DOCSLIB.ORG

2020 Florida Space Day Handout

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
2020 Florida Space Day Handout 2020 Florida Space Day is a milestone event that presents an opportunity to educate and bring awareness to Florida legislators on the significance of the aerospace industry and its impact on Florida’s economy. Florikan Scientific Instruments Scientific Lighting Solutions Zero Gravity Solutions BIOS Lighting Sarasota County Palm Beach County Brevard County Palm Beach County Brevard County The aerospace industry represents billions of dollars Has partnered with Supplies Kennedy Space Builds high-speed camera Has developed a micronutrient Is using NASA LED technology in annual economic impact and employs NASA multiple times to Center, as well as other space systems to detect and map formula, BAM-FX, that increases to create lighting systems for create a more robust and medical companies, with lightning strikes before the nutritional value and yield of unique applications, such as thousands of residents in the state’s 67 counties. polymer coating for its silicon diode sensors capable launches. The technology also crops. Nutrient-rich foods like maximizing plant photosynthesis controlled-release of tracking temperatures has applications in protecting these will be necessary for future and inducing wakefulness in fertilizer and to develop hundreds of degrees wind farms and investigating long-term space missions. humans by outputting only fertilizer to meet the below zero. insurance claims. certain wavelengths of light. needs of plants growing in space. 2020 SPACE DAY PARTNERS ECONOMIC DEVELOPMENT COMMISSION FLORIDA’S SPACE COAST FloridaSpaceDay.com » #FLSpaceDay The Florida Space Day is an organized and united effort to communicate to the Governor, Lt. Governor and Legislators an appreciation of their support to the space industry, educate them on the state wide economic impact of space and to develop and advocate for key initiatives that will enhance the competitiveness and viability of the state of Florida in the space sector. 2020 2020 INI N FLORIDAFLO RIDA Okaloosa TOP 10 COUNTIES GLOBAL SPACE ACTIVITY GROWTH CONTINUES Duval BY AEROSPACE 16,000 COMPANY REVENUE ARE HIGHLIGHTED AEROSPACE 61% GROWTH COMPANIES ACROSS Brevard 32% GROWTH Orange ALL67 Hillsborough Pinellas COUNTIES St. Lucie $ CREATE Palm $ $ $ B Beach 257B 314B 384B 415 Broward 2008 2013 2017 2018 TOTAL Miami Dade 8 REVENUES$ + % GROWTH OF Resource: The Space Report, Space Foundation 19B Resource: Florida State University, based on FY2015 data HIGHLIGHTS OF SPACE PROGRAMS IN FLORIDA United SpaceX SpaceX NASA/ Boeing Blue Northrop Aerojet Launch Lockheed Origin Grumman Rocketdyne Alliance Martin (Space Launch (CST-100 Starliner) System) (Atlas V) (Falcon 9 First Stage) (Dragon) (Orion) (X-37B) (Phantom Express) (New Shepard) (OmegA Rocket) (RL10 Engine) • 135 Successful launches since ULA • More than 70 successful launches • Crew Dragon preparing to launch • Manufactured, assembled & launched • Starliner is the first commercial • A fully reusable vertical takeoff, • A new, American intermediate- and • Manufactured in South Florida formation in December 2006 since 2010 NASA Astronauts to space from Kennedy Space Center/NASA spacecraft built in Florida, a reusable vertical landing vehicle large-class space launch vehicle since 1962 • 80 Successful Atlas V launches since • The World’s only provider of reusable • Cargo Dragon currently providing • Only spacecraft engineered for human capsule for cost-effective rides to ISS • Launched from Florida’s Space Coast • Capable of launching the full range of • Powers ULA’s Atlas V, Delta IV, and Aug 2002 orbital-class launch vehicles uncrewed resupply to ISS deep space exploration (Moon/Mars) • Space Launch System is the largest • Quickly propels a crew 100 km above national security missions & science Vulcan; Northrop Grumman’s Omega; • 500 Employees & 350 ULA Suppliers • Nearly 50 successful first stage rocket • Launches from Florida atop a Falcon 9 • Orion/Artemis 1 & 2 spacecraft in rocket built, launching crew, Orion, Earth and commercial payloads and NASA’s SLS Upper Stages in Florida landings since 2015 process to support initial Lunar and massive cargo to the Moon for • Northrup Grumman is also building • Highest-performance rocket engine NASA’s Artemis program • Capsule and engine return to Earth • A 5-year Supplier Spend of $2B in • Launching STARLINK high-speed missions after spaceflight the boosters that will be used by in production in the world • X-37B is USAF’s uncrewed, reusable NASA’s Space Launch System Florida global satellite broadband system • Orion Production Contract signed for • Over 1 Million Square Feet of 21st from Florida work at KSC through 2030, including vehicle with technologies that support • The 22-million-hp SLS booster is long-term space objectives Century Manufacturing & Launch vehicle to carry first woman and next Infrastructure the largest solid rocket booster ever man to the Moon • Phantom Express is a reusable built for flight spaceplane providing rapid access to space, landing on a runway after its mission.
Load more

Recommended publications
  • Vulcan Centaur
    VULCAN CENTAUR The Vulcan Centaur rocket design leverages the flight-proven success of the Delta IV and Atlas V launch vehicles while introducing new technologies and innovative features to ensure a reliable and aordable space launch service. Vulcan Centaur will service a diverse range of markets including 225 ft commercial, civil, science, cargo and national security space customers. 1 The spacecraft is encapsulated in a 5.4-m- (17.7-ft-) diameter payload fairing (PLF), a sandwich composite structure made with a vented aluminum-honeycomb core and graphite-epoxy face sheets. The bisector (two-piece shell) PLF encapsulates the spacecraft. The payload attach fitting (PAF) is a similar sandwich composite structure creating the mating interface from spacecraft to second stage. The PLF separates using a debris-free horizontal and vertical separation system with 2 200 ft spring packs and frangible joint assembly. The payload fairing is available in the 15.5-m (51-ft) standard and 21.3-m (70-ft) 1 long configurations. The Centaur upper stage is 5.4 m (17.7 ft) in diameter and 3 11.7 m (38.5 ft) long with a 120,000-lb propellant capacity. Its propellant tanks are constructed of pressure-stabilized, corrosion-resistant stainless steel. Centaur is a liquid hydrogen/liquid oxygen-fueled vehicle, with two RL10C 4 engines. The Vulcan Centaur Heavy vehicle, flies the upgraded 2 Centaur using RL10CX engines with nozzle extensions. The 5 175 ft cryogenic tanks are insulated with spray-on foam insulation (SOFI) to manage boil o of cryogens during flight. An aft equipment shelf provides the structural mountings for vehicle electronics.
    [Show full text]
  • Douglas Missile & Space Systems Division
    ·, THE THOR HISTORY. MAY 1963 DOUGLAS REPORT SM-41860 APPROVED BY: W.H.. HOOPER CHIEF, THOR SYSTEMS ENGINEERING AEROSPACE SYSTEMS ENGINEERING DOUGLAS MISSILE & SPACE SYSTEMS DIVISION ABSTRACT This history is intended as a quick orientation source and as n ready-reference for review of the Thor and its sys­ tems. The report briefly states the development of Thor, sur'lli-:arizes and chronicles Thor missile and booster launch­ inGs, provides illustrations and descriptions of the vehicle systcn1s, relates their genealogy, explains sane of the per­ fon:iance capabilities of the Thor and Thor-based vehicles used, and focuses attention to the exploration of space by Douelas Aircraf't Company, Inc. (DAC). iii PREFACE The purpose of The Thor History is to survey the launch record of the Thor Weapon, Special Weapon, and Space Systems; give a systematic account of the major events; and review Thor's participation in the military and space programs of this nation. The period covered is from December 27, 1955, the date of the first contract award, through May, 1963. V �LE OF CONTENTS Page Contract'Award . • • • • • • • • • • • • • • • • • • • • • • • • • 1 Background • • • • • • • • • • • • • • • • • • • • • • • • • • • • l Basic Or�anization and Objectives • • • • • • • • • • • • • • • • 1 Basic Developmenta� Philosophy . • • • • • • • • • • • • • • • • • 2 Early Research and Development Launches • • • ·• • • • • • • • • • 4 Transition to ICBM with Space Capabilities--Multi-Stage Vehicles . 6 Initial Lunar and Space Probes ••••••• • • • • • • •
    [Show full text]
  • Space Launch System (Sls) Motors
    Propulsion Products Catalog SPACE LAUNCH SYSTEM (SLS) MOTORS For NASA’s Space Launch System (SLS), Northrop Grumman manufactures the five-segment SLS heavy- lift boosters, the booster separation motors (BSM), and the Launch Abort System’s (LAS) launch abort motor and attitude control motor. The SLS five-segment booster is the largest solid rocket motor ever built for flight. The SLS booster shares some design heritage with flight-proven four-segment space shuttle reusable solid rocket motors (RSRM), but generates 20 percent greater average thrust and 24 percent greater total impulse. While space shuttle RSRM production has ended, sustained booster production for SLS helps provide cost savings and access to reliable material sources. Designed to push the spent RSRMs safely away from the space shuttle, Northrop Grumman BSMs were rigorously qualified for human space flight and successfully used on the last fifteen space shuttle missions. These same motors are a critical part of NASA’s SLS. Four BSMs are installed in the forward frustum of each five-segment booster and four are installed in the aft skirt, for a total of 16 BSMs per launch. The launch abort motor is an integral part of NASA’s LAS. The LAS is designed to safely pull the Orion crew module away from the SLS launch vehicle in the event of an emergency on the launch pad or during ascent. Northrop Grumman is on contract to Lockheed Martin to build the abort motor and attitude control motor—Lockheed is the prime contractor for building the Orion Multi-Purpose Crew Vehicle designed for use on NASA’s SLS.
    [Show full text]
  • Rocket Nozzles: 75 Years of Research and Development
    Sådhanå Ó (2021) 46:76 Indian Academy of Sciences https://doi.org/10.1007/s12046-021-01584-6Sadhana(0123456789().,-volV)FT3](0123456789().,-volV) Rocket nozzles: 75 years of research and development SHIVANG KHARE1 and UJJWAL K SAHA2,* 1 Department of Energy and Process Engineering, Norwegian University of Science and Technology, 7491 Trondheim, Norway 2 Department of Mechanical Engineering, Indian Institute of Technology Guwahati, Guwahati 781039, India e-mail: [email protected]; [email protected] MS received 28 August 2020; revised 20 December 2020; accepted 28 January 2021 Abstract. The nozzle forms a large segment of the rocket engine structure, and as a whole, the performance of a rocket largely depends upon its aerodynamic design. The principal parameters in this context are the shape of the nozzle contour and the nozzle area expansion ratio. A careful shaping of the nozzle contour can lead to a high gain in its performance. As a consequence of intensive research, the design and the shape of rocket nozzles have undergone a series of development over the last several decades. The notable among them are conical, bell, plug, expansion-deflection and dual bell nozzles, besides the recently developed multi nozzle grid. However, to the best of authors’ knowledge, no article has reviewed the entire group of nozzles in a systematic and comprehensive manner. This paper aims to review and bring all such development in one single frame. The article mainly focuses on the aerodynamic aspects of all the rocket nozzles developed till date and summarizes the major findings covering their design, development, utilization, benefits and limitations.
    [Show full text]
  • L AUNCH SYSTEMS Databk7 Collected.Book Page 18 Monday, September 14, 2009 2:53 PM Databk7 Collected.Book Page 19 Monday, September 14, 2009 2:53 PM
    databk7_collected.book Page 17 Monday, September 14, 2009 2:53 PM CHAPTER TWO L AUNCH SYSTEMS databk7_collected.book Page 18 Monday, September 14, 2009 2:53 PM databk7_collected.book Page 19 Monday, September 14, 2009 2:53 PM CHAPTER TWO L AUNCH SYSTEMS Introduction Launch systems provide access to space, necessary for the majority of NASA’s activities. During the decade from 1989–1998, NASA used two types of launch systems, one consisting of several families of expendable launch vehicles (ELV) and the second consisting of the world’s only partially reusable launch system—the Space Shuttle. A significant challenge NASA faced during the decade was the development of technologies needed to design and implement a new reusable launch system that would prove less expensive than the Shuttle. Although some attempts seemed promising, none succeeded. This chapter addresses most subjects relating to access to space and space transportation. It discusses and describes ELVs, the Space Shuttle in its launch vehicle function, and NASA’s attempts to develop new launch systems. Tables relating to each launch vehicle’s characteristics are included. The other functions of the Space Shuttle—as a scientific laboratory, staging area for repair missions, and a prime element of the Space Station program—are discussed in the next chapter, Human Spaceflight. This chapter also provides a brief review of launch systems in the past decade, an overview of policy relating to launch systems, a summary of the management of NASA’s launch systems programs, and tables of funding data. The Last Decade Reviewed (1979–1988) From 1979 through 1988, NASA used families of ELVs that had seen service during the previous decade.
    [Show full text]
  • Status of the Space Shuttle Solid Rocket Booster
    The Space Congress® Proceedings 1980 (17th) A New Era In Technology Apr 1st, 8:00 AM Status of The Space Shuttle Solid Rocket Booster William P. Horton Solid Rocket Booster Engineering Office, George C. Marshall Space Flight Center, Follow this and additional works at: https://commons.erau.edu/space-congress-proceedings Scholarly Commons Citation Horton, William P., "Status of The Space Shuttle Solid Rocket Booster" (1980). The Space Congress® Proceedings. 3. https://commons.erau.edu/space-congress-proceedings/proceedings-1980-17th/session-1/3 This Event is brought to you for free and open access by the Conferences at Scholarly Commons. It has been accepted for inclusion in The Space Congress® Proceedings by an authorized administrator of Scholarly Commons. For more information, please contact [email protected]. STATUS OF THE SPACE SHUTTLE SOLID ROCKET BOOSTER William P. Horton, Chief Engineer Solid Rocket Booster Engineering Office George C. Marshall Space Flight Center, AL 35812 ABSTRACT discuss retrieval and refurbishment plans for Booster reuse, and will address Booster status Two Solid Rocket Boosters provide the primary for multimission use. first stage thrust for the Space Shuttle. These Boosters, the largest and most powerful solid rocket vehicles to meet established man- BOOSTER CONFIGURATION rated design criteria, are unique in that they are also designed to be recovered, refurbished, It is appropriate to review the Booster config­ and reused. uration before describing the mission profile. The Booster is 150 feet long and is 148 inches The first SRB f s have been stacked on the in diameter (Figure 1), The inert weight Mobile Launch Platform at the Kennedy Space is 186,000 pounds and the propellant weight is Center and are ready to be mated with the approximately 1.1 million pounds for each External Tank and Orbiter in preparation for Booster.
    [Show full text]
  • ESPA Ring Datasheet
    PAYLOAD ADAPTERS | ESPA ESPA THE EVOLVED SECONDARY PAYLOAD ADAPTER ESPA mounts to the standard NSSL (formerly EELV) interface bolt pattern (Atlas V, Falcon 9, Delta IV, OmegA, Vulcan, Courtesy of Lockheed Martin New Glenn) and is a drop-in component in the launch stack. Small payloads mount to ESPA ports featuring either a Ø15-inch bolt circle with 24 fasteners or a 4-point mount with pads at each corner of a 15-inch square; both of these interfaces have become small satellite standards. ESPA is qualified to carry 567 lbs (257 kg), and a Heavy interface Courtesy of NASA (with Ø5/16” fastener hardware) has been introduced with a capacity of 991 lbs (450 kg). All small satellite mass capabilities require the center of gravity (CG) to be within 20 inches (50.8 cm) of the ESPA port surface. Alternative configurations can be accommodated. ESPA GRANDE ESPA Grande is a more capable version of ESPA with Ø24-inch ports; the ring height is typically 42 inches. The Ø24-inch port has been qualified by test to Courtesy of ORBCOMM & Sierra Nevada Corp. carry small satellites up to 1543 lb (700 kg). ESPA ESPA IS ADAPTABLE TO UNIQUE MISSION REQUIREMENTS • The Air Force’s STP-1 mission delivered multiple small satellites on an Atlas V. • NASA’s Lunar Crater Observation and Sensing Satellite (LCROSS): ESPA was the spacecraft hub for the LCROSS shepherding satellite in 2009. • ORBCOMM Generation 2 (OG2) launched stacks of two and three ESPA Grandes on two different Falcon 9 missions and in total deployed 17 satellites.
    [Show full text]
  • Orbital Fueling Architectures Leveraging Commercial Launch Vehicles for More Affordable Human Exploration
    ORBITAL FUELING ARCHITECTURES LEVERAGING COMMERCIAL LAUNCH VEHICLES FOR MORE AFFORDABLE HUMAN EXPLORATION by DANIEL J TIFFIN Submitted in partial fulfillment of the requirements for the degree of: Master of Science Department of Mechanical and Aerospace Engineering CASE WESTERN RESERVE UNIVERSITY January, 2020 CASE WESTERN RESERVE UNIVERSITY SCHOOL OF GRADUATE STUDIES We hereby approve the thesis of DANIEL JOSEPH TIFFIN Candidate for the degree of Master of Science*. Committee Chair Paul Barnhart, PhD Committee Member Sunniva Collins, PhD Committee Member Yasuhiro Kamotani, PhD Date of Defense 21 November, 2019 *We also certify that written approval has been obtained for any proprietary material contained therein. 2 Table of Contents List of Tables................................................................................................................... 5 List of Figures ................................................................................................................. 6 List of Abbreviations ....................................................................................................... 8 1. Introduction and Background.................................................................................. 14 1.1 Human Exploration Campaigns ....................................................................... 21 1.1.1. Previous Mars Architectures ..................................................................... 21 1.1.2. Latest Mars Architecture .........................................................................
    [Show full text]
  • Atlas V Cutaway Poster
    ATLAS V Since 2002, Atlas V rockets have delivered vital national security, science and exploration, and commercial missions for customers across the globe including the U.S. Air Force, the National Reconnaissance Oice and NASA. 225 ft The spacecraft is encapsulated in either a 5-m (17.8-ft) or a 4-m (13.8-ft) diameter payload fairing (PLF). The 4-m-diameter PLF is a bisector (two-piece shell) fairing consisting of aluminum skin/stringer construction with vertical split-line longerons. The Atlas V 400 series oers three payload fairing options: the large (LPF, shown at left), the extended (EPF) and the extra extended (XPF). The 5-m PLF is a sandwich composite structure made with a vented aluminum-honeycomb core and graphite-epoxy face sheets. The bisector (two-piece shell) PLF encapsulates both the Centaur upper stage and the spacecraft, which separates using a debris-free pyrotechnic actuating 200 ft system. Payload clearance and vehicle structural stability are enhanced by the all-aluminum forward load reactor (FLR), which centers the PLF around the Centaur upper stage and shares payload shear loading. The Atlas V 500 series oers 1 three payload fairing options: the short (shown at left), medium 18 and long. 1 1 The Centaur upper stage is 3.1 m (10 ft) in diameter and 12.7 m (41.6 ft) long. Its propellant tanks are constructed of pressure-stabilized, corrosion-resistant stainless steel. Centaur is a liquid hydrogen/liquid oxygen-fueled vehicle. It uses a single RL10 engine producing 99.2 kN (22,300 lbf) of thrust.
    [Show full text]
  • Space Coast Is Getting Busy: 6 New Rockets Coming to Cape Canaveral, KSC
    4/16/2019 Space Coast is getting busy: 6 new rockets coming to Cape Canaveral, KSC Space Coast is getting busy: 6 new rockets coming to Cape Canaveral, Kennedy Space Center Emre Kelly, Florida Today Published 4:04 p.m. ET April 11, 2019 | Updated 7:53 a.m. ET April 12, 2019 COLORADO SPRINGS, Colo. – If schedules hold, the Space Coast will live up to its name over the next two years as a half-dozen new rockets target launches from sites peppered across the Eastern Range. Company, government and military officials here at the 35th Space Symposium, an annual space conference, have reaffirmed their plans to launch rockets ranging from more traditional heavy-lift behemoths to smaller vehicles that take advantage of new manufacturing technologies. Even if some of these schedules slip, at least one thing is apparent to several spaceflight experts here: The Eastern Range is seeing an unprecedented growth in commercial space companies and efforts. Space Launch System: 2020 NASA's Space Launch System rocket launches from Kennedy Space Center's pad 39B in this rendering by the agency. (Photo: NASA) NASA's long-awaited SLS, a multibillion-dollar rocket announced in 2011, is slated to become the most powerful launch vehicle in history if it can meet a stringent late 2020 deadline. The 322-foot-tall rocket is expected to launch on its first flight – Exploration Mission 1 – from Kennedy Space Center with an uncrewed Orion capsule for a mission around the moon, which fits in with the agency's wider goal of putting humans on the surface by 2024.
    [Show full text]
  • Abstract US Patent References
    Architecture for Reusable Responsive Exploration Systems: ARES - Platform and Reusable Responsive Architecture for Innovative Space Exploration: PRAISE (Part 1) PATENT PENDING Abstract A comprehensive Modular Reusable Responsive Space Exploration Platform (Architecture) composed of multiple modular reusable elements such that the assemblies can be flexibly configured into systems for low earth orbits launches and for long-range exploration such as orbits to moon, Lagrange points and others. This platform & architecture is named as Architecture for Reusable Responsive Exploration System (acronym ARES) / Platform and Reusable Responsive Architecture for Innovative Space Exploration (acronym PRAISE), in short ARES/PRAISE or simply ARES. It is also known as Alpha Spaces Architecture and Platform (acronym ASAP), in short as “αPlatform” or “αArchitecture”, or “αAres”. As an example, the configuration involves reusable lightweight wing, core stage, (optional booster stages) combination of expendable upper stage and reusable crew capsule. Further, the expendable upper stage can be re-used to serve as in-orbit fuel depots and for other innovative uses. This is first part of the multi part patent application. Inventor: Atreya, Dinesh S. US Patent References US Patent 6158693 - Recoverable booster stage and recovery method US Patent 4878637 - Modular space station US Patent 6726154 - Reusable space access launch vehicle system US Patent 6113032 - Delivering liquid propellant in a reusable booster stage US Patent 4557444 - Aerospace vehicle US Patent 4880187 - Multipurpose modular spacecraft US Patent 4452412 - Space shuttle with rail system and aft thrust structure securing solid rocket boosters to external tank US Patent 4802639 - Horizontal-takeoff transatmospheric launch system US Patent 4884770 - Earth-to-orbit vehicle providing a reusable orbital stage US Patent 4265416 - Orbiter/launch system U.S.
    [Show full text]
  • Omega-3 Fatty Acids Fact Sheet for Consumers
    Omega-3 Fatty Acids Fact Sheet for Consumers What are omega-3 fatty acids and what do they do? Omega-3 fatty acids are found in foods, such as fish and flaxseed, and in dietary supplements, such as fish oil. The three main omega-3 fatty acids are alpha-linolenic acid (ALA), eicosapentaenoic acid (EPA), and docosahexaenoic acid (DHA). ALA is found mainly in plant oils such as flaxseed, soybean, and canola oils. DHA and EPA are found in fish and other seafood. ALA is an essential fatty acid, meaning that your body can’t make it, so you must get it from the foods and beverages you consume. Your body can convert some ALA into EPA and then to DHA, but only in very small amounts. Therefore, getting EPA and DHA from foods (and dietary supplements if you take them) is the only practical way to increase levels of these omega-3 fatty acids in your body. Omega-3s are important components of the membranes that surround each cell in your body. DHA levels are especially high in retina (eye), brain, and sperm cells. Omega-3s also provide calories to give your body energy and have many functions in your heart, blood vessels, lungs, immune system, and endocrine system (the network of hormone-producing glands). How much omega-3s do I need? Omega-3s are found in foods Experts have not established recommended amounts for omega-3 fatty acids, except such as fatty fish and plant oils. for ALA. Average daily recommended amounts for ALA are listed below in grams (g).
    [Show full text]