Annexure V a – Question Bank – Certificate in Computer Basics
IECD Institute for Entrepreneurship and Career Development Bharathidasan University,Tiruchirappalli – 620 023
Certificate in Computer Basics Course Code –CCB
UNIT I - INTRODUCTION TO COMPUTER
1. The first fully electronic computer was ______. a) UNIVAC b) ENIAC c) IBM 360 d) PDP11 2. ENIAC handled numbers in ______form. a) Binary b) Octal c) Decimal d) Hexadecimal 3. Father of computer is______. a) Charles Babbage b) Mauchly c) Martyn d) Eckert 4. ______constructed ENIAC computer. a) Charles Babbage b) Mauchly& Eckert c) Martyn d) Charlie 5. ______is an example of first generation computers. a) UNIVAC b) IBM 140, CDC 1640 c) IBM 360, PDP11 d) Pentium Core i5 6. ______is the basic component used in first generation computers. a) Transistors b) Vaccum tubes c) ICs d) Microprocessor 7. In the year _____, first generation computer was established. a) 1971-present b) 1956-1963 c) 1964-1971 d) 1940-1956 8. _____ is an example of second generation computers. a) UNIVAC b) IBM 140, UNIVAC III, CDC 1640 c) IBM 360,PDP11 d) Pentium Core i5 9. ______is the basic component used in Second generation computers. a) Transistors b) Vacuum tubes c) Integrated Circuits d) Microprocessor 10. In the year _____, second generation computer was established. a) 1971-present b) 1956-1963 c) 1964-1971 d) 1940-1956 11. ______is an example of third generation computers. a) UNIVAC b) IBM 140, CDC 1640 c) IBM 360&370, PDP11 d) Pentium Core i5 12. Multi programming was introduced in ______generation. a) First b) Second c) Third d) Fourth
84 | Train the Trainers : Teacher’s Hand b ook
13. In the year _____, third generation computer was established. a) 1971-present b) 1956-1963 c) 1964-1971 d) 1940-1956 14. ______is the basic component used in third generation computers. a) Transistors b) Vacuum tubes c) Integrated Circuits d) Microprocessor 15. ______is the basic component used in fourth generation computers. a) Transistors b) Vacuum tubes c) ICs d) Microprocessor 16. Advantage of computer is ______. a) Diligence b) Depends on electricity c) Do not think by itself d) Cannot learn by experiences 17. ______is an example of fourth generation computers. a) UNIVAC b) IBM 140, CDC 1640 c) IBM 360, PDP11 d) Pentium Core i5 18. In the year _____, fourth generation computer was established. a) 1971-present b) 1956-1963 c) 1964-1971 d) 1940-1956 19. AI stands for ______, which the computer have in fifth generation computers. a) Artificial instrument b) Active intelligence c) Artificial intelligence d) Active Instrument 20. ______is used in fifth generation computers. a) Transistors b) Voice recognition c) Integrated Circuits d) Microprocessor 21. Voice or Pattern reorganization is part of ______generation. a) Second b) Fourth c) Fifth d) Third 22. Expansion of VLSIC is ______. a) Very Large Scale Integrated Circuits b) Very Large Scale Industry Circuits c) Very Large Secure Integrated Circuits d) Very Large Secure Industry Circuits 23. System that are interconnected are called ______. a) Internet b) Super Computer c) Server d) Mini computer 24. Mini Computers are also known as ______. a)Mid rate Computers b) Mid range computers c ) Low level System d) High range computers 25. Super computer consists of integrated ______. a) Micro processors b) Macro processor c) Semi processor d) Micro server
85 | Train the Trainers : Teacher’s Hand b ook
Answers
Q.NO Ans Q.NO Ans Q.NO Ans Q.NO Ans Q.NO Ans 1 B 2 C 3 A 4 B 5 A 6 B 7 D 8 B 9 A 10 B 11 C 12 C 13 C 14 C 15 D 16 A 17 D 18 A 19 C 20 B 21 C 22 A 23 A 24 B 25 A
86 | Train the Trainers : Teacher’s Hand b ook
Unit II - HARDWARE & SOFTWARE 1. A ______is a mouse lying on its back. a) Track ball b) Joystick c) Light pen d) Note taker 2. ______is an input device that enables you to enter drawings and sketches into the computer and it has 16 buttons. a) Mouse b) Touch screen c) Digitized tablet d) Joystick 3. ______is an input device that can read text or illustrations printed on paper. a) Mouse b) Scanner c) Digital camera d) Joystick 4. Images can be put into a computer using ______. a) Mouse b) MICR c) OCR d) Digital camera 5. ______is a pointing device that enables the user to interact with the computer by touching the screen. a) Touch sensitive screen b) MICR c) OCR d) Digital camera 6. Expand OCR ______. a) Optical Character Reader b) Optical Character Recognition c) Optical Code Reader d) Optical Card Reader 7. ______is an input device which reads a magnetic strip on ATM, Credit card etc. a) OMR b) OCR c) Magnetic Reader d) Bar code reader 8. ______is a device that captures natural handwriting on a surface onto a computer. a) Magnetic reader b) Touch pad c) OCR d) Notes taker 9. ______serves as a voice input device. a) Microphone b) Scanner c) Digital camera d) Joystick 10. ______is used as a pointing device on some portable computers (Laptop). a) Light pen b) Touch pad c)Joystick d) Notes taker 11. ______is similar to mouse except you can directly move the pointer and select the objects on the screen by pointing it with a pen. a) Digitized tablet b) Joystick c) Touch screen d) Light pen 12. ______Monitors are also called as RGB (Red Green Blue) monitors. a) Monochrome b) Grey scale c) Colour d) RGB 13. ______is a device that prints text or illustrations on paper (hard copy). a) Monitor b) printer c) scanner d) Notes taker 14. ______Printers are capable of printing entire line at a time. a) Daisy wheel b) Thermal c) Laser d) Line 87 | Train the Trainers : Teacher’s Hand b ook
15. ______Printer looks like a typewriter and is used in Railway Ticket Counter. a) Dot Matrix b) Laser c) Plotters d) Inkjet 16. ______Printers are used in Fax machines and calculator and the printed matters on the paper fade after a week or two. a) Laser b) Plotters c) Inkjet d) Thermal 17. ______Printer produces very good quality of graphic images. a) Laser b) Plotters c) Inkjet d) Thermal 18. ______controls the operation of input and output devices. a) IO System b) IO Device c) Control Unit d) Memory Unit 19. ______Printer use colour cartridges which combine Magenta, Yellow and Cyan links to create colour tones. a) Laser b) Plotters c) Inkjet d) Thermal 20. ______enables the computer to input, output and record sound. a) Headphone b) Sound card c) scanner d) Microphone 21. ______is the brain of the computer system. a) ALU b) MU c) CPU d) CU 22. ______is also called as VDU (Visual Display Unit). a) Printers b) Monitors c) Plotters d) Scanners 23. ______controls the entire system. a) ALU b) MU c) CU d) Monitor 24. ______Unit is used to store the data in the storage devices. a) ALU b) MU c) CU d) Monitor 25. ______Unit performs logical operations and Arithmetic calculations. a) ALU b) MU c) CU d) Monitor Answers
Q.NO Ans Q.NO Ans Q.NO Ans Q.NO Ans Q.NO Ans 1 A 2 C 3 B 4 D 5 A 6 B 7 C 8 D 9 A 10 B 11 D 12 C 13 B 14 D 15 A 16 D 17 A 18 A 19 C 20 B 21 C 22 B 23 C 24 B 25 A
88 | Train the Trainers : Teacher’s Hand b ook
UNIT III - OPERATING SYSTEM 1. Which command is used to list the files and directories in the root directory? a) Dir b) List c) Display d) Open 2. Which command is is used to view all the files and directories in page wise? a) dir/f b) dir/v c) dir/p d) dir/a 3. Which command is used to view all the files and directories in width wise? a) dir/ww b) dir/w c) dir/p d) dir/a 4. Which command is used to view all the files and directories in the subdirectories of the current drive? a) dir/s b) dir/c c) dir/sub d) dir/d 5. Which command is used to create a directory or sub directory? a) DIR b) CHDIR (or) CD c) RMDIR d) MKDIR (or) MD 6. Which command is used to change the current directory? a) CHDIR (or) CD b) DELDIR c) RMDIR d) MKDIR (or) MD 7. Which command is used to rename the file name? a. Ren
89 | Train the Trainers : Teacher’s Hand b ook
13. Which command is used to create, change a volume label name for a disk? a) labeldisk[drive name] b) label [drive name] c) labeldsk [drive name] d) dsklab[drive name] 14. Type command is used to ______. a) Write the content of the file b) View the content of the file c) Type the contents of the file d) Read the content of the file 15. The commands are entered through the ______in MSDOS. a) Mouse b) Keyboard c) Monitor d) CPU 16. A file is called as group of ______. a) Instruction b) Records c) Information d) Software 17. Find, Sort are ______commands. a) Internal b) External c) Menu d) None 18. Date, Time, Dir, Vol, Ver, Type, Copy etc. are______commands. a) Internal b) External c) Menu d) None 19. CD command is used to ______. a) open a CD disc b) rename CD disc c) change Directory d) copy Directory 20. Which command is used to display the time? a) Date b) Time c) Clock d) CLS 21. Which command is used to rename the directory? a) Copy b) Rename c) Change d) Modify 22. ______Command is used to delete the directory. a) Exit b) Clear c) Remove d) Delete 23. .______& ______are two wild card Option. a) ! and # b) ? and * c) & and % d) @ and # 24. Which command is used for sorting the directory by name (alphabetical order wise)? a) Dir/on b) Dir / od c) path d) view 25. Which command is used for sorting the directory in year wise? a) Dir/on b) Dir / od c) path d) view
90 | Train the Trainers : Teacher’s Hand b ook
Answers
Q.NO Ans Q.NO Ans Q.NO Ans Q.NO Ans Q.NO Ans 1 A 2 C 3 B 4 A 5 D 6 A 7 C 8 B 9 C 10 B 11 C 12 A 13 B 14 B 15 B 16 C 17 B 18 A 19 C 20 B 21 B 22 D 23 B 24 A 25 B
91 | Train the Trainers : Teacher’s Hand b ook
UNIT IV - INTRODUCTION TO LOGO 1. LOGO provides a primitive called ______a) CR b) PR c) TR d) DR 2. Shortcut to make the turtle visible is ______. a) HT b) ST c) RT d) FD 3. ______Keyword is used to find the product of two numbers. a) PR b) Multiply c) Product d) Asterisk 4. Which keyword is used to find the remainder value? a) Remain b) Remainder c) Product d) Round 5. Odd man out _____. a) ST b) CT c) TT d) RT 6. ______is an order given to the computer to perform some task. a) Input b) Command c) Home d) Halt 7. The most important control (box) within the commander is ______. a) Input b) Trace c) Home d) Halt 8. ______Command is used to erase the entire drawing in the graphics area and bring the turtle to the home position. a) HT b) CT c) RT d) CS 9. ______Command is used to bring the turtle to the home position. a) Step b) Trace c) Home d) Halt 10. The command used to turn the turtle towards right from its position is ______. a) HT b) ST c) RT d) LT 11. The ______button executes what is in the Input Box and is also pushed when you hit enter. a) Step b) Trace c) Halt d) Execute 12. The ______button immediately stops LOGO from processing further. a) Status b) Trace c) Halt d) Execute 13. ______Button is like a clear screen. a) Reset b) Trace c) Halt d) Execute 14. This button pops up a status window telling you what LOGO is up to ______. a) Status b) Trace c) Halt d) Execute 15. The command used to turn the turtle towards left from its position is ______. a) HT b) ST c) RT d) LT
92 | Train the Trainers : Teacher’s Hand b ook
16. ______will record all output including what you type into the Input box. a) Input Box b) Output/Command-Recall List Box c) Execute Button d) Step Button 17. The ______button turns on single stepping for debugging your programs. a) Pause b) Step c) Status d) Trace 18. The ______button stops LOGO so that you can examine variables, make changes or whatever. a) Pause b) Step c) Status d) Trace 19. _____ Command is used to make a program command, go to the edit mode after restarting the system. a) Execute b) Edall c) Step d) Reset 20. MSW LOGO is a ______language. a) Low level b) Assembly c) Interpreted d) High Level 21. This allows you to select the work area to be printed or saved. a) Bitmap Save command b) Bitmap Active Area command c) Bitmap Print command d) Bitmap Load command 22. ______command allows you to select the screen colour. a) Set Pen Colour b) Set Label Font Colour c) Set Flood Colour d) Set Screen Colour 23. ______command allows you to select the size of the pen in which the turtle will draw. a) Set Pen Size b) Set Label Font Colour c) Set Flood Colour d) Set Screen Colour 24. ______Keyword returns a positive square root. a) Round b) Multiply c) Product d) SQRT 25. The keyword used to add two numbers is______. a) ADD b) SUM c) PLUS d) SUB
Answers
Q.NO Ans Q.NO Ans Q.NO Ans Q.NO Ans Q.NO Ans 1 B 2 B 3 C 4 B 5 C 6 B 7 A 8 D 9 C 10 C 11 D 12 C 13 A 14 A 15 D 16 B 17 B 18 A 19 B 20 C 21 B 22 D 23 A 24 D 25 B
93 | Train the Trainers : Teacher’s Hand b ook
UNIT V - LOGO-ADVANCE COMMANDS 1. PC command is used for ______a) Personal Computer b) Pen colour c) Pen column d) None 2. PPT is a ______. a) Personal paint b) Pen Purple c) Pen Paint d) None 3. [000 000 000] is equivalent to ______. a) Black b) Blue c) White d) Pink 4. Syntax for display the current system date is ______. a) PD Time b) PR Month c) Date d) PR Date 5. ______command is used to convert all uppercase letters in a text string to lowercase. a) Shift+F3 b) F3 c) Lowercase d) Logo Lower 6. ______command is used to fill the pen’s colour on any closed shape. a) Back b) Filter c) Fill d) Restore 7. Syntax for display the current system time is ______a) PD Time b) PR Time c) Date d) Time 8. ______command is used to convert all lowercase letters in a text string to uppercase. a) Shift+F3 b) PR Uppercase c) Date d) PR Lower 9. ______command is used to set the pen’s position to UP, without changing its mode. a) PD b) PE c) PPT d) PU 10. ______command is used to set the pen’s position to down, without changing its mode. a) PD b) PE c) PPT d) PU 11. ______command is used to set the pen’s position to down and mode to ERASE. a) PD b) PE c) PPT d) PU 12. ______command is used to set the pen’s position to down and mode to PAINT. a) PD b) PE c) PPT d) PU 13. [255 2555 255] is equivalent to ______. a) Black b) Blue c) White d) Pink 14. ______command is used to set the pen to normal use. a) PD b) PE c) PPT d) PU 15. ______command is used to set the required colour on the pen. a) SET PC b) SET FC c) SETSC d) PU 16.______command is used to set the Background/ graphics area in color of your choice. a) SET PC b) SET FC c) SETSC d) PU 94 | Train the Trainers : Teacher’s Hand b ook
17. [255 000 000] is equivalent to ______. a) Black b) Blue c) White d) Red 18. ______command is used to set the screen background. a) SET PC b) SET FC c) SETSC d) PU 19. ______command is used to exit from LOGO & returns to the operating system. a) Stop b) BYE c) EXIT d) END 20. [000 255 000] is equivalent to ______. a) Black b) Blue c) White d) Green 21. [000 000 255] is equivalent to ______. a) Black b) Blue c) White d) Pink 22.______commands exit from LOGO . a. end b. last c. exit d. bye 23. PC commands is used for ______. a. personal computer b. pencolor c. pencoloumn d. none 24. PPT is a ______. a. Personal paint b. penpaint c. penturtle d. none 25. Which one is used to sets the pens position to down? a. PENUP b. PENDOWN c. PENERASE d. PENPAINT
Answers
Q.NO Ans Q.NO Ans Q.NO Ans Q.NO Ans Q.NO Ans 1 B 2 C 3 A 4 D 5 C 6 C 7 D 8 B 9 D 10 A 11 B 12 C 13 C 14 C 15 A 16 B 17 D 18 C 19 B 20 D 21 B 22 C 23 B 24 B 25 B
95 | Train the Trainers : Teacher’s Hand b ook
Annexure V b – Question Bank – Certificate in Office Automation
IECD Institute for Entrepreneurship and Career Development Bharathidasan University,Tiruchirappalli – 620 023
Certificate in Office Automation Course Code –COA
UNIT I - OFFICE AUTOMATION 1. The term ______refers to all software programs. a) Process automation b) Office automation c) Both a & b d) None of the above 2. ______is a set of instructions. a) Hardware b) Software c) Application d) All of the above 3. A ______is an organized list of instructions that when executed, causes the computer to behave in a predetermined manner. a) Hardware b) Software c) Application d) Program 4. Which of the following is not a programming language? a) C b) C++ c) MS Office d) Java 5. Odd man out. a) BASIC b) FORTRAN c) COBAL d) MS Office 6. Low level languages are called ______. a) Human language b) Machine language c) High language d) Assembly language 7. ______programs are translated into machine language by a program called an assembler. a) Human language b) Machine language c) High language d) Assembly language 8. Low level languages are closer to the ______. a) Human language b) Machine language c) Computer language d) Assembly language 9. High level languages are closer to the ______. a) Human language b) Machine language c) Computer language d) Assembly language 10. ______is performed by compilers, interpreters and assemblers. a) Instruct b) Translation c) Both a & b d) None of the above 11. There are ______types of software. a) 3 b) 4 c) 2 d) 5 12. ______is a general term for the various kinds of programs. a) Hardware b) Software c) Application d) All of the above
96 | Train the Trainers : Teacher’s Hand b ook
13. The term ______describes the physical aspects of computers and related devices. a) Hardware b) Software c) Application d) All of the above 14.______software is designed to help the user to perform singular or multiple related specific tasks. a) System b) Software c) Application d) Program 15. Example for application software______. a) Word processors b) Spreadsheets c) Both a & b d) None of the above 16. ______software is designed to operate the computer hardware. a) System b) Software c) Application d) Program 17. ______provides a platform for running application software. a) Application software b) System software c) Both a & b d) None of the above 18. ______manages and controls computer hardware so that application software’s can perform. a) Application software b) System software c) Both a & b d) None of the above 19. Example for System software is ______. a) Linux b) Microsoft windows c) Both a & b d) None of the above 20. ______helps to run the computer hardware and computer system. a) Application software b) System software c) Both a & b d) None of the above 21. ______includes operating system, device drivers, tools, servers etc., a) Application software b) System software c) Both a & b d) None of the above 22. ______is the process of writing, testing and debugging. a) Programming language b) Computer programming c) Application d) Software 23. A ______is a computer language that programmers use to develop applications. a) Programming language b) Computer programming c) Application d) Software 24. First generation computers used on ______. a) Machine language b) Assembly language c) Human language d) None of the above 25. Assembly language was used in ______generation. a) First b) Second c) Third d) Fourth
97 | Train the Trainers : Teacher’s Hand b ook
Answers Q.NO Ans Q.NO Ans Q.NO Ans Q.NO Ans Q.NO Ans 1 B 2 B 3 D 4 C 5 D 6 D 7 D 8 C 9 A 10 B 11 C 12 B 13 A 14 C 15 C 16 A 17 B 18 B 19 C 20 B 21 B 22 B 23 A 24 A 25 B
98 | Train the Trainers : Teacher’s Hand b ook
UNIT II - INTRODUCTION TO MS- WORD 1. To leave a space between two characters ______. a) Delete b) Backspace c) Space bar d) Tab 2. Startall programs ______._ MS Word 2003. a) Accessories b) MS Office c) My documents d) My computer 3. To open a new file, ______. a) File open b) file new c) Edit new d) edit open 4. The file extension for MS Word is ______. a) .dot b) .doc c) .dom d) .txt 5. ______enables to quickly move to any location in your document. a) Document map b) Direction c) Copy file d) Cut file 6. ______is used to insert page number for each page. a) Page break b) Page number c) Page border d) None of the above 7. ______is used to place a link to any document stored on your computer. a) Hyperlink b) Hypertext c) Mail merge d) None of the above 8. ______key is used to close the window. a) Ctrl+ F4 b) alt+ f4 c) ctrl+ s d) ctrl+ v 9. There are ______types of letter cases. a) 3 b) 4 c) 5 d) 6 10. ______is used to capitalize the first letter of the first word in the selected sentences. a) Sentence case b) Upper case c) Lower case d) Toggle case 11.______changes all selected text to lowercase letters. a) Sentence case b) Upper case c) Lower case d) Toggle case 12. ______changes all selected text to uppercase letters. a) Sentence case b) Upper case c) Lower case d) Title case 13. ______is used to capitalize the first letters of each word in the selection. a) Sentence case b) Upper case c) Lower case d) Title case 14. ______is used to change all uppercase to lowercase and lowercase to uppercase in the selection. a) Sentence case b) Upper case c) Lower case d) Toggle case 15. Way to insert page number ______. a) Insert page number b) File page number c) Edit page number d) View page number
99 | Train the Trainers : Teacher’s Hand b ook
16. ______allows you to set the amount of space between the lines. a) Tab space b) Intend space c) Line spacing d) All of the above 17. ______allows you to change the typing direction of your text from left to right or right to left. a) Navigation b) Down arrow c) Text orientation d) None of the above 18. Beginning of the line ______. a) Home b) End c) Ctrl+ home d) Ctrl+ end 19. ______ picture auto shapes. a) File b) View c) Insert d) Edit 20. To remove space in left of the cursor ______key. a) Enter b) Backspace c) Delete d) End 21. Shortcut key for cut ______. a) Ctrl+ v b) Ctrl+ s c) Ctrl+ p d) Ctrl+ x 22. Shortcut key for paste ______. a) Ctrl+ v b) Ctrl+ z c) Ctrl+ c d) Ctrl+ o 23. Shortcut key for save ______. a) Ctrl+ v b) Ctrl+ s c) Ctrl+ p d) Ctrl+ y 24. Shortcut key for copy ______. a) Ctrl+ v b) Ctrl+ c c) Ctrl+ p d) Ctrl+ x 25. Shortcut key for print ______. a) Ctrl+ v b) Ctrl+ s c) Ctrl+ p d) Ctrl+ x
Answers Q.NO Ans Q.NO Ans Q.NO Ans Q.NO Ans Q.NO Ans 1 C 2 B 3 B 4 B 5 A 6 B 7 A 8 B 9 C 10 A 11 C 12 B 13 D 14 D 15 A 16 C 17 C 18 A 19 C 20 B 21 D 22 A 23 B 24 B 25 C
100 | Train the Trainers : Teacher’s Hand b ook
UNIT III - INTRODUCTION TO MS-EXCEL 1. ______is a spread sheet program. a) MS- Excel b) MS- word c) MS- access d) None of the above 2. Excel is a ______. a) Notebook b) Notepad c) Workbook d) WordPad 3. Excel can hold many ______. a) Notebook b) Notepad c) Worksheets d) None of the above 4. The worksheet is a grid of ______. a) Table & matrix b) Columns & rows c) Rows& tables d) All of the above 5. In worksheets, the column& rows are designated by ______a) Letters& numbers b) Special character & number c) Numbers & letters d) None of the above 6. Which of the following components is MS-Excel.______. a) Electronic spread sheet b) Database management c) Generation of chart d) All of the above 7. Workbook provides ______worksheets. a) 4 b) 2 c) 3 d) 5 8. Excel has the facility to increase ______. a) Number of workbook b) Number of note books c) Number of notepad d) Number of worksheets 9. Each sheet provides ______columns and ______rows. a) 256, 65000 b) 200, 65536 c) 256, 65536 d) 250, 65100 10. Start all programs MS-Office ______. a) Notepad b) WordPad c) MS- Dos d) MS- Excel 11. Which displays the document name followed by a program name? ______. a) Title bar b) Word pad c) Scroll bar d) All of the above 12. The ______is directly below the title bar. a) Status bar b) Scroll bar c) Tool bar d) Menu bar 13. Which is the default file name of excel? a) Note 1 b) Book 1 c) Excel 1 d) None of the above 14. Click ______to create a new blank worksheet. a) New b) Save c) Open d) Save as
101 | Train the Trainers : Teacher’s Hand b ook
15. Click ______option to save the current spread sheet. a) Open b) New c) Exit d) Save 16. Click ______option to close the excel window. a) Open b) New c) Exit d) Save 17. Click ______to open a previously saved spread sheet. a) New b) Save c) Open d) Save as 18. ______option is used to print the document. a) Open b) Print preview c) Print d) Copy 19. ______is used to view the potential print of the document. a) Print b) Print layout c) Print preview d) All of the above 20. ______option is used to copy the current selection to the clipboard. a) Cut b) Copy c) Paste d) Undo 21. Shortcut key for copy ______. a) Ctrl+ o b) Ctrl+ c c) Ctrl+ n d) Ctrl+ s 22. ______allows a drop-down menu of available mathematical operations to perform. a) Submenu b) Auto sum c) Chart wizard d) None of the above 23. ______is used to sort the current selection in ascending order. a) Filter b) Sorting c) Sort ascending d) All of the above 24. ______is a used to combine two selected cells into one new cell. a) Wrap text b) Center c) Merge& center d) Align right 25. This symbol represents the ______. a) Table b) Border c) Cell d) None of the above
Answers Q.NO Ans Q.NO Ans Q.NO Ans Q.NO Ans Q.NO Ans 1 A 2 C 3 C 4 B 5 A 6 D 7 C 8 D 9 C 10 D 11 A 12 D 13 B 14 A 15 D 16 C 17 C 18 C 19 C 20 B 21 B 22 B 23 C 24 C 25 B
102 | Train the Trainers : Teacher’s Hand b ook
UNIT IV - FORMULAS AND FUNCTIONS 1. The unique feature of a spread sheet program is ______. a) Word b) Excel c) Power point d) Access 2. ______allows you to create mathematical formulas& execute functions. a) Word b) Excel c) Power point d) Access 3. Every formula must begin with an ______sign. a) = b) + c) % d) / 4. Formula for linking worksheet is ______. a) A1+ sheet2 b) =A1+ sheet2 c) =A1+ sheet2! A2 d) None of the above 5. Addition, multiplication, subtraction& division are ______calculation. a) Logical b) Condition c) Relational d) Mathematical 6. The ______icon on the standard toolbar automatically adds a column of numbers. a) Sum b) Auto sum c) Merge d) Function 7. ______symbol used for adding a two number. a) * b) = c) + d) % 8. ______symbol used for multiplication. a) * b) = c) + d) % 9. ______symbol used for subtraction. a) * b) ^ c) - d) + 10. ______symbol used for exponential. a) * b) ^ c) - d) + 11. When entering a mathematical formula, precede the formula with a ______sign. a) Plus b) Minus c) Equal d) None of the above 12. You can add ______to separate thousands. a) Commas b) Semicolon c) Colon d) None of the above 13. Function is ______formulas. a) Pre- defined b) User- defined c) Both a& b d) None of the above 14. ______allow you to quickly& easily find an average, highest number etc. a) Functions b) Format c) Both a& b d) None of the above 15. Which of the following is not a function? a) TODAY b) NOW c) IF d) ADD 103 | Train the Trainers : Teacher’s Hand b ook
16. In ______, you can execute a basic descending or ascending sort based on one column. a) Word b) Excel c) Power point d) Access 17. Sort ascending means ______order. a) A- Z b) Z- A c) Both a& b d) None of the above 18. Sort descending means ______order. a) A- Z b) Z- A c) Both a& b d) None of the above 19. Select ______from the menu bar. a) Viewsort b) Data sort c) Edit sort d) None of the above 20. Portrait& landscape are under the ______menu. a) File b) Edit c) Page layout d) None of the above 21. The size of the worksheet on the page can also be formatted under the ______title. a) Scaling b) Page break c) Page tab d) None of the above 22. To set ______within the worksheet, select the row you want to appear. a) Page break b) Page tab c) Page setup d) All of the above 23. Choose ______from the menu bar. a) Insert page break b) Insert page setup c) Page break Insert d) None of the above 24. To view page setup select ______from the menu bar. a) Page setup b) Edit page setup c) File page setup d) View page setup 25. ______option includes changing the font, size & style. a) Format text b) Edit text c) Delete d) Save
Answers Q.NO Ans Q.NO Ans Q.NO Ans Q.NO Ans Q.NO Ans 1 B 2 B 3 A 4 C 5 D 6 B 7 C 8 A 9 C 10 A 11 C 12 A 13 A 14 A 15 D 16 B 17 A 18 B 19 B 20 C 21 A 22 A 23 A 24 C 25 A
104 | Train the Trainers : Teacher’s Hand b ook
UNIT V - INTRODUCTION TO MS POWER POINT 1. ______is a graphical presentation program. a) Word b) Excel c) Access d) Power point 2. ______is the top of the power point window. a) Menu bar b) Task bar c) Title bar d) Tool bar 3. ______includes file, edit, view& etc. a) Menu bar b) Task bar c) Title bar d) Tool bar 4. ______used to create a new presentation. a) Ctrl+ o b) Ctrl+ c c) Ctrl+ n d) Ctrl+ v 5. ______wizard gives you a set of exiting slides & designs. a) Auto content b) Existing c) Design d) Slides 6. ______used to open the existing file. a) Ctrl+ o b) Ctrl+ c c) Ctrl+ n d) Ctrl+ v 7. File extension to save power point presentation is ______. a) .ppt b) .doc c) .jpg d) .txt 8. Click the ______button on the formatting toolbar to open a new slide. a) Edit slide b) New slide c) Delete slide d) None of the above 9. ______allows you to select the size of the slides. a) Page border b) Page number c) Page setup d) None of the above 10. ______used to set portrait or landscape mode . a) Page border b) Page number c) Page setup d) Page orientation 11. There are ______different ways to view your presentation in power point. a) 3 b) 5 c) 4 d) 6 12. ______view displays a single slide as it appears in the presentation. a) Slide sorter b) Normal c) Notes page d) Slide show 13. ______can be added to the bottom of the normal view window. a) Slide sorter b) Normal c) Notes page d) Speaker notes 14. ______view shows a miniature version of all your slides. a) Slide sorter b) Normal c) Notes page d) Slide show 15. In ______view you can reorder the slides by dragging and dropping. a) Slide sorter b) Normal c) Notes page d) Speaker notes 16. You can hide the slides in ______view. a) Notes page b) Slide show c) Normal d) Slide sorter 105 | Train the Trainers : Teacher’s Hand b ook
17. ______view allows the speaker to create notes to use during a presentation. a) Notes page b) Slide show c) Normal d) Slide sorter 18. ______view will displays the slides in a presentation with sound and animation. a) Slide sorter b) Normal c) Notes page d) Slide show 19. ______gives you a mini-slide view of your presentation. a) Notes page b) Slide show c) Normal d) Slide sorter 20. Click on the desired slide to select and press the ______key to delete. a) Delete b) Backspace c) Insert d) None of the above 21. ______allows you to view and run your presentation in the full-screen mode. a) Slide sorter b) Normal c) Notes page d) Slide show 22. Press ______key to run the presentation. a) F4 b) F6 c) F5 d) F7 23. Press ______key to move to the first slide. a) End b) Home c) PgUp d) Pgdn 24. Press ______key for move to the first slide. a) End b) Home c) PgUp d) Pgdn 25. Press ______key to stop the slide show. a) End b) Home c) Enter d) Esc
Answers Q.NO Ans Q.NO Ans Q.NO Ans Q.NO Ans Q.NO Ans 1 D 2 C 3 A 4 C 5 A 6 A 7 A 8 B 9 C 10 D 11 C 12 B 13 D 14 A 15 A 16 D 17 A 18 D 19 D 20 A 21 D 22 C 23 B 24 A 25 D
106 | Train the Trainers : Teacher’s Hand b ook
Annexure V c – Question Bank – Certificate in Programming Techniques
IECD Institute for Entrepreneurship and Career Development Bharathidasan University,Tiruchirappalli – 620 023
Certificate in Programming Techniques
Course Code –CPT
UNIT I - NETWORKS 1. A Computer ______consists of a collection of computer and other equipment. a. Network b. Modem c. ISP d. Web site 2. A computer network is usually made for more than ______computers. a. one b. two c. three d. zero 3. There are ______types of network configuration. a. one b. two c. three d. many 4. ______network is implemented for less than ten computers. a. Client/Server b. Peer to peer c. MAN d. WAN 5. Which network is suitable for larger networks? a. Peer to Peer b. LAN c. Client/Server d. None of these 6. Files such as ______can be shared across the network. a. Word Processing b. Spreadsheet c. Images d. All of the above 7. Which device can be connected in the network? a. Printers b. Scanners c. Fax d. All of the above 8. ______acts as the storage location for files and applications shared on the network. a. Client b. Server c. Memory Card d. None of the above 9. Usually, ______performance is higher than the average computers. a. Client b. Server c. Memory Card d. None of the above 10. ______controls the network access of the client computers. a. Client b. Server c. Memory Card d. None of the above 11. Which one is not belong to the characteristics of computer network? a. We can play CD music from one computer while sitting on another computer b. We can connect printer to one computer and let the other computer print that printer c. We can connect Fax and scanner d. All of the above 12. ______network is used only for the small physical area. a. WAN b. LAN c. MAN d. All the above 107 | Train the Trainers : Teacher’s Hand b ook
13. LAN stands for ______. a. Local Area Network b. Land Area Network c. Large Area Network d. Large And Network 14. LAN can be classified into ______types. a. one b. two c. three d. many 15.______and ______are two types of Local Area Network. a. Wired and Wireless b. Wired and Aerial b. Wired and Cable d. Blue Tooth and WIFI 16. MAN stands for ______. a. Main Area Network b. Mini Area Network c. Metropolitan Area Network d. Microsoft Network 17. Routers, switches and hubs are connected to create a ______a. WAN b. LAN c. MAN d. All the above 18. To create a Metropolitan Area Network, ______to be connected. a. Routers b. Switches c. Hubs d. All of these 19. ______can span up to 50kms. a. CAN b. MAN c. PAN d. LAN 20. MAN can span upto ______kms a. 20 b. 30 c. 40 d. 50 21. WAN stands for ______. a. Wide Area Network b. Wireless Network c. Whole Area Network d. Wide Angle Network 22. A ______is a computer network that covers a broad area. a. WAN b. LAN c. MAN d. All the above 23. PAN stands for ______. a. Personal Area Network b. Permanent Area Network c. Personnel Area Network d. Print Area Network 24. CAN stands for ______. a. Campus area network b. Crime Area Network c. Campus and network d. City network 25. The largest and most well-known example of the WAN is the ______. a. Computer b. Blog c. Internet d. Firewall
108 | Train the Trainers : Teacher’s Hand b ook
Answers Q.NO Ans Q.NO Ans Q.NO Ans Q.NO Ans Q.NO Ans 1 A 2 B 3 B 4 B 5 C 6 D 7 D 8 B 9 B 10 B 11 D 12 B 13 A 14 B 15 A 16 C 17 C 18 D 19 B 20 D 21 A 22 A 23 A 24 A 25 C
109 | Train the Trainers : Teacher’s Hand b ook
UNIT II - MSDOS & BASIC PROGRAMMING 1. An ______is a computer program that manages the resources of a Computer. a. Operating System b. CPU c. Hardware d. None 2. OS stands for ______. a. Operating System b. Operation Success c. Oracle System d. Ordinary System 3. ______is software that control and manage the hardware. a. Operating System b. CPU c. Hardware d. None 4. ______acts as basic software of the computer machine. a. Operating System b. CPU c. Hardware d. None 5. ______is the most well Known operating system. a. BASIC b. MS-DOS c. Unix d. Linux 6. MS-DOS is the acronym for ______. a. Micro soft Desk Operating System b. Microsoft Disk Operating System c. Micro soft Device Operating System d. Mini system device operating system 7. MS DOS was created in ______. a. 1991 b. 1981 c. 1998 d. 2001 8. Latest version of MS DOS is ______. a. 2.0 b. 3.0 c. 7.0 d. 2.7 9. MS DOS is ______. a. Case sensitive b. Not case sensitive c. Context sensitive d. None of the above 10. Which is not a DOS command? a. Date b. Time c. Clear d. cls 11. ______command redirects disk operation on one drive to another. a. Assign b. Append c. Copy d. Erase 12. ______command does not work with format, diskcopy, backup etc. a. Assign b. Append c. Copy d. Erase 13. ______command is used to clear the screen of all previous text. a. Assign b. clear c. cls d. Erase 14. ______command copies files from one location to another location. a. Assign b. Append c. Copy d. Erase 15. ______command is used to remove files from the disk. a. Assign b. Append c. Copy d. Erase
110 | Train the Trainers : Teacher’s Hand b ook
16. ______command is used to access the information and help file from MS DOS prompt. a. Help b. Append c. Copy d. Erase 17. ______command is used to display and change the current date of the computer a. Assign b. Date c. Copy d. Erase 18. ______command is used to view and edit the current time a. Date b. time c. change d. cd 19. ______command is used to move files or directories from one folder to another. a. Assign b. move c. Copy d. Erase 20. ______command allows the user to view a listing of files and folders in an easy to read listing. a. Tree b. Append c. Copy d. Erase 21. Expansion of BASIC ______. a. Beginners All Purpose Symbolic Instruction Code b. Beginners All Purpose Symbol Instruction Code c. Beginners For Purpose Symbolic Instruction Code d. All of these 22. BASIC was developed in ______. a. Darthmouth College, USA b. Darthmouth College, UK c. Dental College, USA d. America 23. BASIC was developed by ______. a. John G Kemeny and Thomas E. Kurtz b. John Thomas and E. Kurtz c. John G Kemeny and Edison d. John Alpert and Thomas E. Kurtz 24. BASIC was developed in ______. a. 1994 b. 1984 c. 1964 d. 2011 25. A Version of BASIC is ______. a. BASICA b. QBASIC c. GWBASIC d. All of the above Answers Q.NO Ans Q.NO Ans Q.NO Ans Q.NO Ans Q.NO Ans 1 A 2 A 3 A 4 B 5 B 6 B 7 B 8 C 9 B 10 C 11 A 12 A 13 C 14 C 15 D 16 A 17 B 18 B 19 B 20 A 21 A 22 A 23 A 24 C 25 D
111 | Train the Trainers : Teacher’s Hand b ook
UNIT III - DATABASE 1.______is a collection of facts such as values or measurements. a. Data b. Field c. Text d. Record 2. A ______is a computerized record keeping systems. a. Spread Sheet b. Word Processor c. Data Base d. All of the above 3. Expansion of DBMS is ______. a. Data Base Management System b. Data Base Manage System c. Data Base Managing System d. Data Base Managed System 4. ______is a collection of programs that enables you to store, modify and extract information from a database. a. Spread Sheet b. Word Processor c. Data Base d. All 5. Choose the examples for applications of database______. a. Computerized library system b. ATM c. Flight Reservation System d. All of the above 6. ______field is used to define the multi lined text. a. Date b. Logic c. Numeric d. Memo 7. Odd Man Out . a. Soft BASE b. Oracle c. MS-Access d. Paint 8. Database is a collection of ______. a. Word b. Letter c. Records d. folder 9. Start All Programs______MS-Access a. Accessories b. Ms office c. My computer d. My document 10. ______is defined as a smallest unit in the database. a. Row b. Column c. Field d. Record 11. ______categories of fields are available in database. a. 6 b. 4 c. 5 d. 8 12. ______can be defined to retrieve information from the tables. a. Report b. Forms c. Queries d. Tables 13. The set of related fields are called ______. a. Field b.Record c. Table d. All of the above 14. ______is the collection of logically related records. a. Database b. Row c. Field d. Record 15. Using ______files can be retrieved easily and effectively. a. DBMS b. DBM c. IBM d. None of the above 112 | Train the Trainers : Teacher’s Hand b ook
16. Choose the DBMS package______. a. dBASE III Plus b. FoxBASE c. Foxpro d. All of the above 17. Choose the purpose of Database system ______. a. Integrity Problems b. Security Problem c. Data isolation d. All of the above 18. There are ______types of data models. a. 2 b. 3 c. 4 d. Many 19. ______and ______are two types of data models. a. Object based, record based b. Object based, field based c. Record based, field based d. Field based , table based 20. ______is the collection of records that identify categories. a. Table b. Row c. Field d. Record 21. Each ______contains a unique instance of data. a. Table b. Row c. Field d. Record 22. ______is a formal description of the table, columns, domains and constraints. a. Meta Variable b. Data Meta c. Meta Data d. None of the above 23. ______is the MsOffice Package. a. SQL b. MSAccess c. Foxpro d. Oracle 24. Tables, Queries, Forms and Reports are the components of ______. a. Excel b. Word c. Power-Point d. Access 25. ______is a single characteristic or attribute of a person, place, object or idea. a. Table b. Row c. Field d. Record
Answers Q.NO Ans Q.NO Ans Q.NO Ans Q.NO Ans Q.NO Ans 1 A 2 C 3 A 4 C 5 D 6 D 7 D 8 C 9 B 10 C 11 C 12 C 13 B 14 A 15 A 16 D 17 D 18 A 19 A 20 A 21 B 22 C 23 B 24 D 25 C
113 | Train the Trainers : Teacher’s Hand b ook
UNIT IV - MS ACCESS 1. ______provides a quick and easy way to modify and insert records into your database. a. Query b. Table c. Report d. Form 2. MS Access does a very good job of creating a form using ______. a. Wizard b. Design view c. Data sheet view d. None 3. Access will allow you to add, modify, and delete records in ______view. a. Report b. Edit c. Forms d. None 4. To delete a record with a Form, display the record in Form View and select the ______command in the Edit Menu. a. Delete b. Cascade c. Delete Record d. Record Delete 5. Delete Record command is in ______menu. a. File b. Edit c. View d. Insert 6. ______wildcard character is used to match any single numeric character. a. * b. [ ] c. ? d. # 7. # - is used to match any single ______character. a. Numeric b. String c. Both a & b d. All 8. What is the purpose of [ ] this wild card character? a. Match any single alphabetic character b. Match any single character within the brackets c. Both a & b d. None of the above 9.______wild card option is used to match any character not within brackets. a. * b. [ ] c. ! d. # . 10. ______wild card option is used to match any character within brackets. a. * b. [ ] c. ! d. # . 11. ______wild card option is used to match any single alphabetic character. a. ? b. [ ] c. ! d. # . 12. ______wild card option is used to match any number of characters. a. * b. [ ] c. ! d. # . 13. ______wild card option is used to match any one of a range of characters. a. - b. [ ] c. ! d. # . 14. MS Access allows you to print your form of ______. a. One record b. A range of records c. All the records d. All of the above 15. ______command is used to print the selected records. a. File Print b. Edit print c. Format print d. Table print 114 | Train the Trainers : Teacher’s Hand b ook
16. ______are the statements used to retrieve information. a. Queries b. Forms c. Data d. Table 17. How many types of Query is available in MS Access? a. 1 b. 2 c. 3 d. 4 18. A ______query gathers, collates and presents information in usable forms. a. Action b. Select c. Access Query d. None 19.______and ______are the two types of queries. a. Action , Query b. Select , Action c. Select ,Query d. Select , Uniform 20. In contrast to a filter, a query is ______. a. User friendly b. reusable c. not reusable d. None 21.______Query makes changes in specified records of an existing table. a. Action b. Select c. Access Query d. None 22. ______allows the selection criteria and/or sorting instructions to be saved and reused a. Forms b. Reports c. Table d. Query 23. – What is the name of this icon? a. Forms b. Reports c. Table d. Query 24. We can view the records that match particular criteria by creating a query that uses a ______. a. Pattern Match b. Match Pattern c. Match query d. All of the above 25. ______wild card characters allow you to create much more flexible patterns. a. * b. ? c. # d. All of the above
Answers Q.NO Ans Q.NO Ans Q.NO Ans Q.NO Ans Q.NO Ans 1 D 2 A 3 C 4 C 5 B 6 D 7 A 8 B 9 C 10 B 11 A 12 A 13 A 14 D 15 A 16 A 17 B 18 B 19 B 20 B 21 A 22 D 23 D 24 A 25 D
115 | Train the Trainers : Teacher’s Hand b ook
UNIT V - INTROCUCTION TO VISUAL BASIC & HTML 1. Visual Basic evolves from ______. a. BASIC b. FORTRAN c. COBOL d. C 2. BASIC syntax is similar to ______language. a. BASIC b. FORTRAN c. COBOL d. C 3. Acronym of FORTRAN is ______. a. Formula Translation b. Format Translation c. For Transpose d. None 4. BASIC was used primarily for ______computing. a. Calculation b. Interactive c. Expensive d. Exclusive 5. FORTRAN was used in ______environment. a. Unit wise b. Batch – processing c. Unit Processing d. None 6. ______introduced GW-Basic with its DOS. a. Microsoft b. Sun microsystem c. DOS d. None 7. To improve execution speed, BASIC ______were introduced a. Compiler b. Interpreter c. Inverter d. None 8. A version of BASIC compiler by Microsoft is ______a. BASIC b. Quick Basic c. FORTRAN d. None 9. ______is a kind of language processor that translates a source program into machine language. a. Compiler b. Interpreter c. Inverter d. None 10. ______is fairly closed to the machine language. a. Compiler b. Interpreter c. Pseudo-code d. None 11. Quick Basic is a ______oriented language. a. Machine b. Compiler c. Procedure d. None 12. GUI stands for ______. a. Graphical Unit Interchange b. Graphic User Interface c. Graphic User Interpreter d. None of the above 13. Visual Basic (VB) arrived in the year ______. a. 1991 b. 1992 c. 2001 d. 2005 14. The first version of VB had ______editions a. 2 b. 3 c. 4 d. Many 15. Earlier version of VB were written for ______bit Operating System. a. 2 b. 4 c. 8 d. 16 116 | Train the Trainers : Teacher’s Hand b ook
16. ADO stands for ______. a. Active Digital Object b. ActiveX Data Object c. Acting data object d. None 17. VB.NET was introduced in ______year. a. 1991 b. 1992 c. 2001 d. 2005 18. ______provides convenient intelligence hints to the developer. a. VB.NET 2008 b. VB.NET 2001 c. VB.NET 2005 d. None 19. Visual Basic can able to create an ______file a. Source b. Target c. Execution d. None 20. Microsoft released Visual Studio.NET in ______. a. 2001 b. 2003 c. 2002 d. 2005 21.Visual Basic version 2 was introduced in ______. a. 1992 b. 1993 c. 1996 d. 1997 22.Visual Basic version 3 was introduced in ______. a. 1992 b. 1993 c. 1996 d. 1997 23. Visual Basic version 4 was introduced in ______. a. 1992 b. 1993 c. 1996 d. 1997 24. Visual Basic version 5 was introduced in ______. a. 1992 b. 1993 c. 1996 d. 1997 25. Visual Basic version 6 was introduced in ______. a. 1998 b. 1993 c. 1996 d. 1997 26. Visual Basic .NET was introduced in ______. a. 1992 b. 2001 c. 1996 d. 1997
Answers Q.NO Ans Q.NO Ans Q.NO Ans Q.NO Ans Q.NO Ans
1 A 2 B 3 A 4 B 5 B 6 A 7 A 8 B 9 A 10 C 11 C 12 B 13 A 14 A 15 D 16 B 17 C 18 A 19 C 20 C 21 A 22 B 23 C 24 D 25 A 26 B
117 | Train the Trainers : Teacher’s Hand b ook
Annexure V d – Question Bank – Certificate in Programming
IECD Institute for Entrepreneurship and Career Development Bharathidasan University,Tiruchirappalli – 620 023
Certificate in C Programming Course Code –CCP UNIT I - INTRODUCTION TO C 1. A group of programs developed for certain purpose are referred as ______. a. Program b. Variable c. Software d. Data 2. The electronic components of the computers are known as ______. a. Hardware b. Variable c. Software d. program 3. Software is classified into ______types. a. 2 b. 3 c. 4 d. None 3. ______software is a collection of system programs. a. System b. Application c. Program d. Data 4. ______software is a collection of programs meant for specific application. a. System b. Application c. Program d. Data 5. A program is developed using a ______language. a. High Level b. Low level c. Procedural d. English 6. Developing a program using ______language is called program development. a. High Level b. Low level c. Procedural d. English 7. Entering the developed program into computer is called ______a. Program Editing b. Program Entering c. Program development d. Execution 8. The process of translating the edited program as an executable machine code is called ______a. Translation b. Program Entering c. Program development d. Execution 9. Normally, the editor is provided along with the ______a. Assembler b. Compiler c. Converter d. translator 10. C. was developed in the year ______a. 1970 b. 1971 c. 1972 d. 1980 11. C. was developed by ______a. BjarneStroustrup b. Dennis Ritchie c.James Gosling d. Ken Thompson 12. C was developed at ______. a. AB & B Laboratory, U.S.A b. AT & T Bell Laboratory, U.S.A c. AT & T Laboratory, UK d. AT & T Bell Laboratory, USSR
118 | Train the Trainers : Teacher’s Hand b ook
13. C was mainly influenced by the languages ______a. Java & C++ b. Java & COBOL c. BCPL & B d. BCPL & C++ 14. B. language was developed in the year ______a. 1970 b. 1971 c. 1972 d. 1980 15. B language was developed by ______- a. BjarneStroustrup b. Dennis Ritchie c. James Gosling d. Ken Thompson 16. The name C was derived from the languages ----- a. B & CPL b. CPL & C++ c. B & BCPL d. C & C# 17.C program should run through a ______a. Interpreter b. Compiler c. Loader d. Data 18. Executable code will have the extension ______a. .txt b. .c c. .exe d. exg 19. The C program is the ______readable form. a. Machine b. Human c. Mobile d. All of the above 20. The Executable code is the ______readable form. a. Machine b. Human c. Mobile d. All of the above 21. ______is the C compiler for UNIX Machine. a. cc or gcc b. c or bb c. BCPL or B d. All of the above 22. ______is the widely used commercial compiler. a. Microsoft Visual C++ Environment b. Sun Microsystem c. Microsoft C++ d. ANSI C 23. In include section, ______files must be included. a. header b. footer c. executed d. All 24. ______function should be present in all C programs. a. main() b. sqrt() c. abs() d. strlen() 25. ______function is the starting point of the program. a. main() b. sqrt() c. abs() d. strlen()
Answers Q.NO Ans Q.NO Ans Q.NO Ans Q.NO Ans Q.NO Ans 1 C 2 A 3 A 4 A 5 D 6 A 7 B 8 A 9 B 10 C 11 B 12 B 13 C 14 A 15 D 16 C 17 B 18 C 19 B 20 A 21 A 22 A 23 A 24 A 25 A
119 | Train the Trainers : Teacher’s Hand b ook
UNIT II - OPERATORS, CONTROL STRUCTURES AND LOOPING
1. ______are defined as a symbol that specifies an operation to be performed on the operands. a. Operators b. Expressions c. Variables d. Data 2. ______is a function which is applied to values to give a result. a. Operators b. Expressions c. Variables d. Data 3. Operators and values are combined to form ______- a. Operators b. Expressions c. Variables d. Data 4. ______operators are used to assign a value or an expression or a value of a variable. a. Assignment b. Relational c. Ternary d. Logical 5. Assignment operators are used to assign a ______a. Value b. Expression c. Value of another variable d. All of the above 6. Simple assignment is denoted by ______a. = = b. = c. += d. -= 7. Odd one out. a. = = b.* = c. += d. -= 8. Which operator is compound assignment operator. a. * = b. += c. -= d. All 9. Which arithmetic operator gives the remainder of the division. a. + b. % c. / d. * 10. ______is called increment operator. a. ++ b. -- c. + d. += 11. ______is called decrement operator. a. ++ b. -- c. + d. += 12. i++ is equivalent to ______. a. i = i+1 b. I = I – 1 c. i=i+2 d. None 13. i-- is equivalent to ______. a. i = i+1 b. i = i – 1 c. i=i+2 d. None 14. i+=10 is equivalent to______. a. i =i+10 b. i=i-10 c=i+1 d.None 15. Find the final value in the expression, int a=8, b=9, c; c = a++ + --b; a. 16 b. 17 c. 18 d. error 120 | Train the Trainers : Teacher’s Hand b ook
16. Relational operator returns the value ______. a. 0 or 1 b. -1 or +1 c. +1 or -1 d. Address 17. Consider, int a = 4; a++; now the value of á. is ______. a. 4 b. 5 c. -4 d. -5 18. conditional operators are also called ______.- operator a. Assignment b. Relational c. Ternary d. Logical 19. Consider, int a=3, b=4, max; max = (a > b) ?a:b; the value of max is ______a. 4 b. 3 c. 0 d. 1 20. ______is a comparison operator. a. == b. = c. + d. * 21. Which operator is not a relational operator? a. == b. = c. <= d. >= 22. ______is OR operator. a. && b. ! c. || d. & 23. Bitwise operators operates on ______only. a. Integer b. Float c. Char d. String 24. Which operator is Logical NOT operator? a. ! b. & c. ^ d. || 25. ______is Shift right operator. a. <= b. >> c. << d. >=
Answers Q.NO Ans Q.NO Ans Q.NO Ans Q.NO Ans Q.NO Ans 1 A 2 A 3 B 4 A 5 D 6 B 7 A 8 D 9 B 10 A 11 B 12 A 13 B 14 A 15 B 16 A 17 B 18 C 19 A 20 A 21 B 22 C 23 A 24 A 25 B
121 | Train the Trainers : Teacher’s Hand b ook
UNIT III - ARRAYS 1. ______is defined as an ordered sequence of finite data items of the same data type. a. Array b. Structure c. pointer d. union 2. Array is a ______data type. a. Derived b. Primitive c. User defined d. int 3. In general, arrays can be classified into ______types. a. 2 b. 3 c. 4 d. many 4. One dimensional array is also known as ______array. a. scalar b. vector c. matrix d. none 5. ______dimensional array can be represented as a list of data items. a. one b. two c. three d. multi 6. ______dimensional array can be represented as table of data items consisting of rows and columns. a. one b. two c. three d. multi 7. Two dimensional array is also known as ______a. scalar b. vector c. matrix d. none 8. The format of declaring one dimensional array is ______a. data_type array_name[size]; b. array_name data_type[size]; c. data_type array_name(size); d. data_type array_name{size}; 9. C uses ______as a way of describing a collection of variables with identical properties. a. Array b. Structure c. pointer d. union 10. Array subscript starts with ______and ends with ______a. 0 to n-1 b. 0 to 100 c. 1 to n-1 d. 1 to 10 11. Array index(subscript) starts from ______a. 0 b. 1 c. both a or b d. none 12. Array subscript cannot be ______a. Integer b. positive c. Negative d. none 13. Array subscript should be a ______integer. a. Integer b. positive c. Negative d. none 14. Consider int a[100]; the members of the array a is accessed from ______. a. 0 to 99 b. 1 to 100 c. 0 to 100 d. 1 to 99 15. Arrays may be ______dimensional or ______dimensional. a. one, two b. one, multi c. one, many d. all
122 | Train the Trainers : Teacher’s Hand b ook
16. Array subscript should enclosed within ______. a. [ ] b. ( ) c. { } d. all 17. ______is a single entity holding a sequence of data items of similar data types. a. Array b. Structure c. pointer d. union 18. ______dimensional array can be used to represent a collection of tables. a. one b. two c. three d. multi 19. An array with more than two dimensions is called ______dimensional array. a. Many b. two c. three d. multi 20. The list of array initializers should be enclosed by ______- a. [ ] b. ( ) c. { } d. all 21. Consider int a[10]; We can store ______elements in the array a. a. 10 b. 9 c. 20 d. 100 22. consider int a[3]={ 10, -2, 100}; Value stored in a[2] = ______a. 10 b. -2 c. 2 d. 100 23. Arrays can be initialized in its ______only. a. declaration b. execution c. Both a & b. d. none 24. Consider int x[ ] = { 1,2,3,4,5,1000}. This makes the array x having ______elements. a. 5 b. 6 c. 1000 d. 100 25. Consider int a[10]; No. of bytes allotted in the array is ______bytes. a. 10 b. 20 c. 40 d. 80
Answers Q.NO Ans Q.NO Ans Q.NO Ans Q.NO Ans Q.NO Ans 1 A 2 A 3 A 4 B 5 A 6 B 7 C 8 A 9 A 10 A 11 A 12 C 13 B 14 A 15 B 16 A 17 A 18 C 19 D 20 A 21 A 22 D 23 A 24 B 25 B
123 | Train the Trainers : Teacher’s Hand b ook
UNIT IV - FUNCTIONS 1. ______accepts parameters and returns a result. a. Function b. Array c. Data d. None 2. C functions accept unlimited number of ______- a. parameters. b. data c. values d. None 3. Execution of the program starts from ______a. Pre-processor directive b. main( ) function c. Global variable d. printf( ) 4. ______statement is important to any function that returns result. a. printf( ) b. scanf ( ) c. return d. void 5. Functions that doesn’t return any value/s will be declared as ______a. printf( ) b. scanf ( ) c. return d. void 6. Function that calls itself is called as ______. a. User defined function b. void function c. Recursive function d. All the above 7. Function parameters are always enclosed within ______. a. [ ] b. ( ) c.{ } d. <> 8. Generally functions are divided into ______types. a. 2 b. 3 c. 4 d. 5 9. ______functions are predefined and supplied along with the compiler. a. User defined b. built in c. void d. none 10. An ______followed by the open parenthesis is recognized as a function by the compiler. a. Identifier b. constants c. tokens d. loops 11. ______declares the function name and its parameters. a. Data type b. output c. prototype d. input 12. Built in functions are also called as ______function. a. User defined b. Library c. void d. None 13. Default return type of a function is ______a. int b. float c. char d. void 14. ______function sends the output into a file. a. puts() b. printf() c. fprintf() d. scanf() 15. Body of the function is always included within ______a. [ ] b. ( ) c. { } d. <> 124 | Train the Trainers : Teacher’s Hand b ook
16. Parameters of a function is otherwise called as ______a. Arguments b. output c. input d. data 17. Every function is identified by ______a. Parameters b. Function name c. input d. void 18. The function defined by the user is called ______function. a. User defined b. Library c. void d. Built in 19. A function which invokes other function is known as ______function. a. Calling b. Called c. Builtin d. recursive 20. A function which is invoked by other function is known as ______function. a. Calling b. Called c. Builtin d. recursive 21. A function does not have any parameter is called as a function ______a. without parameter b. with parameter c. empty parameter d. none 22. A function ______describes what a function does. a. definition b. declaration c. initialization d. none 23. A function should be ______whenever and wherever it is invoked. a. defined b. declared c. initialized d. none 24. In function declaration, the return type is optional for returning ______value. a. int b. float c. char d. string 25. ______functions executes slowly. a. Calling b. Called c. Built in d. Recursive
Answers Q.NO Ans Q.NO Ans Q.NO Ans Q.NO Ans Q.NO Ans 1 A 2 A 3 B 4 C 5 D 6 C 7 B 8 A 9 B 10 A 11 C 12 B 13 A 14 C 15 C 16 A 17 B 18 A 19 A 20 B 21 A 22 A 23 B 24 A 25 D
125 | Train the Trainers : Teacher’s Hand b ook
LESSON V - POINTERS 1. ______is a variable that points to a memory location. a. array b. structure c. pointer d. data 2. Each memory cell is given an identification number called ______. a. location b. address c. memory d. none 3. The variable that hold memory addresses are called ______a. array b. structure c. pointer d. data 4. Choose the correct statement related to pointer. a. Increase the execution speed of the program b. Reduce the length and complexity of a program c. Easy to understand a program d. Both a & b. 5. ______operator is used to access the address of any variable. a. * b. & c. ^ d. @ 6. ______operator is called address operator. a. * b. & c. ^ d. @ 7. consider int a, *b=&a; then p has ______a. the value of a b. the address of a b. null value d. both a & b 8. Pointers will return the address as ______value. a. Binary b. Hexadecima l c. Octal d. None 9. Choose the pointer variable______. a. int&a; b. int a; c. int *a; d. int a*; 10. Each memory cell in the computer has an ______that can be used to access that location. a. location b. address c. memory d. none 11. ______increases the executions of the program. a. array b. structure c. pointer d. data 12. ______reduce the length and complexity of a program. a. array b. structure c. pointer d. data 13. ______enable us to access a variable that is defined outside the function. a. array b. structure c. pointer d. data 14. ______are used to pass information back and forth between a function and its reference point. a. array b. structure c. pointer d. data 15. ______supports dynamic memory allocation. a. array b. structure c. pointer d. data 126 | Train the Trainers : Teacher’s Hand b ook
16. ______can improve the efficiency of certain routines. a. array b. structure c. pointer d. data 17. ______provide support for dynamic data structure such as binary trees and linked lists. a. array b. structure c. pointer d. data 18. Which of the following is the reason to use pointer in a program. a. It supports dynamic memory allocation. b. It can improve the efficiency of certain routines c. It provides support for dynamic data structure such as binary trees and linked lists. d. All the above. 19. A ______is a variable that contains the memory location of another variable. a. array b. structure c. pointer d. data 20. The ______symbol tells the compiler that you are creating a pointer variable. a. * b. & c. ^ d. @ 21. A pointer contains ______value until it is initialized. a. Hexadecimal b. Garbage c. Octal d. None 22. int *a; declares the variable a as a pointer variable that points to a ______variable. a. integer b. float c. char d. double 23. The value of the variable can be accessed using ______variable. a. array b. structure c. pointer d. data 24. ______is called as indirection operator. a. * b. & c. ^ d. @ 25. In pointers, * is called as ______operator. a. direction b. indirection c. address d. arithmetic
Answers Q.NO Ans Q.NO Ans Q.NO Ans Q.NO Ans Q.NO Ans 1 C 2 B 3 C 4 D 5 B 6 B 7 B 8 B 9 C 10 B 11 C 12 C 13 C 14 C 15 C 16 C 17 C 18 D 19 C 20 B 21 B 22 A 23 C 24 B 25 B
127 | Train the Trainers : Teacher’s Hand b ook
Annexure V e – Question Bank – Certificate in C++ Programming
IECD Institute for Entrepreneurship and Career Development Bharathidasan University,Tiruchirappalli – 620 023 Certificate in C++ Programming
Course Code –CPP
UNIT I - INTRODUCTION TO C++ 1. ______was developed as an alternative to FORTRAN. a) ALGOL 60 b) CPL c) BCPL d) C 2. Expansion of BCPL______. a)Basic Combined Programming Language b) Basic Collective Programming Language c) Basic Concept Programming Language d) Basic Corrected Programming Language 3. Who developed the BCPL? a) Martin Richards b)Dennis Ritchie c)Ken Thompson d) Bjarne Stroutrup 4. ______immersed in the development of UNIX at Bell Labs a) Martin Richards b)Dennis Ritchie c)Ken Thompson d) Bjarne Stroutrup 5. Who developed the basis of C? a) Martin Richards b)Dennis Ritchie c)Ken Thompson d) Bjarne Stroutrup 6. Who developed the C++ Language? a) Martin Richards b)Dennis Ritchie c)Ken Thompson d) Bjarne Stroutrup 7. C++ developed in the year of ______. a) 1973 b)1980 c) 1983 d)1985 8. In which year on ANSI Committee began the development of a specific standard for C++ ______. a) 1990 b)1980 c) 1983 d)1985 9. ______is the process to convert one data type to another data type. a)Inheritance b)Enum c)Type Casting d)Encapsulation 10.______is converted into executable machine code by utility program a) Assembler b)Loader c)Linker d)both a & b 11.______uses a mnemonic to represent each low level machine operation a) Assembly Language b) Low Level Language c)High Level Language d) Machine Level Language
128 | Train the Trainers : Teacher’s Hand b ook
12. It allows a greater reusability of code in a more logical and productive way ______. a) Object Oriented Programming b) Machine Level Programming c) Low Level Programming d) High Level Programming Language 13. ______is backwards compatible with C language. a) C b)C++ c) Java g)BCPL 14. ______defines the abstract characteristics of a thing. a) class b) Object C) method d) Abstraction 15.An ______is the instance of class. a) Class b) Object C) Method d) Abstraction 16.______means that the way the programmer showing only the essential features of a class without including the background details a) Class b) Object C) Method d) Abstraction 17.The process of combining the data member and member function______. a) Class b) Object C)Encapsulation d) Abstraction 18.The Process by which an object sends data to another object is called as______. a) Encapsulation b) Abstraction c) Message Passing d)Inheritance 19. The Process of creating a new classes bsed on the existing Class is called as --- a) Encapsulation b) Abstraction c) Message Passing d)Inheritance 20. ______can reuse the data and member function which is defined already in an existing class a) Class Programmer b)Class Member c) Member Class d) data member 21. How many types of Inheritance? a) 5 b) 6 c)7 d)8 22.The ability in expressing a thing in different and multiple ways______a) Encapsulation b) Abstraction c) Message Passing d)Polymorphism 23. How many types of Polymorphism? a) 5 b) 6 c)2 d)8 24. ______is a type of Run Time polymorphism a) Virtual function b) Member Function c) Friend Function d) Multiple Function 25. The same operator is used for multiple different purpose is known as ______. a)Operator Overloading b) Function Overloading c) Virtual Function d) Add Function
129 | Train the Trainers : Teacher’s Hand b ook
Answers Q.NO Ans Q.NO Ans Q.NO Ans Q.NO Ans Q.NO Ans 1 A 2 A 3 A 4 C 5 B 6 D 7 B 8 A 9 C 10 A 11 A 12 A 13 B 14 A 15 B 16 D 17 C 18 C 19 D 20 A 21 B 22 D 23 C 24 A 25 A
130 | Train the Trainers : Teacher’s Hand b ook
UNIT – II - OPERATORS 1. ______defines the precedence order in which operator are evaluated. a) Order b)Grouping c) Priority d) None of the above 2. ______operator assigns a value to a variable. a) Assign b) Equal to( = ) c) Assignment d) b) or c) 3. The lvalue in an arithmetic expression must be a ______. a) Variable b) Constant c) Operator d) Symbol 4. The rvalue in an arithmetic expression must be a ______. a) Variable b) Constant c) Operator d) Symbol 5. The assignment operation takes place from ______. a) Left to right b) Right to left` c) a) and b) d) None of the above 6. What will be the value of ‘a’ and ‘b’ after the execution of A = 10; B= 5; A=b; B=20; a) 10,5 b) 5,10 c) 5,20 d) 10,20 7. ______is the modulo operator . a) / b) % c) \ d) # 8. ______is a compound assaignment operator . a) = b) = = c) += d) = + 9. Unary operators perform operation over ______variable(s). a) Two b) Single c) Any d) None of the above 10. Values of current variables can be modified by changing their values using the ______operators. a) Assignment b) Arithmetic c) Compound assignment d) Modulo 11. What will be the value of ‘a’ in the following snippet? int a , b =3; A=b; A+=2; cout < 131 | Train the Trainers : Teacher’s Hand b ook 14. Find the value of ‘b’ and ‘c’ in the following snippet A=3; B= ++a; C=a++; a) 3,4 b) 4,5 c) 3,3 d) 4,4 15. ______operator returns a Boolean value. a) Arithmetic b) Relational c) Logical d) Conditional 16. Relational and equality operators are used to ______two values. a) Evaluate b) Relate c) Compare d) Assign 17. The result of 3! = 2 will be ______. a) 3 b) 2 c) True d) False 18. ______is the logical AND operator a) & b) && c) ; d) ;; 19. Not operator (!) has ______operand(s) a) Zero b) One c) Two d) Many 20. ! true evaluates to ______( True or False ) a) True b) False c) Else d) None 21. ______is the conditional operator. a) ? b) : c) ?: d) && 22. ______operator is also called as Ternary operator a) Arithmetic b) Relational c) Logical d) Conditional 23. ______operator is used to separate two or more expressions. a) - b) / c) , d) : 24. The value of a and b in the statement A=(b=3,b+2); will be a) 3,2 b) 3,5 c) 5,3 d) 2,3 25. ______operator combines two or more expressions. a) Arithmetic b) Relational c) Logical d) Conditional 132 | Train the Trainers : Teacher’s Hand b ook Answers Q.NO Ans Q.NO Ans Q.NO Ans Q.NO Ans Q.NO Ans 1 B 2 D 3 A 4 B 5 B 6 C 7 B 8 C 9 B 10 C 11 C 12 A 13 A 14 D 15 B 16 C 17 C 18 B 19 B 20 B 21 C 22 D 23 C 24 C 25 C 133 | Train the Trainers : Teacher’s Hand b ook UNIT- III - CONTROL STRUCTURES LOOPING & ARRAY 1. ______are used for controlling the flow of execution by checking the conditions. a) Statements b) Instructions c) Control structures d) Arrays 2. Control structures are of ______major types. a) 2 b) 3 c) 4 d) 5 3. Expressions are used to represent condition checking by using a ______. a) Arithmetic b) Relational c) Logical d) b) or c) 4. ______keyword is used to execute a statement or a block only if a condition is fulfilled. a) for b) while c) do while d) of 5. A statement block can be specified using ______. a) { } b) ( ) c) [ ] d) / * / 6. ______statement is used to choose between two alternatives. a) of b) if – else c) while d) do while. 7. ______statement checks several possible constant values for an expression. a) switch b) while c) for d) do- while. 8. ______is the keyword to exit from switch statement a) Switch b) case c) default d) break 9. ______is optional in the switch structure. a) switch b) case c) default d) break 10. ______are used to repeat a statement a certain number of times. a) Loops b) Control statements c) Decisions d) Expressions. 11. There are ______types of loop control statements. a) 2 b) 3 c) 4 d) 5 12. ______is an entry controlled loop. a) for b) while c) do-while d) a) and b) 13. ______is an exit controlled loop. a) for b) while c ) do while d) switch 14. ______statement specifies initialization, increment of decrement and condition a) for b) while c ) do while d) switch 15. The ______part in for statement is executed only once. a) Initialization b) Increment c) Condition d) All the above 134 | Train the Trainers : Teacher’s Hand b ook 16. The ______fields are optional in the for statement. a) Initialization b) Increment/decrement c) Condition d) a) and b) 17. The sections in the for statement are separated by ______a) Comma b) Braces c) Colon d) Semicolon ]18. ______operator is an expression separator a) Comma b) Braces c) Colon d) Semicolon 19. ______statement is executed at least once even if the condition is never fulfilled. a) of b) for c) while d) do-while 20. ______statement is used to end an infinite loop. a) Break b) Default c) Continue d) None 21. ______statement causes the program to ship the rest of the loop. a) Break b) Default c) Continue d) None 22. ______statement jumps to the start of the following iteration. a) Break b) Default c) Continue d) None 23. ______statement jumps to another point in the program. a) Goto b) Break c) Continue d) Switch 24. A label is made of an identifier followed by a ______a) Semi colon b) Comma c) Colon d) Symbol 25. ______function is defined in the cstdlib library a) Main b) Exit c) Go to d) All the above Answers Q.NO Ans Q.NO Ans Q.NO Ans Q.NO Ans Q.NO Ans 1 C 2 A 3 D 4 D 5 A 6 B 7 A 8 D 9 C 10 A 11 A 12 D 13 C 14 A 15 A 16 D 17 D 18 A 19 D 20 A 21 B 22 B 23 A 24 C 25 B 135 | Train the Trainers : Teacher’s Hand b ook UNIT - IV -FUNCTIONS ,CLASSES & OBJECTS 1. A ______is a group of statements that is executed when it is called from some point of the program a) Pointer b) Function c) Array d)Structure 2.______is the data type specifier of the data returned by the function . a)Type b)Parameters c)Statements d) Function 3.Each ______consists of a data type specified followed by an identifier. a)Type b)Parameters c)Statements d) Function 4.______is the function’s body . a)Type b)Parameters c)Statements d) Function 5. The function statements that are in normal definitions are enclosed in ______braces . a) <> b)() c)[] d) {} 6. End the prototype declaration with a mandatory ______. a) ; b)() c)[] d) {} 7. Syntax of a function declaration ? a) Type name ( argument1, argument2..)statement a) Type cast ( argument1, argument2..)statement a) Type definition ( argument1, argument2..)statement a) Type case ( argument1, argument2..)statement 8. ______can also be used in the function’s parameter list. a) Function b) Parameter c) Void d)Main 9.______indicate that this is a call to a function and not the name of a variable or some other C++ statement. a)Parameter b)Parenthesis c) Array d)Pointer 10. The argument passed to the function have been ______. a) Pass by method b) Pass by reference c)Pass by value d) Pass by pointer 11.The declaration of duplicate data type of each parameter was followed by an ______. a) <> b)() c)[] d) & 12. Ampersand specifies that their corresponding arguments are to be ______instead of by value. a) Pass by method b) Pass by reference c)Pass by value d)Pass by pointer 13.______is the property that function have to be called by themselves. a) Recursivity b) Function c)Pointer d) Array 14. 5! is ______. a)120 b)140 c)160 D)180 136 | Train the Trainers : Teacher’s Hand b ook 15. ______indicates the compiler that inline substitution is preferred to the usual function . a) Inline specifier B|) Array c)Pointer d) Function 16. ______starts with the keyword inlines. a) Inline b Array c)Pointer d) Function 17. ______will use as macro function. a) Array b)Pointer c) Function a)Inline 18. ______has no return value. a) Array b)Pointer c) Function a)Inline 19. Inline statement should not be used with ______statement. a)Break b) Continue c)Go to d) While 20. Ife the same function is used for multiple purpose then it will be called as______. a) Operator overloading b) Function overloading c)An Array d) friend function 21. ______is used for performing more than one task using the same function or operator. a) Overloading b) Function overloading c)An Array d) friend function 22. How many types of overloading? a)1 b)2 c)3 D) 4 23.______Operator is used to work with 2 operands , therefore with the user defined as an argument. a)Unary b)Ternary c) Binary d) bitwise 24.______is a collection of similar objects. a) Object b) Function C) Data d) Class 25. ______is a real world entity. a)Data and object b) Data & class c)Data and member d) Data and function Answers Q.NO Ans Q.NO Ans Q.NO Ans Q.NO Ans Q.NO Ans 1 B 2 A 3 B 4 C 5 D 6 A 7 A 8 C 9 B 10 C 11 D 12 B 13 A 14 A 15 A 16 A 17 D 18 D 19 C 20 A 21 A 22 B 23 C 24 D 25 C 137 | Train the Trainers : Teacher’s Hand b ook UNIT –V - INHERITANCE AND POLYMORPHISM 1.______is a special function which is used to initialize the data member of the class, the objects was created. a)Destructor b) Constructor c) Inline d) Member Function 2. ______of the constructor is the name of the class a) Name b) Void c) Class d) Object 3. ______Constructor is specified normally in the program . a) Simple b) Parameterized c) Constructor with default values d) Multiple 4. ______constructors are constructors with argument . a) Simple b) Parameterized c) Constructor with default values d) Multiple 5. ______constructor contains argument with default values. a) Simple b) Parameterized c) Constructor with default values d) Multiple 6. ______constructor is named with presence of more than one constructor with the same name . a) Simple b) Parameterized c) Constructor with default values d) Multiple 7.______is a special function which is used to remove the objects which was created by using the constructor function . a)Destructor b) Constructor c) Inline d) Member Function 8.Destructor will be preceded by the symbol______. a)= b)^ c)~ d)- 9. Multiple constructor exists with the different number of argument , then it is said to be ______. a) Simple b) Polymorphic c) Constructor with default values d) Multiple 10.______is the property of C++ that object of one class acquires the properties of objects. a) Polymorphism b)Inheritance c) Encapsulation d) Member Function 11. Base class is also known as ______. a) Sub Class b)Main Class c) Super Class d) Class 12. Derived Class is also known as______. a) Sub Class b)Main Class c) Super Class d) Class 13. How many types of inheritance modes available in C++? a)1 b)2 c)3 D) 4 14. How many types of inheritance? a)1 b)2 c)3 D) 5 138 | Train the Trainers : Teacher’s Hand b ook 15. ______inheritance contains one Base class and One Derived Class. a) Single inheritance b) Multiple inheritance c) Multilevel inheritance d) Hierarchical inheritance 16 . ______inheritance contains one Base class and Multiple Derived Class. a) Single inheritance b) Multiple inheritance c) Multilevel inheritance d) Hierarchical inheritance 17. ______inheritance contains Multiple Base class and One Derived Class. a) Single inheritance b) Multiple inheritance c) Multilevel inheritance d) Hierarchical inheritance 18. ______inheritance contains more than one Base class and more than One Derived Class. a) Single inheritance b) Multiple inheritance c) Multilevel inheritance d) Hierarchical inheritance 19. ______inheritance contains Base class and Derived Classes are constructing a tree like structures. a) Single inheritance b) Multiple inheritance c) Multilevel inheritance d) Hierarchical inheritance 20. ______inheritance is the constructed structure of the combination of both multiple and multilevel Inheritance. a)Hybrid Inheritance b) Multiple inheritance c) Multilevel inheritance d) Hierarchical inheritance 21. ______inheritance contains the base and derived classes are constructed to form multiple paths among them. a) Single inheritance b) Multiple inheritance c) Multilevel inheritance d) Multi Path Inheritance 22.______is designed to be specially used as a base class. a) Abstract b) Base c) Derived d)Multiple 23.______are used to operate with the object of the same class or different classes. a) Friend Function b) Member C) Class d) Abstract 24. A Friend function starts with the keyword ______. a)friendclass b) friend c) friend object d)main 25. Abstract class is used as a ______. a) Base class only b) Derived class c) Both derived & base class d) None of these Answers Q.NO Ans Q.NO Ans Q.NO Ans Q.NO Ans Q.NO Ans 1 B 2 A 3 A 4 B 5 A 6 C 7 A 8 C 9 B 10 B 11 C 12 A 13 C 14 D 15 A 16 A 17 B 18 C 19 D 20 A 21 D 22 A 23 A 24 B 25 C 139 | Train the Trainers : Teacher’s Hand b ook Annexure V f – Question Bank – Certificate in Graphics Design IECD Institute for Entrepreneurship and Career Development Bharathidasan University,Tiruchirappalli – 620 023 Certificate in Graphics Design Course Code –CGD UNIT – I - IN DESIGN 1. ______is desktop publishing and design software. a) Indesign b) CorelDraw c) Photoshop d) All of these 2. In design software is used to create materials such as posters, flyers, brochures, magazines, newspapers, books and other forms of documentation. a) Coreldraw b) Photoshop c) Indesign d) None of these 3. ______is a powerful design program. a) Indesign b) CorelDraw c) Photoshop d) All of these 4. In step1, Open In design and you will be presented with an ______screen. a) Information b) instruction c) introduction d) Intimation 5. To change rulers and points values go to ______ PreferenceUnits and increments. a) Indesign b) Edit c) Layout d) Type 6. Under ______units, change the horizontal and vertical values to desired unit of measurement. a)Toolbar b) Toolbox c) Image d) Layout 7. The origin of the ruler can be ______. a) Spread b) Page c) Spine d) All of these 8. By selecting spread, the ruler will start from the ______of the document and span across the spread of the document. a) Right b) Left c) Center d) None of these 9. By selecting page, the ruler will start at the left hand side and stop when it gets to the end of the page and it will start at ______again. a) One b) Two c) Zero d) Hero 10. By selecting spine, the ruler will start its zero point from the spine and work to the ______of the document. a) Edge b) End c) Top d) Bottom 11. In introduction screen, to create a new document click on the ______and select create new document. a) Right b) Left c) Center d) None of these 140 | Train the Trainers : Teacher’s Hand b ook 12. There are ______steps to create and viewing documents. a) 2 b) 6 c) 5 d) 4 13. If you need to adjust the margins or columns go to ______ Margins and Columns. a) Toolbar b) Toolbox c) Image d) Ruler 14. Create and manipulate documents and files using elements, such as ______. a) Panels b) Bars c) Windows d) All of these 15. Any arrangement of panels, bars and windows elements is called ______. a) Work book b)Workspace c)Work done d) Work design 16. The ______of the different applications in Adobe® Creative Cloud® share the same appearance so that you can move between the applications easily. a) Work book b) Workspace c) Work done d) Work design 17. The ______bar across the top contains a workspace switcher, menus and other application controls. a) Tool b) Application c) Vertical d) Control 18. There are ______types of page orientation. a) 5 b)1 c) 3 c) 2 19. The default page orientation is ______. a) Landscape b) Portrait c) Page d) Preview 20. The ______contains tools for creating and editing images, artwork, and page elements. a) Tools panel b) Control panel c) Tools panel d) All of these 21. The ______displays options for currently selected tool. a) Tools panel b) Control panel c) Tools panel d) All of these 22. In ______, the control panel displays options for currently selected objects. a) Adobe Photoshop b)Adobe Flash c) Abode reader d) Illustrator 23. In Adobe Photoshop, the control panel is known as the ______. a) Option bar b) Property c) Layers d) Tool bar 24. In Adobe Flash®, Adobe Dream Weavers® and Adobe Fireworks®, the control panel is known as ______. a) Prospectus b) Property inspector c) Proportion d) Application 25. The ______displays the file you are working on. a) Document window b) Dos window c) Darkling window d) Dark window 141 | Train the Trainers : Teacher’s Hand b ook Answers Q.NO Ans Q.NO Ans Q.NO Ans Q.NO Ans Q.NO Ans 1 A 2 C 3 A 4 C 5 A 6 D 7 D 8 B 9 C 10 A 11 A 12 D 13 D 14 C 15 B 16 B 17 B 18 C 19 B 20 A 21 B 22 D 23 A 24 B 25 A 142 | Train the Trainers : Teacher’s Hand b ook UNIT – II - IN DESIGN PAGES 1. We can quickly add a new blank page to a document using the ______panel. a) Pages b) Panel c) Master page d) New page 2. Insert Pages command present in ______menu. a) Window b) File c) Options d) None of the above 3. Click the pages option from the ______menu. a) Window b) File c) Options d) None of the above 4. To insert page, Click the ______New Page button on the panel. a) Delete b) View c) Create d) None of the above 5. To use the Duplicate option, click spread command on the ______menu. a) Window b) File c) Options d) None of the above 6. Click the Insert list arrow and then specify ______Page to Insert new pages after a specific page. a) Window b) After c) Options d) None of the above 7. ______Page is used to Insert new pages before a specific page. a) Before b) After c) Options d) None of the above 8. At start of Document option, Inserts new pages at the ______of the document. a) End b) Stop c) Start d) After 9. At End of Document option, Inserts new pages at the ______of the document. a) End b) Stop c) Start d) After 10. Click the master list arrow, and then select a ______page to use as the basis for the new page. a) Master b) Non master c) a or b d) None of the above 11. Frames are containers that hold text, but they can also hold graphics or may even be used to hold nothing but a color, such as a shape in a design or a ______color. a) Back color b) Black color c) Background color d) All of these 12. Which option is used to open an existing file? a) File b) Open c) New d) Save 13. To save the document, choose ______ Save As. a) File b) Open c) New d) Save 14. In the Tools panel, click to ______and used to create a new text frame. a) Type tool b) Text tool c) Frame tool d) Graphic tool 15. ______stands for In design document. a) Indd b) Idd c) iddo d) None of the above 143 | Train the Trainers : Teacher’s Hand b ook 16. In design software files are stored in the extension ______. a) .docx b) .indd c) .ind d) .doc 17. In the panel docking area along the ______side of the workspace, click the Paragraph Styles button to open the Paragraph Styles panel. a) Left b) Right c) Center d) None of the these 18. In order to apply a completely clean paragraph style to a block of text, press the ______key and click on a style of your choice. a) Shift b) Ctrl c) Alt d) None of these 19. Example of word processing software is Microsoft Word, and saves as a plain ______file. a) .txt b) .doc c) .docx d) .htm 20. If we want to insert images, choose File ______. a) Insert b) Place c) New d) Tools 21. What is the shortcut key for Select all? a) ctrl+A b) ctrl + s c) ctrl+p d) ctrl+w 22. Deselect all option is present in the ______menu. a) Edit b) View c) File d) Window 23. Choose the Selection Tool in the ______panel. a) Control b) Tools c) Text d) Styles 24. Using the selection tool click once on the ______plus sign in the lower – right corner of the text frame. a) Green b) Blue c) Red d) Yellow 25. By default, ______begin measuring from the upper – left corner of a page or spread. a) Margins b) Scale c) Rulers d) None of these Answers Q.NO Ans Q.NO Ans Q.NO Ans Q.NO Ans Q.NO Ans 1 A 2 C 3 A 4 C 5 C 6 B 7 A 8 C 9 A 10 C 11 C 12 A 13 A 14 A 15 A 16 B 17 B 18 C 19 A 20 B 21 A 22 A 23 B 24 C 25 C 144 | Train the Trainers : Teacher’s Hand b ook UNIT – III - PHOTOSHOP 1. Adobe Photoshop is a graphics editing program developed and published by ______. a) Adobe b) Microsoft c) Dell d) Apple 2. ______is a pixel – based image editor. a) Photoshop b) Paint c) Piccolo d) Pica 3. The powerful tools used to enhance and edit these pictures are capable for use in the digital world including the infinite possibilities of the ______. a) Internet b) Intercom c) Intermission d) None of these 4. ______is used to select pixels. a) Selection tool b) Brush tool c) Type tool d) Magic want tool 5. ______is used to paint on pixels with the foreground color. a) Selection tool b) Brush tool c) Type tool d) Magic want tool 6. ______tool is used to typeset text and so on. a) Selection tool b) Brush tool c) Type tool d) Text 7. Tool keyboard shortcuts are shown to the ______of the tool name. a) Right b) Left c) Top d) Bottom 8. ______format is probably the most important. a) PSD b) PNG c) TIFF d) GIF 9. ______is the leading digital image editing application for the internet, print and other new media disciplines. a) Photoshop b) Paint c) Piccolo d) pica 10. PSD stands for ______. a) Photoshop Digital b) Photoshop Dual c) Photoshop Document d) Picassos Document 11. ______is the Photoshop’s native file format. a) PSD b) PNG c) TIFF d) GIF 12. ______is one of the few file types that fully support all of the powerful features that Photoshop gives us like layers, layers masks, adjustment layers, channels, paths and so on. a) PSD b) PNG c) TIFF d) GIF 13. Photoshop files sometimes have the file extension ______. a) PSD b) PSB c) TIFF d) GIF 14. PSB stands for ______. a) Photoshop big b) Photoshot bag c) Photoshop bitmap d) None of the above 145 | Train the Trainers : Teacher’s Hand b ook 15. A PSB file extends the PSD file format, increasing the maximum height and width to 300,000 pixels and the length limit to around ______Exabyte’s. a) 5 b) 4 c) 7 d) 9 16. JPEG stands for ______. a) Joint Photographical export Group b) Joint Photo expert Graph c) Joint Photographic Expert Group d) None of these 17. JPEG supports ______bit color. a) 35 b) 24 c) 32 d) 16 18. JPEG can reproduce roughly ______million colors. a) 14.7 b) 16.7 c) 15.7 d) 17.4 19. The digital cameras can capture images as ______files. a) GIF b) EPS c) JPEG d) PNG 20. Most high end digital SLR cameras give you the option of capturing images in either the ______format. a) JPEG b) RAW c) a and b d) a or b 21. GIF stands for ______. a) Graphical Interchange Format b)Graphics Interleave Format c) Graphs Interchange Format d) All of these 22. GIF files can display up to ______colors. a) 1026 b) 256 c) 254 d) 264 23. SLR stands for ______. a) Single Lens reflex b) Simple lens reflex c) Set lens repeat d) Single lex reflect 24. GIF format has been around even longer than ______, and it’s the format of choice for web graphics. a) GIF b) EPS c) JPEG d) PNG 25. PNG stands for ______. a) Photoshop Net Graphics b) Portable Network Graphics c) Photo Nut Graphics d) Picosmos Network Graphics Answers Q.NO Ans Q.NO Ans Q.NO Ans Q.NO Ans Q.NO Ans 1 A 2 A 3 A 4 A 5 B 6 C 7 A 8 A 9 A 10 C 11 A 12 A 13 B 14 A 15 B 16 C 17 B 18 B 19 C 20 C 21 C 22 B 23 A 24 C 25 B 146 | Train the Trainers : Teacher’s Hand b ook UNIT – IV - COREL DRAW 1. ______is the extensive text – handling & precision drawing features. a) Photoshop b) In design c) CorelDraw d) None of the above 2. ______is the ideal tool for virtually design project from logos & product packaging to technical illustration and advertisements. a) Photoshop b) In design c) CorelDraw d) None of the above 3. ______is a vector graphics editor. a) Photoshop b) In design c) CorelDraw d) None of the above 4. Corel Draw is marked and developed by ______Corporation of Ottawa, Canada. a) Lotus b) Quattro c) Microsoft d) Corel 5. ______is a bitmap image editor. a) Corel CAPTUR b) Corel PHOTO-PAINT c) CorelDraw RAVE d) Corel Draw 6. ______editor is a computer program that allows to compose and edit vector graphics images interactively on a computer. a) Vector graphics b) Text c) Image d) None of the above 7. Which of the following the formats are popular vector graphics format? a) EPS b) PDF c) SVG d) All of these 8. Which of the following the formats are not popular vector graphics format? a) EPS b) PDF c) SVG d) HTML 9. WMF stand for ______. a) Window Media Format b) Window Morph Format c) Window Mass File d) Window Multiple Files 10. SVG stands for ______. a) Scalable Vector Graphics b) Scale vertical graphics c) Scroll Vertical Graphics d) Scale Vector Graphs 11. VML stands for ______. a) Vector Markup Language b) Video Markup Language c) Vector Mark List d) Video Morph list 12. Lock object is present in which menu? a) File b) View c) Window d) Arrange 13. Guidelines option is present in which menu? a) File b) View c) Window d) Arrange 14. Unlock object is present in which menu? a) File b) View c) Window d) Arrange 147 | Train the Trainers : Teacher’s Hand b ook 15. Default guidelines color is ______. a) Red b) Green c) Black d) Orange 16. Double click on the horizontal guideline using _____ tool? a) Pick b) Select c) Type d) Eraser 17. ______Options is one of the most important options you are going to use when drawing in Corel draw. a) Weld b) Trim c) Intersect d) Shaping 18. ______Option allows you to combine objects together. a) Weld b) Trim c) Intersect d) Shaping 19. Which option is used to draw a complicated shape which consists of simpler shapes combined together? a) Weld b) Trim c) Intersect d) Shaping 20. Which option is used to trim the object? a) Weld b) Trim c) Intersect d) Shaping 21. PDF stands for ______. a) Portable Document Format b) Port document file c) Post Document format d) Print Document file 22. We can import a ______file. a) PDF b) JPEG c) AI d) All of these 23. We can import a file and place it in the active application window as an ______. a) Object b) Import file c) Image d) None of these 24. The imported file becomes part of the ______file. a) Active b) Old c) New d) Existing 25. While importing a bitmap, you can resample it to reduce the file size, or crop it to eliminate unused areas of the ______. a) Photo b) Images c) Object d) None of these Answers Q.NO Ans Q.NO Ans Q.NO Ans Q.NO Ans Q.NO Ans 1 C 2 C 3 C 4 D 5 D 6 A 7 D 8 D 9 A 10 A 11 A 12 D 13 B 14 D 15 B 16 A 17 D 18 A 19 A 20 B 21 A 22 D 23 A 24 A 25 A 148 | Train the Trainers : Teacher’s Hand b ook UNIT – V - COREL DRAW EFFECTS 1. ______are great for organizing objects in your graphics. a) Layers b) Panels c) Designers d) All of these 2. By using layers, you can reduce your work time; make it easier to handle the job at hand and ______the accuracy level of your designs. a) Decrease b) Increase c) Insert d) Inter 3. The ______docker lets you add, move and delete layers in a document. a) Color style b) text style c) Font style d) Object manager 4. Object manager is present in which menu? a) Edit b) File c) View d) Tools 5. You can set up layers before you ______working on your document. a) Top b) Bottom c) Begin d) End 6. You can customize the look of your pages by specifying different______layouts such as booklets, tent card or brochure. a) Page b) Pager c) Packet d) Style 7. You can toggle the page orientation between ______and you can create a custom page size. a) Landscape b) Portrait c) a and b d) None of these 8. Page setup option is present in which menu? a) Edit b) File c) Layout d) Tools 9. You can select from a long list of common paper sizes including legal, business card and various ______sizes. a) Envelope b) Small c) Big d) Legal 10. Page background option is present in which menu? a) Edit b) Layout c) View d) Tools 11. What is the shortcut key for convert to curves? a) ctrl+o b) ctrl+q c) shift+q d) shift+o 12. What is the shortcut key for group all? a) ctrl+G b) ctrl+c c) ctrl+q d) ctrl+o 13. Paragraph text frames automatically adjust to fit text. Click Tools ______. a) Options b) Break c) Arrange d) Alignment 14. Import a ______into a drawing either directly or by linking it to an external file. a) External b) Internal c) Insert d) Input 149 | Train the Trainers : Teacher’s Hand b ook 15. The ______bar provides information about the bitmap including color mode, size and resolution after it has been placed on the page. a) Standard b) Task c) Status d) Tool 16. ______is graphics design software used specially for printing media as well as other designing purpose. a) In Design b) Corel Draw c) Photoshop d) None of these 17. We can give ______to text in Corel Draw same as done in Photoshop. a) Engrave effect b) Emboss effect c) Empress effect d) Enact effect 18. The effect given in CorelDraw is sharper and attractive compared to ______. a) In Design b) Corel Draw c) Photoshop d) None of these 19. Photoshop emboss effect is a ______image. a) Roast b) Raster c) Rest d) Rust 20. Raster image is not very sharp, while the text using ______emboss effect is much sharper. a) In Design b) Corel Draw c) Photoshop d) None of these 21. Go to Effects tab in menu bar and select ______option. a) Bevel b) Brave c) Reveal d) None of these 22. Select ______option for style property. a) Soft edge b) Surfer edge c) Smudge edge d) All of these 23. Effects tab includes the propertied like ______etc. a) Style of the effect and bevel offset b) Shadow color, light controls c) Both a and b d) Either a or b 24. The effect of emboss depends upon the ______controls. a) Tools b) Text c) Light d) Type 25. Light controls include______. a) Intensity b) Direction c) Altitude d) All of these Answers Q.NO Ans Q.NO Ans Q.NO Ans Q.NO Ans Q.NO Ans 1 A 2 B 3 D 4 D 5 C 6 A 7 C 8 C 9 A 10 B 11 B 12 A 13 A 14 A 15 C 16 B 17 B 18 C 19 B 20 B 21 A 22 A 23 C 24 C 25 D 150 | Train the Trainers : Teacher’s Hand b ook Annexure V G – Question Bank – Certificate in Web Design IECD Institute for Entrepreneurship and Career Development Bharathidasan University,Tiruchirappalli – 620 023 Certificate in Web Design Course Code –CWD UNIT – I – INTERNET CONCEPTS 1. The popular name for the Internet is the information ______. a) Super highway b) Highway c) Both a & b d) None of these 2. The origins of the Internet reach back to research commissioned by the United States Government in the a) 1988 b) 1967 c) 1960 d) 1976 3. The funding of a new U.S backbone by the National Foundation in the year ______. a) 1980 b) 1960 c) 1990 d) 1989 4. ______is a software program that allows a person to explore the Internet in an easy to use way. a) Browser b) LAN c) WWW d) WAN 5. Examples of browser are ______. a) Chrome b) Firefox c) Opera d) All of these 6. The Internet is approximately 100 times more people than were using it in ______. a) 1960 b) 1995 c) 2000 d) 2002 7. The commercialization of what was by the ______an international network resulted in its popularization and incorporation into virtually every aspect of modern human life. a) 1990 b) 2001 c) 1996 d)2002 8. Expansion of ISP is ______. a) Internet Service Provider b) Introduced Service Provider c) Inter Service Provider d) None 9. ______broadband ensures connection speeds that come close to the wired broadband speeds provided by DSL and cable ISPs. a) Wired b) Wireless c) Internet d) None of these 10. Most Internet Societies due to the slow connection speed it ensures about ______Kbit / s. a) 70-80 b) 40-50 c) 10-20 d) 30-40 11. DSL stands for ______. a) Digital Subscriber loop b) Digital subscribers line c) All the above d) None of the above 12. ADSL stands for ______. a) Asymmetric Digital subscriber line b) Access Digital Subscriber line c) Adavanced Digital subscriber loop d) None of these 151 | Train the Trainers : Teacher’s Hand b ook 13. SDSL stand for ______. a) System Digital Subscriber loop b) Symmetric Digital Subscriber line c) Advanced digital subscriber loop d) None of these 14. CMTS stands for ______. a) Cable Modem Termination System b) Cable Methods Termination System c) Both a & b d) None of these 15. ______is a new generation broad band Internet access technology allowing the delivery of high speed wireless Internet within a large area. a) World wide web b) Ethernet c) Wireless Broad band d) None of these 16. ISDN stands for ______. a) Internet Services Digital Network b) Integrated Services Digital Network c) None d) a & b 17. Www stands for ______. a) World wide web b) World worth web c) None d) a and b 18. URL stands for ______. a) Uniform Resource Locator b) Universal Resource Locator c) a & b d) None of these 19. Wi-Fi stands for ______. a) Wired Fidelity b) Wireless Fidelity c) None of these d) Both a & b 20. Regular Ethernet speeds upto ______. a) 10 mbits/s b) 20mbits/s c) 5 mbits/s d) None of these 21. Fast Ethernet speeds of upto ______. a) 100 mbit/s b) 50 mbit/s c) 200 mbit/s d) None of these 22. Gigabit Ethernet supporting speed of upto ______. a) 2 gbit/s b) 5 gbit/s c) 1 gbit/s d) None of these 23. 10 Gbit Ethernet, coming at up to ______. a) 100 gbit/s b) 10 gbit/s c) 30 gbit/s d) None of these 24. World wide web is not a ______. a) Internet b) Web browser c) None of these d) Both a and b 25. ______helped found, the World Wide Web consortium. a) Time Berners-Lee b) Charles Babbage c) None of these d) Harvey 152 | Train the Trainers : Teacher’s Hand b ook Answers Q.NO Ans Q.NO Ans Q.NO Ans Q.NO Ans Q.NO Ans 1 A 2 C 3 A 4 A 5 D 6 B 7 A 8 A 9 B 10 B 11 C 12 A 13 B 14 A 15 C 16 B 17 A 18 C 19 B 20 A 21 A 22 A 23 B 24 A 25 A 153 | Train the Trainers : Teacher’s Hand b ook UNIT- IV- PHOTOSHOP 1. ______DPI is necessary for asic 1 to 1 printing. a) 200 b) 300 c) 400 d) 100 2. To resize the image in Photoshop, click ______menu. a) File b) View c) Edit d) Layer 3. A simple technique to enhance the colors of your image is making it ______and ______. a) Vivid b) Alive c) both a & b c) Natural 4. The image in Photoshop is retouched by using ______modes. a) Blur b) Sharp c) Strong d) Layer Blending 5. ______tool is used for selecting pixels. a) Clone tools b) Text tools c) Selection tool d) None of the above 6. ______tool paint on pixels with the foreground color. a) Shape tool b) Zoom tool c) History Brush d) Brush tool 7. To get Desaturate option in Photoshop, we have to go to ______. a) File Menu b) Layer Menu c) Image>Adjustment d) None of the above 8. To get Auto contrast option in Photoshop, select ______. a) Filter Menu b) Image>Adjustment c) File Menu d) None of the above 9. How many Color Modes are there in Photoshop? a) Five b) One c) Three d) None of these 10. Is Overlay a Layer Blending Mode in Photoshop? a) Yes b) No c) Partial d) Non- partial 11. We can find Variation option under ______menu in Photoshop. a) Filter b) Blend c) Layer d) View 12. ______does not support background transparency. a) GIF b) JPEG c) TIFF d) None of these 13. ______Graphic consists of Pixels. a) Raster b) Vector c) Static d) None of these 14. Liquify is a Filter? a) True b) False c) Partial d) None of these 15. The short cut key of Feather is ______. a) Alt + Ctrl + F b) Alt + Ctrl + G c) Alt + Ctrl + I d) None of these 16. How many types of Gradient are there in Photoshop? a) Five b) Two c) Six d) Three 154 | Train the Trainers : Teacher’s Hand b ook 17. How many type of Marquee Tool are there in Photoshop? a) Seven b) One c) Four d) Two 18. Blurs edges by building a transition boundary between the selection and its surrounding pixels is known as ______. a) Anti-aliasing b) Feathering c) Healing d) None of the above 19. By default how many channel Indexed color images are there? a) One Channel b) 255 Channel c) 216 Channel d) 256 Channel 20. In Photoshop, maximum how many alpha channels can create in an image? a) 20 b) 22 c) 24 d) 26 21. Which command selects a specified color or color subset within an existing selection or an entire image? a) Replace Color b) Color Range c) Selective Color d) None of these 22. How many maximum steps we can undo in Photoshop? a) 10 b) 100 c) 1000 d) 10000 23. How many selection tools are there in Photoshop? a) 8 b) 4 c) 9 d) 2 24. Which one is the range of colors that a color system can display or print? a) The Gamut b) Color Mode c) Ditherinng d) None of these 25. Which one lets you isolate and protect areas of an image as you apply color changes, filters or other effects to the rest of the image? a) Mask b) Image Matte c) Opacity d) None of these Answers Q.NO Ans Q.NO Ans Q.NO Ans Q.NO Ans Q.NO Ans 1 B 2 C 3 C 4 D 5 C 6 D 7 B 8 B 9 A 10 A 11 A 12 D 13 A 14 B 15 A 16 D 17 B 18 B 19 D 20 C 21 B 22 B 23 A 24 B 25 A 155 | Train the Trainers : Teacher’s Hand b ook UNIT – II , III & V 1. HTML means ______. a) Hyper Text Markup Language b) Hypertext Makeup Language c) Homotext Makeup Language d) Homotest Markup Language 2. Tags are surrounded by ______. a) { } b) [ ] c) ( ) d) < > 3. Closing tag is prefixed by ______symbol . a) < b) _ c) / d) * 4. The advanced version of HTML is ______. a) HTML 3+ b) HTML 3 c) HTML 4+ d) HTML 4 5. ______is an empty tag. a) b b) br c) I d) p 6. The text between and describes the ______. a) page b) web page c) web site d) program 7. ______tag scrolls the text. a) Marquee b) b c) u d) h1 8. There are ______heading tags a) 8 b) 5 c) 4 d) 6 9. “#990000” represents ______color. a) White b) Black c) Red d) Rose 10. Font face refers to ______. a) Font size b) Font color c) Font style d) Attribute 11. Color is represented by ______digit. a)Decimal b) Hexa decimal c) Octal d) Unique 12. … tag makes the text ______. a) Italic b) Colored c) Bold d) Underline 13. URL means ______. a) Unique Resource Locator b) Uniform Research Locator c) Unique Research Location d) Uniform Resource Locator 14. .. refers to ______. a) Super script b) Sub script c) Super text d) Sub text 15. HTML program are typed in ______. a) Wordpad b) IE c) Notepad d) MS Word 156 | Train the Trainers : Teacher’s Hand b ook 16. tag refers to ______. a) Text b) Paragraph c) Plain text d) None of these 17. For ______tag the closing tag is optional. a) c) d) 32. Expansion of LAN is ______. a) Local Auto Network b) Line Automatic Network c) Local Area Network d) Line Auto Neuron 33. ______is used to upload or download images. a) FTP b) SMTP c) URL d) IP 34. ______protocol is used in Mail Transfer. a) FTP b) SMTP c) URL d) IP 35. Expansion of WWW is ______. a) World Wide Web b) Web World Wide c) World Web Wide d) Wide Web World 36. ______are two attributes of img tag. a) src, alt b) src, color c) alt, size d) alt, source 37. FTP means ______. a) File Transfer Protocol b) Folio Transfer Protocol c) File Transmit Protocol d) Folio Transmit Protocol 38. ______gives additional information about the tags. a) Attributes b) Heading c) Color d) Meta 39. refers to ______. a) Table data b) Table row c) Table d) Data 28. Code for black color is ______. a) #000001 b) #001000 c) #009870 d) #000000 29. The ______consortium is making the web standards a) World wide web b) Global c) Network d) World 30. ______is the largest heading tag. a) h1 b) h2 c) h3 d) h4 31. ISDN means ______. a) Internal Services Digital Network b) Integrated Services Digital Network c) Integrated Sustainable Digital Network d) Internal Sustainable Digital Network 157 | Train the Trainers : Teacher’s Hand b ook
tag inserts ______. a) A line b) A symbol c) A break d) None of these 40. In a program the usage of heading tags are limited upto ______. a) 6 b) 5 c) 4 d) 3 41. The common element which describes the webpage is ______. a) Heading b) Paragraph c) List d) All of these 42. Which tag is used for descriptive lists? a) d)
b)
c)
d)
44. The attribute of