WATCH DISPLAY TIMESETTING INSTRUCTION MANUAL IMPORTANT Stauer Automatic Tourbillon Watch the CONSTRUCTION TOURBIL

Total Page：16

File Type：pdf, Size：1020Kb

WATCH DISPLAY TIMESETTING INSTRUCTION MANUAL IMPORTANT Stauer Automatic Tourbillon Watch the CONSTRUCTION TOURBIL

WATCH DISPLAY TIMESETTING position I. The crown must remain in TOURBILLON WATCH position I to resist water. 3. The balance wheel and the escapement are (1)There are 28 jewels in the movement. featured through a special cut-away window (2)This automatic watch features the gener- XII (B) (part D). You can view this amazing timing XI I al functions of minute and hour, as well This watch features minute and hour mechanism in action! The balance wheel (A) II as the unique function of tourbillon. X 1 2 hands as well as a unique cut-away and escapement do not require setting and III XI (C) window displaying the balance wheel will continue to keep motion while watch is (3)There is no need to hand wind a and the escapement in a rotating cage. sufficiently wound. Tourbillon watch if already fully wound IIII and worn daily. VIII (D) 1. Locate the crown on your Stauer watch (above diagram part C). Before the watch is worn for the first time, wind the crown by hand, ten (10) cycles by rolling the crown A - HOUR HAND clockwise (away from you) while in posi- B - MINUTE HAND tion I. Please note the two crown positions C - CROWN (I-II) in above watch illustration. D - BALANCE WHEEL / 2. To set the time, pull the crown out to posi- ESCAPEMENT WINDOW tion II, which will allow you to position watch hands for proper time selection. Once time is set, push the crown back into THE CONSTRUCTION IMPORTANT A Watch Winder is a great investment to ensure all of your Stauer wristwatches are Material of case, case back and buckles: keeping correct time and ready for you All stainless steel • Please remember to wear your Stauer watch at any time! Take advantage of our Watch each day to ensure its lifelong accuracy and Dial: White dial, blue stainless steel hands. Winder offers on our website. Visit us at, dependability for your timekeeping needs. www.stauer.com to learn more about the Strap: Italian genuine leather By continually wearing your Stauer watch, fantastic benefits of owning a Watch Winder! Movement: Tourbillon is a device to elimi- you will be taking full advantage of its state Stauer Automatic www.stauer.com nate errors of rate in the vertical positions. It of the art automatic winding feature which, Tourbillon Watch consists of a mobile and stable carriage carry- allows the watch to function utilizing your ing all the parts of the escapement. Time simple body movement. It can, however, be INSTRUCTION MANUAL accuracy is between +15”~ -5”, and the reactivated simply by instilling motion by watch contains 28 jewels. being worn. When not wearing the watch, resting the watch on its side (with crown fac- ing towards the ceiling) will help to keep more accurate time. .

Copy Link

Recommended publications

Floating and Platform Balances an Introduction
Floating and Platform Balances An introduction ©Darrah Artzner 3/2018 Floating and Platform Balances • Introduce main types • Discuss each in some detail including part identification and function • Testing and Inspecting • Cleaning tips • Lubrication • Performing repairs Balance Assembly Type Floating Platform Floating Balance Frame Spring stud Helicoid spring Hollow Tube Mounting Post Regulator Balance wheel Floating Balance cont. Jewel Roller Pin Paired weight Hollow Tube Safety Roller Pivot Wire Floating Balance cont. Example Retaining Hermle screws Safety Roller Note: moving fork Jewel cover Floating Balance cont. Inspecting and Testing (Balance assembly is removed from movement) • Inspect pivot (suspension) wire for distortion, corrosion, breakage. • Balance should appear to float between frame. Top and bottom distance. • Balance spring should be proportional and not distorted in any way. • Inspect jewels for cracks and or breakage. • Roller pin should be centered when viewed from front. (beat) • Rotate balance wheel three quarters of a turn (270°) and release. It should rotate smoothly with no distortion and should oscillate for several (3) minutes. Otherwise it needs attention. Floating Balance cont. Cleaning • Make sure the main spring has been let down before working on movement. • Use non-aqueous watch cleaner and/or rinse. • Agitate in cleaner/rinse by hand or briefly in ultrasonic. • Rinse twice and final in naphtha, Coleman fuel (or similar) or alcohol. • Allow to dry. (heat can be used with caution – ask me how I would do it.) Lubrication • There are two opinions. To lube or not to lube. • Place a vary small amount of watch oil on to the upper and lower jewel where the pivot wire passed through the jewel holes.
[Show full text]
Evolution of Clock Escapement Mechanisms
Miodrag Stoimenov Associate Professor Evolution of Clock Escapement University of Belgrade Faculty of Mechanical Engineering Mechanisms Branislav Popkonstantinović Associate Professor The paper presents and explains the evolution of details design of the clock University of Belgrade escapement mechanisms through the ages. As particularly significant, the Faculty of Mechanical Engineering following mechanisms are emphasized: the crown wheel (verge & foliot), Ljubomir Miladinović anchor recoil, deadbeat and detached escapements, and their variations – Associate Professor gravity and chronometer escapements, as well as the English and Swiss University of Belgrade lever watch escapements. All important geometrical, kinematical and Faculty of Mechanical Engineering dynamical properties and the influence of these properties on the clock Dragan Petrović accuracy are explained. Associate Professor University of Belgrade Keywords: clock, escapement, evolution, mechanism, lever. Faculty of Mechanical Engineering 1. INTRODUCTION oscillator with the restoring force and standardized pace. The crown wheel rate, acted upon by driving torque, is This work is aimed at a qualitative analysis of regulated only by the foliot inertia with a rather advancement in escapement mechanism structural unpredictable error. When the crown wheel is rotating, definition and development of a timepiece over the past the pallet of the verge is caught by one of the wheel’s seven centuries. This study cowers the following issues teeth, rotating the verge and a solid foliot in one a) the crown wheel, the verge and foliot, b) the recoil direction and leading to engagement of the opposite anchor escapement, c) deadbeat escapements, and d) tooth with the second pallet [4]. Due to the foliot inertia, detached escapements. Measure of the effectiveness in that next tooth stops the wheel’s motion, and the wheel the regulator horological properties could be specified with its eigen driving torque finally stops the rotation of as follows: a) the level of constructive and dynamic the foliot too.
[Show full text]
Checking for Proper Drop/Lock in the Swiss Lever Escapement
w I • w <( LLJ 0 z c 1- m ~ :::J LLI Ul 11. ~ 1- ::J ::J z 0 <( [J I z 0 w :::: w 0:: w c:: w I I l.L f- m LLI 1- w 0 z I J: z 0:: 1- 1- 0 o_ 0 HoROLOGICAL'" HoROLOGICALTM TIMES Official Publication of the American Watchmakers-Ciockmakers Institute TIMES EDITORIAL & EXECUTIVE OFFICES VOLUME 31, NUMBER 4, APRIL 2007 American Watchmakers-Ciockmakers Institute (AWCI) 701 Enterprise Drive, Harrison, OH 45030 Phone: Toll Free 1-866-FOR-AWCI (367-2924) or (513)367-9800 FEATURE ARTICLES Fax: (513)367-1414 E-mail: [email protected] 6 Patek Philippe 10-Day Tourbillon, By Ron DeCorte Website: www.awci.com 16 Checking for Proper Drop/Lock in the Swiss Lever Office Hours: Monday-Friday 8:00AM to 5:00 PM (EST) Escapement, By John Davis Closed National Holidays 22 ETACHRON, Part 2, By Manuel Yazijian Donna K. Baas: Managing Editor, Advertising Manager Katherine J. Ortt: Associate Editor, Layout/Design Associate DEPARTMENTS James E. Lubic, CMW: Executive Director Education &Technical Director 2 President's Message, By Dennis Warner Lucy Fuleki: Assistant Executive Director Thomas J. Pack, CPA: Finance Director 2 Executive Director's Message, By James E. Lubic Laurie Penman: Clock Instructor 4 Questions & Answers, By David A. Christianson Manuel Yazijian, CMW: Watchmaking Instructor Certification Coordinator 26 From the Workshop, By Jack Kurdzionak Nancy L. Wellmann: Education Coordinator Sharon McManus: Membership Coordinator 31 AWCI Material Search Heather Weaver: Receptionist/Secretary 32 Affiliate Chapter Report, By Wes Cutter Jim Meyer: IT Director 35 AWCI New Members HOROLOG/CAL TIMES ADVISORY COMMITTEE Ron Iverson, CMC: Chairman 39 Bulletin Board Karel Ebenstreit, CMW 42 Industry News Jeffrey Hess Chip Lim, CMW, CMC, CMEW 44 Classified Advertising E-mail: [email protected] 48 Advertisers' Index AWCI OFFICERS Dennis J.
[Show full text]
History of Escapement Mechanisms
Journal of Mechatronics, Automation and Identification Technology Vol. 3, No.2. pp. 8-12 History of Escapement Mechanisms Miša Stojićević, Branislav Popkonstantinović, Ljubomir Miladinović, Ivana Cvetković Faculty of Mechanical Engineering, Belgrade, Serbia Faculty of Mechanical Engineering, Belgrade, Serbia Faculty of Mechanical Engineering, Belgrade, Serbia Innovation Centre of the Mechanical Faculty Belgrade, Serbia [email protected], [email protected], [email protected], [email protected] Abstract—This paper describes a history of development one of the most important part of mechanical clock – escapement mechanism. Escapement mechanism is a device designed to maintain a constant average speed of the escape wheel, by allowing it to rotate to the desired angle at certain impulse of time. While doing that it simultaneously support the oscillations of the pendulum or balance spring, by compensating for friction losses and air resistance. 7 century long history of escapement mechanisms, from 13th century verge mechanism up to modern-day escapements that can be found in luxury watches, will be shortly presented. Through lives of famous clockmakers and their achievements in field of making escapement mechanism will be given a new insight in science of time keeping - horology. Keywords— escapement, mechanism, history, watches, clock I. INTRODUCTION Fig. 1 Verge escapement The escapement mechanism is a key part of every However, the late middle Ages also recorded the mechanical clock, because it maintains and counts appearance of hand and pocket watchmakers. The first oscillations of the oscillator and thus measures the flow portable timer, the so-called. The Nuremberg egg (Fig. 2), of time. It can be also said that escapement is a device which could be worn in a pocket or purse (Ger.: that transfers energy to the timekeeping element (the taschenuhr), was constructed in Nuremberg by "impulse action") and allows the number of its watchmaker Peter Henlein, (1485-1542) oscillations to be counted (the "locking action").
[Show full text]
It Could Prove Your Wisest Investment. It Takes a Long Time to Build a Maker's High Standards
It could prove your wisest investment. It takes a long time to build a maker's high standards. A lineup to With SEIKO Battery, that's reputation for dependable, quality grow with. something you can always count on. products and service. The top SEIKO Battery power cells work reliability ofSEIKO's long-life watch in virtually every brand watch just as batteries will reassure you and your well as they work in a SEIKO. So customers it was time well spent. while not every watch can be a There are dozens of different SEIKO, its battery can. SEIKO quality watch batteries in the SEIKO Make sure every moment of your BATTERY Battery lineup. All designed and time and your customers' time is produced to the leading watch- well-spent. Grow with the Leader VOLUME 11, NUMBER 8 AUGUST 1987 HOROLOGICAL Official Publication of the American Watchmakers Institute WILLIAM BIEDERMAN PRESIDENT'S MESSAGE 12 4 Recap on AW/ Board Meeting HENRY B. FRIED QUESTIONS AND ANSWERS 8 A Pendulum's Elliptical Motion JOE CROOKS BENCH TIPS 12 Locking the Lock Wheel AWi Annual ARCHIE B. PERKINS TECHNICALLY WATCHES 14 Antique Watch Restoration, Part XX Meeting FRED S. BURCKHARDT ROCK QUARRY 18 A Day in the Life . 24 STEVEN G. CONOVER CHIME AND STRIKE 20 Gilbert Strike TIMOTHY R. WHITE CLOCKS INSIDE AND OUT 28 A Practical Guide to the Brocot Escapement Brocot MARSHALL F. RICHMOND PICKLE BARREL 32 Basic Jewelry Repair (Lesson 11) Setting Up a Basic Jewelry Shop Escapement JAMES ADAMS NOVICE WATCHMAKER 35 Mainsprings and Motor Barrels Guide WES DOOR SHOPTALK 36 Pricing Quartz Repairs 28 THOMAS H.
[Show full text]
Modern Books on Horology 3
, HABrAHC U. S. DEPARTMENT OF COMMERCE Letter 2.3 national bureau of standards Circular WASHINGTON 25, D. C. LC981 April 1, 1950 ( Supersedes LC766) 1.. 2. MODERN BOOKS ON HOROLOGY 3. Contents General Information Historical and Descriptive Books Technical Books 4 Government Publications 1. General Information The purpose of this letter circular is to present a list of books which will be found valuable for the use of watchmakers, collectors, and others interested in timepieces and in their performance and repair. No attempt has been made to include books earlier. than 1900 or to list books in other than the English language, or numerous articles published in trade journals and horological magazines. Some of the books listed are obtainable from dealers; some, now unobtainable, can be found in public libraries. Price lists of books now on the market may be obtained from the watchmakers' supply dealers or from the following: The American Horologist, 226 Sixteenth St., Denver, Colo. The American Library Service, 117 West 4$th St., New York, N. Y. Henry Paulson Ave 111. & Co., 37 South Wabash . Chicago, Jewelers Circular - Keystone, Book Department, 100 East 42nd St., New York, N. Y. National Jeweler, 531 South LaSalle St., Chicago, 111. Books not found at these sources .may often be found by advertising in the jewelers' trade journals. A more extensive list of references on time, timepieces, and related subjects will be found in Time and Timepieces by Willis I. Milham, Appendix V, page 569 (1923). , 2 2 • Historical an d Descriptive Books 1. Time Telling Through the Ages Harry C.
[Show full text]
Dynamics of Periodic Impulsive Collision in Escapement Mechanism
Shock and Vibration 20 (2013) 1001–1010 1001 DOI 10.3233/SAV-130800 IOS Press Dynamics of periodic impulsive collision in escapement mechanism Jian Maoa,∗,YuFub and Peichao Lia aShanghai University of Engineering Science, Shanghai, China bTianjin Seagull Watch Co. Ltd, Tianjin, China Received 10 May 2012 Revised 25 January 2013 Accepted 13 April 2013 Abstract. Among various non-smooth dynamic systems, the periodically forced oscillation system with impact is perhaps the most common in engineering applications. The dynamical study becomes complicated due to the impact. This paper presents a systematic study on the periodically forced oscillation system with impact. A simplified model of the escapement mechanism is introduced. Impulsive differential equation and Poincare map are applied to describe the model and study the stability of the system. Numerical examples are given and the results show that the model is highly accurate in describing/predicting their dynamics. Keywords: Periodic collision, dynamics, escapement mechanism 1. Introduction Dynamics is an important branch of mechanical engineering. In the last century, the linear dynamics was well studied and understood. However, nonlinear dynamics is far from being fully understood because of its complexity and diversity [1]. Non-smooth dynamical system is a special category of nonlinear system. In practice, it is not difficult to find non-smooth dynamical systems, such as a hammer hitting a nail, a signal triggering an electrical circuit, and a disaster affecting the stock market. It is known that a typical smooth dynamical system can be described by an autonomous set of Ordinary Differen- tial Equations (ODEs) [2–6]. Newton method and Lagrange’s equation are two basic tools to model such dynamical systems.
[Show full text]
Operating Principles, Common Questions, and Performance Data for an Atmospheric Driven Atmos Clock David Moline Clemson University
Clemson University TigerPrints Publications Mechanical Engineering 1-2015 Operating Principles, Common Questions, and Performance Data for an Atmospheric Driven Atmos Clock David Moline Clemson University John Wagner Clemson University, [email protected] Follow this and additional works at: https://tigerprints.clemson.edu/mecheng_pubs Part of the Mechanical Engineering Commons Recommended Citation Please use publisher's recommended citation. This Article is brought to you for free and open access by the Mechanical Engineering at TigerPrints. It has been accepted for inclusion in Publications by an authorized administrator of TigerPrints. For more information, please contact [email protected]. Atmos Article for NAWCC Bulletin Operating Principles, Common Questions, and Performance Data for an Atmospheric Driven Atmos Clock David Moline and John Wagner (Chapter 126 - Western Carolinas members) Abstract: The elegance of the Atmos clock and the curiosity of mankind in self-operational mechanical systems have propelled this time device into our collective desire for more knowledge. The search for a self-winding time piece, based on normal atmospheric fluctuations, was pursued for centuries by horologists with the well-known clock proposed by J. L. Reutter and commercialized by Jaeger LeCoultre. This clock has generated numerous discussions throughout the years as noted in past Bulletin articles and other correspondences within the time keeping community. In this paper, the operating principles of the Atmos clock will be reviewed using fundamental science and engineering principles. Next, key questions and experimental observations will be discussed in light of the operating concepts to clarify the clock’s performance. Finally, an extensive database will be introduced which was gathered through physical measurements and data recording of an Atmos 540 clock.
[Show full text]
Readingsample
History of Mechanism and Machine Science 21 The Mechanics of Mechanical Watches and Clocks Bearbeitet von Ruxu Du, Longhan Xie 1. Auflage 2012. Buch. xi, 179 S. Hardcover ISBN 978 3 642 29307 8 Format (B x L): 15,5 x 23,5 cm Gewicht: 456 g Weitere Fachgebiete > Technik > Technologien diverser Werkstoffe > Fertigungsverfahren der Präzisionsgeräte, Uhren Zu Inhaltsverzeichnis schnell und portofrei erhältlich bei Die Online-Fachbuchhandlung beck-shop.de ist spezialisiert auf Fachbücher, insbesondere Recht, Steuern und Wirtschaft. Im Sortiment finden Sie alle Medien (Bücher, Zeitschriften, CDs, eBooks, etc.) aller Verlage. Ergänzt wird das Programm durch Services wie Neuerscheinungsdienst oder Zusammenstellungen von Büchern zu Sonderpreisen. Der Shop führt mehr als 8 Millionen Produkte. Chapter 2 A Brief Review of the Mechanics of Watch and Clock According to literature, the ﬁrst mechanical clock appeared in the middle of the fourteenth century. For more than 600 years, it had been worked on by many people, including Galileo, Hooke and Huygens. Needless to say, there have been many ingenious inventions that transcend time. Even with the dominance of the quartz watch today, the mechanical watch and clock still fascinates millions of people around the, world and its production continues to grow. It is estimated that the world annual production of the mechanical watch and clock is at least 10 billion USD per year and growing. Therefore, studying the mechanical watch and clock is not only of scientiﬁc value but also has an economic incentive. Never- theless, this book is not about the design and manufacturing of the mechanical watch and clock. Instead, it concerns only the mechanics of the mechanical watch and clock.
[Show full text]
The History of Watches
Alan Costa 18 January, 1998 Page : 1 The History of Watches THE HISTORY OF WATCHES ................................................................................................................ 1 OVERVIEW AND INTENT ........................................................................................................................ 2 PRIOR TO 1600 – THE EARLIEST WATCHES ..................................................................................... 3 1600-1675 - THE AGE OF DECORATION ............................................................................................... 4 1675 – 1700 – THE BALANCE SPRING ................................................................................................... 5 1700-1775 – STEADY PROGRESS ............................................................................................................ 6 1775-1830 - THE FIRST CHRONOMETERS ........................................................................................... 8 1830-1900 – THE ERA OF COMPLICATIONS ..................................................................................... 10 1900 ONWARDS – METALLURGY TO THE RESCUE? .................................................................... 12 BIBLIOGRAPHY ....................................................................................................................................... 15 Alan Costa 18 January, 1998 Page : 2 Overview and Intent This paper is a literature study that discusses the changes that have occurred in watches over time. It covers mainly
[Show full text]
Model of a Mechanical Clock Escapement John Wagner Clemson University, [email protected]
Clemson University TigerPrints Publications Mechanical Engineering 7-2012 Model of a Mechanical Clock Escapement John Wagner Clemson University, [email protected] David Moline Clemson University Eugene Vold National Association of Watch and Clock Collectors Follow this and additional works at: https://tigerprints.clemson.edu/mecheng_pubs Part of the Mechanical Engineering Commons Recommended Citation Please use publisher's recommended citation. This Article is brought to you for free and open access by the Mechanical Engineering at TigerPrints. It has been accepted for inclusion in Publications by an authorized administrator of TigerPrints. For more information, please contact [email protected]. Model of a mechanical clock escapement David Moline Department of Electrical Engineering, Clemson University, Clemson, South Carolina 29634 John Wagner Department of Mechanical Engineering, Clemson University, Clemson, South Carolina 29634 Eugene Volk National Association of Watch and Clock Collectors, Western Carolina Chapter #126, 636 Cherokee Terrace, Lake Toxaway, North Carolina 28747 (Received 12 April 2011; accepted 9 April 2012) The mechanical tower clock originated in Europe during the 14th century to sound hourly bells and later display hands on a dial. An important innovation was the escapement mechanism, which converts stored energy into oscillatory motion for ﬁxed time intervals through the pendulum swing. Previous work has modeled the escapement mechanism in terms of inelastic and elastic collisions. We derive and experimentally verify a theoretical model in terms of impulsive differential equations for the Graham escapement mechanism in a Seth Thomas tower clock. The model offers insight into the clock’s mechanical behavior and the functionality of the deadbeat escapement mechanism. VC 2012 American Association of Physics Teachers.
[Show full text]
The Escapement
THE ESCAPEMENT Key to time Have you ever wondered why a mechanical watch goes “tick-tock”? The ticking is produced by the escapement, a strategic part that plays a key role in the movement’s measurement of time. This mechanism, consisting of several components, is a triumph of microtechnology. Its complex and exacting production process calls on all of the brand’s vast know-how and ingenuity. THE ESCAPEMENT “Tick”: a tooth of the escape wheel locks against one of the pallets. Then, released by the sweep of the oscillator – the strategic duo formed by the hairspring and the balance wheel – the pallet fork lets the wheel “escape”. The wheel continues to rotate and locks against the second pallet: “tock”. Only one-eighth of a second separates the “tick” and the “tock” that are so characteristic of mechanical timepieces. Synchronized by the oscillations of the hairspring and balance wheel , the pallet fork continues its infinite pendular beat against the oblique teeth of the escape wheel at a rate of 28,800 beats per hour – 14,400 “ticks” and just as many “tocks”. INTERACTION WITH THE OSCILLATOR Through its alternating beats, in interaction with the oscillator, the escapement is the “key to time” in the movement. It receives and regulates the raw energy from the mainspring and transmits that energy in impulses to the oscillator, which determines the division of time. Without the escapement, the mainspring would unwind in one go and release all its energy at once. And without the escapement to maintain the oscillations, the hairspring and balance wheel would rapidly lose their momentum and the movement would stop after a few minutes.
[Show full text]