ISO Update Supplement to ISOfocus November 2018 International Standards in process ISO/CD 4259-4 Petroleum and related products — Precision of measurement methods and results — Part 4: An International Standard is the result of an agreement between Use of Statistical Control Charts to validate 'in- the member bodies of ISO. A first important step towards an Interna- statistical-control' status for the execution of a tional Standard takes the form of a committee draft (CD) - this is cir- standard test method in a single laboratory culated for study within an ISO technical committee. When consensus TC 35 Paints and varnishes has been reached within the technical committee, the document is ISO/DTR Preparation of steel substrates before applica- sent to the Central Secretariat for processing as a draft International 22770 tion of paints and related products — Analytical Standard (DIS). The DIS requires approval by at least 75 % of the colorimetry method to support visual assess- member bodies casting a vote. A confirmation vote is subsequently ment of surface preparation grades carried out on a final draft International Standard (FDIS), the approval criteria remaining the same. TC 41 Pulleys and belts (including veebelts) ISO/CD 21178 Light conveyor belts — Determination of elec- trical resistances TC 43 Acoustics ISO/CD Acoustics — Laboratory measurement of the 10848-5 flanking transmission of airborne and impact noise between adjoining rooms — Part 5: Ra- diation efficiencies of building elements CD registered TC 44 Welding and allied processes ISO/CD 4063 Welding and allied processes — Nomenclature of processes and reference numbers Period from 01 October to 31 October 2018 TC 46 Information and documentation These documents are currently under consideration in the technical ISO/CD 690 Information and documentation — Guidelines committee. for bibliographic references and citations to They have been registred at the Central Secretariat. information resources TC 58 Gas cylinders TC 4 Rolling bearings ISO/DTS Gas cylinders — Cylinders and tubes of ISO/DTR Spherical plain bearings — Calculation of the 19016 composite construction — Modal acoustic 20051 load rating factors emission (MAE) testing for periodic inspection and testing TC 12 Quantities and units ISO/CD 23088 Gas cylinders — Periodic inspection and test- ISO/CD Quantities and units — Part 1: General ing of welded steel pressure drums — Capaci- 80000-1 ties up to 1 000 l TC 22 Road vehicles TC 84 Devices for administration of medicinal ISO/CD Road vehicles — Diagnostic communication products and catheters 15765-5 over Controller Area Network (DoCAN) — Part ISO/CD Needle-based injection systems for medical 5: Specification for an in-vehicle network con- 11608-6 use — Requirements and test methods — Part nected to the diagnostic link connector 6: On-body delivery systems ISO/CD TR Road vehicles — Solutions for remote access TC 85 Nuclear energy, nuclear technologies, 23786 to vehicle — Criteria for risk assessment and radiological protection ISO/CD TR Road vehicles — Extended vehicle (ExVe) web ISO/CD 18077 Reload startup physics tests for pressurized 23791 services — Result of the risk assessment on water reactors ISO 20078 series TC 94 Personal safety -- Personal protective TC 23 Tractors and machinery for agriculture equipment and forestry ISO/CD 23616 Cleaning, Maintenance and Repair of Firefight- ISO 3767- Tractors, machinery for agriculture and forestry, ers Personal Protective Equipment 1:2016/CD powered lawn and garden equipment — Sym- Amd 1 bols for operator controls and other displays — TC 102 Iron ore and direct reduced iron Part 1: Common symbols — Amendment 1 ISO/CD 3087 Iron ores — Determination of the moisture ISO 3767- Tractors, machinery for agriculture and forestry, content of a lot 2:2016/CD powered lawn and garden equipment — Sym- TC 106 Dentistry Amd 1 bols for operator controls and other displays — Part 2: Symbols for agricultural tractors and ISO/CD 23450 Dentistry — Intraoral endoscopic camera machinery — Amendment 1 ISO/CD 7494-2 Dentistry — Dental units — Part 2: Air, water, ISO/CD 21876 Machinery for forestry — Saw chain shot pro- suction and wastewater systems tective windows — Test method and perfor- ISO/CD 9680 Dentistry — Operating lights mance criteria ISO/CD Dentistry — Portable dental Equipment for TC 28 Petroleum and related products, fuels 23402-1 use in non-clinical settings — Part 1: General and lubricants from natural or synthetic requirements sources TC 108 Mechanical vibration, shock and condi- tion monitoring ISO Update, Supplement to ISO Focus -- November 2018 1 ISO/CD Condition monitoring and diagnostics of ISO/CD Automation systems and integration — 13373-4 machines — Vibration condition monitoring 21919-3 Physical device control — Description of the — Part 4: Diagnostic techniques for gas and interfaces between automation and machine — steam turbines with fluid-film bearings Part 3: Control interface TC 114 Horology TC 198 Sterilization of health care products ISO/CD 764 Horology — Magnetic resistant watches ISO/CD TS Sterilization of health care products — Radia- 11137-4 tion — Part 4: Guidance on process control TC 117 Fans ISO/CD Washer-disinfectors — Part 1: General require- ISO/CD Fans — Efficiency classification for fans — Part 15883-1 ments, terms and definitions and tests 12759-6 6: Fan efficiency ratio ISO/CD TS Sterilization of medical devices — Guidance on TC 121 Anaesthetic and respiratory equipment 21387 the requirements for the validation and routine ISO/CD Medical electrical equipment — Part 2-85: processing of ethylene oxide sterilization pro- 80601-2-85 Particular requirements for the basic safety and cesses using parametric release essential performance of cerebral tissue oxime- ISO/CD TS Sterilization of health care products — Com- ter equipment (t-NIRS) 22421 mon requirements for sterilizers forterminal TC 127 Earth-moving machinery sterilization of medical devices in health care facilities ISO/CD 13649 Earth-moving machinery — Fire prevention ISO/CD TS Sterilization of healthcare products — Micro- ISO/DTS Earth-moving machinery and mobile road con- 22456 biological Methods-- Guidance on conducting 15143-3 struction machinery — Worksite data exchange bioburden determinations and tests of sterility — Part 3: Telematics data for tissue-based products TC 130 Graphic technology TC 204 Intelligent transport systems ISO/CD TR Graphic technology — Dry back calculation for ISO/CD Intelligent transport systems — Identifiers — 23805 offset printing process 17419-2 Part 2: Management and operation of registries TC 131 Fluid power systems ISO/CD Intelligent transport systems — Geographic ISO/DTR Hydraulic fluid power — Impact and use of ISO 20524-2 Data Files (GDF) GDF5.1 — Part 2: Map data 22681 11171:2016 µm(b) and µm(c) particle size des- used in automated driving systems, Coopera- ignations on particle count and filter test data tive ITS, and multi-modal transport TC 138 Plastics pipes, fittings and valves for ISO/CD 21202 Intelligent transport systems — Partially the transport of fluids Automated Lane Change Systems (PALS) — Functional / operational requirements and test ISO/CD 6259-2 Thermoplastics pipes — Determination of procedures tensile properties — Part 2: Pipes made of unplasticized poly(vinyl chloride) (PVC-U), ori- TC 206 Fine ceramics ented unplasticized poly(vinyl chloride (PVC-O), ISO/CD 23242 Fine ceramics (advanced ceramics, advanced chlorinated poly (vinyl chloride) (PVC-C) and technical ceramics) — Test method for flexural high-impact poly (vinyl chloride) (PVC-HI) strength of monolithic ceramic thin plates at TC 147 Water quality room temperature by three-point or four-point bending ISO/CD 22066 Water Quality — Determination of available total cyanide — Method using segmented flow TC 221 Geosynthetics injection, in-line ultraviolet Digestion Analysis ISO/CD Geotextiles and geotextile-related products — by gas Diffusion and amperometric detection 12958-1 Determination of water flow capacity in their TC 150 Implants for surgery plane — Part 1: Index test ISO/CD TS Cardiovascular implants and extracorpor- ISO/CD Geotextiles and geotextile-related products — 17137 eal systems — Cardiovascular absorbable 12958-2 Determination of water flow capacity in their implants plane — Part 2: Performance test TC 171 Document management applications TC 238 Solid biofuels ISO/CD Document management — Minimum require- ISO/CD Solid biofuels — Determination of off-gassing 19475-1 ments for the storage of documents — Part 1: 20048-2 and oxygen depletion characteristics — Part Capture 2: Operational method for screening of carbon monoxide off-gassing ISO/CD Document management — Minimum require- 19475-2 ments for the storage of documents — Part 2: TC 261 Additive manufacturing Storage ISO/ASTM CD Additive Manufacturing — Standard Specifi- ISO/CD Document management — Minimum require- 52903-3 cation for Material Extrusion Based Additive 19475-3 ments for the storage of documents — Part 3: Manufacturing of Plastic Materials — Part 3: Disposal Final parts TC 172 Optics and photonics TC 262 Risk management ISO 9022- Optics and photonics — Environmental test ISO/CD 31022 Risk management — Guidelines for the man- 3:2015/CD methods — Part 3: Mechanical stress — agement of legal risk Amd 1 Amendment 1 TC 268 Sustainable cities and communities ISO/CD Integrated optics — Vocabulary — Part 1: ISO/CD 37163 Smart community infrastructures — Guidance 11807-1 Basic terms and symbols on smart transportation for allocation of park-