ISO Update Supplement to ISOfocus

November 2018

International Standards in process

ISO/CD 4259-4 Petroleum and related products — Precision of measurement methods and results — Part 4: An International Standard is the result of an agreement between Use of Statistical Control Charts to validate 'in- the member bodies of ISO. A first important step towards an Interna- statistical-control' status for the execution of a tional Standard takes the form of a committee draft (CD) - this is cir- standard test method in a single laboratory culated for study within an ISO technical committee. When consensus TC 35 Paints and varnishes has been reached within the technical committee, the document is ISO/DTR Preparation of steel substrates before applica- sent to the Central Secretariat for processing as a draft International 22770 tion of paints and related products — Analytical Standard (DIS). The DIS requires approval by at least 75 % of the colorimetry method to support visual assess- member bodies casting a vote. A confirmation vote is subsequently ment of surface preparation grades carried out on a final draft International Standard (FDIS), the approval criteria remaining the same. TC 41 Pulleys and belts (including veebelts)

ISO/CD 21178 Light conveyor belts — Determination of elec-

trical resistances TC 43 Acoustics ISO/CD Acoustics — Laboratory measurement of the 10848-5 flanking transmission of airborne and impact noise between adjoining rooms — Part 5: Ra- diation efficiencies of building elements CD registered TC 44 Welding and allied processes ISO/CD 4063 Welding and allied processes — Nomenclature of processes and reference numbers Period from 01 October to 31 October 2018 TC 46 Information and documentation These documents are currently under consideration in the technical ISO/CD 690 Information and documentation — Guidelines committee. for bibliographic references and citations to They have been registred at the Central Secretariat. information resources TC 58 Gas cylinders TC 4 Rolling bearings ISO/DTS Gas cylinders — Cylinders and tubes of ISO/DTR Spherical plain bearings — Calculation of the 19016 composite construction — Modal acoustic 20051 load rating factors emission (MAE) testing for periodic inspection and testing TC 12 Quantities and units ISO/CD 23088 Gas cylinders — Periodic inspection and test- ISO/CD Quantities and units — Part 1: General ing of welded steel pressure drums — Capaci- 80000-1 ties up to 1 000 l TC 22 Road vehicles TC 84 Devices for administration of medicinal ISO/CD Road vehicles — Diagnostic communication products and catheters 15765-5 over Controller Area Network (DoCAN) — Part ISO/CD Needle-based injection systems for medical 5: Specification for an in-vehicle network con- 11608-6 use — Requirements and test methods — Part nected to the diagnostic link connector 6: On-body delivery systems ISO/CD TR Road vehicles — Solutions for remote access TC 85 Nuclear energy, nuclear technologies, 23786 to vehicle — Criteria for risk assessment and radiological protection ISO/CD TR Road vehicles — Extended vehicle (ExVe) web ISO/CD 18077 Reload startup physics tests for pressurized 23791 services — Result of the risk assessment on water reactors ISO 20078 series TC 94 Personal safety -- Personal protective TC 23 Tractors and machinery for agriculture equipment and forestry ISO/CD 23616 Cleaning, Maintenance and Repair of Firefight- ISO 3767- Tractors, machinery for agriculture and forestry, ers Personal Protective Equipment 1:2016/CD powered lawn and garden equipment — Sym- Amd 1 bols for operator controls and other displays — TC 102 Iron ore and direct reduced iron Part 1: Common symbols — Amendment 1 ISO/CD 3087 Iron ores — Determination of the moisture ISO 3767- Tractors, machinery for agriculture and forestry, content of a lot 2:2016/CD powered lawn and garden equipment — Sym- TC 106 Dentistry Amd 1 bols for operator controls and other displays — Part 2: Symbols for agricultural tractors and ISO/CD 23450 Dentistry — Intraoral endoscopic camera machinery — Amendment 1 ISO/CD 7494-2 Dentistry — Dental units — Part 2: Air, water, ISO/CD 21876 Machinery for forestry — Saw chain shot pro- suction and wastewater systems tective windows — Test method and perfor- ISO/CD 9680 Dentistry — Operating lights mance criteria ISO/CD Dentistry — Portable dental Equipment for TC 28 Petroleum and related products, fuels 23402-1 use in non-clinical settings — Part 1: General and lubricants from natural or synthetic requirements sources TC 108 Mechanical vibration, shock and condi- tion monitoring

ISO Update, Supplement to ISO Focus -- November 2018 1 ISO/CD Condition monitoring and diagnostics of ISO/CD Automation systems and integration — 13373-4 machines — Vibration condition monitoring 21919-3 Physical device control — Description of the — Part 4: Diagnostic techniques for gas and interfaces between automation and machine — steam turbines with fluid-film bearings Part 3: Control interface TC 114 Horology TC 198 Sterilization of health care products ISO/CD 764 Horology — Magnetic resistant watches ISO/CD TS Sterilization of health care products — Radia- 11137-4 tion — Part 4: Guidance on process control TC 117 Fans ISO/CD Washer-disinfectors — Part 1: General require- ISO/CD Fans — Efficiency classification for fans — Part 15883-1 ments, terms and definitions and tests 12759-6 6: Fan efficiency ratio ISO/CD TS Sterilization of medical devices — Guidance on TC 121 Anaesthetic and respiratory equipment 21387 the requirements for the validation and routine ISO/CD Medical electrical equipment — Part 2-85: processing of ethylene oxide sterilization pro- 80601-2-85 Particular requirements for the basic safety and cesses using parametric release essential performance of cerebral tissue oxime- ISO/CD TS Sterilization of health care products — Com- ter equipment (t-NIRS) 22421 mon requirements for sterilizers forterminal TC 127 Earth-moving machinery sterilization of medical devices in health care facilities ISO/CD 13649 Earth-moving machinery — Fire prevention ISO/CD TS Sterilization of healthcare products — Micro- ISO/DTS Earth-moving machinery and mobile road con- 22456 biological Methods-- Guidance on conducting 15143-3 struction machinery — Worksite data exchange bioburden determinations and tests of sterility — Part 3: Telematics data for tissue-based products TC 130 Graphic technology TC 204 Intelligent transport systems ISO/CD TR Graphic technology — Dry back calculation for ISO/CD Intelligent transport systems — Identifiers — 23805 offset printing process 17419-2 Part 2: Management and operation of registries TC 131 Fluid power systems ISO/CD Intelligent transport systems — Geographic ISO/DTR Hydraulic fluid power — Impact and use of ISO 20524-2 Data Files (GDF) GDF5.1 — Part 2: Map data 22681 11171:2016 µm(b) and µm(c) particle size des- used in automated driving systems, Coopera- ignations on particle count and filter test data tive ITS, and multi-modal transport TC 138 Plastics pipes, fittings and valves for ISO/CD 21202 Intelligent transport systems — Partially the transport of fluids Automated Lane Change Systems (PALS) — Functional / operational requirements and test ISO/CD 6259-2 Thermoplastics pipes — Determination of procedures tensile properties — Part 2: Pipes made of unplasticized poly(vinyl chloride) (PVC-U), ori- TC 206 Fine ceramics ented unplasticized poly(vinyl chloride (PVC-O), ISO/CD 23242 Fine ceramics (advanced ceramics, advanced chlorinated poly (vinyl chloride) (PVC-C) and technical ceramics) — Test method for flexural high-impact poly (vinyl chloride) (PVC-HI) strength of monolithic ceramic thin plates at TC 147 Water quality room temperature by three-point or four-point bending ISO/CD 22066 Water Quality — Determination of available total cyanide — Method using segmented flow TC 221 Geosynthetics injection, in-line ultraviolet Digestion Analysis ISO/CD Geotextiles and geotextile-related products — by gas Diffusion and amperometric detection 12958-1 Determination of water flow capacity in their TC 150 Implants for surgery plane — Part 1: Index test ISO/CD TS Cardiovascular implants and extracorpor- ISO/CD Geotextiles and geotextile-related products — 17137 eal systems — Cardiovascular absorbable 12958-2 Determination of water flow capacity in their implants plane — Part 2: Performance test TC 171 Document management applications TC 238 Solid biofuels ISO/CD Document management — Minimum require- ISO/CD Solid biofuels — Determination of off-gassing 19475-1 ments for the storage of documents — Part 1: 20048-2 and oxygen depletion characteristics — Part Capture 2: Operational method for screening of carbon monoxide off-gassing ISO/CD Document management — Minimum require- 19475-2 ments for the storage of documents — Part 2: TC 261 Additive manufacturing Storage ISO/ASTM CD Additive Manufacturing — Standard Specifi- ISO/CD Document management — Minimum require- 52903-3 cation for Material Extrusion Based Additive 19475-3 ments for the storage of documents — Part 3: Manufacturing of Plastic Materials — Part 3: Disposal Final parts TC 172 Optics and photonics TC 262 Risk management ISO 9022- Optics and photonics — Environmental test ISO/CD 31022 Risk management — Guidelines for the man- 3:2015/CD methods — Part 3: Mechanical stress — agement of legal risk Amd 1 Amendment 1 TC 268 Sustainable cities and communities ISO/CD Integrated optics — Vocabulary — Part 1: ISO/CD 37163 Smart community infrastructures — Guidance 11807-1 Basic terms and symbols on smart transportation for allocation of park- ISO/CD Integrated optics — Vocabulary — Part 2: ing lots in cities 11807-2 Terms used in classification TC 281 Fine bubble technology TC 184 Automation systems and integration ISO/CD Fine bubble technology — General principles ISO/CD Automation systems and integration — 20480-4 for usage and measurement of fine bubbles-- 21919-2 Physical device control — Description of the — Part 4: Terminology related to microbubble interfaces between automation and machine — beds Part 2: Safety interface

2 ISO Update, Supplement to ISO Focus -- November 2018 ISO/DTS Fine bubble technology — Agricultural applica- ISO/DIS 11674 Ships and marine technology — 23016-1 tions — Part 1: Test method for evaluating the Heading control systems growth promotion of hydroponically grown 2019-01-17 lettuce TC 292 Security and resilience (Revision of ISO 11674:2006) ISO/DIS 22152 Ships and marine technology ISO/CD 22392 Security and resilience — Community resilience — Performance requirements — Guidelines for conducting peer reviews for low bio-persistence mineral TC 299 Robotics wool products — Alkaline earth silicate wool ISO/CD 8373 Robots and robotic devices — Vocabulary ISO/DIS 21745 Electronic record books for ships TC 307 Blockchain and distributed ledger — Technical specification and technologies operational requirements 2019-01-03 ISO/CD TR Blockchain and distributed ledger technologies 23455 — Overview of and interactions between smart TC 17 Steel contracts in blockchain and distributed ledger technology systems ISO/DIS 10679 Steel — Cast tool steel

JTC 1 Information technology 2019-01-08 ISO/IEC Information technology — Security techniques 9797-3:2011/ — Message Authentication Codes (MACs) — (Revision of ISO 10679:2010, PDAM 1 Part 3: Mechanisms using a universal hash- ISO 10679:2010/Cor 1:2010) function — Amendment 1 ISO/DIS 22055 Switch and crossing rails ISO/IEC CD Information technology — Big data reference 20547-4 architecture — Part 4: Security and privacy 2019-01-16

ISO/IEC CD Information technology — Radio frequency 18046-2 identification device performance test meth- TC 20 Aircraft and space vehicles ods — Part 2: Test methods for interrogator ISO/DIS Space systems — Safety performance 14620-2 requirements — Part 2: Launch ISO/IEC CD Information technology — Automatic identifica- site operations 2018-12-28 20830 tion and data capture techniques — Han Xin Code bar code symbology specification (Revision of ISO 14620-2:2011) ISO/IEC PDTR Information technology — Concepts and ISO/DIS Space systems — Electrical, 19583-23 usage of metadata — Part 23: Data Element 14621-1 electronic and electromechani- Exchange (DEX) cal (EEE) parts — Part 1: Parts 2018-12-31 ISO/IEC CD Information technology — User interface com- management 20071-11 ponent accessibility — Part 11: Guidance for (Revision of ISO 14621-1:2003) text alternatives for images ISO/DIS Space systems — Electrical, ISO/IEC CD Information technology — Affective computing 14621-2 electronic and electromechani- 30150 user interface — Framework cal (EEE) parts — Part 2: Control 2018-12-31 programme requirements (Revision of ISO 14621-2:2003) ISO/DIS 22137 Space systems — Program man- agement — Test reviews 2018-12-28

ISO/DIS 26872 Space systems — Disposal of satellites operating at geosyn- DIS circulated chronous altitude 2018-12-25

(Revision of ISO 26872:2010) Period from 01 October to 31 October 2018 TC 22 Road vehicles These documents have obtained substantial support within the ap- propriate ISO technical committee. ISO/DIS Road vehicles — Connection in- 19072-1 terface for pyrotechnic devices, They have been submitted to the ISO member bodies for voting by two-way and three-way connec- the date shown. tions — Part 1: Pocket interface * Available in English only definition (Revision of ISO 19072-1:2014) ISO/DIS Road vehicles — Connection in- 19072-2 terface for pyrotechnic devices, Vote two-way and three-way connec- 2019-01-22 terminates tions — Part 2: Test methods

and general performance IIW International Institute of requirements Welding (Revision of ISO 19072-2:2013) ISO/DIS 22688 Brazing — Quality requirements ISO/DIS 20076 Road vehicles — Test methods for brazing of metallic materials and performance requirements 2019-01-17 for voltage class B connectors 2019-01-04

TC 8 Ships and marine TC 28 Petroleum and related technology products, fuels and lu- bricants from natural or synthetic sources

ISO Update, Supplement to ISO Focus -- November 2018 3 ISO/DIS 20846 Petroleum products — Deter- (Revision of ISO 15607:2003, mination of sulfur content of ISO 15607:2003/Cor 1:2005) automotive fuels — Ultraviolet 2018-12-28 ISO/DIS Specification and qualification of fluorescence method 15609-2 welding procedures for metallic (Revision of ISO 20846:2011) materials — Welding procedure 2019-01-15 specification — Part 2: Gas ISO/DIS 20884 Petroleum products — Deter- welding mination of sulfur content of automotive fuels — Wavelength- 2018-12-28 (Revision of ISO 15609-2:2001) dispersive X-ray fluorescence TC 58 Gas cylinders spectrometry ISO Gas cylinders — Acetylene cylin- (Revision of ISO 20884:2011) 10462:2013/ ders — Periodic inspection and TC 29 Small tools DAmd 1 maintenance — Amendment 1 2018-12-25

ISO 1711- Assembly tools for screws and 1:2016/DAmd nuts — Technical specifica- TC 67 Materials, equipment and 1 tions — Part 1: Hand-operated 2018-12-27 offshore structures for pe- wrenches and sockets — troleum, petrochemical and Amendment 1 natural gas industries ISO 1711- Assembly tools for screws and ISO/DIS 3183 Petroleum and natural gas indus- 2:2016/DAmd nuts — Technical specifications tries — Steel pipe for pipeline 1 — Part 2: Machine-operated 2018-12-27 transportation systems 2019-01-18 sockets (impact) — Amend-

ment 1 (Revision of ISO 3183:2012, ISO TC 31 Tyres, rims and valves 3183:2012/Amd 1:2017) ISO/DIS Industrial tyres and rims — Rub- TC 68 Financial services 10499-1 ber solid tyres (metric series) ISO/DIS 23644 Financial instrument global iden- for pneumatic tyre rims — Part 2018-12-25 tifier (FIGI) 1: Designation, dimensions and 2019-01-08 marking

(Revision of ISO 10499-1:1991, ISO 10499-1:1991/Cor 1:1997) TC 69 Applications of statistical ISO/DIS TPMS — Valves performances methods 18885-3 — Part 3: Performances ISO/DIS Sampling procedures for 2018-12-31 2859-2 inspection by attributes — Part 2: Sampling plans indexed by 2019-01-17 TC 34 Food products limited quality (LQ) for isolated lot inspection ISO Microbiology of food and animal (Revision of ISO 2859-2:1985) 7932:2004/ feeding stuffs — Horizontal DAmd 1 method for the enumeration of 2019-01-18 TC 71 Concrete, reinforced presumptive Bacillus cereus — concrete and pre-stressed Colony-count technique at 30 concrete degrees C — Amendment 1: ISO/DIS 21914 Test methods for fibre-reinforced Inclusion of optional tests cementitious composites — ISO/DIS 20588 Animal feeding stuffs Bending moment--curvature 2019-01-21 — Terminology curve by four-point bending test 2018-12-28 ISO/DIS Environmental management for 13315-6 concrete and concrete struc- TC 37 Language and terminology tures — Part 6: Use of concrete structures ISO/DIS 29383 Terminology policies — Develop- ment and implementation TC 76 Transfusion, infusion 2019-01-03 and injection, and blood processing equipment for (Revision of ISO 29383:2010) medical and pharmaceuti- TC 42 Photography cal use ISO/DIS 18937 Imaging materials — Photo- ISO/DIS 28620 Medical devices — Non-elec- graphic reflection prints — trically driven portable infusion Methods for measuring indoor 2019-01-21 devices 2019-01-11 light stability (Revision of ISO 18937:2014) (Revision of ISO 28620:2010) TC 44 Welding and allied TC 107 Metallic and other inorgan- processes ic coatings ISO/DIS Welding — Electron and laser- ISO/DIS 21968 Non-magnetic metallic coatings 13919-1 beam welded joints — Guidance on metallic and non-metallic on quality levels for imperfec- 2019-01-18 basis materials — Measurement 2018-12-31 tions — Part 1: Steel, nickel, of coating thickness — Phase- titanium and their alloys sensitive eddy-current method (Revision of ISO 13919-1:1996) (Revision of ISO 21968:2005) ISO/DIS 15607 Specification and qualification of ISO/DIS 28763 Vitreous and porcelain enam- welding procedures for metallic els — Regenerative, enamelled materials — General rules 2019-01-10 and packed panels for air-gas 2018-12-27 and gas-gas heat exchangers — Specifications

4 ISO Update, Supplement to ISO Focus -- November 2018 (Revision of ISO 28763:2008) TC 160 Glass in building TC 108 Mechanical vibration, ISO/DIS Glass in building — Forced-entry shock and condition 16936-1 security glazing — Part 1: Test monitoring and classification by repetitive 2019-01-18 ISO/DIS Methods for the calibration of ball drop 16063-34 vibration and shock transducers (Revision of ISO 16936-1:2005) — Part 34: Testing of sensitivity TC 163 Thermal performance and at fixed temperatures energy use in the built (Revision of ISO 5347-17:1993) environment TC 112 Vacuum technology ISO/DIS Thermal insulation products — ISO/DIS Vacuum technology — Vocabu- 17738-3 Exterior insulation and finish 3529-1 lary — Part 1: General terms systems — Part 3: Design 2019-01-22 2019-01-09 requirements

ISO/DIS Performance of buildings — (Revision of ISO 3529-1:1981) 21105-1 Building enclosure thermal TC 113 Hydrometry performance verification and 2018-12-27 commissioning — Part 1: Gen- ISO/DIS 25377 Hydrometric uncertainty guid- eral requirements ance (HUG) 2018-12-31 TC 172 Optics and photonics

ISO/DIS Endoscopes — Medical endo- (Revision of ISO/TS 25377:2007) 8600-3 scopes and endotherapy devices TC 126 Tobacco and tobacco — Part 3: Determination of field 2019-01-08 products of view and direction of view of endoscopes with optics ISO/DIS 20193 Analysis of tobacco and tobacco (Revision of ISO 8600-3:1997, products — Determination of ISO 8600-3:1997/Amd 1:2003) the width of the strands of cut 2018-12-27 tobacco TC 173 Assistive products (Revision of ISO 20193:2012) ISO/DIS 21801 General guidelines on cognitive TC 127 Earth-moving machinery accessibility 2019-01-15 ISO/DIS 7096 Earth-moving machinery — Laboratory evaluation of opera- tor seat vibration 2018-12-31 TC 174 Jewellery and precious metals (Revision of ISO 7096:2000) ISO/DIS 9202 Jewellery and precious metals — TC 131 Fluid power systems Fineness of precious metal alloys 2018-12-25 ISO/DIS Pneumatic fluid power — Elec-

10094-1 tro-pneumatic pressure control (Revision of ISO 9202:2014) valves — Part 1: Main character- 2019-01-21 istics to include in the supplier's TC 188 Small craft literature ISO/DIS 10240 Small craft — Owner's manual (Revision of ISO 10094-1:2010) ISO 3601- Fluid power systems — O-rings 2019-01-10 1:2012/DAmd — Part 1: Inside diameters, 1 cross-sections, tolerances and 2019-01-04 (Revision of ISO 10240:2004, designation codes — Amend- ISO 10240:2004/Amd 1:2015) ment 1 ISO/DIS 14945 Small craft — Builder's plate TC 134 Fertilizers, soil conditioners and beneficial substances 2019-01-09

ISO/DIS Fertilizers and liming materials — (Revision of ISO 14945:2004) 14820-3 Sampling and sample prepara- tion — Part 3: Sampling of static ISO/DIS 14946 Small craft — Maximum load capacity TC 135 Non-destructive testing 2019-01-09 ISO/DIS 23243 Non-destructive testing — Terminology — Terms used in (Revision of ISO 14946:2001) ultrasonic testing with phased 2019-01-17 ISO/DIS 11105 Small craft — Ventilation of arrays petrol engine and/or petrol tank TC 147 Water quality compartments (Revision of ISO 11105:1997) ISO/DIS Water quality — Multi-compound 21253-1 class methods — Part 1: Criteria TC 190 Soil quality for the identification of target 2019-01-04 ISO/DIS 21365 Soil quality — Conceptual site compounds by gas and liquid models for potentially contami- chromatography and mass nated sites 2018-12-31 spectrometry ISO/DIS Water quality — Multi-compound TC 199 Safety of machinery 21253-2 class methods — Part 2: Criteria for the quantitative determination 2019-01-04 ISO/DIS 21260 Safety of machinery — Mechani- of organic substances using a cal safety data for physical con- multi-compound class analytical tacts between moving machinery 2018-12-27 method or moving parts of machinery and persons

ISO Update, Supplement to ISO Focus -- November 2018 5 TC 204 Intelligent transport ISO/IEC Information technology — Uni- systems 10646:2017/ versal Coded Character Set DAmd 2 (UCS) — Amendment 2: Nandi- 2019-01-17 ISO/DIS 19082 Intelligent transport systems — nagari, Georgian extension, and Definition of data elements and other characters data frames between roadside 2019-01-11 modules and signal controllers ISO/IEC Information technology — Ab- for cooperative signal control 8824-1:2015/ stract Syntax Notation One DAmd 1 (ASN.1): Specification of basic 2019-01-01 TC 206 Fine ceramics notation — Part 1: — Amend- ISO/DIS 21859 Fine ceramics (advanced ment 1 ceramics, advanced technical ISO/IEC DIS Systems and software engineer- ceramics) — Test method for 2018-12-25 15909-1 ing — High-level Petri nets — plasma resistance of ceramic Part 1: Concepts, definitions and 2018-12-27 components in semiconductor graphical notation manufacturing equipment (Revision of ISO/IEC 15909- TC 210 Quality management and 1:2004, ISO/IEC 15909-1:2004/ corresponding general as- Amd 1:2010) pects for medical devices ISO/IEC/IEEE Systems and software engineer- DIS 16326 ing — Life cycle processes — IEC 62366- Medical devices — Part 1: Ap- Project management 2019-01-17 1:2015/DAmd plication of usability engineering

1 to medical devices — Amend- 2019-01-04 (Revision of ISO/IEC/IEEE ment 1 16326:2009) TC 211 Geographic information/ ISO/IEC/IEEE Systems and software engineer- Geomatics DIS 21841 ing — Taxonomy of systems of ISO/DIS Geographic information — systems 2019-01-22 19150-4 Ontology — Part 4: Service ontology 2018-12-27 ISO/IEC DIS Systems and software engineer- 25030 ing — Systems and software TC 212 Clinical laboratory testing quality requirements and evalua- 2019-01-22 and in vitro diagnostic test tion (SQuaRE) — Quality require- systems ments framework (Revision of ISO/IEC ISO/DIS 15190 Medical laboratories — Require- 25030:2007) ments for safety 2019-01-08 ISO/IEC DIS Information technology — Se- 20085-1 curity techniques — Test tool (Revision of ISO 15190:2003) requirements and test tool 2019-01-17 calibration methods for use TC 214 Elevating work platforms in testing non-invasive attack ISO/DIS 21455 Mobile elevating work platforms mitigation techniques in crypto- — Operator's controls — Actua- graphic modules — Part 1: Test tion, displacement, location and 2019-01-17 tools and techniques method of operation ISO/IEC DIS Information technology — Secu- TC 217 Cosmetics 30111 rity techniques — Vulnerability handling processes ISO/DIS 16217 Cosmetics — Sun protection test (Revision of ISO/IEC methods — Water resistance — 30111:2013) Water immersion procedure 2019-01-15 ISO/IEC DIS Information technology — Digi- 10918-7 tal compression and coding of TC 226 Materials for the produc- continuous-tone still images — 2018-12-28 tion of primary aluminium Part 7: Reference software ISO/DIS 14428 Carbonaceous materials for the ISO/IEC DIS Information technologies — production of aluminium — Cold 19566-5 JPEG Systems — Part 5: JPEG and tepid ramming pastes — Ex- 2019-01-15 Universal Metadata Box Format 2018-12-27 pansion/shrinkage during baking (JUMBF) (Revision of ISO 14428:2005) ISO/IEC DIS Information technologies — ISO/DIS 23028 Aluminium oxide promarily used 19566-6 JPEG systems — Part 6: JPEG for the production of aluminium 360 2018-12-25 — Preparation and storage of 2019-01-01 test samples ISO/IEC DIS Information technology — Multi- TC 269 Railway applications 21000-22 media framework (MPEG-21) — Part 22: User Description 2019-01-04 ISO/DIS Plastic railway sleepers for

12856-2 railway applications (railroad ties) (Revision of ISO/IEC 21000- — Part 2: Products testing 2019-01-17 22:2016, ISO/IEC 21000-

22:2016/Amd 1:2018) JTC 1 Information technology ISO/IEC DIS Information technology — JPEG ISO/IEC DIS Information technology — Smart 21122-2 XS low-latency lightweight image 30146 city ICT indicators coding system — Part 2: Profiles 2018-12-31 2019-01-10 and buffer models

6 ISO Update, Supplement to ISO Focus -- November 2018 ISO/IEC Information technology — High ISO/IEC DIS Information technology — Exten- 23008-1:2017/ efficiency coding and media de- 39794-1 sible biometric data interchange DAmd 3 livery in heterogeneous environ- 2019-01-18 formats — Part 1: Framework 2019-01-11 ments — Part 1: MPEG media transport (MMT) — Amendment ISO/IEC DIS Information technology — Data 3: Immersive media and CDN 30134-6 centres — Key performance in- integration dicators — Part 6: Energy Reuse 2019-01-22 ISO/IEC Information technology — High Factor (ERF) 23008-4/ efficiency coding and media de- ISO/IEC DIS Information technology — Ser- DAmd 1 livery in heterogeneous environ- 2019-01-17 20000-2 vice management — Part 2: ments — Part 4: MMT reference Guidance on the application of 2019-01-15 and conformance software — service management systems Amendment 1 (Revision of ISO/IEC ISO/IEC DIS Information technology — Part 20000-2:2012) 23092-1 1: Transport and storage of ISO/IEC DIS Information technology — Ser- genomic information 2018-12-31 20000-3 vice management — Part 3:

Guidance on scope definition 2019-01-15 ISO/IEC DIS Information technology — and applicability of ISO/IEC 23092-2 Genomic information repre- 20000-1 sentation — Part 2: Coding of 2019-01-10 (Revision of ISO/IEC genomic information 20000-3:2012) ISO/IEC Information technology — JP- 24800-2:2011/ Search — Part 2: Registration, DAmd 2 identification and manage- 2019-01-01 ment of schema and ontology — Amendment 2: Registration procedure of JPOnto ISO/IEC Information technology — JPEG 29199-2:2012/ XR image coding system — Part FDIS circulated DAmd 2 2: Image coding specification — 2019-01-01 Amendment 2: Additional color signal type identifiers Period from 01 October to 31 October 2018 ISO/IEC DIS Information technology — Con- These Final draft International Standards have been submitted to the 19823-21 formance test methods for secu- ISO member bodies for formal approval by the date shown rity service crypto suites — Part 2019-01-04 21: Crypto suite SIMON * Available in English only ISO/IEC DIS Information technology — Con- 19823-22 formance test methods for secu- rity service crypto suites — Part 2019-01-04 Vote 22: Crypto suite SPECK terminates ISO/IEC DIS Information technology — Docu- 19757-3 ment Schema Definition Lan- TC 4 Rolling bearings guages (DSDL) — Part 3: Rule- 2019-01-21 based validation — Schematron ISO/FDIS 5593 Rolling bearings — Vocabulary (Revision of ISO/IEC 19757-3:2016) 2018-12-04

ISO/IEC DIS Information technology for (Revision of ISO 5593:1997, ISO 24751-1 learning, education and training 5593:1997/Amd 1:2007) — AccessForAll framework for 2019-01-17 individualized accessibility — TC 8 Ships and marine Part 1: Framework and registry technology (Revision of ISO/IEC IEC/IEEE FDIS Utility connections in port — Part 24751-1:2008) 80005-1 1: High Voltage Shore Connec- ISO/IEC DIS Information technology — Com- tion (HVSC) Systems — General 2018-12-14 19785-2 mon biometric exchange formats requirements framework — Part 2: Procedures (Revision of ISO/IEC/IEEE for the operation of the biometric 80005-1:2012) registration authority ISO/FDIS Ships and marine technol- (Revision of ISO/IEC 19785- 19636 ogy — General requirements 2:2006, ISO/IEC 19785-2:2006/ for inclinometers used for the 2018-12-04 Amd 1:2010, ISO/IEC 19785- determination of trim and list of 2:2006/Cor 1:2013) LNG carriers ISO/IEC DIS Information technology — TC 10 Technical product 19785-3 Common Biometric Exchange Formats Framework — Part 3: documentation Patron format specifications ISO/FDIS Technical product documenta- (Revision of ISO/IEC 21600 tion (TPD) — General require- 19785-3:2015) ments of mechanical product 2018-12-06 ISO/IEC DIS Information technology — Object digital manuals 30106-4 oriented BioAPI — Part 4: C++ TC 17 Steel implementation

ISO Update, Supplement to ISO Focus -- November 2018 7 ISO/FDIS Non-destructive testing of steel ISO/FDIS Road vehicles — Automotive 10893-6 tubes — Part 6: Radiographic 19642-9 cables — Part 9: Dimensions testing of the weld seam of 2018-11-28 and requirements for 600 V a.c. 2018-12-21 welded steel tubes for the detec- or 900 V d.c. and 1 000 V a.c. tion of imperfections or 1 500 V d.c. round, sheathed, (Revision of ISO 10893-6:2011) screened or unscreened multi or single core copper conductor ISO/FDIS Non-destructive testing of steel cables 10893-7 tubes — Part 7: Digital radio- graphic testing of the weld seam 2018-11-28 ISO/FDIS Road vehicles — Automotive of welded steel tubes for the 19642-10 cables — Part 10: Dimensions detection of imperfections and requirements for 600 V a.c. 2018-12-21 (Revision of ISO 10893-7:2011) or 900 V d.c. and 1 000 V a.c. or 1 500 V d.c. round, sheathed, TC 20 Aircraft and space vehicles screened or unscreened multi or ISO/FDIS Space systems — Magnetic single core aluminium conductor 21494 testing cables 2018-12-21 TC 23 Tractors and machinery for

agriculture and forestry ISO/FDIS Space systems — Re-entry risk 27875 management for unmanned ISO/FDIS Agricultural tractors — Test spacecraft and launch vehicle 2018-12-21 789-6 procedures — Part 6: Centre of orbital stages gravity 2018-12-25 (Revision of ISO 27875:2010, ISO 27875:2010/Amd 1:2016) (Revision of ISO 789-6:1982, ISO 789-6:1982/Amd 1:1996) TC 22 Road vehicles TC 29 Small tools ISO/FDIS Road vehicles — Extended vehi- 20078-1 cle (ExVe) 'web services' ISO/FDIS CVD diamond tools — Part 1: ExVe content 2018-12-13 22180 — Categorization 2018-12-11

ISO/FDIS Road vehicles — Extended vehi- 20078-2 cle (ExVe) 'web services' — Part TC 30 Measurement of fluid flow 2: ExVe access 2018-12-13 in closed conduits ISO/FDIS Measurement of fluid flow in ISO/FDIS Road vehicles — Automotive 14511 closed conduits — Thermal 19642-2 cables — Part 2: Test methods mass flowmeters 2018-12-06 2018-12-21 (Revision of ISO 14511:2001) ISO/FDIS Road vehicles — Automotive TC 34 Food products 19642-3 cables — Part 3: Dimensions ISO/FDIS Cereals — Determination of and requirements for 30 V a.c. 2018-12-21 7971-2 bulk density, called mass per or 60 V d.c. single core copper hectolitre — Part 2: Method of conductor cables traceability for measuring instru- ISO/FDIS Road vehicles — Automotive ca- ments through reference to the 19642-4 bles — Part 4: Dimensions and international standard instrument requirements for 30 V a.c. and 2018-12-21 (Revision of ISO 7971-2:2009) 60 V d.c. single core aluminium ISO/FDIS Cereals — Determination of bulk conductor cables 7971-3 density, called mass per hectoli- ISO/FDIS Road vehicles — Automotive tre — Part 3: Routine method 19642-5 cables — Part 5: Dimensions (Revision of ISO 7971-3:2009) and requirements for 600 V a.c. 2018-12-21 ISO/FDIS Microbiology of the food chain or 900 V d.c. and 1 000 V a.c. or 20976-1 — Requirements and guidelines 1 500 V d.c. single core copper for conducting challenge tests 2018-12-19 conductor cables of food and feed products — ISO/FDIS Road vehicles — Automotive ca- Part 1: Challenge tests to study 19642-6 bles — Part 6: Dimensions and growth potential, lag time and requirements for 600 V a.c. or 2018-12-21 maximum growth rate 900 V d.c. and 1 000 V a.c. or 1 TC 38 Textiles 500 V d.c. single core aluminium conductor cables ISO/FDIS Fibre ropes for offshore station- 18692-2 keeping — Part 2: Polyester ISO/FDIS Road vehicles — Automotive ca- 2018-12-07 19642-7 bles — Part 7: Dimensions and

requirements for 30 V a.c. or 60 2018-12-21 (Revision of ISO 18692:2007) V d.c. round, sheathed, screened or unscreened multi or single TC 43 Acoustics core copper conductor cables ISO/FDIS Acoustics — Hearing protec- ISO/FDIS Road vehicles — Automotive 4869-6 tors — Part 6: Determination of 19642-8 cables — Part 8: Dimensions sound attenuation of active noise and requirements for 30 V a.c. 2018-12-21 reduction earmuffs or 60 V d.c. round, sheathed, ISO/FDIS Characterization of pavement screened or unscreened multi or 13473-1 texture by use of surface profiles single core aluminium conductor — Part 1: Determination of mean 2018-12-19 cables profile depth (Revision of ISO 13473-1:1997)

8 ISO Update, Supplement to ISO Focus -- November 2018 TC 58 Gas cylinders ISO/FDIS Radiological protection — X and 4037-3 gamma reference radiation for ISO/FDIS Gas cylinders — Flexible hoses calibrating dosemeters and dos- 2018-11-29 16964 assemblies — Specification and erate meters and for determining testing 2018-11-30 their response as a function of

photon energy — Part 3: Calibra- (Revision of ISO 16964:2015) tion of area and personal dosem- TC 61 Plastics eters and the measurement of their response as a function of ISO/FDIS Plastics — Polycarbonate (PC) energy and angle of incidence 21305-1 moulding and extrusion materi- (Revision of ISO 4037-3:1999) als — Part 1: Designation system 2018-12-24 and basis for specification ISO/FDIS Radiological protection — X and (Revision of ISO 7391-1:2006) 4037-4 gamma reference radiation for calibrating dosemeters and dos- 2018-11-29 ISO/FDIS Plastics — Polycarbonate (PC) erate meters and for determining 21305-2 moulding and extrusion materi- their response as a function of als — Part 2: Preparation of test 2018-12-24 photon energy — Part 4: Calibra- specimens and determination of tion of area and personal dosem- properties eters in low energy X reference (Revision of ISO 7391-2:2006) radiation fields TC 71 Concrete, reinforced (Revision of ISO 4037-4:2004) concrete and pre-stressed ISO/FDIS Nuclear fuel technology — Dis- concrete 18256-1 solution of plutonium dioxide- ISO/FDIS Environmental management for containing materials — Part 1: 2018-11-30 13315-8 concrete and concrete structures Dissolution of plutonium dioxide — Part 8: Environmental labels 2018-12-07 powders and declarations ISO/FDIS Nuclear fuel technology — Dis- TC 76 Transfusion, infusion 18256-2 solution of plutonium dioxide- and injection, and blood containing materials — Part 2: 2018-11-30 Dissolution of MOX pellets and processing equipment for powders medical and pharmaceuti- cal use TC 91 Surface active agents ISO/FDIS Prefilled syringes — Part 6: ISO/FDIS Surface active agents — Mi- 11040-6 Plastic barrels for injectables and 21703 crobiology — Microbiological sterilized subassembled syringes test methods for liquid hand 2018-12-05 ready for filling dishwashing (Revision of ISO 11040-6:2012) TC 92 Fire safety TC 81 Common names for ISO/FDIS Fire safety engineering — Per- pesticides and other 24679-1 formance of structures in fire — agrochemicals Part 1: General 2018-12-12

ISO/FDIS 257 Pesticides and other agrochemi- (Revision of ISO/TS 24679:2011) cals — Principles for the selec- tion of common names 2018-11-30 TC 107 Metallic and other inorgan- ic coatings (Revision of ISO 257:2004) ISO/FDIS Thermal spraying — Zinc, alu- TC 85 Nuclear energy, nuclear 2063-1 minium and their alloys — Part 1: technologies, and radio- Design considerations and qual- 2019-01-03 logical protection ity requirements for corrosion protection systems ISO/FDIS Radiological protection — X and (Revision of ISO 2063-1:2017) 4037-1 gamma reference radiation for calibrating dosemeters and dos- 2018-11-29 ISO/FDIS Metallic and other inorganic erate meters and for determining 10111 coatings — Measurement of their response as a function of mass per unit area — Review of photon energy — Part 1: Radia- gravimetric and chemical analy- tion characteristics and produc- sis methods tion methods (Revision of ISO 10111:2000) (Revision of ISO 4037-1:1996) TC 112 Vacuum technology ISO/FDIS Radiological protection — X and ISO/FDIS Vacuum technology — Standard 4037-2 gamma reference radiation for 21360-3 methods for measuring vacuum calibrating dosemeters and dos- 2018-11-29 pump performance — Part 3: 2018-12-11 erate meters and for determining Specific parameters for mechan- their response as a function of ical booster vacuum pumps photon energy — Part 2: Dosim- etry for radiation protection over TC 115 Pumps the energy ranges from 8 keV to ISO/ASME Pump system energy 1,3 MeV and 4 MeV to 9 MeV FDIS 14414 assessment (Revision of ISO 4037-2:1997) (Revision of ISO/ASME 14414:2015, ISO/ASME 14414:2015/Amd 1:2016) TC 131 Fluid power systems

ISO Update, Supplement to ISO Focus -- November 2018 9 ISO/FDIS 6150 Pneumatic fluid power — Cylin- ISO 14242- Implants for surgery — Wear of drical quick-action couplings for 3:2009/FDAmd total hip-joint prostheses — Part maximum working pressures of 1 1 3: Loading and displacement 2018-12-08 MPa, 1,6 Mpa, and 2,5 MPa (10 parameters for orbital bearing bar, 16 bar and 25 bar) — Plug type wear testing machines and connecting dimensions, speci- corresponding environmental fications, application guidelines conditions for test — Amend- and testing ment 1 (Revision of ISO 6150:1988) TC 154 Processes, data ele- TC 135 Non-destructive testing ments and documents in ISO/FDIS Non-destructive testing — commerce, industry and 16836 Acoustic emission testing — administration Measurement method for acous- 2018-11-30 ISO/FDIS Date and time — Representa- tic emission signals in concrete 8601-1 tions for information interchange ISO/FDIS Non-destructive testing — — Part 1: Basic rules 16837 Acoustic emission testing — Test (Revision of ISO 8601:2004) method for damage qualification 2018-11-30 ISO/FDIS Date and time — Representa- of reinforced concrete beams 8601-2 tions for information interchange ISO/FDIS Non-destructive testing — — Part 2: Extensions 16838 Acoustic emission testing — Test (Revision of ISO 8601:2004) method for classification of ac- 2018-11-30 TC 165 Timber structures tive cracks in concrete structures ISO/FDIS Bamboo structures — Determi- TC 138 Plastics pipes, fittings and 22157 nation of physical and mechani- valves for the transport of cal properties of bamboo culms 2018-12-07 fluids — Test methods ISO/FDIS Plastics piping systems for (Revision of ISO 22157-1:2004) 11296-7 renovation of underground non- TC 171 Document management pressure drainage and sewerage applications networks — Part 7: Lining with spirally-wound pipes ISO/FDIS 8126 Micrographics — Duplicating (Revision of ISO 11296-7:2011) film, silver, diazo and vesicular — Specifications and measure- 2018-12-05 TC 147 Water quality ment for visual density ISO/FDIS Water quality — Determination of (Revision of ISO 8126:2000) 7027-2 turbidity — Part 2: Semi-quanti- TC 173 Assistive products tative methods for the assess- 2018-12-06 ment of transparency of waters ISO/FDIS Assistive products for blind and (Revision of ISO 7027:1999) 23599 vision-impaired persons — Tac- tile walking surface indicators 2018-12-06 TC 150 Implants for surgery ISO/FDIS Preparation and quality manage- (Revision of ISO 23599:2012) 23500-1 ment of fluids for haemodialysis TC 188 Small craft and related therapies — Part 1: 2018-12-18 General requirements ISO/FDIS Small craft — Craft identification (Revision of ISO 23500:2014) 10087 — Coding system 2018-12-24 ISO/FDIS Preparation and quality manage- 23500-2 ment of fluids for haemodialysis (Revision of ISO 10087:2006) and related therapies — Part 2: Water treatment equipment for TC 199 Safety of machinery haemodialysis applications and ISO/FDIS Safety of machinery — Fire pre- related therapies 19353 vention and fire protection (Revision of ISO 26722:2014) 2018-12-19 ISO/FDIS Preparation and quality manage- 23500-3 ment of fluids for haemodialysis (Revision of ISO 19353:2015) and related therapies — Part 2018-12-14 TC 204 Intelligent transport 3: Water for haemodialysis and systems related therapies (Revision of ISO 13959:2014) ISO/FDIS Transport information and con- 14827-3 trol systems — Data interfaces ISO/FDIS Preparation and quality manage- between centres for transport 2018-11-29 23500-4 ment of fluids for haemodialysis information and control sys- and related therapies — Part 4: 2018-12-14 tems — Part 3: Data interfaces Concentrates for haemodialysis between centres for intelligent and related therapies transport sytems (ITS) using XML (Revision of ISO 13958:2014) (Profile A) ISO/FDIS Preparation and quality manage- TC 216 Footwear 23500-5 ment of fluids for haemodialysis and related therapies — Part 5: 2018-12-14 ISO/FDIS Footwear and footwear compo- Quality of dialysis fluid for hae- 20150 nents — Quantitative challenge modialysis and related therapies test method to assess antifungal 2018-11-27 (Revision of ISO 11663:2014) activity TC 217 Cosmetics ISO/FDIS Cosmetics — Microbiology — 11930 Evaluation of the antimicrobial protection of a cosmetic product

10 ISO Update, Supplement to ISO Focus -- November 2018 (Revision of ISO 11930:2012) ISO/IEC Information technology — Mul- TC 265 Carbon dioxide capture, 23000- timedia application format transportation, and geo- 19:2018/ (MPEG-A) — Part 19: Common 2018-12-10 logical storage FDAmd 2 media application format (CMAF) for segmented media — Amend- ISO/FDIS Carbon dioxide capture, ment 2: XHE-AAC and other 27916 transportation and geological media profiles storage — Carbon dioxide stor- 2018-12-06 age using enhanced oil recovery ISO/IEC FDIS Information technology — MPEG (CO2-EOR) 23001-14 systems technologies — Part 14: Partial file format 2018-12-04 TC 274 Light and lighting ISO/CIE FDIS Light and lighting — Energy per- 20086 formance of lighting in buildings 2018-12-14

TC 301 Energy management and energy savings ISO/FDIS Energy management and energy 50021 savings — General guidelines for selecting energy savings 2018-12-25 Standards published evaluators ISO/FDIS General methods for predicting 50046 energy savings New International Standards published between 01 October and 31 2018-12-03 October 2018

JTC 1 Information technology 1 delayed publication of language version 2 corrected version ISO/IEC FDIS Information technology — Dis- 3 multilingual document 20933 tributed application platforms and services (DAPS) — Frame- 2018-12-10 work for distributed real-time access systems Price (Revision of ISO/IEC group 20933:2016) ISO/IEC Information technology — Uni- PC 287 Chain of custody of wood and 10646:2017/ versal Coded Character Set wood-based products FDAmd 1 (UCS) — Amendment 1: Dogra, 2018-12-04 ISO en Chain of custody of wood and wood- Gunjala Gondi, Makasar, Mede- 38200:2018 fr based products faidrin, Indic Siyaq Numbers and E other characters

ISO/IEC FDIS Information technology — In- 14651 ternational string ordering and PC 305 Sustainable non-sewered sani- comparison — Method for 2018-12-21 tation systems comparing character strings ISO en Non-sewered sanitation systems — and description of the common 30500:2018 fr Prefabricated integrated treatment template tailorable ordering units — General safety and perfor- H (Revision of ISO/IEC mance requirements for design and 14651:2016, ISO/IEC testing 14651:2016/Amd 1:2017) TC 4 Rolling bearings ISO/IEC FDIS IT Security techniques — Entity 9798-3 authentication — Part 3: Mecha- ISO en Rolling bearings — Ceramic bearing nisms using digital signature 2018-12-07 19843:2018 fr balls — Determination of strength by techniques notched ball test E (Revision of ISO/IEC 9798- 3:1998, ISO/IEC 9798-3:1998/ TC 8 Ships and marine technology Amd 1:2010, ISO/IEC 9798- 3:1998/Cor 1:2009, ISO/IEC ISO en Ships and marine technology — Ball 9798-3:1998/Cor 2:2012) 21157:2018 valves for use in low temperature applications — Design and testing C ISO/IEC FDIS Cloud computing — Service requirements 19086-4 level agreement (SLA) frame- work — Part 4: Components of 2018-12-20 ISO en Ships and marine technology — But- security and of protection of PII 21159:2018 terfly valves for use in low tem- perature applications — Design and C ISO/IEC FDIS Information technology — Se- testing requirements 27018 curity techniques — Code of practice for protection of person- 2018-11-29 ISO en Ships and marine technology — ally identifiable information (PII) 19847:2018 Shipboard data servers to share field in public clouds acting as PII data at sea G processors (Revision of ISO/IEC ISO en Ships and marine technology — 27018:2014) 19848:2018 Standard data for shipboard machin- ery and equipment G

ISO Update, Supplement to ISO Focus -- November 2018 11 ISO 8384:2018 fr1 Ships and marine technology — ISO en Tractors and machinery for agricul- Dredgers — Vocabulary 25119-3:2018 fr ture and forestry — Safety-related A parts of control systems — Part 3: G Series development, hardware and software TC 17 Steel ISO en Tractors and machinery for agricul- ISO 4945:2018 en Steel — Determination of nitrogen — 25119-4:2018 fr ture and forestry — Safety-related fr Spectrophotometric method parts of control systems — Part 4: D C Production, operation, modification

and supporting processes ISO fr1 Heat-treatable steels, alloy steels and 683-3:2016 free-cutting steels — Part 3: Case- TC 27 Solid mineral fuels hardening steels E ISO en Solid mineral fuels — Major and 13605:2018 minor elements in coal ash and coke ash — Wavelength dispersive x-ray C ISO fr1 Determination of ferrite content in fluorescence spectrometric method 13520:2015 austenitic stainless steel castings B TC 28 Petroleum and related prod- ucts, fuels and lubricants from ISO en Steels for the reinforcement of con- natural or synthetic sources 15835-1:2018 crete — Reinforcement couplers for ISO en Petroleum products and lubricants — mechanical splices of bars — Part 1: B 22285:2018 Determination of oil separation from Requirements grease — Pressure filtration method B ISO en Steels for the reinforcement of con- 15835-2:2018 crete — Reinforcement couplers for ISO en Petroleum products and lubricants mechanical splices of bars — Part 2: B 22286:2018 - Determination of the dropping Test methods point of grease with an automatic B TC 22 Road vehicles apparatus ISO fr1 Road vehicles — Vehicle to grid com- TC 29 Small tools 15118-3:2015 munication interface — Part 3: Physi- ISO/TS 13399- en Cutting tool data representation and cal and data link layer requirements G 315:2018 exchange — Part 315: Creation and exchange of 3D models — Modelling F ISO fr1 Road vehicles — Standardized ac- of machine operated feed out tools 18541-5:2018 cess to automotive repair and main- ISO en Tools for pressing — Gas springs — tenance information (RMI) — Part 5: F 11901-2:2018 fr Part 2: Specification of accessories Heavy duty specific provision B ISO 7612:2018 en Diesel engines — Base-mounted in-line fuel injection pumps and high- ISO en Tools for pressing — Spring plungers pressure supply pumps for common B 20928:2018 fr with helicoidal compression steel rail fuel injection systems — Mount- spring or gas spring B ing dimensions ISO en Diesel fuel — Assessment of lubricity ISO en Tools for pressing — Heel guidings in 12156-1:2018 fr using the high-frequency reciprocat- 20929:2018 fr large stamping and forming dies ing rig (HFRR) — Part 1: Test method C A

ISO en Road vehicles — Anchorages in vehi- TC 31 Tyres, rims and valves 13216-3:2018 cles and attachments to anchorages for child restraint systems — Part D ISO en Metric series for agricultural, forestry 3: Classification of child restraint 7867-1:2018 fr machines and construction tyres system and space in vehicle — Part 1: Tyre designation, dimen- E sions and marking, and tyre/rim ISO en Road vehicles — Product data ex- coordination 21308-6:2018 change between chassis and body- work manufacturers (BEP) — Part 6: E ISO fr1 TPMS snap-in valves — Part 2: Valve Coding of hook loader bodywork 18885-2:2018 environment A ISO en Road vehicles — Product data 21308-7:2018 exchange between chassis and body work manufacturers (BEP) — Part 7: E TC 33 Refractories Coding of skip loader bodywork ISO fr1 Preparation of silicon carbide and TC 23 Tractors and machinery for 16169:2018 similar materials for analysis by ISO agriculture and forestry 12677 X-ray fluorescence (XRF) — D Fused cast-bead method ISO 7112:2018 en Machinery for forestry — Portable fr brush-cutters and grass-trimmers TC 34 Food products — Vocabulary A ISO fr1 Milk, milk products, infant formula 21422:2018 and adult nutritionals — Determina- ISO en Tractors and machinery for agricul- tion of chloride — Potentiometric C 25119-1:2018 fr ture and forestry — Safety-related titration method parts of control systems — Part 1: D ISO fr1 Animal and vegetable fats and oils General principles for design and 18363-2:2018 — Determination of fatty-acid-bound development chloropropanediols (MCPDs) and D ISO en Tractors and machinery for agricul- glycidol by GC/MS — Part 2: Method 25119-2:2018 fr ture and forestry — Safety-related using slow alkaline transesterifica- parts of control systems — Part 2: F tion and measurement for 2-MCPD, Concept phase 3-MCPD and glycidol

12 ISO Update, Supplement to ISO Focus -- November 2018 ISO fr1 Vegetable fats and oils — Determina- ISO en Welding — Micro joining of 2nd gen- 28198:2018 tion of toluene insoluble matter 17279-1:2018 fr eration high temperature supercon- B ductors — Part 1: General require- F ments for the procedure ISO fr1 Sensory analysis — Methodology ISO en Welding — Micro joining of 2nd gen- 11136:2014 — General guidance for conducting 17279-2:2018 fr eration high temperature supercon- hedonic tests with consumers in a F ductors — Part 2: Qualification for D controlled area welding and testing personnel TC 35 Paints and varnishes TC 45 Rubber and rubber products ISO en Binders for paints and varnishes — ISO en Rubber hoses and hose assemblies 4629-3:2018 Determination of hydroxyl value — 11425:2018 for automobile power-steering sys- Part 3: Rapid test A tems — Specification B

ISO en Paints and varnishes — Determina- ISO fr2 Rubber — Determination of ash — 4623-1:2018 fr tion of resistance to filiform corrosion 247-1:2018 Part 1: Combustion method — Part 1: Steel substrates B B

ISO en Preparation of steel substrates before ISO en Rubber, vulcanized or thermoplas- 8504-3:2018 fr application of paints and related 2782-2:2018 fr tic — Determination of permeability products — Surface preparation A to gases — Part 2: Equal-pressure B methods — Part 3: Hand- and power- method tool cleaning ISO 127:2018 fr1 Rubber, natural latex concentrate — TC 38 Textiles Determination of KOH number B ISO en Textiles — Quantitative chemical

1833-6:2018 fr analysis — Part 6: Mixtures of vis- cose, certain types of cupro, modal A ISO fr1 Rubber compounding ingredients — or lyocell with certain other fibres 5794-3:2011 Silica, precipitated, hydrated — Part (method using formic acid and zinc 3: Evaluation procedures in a blend B chloride) of solution styrene-butadiene rubber (S-SBR) and butadiene rubber (BR) ISO fr1 Textiles — Qualitative and quantita- 20418-2:2018 tive proteomic analysis of some ISO 8332:2018 en Rubber compounding ingredients — animal hair fibres — Part 2: Peptide D fr Sulfur — Methods of test detection using MALDI-TOF MS D

ISO en Fibre ropes — Electrostatic surface 20615:2018 potential measuring method ISO en Rubber, raw — Determination C 24698-2:2018 of bound acrylonitrile content in acrylonitrile-butadiene rubber (NBR) B — Part 2: Kjeldahl method ISO 2403:2014 fr1 Textiles — Cotton fibres — Determi- nation of micronaire value ISO en Rubber- or plastics-coated fabrics B 32100:2018 fr — Physical and mechanical tests — Determination of flex resistance by B the flexometer method ISO en Textiles — Cotton yarns — Basis for 10290:2018 specification TC 46 Information and documentation A ISO en Information and documentation —

28560-2:2018 RFID in libraries — Part 2: Encoding ISO en Silk — Test method for determining of RFID data elements based on rules F 21046:2018 the size of silk yarns from ISO/IEC 15962 B TC 60 Gears

ISO/TS fr1 Calculation of load capacity of spur TC 42 Photography 6336-22:2018 and helical gears — Part 22: Calcula- ISO/TR en Imaging materials — Pictorial colour tion of micropitting load capacity F 18945:2018 reflection prints — Comparison of im- age degradation observed between H ISO/TR fr1 Calculation of load capacity of spur ISO 18930 accelerated weathering 6336-31:2018 and helical gears — Part 31: Calcula- test method and outdoor exposure tion examples of micropitting load F TC 43 Acoustics capacity ISO en Acoustics — Hearing protectors — TC 61 Plastics 4869-1:2018 fr Part 1: Subjective method for the ISO 472:2013/ Plastics — Vocabulary — Amend- measurement of sound attenuation C Amd 1:2018 ment 1: Additional items

XZ ISO en Acoustics — Hearing protectors 4869-2:2018 fr — Part 2: Estimation of effective A- ISO en Plastics — Test specimens weighted sound pressure levels when C 20753:2018 fr hearing protectors are worn C TC 44 Welding and allied processes ISO en Non-destructive testing of welds — ISO en Plastics — Compression-moulded 17640:2018 fr Ultrasonic testing — Techniques, 15527:2018 fr sheets of polyethylene (PE-UHMW, testing levels, and assessment E PE-HD) — Requirements and test B methods

ISO Update, Supplement to ISO Focus -- November 2018 13 ISO en Plastics — Polymer polyols for use ISO fr1 Plastic containers for intravenous 21257:2018 in the production of polyurethane 15747:2018 injections — Determination of the residual C C acrylonitrile and styrene monomer content by gas chromatography TC 79 Light metals and their alloys TC 67 Materials, equipment and off- ISO 8993:2018 fr1 Anodizing of aluminium and its alloys shore structures for petroleum, — Rating system for the evaluation of petrochemical and natural gas pitting corrosion — Chart method B industries ISO en Petroleum, petrochemical and natural TC 85 Nuclear energy, nuclear 17782:2018 gas industries — Scheme for con- technologies, and radiological formity assessment of manufacturers G protection of special materials ISO fr1 Quality management systems ISO en Petroleum, petrochemicals and 19443:2018 — Specific requirements for the 18796-1:2018 natural gas industries — Internal application of ISO 9001:2015 by F coating and lining of carbon steel D organizations in the supply chain of process vessels — Part 1: Technical the nuclear energy sector supplying requirements products and services important to ISO en Petroleum, petrochemical and natural nuclear safety (ITNS) 20815:2018 gas industries — Production assur- ISO/TS en Measurement of radioactivity in the ance and reliability management H 11665-12:2018 environment — Air: radon-222 — Part 12: Determination of the diffusion E ISO fr1 Petroleum and natural gas industries coefficient in waterproof materials: 27627:2014 — Aluminium alloy drill pipe thread membrane one-side activity concen- connection gauging D tration measurement method ISO fr1 Essential technical requirements for ISO en Petroleum and natural gas indus- 18229:2018 mechanical components and metallic 15590-1:2018 tries — Induction bends, fittings and structures foreseen for Generation IV E flanges for pipeline transportation E nuclear reactors systems — Part 1: Induction bends TC 87 Cork ISO en Petroleum and natural gas industries ISO 1997:2018 en Granulated cork and cork powder — 21809-1:2018 fr — External coatings for buried or Classification, properties and packing submerged pipelines used in pipeline G A transportation systems — Part 1:

Polyolefin coatings (3-layer PE and 3-layer PP) ISO 2030:2018 en Granulated cork — Size analysis by mechanical sieving ISO en Petroleum and natural gas industries A 11961:2018 — Steel drill pipe

H ISO en Cork stoppers — Determination of 10106:2018 fr global migration ISO fr1 Offshore containers and associ- A 10855-1:2018 ated lifting sets — Part 1: Design,

manufacture and marking of offshore E containers TC 92 Fire safety ISO fr1 Offshore containers and associated ISO en Determination of the resistance to hy- 10855-2:2018 lifting sets — Part 2: Design, manu- 21843:2018 drocarbon pool fires of fire protection facture and marking of lifting sets C materials and systems for pressure F vessels ISO fr1 Offshore containers and associated ISO fr1 Generation and analysis of toxic 10855-3:2018 lifting sets — Part 3: Periodic inspec- 19703:2018 gases in fire — Calculation of spe- tion, examination and testing C cies yields, equivalence ratios and E combustion efficiency in experimen- tal fires ISO en Petroleum and natural gas indus- 35104:2018 tries — Arctic operations — Ice TC 94 Personal safety -- Personal management H protective equipment

ISO 4007:2018 en Personal protective equipment — Eye TC 70 Internal combustion engines fr and face protection — Vocabulary ISO en Reciprocating internal combustion A 8528-5:2018 fr engine driven alternating current generating sets — Part 5: Generat- F ISO en Protective clothing for users of ing sets 11393-2:2018 fr hand-held chainsaws — Part 2: TC 76 Transfusion, infusion and Performance requirements and test D methods for leg protectors injection, and blood process- ing equipment for medical and ISO en Protective clothing for users of pharmaceutical use 11393-4:2018 fr hand-held chainsaws — Part 4: Performance requirements and test D ISO en Pen systems — Part 1: Glass cylin- methods for protective gloves 13926-1:2018 ders for pen-injectors for medical use A ISO en Protective clothing for users of 11393-5:2018 fr hand-held chainsaws — Part 5: Performance requirements and test B methods for protective gaiters

14 ISO Update, Supplement to ISO Focus -- November 2018 ISO en Protective clothing for users of TC 130 Graphic technology 11393-6:2018 fr hand-held chainsaws — Part 6: ISO/TS en Graphic technology — Print quality Performance requirements and test D 15311-2:2018 requirements for printed matter — methods for upper body protectors Part 2: Commercial print applications D ISO 16900- en Respiratory protective devices utilizing digital printing technologies 5:2016/Amd fr — Methods of test and test equip- 1:2018 ment — Part 5: Breathing machine, XZ TC 131 Fluid power systems metabolic simulator, RPD headforms ISO 6099:2018 en Fluid power systems and compo- and torso, tools and verification tools fr nents — Cylinders — Identification — Amendment 1: RPD head forms code for mounting dimensions and G front and side view mounting types TC 106 Dentistry ISO en2 Metallic tube connections for fluid 8434-1:2018 fr2 power and general use — Part 1: 24° ISO 7405:2018 en Dentistry — Evaluation of biocom- cone connectors G fr patibility of medical devices used in

dentistry F ISO/TS fr1 Hydraulic fluid power — Hose as- 17165-2:2018 semblies — Part 2: Practices for TC 108 Mechanical vibration, shock hydraulic hose assemblies D and condition monitoring ISO 2041:2018 en Mechanical vibration, shock and con- ISO 2942:2018 en Hydraulic fluid power — Filter ele- fr dition monitoring — Vocabulary fr ments — Verification of fabrication A integrity and determination of the first B bubble point ISO en Mechanical vibration — Vibration of TC 135 Non-destructive testing 14839-1:2018 rotating machinery equipped with active magnetic bearings — Part 1: A ISO/TS en Non-destructive testing — NDT per- Vocabulary 25108:2018 fr sonnel training organizations D TC 110 Industrial trucks ISO en Industrial trucks — Verification of TC 138 Plastics pipes, fittings and 22915-4:2018 stability — Part 4: Pallet stackers, valves for the transport of double stackers and order-picking B trucks with operator position elevat- fluids ing up to and including 1 200 mm lift ISO en Plastics piping systems for renova- height 11299-1:2018 fr tion of underground gas supply TC 114 Horology networks — Part 1: General C

ISO 6425:2018 en Horology — Divers' watches ISO en Plastics piping systems for renova- fr 11299-2:2018 fr tion of underground gas supply net- B works — Part 2: Lining with continu- B

ous pipes TC 118 Compressors and pneumatic ISO en Plastics piping systems for renova- tools, machines and equipment 11299-3:2018 fr tion of underground gas supply ISO/TR en Dynaload — Design and construction networks — Part 3: Lining with close- C 20571:2018 — Use and maintenance fit pipes E TC 146 Air quality

ISO en Workplace air — Metals and metal- TC 123 Plain bearings 21832:2018 loids in airborne particles — Require- ISO 4379:2018 en Plain bearings — Copper alloy ments for evaluation of measuring F bushes procedures B ISO en Indoor air — Part 36: Standard 16000-36:2018 fr method for assessing the reduction ISO en Plain bearings — Handling of plain rate of culturable airborne bacteria by C 21433:2018 bearings air purifiers using a test chamber B TC 147 Water quality

ISO en Water quality — Determination of or- ISO en Plain bearings — Pad materials for 15681-2:2018 fr thophosphate and total phosphorus 14287:2018 tilting pad bearings contents by flow analysis (FIA and C A CFA) — Part 2: Method by continu-

ous flow analysis (CFA) TC 126 Tobacco and tobacco products ISO en Water quality — Determination of ISO en Cigarettes — Routine analytical 20236:2018 total organic carbon (TOC), dissolved 20778:2018 fr cigarette smoking machine — Defini- organic carbon (DOC), total bound C tions and standard conditions with an D nitrogen (TNb) and dissolved bound intense smoking regime nitrogen (DNb) after high temperature catalytic oxidative combustion ISO en Cigarettes — Generation and collec- 20779:2018 fr tion of total particulate matter using a routine analytical smoking machine C with an intense smoking regime ISO 7210:2018 en Routine analytical cigarette-smoking fr machine — Additional test methods for machine verification B

ISO Update, Supplement to ISO Focus -- November 2018 15 ISO en Water quality — Determination of the ISO fr2 Lasers and laser-related equipment 21676:2018 dissolved fraction of selected active 11990:2018 — Determination of laser resistance pharmaceutical ingredients, transfor- E of tracheal tube shaft and tracheal C mation products and other organic tube cuffs substances in water and treated TC 182 Geotechnics waste water — Method using high performance liquid chromatography ISO en Geotechnical investigation and and mass spectrometric detection 22477-1:2018 fr testing — Testing of geotechnical (HPLC-MS/MS or -HRMS) after direct structures — Part 1: Testing of piles: D injection static compression load testing ISO 8199:2018 en Water quality — General require- TC 184 Automation systems and fr ments and guidance for microbiologi- integration cal examinations by culture G ISO en Data quality — Part 2: Vocabulary

8000-2:2018 ISO en Water quality — Preparation and A 10634:2018 fr treatment of poorly water-soluble or- ganic compounds for the subsequent C ISO en Industrial automation systems and evaluation of their biodegradability in 10303-57:2018 integration — Product data rep- an aqueous medium resentation and exchange — Part F TC 156 Corrosion of metals and alloys 57: Integrated generic resource: ISO fr2 Corrosion of metals and alloys — Persistent identification of elements 16701:2015 Corrosion in artificial atmosphere — in procedural shape modelling Accelerated corrosion test involving C ISO en Industrial automation systems and exposure under controlled conditions 10303-62:2018 integration — Product data represen- of humidity cycling and intermittent tation and exchange — Part 62: Inte- C spraying of a salt solution grated generic resource: Equivalence TC 157 Non-systemic contraceptives validation of product data and STI barrier prophylactics ISO/TR en Automation systems and integra- 22400-10:2018 tion — Key performance indicators ISO en Additional lubricants for male natural (KPIs) for manufacturing operations E 19671:2018 rubber latex condoms — Effect on management — Part 10: Opera- condom strength C tional sequence description of data

acquisition ISO/TR en Guidance on sample handling for TC 189 Ceramic tile 19969:2018 determination of bursting volume and pressure, and testing for freedom B ISO fr1 Ceramic tiles — Part 2: Determination from holes for male condom 10545-2:2018 of dimensions and surface quality C TC 159 Ergonomics ISO en 3-D scanning methodologies for TC 190 Soil quality 20685-1:2018 fr internationally compatible anthropo- metric databases — Part 1: Evalu- D ISO 18400- en Soil quality — Sampling — Part 104: ation protocol for body dimensions 104:2018 fr Strategies extracted from 3-D body scans H

TC 160 Glass in building ISO 18400- en Soil quality — Sampling — Part 202: ISO/TS en Glass in building — Laminated solar 202:2018 fr Preliminary investigations 18178:2018 photovoltaic glass for use in buildings E C

ISO 18400- en Soil quality — Sampling — Part 203: ISO en Glass in building — Vacuum insulat- 203:2018 fr Investigation of potentially contami- 19916-1:2018 fr ing glass — Part 1: Basic specifica- nated sites E tion of products and evaluation meth- E

ods for thermal and sound insulating performance ISO 18400- en Soil quality — Sampling — Part 205: 205:2018 fr Guidance on the procedure for inves- TC 165 Timber structures tigation of natural, near-natural and C ISO 9709:2018 en Structural timber — Visual strength cultivated sites fr grading — Basic principles ISO en Soil quality — Determination of F 23161:2018 fr selected organotin compounds — Gas-chromatographic method F TC 172 Optics and photonics ISO en Optics and photonics — Prepara- ISO 18400- en Soil quality — Sampling — Part 206: 10110-14:2018 fr tion of drawings for optical elements 206:2018 fr Collection, handling and storage and systems — Part 14: Wavefront B of soil under aerobic conditions for B deformation tolerance the assessment of microbiological processes, biomass and diversity in ISO en Optics and photonics — Optical the laboratory 9211-6:2018 coatings — Part 6: Minimum require- ments for reflecting coatings A ISO en Soil quality — Assessment of human 17924:2018 fr exposure from ingestion of soil and soil material — Procedure for the D ISO fr1 Optics and photonics — Opti- estimation of the human bioaccessi- 9211-7:2018 cal coatings — Part 7: Minimum bility/bioavailability of metals in soil requirements for neutral beam splitter A coatings TC 193 Natural gas

16 ISO Update, Supplement to ISO Focus -- November 2018 ISO en Natural gas — Determination of com- ISO en Resilient and laminate floor cover- 6974-3:2018 fr position and associated uncertainty 24343-3:2018 fr ings — Determination of indentation by gas chromatography — Part 3: B and residual indentation — Part 3: A Precision and bias Indentation of resilient semi-flexible/ vinyl composition tiles ISO en Natural gas — Upstream area 20676:2018 fr — Determination of hydrogen TC 228 Tourism and related services sulfide content by laser absorption C ISO fr1 Adventure tourism — Good practices spectroscopy 20611:2018 for sustainability — Requirements TC 197 Hydrogen technologies and recommendations B

ISO en Gaseous hydrogen — Land vehicle 19881:2018 fuel containers TC 229 Nanotechnologies G ISO/TS fr1 Nanotechnologies — Analysis of

21362:2018 nano-objects using asymmetrical- TC 198 Sterilization of health care flow and centrifugal field-flow F products fractionation ISO en Sterilization of health-care products TC 238 Solid biofuels 11135:2014/ fr — Ethylene oxide — Requirements ISO en Solid biofuels — Safety of solid Amd 1:2018 for the development, validation and XZ 20023:2018 fr biofuel pellets — Safe handling and routine control of a sterilization pro- storage of wood pellets in residential F cess for medical devices — Amend- and other small-scale applications ment 1: Revision of Annex E, Single batch release TC 260 Human resource management ISO en Sterilization of health care prod- ISO en Knowledge management systems 25424:2018 fr ucts — Low temperature steam and 30401:2018 fr — Requirements formaldehyde — Requirements for F D development, validation and routine control of a sterilization process for TC 267 Facility management medical devices ISO fr1 Facility management — Management TC 201 Surface chemical analysis 41001:2018 systems — Requirements with guid- ISO en Surface chemical analysis — X- ance for use F 14701:2018 ray photoelectron spectroscopy — Measurement of silicon oxide C TC 269 Railway applications thickness ISO en Railway applications — Calculation of TC 202 Microbeam analysis 20138-1:2018 fr braking performance (stopping, slow- ISO en Microbeam analysis — Methods of ing and stationary braking) — Part G 20720:2018 specimen preparation for analysis 1: General algorithms utilizing mean of general powders using WDS and B value calculation EDS ISO/TR en Railway applications — Railway brak- TC 204 Intelligent transport systems 22131:2018 ing — Country specific applications for ISO 20138-1 D ISO en Electronic fee collection — Applica- 14906:2018 fr tion interface definition for dedicated short-range communication H TC 281 Fine bubble technology ISO en Fine bubble technology — Storage ISO en Intelligent transport systems — ITS 21255:2018 and transportation of ultrafine bubble 24102-1:2018 station management — Part 1: Local dispersion in water A management F TC 282 Water reuse ISO en Intelligent transport systems — ITS ISO en Treated wastewater reuse for irriga- 24102-2:2018 station management — Part 2: Re- 20419:2018 tion — Guidelines for the adaptation mote management of ITS-SCUs F of irrigation systems and practices to F treated wastewater ISO en Intelligent transport systems — ITS ISO en Guidelines for performance evalua- 24102-3:2018 station management — Part 3: Ser- 20468-1:2018 tion of treatment technologies for wa- vice access points G ter reuse systems — Part 1: General D

ISO en Intelligent transport systems — TC 292 Security and resilience 24102-4:2018 ITS station management — Part 4: Station-internal management F ISO en Security and resilience — Emergency communications 22326:2018 management — Guidelines for moni- toring facilities with identified hazards B TC 215 Health informatics 1 ISO/IEEE fr Health informatics — Personal health ISO en Security and resilience — Emergency 11073- device communication — Part 20601: 22327:2018 management — Guidelines for im- 20601:2016 Application profile — Optimized H plementation of a community-based C exchange protocol landslide early warning system TC 219 Floor coverings ISO en Security and resilience — Authentic- ISO en Resilient and laminate floor cover- 22382:2018 ity, integrity and trust for products 24343-2:2018 fr ings — Determination of indentation and documents — Guidelines for E and residual indentation — Part 2: A the content, security, issuance and Short-term indentation and residual examination of excise tax stamps indentation of resilient floor covering

ISO Update, Supplement to ISO Focus -- November 2018 17 IULTCS International Union of Leather ISO/IEC en IT Security techniques — Hash- Technologists and Chemists 10118-3:2018 functions — Part 3: Dedicated Societies hash-functions H

ISO en Leather — Organic fluorine — Part 23702-1:2018 fr 1: Determination of the non-volatile ISO/IEC TS en Guidance for developing security compound content by extraction D 19608:2018 and privacy functional requirements method using liquid chromatography/ based on ISO/IEC 15408 F tandem mass spectrometry detector (LC-MS/MS) ISO/IEC en Information technology — Electronic JTC 1 Information technology 27050-2:2018 discovery — Part 2: Guidance for governance and management of B ISO/IEC/IEEE en Information technology — Tel- electronic discovery 8802-3:2017/ ecommunications and information Amd 6:2018 exchange between systems — Local H ISO/IEC en Information technology — Security and metropolitan area networks — 29147:2018 techniques — Vulnerability disclosure Specific requirements — Part 3: E Standard for Ethernet — Amendment 6: Physical layer specifications and ISO/IEC en Information technology — Multime- management parameters for ethernet 21000-8:2008/ dia framework (MPEG-21) — Part 8: passive optical networks protocol Amd 4:2018 Reference software — Amendment 4: XZ over coax Media value chain ontology exten- ISO/IEC/IEEE en Information technology — Tel- sions on time-segments and multi- 8802-3:2017/ ecommunications and information track audio Amd 8:2018 exchange between systems — Local G ISO/IEC en Information technology — Multimedia and metropolitan area networks — 23000-17:2018 application format (MPEG-A) — Part Specific requirements — Part 3: 17: Multiple sensorial media applica- D Standard for Ethernet — Amendment tion format 8: Physical layer and management ISO/IEC en Information technology — Multimedia parameters for power over data lines 23000- application format (MPEG-A) — Part (PoDL) of single balanced twisted- 19:2018/Amd 19: Common media application for- XZ pair ethernet 1:2018 mat (CMAF) for segmented media — ISO/IEC/IEEE en Information technology — Tel- Amendment 1: SHVC media profile 8802-3:2017/ ecommunications and information and additional audio media profiles Amd 9:2018 exchange between systems — Local H ISO/IEC en Information technology — Dy- and metropolitan area networks — 23009-4:2018 namic adaptive streaming over HTTP Specific requirements — Part 3: (DASH) — Part 4: Segment encryp- E Standard for Ethernet — Amendment tion and authentication 9: Physical layer specifications and management parameters for 1000 ISO/IEC en Information technology — Auto- Mb/s operation over plastic optical 29167-21:2018 matic identification and data capture fiber techniques — Part 21: Crypto suite F SIMON security services for air inter- ISO/IEC/ en Information technology — Tel- face communications IEEE 8802- ecommunications and information 1AE:2013/Amd exchange between systems — Local H 3:2018 and metropolitan area networks — Part 1AE: Media access control (MAC) security — Amendment 3: Ethernet data encryption devices ISO/IEC 8824- en Information technology — Abstract 1:2015/Cor Syntax Notation One (ASN.1): Speci- 3:2018 fication of basic notation — Part 1: free — Technical Corrigendum 3 Standards confirmed ISO/IEC 8825- en Information technology — ASN.1 7:2015/Cor encoding rules — Part 7: Specifica- 4:2018 tion of Octet Encoding Rules (OER) free The following International Standards are confimred for a five year — Technical Corrigendum 4 period: ISO/IEC en Information technology — ASN.1 8825-8:2018 encoding rules — Part 8: Specifica- tion of JavaScript Object Notation E TC 8 Ships and marine technology Encoding Rules (JER) ISO 13122:2011 ISO/IEC/IEEE en Systems and software engineering ISO 22673:2008 (reconfirmed) 24748-1:2018 — Life cycle management — Part 1: Guidelines for life cycle management G ISO 7255:1985 (reconfirmed) TC 10 Technical product documentation ISO/IEC en Information technology — Identifi- ISO/TS 24787:2018 cation cards — On-card biometric 128-71:2010 comparison E TC 17 Steel ISO/IEC en Information technology — Small ISO 683-14:2004 (reconfirmed) 14776- computer system interface (SCSI) ISO 683-15:1992 (reconfirmed) 263:2018 — Part 263: SAS protocol layer - 3 H (SPL-3) TC 22 Road vehicles ISO 2416:1992 (reconfirmed) ISO 2958:1973 (reconfirmed)

18 ISO Update, Supplement to ISO Focus -- November 2018 ISO 3208:1974 (reconfirmed) ISO 1004-2:2013 ISO 4030:1983 (reconfirmed) TC 92 Fire safety ISO 13400-1:2011 ISO 14697:2007 (reconfirmed) ISO 15765-1:2011 ISO 834-6:2000 (reconfirmed) ISO 7440-2:1991 (reconfirmed) ISO 19701:2013 TC 23 Tractors and machinery for agriculture TC 105 Steel wire ropes and forestry ISO 12076:2002 (reconfirmed) ISO 16231-1:2013 TC 110 Industrial trucks ISO 5721-1:2013 ISO 2330:2002 ISO 16236:2013 ISO/TS (reconfirmed) ISO 22866:2005 (reconfirmed) 3691-7:2011 TC 27 Solid mineral fuels ISO 13564-1:2012 ISO 579:2013 ISO 20898:2008 (reconfirmed) ISO 975:2013 TC 113 Hydrometry ISO 5071-1:2013 ISO 4377:2012 ISO 5072:2013 ISO 8333:1985 (reconfirmed) ISO 5073:2013 TC 131 Fluid power systems TC 28 Petroleum and related products, fuels ISO 9974-1:1996 (reconfirmed) and lubricants from natural or synthetic ISO 9974-2:1996 (reconfirmed) sources ISO 9974-3:1996 (reconfirmed) ISO 1516:2002 (reconfirmed) ISO 6263:2013 ISO 1523:2002 (reconfirmed) ISO 7790:2013 ISO 3648:1994 (reconfirmed) ISO 9461:1992 (reconfirmed) ISO 3837:1993 (reconfirmed) ISO 17082:2004 (reconfirmed) ISO 6251:1996 (reconfirmed) ISO 4021:1992 (reconfirmed) ISO 8973:1997 (reconfirmed) ISO 11170:2013 ISO 14596:2007 (reconfirmed) TC 138 Plastics pipes, fittings and valves for TC 29 Small tools the transport of fluids ISO 15637-1:2002 (reconfirmed) ISO 3633:2002 (reconfirmed) ISO 15637-2:2002 (reconfirmed) TC 142 Cleaning equipment for air and other ISO 11415:1997 (reconfirmed) gases ISO 5742:2004 (reconfirmed) ISO 10121-2:2013 ISO 5744:2004 (reconfirmed) TC 146 Air quality ISO 5745:2004 (reconfirmed) ISO 21438-2:2009 ISO 6788:1997 (reconfirmed) TC 150 Implants for surgery ISO 8764-1:2004 (reconfirmed) ISO 5841-3:2013 ISO 8979:2004 (reconfirmed) ISO 11318:2002 (reconfirmed) ISO 9654:2004 (reconfirmed) TC 186 Cutlery and table and decorative metal ISO 9655:2004 (reconfirmed) hollow-ware ISO 9656:2004 (reconfirmed) ISO 4481:1977 (reconfirmed) ISO 9657:2004 (reconfirmed) TC 198 Sterilization of health care products ISO 10914:1996 (reconfirmed) ISO 11137-2:2013 ISO 11168:1995 (reconfirmed) TC 205 Building environment design TC 34 Food products ISO 16484-2:2004 (reconfirmed) ISO 7002:1986 (reconfirmed) TC 207 Environmental management ISO 14470:2011 ISO 14051:2011 ISO 16634-1:2008 (reconfirmed) TC 209 Cleanrooms and associated controlled TC 37 Language and terminology environments ISO 22274:2013 ISO 14644-5:2004 (reconfirmed) TC 43 Acoustics TC 212 Clinical laboratory testing and in vitro ISO 8297:1994 (reconfirmed) diagnostic test systems ISO 15197:2013 ISO 717-1:2013 ISO/TS TC 61 Plastics 17518:2015 ISO 472:2013 TC 218 Timber TC 68 Financial services ISO 631:1975 (reconfirmed) ISO 1004-1:2013

ISO Update, Supplement to ISO Focus -- November 2018 19 ISO 1072:1975 (reconfirmed) ISO 4251-4:2010 (replaced by ) ISO 2036:1976 (reconfirmed) TC 70 Internal combustion engines ISO 2299:1973 (reconfirmed) ISO/TS (replaced by ) ISO 2301:1973 (reconfirmed) 23556:2007 ISO 5326:1978 (reconfirmed) TC 72 Textile machinery and accessories ISO 5327:1978 (reconfirmed) ISO 7506:1984 (replaced by ) ISO 5328:1978 (reconfirmed) TC 83 Sports and other recreational facilities and equipment ISO 5329:1978 (reconfirmed) ISO 378:1980 (replaced by ) ISO 8904:1990 (reconfirmed) ISO 379:1980 (replaced by ) ISO 8905:1988 (reconfirmed) TC 106 Dentistry TC 227 Springs ISO/TS (replaced by ISO 7405:2018) ISO 2162-2:1993 (reconfirmed) 22911:2016 TC 256 Pigments, dyestuffs and extenders TC 121 Anaesthetic and respiratory equipment ISO 510:1977 (reconfirmed) ISO 5358:1992 (replaced by ) ISO 4620:1986 (reconfirmed) TC 135 Non-destructive testing ISO 6503:1984 (reconfirmed) ISO/TR (replaced by ISO/TS 25108:2018) ISO 6713:1984 (reconfirmed) 25108:2006 ISO 7252:1984 (reconfirmed) TC 159 Ergonomics TC 268 Sustainable cities and communities ISO 20685:2010 (replaced by ISO 20685-1:2018) ISO/TS ISO 9241-16:1999 (replaced by ) 37151:2015 ISO (replaced by ) TMBG Technical Management Board - groups 9241-151:2008 ISO 10377:2013 TC 179 Masonry JTC 1 Information technology ISO 9652-4:2000 (replaced by ) ISO/IEC TR ISO 9652-5:2000 (replaced by ) 14516:2002 TC 190 Soil quality ISO/IEC TR ISO 10381-1:2002 (replaced by ISO 18400-107:2017, ISO 18400- 29149:2012 101:2017, ISO 18400-104:2018) ISO/IEC ISO 10381-4:2003 (replaced by ISO 18400-104:2018, ISO 18400- 29192-4:2013 202:2018, ISO 18400-205:2018) ISO/IEC ISO 10381-5:2005 (replaced by ISO 18400-104:2018, ISO 18400- 24769-2:2013 202:2018, ISO 18400-203:2018) ISO/IEC TS ISO 10381-8:2006 (replaced by ISO 18400-104:2018) 30135-1:2014 ISO 10381-6:2009 (replaced by ISO 18400-105:2017, ISO ISO/IEC TS 18400-102:2017, ISO 18400-104:2018, ISO 30135-2:2014 18400-206:2018) ISO/IEC TS ISO/TS (replaced by ISO 17924:2018) 30135-3:2014 17924:2007 ISO/IEC TS 30135-4:2014 JTC 1 Information technology ISO/IEC TS ISO/IEC TS (replaced by ISO/IEC/IEEE 24748-1:2018) 30135-5:2014 24748-1:2016 ISO/IEC TS ISO 1861:1975 (replaced by ) 30135-6:2014 ISO 4057:1986 (replaced by ) ISO/IEC TS ISO 8063-1:1986 (replaced by ) 30135-7:2014 ISO 8063-2:1986 (replaced by )

ISO 8378-2:1986 (replaced by ) ISO 8462-1:1986 (replaced by ) ISO 8462-2:1986 (replaced by ) ISO 8630-2:1987 (replaced by ) ISO 2132:1972 (replaced by ) Standards withdrawn ISO 2133:1976 (replaced by ) ISO 3066:1986 (replaced by ) ISO 4232-2:1980 (replaced by ) Period from 01 October to 31 October 2018 ISO 4232-3:1984 (replaced by )

TC 27 Solid mineral fuels ISO 5138-1:1978 (replaced by ) ISO 5138-2:1980 (replaced by ) ISO/TS (replaced by ISO 13605:2018) 13605:2012 ISO 5138-3:1981 (replaced by ) TC 31 Tyres, rims and valves ISO 5138-4:1981 (replaced by )

20 ISO Update, Supplement to ISO Focus -- November 2018 ISO 5138-5:1981 (replaced by ) ISO 5138-7:1986 (replaced by ) ISO 5138-9:1984 (replaced by )

Meeting calendar

The meeting calendar is available at https://www.iso.org/meeting-calendar.html

ISO Update, Supplement to ISO Focus -- November 2018 21