New Products Special Offers July - September 2016

Specialist Tool Solutions

NEW PRODUCTS SPECIAL OFFERS JULY - SEPTEMBER 2016

www.sykes-pickavant.com Tel: 01543 679900 COOLING www.sykes-pickavant.com

COMBINED DEAL! 331595V2SP1 ‘315’ Series Cooling System Pressure Test Kit c/w Combustion Leakage Tester Provides an effective solution when pressure testing the cooling system to help locate internal & external leaks • Includes: - Hand Pump with Pressure Gauge & Quick-Release fitting + - Hose Assembly c/w quick-release fitting - 16 x Threaded cap adaptors - 3 x Bayonet Fitting cap adaptors - 1 x Cap Adaptor wrench • Includes Combustion Leakage Tester (33195000) for the OFFER €383.50 SAVE €127.50 fast and accurate diagnosis of cylinder head gasket leaks LIST PRICE €511.00 Note: Full application details can be found on our website: www.sykes-pickavant.com

331400V2SP COMBINED DEAL! XL Cooling System Pressure Test Kit c/w XL Combustion Leakage Tester Now covers more: DAF, Renault, Caterpillar, Optare, MAN, Dart, Komatsu, JCB, Volvo construction and agricultural vehicles • Includes: - Metal bodied hand pump with Pressure Dual Gauge & Quick-Release fitting + - Hose Assembly c/w quick-release fitting - 10 x Reservoir & Radiator pressure caps OFFER €354.95 • Includes XL Combustion Leakage Tester (33145000) SAVE €191.55 for the fast and accurate diagnosis of cylinder head gasket leaks LIST PRICE €546.50

31370000 FOR BOTH PETROL & DIESEL ENGINES 53401500 Combined Petrol & Diesel Cylinder Leakage Tester Kit Fortron Coolant Flush Machine • Provides a direct indication to the location of the leak • Effective way of flushing and exchanging the by measuring the rate of loss of compression for complete cooling system fluid individual cylinders €359.50 • Suitable for all types of • Helps to diagnose worn / broken coolants & vehicles piston rings, burnt / leaking valves • Includes a set of and faulty head gaskets multi-application • Includes a selection of glow adaptor fittings plugs and an adjustable • Air operated and dummy injector portable • Supplied with M12 and • Synchronised M14 brass quick release operation – spark plug adaptors Provides a controlled flow of 31370500 new fluid under Petrol only Cylinder Leakage Tester Kit €218.80 pressure and draws • As per kit above excluding glow plugs & dummy injector old fluid out of system using adjustable vacuum 33147800 33159800 HGV Cap Adaptor Cooling Cap Adaptor Set Dennis / Optare • Set of 2 cap adaptors to update • Optional Cap Adaptor for use 331595V2 kit (above) with 33140000 kit and 331400V2 kit €70.95 (above) €2832.95 Fluid Accessories Applications: Dennis Dart PSV’s / Applications include: Part No. Description Price Optare Solo PSV’s BMW, Chevrolet, Mini, Saab & Vauxhall 53401600 Coolant Flush Treatment Additive €16.50 and related models €56.33 Note: Full application details can be found on our website: www.sykes-pickavant.com Coolant Flush Treatment Additive - 12 Pack also available (534016-12)

1 WORKSHOP TOOLS

03202500 325200SP MADE IN THE UK Start / Stop Battery & Electrical Portable 4 Gas Analyser with Printer System Analyser • For fault diagnosis, tuning and pre-MOT testing • Tests 6V-12V batteries and • Truly portable hand-held gas analyser - Ultra light weight - only 1.1kg 12V-24V volt charging & • Measures CO, HC, CO2, O2 (NOx model option starting systems available on request) to Class 1 accuracy • Digital screen with • Suitable for both petrol and LPG vehicles and ideal integrated printer for both static and dynamic testing • Operating range: • Internal memory stores up to 250 test results 40-2000 CCA • Up to 4 hours internal battery life • Bad connection warning • Provides Lambda / AFR measurement & corrected CO • Tests EFB, VRLA / GEL, • Pump speed control - Improves battery life AGM Flat Plate, AGM Spiral • Bluetooth connectivity to PC (Free analytical software available to download) and regular liquid batteries in seconds • Includes printer • Rating system: INCLUDES OFFER €397.50 and AC / 12v SAE (CCA) / DIN / EN / INFRA-RED WORTH SAVE €28.45 chargers €2122.95 IEC & JIS LIST PRICE €425.95 PRINTER €420.00!

01493500 Digital LCD Circuit Tester • Suitable for 6, 12 and 24v systems • LED indication for power (red) and ground (green) • Features crocodile clip with spring cable extendable to 3 metres €37.50 • Stainless steel probe • Small testing current <10mA

69018500 Ratcheting Crimping Plier for Insulated Terminals • Steel construction with hardened & tempered jaws OFFER €29.95 • Ratchet action ensures consistent tension when crimping SAVE €8.55 • Suitable for terminals: 0.5 - 1.0mm / 1.5 - 2.5mm / 4.0 - 6.0mm LIST PRICE €38.50

03275000 IDEAL FOR USE ON OFFER €28.50 VW FUEL FILTER PIPE CLIPS SAVE €7.00 Two Way Hose Clamp Plier LIST PRICE €35.50 • For use on radiator clamps, fuel line clamps, tank ventilation line clamps and bearing clips • Intersected slot design ideal for use in confined spaces • 16mm wide head more effectively grips hose clamp compared to general 9mm head pliers

04551000 88050000 €113.50 11 Pc. Non Marking Trim Tool Set 1/2” Impact Bar • Professional set of strong, • For loosening rusted or seized flexible plastic angled, bolts using impact force lever and panel pullers • Produces 8 x torque multiplication with • Reduces risk of each hammer blow damaging / scratching • Use with impact sockets and driver bits surfaces compared to • Bi-directional – use to loosen or tighten fasteners general 9mm head pliers • Swivel head aids with Part No. Description Price operation in limited access 53401600 Coolant Flush Treatment Additive €16.50 situations €24.00 • Impact absorbing composite handle

2 Tel: 01543 679900 HGV www.sykes-pickavant.com

HGV Split Bush Kits 18797000 NEW For the removal and installation of split / spring eye bushes on HGV vehicles • Uses a unique clamping system and a series of shells for a range of bush sizes from 56mm Dia to 75mm Dia. • When used with a hydraulic pump (20017000) the kit allows the operator to work in a limited access environment and so reduce the amount of disassembly work required

Part No. Description Price 18798000 Split Bush Kit - Basic (Clamp Assembly & Shells 1-9) €531.00 Applications: 18799500 Split Bush Kit - MB / DAF - Basic (Clamp Assembly & Shells 1 & 6) €276.95 Mercedes Benz, MAN, MAN Front Spring, IVECO Eurostar, 187970-01 Clamp Assembly €211.50 Mercedes Benz Actros, Atego, DAF and Volvo 18797100 Shell 1 (75mm) - Mercedes Benz €42.50 18797200 Shell 2 (70mm) - MAN €42.50 18797000 Split Bush Kit - Master 18797300 Shell 3 (68mm) - MAN Front Spring €42.50 • Comprehensive kit includes clamp assembly, 18797400 Shell 4 (66mm) - IVECO Eurostar €42.50 9 x shells - 56mm / 58mm / 60mm / 63mm / €1057.95 18797500 Shell 5 (65mm) - Mercedes Benz Actros, Atego €42.50 65mm / 66mm / 68mm / 70mm / 75mm plus 18797600 Shell 6 (63mm) - DAF €42.50 hydraulic components 18797700 Shell 7 (60mm) - Mercedes Benz / IVECO Eurostar €42.50 18797800 Shell 8 (58mm) - Mercedes Benz / Volvo €42.50 18799000 Split Bush Kit - MB & DAF 18797900 Shell 9 (56mm) - IVECO Eurostar €42.50 • Includes clamp assembly, 2 x shells - 63mm and 75mm plus hydraulic components €702.95 A full list of components is available on our Scan the QR code to watch website. Please visit: www.sykes-pickavant.com an overview video of the HGV Split Bush Kit Note: Part kits also available - see table for details

Hydraulic Aluminium Pumps • Portable & lightweight aluminium bodied hydraulic pumps fitted with gauge, hydraulic heavy duty hose and ¾” hydraulic coupler • Pressure Rating: 10,000 psi / 700 bar • Designed for use with single acting cylinders • Automatic overload relief valve protects hydraulic components NEW

20017000 20017500 Hand Operated Pump Air Powered Pump • Automatic two speed operation • Foot pedal control - High flow for low • Unique inlet and outlet design resistance and low OFFER €614.95 features a low noise exhaust OFFER €610.50 flow for high SAVE €42.55 system SAVE €28.45 resistance LIST PRICE €657.50 LIST PRICE €638.95

800400SP INCLUDES FREE CASE ‘Motorq 400’ - 3/4” Push-Thru Heavy Duty Torque Wrench • 150 - 700 Nm / 100 - 500lbs.ft €570.95 • Length: 1150mm • Weight: 6.30kg

800500SP INCLUDES FREE CASE ‘Motorq 500’ - 3/4” Push-Thru Heavy Duty Torque Wrench • 300 - 1000 Nm / 200 - 750lbs.ft €585.00 • Length: 1475mm • Weight: 7.30kg

800550SP INCLUDES FREE CASE ‘Motorq 550’ - Stepped 3/4” to 1” Heavy Duty Torque Wrench • 1” Sq. Dr (uses ¾” to 1” stepped convertor) • 700 - 1500 Nm / 500 - 1000lbs.ft €877.50 • Length: 1475mm • Weight: 10.40kg

3 FLUID HANDLING

New Range of AdBlue Transportation Tanks AVAILABLE IN TWO TANK SIZES • For transportation and refuelling of AdBlue equipped vehicles 68L & 110L • Ideal for car, van, light commercial, agricultural, construction and heavy commercial workshops • Impact resistant polyethylene tank, UV stabilised and equipped with wheels suitable for easy transportation NEW • Available in two tank sizes - 68L for small workshops & 110L for large workshops • Horizontal filling operation • Vented filling plug

Tank Empty Part No. Description Type Hose Price Weight 4m 36610100 AdBlue Transport Tank - 68L Plastic manual rotary pump 11kg €566.50 Manual Pump with plastic manual nozzle EPDM 4m 36610300 AdBlue Transport Tank - 68L Plastic manual rotary pump 10kg €495.50 Manual Pump with stainless steel spout & plug PVC 4m 36610500 AdBlue Transport Tank - 68L 12v DC pump - 30L/Min 16kg €844.95 12v DC Pump with plastic manual nozzle EPDM AdBlue Digital Hose End Suitable for use with 36601000 Meter above models -- €282.50 3m 36611000 AdBlue Transport Tank - 110L 12v DC pump - 30L/Min 12kg €1498.00 12v DC Pump with “Piusi” digital nozzle EPDM

34400500 6 BAR 36600500 STAINLESS STEEL 45L TANK 240v Electric Brake Bleeder Fuel Extractor / Retriever • One man operation for brake & • Retrieve fuel following a filling error, removal of clutch bleeding tank sender unit, changing or checking the fuel • Compatible with ABS systems gauge, rinsing the fuel tank during body work etc • Rugged impact resistant • Emptying via tank filler neck or fuel lines moulded housing • Long supply hose (3.2m) €595.00 • Weight: 10kg 36600700 • Adjustable pressure output from Adaptor Set 0 - 6 bar to suit vehicle • Set of fittings to connect in line, before the injection • Large internal storage area for brake pump (on most fuel fluid containers up to 10L systems) for safe emptying • Includes aluminium SP Euro cap - of fuel angled screw type for popular OFFER €674.50 vehicle connection SAVE €34.00 LIST PRICE €708.50 €35.50 Additional range of caps also available

IDEAL FOR VEHICLES 53390000 Pneumatic Oil Extractors WITHOUT A SUMP PLUG Designed to meet the requirements of the modern Pneumatic Oil workshop as well as health & safety issues Extractor • Remove / extract waste fluids or oil from an engine 53390500 €387.75 • Combined volume capacity of 90 litres (70L tank & Pneumatic Oil Extractor 20L drain bowl) with 9 Litre Inspection • Works best at oil temperatures between 40-60° Chamber with suction speeds of up to 6 litres per minute • Visible fill level indicator • Includes inspection chamber • Working pressure 8-10 Bar providing visual assurance • Powered from compressed air that the suction facility is • Empty tank with compressed air at max. 1 bar operating correctly pressure • Waste oil becomes immediately • Includes: visible in the chamber allowing - Adaptors for BMW, Mercedes, VW and Citroen the user easy assessment of the oil - 4 x 700mm nylon tube probes with internal spring • Includes anti steel anti-kink wires splash device €495.00 - 2 x 700mm steel probes WARNING: Do not use with corrosive or inflammable products

4 Tel: 01543 679900 TORQUE www.sykes-pickavant.com

OFFER €129.50 OFFER €159.50 80002000 SAVE €28.00 80006000 SAVE €28.00 ‘Motorq 20’ - 3/8” Push-Thru LIST PRICE €157.50 ‘Motorq 60’ - 3/8” LIST PRICE €187.50 Torque Wrench Push-Thru Torque Wrench • 3/8” push thru sq dr • 3/8” push thru sq dr • 4 - 20 Nm / 40 - 180lbs.in • 8 - 60 Nm / 5 - 45lbs.ft • Length: 210mm • Length: 310mm • Weight: 0.36kg • Weight: 0.66kg

80010000 OFFER €159.50 SAVE €28.00 ‘Motorq 100’ - 3/8” Push-Thru Torque Wrench LIST PRICE €187.50 • 3/8” push thru sq dr • 20 - 100 Nm / 15 - 80lbs.ft • Length: 355mm • Weight: 0.73kg

80020000 OFFER €185.00 SAVE €29.50 ‘Motorq 200’ - 1/2” Push-Thru Torque Wrench LIST PRICE €214.50 • 1/2” push thru sq dr • 40 - 200 Nm / 30 - 150lbs.ft • Length: 445mm • Weight: 1.01kg

80030000 OFFER €205.00 SAVE €30.50 ‘Motorq 300’ - 1/2” Push-Thru Torque Wrench LIST PRICE €235.50 • 1/2” push-thru sq dr • 60 - 300 Nm / 40 - 220lbs.ft • Length: 575mm • Weight: 1.40kg

80033000 OFFER €210.00 SAVE €49.95 ‘Motorq 330’ - 1/2” Push-Thru Torque Wrench LIST PRICE €259.95 • 1/2” push-thru sq dr • 60 - 330 Nm / 40 - 240lbs.ft • Length: 684mm • Weight: 1.52kg

80039900 OFFER €320.00 SAVE €46.50 ‘Motorq 399’ - 3/4” Push-Thru Torque Wrench LIST PRICE €366.50 • 3/4” push-thru sq dr • 80 - 400 Nm / 60 - 300lbs.ft • Length: 684mm • Weight: 2.10kg

80093500 OFFER €139.50 SAVE €73.45 Universal Digital Torque Angle Gauge LIST PRICE €212.95 • For turning torqued fasteners through a further angle, as per vehicle manufacturers’ specifications • Simple to use: Calibrate, set angle, mount and use • Magnetic attachment • One single tool can be used on 1/4”, 3/8”, 1/2”, 3/4” drives • Fits onto most ratchets, torque wrenches and power bars • Indicates increasing angle on LCD display • Works in both directions of rotation • Audible notice when setting reached • LED’s glow red when setting exceeded

5 AIR TOOLS

COMBINED DEAL! IDEAL FOR CUTTING BEARING CASES 902130SP & LOCKING WHEEL NUTS Micro Die Grinder c/w Bit Set • Includes Micro Die Grinder Bit Set (90213500) containing five shaped ends suitable for precision work • Powerful mini device for small / fine grinding & milling • 1/8” drive / 70,000rpm €254.00 • Ideal for work in confined spaces + 90206000 BESTSELLER ‘Vibro-Impact’ Air Hammer • A unique concept to aid the removal of seized suspension parts • The ‘Vibro-Impact’ system allows for the controlled application of force via an air powered impact hammer • Allows the operator to control & gradually increase the force being applied, in order to loosen seized components • Features a built-in shock-absorber in order to OFFER €379.00 minimise risk of damage if too much pressure SAVE €96.50 is accidentally applied LIST PRICE €475.50 • Low vibration for user comfort

90233000 NEW 90225000 NEW ‘Vibro-Impact’ Soft End Hammer Set ‘Vibro-Impact’ Pin Set - 6 Pc. • For use with ‘Vibro-Impact’ air hammer (above) • Sizes: 5.2mm, • Includes: OFFER €42.50 6.5mm, 6.9mm, - Adaptor shaft SAVE €42.50 7.7mm, 9.3mm - Five hammers: LIST PRICE €85.00 and 12.7mm 38mm: Medium flat 29mm: Track rod, aluminium, copper €56.50 and thermoplastic

90229000 NEW ‘Vibro-Impact’ Socket Set - 7 Pc. • Designed to untighten seized screws, nuts or glow plugs without any damage • To be used with ‘Vibro-Impact’ air hammer (see above) • Vibro-shaft 3/8” square drive • Suitable for bolts, screws, rounded lugs, glow plugs, clamp-on injectors €127.50 • Special impact sockets with internal edge: 8, 9, 10, 11, 12, 13, 14mm

High Quality Air Tools that set the standard for Torque! Impact Wrench Specifications: Max Torque Nm Torque Nm Noise Air Consumption Weight Part No. Drive (Reverse) (Fwd) (dBA) (l / min) (kg) Price 90201000 1/2” 1600 1084 94.2 135 1.8 €249.50 90201500 (Mini) 1/2” 680 500 93.5 130 1.08 €239.95 90201300 (Ultra-Short) 1/2” 680 500 95 134 1.3 €225.95 90202000 3/4” 2600 2000 97 210 3.2 €708.50 90202500 3/8” 680 500 93.5 130 1.08 €254.00 90203500 1/4” 90 90 98.2 105 0.9 €197.50 90204500 1” 3100 2200 110 305 6.8 €975.00

6 Tel: 01543 679900 INJECTOR SERVICE & REMOVAL www.sykes-pickavant.com

18590000 NEW Injector Extractor Kit with Hydraulic Cylinder • Universal kit complete with hydraulic cylinder for removing seized fuel injectors. Note: Pump not included (20017000) • Hydraulic cylinder with 10 tonnes of force €1775.00 • Can be used as a mechanical kit for confined spaces - i.e. against a bulkhead • Can be used as a hydraulic kit for maximum power to help release tightly seized injectors • Suitable for the extraction of diesel fuel injectors specifically: M17 x 1.0 for Bosch, M14 x 1.0 for Delphi, M16 x 1.0 for Toyota adaptor, M20 x 1.0 for Denso and M25 x 1.0 / M27 x 1.0 for Siemens • Can be used in-situ saving time and expense • Adjustable supporting feet allow for angle and position setting • Main side and top bars allow for various engine configurations

BESTSELLER 08552000 NEW 53403500 Injector Extractor Kit - PSA Group Fortron Injector Max Machine • For removing injector nozzles on Simple and effective method of cleaning 2.0HDI and 2.2HDI - PSA group both petrol and diesel fuel • Removes tightly fixed injector systems without the removal nozzles without dismantling the of injectors from the vehicle cylinder head • Injectors (Bosch / Siemens) can INCLUDES: be removed simultaneously • Comprehensive Adaptor Set • Includes bracket and 6 x screws • FREE leaflets & dispenser • Suitable for Peugeot, Citroen, Fiat & Lancia • Access to the Fortron-Zone forum • Engine Codes: €708.50 • Listing on the Injector Max DW10: RTH, RHW, 4HW, Garage Directory as RHT, RHM, RHR, RHK featured on our website DW12: 4HX, 4HZ, 4HW, 4HY, 4HT, 4HS, 4HP, 4HR, 4HN €2832.95 08555000 NEW Injector Extractor Kit - Toyota • To aid the removal of seized / 31487900 Inline ‘T’ Connector NEW stubborn Denso injectors • Designed to connect or ‘T’ in between the vehicles • Parts of the kit can be own fuel delivery lines and allows the ‘red’ fluid €49.50 mounted together around an output hose to connect, so that RTG additive can be administered into tricky engines where regular connection injector creating a stable does not allow an engine to run mount for the slide hammer to fix onto - Compact slide Fluid Accessories hammer allows for use on an engine in-situ Part No. Description Price • Suitable for Toyota, Nissan, €425.95 53403600 Petrol System Cleaning Fluid €26.50 Mazda, Opel / Vauxhall and Lexus 53403700 Diesel System Cleaning Fluid €26.50 Denso Injectors: 53403800 Vactek Fluid Bottle €17.00 - 23670 - 30080 - MB416600 - MB40A 53403900 Induction Service Kit - Petrol (Aerosol) €17.00 - 5870 - 13H50B 53404000 Induction Service Kit - Diesel (Aerosol) €24.95 - 11L 12182 - 23670 - 26011 53404300 Induction Service Kit - Petrol (Pouring Fluid) €24.95 - 23670 - 0R050 - 10J 06798 12 Packs are available for all Fortron Fluid accessories. Ask your Distributor for details

7 INJECTOR SERVICE & REMOVAL

18584000 Universal Injector Vibration Tool • Specially designed tool to assist in the removal of stubborn injectors • To be used in conjunction with any suitable injector puller or slide hammer • Includes universal clamp to attach to pulling spindle or injector NEW pulling adaptors where space allows • The main body can be rotated to 4 positions on the horizontal and 4 positions at an angle • Fully adjustable clamp and can be used with or without the tension springs provided • Can be attached and locked in place with the two adjustable locking handles • The tool can be used whilst the injector is under hydraulic / mechanical tension or before tension is applied • The tool can also assist in other pulling applications

€637.50

08585000 Heavy Duty Slide Hammer Injector Removal Kit • For the removal of Bosch, Delphi Denso and Siemens injectors • Features a flexible u-joint adaptor for access in restricted areas OFFER €298.50 • Includes 6 x Injector adaptors, 4 x Injector Solenoid removers and SAVE €120.45 2 x Nozzle Extractors LIST PRICE €418.95

FREE! DIESEL INJECTOR SEAT 185800V2P1 FREE! CLEANER SET (017500V2 - WORTH €310.95 See page 11 for details) Hydraulic Injector Puller Kit c/w WHEN YOU PURCHASE 185800V2P1 Hydraulic Pump and FREE Diesel Injector Seat Cleaner Set • Provides controlled force to aid the removal of seized / OFFER €1795.00 stubborn injectors where there is insufficient access for SAVE €593.50 LIST PRICE €2388.50 traditional slide hammers • Includes a multi-position frame, with adjustable legs of different lengths and a selection of mounting adaptors to allow alignment of the tool with the injectors on a wide variety of modern diesel engines • Supplied with injector adaptors for most modern injector types • 10 tonnes Hydraulic Hollow Cylinder provides the force • Includes aluminium bodied hand pump - 2 Speed, 10,000psi fitted with gauge, hydraulic hose and ¾” hydraulic coupler

185800V2 185810V2 Hydraulic Injector Mechanical Hydraulic Injector Puller Kit only Puller Kit • As per 185800V2P1 (above) • As per 185800V2 kit (left) but excluding hydraulic pump and includes a mechanical hydraulic ram free Diesel Injector Seat • Allows use of the kit without the need for a separate hydraulic pump OFFER €1295.00 Cleaner Set €1250.00 SAVE €408.95 LIST PRICE €1703.95

8 Tel: 01543 679900 DIESEL GLOW PLUG www.sykes-pickavant.com

085900V2 Vibro Impact Glow Plug Remover Set Square Drive ¼” • For the removal of 8, 9, 10, 11 & 12mm glow plugs Max Torque - Right 40Nm • Uses controlled impact torque to create vibration Max Torque - Left 10 / 20 / 30 / 40Nm • Includes 4 low-torque settings for controlled vibration Air Inlet ¼” (10, 20, 30, 40Nm) Air Consumption 250 ltrs / min • Supplied with special long-reach 8, 9, 10, 11 & 12mm OFFER €278.50 Speed 12,000 per min glow plug sockets, long and short extensions and universal SAVE €90.50 Air Supply 6.3bar / 90psi joint for ease of access LIST PRICE €369.00

NEW 08594000 Universal Glow Plug Removal Master Kit • Complete set for removing broken glow plugs: M8 x 1.0, M9 x 1.0, M10 x 1.0 and M10 x 1.25 • Kit includes 4 x special milling cutter tools (3 pcs with 4 cuttings and 1 pc with 2 x cuttings) with self-centering helicoidal tip for universal use - Individual centering adaptors are not required • Quick and easy removal - also allows the user to restore the thread for installation of the new glow plug €1205.50

Specifications: Dimension A ≥ 14mm (M10) Dimension A ≥ 20mm (M9, M8) Dimension L ≤ 13mm L (thread)

Universal Glow Plug Removal Kits 4 x special milling cutter tools with self-centering twist drill bit for universal use without the need for any dedicated centering aids NEW Part No. Glow Plug Size Dimension A ≥ Dimension L ≤ Price M10 x 1.0 / 08594100 14mm 13mm M10 x 1.25 €688.50 08594900 M9 x 1.0 20mm 13mm €518.50

08594800 M8 x 1.0 20mm 13mm €518.50

08596000 Glow Plug Tip Extraction Kits - NEW M8, M9 & M10 NEW Universal Glow Plug Tip Extraction Suitable for removing the final part of the electrode in case Master Kit of breakage / seizure of the glow plug inside its seat • Complete kit for glow plugs electrode extraction: M8 x 1.0, M9 x 1.0, M10 x 1.0 and M10 x 1.25 08596100 • Includes all the necessary tools Glow Plug Tip Extraction Kit (9 x extraction rods, - M10 x 1.0 4 x glow plug guides • Suitable for M10 and 1 x slide thread size hammer) to €197.50 safely remove 08596800 the terminal part of the glow Glow Plug Tip Extraction Kit - M8 & M9 plug electrode • Suitable for M8 sized glow plug tips without damaging • Also suits M9 glow plug tip the cylinder head removal by using the same M8 size in the slightly larger M9 female thread of the cylinder head UNIVERSAL KIT €390.50 €197.50

9 DIESEL GLOW PLUG & ENGINE SERVICE

08597000 €347.95 Universal Glow Plug Reamer Kit NEW • For cleaning the glow plug shaft and the sealing seat in the cylinder head • Includes thread sizes: M8 x 1.0, M9 x 1.0, M10 x 1.0 and M10 x 1.25 Glow Plug Reamers Part No. Glow Plug Size Price 08597800 M8 x 1.0 €134.95 08597900 M9 x 1.0 €134.95 08597100 M10 x 1.0 / M10 x 1.25 €134.95

08595300 UNIVERSAL KIT NEW Glow Plug Repair Kit • Complete kit for repairing glow plugs and spark plugs • Glow Plug Sizes: M8 x 1.0, M9 x 1.0, M10 x 1.0, M10 x 1.25 and M12 x 1.25 • Spark Plug Sizes: €660.50 M12 x 1.25 and M14 x 1.25

OFFER €532.95 31467500 MADE IN THE UK 31467000 SAVE €35.00 Diesel Fuel System Bleeding Kit Diesel Fuel System LIST PRICE €567.95 • Designed to allow the user to bleed / Bleeding Kit prime the low pressure feed side of Master Kit the diesel fuel system • Includes 31467500 kit (left) • Contains common sized low pressure plus a low pressure fuel pipe sets including: gauge (10bar), tee piece - Standard 8mm, 10mm and newer and ratchet pump 9.65mm (3/8 inch) • Gauge and tee piece - Renault small & large - Ford enables the same pipes to • Typical coverage includes: be used for both bleeding Citroën, Fiat, Ford, Land Rover, OFFER €212.95 and fuel pressure Peugeot, Renault, Volvo & Vauxhall SAVE €71.00 • Clear pipes for visability of air bubbles LIST PRICE €283.95

38360000 OFFER €284.00 08529500 OFFER €92.00 SAVE €78.00 SAVE €56.00 LIST PRICE €362.00 Universal Engine & Gearbox Support Seal Removal & LIST PRICE €148.00 • Designed to support the engine or gearbox when the Replacement Kit engine mountings have been removed - e.g. When • Remove & install awkward seals as found on replacing timing / drive engines, gear boxes, power steering pumps etc belts, water pumps etc • Universal coverage for seals 27-58mm diameter • Designed for all makes • Includes seal puller, long & short extracting hooks of vehicle - No need for for seals - e.g. on camshafts or crankshafts costly model specific brackets and a selection • The unit is suspended from of bushes, the chassis via the support hooks, sleeves and the engine / gearbox is supported by the support pad and is mandrels for counter-balanced against the underside of the vehicle by the installing new support arms seals • Fully adjustable in all dimensions: - Extension: Min 630mm / Max 960mm - Support Plate Adjustment: 190mm

10 Tel: 01543 679900 ENGINE SERVICE www.sykes-pickavant.com

OFFER €239.50 017500V2 SAVE €71.45 Diesel Injector Seat Cleaner Set LIST PRICE €310.95 SIMPLY THE BEST... • Cleans injector seats and chambers when changing or reconditioning diesel injectors • Helps to avoid blow-back due to poorly seated injectors • Includes: Removal tool for copper washers, injector blanking plugs, wire brush cleaning set and centralising stem

OFFER €49.50 03430900 07759700 SAVE €13.00 10 Pc. ATF Refill Adaptor Set Universal Timing Gear Holder LIST PRICE €62.50 • Includes set of 10 adaptors for • Single lever design enables topping-up sealed transmissions quick and easy use • Suitable for a variety of vehicles including: • Provides breaker bar Audi, BMW, Ford, Honda, Mercedes, Nissan, strength for maximum holding force Toyota, Volvo and VW €99.50 • Allows adjustment of cam gear once installation is complete

03860000 08550500 Strap Type Oil Filter Remover - For all filters up 5th Gear Puller - Ford to 300mm diameter • A quick & simple method of • Multi-purpose strap wrench, ideal removing the fifth gear on Ford FWD for all oil filters up to 300mm transmissions, before carrying out OFFER €98.90 circumference internal repairs SAVE €43.15 • Range: 20 to 300mm diameter Applications: LIST PRICE €141.95 • Strap Length: 1 metre long & 40mm wide - Ford IB5 Gearbox: - Ford VXT-75 Gearbox: OFFER €24.95 Fiesta / Ka / Focus Galaxy / Transit / Transit Connect • Double ended 13/16” hex c/w SAVE €24.55 - Ford MTX-75 Gearbox: 3/8” & 1/2” sq. dr LIST PRICE €49.50 Focus / C-Max / Mondeo / Jaguar X Type

53402500 ALLOWS FOR UNATTENDED OPERATION 53404500 Fortron Automatic Transmission Fortron Power Steering Fluid Flush Machine - Fully Auto Flush Machine • Can replace up to 100% of transmission fluid • Replaces 100% of • Specify exact amount of fluid to change steering fluid • Digital control panel allows for fully • Takes on average automated control 10 minutes per • Safely cleans up and extends the service life service of automatic transmissions • Extends the service • Includes comprehensive €4962.95 life of (often adaptor set overlooked) system • Revitalises and conditions ‘o’ rings 53405500 and seals Fortron Automatic Transmission Fluid Flush €1412.95 Machine - Manual • Manual controls for ATF exchange process • Complete fluid exchange, including cooler, converter and cooler lines • Includes range of Fluid Accessories fittings and adaptors Part No. Description Price €3122.50 53404600 Power Steering Flush Service Kit €16.50 Fluid Accessories Part No. Description Price 12 Packs are available for all Fortron Fluid 53402600 ATF Flush Service Kit €16.50 Accessories. Ask your Distributor for details Further details of the Fortron range can be found on our website: www.sykes-pickavant.com

11 SUSPENSION WORKSTATIONS SIMPLY THE BEST... SPRINGS HAVE EVOLVED...HAVE YOUR TOOLS?

AUTOMATIC JAW LEVELLING PIVOTS TO COMPENSATE & HOLD ALL COIL SPRINGS INCLUDING LEFT HAND COILS

INTERCHANGEABLE JAWS / VICE FULL HEIGHT STEEL SAFETY GATES TO SUIT DIFFERENT SPRINGS

LENGTH OF TRAVEL: 330MM

SAFETY SWITCH PREVENTS OPERATION WHEN GATES ARE OPEN TOP ARMS & JAWS ADJUST AND LOCK TO SECURE SPRING

ADJUSTABLE STRUT VICE WITH 4 x SETTING OPTIONS UNIQUE DOUBLE DEPTH FRONT PLATE ALLOWS SAFE WORK ON EXTRA-LONG STRUT ASSEMBLIES

UP TO 2452KG OF FORCE (AT 10 BAR) AT THE PRESS OF A PEDAL 4 x FLOOR MOUNTING HOLES FOR INSURANCE COMPANY COMPLIANCE

385800SP OFFER €2264.95 HEAVY DUTY PNEUMATIC COIL SPRING COMPRESSOR WORKSTATION SAVE €213.00 Universal piece of equipment for assembling and disassembling struts and coil springs on cars, LIST PRICE €2477.95 4WD’s and LCV’s. Includes 2 x standard brackets (78-130mm / 125-205mm) and 1 x strut vice ADAPTOR BRACKET SET (38780100) INCLUDES Suitable for Mercedes C Class (W203) up to 2007 Compatible with new range of Mercedes brackets - FREE WORTH €227.00 38480800 / 38480900 / 38481000

08921000 38480200 €60.95 39 Pc. Universal Shock Absorber Upper Jaw Set Tool Set • For high compression and close coil springs • Enables the piston rod to be held whilst (Toyota / Honda etc) allowing the nut to be loosened / tightened • Includes - 2-tap & slot-profile socket - D-profile / Slotted / T-profile bits 38480800 NEW - 6-pt sockets & bits Mercedes Bracket - M12 - XZN bit • For: Mercedes C Class • Ideal for use (W204) 2008-2014 and with 3858 E Class Coupe (W207 / Part No. Description Price compressor C207) 2009 onwards 53404600 Power Steering Flush Service Kit €16.50 workstation - Front springs OFFER €227.00 €212.95 MADE IN THE UK SAVE €28.50 LIST PRICE €255.50

12 Tel: 01543 679900 SUSPENSION WORKSTATIONS www.sykes-pickavant.com THE BEST SPRING PROGRAMME ON THE MARKET

385800-60 385800-61 Workstation Arm Extender - Pair Workstation Swivel Jaws - Pair • Mounts between original top • Mounts onto top arms in place of standard arm and jaw attachment top jaws & contacts directly onto spring • Use to extend the length of the • Jaw ‘floats’ to follow changes in spring top spring mounting jaw position angle / profile during compression • Can be used singly to provide • Constant contact with the coil spring 10mm extension or as a pair for surface area for increased safety 20mm ext • Able to work on both left and right handed coil springs when used in conjunction with brackets below €99.50 €212.95 MADE IN THE UK 38580200 €141.95 38580400 Jaw Holder Coil Spring Clamp • For use with 3858 & 3868 workstation brackets • Tool to secure coil spring • Includes 3 x hanging hooks and 4 x slots for brackets into lower bracket

• Designed to hold the coil spring still during initial compression and restrict twisting through the €70.95 bracket

38480400 38480500 38480600 Special Bracket Special Bracket Special Bracket • For VW Touareg / • For Mercedes • For Nissan Qashqai Porsche Cayenne C Class 2010- €141.95 €255.50 €170.50

38480900 MADE IN THE UK NEW 38481000 MADE IN THE UK NEW Mercedes Bracket Mercedes Bracket • For Mercedes C Class (W205) • For Mercedes ML Class 163 2015 onwards 1997-2005 - Front springs OFFER €227.00 - Rear OFFER €227.00 SAVE €28.50 springs SAVE €28.50 LIST PRICE €255.50 LIST PRICE €255.50

38480700 38780100 NEW Double Depth Strut Vice Adaptor Bracket Set • For use with extra long strut assemblies • Suitable for Mercedes C Class • Chrysler Voyager (W203) up to 2007 • Compatible with new range of Mercedes €167.50 brackets 38480800 / 38480900 / 38481000 €227.00

13 SUSPENSION

08512800 Astra H Rear Axle Body Bush Kit NEW • To remove and install the rear axle body bush on the vehicle • Suitable for: - Astra H 2004 onwards - Meriva B 2010 onwards - Zafira B 2005 onwards

€239.95

MADE IN THE UK €279.00 08756000 BESTSELLER Ford Transit Bearing Press Kit Successful removal of troublesome inner bearing race and reinstallation of complete bearing assembly • For the removal and installation of the front wheel bearing on Ford Transits 2000-2013 with the aid of a workshop press • Suitable for bearings on both 5 & 6 stud hubs REMOVES BOTH THE INNER & OUTER BEARING RACE WITHOUT CUTTING OR HEATING

08253800 MADE IN THE UK €198.50 08260300 NEW Ford Transit Rear Disc Separator Kit Ford Transit Wheel • Press solution for removing the rear disc from the Hub & Brake Disc bearing hub Assembly Remover • The hub bearings on this type of Transit often seize in • For removal of the front brake place, requiring extreme force to separate disc and hub assembly on Ford • Suitable for Ford Transits Transits from 2001 - 2013 2000 onwards (where rear • OEM Code: 204-345B discs are fitted - 5 stud)

Bearing References: SNR: R152.58 OFFER €119.00 SKF: VKBA3589 SAVE €22.95 Optimal: 302 255 Febi: 45355 LIST PRICE €141.95

08256000 ON VEHICLE MADE IN THE UK 08269000 SOLUTION €140.50 Ford Transit Ball Ford Transit Lower Arm Bush Tool Joint Tool - Manual Option • For the removal and replacement of the large rear bush • For the removal & installation of the lower €244.95 on the lower arms of Ford Transits from 2000 – 2013 front ball joints as found on Ford Transits • Designed to be used with a 187000V2 press frame and ram 2000-2013 • On vehicle solution with minimal strip down • Designed to support ball joint • Can also be used in a workshop press for lower arms when during installation - helps eliminate they have been removed from the vehicle premature ball joint failure • Applications: • Manual option includes screw Ford Transit Mk5 & Mk6 from 2000 to 2013 converter allowing the user to utilise • OE Bush Numbers covered: an existing SP hydraulic ram 4042024, 4372132, 4540787 & 7372131 Hydraulic option also available (18256000) that includes 12 Tonne SP hydraulic ram

14 Tel: 01543 679900 SUSPENSION www.sykes-pickavant.com

18780500 CAN BE USED WITH AN IMPACT GUN OFFER €283.95 SAVE €71.00 Universal C-Clamp LIST PRICE €354.95 • For the dismantling / installation of suspension components on the vehicle • Jaw opening: 245mm • Throat depth: 100mm • Includes adaptors for use with the 08780000 and XS Sleeve kits • Designed to allow greater access in restricted situations and where the universal press frame is not suitable • Special ‘trapezoidal’ threaded screw, allows for the application of greater force • Base cup works with gold and silver rings from the SP press frame (18700100 / 187000V2) • Includes impact screw which can be removed and replaced with a hydraulic ram (1500 & 1800 Series)

08730500 18771000 OFFER €241.50 €248.50 NEW SAVE €42.45 Fiesta Mark VI Rear Land Rover Swivel LIST PRICE €283.95 Bush Kit Ball Joint Adaptor Set • For the installation and removal • New “on vehicle” solution for the removal and of the rear axle body mounting replacement of twin swivel ball joints as fitted onto bush found on Fiesta Mark VI the front axles of two popular Land Rover models: 2008 onwards Discovery 2 ‘98 – ‘04 and Range Rover P38A ‘94 – ‘02

MADE IN THE UK

187403V3 €282.50 UPDATED SET Mercedes Sprinter Ball Joint Adaptor Set • Updated set now includes new cup for common aftermarket arms • For the removal and installation of ball joints on Mercedes Sprinter ‘95 -’06 and revised ‘06 onwards models (901, 902, 903, 904 and 906) • Applications: - Sprinter ‘95 onwards - VW Crafter & Sprinter ‘06 onwards - VW LT ‘96 - ‘06

Opel Movano / Renault Master / 187502V3 187503V3 Nissan Interstar Ball Joint Adaptor Set - UPPER Ball Joint Adaptor Set - LOWER Ball Joint Adaptor Sets • Adaptor set from main kit (187512V3) • Adaptor set from main kit (187512V3) • For the removal and installation of upper and for use on upper ball OFFER €112.00 for use on lower OFFER €112.00 lower ball joints as fitted to the following: joints SAVE €28.50 ball joints SAVE €28.50 LIST PRICE €140.50 - Nissan Interstar ‘02 onwards LIST PRICE €140.50 - Opel Movano ‘98 onwards - Renault Master II ‘98 onwards

Adaptor Sets for Focus / Fiesta Trailing Arm Bushes • For the removal and installation of trailing arm bushes

• Adaptors can be used in a press frame with either a 18704100 pressure screw (recommended) or a hydraulic ram* MADE IN THE UK *Note - Adaptor Ring 18780400 required 18732100 18732200 Adaptor Set for Fiesta €141.95 Adaptor Set for Focus Trailing Arm Bushes Trailing Arm Bushes €141.95 Applications: Applications: Fiesta ‘95-’02, KA ‘96-’08 and Puma ‘96-’02 C-MAX ‘07- MPV, MKI ‘98-’04, MKII ‘04-, Kuga ‘08-, Mazda 3 (BK) ‘03-’09, Mazda 5 (CR/CW) ‘05- MPV, Volvo C30 ‘06-, Volvo C70 II ‘07-, Volvo S40 II ‘04-’12 For full application details, please visit our website: www.sykes-pickavant.com and Volvo V50 ‘04-’12

15 SUSPENSION

08135500 NEW ON VEHICLE 081220V2 BESTSELLER SOLUTION GEN3 Wheel Bearing Kit GEN2 All Sizes Master Kit • Designed to remove the hub and bearing from aluminium • 62 / 66 / 72 / 78 / 82 / 85mm sizes: €1199.95 multi-link suspension units with the aid of a pressure screw, - 62mm: Audi A2, VW Lupo (Front) adjustable legs and top plate to accommodate the different size - 66mm: Skoda Fabia, VW Fox (Front), Polo bearings as found on VW group vehicles - 72mm: Audi A1, Audi A2, Seat Cordoba, Ibiza, Skoda Fabia, • This procedure is currently carried out with repeated heavy blows Roomster, VW Polo (Front), VW Fox with PAS (Front) using a hammer to remove the heavily corroded bearing which can - 78mm: Ford Focus II, C-Max, Volvo C30, C70, S40, easily damage surrounding components such as steering knuckles V50 (Front), Mazda 3 and ball joints or fracture the - 82mm: Ford Mondeo, Galaxy, S-Max, Land Rover aluminium wishbone Freelander 2, Volvo S80, V70, XC60, XC70 Applications: - 85mm: VW Multivan, Touareg, Transporter (Front / Rear)

Audi: A4 00-, A5 07-, Individual Kits also available - Please contact Sykes-Pickavant for further information A6 97-, A7 10-, A8 94-, Q5 08-, R8 07- Seat: Exeo 08- VW: Passat 03-

Bearing Reference: FAG: 5745, 5726, 5739, 5478, 5744 €395.00 SKF: VKBA 6557, VKBA 3536, VKBA 6547, VKBA 6546, VKBA 6649 SNR-NTN: R157.45, R157.26, R157.40, R154.57, R157.43

08780000 BUY THE BEST! 08790000 Universal Press & Pull Sleeve Kit - XL Basic Kit - SUV / LCV Car / LCV Kit • For use as an add-on to the standard 08780000 kit (left) • Universal tool set for • Inside Dia. Range: extracting and drawing-in 82 - 88mm & of bushes, bearings, 98 - 104mm seals etc • Outside Dia. Range: • Contains 20 x Press 92 - 98mm & Sleeves in 2mm dia. 108 - 114mm steps • Inside Dia. Range: 34 - 72mm €495.00 €895.00 • Outside Dia. Range: 44 - 82mm

08785500 IDEAL FOR 08786500 €359.50 BALL JOINTS €461.50 XS Sleeve Kit - Basic XS Sleeve Kit - Master • For use as an add-on to the 08780000 kit (above) to increase • Stand alone kit for smaller bush applications applications for smaller bushes • Contains 10 x Press and ball joints Sleeves in 2mm • Contains 10 x Press Sleeves diameter steps in 2mm dia. steps • Inside Dia. Range: • Inside Dia. Range: 14 - 32mm 14 - 32mm • Outside Dia. Range: • Outside Dia. Range: 24 - 42mm 24 - 42mm

18705500 FOR USE WITH THE ‘0878’ €70.95 Press Frame Extension Legs & Nose Piece RANGE OF SLEEVE KITS • New kit designed for use with the 0878 range of sleeve kits • Extends the 187 press frame - internal capacity from 200 to 300mm • Pair of 100mm legs fit onto original 187 press frame legs • Extra extension legs can be added to further increase length • Nose piece connects press frame ram with 4 x step plate discs from the 0878 range of sleeve kits

16 Tel: 01543 679900 INDUCTION www.sykes-pickavant.com SP INDUCTION HEATER RANGE - 3 VERSIONS NOW AVAILABLE! All Sykes-Pickavant Induction Heaters use high frequency magnetic fields to create induction heat. When ferrous metallic objects are placed inside these magnetic fields, they heat up in SECONDS - expanding the metal which allows for fast and easy release • Operates cooler for better efficiency, handling and product longevity • Integrated CE filter improves handling of product • Long operating cycle time • LED light illuminates work area • Includes 3 x coil attachments • 1 year warranty - Parts/Labour • Durable reinforced thermal plastic housing with slip resistant grenade style grip • Carry Case with storage for all attachments For further details please visit: www.sykes-pickavant.com

96020000 9602012V SP 230v Induction Heater + SP 12v Induction Heater + • Specifically designed for the UK/EU: • Specifically designed for the UK/EU: 230v / 6 amp / 1000 watt with full CE certification 12v / 70 amp / 840 watt with full CE certification N.B. Not included SUMMER SPECIAL • Completely portable - works with any 12v battery pack or 12v battery €844.95 12V BATTERY OPERATED

€695.00 ONLY ONE ON THE MARKET! THE REST JUST CAN’T TAKE THE HEAT!

96021100 IDEAL FOR SITE WORK SP 110v Induction Heater + • Specifically designed for the UK/EU: 110v / 6 amp / 1000 watt with full CE certification

• Provides safe and near instant heat for site work, N.B. Not included construction and factory maintenance users • Replaces the need for open flame options when heating components, making the completion of on-site risk assessments far easier €844.95

Choose from the following accessories that are compatible with our full range of Induction Heaters 96015000 €141.95 960260SP 96025000 €99.50 SP Coil Kit SP Rope Coil Set - x3 SP Heat Pad • 8 x popular sizes of interchangeable • Contains 3 x highly • For the removal of decals, graphics, stripes, coils adaptable coils allowing emblems & body mouldings etc user to shape to suit • Softens the adhesive to make removal simple & €119.50 effective

17 AIR CONDITIONING

New Range of Air Conditioning Machines Allows for the quick and efficient service of air con systems - cleaning the AC system, All Sykes-Pickavant Induction Heaters use high frequency magnetic fields to create induction heat. replacing refrigerant and ensuring a cool vehicle on any journey NEW When ferrous metallic objects are placed inside these magnetic fields, they heat up in SECONDS - Each machine includes the following: expanding the metal which allows for fast and easy release AIR PURGE SYSTEM - New function that helps the user to manage the discharge of non-condensable gases, replacing the traditional method of a manual check using the vessel pressure gauge

100% RECHARGE - Super Charge exploits the machine’s operation to obtain the same condition that would otherwise be created by means of vessel heating systems

OIL CLEAN - No more waste. This function can force recovered oil discharge in the final phase, saving gas.

VACUUM BEYOND REPAIR - Equipped with a high performance vacuum pump, reaching the best vacuum level more rapidly

LONG LIFE PUMP - Allows an extension of up to 1000 hours of the average life of the pump oil used in the machine

ECO LOCK COUPLERS® - Equipped with ECO LOCK® quick couplers, preventing gas wastage during removal - safeguarding operator safety and protecting the environment. 6000 Range • Easy to operate • 65kg - Easy to manoeuvre • 12L recharge vessel • Includes printer • 1 Year Warranty included • Additional 2 earY Warranty also available - Ask for details Part No. Description Price 35023500 6000 PLUS Air Conditioning Machine - R-134a €2832.95 35024900 6000 ECO 1234 Air Conditioning Machine - R-1234yf €3159.50

ALL MACHINES INCLUDE AN INTEGRATED PRINTER 8500 Range • Easy to operate • 86kg • 20L recharge vessel • Includes printer • 1 Year Warranty included • Additional 2 earY Warranty also available - Ask for details

Part No. Description Price 35020300 8500 PLUS Air Conditioning Machine - R-134a €3826.95 35020600 8500 1234 PLUS Air Conditioning Machine - R-1234yf €4252.95

Range of Optional Accessories available:(See website for full details)

35013000 35012900 Nitrogen Leak Test Kit Hybrid Pro Kit €198.95 €96.50

35005300 35019800 Flushing Kit for R134a Flushing Kit for R1234yf €284.00 €397.50

Note: Warranty Updates include: 2 x pcs dryer filter, 2 x pcs vacuum pump oil (500ml) and 2 x database updates 18 Tel: 01543 679900 WORKSHOP EQUIPMENT www.sykes-pickavant.com Silver Series range of Hydraulic Workshop Presses equipped with a two-speed manual pump, overload safety valve, automatic arm back-run system & V blocks

• Heavy duty steel frame Height Width Depth Bed Depth Range Weight • Two speed pump Part No. Rating (mm) (mm) (mm) (mm) (mm) (kg) Price • Overload safety valve • Automatic arm return 53436000* 15T 1930 920 650 170 85 - 950 150 €882.00 • Pressure gauge • V blocks 53436200* 20T 2030 940 650 180 65 - 1030 165 €1052.00 • Manufactured in the EU • Piston over-travel 53436300* 25T 2030 950 650 180 70 - 1030 170 €1295.00 limit stop • Winch for table 53436400* 30T 2060 1120 650 200 115 - 1020 230 €1495.00 (For models 53436400 & 53436500)

53436500 50T 2290 1220 650 210 70 - 1065 370 €2199.50

Optional accessories including press *Recommended for use with Universal Press Support Block - 08770000 - See below plates and press piece sets are also N.B. For deliveries made outside UK Mainland, an additional carriage charge will apply available. For details, please visit: www.sykes-pickavant.com Other sizes of press are available - Contact Customer Services for details

08770000 SUITABLE FOR USE WITH PRESSES UP TO 30T Universal Press Support Block • Easily press bearings on a variety of suspension arms €285.00 • Three point contact guarantees a perfect, safe support • Adjustable height anvil bolts • Swivel element for added versatility • Suitable for use with presses up to 30T

Mechanical Headlight Beam Testers - MOT Approved & Pre-Inspection • Features rotating column with adjustable mirror visor for accurate alignment to vehicle NEW • Luxmeter with graduated analogue scale for accurate light intensity measurement • Easily adjustable vertical sliding mechanism by self lubricating sliders • Features built in MOT beam checking panel SUITABLE FOR ALL HEADLIGHT TYPES INCLUDING XENON

02695000 02683000 Pre-Inspection MOT Approved Headlight Beam Tester - LV Headlight Beam Tester • 3.7 metre rail kit / column height: 1.66m • Portable base on 3 wheels • Base mounted on double rail for (self install only) ease of use (self install only) €895.00 • Column height: 1.66m 02688000 €825.00 MOT Approved Headlight Beam Tester - HGV • 5.2 metre rail kit / column height: 1.66m • Base mounted on double rail for ease of use (self install only) €945.00

Distributor Stamp: Sykes-Pickavant Ltd, Unit 4 Cannel Road, Burntwood Business Park, Burntwood, Staffordshire, WS7 3FU. United Kingdom Tel: +44 (0) 1543 679900 Fax: +44 (0) 1543 679901 e-mail: [email protected] www.sykes-pickavant.com