DOCSLIB.ORG

Google IP Address Ranges

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Google IP Address Ranges Configuring a ZixGateway to work with Google Apps as the mail server. At the time of writing this documentation the current list of Google mail server IP addresses is: 216.239.32.0/19,64.233.160.0/19,66.249.80.0/20,72.14.192.0/18209.85.128.0/17,66.102.0.0/2 0 74.125.0.0/16,64.18.0.0/20, 207.126.144.0/20, 173.194.0.0/16 These will need to be put in the (Networks Served by Mail Relay) field on the Configure Server tab. This list can change at any time as Google adds additional servers. To obtain the current list of Google mail servers follow the instruction on their support page: http://support.google.com/a/bin/answer.py?hl=en&answer=60764 In case that page moves here is a copy of it: Google IP address ranges When you are configuring email handling for your domain, you might need to know the IP addresses of the Google Apps mail servers, to help prevent Google messages from being marked as spam. Google maintains a global infrastructure, which grows dynamically to accommodate increasing demand. As a result, Google Apps mail servers use a large range of IP addresses, and the addresses often change. The most effective means of finding the current range of Google IP addresses is to query Google's SPF record. To create an SPF record for your domain, you can simply have the record refer to the Google SPF record for the current list of IP addresses: v=spf1 include:_spf.google.com ~all With this method, your domain automatically inherits changes to the Google IP addresses as they happen. When you need the literal IP addresses for Google Apps mail servers, use one of the tools available on the Internet to look up the SPF records for the domains google.com and _netblocks.google.com. These records list the current range of addresses. The IP ranges of Google services can be found at any given time by running the following command: nslookup -q=TXT _netblocks.google.com 8.8.8.8 If you activate the Postini features in Google Apps for Business, you may also need the IP addresses for the Postini servers. The customer will need to make an internal MX record and then point that to a list of the Google mail servers. A current list of these mail servers can be found here: http://support.google.com/a/bin/answer.py?hl=en&answer=33915 Priority Mail Server 1 ASPMX.L.GOOGLE.COM. 5 ALT1.ASPMX.L.GOOGLE.COM. 5 ALT2.ASPMX.L.GOOGLE.COM. 10 ASPMX2.GOOGLEMAIL.COM. 10 ASPMX3.GOOGLEMAIL.COM. When loading the Domain Encryption key on the Configure Server tab input the customer’s internal MX record in the (Mail Host) field. This will allow the ZixGateway to deliver inbound e-mail that has been decrypted to any of the Google Apps mail servers. Google Apps also needs to be configured to use the ZixGateway as an inbound and outbound relay. Outbound mail gateway: http://support.google.com/a/bin/answer.py?hl=en&answer=178333 Google Apps Outbound mail gateway Editions supported: Outbound gateways are available in Google Apps for Business and Education. Compare editions now An outbound mail gateway is a server through which all mail sent from your domain passes. The gateway typically processes the mail in some way — such as archiving it or filtering out spam — before delivering the mail. The Postini servers are an example of an outbound mail gateway: they filter (and possibly archive) outgoing mail before delivering it. When you use an outbound mail gateway, the Google Apps mail servers pass all outgoing mail from your domain to the gateway server. You configure the gateway server to accept a stream of mail from the Google Apps mail servers. You may also need to update your DKIM configuration or the Sender Policy Framework (SPF) record for your domain. To configure an outbound mail gateway: 1. Sign in to your Google Apps administrator control panel. 2. From the menu at the top of the page, click the Settings tab. 3. From the left-navigation menu, click Email. 4. From the Email settings page, click General Settings. 5. In the Organizations section near the top of the page, highlight your domain. 6. Scroll down to the Outbound gateway section. 7. In the Outbound gateway text box, enter the IP address of the outbound mail gateway server. 8. Save your changes. 9. Configure the outbound gateway server to accept and forward email from the Google Apps mail servers. The configuration steps differ depending on the gateway server. For information about the IP addresses of the Google Apps mail servers, see Google IP address ranges. Then for Inbound mail gateway: http://support.google.com/a/bin/answer.py?hl=en&answer=60730&topic=2683866&ctx=topic Google Apps Inbound mail gateway Editions supported: Inbound gateways are available in Google Apps for Business and Education. Compare editions now An inbound mail gateway is a server through which all incoming mail for your domain passes. The gateway typically processes the mail in some way — such as archiving it or filtering out spam — then passes the mail on to the mail server that delivers the messages to the recipients. The Postini servers are an example of an inbound mail gateway: they filter (and possibly archive) incoming mail before passing it on to the Google Apps mail servers. When you use an inbound mail gateway, the MX records for your domain point to the inbound mail gateway server. You configure the gateway server to pass the incoming mail on to the Google Apps mail servers, and configure the Google Apps mail servers to accept a stream of incoming mail from the gateway server. To configure an inbound mail gateway: 1. Update your domain's MX records so that the highest priority record refers to the inbound mail gateway server. See Creating MX records for detailed instructions. 2. Configure the inbound mail gateway server to deliver mail to the Google Apps mail servers. The configuration steps differ depending on the gateway server. 3. Sign in to your Google Apps administrator control panel. 4. From the menu at the top of the page, select the Settings tab. 5. From the left-navigation menu, click Email. 6. From the Email settings page, click General Settings. 7. In the Organizations section at the top of the page, highlight your domain. 8. In the Inbound gateway box, enter the IP address of the inbound mail gateway server. If you have more than one gateway server, enter an IP range in CIDR notation or separate each IP address with a comma. If you are using the Postini Services, include the addresses of the Postini servers: 64.18.0.0/20,207.126.144.0/20,74.125.148.0/22,74.125.244.0/22 9. Select the check box Only let my users receive email from the email gateways listed above. This setting ensures that all incoming email comes through the inbound gateway server and is therefore properly filtered or archived. The Google Apps mail servers will reject incoming mail from any other mail server. 10. Click Save changes at the bottom of the Email settings page. 11. Verify that incoming mail is properly delivered. Once your MX record changes from step 1 have taken effect (that is, after the previous MX record's TTL has expired), send an email message to a user in your domain. Confirm that (a) the inbound gateway server processes it and (b) the user receives the message in his or her inbox. .
Load more

Recommended publications
  • PSH-12180FR 12 Volt 21.0 AH
    PSH-12180FR 12 Volt 21.0 AH Features • Absorbent Glass Mat (AGM) technology for superior performance • Designedspecificallyforhigh-ratedischarge(UPS) applications • 80 Watts/cell for 15 min. of constant power • Ruggedplasticcaseandcover,flameretardant toUL94V-0 • Approved for transport by air. D.O.T., I.A.T.A., F.A.A. and C.A.B.certified • U.L.recognizedunderfilenumberMH20845 Terminals (mm) Performance Specifications 3.4 Nominal Voltage ........................................................................ 12 volts (6 cells) • F2:Quickdisconnect 6.35 Nominal Capacity AMP,INC.Fastontabs, 20-hr. (1.05A to 10.50 volts) ........................................................ 21.00AH 0.250” x 0.032” 7.95 0.8 • NB2:Tinplatedbrass 10-hr. (2A to 10.50 volts) .............................................................20.00AH post with nut & bolt 14 2 5-hr. (3.7A to 10.20 volts) ..........................................................18.50AH connectors 4.5 6 12 1-hr. (13Ato9.00volts) .............................................................13.00AH 15-min.(40Ato9.00volts) ............................................................... 10.00AH Physical Dimensions: in (mm) Approximate Weight ........................................................ 13.20lbs.(5.99kg) Energy Density (20-hr. rate) ............................... 1.77 W-h/in3 (107.86 W-h/l) Specific Energy (20-hr. rate) ............................. 19.09W-h/lb(42.09W-h/kg) W Internal Resistance (approx.) ...................................................... 12 milliohms Max
    [Show full text]
  • Interstate Commerce Commission Washington
    INTERSTATE COMMERCE COMMISSION WASHINGTON REPORT NO. 3374 PACIFIC ELECTRIC RAILWAY COMPANY IN BE ACCIDENT AT LOS ANGELES, CALIF., ON OCTOBER 10, 1950 - 2 - Report No. 3374 SUMMARY Date: October 10, 1950 Railroad: Pacific Electric Lo cation: Los Angeles, Calif. Kind of accident: Rear-end collision Trains involved; Freight Passenger Train numbers: Extra 1611 North 2113 Engine numbers: Electric locomo­ tive 1611 Consists: 2 muitiple-uelt 10 cars, caboose passenger cars Estimated speeds: 10 m. p h, Standing ft Operation: Timetable and operating rules Tracks: Four; tangent; ] percent descending grade northward Weather: Dense fog Time: 6:11 a. m. Casualties: 50 injured Cause: Failure properly to control speed of the following train in accordance with flagman's instructions - 3 - INTERSTATE COMMERCE COMMISSION REPORT NO, 3374 IN THE MATTER OF MAKING ACCIDENT INVESTIGATION REPORTS UNDER THE ACCIDENT REPORTS ACT OF MAY 6, 1910. PACIFIC ELECTRIC RAILWAY COMPANY January 5, 1951 Accident at Los Angeles, Calif., on October 10, 1950, caused by failure properly to control the speed of the following train in accordance with flagman's instructions. 1 REPORT OF THE COMMISSION PATTERSON, Commissioner: On October 10, 1950, there was a rear-end collision between a freight train and a passenger train on the Pacific Electric Railway at Los Angeles, Calif., which resulted in the injury of 48 passengers and 2 employees. This accident was investigated in conjunction with a representative of the Railroad Commission of the State of California. 1 Under authority of section 17 (2) of the Interstate Com­ merce Act the above-entitled proceeding was referred by the Commission to Commissioner Patterson for consideration and disposition.
    [Show full text]
  • Minutes of Claremore Public Works Authority Meeting Council Chambers, City Hall, 104 S
    MINUTES OF CLAREMORE PUBLIC WORKS AUTHORITY MEETING COUNCIL CHAMBERS, CITY HALL, 104 S. MUSKOGEE, CLAREMORE, OKLAHOMA MARCH 03, 2008 CALL TO ORDER Meeting called to order by Mayor Brant Shallenburger at 6:00 P.M. ROLL CALL Nan Pope called roll. The following were: Present: Brant Shallenburger, Buddy Robertson, Tony Mullenger, Flo Guthrie, Mick Webber, Terry Chase, Tom Lehman, Paula Watson Absent: Don Myers Staff Present: City Manager Troy Powell, Nan Pope, Serena Kauk, Matt Mueller, Randy Elliott, Cassie Sowers, Phil Stowell, Steve Lett, Daryl Golbek, Joe Kays, Gene Edwards, Tim Miller, Tamryn Cluck, Mark Dowler Pledge of Allegiance by all. Invocation by James Graham, Verdigris United Methodist Church. ACCEPTANCE OF AGENDA Motion by Mullenger, second by Lehman that the agenda for the regular CPWA meeting of March 03, 2008, be approved as written. 8 yes, Mullenger, Lehman, Robertson, Guthrie, Shallenburger, Webber, Chase, Watson. ITEMS UNFORESEEN AT THE TIME AGENDA WAS POSTED None CALL TO THE PUBLIC None CURRENT BUSINESS Motion by Mullenger, second by Lehman to approve the following consent items: (a) Minutes of Claremore Public Works Authority meeting on February 18, 2008, as printed. (b) All claims as printed. (c) Approve budget supplement for upgrading the electric distribution system and adding an additional Substation for the new Oklahoma Plaza Development - $586,985 - Leasehold improvements to new project number assignment. (Serena Kauk) (d) Approve budget supplement for purchase of an additional concrete control house for new Substation #5 for Oklahoma Plaza Development - $93,946 - Leasehold improvements to new project number assignment. (Serena Kauk) (e) Approve budget supplement for electrical engineering contract with Ledbetter, Corner and Associates for engineering design phase for Substation #5 - Oklahoma Plaza Development - $198,488 - Leasehold improvements to new project number assignment.
    [Show full text]
  • Volunteer Pilot Handbook
    VOLUNTEER PILOT HANDBOOK As an AFC Pilot YOU are “Giving Hope Wings” to children and adults in need. The Mission of Angel Flight Central “Serving people in need by arranging charitable flights for access to health care and for other humanitarian purposes.” May 2012 INSPIRATION ! Volunteer pilots have said that the “opportunity to give back to those less fortunate”, “the joy of helping others” and the “reward of flying for a worthy cause” are some of the reasons why they volunteer to fly on behalf of Angel Flight Central. As you meet passengers, pilots and friends of AFC; be sure to capture your own stories and share them with us. Here’s some inspiration to get you started! Volunteer Pilots Give Hope & Help to Families AFC Serves Disaster Response “Mark would not have seen his daughter ”I just thought everybody forgot about us. th get married, celebrated our 11 wedding Then suddenly there was a plane and a pilot th anniversary, or celebrated his 49 flying us here to be with my mom.” birthday without your service. I will never forget all of the wonderful pilots Hurricane Katrina Survivor, AFC Passenger Danielle and flights we made with you. Your pilots and ground angels really are Angels! Thank you, thank you so much.” Marilyn, wife of AFC Passenger Volunteer Pilots Give their Time, Talent & Treasure Pilots help Special Needs Campers “A diagnosis of a rare form of liver with Flights cancer rocked our world… when I began to feel I no longer could continue “AFC is an outstanding organization to to make my trips to the Mayo Clinic work with and the level of their God sent angel flight.
    [Show full text]
  • VOLT Owner's Manual
    19_CHEV_VOLT_COV_en_US_84044803A_2018JUN22.ai 1 6/14/2018 10:17:33 AM 2019 VOLT C M Y CM MY CY CMY VOLT K Owner’s Manual 84044803 A Chevrolet VOLT Owner Manual (GMNA-Localizing-U.S./Canada/Mexico- 12163007) - 2019 - crc - 6/11/18 Contents Introduction . 2 In Brief . 5 Keys, Doors, and Windows . 30 Seats and Restraints . 52 Storage . 99 Instruments and Controls . 102 Lighting . 143 Infotainment System . 150 Climate Controls . 151 Driving and Operating . 158 Vehicle Care . 236 Service and Maintenance . 321 Technical Data . 334 Customer Information . 337 Reporting Safety Defects . 348 OnStar . 351 Connected Services . 359 Index . 363 Chevrolet VOLT Owner Manual (GMNA-Localizing-U.S./Canada/Mexico- 12163007) - 2019 - crc - 6/11/18 2 Introduction Introduction This manual describes features that Helm, Incorporated may or may not be on the vehicle Attention: Customer Service because of optional equipment that 47911 Halyard Drive was not purchased on the vehicle, Plymouth, MI 48170 model variants, country USA specifications, features/applications that may not be available in your Using this Manual region, or changes subsequent to To quickly locate information about the printing of this owner’s manual. the vehicle, use the Index in the The names, logos, emblems, Refer to the purchase back of the manual. It is an slogans, vehicle model names, and documentation relating to your alphabetical list of what is in the vehicle body designs appearing in specific vehicle to confirm the manual and the page number where this manual including, but not limited features. it can be found. to, GM, the GM logo, CHEVROLET, the CHEVROLET Emblem, VOLT, Keep this manual in the vehicle for and the VOLT logo are trademarks quick reference.
    [Show full text]
  • 2016 Chevrolet Volt Battery System
    2016 CHEVROLET VOLT BATTERY SYSTEM 2016 CHEVROLET VOLT BATTERY SYSTEM KEY WINS GEN 1 GEN 2 ■ Revolutionary liquid cooled ■ Mass reduction of 13 battery pack kg (196 kg) • Foundation for battery life performance ■ Useable capacity ■ World class Quality, Reliability, increase of 25% Durability and Capacity Retention (11.2kWh to 14kWh) • GM study of more than 300 ■ Power increase of 9% Volts in service in CA since launch in 2011: Approximately ■ Modular system 15 percent of owners achieve architecture more than 40 miles of EV range ■ All climate operation GEN 1 VOLT Cell Chemistry NMC-LMO Pouch BATTERY PACK Cell Configuration 96S 3P (288 cells) Discharge Power (10 s) 110 kW Charge Power (10 sec) 60 kW Usable Energy 10.2 – 11.2 kWh Total Energy 16.0 – 17.1 kWh Energy Density-Volume 118 Wh/l Energy Density-Mass 87 Wh/kg Nominal Voltage 360 V Mass 196 kg Pack Volume 145 L Cooling System Direct liquid fin # of Modules 9 Module Sizes 18 & 36 Cells GEN 2 VOLT Cell Chemistry NMC-LMO Pouch BATTERY PACK Cell Configuration 96S 2P (192 cells) Discharge Power (10s) 120 kW (+9%) Charge Power (10s) 60 kW Usable Energy 14.0 kWh (+25%) Total Energy 18.4 kWh (+8%) Energy Density-Volume 119 Wh/l (+1%) Energy Density-Mass 101 Wh/kg (+16%) Nominal Voltage 360 V Peak Voltage 395 V Peak Current 430 A Mass 183 kg Pack Volume 154 L Cooling System Direct liquid fin # of Modules 7 Module Sizes 24 & 32 Cells COMPARISONS GEN1 VOLT BATTERY PACK GEN2 VOLT BATTERY PACK Cell Chemistry NMC-LMO Pouch NMC-LMO Pouch Cell Configuration 96S 3P (288 cells) 96S 2P (192 cells) Discharge
    [Show full text]
  • Introduction to Transmission Lines
    INTRODUCTION TO TRANSMISSION LINES DR. FARID FARAHMAND FALL 2012 http://www.empowermentresources.com/stop_cointelpro/electromagnetic_warfare.htm RF Design ¨ In RF circuits RF energy has to be transported ¤ Transmission lines ¤ Connectors ¨ As we transport energy energy gets lost ¤ Resistance of the wire à lossy cable ¤ Radiation (the energy radiates out of the wire à the wire is acting as an antenna We look at transmission lines and their characteristics Transmission Lines A transmission line connects a generator to a load – a two port network Transmission lines include (physical construction): • Two parallel wires • Coaxial cable • Microstrip line • Optical fiber • Waveguide (very high frequencies, very low loss, expensive) • etc. Types of Transmission Modes TEM (Transverse Electromagnetic): Electric and magnetic fields are orthogonal to one another, and both are orthogonal to direction of propagation Example of TEM Mode Electric Field E is radial Magnetic Field H is azimuthal Propagation is into the page Examples of Connectors Connectors include (physical construction): BNC UHF Type N Etc. Connectors and TLs must match! Transmission Line Effects Delayed by l/c At t = 0, and for f = 1 kHz , if: (1) l = 5 cm: (2) But if l = 20 km: Properties of Materials (constructive parameters) Remember: Homogenous medium is medium with constant properties ¨ Electric Permittivity ε (F/m) ¤ The higher it is, less E is induced, lower polarization ¤ For air: 8.85xE-12 F/m; ε = εo * εr ¨ Magnetic Permeability µ (H/m) Relative permittivity and permeability
    [Show full text]
  • Transmission Line General Requirements Including Typical Overhead Line Structures
    Transmission Line General Requirements Including Typical Overhead Line Structures Document Number: 1-03-FR-09 VERSION 1.0 June 2018 This functional requirements document is in line with the organisation's 1-03-ACS- 01 Transmission Line Conductors, 1-03-ACS-02 Transmission Line Insulators, 1-03- ACS-03 Transmission Line Earthing, 1-03-ACS-04 Pole Structures and Foundations, 1-03-ACS-05 Lattice Structures and Foundations Asset Class Strategies. Intellectual property rights and disclaimer This document is published in accordance with the requirements of Chapter 5 of the National Electricity Rules (NER). It is a functional requirement document only and is not intended to contain any comprehensive or project specific designs, specifications or other information. Whilst care has been taken to ensure that the contents of this document are accurate, ElectraNet Pty Limited (ElectraNet) does not represent or warrant that the information contained in this document is complete, accurate or adequate in any respect. ElectraNet reserves the right to amend this document at any time without notice to any person. The user must carefully examine and check the information contained in this document and carry out its own independent technical and legal assessment and due diligence to ensure that the information in this document is used appropriately and that in doing so, all requirements (including requirements at law) are satisfied. For the avoidance of any doubt, the publication of this document does not limit or detract from the user’s obligations at law, and does not and will not give rise to any claim (including, without limitation, in contract, tort, equity, under statute or otherwise) against ElectraNet or any of its ‘Associates’ (as that term is defined in Corporations Act 2001 (Cth)).
    [Show full text]
  • Los Angeles County Metropolitan Transportation Authority Collection of Metro Red Line Construction Progress Photographs
    http://oac.cdlib.org/findaid/ark:/13030/c8183c6z No online items Finding Aid for the Los Angeles County Metropolitan Transportation Authority Collection of Metro Red Line Construction Progress Photographs Finding aid prepared by Denise Villegas Los Angeles County Metropolitan Transportation Authority Library and Archives © 2013 One Gateway Plaza Mail Stop: 99-15-1 Los Angeles, CA 90012 [email protected] URL: http://www.metro.net/about/library/ 03-DPGTL 1 Language of Material: English Contributing Institution: Los Angeles County Metropolitan Transportation Authority Library and Archives Title: Los Angeles County Metropolitan Transportation Authority Collection of Metro Red Line Construction Progress Photographs Source: Southern California Rapid Transit District Creator: De Leuw, Cather & Company Creator: Dillingham Corporation Creator: Ralph M. Parsons Company Identifier/Call Number: 03-DPGTL Physical Description: 6.34 linear feet, 11 boxes Date (inclusive): 1987-1992 Date (bulk): 1988-1990 Abstract: The Los Angeles County Metropolitan Transportation Authority collection of Metro Red Line construction progress photographs consists of photos, 35mm negatives, contact sheets, proof approval sheets, correspondence, cassette tapes, and video cassette tapes transferred from the construction company to the Southern California Rapid Transit District (SCRTD) and the Rail Construction Corporation by construction company Ralph M. Parsons Corp., Deleuw, Cather & Co. and Dillingham Corporation (PDCD). The material in this collection was created between the years 1987 and 1992 when the first segment of the Red Line was being built. Physical Location: LACMTA Research Library and Archive Biographical / Historical SCRTD was created on August 22, 1964 to serve the urbanized Southern California region, including Los Angeles County, San Bernardino County, Orange County, and Riverside County, replacing LAMTA and ten different private bus companies in the Southern California region.
    [Show full text]
  • Simplex L1000 Standard Template
    STRIKE CAUTION : MARK ACCURATELY - BORE STRAIGHT B TEMPLATE 1 13/16" (46mm) (with passageset) TOP HAND LEFT 1 1/8" (29mm) 1" DIAM. 9/16" 2 HOLES (25mm) (14mm) 1 4 TEMPLATE USEASADRILLING DO NOT / " DIAM. THIS FLAP FOLDS OVER THE EDGE OF THE DOOR (6mm) BE SURE THE FOLD IS EXACTLY ON THE LINE REFERENCE ONLY, NOT TO SCALE TO NOT REFERENCE ONLY, D2-PKG-1799E(b) 0609 D2-PKG-1799E(b) RIGHT HAND HAND RIGHT (with passage set) TEMPLATE B TEMPLATE CALL 800-849-8324 NOTE: Lock will accomodate doors 1 doors accomodate will Lock NOTE: allowances allowances must be made for strike location. proper installed, be to are silencers door When manufacturer to prevent collapsing of door. shall be provided by the hollow metal door to 2 13 13 11/16" /16" /16" (21mm) (21mm) 1 " " / (17mm) " 2 4 4 8 / / / " " (57mm) thick. Suitable reinforcement 1 3 1 1 2 " 2 THIS HOLE (38mm) (38mm) 4 (70mm) (70mm) (54mm) (54mm) / 1" DIAM. 1 FOR PASSAGE (25mm) 1 (32mm) (32mm) MODELS ONLY " 4 / 3 DOOR BEVEL BEVEL DOOR 2 " (70mm) 32 / 13 5 2 HOLES (137mm) 8-32 FHMS LATCH CUTOUT BE SURE THE FOLD IS EXACTLY ON THE LINE 3 / THIS FLAP FOLDS OVER THE EDGE OF THE DOOR 8 " (35mm) " 1 1/8" 3 (29mm) CAUTION 3 OUTSIDE BUT BUT OUTSIDE 2 /4" 2 /4" AND DRILL FROM FROM DRILL AND APPLY TEMPLATE TEMPLATE APPLY (70mm) (70mm) COMPENSATE FOR FOR COMPENSATE 1" (25mm) ANY. IF BEVEL DOOR DIAM. " " " 4 8 / 4 / " / 1 5 3 MARK CENTER MARK CENTER 16 2 1 / (19mm) (19mm) (57mm) (57mm) 9 (41mm) (41mm) OF DOOR OF DOOR 3 THICKNESS (90mm) THICKNESS 5/32" 5 2 1/4" /32" 2 1/4" (57mm) (4mm) (4mm) (57mm) 9 /16" 1 3/4" 1 3/4" (14mm) (44mm) 2 1/8" (44mm) 3 1 3/8" (54mm) DIAM.
    [Show full text]
  • Office of LA County Supervisor Hilda Solis LEGISLATIVE AIDE
    Office of LA County Supervisor Hilda Solis LEGISLATIVE AIDE - Justice Los Angeles County Supervisor Hilda L. Solis’ office has immediate openings for a Legislative Aide. The First District is home to two million residents, across 246 square miles, in diverse communities from unincorporated East Los Angeles and Valinda, MacArthur Park to Eagle Rock, and South Gate to Pomona. The candidate must be community-oriented and have an interest in policy that improves the quality of life for residents of LA County and especially First District constituents. The Legislative Aide will form part of the First District’s Legislative team and will work alongside the Senior Policy Deputies to implement Supervisor Solis’ policy priorities. The Legislative Aide will work at the direction of a Senior Legislative Deputy and collaborate with the district engagement team, county departments, other board of Supervisor’s offices, cities within the district, constituents, community groups and other stakeholders to advance policy initiatives that create opportunity for disadvantaged communities, increase transparency in local government, create jobs, and enhance and safeguard the environment. Policy Areas that will be addressed by the Legislative Aide include: • Juvenile justice; • Jail conditions; • Effective and just policing • Anti-recidivism • Prop 47 & reentry • Criminal justice system reform Duties: • At the direction of the Senior Deputy, Monitor State and Federal policies that could benefit the residents of the First District and the region • At the direction
    [Show full text]
  • Railway Electrification and Railway Productivity: a Study Report
    Transportation Research Record 1029 23 Railway Electrification and Railway Productivity: A Study Report S. R. DITMEYER, J. R. MARTIN, P. E. OLSON, M. F. RISTER, B. A. ROSS, J. J. SCHMIDT, and E. H. SJOKVIST ABSTRACT various aspects of railroad productivity that might be influenced by the adop­ tion of electrified railroad operation are evaluated. Productivity is considered from the viewpoint of motive power, transportation economics, signaling and train control, and railway operations. The results of a productivity study undertaken by a diesel operation solely because of electrification, subcommittee of the TRB Committee on Rail Electrifi­ and then construct hypothetical models of known cation systems are presented. This seven-member railroad operations in North America, incorporating group evaluated various aspects of railroad produc­ the operating concepts gathered from this overseas tivity that might be influenced by the adoption of study. At best, the result is a mental simulation of electrified operation. Primary emphasis has been a railroad operation to which untested principles placed on productivity improvements that might be are applied and for which no opportunity exists to anticipated with electrification of heavy-density validate any part of the so-called model. When the main-line freight railroad operations. model results are evaluated, it is necessary to dis­ Each member of the subcommittee has been involved tinguish carefully between true effects of electri­ in one or more North American main-line railroad fication and consequential effects that are brought electrification studies in the United States or about primarily because a new, unconstrained look is Canada. In addition, each member of the subcommittee taken at the railroad operations.
    [Show full text]