DOCSLIB.ORG

Lab Planning Guide R1a 1Condensed-FULL.Pdf

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text

Load more

HEMCO has been a leading manufacturer of basic laboratory equipment serving the research and development and life science and technology industries since 1958. HEMCO works with architects, engineers, laboratory planners, contractors, and customers to complete laboratory projects on time and on budget. Located in Independence, Missouri, the heart of America and the crossroads of North America. HEMCO is situated in a major center for transportation, communication, distribution, and manufacturing industries worldwide. HEMCO offers a complete line of furniture, countertops, and fume hoods to equip your laboratory. Our professional staff will work with you to design a layout that is functional, ergonomic, flexible, and, more importantly, meets your process and safety requirements. We specialize in laboratory projects that are personally engineered to meet your time and budget schedules. Our services can include a complete turnkey installation to ensure the one source quality you expect and deserve. HEMCO would welcome the opprotunity to work with you from your concept planning to a completed, operational laboratory. HEMCO’s modern manufacturing and distribution facilities combined with our many years of experience uniquely qualifies us to provide laboratory hoods, laboratory furniture, laboratory enclosures, clean labs, and clean rooms. Our extensive engineering, design, and manufacturing expertise can transform your laboratory concepts into reality. To Order Or Request At Your Service Quote TERMS Payment to HEMCO Corporation for CALL (816) 796-2900 purchase and shipping charges can be made by Monday-Friday 8 AM - 5 PM Master Card, Visa, American Express, company Central Standard Time check, certified check, money order, letter of credit, or wire transfer. For companies with CLICK [email protected] established credit with HEMCO our terms are 24-7 Net 30 days. All purchases are subject to our standard terms and conditions. Payment in US FAX (816) 796-3333 dollars. Anytime Shipping Freight is FOB-Factory collect or prepaid and add via MAIL motor carrier. FOB-Factory. For international shipments-Exworks HEMCO Corporation HEMCO. 711 S Powell Road Independence, MO 64056 Delivery HEMCO will process your order promptly to meet your USA desired schedule. Consult factory for shipping information. Table of Contents Introduction............................................................2 Section I: Furniture Groupings..........................................................4........ ..............Laboratory Cabinets..........................................6 Countertops & Sinks..........................................8 ....................Plumbing, Electrical, & Safety............................9 Section II: Fume Hoods & Accessories UniFlow LE Air Bypass Fume Hood................10 UniFlow CE Compact Fume Hood..................12.................. ...................UniFlow SE High Performance Fume Hood....14 UniFlow FM Floor Mounted Fume Hood.........16 Plan-A-Hood...................................................18 Fume Hood Worksurfaces & Cabinets............19............................... Fume Hood Service Fixtures...........................20 Fume Hood Electrical......................................21 Fume Hood Sinks & Plumbing........................22 Safety Showers...............................................23.................. Section III: Ventilation Ventilation Systems & Recommendations.......24 Canopy Hoods................................................26 ......................Ductless Hoods...............................................27 Exhaust & Ducting...........................................28 Blowers & Filtration.........................................30 Section IV: Modular Laboratories Modular Labs and Rooms..............................32 Plan-A-Lab......................................................33 Modular Clean Rooms....................................34................ .................Clean Enclosures............................................35 UniLine Casework Groupings Unitized design incorporates our most popular casework groupings to meet your laboratory needs. Welded steel with chemical resistant, epoxy powder coat finish, and 1” thick phenolic resin countertops with 4” high backsplashes are standard. ADA and sitting height options are available. Atlantis Grouping UniLine Atlantis Grouping provides basic lab storage and a versatile work area. Cabinet grouping includes 3 standing height cabinets with rear filler panels on both ends, phenolic resin worksurface with 4” high backsplash, 16” x 12” x 8” deep epoxy resin sink with outlet, and hot/cold mix gooseneck faucet with vacuum breaker. For additional accessories, see pages 7-9. Atlantis Cabinet Grouping Length 1 2 3 Cat. No. 1 2 3 9’ 36” 36” 36” 70001 29” 10’ 48” 36” 36” 70002 Length 12’ 48” 48” 48” 70003 Enterprise Grouping UniLine Enterprise Grouping provides a convenient balance of storage and work space. Cabinet grouping includes 3 standing height cabinets with rear filler panels, 2 wall cabinets, phenolic resin worksurface with 4” high backsplash, 16” x 12” x 8” deep epoxy resin sink with outlet, hot/cold mix gooseneck faucet with vacuum breaker, and 24” x 30” high phenolic resin pegboard with stainless steel drain trough. For additional accessories, see pages 7-9. Enterprise Cabinet Grouping Length 1 2 3 Cat. No. 9’ 36” 36” 36” 70201 10’ 36” 48” 36” 70202 12’ 48” 48” 48” 70203 1 2 3 29” Discovery Grouping Length UniLine Discovery Grouping features a stand-up workstation and sit- down desk area. Cabinet grouping includes 3 standing height cabinets, 1 sitting height cabinet, 1 single desk drawer apron with rear filler panels, 2 wall cabinets, phenolic resin worksurface with 4” high backsplash, 16” x 12” x 8” deep epoxy resin sink with outlet, hot/cold mix gooseneck faucet with vacuum breaker, and 24” x 30” high phenolic resin pegboard with stainless steel drain trough. For additional accessories, see pages 7-9. Discovery Cabinet Grouping Length 12345Cat. No. 13’6” 36” 36” 36” 36” 18” 70101 14’6” 48” 36” 36” 36” 18” 70102 1 2 3 4 5 16’6” 48” 48” 48” 36” 18” 70103 29” Length Endeavour Grouping UniLine Endeavour Grouping is a flexible design that can serve as an island or peninsula layout. Cabinet grouping includes either 3 or 7 standing height cabinets with front and end filler panels, phenolic resin worksurface, 24” x 16” x 8” deep epoxy resin sink with outlet, hot/cold mix gooseneck faucet with vacuum breaker, 24” x 30” high phenolic resin pegboard with stainless steel drain trough mounted on an 84” high utility chase, and center island reagent shelf with pedestals and phenolic resin shelf. Endeavor Cabinet Grouping Length 1 2 3 Cat. No. 58” 5’5” 36” — — 70301 1 2 3 29” 10’5” 36” 24” 36” 70302 Length 14’6” 48” 48” 48” 70303 4 UniLine Casework Groupings Viking Grouping UniLine Viking Grouping is ideal for medical or examination rooms and small lab requirements. Cabinet grouping includes 1 or 2 standing height cabinets, 1 or 2 wall cabinets, plastic laminate worksurface, 12” x 12” stainless steel sink with outlet, and hot/cold mix gooseneck faucet. For additional accessories, see pages 7-9. Viking Cabinet Grouping Length 1 2 Cat. No. 4’ — 48” 70401 5’ 30” 30” 70402 6’ 36” 36” 70403 8’ 48” 48” 70404 1 2 24” Length Gemini Grouping UniLine Gemini Grouping features a sitting height desk area that can be incorporated with any of the HEMCO groupings. Cabinet grouping includes 1 sitting height file drawer cabinet with rear filler panels, single drawer apron, and phenolic resin worksurface. For additional accessories, see pages 7-9. Gemini Cabinet Grouping Length 1 2 Cat. No. 4’ 30” 18” 70501 4’6” 36” 18” 70502 1 2 29” 5’6” 48” 18” 70503 Length Freedom (ADA) Grouping Option When ADA requirements are necessary, the UniLine Freedom Grouping option allows you specify any HEMCO Casework Grouping and be compliant to all dimension, space, and access standards as specified by ADA. In addition, all electrical services, plumbing accessories and safety equipment including emergency showers and eye wash stations are designed to meet ADA guidelines. Simply add “ADA” as a suffix to any HEMCO part number and HEMCO can design, quote, and supply ADA compliant equipment. Proper planning eliminates/reduces future problems. For a complete guide for all ADA technical information, including dimensions and standards, please visit: www.access-board.gov/adaag. Reach In Reach Over Corner Solutions HEMCO corner cabinets and fillers offer several means by which HEMCO casework groupings or individual cabinets can be connected at a corner. Overlap Corner Cabinet Basic Corner Scribe 36” Cat. No. 71981 Spacious Corner Cabinet 2” Cat. No. 74002 48” Cat. No. 71983 Cat. No. 71901 5 UniLine Base Cabinets Lab cabinets are offered in standard modular sizes that allow you to create a custom laboratory to meet your specific needs. All cabinets feature furniture grade welded steel construction with a durable, chemical resistant, epoxy powder coat finish that meet or exceed SEFA 8, SEFA’s recommended practice for laboratory casework. Standard color is Silver Beige. Base Cabinets (standard height 35 inches, depth 22 inches) Cabinet End View Width Cat. No. Width Cat. No. Width Cat. No. Width Cat. No. 18” 70701 18” 71221 18” 71181 18” 71951 24” 70702 24” 71222 24” 71182 24” 71952 Height–Standard 35” Specify left or right hinged Specify left or right hinged Specify left or right hinged Height–ADA 32” Height–Sitting 28” Width Cat. No. Width Cat. No. Width Cat. No. Width Cat. No. Width Cat. No. 30”
Recommended publications
  • Instructions for Use

    Instructions for Use

    EN 06/2019 EN FD SOLID FIRE Instructions for use www.attack.sk CONTENTS CONTENTS ...................................................................................................................................................................... 2 INTRODUCTION ............................................................................................................................................................. 3 IMPORTANT WARNINGS ............................................................................................................................................. 3 1 USE AND PREFERENCES OF THE BOILER ..................................................................................................... 4 2 TECHNICAL PARAMETERS OF ATTACK FD SOLID FIRE ........................................................................... 5 3 DIMENSIONS OF BOILERS ATTACK FD SOLID FIRE ................................................................................... 6 4 HEAD LOSSES ....................................................................................................................................................... 6 5 DESCRIPTION ........................................................................................................................................................ 7 5.1 HOW TO CHOOSE THE RIGHT SIZE OF A BOILER .............................................................................. 7 6 LOCATION AND INSTALLATION OF THE BOILER ATTACK FD SOLID FIRE ........................................ 8 6.1 BOILER
  • Sime FB Series (Solida) Manual

    Sime FB Series (Solida) Manual

    INDEX 1 DESCRIPTION OF THE APPLIANCE 1.1 INTRUDUCTION . 16 1.2 SUPPLY 1.3 DIMENSIONS 1.4 TECHNICAL FEATURES SOLIDA - ENGLISH SOLIDA 1.5 HEAD LOSSES 2 INSTALLATION 2.1 BOILER ROOM . 17 2.2 CONNECTION TO THE FLUE 2.3 CONNECTION OF THE PLANT 2.4 BRAZIER GRID ASSEMBLY (optional) 2.5 ASSEMBLY OF THE ACCESSORIES . 18 2.6 CASING ASSEMBLY 2.7 DRAUGHT REGULATOR 2.8 HYDRAULIC CONNECTION DIAGRAMS . 19 3 USE AND MAINTENANCE 3.1 PRELIMINARY IGNITION CHECKS . 20 3.2 CLEANING 3.3 MAINTENANCE 1 DESCRIPTION OF THE APPLIANCE IT 1.1 INTRODUCTION 1.2 SUPPLY for the ports, a screw with bakelite knob for the manual adjustment of the blast PT The cast iron “SOLIDA” boilers are a valid The boilers are supplied in three separate gate damper, a contact spring for the solution for the present energetic pro- parcels: bulb of the thermometer and the M6 blems, since they can run with solid fuels: – Boiler body assembled and equipped lever to be fixed at the blast gate dam- GB wood and carbon. with loading port, ash boxes port, smoke per. “Test certificate” to be kept with the chamber with blast gate damper, ash documents of the boiler. “SOLIDA” boilers conform to Directive PED collection basin and thermostatic drau- – Cardboard box for casing with thermo- SL 97/23/CEE. ght regulator. Bag containing: 2 handles meter and documents bag. 1.3 DIMENSIONS DK RO M C.H. flow RUS 2” (UNI-ISO 7/1) R C.H. return 2” (UNI-ISO 7/1) S Boiler drain FR 1/2” (UNI-ISO 7/1) BE Fig.
  • Laserlock Catalog Modular Ducting Systems

    Laserlock Catalog Modular Ducting Systems

    LASERLOCK CATALOG MODULAR DUCTING SYSTEMS Laser welded clamp together ducting for all applications, from light to heavy gage duct or moderate to severe process criteria. Quality and Service Duct Size and Options Duct Incorporated is an employee-owned business based on the Using CNC technology and specific tooling designed to cost- philosophy that quality products and excellent customer service effectively produce our product, Duct Incorporated is able to supply are the highest priority goals for a manufacturing and distribution ducting from 3" to 80"+ in galvanized, galvaneal (for paint and company. These goals are best achieved in pleasant, friendly powder coating), SS (304 and 316) and aluminum. Heavy gage surroundings by employees who are valued and respected pipe can be either rolled and welded or produced as spiral. individuals. Our welders are certified for military applications and will meet all of Our dedicated staff of professionals — engineering, customer your requirements. service personnel and a well-trained, committed work force — offer unmatched experience and depth of capabilities. With over Fully welded, buffed or electro-polished product can be made to 300 man-years of experience in the manufacture and supply of your specifications with high strength clamping systems. Our ducting uncompromised duct quality, Duct Incorporated is the single from 14 gage to 22 gage has a rolled end directly on the product. source for all of your ducting needs. There are no “added collars” as typically seen with lesser manufac- turing capabilities. Worldwide Ducting Supply Industries that use our ducting are: Duct Incorporated welcomes export opportunities to countries Air Movement worldwide.
  • Tm 9-4120-402-14 Technical Manual Operator's, Unit, Direct Support, and General Support Maintenance Manual

    Tm 9-4120-402-14 Technical Manual Operator's, Unit, Direct Support, and General Support Maintenance Manual

    TM 9-4120-402-14 TECHNICAL MANUAL OPERATOR'S, UNIT, DIRECT SUPPORT, OPERATING INSTRUCTIONS 2-1 AND GENERAL SUPPORT MAINTENANCE MANUAL OPERATOR PREVENTIVE MAINTENANCE CHECKS AND SERVICES (PMCS) 2-5 OPERATOR TROUBLESHOOTING 3-1 UNIT MAINTENANCE INSTRUCTIONS 4-1 UNIT PREVENTIVE MAINTENANCE CHECKS AND SERVICES (PMCS) 4-23 UNIT TROUBLESHOOTING 4-37 DIRECT SUPPORT MAINTENANCE INSTRUCTIONS 5-1 GENERAL SUPPORT AIR CONDITIONER, MAINTENANCE INSTRUCTIONS 6-1 VERTICAL, COMPACT 18,000 BTU/HR MAINTENANCE ALLOCATION CHART B-1 MODEL F18T-MPI 208 VOLT, THREE PHASE, 50/60 OR 400 HERTZ (4120-01-325-7062) DISTRIBUTION STATEMENT A: Approved for public release; distribution is unlimited. HEADQUARTERS, DEPARTMENT OF THE ARMY 1 FEBRUARY 1993 TM 9-4120-402-14 WARNING Disconnect input power before disassembly of the air conditioner to prevent dangerous, possibly fatal, electrical shock. WARNING Refrigerant under pressure is used in the operation of this equipment. Death or severe injury may result if personnel fail to observe safety precautions. Never use a heating torch on any part that contains refrigerant 22. Explosive pressures can be built up. Never pressurize refrigerant lines with oxygen. Mixing oxygen with oil will cause an explosion. Use great care to avoid contact with liquid refrigerant or refrigerant gas being discharged from any container under pressure. Sudden and irreversible tissue damage can result from freezing. Wear thermal protective gloves and a face protector or safety glasses in any situation where skin or eye contact is possible. Avoid inhaling refrigerant gas. Prevent contact of refrigerant gas with flame or hot metal surfaces. Heat causes the refrigerant to break down and form carbonyl chloride (phosgene), a highly toxic and corrosive gas.
  • Proceedings of the 11Th AEC Nuclear Air Cleaning Conference, Volume 2

    Proceedings of the 11Th AEC Nuclear Air Cleaning Conference, Volume 2

    OPEN DISCUSSION SESSION FIRST: I would like to take a moment if I may and extend my own thanks, as well as those of the entire group, to the local Committee that has been so instrumental in making this meeting go as smoothly as it has. There have been a number of people involved and I am sure you all appreciate the work they have done. Let me remind you who they are. In addition to Mr. Marshall Mills there is Mr. G. R. Yesberger who has been in charge of the registration and the finances for the Conference. Mr. H. G. Hicks has been in charge of the tours. Mr. F. J. Williams has been in charge of the auditorium arrangements. Mr. R. L. Kathren was in charge of the Health Physics Society dinner last Tuesday. Mr. W. L. Koop has been in charge of the publicity for the meeting and I hope you have seen some of the notices in the papers. Mr. R. H. Wilson has been in charge of transportation. Mary Sharp has performed above and beyond the call of duty in transcribing the record. To this lady and to all of these gentlemen I extend your thanks as well as my own and a commendation for a job very well done. The rules for the Open Discussion Session are very simple. These presentations are comments, questions, and discussions which have been left over from the preceding sessions or entirely new topics. The only rules are that the speakers be brief. Five or ten minutes will be allotted for a presentation and we will then follow the discussion wherever it goes.
  • Tm-9-4120-371-14

    Tm-9-4120-371-14

    TM 9-4120-371–14 TECHNICAL MANUAL INTRODUCTION 1 OPERATOR’S, UNIT, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE OPERATING INSTRUCTIONS 2 MANUAL OPERATOR’S MAINTENANCE INSTRUCTIONS 3 MAINTENANCE INSTRUCTIONS: 4 DIRECT SUPPORT 5 MAINTENANCE INSTRUCTIONS GENERAL SUPPORT MAINTENANCE INSTRUCTIONS 6 REFERENCES A MAINTENANCE ALLOCATION CHART B COMPONENTS OF END ITEM AND BASIC ISSUE ITEMS LISTS C AIR CONDITIONER, VERTICAL, COMPACT, 18,000 BTU/HR ADDITIONAL 208 VOLT, 3 PHASE, 50/60 HERTZ AUTHORIZATION LIST D KECO MODEL F18T-2S (4120-01-114-2471) EXPENDABLE SUPPLIES KECO MODEL F18T-2SA AND MATERIALS LIST E (4120-01-329-1515) A.R.E. MODEL CVP-20-5/6-08 INDEX I (4120-01-216-1151) Approved for public release; distribution is unlimited. l This manual supersedes TM 5-4120-371 -14, 4 June 1982. HEADQUARTERS, DEPARTMENT OF THE ARMY 30 SEPTEMBER 1991 TM 9-4120-371-14 C1 CHANGE HEADQUARTERS DEPARTMENT OF THE ARMY NO. 1 WASHINGTON, D. C., 1 JULY 1992 Operator’s, Unit, Direct Support and General Support Maintenance Manual AIR CONDITIONER, VERTICAL, COMPACT, 18,000BTU/HR 208 VOLT, 3 PHASE, 50/60 HERTZ KECO MODEL F18T-2S, NSN 4120-01-114-2471 KECO MODEL F18T-2SA, NSN 4120-01-329-1515 A.R.E. MODEL CVP-20-5/6-08, NSN 4120-01-216-1151 Approved for public release; Distribution is unlimited TM 5-4120-371–14, 30 September 1991 is changed as follows: 1. Remove and insert pages as indicated below. New or changed text material is indicated by a vertical bar in the margin. An illustration change is indicated by a miniature pointing hand.
  • Fire Dampers

    Fire Dampers

    Dampers Greenheck offers the most UL Certified dampers and the largest selection of AMCA Licensed dampers in the industry. Our state- of-the-art testing facility allows us to regularly test our products to ensure quality performance is maintained. With in-house testing capabilities, we are able to accelerate new product development concepts that meet the challenging demands of the ever changing market place. For highly corrosive applications, Greenheck also offers severe environment dampers manufactured with 316 stainless steel (SE). Dampers are also manufactured with 304 stainless steel (SS). Air Measuring Products Air measuring products help buildings meet the minimum outdoor air requirements of ASHRAE Standard 62 or California Title 24 by providing accurate monitoring and control of outside air. Airflow Measuring Station Model AMS The AMS is an accurate airflow measuring station and is furnished with a properly sized pressure transducer that outputs a signal proportional to cfm. The AMS is compatible with a field-supplied controller or a factory-supplied LON controller to indicate airflow volume. Airflow Measuring Station with Damper - Pressure Differential Model AMD The AMD series combines the function of an accurate airflow measuring station and a low-leakage control damper into one compact assembly that both measures and regulates airflow volumes to a target set point. The AMD series is compatible with a field-supplied controller or a factory-supplied analog controller. The four available models are: AMD-23 featuring a 3-V blade control damper AMD-33 featuring a fabricated airfoil blade control damper AMD-42 featuring an extruded airfoil blade control damper AMD-42V featuring a vertical extruded airfoil blade control damper Airflow Measuring Station with Damper - Thermal Model AMD-xx-TD The AMD series combines the function of an highly accurate thermal dispersion airflow measuring station and a low-leakage control damper into one compact assembly that both measures and regulates airflow volumes to a target set point.
  • HVAC for Heavy Industry

    HVAC for Heavy Industry

    HVAC for Heavy Industry Enabling Wellbeing Superior HVAC solutions for Heavy Industry applications Enabling Wellbeing for people Halton is passionate about in- A strong partnership door environments. With over 50 years of experience, the com- Halton Group recently became the pany offers business-enhancing majority shareholder in Flamgard Calidair in an acquisition which will solutions for safe, comfortable, see the two companies share ex- and energy-efficient environ- perience and expertise in order to ments for companies that value address key global challenges more the wellbeing and productivity effectively. of their customers and person- nel. By reassessing global trends and the development of key markets, Halton and Flamgard Calidair have refocused HVAC can play a vital role in their strategies in order to maximise improving safety by providing positive impact in sustainability and good thermal conditions and wellbeing, with a particular focus on protecting against hazards in helping customers and stakeholders the production process. In this to achieve net-zero objectives. brochure, we present an over- This new focus is illustrated clearly on view of Halton’s superior HVAC the Heavy Industry 3D World, which products and solutions for showcases not only what Halton Ma- Heavy Industry applications. rine and Flamgard Calidair can offer in a wide range of applications, but how customers can leverage the en- tirety of the Halton Group’s expertise. 2 Superior HVAC solutions for Heavy Industry applications Halton’s expertise Quality Our way of doing business Designing and selecting equipment • Halton production emphasizes tai- should always be done according to loring, which means that solutions the operating environment.
  • Ieorttinn Irralb Ot Urmdooom

    Ieorttinn Irralb Ot Urmdooom

    r early Ttii^UGH HERALD*S SPECIAL CHRISTMAS SE THE WBATHBB DAlLy CnUJULA'nO^ ForoeMt of O. B. Weothor ter the m afia •* November, 1884 Bortfofd 5,438 Fair toolght ood Thureday, with of the A o«t rttlug temperature. iEorttinn Irralb ot UrmdoOoM (OtoaoUtod Advarttolug eu Page Ih.) M ANCH ESTER, CONN., W E D N E S D A Y , DECEMBER 12,1934 (24 PAGES IN TWO SECTIONS) PRICE rHRBB CENTS /VOL. LIV., NO. 92. Snow And Cold Hamper Rescue W ork JUDGE SCORES END OF DEPRESSION $4,000 IN DIAMONDS UNITED STATES STOLEN IN NORWICH BY NEXT JULY SEEN PENltfSYSTEIfl Bandits Also Get $500 in 1BREECCC60YS BY CHARLES DAWES Calls It Purposeless, Hap- Cash and $472 Check ~ hazard, Cruel and Dis- BURNED TO DEATH Former Vice Presideit LEGISLATIVE DRIVE i Minister Forced to Lie On graceful”— Tells of Ex- Makes Prediction After Floor. Flames Destroy Camp and OF UNIONS OPENS periences in Texas. Completing a Sorrey Make 200 Others Withont Norwich, Dec. 12.— (AP) — Two Wa.shlngton. Dec. 12.— tA P ) — Made of Former De- unmasked bandits forced three men Head of A. F. of L. Proposes ^eher--Foar Injured. The American penal system was including a. minister to lie on the called “ purposeless, haphazard, cruel pressions. floor, face downward for IS minutes, Tax on Payrolls to Finance and disgraceful” today by Judge today during a Jewelry store holdup Norrle, Tenn., Dec. 12 —-(API — Joseph C. Hutcheson of the Fifth and then fled m an automobile with Fire which broke out in 10 degree Circuit Court of Anpeals.
  • All Products Catalog

    All Products Catalog

    building value in air WORLDWIDE At Greenheck, being the easiest company to do Through our commitment to sustainable business with is not just a catch phrase. It is a core manufacturing practices that reduce energy value that we carry out every day in delivering the consumption and production costs, we ensure widest range of reliable air movement, control, and competitive prices. We support and invest in conditioning products to our customers worldwide. our highly skilled employees so they can design As an industry-leading manufacturer, not only do and produce the quality products you expect we build value in air through our products, we also from Greenheck. And we tackle the industry’s do so by exceeding your expectations for on-time most complex and everchanging challenges by delivery, easy installation, energy-efficient operation, continually manufacturing innovative new products and dependable performance. that meet your needs today—and tomorrow. Our Mission: To be the market leader in the development, manufacture and worldwide sale of quality air-moving, control and conditioning Our Vision: To be one of the most revered equipment with total commitment to the customer. companies in the worldwide HVAC and food service market space, respected for outstanding Our Purpose: To operate profitable product quality, market-leading innovation, superb businesses focused on delivering the most customer service and insight, and a results- effective and efficient products, services and orientated, entrepreneurial culture. systems to ensure air quality and comfort in the world’s buildings. 2 BUILDING VALUE IN AIR Building value in air — from the beginning. Today, Greenheck is the world’s largest manufacturer of commercial, institutional, and industrial air movement, control, and conditioning equipment.
  • HVAC INSTANT ANSWERS This Page Intentionally Left Blank

    HVAC INSTANT ANSWERS This Page Intentionally Left Blank

    HVAC INSTANT ANSWERS This page intentionally left blank. HVAC INSTANT ANSWERS Peter Curtiss Newton Breth McGRAW-HILL New York Chicago San Francisco Lisbon London Madrid Mexico City Milan New Delhi San Juan Seoul Singapore Sydney Toronto McGraw-Hill abc Copyright © 2002 by The McGraw-Hill Companies, Inc. All rights reserved. Manufactured in the United States of America. Except as permitted under the United States Copyright Act of 1976, no part of this publication may be reproduced or distributed in any form or by any means, or stored in a database or retrieval system, without the prior written permission of the publisher. 0-07-140949-1 The material in this eBook also appears in the print version of this title: 0-07-138701-3. All trademarks are trademarks of their respective owners. Rather than put a trademark symbol after every occurrence of a trademarked name, we use names in an editorial fashion only, and to the benefit of the trademark owner, with no intention of infringement of the trademark. Where such designations appear in this book, they have been printed with initial caps. McGraw-Hill eBooks are available at special quantity discounts to use as premiums and sales promo- tions, or for use in corporate training programs. For more information, please contact George Hoare, Special Sales, at [email protected] or (212) 904-4069. TERMS OF USE This is a copyrighted work and The McGraw-Hill Companies, Inc. (“McGraw-Hill”) and its licensors reserve all rights in and to the work. Use of this work is subject to these terms.
  • Solida 8 Pl - English 1 Operation Wood and Carbon

    Solida 8 Pl - English 1 Operation Wood and Carbon

    INDEX 1 OPERATION WITH WOOD AND CARBON 1.1 DESCRIPTION . 48 1.2 INSTALLATION . 49 1.3 USE AND MAINTENANCE . 52 2 OPERATION WITH PELLETS AND SPECIAL KIT 2.1 DESCRIPTION . 53 2.2 INSTALLATION . 54 8 PL - ENGLISH SOLIDA 2.3 USE AND MAINTENANCE . 60 1 OPERATION WOOD AND CARBON 1.1 DESCRIPTION 1.1.2 SUPPLY adjustment of the blast gate damper, a IT contact spring for the bulb of the thermo- 1.1.1 INTRUDUCTION The boilers are supplied in three separate par- meter and the M6 lever to be fixed at the ES cels: blast gate damper. “Test certificate” to be The cast iron “SOLIDA 8 PL” boilers are a – Boiler body assembled and equipped with kept with the documents of the boiler. GB valid solution for the present energetic pro- loading port, ash boxes port, smoke cham- Miscellaneous accessories required to use blems, since they can run with solid fuels: ber with blast gate damper, ash collection the boiler with pellets (see Section 2 in the RUS wood and carbon. basin and thermostatic draught regulator. manual). “SOLIDA 8 PL” boilers conform to Directive Bag containing: 2 handles for the ports, a – Cardboard box for casing with thermo- PED 97/23/CEE. screw with bakelite knob for the manual meter and documents bag. FR BE 1.1.3 DIMENSIONS FIXTURES M C.H. flow 2” (UNI-ISO 7/1) R C.H. return 2” (UNI-ISO 7/1) S Boiler drain 1/2” (UNI-ISO 7/1) Fig. 1 1.1.4 TECHNICAL FEATURES Model SOLIDA 8 PL Carbon heat rate* kW (kcal/h) 39,5 (34.000) Performance class 2 Duration of a coal load h * 4 Duration of a wood load h * 2 Load volume dm3 59,5 Minimum chimney depression mbar 0,18 P (depth) mm 855 L (combustion chamber depth) mm 690 Number of elements n° 8 Max.