DOCSLIB.ORG

The Results Blunt Trauma Could Medieval Arrows Pierce Armour?

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
The Results Blunt Trauma Could Medieval Arrows Pierce Armour? Could medieval arrows pierce armour? The Results Blunt Trauma Medieval archers used different arrows, Long thin bodkin heads were developed Archers Mark Stretton and John Potter The later style, lozenge-shaped bodkin arrows were The buckling of the armour on arrow heads and weights of bow to in the 13th Century to pierce mail armour, shot a series of replica medieval arrows shot first. The first one hit the lower section of the impact is as significant as the undertake specific tasks. which was the standard military defence. at this replica steel breastplate from fifty breastplate (the plackart), which is double thickness. penetration of the arrow head. The arrow cut through both layers of armour (3mm A blunt trauma impact of more The heaviest bows (hardest to pull) were As plate armour developed during the yards to see how effective these arrows of steel) but bounced back out again. The large dent than 80 joules of energy to the the war bows. These could be between 14th and 15th centuries, new, heavier really were. around the point of the plackart shows the heavy human torso is usually fatal. 110 and 180lbs in draw weight. arrow types were designed to try and punch through the curved iron plates. impact of the arrow. Further holes were achieved in The arrows which pierced this both the double and single layered parts of the target. breastplate hit with around John’s English Yew bow has a 130lb Mark’s Italian Yew bow has a The breastplate was fixed to a heavy bag of dried Each hole is accompanied by a dent and in most cases 150 Joules of energy, which draw weight at 32”. 140lb draw weight at 32”. beans, which was wrapped in a padded jacket. the armour flexed then sprung back, forcing the arrow would have knocked the wearer out of the hole it made. over and stopped his heart. If an armoured man was hit by The last of the broad bodkins was the heaviest at several arrows at the same time 102g, with a long lozenge-shaped head. This cleanly the flexing of his armour would penetrated the single layered armour at the centre of have catastrophic effect on him the target, the jack beneath and the bag of beans. even if it was not pierced. The arrow head cut to a depth of 1.25inches into A charging knight would add his the beans. own momentum to the energy As expected, the lighter long bodkin arrows, which were upon impact, making the effect designed to pierce mail armour, did not penetrate the even worse breastplate. The first one bounced off leaving a small With many thanks to Mark dent on the armour and a curled tip to the head, while Stretton and John Potter. the second shattered its shaft, bent the entire head and left a short but deep scrape in the armour..
Load more

Recommended publications
  • Heroic Armor of the Italian Renaissnace
    30. MASKS GARNITURE OF CHARLES V Filippo Negroli and his brothers Milan, dated 1539 Steel, gold, and silver Wt. 31 lb. 3 oz. (14,490 g) RealArmeria, Patrimonio Nacional, Madrid (A 139) he Masks Garniture occupies a special place in the Negroli Toeuvre as the largest surviving armor ensemble signed by Filippo N egroli and the only example of his work to specify unequivocally the participation of two or more of his broth­ ers. The armor's appellation, "de los mascarones," derives from the grotesque masks that figure prominently in its dec­ oration, and it was coined by Valencia de Don Juan (1898) to distinguish it from the many other harnesses of Charles V in the Real Armeria. Indeed, for Valencia, none of the emperor's numerous richly embellished armors could match this one for the beauty of its decoration. As the term "garniture" implies, the harness possesses a number of exchange and reinforcing pieces that allow it to be employed, with several variations, for mounted use in the field as well as on foot. The exhibited harness is composed of the following ele­ ments: a burgonet with hinged cheekpieces and a separate, detachable buffe to close the face opening; a breastplate with two downward-overlapping waist lames and a single skirt lame supporting tassets (upper thigh defenses) of seven lames each that are divisible between the second and third lames; a backplate with two waist lames and a single culet (rump) lame; asymmetrical pauldrons (shoulder defenses) made in one with vambraces (arm defenses) and having large couters open on the inside of the elbows; articulated cuisses (lower thigh defenses) with poleyns (knees); and half­ greaves open on the inside of the leg.
    [Show full text]
  • Armour As a Symbolic Form
    Originalveröffentlichung in: Waffen-und Kostümkunde 26 (1984), Nr. 2, S. 77-96 Armour As a Symbolic Form By Zdzislaw Zygulski Jr. „It is perfectly possible to argue that some distinctive objects are made by the mind, and that these objects, while appearing to exist objectively, have only a fictional reality." E. W. Said, Orientalism, New York 1979 Somewhere in the remote past of mankind armour was born, its basic purpose being to protect the soft and vulnerable human body in combat. It is somewhat surprising that in the course of Darwinian evolution man lost his natural protective attributes, above all hair, and slowly became what is called, with some malice, ,,the naked ape". Very soon man the hunter adopted animal skins as his first dress and also as armour. The tradition of an armour of leather is very ancient and still lingers in the word ,,cuirass". Various natural substances such as hard wood, plant fibres, bones, hoofs, or even tusks were used to make the body protection more resistant, but as soon as metallurgy had been mastered metal became the supreme material for all kinds of weaponry, both offensive and defensive. Since a blow to the head was often lethal, special attention was paid to the pro­ tection of that principal part of the body: early bronze helmets of conical shape are represented in the Sume­ rian art as early as the third millennium B. C.l. The shield, a prehistoric invention, although detached from the body and movable, may also be considered as a kind of armour. In the course of centuries a great number of types of armour and innumerable actual specimens were crea­ ted.
    [Show full text]
  • England's Armor
    ENGLAND’S ARMOR: HENRY VIII’S ARMOR AND HIS WARS by James Nobukichi Ito A thesis submitted in partial fulfillment of the requirements for the degree of Master of Art in Art History MONTANA STATE UNIVERSITY Bozeman, Montana April 2014 ©COPYRIGHT by James Nobukichi Ito 2014 All Rights Reserved ii DEDICATION I dedicate this Master’s Thesis to Donald La Rocca, Dr. Todd Larkin, and to Vaughan Judge for their support and guidance in helping me achieve my graduate goals. To Dede Taylor who gave me the Metropolitan Museum of Art Bulletin Of Arms and Men, which got me seriously interested in the topic of arms and armor as a Master’s Thesis. To my fellow graduate students; Kate Cottingham, Chelsea Higgins, Jackie Meade, and Jesine Munson. To the School of Art office staff. I dedicate the success of graduate school to my wife Stephanie, who tolerated me being away from home for these last two years researching and writing my thesis and for bringing our son Jefferson into this world while I was in graduate school. You are my greatest supporter, Stephanie. iii ACKNOWLEDGMENTS I have grown as a scholar and as a person in these last two years of graduate school and I have the art history faculty to thank for that. Todd Larkin was my committee chair and he has been my most involved mentor who pushed me to conduct active research and question all evidence of my findings to weave out any doubt that what I discovered was reliable information. He has also been an example to me as a scholar who is enthusiastic about his work and teaches in a way that keeps the class attentive and alive.
    [Show full text]
  • Tournament Gallery - Word Search
    HERALDRY Heraldry involves using patterns pictures and colours to represent a knight. Below is an example. Q: Why do you think heraldry was important to a knight? TOURNAMENT Design and GALLERY sketch your own coat of arms KEY STAGE 3 Self-Guided Visit Student Activity Handbook w w w w w w . r r o o Name: y y a a l l a a r r School: m m o o u u r r i i Class: e e s s . o o r r g g Date: © Royal Armouries The Tournament Gallery can be found on Floors 2 and 3 of the Museum. TUDOR TOURNAMENT ARMOUR DECORATION Q: In the Tudor period the tournament was highly popular. Name and describe Find the section in the gallery that describes different ways to the different games associated with the tournament? decorate armour. Q: Name the methods used to decorate these armours A B C D E Q: Why do you think knights and nobles decorated their armour? Q: Find a piece of decorated armour in the gallery sketch it in the box below and describe why you chose it. Armours were made to protect a knight in battle or in the tournament. Q: What are the main differences between armour made to wear in battle and tournament armour? 1 © Royal Armouries © Royal Armouries 2 FIELD OF CLOTH OF GOLD KING HENRY VIII Find the painting depicting the Field of Cloth of Gold tournament. Henry VIII had some of the most impressive armours of his time. To the right of the painting of the Field of Cloth of Gold is a case displaying an armour made for Henry VIII; it was considered to be one of Q: In which year did the Field of Cloth of Gold tournament take place? the greatest armours ever made, why do you think this was? Q: On the other side of the painting is an usual armour.
    [Show full text]
  • The Evolution of Plate Armor in Medieval Europe and Its Relation to Contemporary Weapons Development
    History, Department of History Theses University of Puget Sound Year 2016 Clad In Steel: The Evolution of Plate Armor in Medieval Europe and its Relation to Contemporary Weapons Development Jason Gill [email protected] This paper is posted at Sound Ideas. http://soundideas.pugetsound.edu/history theses/21 Clad in Steel: The Evolution of Plate Armor in Medieval Europe and its Relation to Contemporary Arms Development Jason Gill History 400 Professor Douglas Sackman 1 When thinking of the Middle Ages, one of the first things that comes to mind for many is the image of the knight clad head to toe in a suit of gleaming steel plate. Indeed, the legendary plate armor worn by knights has become largely inseparable from their image and has inspired many tales throughout the centuries. But this armor was not always worn, and in fact for most of the years during which knights were a dominant force on battlefields plate was a rare sight. And no wonder, for the skill and resources which went into producing such magnificent suits of armor are difficult to comprehend. That said, it is only rarely throughout history that soldiers have gone into battle without any sort of armor, for in the chaotic environment of battle such equipment was often all that stood between a soldier and death. Thus, the history of both armor and weapons is essential to a fuller understanding of the history of war. In light of this importance, it is remarkable how little work has been done on charting the history of soldiers’ equipment in the Middle Ages.
    [Show full text]
  • Ffib COSTUME of the Conquistadorss 1492-1550 Iss
    The costume of the conquistadors, 1492-1550 Item Type text; Thesis-Reproduction (electronic) Authors Coon, Robin Jacquelyn, 1932- Publisher The University of Arizona. Rights Copyright © is held by the author. Digital access to this material is made possible by the University Libraries, University of Arizona. Further transmission, reproduction or presentation (such as public display or performance) of protected items is prohibited except with permission of the author. Download date 08/10/2021 16:02:18 Link to Item http://hdl.handle.net/10150/348400 ffiB COSTUME OF THE CONQUISTADORSs 1492-1550 iss ' ' " Oy _ , ' . ' Robin Goon A Thesis Submitted to the Faculty of the DEPiRTMENT OF DRAMA In Partial Fulfillment of the Requirements For the Degree of ■ MASTER OF ARTS v ' . In the Graduate College THE UHIFERSITI OF ARIZONA 1962 STATEMENT BY AUTHOR This thesis has been submitted in partial fulfillment of re­ quirements for an advanced degree at The University of Arizona and is deposited in The University Library to be made available to bor­ rowers under rules of the Library. Brief quotations from this thesis are allowable without special permission, provided that accurate acknowledgment of source is made. Requests for permission for extended quotation from or reproduction of this manuscript in whole or in part may be granted by the head of the major department or the Dean of the Graduate College when in their judgment the proposed use of the material is in the interests of scholarship. In all other instances, however, permission must be obtained from the author. " / /? signed i i i Q-'l ^ > i / r ^ t.
    [Show full text]
  • The Classic Suit of Armor
    Project Number: JLS 0048 The Classic Suit of Armor An Interactive Qualifying Project Report Submitted to the Faculty of the WORCESTER POLYTECHNIC INSTITUTE in partial fulfillment of the requirements for the Degree of Bachelor of Science by _________________ Justin Mattern _________________ Gregory Labonte _________________ Christopher Parker _________________ William Aust _________________ Katrina Van de Berg Date: March 3, 2005 Approved By: ______________________ Jeffery L. Forgeng, Advisor 1 Table of Contents ABSTRACT .................................................................................................................................................. 5 INTRODUCTION ........................................................................................................................................ 6 RESEARCH ON ARMOR: ......................................................................................................................... 9 ARMOR MANUFACTURING ......................................................................................................................... 9 Armor and the Context of Production ................................................................................................... 9 Metallurgy ........................................................................................................................................... 12 Shaping Techniques ............................................................................................................................ 15 Armor Decoration
    [Show full text]
  • Armour & Weapons in the Middle Ages
    & I, Ube 1bome Hnttquarg Series ARMOUR AND WEAPONS IN THE MIDDLE AGES t Digitized by the Internet Archive in 2014 https://archive.org/details/armourweaponsinmashd PREFACE There are outward and visible signs that interest in armour and arms, so far from abating, is steadily growing. When- ever any examples of ancient military equipment appear n in sale-rooms a keen and eager throng of buyers invariably | assembles ; while one has only to note the earnest and ' critical visitors to museums at the present time, and to compare them with the apathetic onlookers of a few years J ago, to realize that the new generation has awakened to j j the lure of a fascinating study. Assuredly where once a single person evinced a taste for studying armour many | now are deeply interested. t The books dealing with the subject are unfortunately ' either obsolete, like the works of Meyrick, Planche, Fos- broke, Stothard, and others who flourished during the last L century, or, if recent, are beyond the means of many would-be students. My own book British and Foreign Arms and Armour is now out of print, while the monographs of I Charles ffoulkes, the Rev. Charles Boutell, and | Mr Mr Starkie Gardner are the only reasonably priced volumes j now obtainable. It seemed, therefore, desirable to issue a small handbook which, while not professing in the least to be comprehensive, would contain sufficient matter to give the young student, y the ' man in the street,' and the large and increasing number of persons who take an intelligent interest in the past just j that broad outline which would enable them to understand more exhaustive tomes upon armour and weapons, and 5 ARMOUR AND WEAPONS possibly also to satisfy those who merely wish to glean sufficient information to enable them to discern inac- curacies in brasses, effigies, etc., where the mind of the medieval workman—at all times a subject of the greatest interest—has led him to introduce features which were not in his originals, or details which he could not possibly have seen.
    [Show full text]
  • The Brigandine from the Polish Army Museum in Warsaw – Some Thoughts About Its Provenance and Chronology
    MARCIN GLINIANOWICZ THE BRIGANDINE FROM THE POLISH ARMY MUSEUM IN WARSAW – SOME THOUGHTS ABOUT ITS PROVENANCE AND CHRONOLOGY Polish museum collections do not possess a lot brigandine was placed on a shaped steel sheet (fixed of extant examples of late medieval armour, there- in place with several screws!), and covered with a fore each of them deserves special attention. The thin mesh overlapped and glued to the bottom side of brigandine from the Museum of the Polish Army in the base (Figs. 1–9). Because of this we are not able Warsaw has not been given a lot of attention so far to measure all of the plates, check for any marks on in Polish literature on the history of arms and armour. their surfaces or take a larger sample of the textile There is only a scant note about this armour in the covering for analysis. catalogue of the collections of the Museum of the Based on the pattern of rivet heads on the fabric Polish Army by Zofia Stefańska (Stefańska 1960, p. and the photos made before 1960 we can conclude 20; 1964, fig. 32: a, b). that the brigandine consists of a large chestplate and The brigandine in question is catalogued as inv. over 200 oblong, rectangular, horizontally aligned No. 107 and was brought into the Polish museum small plates of roughly uniform size (Fig. 10). The collection after WWII.1 There are indications that large chestplate has straight, horizontal upper and it formerly belonged to Berlin’s Zeughaus, which lower edges and almost vertical side edges with is corroborated by a comparative analysis of photos prominent, curved openings for arms.
    [Show full text]
  • Great Helms and Their Development Into Helmets
    Gladius XXIV, 2004, pp. 123-134 GREAT HELMS AND THEIR DEVELOPMENT INTO HELMETS POR ALAN WILLIAMS & DAVID EDGE ABSTRACT - RESUMEN This article shows the results from the analysis made on a group of helmets dated from late 12th century to early 15th century. Metallographic advances recorded on them are considered as determinating factors on its evolution. Este trabajo expone los resultados de los análisis realizados sobre un grupo de yelmos datados desde finales del siglo XII hasta principios del XV. Los avances metalográficos documentados en ellos se revelan como un factor clave en la evolución de estos yelmos. KEY WORDS - PALABRAS CLAVE Helms. Helmets. Metallography. Metallurgy. Yelmos. Cascos. Metalografía. Metalurgia. INTRODUCTION European knights of the 11th century wore a conical helmet with a nasal for head protec- tion; after about 1150 a round-topped version became increasingly popular, and after about 1180, a flat-topped version. From this date, all these types were sometimes fitted with a face- guard, to which was added a neck-guard, so that the conical helmet (which still remained in use) had evolved by around 1220 into a cylindrical headpiece, completely enclosing the head, called the «helm» (great helm, or «topfhelm» in German) which became the character- istic head protection for knights for a century or more. The helm was worn over a mail coif and arming-cap, and probably had internal padding. After 1250 the upper part often tapered slightly, and this became more pronounced after 1275. After around 1300 helms are shown with pivoted visors. They resemble the bascinet which appeared after 1300, and which was a helmet with the skull made in one piece, which might extend down to the shoulders, or only to just above the ears, and was sometimes fitted with a visor.
    [Show full text]
  • Pieza De La Armadura De Cabeza Bevor: Plate Armour for the Chin and Lower Que Cubre La Boca Y El Mentón
    ARMOUR BILINGUAL GLOSSARY NB: The terminology can be confusing as some terms could mean different things at different times. ARMADURA SUIT OF ARMOUR, HARNESS Barbera: pieza de la armadura de cabeza Bevor: Plate armour for the chin and lower que cubre la boca y el mentón. face, sometimes including a gorget. Brazal: parte de la armadura que protege el Vambrace: Entire arm armour except for brazo hasta la muñeca. Compuesta por tres the pauldron. The entire arm defence is piezas para el brazo (guardabrazo), el codo divided into upper and lower cannons. (codal) y el avambrazo. Rerebrace: Armor shielding covering the upper arm from the elbow to the shoulder. The rerebrace is also referred to as the upper cannon. Couter: Armoured elbow guards. Vambrace: Also used to refer to the arm defence for the forearm. Camisote: cota de malla formada por un Hauberk: Sleeved shirt of mail or scale tejido de anillos de hierro en forma de reaching down to the hip or knee. camisa, generalmente con mangas y falda Habergeon: Short sleeved shirt of mail or que pudiendo llegar hasta la rodilla. scale. Celada: pieza de la armadura de cabeza con Skull: Part of a helmet that covers the top, forma semiesférica que servía para cubrir y back and sides of the head above the ears. It defender la parte superior de la cabeza y la used to incorporate a comb (ridge on the nuca. Solía incorporar una cresta para skull of a helmet that runs from front to desviar los golpes tajantes. back) to deflect blows to the top of the head.
    [Show full text]
  • Vaguely Historical Armor for Classic D&D
    Vaguely historical armor for classic D&D For quick & easy purchasing—no more complex than standard classic D&D armor—use the table of “common sets” below. Just ignore the list of what makes up the suit—in parentheses—unless and until it becomes important. The prices are based on B/X, where they would be in gold pieces. In my Skylands campaign, the prices would be in silver. These sets are equal to or less expensive than buying the individual pieces. A “white harness” consists almost entirely of large steel plates. It must be custom itted to the individual. It cannot be combined with other armor except a shield. It is not readily available in the Skylands campaign. Where it is available, the price may vary. (The price, 250, in the table is the price of “suit armor” from the RC.) Common sets Price AC Description 10 8 Helmet 20 7 Light armor (Helmet & g ambeson) 40 5 Medium armor (Helmet, aketon, & hauber k) 50 4 Heavy armor (Helmet, aket on, hauberk, & brigandine) 60 3 Heavier armor (Helmet, aketon, hauber k, & cuirass) (250) 1 White harness The “individual pieces” table gives the price and AC adjustment for each individual piece of armor. Individual pieces Price AC modiier Description 10 -1 Shield 10 -1 Helmet 12 -1 Aketon (cannot be w orn with a gambeson) 15 -1 Gambeson (cannot be w orn with an aketon) 17 -1 Brigandine (cannot be w orn with cuirass) 20 -2 Hauberk 25 -2 Cuirass (cannot be w orn with brigandine) AC starts at 9 for an unarmored character.
    [Show full text]