGHT - $ 800.00 - $1,000.00 600KW D398 Caterpillar Generator Set 3412 - 5,000 • KT19 - $4,500 • 3306 - $1,450 Prime Power, 2556 Hours NEW 3304 - 750 • 3306 - 875 • 3408 - $4,000 • 6BT - $7000 $35,000 CRANKSHAFTS INVENTORY & OVERHAUL KITS COMPONENTS! CUMMINS
Perkins 1104 Tier IV Power Unit Overhaul Kits Cylinder Heads, D399 Caterpillar Engine In-Frame Kit 100-117 HP RTO, Low Hours - Call For Pricing Valves and Springs 1200 HP, $ 736 $ 825 MASTERDEALER 102 Hours since new. 4BT, 3.9 $ 928 4BT, 3.9 $ 900 6BT, 5.9 $ 1092 6BT, 5.9 $ 1400 PERKINS OVERHAUL $58,000 6BT 5.9 LATE $ 2080 6BT, 5.9 LATE $ 1500 KITS 6CT 8.3 $ CALL 6CT, 8.3 $ CALL KT19,1150 KT19,1150 Complete Overhaul Kits Call for pricing on other models $ 858.50 3.152 758.50 KT38 Cummins Engine CATERPILLAR 4.108 754.00 950-1200 HP, 4.203 898.24 4.236 Caterpillar 3126 Tier II Power Unit Rebuilt Overhaul Kits 1079.03 Cylinder Heads, G4.236 200 HP RTO, Low Hours - $7,500 $65,000 In-Frame Out-Frame 1392.88 Valves and Springs T4.236 1099.87 Rebuilt Detroit Diesel Kit Kit 4.248 1432.00 Rebuilt Cummins $ 844 $ 892 $ 800 DI 4.318 Marine Engines 3204 3204, 3208 1023.65 $ 1208 $ 1319 $ 764 DI 1004-4 1464.67 Diesel Engines 3304 PC NEW 3208 $ 1167 $ 1477 $ 1100 NEW T1004-4 1807.05 Keel Cooled Exch$ Price 7,000 US Outright$ Price10,500 US 3304 3304 DI 6.354 3-71 $ 1730 $ 1997 $ 2000 NEW 1933.33 $ 8,200 $ 11,700 3306 3306 DI, PC 6.3544 1652.19 4-71 Exchange Outright $ 2272 $ 2603 $ 2143 NEW $ 10,000 $ 13,500 $ 24,500 $ 31,500 1006-6 2360.00 6-71 KT19 / 1150 / 450 3406 $ 3269 $ 4202 3406A, B $ 2000 NEW $ 12,200 $ 16,000 $ 26,500 $ 36,000 1006-6T 3269.00 8V71 KTA19 / 1150 / 525 / 600 3408 3408 A, B $ 14,000 $ 19,700 $ 43,000 $ 55,000 $ 4806 $ 5699 $ 2500 V8.540 8V92 N $ 28,550 QSK19 3412 3412 A, B $ 20,500 $ 75,000 $ 95,000 12V71 N $ 36,000 $ 46,000 KTA38 High Profile DETROIT 16V92 N $ 80,000 $115,000 Exchange Price Includes New Air Silencer. KTA38 Low Profile $ 90,000 $125,000 Outright Price Includes Exhaust Manifold, KTA50 High Profile Overhaul Kits Flywheel, Tank Silencers. $ 95,000 $135,000 Cylinder Heads, Valves and KTA50 Low Profile Model In-Frame Out-Frame Model In-Frame Out-Frame $145,000 $195,000 Kit Springs QSK50 Kit Kit Kit Heat Exchanger Exch Price Outright Price Prices are for standard industrial engines. 3-53 $ 683.00 NEW 6v71 $ 900 US US $ 750.00 6v71 $1450.00 $1534.00 3-53 $ 850 $ 9,500 $ 12,500 Prices subject to change for non-standard engines. NEW 3-71 4-53 $ 872.00 $ 962.00 6v71 xH $1768.00 $1859.00 4-53 $1000 8v71 $1200 $ 10,000 $ 14,000 NEW 4-71 6v53 $1316.00 $1400.00 8v71 $1781.00 $1830.00 6v53 $ 850 12v71 $1600 $ 11,500 $ 15,000 2-71 $ 502.00 $ 550.00 8v71 xH $2336.00 $2385.00 2-71 $ 700 16v71 $1200 6-71 $ 18,500 $ 14,500 3-71 $ 671.00 $ 752.00 12v71 $2547.00 $2747.00 3-71 $ 900 6v92 $ 800 8V71 $ 16,500 $ 24,500 8V92 N CALL NOW!! 3-71 xH $ 872.00 $ 957.00 12v71 xH $3348.00 $3473.00 4-71 $1200 8v92 $1200 $ 22,500 $ 32,000 4-71 $ 879.00 $ 988.00 16v71 $3550.00 $3645.00 6-71 $1600 12v92 $ 800 12V71 N $ 38,000 $ 47,500 16V92 N Inquire about our used DDA 4-71 xH $1157.00 $1251.00 16v71 xH $4635.00 $4730.00 8.2 $ 950 16v92 $1200 Exchange Price Includes New Air Silencer. 6-71 $1387.00 $1532.00 6v92 $2003.00 $2148.00 60 Series $1600 Outright Price Includes Exhaust Manifold, Flywheel, Tank W/P, Pipes For Raw W/P, Air parts Inventory & Components 6-71 xH $1773.00 $1914.00 8v92 $2531.41 $2706.07 Silencers. 8.2 $1473.00 $1530.00 12v92 $3990.00 $4928.00 60 Series $2977.00 $3012.00 16v92 $5100.00 5469.00 See Us on the WEB at www.boats-and-harbors.com BOATS & HARBORS PAGE 20 - SECOND AUGUST ISSUE 2016 WANT VALUE FOR YOUR ADVERTISING DOLLAR?
SQUARE INTERNAL PILE GUIDES
For replacement roller assembly or parts see page 19.
RECOMMENDED USE FOR RECOMMENDED USE FOR PILING 10” IN DIA OR LESS PILING 10” IN DIA OR LESS
HP-12IN Ship# 42 $150.74 HP-12INR Ship# 43 $154.62
RECOMMENDED USE FOR RECOMMENDED USE FOR GUIDES PILE PILING 13” IN DIA OR LESS PILING 13” IN DIA OR LESS
HP-15IN Ship# 53 $165.68 HP-15INR Ship# 54 $170.52
RECOMMENDED USE FOR RECOMMENDED USE FOR PILING 16” IN DIA OR LESS PILING 16” IN DIA OR LESS
HP-18IN Ship# 58 $174.47 HP-18INR Ship# 59 $178.84
HOOP PILE HOLDERS Our convertible Hoop Pile Holders have 3 basic pieces, a dock bracket, a hoop and a roller assembly. This allows you to have a hoop pile holder the way you want it, whether it be a permanent hoop, a removable hoop or a hoop with a roller. All Hoops on this page are 1-1/2” schedule 40 pipe. The dock brackets are 4” x 6” x 1/4” angle. The Roller assembly features a 6” solid poly roller and can be bolted to the deck plate or directly to the dock. All parts are hot dipped galvanized. Add a UHMW Roller to any assembly as shown at the bottom of page 19. RECOMMENDED USE FOR RECOMMENDED USE FOR PILING 6” IN DIA OR LESS PILING 3” IN DIA OR LESS
Ship# Price Ship# Price Ship# Price Ship# Price HP-H8 8” Hoop 8# $35.93 H-RA Roller Assembly 5# $25.67 HP-H10 10” Hoop 9# $38.55 H-RA Roller Assembly 5# $25.67 HP-DP8 Deck Plate 13# $33.28 HP-HBR Assembly Complete 26# $94.88 HP-DP10 Deck Plate 13# $35.31 HP-H10R Assembly Complete 27# $99.53
RECOMMENDED USE FOR RECOMMENDED USE FOR PILING 10” IN DIA OR LESS PILING 12” IN DIA OR LESS PILE GUIDES
Ship# Price Ship# Price Ship# Price Ship# Price HP-H12 12” Hoop 11# $43.42 H-RA Roller Assembly 5# $25.67 HP-H14 14” Hoop 12# $47.34 H-RA Roller Assembly 5# $25.67 HP-DP12 Deck Plate 16# $37.34 HP-H12R Assembly Complete 32# $106.43 HP-DP14 Deck Plate 16# $38.30 HP-H14R Assembly Complete 33# $111.31 RECOMMENDED USE FOR RECOMMENDED USE FOR PILING 16” IN DIA OR LESS PILING 14” IN DIA OR LESS
Ship# Price Ship# Price Ship# Price Ship# Price HP-H16 16” Hoop 14# $51.91 H-RA Roller Assembly 5# $25.67 HP-H18 18” Hoop 14# $56.26 H-RA Roller Assembly 5# $25.67 HP-DP16 Deck Plate 18# $42.04 HP-H16R Assembly Complete 37# $119.62 HP-DP18 Deck Plate 18# $43.94 HP-H18R Assembly Complete 37# $125.87 NOT SHOWN - 20” opening - HP-H20 - $60.61 / HP-DP20 - $45.88 / HP-H20R - $132.16 BOATS & HARBORS SECOND AUGUST ISSUE 2016 - PAGE 21 Crossville, TN -- (931) 484-6100 Fax: (931) 456-2337 TELL ‘EM YOU SAW IT IN BOATS & HARBORS
WOOD DOCK HARDWARE MADE WITH 1/4” HIGH STRENGTH STEEL THEN HOT DIPPED GALVANIZED
Outside Corner End (H-OCE) is used at the ends of fingers, ends Outside Corner Male (H-OCM) has one 1/2” tab and a hole for a 3/4” bolt of dock or for swim platforms. or B-PIN. Would be used with an Outside Corner Female (H-OCF) or with a
Single “T” Female (H-SF). H-OCM Ship#8 $18.71 HARDWARE DOCK WOOD H-OCE Ship#7 $12.98 HARDWARE HEIGHT 5” Merco Marine is a manufacturer of boat dock building components and accessories. We were established in 1979. Everything we manufacture is made in the United HARDWARE THICKNESS States, with US Steel, and US workers. 1/4” The products shown here are only a small portion of the over 2000 items that we Inside Corner (H-IC) has slots and can be used with 1-1/2” - 3” thick wood. The inside corner sandwiches the wood between the opposite manufacture and keep in inventory for Outside Corner Female (H-OCF) has two 1/2” tabs and a hole for a 3/4” outside corner, keeping bolts from burying themselves in the wood. A bolt or B-PIN. Would be used with an Outside Corner Male (H-OCM) or with boat dock building and marina. corner gusset gives the unit a lot of strength and helps from racking a Single “T” Male (H-SM). H-OCF Ship#9 $22.23 the dock. H-IC Ship#7 $13.95 For a complete list of our products check us out on the web at www.mercoboatdocks.com or give us a call at 304-737-3006. You can also request a free copy of our 65 page catalog.
Merco Marine can provide simple parts Single “T” Female (H-SF) has two 1/2” tabs and is used with an and pieces for your small pond or lake Outside Corner Male (H-OCM) or a Single “T” Male (H-SM). Both male dock to build on site, or we can build and female singles can be bolted to the side of a dock to make finger Single “T” Male (H-SM) has one 1/2” tab and is used with an attachments. They can also be bolted to seawalls to make ramps. Outside Corner Female (H-OCF) or Single “T” Female (H-SF). entire marinas from start to finish. H-SF Ship#4 $13.04 H-SM Ship#3 $9.22
WOOD DOCK HARDWARE MADE WITH 1/4” HIGH STRENGTH STEEL THEN HOT DIPPED GALVANIZED
Washer Plates (H-W) are used mostly with Angles (H-A) and Cleat Backup Plates (H-B) are used with SIngle “T” Angles (H-CA). The square hole in the Angles (H-A) used to hold all cross stringers to side Males (H-SM) and SIngle “T” Females (H-SF) for plate keeps the carriage bolts from stringers using a Washer Plate (H-W). The wood is additional strength and to keep bolts from pulling turning when the bolts are tightened. sandwiched between the steel and creates a solid through the wood. H-B Ship#2 $3.30 H-W Ship#1 $1.24 corner. H-A Ship#2 $3.45
HARDWARE THICKNESS 1/4”
Cleat Angles (H-CA) have slots for various sizes of cleats. The WOOD WOOD DOCK HARDWARE cleat angle is bolted to the side stringer using a Washer Plate Inside Corners/3” I.D. Pipe Holder (H-IC3) has a 3” I.D. pipe (H-W). The cleat is then bolted through the deck into the cleat holder welded in place. It can be used to replace a regular inside angle. This keeps the cleat from pulling out of the deck. corner. It will accommodate a 2” I.D. pipe. H-CA Ship#2 $4.88 H-IC3 Ship#13 $26.31
3” Pipe Holder (H-OCEP3) outside corner end with a pipe holder weld- ed to the end. 3” opening for 2” pipe. Save money by getting 2 pieces of hardware in one H-OCEP3 Ship#11 $23.19
3” Pipe Holder (P-3) can bolt to the side stringer and uses 2” standard pipe to anchor docks in place. P3 Ship#6 $16.41 PAGE 22 - SECOND AUGUST ISSUE 2016 SeeSee Us Us on on the the WEB WEB at at www.boats-and-harbors.com www.boats-and-harbors.com BOATSBOATS & & HARBORS HARBORS PAGE 22 - SECOND AUGUST ISSUE 2016 WANTWANT VALUE VALUE FOR FOR YOUR YOUR ADVERTISING ADVERTISING DOLLAR? DOLLAR? Maximize Your Profit - Minimize Your Cost!! Experience The Selling Power of The Boats & Harbors Classifieds Yellow Sheet! PlacePlace Your Ad (931) 484-8708484-8708 OORR Email: [email protected] • Fax: (931) 456-2337 • SubmitSubmit Online:Online: www.boats-and-harbors.comwww.boats-and-harbors.com BOATS FOR SALE ★ 40 FT WALK AROUND Cabin, AC, head / RESEARCH/SUPPLY VESSEL For Sale! FULL PERMIT SERVICES: Buy, sell, renew, charter, 20 people total, COI current, feder- 60ft x 25ft with 4.5ft draft Max Crew: 6' Steel transfer, broker your federal fisheries per- al fish permits, twin 370 HP Yanmar diesel, Hull Catamaran, 15KW & 6 KW Generators, mits. File no fish reports, vessel documenta- 110' x 26' STEEL Fishing Boat. 16V149 less than 2,000 hours, home port Dauphin 2800 Fuel Tank / 3400 gal Potable water. tion, VMS activation. Expired permit solu- main. Two 471 - 50W gens. Complete RSW Island, AL. Call Mike @ (251) 421-7560. $125,000 OBO. (850) 747-4999 tions. (361) 356-1172 refrigeration system. 671 GM engine for deck winches. 350,000 lb hold capacity. Ready to work. Located in Mid-Atlantic. 90' x 22' x 8', CREW / SUPPLY Vessel, alu- TRUCKABLE PUSHBOATS. Twin screw. I BUY AND SELL South Atlantic snapper / $249,000 OBO. (804) 761-0673 minum, fresh COI, 36 passengers, triple de- One aluminum. One steel hull with alumin- grouper, Gulf reef, red snapper, shark, troit 12V-71 engines, clear deck 40' x 22' um pilot house. $90K each. Call: (281) 635- sword, king mac, others. Dave (904) 708- deck cargo 15 long tons, 2,100 gallons of 7151 0893, (904) 262-2869 Email: [email protected] 125' EX-COAST GUARD Cutter Morris. fuel. Reduced $260,000.00 USD, Texas. 1927 / 2010, recent $2 million overhaul. Low Telephone: (281) 635-7151 ★ PUSHBOATS FOR SALE E-mail: [email protected] hour KTA's & gens, new wiring, piping, WATER TAXI / TENDERING Boats. 30' decks, hull plating, electronics & more. Rio Trans vessels "Shoreboats" in excellent Vista, CA. Reduced to $240K. (916) 715- condition, cert. for 31 to 39 pass., valid 2016 NEW BUILD Truckable Tug 25' x 13' x 0563 95' EX-NAVY, PTF-26, Liberty. Vietnam War COI's & endorsments, John Deere engines, 4', 600 hp, Tier 3, $225,000. Contact Jason See: libertymaritime.org near-coastal gun boat. Aluminum hull. "The AQMD, tier 2, $195,000 - $220,000. FMV (757) 630-9022 Last American PT Boat." Rio Vista, CA. 50' Trans vessel "Navy utility conversion [email protected] $185K. (916) 715-0563 boat" sold "as is", cert. for 90 pass, 671N 180' x 40' OFFSHORE SUPPLY Boat. Cat See: libertymaritime.org Detriot diesel (low hours), Twin Disc power. Motivated seller. Clear deck space, MG509, $35,000 OBO. Call Michele (562) IRONHEAD, 500 HP, 40' x 14' x 5', 20GT, 124' x 32'. Capacity on deck 675 tons. 688-2116 cell. built 1998, re-built 2012, ON: 1095072, (2) Winch with 100,000 lb. single line pull. ADMIRAL'S BOAT 40PE 9,006, 41'23" x [email protected] John Deere 6076 ALM with Twin Disc Crane - telescopic. Stern roller. Bow 11'83" , carried onboard the USS Harry Tru- MG5091 2.95:1 gears. $145,000. Call office man Battle Group, 43 person, twin Cum- for additional information: thruster. Cold air conditioning. US flag. Gulf ★ BOATS FOR SALE of Mexico. Reduced from $475K to $375K, mins 6BTA 5.9L, 300 HP each, Twin Disc 1-888-MR-BARGE, (617) 984-0022 USD. Bargain! Call: (281) 635-7151. gears, twin cabins, teak decking on all OR LEASE [email protected] E-mail: [email protected] weather decks, forward & aft. air condition- ing, galley, refrigerator, microwave, coffee maker, Raritan marine head, magnetic com- 220' OFFSHORE SUPPLY VESSEL, USCG TRUCKABLE 20 x 8 Push Boat, 471 Detroit, 1979 HALTER 95.4 x 21, crew / OSV triple pass, search light, radar, horn, cockpit cour- certified and ABS class. Call for pictures and ZF gear, keel cooled, flanking rudders, 15'6" screw / wo. mains or gears. Located in tesy lights, teak dive platform, black Imron detailed specs. (415) 616-3472 eye level, hydraulic wheel house tilts for- Galveston, $75K OBO. Call Richard (713) paint on sides, fresh bottom paint, etc. Very [email protected] ward for trailering. Fresh water only. Central 705-0037. low hours, sacrifice $59,500. (850) 814- Texas. $40,000.00 Excellent condition. 2763 or (850) 819-4572 (512) 755-2661 ★ BOATS FOR LEASE 1981 SWIFTSHIP 91 x 19.6' crew / OSV WANTED: Your advertisement here! Now is the triple V12711T, 2,600 fuel cap. Current COI 34' UNIFLITE GEOLOGICAL survey boat, 3208T Caterpillar diesel engine, 255 HP, 9 CREWBOATS / SAFETY Boats for lease. time to let Boats and Harbors expose your busi- / working boat in the Gulf of Mexico. $300K ness to a National and International readership! OBO. Call Richard (713) 705-0037. beam. $18,000 OBO. Eddie Bogle (270) Truckable aluminum crewboats 22' - 44', 535-2886 6-15 pax, up to 40 knts., available bare- Increase your sales with a classified ad. Call [email protected] boat or w/ crew. Can deliver anywhere. Now: 931-484-6100 or Email: 1986 FORTIER 26. Volvo 42B, about 4,000 Contact Kevin @ (410) 977-0028 [email protected] hours. Tower, pulpit, chair, outriggers, full Email: [email protected] electronics, ZF transmission, autopilot, BOAT / TOUR / EXCURSION, 52 LOA, 50 TUGBOATS FOR SALE thruster. Turn-key sportfisherman. Asking passenger (seated) plus crew, current COI, ★ FLOATING DOCKS ★ $37,500. Call, email or text David (631) 721- built 1994, 1500 HP Detroit Diesel power, FOR SALE 7410. fast fun rides. $249,000.00. Biloxi, MS (228) [email protected] 392-2200 JAY MICHAEL. 68 x 24 x 7', 98 GRT, built For picture: [email protected] 1980, ON 630308, Twin Cat 3508's, 2200 2 SETS 12' x 40' x 25" freeboard American. hp, 2 x 40 KW gensets, 37,000 gal. fuel, Meeco galvanized docks, 2 - 30' x 4' Ravens Smatco single drum winch, complete elec- 1989, 62' FIBERGLASS over plywood com- ADA ramps. Concrete tile decks, 4 - pipe mercial longline vessel, 22' beam, 3306 HAVE MARINE PARTS YOU NEED to sell? tronics. $1,200,000.00. Location: Staten Is- spuds per dock. Fresh water. Bob (954) land, NY. Call office for additional informa- CAT, 509 Twin Disc gear, 950 gal fuel tank, Let Boats & Harbors help you! (931) 484- 471-7538 420 gal water tank, 25k fish hold, Carr LL 6100 or place your ad online at tion: 1-888-MR-BARGE, (617) 984-0022 spool & electronics. Good running condition. www.boats-and-harbors.com Located in Cortez, FL. $49,000. Karen (941) ★ BOAT DELIVERIES [email protected] 704-7643 CAMCRAFT 90' x 22', 20' x 40' Clear Deck. 'LEONA B' Model Bow 1972, Twin V12 149 Mains: Detroit 12V71 TI, USCG Cert. 36. TX EXPERIENCE AND RELIABILITY. Echo DT. 1450 hp, 30kw & 40kw. Towing ma- 1991 THOMAS MARINE EXPLORER. Re- Gulf Coast (361) 220-1765 Negotiable Seller Yacht Delivery is an agency of mariners with chine, 63 x 24 x 10, GT99. Great Lakes. powered 2008 with Mercruiser 350 FWC- varying skills and licenses. We deliver $600,000 OBO. (414) 588-7784 143 hours. Radar, Windlass, Bow Thruster, yachts and commercial vessels in the U.S., GPS. Originally built for Washington D.C. CHESAPEAKE BAY BUILT Classic 110 Canada, Mexico and the Caribbean. Four- Police Dept. Asking $72,500 Please call passenger vessel. 65 LOA, 60 ton, two 6- teen years in business. For an estimate call LYNX. MODEL BOW Tug, 73.5 x 25 x 9', Tony at (631) 317-5305 71 Detroit, current COI. Business and / or today (321) 514-5046 119 GRT, off. #: 507788. Blt. 1967, rblt. '90, boat for sale, ready to cruise this season. [email protected] Martinolich Shipbld., Tacoma WA. Twin (240) 463-1510 screw open wheel. Cat D398 main engs. 1995 7 METER WILLARD RHIB, total gov. www.WestRiverCruises.com rated at 915 hp ea. Cat 3192 reduction gear rebuild 2005, every switch works. GPS EXPERIENCED PROFESSIONAL, World- at 5.31:1. Gens: 2 Cat D320, 50 KW ea.. 2012. Great condition. Dual axle trailer in- wide, licensed masters and crews. Bayfront Towing winch: Almond Johnson 320SS, Marine, Inc. Mel or Diane Longo. (904) 824- cluded. $29,000. (607) 434-9559 COMMERCIAL BOATS, Shrimp, lobster, 1450' of 1-1/2" wire. Bow winch: Foss con- See at: davereesmarine.com 8970 version, 200' of 1-1/8" shipwire. Fuel: 10 crew, ships. (321) 784-5982 www.bayfrontmarineinc.com www.shipsusa.com Tanks, 24,000 gal. Water: 3 tanks, 3,000 gal. Quarters for 5 crew. Comp. elects inc. 20 x 7 FIBERGLASS LIFEBOAT w/ 2 Deutz VESSEL DELIVERY and Management Ser- SSB, AIS, Furuno FR 811 Radar. engines. Super-robust. $5K. Fort Lauder- CREW, DIVE, SUPPLY VESSEL, current vices. Connecting you with the licensed $800,000.00. Location in NY Harbor. Call of- dale. (954) 732-1917 COI, 22 passengers, 65' x 16.6' x 7.8'. Twin masters and crews you need! Call Captain's fice for additional information: Iveco engines, 1,040 HP, very nice, well Connections, Inc. (850) 890-0646 1-888-MR-BARGE, (617) 984-0022 cared for aluminum vessel. Texas, US flag. www.captainsconnections.com [email protected] 2002, 60' ALL ALUMINUM Power Cat, Twin $250K. Call: (281) 635-7151 700 Lugger engine with 1800 hours, 20 KW Email: [email protected] Northern Lights Gen., full electronics, full ★ PERMITS FOR SALE TUGBOAT FOR SALE. 70 ft x 17.2 x 8.5 ex- galley, 2 staterooms, air & heat, 1500 Davit, navy hull. Main engine 3508, 855 HP with 1400 fuel, 150 water. Ready to cruise. Best EX-USCG Fiberglass Motor surf boat. 353 Twin Disc gear. Boat is in working condition. offer. (361) 816-5190 GM Diesel. Fuel water separator, 120 hours, ALL TYPES of Permits For Sale!!! Rock Located Balboa, Panama. Priced: $285,000 aluminum frame canopy. Rod holders. Shrimp, King Fish, South Atlantic Snapper USD. Contact: (561) 400-4454 or Double frame trailer, electric brakes, winch, Grouper, Gulf 6 Pack reef & pelagic, Com- [email protected] 2006 SHAMROCK 247 open diesel! Under new 10 ply tires. $22,000. (219) 395-1577. mercial Gulf Reef Fish, 200 LB Snapper, 1,000 hours Yanmar 260 BY professionally Long Line packages. Many other permits USED TRUCKABLE STEEL Push Boat for maintained. Furuno electronics, radar, etc. avail. We buy, sell, & broker all types of per- sale. 2013 Freshwater boat, Twin Cummins Fully loaded with trailer. Great condition. SEA BREEZE. Valid COI thru 2016. Alum. mits. Please call for prices. John Potts Jr. Tier rated power. $165,000. Bob Carlson $39K OBO. (252) 453-9500 Crewboat, blt. 1978, 45 x 15 x 5.6'. Cert. for (321) 784-5982; (321) 302-3630 (954) 224-2628 44 pax, ON 602377. Twin 8V71's, 700 Hp, www.shipsusa.com www.workboats-usa.com 13 KW Kohler Gen. $250,000.00. Location: 24' TRAILERABLE Push / Work / Crew New York. Call office for additional informa- TUGBOATS FOR HIRE Boat, aluminum Monark with good running tion: CAN LOCATE ANY PERMIT, commercial or ★ 453 N Detroit and 3 axle trailer. $20,000 1-888-MR-BARGE, (617) 984-0022 charter. 28, 33, 48 Passenger charter per- OBO. Please call (812) 305-0688 or [email protected] mits available now. (361) 356-1172 Email: [email protected] [email protected] COASTLINE MARINE TOWING, INC. - 1,000 HP tugs for hire East Coast. (732) FOR SALE: COMMERCIAL Tugs, barges, FLORIDA LOBSTER DIVE permit, $25,000. 495-4410. Please visit our web site A PICTURE IS WORTH a thousand words! dredges, work boats, passenger vessels, Chris (941) 270-2181 or www.coastlinemarinetowing.com Run a display ad today! (931) 484-6100 or ferries, landing craft, air boats, hovercraft, [email protected] anchors, propellers, winches, ship parts You can place your ad at ★ TOWING/SALVAGE from Great Lakes freighters, marine diesel WANTED www.boats-and-harbors.com engines & transmissions, generators, mar- FOR SALE 6 PACK reef fish / pelagic per- ine antiques. Listings welcome. Scruton mit, GOM, $25,000.00 firm. Call (850) 234- Marine Services (519) 583-1636, Fax (519) 6740 or 30' USCG STEEL PATROL/Utility, 1955. 583-2189 Email: [email protected] CONSULTING SERVICES on yacht sal- Low time Detroit 671 and transmission. www.scrutonmarine.com vage collection issue. Fax: (866) 543-6877 Great Lakes boat. Excellent condition. Email: [email protected] $29,000 (231) 313-1946 NEED HELP PLACING A DISPLAY AD? GOOD STEEL BOATS made for work, self- Call us today! 1-931-484-6100 Or go online bailing assist, utility and bridge construction NEW YORK STATE Marine Highway Trans- 34' CRUSADER, COMPLETE BOAT, 1980, boats. (508) 264-6863 to www.boats-and-harbors.com portation Company, Port of Waterford, NY hull as new, 15 hours on boat, fresh water. www.americanworkboat.com www.nysmarinehighway.com Ship by canal. $9,500. (989) 295-7927 GULF OF MEXICO federal shrimp moratori- Fabricated products. Dredges, dead ships & um, $12,500. Leave message @ (361) 655- contractors equipment. Project cargo. We MISS KATHIE. 40' 8" x 13' 5" x 4' 1", Ex CG 2113. can tow your equipment between the East 35' BERTRAM SPORT FISH Twin 3208. Set boat, HP: 680, yr. blt.: '78, GT: 15 GRT, Coast & Great Lakes via the NYS Canal up for offshore fishing. Too much to list. Cummins 909's rblt. 2013, eng. gen.: (2) PERMITS WANTED System. Quotes Rob (518) 365-3305 $55,000 (203) 269-0619 24V alts. on eng. $225,000.00. Location: ★ [email protected] Staten Island, NY. Call office for additional See display ad on back page information: 36' LCVP 1965 FG 671. $5,000. (415) 257- 1-888-MR-BARGE, (617) 984-0022 LOOKING TO LEASE your scallop quota? CONTINUED ON PAGE 26 3898 [email protected] Call Pat (732) 854-9731. BOATS & HARBORS Crossville, TN -- (931) 484-6100 Fax: (931) 456-2337 TELL ‘EM YOU SAW IT IN BOATS & HARBORS SECOND AUGUST ISSUE 2016 - PAGE 23 Landing Craft Available for Charter PILOT HOUSES • Custom Built (2) LCM-8 - 74’ x 21’ x 4’ • No Minimum Qty BOATS FOR SALE Capacity 50 Tons • Carbon • Stainless (1) LCM-6, 56’ x 14’ x 3.5’ • Aluminum FROM THE MARINE DIVISION OF CAT FINANCIAL Capacity 25 Tons Est. 1992 All Equipped w/ Hydraulic Cranes Lake Superior Cabs, Inc. DAVE ALLAN • (207) 882-5400 800-328-1823 Check out the list at www.lakesuperiorcabs.com www.cat.com/boats4sale Scully’s Customized Boats Upto60’U.S.C.G.CertifiedVessels Financing is available worldwide for 2496V all types of commercial applications, 36’ Inland Supply including fishing vessels.
We provide terms, competitive rates and repayment plans as unique
2684DV Survey as each of our customers. 3296DV
For additional information or to obtain an application: e-mail: [email protected] 28 x 8 Utility Barge 2284V phone: 615-341-8258 fax: 615-341-8588
Various Sizes of Stock Boats Available Phone: 1-866-238-8353 • Fax: 1-985-384-5146 1015 Stephensville Road • Morgan City, LA 70380 Email: [email protected] Caterpillar Financial Services Corporation www.scullyboats.com 2120 West End Avenue | Nashville, Tennessee 37203 Available On GSA Contract
Phone: 504-367-5710 Fax: 504-367-5733 Vessels, Barges, & Cranes For Sale
20' x 8' x 4' Truck-Able Push 32' x 40' x 4' Sectional Spud Boat, (1) GM 471, Flanking Barge and Crane. Rudder, Keel Cooled.
Dry Dock 220' x 70' x 6', Capacity 2800 Tons, New Shugart Compatible Reported to be in excellent Sectional Barges. Call today working condition. for a quote, and lead time.
(30) Crewboats 22’ to 150’...... Starting at $18,000 (110) Inland and Ocean Deck Barges 30’ to 400’...... Starting at $15,000 (31) Spud Barges 40’ to 250’...... Starting at $22,000 (45) Inland & Ocean Hopper Barges 175’ to 600’...... Starting at $45,000 (7) Landing Crafts 40’ to 250’...... Starting at $22,000 (6) Travel Lifts 25 ton & Up...... Starting at $25,000 (29) Utility / Supply Vessels...... Starting at $95,000 (65) Pushboats 200hp & Up...... Starting at $25,000 (70) Model Bow Tugboats 200hp & Up...... Starting at $65,000 New & Used Truckable Pushboats & Sectional Barges Used Cranes and Draglines OVER 600 ITEMS LISTED ON OUR WEBSITE WWW.TMT-LLC.COM See Us on the WEB at www.boats-and-harbors.com BOATS & HARBORS PAGE 24 - SECOND AUGUST ISSUE 2016 WANT VALUE FOR YOUR ADVERTISING DOLLAR?
ALL EQUIPMENT FOR SALE OR LEASE UPON AAVAVAILABILITY
DIVE EQUIPMENT AVAILABLE FOR LEASE
FRANKIE STEVENSON, (757) 431-7217 [email protected] FOR FULL SPECS, CUT SHEETS AND PRICING CHECK OUT: PRECONMARINE.COM/EQUIPMENT
HERB JOHNSON, (757) 431-7205 [email protected] ALL EQUIPMENT³FOR SALE OR LEASE UPON AAVVAILABILITY BOATS & HARBORS Crossville, TN -- (931) 484-6100 Fax: (931) 456-2337 TELL ‘EM YOU SAW IT IN BOATS & HARBORS SECOND AUGUST ISSUE 2016 - PAGE 25 HHH FOR SALE HHH LBT PRIME 24” Pile Cutter
96 HP Isuzu Power Pack 310 Hours • Ready To Work $75,000.00 Contact: Ron Canady (228) 233-9342 • [email protected]
90 T DrydockPAT ProtoEN TypeT FORWork SA onL yourE boat Patent #9266590 24 Hrs a Day Rain, Sleet, Etc European Patent Coming Dye Drydock Unique Marine Invention!
This dry dock design is made up of several small FOR RENT tanks allowing simple assembly with light weight equipment. All components of the dry dock’s all- steel tanks, framing and hatches are covered both inside and out with two coats of epoxy paint. FLEXIFLOAT JACK-UP BARGE Components are interchangeable making the easy to manufacture and “fool-proof” to assemble - Truckable, Maximum 100 Ton Crane and operate. The uniqueness of the dry dock is No Contamination that it is small enough to ship on a standard flat- Meets All TUGS bed truck and off loaded on a waterway with a DEQ Standards small crane. IT’S FAST - A 90 ton drydock can be All Pollutants HIGH SPEED CREW BOAT assembled with 2 to 3 men in less than a week are contained within the Unit! and a 30 ton can literally be assembled overnight. CRANES Another exciting feature is that the dock requires much less water depth than conventional dry OTHER MISC. EQUIPMENT docks. The results are that the dry dock can be manuactured with easily obtainable components and requires no specialized training for labor. Contact Stan Andrie At: (231) 332-9227 Or [email protected] Simple Construction www.andrietg.com Assembly - Operation For More Information Contact Ken Dye CLOSING DATES • THIRD AUGUST ISSUE Ofc: (503) 543-3939 Cell: (503) 709-5552 (To be mailed August 19th) Email: FOR DISPLAY FOR CLASSIFIED [email protected] August 16th August 18th (9:00 A.M. C.S.T) (1:00 P.M. C.S.T) 90 Passenger Dinner Party Boat 65' (74' Overall)
WORLD WAR 2 LCI-713 SENDS $.O.$. - PORTLAND, OR – The nonprofit Amphibious Forces Memorial Museum (AFMM) has broadcast a financial “Save Our Ship” to help preserve LCI-713, the only Amphibious Landing Craft Infantry still afloat and looking as it did in World War II. LCIs were at D-Day on June 6, 1944. LCI gunboats blasted Japanese gun emplacements at Iwo Jima before the Allied invasion of February 1945. Since 2005 LCI-713’s volunteer crew has restored the ship to almost the way it looked – above the waterline. The hull has never been out of water since 1944 and is worn very thin. AFMM owns enough 5/16th steel plate to replace or re-plate the hull. Although LCI-713 is moored at Portland’s Swan Island lagoon, near Vigor Marine Services, AFMM 1995 Navigator lacks the means and money to put the 158 x 23-foot ship into dry dock. According to AFMM pres- ident Rick Holmes, “We need a large barge in Portland, onto which the ship can be lifted, where This boat is in excellent shape inside and out. Many upgrades, just had all Coast Guard repairs can be made as time and our resources permit, and at far less cost.” Holmes is hopeful a inspections and recent survey. She is ready for service nightclub atmosphere, and bar top marine services company will donate the rental of a 200 x 40-foot barge for up to a year. Such a deck and lower deck has buffet bar inside with tables & chairs with A/C. barge, Holmes notes, might be considered a “boat,” and thus, under IRS rules, could qualify the $525,000 owner for a tax-deductible contribution to AFMM, a 501c3 qualified nonprofit organization. LCI-713 is open for visiting on Saturdays only from 1000 to 1600. Contact AFMM President Rick Holmes Jim Richards (713) 419-1553 prior to visiting. Info: www.amphibiousforces.org and Facebook.com/lci713 SURPLUS EQUIPMENT FOR SALE
4 Tugs / Pushboats • 2 Crewboats 1 Long Reach Kobelco Excavator 1 Linkbelt 60 Ton Lattice Crawler Crane Contact: Jay Bryant • (325) 650-5024 See Us on the WEB at www.boats-and-harbors.com BOATS & HARBORS PAGE 26 - SECOND AUGUST ISSUE 2016 WANTW VALUE FOR YOUR ADVERTISING DOLLAR? Maximize Your Profit - Minimize Your Cost!! Experience TheThe SellingSelling PowerPower ofof TheThe Boats & Harbors Classifieds Yellow Sheet! PlacePlace Your Ad (931) 484-8708 OR Email: [email protected] • Fax: (931) 456-2337 • Submit Online: www.boats-and-harbors.com BARGES FOR SALE AMPHIBIOUS EXCAVATORS ★ ★ (2) 3116TA CAT 300 HP rebuilt. (2) 3208TA DETROIT DIESEL 3-71 w/ Lima 30 w gen- WANTED/FOR SALE 355 HP with gears. Call Mike Cobb @ ey erator, running takeout, $3,000. Duet Power (888) 463-0099. BF4M2011 engine w/ 38 w generator, run- (2) 195' x 35' x 9'6" DOUBLE RA E deck [email protected] ning takeout, 2 available, $3,000 each. Yan- barges for sale. 1969 vintage, new 3/8 WANTED, AVAILABLE Marsh Buggies / mar 3TNC78E-G1 engine w/ 8 w generat- knuckles. Located 135 Tenn. River. (731) Amphibious Excavators. We want to know or, running takeout, $750. Call Dan at (608) 549-4880 about owners & users of these units. We will (2) CAT 3508, 1,050 HP. Call for details. 519-5337 or pay finders / fee rewards. Percy Ransome (978) 767-3489 Email at: dschimanski@ fbrennan.com (888) 988-5747, (856) 797-6999. 110' x 34' 1943 STEEL Ex-Navy. Very good www.longreachhighreach.com overall two-story electronics repair. Always [email protected] DETROIT DIESEL 671 with 2 to 1 Twin Disc clean, in & out. $249,500. Seattle. (206) (2) DETROIT 16V92 NATURAL, running 509 transmission, heat ex-changer cooled, 225-3360 ★ DREDGES FOR SALE takeouts, price reduced to $10,000 each. good takeout, will test run, $6,000.00, Flor- Details: www.PacificMarine.org Call (912) 232-7342 or ida. (321) 536-4893, (321) 383-8773 E-mail: david @pacificmarine.org Email: [email protected] 14" HYDRAULIC DREDGE, 800' float line, DETROIT DIESEL ENGINES and Parts for twin engine boat, Derrick barge, spud barge 4 HOLLOW SPUD BARGES, two 10' x 20', sale. DD12-92DDEC engine takeouts for two 8' x 20'. Built Dulac Shipyard 2008, loca- with 60 ton crane, $900,000. Contact (504) (2) CAT 3512, 1,400 HP. Call for details. sale also many cores, spare rebuilt parts, 236-3999. tion Lake Toxaway, NC $22,500 (828) 966- (978) 767-3489 heads injectors, pumps, heat exchange. 9223 (508) 776-8435 [email protected] ATCHAFALAYA. TRAILING SUCTION hop- per dredge. Built 1980 Twin City Shipyard, Inc., ON 63005; IMO 7914248, class: ABS YOU MAY HAVE THE MARINE item some- CRANE BARGE, 110' x 26' x 4' with 13' x (Valid thru Feb 2016), International Load one is looking for! List it in Boats & Harbors CATERPILLAR 3406E 475 hp. Call (831) 21' ramp. 3 spuds, Link-Belt LS 68W, nice line (Valid thru Feb 2016). 1300 cu. yd. hop- today! Call (931) 484-6100 or place your ad 633-1345 lead, welder, turn-key marine construction, per, bottom dump and bow discharge capa- online at Email: [email protected] working daily, ingston, TN. All tools in- city, main eng.: 2x D398 Cats (1720 hp) cluded. $45 . (865) 566-1265 driving 2x Niigata P-D8 drives, 700 hp www.boats-and-harbors.com dredge motor; 64" suction head, 22' suction ONE (1) NEW CATERPILLAR C9 575 MHP pipe, 20" discharge pipe, max effective tier 2 compliant engines, $36,500. Call RUST AND OBSOLESCENCE Steal Away dredging depth approximately 35', 25,000 (2) DETROIT V1271TI, 650 HP with F Ring Power: Lyndon Schultz (904) 494- the value of equipment. Sell or trade that gallons fuel, 7,500 gallons potable water. gears for sale. Also including newer Math- 1278 or Victor Flores (904) 494-7311. which is no longer needed. Advertise it now $5M. Call office for additional information ers electronic controls. One overhauled April with us. 1-888-MR-BARGE, (617) 984-0022 2010, and one this year. Running engines in [email protected] passenger vessel were ust removed in CATERPILLAR D334 with Twin Disc MG509 December. Price reduced $27 for 2:1. Call (831) 633-1345 360' x 56' BARGE, bow thruster, no current DREDGES FOR SALE, rent, lease, pur- everything. (727) 410-1000 Email: [email protected] ABS, perfect for southern waters. Always in chase. New, used, rebuilt. We can build fresh water. Located in MI. (715) 923-1476 to meet your needs or we can sell you [email protected] one you can rebuild. From the smallest (2) VOLVO D12's, engines still in boat and CATERPILLAR 3304 DIT, marine genset, to the largest, call us first! We will save running. Electronic engines, two e-panels 105 kW. Call (831) 633-1345 Email: [email protected] SECTIONAL BARGES Built. Any truckable you money! If you need to sell a dredge, with wire harness for each engine. Call si e. Portable pushboats. Madison Boat and call us, we are also buyers. Western Sarah (856) 300-1013 or Barge, Madison Indiana, (812) 265-6255. Dredge & Supply Co. (936) 273-3228 Email: www.westerndredge.com [email protected] TEN (10) NEW CATERPILLAR C7 320 www.madisonboatandbarge.com MHP non tier compliant engines, for ex- WE SELL USED / Refurbished Dredges! port only, $28,500 each. Call Ring Power: SELF PROPELLED BARGE, Twin, low Dredge Central, LLC is your best source for Lyndon Schultz (904) 494-1278 or Victor (3) V1271 N/A W514C 2:1 Twin Disc RTO. Flores (904) 494-7311. hour, 8V71's, et drives, 90 x 22. Ask used cutter-suction dredges. Our team has (1) V1271 N/A S/OH "0" hours. (2) 514B 4.5. $110 . Call Dale (252) 422-2222 more experience refurbishing and rebuild- (1) 514B 5.16. (2) V2171 N/A core. (2) Hyd [email protected] ing used dredges than anyone else in the in- Pw unit 3-71. (1) 855 Hyd and turbo rebuilt. dustry. We have dredges ranging in si e CATERPILLAR D330C marine genset 55 (1) 671w/4.5 Twin Disc RTO. Ph. (504) 657- kW. Call (831) 633-1345 from 8" to 14" or 16" in our inventory right 9015 or (504) 912-1698 SPUD BARGE 140 x 80 x 15' Ex-Navy now, with more on the way. And call us first Email: [email protected] barge. Located in Staten Island, NY. Call for good used pumps, boosters, push boats Bobby D at Sterling Equipment (617) 984- and dredge parts of all kinds. We're buying 0022 for further details. Barge is ballasted dredges, too! Call Don ing, ames Morris, (7) DD12-71TI RTO's, $2,500 each $3,000 KEY POWER SYSTEMS DDC/MTU, CAT, with concrete counterweight and is suitable Larry Fleeman, Bobby Prince, or Rick ing. w/stand. (1) 2-71 20kw Genset. $750. (1) 3- Cummins. Surplus new, used, rebuilt. for a large crane. Dredge Central, LLC - Goodlettsville, TN. 71 Genset $1,000. (1) 4-71 Genset $1,000. Many models avail. Your source for all (615) 859-3733 (1) rblt Delco generator 40kw $500. Call your engine needs. Many So. Fla. yacht ★ BARGES FOR CHARTER www.DredgeCentral.com Tom @ (805) 445-9456. repower removals. ZF Twin Disc & Allis- on gears avail. Contact Mike Cobb TL ★ DREDGES FOR RENT Free (888) 463-0099. NEW 10 & 30 double-skin tank barges. DETROIT DIESEL 4.71 genset. Call (831) E-mail: [email protected] Central Boat Rentals, Inc. (985) 384-8200 633-1345 keypowersystems.us www.centralboat.com 10" DREDGE FOR LEASE. 28' digging Email: [email protected] depth. Contact: (207) 233-9268 LUGGER 6140 700 HP, disassembled and SPUD, CRANE, HOPPER, material, car- ★ DREDGE EQUIPMENT ready to rebuild, must sell. Reduced floats, sectionals, oceangoing and inland. FOR SALE 2 DETROIT V1292 TI 1100 HP - model $7,500.00. (305) 393-1415 Services include floating crane, Brooklyn NY 81227800 w/ Twin Disc - model DD232EV, loading berth, transportation and pro ect car- 1.75, includes gear & trolling box actuators / goes, marine construction support, etc. McELROY ROLLING FUSION machine 412 wire harness, repower removals, approx. CATERPILLAR 3208T with F transmission Equipment located throughout the east (for Fusion dredge pipes), year 2000, price 2000 hr. on rebuilds. May seperate gear 220A, 2.5:1. Call (831) 633-1345 coast. Call or email us for a free quote: $17,500. (305) 965-8852 boxes. $28,000 / pair. Call (772) 475-4904. Email: [email protected] Hughes Marine Firms. (800) 357-7744 or Email: [email protected] [email protected] www.hughesmarine.com 2 DEUT V16 TBD 616 Ser# 2202970, NEW OHN DEERE Engine for sale. USED 12” HDPE SDR 17 Pipe, approx. 9,000 2202587. Running take outs for, no controls, 6135AFM75, 500 HP, HE cooled, 12 volt, ★ BARGE FOR SALE Lf. Used 8” HDPE SDR 17 pipe, approx. good for parts. US$ 5,000.00 each. Avail- 13.5 L., 2012 yr., $41,901. (562) 688-2116 OR CHARTER 2,000 Lf. Call For Pricing. (207) 233-9268 abe Saint Maarten, Dutch West Indies. Call [email protected]