DOCSLIB.ORG

Nissan Security+Plus Extended Protection Plans

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Nissan Security+Plus Extended Protection Plans EXTENDED PROTECTION PLANS Enjoy peace of mind with superior benefits and protection Protect your Investment 0% Consumer Financing Plan Available Each year, more and more sophisticated No Qualification — Convenient Terms 1 3 5 technology is built into vehicles to improve their 2 4 R safety, performance, comfort and value. These same innovations help to increase the vehicle’s reliability. However, if something does go wrong, Factory-trained Technicians & Advanced the necessary repairs can be more complex and Diagnostic Equipment Maximize Your costly than they were 5 or 10 years ago. Nissan’s Safety and Reliability 1 3 5 2 4 R 1 3 5 2 4 R 1 3 5 Average Repair2 4 R Estimates* 1 3 5 2 4 R Air Conditioning Power Window $915 Motor Engine $378 Alternator $6,328 $689 Timing Chain $1,041 1 3 5 2 4 R 1 3 5 2 4 R 1 3 5 1 3 5 1 3 5 2 4 R Fuel Pump 2 4 R 2 4 R Transmission $607 Brake Caliper Rack & Pinion Control Arm Starter $3,325 $455 $1,272 $478 $401 *Image is for illustration purposes only. Repair costs are based on the 2017 Rogue. • Protect essential vehicle systems • Superior parts and service designed beyond your factory warranty — up exclusively for your Nissan to 8 years and 120,000 miles • Choose Gold Preferred for the • Convenient and economical ultimate in peace-of-mind coverage that guards against the protection for your new or rising cost of repairs pre-owned Nissan Why Security+Plus? For 30 years, we’ve provided Service You Can Trust - comprehensive, factory-backed coverage for Nissan Owners and repairs at any authorized Nissan dealership nationwide. With approximately $700 million in annual sales and over two and a half million cars on the road today covered by our products, we are one of the largest service contract providers in the automotive marketplace. 120,000 100,000 Nissan 75,000 Security+Plus How am I protected? 60,000 Extended Protection Plan Your Nissan vehicle warranty is very comprehensive. It covers virtually every part 48,000 in your vehicle and can help prevent you from paying expensive repair bills. Only 36,000 one problem - it ends. And when it does, you could be exposed to unexpected Factory repair costs. A Security+Plus Extended Protection Plan can protect your Warranty investment and your pocketbook when your factory warranty expires. Miles Months 36 48 60 72 84 96 Guard against the rising cost of repairs The average age of cars and light trucks currently in operation in the U.S. has Factory Warranty increased to 10.8 years.* As your vehicle gets older, both the risk and cost of repairs Security+Plus Extended may increase. Protection Plan § Our contract terms and options provide you with an unparalleled value, right now. Average Expense per Repair Visit $800 • Choice of plan level that best suits you with $0 or $100 deductible, $700 per visit $600 • Payment-free service, other than your deductible Dealers are $500 paid directly $400 $300 • Transferable if you sell before your coverage expires; helps enhance $200 † resale value $100 $0 • Wide Range of Term Options available for both New and Pre-Owned 1 2 3 4 5 6 7 • Customer Assistance throughout the United States at any Nissan dealer or Vehicle Age in Years by calling 800-NISSAN-1 Additional Benefits Start immediately and help to create a worry-free driving experience: Over 50% of Battery • Emergency Roadside Assistance 24 hours a day, 365 days a year with no all Roadside Boost deductibles for the services shown to the right, or for dispatch towing service Assistance Lock Out Other • Trip Interruption‡ Reimbursement for alternate transportation, meals and calls are Fuel due to non- Delivery lodging when you are 100 miles or more from home§ Tire mechanical Service • Car Rental Assistance‡ Reimbursement for up to $35/day for five (5) days§ issues. • Towing‡ Reimbursement up to $100 per claim§ * Source: R.L. Polk ** These statements are based on the repair records of NESNA customers as of August 2017. Your experience † A nominal transfer fee may apply. may be different. Information based on original compilation date and not the date of this brochure. ‡ Gold Preferred and Silver Preferred Plans only Note: § Should you have a mechanical breakdown of Turbocharger, Supercharger, Diesel Engine and AWD/4WD are covered only if the applicable option was a covered component selected on the Security+Plus Application/Declaration at the time of purchase and the required surcharge paid. Plan Coverage Comparison†† COVERAGE SO EXTENSIVE, ONLY A FEW ITEMS ARE NOT COVERED: Virtually all major components GOLD of your Nissan are covered, except for normal maintenance services and a few components listed PREFERRED on the service contract, providing you with an unprecedented level of exclusionary coverage and a truly worry-free driving experience. 1 3 5 Includes all components covered by Powertrain Preferred, plus another 690+ essential 1 3 5 SILVER components and three Additional Benefits:2 4 R Trip Interruption, Car Rental, and Towing 2 4 R PREFERRED1 3 5 reimbursement 1 3 5 TRANSMISSION2 4 R NISSAN AIR CONDITIONING (OEM ONLY) 2 4 R Oil cooler and transfer control unit Temperature control programmer, blower motor, heater core, and belts and hoses. 1 3 5 BRAKES REAR WHEEL DRIVE AND FOUR WHEEL DRIVE 1 3 5 Companion flanges Anti-lock braking2 4 Rsystem, and belts and hoses. 1 3 5 2 4 R SUSPENSION CAR RENTAL REIMBURSEMENT 2 4 R If you require alternate transportation due to the MECHANICAL BREAKDOWN of 1 3 5 Rear axle beam and electric adjustable shock absorbers a covered part, reimbursement for the actual expenses of substitute transportation 12 34 R5 STEERING up to $35 per day are included, to a maximum of five (5) days, and $175 per breakdown. 2 4 R Power steering pump and reservoir tank, and belts and hoses. Rental must be made from an authorized rental agency or your repairing Nissan dealer. ELECTRICAL TOWING Manually and mechanically operated switches, relays, sensors, electronic If your vehicle requires towing due to the MECHANICAL BREAKDOWN of a instrument cluster, electronic driver information display and module (head up display covered part, reimbursement for the actual towing expense incurred in towing it to the unit), drive computer display, washer motor, power window motors and regulators, nearest participating Nissan dealer will be covered, not to exceed $100 per claim. power door locks, power seat motors, sunroof motor, power mirror motors and TRIP INTERRUPTION BENEFITS actuators, keyless entry (excludes immobilizer key and remote keyless entry switch Emergency travel/trip interruption coverage is provided should any MECHANICAL assembly), automatic speed control, O.E.M. anti-theft system, computer units and BREAKDOWN occur when you are 100 miles or more away from home, up to $500 sonar suspension, Nissan-supplied audio system components, Nissan-supplied mobile per claim. Benefits may apply to the occurrence of the following expenses: alternate entertainment systems, and Nissan-supplied navigational systems. transportation, meals and lodging. POWERTRAIN Covers repairs needed due to the mechanical breakdown of 839+ components. Your peace of mind includes Emergency Roadside Assistance 24 hours a day, 7 days a week, 365 days a year PREFERRED1 3 5 Your vehicle’s factory2 4 LimitedR Powertrain Warranty covers only those components SUSPENSION listed in RED text. 1 3 5 Strut assemblies, upper and lower control arms (links/transverse links) and ENGINE bushings,2 4 R tension/compression rods and bushings, stabilizer bars and bushings, Cylinder block, head(s) and all internal parts, timing gears, tensioner(s), timing connecting rods and bushings, rear arm assembly, torsion bars, upper and lower ball chain or belt and cover(s), harmonic balancer (crankshaft pulley), manifolds and joints, wheel bearings and seals, knuckle spindle, hubs, king pins and bearings, front coil collector(s), oil pump, valve cover(s), oil pan, drive plate, flywheel ring gear and engine and leaf springs. mounts, turbocharger housing and internal parts, turbocharger valves and actuator,1 3 5 1 3 5 STEERING radiator, fan and fan coupling, fan motor, water pump, and seals and gaskets. 2 4 R Steering gear housing(s) and all internal parts, rack and pinion assembly, 2 4 R 1 3 5 power steering pump, steering column main and upper shafts, steering linkages and TRANSMISSION 1 3 5 2 4 R Transmission case(s) and all internal parts including the torque converter, couplings, HICAS power cylinder assembly and all internal parts, and seals and gaskets. vacuum modulator,2 4 R electric control units, oil pan, transmission mounts, transfer case ELECTRICAL and all internal parts, and seals and gaskets. Starter motor and solenoid, alternator, voltage regulator, ignition coil, distributor, ignition switch and module, transistor ignition unit, electronic spark control detonation FRONT WHEEL DRIVE 1 3 5 Final drive housing and all internal parts, constant velocity joints (slide joint sensor and controller, wiring harness, horn and windshield wiper motor. spider assemblies),2 4 R and seals and gaskets. Note: constant velocity boots are excluded FUEL SYSTEM from coverage. Fuel pump(s), electro injection unit, electronic fuel injection sensors, control 1units,3 5 injectors, fuel tank and lines, and seals and gaskets. REAR WHEEL DRIVE AND FOUR WHEEL DRIVE 1 3 5 1 3 5 Rear drive axle housing and all internal parts, propeller shaft(s), universal 2 4 R BRAKES 2 4 R joints ( journal assemblies), axle shafts, axle bearings and retainers, free running hubs, Master cylinder,2 vacuum4 R assist booster, wheel cylinders, disc calipers, hydraulic constant velocity joints (spider assemblies), and seals and gaskets. Note: constant valves, lines and fittings, and seals and gaskets.
Load more

Recommended publications
  • Ci Council Agenda Item Meeting of May 5, 2020
    Ci Council Agenda Item Meeting of May 5, 2020 TO: The Honorable Mayor and Members of the City Council FROM: Monte K. Falls, P.E. - City Manager {V\~l,.bO ,i.,.;:;., 1' f;t-t(~~ DATE: April 23, 2020 SUBJECT: Water and Sewer Department Service Truck Replacements - $75,000.00 REQUESTED BY: City Manager/Water and Sewer Director The following is requested as it relates to the above-referenced agenda item: X Request Council review and approval based on the attached supporting documentation. No action required. (Information only) DEPARTMENTAL CORRESPONDENCE WATER AND SEWER DEPARTMENT To: Monte K. Falls, P.E., City Manager From: Robert J. Bolton, P.E., Director "- Date: April 15, 2020 RE: Service Truck Replacements, $75,000.00 Recommendation: !II Place this item on the City Council's Agenda for May 5, 2020; • Approve purchase of two (2) service trucks to replace existing service trucks in the Lift Station Division that was not budgeted in FY 19/20. This request is for approval in amount not-to-exceed $75,000.00. Funding: Costs will be charged to fund 423.9010.536.616050. A line item budget transfer has been prepared to transfer funds from account 423.9010.536.673161 (Gravity Sewer Rehabilitation). Background: The Water and Sewer Department has two trucks Nos. 9804 and 9805 that are in disrepair and need to be replaced. No. 9804 is a 2006 truck with a bad engine. No. 9805 is a 2008 truck with a rusted out body. Both of these trucks are in the lift Station Division and are used to lift pumps out of the lift stations for repair via a crane that is mounted to the truck body.
    [Show full text]
  • BRZ ELECTRICAL WIRING DIAGRAM Section Code Page INTRODUCTION
    BRZ ELECTRICAL WIRING DIAGRAM Section Code Page INTRODUCTION............................... A .... 2 HOW TO USE THIS MANUAL.................. B .... 3 TROUBLESHOOTING ......................... C .... 12 ABBREVIATIONS . D .... 17 GLOSSARY OF TERMS AND SYMBOLS...... E .... 18 RELAY LOCATIONS........................... F .... 20 ELECTRICAL WIRING ROUTING.............. G .... 38 SYSTEM CIRCUITS ............................ H .... 50 GROUND POINT ............................... I .... 370 POWER SOURCE (Current Flow Chart) . J .... 378 CONNECTOR LIST............................ K .... 388 1 BRZ (G4400BE) M PP 2 BRZ (G4400BE) 3 BRZ (G4400BE) M M M M M M M M M M M M M M M M M M 4 BRZ (G4400BE) M 5 BRZ (G4400BE) 6 BRZ (G4400BE) PP PP PP PP PP 7 BRZ (G4400BE) M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M 8 BRZ (G4400BE) PP M
    [Show full text]
  • Glasses, Window System & Mirrors
    BODY A B SECTION GW GLASSES, WINDOW SYSTEM & MIRRORS C D CONTENTS E SERVICE INFORMATION ............................ 3 CONSULT-III Function (BCM) .................................30 F Power Window Auto Operation Initialization ............31 PRECAUTIONS ................................................... 3 Trouble Diagnosis Symptom Chart ..........................31 Precaution for Supplemental Restraint System BCM Power Supply and Ground Circuit Inspection G (SRS) "AIR BAG" and "SEAT BELT PRE-TEN- ....32 SIONER" ...................................................................3 Main Power Window and Door Lock/Unlock Precaution Necessary for Steering Wheel Rota- Switch Power Supply and Ground Circuit Inspec- H tion After Battery Disconnect .....................................3 tion ...........................................................................32 Precaution for Procedure without Cowl Top Cover...... 4 Front Power Window Motor LH Circuit Inspection.... 33 Handling for Adhesive and Primer ............................4 Front Power Window RH Circuit Inspection (Pow- er Window and Door Lock/Unlock Switch RH Op- GW PREPARATION ................................................... 5 eration) ....................................................................34 Commercial Service Tool ..........................................5 Front Power Window Motor RH Circuit Inspection.... 34 SQUEAK AND RATTLE TROUBLE DIAG- Encoder Circuit Inspection .......................................36 J Door Switch Check ..................................................38
    [Show full text]
  • Body Builder's Drawings and Supporting Data
    BODY BUILDER’S DRAWINGS AND SUPPORTING DATA LIT. No. HMT07M006-A SEP. 2007 INTRODUCTION This book has been designed to provide information for body and equipment manufacturers who mount their products on FK, FM chassis. We believe that all the detailed information which is essential for that purpose is contained in this book, but if you require any additional data or information, please contact : MITSUBISHI FUSO TRUCK OF AMERICA, INC. 2015 Center Square Road, Logan Township, NJ 08085 (Phone : (856) 467-4500) The specifications and descriptions contained in this book are based on the latest product information at the time of publication, but since the design of Mitsubishi-Fuso truck is continuously being improved, we must reserve the right to discontinue or change at any time without prior notice. COMPLIANCE WITH FEDERAL MOTOR VEHICLE SAFETY STANDARDS The federal government has established Federal Motor Vehicle Safety Standards (FMVSS) for various categories of motor vehicles and motor Vehicle equipment under the provisions of the National Traffic and Motor Vehicle Safety Act of 1966. The Act imposes important legal responsibilities on manufacturers, dealers, body builders and others engaged in the marketing of motor vehicles and motor vehicles equipment. Vehicles manufactured by Mitsubishi FUSO Truck & Bus Corporation (MFTBC) for the subsequent installation of commercical bodies are classified as incomplete vehicles. These vehicles fully comply with certain applicable Motor Vehicles Safety Standards, and partially (or do not) comply with others. They cannot be certified fully because certain components which are required for certification are not furnished. Under present federal regulations, vehicles completed from these units are required to meet all applicable standards in effect on the date of manufacture of the incomplete vehicles, the date of final completion, or date between those two dates, as determined by their final configuration.
    [Show full text]
  • August 19, 2003 Honorable Jeffrey Runge, M.D., Administrator National
    August 19, 2003 Honorable Jeffrey Runge, M.D., Administrator National Highway Traffic Safety Administration U.S. Department of Transportation 400 Seventh Street, S.W. Washington, D.C. 20590 PETITION For more than thirty years, NHTSA has had the opportunity to prevent power window incidents inflicting death and injury by requiring manufacturers to install proper preventive mechanisms, but has neglected to do so. Since FMVSS 118 took effect on February 1, 1971, at least 33 children have been killed1 and thousands more children and adults have been injured2 by power windows. These tragedies could have been prevented had manufacturers been required to install fail-safe technology to ensure that occupants could not be trapped in rising windows. Such technology is now widely and voluntarily employed in the European market, even by the automakers that have vigorously opposed such requirements in the United States. The Center for Auto Safety (CAS), Public Citizen, KIDS AND CARS (KAC), Consumer Federation of America (CFA), Advocates for Highway and Auto Safety, the Zoie Foundation, the Trauma Foundation, and Consumers for Auto Reliability and Safety (CARS) petition the National Highway Traffic Safety Administration (NHTSA) pursuant to 49 C.F.R. 552 to initiate rulemaking for the purpose of amending Federal Motor Vehicle Safety Standard 118 (FMVSS 118) to protect children from death and injury involving power-operated windows and roof panels. Petitioners request that NHTSA propose modifying FMVSS 118 to require anti-trap mechanisms in all motor vehicles that would reverse the direction of power window operation when an obstruction is encountered. Petitioners also request that NHTSA propose requiring all manufacturers to install power window controls to prevent inadvertent engagement by occupants.
    [Show full text]
  • Allstate® Vehicle Service Contract Can Protect You Protection That Family of Companies Has Been There from Paying High Repair Costs
    Examples of covered parts by plan. VEHICLE­SERVICE­CONTRACT PREMIER­CARE/PREMIER­CARE­WRAP ­­­­PREFERRED CARE Engine Brakes Air Conditioning Fuel Additional Items STANDARD CARE RR R R R Air Conditioning Fuel Convenience • All internal • Backing plate • Bearing and pulley • Accelerator pedal • A/C-heater air box R R R BASIC CARE Accessories fasteners • Equalizer • Hi/low control processor/ • Adjustable Brakes Suspension • Air ducts and • Accelerator pedal R R • Harmonic bolt • Metal hydraulic lines pressure hose module pedal motors outlet hoses • Fuel distributor • Convertible top Engine Drive Axles • Hydraulic brake • Ball joints motor and pulley and fittings and metal A/C lines • Fuel distributor • Cigarette lighter R R • Automatic booster • Fuel injection/ • Timing tensioner • Idler pulley • Fuel injection/ • Control arm shafts temperature control • Cruise control • Pressure modulator • Head lamp motors • Cylinder block • Axle bearings metering pump and bearing metering pump • Master cylinder and bushings • Timing cover control/isolation • Headlight dimmer • Cylinder head • Constant velocity programmer • Fuel injection • Dash gauges • Seals and gaskets • Seals and gaskets • Timing gears dump valves • Oil and refrigerant • Fuel injection module • Engine mounts joints/boots • Blower motor mixture control pro- • Driver information • Wheel cylinders • Upper and lower • Waste gate • Proportioning and (when required with mixture • Differential axle and fan cessor & sensors center • Headrest or ceiling • Exhaust manifold control arms combination
    [Show full text]
  • 5 Vehicle Id / History / Index
    VEHICLE ID / HISTORY / INDEX 5 Vehicle Identification Number Explorer Key Information Explorer 1991-94 1991: The 1991 Explorer replaced the Bronco II as the Ford midsized SUV. The front end was similar to the Ranger STX. The vehicle Where to Find Your Vehicle Identification Number (VIN) came in two or four doors and was larger than the Bronco II. For the 1991-94 Explorer the VIN plate is visible through the driver's Trim lines included the XL, XLT and the Eddie Bauer Edition. side of the windshield. The only engine available was the 4.0 Liter V6. The Explorer Vehicle Identification Number - 1FMDU34X1MUB04683 offered optional 4WD or automatic overdrive transmission. A Twin I-Beam front suspension was standard on 2WD models and the Twin Traction front axle came with 4WD models. 1 F M D U 34 X 1 M U B04683 1992: The Explorer had proven to become the best selling SUV in the Nation of Origin U.S. giving Ford no reason to make any changes this year. 1 = USA 2 = Canada 1993: In 1993 a fully loaded Limited Edition was offered along with Manufacturer the original XL, XLT and Eddie Bauer trim levels. Four wheel F = Ford Motor Company ABS became standard on all Explorers. Type of Vehicle 1994: With the continued success as being the most popular SUV M = Multipurpose Vehicle in the U.S. there were no reasons to make any significant Brakes/Gross Vehicle Weight* changes this year. B or U = 3,001-4,000 lbs C or Y = 4,001-5,000 lbs D or Z = 5,001-6,000 lbs *Due to varying options available Overflow Kit, Coolant 55 Rubberized Undercoating 50 GVWR code was changed for certain model years.
    [Show full text]
  • ENGINE Internally Lubricated Parts Including
    Inside5pgFldout 12/14/05 09:43 AM Page 1 ENGINE Internally • Cylinder Heads • Water Pump • Extension Housing • Sprags • Cooling fan clutch DIFFERENTIAL – FUEL – • Center Link lubricated parts • Intake Manifold • Water Pump Pulley Gasket • Springs • Cooling fan electric (Primary Drive) – • Fuel tank and lines • Control Rings including: • Intake Valves • Gears • Sprockets motors • Pinion Bearings • Fuel Sending Unit • Control Valve • Pistons • Intercooler The engine block and • Governor • Stator • Pinion Gear • Fuel Inject Metering • Cups • Piston Rings • Lifters cylinder heads are also • Governor Cover • Stator Shaft SEALS AND GASKETS – • Pinion Flange Pump • Drag Link • Piston Pins • Main Bearing Caps covered if caused by a • Governor Gear • Sun Gear Shell • Head gasket(s) • Propeller Shafts; • Fuel Injectors • Pitman Arm failure of any of the • Crankshaft and Main • Main Bearings • Idler Shaft • Sun Gears • Intake Manifold “U” joints • Fuel Distributor • Pitman Shaft Bearings above covered items. • Oil Cooler • Input Shaft • Synchronizer Hub Gasket • Axle Shafts • Fuel pump housing • Pitman Shaft Adjuster • Camshaft and • Oil Cooler Lines • Inspection Plugs • Synchronizer Key(s) • Upper Plenum Gasket • Axle Bearings & • Diaphragms • Pitman Shaft Seal Bearings TRANSMISSION – Races • Oil Filter Adapter • Intermediate Shaft • Synchronizer Ring • Valve Cover Gasket • Springs O-ring • Timing Chain Automatic or Manual: • Axle Flange • Oil Pan • Main Shaft • Synchronizer Sleeves • Water Pump Gasket • Valves and Actuating • Pump Shaft • Timing
    [Show full text]
  • Power Window Control System
    WINDSHIELD / WINDOWGLASS – POWER WINDOW CONTROL SYSTEM WS–1 POWER WINDOW CONTROL SYSTEM PRECAUTION NOTICE: FOR INITIALIZATION: When disconnecting the cable from the negative (-) battery terminal, initialize the following system after the cable is reconnected. System Name See Page Power Window Control System IN-32 FOR HYBRID SYSTEM ACTIVATION: When the warning light is illuminated or the battery has been disconnected and reconnected, pressing the power switch may not start the system on the first try. If so, press the power switch again. WS WS–2 WINDSHIELD / WINDOWGLASS – POWER WINDOW CONTROL SYSTEM HOW TO PROCEED WITH TROUBLESHOOTING HINT: • Use this procedure to troubleshoot the power window control system. • *: Use the intelligent tester. 1 VEHICLE BROUGHT TO WORKSHOP NEXT 2 INSPECT BATTERY VOLTAGE Standard voltage: 11 to 14 V If the voltage is below 11 V, recharge or replace the battery before proceeding. NEXT 3 CHECK COMMUNICATION FUNCTION OF LARGE-SCALE BODY MULTIPLEX COMMUNICATION SYSTEM (BEAN)* (a) Using the intelligent tester, check if the Multiplex Communication System (MPX) is functioning normally. Result Result Proceed to MPX DTC is not output A WS MPX DTC is output B B Go to MULTIPLEX COMMUNICATION SYSTEM A 4 PROBLEM SYMPTOMS TABLE Result Result Proceed to If the fault is not listed in the problem symptoms table A If the fault is listed in the problem symptoms table B B Go to step 7 A 5 OVERALL ANALYSIS AND TROUBLESHOOTING* (a) Terminals of ECU (see page WS-9) WINDSHIELD / WINDOWGLASS – POWER WINDOW CONTROL SYSTEM WS–3 (b) DATA LIST / ACTIVE TEST (see page WS-13) (c) On-vehicle Inspection (see page WS-14) (d) Inspection (see page WS-16) NEXT 6 ADJUST, REPAIR OR REPLACE NEXT 7 CONFIRMATION TEST NEXT 8 RESET POWER WINDOW MOTOR If the power window switch AUTO light is blinking, reset the power window (see page WS-7).
    [Show full text]
  • Vehicle Protection
    VEHICLE PROTECTION TRANSMISSION / • Rear Bands • Crankshaft Sprockets FUEL SYSTEM • Temperature Controller • Lower Ball Joints • Overflow Tank • Wiring Harness MISCELLANEOUS TRANSFER CASE • Reverse Bands • Cylinder Block • Vacuum Tank • Lower Control Arms • Radiator • Body Control Module • Reverse Servo • Cylinder Head Bolts • Air Temperature Sensor • Vent Door Motor • Radius Arms • Seals/Gaskets/O-Rings • Door Hinge • Accumulator Pistons • Ring Gears • Cylinder Heads • Barometric Pressure Sensor • Seals/Gaskets/O-Rings • Temperature Sending Unit • Door Latch/Lock • Cold Start Switch FRONT / REAR • Gas Tank Door Release • Accumulator Rings • Roll Pins • Dipstick/Tube STEERING • Spindle Supports • Water Pump • Accumulator Seals Bands • Roller Clutches • Engine Mounts • Coolant Temperature Sensor • Spindles WHEEL DRIVE • Glove Box Hatch • ESC Detonation Sensor • Glove Box Latch • Bearings • Seals • Exhaust Manifolds • Center Link • Spring Shackles ELECTRICAL • Axles • Bell Housing • Servo Rings • Exhaust Valves • Fast Idle Valve • EVO Actuator • Stabilizer Bars • Axle Shaft • Glove Box Lock • Bushings • Shafts • Flex Plate • Fuel Accumulator • Flow Control Valve • Stabilizer Bar Bushings • Alternator • Carrier Bearing • Hood Hinge • Case • Shift Cover • Fly Wheel • Fuel Charging Assembly • Fluid Cooler • Stabilizer Bar Links • Amplifier • Center Support Bearings • Hood Latch/Lock • Chains • Shift Forks • Freeze Plugs • Fuel Distributor Manifold • Fluid Cooler Lines • Strut Bars • Antenna Mast/Motor • CV Joints • Hodo Release • Check Balls
    [Show full text]
  • View Coverage Details
    American Auto Shield The following is a general representation of coverage. Please consult your contract for specific coverage details, your obligations, and exclusions. PLATINUM Component Part Description Included Contract Reference Group A/C HEATING OUTLET/DUCT A/C LINES ACCUMULATOR/RECEIVER DRYER √ AUTO HEATER/AC CONTROL HEAD ASSY √ AUTO-CLIMATE CTRL PROGRAMMER √ BLEND DOOR ACTUATOR √ BLEND DOOR CABLE BLEND DOOR CASE BLOWER MOTOR RELAY √ COMPRESSOR √ COMPRESSOR CLUTCH(S) √ COMPRESSOR PULLEY √ COOLANT RECOVERY TANK AIR EVAPORATOR √ CONDITIONING EVAPORATOR CASE EXPANSION VALVE √ GASKET(S) √ HEATER/AC BLOWER SPEED SWITCH √ HIGH/LOW CUT-OFF SWITCH OR PRESSURE SWITCH HOSE(S) IDLER PULLEY √ MANUAL HEATER/AC CONTROL HEAD ASSEMBLY √ ORIFICE TUBE √ PRESSURE CYCLING SWITCH REFRIGERANT √ ONLY IF REQUIRED FOR COVERED REPAIR REFRIGERANT -OIL √ ONLY IF REQUIRED FOR COVERED REPAIR SEAL(S) √ CONDENSOR √ ABS ACCUMULATOR √ BRAKES ABS ELECTRONIC CONTROL PROCESSOR √ ABS GASKET(S) √ ABS HYDRAULIC PUMP/MOTOR ASSEMBLY √ ABS WHEEL SPEED SENSOR √ PROPORTIONING VALVE √ BRAKE CALIPER √ BRAKE CALIPER KIT √ HOSE(S) GASKET(S) √ BRAKES ABS PRESSURE MODULATOR VALVE √ HYDRAULIC FITTING(S) HYDRAULIC LINE(S) POWER BRAKE CYLINDER √ SEAL(S) √ VACUUM ASSIST BOOSTER PUMP √ Wheel Cylinder √ BRAKE MASTER CYLINDER √ PARKING BRAKE CABLES/LINKAGE PARKING BRAKE ACTUATOR √ BRAKE ROTORS AXLE HOUSING BEARING(S) √ CARRIER BEARING(S) √ CARRIER(S) √ CENTER SUPPORT BEARING(S) √ CRUSH SLEEVE √ CV BOOT √ CV HALFSHAFT COMPLETE √ CV JOINT √ DIFFERENTIAL AXLE COMPLETE DIFFERENTIAL COVER
    [Show full text]
  • Federal Register/Vol. 68, No. 212/Monday, November 3, 2003
    62346 Federal Register / Vol. 68, No. 212 / Monday, November 3, 2003 / Notices Standard No. 101 Controls and will be installed on any vehicles that are level of safety is at least equal to that of Displays: (a) Substitution of the word not already so equipped. a non-exempted vehicle. ‘‘Brake’’ for the ECE warning symbol as In addition, the petitioner states that Notice of receipt of the application a marking for the brake failure indicator a vehicle identification number (VIN) was published on July 22, 2003, and an lamp; (b) replacement or conversion of plate must be affixed to the vehicles so opportunity afforded for comment (68 the speedometer to read in miles per that it is readable from outside the FR 43419). hour. driver’s windshield pillar, and a Standard No. 108 Lamps, Reflective reference and certification label must be The Motor Vehicle for Which a Devices and Associated Equipment: affixed to the edge of the driver’s side Temporary Exemption Is Sought Inspection of all vehicles and door or to the latch post nearest the Ford is the manufacturer of the replacement of noncompliant lighting driver to meet the requirements of 49 Lincoln Town Car. It plans to make this system components with U.S-model CFR Part 565. model available in a ‘‘Ballistic parts on vehicles that are not already so Lastly, the petitioner states that a Protection Series (BPS).’’ The Town Car equipped. certification label will be affixed to the BPS will be equipped with a windshield Standard No. 110 Tire Selection and driver’s side doorjamb to meet the that is 40.68 mm thick, as contrasted Rims: Installation of a tire information requirements of the vehicle certification with the standard Town Car’s placard.
    [Show full text]