Simplex L1000 Standard Template
Total Page:16
File Type:pdf, Size:1020Kb
STRIKE CAUTION : MARK ACCURATELY - BORE STRAIGHT B TEMPLATE 1 13/16" (46mm) (with passageset) TOP HAND LEFT 1 1/8" (29mm) 1" DIAM. 9/16" 2 HOLES (25mm) (14mm) 1 4 TEMPLATE USEASADRILLING DO NOT / " DIAM. THIS FLAP FOLDS OVER THE EDGE OF THE DOOR (6mm) BE SURE THE FOLD IS EXACTLY ON THE LINE REFERENCE ONLY, NOT TO SCALE TO NOT REFERENCE ONLY, D2-PKG-1799E(b) 0609 D2-PKG-1799E(b) RIGHT HAND HAND RIGHT (with passage set) TEMPLATE B TEMPLATE CALL 800-849-8324 NOTE: Lock will accomodate doors 1 doors accomodate will Lock NOTE: allowances allowances must be made for strike location. proper installed, be to are silencers door When manufacturer to prevent collapsing of door. shall be provided by the hollow metal door to 2 13 13 11/16" /16" /16" (21mm) (21mm) 1 " " / (17mm) " 2 4 4 8 / / / " " (57mm) thick. Suitable reinforcement 1 3 1 1 2 " 2 THIS HOLE (38mm) (38mm) 4 (70mm) (70mm) (54mm) (54mm) / 1" DIAM. 1 FOR PASSAGE (25mm) 1 (32mm) (32mm) MODELS ONLY " 4 / 3 DOOR BEVEL BEVEL DOOR 2 " (70mm) 32 / 13 5 2 HOLES (137mm) 8-32 FHMS LATCH CUTOUT BE SURE THE FOLD IS EXACTLY ON THE LINE 3 / THIS FLAP FOLDS OVER THE EDGE OF THE DOOR 8 " (35mm) " 1 1/8" 3 (29mm) CAUTION 3 OUTSIDE BUT BUT OUTSIDE 2 /4" 2 /4" AND DRILL FROM FROM DRILL AND APPLY TEMPLATE TEMPLATE APPLY (70mm) (70mm) COMPENSATE FOR FOR COMPENSATE 1" (25mm) ANY. IF BEVEL DOOR DIAM. " " " 4 8 / 4 / " / 1 5 3 MARK CENTER MARK CENTER 16 2 1 / (19mm) (19mm) (57mm) (57mm) 9 (41mm) (41mm) OF DOOR OF DOOR 3 THICKNESS (90mm) THICKNESS 5/32" 5 2 1/4" /32" 2 1/4" (57mm) (4mm) (4mm) (57mm) 9 /16" 1 3/4" 1 3/4" (14mm) (44mm) 2 1/8" (44mm) 3 1 3/8" (54mm) DIAM. 1 /8" STRIKE BOX (35mm) THROUGH BORE (35mm) 1" (25mm) " 32 / 1 1/2" 1 1/2" 25 (38mm) (38mm) (20mm) 2" 2" (51mm) INSERT LATCH, MARK AROUND INSERT LATCH, MARK AROUND (51mm) FACE PLATE OF LATCH, MORTISE FACE PLATE OF LATCH, MORTISE CROSS BORE TO DEPTH REQUIRED TO DEPTH REQUIRED CROSS BORE 1/16" 1" (25mm) DIAM. 1" (25mm) DIA. FOR MODELS: 101x, 102x, 103x, 104x, L101x, L102x, L103x, L104x, L1076 L104x, L103x, L102x, L101x, 104x, 103x, 102x, 101x, MODELS: FOR (1.6mm) LATCH HOLE BOTTOM LATCH HOLE .