FR-CL LBP Compressor R404A/R507 220-240V 50Hz

Collection of Datasheets Compressors Compressors for R404A/R507 220-240V 50Hz

• R 04A R404A • R 7 507 • R404A • R • R507 • R404A • R50 4A • R507 • R404A • R507 R404A • R507 • R404A • R507 • 7 • R404A • R507 • R404A • R507 • R

R507 • R404A • R5078238-8 • R404A • R50• A • R507 • R404A • R507 • R404A • R 404A • R507 • R404A • R507 • R404A7 • R404A • R507 • R404A • R507 • R4 • R507 R404A• R404A• •R404A R507• R507R404A •• R404A•R507 R404AR404A • R507 • R404A•R404 R507•• •R50R5 R4

February 2000 CK.54.B5.02 1 1. General This collection of datasheets contains information on Danfoss hermetic refrigeration compressors for 220-240V especially designed for refrigeration systems using refrigerant

R404A (CHF2CF3 / CH3CF3 / CH2FCF3) / R507 (CHF2CF3/CH3CF3).

The programme consists of the basic types TL, FR, SC and SC Twin.

8238-3 8238-5 TL FR

8238-6 8238-7 SC SC Twin

1.1 Compressor The compressor designations are built up according to the following system: designations Compressor Optimization- Compressor Application design level size range

TL CL Blank Nominal displacement R404A/R507 LBP FR Standard energy level in cm3 DL R404A/R507 HBP SC (Twin)

Example

TL 4 CL

FR 6 DL

1.2 Design All Danfoss compressors for R404A/R507 from the TL, FR, and SC range are standard efficiency types.

1.3 Type label All compressors have a yellow label with the SC10DL 104L type designation. This label has a lilac stripe Application 220-240V~50Hz MBP/HBP HST R404A and the text ”R404A/R507“. R507 The country of origin indicated on the compres- Lilac stripe Approvals sor paper label and on the compressor cover Barcode on 2525 varies depending on the manufacturing place. white background DANFOSS COMPRESSORS 8306-2 Yellow background Information can be found on our technical information sheet ”Country of Origin“.

2 CK.54.B5.02 February 2000 1.4 Data stamping The compressor type and production date are stamped on the side of the compressor. The information may be as follows,

L-4CL-2071 F-208E2207

The first line states the model designation and the code no. L- = last letter (or last two letters) of the compressor type 4CL = nominal displacement and application 2071 = 4 last digits in the code no. (- = position mark)

The second line states the date of manufacture and internal Danfoss codes. F = manufacturing place (F = Germany, AL = Slovenia, AM = Mexico) 20 = week 20 8 = 1998 E = Friday (A = Monday etc.) 220 = nominal voltage 7 = internal Danfoss code

1.5 Compressor The build-in conditions (total height, weight, tube dimensions etc.) are specified in the dimensions individual datasheets including dimensioned sketches for the compressors.

2. Application range CL Compressors with denominations ending with CL are designed for low evaporating temperatures (LBP Low Back Pressure) for use in commercial refrigerators, freezers and similar applications in regions with normal supply voltage.

DL Compressors with denominations ending with DL are primarily designed for high evap- oration temperatures (HBP High Back Pressure) for use in commercial refrigerators, liquid coolers, dehumidifiers, refrigerated display counters, vending machines, heat pumps, and similar applications.

The following table shows the normally recommended applications as regards voltage/ frequency, ambient temperature, evaporating temperature and necessary compressor cooling. The recommendations must be regarded as a guideline only as they presuppose a proper dimensioning of the refrigeration system.

Ambient temperature Csompressor Main 3C2°C 38° LPBP HPB LPB HB TL4CL 1F98 - 254 /50 2 F2 CL FR6 - 8.5CL 1F98 - 254 /50 2 F2 SC10 - 12 - 15 -18 - 21CL 1F98 - 254 /50 2 F2 TL4DL 198 - 254 /50 F2 F2 DL FR6DL 198 - 254 /50 F2 F2 SC10 - 12 - 15DL 198 - 254 /50 F2 F2 S = Static cooling normally sufficient O = Oil cooling

F1 = Fan cooling 1.5 m/s (compressor compartment temperature equal to ambient temperature)

F2 = Fan cooling 3.0 m/s necessary = Outside application range, not recommended * = Run capacitor compulsory ** = Not applicable below -25°C evaporating temperature in 43°C ambient temperature above 240V The application limits regarding evaporating temperatures and motor systems are specified in the individual compressor datasheets.

February 2000 CK.54.B5.02 3 2.1 Design limits In order to secure a satisfying lifetime of the compressor, and to protect the compressor against overload, some design criteria for the appliances must be fulfilled. Both the condensing temperature and the compressor temperature should be kept as low as possible. This can be done by using well-dimensioned condenser surfaces and by ensuring good ventilation around the compressor under all operating conditions. In order to protect the compressor against overload, the compressor has to start and work properly through pressure peaks obtained in the highest ambient temperature and lowest working voltage. At peak load the condensing temperature must not exceed 60°C. The winding temperature must not exceed 135°C. Condensing temperature At stable operation conditions the condensing temperature must not exceed 50°C. The Winding temperature winding temperature must not exceed 125°C. These limitations ensure a protection of valves, gaskets, oil, and motor insulation.

3. Electrical equipment The compressors are equipped with a single-phase AC motor and High Starting Torque (HST) starting characteristics. The electrical equipments are classified as ”normal tight“ (IP20) The motor protector is built into the motor (winding protector). Earth connections are located on the bracket around the current lead-in of the compressor. No attempt must be made to start the compressor without a complete starting device.

The compressors can be supplied with the following motor systems:

3.1 HST (CSIR) Compressors with the motor type Capacitor Start Induction Run (CSIR) have a starting device for High Starting Torque (HST). This starting device consists of a starting relay and a starting capacitor and is used for compressors with the denominations TL, FR, and SC. The starting device requires no pressure equali- zation before each start and is normally used in refrigerating systems with expansion valve as throttling device or in capillary tube systems where pressure equalizing is not obtained during the standstill periods. The starting capacitor is designed for short time cut-in. ”1.7% ED“, 8076 which is stamped on the starting capacitor, means for instance max. 10 cut-ins per hour TL, FR each with a duration of max. 6 seconds (normally shorter than 1 sec.).

3.2 HST (CSR) Compressors with the motor type Capacitor Start Run (CSR) have a starting device for High Starting Torque (HST). This starting device consists of a starting relay, a starting capacitor, a run capacitor, a terminal board, a cord relief, and a cover. The starting device is mandatory for some of the biggest SC compressors. The starting capacitor is designed for short time cut- in. ”1.7% ED“, which is stamped on the starting capacitor, means for instance max. 10 cut-ins per hour each with a duration of 6 seconds. 8191

SC For further information on which starting device to use on individual compressors, please refer to the actual datasheets.

4 CK.54.B5.02 February 2000 3.3 Connections The power supply must be connected as shown in the wiring diagrams for the chosen electrical equipment given in the actual datasheets.

3.4 Approvals The compressors have been approved in respect of safety by testing authorities in the majority of Western European countries. Actual standards to which the compressors have been approved are specified in the individual datasheets. Approval markings appear on the compressor labels.

4. Moisture and The compressors are dried to a maximum moisture content of 60 to 75 mg depending on Impurities the compressor size. The maximum impurity content is 40 to 50 mg depending on the compressor size.

5. Max. refrigerant The refrigerant charge must never be too large to be contained on the condenser side of charge the refrigeration system. Only the refrigerant amount which is necessary for the system to function must be charged. The refrigerant amount may be critical as regards oil foaming and liquid hammer after long standstill periods. Because of this, limitations of refrigerant charges have been introduced. The maximum refrigerant charge is specified in the individual datasheets. If these limitations cannot be complied with, the risk may be reduced if a crankcase heater is properly used or if a pump down system is established.

6. Oil charge The compressors are supplied charged with dried and degassed oil, which is normally sufficient for the lifetime of the compressor. The refrigeration systems and the system components must be dimensioned in such a way that the oil can be lead back con- tinuously to the compressor housing without accumulating in the system, e.g. without oil pockets and with sufficient gas velocity. The compressors use polyolester oils and are approved only for these oils and R404A/R507. The oil charge is specified in the individual datasheets.

February 2000 CK.54.B5.02 5 7. Mounting Soldering problems caused by oil in the connectors can be avoided by placing the compressor on its baseplate some time before soldering it into the system. The compressor must never be placed upside down when mounting the rubber grommets in the baseplate. Instead place the compressor on its side with the connectors upwards.

7.1 Mounting accessories

Grommet sleeve Washer Nut M6 Clip Washer Steel pin Compressor base Compressor base Cabinet base Rubber grommet 9 9 7382 3327

Cabinet base Screw M6 x 25 Rubber grommet

Bolt joint Snap-on joint

The mounting accessories for the compressors are available in two versions, with bolt joint or snap-on joint. The rubber grommets are designed for the 16 mm holes of the baseplate.

Bolt joint for one compressor in a bag 118-1917 Bolt joint in quantities 118-1918 Snap-on in quantities 118-1919

8. Condition at delivery The compressors are delivered without mounted starting devices on pallets with the dimensions 1144 x 800 mm. Quantities per pallets are specified in the individual datasheets. Electrical equipment is packed in separate boxes.

The most important performance controls carried out during manufacturing are, • A high potential insulation test with 1650V for 1 second • Pumping capacity • Tightness of discharge side and discharge valve • Tightness of compressor housing • Check of the right oil charge • Noise test

The compressors are supplied with sealed connectors and the sealing should not be removed before the system assembly takes place (max. 15 minutes with open connectors).

9. Twin compressors The Twin version consists of two SC compressors mounted on a common baseplate. The two compressors are joined by an oil-equalizing tube and also have an intake manifold with screw connector for a service valve or a solder connector (these parts are supplied as accessories). Each Twin compressor is supplied with two sets of electrical equipment and mounting accessories. To ensure optimum starting characteristics and the smallest possible mains load we recommend that the compressors be equipped with a time-delay relay for start of the second compressor. Twin compressors can operate with capacity regulation depending on the controls used.

6 CK.54.B5.02 February 2000 10. Conversion from Normally, the same system components can be used as were used with R502. However, R502/R22 to an adjustment of the charge has to be made. R404A/R507 A drier with 3Å desiccant of Molecular Sieves or a hard core drier compatible with R404A must always be used.

Rules for dryness and cleanliness of system components (DIN 8964) are transferred to R404A systems.

The system components must not contain mineral oil or greasy substances.

The compressors must be soldered into the system no later than 15 minutes after the connector seals have been removed.

The same evacuation procedure as for R502/R22 systems must be used.

Max. 1% non-condensable gases.

The system must not contain any chlorine.

The charging equipment must only be used for R404A/R507.

11. Warnings No high potential test nor start tests must be carried out while the compressor is under vacuum. No attempt must be made to start the compressor without a complete starting device. Allow the compressor to assume a temperature above 10°C before starting the first time in order to avoid starting problems. Anti-freeze agents must not be used in the compressors as such agents are damaging to several of the materials used. In particular, the ethyl or methyl alcohol contents of such anti-freeze agents have a destructive effect on the synthetic motor insulation.

February 2000 CK.54.B5.02 7 TL-CL LBP/MBP Compressor R404A/R507 220-240V 50Hz

Data Sheet (Replaces CD.51.A4.02)

General Compressor TL4CL TL4CL 102U Application Code number 102U2071 R404A R507 Lilac stripe Application Approvals Application LBP/MBP Barcode on white background 2071 DANFOSS COMPRESSORS Evaporating temperature range °C -45 to -5 Yellow background 8294 Voltage range V/Hz 198 - 254 /50 Motor type CSIR

Max. ambient temperature °C 38 S = Static cooling normally sufficient O = Oil cooling Comp. cooling at ambient temp. 32°C F2 F1 = Fan cooling 1.5 m/s 38°C F2 (compressor compartment temperature equal to ambient temperature)

F2 = Fan cooling 3.0 m/s necessary Design Displacement cm3 3.86 Oil quantity cm3 280 Maximum refrigerant charge g 600 Free gas vol. in compressor cm3 1690 Weight without electrical equipment kg 7.6

ø16 Motor Motor size watt 140 LRA (rated after 4 sec. UL984) HST A 5.7 70 35 100 Cut-in current HST A 5.7 Ω Resistance, main and start winding (25°C) 14.8/14.5 ø9 Approvals EN60 335-1/335-2-34 §19.3 170 178 186 C 204 D Dimensions or or 222 Height mm A 173 D 176 C B169 E

31.5°

Suction connector location/I.D. mm C 6.2 ±0.09 28°

30° Process connector location/I.D. mm D 6.2 ±0.09 A B Discharge connector location/I.D. mm E 5.0 +0.12/+0.20 107 105 105 Compressors on a pallet pcs. 125

8263 157

45° 20° 60.5 29 66

51° 71

102 96 117

February 2000 CF.52.A1.02 1

8 CK.54.B5.02 February 2000 Capacity (CECOMAF) watt C5omp.\°C -04 -54 -03 -53 -32 -023. -52 -01 -51 - T2L4CL 556480121 154 125 108 263 228 35 c Capacity (ASHRAE) watt C5omp.\°C -04 -54 -03 -53 -32 -023. -52 -01 -51 - T0L4CL 667898162 106 128 281 246 313 41 b Power consumption watt 8219 C5omp.\°C -04 -54 -03 -53 -32 -023. -52 -01 -51 - a2 T1L4CL 8195110 102 174 104 196 187 159 21

d Current consumption A C5omp.\°C -04 -54 -03 -53 -32 -023. -52 -01 -51 - T9L4CL 09.8 00.7 08.8 01.8 15.0 14.0 15.1 18.2 11.2 1.3 c

10 11 COP (CECOMAF) W/W C5omp.\°C -04 -54 -03 -53 -32 -023. -52 -01 -51 - 12 13 T4L4CL 02.6 01.7 00.8 02.9 16.0 14.0 18.1 15.2 14.4 1.6 14

COP (ASHRAE) W/W Main winding Start winding C5omp.\°C -04 -54 -03 -53 -32 -023. -52 -01 -51 - Winding protector T4L4CL 03.7 04.8 05.9 18.0 13.1 13.2 10.3 19.5 12.6 1.9

Test conditions CECOMAF ASHRAE Condensing temperature 45°C 45°C Ambient and suction gas temperature 32°C 32°C Liuqid temperature 45°C 32°C

Fan cooling F2, 220V 50Hz

Accessories Devices FLig. TL4C S2tarting relay a0117U600 Cb0over 103N201 Starting capacitor 60 µFc4117U501 Cd0ord relief 103N101 Mounting accessories Bolt joint for one compressor 118-1917 Bolt joint in quantities 118-1918 Snap-on in quantities 118-1919

2 CF.52.A1.02 February 2000

February 2000 CK.54.B5.02 9 FR-CL LBP/MBP Compressor R404A/R507 220-240V 50Hz

Data Sheet (Replaces CD.53.A3.02)

General Compressor FR6CL FR6CL 103U Application Code number 103U2670 R404A R507 Lilac stripe Application Approvals Application LBP/MBP Barcode on white background 2670 DANFOSS COMPRESSORS Evaporating temperature range °C -45 to -5 Yellow background 8295 Voltage range V/Hz 198 - 254 /50 Motor type CSIR

F2 = Fan cooling 3.0 m/s necessary Design Displacement cm3 6.23 Oil quantity cm3 450 Maximum refrigerant charge g 850 Free gas vol. in compressor cm3 1350 Weight without electrical equipment kg 10.5 204 ø16 ø19 178 Motor Motor size watt 215 LRA (rated after 4 sec. UL984) HST A 8.2 70 35 127 150 60.5 Cut-in current HST A 8.2 101.6 Resistance, main and start winding (25°C) Ω 8.9/12.0 ø9.7 Approvals EN60 335-1/335-2-34 §19.3 127 165 170 186 Dimensions D 200 C Height mm A 196 E B191 30° Suction connector location/I.D. mm C 8.2 ±0.09 30° 25° A B Process connector location/I.D. mm D 6.2 ±0.09 130 Discharge connector location/I.D. mm E 6.2 ±0.09 127 102 Compressors on a pallet pcs. 80

243 8253 ° 24°

156 40 40° 32 55 55

122.5 124.5 127.5

February 2000 CF.53.A1.02 1

10 CK.54.B5.02 February 2000 Capacity (CECOMAF) watt C5omp.\°C -04 -54 -03 -53 -32 -023. -52 -01 -51 - F7R6CL 78150 194 138 234 276 330 338 487 57 c Capacity (ASHRAE) watt C5omp.\°C -04 -54 -03 -53 -32 -023. -52 -01 -51 - F0R6CL 95182 106 232 278 380 375 434 565 67 b Power consumption watt 8219 C5omp.\°C -04 -54 -03 -53 -32 -023. -52 -01 -51 - a2 F6R6CL 122 105 108 221 234 265 237 331 355 39

d Current consumption A C5omp.\°C -04 -54 -03 -53 -32 -023. -52 -01 -51 - F3R6CL 18.1 16.1 15.2 16.3 11.4 10.5 15.6 11.7 19.9 2.0 c

10 11 COP (CECOMAF) W/W

C5omp.\°C -04 -54 -03 -53 -32 -023. -52 -01 -51 - 12 13 F1R6CL 01.6 00.7 00.8 00.9 14.0 11.0 12.1 14.2 17.3 1.4 14

COP (ASHRAE) W/W Main winding Start winding C5omp.\°C -04 -54 -03 -53 -32 -023. -52 -01 -51 - Winding protector F1R6CL 02.7 04.8 05.9 17.0 11.1 19.2 13.2 17.4 11.5 1.7

Test conditions CECOMAF ASHRAE Condensing temperature 45°C 45°C Ambient and suction gas temperature 32°C 32°C Liquid temperature 45°C 32°C

Fan cooling F2, 220V 50Hz

Accessories Devices FLig. FR6C S2tarting relay a5117U601 Cb0over 103N201 Starting capacitor 80 µFc5117U501 Cd0ord relief 103N101 Mounting accessories Bolt joint for one compressor 118-1917 Bolt joint in quantities 118-1918 Snap-on in quantities 118-1919

2 CF.53.A1.02 February 2000

February 2000 CK.54.B5.02 11 FR-CL LBP Compressor R404A/R507 220-240V 50Hz

Data Sheet

General Compressor FR8.5CL FR8.5CL 103U Application Code number 103U2890 R404A R507 Lilac stripe Application Approvals Application LBP Barcode on white background 2890 DANFOSS COMPRESSORS Evaporating temperature range °C -45 to -10 Yellow background 8295-2 Voltage range V/Hz 198 - 254 /50 Motor type CSIR

F2 = Fan cooling 3.0 m/s necessary Design Displacement cm3 7.95 Oil quantity cm3 450 Maximum refrigerant charge g 850 Free gas vol. in compressor cm3 1350 Weight without electrical equipment kg 10.6 204 ø16 ø19 178 Motor Motor size watt 275 LRA (rated after 4 sec. UL984) HST A 10.0 70 35 127 150 60.5 Cut-in current HST A 10.0 101.6 Resistance, main and start winding (25°C) Ω 7.3/12.0 ø9.7 Approvals EN60 335-1/335-2-34 §19.3 127 165 170 186 Dimensions D 200 C Height mm A 196 E B191 30° Suction connector location/I.D. mm C 8.2 ±0.09 30° 25° A B Process connector location/I.D. mm D 6.2 ±0.09 130 Discharge connector location/I.D. mm E 6.2 ±0.09 127 102 Compressors on a pallet pcs. 80

243 8253 ° 24°

156 40 40° 32 55 55

122.5 124.5 127.5

February 2000 CF.53.B1.02 1

12 CK.54.B5.02 February 2000 Capacity (CECOMAF) watt C5omp.\°C -04 -54 -03 -53 -32 -023. -52 -01 -1 F9R8.5CL 96182 126 202 279 321 387 476 57 c Capacity (ASHRAE) watt C5omp.\°C -04 -54 -03 -53 -32 -023. -52 -01 -1 F5R8.5CL 171 154 199 285 393 346 463 544 67 b Power consumption watt 8219 C5omp.\°C -04 -54 -03 -53 -32 -023. -52 -01 -1 a2 F1R8.5CL 187 119 213 257 311 343 376 421 47

d Current consumption A C5omp.\°C -04 -54 -03 -53 -32 -023. -52 -01 -1 F1R8.5CL 14.6 12.6 13.7 17.8 13.9 25.0 25.1 27.3 2.5 c

10 11 COP (CECOMAF) W/W

C5omp.\°C -04 -54 -03 -53 -32 -023. -52 -01 -1 12 13 F8R8.5CL 04.5 02.6 02.7 02.8 06.9 02.9 12.0 12.1 1.2 14

COP (ASHRAE) W/W Main winding Start winding C5omp.\°C -04 -54 -03 -53 -32 -023. -52 -01 -1 Winding protector F7R8.5CL 04.6 04.7 06.8 07.9 11.0 19.1 11.1 13.3 1.4

Test conditions CECOMAF ASHRAE Condensing temperature 45°C 45°C Ambient and suction gas temperature 32°C 32°C Liquid temperature 45°C 32°C

Fan cooling F2, 220V 50Hz

Accessories Devices FLig. FR8.5C S2tarting relay a0117U601 Cb0over 103N201 Starting capacitor 80 µFc117U501 5 Cd0ord relief 103N101 Mounting accessories Bolt joint for one compressor 118-1917 Bolt joint in quantities 118-1918 Snap-on in quantities 118-1919

2 CF.53.B1.02 February 2000

February 2000 CK.54.B5.02 13 SC-CL LBP/MBP Compressor R404A/R507 220-240V 50Hz

Data Sheet (Replaces CD.54.B4.02)

General Compressor SC10CL SC10CL 104L Application Code number 104L2523 R404A R507 Lilac stripe Application Approvals Application LBP/MBP Barcode on white background 2523 DANFOSS COMPRESSORS Evaporating temperature range °C -35 to -5 Yellow background 8296 Voltage range V/Hz 198 - 254 /50 Motor type CSIR

F2 = Fan cooling 3.0 m/s necessary Design Displacement cm3 10.29 Oil quantity cm3 600 Maximum refrigerant charge g 1300 Free gas vol. in compressor cm3 1410 Weight without electrical equipment kg 13.1 ø16 204 178 ø19 Motor 170 ø9.7 Motor size watt 315 LRA (rated after 4 sec. UL984) HST A 12.6 35 70 127 150

Cut-in current HST A 12.6 101.6 Resistance, main and start winding (25°C) Ω 6.7/11.8

Approvals EN60 335-1/335-2-34 §19.3 127 165 D 186 C Dimensions 218 Height mm A 209 E B203

B1 183 B A B1 B2 100 B2 Suction connector location/I.D. mm C 8.2 ±0.09

Process connector location/I.D. mm D 6.2 ±0.09 3

Discharge connector location/I.D. mm E 6.2 ±0.09 255 Compressors on a pallet pcs. 80 151 63 37° 37° 55 55 63

107 107 8258 115

February 2000 CF.54.A1.02 1

14 CK.54.B5.02 February 2000 Capacity (CECOMAF) watt C5omp.\°C -03 -53 -32 -023. -52 -01 -51 - S9C10CL 115 214 394 37 4559 599 714 92 c Capacity (ASHRAE) watt C5omp.\°C -03 -53 -32 -023. -52 -01 -51 - SC10CL 1085 278 329 454 543 659 877 107 b 8222 Power consumption watt C5omp.\°C -03 -53 -32 -023. -52 -01 -51 - a2 S1C10CL 204 209 364 35 3889 473 468 53 d Current consumption A C5omp.\°C -03 -53 -32 -023. -52 -01 -51 - SC10CL 19.84 15.9 20.1 22.2 20.3 20.5 20.7 2.9 c

10 11 COP (CECOMAF) W/W

C5omp.\°C -03 -53 -32 -023. -52 -01 -51 - 12 13 SC10CL 03.66 00.8 16.0 18.0 16.1 14.3 12.5 1.7 14

COP (ASHRAE) W/W Main winding Start winding C5omp.\°C -03 -53 -32 -023. -52 -01 -51 - Winding protector S7C10CL 07.7 07.9 14.1 17.2 18.3 10.5 11.8 2.0

Test conditions CECOMAF ASHRAE Condensing temperature 45°C 45°C Ambient and suction gas temperature 32°C 32°C Liquid temperature 45°C 32°C

Fan cooling F2, 220V 50Hz

Accessories Devices FLig. SC10C S2tarting relay a3117U600 Cb2over 103N200 Starting capacitor 80 µFc7117U501 Cd4ord relief 103N100 Mounting accessories Bolt joint for one compressor 118-1917 Bolt joint in quantities 118-1918 Snap-on in quantities 118-1919

2 CF.54.A1.02 February 2000

February 2000 CK.54.B5.02 15 SC-CL LBP/MBP Compressor R404A/R507 220-240V 50Hz

Data Sheet

General Compressor SC12CL SC12CL 104L Application Code number 104L2623 R404A R507 Lilac stripe Application Approvals Application LBP/MBP Barcode on white background 2623 DANFOSS COMPRESSORS Evaporating temperature range °C -45 to -5 Yellow background 8296-4 Voltage range V/Hz 198 - 254 /50 Motor type CSIR

F2 = Fan cooling 3.0 m/s necessary Design Displacement cm3 12.87 Oil quantity cm3 600 Maximum refrigerant charge g 1300 Free gas vol. in compressor cm3 1410 Weight without electrical equipment kg 12.5 ø16 204 178 ø19 Motor 170 ø9.7 Motor size watt 385 LRA (rated after 4 sec. UL984) HST A 14.8 35 70 127 150

Cut-in current HST A 14.8 101.6 Resistance, main and start winding (25°C) Ω 5.0/13.7

Approvals EN60 335-1/335-2-34 §19.3 127 165 D 186 C Dimensions 218 Height mm A 209 E B203

B1 183 B A B1 B2 100 B2 Suction connector location/I.D. mm C 8.2 ±0.09

Process connector location/I.D. mm D 6.2 ±0.09 3

Discharge connector location/I.D. mm E 6.2 ±0.09 255 Compressors on a pallet pcs. 80 151 63 37° 37° 55 55 63

107 107 8258 115

February 2000 CF.54.B1.02 1

16 CK.54.B5.02 February 2000 Capacity (CECOMAF) watt C5omp.\°C -04 -54 -03 -53 -32 -023. -52 -01 -51 - S5C12CL 78194 283 354 427 592 611 718 996 115 c Capacity (ASHRAE) watt C5omp.\°C -04 -54 -03 -53 -32 -023. -52 -01 -51 - S7C12CL 82187 257 430 585 620 722 931 1612 135 b 8222 Power consumption watt a2 C5omp.\°C -04 -54 -03 -53 -32 -023. -52 -01 -51 - S5C12CL 149 235 321 317 413 415 419 525 631 67 d

Current consumption A

C5omp.\°C -04 -54 -03 -53 -32 -023. -52 -01 -51 - c S2C12CL 21.0 28.2 25.3 22.5 28.7 21.7 21.9 36.1 34.3 3.6 10 11

COP (CECOMAF) W/W 12 13 14 C5omp.\°C -04 -54 -03 -53 -32 -023. -52 -01 -51 - S8C12CL 08.3 07.5 04.7 00.9 16.1 16.1 12.2 17.4 12.5 1.7

Main winding Start winding COP (ASHRAE) W/W Winding protector C5omp.\°C -04 -54 -03 -53 -32 -023. -52 -01 -51 - S5C12CL 08.4 09.6 09.8 18.0 15.2 17.3 15.4 14.6 11.8 2.0

Test conditions CECOMAF ASHRAE Condensing temperature 45°C 45°C Ambient and suction gas temperature 32°C 32°C Liquid temperature 45°C 32°C

Fan cooling F2, 220V 50Hz

Accessories Devices FLig. SC12C S2tarting relay a5117U600 Cb2over 103N200 Starting capacitor 80 µFc117U501 7 Cd4ord relief 103N100 Mounting accessories Bolt joint for one compressor 118-1917 Bolt joint in quantities 118-1918 Snap-on in quantities 118-1919

2 CF.54.B1.02 February 2000

February 2000 CK.54.B5.02 17 SC-CL LBP/MBP Compressor R404A/R507 220-240V 50Hz

Data Sheet

General Compressor SC15CL SC15CL 104L Application Code number 104L2853 R404A R507 Lilac stripe Application Approvals Application LBP/MBP Barcode on white background 2853 DANFOSS COMPRESSORS Evaporating temperature range °C -45 to -5 Yellow background 8296-5 Voltage range V/Hz 198 - 254 /50 Motor type CSIR

F2 = Fan cooling 3.0 m/s necessary Design Displacement cm3 15.28 Oil quantity cm3 600 Maximum refrigerant charge g 1300 Free gas vol. in compressor cm3 1460 Weight without electrical equipment kg 13.8 ø16 204 178 ø19 Motor 170 ø9.7 Motor size watt 495 LRA (rated after 4 sec. UL984) HST A 18.6 35 70 127 150

Cut-in current HST A 18.6 101.6 Resistance, main and start winding (25°C) Ω 3.7/14.1

Approvals EN60 335-1/335-2-34 §19.3 127 165 D 186 C Dimensions 218 Height mm A 219 E B213

B1 193 B A B1 B2 110 B2 Suction connector location/I.D. mm C 10.2 ±0.09

Process connector location/I.D. mm D 6.2 ±0.09 3

Discharge connector location/I.D. mm E 6.2 ±0.09 255 Compressors on a pallet pcs. 80 151 63 37° 37° 55 55 63

107 107 8258 115

February 2000 CF.54.C1.02 1

18 CK.54.B5.02 February 2000 Capacity (CECOMAF) watt C5omp.\°C -04 -54 -03 -53 -32 -023. -52 -01 -51 - S0C15CL 113 231 381 453 598 633 735 954 1915 138 c Capacity (ASHRAE) watt C5omp.\°C -04 -54 -03 -53 -32 -023. -52 -01 -51 - S1C15CL 155 244 306 511 658 784 817 1010 1535 162 b 8222 Power consumption watt a2 C5omp.\°C -04 -54 -03 -53 -32 -023. -52 -01 -51 - S1C15CL 255 391 357 424 551 503 598 694 711 79 d

Current consumption A

C5omp.\°C -04 -54 -03 -53 -32 -023. -52 -01 -51 - c S9C15CL 23.3 29.5 28.6 29.8 37.0 33.1 39.3 37.5 37.8 4.1 10 11

COP (CECOMAF) W/W 12 13 14 C5omp.\°C -04 -54 -03 -53 -32 -023. -52 -01 -51 - S2C15CL 07.5 03.6 08.8 04.9 10.1 10.2 15.3 11.4 16.6 1.7

Main winding Start winding COP (ASHRAE) W/W Winding protector C5omp.\°C -04 -54 -03 -53 -32 -023. -52 -01 -51 - S0C15CL 08.6 06.7 05.9 13.1 19.3 11.3 10.5 18.7 15.8 2.0

Test conditions CECOMAF ASHRAE Condensing temperature 45°C 45°C Ambient and suction gas temperature 32°C 32°C Liquid temperature 45°C 32°C

Fan cooling F2, 220V 50Hz

Accessories Devices FLig. SC15C S2tarting relay a9117U601 Cb2over 103N200 Starting capacitor 80 µFc117U501 7 Cd4ord relief 103N100 Mounting accessories Bolt joint for one compressor 118-1917 Bolt joint in quantities 118-1918 Snap-on in quantities 118-1919

2 CF.54.C1.02 February 2000

February 2000 CK.54.B5.02 19 SC-CL LBP/MBP Compressor R404A/R507 220-240V 50Hz

Data Sheet (Replaces CD.54.I2.02)

General Compressor SC18CL SC18CL 104L Application Code number 104L2123 R404A R507 Lilac stripe Application Approvals Application LBP/MBP Barcode on white background 2123 DANFOSS COMPRESSORS Evaporating temperature range °C -45 to -5 Yellow background 8296-3 Voltage range V/Hz 198 - 254 /50 Motor type CSR

F2 = Fan cooling 3.0 m/s necessary Design Displacement cm3 17.69 Oil quantity cm3 600 Maximum refrigerant charge g 1300 Free gas vol. in compressor cm3 1460 Weight without electrical equipment kg 13.7 ø16 204 178 ø19 Motor 170 ø9.7 Motor size watt 495 LRA (rated after 4 sec. UL984) HST A 20.0 35 70 127 150

Cut-in current HST A 20.0 101.6 Resistance, main and start winding (25°C) Ω 3.7/14.1

Approvals EN60 335-1/335-2-34 §19.3 127 165 D 186 C Dimensions 218 Height mm A 219 E B213

B1 193 B A B1 B2 110 B2 Suction connector location/I.D. mm C 10.2 ±0.09

Process connector location/I.D. mm D 6.2 ±0.09 3

Discharge connector location/I.D. mm E 6.2 ±0.09 255 Compressors on a pallet pcs. 80 151 63 37° 37° 55 55 63

107 107 8257 115

February 2000 CF.54.D1.02 1

20 CK.54.B5.02 February 2000 Capacity (CECOMAF) watt C5omp.\°C -04 -54 -03 -53 -32 -023. -52 -01 -51 - S6C18CL 126 226 358 512 639 715 858 1209 1333 159 a3

a2 e Capacity (ASHRAE) watt C5omp.\°C -04 -54 -03 -53 -32 -023. -52 -01 -51 - S3C18CL 159 340 414 651 880 877 1702 1627 1355 186 c

8227 Power consumption watt C5omp.\°C -04 -54 -03 -53 -32 -023. -52 -01 -51 - S7C18CL 381 367 414 532 620 623 699 738 859 100

d Current consumption A b C5omp.\°C -04 -54 -03 -53 -32 -023. -52 -01 -51 - Start winding e S3C18CL 25.5 25.6 20.8 31.1 32.4 36.5 37.7 41.1 48.6 5.0 5 2 Main winding a2

4 1 Bleeder resistance COP (CECOMAF) W/W Winding protector C5omp.\°C -04 -54 -03 -53 -32 -023. -52 -01 -51 - 11 22 c S2C18CL 09.5 06.6 01.8 15.0 19.1 17.1 19.2 19.3 19.4 1.5 N N L L a3

COP (ASHRAE) W/W M Fan C5omp.\°C -04 -54 -03 -53 -32 -023. -52 -01 -51 - Thermostat S1C18CL 01.6 00.8 17.0 14.1 19.3 18.3 12.4 14.6 15.7 1.8

Test conditions CECOMAF ASHRAE Condensing temperature 45°C 45°C Ambient and suction gas temperature 32°C 32°C Liquid temperature 45°C 32°C

Fan cooling F2, 220V 50Hz

Accessories Devices FLig. SC18C

Starting device 117-7012 (470 mm cable length) a3 117-7027 (550 mm cable length) 117-7040 (1000 mm cable length)

Cb2over 103N200 S2tarting relay a Components Starting capacitor 80 µFc of starting device Reun capacitor Cd4ord relief 103N100 Mounting accessories Bolt joint for one compressor 118-1917 Bolt joint in quantities 118-1918 Snap-on in quantities 118-1919

2 CF.54.D1.02 February 2000

February 2000 CK.54.B5.02 21 SC-CL LBP Compressor R404A/R507 220-240V 50Hz

Data Sheet

General Compressor SC21CL SC21CL 104L Application Code number 104L2322 R404A R507 Lilac stripe Application Approvals Application LBP Barcode on white background 2322 DANFOSS COMPRESSORS Evaporating temperature range °C -45 to -10 Yellow background 8296-2 Voltage range V/Hz 198 - 254 /50 Motor type CSR

F2 = Fan cooling 3.0 m/s necessary Design Displacement cm3 20.95 Oil quantity cm3 600 Maximum refrigerant charge g 1300 Free gas vol. in compressor cm3 1460 Weight without electrical equipment kg 14.0 ø16 204 178 ø19 Motor 170 ø9.7 Motor size watt 590 LRA (rated after 4 sec. UL984) HST A 23.4 35 70 127 150

Cut-in current HST A 23.4 101.6 Resistance, main and start winding (25°C) Ω 3.4/14.4

Approvals EN60 335-1/335-2-34 §19.3 127 165 D 186 C Dimensions 218 Height mm A 219 E B213

B1 193 B A B1 B2 110 B2 Suction connector location/I.D. mm C 10.2 ±0.09

Process connector location/I.D. mm D 6.2 ±0.09 3

Discharge connector location/I.D. mm E 6.2 ±0.09 255 Compressors on a pallet pcs. 80 151 63 37° 37° 55 55 63

107 107 8257 115

February 2000 CF.54.E1.02 1

22 CK.54.B5.02 February 2000 Capacity (CECOMAF) watt C5omp.\°C -04 -54 -03 -53 -32 -023. -52 -01 -1 S6C21CL 252 352 475 631 871 828 1604 1630 160 a3

Capacity (ASHRAE) watt a2 e C5omp.\°C -04 -54 -03 -53 -32 -023. -52 -01 -1 S3C21CL 286 397 592 771 934 1503 1421 1652 187 c

8227 Power consumption watt C5omp.\°C -04 -54 -03 -53 -32 -023. -52 -01 -1 S0C21CL 420 446 553 621 730 753 719 899 98

Current consumption A d C5omp.\°C -04 -54 -03 -53 -32 -023. -52 -01 -1 b S0C21CL 23.4 24.6 21.9 31.3 36.7 34.8 48.1 40.5 5.0 Start winding e

5 2 a2 COP (CECOMAF) W/W Main winding 4 1 Bleeder resistance C5omp.\°C -04 -54 -03 -53 -32 -023. -52 -01 -1 Winding protector S7C21CL 00.5 05.7 00.8 16.0 11.1 11.2 17.3 12.4 1.6 11 22 c N N L L COP (ASHRAE) W/W a3 C5omp.\°C -04 -54 -03 -53 -32 -023. -52 -01 -1 M S6C21CL 02.6 09.8 07.9 15.1 11.3 13.4 11.5 10.7 1.9 Thermostat Fan

Test conditions CECOMAF ASHRAE Condensing temperature 45°C 45°C Ambient and suction gas temperature 32°C 32°C Liquid temperature 45°C 32°C

Fan cooling F2, 220V 50Hz

Accessories Devices FLig. SC21C

Starting device 117-7012 (470 mm cable length) a3 117-7027 (550 mm cable length) 117-7040 (1000 mm cable length)

2 CF.54.E1.02 February 2000

February 2000 CK.54.B5.02 23 SC-CL LBP/MBP Twin Compressor R404A/R507 220-240V 50Hz

Data Sheet (Replaces CD.54.C2.02)

General Compressor SC10/10CL SC10/10CL 104L Application Code number 104L4087 R404A R507 Application Lilac stripe Approvals Application LBP/MBP Barcode on white background 4087 Evaporating temperature range °C -35 to -5 DANFOSS COMPRESSORS Yellow background 8297 Voltage range V/Hz 198 - 254 /50 Motor type CSIR Max. ambient temperature °C 38 S = Static cooling normally sufficient O = Oil cooling Comp. cooling at ambient temp. 32°C F2 F1 = Fan cooling 1.5 m/s 38°C F (compressor compartment temperature 2 equal to ambient temperature)

F2 = Fan cooling 3.0 m/s necessary Design Displacement cm3 2 x 10.29 Oil quantity cm3 1220 Maximum refrigerant charge g 2200

Free gas vol. in compressor cm 2820 127 Weight without electrical equipment kg 26.3

Motor 100 Motor size watt 2 x 315 127 ø16 175 LRA (rated after 4 sec. UL984) HST* A 12.6 D 302 Cut-in current HST* A 12.6 C Resistance, main and start winding (25°C) Ω 6.7/11.8 Approvals EN60 335-1/335-2-34 §19.3 * Operational current for the second compressor time-delayed.

Dimensions A B B1 Height mm A 249 B2 B244 B1 183 8260 B2 100 1"-14 UNF E Suction connector Service valve location/I.D. mm C 12 Solder connector location/I.D. mm C 12 Process connector location/I.D. mm D 6.2 ±0.09 Discharge connector location/I.D. mm E 6.2 ±0.09

Compressors on a pallet pcs. 18 320

326

February 2000 CF.54.F1.02 1

24 CK.54.B5.02 February 2000 Capacity (CECOMAF) watt C5omp.\°C -03 -53 -32 -023. -52 -01 -51 - S8C10/10CL 321 428 688 785 901 1819 1249 184

Starting relay Starting capacitor

10 11 10 11 Capacity (ASHRAE) watt 12 13 12 13 Start winding Main winding C5omp.\°C -03 -53 -32 -023. -52 -01 -51 - 14 Winding 14 protector S0C10/10CL 317 546 739 808 1807 1038 1575 215 1 1 11

2 2 2 2 1933 N N N N L L L L Power consumption watt

21 3 Blue C5omp.\°C -03 -53 -32 -023. -52 -01 -51 - Black Brown S2C10/10CL 408 598 637 781 777 857 927 107 M Thermostat Time delay relay Fan Thermostat 2 Safety pressure control Current consumption A C5omp.\°C -03 -53 -32 -023. -52 -01 -51 - Remove wire L-1 if time delay is used Remove wire 1-2 if thermostat 2 is used S8C10/10CL 37.6 39.9 41.2 44.4 41.6 50.0 50.4 5.8

COP (CECOMAF) W/W C5omp.\°C -03 -53 -32 -023. -52 -01 -51 - S6C10/10CL 03.6 00.8 16.0 18.0 16.1 14.3 12.5 1.7 service valve

seal ring COP (ASHRAE) W/W C5omp.\°C -03 -53 -32 -023. -52 -01 -51 - S7C10/10CL 07.7 07.9 14.1 17.2 18.3 10.5 11.8 2.0

Test conditions CECOMAF ASHRAE seal ring Condensing temperature 45°C 45°C Ambient and suction gas temperature 32°C 32°C Liquid temperature 45°C 32°C 8214 Fan cooling F2, 220V 50Hz

solder connector

Accessories Devices pLcs. SC10/10C S23tarting relay 117U600 Starting capacitor 80 µF2117U501 7 C22over 103N200 C24ord relief 103N100 Time-delay relay 1 117N0001 Check valve 2 020-1014 (to be used with time-delay relay) 118-7350 S1ervice valve (12 mm)

104B0584 S1older connector (12 mm)

Seal ring for service valve 18118-363 and solder connector

Mounting accessories Bolt joint for one compressor 27118-191 Bolt joint in quantities 118-1918

2 CF.54.F1.02 February 2000

February 2000 CK.54.B5.02 25 SC-CL LBP/MBP Twin Compressor R404A/R507 220-240V 50Hz

Data Sheet

General Compressor SC12/12CL SC12/12CL 104L Application Code number 104L4088 R404A R507 Application Lilac stripe Approvals Application LBP/MBP Barcode on white background 4088 Evaporating temperature range °C -45 to -5 DANFOSS COMPRESSORS Yellow background 8297-4 Voltage range V/Hz 198 - 254 /50 Motor type CSIR Max. ambient temperature °C 38 S = Static cooling normally sufficient O = Oil cooling Comp. cooling at ambient temp. 32°C F2 F1 = Fan cooling 1.5 m/s 38°C F (compressor compartment temperature 2 equal to ambient temperature)

F2 = Fan cooling 3.0 m/s necessary Design Displacement cm3 2 x 12.87 Oil quantity cm3 1220 Maximum refrigerant charge g 2200

Free gas vol. in compressor cm 2820 127 Weight without electrical equipment kg 27.3

Motor 100 Motor size watt 2 x 385 127 ø16 175 LRA (rated after 4 sec. UL984) HST* A 14.8 D 302 Cut-in current HST* A 14.8 C Resistance, main and start winding (25°C) Ω 5.0/13.7 Approvals EN60 335-1/335-2-34 §19.3 * Operational current for the second compressor time-delayed.

Compressors on a pallet pcs. 18 320

326

February 2000 CF.54.G1.02 1

26 CK.54.B5.02 February 2000 Capacity (CECOMAF) watt C5omp.\°C -04 -54 -03 -53 -32 -023. -52 -01 -51 - S0C12/12CL 175 299 467 609 945 1804 1323 1256 1892 231

Capacity (ASHRAE) watt C5omp.\°C -04 -54 -03 -53 -32 -023. -52 -01 -51 - S4C12/12CL 157 374 515 861 1610 1421 1344 1682 2124 271

Power consumption watt C5omp.\°C -04 -54 -03 -53 -32 -023. -52 -01 -51 - S0C12/12CL 389 550 632 724 836 920 928 1410 1622 134

Current consumption A C5omp.\°C -04 -54 -03 -53 -32 -023. -52 -01 -51 - S4C12/12CL 42.0 46.4 40.7 54.1 56.4 51.5 53.8 61.2 68.7 7.2

COP (CECOMAF) W/W C5omp.\°C -04 -54 -03 -53 -32 -023. -52 -01 -51 - S8C12/12CL 08.3 07.5 04.7 00.9 16.1 16.1 12.2 17.4 12.5 1.7

COP (ASHRAE) W/W C5omp.\°C -04 -54 -03 -53 -32 -023. -52 -01 -51 - S5C12/12CL 08.4 09.6 09.8 18.0 15.2 17.3 15.4 14.6 11.8 2.0

Test conditions CECOMAF ASHRAE Condensing temperature 45°C 45°C Ambient and suction gas temperature 32°C 32°C Starting relay Starting capacitor

Liquid temperature 45°C 32°C 10 11 10 11 12 13 12 13 Fan cooling F , 220V 50Hz Start winding 2 Main winding 14 Winding 14 protector

1 1 11

2 2 2 2 1933 N N N N L L L L

Accessories 21 3 Blue Black Brown Devices pLcs. SC12/12C M Thermostat Time delay relay S25tarting relay 117U600 Fan Thermostat 2 Safety pressure control Starting capacitor 80 µF2117U501 7 Remove wire L-1 if time delay is used Remove wire 1-2 if thermostat 2 is used C22over 103N200 C24ord relief 103N100 Time-delay relay 1 117N0001 service valve Check valve 2 020-1014 (to be used with time-delay relay) seal ring 118-7350 S1ervice valve (12 mm)

104B0584 S1older connector (12 mm) seal ring

Seal ring for service valve 18118-363 and solder connector 8214

Mounting accessories solder connector Bolt joint for one compressor 27118-191 Bolt joint in quantities 118-1918

2 CF.54.G1.02 February 2000

February 2000 CK.54.B5.02 27 SC-CL LBP/MBP Twin Compressor R404A/R507 220-240V 50Hz

Data Sheet

General Compressor SC15/15CL SC15/15CL 104L Application Code number 104L4089 R404A R507 Application Lilac stripe Approvals Application LBP/MBP Barcode on white background 4089 Evaporating temperature range °C -45 to -5 DANFOSS COMPRESSORS Yellow background 8297-5 Voltage range V/Hz 198 - 254 /50 Motor type CSIR Max. ambient temperature °C 38 S = Static cooling normally sufficient O = Oil cooling Comp. cooling at ambient temp. 32°C F2 F1 = Fan cooling 1.5 m/s 38°C F (compressor compartment temperature 2 equal to ambient temperature)

F2 = Fan cooling 3.0 m/s necessary Design Displacement cm3 2 x 15.28 Oil quantity cm3 1220 Maximum refrigerant charge g 2200

Free gas vol. in compressor cm 2920 127 Weight without electrical equipment kg 29.1

Motor 100 Motor size watt 2 x 495 127 ø16 175 LRA (rated after 4 sec. UL984) HST* A 18.6 D 302 Cut-in current HST* A 18.6 C Resistance, main and start winding (25°C) Ω 3.7/14.1 Approvals EN60 335-1/335-2-34 §19.3 * Operational current for the second compressor time-delayed.

Dimensions A B B1 Height mm A 259 B2 B254 B1 193 8260 B2 110 1"-14 UNF E Suction connector Service valve location/I.D. mm C 12 Solder connector location/I.D. mm C 12 Process connector location/I.D. mm D 6.2 ±0.09 Discharge connector location/I.D. mm E 6.2 ±0.09

Compressors on a pallet pcs. 18 320

326

February 2000 CF.54.H1.02 1

28 CK.54.B5.02 February 2000 Capacity (CECOMAF) watt C5omp.\°C -04 -54 -03 -53 -32 -023. -52 -01 -51 - S0C15/15CL 216 472 662 897 1916 1627 1650 1088 2831 277

Capacity (ASHRAE) watt C5omp.\°C -04 -54 -03 -53 -32 -023. -52 -01 -51 - S2C15/15CL 300 499 792 1601 1032 1649 1175 2920 2969 324

Power consumption watt C5omp.\°C -04 -54 -03 -53 -32 -023. -52 -01 -51 - S2C15/15CL 590 682 705 839 1902 1906 1815 1929 1243 158

Current consumption A C5omp.\°C -04 -54 -03 -53 -32 -023. -52 -01 -51 - S8C15/15CL 45.7 58.0 56.3 59.7 65.1 66.3 69.6 75.1 74.7 8.3

COP (CECOMAF) W/W C5omp.\°C -04 -54 -03 -53 -32 -023. -52 -01 -51 - S2C15/15CL 07.5 03.6 08.8 04.9 10.1 10.2 15.3 11.4 16.6 1.7

COP (ASHRAE) W/W C5omp.\°C -04 -54 -03 -53 -32 -023. -52 -01 -51 - S0C15/15CL 08.6 06.7 05.9 13.1 19.3 11.3 10.5 18.7 15.8 2.0

Test conditions CECOMAF ASHRAE Condensing temperature 45°C 45°C Ambient and suction gas temperature 32°C 32°C Starting relay Starting capacitor

Liquid temperature 45°C 32°C 10 11 10 11 12 13 12 13 Fan cooling F , 220V 50Hz Start winding 2 Main winding 14 Winding 14 protector

1 1 11

2 2 2 2 1933 N N N N L L L L

Accessories 21 3 Blue Black Brown Devices pLcs. SC15/15C M Thermostat Time delay relay S29tarting relay 117U601 Fan Thermostat 2 Safety pressure control Starting capacitor 80 µF2117U501 7 Remove wire L-1 if time delay is used Remove wire 1-2 if thermostat 2 is used C22over 103N200 C24ord relief 103N100 Time-delay relay 1 117N0001 service valve Check valve 2 020-1014 (to be used with time-delay relay) seal ring 118-7350 S1ervice valve (12 mm)

104B0584 S1older connector (12 mm) seal ring

Seal ring for service valve 18118-363 and solder connector 8214

Mounting accessories solder connector Bolt joint for one compressor 27118-191 Bolt joint in quantities 118-1918

2 CF.54.H1.02 February 2000

February 2000 CK.54.B5.02 29 SC-CL LBP/MBP Twin Compressor R404A/R507 220-240V 50Hz

Data Sheet (Replaces CD.54.F3.02)

General Compressor SC18/18CL SC18/18CL 104L Application Code number 104L4090 R404A R507 Application Lilac stripe Approvals Application LBP/MBP Barcode on white background 4090 Evaporating temperature range °C -45 to -5 DANFOSS COMPRESSORS Yellow background 8297-2 Voltage range V/Hz 198 - 254 /50 Motor type CSR Max. ambient temperature °C 38 S = Static cooling normally sufficient O = Oil cooling Comp. cooling at ambient temp. 32°C F2 F1 = Fan cooling 1.5 m/s 38°C F (compressor compartment temperature 2 equal to ambient temperature)

F2 = Fan cooling 3.0 m/s necessary Design Displacement cm3 2 x 17.69 Oil quantity cm3 1220 Maximum refrigerant charge g 2200

Free gas vol. in compressor cm 2920 127 Weight without electrical equipment kg 29.1

Motor 100 Motor size watt 2 x 495 127 ø16 175 LRA (rated after 4 sec. UL984) HST* A 20.0 D 302 Cut-in current HST* A 20.0 C Resistance, main and start winding (25°C) Ω 3.7/14.1 Approvals EN60 335-1/335-2-34 §19.3 * Operational current for the second compressor time-delayed.

Dimensions A B B1 Height mm A 259 B2 B254 B1 193 8265 B2 110 1"-14 UNF E Suction connector Service valve location/I.D. mm C 16 Solder connector location/I.D. mm C 16 Process connector location/I.D. mm D 6.2 ±0.09 Discharge connector location/I.D. mm E 6.2 ±0.09

Compressors on a pallet pcs. 18 320

326

February 2000 CF.54.I1.02 1

30 CK.54.B5.02 February 2000 Capacity (CECOMAF) watt C5omp.\°C -04 -54 -03 -53 -32 -023. -52 -01 -51 - S2C18/18CL 353 542 706 1305 1738 1350 1976 2418 2666 318

Capacity (ASHRAE) watt C5omp.\°C -04 -54 -03 -53 -32 -023. -52 -01 -51 - S6C18/18CL 308 691 828 1122 1561 1575 2505 2255 3711 372

Power consumption watt C5omp.\°C -04 -54 -03 -53 -32 -023. -52 -01 -51 - S4C18/18CL 653 715 819 1504 1520 1426 1838 1657 1078 201

Current consumption A C5omp.\°C -04 -54 -03 -53 -32 -023. -52 -01 -51 - S6C18/18CL 51.0 59.3 50.6 61.2 65.8 73.0 73.5 81.3 96.2 10.1

COP (CECOMAF) W/W C5omp.\°C -04 -54 -03 -53 -32 -023. -52 -01 -51 - S2C18/18CL 09.5 06.6 01.8 15.0 19.1 17.1 19.2 19.3 19.4 1.5

COP (ASHRAE) W/W C5omp.\°C -04 -54 -03 -53 -32 -023. -52 -01 -51 - S1C18/18CL 01.6 00.8 17.0 14.1 19.3 18.3 12.4 14.6 15.7 1.8

Test conditions CECOMAF ASHRAE Winding protector Condensing temperature 45°C 45°C Starting capacitor Main winding Starting relay Run capacitor Ambient and suction gas temperature 32°C 32°C Start winding Bleeder resistance Liquid temperature 45°C 32°C

5 2 Fan cooling F2, 220V 50Hz 5 2

4 1 4 1

1 1 1 1

22 2 2 1932 N N NN L L L L Accessories Blue Black Brown Devices pLcs. SC18/18C M Fan Time delay relay Starting device 117-7012 (470 mm cable length) Thermostat Thermostat 2 2 Safety pressure control 117-7027 (550 mm cable length) Remove wire L-1 if time delay is used Remove wire 1-2 if thermostat 2 is used C22over 103N200 C24ord relief 103N100 Time-delay relay 1 117N0001 service valve Check valve 2 020-1014 (to be used with time-delay relay) seal ring 118-7351 S1ervice valve (16 mm)

118-7405 S1older connector (16 mm) seal ring

Seal ring for service valve 18118-363 and solder connector 8214

Mounting accessories solder connector Bolt joint for one compressor 27118-191 Bolt joint in quantities 118-1918

2 CF.54.I1.02 February 2000

February 2000 CK.54.B5.02 31 SC-CL LBP Twin Compressor R404A/R507 220-240V 50Hz

Data Sheet

General Compressor SC21/21CL SC21/21CL 104L Application Code number 104L4094 R404A R507 Application Lilac stripe Approvals Application LBP Barcode on white background 4094 Evaporating temperature range °C -45 to -10 DANFOSS COMPRESSORS Yellow background 8297-3 Voltage range V/Hz 198 - 254 /50 Motor type CSR Max. ambient temperature °C 38 S = Static cooling normally sufficient O = Oil cooling Comp. cooling at ambient temp. 32°C F2 F1 = Fan cooling 1.5 m/s 38°C F (compressor compartment temperature 2 equal to ambient temperature)

F2 = Fan cooling 3.0 m/s necessary Design Displacement cm3 2 x 20.95 Oil quantity cm3 1220 Maximum refrigerant charge g 2200

Free gas vol. in compressor cm 2920 127 Weight without electrical equipment kg 29.1

Motor 100 Motor size watt 2 x 590 127 ø16 175 LRA (rated after 4 sec. UL984) HST* A 23.4 D 302 Cut-in current HST* A 23.4 C Resistance, main and start winding (25°C) Ω 3.4/14.4 Approvals EN60 335-1, EN60 335-2-34 §19.3 * Operational current for the second compressor time-delayed.

Compressors on a pallet pcs. 18 320

326

February 2000 CF.54.J1.02 1

32 CK.54.B5.02 February 2000 Capacity (CECOMAF) watt C5omp.\°C -04 -54 -03 -53 -32 -023. -52 -01 -1 S2C21/21CL 405 605 951 1623 1462 1477 2308 2361 321

Capacity (ASHRAE) watt C5omp.\°C -04 -54 -03 -53 -32 -023. -52 -01 -1 S5C21/21CL 552 795 1705 1343 1889 2006 2943 3304 375

Power consumption watt C5omp.\°C -04 -54 -03 -53 -32 -023. -52 -01 -1 S9C21/21CL 749 982 1006 1423 1640 1946 1258 1878 197

Current consumption A C5omp.\°C -04 -54 -03 -53 -32 -023. -52 -01 -1 S0C21/21CL 47.8 58.2 51.8 62.6 71.4 78.7 85.2 99.1 9.9

COP (CECOMAF) W/W C5omp.\°C -04 -54 -03 -53 -32 -023. -52 -01 -1 S7C21/21CL 00.5 05.7 00.8 16.0 11.1 11.2 17.3 12.4 1.6

COP (ASHRAE) W/W C5omp.\°C -04 -54 -03 -53 -32 -023. -52 -01 -1 S6C21/21CL 02.6 09.8 07.9 15.1 11.3 13.4 11.5 10.7 1.9

5 2 Fan cooling F2, 220V 50Hz 5 2

4 1 4 1

1 1 1 1

22 2 2 1932 N N NN L L L L Accessories Blue Black Brown Devices pLcs. SC21/21C M Fan Time delay relay Starting device 117-7012 (470 mm cable length) Thermostat Thermostat 2 2 Safety pressure control 117-7027 (550 mm cable length) Remove wire L-1 if time delay is used Remove wire 1-2 if thermostat 2 is used C22over 103N200 C24ord relief 103N100 Time-delay relay 1 117N0001 service valve Check valve 2 020-1014 (to be used with time-delay relay) seal ring 118-7351 S1ervice valve (16 mm)

118-7405 S1older connector (16 mm) seal ring

Seal ring for service valve 18118-363 and solder connector 8214

Mounting accessories solder connector Bolt joint for one compressor 27118-191 Bolt joint in quantities 118-1918

2 CF.54.J1.02 February 2000

February 2000 CK.54.B5.02 33 TL-DL MBP/HBP Compressor R404A/R507 220-240V 50Hz

Data Sheet (Replaces CD.51.C3.02)

General Compressor TL4DL TL4DL 102U Application Code number 102U2038 R404A R507 Lilac stripe Application Approvals Application MBP/HBP Barcode on white background 2038 DANFOSS COMPRESSORS Evaporating temperature range °C -20 to 10 Yellow background 8298 Voltage range V/Hz 198 - 254 /50 Motor type CSIR

F2 = Fan cooling 3.0 m/s necessary Design Displacement cm3 3.86 Oil quantity cm3 280 Maximum refrigerant charge g 600 Free gas vol. in compressor cm3 1690 Weight without electrical equipment kg 7.5

ø16 Motor Motor size watt 175 LRA (rated after 4 sec. UL984) HST A 7.5 70 35 100 Cut-in current HST A 7.5 Ω Resistance, main and start winding (25°C) 12.0/20.0 ø9 Approvals EN60 335-1/335-2-34 §19.3 170 178 186 C 204 D Dimensions or or 222 Height mm A 173 D 176 C B169 E

31.5°

Suction connector location/I.D. mm C 6.2 ±0.09 28°

30° Process connector location/I.D. mm D 6.2 ±0.09 A B Discharge connector location/I.D. mm E 5.0 +0.12/+0.20 107 105 105 Compressors on a pallet pcs. 125

8263 157

45° 20° 60.5 29 66

51° 71

102 96 117

February 2000 CF.52.B1.02 1

34 CK.54.B5.02 February 2000 Capacity (CECOMAF) watt C0omp.\°C -52 -01 -51 -05270. 1 T6L4DL 199 212 298 324 473 522 517 63 c Capacity (ASHRAE) watt C0omp.\°C -52 -01 -51 -05270. 1 T9L4DL 272 286 392 460 590 621 627 74 b Power consumption watt 8219 C0omp.\°C -52 -01 -51 -05270. 1 a2 T9L4DL 166 138 210 292 263 235 226 27

d Current consumption A C0omp.\°C -52 -01 -51 -05270. 1 T2L4DL 18.2 14.2 11.3 17.4 14.4 16.5 10.5 1.6 c

10 11 COP (CECOMAF) W/W

C0omp.\°C -52 -01 -51 -05270. 1 12 13 T6L4DL 13.1 18.2 18.3 11.5 16.8 27.0 22.1 2.3 14

COP (ASHRAE) W/W Main winding Start winding C0omp.\°C -52 -01 -51 -05270. 1 Winding protector T6L4DL 14.3 11.4 15.6 12.8 22.1 25.4 23.5 2.7

Test conditions CECOMAF ASHRAE Condensing temperature 45°C 45°C Ambient and suction gas temperature 32°C 32°C Liquid temperature 45°C 32°C

Fan cooling F2, 220V 50Hz

Accessories Devices FLig. TL4D S2tarting relay a1117U600 Cb0over 103N201 Starting capacitor 60 µFc117U501 4 Cd0ord relief 103N101 Mounting accessories Bolt joint for one compressor 118-1917 Bolt joint in quantities 118-1918 Snap-on in quantities 118-1919

2 CF.52.B1.02 February 2000

February 2000 CK.54.B5.02 35 FR-DL MBP/HBP Compressor R404A/R507 220-240V 50Hz

Data Sheet (Replaces CD.53.B4.02)

General Compressor FR6DL FR6DL 103U Application Code number 103U2680 R404A R507 Lilac stripe Application Approvals Application MBP/HBP Barcode on white background 2680 DANFOSS COMPRESSORS Evaporating temperature range °C -20 to 15 Yellow background 8299 Voltage range V/Hz 198 - 254 /50 Motor type CSIR

F2 = Fan cooling 3.0 m/s necessary Design Displacement cm3 6.23 Oil quantity cm3 450 Maximum refrigerant charge g 850 Free gas vol. in compressor cm3 1350 Weight without electrical equipment kg 10.5 204 ø16 ø19 178 Motor Motor size watt 275 LRA (rated after 4 sec. UL984) HST A 10.0 70 35 127 150 60.5 Cut-in current HST A 10.0 101.6 Resistance, main and start winding (25°C) Ω 7.3/12.0 ø9.7 Approvals EN60 335-1/335-2-34 §19.3 127 165 170 186 Dimensions D 200 C Height mm A 196 E B191 30° Suction connector location/I.D. mm C 8.2 ±0.09 30° 25° A B Process connector location/I.D. mm D 6.2 ±0.09 130 Discharge connector location/I.D. mm E 6.2 ±0.09 127 102 Compressors on a pallet pcs. 80

243 8253 ° 24°

156 40 40° 32 55 55

122.5 124.5 127.5

February 2000 CF.53.C1.02 1

36 CK.54.B5.02 February 2000 Capacity (CECOMAF) watt C0omp.\°C -52 -01 -51 -05270. 151 F7R6DL 351 318 467 587 609 874 990 979 117 c Capacity (ASHRAE) watt C0omp.\°C -52 -01 -51 -05270. 151 F0R6DL 397 404 535 687 861 958 1606 1917 138 b Power consumption watt 8219 C0omp.\°C -52 -01 -51 -05270. 151 a2 F0R6DL 219 342 385 338 462 495 456 498 50

d Current consumption A C0omp.\°C -52 -01 -51 -05270. 151 F1R6DL 19.9 10.9 23.1 27.2 21.3 26.5 22.5 20.6 2.7 c

10 11 COP (CECOMAF) W/W

C0omp.\°C -52 -01 -51 -05270. 151 12 13 F9R6DL 10.0 13.2 18.3 15.4 14.6 13.8 16.9 21.0 2.3 14

COP (ASHRAE) W/W Main winding Start winding C0omp.\°C -52 -01 -51 -05270. 151 Winding protector F7R6DL 10.2 16.4 13.5 14.7 16.9 27.1 22.2 23.4 2.7

Test conditions CECOMAF ASHRAE Condensing temperature 45°C 45°C Ambient and suction gas temperature 32°C 32°C Liquid temperature 45°C 32°C

Fan cooling F2, 220V 50Hz

Accessories Devices FLig. FR6D S2tarting relay a0117U601 Cb0over 103N201 Starting capacitor 80 µFc117U501 5 Cd0ord relief 103N101 Mounting accessories Bolt joint for one compressor 118-1917 Bolt joint in quantities 118-1918 Snap-on in quantities 118-1919

2 CF.53.C1.02 February 2000

February 2000 CK.54.B5.02 37 SC-DL MBP/HBP Compressor R404A/R507 220-240V 50Hz

Data Sheet (Replaces CD.54.A3.02)

General Compressor SC10DL SC10DL 104L Application Code number 104L2525 R404A R507 Lilac stripe Application Approvals Application MBP/HBP Barcode on white background 2525 DANFOSS COMPRESSORS Evaporating temperature range °C -20 to 10 Yellow background 8306 Voltage range V/Hz 198 - 254 /50 Motor type CSIR

F2 = Fan cooling 3.0 m/s necessary Design Displacement cm3 10.29 Oil quantity cm3 600 Maximum refrigerant charge g 1300 Free gas vol. in compressor cm3 1410 Weight without electrical equipment kg 13.1 ø16 204 178 ø19 Motor 170 ø9.7 Motor size watt 385 LRA (rated after 4 sec. UL984) HST A 14.8 35 70 127 150

Cut-in current HST A 14.8 101.6 Resistance, main and start winding (25°C) Ω 5.0/13.7

Approvals EN60 335-1/335-2-34 §19.3 127 165 D 186 C Dimensions 218 Height mm A 209 E B203

B1 183 B A B1 B2 100 B2 Suction connector location/I.D. mm C 8.2 ±0.09

Process connector location/I.D. mm D 6.2 ±0.09 3

Discharge connector location/I.D. mm E 6.2 ±0.09 255 Compressors on a pallet pcs. 80 151 63 37° 37° 55 55 63

107 107 8258 115

February 2000 CF.54.K1.02 1

38 CK.54.B5.02 February 2000 Capacity (CECOMAF) watt C0omp.\°C -52 -01 -51 -05270. 1 S8C10DL 428 622 798 936 1318 1742 1953 168 c Capacity (ASHRAE) watt C0omp.\°C -52 -01 -51 -05270. 1 S9C10DL 566 742 941 113 10386 1667 1880 198 b 8222 Power consumption watt C0omp.\°C -52 -01 -51 -05270. 1 a2 S4C10DL 319 425 570 54 5986 611 653 64 d Current consumption A C0omp.\°C -52 -01 -51 -05270. 1 S5C10DL 27.5 27.7 24.9 3.1 33.30 39.4 35.4 3.5 c

10 11 COP (CECOMAF) W/W

C0omp.\°C -52 -01 -51 -05270. 1 12 13 S4C10DL 18.2 16.3 17.5 12.7 20.0 24.3 22.4 2.6 14

COP (ASHRAE) W/W Main winding Start winding C0omp.\°C -52 -01 -51 -05270. 1 Winding protector S4C10DL 11.4 12.6 17.8 2.0 20.36 26.7 28.8 3.0

Test conditions CECOMAF ASHRAE Condensing temperature 45°C 45°C Ambient and suction gas temperature 32°C 32°C Liquid temperature 45°C 32°C

Fan cooling F2, 220V 50Hz

Accessories Devices FLig. SC10D S2tarting relay a5117U600 Cb2over 103N200 Starting capacitor 80 µFc7117U501 Cd4ord relief 103N100 Mounting accessories Bolt joint for one compressor 118-1917 Bolt joint in quantities 118-1918 Snap-on in quantities 118-1919

2 CF.54.K1.02 February 2000

February 2000 CK.54.B5.02 39 SC-DL MBP/HBP Compressor R404A/R507 220-240V 50Hz

Data Sheet

General Compressor SC12DL SC12DL 104L Application Code number 104L2625 R404A R507 Lilac stripe Application Approvals Application MBP/HBP Barcode on white background 2625 DANFOSS COMPRESSORS Evaporating temperature range °C -20 to 10 Yellow background 8306-3 Voltage range V/Hz 198 - 254 /50 Motor type CSIR

F2 = Fan cooling 3.0 m/s necessary Design Displacement cm3 12.87 Oil quantity cm3 600 Maximum refrigerant charge g 1300 Free gas vol. in compressor cm3 1460 Weight without electrical equipment kg 13.6 ø16 204 178 ø19 Motor 170 ø9.7 Motor size watt 495 LRA (rated after 4 sec. UL984) HST A 18.6 35 70 127 150

Cut-in current HST A 18.6 101.6 Resistance, main and start winding (25°C) Ω 3.7/14.1

Approvals EN60 335-1/335-2-34 §19.3 127 165 D 186 C Dimensions 218 Height mm A 219 E B213

B1 193 B A B1 B2 110 B2 Suction connector location/I.D. mm C 10.2 ±0.09

Process connector location/I.D. mm D 6.2 ±0.09 3

Discharge connector location/I.D. mm E 6.2 ±0.09 255 Compressors on a pallet pcs. 80 151 63 37° 37° 55 55 63

107 107 8258 115

February 2000 CF.54.L1.02 1

40 CK.54.B5.02 February 2000 Capacity (CECOMAF) watt C0omp.\°C -52 -01 -51 -05270. 1 S5C12DL 586 723 964 1017 1444 1373 1887 205 c Capacity (ASHRAE) watt C0omp.\°C -52 -01 -51 -05270. 1 S9C12DL 615 806 1510 137 16687 2103 2220 242 b 8222 Power consumption watt C0omp.\°C -52 -01 -51 -05270. 1 a2 S5C12DL 418 564 509 65 7503 775 757 80 d Current consumption A C0omp.\°C -52 -01 -51 -05270. 1 S2C12DL 34.2 36.4 38.6 3.8 48.09 45.2 44.3 4.4 c

10 11 COP (CECOMAF) W/W

C0omp.\°C -52 -01 -51 -05270. 1 12 13 S6C12DL 16.1 18.3 11.5 15.8 20.0 21.3 26.4 2.5 14

COP (ASHRAE) W/W Main winding Start winding C0omp.\°C -52 -01 -51 -05270. 1 Winding protector S6C12DL 19.3 15.5 12.8 2.1 20.40 23.7 21.8 3.0

Test conditions CECOMAF ASHRAE Condensing temperature 45°C 45°C Ambient and suction gas temperature 32°C 32°C Liquid temperature 45°C 32°C

Fan cooling F2, 220V 50Hz

Accessories Devices FLig. SC12D S2tarting relay a9117U601 Cb2over 103N200 Starting capacitor 80 µFc7117U501 Cd4ord relief 103N100 Mounting accessories Bolt joint for one compressor 118-1917 Bolt joint in quantities 118-1918 Snap-on in quantities 118-1919

2 CF.54.L1.02 February 2000

February 2000 CK.54.B5.02 41 SC-DL MBP/HBP Compressor R404A/R507 220-240V 50Hz

Data Sheet

General Compressor SC15DL SC15DL 104L Application Code number 104L2856 R404A R507 Lilac stripe Application Approvals Application MBP/HBP Barcode on white background 2856 DANFOSS COMPRESSORS Evaporating temperature range °C -20 to 10 Yellow background 8306-5 Voltage range V/Hz 198 - 254 /50 Motor type CSR

F2 = Fan cooling 3.0 m/s necessary Design Displacement cm3 15.28 Oil quantity cm3 600 Maximum refrigerant charge g 1300 Free gas vol. in compressor cm3 1460 Weight without electrical equipment kg 13.5 ø16 204 178 ø19 Motor 170 ø9.7 Motor size watt 550 LRA (rated after 4 sec. UL984) HST A 21.8 35 70 127 150

Cut-in current HST A 21.8 101.6 Resistance, main and start winding (25°C) Ω 3.5/12.2

Approvals EN60 335-1/335-2-34 §19.3 127 165 D 186 C Dimensions 218 Height mm A 219 E B213

B1 193 B A B1 B2 110 B2 Suction connector location/I.D. mm C 10.2 ±0.09

Process connector location/I.D. mm D 6.2 ±0.09 3

Discharge connector location/I.D. mm E 6.2 ±0.09 255 Compressors on a pallet pcs. 80 151 63 37° 37° 55 55 63

107 107 8257 115

February 2000 CF.54.M1.02 1

42 CK.54.B5.02 February 2000 Capacity (CECOMAF) watt C0omp.\°C -52 -01 -51 -05270. 1 S3C15DL 638 910 1715 1142 1273 2706 2121 242 a3

Capacity (ASHRAE) watt a2 e C0omp.\°C -52 -01 -51 -05270. 1 S6C15DL 749 1505 1934 166 21028 2542 2960 284 c

8227 Power consumption watt C0omp.\°C -52 -01 -51 -05270. 1 S4C15DL 592 650 618 775 80 8053 887 88

Current consumption A d C0omp.\°C -52 -01 -51 -05270. 1 b S7C15DL 35.0 32.3 38.6 3.8 47.13 47.3 49.4 4.5 Start winding e

5 2 a2 COP (CECOMAF) W/W Main winding 4 1 Bleeder resistance C0omp.\°C -52 -01 -51 -05270. 1 Winding protector S0C15DL 18.3 18.4 10.6 14.9 22.1 25.4 23.5 2.7 11 22 c N N L L COP (ASHRAE) W/W a3 C0omp.\°C -52 -01 -51 -05270. 1 M S2C15DL 13.5 16.7 12.9 2.2 24.51 20.8 31.0 3.2 Thermostat Fan

Test conditions CECOMAF ASHRAE Condensing temperature 45°C 45°C Ambient and suction gas temperature 32°C 32°C Liquid temperature 45°C 32°C

Fan cooling F2, 220V 50Hz

Accessories Devices FLig. SC15D

Starting device 117-7028 (470 mm cable length) a3 117-7029 (550 mm cable length) 117-7032 (650 mm cable length)

2 CF.54.M1.02 February 2000

February 2000 CK.54.B5.02 43 SC-DL MBP/HBP Twin Compressor R404A/R507 220-240V 50Hz

Data Sheet (Replaces CD.54.E2.02)

General Compressor SC10/10DL SC10/10DL 104L Application Code number 104L4091 R404A R507 Application Lilac stripe Approvals Application MBP/HBP Barcode on white background 4091 Evaporating temperature range °C -20 to 10 DANFOSS COMPRESSORS Yellow background 8307 Voltage range V/Hz 198 - 254 /50 Motor type CSIR Max. ambient temperature °C 38 S = Static cooling normally sufficient O = Oil cooling Comp. cooling at ambient temp. 32°C F2 F1 = Fan cooling 1.5 m/s 38°C F (compressor compartment temperature 2 equal to ambient temperature)

F2 = Fan cooling 3.0 m/s necessary Design Displacement cm3 2 x 10.29 Oil quantity cm3 1220 Maximum refrigerant charge g 2200

Free gas vol. in compressor cm 2820 127 Weight without electrical equipment kg 26.8

Compressors on a pallet pcs. 18 320

326

February 2000 CF.54.N1.02 1

44 CK.54.B5.02 February 2000 Capacity (CECOMAF) watt C0omp.\°C -52 -01 -51 -05270. 1 S7C10/10DL 947 1524 1856 1593 2536 2384 3807 337

Starting relay Starting capacitor

10 11 10 11 Capacity (ASHRAE) watt 12 13 12 13 Start winding Main winding C0omp.\°C -52 -01 -51 -05270. 1 14 Winding 14 protector S8C10/10DL 1213 1845 1882 2126 2077 3234 3661 397 1 1 11

2 2 2 2 1933 N N N N L L L L Power consumption watt

21 3 Blue C0omp.\°C -52 -01 -51 -05270. 1 Black Brown S8C10/10DL 728 940 1400 1209 1717 1223 1026 129 M Thermostat Time delay relay Fan Thermostat 2 Safety pressure control Current consumption A C0omp.\°C -52 -01 -51 -05270. 1 Remove wire L-1 if time delay is used Remove wire 1-2 if thermostat 2 is used S1C10/10DL 54.1 53.5 58.9 60.2 67.6 68.8 60.9 7.1

COP (CECOMAF) W/W C0omp.\°C -52 -01 -51 -05270. 1 S4C10/10DL 18.2 16.3 17.5 12.7 20.0 24.3 22.4 2.6 service valve

seal ring COP (ASHRAE) W/W C0omp.\°C -52 -01 -51 -05270. 1 S4C10/10DL 11.4 12.6 17.8 26.0 20.3 26.7 28.8 3.0

Test conditions CECOMAF ASHRAE seal ring Condensing temperature 45°C 45°C Ambient and suction gas temperature 32°C 32°C Liquid temperature 45°C 32°C 8214 Fan cooling F2, 220V 50Hz

solder connector

Accessories Devices pLcs. SC10/10D S25tarting relay 117U600 Starting capacitor 80 µF2117U501 7 C22over 103N200 C24ord relief 103N100 Time-delay relay 1 117N0001 Check valve 2 020-1014 (to be used with time-delay relay) 118-7350 S1ervice valve (12 mm)

104B0584 S1older connector (12 mm)

Seal ring for service valve 18118-363 and solder connector

Mounting accessories Bolt joint for one compressor 27118-191 Bolt joint in quantities 118-1918

2 CF.54.N1.02 February 2000

February 2000 CK.54.B5.02 45 SC-DL MBP/HBP Twin Compressor R404A/R507 220-240V 50Hz

Data Sheet

General Compressor SC12/12DL SC12/12DL 104L Application Code number 104L4092 R404A R507 Application Lilac stripe Approvals Application MBP/HBP Barcode on white background 4092 Evaporating temperature range °C -20 to 10 DANFOSS COMPRESSORS Yellow background 8307-3 Voltage range V/Hz 198 - 254 /50 Motor type CSIR Max. ambient temperature °C 38 S = Static cooling normally sufficient O = Oil cooling Comp. cooling at ambient temp. 32°C F2 F1 = Fan cooling 1.5 m/s 38°C F (compressor compartment temperature 2 equal to ambient temperature)

F2 = Fan cooling 3.0 m/s necessary Design Displacement cm3 2 x 12.87 Oil quantity cm3 1220 Maximum refrigerant charge g 2200

Free gas vol. in compressor cm 2920 127 Weight without electrical equipment kg 27.8

Compressors on a pallet pcs. 18 320

326

February 2000 CF.54.O1.02 1

46 CK.54.B5.02 February 2000 Capacity (CECOMAF) watt C0omp.\°C -52 -01 -51 -05270. 1 S1C12/12DL 1613 1347 1188 2035 2888 3646 3674 411

Starting relay Starting capacitor

10 11 10 11 Capacity (ASHRAE) watt 12 13 12 13 Start winding Main winding C0omp.\°C -52 -01 -51 -05270. 1 14 Winding 14 protector S8C12/12DL 1331 1072 2120 2575 3237 4307 4440 484 1 1 11

2 2 2 2 1933 N N N N L L L L Power consumption watt

21 3 Blue C0omp.\°C -52 -01 -51 -05270. 1 Black Brown S1C12/12DL 927 1208 1019 1630 1940 1450 1055 161 M Thermostat Time delay relay Fan Thermostat 2 Safety pressure control Current consumption A C0omp.\°C -52 -01 -51 -05270. 1 Remove wire L-1 if time delay is used Remove wire 1-2 if thermostat 2 is used S4C12/12DL 68.4 63.8 76.3 78.7 85.1 81.5 88.7 8.8

COP (CECOMAF) W/W C0omp.\°C -52 -01 -51 -05270. 1 S6C12/12DL 16.1 18.3 11.5 15.8 20.0 21.3 26.4 2.5 service valve

seal ring COP (ASHRAE) W/W C0omp.\°C -52 -01 -51 -05270. 1 S6C12/12DL 19.3 15.5 12.8 20.1 20.4 23.7 21.8 3.0

Test conditions CECOMAF ASHRAE seal ring Condensing temperature 45°C 45°C Ambient and suction gas temperature 32°C 32°C Liquid temperature 45°C 32°C 8214 Fan cooling F2, 220V 50Hz

solder connector

Accessories Devices pLcs. SC12/12D S29tarting relay 117U601 Starting capacitor 80 µF2117U501 7 C22over 103N200 C24ord relief 103N100 Time-delay relay 1 117N0001 Check valve 2 020-1014 (to be used with time-delay relay) 118-7350 S1ervice valve (12 mm)

104B0584 S1older connector (12 mm)

Seal ring for service valve 18118-363 and solder connector

Mounting accessories Bolt joint for one compressor 27118-191 Bolt joint in quantities 118-1918

2 CF.54.O1.02 February 2000

February 2000 CK.54.B5.02 47 SC-DL MBP/HBP Twin Compressor R404A/R507 220-240V 50Hz

Data Sheet (Replaces CD.54.G1.02)

General Compressor SC15/15DL SC15/15DL 104L Application Code number 104L4093 R404A R507 Application Lilac stripe Approvals Application MBP/HBP Barcode on white background 4093 Evaporating temperature range °C -20 to 10 DANFOSS COMPRESSORS Yellow background 8307-2 Voltage range V/Hz 198 - 254 /50 Motor type CSR Max. ambient temperature °C 38 S = Static cooling normally sufficient O = Oil cooling Comp. cooling at ambient temp. 32°C F2 F1 = Fan cooling 1.5 m/s 38°C F (compressor compartment temperature 2 equal to ambient temperature)

F2 = Fan cooling 3.0 m/s necessary Design Displacement cm3 2 x 15.28 Oil quantity cm3 1220 Maximum refrigerant charge g 2200

Free gas vol. in compressor cm 2920 127 Weight without electrical equipment kg 28.0

Motor 100 Motor size watt 2 x 550 127 ø16 175 LRA (rated after 4 sec. UL984) HST* A 21.8 D 302 Cut-in current HST* A 21.8 C Resistance, main and start winding (25°C) Ω 3.5/12.1 Approvals EN60 335-1/335-2-34 §19.3 * Operational current for the second compressor time-delayed.

Compressors on a pallet pcs. 18 320

326

February 2000 CF.54.P1.02 1

48 CK.54.B5.02 February 2000 Capacity (CECOMAF) watt C0omp.\°C -52 -01 -51 -05270. 1 S6C15/15DL 1636 1280 2430 2285 3446 4312 4243 484 Winding protector Starting capacitor Main winding Starting relay Run capacitor Start winding Bleeder resistance Capacity (ASHRAE) watt 5 2 5 2 C0omp.\°C -52 -01 -51 -05270. 1 S2C15/15DL 1759 2010 2969 3633 4205 4084 5921 569 4 1 4 1

1 1 1 1

22 2 2 1932 N N NN Power consumption watt L L L L

C0omp.\°C -52 -01 -51 -05270. 1 Blue Black Brown S8C15/15DL 1804 1021 1237 1450 1661 1970 1673 177 M Fan Time delay relay Thermostat Thermostat 2 Safety pressure control Current consumption A C0omp.\°C -52 -01 -51 -05270. 1 Remove wire L-1 if time delay is used Remove wire 1-2 if thermostat 2 is used S2C15/15DL 68.0 66.6 79.2 78.7 83.2 82.7 86.9 9.1

COP (CECOMAF) W/W C0omp.\°C -52 -01 -51 -05270. 1 S0C15/15DL 18.3 18.4 10.6 14.9 22.1 25.4 23.5 2.7 service valve

seal ring COP (ASHRAE) W/W C0omp.\°C -52 -01 -51 -05270. 1 S2C15/15DL 13.5 16.7 12.9 21.2 24.5 20.8 31.0 3.2

Test conditions CECOMAF ASHRAE seal ring Condensing temperature 45°C 45°C Ambient and suction gas temperature 32°C 32°C Liquid temperature 45°C 32°C 8214 Fan cooling F2, 220V 50Hz

solder connector

Accessories Devices pLcs. SC15/15D

Starting device 117-7028 (470 mm cable length) 2 117-7029 (550 mm cable length) 117-7032 (650 mm cable length)

C22over 103N200 C24ord relief 103N100 Time-delay relay 1 117N0001 Check valve 2 020-1014 (to be used with time-delay relay) 118-7351 S1ervice valve (16 mm)

118-7405 S1older connector (16 mm)

Seal ring for service valve 18118-363 and solder connector

Mounting accessories Bolt joint for one compressor 27118-191 Bolt joint in quantities 118-1918

2 CF.54.P1.02 February 2000

February 2000 CK.54.B5.02 49 50 CK.54.B5.02 February 2000 February 2000 CK.54.B5.02 51 LBP/MBP Compressors MBP/HBP Compressors

T-Series T-Series TL4CL Page 8 TL4DL Page 34

F-Series F-Series FR6CL Page 10 FR6DL Page 36 FR8.5CL (LBP) Page 12

S-Series S-Series SC10CL Page 14 SC10DL Page 38 SC12CL Page 16 SC12DL Page 40 SC15CL Page 18 SC15DL Page 42 SC18CL Page 20 SC21CL (LBP) Page 22

S-Series (Twins) S-Series (Twins) SC10/10CL Page 24 SC10/10DL Page 44 SC12/12CL Page 26 SC12/12DL Page 46 SC15/15CL Page 28 SC15/15DL Page 48 SC18/18CL Page 30 SC21/21CL (LBP) Page 32

Danfoss can accept no responsibility for possible errors in catalogues, brochures and other printed material. Danfoss reserves the right to alter its products without notice. This also applies to products already on order provided that such alterations can be made without subsequential changes being necessary in specifications already agreed. All trademarks in this material are property of the respective companies. Danfoss and the Danfoss logotype are trademarks of Danfoss A/S. All rights reserved. Danfoss Compressors GmbH Mads-Clausen-Strasse 7 Postfach 1443, D-24939 Flensburg Telefon: (0461) 4941-0 International +49 461 4941-0 Telefax: +49 461 44715 Telex: 227 43 dancom d

February 2000 CK.54.B5.02 52