DOCSLIB.ORG

Spool Knit Jewelry: Make Beautiful Bracelets, Anklets and Rings Free

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Spool Knit Jewelry: Make Beautiful Bracelets, Anklets and Rings Free FREE SPOOL KNIT JEWELRY: MAKE BEAUTIFUL BRACELETS, ANKLETS AND RINGS PDF Anne Akers Johnson | 50 pages | 01 Mar 2004 | Scholastic US | 9781570548048 | English | New York, United States Spool Knit Jewelry: Make Beautiful Bracelets, Anklets and Rings - Anne Akers Johnson - Google книги I love knitting spools. I had one as a child and made knitted projects with yarn. Knitting spools are a fantastic way to teach children how to knit and be creative. This can be life changing for a little one. The will to create and make beautiful things can be a life long pursuit. I believe that's because I first learned to knit on a spool using flexible Spool Knit Jewelry: Make Beautiful Bracelets wire, Anklets and Rings has give to it. Craft Wire is of course, rigid by nature. Spool Knit Jewelry: Make Beautiful Bracelets struggled a few times and finally decided I would make it work. Thank you for Anklets and Rings gem of a saying, Tim Gunn. It helped me see that with craft wire you pull the wire out to the edge of your spool with your stylus, then flip the wire up and over your pin with your fingers. The tension is carried from one pin to the next - not through pulling on the tail as it is with flexible beading wire. String the wire down through the center of the knitting spool leaving about a 2" tail. Wrap the wire around your pins in the same manner as this Beaducation video minus the addition of beads. Step 2: Once you have completed your desired length of wire knitting, cut off about 2" extra wire from the spool and Spool Knit Jewelry: Make Beautiful Bracelets remove your knitted wire tube from the spool. Take the end of the wire and thread it into the last 5 open loops to secure your knitted tube. Spool Knit Jewelry: Make Beautiful Bracelets result will be a wonky shape as shown. Step 3: Using a draw plate, run your knitted wire tube through one of the large holes to begin smoothing out the shape. Then move to a smaller hole and so on until you are happy with the wire shapes and diameter. Step 4: Next, you'll need to finish off your wire ends. You may choose to use a Spool Knit Jewelry: Make Beautiful Bracelets or bead cap or you can wire wrap your own cones as I did. To wire wrap your cones, cut a 10" piece of 20 Gauge Bronze Craft Wire it's better to error on the side of too much length then not enough. Then begin wire wrapping the tube towards the end. When you get to the end of the knitted tube, use your round nose pliers to create a loop Spool Knit Jewelry: Make Beautiful Bracelets then wire wrapped back down the tube to where you started making sure to cover the tube entirely with wire and Spool Knit Jewelry: Make Beautiful Bracelets off excess. Repeat on the other side. Step 5: At this point you can add you jump rings and clasp or you Anklets and Rings make your own. I decided to make a simple hook clasp to finish off my bracelet. Cut " of 20 Gauge Bronze Craft Wire and straighten the wire with nylon jaw pliers. Step 6: Using my round nose pliers I Spool Knit Jewelry: Make Beautiful Bracelets a small loop on one end and then made a larger loop with my large bail making Wubbers pliers. Trim excess wire so it's about the same length as the little loop. Step 7: Lastly, work harden the clasp with a nylon hammer and rubber block and attach to one end of your bracelet. Here is the finished design. I especially like to wear it layered! I received a few small gauge spools of Soft Flex Craft Wire recently so, I figured it was time I tried to knit with it! For knitting, the best gauges are Thicker gauges are too hard to work with, and the finer gauges are too delicate and will easily break. I went with 26 gauge for my project. I learned to knit with Soft Flex Beading Wire which is flexible and bouncy. Knitting with Craft Wire is much more rigid and I admit, I found it to be challenging. After two failed attempts I finally got a chain going on my third try. I decided to add some beads to the chain as I knitted. I had some yellow chip beads left over from a previous Spool Knit Jewelry: Make Beautiful Bracelets and liked the brown and light yellow color combo, very earthy. I strung all my beads on the wire before I started knitting. I made the mistake of knitting without much thought of the size of the chain I needed. With Soft Flex Beading Wire, if I made the knitted wire too long I can easily back out some knits and shorten the design. With Soft Flex Craft Wire, not so much. I made the chain much too long for a bracelet, my initial intention. Then I thought maybe an anklet Then I thought I could make myself a necklace but, it was much too short. Finally, I realized it would fit my 7 year old son, who enjoys wearing jewelry. So, it became his necklace. He's 12 now, I wonder if he still has this necklace hiding someplace in his mess of a bedroom! Despite some frustration with the rigidness of the wire, the look of the finished design is interesting and something I will try again. Here are some lessons I learned for next time: - Decide what you want to make beforehand so, you have an idea of Anklets and Rings long to make the chain. In the October - November issue. This magazine is nice because it offers step-by-step photos. For a more complicated design, this can be quite helpful. Once you get going, this design is actually quite easy to replicate. If you get a chance, I hope that you will check it out! Projects not intended for children under the age of The information on this instruction sheet is presented in good faith, but no warranty is given, nor results guaranteed. She is the co-author of Seed Bead Revolutionan artist and creativity coach. She currently lives in Arizona with her husband, their two sons and two dogs. When she's not painting, drawing or beading, she enjoys reading, yoga, exploring the outdoors and traveling. You can email her at Kristen softflexcompany. Be sure to check out the video below for a great demonstration! Best Rope Necklace images in | rope necklace, necklace, jewelry inspiration Perennials Fabrics Anklets and Rings home to hundreds of premier designer acrylic fabrics, custom rugs and trimmings perfect for luxurious indoor and outdoor applications. Leather tassels can be used to add a decorative or bohemian-inspired flair to your goods. If you love the retro look of fringed handbags and vests, then you can bring this same fun flair to all your apparel and accessories with homemade tassels! You can also craft leather tassel keychains and charms to style this sweet finishing touch…. Leather Y style Statement Necklace with handcrafted hammered ring hangs from soft deerskin leather and is adorned with African brass trade Anklets and Rings on fringe detail. This fun statement necklace can be worn long or as a choker quickly with just the slide of a bead. Choose from 6 leather colors and 2 metal choices to make it uniquely yours. Soft deerskin leather fringe tassel on a handcrafted hammered ring hangs from a Anklets and Rings chain adorned with tiny gemstone beads. Choose from 9 leather colors and 5 different gemstones to make it uniquely Anklets and Rings. You see here Ruth Kneass hard at work on the beach and then her Anklets and Rings results—necklaces made of washed up treasures, a bit of leather, a bit of enamel, some cast driftwood here and there, and a whole lot of love. Each one of a kind piece begins with a natural form and, dare I say, improves it. They feel very right. The cast silver ones lie weighty on your necklace-place, the long driftwood ones make for excellent worry stones. And all this reminds me of one of my all time favorite…. This simple tutorial will walk you through the steps! Every girl's wardrobe needs a slice of summer all year round. Browse Blue Bungalow now and discover the latest in online womens fashion and summer clothing! Necklaces made from utility rope have hit the runways at Proenza Schouler and Lela Rose, to name a few. Dollar store jump ropes provide the colorful look of utility ropes without a major investment in supplies. This necklace requires learning one macrame knot to create an impressive-looking Spool Knit Jewelry: Make Beautiful Bracelets simple necklace. Pinterest is using cookies to help give you the best experience we can. Got it! Braided bracelets | + ideas in | diy bracelets, bracelets, friendship bracelets diy The lowest-priced brand-new, unused, unopened, undamaged item in its original packaging where packaging is applicable. Packaging should be the same as Anklets and Rings is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See details for additional description. This is an excellent book with great instructions and pictures showing how to make jewelry. My granddaughter and her friend enjoyed it very much. I also enjoyed using it. Verified Anklets and Rings Yes Condition: New.
Load more

Recommended publications
  • The Jewelry Department
    I)1:PARTMEM STORE MERCll'Vs'DlSE TWA-NUALS i-,:i!.iiililliliiil!i:i: Courtesy of International Studio Coml) in Gold and Horn ( Frcncli Design) DEPARTMENT STORE MERCHANDISE MANUALS THE JEWELRY DEPARTMENT BEULAH ELFRETH KENNARD, M.A. Editor of Series; Director of Department Store Courses, New York University; Chairman of Committee on Merchan- dise Courses for New York City Public Schools; Former Educational Director of the Department Store Education Association. ASSISTED BY E. LILLIAN HUTCHINSON, B. A. Secretary Department Store Education Association CONSULTING EDITOR LEE GALLOWAY, Ph.D. Associate Professor Commerce and Industry, New York University; Secretary of National Association of Corpora- tion Schools; Director Educational Courses, National Commercial Gas Association. NEW YORK THE RONALD PRESS COMPANY 1917 40fX>G Copyright, 1917, by The Ronald Press Company ^^ \"\ X Sljia ^tv\SB tfl Sfbtrat^b to Mrs. Henry Ollesheimer, Miss Virginia Potter, Miss Anne Mor- gan, and other organizers of the Department Store Education As- sociation, who desiring to give greater opportunity for advance- ment to commercial employees and believing that all business efficiency must rest upon a solid foundation of training and education gave years of enthusiastic service to the testing of this belief. EDITOR'S PREFACE This series of department store manuals has been pre- pared for the purpose of imparting definite and authen- tic information to that growing army of salespeople who are not satisfied to be mere counter servers — to those who realize that their vocation is one of dignity and opportunity, and that to give satisfactory service to the customer they must possess a thorough knowledge of the goods they sell, as well as a knowledge of how best to P^ f\ sell them.
    [Show full text]
  • Hollow Comb Rivets Made from Stripdrawn Copper Wire and Two Possible Antler Draw Plates from 11Th–12Th C. Sigtuna, Sweden
    Omslag 2019/2_Omslag 3/2004 (kopia) 2019-05-20 11:32 Sida 1 Innehåll F 57 Gardeła, L. et al. The spur goad from kort meddelande O R Skegrie in Scania, Sweden. Evidence of 115 Scheglov, A. Omarbetning av Olaus Petris N elite interaction between Viking Age krönika: Ett politiskt vittnesbörd – och V Ä Scandinavians and Western Slavs. heraldiskt? N N 75 Loftsgarden, K. The prime movers of iron E production in the Norwegian Viking and recensioner N 2 Middle Ages. 118 Larsson, B.T. & Broström, S-G. Nämforsens 0 1 9 88 Wärmländer, S.K.T.S. & Söderberg, A. Hällristningar – Sveriges största och äldsta / 2 Hollow comb rivets made from strip- hällristningsområde med 2600 figurer FORN drawn copper wire and two possible ant- (The rock of Nämforsen). Anmälan av ler draw plates from 11th–12th c. Sigtuna, V. Mantere. Sweden. 120 Ahlström, C. The Viking Age. A time of many faces. Anmälan av L. Gardeła. debatt 123 Ljung, C. Under runristad häll: Tidig- 100 Kjellström, R. Stalofrågan – en personlig kristna gravmonument i 1000-talets slutkommentar. Sverige. Anmälan av P. Carelli. VÄNNEN 107 Lovén, C. Var Beowulf gute? JOURNAL OF SWEDISH ANTIQUARIAN RESEARCH 2019/2 issn 0015-7813 Omslag 2019/2_Omslag 3/2004 (kopia) 2019-05-20 11:32 Sida 2 Utgiven av Till författaren Kungl. Vitterhets Historie och Antikvitets Akademien i samarbete med Historiska museet. fornvännen välkomnar manuskript i nordisk arkeologi och äldre tiders konstvetenskap med an grän sande Fornvännen finns på webben i sin helhet från första årgången och publiceras löpande där ämnen. Bidrag kan vara avfattade på de skandinaviska språken samt engelska, tyska och franska.
    [Show full text]
  • Silverwork and Jewelry, H Wilson Edited by W R Lethaby, 1903
    NYPL RESEARCH LIBRARIES 3 3433 07217841 V THE ARTISTIC CRAFTS SERIES OF TECHNICAL HANDBOOKS EDITED BY W. R. LETHABY SILVERWORK AND JEWELRY THE ARTISTIC CRAFTS SERIES OF TECHNICAL HANDBOOKS. Edited by W. R. Lethaby. TTHE series will appeal to handicraftsmen in the industrial -'- and mechanic arts. It will consist of authoritative state- ments by experts in every field for the exercise of ingenuity, taste, imagination—the whole sphere of the so-called "de- pendent arts." BOOKBINDING AND THE CARE OF BOOKS. A Handbook for Amateurs, Bookbinders, and Librarians. By Douglas Cpckerell. With 1 20 Illustrations and Diagrams by Noel Rooke, and 8 collotype reproductions of bindings. i2mo. net postage, 12 cents additional. ^1.25 ; SILVERWORK AND JEWELRY. a Text- Book for Students and Workers in Metal. By H. Wilson. With 160 Diagrams and 16 full-page Illustrations. i2mo. $1.40 net; postage, 12 cents additional. In Preparation : CABINET-MAKING AND DESIGNING. By C. Spooner. D. APPLETON AND COMPANY, NEW YORK. I THE NEW YORK PUBLIC LIBRAP'"' ASTOR, LENOX AND TILDEN FOUNDATIONS. Cambridge. The Foundress' Cup : Christ's College, SILVERWORK AND JEWELRY A TEXT-BOOK FOR STUDENTS AND WORKERS IN METAL BY H. WILSON. WITH DIAGRAMS BY THE AUTHOR AND OTHER ILLUSTRATIONS NEW YORK D. APPLETON AND COMPANY 1903 THE NEW YORK P!ir^''- LIBRARY 357689 ASTOR, LENOX AND T1LD€N FOUWPATION8. R 1503. L Copyright, 1903 By D. Appleton and Company c, .... -'y^ii fights reserved ' r c Published February, 1903 "An Art can only be learned in the workshop of those who are winning their bread by itJ*^ —Samuel Butler (* Erewhon ").
    [Show full text]
  • Jewelers' Equipment & Tools
    PAGE 109 Jewelers’ Equipment & Tools Saw Blades Anchor brand jeweler’s saw blades. Sizes: #4, #3, #2, 1/0, #2/0, #3/0, #4/0, #5/0, #6/0 - from largest (#4) to finest (#6/0) $3.75/144 10% discount assortable/12 gross Deluxe Saw Frame Throat and front mounted screw to adjust blade ten- Hardwood sion precisely. 3” throat. Sawblade $10.75 each Holder Rotates for easy selection. $13.50 each Adjustable Sawframe With 2.75” throat. $ 5.95 each WIRE DRAWING PLATES 8.5” specially hardened steel for shaping and reduc- ing jewelry wire. Round Hole Draw Plate, 82 holes (pictured above) $10.80 each, $116.64/12 Chromed Steel Sawframes Half-Round Hole Draw Plate, 30 holes Top Quality; great value! $12.50 each, $135.00/12 Hexagon Hole Draw Plate, 30 holes Adjustable sawframe with a 3” throat $12.50 each, $135.00/12 $ 8.50 each Marquise Hole Draw Plate, 30 holes $12.50 each, $135.00/12 Pear-shape Hole Draw Plate, 30 holes $12.50 each, $135.00/12 6” Adjustable Rectangle Hole Draw Plate, 30 holes Saw Frame $12.50 each, $135.00/12 $11.95 each Square Hole Draw Plate, 30 holes $ 12.50 each, $135.00/12 Triangle Hole Draw Plate, 30 holes $12.50 each, $135.00/12 PAGE 110 Tungsten Soldering Pick Draw Tongs Perfect for platinum’s higher temperatures. Non- Heavy duty, hand-forged. stick. Will not discolor or contaminate gold, silver 8” Draw Tongs ............$14.85 each or platinum. 10” Draw Tongs ..........$18.95 each $ 5.50 each Best Quality Titanium Solder Pick With anodized, non-roll hexagonal handles for non- stick use with gold & silver.
    [Show full text]
  • Basic Metal Toolkit
    Intro to Metalsmithing Basic Metal Toolkit Jeweler’s Saw $20.00 Saw Blades 4.75 Vernier Caliper 10.50 Steel Metric Ruler 7.95 Hardwood Ring Mandrel 16.00 Scribe 8.95 Plier & Cutter Kit 29.00 Needle File Kit 14.95 Dividers 11.00 Bur Life 5.50 A Pin Vise 9.95 Bench Pin with Anvil 16.95 Twist Drills 6.45 Center Punch 8.95 B Hammer Kit 59.00 C Sand Paper Assortment 17.60 D Pocket Wire Gauge 14.95 Steel Square 4.55 Optivisor 6.45 Metalsmith Essentials - Tim McCreight 15.00 Estimated Total $288.45 ! A. Can substitute beeswax for Bur Life! B. Can make your own from an old nail.! C. You can pick up hammers from home improvement stores and alter them.! !D. You can buy sandpaper at home improvement stores for less and in bulk.! ! "1 of "7 Intro to Metalsmithing Measurement Resources Conversion Website www.convert-me.com Will convert units of distance and length instantly. Metric Conversions www.metric-conversions.org Excellent free resource to convert from Imperial to Metric ! ! Formulas! ! "2 of "7 Intro to Metalsmithing ! Terminology (Small List)! ! Alloy Mixture of metals; sterling silver is an allow of fine silver and copper. Annealing The process of heating and then cooling metal to make it softer and thus easier to work with. Base Metal Nonprecious metal, such as aluminum, copper, iron and nickel. Bezel The rim of metal that is used to secure a stone in a rub-over setting. Blank A flat shape cut from sheet metal.
    [Show full text]
  • Jewellery Making and Essential Skills
    Literacy and Essential Skills in Industrial Arts JEWELLERY MAKING COURSE Student Notes A project of Literacy Ontario Central South This project is funded by the Government of Canada’s Office of Literacy and Essential Skills ACKNOWLEDGEMENTS LOCS would like to gratefully acknowledge the Office of Literacy and Essential Skills, Human Resources Development Canada for funding this project. The Literacy and Essential Skills Project Team Lesley Hamilton – Project Manager David Haw – Project Coordinator Shelley McCarrell – Project Assistant Elise Noriega – Project Assistant Carrie Wakeford – Project Writer Brigid Hayes – Project Evaluator Advisory Committee Andrew Rothfischer – Ministry of Natural Resources Doug Noyes – Literacy Link Eastern Ontario Kathy Neill – John Howard Society of Peterborough Sheila Cowan – LOCS Board of Directors Walter Johnstone – Youth Emergency Shelter LOCS would like to extend a heartfelt thanks to David Haw the Project Coordinator without whom this project would not have been successful. The vision that David brought to this project was the driver that made everything happen. LOCS would like to thank Valerie Davidson of Valerie Davidson Jewellery who worked with us to create course material. Not only did she work with the writer but she delivered a pilot course of the material created. © 2010 Literacy Ontario Central South Literacy and Essential Skills in Industrial Arts – Jewellery Making The following participants took part in the piloting of the material. Dennis Laroche Murdock McNeil Shane Edwards Janet Marfleet Don Lester Afson Tahery Their participation in the pilot was extremely helpful. Their feedback helped us create the final version of this course. These students all deserve a big thank you for the time and effort they put into assisting us with this project.
    [Show full text]
  • 22 2. E? (2%Zee//7Z 66W6
    J. M. CLARK. MANUFACTURE OF ORNAMENTAL TUBIN G. No. 174,117. Patented Feb. 29, 1876. oly2. 8 A. %zele, .. o/zverzów 22 2. e? (2%zee//7z 66w6. UNITED STATES PATENT OFFICE. JAMES M. CLARK, OF JERSEY CITY, NEW JERSEY. IMPROVEMENT IN THE MANUFACTURE OF oRNAMENTAL TUBING. Specification forming part of Letters Patent No. 174.1 17, dated February 29, 1876; application filed February 3, 1876. To all whom it may concern: the angle of the inclination of the grooves is Be it known that I, JAMES M. CLARK, of the reverse. Jersey City, in the county of Hudson and State The thin sheet-metal tube is inserted through of New Jersey, have invented an Improve this die at upon the draw bench, and pulled ment in the Manufacture of Ornamental Tub through such die. Either the tube or the die ing, of which the following is a specification: must be allowed to revolve in consequence Ornamental tubing for pencil-cases has been of the screw form of the grooves. This op made with grooves and ribs similar to a three, eration imparts to the tube the form shown four, or more threaded screw, and this orna in Fig. 2, and it is to be understood that a mentation has been done by a draw-plate die tube in the form shown in Fig. 2 has before properly shaped, and a spiral or twist man been made, and I do not claim the same. drel upon which the tube has been placed. The tube is to be run through the second Tubes and pencil - cases have been orna draw-plate die b, in which the grooves stand mented by an engraved figure put upon the at the opposite angle, the result of which is same by an engraving-engine, such figure be that the first ribs are crossed by a second set ing composed of ranges of diamond forms in of grooves that divide such ribs into quad relief.
    [Show full text]
  • Copper Work : a Text Book for Teachers and Students in the Manual Arts
    CHAFING DISH COPPER WORK A Text Book for Teachers and Students IN THE Manual Arts FULLY ILLUSTRATED BY AUGUSTUS F. ROSE Providence Technical High School and Rhode Island School of Design THE DAVIS PRESS Worcester, Massachusetts Igo6 Copyrighted, 1906 By Augustus F. Rose THE GETTY CENTER LiBRARY TABLE OF CONTENTS. PAGE Chapter I.—Introduction, Equipment, Materials i Chapter II.—Problems, Escutcheons and Hinge Tail 13 Chapter III.—Drawer and Door Pull and Hinge 20 Chapter IV.—Finger Plates, Pad Comers, Box Corners, Stamp Box and Match Box 35 Chapter V.—Sconce, Picture Frame, Soldering, Repousse or Embossing 53 Chapter VI.—Raised Forms 67 Chapter VII.—Porringer, Trays or Plates 78 Chapter VIII.—Ink Pot, Sealing Wax Set and Watch Fobs 84 Chapter IX.—Spoons, Sugar Tongs and Tea Scoops, Rivets, Drawing Wire and Tubing, Polishing, Stamping Work, Coloring 95 Chapter X.—Enameling 104 Digitized by the Internet Archive in 2018 with funding from Getty Research Institute https://archive.org/details/copperworktextboOOrose PREFACE. IN this book the subject of Copper Work, as it may be introduced into the public schools, is treated to the extent of specifying an equipment and suggesting some of the possibilities of a course. Not only will there be found an abundance of illustrative material on this subject, con¬ sisting of drawings and photographs of various objects executed by upper grammar and high school pupils, but also a detailed description of the processes necessary for the execution of many of the designs. It is not expected that the problems as given will be slavishly copied, but rather that they will make clear the methods and processes that may be applied in the working out of similar problems.
    [Show full text]
  • Making Wire and Tube by Gary Wooding, 2007
    Making Wire and Tube by Gary Wooding, 2007 Draw-plates Draw-plates are ancient devices used for reducing the diameter of wire, and consist of a tapered hole in a hard plate; their first recorded use can be traced back to 3000BC in Egypt. Fig 3-A shows the shape of a typical hole. The small hole determines the cross section of the wire and the transition from the tapered to parallel hole is smoothly rounded. Wire slightly larger than the small hole is “funnelled” into it by pulling or “drawing”, as shown in Fig 3-B. They are not restricted to round holes; holes of almost any shape are possible. The plate is usually made of hardened steel, but more durable (and more expensive) ones contain TC (tungsten-carbide), or even diamond, inserts. The most common form contains a series of numbered holes of slightly different sizes, arranged Photo 1 so that after pulling wire through one hole it is of a size suitable for feeding into the next smaller one. The numbers just identify the holes and have no connection with the actual size. Where a great deal of wire making is done it is more usual to have many plates each containing just one hole. Photo 1 shows a selection of draw-plates: the largest measures 270x50mm. All are of normal hardened steel except D and F which have TC inserts, and all except B, E and H are for standard round wire. B and H are for “D” section wire, and E has an assortment of shapes: square, “D”, triangular, hexagonal, and round.
    [Show full text]
  • Final-Jewellery Tools
    Dear Valued Customer K.S.B. INTERNATIONAL in India is the pioneer organization engaged in the manufacturing of premium quality watchmaking tools, jewelery tools, hobby tools, engineering tools and all types of aluminum boxes (round with glass tops and rectangular containers). We feel proud to say that we are the leader in these products so far the range is concerned. Established in 1976, the company believes in providing its customers the best of products coupled with efficient services. GREAT ADAPTABILITY to the need and requirements of its customers and the ATTRACTIVE PRICES for the quality has made LIBERTY - the brand name of K.S.B. INTERNATIONAL, one of the most reputable firm in New Delhi, India. Our above mentioned products are widely exported and are in constant demand throughout Europe, U.S.A. and Canada. The biggest asset of K.S.B. INTERNATIONAL is its highly professional and skilled manpower that includes 40 highly skilled and 46 semi skilled workers. Regular in-house training programs and workshops are held to keep the staff abreast of the latest technology and techniques. K.S.B. TOOLS INDUSTRIES, Unit-II, has recently been setup by our principal unit K.S.B. INTERNATIONAL to cater exclusively to export market. This manufacturing unit is spread in a total area of 10,000 sq. ft. at Bawana Industrial Estate, Delhi, India. The unit has all the facilities under one roof. We have a wide range of equipment including - cylindrical centerless, surface grinding, milling machines, hydraulic presses, lathe machines, shapers, power presses, automatic threading / knurling, traubs and drill machines.
    [Show full text]
  • Recommended Jewellery Tools for Training
    RECOMMENDED JEWELLERY TOOLS FOR TRAINING Setting up your workshop for Advanced Jewellery Training. The JTS Advanced courses & Apprentice training caters for students who have basic jewellery making skills ac- quired from either our beginner courses or from face to face classes that you may have previously completed. Check the tool list to make sure you have the necessary tools for the project & for training. To find the specialized tools locally, Google search; ‘jewellery tool supplies’ or for US students; jewelry For international supplies go to; www.riogrande.com There is of course one more important addition to the list. A strategically positioned media player to view the JTS lessons. SAFETY FIRST PIERCING SAW & CUTTING TOOLS HAND & NEEDLE FILES You can start your collection of files The most important thing in your work- Every jewellers best friend is the pierc- with a flat file and a half round ring file. shop is your health and safety. Make sure ing saw. 4/0 and 5/0 blades will get you There are different cutting grades, so you have the necessary safety gear on through most advanced lessons.. I rec- start with a number 2 cut then add ‘0’ hand. Wear safely goggles at all times, ommend that you practice saw piercing cut files later. so that you limit the amount of blade wear a dust mask when using your drill, breakages. Other cutting tools to add Needle files are cheaper to buy by the and extraction or ventilation should be in to your list are shears & a pair of end set, with all shapes included.
    [Show full text]
  • AS Viking Knit Documentation
    Documentation for your consideration Viking Knit (aka Trichinopoly chain) Drífa at lækjamoti (Dawn) 2015 INTRODUCTION ........................................................................................................................................ 4 DESCRIPTION OF ENTRY .............................................................................................................................. 4 VIKING KNIT IN PERIOD ........................................................................................................................ 4 NOTABLE FINDS ........................................................................................................................................... 4 Hämeenlinna necklace ............................................................................................................................ 5 Man’s cuff ............................................................................................................................................... 6 Trewhiddle scourge ................................................................................................................................ 7 Chain fragment ....................................................................................................................................... 7 Ardagh chalice........................................................................................................................................ 8 Pendant chains ......................................................................................................................................
    [Show full text]