Self-Drilling Screws

Fasteners 8_17.qxp_Layout 1 8/18/17 11:55 AM Page 2 SELF-DRILLING SCREWS

SELF-DRILLING SCREWS TECHNICAL INFORMATION

Self-drilling fasteners eliminate separate drilling and tap- Point Size Selection ping operations for faster, more economical installations. Maximum Combined Material Thickness By Point Type Tanner Bolt & Nut Corp. offers the most complete selection pre-drilled or ® FASTENERS of self-drilling fasteners made in the United States by Elco . top material pre-punched Self-drilling screws are designed to speed construction, top material to be drilled top material to be drilled TOTAL void or improve building integrity and ensure performance. THICKNESS insulation TOTAL TO BE THICKNESS • Starts Exactly Where It Is Placed – State of the art forging bottom material DRILLED bottom material bottom TO BE process technology and tooling produced to strict to be drilled to be drilled material DRILLED specifications provide a sharp, clean and consistent drill point. to be drilled • Broad Selection of Sizes and Applications – A variety of head styles and drive systems are available for specialized application and installations. Self-drilling screws are able Recommended Installation RPM Standard Sheet Metal Sizes to penetrate thin sheet metal through 1/2" thick steel. Diameter RPM Gauge Decimal #8 26 0.018 2500 Stalgard® Protective Coatings #10 24 0.024 #12 22 0.030 1800 Stalgard® high-performance protective 1/4" 20 0.038 coatings provide consistent, high corrosionn 5/16" 1200 18 0.048 resistance in construction applications. 16 0.060 Stalgard® durable, multi-layer, corrosion- 14 0.075 Nominal Screw Sizes resistant coatings are engineered to providede 12 0.106 optimal performance in demanding Thread Dia. Decimal construction applications. These environmentally-friendlymentally-friendly #6 .140 Threads Per Inch #7 .150 finishes are free of chromates and silicates and any Screw TPI process, like electroplating, that might induce hydrogen #8 .160 #9 .180 Diameter embrittlement, preventing structural failures. #8 18 #10 .190 #10 16 #11 .200 #11 16 #12 .210 #12 14 Stalgard Coating for Induction Heat-Treated Fasteners 1/4 .240 #14 14 • Proven, outstanding corrosion resistance for most #14 .250 construction applications, including metal and wood 1/4" 20 5/16" 18 • Salt spray resistance: 1000 hours per ASTM B117 Drilling and Tapping Capacity • Colors: silver, black, blue, white, yellow, red, gray & brown (Maximum Material Thickness)* .500” GB .500” .400” Stalgard GB (Galvanic Barrier) Coating .375” .312” • Standard on all Elco stainless steel fasteners .300” .210” .210” • Prevents a galvanic reaction between the stainless steel .175” and dissimilar application materials, which could lead to .200” .110” fastener and/or joint failure .100” .095”† .100” • Salt spray resistance: 1000 hours per ASTM B117 Thickness Material Combined • Available color: Silver .000” Diameter #10 #12 1/4” #8 #10 #12 #10 #12 1/4” 5/16” #12 1/4” #12 #12 1/4” SUB Point Type 1 2 3 4 4.5 5 † Lapped panels: 18 ga. to 18 ga. Stalgard SUB Ultimate Barrier Coating * NOTE: Some drill and tap capacities may vary due to special features on some fasteners. Refer to product • For more severely-corrosive environments performance specifications for any individual fastener to confirm performance and capabilities. • Salt spray 2,000 hours per ASTM B117 ICC Evaluation Report ESR-3294 • Available color: Silver The information and data contained on this page is current as of publication date. 2 800 456-2658 email: [email protected] www.shoptanner.com 714 Montauk Ave., Brooklyn, NY 11208 718 434-4500 Fax: 718 434-3215 60-01 55th Drive, Maspeth, NY 11378 718 786-2050 Fax: 718 228-7297 800 3rd Ave., Brooklyn, NY 11232 929 337-1821 Fasteners 8_17.qxp_Layout 1 8/18/17 11:55 AM Page 3 SELF-DRILLING SCREWS

TECHNICAL INFORMATION

Ultimate Strength Values† Shear Values† Carbon Steel, Case Hardened Product (Average Lbs. Ultimate) Shear

Size Tensile Shear Torque Lbs. Avg. Lbs. Min. Gauge 0.125 Min. Ult. In.-Lbs. Desc. Pt. 26 24 22 20 18 16 14 12 (1/8") 8-18 1,615 1,100 42 8-18 2 301 500 542 742 1,049 — — — — 8-32 1,890 1,228 48 10-16 1 403 585 673 883 1,330 — — — — 10-16 2,200 1,470 61 10-16 3 — 461 524 731 1,254 1,524 1,674 — — 10-24 2,362 1,535 65 12-14 1 437 718 763 1,030 1,548 — — — — 12-14 2,950 1,960 92 12-14 2 370 607 622 860 1,360 1,690 2,112 2,212 — 12-24 3,400 2,275 100 12-14 3 — — — 775 1,361 1,624 1,974 1,993 — 1/4-14 3,850 2,580 150 12-24 4 — — — — — 1,430 1,930 2,455 2,573 1/4-20 4,276 2,860 168 12-24 4.5 — — — — — 1,389 1,920 2,174 2,257 5/16-12 7,650 5,100 250 12-24 5 — — — — — 1,351 1,825 2,152 2,226 5/16-18 8,903 5,247 438 1/4-14 1 519 863 892 1,301 1,771 — — — — 11/32-12 8,550 5,700 400 1/4-14 3—— — 930 1,447 2,102 2,584 2,650 — 23/64-12 9,150 6,100 425 1/4-20 5 — — — — — 1,655 2,277 — 3,210

Pull-out Ultimate Average Fastener Pull-Out Values (Lbs)†

Material Thickness Point 26 24 22 20 18 16 14 12 Descrip. Type Ga. Ga. Ga. Ga. Ga. Ga. Ga. Ga. .120" 3/16" 1/4" 5/16" 3/8" 8-18 2 120 197 268 301 494 702 961 1,615 — — — — — 10-16 1 151 242 315 361 565 826 1,092 1,791 — — — — — 10-16 3 130 206 272 303 498 702 970 1,495 — — — — — 12-14 1 161 260 332 394 640 920 1,262 1,940 — — — — — 12-14 2 154 247 286 379 609 852 1,186 1,863 2,345 — — — — 12-14 3 142 214 296 349 580 767 1,078 1,553 1,956 — — — — 12-24 5 — — — 311 452 1,060 1,288 1,844 2,205 3,237 — — — 1/4-14 1 228 342 432 571 801 1,169 — — — — — — — 1/4-14 3 150 238 301 340 702 891 1,162 1,798 2,120 — — — — 1/4-20 3—— — 337 571 1,232 1,525 2,212 2,447 4,066 — — — 1/4-20 5 — — — — — — — — 3,431 4,801 5,261 — — 5/16-12 3 — — — 491 706 1,609 1,707 2,831 2,915 3,745 — — — (.260 dia.) 5/16-18 3 — — — 457 568 1,209 1,712 2,422 2,601 3,716 5,122 5,288 — (.290 dia.) 14-10 SS A 270 363 426 459 657 1,194 1,368 — — — — — — 1/4-14 SS B 216 344 383 411 571 686 983 1,698 2,242 2,693 3,695 3,746 3,484

NOTE: SS = Stainless Steel; CS = Carbon Steel The information and data contained on this page is current as of publication date. †NOTE: Test values shown are ultimate average values obtained under laboratory conditions and apply to fasteners manufactured by Elco Construction Products only. NOTE: All ELCO performance data shown in this catalog is based on tests performed under laboratory conditions at independent construction testing facilities. The appropriate safety factor should be applied and code requirements factored into specification and use of these fasteners. A safety factor of 4:1 or 25% of the ultimate average values shown is generally accepted as an appropriate working load. Final determination of the appropriate safety factor and use of these fasteners is the sole responsibility of the user, specifying Engineer, Architect or other responsible person designing the connection. Due to a wide variety of application conditions or intervening factors not under our control, we assume no liability for the use of the information provided in this document. For additional product information and technical assistance, please contact a Tanner Representative. 3 www.shoptanner.com email: [email protected] 800 456-2658 714 Montauk Ave., Brooklyn, NY 11208 718 434-4500 Fax: 718 434-3215 60-01 55th Drive, Maspeth, NY 11378 718 786-2050 Fax: 718 228-7297 800 3rd Ave., Brooklyn, NY 11232 929 337-1821 Fasteners 8_17.qxp_Layout 1 8/18/17 11:55 AM Page 4 SELF-DRILLING SCREWS

SELF-DRILLING SCREWS Standard Drill Screws Hex Washer Head Standard Self Drilling Screws Steel Made In USA Self-drilling fasteners eliminatete ITEM SIZE HEAD PT. BOX ITEM CTN. FINISH separate drilling and CODE DIA. SIZE QTY. CODE QTY.

FASTENERS 10N50UHWZ/USA #10 x 1/2" 5/16" #3 100 10N50UHWZ/USABULK 5000 Stalgard tapping operations for faster, 10N62UHWZ/USA #10 x 5/8" 5/16" #3 100 10N62UHWZ/USABULK 6000 Stalgard more economical installations.s. 10N75UHWZ1/USA #10 x 3/4" 5/16" #1 100 10N75UHWZ1/USABULK 5000 Stalgard 10N75UHWZ/USA #10 x 3/4" 5/16" #3 100 10N75UHWZ/USABULK 6000 Stalgard Specifications: 10N100UHWZ/USA #10 x 1" 5/16" #3 100 10N100UHWZ/USABULK 5000 Stalgard 10N150UHWZ/USA #10 x 1-1/2" 5/16" #3 100 10N150UHWZ/USABULK 3000 Stalgard • Diameters: #8 to 5/16" 10N200UHWZ/USA #10 x 2" 5/16" #3 100 10N200UHWZ/USABULK 2000 Stalgard • Lengths: 1/2" to 4" 12N75UHWZ1/USA #12 x 3/4" 5/16" #1 100 12N75UHWZ1/USABULK 5000 Stalgard ® ® 12N75UHWZ/USA #12 x 3/4" 5/16" #3 100 12N75UHWZ/USABULK 5000 Stalgard • Drill Points: Drilit forged or Drilltite dual-processed 12N100UHWZ/USA #12 x 1" 5/16" #3 100 12N100UHWZ/USABULK 4000 Stalgard • Drive Systems: Hex and phillips 12N125UHWZ/USA #12 x 1-1/4" 5/16" #3 100 12N125UHWZ/USABULK 3000 Stalgard 12N150UHWZ/USA #12 x 1-1/2" 5/16" #3 100 12N150UHWZ/USABULK 2500 Stalgard • Material: Carbon steel 12N200UHWZ/USA #12 x 2" 5/16" #3 100 12N200UHWZ/USABULK 2000 Stalgard • Finishes: Stalgard® coating or zinc 12N300UHWZ/USA #12 x 3" 5/16" #3 100 12N300UHWZ/USABULK 1000 Stalgard 12N400UHWZ/USA #12 x 4" 5/16" #3 100 12N400UHWZ/USABULK 500 Stalgard • Stalgard coating provides 1000 hours of salt spray 14N75UHWZ/USA #14 x 3/4" 3/8" #3 100 14N75UHWZ/USABULK 3500 Stalgard resistance (per ASTM B117) (see page 2) 14N87UHWZ/USA #14 x 7/8" 3/8" #1 100 14N87UHWZ/USABULK 4000 Stalgard 14N100UHWZ/USA #14 x 1" 3/8" #3 100 14N100UHWZ/USABULK 3000 Stalgard 14N125UHWZ/USA #14 x 1-1/4" 3/8" #3 100 14N125UHWZ/USABULK 2000 Stalgard 14N150UHWZ/USA #14 x 1-1/2" 3/8" #3 100 14N150UHWZ/USABULK 2000 Stalgard 14N200UHWZ/USA #14 x 2" 3/8" #3 100 14N200UHWZ/USABULK 1500 Stalgard 14N300UHWZ/USA #14 x 3" 3/8" #3 100 14N300UHWZ/USABULK 800 Stalgard 14N400UHWZ/USA #14 x 4" 3/8" #3 100 14N400UHWZ/USABULK 500 Stalgard

PanPan HeadH Phillips Self Drilling Screws Steel Made In USA Drill Screws w/Extended Drilling Capacity ITEM CODE SIZE PT. SIZE BOX QTY. ITEM CODE CTN. QTY. FINISH 8N100UPPZ/USA #8 x 1" #2 100 8N100UPPZ/USABULK 8000 Stalgard This line of heavy-duty drill screws is designed to speed installation in steel applications up to 1/2" thick. Specifications: • Diameters: #12 and 1/4" • Lengths: 7/8" to 8" Drilling Capacity • Head Style: Hex washer Hex Washerasher HeadHead SelfSelf DrillingDrilling ScrewsScrews SteelSteel - ExtendedExte Drilling Capacity Made In USA • Drive System: Hex ITEM CODE SIZE PT. SIZE BOX QTY. ITEM CODE CTN. QTY. FINISH • Material: Carbon steel ELC EDC801 12-24 x 7/8" #4 100 ELC EDC801/BULK 4500 Stalgard • Finish: Silver Stalgard® coating ELC EDC816 12-24 x 1-1/4" #4.5 100 ELC EDC816/BULK 3500 Stalgard ELC ECC720 12-24 x 1-1/4" #5 Drilltite 100 ELC ECC720/BULK 4000 Stalgard Features & Benefits: ELC ECC740 12-24 x 1-1/2" #5 Drilltite 100 ELC ECC740/BULK 2500 Stalgard • Points are either Drilit® forged or Drilltite® precision ELC ECC750 12-24 x 2" #5 Drilltite 100 ELC ECC750/BULK 2000 Stalgard milled points Hex Washer Head Self Drilling Screws Steel - Extended Drilling Capacity Globally Sourced • Can drill metal up to 0.500" thick ELC ECC940 1/4"-20 x 3" #5 Drilltite 100 ELC ECC940/BULK 1000 Stalgard ELC ECC950 1/4"-20 x 4" #5 Drilltite 100 ELC ECC950/BULK 1000 Stalgard ELC ECC960 1/4"-20 x 5" #5 Drilltite 100 ELC ECC960/BULK 500 Stalgard ELC ECC970 1/4"-20 x 6" #5 Drilltite 100 ELC ECC970/BULK 500 Stalgard ELC ECC980 1/4"-20 x 8" #5 Drilltite N/A* ELC ECC980/BULK 150 Stalgard * Items sold bulk carton only

4 800 456-2658 email: [email protected] www.shoptanner.com 714 Montauk Ave., Brooklyn, NY 11208 718 434-4500 Fax: 718 434-3215 60-01 55th Drive, Maspeth, NY 11378 718 786-2050 Fax: 718 228-7297 800 3rd Ave., Brooklyn, NY 11232 929 337-1821 Fasteners 8_17.qxp_Layout 1 8/18/17 11:55 AM Page 5 SELF-DRILLING SCREWS

SELF-DRILLING SCREWS Drilit® DrillScrewsw/BondedSealingWashers HexHex WasherWasher HeadHead SelfSelf DrillingDrilling ScrewsScrew with Bonded Washers Steel Made In USA This economical line of drill screws provides a weather- ITEM CODE SIZE HEAD DIA. WASHER OD PT. SIZE BOX QTY. ITEM CODE CTN. QTY. FINISH tight seal for protection againstnst thethe elements.elements. ELC EHL111 #10 x 3/4" 5/16" 1/2" #3 100 ELC EHL111/BULK 4000 Stalgard ELC EHL146 #10 x 1-1/2" 5/16" 1/2" #3 100 ELC EHL146/BULK 2000 Stalgard Specifications: ELC EHL165 #12 x 3/4" 5/16" 9/16" #3 100 ELC EHL165/BULK 3000 Stalgard • Diameters: #10 to 1/4" ELC EHL181 #12 x 1" 5/16" 9/16" #3 100 ELC EHL181/BULK 2500 Stalgard ELC EHL235 #12 x 1-1/4" 5/16" 9/16" #3 100 ELC EHL235/BULK 2000 Stalgard • Lengths: 3/4" to 4" ELC EHL276 #12 x 1-1/2" 5/16" 9/16" #3 100 ELC EHL276/BULK 2000 Stalgard • Head Styles: Hex washer ELC EHL280 #12 x 2" 5/16" 9/16" #3 100 ELC EHL280/BULK 1500 Stalgard ELC EHL295 #12 x 3" 5/16" 9/16" #3 100 ELC EHL295/BULK 1000 Stalgard • Drive System: Hex ELC EHL310 #12 x 4" 5/16" 9/16" #3 100 ELC EHL310/BULK 500 Stalgard • Point Types: #1 to #5 ELC EHL515 #14 x 3/4" 3/8" 5/8" #3 100 ELC EHL515/BULK 2500 Stalgard ELC EHK315 #14 x 7/8" 3/8" 9/16" #1 100 ELC EHK315/BULK 2500 Stalgard • Material: Carbon steel ELC EHL530 #14 x 1" 3/8" 5/8" #3 100 ELC EHL530/BULK 2000 Stalgard • Finish: Stalgard® coating ELC EHL556 #14 x 1-1/4" 3/8" 5/8" #3 100 ELC EHL556/BULK 1500 Stalgard ELC EHL577 #14 x 1-1/2" 3/8" 5/8" #3 100 ELC EHL577/BULK 1500 Stalgard Features & Benefits: ELC EHL585 #14 x 2" 3/8" 5/8" #3 100 ELC EHL585/BULK 1000 Stalgard ELC EHL600 #14 x 3" 3/8" 5/8" #3 100 ELC EHL600/BULK 800 Stalgard • EPDM washer material is UV and heat-resistant for ELC EHL610 #14 x 4" 3/8" 5/8" #3 100 ELC EHL610/BULK 500 Stalgard long-term protection against‑ leakage ELC EHL351 #12-24 x 7/8" 5/16" 9/16" #4 100 ELC EHL351/BULK 2500 Stalgard ELC EHL371 #12-24 x 1-1/4" 5/16" 9/16" #4.5 100 ELC EHL371/BULK 2500 Stalgard ELC ECW725 #12-24 x 1-1/4" 5/16" 9/16" #5 Drilltite 100 ELC ECW725/BULK 2500 Stalgard ELC ECW745 #12-24 x 1-1/2" 5/16" 9/16" #5 Drilltite 100 ELC ECW745/BULK 2000 Stalgard ELC ECW755 #12-24 x 2" 5/16" 9/16" #5 Drilltite 100 ELC ECW755/BULK 1000 Stalgard

Wood-To-Metal Reamers Wafer Head Phillips Wood-To-Metal Reamers with Wings Steel Made In USA These self-drilling fasteners eliminate separate drilling and ITEM CODE SIZE PT. SIZE DRIVE SIZE BOX QTY. ITEM CODE CTN. QTY. FINISH 10C143UWSZ/USA #10-24 x 1-7/16" #3 #2 100 10C143UWSZ/USABULK 4000 Gray Stalgard tapping operations for faster installationnstallation inin wood-to-metalwood-to-metal 12C175UWSZ/USA #12-24 x 1-3/4" #4 #3 100 12C175UWSZ/USABULK 2000 Gray Stalgard applications. Specifications: Flat Head Phillips Wood-To-Metal Reamers with Wings Steel Made In USA • Diameters: #10 to 1/4" 12C225UWSZ/USA #12-24 x 2-1/4" #4 #3 100 12C225UWSZ/USABULK 2000 Gray Stalgard 12C275UWSZ/USA #12-24 x 2-3/4" #4 #3 100 12C275UWSZ/USABULK 1500 Gray Stalgard • Lengths: 3/4" to 3-15/16" 25C300UWSZ/USA 1/4"-20 x 3" #4 #3 100 25C300UWSZ/USABULK 1000 Gray Stalgard • Head Styles: Flat and wafer 25C400UWSZ/USA 1/4"-20 x 4" #4 #3 100 25C400UWSZ/USABULK 1000 Gray Stalgard • Drive System: Phillips • Point Styles: Types 3 and 4 Wafer Head Phillips Wood-To-Metal Reamers Steel Made In USA • Material: Carbon steel 10C75UWSZ/USA #10-24 x 3/4" #3 #2 100 10C75UWSZ/USABULK 8000 Gray Stalgard • Finishes: Gray Stalgard® coating 10C100UWSZ/USA #10-24 x 1" #3 #2 100 10C100UWSZ/USABULK 6000 Gray Stalgard 10C125UWSZ/USA #10-24 x 1-1/4" #3 #2 100 10C125UWSZ/USABULK 5000 Gray Stalgard Features & Benefits: 10N150UWSZ/USA #10 x 1-1/2" #3 #2 100 10N150UWSZ/USABULK 3500 Gray Stalgard 10N1812UWSZ/USA #10 x 1-13/16" #2 #2 100 10N1812UWSZ/USABULK 2500 Gray Stalgard • Eliminates pre-drilling of wood • Broad selection of sizes Flat Head Phillips Wood-To-Metal Reamers Steel Made In USA • Can be used with steel up to 5/16" thick 12N3625UWSZ/USA #12 x 3-5/8" #2 #3 1 00 12N3625UWSZ/USABULK 1000 Gray Stalgard • Gray Stalgard coating provides 1000 hours of salt spray w/pilot resistance; developed for use with ACQ-treated lumber .500” with retention levels no higher than .25 PCF Drilling and Tapping Capacity For Wood to Metal Screws .400” (Maximum Material Thickness)* .312” .300” * NOTE: Some drill and tap capacities may vary due to special .250” features on some fasteners. Refer to product performance .200” .187” specifications for any individual fastener to confirm .150” .110” performance and capabilities. .100” Combined Material Thickness Material Combined NOTE: Due to a wide variety of application conditions or intervening factors .000” not under our control, we assume no liability for the use of the information provided in this document. For additional product information and technical Diameter #10 #12 #10 #12 1/4” #11 #12 1/4” assistance, please contact a Tanner Representative. Point Type 2 3 4 4 5** The information and data contained on this page is current as of publication date. ** Bi-Flex fasteners only. See p8 5 www.shoptanner.com email: [email protected] 800 456-2658 714 Montauk Ave., Brooklyn, NY 11208 718 434-4500 Fax: 718 434-3215 60-01 55th Drive, Maspeth, NY 11378 718 786-2050 Fax: 718 228-7297 800 3rd Ave., Brooklyn, NY 11232 929 337-1821 Fasteners 8_17.qxp_Layout 1 8/18/17 11:55 AM Page 6 SELF-DRILLING SCREWS

SELF-DRILLING SCREWS TECHNICAL INFORMATION

® Dril-Flex Structural Drill Screws Pull-out Tests – Steel (Lbs.) Dual heat treated drill screws Screw Point Drill Steel Size Type Cap. 18 16 14 12 1/8 3/16 1/4 5/16 FASTENERS provide the strength, ductility and resistance to embrittlementt 10-16 3 .150 396 501 634 1595 1693 required for critical applications.. 12-14 3 .187 396 527 710 1678 2061 2898 1/4-14 3 .187 398 530 686 1950 2264 3919 Specifications: 1/4-20 4 .312 516 649 1912 2296 2928 3561 4488 • Diameters: #10 to 5/16" 5/16-18 3 .210 2333 2856 • Lengths: 3/4" to 4" 5/16-24 4 .312 2148 2573 4226 5424 6622 • Head/Drive Styles: Hex washerr 3/8-16 1 .075 1843 and phillips pan, wafer and undercut flat • Point Types: #3, #4 and #5 Pull-out Tests – Aluminum(Lbs.) Shear Tests – Aluminum(Lbs.) • Material: Alloy steel Screw Point Drill Aluminum 6063-T5 Screw Point Drill Aluminum 6063-T5 • Heat Treat: Grade 5 Size Type Cap. 1/8” 1/4” 3/8” Size Type Cap. 1/8” -1/8” 1/8” -1/4” • Finish: Silver Stalgard® or Stalgard® SUB coating 10-16 3 .150 10-16 3 .150 1466 Features & Benefits: 12-14 3 .187 939 2286 12-14 3 .187 1797 2483 • Stalgard® SUB coating (Hex washer product only) provides 1/4-14 3 .210 1003 2424 1/4-14 3 .210 1996 2883 2000 hours of salt spray resistance (per ASTM B117) 1/4-20 4 .312 897 2075 3683 1/4-20 4 .312 2006 2926 • High-hardness points and lead threads for drilling and 5/16-18 3 .210 1120 2967 4796 5/16-18 3 .210 2132 3009 tapping with lower-hardness in load-bearing threads for 5/16-24 4 .312 1043 2566 5/16-24 4 .312 1849 2926 ductility • Virtually immune to delayed embrittlement failures Shear Tests – Steel (Lbs.) Steel Comparison to Stainless Steel Screws Screw Point Drill 18-18 18-14 16.-16 14-14 1/8"- 3/16"- 1/4"- Size Type Cap. 3/16" 1/4" 12 ga. 300 series stainless steel fasteners provide high resistance 10-16 3 .150 1362 1733 1462 to hydrogen embrittlement failures. However, stainless 12-14 3 .187 1315 2118 1655 1816 steel is galvanically incompatible with aluminum or 1/4-14 3 .210 1395 2313 1681 2417 2600 steel panels. In this case, stainless steel fasteners trigger a 1/4-20 4 .312 1350 2086 1582 2450 2814 2810 2706 sacrificial action, which can lead to degradation of the 5/16-18 3 .210 1509 2300 1811 3255 panel and loosening of the fastener. 5/16-24 4 .312 5486 5283 4761 A dual-hardening process allows Dril-Flex® fasteners to 3/8-16 1 .075 6750 provide high strength and resistance to hydrogen NOTE: All test setups and dimensions were as limited and outlined in AISI Test Method for Mechanically embrittlement failures. Their Stalgard® finish provides Fastened Cold-Formed Steel Connections (CF92-1) document. Performance values listed are ultimate values obtained under laboratory conditions. corrosion resistance several Galvanic Series times greater than other Anodic End Metal/Alloy EMF(v) Approvals commonly-used finishes. Magnesium...... -1.60 If an environment is Zinc...... -1.10 • ICC-ES Report No. ESR-3332 Alum (5000, 6000, 7000)...... -.75 • COLA (City of Los Angeles) Research Report #25095 corrosive enough to Iron, Low Alloy Steels...... -.70 significantly affect the Alum (2000)...... -.60 The information and data contained on this page is current as of publication date. Stalgard finish, the Lead...... -.55 potential for significant 18% Chromium Steel...... -.35 Naval Brass...... -.30 Identification degradation of the Brass, Bronze...... -.25 (hex washer head shown) aluminum/ stainless steel Austenitic Stainless (300 Series) -.20 Elco® logoo raisedra circle assembly would also exist. Nickel...... -.15 Silver...... 0 Gold...... +15 Cathodic End 6 800 456-2658 email: [email protected] www.shoptanner.com 714 Montauk Ave., Brooklyn, NY 11208 718 434-4500 Fax: 718 434-3215 60-01 55th Drive, Maspeth, NY 11378 718 786-2050 Fax: 718 228-7297 800 3rd Ave., Brooklyn, NY 11232 929 337-1821 Fasteners 8_17.qxp_Layout 1 8/18/17 11:55 AM Page 7 SELF-DRILLING SCREWS

SELF-DRILLING SCREWS Embrittlement Tests Embrittlement testing of Dril-Flex screws was performed Hex Washer Head Dril-Flex Structural Drill Screws Heat Treated Made In USA in accordance to ASTM F1624-06. Fastener lots were ITEM SIZE PT. HEAD LOAD BEARING BOX ITEM CARTON FINISH CODE SIZE SIZE AREA (INCHES) QTY. CODE QTY. tested to determine their Threshold Stress Limits for both ELC EAF430 #10 x 3/4" #3 5/16" .380" 100 ELC EAF430/BULK 6000 Stalgard SUB Internal Hydrogen Embrittlement and Environmental ELC EAF460 #10 x 1-1/2" #3 5/16" 1.25" 100 ELC EAF460/BULK 2500 Stalgard SUB ELC EAF470 #10 x 2" #3 5/16" 1.50" 100 ELC EAF470/BULK 2000 Stalgard SUB Hydrogen Embrittlement. Threshold Stress Limit is the ELC EAF480 #10 x 2-1/2" #3 5/16" 2.25" 100 ELC EAF480/BULK 1500 Stalgard SUB stress level below which no time-dependent cracking will ELC EAF621* #12 x 7/8" #3 5/16" .380" 100 ELC EAF621/BULK* 5000 Stalgard SUB ELC EAF641 #12 x 1" #3 5/16" .500" 100 ELC EAF641/BULK 4000 Stalgard SUB occur. Above this level, subcritical cracking that leads ELC EAF681 #12 x 1-1/2" #3 5/16" 1.00" 100 ELC EAF681/BULK 2500 Stalgard SUB to time delayed fracture or embrittlement may occur if ELC EAF690 #12 x 2" #3 5/16" 1.50" 100 ELC EAF690/BULK 2000 Stalgard SUB the fastener is exposed to a hydrogen environment. ELC EAF715 #12 x 3" #3 5/16" 2.35" 100 ELC EAF715/BULK 1000 Stalgard SUB ‑ ELC EAF816 #14 x 1" #3 3/8" .450" 100 ELC EAF816/BULK 3000 Stalgard SUB ELC EAF841 #14 x 1-1/2" #3 3/8" .950" 100 ELC EAF841/BULK 2000 Stalgard SUB Embrittlement Test Results ELC EAF876 1/4"-20 x 1-1/2" #4 3/8" .830" 100 ELC EAF876/BULK 2000 Stalgard SUB ELC EAF846 #14 x 2" #3 3/8" 1.45" 100 ELC EAF846/BULK 1500 Stalgard SUB • Dril-Flex fasteners have a hardness range of HRC 28 – ELC EAF886 1/4"-20 x 2" #4 3/8" 1.33" 100 ELC EAF886/BULK 1500 Stalgard SUB ELC EAF865 1/4"-20 x 1-1/8" #4 3/8" .500" 100 ELC EAF865/BULK 2500 Stalgard SUB 34, ELC EAF888 1/4"-20 x 1-3/4" #5 3/8" .800" 100 ELC EAF888/BULK 1000 Stalgard SUB which is roughly equivalent to a SAE Grade 5 fastener ELC EAF890 1/4"-20 x 2-1/2" #4 3/8" 1.83" 100 ELC EAF890/BULK 1000 Stalgard SUB ELC EAF900 1/4"-20 x 3-3/8" #4 3/8" .270" 100 ELC EAF900/BULK 500 Stalgard SUB (HRC 25 – 34). ELC EAF910 1/4"-20 x 4" #4 3/8" 3.50" 100 ELC EAF910/BULK 500 Stalgard SUB • Dril-Flex fasteners showed resistance to the effect of ELC EAF940 5/16"-18 x 1-1/2" #3 3/8" .800" 100 ELC EAF940/BULK 1000 Stalgard SUB ELC EAF960 5/16"-24 x 1-1/2" #4 3/8" .800" 100 ELC EAF960/BULK 1000 Stalgard SUB hydrogen-assisted cracking when loaded to 75% of their ELC EAF970 5/16"-24 x 2" #4 3/8" 1.25" 100 ELC EAF970/BULK 1000 Stalgard SUB tensile strength. This is within accepted industry guide ELC EAF310 3/8"-16 x 1-3/4" #1 3/8" .850" 100 ELC EAF310/BULK 500 Stalgard SUB lines for in service loading conditions. • Dril-Flex fasteners‑ showed no degradation or failures in * For aluminum only

Hex Washer Head Undercut Head Pan Head Wafer Head Distinctive IMPORTANT: circled To ensure optimum performance, only the load bearing area should be engaged in the material to be fastened Elco® logo headmarking Lower-hardness Phillips Head Dril-Flex Structural Drill Screws Heat Treated - Made In USA (HRC 28-34) ITEM SIZE PT. HEAD DRIVE LOAD BEARING BOX ITEM CARTON FINISH CODE SIZE STYLE SIZE AREA (INCHES) QTY. CODE QTY. load-bearing section provides ELC EDX445 #10 x 3/4" #2 Pan Head #2 .380" 100 ELC EDX445/BULK 6000 Stalgard Phillips ® ducility Stalgard ELC EBL530 #10-24 x 1-1/4" #3 Wafer Head #2 .750" 100 ELC EBL530/BULK 5000 Stalgard finish Phillips provides ELC EBL215 #12 x 1" #3 Flat Head #3 .500" 100 ELC EBL215/BULK 4000 Stalgard corrosion Higher-hardness U/C Phillips resistance (HRC 28-52 min.) ELC EBL223 #12 x 1-1/2" #3 Flat Head #3 1.00" 100 ELC EBL223/BULK 2500 Stalgard drill point and lead U/C Phillips threads for reliable ELC EBL330 1/4"-20 x 3" #4 Flat Head #3 2.50" 100 ELC EBL330/BULK 500 Stalgard drilling U/C Phillips ELC EBL340 1/4"-20 x 4" #4 Flat Head #3 3.50" 100 ELC EBL340/BULK 500 Stalgard U/C Phillips

NOTE: All performance data shown is based on tests performed under laboratory conditions at independent construction testing facilities. The appropriate safety factor should be applied and code requirements factored into specification and use of these fasteners. A safety factor of 4:1 or 25% of the ultimate average values shown is generally accepted as an appropriate working load. Final determination of the appropriate safety factor and use of these fasteners is the sole responsibility of the user, specifying Engineer, Architect or other responsible person designing the connection. Due to a wide variety of application conditions or intervening factors not under our control, we assume no liability for the use of the information provided in this document. For additional product information and technical assistance, please contact a Tanner Representative. 7 www.shoptanner.com email: [email protected] 800 456-2658 714 Montauk Ave., Brooklyn, NY 11208 718 434-4500 Fax: 718 434-3215 60-01 55th Drive, Maspeth, NY 11378 718 786-2050 Fax: 718 228-7297 800 3rd Ave., Brooklyn, NY 11232 929 337-1821 Fasteners 8_17.qxp_Layout 1 8/18/17 11:55 AM Page 8 SELF-DRILLING SCREWS

™ BI-METAL SELF-DRILLING SCREWS PERFORMANCE DATA Bi-Flex™ 300 Series Stainless Steel Pull-Out Values (Lbs)†

Bi-metal technology Pull-Out (Lbs.) provides outstanding Drill Steel RB60-75 Aluminum6063- FASTENERS corrosion resistance and T5 long service life. Bi-Flex™ Screw Capacity 50-66KSI 22KSI fasteners provide the 8-18 #2 0.100 499 558 875 1425 corrosion resistance of 30000 10-16 #2 0.110 595 633 943 1433 − − − 994 − series stainless steel and 10-16 #3 0.187 − 616 684 1242 1605 1527 − 961 − the efficiency of drill screws.ws. 12-14 #2 0.110 528 750 892 1536 − – − 1132 − Specifications: 12-14 #3 0.230 417 679 802 1371 2028 2499 − 974 − 12-24 #5 0.500 − − − − − 2110 2781 538 1995 • Diameters: #10 to 1/4" 1/4-14 #2 0.110 619 885 1082 1830 2943 – − 1310 − • Lengths: 3/4" to 8" 1/4-20 #3 0.230 − 680 780 1442 2623 3684 4069 1037 – • Drive Systems: Hex and phillips 1/4-20 #5 0.500 − − − − − − 2622 − 1724 • Material: Hardened steel tapping threads and point fused onto an 18-8 stainless steel shank and head • Finish: Stalgard® GB (Galvanic Barrier) coating Ultimate Strengths** Features & Benefits: • High strength, ductility and reliability Size Tensile Shear • Virtually immune to delayed embrittlement failures (Lbs) Average Lbs Ultimate • Greater galvanic compatibility in dissimilar metal 10-16 1847 1282 applications involving aluminum 12-14 2628 1950 12-24 2734 2284 • High in-place value over the life of application 1/4-14 3459 2676 1/4-20 4124 2860 ** Values are for 300 series stainless fastener threaded shank

Susceptibility To Embrittlement Failures 1 2 400 Series In head to head testing, Bi-Flex™ 300 fasteners 3 Failure SS Modified and three different types of 400 series martensitic 4 Failure 5 Failure stainless, self-drilling screws were installed in identical test coupons of unplated steel and aluminum. They 410 SS 1 Failure 2 Case Hardened Failure were then subjected to a mildly corrosive environment 3 Failure of 5% neutral salt spray testing per ASTM B117. At with Aluminum 4 Failure the start of the test all samples were torqued (preloaded) Top Coat 5 Failure to 75 in lbs. Every 24 hours the samples were inspected for 1 Failure torque value and retorqued to 75 in lbs. The parts were 410 SS Super 2 Failure evaluated by scanning electron microscope (S.E.M.) to Passivated 3 Failure Plain Finish 4 Failure determine the type of fracture that had occurred. The 5 Failure three 400 series fasteners showed an intergranular type failure, indicative of fracturing that occurs from hydrogen 1 2 BI-FLEX™ 300 assisted stress corrosion cracking. No failures or loss of 3 NO FAIURES/NO LOSS OF PRELOAD preload Fasteners 4 5 0 24 48 72 96 120 144 168 192 216 240 All fasteners were placed through a clear hole in 6061 T6 aluminum with a hours thickness of 0.125" and drilled into an unplated steel strip measuring a thickness of 0.125". A strip of 0.060" aluminum was placed in between the Failure = Catastrophic Failure 0.125" aluminum and steel strip on one side, to simulate a fastener placed under load. The information and data contained on this page is current as of publication date. 8 800 456-2658 email: [email protected] www.shoptanner.com 714 Montauk Ave., Brooklyn, NY 11208 718 434-4500 Fax: 718 434-3215 60-01 55th Drive, Maspeth, NY 11378 718 786-2050 Fax: 718 228-7297 800 3rd Ave., Brooklyn, NY 11232 929 337-1821 Fasteners 8_17.qxp_Layout 1 8/18/17 11:55 AM Page 9 SELF-DRILLING SCREWS

SELF-DRILLING SCREWS ™ Bi-Flex™ 300 (18.8) Series Stainless Steel Owners, architects and design engineers Hex Washer Head Bi-Flex 300 Series Stainless Steel Bi-Metal Self-Drilling Screws expect longer life cycles from buildings. ITEM SIZE -(L) PT. HEAD LOAD BEARING BOX ITEM CARTON FINISH Extended warranties and use of more CODE SIZE SIZE AREA (INC.)-(B) QTY. CODE QTY. ELC EAJ100 #8 x 3/4" #2 5/16" 0.32" 100 ELC EAJ100/BULK 5000 Stalgard GB sustainable materials add up to greater ELC EAJ102 #8 x 1" #2 5/16" 0.50" 100 ELC EAJ102/BULK 5000 Stalgard GB expectations for performance –from ELC EAJ110 #10 x 3/4" #2 5/16" 0.32" 100 ELC EAJ110/BULK 5000 Stalgard GB structural integrity to the purely aesthetic – ELC EAJ120 #10 x 1" #2 5/16" 0.50" 100 ELC EAJ120/BULK 5000 Stalgard GB ELC EAJ140 #10 x 1-1/2" #2 5/16" 2.20" 100 ELC EAJ140/BULK 2500 Stalgard GB of all building components. ELC EAJ185 #12 x 1" #2 5/16" 0.50" 100 ELC EAJ185/BULK 3000 Stalgard GB The Solution: ELC EAJ215 #12 x 1-1/2" #2 5/16" 1.00" 100 ELC EAJ215/BULK 2500 Stalgard GB ELC EAJ190 #12 x 1" #3 5/16" 0.50" 100 ELC EAJ190/BULK 4000 Stalgard GB Bi-Flex fasteners bring the corrosion resistance of 300 ELC EAJ220 #12 x 1-1/2" #3 5/16" 1.00" 100 ELC EAJ220/BULK 2500 Stalgard GB series stainless steel and the efficiency of self-drilling ELC EAJ260 #12 x 2-1/2" #3 5/16" 2.00" 100 ELC EAJ260/BULK 1000 Stalgard GB fasteners together in one unique fastener. ELC EAJ240 #12 x 2" #2 5/16" 1.50" 100 ELC EAJ240/BULK 1500 Stalgard GB ELC EAJ320 #12-24 x 1-1/2" #5 5/16" 0.60" 100 ELC EAJ320/BULK 2500 Stalgard GB • Unmatched, multi-level corrosion resistance ELC EAJ340 #12-24 x 2" #5 5/16" 1.10" 100 ELC EAJ340/BULK 2000 Stalgard GB • Quick and easy installation into 300 series ELC EAJ415 #14 x 1" #2 3/8" 0.50" 100 ELC EAJ415/BULK 2500 Stalgard GB structural steel and aluminum stainless steel ELC EAJ430 #14 x 1-1/2" #2 3/8" 1.00" 100 ELC EAJ430/BULK 1000 Stalgard GB head and ELC EAJ445 #14 x 2" #2 3/8" 1.50" 100 ELC EAJ445/BULK 1500 Stalgard GB up to 1/2" thick shank ELC EAJ540 1/4"-20 x 1" #2 3/8" 0.50" 100 ELC EAJ540/BULK 2500 Stalgard GB • Perfect choice for exposed/wet Fused and ELC EAJ580 1/4"-20 x 1-1/2" #2 3/8" 1.00" 100 ELC EAJ580/BULK 1000 Stalgard GB areas/aggressive environmentshardened steel ELC EAJ600 1/4"-20 x 1-1/2" #5 3/8" 0.60" 100 ELC EAJ600/BULK 1000 Stalgard GB • High performance for your tapping threads ELC EAJ610 1/4"-20 x 2" #3 3/8" 1.50" 100 ELC EAJ610/BULK 1500 Stalgard GB and drill point ELC EAJ615 1/4"-20 x 2" #5 3/8" 1.10" 100 ELC EAJ615/BULK 1500 Stalgard GB mostcritical applications ELC EAJ640 1/4"-20 x 2-1/2" #3 3/8" 2.00" 100 ELC EAJ640/BULK 1000 Stalgard GB ELC EAJ650 1/4"-20 x 3" #3 3/8" 2.50" 100 ELC EAJ650/BULK 500 Stalgard GB Applications ELC EAJ630 1/4"-20 x 3" #5 3/8" 2.10" 100 ELC EAJ630/BULK 500 Stalgard GB ELC EAJ660 1/4"-20 x 4" #3 3/8" 3.50" 100 ELC EAJ660/BULK 500 Stalgard GB • Exposed/wet areas/coastal/aggressive environments ELC EAJ670 1/4"-20 x 4" #5 3/8" 3.10" 100 ELC EAJ670/BULK 500 Stalgard GB • Curtain wall/window wall systems/rain-screen systems ELC EAJ675 1/4"-20 x 5" #5 3/8" 4.10" N/A* ELC EAJ675/BULK 250 Stalgard GB • Windows/doors/aluminum enclosures/skylights ELC EAJ680 1/4"-20 x 6" #5 3/8" 5.10" N/A* ELC EAJ680/BULK 250 Stalgard GB ELC EAJ690C 1/4"-20 x 8" #5 3/8" 7.10" N/A* ELC EAJ690C/BULK 150 Stalgard GB • Composite panel systems to aluminum or steel * Items sold bulk carton only • ACQ-treated wood to steel • Brick veneer anchoring 300 series stainless Pan Head Bi-Flex 300 Series Stainless Steel Bi-Metal Self-Drilling Screws steel head and shank • Solar panel systems ITEM SIZE PT. DRIVE LOAD BEARING BOX ITEM CARTON FINISH CODE SIZE SIZE AREA (INCHES) QTY. CODE QTY. Silver-colored ELC EAX100 #8 x 3/4" #2 #2 Phillips 0.320" 100 ELC EAX100/BULK 5000 Stalgard GB Stalgard® GB ELC EAX102 #8 x 1" #2 #2 Phillips 0.500" 100 ELC EAX102/BULK 5000 Stalgard GB coating ELC EAX110 #10 x 3/4" #2 #2 Phillips 0.320" 100 ELC EAX110/BULK 5000 Stalgard GB ELC EAX120 #10 x 1" #2 #2 Phillips 0.500" 100 ELC EAX120/BULK 5000 Stalgard GB Fused and hardened steel drill point Pancake Head Bi-Flex 300 Series Stainless Steel Bi-Metal Self-Drilling Screws Identification ELC EBN300 #10 x 1" #2 #2 Phillips 0.500" 100 ELC EBN300/BULK 4000 Stalgard GB ELC EBN320 #12 x 1" #3 #2 Phillips 0.500" 100 ELC EBN320/BULK 4000 Stalgard GB The head marking consists of the number “3” above the Elco® logo as shown below Flat Head Reamers w/ Wings Bi-Flex 300 Series Stainless Steel Bi-Metal Self-Drilling Screws ELC EBN140 #10 x 1-1/2" #3 #2 Phillips 0.800" 100 ELC EBN140/BULK 3500 Stalgard GB ELC EBN345 #12-24 x 2-13/16" #5 #3 Phillips 1.710" 100 ELC EBN345/BULK 1000 Stalgard GB ELC EBN645 1/4"-20 x 2-13/16" #5 #3 Phillips 1.710" 100 ELC EBN645/BULK 1000 Stalgard GB Flat, pan and pancake head HexH washerh headh d The load-bearing length is the length of 300 series stainless under the Flat Head Undercut Bi-Flex 300 Series Stainless Steel Bi-Metal Self-Drilling Screws hex, pan or pancake head or including the flat head. Hardened steel ELC EBN200 #12 x 1" #2 #3 Phillips 0.500" 100 ELC EBN200/BULK 4000 Stalgard GB length (lead threads and point) should be through the connection and ELC EBN240 #12 x 1-1/2" #2 #3 Phillips 1.00" 100 ELC EBN240/BULK 2500 Stalgard GB not in the load bearing section of the connection. ELC EBN630 1/4"-20 x 3" #2 #3 Phillips 2.500" 100 ELC EBN630/BULK 500 Stalgard GB ELC EBN640 1/4"-20 x 4" #2 #3 Phillips 3.500" 100 ELC EBN640/BULK 500 Stalgard GB The information and data contained on this page is current as of publication date. 9 www.shoptanner.com email: [email protected] 800 456-2658 714 Montauk Ave., Brooklyn, NY 11208 718 434-4500 Fax: 718 434-3215 60-01 55th Drive, Maspeth, NY 11378 718 786-2050 Fax: 718 228-7297 800 3rd Ave., Brooklyn, NY 11232 929 337-1821 Fasteners 8_17.qxp_Layout 1 8/18/17 11:55 AM Page 10 SELF-DRILLING SCREWS

SELF-DRILLING SCREWS TECHNICAL INFORMATION Alumi-Flex™ 302 (18-8) Stainless Steel Tensile Strength (Mechanical Characteristics) Stainless steel drill screws provide strength and corrosion Peak Load PSI Identification resistance in a variety of aluminumminum applications.applications. (Lbs. of Force) Yield Ultimate Yield Ultimate The head marking consists of the number FASTENERS Specifications: Size Pt. (Fy) (Fu) (Fy) (Fu) “3”3 bbelowelow tthehe EElco®lco llogoogo aass sshownhown • Diameters: #10 to 1/4" #10-16 3 1,766 1,778 93,937 94,580 • Lengths: 1/2" to 1-1/2" #12-14 3 2,300 2,320 93,268 94,061 3 3 • Head Style: Hex washer 1/4-14 3 3,180 3,197 97,888 98,433 • Drive System: Hex 1/4-20 4 3,225 3,266 101,438 102,709 FlatFlat headhead HexHex washerwasher headhead • Point Types: #3 and #4 • Material: 302 stainless steelel Shear (Lbs. of Force) Lapped 6061 T6 Aluminum Strips • Finish: Stalgard® GB (Galvanicanic Barrier)Barrier) coatingcoating Ult. Shear Strength Size Pt. .060" .090" .125" .187" .250" .312" of Fastener Features & Benefits: #10-16 3 834 1,275 1,306 – – – 1,152 • Provides a very high level of corrosion resistance #12-14 3 668 1,611 1,692 1,744 – – 1,545 • Coating allows greater galvanic compatibility in 1/4-14 3 769 1,963 2,255 2,275 – – 2,122 dissimilar metal applications involving aluminum 1/4-20 4 – 1,794 2,163 2,176 2,244 2,244 2,139 • Head marked with a “3” for easy identification Hex Washer Head Alumi-Flex 302 (18.8) Stainless Steel Self-Drilling Screws Made In USA ITEM CODE SIZE PT. SIZE BOX QTY. ITEM CODE CTN. QTY. FINISH Pull-Out (Lbs. of Force) ELC EAH430 #10 x 1/2" #3 100 ELC EAH430/BULK 8000 Stalgard GB ELC EAH445 #10 x 3/4" #3 100 ELC EAH445/BULK 6000 Stalgard GB 6061 T6 Aluminum ELC EAH460 #10 x 1" #3 100 ELC EAH460/BULK 5000 Stalgard GB Size Pt. .060" .090" .125" .187" .250" .312" ELC EAH630 #12 x 3/4" #3 100 ELC EAH630/BULK 5000 Stalgard GB #10-16 3 341 849 1,460 – – – ELC EAH650 #12 x 1" #3 100 ELC EAH650/BULK 5000 Stalgard GB ELC EAH680 #12 x 1-1/2" #3 100 ELC EAH680/BULK 3000 Stalgard GB *2 #12-14 3 347 859 1,533 236 0 – – ELC EAH800 #14 x 3/4" #3 100 ELC EAH800/BULK 3500 Stalgard GB 1/4-14 3 386 955 1,657 3205*1 3227*2 – ELC EAH820 #14 x 1" #3 100 ELC EAH820/BULK 3000 Stalgard GB 1/4-20 – – 1,208 1,846 3291*2 3289*2 3299*2 ELC EAH835 #14 x 1-1/2" #3 100 ELC EAH835/BULK 2000 Stalgard GB ELC EAH870 1/4"-20 x 1" #4 100 ELC EAH870/BULK 2000 Stalgard Mode of Failure Key GB Unless noted, the MOF was Material Failure in all test samples *1: 3 Test samples had material failure and seven samples had fastener failure FlatHeadPhillipsUndercutHead Alumi-Flex 302 (18.8)Stainless Steel Self-Drilling Screws *2: Fastener failure in all test samples ELC EBM160 #10 x 3/4" #3 100 ELC EBM160/BULK 10000 Stalgard GB ELC EBM260 #14 x 3/4" #3 100 ELC EBM260/BULK 4500 Stalgard GB

Architectural Roof Clip Fasteners TECHNICAL INFORMATION The efficiency of self-drilling fasteners and the aethetics of Pull-Out Values (Lbs an inobtrusive head are ideal for attaching metal roof clips Diameter Point Type 26 ga. 24 ga. 22 ga. 20 ga. 18 ga. 14 ga. 12 ga. #10 #3 139 206 272 303 498 970 1495 to metal and wood. #12 #3 142 214 296 349 580 1078 1553 Specifications: • Diameters: #10 to #12" Shear Values (Lbs • Lengths: 1" to 2" Diameter Point Type 20 ga. 18 ga. 16 ga. 14 ga. • Head Styles: Pancake #10 #3 301 503 710 969 • Drive Systems: Phillips #12 #3 775 1361 1624 1974 • Material: Carbon steel • Finishes: Silver Stalgard® coating Pancake Head Phillips Architectural Clip Screws Steel Made In USA ITEM CODE SIZE PT. SIZE BOX QTY. ITEM CODE CTN. QTY. FINISH Features & Benefits: ELC EDO450-100 #10 x 1" #3 100 ELC EDO450/BULK 4000 Silver Stalgard • Eliminates separate drilling and tapping operations ELC EDO460-100 #10 x 1-1/2" #3 100 ELC EDO460/BULK 3000 Silver Stalgard ELC EDO470-100 #10 x 2" #3 100 ELC EDO470/BULK 2000 Silver Stalgard • Pancake head improves prevents panel dimpling ELC EDO735-100 #12 x 1" #3 100 ELC EDO735/BULK 4000 Silver Stalgard The information and data contained on this page is current as of publication date. 10 800 456-2658 email: [email protected] www.shoptanner.com 714 Montauk Ave., Brooklyn, NY 11208 718 434-4500 Fax: 718 434-3215 60-01 55th Drive, Maspeth, NY 11378 718 786-2050 Fax: 718 228-7297 800 3rd Ave., Brooklyn, NY 11232 929 337-1821 Fasteners 8_17.qxp_Layout 1 8/18/17 11:55 AM Page 11 SELF-DRILLING SCREWS

SELF-DRILLING X METAL SCREWS Fastening to Metal Common Applications: • Steel decking to structural steel Self-Drilling X Metal Screws Bulk Cartons • Steel stitching (“side-lap” stitching) ITEM CODE SHANK LENGTH THREADS POINT DRILL-THROUGH FINISH CARTON APPLICATION(S) SIZE IN IN IN PER INCH SIZE THICKNESS QTY. • Cold-formed steel framing SIM XQ1B1016-4K* 10 1 16 3 .110 – .175 Quik Guard 4000 Steel stitching, cold Features & Benefits: SIM XQ1B1214-3.5K* 12 1 14 3 .110 – .210 Quik Guard 3500 formed steel framing SIM XQ78B1224-3K* 12 7/8 24 4 .110 – .250 Quik Guard 3000 } • 5/16" hex head SIM XQ114B1224-2.5K* 12 1-1/4 24 5 .125 – .500 Quik Guard 2500 Steel decking to structural steel, • Drill point SIM XQ112B1224-2K* 12 1-1/2 24 5 .125 – .500 Quik Guard 2000 } cold formed steel framing • Hex washer head SIMSIM XXU34B1016-5KU34B1016-5K 1 100 ¾ 1 166 1 . .030030 – ..110110 C Clearlear ZZincinc 5 5000000 SSIMIM XX34B1016-5K34B1016-5K 1 100 ¾ 1 166 3 . .110110 – ..175175 C Clearlear ZZincinc 5 5000000 S Steelteel sstitching,titching, ccoldold Codes/Standards: SSIMIM XX1B1016-4K1B1016-4K 1 100 1 1 166 3 . .110110 – ..175175 C Clearlear ZZincinc 4 4000000 f formedormed ssteelteel fframingraming ICC-ES ESR-3006 (excludes XU34B1016-5K); IAPMO UES SSIMIM XX1B1214-3.5K1B1214-3.5K 1 122 1 1 144 3 . .110110 – ..210210 C Clearlear ZZincinc 3 3500500 ER-326; City of L.A. RR25670 (1" length sizes only) & SSIMIM XX114B1224-2.5K114B1224-2.5K 1 122 1 1-1/4-1/4 2 244 5 . .125125 – ..500500 C Clearlear ZZincinc 2 2500500 }S Steelteel ddeckingecking ttoo sstructuraltructural ssteel,teel, ccoldold fformedormed ssteelteel fframingraming RR25917 & RR26009; ASTM C1513 compliant; Factory } * These coated fasteners possess a level of corrosion resistance that makes them suitable for use in some exterior and corrosive Mutual (FM) Approval 3045651; SDI DDM03-Appendix VII environments and with some preservative-treated woods. For applications in higher-exposure applications, consider Type-300 series stainless-steel fasteners for superior corrosion resistance . WARNING: Industry studies show that Clear Zinc hardened fasteners can experience performance problems in wet or corrosive environments. Accordingly, use this product in dry, interior, and noncorrosive environments only

® Quik Drive® Collated Metal Screw Self-Drilling X Metal Screws Quik Drive Collated ITEM CODE SHANK LENGTH THREADS POINT FINISH CARTON APPLICATION(S) Common Applications: SIZE IN IN PER INCH SIZE QTY. SIM XQ1S1016* #10 1 16 3 Quik Guard 1500 Steel stitching, cold formed steel framing • Steel decking to structural steel SIM XQ1S1214* #12 1 14 3 Quik Guard 1500 Steel stitching, cold formed steel framing • Steel stitching (“side-lap” stitching) SIM XQ78S1224* #12 7/8 24 4 Quik Guard 1500 SIM XQ114S1224* #12 1-1/4 24 5 Quik Guard 1500 Steel decking to structural steel, • Cold-formed steel framing SIM XQ112S1224* #12 1-1/2 24 5 Quik Guard 1500 cold formed steel framing Features & Benefits: } SIMSIM X1S1016X1S1016 #10#10 1 1616 3 ClearClear ZincZinc 1 1500500 S Steelteel sstitching,titching, ccoldold formedformed steelsteel framingframing • 5/16" hex head SIMSIM X1S1214X1S1214 #10#10 1 1414 3 ClearClear ZincZinc 1 1500500 S Steelteel sstitching,titching, ccoldold formedformed steelsteel framingframing • Drill point SIMSIM X114S1214X114S1214 #12#12 1 1-1/4-1/4 2424 5 ClearClear ZincZinc 1 1500500 S Steelteel ddeckingecking ttoo sstructuraltructural ssteel,teel, • Hex washer head coldcold formedformed steelsteel framingframing • Straight collation Codes/Standards: Quik Guard® Coating is a proprietary coating consists of an electrodeposited base layer ICC-ES ESR-3006, City of LA RR25670 and RR25917, ASTM with organic paint layer that provides equivalent protection to hot-dip galvanization in some exposures. In ASTM B117 salt spray test at 1000 hours of exposure, Quik Guard coating has an C1513 compliant, FM Approval #3045651, SDI DDM03, average 1.9% red rust. Appendix VII, IAPMO-UES ER-326

11 www.shoptanner.com email: [email protected] 800 456-2658 714 Montauk Ave., Brooklyn, NY 11208 718 434-4500 Fax: 718 434-3215 60-01 55th Drive, Maspeth, NY 11378 718 786-2050 Fax: 718 228-7297 800 3rd Ave., Brooklyn, NY 11232 929 337-1821 Fasteners 8_17.qxp_Layout 1 8/18/17 11:55 AM Page 12 SELF-DRILLING SCREWS

SHEATING-TO-CFS Strong. Drive® PPSD Metal Screws Common Applications: • Subfloor/sheathing to cold-formed steel Strong. Drive® PPSD Sheathing-To-CFS Screws Bulk Cartons

FASTENERS ITEM CODE SHANK LENG TH THREADS POINT MIN. HEAD FINISH CARTON • #8 – maximum thickness: 54 mils/16 ga. SIZE PER INCH SIZE DIAMETER QTY. • #10, #12 – maximum thickness: 97 mils/12 ga. SIM PPSDQ11516B-4K #8 1-15/16” 18 2 .323” Quik Guard 4000 Features & Benefits: SIM PPSDQ134B1016-4K #10 1-3/4” 16 3 .333” Quik Guard 4000 SIM PPSDQ134B1214-4Kl #12 1-3/4” 16 3 .333” Quik Guard 4000 • Flat head with nibs for easy countersinking SIM PPSDQ3B1016-2K #10 3” 16 3 .333” Quik Guard 2000 • #3 square drive (Driver bit in each box; replacement SIM PPSDQ3B11214-2Kl #12 3” 16 3 .333” Quik Guard 2000 bit model BIT3S) SIMSIM PPSD11516B-4KPPSD11516B-4K #8#8 1 1-15/16”-15/16” 1818 2 .323”.323” YellowYellow ZincZinc 40004000 • Fine threads • Pilot point • Yellow-zinc coating SIMSIM PPSD134B1016-4KPPSD134B1016-4K #10#10 1-3/4”1-3/4” 1616 3 .333”.333” YellowYellow ZincZinc 40004000 SIMSIM PPSD134B1214-4KPPSD134B1214-4K l #12#12 1-3/4”1-3/4” 1616 3 .333”.333” YellowYellow ZincZinc 40004000 • Curved collation SIMSIM PPSD3B1016-2KPPSD3B1016-2K #10#10 3”3” 1616 3 .333”.333” YellowYellow ZincZinc 20002000 • 0.315" head diameter meets AISI lateral design standard SIMSIM PPSD3B1214-2KPPSD3B1214-2K l #12#12 3”3” 1616 3 .333”.333” YellowYellow ZincZinc 20002000

Codes/Standards: l Underhead nibs • ICC-ES ESR-3006 (excludes PPSDQ134S1214 and PPSDQ3S1214); City of LA Research Report RR25670 (excludes #12 screw sizes); ASTM C1513 compliant

Strong. Drive® PPSD Collated Metal Screws Strong. Drive PPSD Sheathing-To-CFS Screw Collated Common Applications: ITEM CODE SHANK LENG TH THREADS POINT MIN. HEAD FINISH CARTON SIZE PER INCH SIZE DIAMETER QTY. • As per above SIM PPSDQ11516S0818* #8 1-15/16"18 2 .315" Quik Guard 2000 Features & Benefits: SIM PPSDQ134S1016* #10 1-3/4" 16 3 .325" Quik Guard 2000 SIM PPSDQ134S1214*l #12 1-3/4" 16 3 .452" Quik Guard 1000 • Flat head • Fine threads • Pilot point • Curved collation SIM PPSDQ3S1016* #10 3" 16 3 .325" Quik Guard 1000 • #3 square drive (driver bit in each box; use replacement SIM PPSDQ3S1214*l #12 3" 16 3 .452" Quik Guard 1000 bit model BIT3SU for Quik Guard® and BIT3S for Yellow- SIMSIM PPSD11516S0818PPSD11516S0818 # #88 1-15/16"181-15/16"18 2 .315".315" YellowYellow ZincZinc 20002000 Zinc Coating) SIMSIM PPSD134S1016PPSD134S1016 #10#10 1-3/4"1-3/4" 1616 3 .325".325" YellowYellow ZincZinc 20002000 SIMSIM PPSD134S1214PPSD134S1214 l #12#12 1-3/4"1-3/4" 1616 3 .452".452" Y Yellowellow ZincZinc 10001000 • #8 and #10 screws meet minium head diameter SSIMIM PPPSD3S1016PSD3S1016 #10#10 3"3" 1616 3 .325".325" YellowYellow ZincZinc 10001000 requirement per AISI S213-07, lateral design standard SIMSIM PPSD3S1214PPSD3S1214 l #12#12 3"3" 1616 3 .452".452" YellowYellow ZincZinc 30003000 Codes/Standards: l Underhead nibs • As per above * These coated fasteners possess a level of corrosion resistance that makes them suitable for use in some exterior and corrosive Available Coatings: environments and with some preservative-treated woods. For applications in higher-exposure applications, consider Type-300 series stainless-steel fasteners for superior corrosion resistance • ASTM C1513 compliant . WARNING: Industry studies show that Yellow Zinc hardened fasteners can experience performance problems in wet or corrosive environments. Accordingly, use this product in dry, interior, and noncorrosive environments only

CBSDQ Collated Metal Screws Common Applications: • Sheathing to cold-formed steel (Recommended thicknesses: 16 and 18 ga.) Features & Benefits: • Ribbed flat head with nibs for easy countersinking • #2 undersized square drive (driver bit in each box; CBSDQ Sheathing-to-CFS Screw Collated ITEM CODE SHANK LENG TH THREADS POINT MIN. HEAD FINISH CARTON replacement bit model BIT2SU) SIZE PER INCH SIZE DIAMETER QTY. • #2 drill point with wings SIM CBSDQ158S* #8 16 1-5/8" 2 .322" Quik Guard 1500 • Curved collation SIM CBSDQ214S* #10 16 2-1/4" 2 .322" Quik Guard 1000 Codes/Standards: • ASTM C1513 compliant, #8 screws meet minimum head diameter requirement per AISI S213-07, Lateral Design Standard. 12 800 456-2658 email: [email protected] www.shoptanner.com 714 Montauk Ave., Brooklyn, NY 11208 718 434-4500 Fax: 718 434-3215 60-01 55th Drive, Maspeth, NY 11378 718 786-2050 Fax: 718 228-7297 800 3rd Ave., Brooklyn, NY 11232 929 337-1821 Fasteners 8_17.qxp_Layout 1 8/18/17 11:55 AM Page 13 SELF-DRILLING SCREWS

AUTO-FEED SCREW DRIVING SYSTEM

PROSD150 Steel-Decking System Self-Drilling X Metal Screws

Common Applications: Innovative Precision PROSD150 System • Steel decking to structural steel members Placement™ nosepiece • PROSD150 Steel-Decking Attachment • Innovative Precision Placement™ nosepiece. allows for easy location (also sold separately) • Auto-feed mechanism provides hands-free • Extension screw advancement, eliminating handling • Screwdriver motor of individual screws, cuts installation time in half. • Screw quiver • Rugged toolbox Limited lifetime warranty on attachment and extension,1- year limited warranty on screw-driver motors

Steel Deck Diaphragm Calculator The Steel Deck Diaphragm Calculator provides diaphragm shear strengths of a steel deck when using Simpson Strong-Tie® Quik Drive® screws. The Diaphragm Capacity Tables calculator can be used to develop a table of diaphragm capacities based on the effects of combined shear and tension, or the Optimized Solutions can be used to provide optimized fastening solutions for a given shear and uplift. Program Features: • Requires minimal input to generate tables • Tables can be created for any Simpson support or side-lap fastener combination • Create a custom table with any support fastener pattern • Accounts for wind uplift demand • Produce custom tables for floor decks with any typical fill type • Generate tables in Nominal, ASD Wind, LRFD Wind, or LRFD EQ or ASD EQ

PRO300S Decking System Sheating-To-CFS

Common Applications: Non-skid teeth are reversible and replaceable PRO300S System • Use for decking on decks and docks, subfloor to wood or steel, • PRO300S Steel-Decking Attachment (also sold separately) wall plates, stair treads, sheathing, fiber-cement siding to steel • Extension • Expanded depth settings for high-density flooring materials • Screwdriver motor • Reversible and replaceable non-skid teeth • Screw quiver • Uniform toenailing and countersink on slick surfaces • Rugged toolbox • Sure-grip guide tube increases stability for a broad range of screws • The patented curved collation strips hold the screws up and away from the work surface, making moving and positioning the tool easier. They are also pointed on the inserted end to simplify loading. Limited lifetime warranty on attachment and extension,1- year limited warranty on screw-driver motors

13 www.shoptanner.com email: [email protected] 800 456-2658 714 Montauk Ave., Brooklyn, NY 11208 718 434-4500 Fax: 718 434-3215 60-01 55th Drive, Maspeth, NY 11378 718 786-2050 Fax: 718 228-7297 800 3rd Ave., Brooklyn, NY 11232 929 337-1821 Fasteners 8_17.qxp_Layout 1 8/18/17 11:55 AM Page 14 SELF-DRILLING SCREWS

SELF-DRILLINGSELF-D SCREWS Globally Sourced A self-drillingself-drillin screw has a drill-bit point to help drill into metal without pre- Drill Point Size drillingdrilling holeshole in steel base materials up to 1/2” thick. Self-drilling screws are The length of the drill point determines the material thickness which the availableavailable inin a variety of head styles, thread lengths and drill flute lengths for screw can reliably penetrate. The unthreaded portion of the point, known as

FASTENERS screwscrew diametersdiam #6 thru 5/16’-18. They are also referred to as tek screws. the pilot, must be long enough to completely drill through the material before the threads engage. Since threads advance faster than the drilling process, if Self-drillingSelf-drilling screws create their own hole and form their own mating thread they engage before drilling is done the fastener can bind and break. in the process. Designed for convenience, self-drilling screws require only a screwgun to fix them in place, instead of using a drill to start the hole. RPM When selecting a self-drilling screw design, it is important to consider the The speed at which the screwdriver motor runs while the screw is installed. material thickness and type of materials to be joined. This is often adjustable using a variable-pull trigger or different driver motor.

Recommendation & Performance Data Ultimate Value Chart

IDENTIFICATION RECOMMENDATION PERFORMANCE Tension (Pull Out) Lbs. and Shear Lbs. Metal to Metal METAL GAUGE 1(LB) THICKNESS Metal Drill Axial Drill Nom. Min. Diam. Drive Drill Pt. Inches Gauge Speed Material Load Time Screw Drill Torsional Rpm Lbs. Sec. Dia. Dia. Pt. Strength 25 22 20 18 16 14 12 3/16” 1/4” 3/8” 1/2” #6 1/4” #2 .036” - .078” 20-14 2500 0.060” 30 3.0 6-20 0.138 #2 24 128 176 263 426 598 911 1156 - - - - #8 1/4” #2 .036” - .094” 20-13 2500 0.060” 30 4.0 - 449 683 728 1091 1148 - - - - - #10 5/16” #2 .036” - .109” 20-12 2500 0.060” 30 4.0 8-18 0.164 #2 42 97 196 285 444 550 924 1100 - - - - #10 1/4” #2 .036” - .109” 20-12 2500 0.060” 30 4.0 --580 829 1096 1332 1337 - - - - #10 5/16” #3 .109” - .179” 20-8 2500 0.135” 40 6.0 10-16 0.190 #3 61 - - 389 554 727 1050 1216 - - - - #12 5/16” #2 pilot .036” - .210” 20-6 2500 0.135” 40 6.0 - 602 811 1223 1492 1545 1650 - - - - #12 5/16” #3 .100” - .220” 22-5 2500 0.135” 40 7.0 12-14 0.216 #3 92 - - 314 472 735 1057 1242 3394 - - - #12 3/8” #4 .170” - .375” 8-000 1500 0.370” 60 16.0 - - 698 983 1556 2072 2210 - - - - #14 3/8” #1 stitch .036” - .094” 20-13 2500 0.060” 30 5.0 12-24 0.216 #5 92 - - - 468 697 986 1535 3124 3696 - - #14 3/8” #3 .109” - .250” 12-3 1500 0.250” 50 18.0 ------2650 - 3310 #14 3/8” #4 .109” - .375” 12-000 1500 0.375” 60 20.0 1/4-14 0.250 #1 150 332 431 565 803 1154 ------#14 3/8” #5 .179” - .500” 8-0000000 1200 0.500” 60 30.0 ------Drilling capacities may vary. This table is intended only as a guide and does not constitute a 1/4-14 0.250 #3 150 - - 300 402 776 1057 1477 3941 - - - warranty of any kind. - - 930 1442 2100 2584 2650 - - - - 1/4-20 0.250 #4 150 - - - - 601 896 1445 3520 - - - Steel Stud Gauge Guide 2650 - 2820 1/4-20 0.250 #5 150 ------2672 3629 3791 4739 Drywall Structural ------2650 - 2820 Steel Gauge 26 25 22 20 20 18 16 14 12 10 These figures are offered only as a guide and are not guaranteed in any way by Tanner Fasteners & Thickness (In.) 0.0163 0.0179 0.0269 0.0296 0.0329 0.0428 0.0538 0.0677 0.0966 0.1180 Industrial Supplies. A 4:1 safety ratio is recommended. Thickness (Mil.) 16 18 27 30 33 43 54 68 97 118 The information and data contained on this page is current as of publication date.

Plating Comparison Chart All Salt Spray Certification in accordance with ASTM B117 CORROSION PRODUCT/FINISH FINISH CONTENT APPLICATION RESISTANCE ADVANTAGES Zinc Zinc Phosphate Minimum Corrosion Resistance for all 24 Hour Price Carbon Steel Fasteners Salt Spray Tanner Guard Three Layer Process Exterior Application, Metal Building, Wood 1000 Hour Excellent Corrosion Resistance against Gas, Salt Water, Decking/Fencing Cement Board Concrete/ Salt Spray Weathering & other corrosive factors including Masonry contact with other materials Tanner Ultra-Guard Zinc/Chrome Substrate with For use with any ACQ Treated Lumber 1000 Hour Superior Corrosion Resistance specifically Proprietary Organic Topcoat Salt Spray in ACQ Treated Lumber ACQ Approved

Tanner Pro Ultra-Guard Zinc/Chrome Substrate with For use with any ACQ Treated Lumber 2000 Hour Best Coating Available specifically Proprietary Organic Topcoat Salt Spray in ACQ Treated Lumber ACQ Approved Tanner Ceramic Primeseal Base Coat with Aluminum Industry 2000 Hour Best Coating Available for Extreme Environments Multi-Color Color Stable Top Coat Salt Spray in the Aluminum Industry 14 800 456-2658 email: [email protected] www.shoptanner.com 714 Montauk Ave., Brooklyn, NY 11208 718 434-4500 Fax: 718 434-3215 60-01 55th Drive, Maspeth, NY 11378 718 786-2050 Fax: 718 228-7297 800 3rd Ave., Brooklyn, NY 11232 929 337-1821 Fasteners 8_17.qxp_Layout 1 8/18/17 11:55 AM Page 15 SELF-DRILLING SCREWS

SELF-DRILLING SCREWS Globally Sourced Zinc Plated/Tanner-Guard

HexH WasherW h Head Self-Drilling Screws Zinc Plated Hex WasherW h HeadH d Self-DrillingS lf D illi ScrewsS Zinci Platedl - Buckets ITEM CODE SIZE PT. SIZE DRIVE SIZE BOX QTY. ITEM CODE CTN. QTY. ITEM CODE SIZE BUCKET QTY. 6N37UHWZ #6 x 3/8" #2 1/4" 100 6N37UHWZ/BULK 15000 TB-620 #8 x 1/2" 10000 6N50UHWZ #6 x 1/2" #2 1/4" 100 6N50UHWZ/BULK 15000 TB-622 #8 x 3/4" 10000 6N62UHWZ #6 x 5/8" #2 1/4" 100 6N62UHWZ/BULK 10000 TB-624 #8 x 1" 8000 6N75UHWZ #6 x 3/4" #2 1/4" 100 6N75UHWZ/BULK 12000 TB-630 #10 x 1/2" 10000 6N100UHWZ #6 x 1" #2 1/4" 100 6N100UHWZ/BULK 10000 TB-632 #10 x 3/4" 7000 6N125UHWZ #6 x 1-1/4" #2 1/4" 100 6N125UHWZ/BULK 9000 TB-634 #10 x 1" 5000 TB-636 #10 x 1-1/2" 2500 6N150UHWZ #6 x 1-1/2" #2 1/4" 100 6N150UHWZ/BULK 9000 Tanner offers its trademarked 8N50UHWZ #8 x 1/2" #2 1/4" 100 8N50UHWZ/BULK 10000 TB-638 #10 x 2" 2000 Bucket of Bolts™! specially 8N56UHWSZ* #8 x 9/16" #2 1/4" 100 8N56UHWZ/BULK* 10000 TB-640 #12 x 3/4" 5000 TB-642 #12 x 1" 4000 8N62UHWZ #8 x 5/8" #2 1/4" 100 8N62UHWZ/BULK 10000 developed with the contractor in mind. TB-644 #12 x 1-1/4" 3000 8N75UHWZ #8 x 3/4" #2 1/4" 100 8N75UHWZ/BULK 10000 Our best selling items are packaged in 3-1/2 TB-646 #12 x 1-1/2" 3000 8N100UHWZ #8 x 1" #2 1/4" 100 8N100UHWZ/BULK 8000 TB-648 #12 x 2" 2000 gallon plastic pails with a sturdy handle and 8N125UHWZ #8 x 1-1/4" #2 1/4" 100 8N125UHWZ/BULK 5000 TB-656 #14 x 3/4" 4000 reusable screw type top. The Tanner bucket 8N150UHWZ #8 x 1-1/2" #2 1/4" 100 8N150UHWZ/BULK 5000 TB-658 #14 x 1" 3000 prevents product loss at the jobsite due to 8N200UHWZ #8 x 2" #2 1/4" 100 8N200UHWZ/BULK 4000 TB-660 #14 x 1-1/4" 2000 spillage and broken cardboard boxes. 8N250UHWZ #8 x 2-1/2" #2 1/4" 100 8N250UHWZ/BULK 2000 TB-661 #14 x 1-1/2" 2000 10N50UHWZ #10 x 1/2" #2 5/16" 100 10N50UHWZ/BULK 8000 TB-662 #14 x 2" 2000 Please look for the bucket logo throughout 10N62UHWZ #10 x 5/8 #2 5/16" 100 10N62UHWZ/BULK 7500 TB-666 #14 x 3" 1000 our catalog. 10N75UHWZ #10 x 3/4" #3 5/16" 100 10N75UHWZ/BULK 7000 10N75UHWZ/HH** #10 x 3/4" #3 5/16" 100 10N75UHWZHH/BULK** 6000 10N100UHWZ #10 x 1" #3 5/16" 100 10N100UHWZ/BULK 5000 10N125UHWZ #10 x 1-1/4" #3 5/16" 100 10N125UHWZ/BULK 3500 10N150UHWZ #10 x 1-1/2" #3 5/16" 100 10N150UHWZ/BULK 5000 10N175UHWZ #10 x 1-3/4" #3 5/16" 100 10N175UHWZ/BULK 2500 10N200UHWZ #10 x 2" #3 5/16" 100 10N200UHWZ/BULK 3000 Hex Washer Head Self-Drilling Screws Tanner-Guard Coating 10N250UHWZ #10 x 2-1/2" #3 5/16" 100 10N250UHWZ/BULK 2000 ITEM CODE SIZE PT. SIZE DRIVE SIZE CTN. QTY. 10N300UHWZ #10 x 3" #3 5/16" 100 10N300UHWZ/BULK 1000 8N50UHWDC/BULK #8 x 1/2" #2 1/4" 10000 12N75UHWZ #12 x 3/4" #3 5/16" 100 12N75UHWZ/BULK 5000 8N75UHWDC/BULK #8 x 3/4" #2 1/4" 10000 12N75UHWSZ* #12 x 3/4" #3 1/4" 100 12N75UHWSZ/BULK 5000 8N100UHWDC/BULK #8 x 1" #2 1/4" 7500 12N100UHWZ #12 x 1" #3 5/16" 100 12N100UHWZ/BULK 4000 10N75UHWDC/BULK #10 x 3/4" #3 5/16" 7000 12N125UHWZ #12 x 1-1/4" #3 5/16" 100 12N125UHWZ/BULK 3500 10N100UHWDC/BULK #10 x 1" #3 5/16" 5000 12N150UHWZ #12 x 1-1/2" #3 5/16" 100 12N150UHWZ/BULK 3500 10N125UHWDC/BULK #10 x 1-1/4" #3 5/16" 3500 12N200UHWZ #12 x 2" #3 5/16" 100 12N200UHWZ/BULK 1300 10N150UHWDC/BULK #10 x 1-1/2" #3 5/16" 3000 12N250UHWZ #12 x 2-1/2" #3 5/16" 100 12N250UHWZ/BULK 1000 10N200UHWDC/BULK #10 x 2" #3 5/16" 2000 10N250UHWDC/BULK #10 x 2-1/2" #3 5/16" 2000 12N300UHWZ #12 x 3" #3 5/16" 100 12N300UHWZ/BULK 2000 12N75UHWDC/BULK #12 x 3/4" #3 5/16" 5000 14N75UHWZ #14 x 3/4" #3 3/8" 100 14N75UHWZ/BULK 3500 12N100UHWDC/BULK #12 x 1" #3 5/16" 3500 14N75UHWSZ* #14 x 3/4" #3 1/4" 100 14N75UHWSZ/BULK 3500 12N125UHWDC/BULK #12 x 1-1/4" #3 5/16" 3500 14N100UHWZ #14 x 1" #3 3/8" 100 14N100UHWZ/BULK 3000 12N150UHWDC/BULK #12 x 1-1/2" #3 5/16" 2500 14N125UHWZ #14 x 1-1/4" #3 3/8" 100 14N125UHWZ/BULK 2500 12N200UHWDC/BULK #12 x 2" #3 5/16" 2000 14N150UHWZ #14 x 1-1/2" #3 3/8" 100 14N150UHWZ/BULK 2500 12N250UHWDC/BULK #12 x 2-1/2" #3 5/16" 1000 14N200UHWZ #14 x 2" #3 3/8" 100 14N200UHWZ/BULK 2000 12N300UHWDC/BULK #12 x 3" #3 5/16" 1000 14N250UHWZ #14 x 2-1/2" #3 3/8" 100 14N250UHWZ/BULK 1200 12N400UHWDC/BULK #12 x 4" #3 5/16" 500 14N300UHWZ #14 x 3" #3 3/8" 100 14N300UHWZ/BULK 1000 14N75UHWDC/BULK #14 x 3/4" #3 3/8" 3500 14N350UHWZ #14 x 3-1/2" #3 3/8" 100 14N350UHWZ/BULK 1000 14N100UHWDC/BULK #14 x 1" #3 3/8" 2500 14N400UHWZ #14 x 4" #3 3/8" 100 14N400UHWZ/BULK 500 14N125UHWDC/BULK #14 x 1-1/4" #3 3/8" 2000 14N450UHWZ #14 x 4-1/2" #3 3/8" 100 14N450UHWZ/BULK 600 14N150UHWDC/BULK #14 x 1-1/2" #3 3/8" 2000 14N500UHWZ #14 x 5" #3 3/8" 100 14N500UHWZ/BULK 500 14N200UHWDC/BULK #14 x 2" #3 3/8" 1500 14N600UHWZ #14 x 6" #3 3/8" 100 14N600UHWZ/BULK 400 14N250UHWDC/BULK #14 x 2-1/2" #3 3/8" 1000 14N800UHWZ #14 x 8" #3 3/8" 50 14N800UHWZ/BULK 250 14N300UHWDC/BULK #14 x 3" #3 3/8" 1000 14N400UHWDC/BULK #14 x 4" #3 3/8" 500 * with serrations under head ** Head Height .139-.155 with serrations under head 14N500UHWDC/BULK #14 x 5" #3 3/8" 500 Note: Bulk Carton quantities may vary 14N600UHWDC/BULK #14 x 6" #3 3/8" 500 14N700UHWDC/BULK #14 x 7" #3 3/8" 250 14N800UHWDC/BULK #14 x 8" #3 3/8" 250 15 www.shoptanner.com email: [email protected] 800 456-2658 714 Montauk Ave., Brooklyn, NY 11208 718 434-4500 Fax: 718 434-3215 60-01 55th Drive, Maspeth, NY 11378 718 786-2050 Fax: 718 228-7297 800 3rd Ave., Brooklyn, NY 11232 929 337-1821 Fasteners 8_17.qxp_Layout 1 8/18/17 11:55 AM Page 16 SELF-DRILLING SCREWS

SELF-DRILLINGSELF-DR SCREWS Globally Sourced CorrosionCorrosio Resistant Coating FASTENERS HexHex WasherWashe Head Self-Drilling Screws w/Neoprene Bonded Washers Hex Washer Head Self Drilling Screws-Extended Drilling Capacity Tanner-GuardT G Coating Tanner-Guard Coating ITEM CODE SIZE PT. SIZE DRIVE SIZE WASHER O.D. CTN. QTY. ITEM CODE SIZE PT. SIZE DRIVE SIZE WASHER O.D. CTN. QTY. 8N50UHWNBC/BULK #8 x 1/2" #2 1/4" 1/2" 5000 12C87UHW4C/BULK 12-24 x 7/8" #4 5/16" 4000 8N75UHWNBC/BULK #8 x 3/4" #2 1/4" 1/2" 3500 12C125UHW5C/BULK 12-24 x 1-1/4" #5 5/16" 4000 8N100UHWNBC/BULK #8 x 1" #2 1/4" 1/2" 3500 12C150UHW5C/BULK 12-24 x 1-1/2" #5 5/16" 2000 8N125UHWNBC/BULK #8 x 1-1/4" #2 1/4" 1/2" 3000 12C200UHW5C/BULK 12-24 x 2" #5 5/16" 2000 8N150UHWNBC/BULK #8 x 1-1/2" #2 1/4" 1/2" 2500 25C300UHW5C/BULK 1/4"-20 x 3" #5 5/16" 1000 10N62UHWNBC/BULK #10 x 5/8 #3 5/16" 1/2" 5000 25C400UHW5C/BULK 1/4"-20 x 4" #5 3/8" 500 10N75UHWNBC/BULK #10 x 3/4" #3 5/16" 1/2" 5000 25C500UHW5C/BULK 1/4"-20 x 5" #5 3/8" 250 10N100UHWNBC/BULK #10 x 1" #3 5/16" 1/2" 4000 25C600UHW5C/BULK 1/4"-20 x 6" #5 3/8" 250 10N125UHWNBC/BULK #10 x 1-1/4" #3 5/16" 1/2" 3500 25C700UHW5C/BULK 1/4"-20 x 7" #5 3/8" 250 10N150UHWNBC/BULK #10 x 1-1/2" #3 5/16" 1/2" 3000 25C800UHW5C/BULK 1/4"-20 x 8" #5 3/8" 250 10N200UHWNBC/BULK #10 x 2" #3 5/16" 1/2" 2000 10N300UHWNBC/BULK #10 x 3" #3 5/16" 1/2" 1000 12N75UHWNBC/BULK #12 x 3/4" #3 5/16" 9/16" 3000 12N100UHWNBC/BULK #12 x 1" #3 5/16" 9/16" 3000 12N125UHWNBC/BULK #12 x 1-1/4" #3 5/16" 9/16" 3000 12N150UHWNBC/BULK #12 x 1-1/2" #3 5/16" 9/16" 2500 12N200UHWNBC/BULK #12 x 2" #3 5/16" 9/16" 1500 12N250UHWNBC/BULK #12 x 2-1/2" #3 5/16" 9/16" 1000 12N300UHWNBC/BULK #12 x 3" #3 5/16" 9/16" 1000 12N400UHWNBC/BULK #12 x 4" #3 5/16" 9/16" 500 Hex Washer Head Self Drilling Screws w/Neoprene Bonded Washers 14N75UHWNBC/BULK #14 x 3/4" #3 3/8" 5/8" 3000 14N100UHWNBC/BULK #14 x 1" #3 3/8" 5/8" 2500 Extended Drilling Capacity-Tanner-Guard Coating 14N125UHWNBC/BULK #14 x 1-1/4" #3 3/8" 5/8" 2000 ITEM CODE SIZE PT. SIZE DRIVE SIZE WASHER O.D. CTN. QTY. 14N150UHWNBC/BULK #14 x 1-1/2" #3 3/8" 5/8" 1500 12C87UHWB4C/BULK 12-24 x 7/8" #4 5/16" 4000 14N200UHWNBC/BULK #14 x 2" #3 3/8" 5/8" 1500 12C125UHWB5C/BULK 12-24 x 1-1/4" #5 5/16" 2000 14N250UHWNBC/BULK #14 x 2-1/2" #3 3/8" 5/8" 1000 12C150UHWB5C/BULK 12-24 x 1-1/2" #5 5/16" 2000 14N300UHWNBC/BULK #14 x 3" #3 3/8" 5/8" 1000 12C200UHWB5C/BULK 12-24 x 2" #5 5/16" 2000 14N400UHWNBC/BULK #14 x 4" #3 3/8" 5/8" 500 25C300UHWB5C/BULK 1/4"-20 x 3" #5 5/16" 1000 14N500UHWNBC/BULK #14 x 5" #3 3/8" 5/8" 500 25C400UHWB5C/BULK 1/4"-20 x 4" #5 3/8" 500 14N600UHWNBC/BULK #14 x 6" #3 3/8" 5/8" 500 25C500UHWB5C/BULK 1/4"-20 x 5" #5 3/8" 250 14N700UHWNBC/BULK #14 x 7" #3 3/8" 5/8" 250 25C600UHWB5C/BULK 1/4"-20 x 6" #5 3/8" 250 14N800UHWNBC/BULK #14 x 8" #3 3/8" 5/8" 250 25C700UHWB5C/BULK 1/4"-20 x 7" #5 3/8" 250 25C800UHWB5C/BULK 1/4"-20 x 8" #5 3/8" 250

Hex Flange Head Self-Drilling Screws w/Rubber Washers Tanner-Guard Coating ITEM CODE SIZE PT. SIZE DRIVE SIZE WASHER O.D. CTN. QTY. 10N75UHFBC/BULK #10 x 3/4" #3 5/16" 4000 10N100UHFBC/BULK #10 x 1" #3 5/16" 3000 10N150UHFBC/BULK #10 x 1-1/2" #3 5/16" 3000 12N75UHFBC/BULK #12 x 3/4" #3 5/16" 3000 12N100UHFBC/BULK #12 x 1" #3 5/16" 3000 12N125UHFBC/BULK #12 x 1-1/4" #3 5/16" 2500 12N150UHFBC/BULK #12 x 1-1/2" #3 5/16" 2000 12N200UHFBC/BULK #12 x 2" #3 5/16" 1500 14N75UHFBC/BULK #14 x 3/4" #3 3/8" 2500 14N100UHFBC/BULK #14 x 1" #3 3/8" 2000 14N125UHFBC/BULK #14 x 1-1/4" #3 3/8" 1500 14N150UHFBC/BULK #14 x 1-1/2" #3 3/8" 1000 14N200UHFBC/BULK #14 x 2" #3 3/8" 1000 16 800 456-2658 email: [email protected] www.shoptanner.com 714 Montauk Ave., Brooklyn, NY 11208 718 434-4500 Fax: 718 434-3215 60-01 55th Drive, Maspeth, NY 11378 718 786-2050 Fax: 718 228-7297 800 3rd Ave., Brooklyn, NY 11232 929 337-1821 Fasteners 8_17.qxp_Layout 1 8/18/17 11:56 AM Page 17 SELF-DRILLING SCREWS

SELF-DRILLING SCREWS Globally Sourced Zinc Plated

Pan Phillips Head Self-Drilling Screws Zinc Plated Pan Phillips Head Self-Drilling Screws Zinc Plated - Buckets ITEM CODE SIZE PT. SIZE DRIVE SIZE BOX QTY. ITEM CODE CTN. QTY. ITEM CODE SIZE BUCKET QTY. 6N37UPPZ #6 x 3/8" #2 #2 100 6N37UPPZ/BULK 15000 TB-600 #8 x 1/2" 10000 6N50UPPZ #6 x 1/2" #2 #2 100 6N50UPPZ/BULK 15000 TB-602 #8 x 3/4" 10000 Tanner offers its trademarked 6N62UPPZ #6 x 5/8" #2 #2 100 6N62UPPZ/BULK 10000 TB-604 #8 x 1" 8000 Bucket of Bolts™! specially 6N75UPPZ #6 x 3/4" #2 #2 100 6N75UPPZ/BULK 10000 TB-610 #10 x 1/2" 10000 developed for the contractor. 6N100UPPZ #6 x 1" #2 #2 100 6N100UPPZ/BULK 10000 TB-612 #10 x 3/4" 7000 Please look for the bucket logo throughout 8N37UPPZ #8 x 3/8" #2 #2 100 8N37UPPZ/BULK 10000 TB-614 #10 x 1" 5000 8N50UPPZ #8 x 1/2" #2 #2 100 8N50UPPZ/BULK 10000 TB-616 #10 x 1-1/2" 2500 our catalog. 8N62UPPZ #8 x 5/8" #2 #2 100 8N62UPPZ/BULK 10000 8N75UPPZ #8 x 3/4" #2 #2 100 8N75UPPZ/BULK 10000 8N100UPPZ #8 x 1" #2 #2 100 8N100UPPZ/BULK 8000 Pan Head Square Drive Self-Drilling Screws Zinc Plated 8N125UPPZ #8 x 1-1/4" #2 #2 100 8N125UPPZ/BULK 5000 ITEM CODE SIZE PT. SIZE DRIVE SIZE CTN. 8N150UPPZ #8 x 1-1/2" #2 #2 100 8N150UPPZ/BULK 5000 8N50UPSQZ/BULK #8 x 1/2" #2 #2 10000 8N200UPPZ #8 x 2" #2 #2 100 8N200UPPZ/BULK 3000 8N75UPSQZ/BULK #8 x 3/4" #2 #2 10000 8N250UPPZ #8 x 2-1/2" #2 #2 100 8N250UPPZ/BULK 2500 8N100UPSQZ/BULK #8 x 1" #2 #2 7500 10N50UPPZ #10 x 1/2" #2 #2 100 10N50UPPZ/BULK 8000 10N75UPSQZ/BULK #10 x 3/4" #3 #2 7500 10N62UPPZ #10 x 5/8" #3 #2 100 10N62UPPZ/BULK 6000 10N100UPSQZ/BULK #10 x 1" #3 #2 5000 10N75UPPZ #10 x 3/4" #3 #2 100 10N75UPPZ/BULK 6000 10N150UPSQZ/BULK #10 x 1-1/2" #3 #2 3000 10N100UPPZ #10 x 1" #3 #2 100 10N100UPPZ/BULK 5000 10N125UPPZ #10 x 1-1/4" #3 #2 100 10N125UPPZ/BULK 3500 Bugle Head Phillips Self-Drilling Drywall Screws Zinc Plated 10N150UPPZ #10 x 1-1/2" #3 #2 100 10N150UPPZ/BULK 3000 10N200UPPZ #10 x 2" #3 #2 100 10N200UPPZ/BULK 2000 6N100UDWZ/BULK #6 x 1" #2 #2 10000 6N112UDWZ/BULK #6 x 1-1/8" #2 #2 10000 10N250UPPZ #10 x 2-1/2" #3 #2 100 10N250UPPZ/BULK 2500 6N125UDWZ/BULK #6 x 1-1/4" #2 #2 8000 10N300UPPZ #10 x 3" #3 #2 100 10N300UPPZ/BULK 1500 6N162UDWZ/BULK #6 x 1-5/8" #2 #2 5000 12N75UPPZ #12 x 3/4" #3 #3 100 12N75UPPZ/BULK 3700 6N187UDWZ/BULK #6 x 1-7/8" #2 #2 4000 12N100UPPZ #12 x 1" #3 #3 100 12N100UPPZ/BULK 3000 8N200UDWZ/BULK #8 x 2" #2 #2 3000 12N125UPPZ #12 x 1-1/4" #3 #3 100 12N125UPPZ/BULK 3000 8N237UDWZ/BULK #8 x 2-3/8" #2 #2 3000 12N150UPPZ #12 x 1-1/2" #3 #3 100 12N150UPPZ/BULK 2000 8N262UDWZ/BULK #8 x 2-5/8" #2 #2 2000 12N200UPPZ #12 x 2" #3 #3 100 12N200UPPZ/BULK 1300 8N300UDWZ/BULK #8 x 3" #2 #2 2000 12N250UPPZ #12 x 2-1/2" #3 #3 100 12N250UPPZ/BULK 1500 10N350UDWZ/BULK #10 x 3-1/2" #2 #2 1500 12N300UPPZ #12 x 3" #3 #3 100 12N300UPPZ/BULK 1000 10N400UDWZ/BULK #10 x 4" #2 #2 1000 14N75UPPZ #14 x 3/4" #3 #3 100 14N75UPPZ/BULK 2800 14N100UPPZ #14 x 1" #3 #3 100 14N100UPPZ/BULK 2400 14N125UPPZ #14 x 1-1/4" #3 #3 100 14N125UPPZ/BULK 2000 K-Lath Modified Truss Self-Drilling Zinc Plated 14N150UPPZ #14 x 1-1/2" #3 #3 100 14N150UPPZ/BULK 1800 8N50UMLZ/BULK #8 x 1/2" #2 #2 10000 14N200UPPZ #14 x 2" #3 #3 100 14N200UPPZ/BULK 1500 8N75UMLZ/BULK #8 x 3/4" #2 #2 8000 14N250UPPZ #14 x 2-1/2" #3 #3 100 14N250UPPZ/BULK 1200 8N100UMLZ/BULK #8 x 1" #2 #2 5000 14N300UPPZ #14 x 3" #3 #3 100 14N300UPPZ/BULK 1000 8N125UMLZ/BULK #8 x 1-1/4" #2 #2 5000 Note: Bulk Carton quantities may vary 8N162UMLZ/BULK #8 x 1-5/8" #2 #2 4000 8N187UMLZ/BULK #8 x 1-7/8" #2 #2 3000 8N200UMLZ/BULK #8 x 2" #2 #2 3000 8N250UMLZ/BULK #8 x 2-1/2 #2 #2 2500 Self Drilling Eyelags Steel Zinc Plated 8N300UMLZ/BULK #8 x 3" #2 #2 2000 10N75UMLZ/BULK #10 x 3/4" #2 #3 5000 ITEM CODE SIZE HOLE DIA. THREAD LTH. FLANGE DIA. CTN. QTY. 14N200ELSDZ/BULK #14 x 2" 3/16" 3/4" 9/16" 2000 14N300ELSDZ/BULK #14 x 3" 3/16" 2" 9/16" 1000 Pan Head Phillips Framing Self Drilling Screws Black Phosphate 7N43UDF/BULK #7 x 7/16" #2 #2 15000 Trim Head Square Drive Self-Drilling Zinc Plated ITEM CODE SIZE PT. SIZE DRIVE SIZE CTN. QTY. 6N100UTQZ/BULK #6 x 1" #2 #1 10000 6N162UTQZ/BULK #6 x 1-5/8" #2 #1 5000 Pan Head Phillips Framing Self Drilling Screws Zinc Plated 6N225UTQZ/BULK #6 x 2-1/4" #2 #1 3000 8N300UTQZ/BULK #8 x 3" #2 #2 2000 7N43UDFZ/BULK #7 x 7/16" #2 #2 15000 17 www.shoptanner.com email: [email protected] 800 456-2658 714 Montauk Ave., Brooklyn, NY 11208 718 434-4500 Fax: 718 434-3215 60-01 55th Drive, Maspeth, NY 11378 718 786-2050 Fax: 718 228-7297 800 3rd Ave., Brooklyn, NY 11232 929 337-1821 Fasteners 8_17.qxp_Layout 1 8/18/17 11:56 AM Page 18 SELF-DRILLING SCREWS

SELF-DRILLING SCREWS Globally Sourced Zinc Plated FASTENERS

Flat Phillips Head Self-Drilling Screws Zinc Plated Flat Phillips Head Undercut Self-Drilling Screws Zinc Plated ITEM CODE SIZE PT. SIZE DRIVE SIZE BOX QTY. ITEM CODE CTN. QTY. ITEM CODE SIZE PT. SIZE DRIVE SIZE BOX QTY. ITEM CODE CTN. QTY. 6N50UFPZ #6 x 1/2" #2 #2 100 6N50UFPZ/BULK 15000 8N50UFPZ/UC #8 x 1/2” #2 100 8N50UFPZ/UC/BULK 10000 6N75UFPZ #6 x 3/4" #2 #2 100 6N75UFPZ/BULK 10000 8N75UFPZ/UC #8 x 3/4” #2 100 8N75UFPZ/UC/BULK 10000 6N100UFPZ #6 x 1" #2 #2 100 6N100UFPZ/BULK 10000 8N100UFPZ/UC #8 x 1” #2 100 8N100UFPZ/UC/BULK 7000 8N50UFPZ #8 x 1/2" #2 #2 100 8N50UFPZ/BULK 10000 8N125UFPZ/UC #8 x 1-1/4” #2 100 8N125UFPZ/UC/BULK 5000 8N75UFPZ #8 x 3/4" #2 #2 100 8N75UFPZ/BULK 10000 8N150UFPZ/UC #8 x 1-1/2” #2 100 8N150UFPZ/UC/BULK 5000 8N100UFPZ #8 x 1" #2 #2 100 8N100UFPZ/BULK 8000 8N200UFPZ/UC #8 x 2” #2 100 8N200UFPZ/UC/BULK 3000 8N125UFPZ #8 x 1-1/4" #2 #2 100 8N125UFPZ/BULK 5000 10N50UFPZ/UC #10 x 1/2” #2 100 10N50UFPZ/UC/BULK 10000 8N150UFPZ #8 x 1-1/2" #2 #2 100 8N150UFPZ/BULK 5000 10N75UFPZ/UC #10 x 3/4” #3 100 10N75UFPZ/UC/BULK 10000 8N200UFPZ #8 x 2" #2 #2 100 8N200UFPZ/BULK 3000 10N100UFPZ/UC #10 x 1” #3 100 10N100UFPZ/UC/BULK 6000 8N300UFPZ #8 x 3" #3 #2 100 8N300UFPZ/BULK 1250 10N125UFPZ/UC #10 x 1-1/4” #3 100 10N125UFPZ/UC/BULK 4000 10N75UFPZ #10 x 3/4" #3 #2 100 10N75UFPZ/BULK 7500 10N150UFPZ/UC #10 x 1-1/2” #3 100 10N150UFPZ/UC/BULK 1000 10N100UFPZ #10 x 1" #3 #2 100 10N100UFPZ/BULK 5000 10N200UFPZ/UC #10 x 2” #3 100 10N200UFPZ/UC/BULK 1000 10N125UFPZ #10 x 1-1/4" #3 #2 100 10N125UFPZ/BULK 3000 10N250UFPZ/UC #10 x 2-1/2” #3 100 10N250UFPZ/UC/BULK 1000 10N150UFPZ #10 x 1-1/2" #3 #2 100 10N150UFPZ/BULK 3000 10N300UFPZ/UC #10 x 3” #3 100 10N300UFPZ/UC/BULK 1000 10N200UFPZ #10 x 2" #3 #2 100 10N200UFPZ/BULK 2000 12N75UFPZ/UC #12 x 3/4” #3 100 12N75UFPZ/UC/BULK 5000 10N300UFPZ #10 x 3" #3 #2 100 10N300UFPZ/BULK 1800 12N100UFPZ/UC #12 x 1” #3 100 12N100UFPZ/UC/BULK 5000 10N400UFPZ #10 x 4" #3 #2 100 10N400UFPZ/BULK 750 12N125UFPZ/UC #12 x 1-1/4” #3 100 12N125UFPZ/UC/BULK 3000 12N75UFPZ #12 x 3/4" #3 #3 100 12N75UFPZ/BULK 5000 12N150UFPZ/UC #12 x 1-1/2” #3 100 12N150UFPZ/UC/BULK 3000 12N100UFPZ #12 x 1" #3 #3 100 12N100UFPZ/BULK 3500 12N200UFPZ/UC #12 x 2” #3 100 12N200UFPZ/UC/BULK 1000 12N125UFPZ #12 x 1-1/4" #3 #3 100 12N125UFPZ/BULK 3500 12N250UFPZ/UC #12 x 2-1/2” #3 100 12N250UFPZ/UC/BULK 1000 12N150UFPZ #12 x 1-1/2" #3 #3 100 12N150UFPZ/BULK 2500 12N300UFPZ/UC #12 x 3” #3 100 12N300UFPZ/UC/BULK 1000 12N200UFPZ #12 x 2" #3 #3 100 12N200UFPZ/BULK 2000 14N75UFPZ/UC #14 x 3/4” #3 100 14N75UFPZ/UC/BULK 4000 12N250UFPZ #12 x 2-1/2" #3 #3 100 12N250UFPZ/BULK 1000 14N100UFPZ/UC #14 x 1” #3 100 14N100UFPZ/UC/BULK 3000 12N300UFPZ #12 x 3" #3 #3 100 12N300UFPZ/BULK 1000 14N125UFPZ/UC #14 x 1-1/4” #3 100 14N125UFPZ/UC/BULK 2500 12N400UFPZ #12 x 4" #3 #3 100 12N400UFPZ/BULK 600 14N150UFPZ/UC #14 x 1-1/2” #3 100 14N150UFPZ/UC/BULK 2000 14N75UFPZ #14 x 3/4" #3 #3 100 14N75UFPZ/BULK 3000 14N200UFPZ/UC #14 x 2” #3 100 14N200UFPZ/UC/BULK 1000 14N100UFPZ #14 x 1" #3 #3 100 14N100UFPZ/BULK 2500 14N250UFPZ/UC #14 x 2-1/2” #3 100 14N250UFPZ/UC/BULK 1000 14N125UFPZ #14 x 1-1/4" #3 #3 100 14N125UFPZ/BULK 2000 14N300UFPZ/UC #14 x 3” #3 100 14N300UFPZ/UC/BULK 700 14N150UFPZ #14 x 1-1/2" #3 #3 100 14N150UFPZ/BULK 1500 Note: Bulk Carton quantities may vary 14N200UFPZ #14 x 2" #3 #3 100 14N200UFPZ/BULK 1000 14N250UFPZ #14 x 2-1/2" #3 #3 100 14N250UFPZ/BULK 1000 14N300UFPZ #14 x 3" #3 #3 100 14N300UFPZ/BULK 1000 14N400UFPZ #14 x 4" #3 #3 100 14N400UFPZ/BULK 500 14N500UFPZ #14 x 5" #3 #3 100 14N500UFPZ/BULK 500 14N600UFPZ #14 x 6" #3 #3 100 14N600UFPZ/BULK 500 Note: Bulk Carton quantities may vary Flat Phillips Head Undercut Self-Drilling Screws Zinc Plated Continous Hinge Installation Screw ITEM CODE SIZE PT. SIZE BOX QTY. ITEM CODE CTN. QTY. 12C68UFLZ #12-24 x 11/16" #2 500 12C68UFLZ/BULK 5000 Oval Phillips Head Self-Drilling Screws Zinc Plated 12C100UFLZ #12-24 x 1" #3 500 12C100UFLZ/BULK 5000 ITEM CODE SIZE PT. SIZE DRIVE SIZE BOX QTY. ITEM CODE CTN. QTY. NOTE: Flat undercut heads are supplied to provide larger usable thread. Head height of undercut is 6N50UOVZ/4HD* #6 x 1/2" #2 #2 500 N/A N/A approximately 2/3 that of standard flat head screws. Drive depths are reduced proportionately. 6N100UOVZ #6 x 1" #2 #2 1000 6N100UOVZ/BULK 10000 6N125UOVZ/4HD #6 x 1-1/4" #2 #2 1000 6N125UOVZ/4HD/BULK 12000 6N125UOVZ #6 x 1-1/4" #2 #2 1000 6N125UOVZ/BULK 12000 8N75UOVZ #8 x 3/4" #2 #2 1000 8N75UOVZ/BULK 10000 8N100UOVZ #8 x 1" #2 #2 1000 8N100UOVZ/BULK 5000 8N125UOVZ #8 x 1-1/4" #2 #2 500 8N125UOVZ/BULK 5000 OvalOval PPhillipshillips Head Self-Drilling Screws Zinc Plated 8N150UOVZ #8 x 1-1/2" #2 #2 500 8N150UOVZ/BULK 5000 10N75UOVZ #10 x 3/4" #2 #3 500 10N75UOVZ/BULK 8000 Door Closer Installation Screw 10N100UOVZ #10 x 1" #2 #3 500 10N100UOVZ/BULK 5000 ITEM CODE SIZE PT. SIZE BOX QTY. ITEM CODE CTN. QTY. 10N125UOVZ #10 x 1-1/4" #2 #3 500 10N125UOVZ/BULK 3000 14C75UOVZ #14-24 x 3/4" #3 500 14C75UOVZ/BULK 4000 10N150UOVZ #10 x 1-1/2" #2 #3 500 10N150UOVZ/BULK 3000 14C100UOVZ #14-24 x 1" #3 500 14C100UOVZ/BULK 3000 14C250UOVZ #14-24 x 2-1/2" #3 100 14C250UOVZ/BULK 1000 4HD = #4 Head *item discontinued when stock depleted Note: Bulk Carton quantities may vary 18 800 456-2658 email: [email protected] www.shoptanner.com 714 Montauk Ave., Brooklyn, NY 11208 718 434-4500 Fax: 718 434-3215 60-01 55th Drive, Maspeth, NY 11378 718 786-2050 Fax: 718 228-7297 800 3rd Ave., Brooklyn, NY 11232 929 337-1821 Fasteners 8_17.qxp_Layout 1 8/18/17 11:56 AM Page 19 SELF-DRILLING SCREWS

SELF-DRILLING SCREWS Globally Sourced Reamers

WaferWafer ThinThin PhillipsPhillips Self-DrillingSelf-Drilling ScrewsScr Tanner Ultra-Guard Coating FlatFlat HeadHead PhillipsPhillips Wood-To-MetalWood To Metal ReamersReamer with Wings ITEM CODE SIZE PT. SIZE DRIVE SIZE BOX QTY. Tanner-Guard Coating 10C75UWAZ/BULK #10-24 x 3/4" #3 #2 7000 ITEM CODE SIZE PT. SIZE DRIVE SIZE BOX QTY. 10C100UWAZ/BULK #10-24 x 1" #3 #2 5000 12C162UWSZ/BULK #12-24 x 1-5/8" #4 #3 3000 10C125UWAZ/BULK #10-24 x 1-1/4" #3 #2 3500 12C200UWSZ/BULK #12-24 x 2" #4 #3 2000 10N150UWAZ/BULK #10 x 1-1/2" #3 #2 3000 12C250UWSZ/BULK #12-24 x 2-1/2" #4 #3 1500 25C275UWSZ/BULK 1/4"-20 x 2-3/4" #4 #3 1000 Wafer head provides flush fit with increased load bearing for added strength. 25C300UWSZ/BULK 1/4"-20 x 3" #4 #3 1000 25C325UWSZ/BULK 1/4"-20 x 3-1/4" #4 #3 900 25C350UWSZ/BULK 1/4"-20 x 3-1/2" #4 #3 900 25C375UWSZ/BULK 1/4"-20 x 3-3/4" #4 #3 500 WaferWafer HeadHead PhillipsPhillips Wood-To-MetalWood-To-Me Reamers w/ Wings Flat Head Phillips Wood-To-Metal Reamers with Wings TannerT Ultra-GuardUl G d CoatingC i Tanner Pro Ultra-Guard Coating ITEM CODE SIZE PT. SIZE DRIVE SIZE BOX QTY. 10C143UWSZ/BULK #10-24 x 1-7/16" #3 #2 4000 12C200UWSQ/BULK #12-24 x 2" #4 #3 2000 12C250UWSQ/BULK #12-24 x 2-1/2" #4 #3 1500 Reamer wings are designed to keep wood from splitting and helps countersink the head. 25C275UWSQ/BULK 1/4"-20 x 2-3/4" #4 #3 1000 Wings ream the hole larger than the threads so the threads will not engage the wood. 25C300UWSQ/BULK 1/4"-20 x 3" #4 #3 1000 WingsWings breakbreak offoff whenwhen theythey hithit thethe steel,steel, thenthen thethe threadsthreads engage,en prevents “Jacking Action”. 25C325UWSQ/BULK 1/4"-20 x 3-1/4" #4 #3 900 25C350UWSQ/BULK 1/4"-20 x 3-1/2" #4 #3 900 25C375UWSQ/BULK 1/4"-20 x 3-3/4" #4 #3 500

Torx Drive Wood-To-Metal Reamers w/Wings BugleBugle HeadHead PPhillipshillips SSelf-Drillingelf Drilling SScrewscrews w/Pilotw/Pilot PointP Tanner Pro Ultra-Guard Coating Tanner-Guard Coating 25C275UWSTQ/BULK 1/4"-20 x 2-3/4" #4 T27 1000 ITEM CODE SIZE PT. SIZE BOX QTY. 25C325UWSTQ/BULK 1/4"-20 x 3-1/4" #4 T27 900 8N1937UBPZ/BULK #8-16 x 1-15/16" #2 5000

Flat Head Combo Phillips/Square Drive Self-Drilling Screws w/Pilot Point- Tanner Ultra-Guard Coating 10N181UPPSZ/BULK #10-16 x 1-13/16" #3 2500 Both above designed for attaching range of wood 1/4” up to 3/4” to 16-8 gauge metal. Wafer Head Phillips Cement Board Self Drilling Screws Tanner-Guard Coating ITEM CODE SIZE PT. SIZE DRIVE SIZE BOX QTY. 8N125UCBWZ/BULK #8 x 1-1/4" #2 #2 5000 LowLow ProfileProfile HeadHead Phillips/SquarePhil Drive Architectural Clip 8N162UCBWZ/BULK #8 x 1-5/8" #2 #2 4000 Screws Tanner-Guard Coating 8N225UCBWZ/BULK #8 x 2-1/4" #2 #2 3000 10N62UACZ #10 x 5/8" #3 7000 10N100UACZ #10 x 1" #3 5000 10N150UACZ #10 x 1-1/2" #3 3000 10N200UACZ #10 x 2" #3 2000 Wafer Head Phillips Fiber Cement Board Self Drilling Screws Tanner-Guard Coating ITEM CODE SIZE PT. SIZE DRIVE SIZE BOX QTY. HexHex WWasherasher HeadHead Self-DrillingSelf-Drillin Screws with Neoprene Bonded 8N125UFCBWZ/BULK #8 x 1-1/4" #2 #2 5000 Sealing Washers #1 Stitch Tanner-Guard Coating 8N162UFCBWZ/BULK #8 x 1-5/8" #2 #2 4000 ITEM CODE SIZE PT. SIZE DRIVE SIZE BOX QTY. 4N87USMBZ #14 x 7/8" #1 5/16” 2500 Designed for panel to panel side lap. 19 www.shoptanner.com email: [email protected] 800 456-2658 714 Montauk Ave., Brooklyn, NY 11208 718 434-4500 Fax: 718 434-3215 60-01 55th Drive, Maspeth, NY 11378 718 786-2050 Fax: 718 228-7297 800 3rd Ave., Brooklyn, NY 11232 929 337-1821 Fasteners 8_17.qxp_Layout 1 8/18/17 11:56 AM Page 20 SELF-DRILLING SCREWS

SELF-DRILLING SCREWS Globally Sourced 18.8 Stainless Steel 18.8 stainless steel self-drilling screws are used for fastening to aluminum when corrosion is a primary concern. NotN designed to drill steel. Providesdes anan exceptionallyexceptionally highhigh levellevel ofof corrosioncorrosion resistance.resistanc FASTENERS

IndentedI d ted HexHex WasherWasher PanPan PhillipsPhillips HeadHead ITEM CODE SIZE BOX QTY. ITEM CODE CTN. QTY. ITEM CODE SIZE BOX QTY. ITEM CODE CTN. QTY. 6N75UHWS #6 x 3/4" 100 6N75UHWS/BULK 5000 6N37UPPS #6 x 3/8" 100 6N37UPPS/BULK 10000 8N50UHWS #8 x 1/2" 100 8N50UHWS/BULK 5000 6N50UPPS #6 x 1/2" 100 6N50UPPS/BULK 5000 8N75UHWS #8 x 3/4" 100 8N75UHWS/BULK 5000 6N75UPPS #6 x 3/4" 100 6N75UPPS/BULK 10000 8N100UHWS #8 x 1" 100 8N100UHWS/BULK 4000 6N100UPPS #6 x 1" 100 6N100UPPS/BULK 10000 8N200UHWS #8 x 2" 100 8N200UHWS/BULK 2000 8N37UPPS #8 x 3/8" 100 8N37UPPS/BULK 10000 10N50UHWS #10 x 1/2" 100 10N50UHWS/BULK 4000 8N50UPPS #8 x 1/2" 100 8N50UPPS/BULK 5000 10N62UHWS #10 x 5/8" 100 10N62UHWS/BULK 6000 8N75UPPS #8 x 3/4" 100 8N75UPPS/BULK 9000 10N75UHWS #10 x 3/4" 100 10N75UHWS/BULK 4000 8N100UPPS #8 x 1" 100 8N100UPPS/BULK 6000 10N100UHWS #10 x 1" 100 10N100UHWS/BULK 3000 8N125UPPS #8 x 1-1/4" 100 8N125UPPS/BULK 5000 10N125UHWS #10 x 1-1/4" 100 10N125UHWS/BULK 2000 8N150UPPS #8 x 1-1/2" 100 8N150UPPS/BULK 4000 10N150UHWS #10 x 1-1/2" 100 10N150UHWS/BULK 3000 8N200UPPS #8 x 2" 100 8N200UPPS/BULK 2000 10N200UHWS #10 x 2" 100 10N200UHWS/BULK 1000 8N250UPPS #8 x 2-1/2" 100 8N250UPPS/BULK 2000 10N250UHWS #10 x 2-1/2" 100 10N250UHWS/BULK 1000 10N50UPPS #10 x 1/2" 100 10N50UPPS/BULK 8000 12N75UHWS #12 x 3/4" 100 12N75UHWS/BULK 3000 10N62UPPS #10 x 5/8" 100 10N62UPPS/BULK 8000 12N100UHWS #12 x 1" 100 12N100UHWS/BULK 2000 10N75UPPS #10 x 3/4" 100 10N75UPPS/BULK 4000 12N125UHWS #12 x 1-1/4" 100 12N125UHWS/BULK 3000 10N100UPPS #10 x 1" 100 10N100UPPS/BULK 5000 12N150UHWS #12 x 1-1/2" 100 12N150UHWS/BULK 2000 10N125UPPS #10 x 1-1/4" 100 10N125UPPS/BULK 4000 12N200UHWS #12 x 2" 100 12N200UHWS/BULK 2000 10N150UPPS #10 x 1-1/2 100 10N150UPPS/BULK 3000 12N300UHWS #12 x 3" 100 12N300UHWS/BULK 1000 10N200UPPS #10 x 2" 100 10N200UPPS/BULK 3000 12N400UHWS #12 x 4" 100 12N400UHWS/BULK 500 10N250UPPS #10 x 2-1/2" 100 10N250UPPS/BULK 2000 14N75UHWS #14 x 3/4" 100 14N75UHWS/BULK 3000 12N75UPPS #12 x 3/4" 100 12N75UPPS/BULK 5000 14N100UHWS #14 x 1" 100 14N100UHWS/BULK 2000 12N100UPPS #12 x 1" 100 12N100UPPS/BULK 3000 14N125UHWS #14 x 1-1/4" 100 14N125UHWS/BULK 1500 12N125UPPS #12 x 1-1/4" 100 12N125UPPS/BULK 3000 14N150UHWS #14 x1-1/2" 100 14N150UHWS/BULK 1250 12N150UPPS #12 x 1-1/2" 100 12N150UPPS/BULK 2000 14N200UHWS #14 x 2" 100 14N200UHWS/BULK 900 12N200UPPS #12 x 2" 100 12N200UPPS/BULK 1000 14N250UHWS #14 x 2-1/2" 100 14N250UHWS/BULK 800 14N75UPPS #14 x 3/4" 100 14N75UPPS/BULK 3000 14N300UHWS #14 x 3" 100 14N300UHWS/BULK 800 14N100UPPS #14 x 1" 100 14N100UPPS/BULK 2000 14N400UHWS #14 x 4" 100 14N400UHWS/BULK 500 14N125UPPS #14 x 1-1/4" 100 14N125UPPS/BULK 1000 14N600UHWS #14 x 6" 100 14N600UHWS/BULK 400 14N150UPPS #14 x 1-1/2" 100 14N150UPPS/BULK 1000 31N75UHWS 5/16” x 3/4" 100 31N75UHWS/BULK 1000 • #6 x 3/4" through #10 x 1/2" #2 point, all others #3 point 31N100UHWS 5/16” x 1" 100 31N100UHWS/BULK 1000 31N150UHWS 5/16” x 1-1/2" 100 31N150UHWS/BULK 600 37N100UHWS 3/8” x 1" 100 37N100UHWS/BULK 750

• #6 x 3/4" through #10 x 1/2" #2 point, all others #3 point

Ovall PPhillipshilli HHeadd ITEM CODE SIZE CTN. QTY. 6N50UOVS/BULK #6 x 1/2" 5000 6N62UOVS/BULK #6 x 5/8" 5000 6N75UOVS/BULK #6 x 3/4" 5000 FlatFl t UndercutU d t PhillipsPhilli HeadH 6N100UOVS/BULK #6 x 1" 4500 6N125UOVS/BULK #6 x 1-1/4" 4000 ITEM CODE SIZE BOX QTY. ITEM CODE CTN. QTY. 8N50UOVS/BULK #8 x 1/2" 5000 10N50UFPS/UC #10 x 1/2" 100 10N50UFPS/UC/BULK 4000 8N75UOVS/BULK #8 x 3/4" 5000 • #2 point 8N100UOVS/BULK #8 x 1" 3500 8N125UOVS/BULK #8 x 1-1/4" 2500 8N150UOVS/BULK #8 x 1-1/2" 2000 8N200UOVS/BULK #8 x 2" 1250 10N75UOVS/BULK #10 x 3/4" 3500 10N100UOVS/BULK #10 x 1" 2500 10N125UOVS/BULK #10 x 1-1/4" 2000 14N100UOVS/BULK #14 x 1" 1500 • #6 x 1/2" through #10 x 1/2" #2 point, all others #3 point 20 800 456-2658 email: [email protected] www.shoptanner.com 714 Montauk Ave., Brooklyn, NY 11208 718 434-4500 Fax: 718 434-3215 60-01 55th Drive, Maspeth, NY 11378 718 786-2050 Fax: 718 228-7297 800 3rd Ave., Brooklyn, NY 11232 929 337-1821 Fasteners 8_17.qxp_Layout 1 8/18/17 11:56 AM Page 21 SELF-DRILLING SCREWS

SELF-DRILLING SCREWS Globally Sourced

410 Stainless Steel Tanner stocks a full line of 410 stainless steel self-drilling screws in hex washer, reduces corrosion resistance. 410 Stainless Steel is magnetic, contains no pan and flat phillips head. Available with ClimaShield™ corrosion protection or nickel, loses toughness in very cold temperatures, and may have a tendency to a bright hardened finish, 410 stainless steel self-drilling screws should be used become brittle. Its corrosion resistance is not as good as austenitic ("18-8 "or when strength and corrosion resistance are factors. 300 series) stainless steel and are therefore recommended in mild atmospheres. Type 410 martensitic stainless steel permits strength propertiesroughly Type 410 stainless steel should be considered a prime candidate for use in equivalent to those of medium carbon steel SAE Grade 5 fasteners. These any application where zinc plated case hardened steel fasteners are deficient properties are attained as this grade of stainless steel has a carbon content in providing the needed corrosion protection. They are not recommended for that allows a sharp increase in tensile strength after heat treating and also fastening dissimilar metals such as aluminum to steel or stainless steel.

Hex Washer Head Self-Drilling Screws 410 Stainless Steel Hex Washer Head Self-Drilling Screws w/Neoprene Bonded ITEM CODE SIZE PT. SIZE BOX QTY. ITEM CODE SIZE PT. SIZE BOX QTY. Sealing Washers 410 Stainless Steel - Bulk 6N37UHW4 #6 x 3/8” #2 100 10N350UHW4 #10 x 3-1/2” #3 100 ITEM CODE SIZE PT. SIZE DRIVER SIZE BOX QTY. 6N50UHW4 #6 x 1/2” #2 100 10N400UHW4 #10 x 4” #3 100 8N50UHWB4/BULK #8 x 1/2" #2 1/4" 5000 6N62UHW4 #6 x 5/8” #2 100 12N75UHW4 #12 x 3/4” #3 100 8N75UHWB4/BULK #8 x 3/4" #2 1/4" 3500 6N75UHW4 #6 x 3/4” #2 100 12N100UHW4 #12 x 1” #3 100 8N100UHWB4/BULK #8 x 1" #2 1/4" 3500 6N100UHW4 #6 x 1” #2 100 12N125UHW4 #12 x 1-1/4” #3 100 10N50UHWB4/BULK #10 x 1/2" #2 5/16" 5000 6N125UHW4 #6 x 1-1/4” #2 100 12N150UHW4 #12 x 1-1/2” #3 100 10N75UHWB4/BULK #10 x 3/4" #3 5/16" 5000 6N150UHW4 #6 x 1-1/2" #2 100 12N175UHW4 #12 x 1-3/4” #3 100 10N100UHWB4/BULK #10 x 1" #3 5/16" 4000 8N37UHW4 #8 x 3/8” #2 100 12N200UHW4 #12 x 2” #3 100 10N150UHWB4/BULK #10 x 1-1/2" #3 5/16" 3000 8N50UHW4 #8 x 1/2” #2 100 12N250UHW4 #12 x 2-1/2” #3 100 10N200UHWB4/BULK #10 x 2" #3 5/16" 2000 8N62UHW4 #8 x 5/8” #2 100 12N300UHW4 #12 x 3” #3 100 10N300UHWB4/BULK #10 x 3" #3 5/16" 1000 8N75UHW4 #8 x 3/4” #2 100 12N400UHW4 #12 x 4” #3 100 12N75UHWB4/BULK #12 x 3/4" #3 5/16" 3000 8N100UHW4 #8 x 1” #2 100 14N75UHW4 #14 x 3/4” #3 100 12N100UHWB4/BULK #12 x 1" #3 5/16" 2500 8N125UHW4 #8 x 1-1/4” #2 100 14N100UHW4 #14 x 1” #3 100 12N125UHWB4/BULK #12 x 1-1/4" #3 5/16" 2500 8N150UHW4 #8 x 1-1/2” #2 100 14N125UHW4 #14 x 1-1/4” #3 100 12N150UHWB4/BULK #12 x 1-1/2" #3 5/16" 2500 8N175UHW4 #8 x 1-3/4” #2 100 14N150UHW4 #14 x 1-1/2” #3 100 12N200UHWB4/BULK #12 x 2" #3 5/16" 1500 8N200UHW4 #8 x 2” #2 100 14N175UHW4 #14 x 1-3/4” #3 100 12N300UHWB4/BULK #12 x 3" #3 5/16" 1000 10N50UHW4 #10 x 1/2” #2 100 14N200UHW4 #14 x 2” #3 100 14N75UHWB4/BULK #14 x 3/4" #3 3/8" 2500 10N62UHW4 #10 x 5/8” #2 100 14N250UHW4 #14 x 2-1/2” #3 100 14N100UHWB4/BULK #14 x 1" #3 3/8" 2500 14N125UHWB4/BULK #14 x 1-1/4" #3 3/8" 2000 10N75UHW4 #10 x 3/4” #3 100 14N300UHW4 #14 x 3” #3 100 14N150UHWB4/BULK #14 x 1-1/2" #3 3/8" 1500 10N100UHW4 #10 x 1” #3 100 14N350UHW4 #14 x 3-1/2” #3 100 14N200UHWB4/BULK #14 x 2" #3 3/8" 1500 10N125UHW4 #10 x 1-1/4“ #3 100 14N400UHW4 #14 x 4” #3 100 14N300UHWB4/BULK #14 x 3" #3 3/8" 1000 10N150UHW4 #10 x 1-1/2” #3 100 14N500UHW4 #14 x 5" #3 100 14N400UHWB4/BULK #14 x 4" #3 3/8" 500 10N175UHW4 #10 x 1-3/4” #3 100 14N600UHW4 #14 x 6” #3 100 14N500UHWB4/BULK #14 x 5" #3 3/8" 500 10N200UHW4 #10 x 2” #3 100 14N700UHW4 #14 x 7” #3 100 14N600UHWB4/BULK #14 x 6" #3 3/8" 500 10N250UHW4 #10 x 2-1/2” #3 100 14N800UHW4 #14 x 8” #3 100 14N700UHWB4/BULK #14 x 7" #3 3/8" 250 10N300UHW4 #10 x 3" #3 100 14N800UHWB4/BULK #14 x 8" #3 3/8" 250 Hex Washer Head Self-Drilling Screws 410 Stainless Steel - Bulk Modified Truss Wafer Head Phillips Self Drilling Screws ITEM SIZE PT. DRIVER BOX ITEM SIZE PT. DRIVER BOX CODE SIZE SIZE QTY. CODE SIZE SIZE QTY. 410 Stainless Steel - Bulk 8N50UHW4/BULK #8 x 1/2" #2 1/4" 10000 12N200UHW4/BULK #12 x 2" #3 5/16" 1500 ITEM CODE SIZE PT. SIZE DRIVER SIZE BOX QTY. 8N75UHW4/BULK #8 x 3/4" #2 1/4" 10000 12N300UHW4/BULK #12 x 3" #3 5/16" 1000 8N50UML4/BULK #8 x 1/2" #2 #2 10000 8N100UHW4/BULK #8 x 1" #2 1/4" 5000 14N75UHW4/BULK #14 x 3/4" #3 3/8" 2500 8N75UML4/BULK #8 x 3/4" #2 #2 8000 10N50UHW4/BULK #10 x 1/2" #2 5/16" 7500 14N100UHW4/BULK #14 x 1" #3 3/8" 2500 8N100UML4/BULK #8 x 1" #2 #2 5000 8N125UML4/BULK #8 x 1-1/4" #2 #2 5000 10N75UHW4/BULK #10 x 3/4" #3 5/16" 5000 14N125UHW4/BULK #14 x 1-1/4" #3 3/8" 2000 8N162UML4/BULK #8 x 1-5/8" #2 #2 4000 10N100UHW4/BULK #10 x 1" #3 5/16" 5000 14N150UHW4/BULK #14 x 1-1/2" #3 3/8" 2000 10N150UHW4/BULK #10 x 1-1/2" #3 5/16" 3000 14N200UHW4/BULK #14 x 2" #3 3/8" 1500 10N200UHW4/BULK #10 x 2" #3 5/16" 2000 14N300UHW4/BULK #14 x 3" #3 3/8" 1000 10N300UHW4/BULK #10 x 3" #3 5/16" 1000 14N400UHW4/BULK #14 x 4" #3 3/8" 500 12N75UHW4/BULK #12 x 3/4" #3 5/16" 5000 14N500UHW4/BULK #14 x 5" #3 3/8" 500 12N100UHW4/BULK #12 x 1" #3 5/16" 2500 14N600UHW4/BULK #14 x 6" #3 3/8" 500 LowLow ProfileProfile HeadHead Phillips/SquarePhillips/Sq Drive Architectural Clip Screws 12N125UHW4/BULK #12 x 1-1/4" #3 5/16" 2500 14N700UHW4/BULK #14 x 7" #3 3/8" 250 410 Stainless Steel Tanner-Guard Coating 12N150UHW4/BULK #12 x 1-1/2" #3 5/16" 2500 14N800UHW4/BULK #14 x 8" #3 3/8" 250 10N100UAC4 #10 x 1" #3 5000 21 www.shoptanner.com email: [email protected] 800 456-2658 714 Montauk Ave., Brooklyn, NY 11208 718 434-4500 Fax: 718 434-3215 60-01 55th Drive, Maspeth, NY 11378 718 786-2050 Fax: 718 228-7297 800 3rd Ave., Brooklyn, NY 11232 929 337-1821 Fasteners 8_17.qxp_Layout 1 8/18/17 11:56 AM Page 22 SELF-DRILLING SCREWS

SELF-DRILLINGSELF-DR SCREWS Globally Sourced 410410 StainlessSta Steel FASTENERS

FlatFlat PhillipsPhillips HeadHead Self-DrillingSelf-Drilling ScrewsScrews 410410 StainlessSta Steel PanPan PhillipsPhillips HeadHead Self-DrillingSelf-Drilling ScrewsScrews 410410 StainlessStainless Steel ITEM CODE SIZE PT. SIZE BOX QTY. ITEM CODE SIZE PT. SIZE BOX QTY. ITEM CODE SIZE PT. SIZE BOX QTY. ITEM CODE SIZE PT. SIZE BOX QTY. 6N50UFP4 #6 x 1/2“ #2 100 10N300UFP4 #10 x 3” #3 100 6N37UPP4 #6 x 3/8” #2 100 10N250UPP4 #10 x 2-1/2” #3 100 6N75UFP4 #6 x 3/4” #2 100 10N400UFP4 #10 x 4" #3 100 6N50UPP4 #6 x 1/2” #2 100 10N300UPP4 #10 x 3” #3 100 6N100UFP4 #6 x 1” #2 100 12N75UFP4 #12 x 3/4” #3 100 6N62UPP4 #6 x 5/8” #2 100 12N125UPP4 #12 x 1-1/4” #3 100 6N125UFP4 #6 x 1-1/4” #2 100 12N100UFP4 #12 x 1” #3 100 6N75UPP4 #6 x 3/4” #2 100 12N75UPP4 #12 x 3/4” #3 100 6N150UFP4 #6 x 1-1/2” #2 100 12N125UFP4 #12 x 1-1/4” #3 100 6N100UPP4 #6 x 1” #2 100 12N100UPP4 #12 x 1” #3 100 8N50UFP4 #8 x 1/2” #2 100 12N150UFP4 #12 x 1-1/2” #3 100 6N150UPP4 #6 x 1-1/2” #2 100 12N150UPP4 #12 x 1-1/2” #3 100 8N62UFP4 #8 x 5/8” #2 100 12N175UFP4 #12 x 1-3/4" #3 100 8N37UPP4 #8 x 3/8” #2 100 12N200UPP4 #12 x 2” #3 100 8N75UFP4 #8 x 3/4” #2 100 12N200UFP4 #12 x 2" #3 100 8N50UPP4 #8 x 1/2” #2 100 12N250UPP4 #12 x 2-1/2” #3 100 8N100UFP4 #8 x 1” #2 100 12N250UFP4 #12 x 2-1/2” #3 100 8N75UPP4 #8 x 3/4” #2 100 12N300UPP4 #12 x 3” #3 100 8N125UFP4 #8 x 1-1/4” #2 100 12N300UFP4 #12 x 3” #3 100 8N100UPP4 #8 x 1” #2 100 14N75UPP4 #14 x 3/4” #3 100 8N150UFP4 #8 x 1-1/2" #2 100 12N400UFP4 #12 x 4" #3 100 8N125UPP4 #8 x 1-1/4” #2 100 14N100UPP4 #14 x 1” #3 100 8N200UFP4 #8 x 2” #2 100 14N75UFP4 #14 x 3/4” #3 100 8N150UPP4 #8 x 1-1/2” #2 100 14N125UPP4 #14 x 1-1/4” #3 100 10N50UFP4 #10 x 1/2" #2 100 14N100UFP4 #14 x 1” #3 100 8N200UPP4 #8 x 2” #2 100 14N150UPP4 #14 x 1-1/2” #3 100 10N62UFP4 #10 x 5/8” #2 100 14N125UFP4 #14 x 1-1/4” #3 100 10N50UPP4 #10 x 1/2” #2 100 14N175UPP4 #14 x 1-3/4” #3 100 10N75UFP4 #10 x 3/4” #3 100 14N150UFP4 #14 x 1-1/2” #3 100 10N62UPP4 #10 x 5/8” #2 100 14N200UPP4 #14 x 2” #3 100 10N100UFP4 #10 x 1” #3 100 14N175UFP4 #14 x 1-3/4” #3 100 10N75UPP4 #10 x 3/4” #3 100 14N250UPP4 #14 x 2-1/2” #3 100 10N125UFP4 #10 x 1-1/4” #3 100 14N200UFP4 #14 x 2” #3 100 10N100UPP4 #10 x 1” #3 100 14N300UPP4 #14 x 3” #3 100 10N150UFP4 #10 x 1-1/2” #3 100 14N250UFP4 #14 x 2-1/2” #3 100 10N125UPP4 #10 x 1-1/4” #3 100 14N350UPP4 #14 x 3-1/2” #3 100 10N175UFP4 #10 x 1-3/4" #2 100 14N300UFP4 #14 x 3" #3 100 10N150UPP4 #10 x 1-1/2” #3 100 14N400UPP4 #14 x 4” #3 100 10N200UFP4 #10 x 2” #3 100 14N350UFP4 #14 x 3-1/2” #3 100 10N200UPP4 #10 x 2” #3 100 10N250UFP4 #10 x 2-1/2” #3 100 14N400UFP4 #14 x 4” #3 100

FlatFlat UndercutUndercut HeadHead Self-DrillingSelf-Drilling ScrewsScrews 410410 StainlessSt Steel

ITEM CODE SIZE PT. SIZE BOX QTY. ITEM CODE CTN. QTY. 6N50UFP4/UC #6 x 1/2" #2 100 6N50UFP4/UC/BULK 5000 8N75UFP4/UC #8 x 3/4" #2 100 8N75UFP4/UC/BULK 5000 Oval Head Phillips Self-Drilling Screws 410 Stainless Steel 8N100UFP4/UC #8 x 1" #2 100 8N100UFP4/UC/BULK 3500 ITEM CODE SIZE PT. SIZE DRIVER SIZE BOX QTY. 10N75UFP4/UC #10 x 3/4" #3 100 10N75UFP4/UC/BULK 7000 8N100UOV4/BULK #8 x 1" #2 #2 3500 10C100UFP4/UC #10-24 x 1" #3 100 10C100UFP4/UC/BULK 3000 8N125UOV4/BULK #8 x 1-1/4" #2 #2 2500 12N75UFP4/UC #12 x 3/4" #3 100 12N75UFP4/UC/BULK 2500 10N125UOV4/BULK #10 x 1-1/4" #2 #2 2000 12N100UFP4/UC #12 x 1" #3 100 12N100UFP4/UC/BULK 2500 12N150UFP4/UC #12 x 1-1/2" #3 100 12N150UFP4/UC/BULK 1500 14N75UFP4/UC #14 x 3/4" #3 100 14N75UFP4/UC/BULK 2000 14N100UFP4/UC #14 x 1" #3 100 14N100UFP4/UC/BULK 1500

Hex Washer Head Self Drilling Screws 410 Stainless Steel w/Extended Drilling Capacity Hex Washer Head Self-Drilling Screws w/Neoprene Bonded Sealing ITEM CODE SIZE PT. SIZE DRIVER SIZE BOX QTY. Washers #1 Stitch 410 Stainless Steel Tanner-Guard Coating 12C125UHW5/410 12-24 x 1-1/4" #5 #2 2500 ITEM CODE SIZE PT. SIZE DRIVER SIZE BOX QTY. 12C150UHW5/410 12-24 x 1-1/2" #5 #2 2000 14N87USMB4 #14 x 7/8" #1 5/16” 2500

HexHex WasherWasher HeadHead SelfSelf DrillingDrilling ScrewsScrews withw Neoprene Bonded Washer HexHex WWasherasher HHeadead Self-DrillingSelf-D Screws w/Neoprene Bonded Sealing 410 Stainless Steel w/Extended Drilling Capacity Washers #2 Pilot Point 410 Stainless Steel Tanner-Guard Coating 12C125UHWB5/410 12-24 x 1-1/4" #5 5/16” 2500 12N125USMB24 #12 x 1-1/4" #2 5/16” 2500 12C150UHWB5/410 12-24 x 1-1/2" #5 5/16” 2000 22 800 456-2658 email: [email protected] www.shoptanner.com 714 Montauk Ave., Brooklyn, NY 11208 718 434-4500 Fax: 718 434-3215 60-01 55th Drive, Maspeth, NY 11378 718 786-2050 Fax: 718 228-7297 800 3rd Ave., Brooklyn, NY 11232 929 337-1821 Fasteners 8_17.qxp_Layout 1 8/18/17 11:56 AM Page 23 SELF-DRILLING SCREWS

SELF-DRILLING SCREWS Globally Sourced

HexH WasherW h HeadH d Self-DrillingS lf D illi Screws Tanner-Guard White Coating HexHex WasherWasher HeadHead Self-DrillingSelf-Drillin Screws Tanner-Guard Bronze Coating ITEM CODE SIZE PT. SIZE DRIVER SIZE CTN. QTY. ITEM CODE SIZE PT. SIZE DRIVER SIZE CTN. QTY. 8N50UHWW/BULK #8 x 1/2" #2 1/4" 10000 8N50UHWB/BULK #8 x 1/2" #2 1/4" 10000 8N56UHWSW/BULK* #8 x 9/16" #2 1/4" 10000 8N56UHWSB/BULK* #8 x 9/16" #2 1/4" 10000 8N75UHWW/BULK #8 x 3/4" #2 1/4" 10000 8N75UHWB/BULK #8 x 3/4" #2 1/4" 10000 8N100UHWW/BULK #8 x 1" #2 1/4" 7500 8N100UHWB/BULK #8 x 1" #2 1/4" 7500 8N150UHWW/BULK #8 x 1-1/2" #2 1/4" 5000 8N150UHWB/BULK #8 x 1-1/2" #2 1/4" 5000 10N50UHWW/BULK #10 x 1/2" #2 5/16" 10000 10N50UHWB/BULK #10 x 1/2" #2 5/16" 10000 10N75UHWW/BULK #10 x 3/4" #3 5/16" 7000 10N75UHWB/BULK #10 x 3/4" #3 5/16" 7000 10N75UHWSW/BULK* #10 x 3/4" #3 1/4" 7000 10N75UHWSB/BULK* #10 x 3/4" #3 1/4" 7000 10N100UHWW/BULK #10 x 1" #3 5/16" 5000 10N100UHWB/BULK #10 x 1" #3 5/16" 5000 10N150UHWW/BULK #10 x 1-1/2" #3 5/16" 3000 10N150UHWB/BULK #10 x 1-1/2" #3 5/16" 3000 10N200UHWW/BULK #10 x 2" #3 5/16" 2000 10N200UHWB/BULK #10 x 2" #3 5/16" 2000 12N75UHWW/BULK #12 x 3/4" #3 5/16" 5000 12N75UHWB/BULK #12 x 3/4" #3 5/16" 5000 12N75UHWSW/BULK* #12 x 3/4" #3 1/4" 5000 12N75UHWSB/BULK* #12 x 3/4" #3 1/4" 5000 12N100UHWW/BULK #12 x 1" #3 5/16" 3500 12N100UHWB/BULK #12 x 1" #3 5/16" 3500 12N200UHWW/BULK #12 x 2" #3 5/16" 2000 12N200UHWB/BULK #12 x 2" #3 5/16" 2000 14N75UHWW/BULK #14 x 3/4" #3 3/8" 3500 14N75UHWB/BULK #14 x 3/4" #3 3/8" 3500 14N75UHWSW/BULK* #14 x 3/4" #3 1/4" 3500 14N75UHWSB/BULK* #14 x 3/4" #3 1/4" 3500 14N100UHWW/BULK #14 x 1" #3 3/8" 2500 14N100UHWB/BULK #14 x 1" #3 3/8" 2500 14N200UHWW/BULK #14 x 2" #3 3/8" 1500 14N200UHWB/BULK #14 x 2" #3 3/8" 1500 14N300UHWW/BULK #14 x 3" #3 3/8" 1000 14N300UHWB/BULK #14 x 3" #3 3/8" 1000 14N400UHWW/BULK #14 x 4" #3 3/8" 500 14N400UHWB/BULK #14 x 4" #3 3/8" 500 • * with serrations under head • * with serrations under head

HexHex WasherWasher HeadHead Self-DrillingSelf Drilling Screws Tanner Ceramic White Coating HexHex WasherWasher HeadHead Self-DrillingSelf Drilli Screws Tanner Ceramic Bronze Coating ITEM CODE SIZE PT. SIZE DRIVER SIZE CTN. QTY. ITEM CODE SIZE PT. SIZE DRIVER SIZE CTN. QTY. 8N56UHWSWC/BULK* #8 x 9/16" #2 1/4" 10000 8N56UHWSBC/BULK* #8 x 9/16" #2 1/4" 10000 8N75UHWWC/BULK #8 x 3/4" #2 1/4" 10000 8N75UHWBC/BULK #8 x 3/4" #2 1/4" 10000 10N75UHWWC/BULK #10 x 3/4" #3 5/16" 7000 10N75UHWBC/BULK #10 x 3/4" #3 5/16" 7000 10N75UHWSWC/BULK* #10 x 3/4" #3 1/4" 7000 10N75UHWSBC/BULK* #10 x 3/4" #3 1/4" 7000 10N100UHWWC/BULK #10 x 1" #3 5/16" 5000 10N100UHWBC/BULK #10 x 1" #3 5/16" 5000 10N150UHWWC/BULK #10 x 1-1/2" #3 5/16" 3000 10N150UHWBC/BULK #10 x 1-1/2" #3 5/16" 3000 10N200UHWWC/BULK #10 x 2" #3 5/16" 2000 10N200UHWBC/BULK #10 x 2" #3 5/16" 2000 12N75UHWWC/BULK #12 x 3/4" #3 5/16" 5000 12N75UHWBC/BULK #12 x 3/4" #3 5/16" 5000 12N75UHWSWC/BULK* #12 x 3/4" #3 1/4" 5000 12N75UHWSBC/BULK* #12 x 3/4" #3 1/4" 5000 14N75UHWWC/BULK #14 x 3/4" #3 3/8" 3500 14N75UHWBC/BULK #14 x 3/4" #3 3/8" 3500 14N100UHWWC/BULK #14 x 1" #3 3/8" 2500 14N100UHWBC/BULK #14 x 1" #3 3/8" 2500 • * with serrations under head • * with serrations under head

Hex Washer Head Self Drilling Screws with 3/4" OD Aluminum Washer Tanner-Guard Coating ITEM CODE SIZE PT. SIZE DRIVER SIZE CTN. QTY. 8N75UHWAWZ #8 x 3/4" #2 1/4" 3000

23 www.shoptanner.com email: [email protected] 800 456-2658 714 Montauk Ave., Brooklyn, NY 11208 718 434-4500 Fax: 718 434-3215 60-01 55th Drive, Maspeth, NY 11378 718 786-2050 Fax: 718 228-7297 800 3rd Ave., Brooklyn, NY 11232 929 337-1821