DOCSLIB.ORG

PVF Product Guide

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
PVF Product Guide Product Guide Pipes, Valves, Fittings plus Threaded Rod, Strut, Hangers & Accessories 1-800-849-3900 www.dillonsupply.com Index Pipe Fittings, Threaded � � � � � � � � � � � � � � � � � 2 Weld Fittings � � � � � � � � � � � � � � � � � � � � � � � � � � � 17 Traps and Strainers � � � � � � � � � � � � � � � � � � � � � 26 Bushings, Double Tap Tank � � � � � � � � � � � � � � � � � 2 Carbon Steel, Global � � � � � � � � � � � � � � � � � � � � � 17 Steam Trap, Thermo-dynamic, Bushings, Hex � � � � � � � � � � � � � � � � � � � � � � � � � � � � 2 Forged Steel Socket Weld 3000#, Import � � � 18 Spirax-Sarco � � � � � � � � � � � � � � � � � � � � � � � � � � 26 Caps � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 3 Steam Trap, Universal Thermo-dynamic, 19 Couplings � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 5 Flanges and Flange Gaskets � � � � � � � � � � � Spirax-Sarco � � � � � � � � � � � � � � � � � � � � � � � � � � 26 Couplings, Reducing � � � � � � � � � � � � � � � � � � � � � � 6 Flange, Carbon Steel, Import � � � � � � � � � � � � � � 19 Strainers, Cast Iron, Spirax-Sarco � � � � � � � � � 26 Crosses � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 7 Flange, Floor � � � � � � � � � � � � � � � � � � � � � � � � � � � � 19 Universal Steam Trap Connectors, 26 Elbows, 45 � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 8 Flange Gasket, Bolt and Nut Kit � � � � � � � � � � � � 20 Spirax-Sarco � � � � � � � � � � � � � � � � � � � � � � � � � � Elbows, 90 � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 7 Flange Gasket, Spiral Wound 304SS � � � � � � � 20 Y-Strainer, Cast Iron, 100 Mesh Screen 26 Elbows, Reducing � � � � � � � � � � � � � � � � � � � � � � � � � 8 Sealants, Pipe Thread � � � � � � � � � � � � � � � � � � � � 20 w/ Plug - Keckley B7 � � � � � � � � � � � � � � � � � � � Lug Unions, Carbon Forged Steel � � � � � � � � � � 11 Strut and Accessories � � � � � � � � � � � � � � � � � � 27 Plugs � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 4 Valves � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 21 27 Street Elbows, 45 � � � � � � � � � � � � � � � � � � � � � � � � � 9 Apollo, Series 70-100 Bronze Ball Valve � � � � � 23 Angle Connector � � � � � � � � � � � � � � � � � � � � � � � � � 27 Street Elbows, 90 � � � � � � � � � � � � � � � � � � � � � � � � � 9 Apollo, Series 73A-100 Square Plate Washers � � � � � � � � � � � � � � � � � � � � 27 Tees � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 10 Carbon Steel Ball Valve � � � � � � � � � � � � � � � � � 23 Strut Channel � � � � � � � � � � � � � � � � � � � � � � � � � � � � 27 Tees, Reducing � � � � � � � � � � � � � � � � � � � � � � � � � � 10 Apollo, Series 76-100A Strut Clamp Nut � � � � � � � � � � � � � � � � � � � � � � � � � 27 Unions � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 11 316 Stainless Steel Ball Valve � � � � � � � � � � � � 24 Strut Pipe Clamps � � � � � � � � � � � � � � � � � � � � � � � � Crane, Series 141TF Bronze Check Valve � � � 25 � � � � � � � � � � � � � � � � � � � 28 Nipples � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 12 Crane, Series 1707 Check Valve � � � � � � � � � � � 25 Clamps and Hangers 29 Black Schedule 40 Carbon Steel Smith Cooper, Series 8155 Brass Ball Valve � 21 Adjustable Swivel Split Ring Hangers � � � � � � � Welded, Domestic � � � � � � � � � � � � � � � � � � � � � 13 Smith Cooper, Series 8501 Beam Clamps � � � � � � � � � � � � � � � � � � � � � � � � � � � 28 Black Schedule 40 Carbon Steel Brass Gate Valve � � � � � � � � � � � � � � � � � � � � � � � 21 Clevis Hangers � � � � � � � � � � � � � � � � � � � � � � � � � � 28 Welded, Import � � � � � � � � � � � � � � � � � � � � � � � � 12 Smith Cooper, Series 9191 Hold Down Clamps � � � � � � � � � � � � � � � � � � � � � � 29 Black Schedule 80 Seamless A106 � � � � � � � � 16 Brass Swing Check Valve � � � � � � � � � � � � � � � 22 Riser Clamps � � � � � � � � � � � � � � � � � � � � � � � � � � � � 29 Black Schedule 80/XH Carbon Steel Smith Cooper, Series SC201 Split Ring Hangers � � � � � � � � � � � � � � � � � � � � � � � 29 Welded, Domestic � � � � � � � � � � � � � � � � � � � � � 14 316 Stainless Steel Ball Valve � � � � � � � � � � � � 22 U-Bolts � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 30 Black Schedule 80/XH Carbon Steel Smith Cooper, Series SC208 Welded, Import � � � � � � � � � � � � � � � � � � � � � � � � 14 304 Stainless Steel Ball Valve � � � � � � � � � � � � 22 Threaded Rod and Accessories � � � � � � � � 31 Brass � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 15 Stockham/Crane, Series B-22T Ceiling Flange, Rod Threaded, Series 128R � 31 25 Galvanized Schedule 40 Carbon Steel Bronze Globe Valve � � � � � � � � � � � � � � � � � � � � � Rod Coupling Nut, Hex Threaded � � � � � � � � � � 31 Welded, Domestic � � � � � � � � � � � � � � � � � � � � � 13 Stockham/Crane, Series B120 Threaded Rod � � � � � � � � � � � � � � � � � � � � � � � � � � � 31 Galvanized Schedule 40 Carbon Steel Bronze Gate Valve � � � � � � � � � � � � � � � � � � � � � � 24 Welded, Import � � � � � � � � � � � � � � � � � � � � � � � � 12 Stockham/Crane, Series B128 Resources � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 32 15 Bronze Gate Valve � � � � � � � � � � � � � � � � � � � � � � 24 Stainless Steel 304 � � � � � � � � � � � � � � � � � � � � � � Manufacturers List � � � � � � � � � � � � � � � � � � � � � � � 32 Stainless Steel 316 � � � � � � � � � � � � � � � � � � � � � � 15 Stockham, Series B321 Check Valve � � � � � � � 25 1-800-849-3900 | www.dillonsupply.com Index | 1 Pipe Fittings, Threaded Bushings, Double Tap Tank BLACK IRON WE OFFER PIPE BUSHINGS BY: PIPE SIZE IMPORT DOMESTIC 4" x 1-1/2" x 1-1/2" 28040204 4" x 2" x 2" 28040202 and others. Bushings, Hex BLACK IRON GALVANIZED IRON FORGED STEEL STAINLESS STEEL BRASS PIPE SIZE IMPORT DOMESTIC IMPORT DOMESTIC IMPORT DOMESTIC 304 316 LEADED 1/4" x 1/8" 30000001 28010201 30000299 28050201 30000729 28070201 27810201 28040201 3/8" x 1/8" 30000002 28010301 30000300 28050301 28070301 3/8" x 1/4" 30000003 28010302 30000301 28050302 30000730 28070302 27810302 28040302 1/2" x 1/8" 30000004 28010401 30000302 28050401 30000731 28070401 27810401 1/2" x 1/4" 30000005 28010402 30000303 28050402 30000732 28070402 27810402 28040402 28090402 1/2" x 3/8" 30000006 28010403 30000304 28050403 30000733 28070403 27810403 28040403 28090403 3/4" x 1/8" 30000007 28010601 30000305 28050601 28070601 3/4" x 1/4" 30000008 28010602 30000306 28050602 30000734 28070602 27810602 28040602 28090602 3/4" x 3/8" 30000009 28010603 30000307 28050603 30000735 28070603 27810603 28040603 28090603 3/4" x 1/2" 30000010 28010604 30000308 28050604 30000736 28070604 27810604 28040604 28090604 1" x 1/4" 30000012 28011002 30000310 28051002 30000737 28071002 27811002 28041002 1" x 3/8" 30000013 28011003 30000311 28051003 30000738 28071003 27811003 1" x 1/2" 30000014 28011004 30000312 28051004 30000739 28071004 27811004 28041004 28091004 1" x 3/4" 30000015 28011006 30000313 28051006 30000740 28071006 27811006 28041006 28091006 1-1/4" x 1/4" 30000016 28011202 30000314 28051202 1-1/4" x 3/8" 30000017 28011203 30000315 28051203 1-1/4" x 1/2" 30000018 28011204 30000316 28051204 28071204 27811204 28091204 1-1/4" x 3/4" 30000019 28011206 30000317 28051206 30000741 28071206 27811206 1-1/4" x 1" 30000020 28011210 30000318 28051210 30000742 28071210 27811210 28041210 1-1/2" x 1/4" 30000021 28011402 30000319 28051402 28011214 1-1/2" x 3/8" 30000022 28011403 30000320 28051403 1-1/2" x 1/2" 30000023 28011404 30000321 28051404 28071404 28041404 28011212 1-1/2" x 3/4" 30000024 28011406 30000322 28051406 30000743 28071406 27811406 28041406 28011216 1-1/2" x 1" 30000025 28011410 30000323 28051410 30000744 28071410 27811410 28041410 28091410 Cont’d. on page 3 1-800-849-3900 | www.dillonsupply.com Pipe Fittings, Threaded | 2 Bushings, Hex (cont’d. from page 2) BLACK IRON GALVANIZED IRON FORGED STEEL STAINLESS STEEL BRASS PIPE SIZE IMPORT DOMESTIC IMPORT DOMESTIC IMPORT DOMESTIC 304 316 LEADED 1-1/2" x 1-1/4" 30000026 28011412 30000324 28051412 30000745 28071412 28041412 28091412 2" x 1/4" 28012002 30000325 28052002 2" x 3/8" 30000027 28012003 2" x 1/2" 30000028 28012004 30000326 28072004 2" x 3/4" 30000029 28012006 30000327 28052006 30000747 28072006 27812006 2" x 1" 30000030 28012010 30000328 28052010 30000748 28072010 27812010 28043216 2" x 1-1/4" 30000031 28012012 30000329 28052012 30000749 28072012 2" x 1-1/2" 30000032 28012014 30000330 28052014 30000750 28072014 27812014 28042014 28092014 2-1/2" x 3/4" 30000033 2-1/2" x 1" 30000034 28012410 2-1/2" x 1-1/4" 30000035 28012412 2-1/2" x 1-1/2" 30000036 28012414 30000331 2-1/2" x 2" 30000037 28012420 30000332 28052420 30000751 28072420 3" x 1" 30000038 28013010 3" x 1-1/4" 30000039 28013012 30000333 28053012 3" x 1-1/2" 28013014 30000334 28053014 3" x 2" 30000041 28013020 30000335 28053020 30000752 28073020 3" x 2-1/2" 30000042 28013024 30000336 28053024 4" x 2" 30000045 28014020 30000337 28054020 4" x 2-1/2" 30000046 28014024 4" x 3" 30000047 28014030 30000338 28054030 5" x 4" 28015040 6" x 4" 28016040 Caps BLACK IRON GALVANIZED IRON FORGED STEEL 3000 300# BLACK STAINLESS STEEL BRASS PIPE SIZE IMPORT DOMESTIC IMPORT DOMESTIC IMPORT DOMESTIC IMPORT 304 316 LEADED 1/8" 30000048 28130100 30000339 28150100 28170100 27820001 28140100 28190100 1/4" 30000049
Load more

Recommended publications
  • Materials Technology – Placement
    MATERIAL TECHNOLOGY 01. An eutectoid steel consists of A. Wholly pearlite B. Pearlite and ferrite C. Wholly austenite D. Pearlite and cementite ANSWER: A 02. Iron-carbon alloys containing 1.7 to 4.3% carbon are known as A. Eutectic cast irons B. Hypo-eutectic cast irons C. Hyper-eutectic cast irons D. Eutectoid cast irons ANSWER: B 03. The hardness of steel increases if it contains A. Pearlite B. Ferrite C. Cementite D. Martensite ANSWER: C 04. Pearlite is a combination of A. Ferrite and cementite B. Ferrite and austenite C. Ferrite and iron graphite D. Pearlite and ferrite ANSWER: A 05. Austenite is a combination of A. Ferrite and cementite B. Cementite and gamma iron C. Ferrite and austenite D. Pearlite and ferrite ANSWER: B 06. Maximum percentage of carbon in ferrite is A. 0.025% B. 0.06% C. 0.1% D. 0.25% ANSWER: A 07. Maximum percentage of carbon in austenite is A. 0.025% B. 0.8% 1 C. 1.25% D. 1.7% ANSWER: D 08. Pure iron is the structure of A. Ferrite B. Pearlite C. Austenite D. Ferrite and pearlite ANSWER: A 09. Austenite phase in Iron-Carbon equilibrium diagram _______ A. Is face centered cubic structure B. Has magnetic phase C. Exists below 727o C D. Has body centered cubic structure ANSWER: A 10. What is the crystal structure of Alpha-ferrite? A. Body centered cubic structure B. Face centered cubic structure C. Orthorhombic crystal structure D. Tetragonal crystal structure ANSWER: A 11. In Iron-Carbon equilibrium diagram, at which temperature cementite changes fromferromagnetic to paramagnetic character? A.
    [Show full text]
  • Malleable Iron Pipe Fittings 150 Lb & 300 Lb Malleable Iron Pipe Fittings Specifications
    ® CORPORATE OFFICE TEL (800) 766-0076 LOCAL (323) 890-4455 FAX (323) 890-4456 WWW.SMITHCOOPER.COM Malleable Iron Pipe Fittings 150 lb & 300 lb Malleable Iron Pipe Fittings Specifications • Manufacturing facilities are ISO 9001:2000 and ISO 14001 • Class 150 China fittings are UL listed and FM approved at 300 PSI • Class 300 China fittings are UL listed ® • Malleable castings conform to ASTM A197 • Hot-dipped galvanized fittings conform to ASTM A153 • Malleable fitting dimensions conform to ASME B16.3 • Malleable bushings, plugs and locknuts conform to ASME B16.14 • Malleable unions conform to ASME B16.39 • NPT threads on all fittings conform to ASME B1.20.1 • Independent lab verification that fittings meet applicable chemical & physical properties SCI Quality Plus • Quality control inspections both at the overseas factory and our US warehouses • All fittings 100% tested under water • Company engineer available at your request • $10,000,000 product liability insurance • SCI trademark logo on each fitting • SCI 5/50 guarantee • Pro Pak System makes products easier to handle and warehouse • Orders shipped with in 24 hours • Fax confirmation of every order • Knowledgeable customer service personnel Warranty and Limitations of Liability SMITH-COOPER INTERNATIONAL (SCI) warrants to its initial purchaser only, that its products which are delivered to this initial purchaser will be of the kind described in the order or price list and will be free of defects in workmanship or material for a period of five years from the date of delivery to our
    [Show full text]
  • Malleable Iron Pipe Fittings from China
    CONTENTS Page Determination ....................................................................................................................... 1 Views of the Commission ....................................................................................................... 3 Information obtained in this review ..................................................................................... I-1 Background ................................................................................................................................ I-1 Responses to the Commission’s notice of institution ............................................................... I-1 Individual responses .............................................................................................................. I-1 Party comments on adequacy ............................................................................................... I-2 The original investigation and subsequent reviews .................................................................. I-3 The original investigation ...................................................................................................... I-3 The first five-year review ....................................................................................................... I-3 The second five-year review .................................................................................................. I-4 Previous and related investigations .........................................................................................
    [Show full text]
  • Enghandbook.Pdf
    785.392.3017 FAX 785.392.2845 Box 232, Exit 49 G.L. Huyett Expy Minneapolis, KS 67467 ENGINEERING HANDBOOK TECHNICAL INFORMATION STEELMAKING Basic descriptions of making carbon, alloy, stainless, and tool steel p. 4. METALS & ALLOYS Carbon grades, types, and numbering systems; glossary p. 13. Identification factors and composition standards p. 27. CHEMICAL CONTENT This document and the information contained herein is not Quenching, hardening, and other thermal modifications p. 30. HEAT TREATMENT a design standard, design guide or otherwise, but is here TESTING THE HARDNESS OF METALS Types and comparisons; glossary p. 34. solely for the convenience of our customers. For more Comparisons of ductility, stresses; glossary p.41. design assistance MECHANICAL PROPERTIES OF METAL contact our plant or consult the Machinery G.L. Huyett’s distinct capabilities; glossary p. 53. Handbook, published MANUFACTURING PROCESSES by Industrial Press Inc., New York. COATING, PLATING & THE COLORING OF METALS Finishes p. 81. CONVERSION CHARTS Imperial and metric p. 84. 1 TABLE OF CONTENTS Introduction 3 Steelmaking 4 Metals and Alloys 13 Designations for Chemical Content 27 Designations for Heat Treatment 30 Testing the Hardness of Metals 34 Mechanical Properties of Metal 41 Manufacturing Processes 53 Manufacturing Glossary 57 Conversion Coating, Plating, and the Coloring of Metals 81 Conversion Charts 84 Links and Related Sites 89 Index 90 Box 232 • Exit 49 G.L. Huyett Expressway • Minneapolis, Kansas 67467 785-392-3017 • Fax 785-392-2845 • [email protected] • www.huyett.com INTRODUCTION & ACKNOWLEDGMENTS This document was created based on research and experience of Huyett staff. Invaluable technical information, including statistical data contained in the tables, is from the 26th Edition Machinery Handbook, copyrighted and published in 2000 by Industrial Press, Inc.
    [Show full text]
  • Engineering Materials and Processes Lecture 4 – Crystal Structure of Metals
    Engineering Materials and Processes Lecture 4 – Crystal Structure of Metals Grains after acid etching: Wikipedia Crystal Structure of Metals Reference Text Section Higgins RA & Bolton, 2010. Materials for Engineers and Technicians, Ch 4 5th ed, Butterworth Heinemann Additional Readings Section Sheedy, P. A, 1994. Materials : Their properties, testing and selection Ch 1 Callister, W. Jr. and Rethwisch, D., 2010, Materials Science and Ch 3 Engineering: An Introduction, 8th Ed, Wiley, New York. Engineering Materials and Processes Crystal Structure of Metals Crystals are the lattice structure that metal atoms form when they become solid. In engineering, crystals of metal are called grains. Grains in cast aluminium www.spaceflight.esa.int Engineering Materials and Processes Solid, Liquid, Gas Everything can exist as either solid, liquid or gas. (state). This depends on temperature and pressure. Mercury freezes at -9°C and boils (to form a gas or vapour) at 357°C at 1 atm. Liquid Mercury: Wikipedia At the other end of the scale, tungsten melts at 3410°C and ° Mercury vapour streetlights: theage.com.au boils at 5930 C. Engineering Materials and Processes Classification of Materials by State • Solid: Rigid structure of atoms (or molecules). A regular pattern of atoms is called a crystal (ceramics) or a grain (metals). Random is called amorphous (some plastics). Low temperature all materials freeze (become solid). • Liquid: A liquid is a substance that flows (fluid) but does not compress easily. Solids become liquid when heated to their melting point (fusion) • Gas: A gas is a compressible fluid, that expands to fill its container. At high temperature all materials vapourise to a gas.
    [Show full text]
  • Unit 11 - Week 10
    24/07/2018 Phase Diagrams in Materials Science and Engineering - - Unit 11 - Week 10 X [email protected] ▼ Courses » Phase Diagrams in Materials Science and Engineering Announcements Course Ask a Question Progress Mentor Unit 11 - Week 10 Course outline Week 10 Assignment 10 The due date for submitting this assignment has passed. Due on 2016-04-04, 23:55 IST. How to access the portal Submitted assignment Week 1 Week 2 1) In gray cast iron,carbon is present in the form of 2 points Week 3 cementite flakes Week 4 free carbon Week 5 spheroids No, the answer is incorrect. Week 6 Score: 0 Week 7 Accepted Answers: flakes Week 8 2) White cast iron contains carbon in the form of 2 points Week 9 free carbon flakes Week 10 cementite Lecture 40 : ferrite Alloyed Cast Iron No, the answer is incorrect. Score: 0 Lecture 41 : Phase Diagram Accepted Answers: for different cementite Solid State Reaction 3) Annealing of white cast iron results in production of 2 points Lecture 42 : malleable iron Phase Diagram of Ceramic nodular iron gray iron Lecture 43 : Ternary Phase none of the above Diagram-I No, the answer is incorrect. Lecture 44 : Score: 0 Ternary Phase Accepted Answers: Diagram-II malleable iron Quiz : Week 10 Assignment 10 4) Grey cast iron 2 points Week 11 Contains 1.7 to 3.5 % carbon in free state and is obtained by the slow cooling of molten cast iron Week 12 is also known as chilled cast iron is obtained by cooling rapidly https://onlinecourses.nptel.ac.in/noc16_mm05/unit?unit=93&assessment=100 1/4 24/07/2018 Phase Diagrams in Materials Science and Engineering - - Unit 11 - Week 10 is produced by annealing process.
    [Show full text]
  • Heat Treatment and Properties of Iron and Steel
    National Bureau of Standards Library, N.W. Bldg NBS MONOGRAPH 18 Heat Treatment and Properties of Iron and Steel U.S. DEPARTMENT OF COMMERCE NATIONAL BUREAU OF STANDARDS THE NATIONAL BUREAU OF STANDARDS Functions and Activities The functions of the National Bureau of Standards are set forth in the Act of Congress, March 3, 1901, as amended by Congress in Public Law 619, 1950. These include the development and maintenance of the national standards of measurement and the provision of means and methods for making measurements consistent with these standards; the determination of physical constants and properties of materials; the development of methods and instruments for testing materials, devices, and structures; advisory services to government agencies on scientific and technical problems; inven- tion and development of devices to serve special needs of the Government; and the development of standard practices, codes, and specifications. The work includes basic and applied research, develop- ment, engineering, instrumentation, testing, evaluation, calibration services, and various consultation and information services. Research projects are also performed for other government agencies when the work relates to and supplements the basic program of the Bureau or when the Bureau's unique competence is required. The scope of activities is suggested by the listing of divisions and sections on the inside of the back cover. Publications The results of the Bureau's work take the form of either actual equipment and devices or pub- lished papers.
    [Show full text]
  • Cast Iron Is the Name Given to Those Ferrous Metals Containing More Than 1.7% Carbon
    INTRODUCTION Cast iron is the name given to those ferrous metals containing more than 1.7% carbon. Cast irons like steels, are basically alloys of iron and carbon. Cast irons contain more than 2 percent carbon. Most commercially manufactured types are in the range of 2.5 to 4 percent carbon. CAST IRON SKILLET ASTM-888 CAST IRON PIPE COMPOSITION All cast irons contain more than 2% C. Cast iron is the alloy of carbon with 1.7 to 4.5% carbon and 0.5 to 3% silicon. But in some alloy it has Manganese 0.5 to 1.0%, Phosphorous 0.1 to 0.9 %, & Sulphur 0.07 to 0.10%. STRUCTURE It have a matrix structure which may be established either during cooling from the molten state ( as cast condition) or as a result of heat treatment. The main component of cast iron are Iron, carbon, silicon. TYPES OF CAST IRON The best method of classifying cast iron is according to metallographic structure. There are four variables to be considered which lead to the different types of cast iron. Some variables may control the condition of the carbon and also its physical form. The types of cast iron are as follows: 1. White Cast Iron 2. Malleable Cast Iron 3. Gray Cast Iron 4. Chilled Cast Iron 5. Nodular Cast Iron 6. Alloy Cast Iron 1. WHITE CAST IRON It is the cast iron in which all the cast iron in the combined form as cementite. All white cast iron are hypoeutectic. In the figure the alloy at “x” exists as a uniform liquid solution of carbon dissolved in liquid iron.
    [Show full text]
  • The Effect of Nickel Upon the Stability of Iron Carbide and Upon the Microscopic Structure of White Cast Iron Compositions Milo J
    Iowa State University Capstones, Theses and Retrospective Theses and Dissertations Dissertations 1927 The effect of nickel upon the stability of iron carbide and upon the microscopic structure of white cast iron compositions Milo J. Stutzman Iowa State College Follow this and additional works at: https://lib.dr.iastate.edu/rtd Part of the Physical Chemistry Commons Recommended Citation Stutzman, Milo J., "The effect of nickel upon the stability of iron carbide and upon the microscopic structure of white cast iron compositions" (1927). Retrospective Theses and Dissertations. 14683. https://lib.dr.iastate.edu/rtd/14683 This Dissertation is brought to you for free and open access by the Iowa State University Capstones, Theses and Dissertations at Iowa State University Digital Repository. It has been accepted for inclusion in Retrospective Theses and Dissertations by an authorized administrator of Iowa State University Digital Repository. For more information, please contact [email protected]. INFORMATION TO USERS This manuscript has been reproduced from the microfilm master. UMI films the text directly from the original or copy submitted. Thus, some thesis and dissertation copies are in typewriter face, while others may be from any type of computer printer. The quality of this reproduction is dependent upon the quality of the copy submitted. Broken or indistinct print, colored or poor quality illustrations and photographs, print bleedthrough, substandard margins, and improper alignment can adversely affect reproduction. In the unlikely event that the author did not send UMI a complete manuscript and there are missing pages, these will be noted. Also, if unauthorized copyright material had to be removed, a note will indicate the deletion.
    [Show full text]
  • Iron Classification Codes and Characteristics
    Iron Alloys Joseph S. Santner, American Foundry Society, Schaumburg, Illinois George M. Goodrich, Professional Metallurgical Services, Buchanan, Michigan ron castings are produced by a variety Iof molding methods and are available with a wide range of properties. Cast iron is a generic term that designates a family of metals. To achieve the best casting for a particular application at the lowest cost consistent with the component’s require- ments, it is necessary to have an under- standing of the six types of cast iron: • gray iron; • ductile iron; • compacted graphite iron (CGI); • malleable iron; • white iron; • alloyed iron. Table 1 lists the typical composition ranges for common elements in fi ve of the six generic types of cast iron. The classification for alloyed irons has a wide range of base compositions with major additions of other elements, such as nickel, chromium, molybdenum This gray iron manifold for wheel loaders was developed by the casting supplier and cus- or copper. tomer from concept-to-casting in less than one month. The new design cut the processing The basic strength and hardness of time of the component in half. all iron alloys is provided by the metallic structures containing graphite. The prop- shape (sphericity) and volume fraction of oxidation and corrosion by developing erties of the iron matrix can range from the graphite phase (percent free carbon). a tightly adhering oxide and subscale those of soft, low-carbon steel (18 ksi/124 Because of their relatively high sili- to repel further attack. Iron castings are MPa) to those of hardened, high-carbon con content, cast irons inherently resist used in applications where this resistance steel (230 ksi/1,586 MPa).
    [Show full text]
  • Microstructure of Ferrous Alloys By: George Vander Voort
    Published by Buehler, a division of Illinois Tool Works Volume 3, Issue 7 Microstructure of Ferrous Alloys By: George Vander Voort Introduction for revealing ferrite in a martensite matrix and for revealing ferrite The microstructure of iron-based alloys is very complicated and grain boundaries in low-carbon steels. Picral is better for revealing diverse, being influenced by composition, homogeneity, processing the cementite in ferritic alloys and the structure of ferrite-cementite and section size. Microstructures of castings look different than constituents, pearlite and bainite. Nital and picral both dissolve those of wrought products, even of the same composition and if ferrite but nital’s dissolution rate is a function of crystal orientation given the same heat treatment. In general, it is easiest to identify while picral’s rate is uniform. Aqueous sodium metabisulfite reveals heat-treated structures after transformation and before tempering. ferrite grain boundaries, will color some of the ferrite grains (some For example, if a mixed microstructure of bainite and martensite stay white), reveals pearlite and bainite much like picral but also is formed during quenching, these constituents will become more etches martensite nicely, as-quenched or tempered. Other reagents difficult to identify reliably as the tempering temperature given the have their uses, especially when dealing with higher alloy grades, product increases towards the lower critical temperature. Further, such as tool steels and stainless steels, or when trying to selectively while ferrous metallographers tend to use nital almost exclusively reveal certain constituents or prior-austenite grain boundaries. for etching, nital is not always the best reagent to use to properly Etchants for steels are listed in many standard textbooks and reveal all microstructures.
    [Show full text]
  • Metal Alloys
    Metal Alloys Most engineering metallic materials are alloys. Metals are alloyed to enhance their properties, such as strength, hardness or corrosion resistance, and to create new properties, such as shape memory effect. Engineering alloys can be broadly divided into Ferrous Alloys and Non‐ferrous Alloys. Metal Global demand Price $/tonne Market $ billion tonnes, x1000 Steel 730,000 400 292 Aluminium 20,000 1,500 30 Stainless steel 13,000 2,000 26 Titanium 56 35,000 2 Nickel 1,000 12,000 Copper 10,000 FerrousFerrous AlloysAlloys Metal Alloys Ferrous Non‐ferrous Steels Cast irons Carbon Low Alloy High Alloy Grey iron Nodular iron Low‐C e.g., HSLA Stainless High‐Mn Tool White iron Medium‐C (Mo,V,W,Cr,Ni) (<5% total Malleable iron High‐C (>5% total alloying alloying elements) Alloy cast irons Tool elements) Ferrous Alloys ‐Alloys containing Fe as the main element. ‐The most important ferrous alloy system (Fe‐C system) ‐Alloys of this system can be further divided into steels and cast irons. ‐Steels contain less C (generally <1.4wt%C) than do cast irons (generally 2.4~4.3wt%C). ‐Then, all steels solidify into a single γ‐Fe structure first and then experience the complex eutectoid reaction. Therefore, heat treatment processes, which alter the eutectoid reaction, are vitally important for controlling microstructure and properties of steels. ‐Cast irons experience complex eutectic reaction during solidification, due to the formation of graphite or cementite. Solidification control is the most important single factor for properties of cast irons. Steel Cast Iron Plain Carbon Steels Low carbon steels (mild steels): 0.1‐0.25%C proeutectoid F + small amount of P high formability, high ductility: elongation: ~30% relatively low strength: yield strength: 250~400MPa (0.15% carbon steel) excellent weldability cannot be strengthened by heat treatment usually strengthened by cold working typical applications: pipes, panels, sheets, wires, I‐beams etc.
    [Show full text]