DOCSLIB.ORG

Pom Pom Instructions

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Pom Pom Instructions Make a POM POM Make a POM POM PROVIDED: Yarn | FROM HOME: Clean fork, and scissors PROVIDED: Yarn | FROM HOME: Clean fork, and scissors STEP 1: Take the yarn and wrap it around the fork about 100 mes. STEP 1: Take the yarn and wrap it around the fork about 100 mes. Make sure to leave two loose pieces of wool to e all the Make sure to leave two loose pieces of wool to e all the loops of yarn together (see photos above). loops of yarn together (see photos above). OVER OVER Make a POM POM Make a POM POM PROVIDED: Yarn | FROM HOME: Clean fork, and scissors PROVIDED: Yarn | FROM HOME: Clean fork, and scissors STEP 1: Take the yarn and wrap it around the fork about 100 mes. STEP 1: Take the yarn and wrap it around the fork about 100 mes. Make sure to leave two loose pieces of wool to e all the Make sure to leave two loose pieces of wool to e all the loops of yarn together (see photos above). loops of yarn together (see photos above). OVER OVER STEP 2: Slip the wool off the fork and cut the wool loops in half with STEP 2: Slip the wool off the fork and cut the wool loops in half with your scissors, as in the photo above. your scissors, as in the photo above. STEP 3: Roll your pom pom around and trim it to make it more round. STEP 3: Roll your pom pom around and trim it to make it more round. Credits Credits InstrucƟons & photos from: InstrucƟons & photos from: hps://www.instructables.com/id/Mini‐Fork‐Pom‐Poms hps://www.instructables.com/id/Mini‐Fork‐Pom‐Poms Template created by Maine State Library: Template created by Maine State Library: The Maine State Library helps people, makes Maine libraries stronger and transforms The Maine State Library helps people, makes Maine libraries stronger and transforms informaon into knowledge. informaon into knowledge. STEP 2: Slip the wool off the fork and cut the wool loops in half with STEP 2: Slip the wool off the fork and cut the wool loops in half with your scissors, as in the photo above. your scissors, as in the photo above. STEP 3: Roll your pom pom around and trim it to make it more round. STEP 3: Roll your pom pom around and trim it to make it more round. Credits Credits InstrucƟons & photos from: InstrucƟons & photos from: hps://www.instructables.com/id/Mini‐Fork‐Pom‐Poms hps://www.instructables.com/id/Mini‐Fork‐Pom‐Poms Template created by Maine State Library: Template created by Maine State Library: The Maine State Library helps people, makes Maine libraries stronger and transforms The Maine State Library helps people, makes Maine libraries stronger and transforms informaon into knowledge. informaon into knowledge. .
Load more

Recommended publications
  • Sulphur Butterfly Crochet Pattern
    Sulphur Butterfly Crochet Pattern MATERIALS DK-weight (#3) yarn in yellow/white and tan/grey/brown 3.5mm (E) crochet hook Tapestry needle Scissors GLOSSARY OF TERMS & ABBREVIATIONS chain stitch (ch): To make, draw yarn through the active loop on the hook. fasten off: cut the yarn 3 to 4 inches from the last stitch and draw the end through the active loop. Pull tightly to secure. double crochet stitch (dc): To make, yarn over, insert hook into indicated stitch, draw up a loop, (there will be three loops on the hook) yarn over and draw through two loops, yarn over and draw through two loops again. double-treble crochet stitch (dtc): To make, yarn over three times, insert hook in indicated stitch, draw up a loop (there will be 5 loops on the hook), yarn over and draw through 2 loops four times. front loop only (FLO): Indicates the location of where to place a stitch. Out of the two loops in the top of a stitch, only work under the one which is closest to the crocheter. half-double crochet stitch (hdc): To make, yarn over, insert hook into indicated stitch, draw up a loop, (there should be three loops on the hook) yarn over and draw through all three loops. long single crochet (spike stitch): To make, insert hook into the indicated location in a previous row, draw up a long loop (back up to the current row), yarn over and draw through both loops. single crochet stitch (sc): To make, insert your hook into the indicated stitch, draw up a loop, yarn over and draw through both loops.
    [Show full text]
  • Mending As Practice and Expression Pocosin Arts Online - August 2021 Material Suggestions
    Mending as Practice and Expression Pocosin Arts Online - August 2021 Material Suggestions I want this experience to ft with what you have on hand and what you want to learn! I will link to sources of some supplies I like below, but there is no need to purchase anything unless you want to and think you will use it. You can also check the links to compare supplies to those you may already have. And of course you can get supplies anywhere you like. The most important thing you will need is some fabric scraps or worn-out textles to practce mending on (not your absolute favorite thing to start with). There are two broad categories of fabrics, based on how they are made; woven (like jeans, dress shirts, and sheets) and knited (like sweaters, socks, and T-shirts). We will talk a lot more about these in class. Each type lends itself to somewhat diferent tools and techniques. If you can, I encourage you to fnd a few scraps of each type to practce on, ideally in fabrics that are similar to the items you want to mend. These will also be a good source of material to cut patches from. I will be in touch before our class starts to fnd out about the projects you want to work on. For now, here are some general suggestons of materials and tools you may want to have on hand. In the meantme, feel free to contact me with any questons! [email protected] Threads You may want to use anything from sewing thread to wool yarn in your mending, depending on what you want to fx.
    [Show full text]
  • How to Slip Knot & Chain Stitch
    How to Slip Knot & Chain Stitch Appearance in pattern - ch Crochet usually begins with a series of chain stitches called a beginning or foundation chain. A slip knot is the first step in most crochet projects. We will begin by making a slip knot on the crochet hook about 6 inches from the free end of the yarn. You will first start by creating a loop with the yarn. Be sure that the free end of the yarn is dangling behind your loop (see illustration 3). Insert the crochet hook through the center of the loop and hook the free end (see illustration 4). Pull this through and up onto the working area of the crochet hook (see illustration 5). Pull the free yarn end to tighten the loop (see illustration 6). The loop on the crochet hook should be firm, but loose enough to slide back and forth easily on the hook. Be sure you still have about a 6-inch yarn end. Once you have the yarn wrapped, hold the base of the slip knot with the thumb and index finger of your left hand. Step 2: Bring the yarn over the crochet hook from back to front and hook it (see illustration 8). Draw hooked yarn through the loop of the slip knot on the hook and up onto the working area of the crochet hook (see arrow on illustration 9); you have now made one chain stitch (see illustration 10). Step 3: Again, hold the base of the slip knot and bring the yarn over the crochet hook from back to front (see illustration 11).
    [Show full text]
  • Simple Crocheted Blanket Materials • Hook – Size G • Yarn – Acrylic Baby
    Simple Crocheted Blanket Materials Hook – Size G Yarn – Acrylic Baby Yarn (NO MOHAIR) 140 Stitches for 36”‐38”; 3‐ply – 120 stitches (approx.); 4 –ply – 100 stitches (approx.) Instructions ROW 1 – Chain enough stitches to make string 36‐38” ROW 2 – Double crochet in each chain, starting in 3rd stitch; Chain 3 turn ROW 3 to END – Starting in 2nd DC; continue back and forth until blanket is square. FINISH Tie off end; Weave end of thread into blanket. NO FRINGE PLEASE Option– Single crochet around 4 sides (making 3 S.C. in corner stitch) as a border. Marge’s “Very Easy” Crochet Baby Blanket Materials Baby or Sport Yarn (approximately 6 skeins – 3 ply) G Hook Instructions Row 1 – Chain 140 stitches (36”‐38”) or 100 stitches with 4‐ply Row 2 – DC (Double Crochet) in 4th stitch from end, DC across; at end Ch. 3 Row 3 – DC in 1st DC, continue across row, Ch. 3 at end; Repeat Row 3 until blanket is square Last Row = Tie off end. Weave 2‐3” of yarn into blanket to hide end. Option – Can do a crochet edge around just as a finish. Bev's Stretchy Knit Baby Cap copyright 2001, 2010 Beverly A Qualheim This cap can be made for a boy or girl preemie, and fits from 2- 3 lbs- (4-5 lb) (7-8 lb) babies . It is super fast to knit up and will stretch to fit. 1 oz. of sport or baby yarn - not fingering Size 9 knitting needles (size 5 Canadian and English -5.5 mm) Loosely cast on 36 (44) (50) sts.
    [Show full text]
  • Designing 2D and 3D Textiles Using Yarn Engineering and Vr
    INTERNATIONAL DESIGN CONFERENCE - DESIGN 2002 Dubrovnik, May 14 - 17, 2002. DESIGNING 2D AND 3D TEXTILES USING YARN ENGINEERING AND VR Zoran Stjepanovic and Anton Jezernik Keywords: Yarn Engineering, 2D and 3D Textiles, Machine Learning, Virtual Reality 1. Introduction Virtual reality presents a promising technology that can be treated as a potential enrichment of conventional computer aided technologies. The contribution gives an overview of the application of yarn engineering and virtual reality for designing linear and flat textile structures, as well as clothing products. Modern textile and garment manufacturers will be soon able to use the entire range of conventional CAD/CAM systems together with virtual reality and Internet-based technologies in order to strengthen their position on the market building a completely new electronic-business offer. Numerous researches from theory and technology of spinning have shown how we can influence the mechanical properties and regularity of a yarn as well as significantly reduce the number of yarn faults using the appropriate raw material and suitable mixing proportion. In the first part of this contribution the influence of quality characteristics of cotton fibres and constructional parameters of a yarn on the most important properties of cotton yarn are presented. The achieved results have been used for determination of optimised cotton fibre blends regarding the quality of price of a cotton yarn. The second part of a paper discusses the possibilities to use the results of yarn engineering for setting- up the complex system for virtual fabric and garment development, which, together with the intelligent textile and garment manufacture, can be treated as the most important parts of the Global Retailing Concept.
    [Show full text]
  • Yarn Couching
    Threads n Scissors Machine Yarn Couching IMPORTANT: PLEASE READ Materials These designs are made to be used with a Freemotion Yarn Stabilizer: Couching Foot. Please check with your dealer regarding this Either two layers of foot for your machine. water soluble OR I own a Bernina Artista and use the #43 foot 1 layer of cutaway The designs are smaller than a regular design. Be sure to use a large hoop for these designs. The Yarn Couching Foot is Freemotion Yarn Couching Foot LARGER than a normal embroidery foot and needs the extra space not to hit into the hoop. 2mm diameter yarn or Before starting any Yarn Couching Design, snap the Yarn cording to be used with foot Couching Foot firmly into place, put your hoop into the ma- chine and LIFT the pressure foot. Check the design or Trace Fabric of choice, I used the design to be sure that the foot won’t hit the embroidery suede type fabric hoop when stitching. When you are sure all is right, you may start stitching your designs. Embroidery thread Follow these Instructions to continue with the stitching of your design. No 80 embroidery needle or needle rec- ommended to be used Hoop either 2 layers of water soluble stabilizer OR 1 layer of cutaway stabilizer with couching foot with your fabric. Using a normal embroidery foot, stitch out the design leaving the last color. Some of the Designs may have the same color used two or three times at the end. Don’t stitch these yet. These are color stops used for the yarn or cording.
    [Show full text]
  • Sashiko Tote
    Sashiko Tote You can never have too many bags! Create unique tote featuring Sashiko quilting and accent stitching. This project is quick and easy to make using the Baby Lock Sashiko machine. Skill Level: Beginner Created by: Kelly Laws, Marketing Project Manager Supplies: Baby Lock Sewing Machine Baby Lock Sashiko Twenty 4” cotton print squares in different colors 1 yard fusible fleece 1 1/4 yard coordinating cotton fabric 2 ½ yards ¾” wide gross grain ribbon All-purpose thread to match fabrics 30-Weight thread in white and black Fusible Web (optional) Iron and Ironing board Scissors Pins Ruler Chalk Baby Lock Sewing Project: Sashiko Tote Page 1 of 3 Instructions: 1. Thread the machine with all-purpose thread to match your fabrics. Using a ¼” seam sew five blocks together to form a row. 2. Create 3 more rows of 5 blocks alternating the block colors. 3. Sew two rows together to create the pieced band for the bag front. 4. Repeat to make a pieced band for the other side of the bag. 5. Cut four pieces 18” x 15” from the cotton fabric. 6. Cut two pieces of fusible fleece 18” x 15”. 7. Following the manufactures directions, fuse the fleece to the wrong side of two of the 18” x 15” pieces. 8. Sew the two fleece pieces together along one of the 15” sides. 9. Sew the other two 18” x 15” pieces together along one of the 15” sides. This is the tote lining, set this piece aside for later. 10. Open the piece out into one long strip.
    [Show full text]
  • 1 MULTIUSE, EMBROIDERY and SEWING SCISSORS Stainless Steel
    WWW.RAMUNDI.IT GIMAP s.r.l. 23834 PREMANA (LC) ITALY Zona Ind. Giabbio Tel. +39 0341 818 000 The line is composed by extremely high performance items, result of over 70 years of research of perfect cutting performances. Every single item is produced with the best materials and is carefully controlled by the expert hands of our artisans, from the raw material to the last control phase. The Extra line quality will satisfy all your needs. MULTIUSE, EMBROIDERY AND SEWING SCISSORS Stainless steel and handles in nylon 6 Series of professional scissors for textile, embroidery and multipurpose use. Made in AISI 420 steel, these scissors will allow you to made every kind of job with an extreme confort and precision. The scissors are made with special machines that make a perfect finish and operation that lasts over time. Nylon 6 handle are made with fiberglass with an innovative design and it can be use in contact with food. multiuse scissors in stainless steel and handles 553/5 in nylon 6 13 cm 553/6 15 cm 553 552/7,5 19 cm 552/8,5 21 cm 552/9,5 24 cm 552/10,5 26 cm 552/11 28 cm 552M Left- hand 22 cm 552 240/1/3,5 Embroidery scissors 9 cm 241/1/4 Embroidery scissors bent 10 cm 241/1/4 240/1/3,5 351/4 Sewing scissors 10,5 cm 351/5 12,5 cm 351/6 15 cm 351 485/7 Multiuse scissors 19 cm 360MN/4,5 Thread clipper 485/7 360MN/4,5 1 WWW.RAMUNDI.IT GIMAP s.r.l.
    [Show full text]
  • 4.3 Characterization Methods for Slub Yarns
    ABSTRACT Jaganathan, Sudhakar. Characterization Methods and Physical Properties of Novelty yarn. (Under the guidance of Dr. William Oxenham) The purpose of this work is to find the characterization methods which quantitatively define the inherent properties of novelty yarn. The research was divided in to two parts. In the first part various instrumental methods and techniques were investigated to characterize the physical properties of the novelty yarns. Various structural properties of gimp and slub yarns were defined and characterized. Instrumental method included CTT Tester, Hairiness tester and a Traveling Microscope. An image analysis algorithm was proposed to measure the size distribution of novelty yarn structural effects. In the second part visual perception of novelty yarn texture was characterized. A texture nomenclature based on the theory of “Textons” was developed. A human psychological survey was conducted to get observers response on texture terms. We proposed various image analysis methods to quantitatively characterize the novelty yarn texture. The image analysis method had good correlation with human psychological response on the novelty yarn texture. CHARACTERIZATION METHODS AND PHYSICAL PROPERTIES OF NOVELTY YARN by SUDHAKAR JAGANATHAN A thesis submitted to the Graduate Faculty of North Carolina State University In partial fulfillment of the Requirement for the degree of Master of Science Textile Management and Technology COLLEGE OF TEXTILES Raleigh, NC 2005 Approved by: Dr.William Oxenham Chair of the Advisory Committee Dr.Nancy Powell Dr.Pamela Banks-Lee Committee Member Committee Member Dedicated to Amma, Appa, Anni and Anna for all the support and encouragement they have given ii Biography Sudhakar Jaganathan was born on June 29, 1979 in Coimbatore, India.
    [Show full text]
  • Behind the Scenes Behind the Scenes
    A Noro aficionado for more than twenty-five years, designer Cornelia Tuttle Hamilton took the trip of a BehindBehind lifetime, traveling to Japan from her home in Sweden thethe ScenesScenes to meet the man by Cornelia Tuttle Hamilton behind the yarn. y relationship with all that is Noro began in the early 1980s. It is obvious that every new day still brings new discoveries of color and I had just returned from a train trip around Europe that I form based largely on an acute observation of nature and its rhythms, M undertook to find direction in my professional life. The outcome seasons, textures and colors. Mr. Noro’s calm dignity and humor were was an ambitious decision to pursue careers in both photography and evident even though we needed an interpreter to communicate. hand-knit design. As fate would have it, the design part of my decision quickly developed and pushed out the photography—at least for the time The Company being. Eisaku Noro was raised in the town of Ichinomiya in Central Japan, a Upon my return to Manhattan I took a sales job at Fiberworks, which region known for its yarn and textile production. Impatient with school, was probably the most avant-garde yarn shop in New York at the time. Noro began working in the yarn industry after his basic education in Owned by crochet designer Judith Copeland, Fiberworks was more a spinning and dyeing was completed. He quickly learned the ropes. gallery than a yarn shop, where handcrafted yarns from Noro lit up the An innovator with an artistic eye even back then, Noro soon became shelves and were featured in artfully displayed handknit garments.
    [Show full text]
  • Astronauts in Lunar Orbit After Blastoff from Moon
    ri . v f- ■ ,, Average Dally Net Press Ron 'I’hfe-Weather For The Week Ended Mostly cloudy, warm, humid through Wednesday with chance July 81, m i of ahowers/thunderstorms; low tonight near. 70 with consider­ 14,890 able night rain. Manchester— A City of Village Charm (Classified Advertising on Page 17) PRICE FIFTEEN CENTS VOL. LXXXX, NO. 257 (TWENTY PAGES) man(:hester, conn., Monday, august 2,1971 Steel Strike Averted But Pact Settles Astronauts in Lunar Orbit Prices Hiked PITTSBURGH (AP)— Rail Strike U.S. Steel Corp., the in­ After Blastoff from Moon dustry pacesetter, hiked WASHINGTON (A P)— Negotiators announced to­ prices on virtually all prod­ day a contract settlement providing 42 per cent wage ucts today, a little more hikes over 42 months for about 200,000 trainmen, and SPACE CENTER, Hous­ than 12 hours after the said pickets would be removed froih 10-strike-bound ton (A P)—Apollo 15 as­ steel industry and the railroads, -------------------- : tronauts David R. Scott and James B. Irwin blast­ United Steelworkers Settlement of the 18-day old President Charles Luna of the ' strikes in the dispute involving striking-AFO-CTO United Trans- ed off safely from the agreed on a strike-avert­ all of the nation’s major rail- portatlon Union, ing contract. moon today after three roads came after a 17-hour <‘nve arp very happy that this days of historic lunar ex­ The m oveby U.S. Steel came marathon bargaining session at long dispute has ended and that as most of the nation’s steel ploration. A television the Labor Department.
    [Show full text]
  • A Pair of Scissors Wool a Sewing Needle Small Knitting
    Easy peasy (well, it is if you take a look at the champion ‘how to knit’ guide at www.learn2knit.co.uk which will give you everything you need.) But if you’ve 1. Pop your feet up with a cup of tea. done a bit in the past, here’s a reminder of the main stitch. 2. Using double knitting yarn and some small needles, cast on 28 stitches. You’ll need this stuff: 3. Knit 2 rows. Then, starting with a knit row, work in stocking stitch (knit 1 row, purl 1 row, knit 1 row etc) for 12 more rows. small knitting 4. For the next row, knit 2 together to the end (14 a sewing a pair perhaps wool needles stitches). And for the row after that, purl 2 together needle of scissors some bobbles (31/4 mm - 4mm) to the end (7 stitches). 5. When you’ve finished, cut the yarn leaving about 25 cm. Thread the cut end of the yarn through a sewing needle, then run it through the loops and 1. Insert the tip of the right needle through the first loop remove the knitting needle (fig. A). on the left needle, from front to back. Then wrap the working yarn around the tip of the right needle. 6. Tighten the yarn (fig. B) and sew the little hat together at the side (fig. C). Once finished, turn it right-side out so that the seam you've just sewn runs up the inside. 7. Just to check you’re on the right track we reckon 2.
    [Show full text]