To prevent accidents and machine damage, read these instructions before installation or use. Use the washer only as instructed in this owner’s guide and installation instructions included with your washer. Keep this guide for future reference
Front-Loading Automatic Washer Owner’s Guide & Installation Instructions
As an ENERGY STAR® partner, BLOMBERG has determined that this product meets the ENERGY STAR® guidelines for energy efficiency.
WM 77110 NBL01 Please read this guide first! Dear Customer, We hope that your product which has been manufactured in modern facilities and passed through a strict quality control procedure will give you the best results. Therefore, we advise you to read through this document carefully before using your product and keep it for future reference.
This guide will… …help you use your washer in a fast and safe way. • Please read the guide before installing and starting your washer. • Particularly follow the instructions related to safety. • Keep this guide within easy reach. You may need it in the future. • Please read all additional documents supplied with this washer. Please note that this owner’s guide & installation instructions may be applicable for several other models. Differences between models will be identified in the guide.
Explanation of symbols Throughout this guide the following symbols are used: CAUTION C ¾¾ Important information or useful hints about usage. WARNING A ¾¾ Warning for hazardous situations with regard to life and property. WARNING B ¾¾ Warning for electrical shock
If you have questions, call: Call Center (toll free number) 1-800-459-98-48 (USA) or send e-mail to: [email protected] For the list of dealers/retailers, distributors and authorized service agents, visit: http://www.blombergappliances.com
Please fill the information below for future reference.
Model no: Serial no: Purchase date:
2 / English Front-Loading Automatic Washer TABLE OF CONTENTS
1 Your Washer 5 Overview ...... 5 Specifications ...... 6
2 Important Safety Instructions 7
3 Installation Instructions 10 The Right Location of Installation ...... 10 Installation Clearances ...... 10 Allowable Clearances for Undercounter Installation ...... 11 Allowable Clearances for Closet Installation ...... 11 Stacked Installation ...... 11 Removing packaging reinforcement ...... 11 Removing shipping bolts ...... 12 Levelling the washer ...... 12 Electrical Connection ...... 13 Power supply and circuit ...... 14 Water Supply Connection ...... 14 Drainage ...... 15 Installation Checklist ...... 16 Transportation ...... 16 Disposal Information ...... 17 Appliance Disposal ...... 17
4 Operating Instructions 18 First Use ...... 18 Laundry Tips ...... 18 Preparing the laundry ...... 19 Loading the washer ...... 20 Detergent Use ...... 21 Detergent Quantity ...... 21 Detergent Dispenser ...... 22 Water Consumption ...... 24
Owner’s Guide & Installation Instructions 3 / English TABLE OF CONTENTS 5 Selecting a Program and Operating Your Washer 25 Control panel ...... 25 Display symbols ...... 26 Turning the washer on ...... 26 Program cycle selection ...... 26 Wash Cycles ...... 27 Additional programs ...... 27 Special programs ...... 28 Temperature selection ...... 28 Spin Speed selection ...... 28 Program Cycle Selection Table ...... 29 Auxiliary functions ...... 31 Time display ...... 32 Starting the Program ...... 33 Progress of program ...... 33 Changing the selections after the program has started ...... 33 Switching the washer to standby mode ...... 33 Child-proof lock ...... 34 Ending the program through canceling ...... 35 End of program ...... 35
6 Preparation 36 Starting ...... 36 Canceling a program ...... 36 Adding more laundry ...... 37 Re-spinning the laundry ...... 38 After the program is finished ...... 38
7 User maintenance instructions 39 Cleaning detergent dispenser ...... 39 Cleaning the door seal ...... 39 Cleaning the outer cabinet and control panel ...... 40 Cleaning the water inlet strainers ...... 40 Cleaning the drain pump filter ...... 41 Descaling the washer ...... 42
8 Troubleshooting 43
9 WARRANTY STATEMENT FOR THE BLOMBERG CLOTHES WASHERS 53
10 HOW TO GET SERVICE 54
4 / English Front-Loading Automatic Washer 1 Your Washer Overview
8 1
2
3
7
6
4
5
1 - Power Cord 5 - Height-adjustable Feet 2 - Top Lid 6 - Loading Door 3 - Control Panel 7 - Detergent Dispenser 4 - Filter Cap 8 - Drain Hose
Owner’s Guide & Installation Instructions 5 / English Your Washer Specifications
Front Loading Automatic Washer Models WM 77110 NBL01 Height (in) / (cm) 33.1 / 84 Width (in) / (cm) 23.6 / 60 Depth (in) / (cm) 21.7 / 55 Net Weight (lbs) / (kg) 159 / 72 Electricity (V/Hz.) 208-240 / 60 Total Current (A) 10 Total Power (W) 2000-2350 Spinning cycle (rpm max.) 1200 Water pressure (psi) / (bar) (15-145) / (1-10) Drain height (ft.) / (m.) 4.9 / 1.5 Wash capacity (cu. Ft.) 1.95 Dry Load Capacity (lbs)/(kg) 15.43 / 7
Specifications of this appliance may change without notice to improve the quality of the product. Figures in this guide are schematic and may not match your product exactly. Values stated on the washer labels or in the documentation accompanying it are obtained in laboratory in accordance with the relevant standards. Depending on operational and environmental conditions of the appliance, these values may vary.
6 / English Front-Loading Automatic Washer 2 Important Safety Instructions WARNING B ¾¾ To reduce the risk of fire, electric shock or injury to persons while using your appliance follow basic safety precautions, including the following: • Read all instructions before using the washer. • Do not wash articles that have been previously cleaned in, washed in, soaked in, or spotted with gasoline, dry-cleaning solvents, or other flammable or explosive substances (acetone, alcohol, kerosene, some liquid household cleaners, some spot removers, turpentine, waxes and wax removers) as they give off vapors that could ignite or explode. • Do not add gasoline, dry-cleaning solvents, or other flammable or explosive substances to the wash water. These substances give off vapors that could ignite or explode. • Under certain conditions, hydrogen gas may be produced in a hot-water system that has not been used for 2 weeks or more. HYDROGEN GAS IS EXPLOSIVE. If the hot-water system has not been used for such a period, before using a washing machine, turn on all hot-water faucets and let the water flow from each for several minutes. This will release any accumulated hydrogen gas. As the gas is flammable, do not smoke or use an open flame this time. • Do not allow children to play on or in the appliance. Close supervision of children is necessary when the appliance is used near children. • Before the appliance is removed from service or discarded, remove the door and the power cord / main plug to prevent accidents. • Do not reach into the appliance if the drum is moving. Wait until the drum has completely stopped before opening the door. • Do not install or store this appliance where it will be exposed to the weather and direct sunlight. • Do not tamper with controls. • Do not repair or replace any part of the appliance or attempt any servicing unless specifically recommended in the user-maintenance instructions or in published user-repair instructions that you understand and have the skills to carry out. • This appliance must only be used for the purpose of washing, rinsing and spinning machine- washable items using laundry additives that are suitable for use in washers . The appliance manufacturer cannot be held responsible for damage caused by improper or unintended use of the appliance. • Only detergents, softeners and additives suitable for use in HE (High-efficiency) washers may be used. Always follow the instructions and information given by the laundry detergent manufacturers when using these products.
• Always follow the fabric care instructions of garment manufacturers. • Do not touch the door glass while washing at high temperatures. Danger of burning! • Do not sit on top of the washer. • Do not climb onto the washer. • Destroy the shipping carton, plastic bag and other packing materials after the washer is unpacked. Keep children away from these packing materials. Danger of suffocation from plastic sheets and cartons!
Owner’s Guide & Installation Instructions 7 / English Important Safety Instructions
• Do not mix chlorine bleach with ammonia or acids such as vinegar and/or rust remover when washing. This mixture can produce hazardous fume which may cause death. • Do not operate this appliance if it is damaged, malfunctioning, partially disassembled, or has missing or broken parts, including a damaged cord or plug. • Store laundry detergents and additives in a cool, dry place out of children’s reach due to danger of chemical poisoning and skin irritation. Follow the manufacturers’ instructions when using laundry products. • Do not machine wash fiberglass materials. Small particles can stick to fabrics washed in following cycles and may lead to skin irritation. • Do not wash items stained with vegetable oil, cooking oil or petroleum. These items may contain some flammable oils after laundering and the fabric may smoke or catch fire by itself. • Be sure to unplug the power cable before attempting maintenance or cleaning of your appliance to minimize the risk of electric shock. Always unplug the cable by grasping the plug, not the cord. • Do not use wet hands when plugging/unplugging the power cable. • Check the water inlet and drain hose connections regularly for any leakage. Hoses should be replaced every 5 years. • Do not leave the washer door open to prevent children hurt themselves by hanging on the door or going inside the drum. • Be careful when the appliance is draining hot water. Danger of burning! • At the end of a washing day, turn off the water faucets to prevent any leakage that may occur due to a faulty condition of the appliance. • Check the appliance and inlet hose connections for water leakage after each use. If there is leakage, turn off the appliance and water faucets and call service. • Do not machine wash items having large or heavy metal parts such as buttons or buckles. These items could severely damage the appliance. • Always be sure to empty all foreign materials from the pockets of your clothing as small items such as coins, pins etc could severely damage the appliance. • Do not install and operate the appliance in places exposed to temperatures below freezing. Frozen water may cause severe damage by bursting hoses and pump. • Make sure that shipping bolts are removed before you operate the washer. If service is required as a result of not removing the bolts, it will not be covered by the warranty. • Make sure that the wash drum is empty before you load the washer. • Do not store and use any flammable and combustible substances such as lint, paper and chemicals near the appliance. • Always follow the manufacturer’s instructions when you are using a descaling agent. Be sure that descaling agent contains rust-protective materials and rinse the washer a few times thoroughly after the descaling process (See, Descaling the washer). • Install and operate the washer on a solid floor to prevent vibration or movement. It is not recommended to install and operate the washer on wooden floor or on a carpet. • The rated voltage of your washer is 208/240V, so it should not be directly connected to the mains of 110/120V. A special junction box will be provided and used for the mains connection (See, Installation Instructions for Grounding Instructions and Requirements). • If an abnormal sound is heard during the washer operation, refer to the “Troubleshooting” of this guide. • Call service for checking any possible damage or fault if the appliance is dropped or bumped. • The end of drain hose should not contact the discharge water in any way as this might cause siphoning of water. • Always leave the property after checking that the wash cycle is completed and the washer is turned off. • Damaged or worn power cords and plugs must only be replaced by a Blomberg Service technician.
8 / English Front-Loading Automatic Washer Important Safety Instructions
• Never use an extension cord or adapter to connect the appliance to the electrical power due to the risk of electric shock and/or fire. • All broken and faulty components, panels and parts must only be replaced with original Blomberg spare parts by a Blomberg Service technician. • Do not force the washer door open when it is locked. The door must be closed any time during the programme cycle. • Do not use fabric softeners or products to reduce static unless recommended by the manufacturers of the fabric softener product. • Check the drain pump filter occasionally to remove coins, buttons and such small objects. • Always drain off the water completely before cleaning the pump filter, before transporting the washer, when there is a danger of frost and when there is a power failure (For emergency draining, See User maintenance instructions). • Always be sure that the washer has been properly installed by licensed personnel, water and electrical connections and grounding conform to all relevant codes and requirements. • This manual does not cover every possible condition and situation that may occur. Use common sense and caution when installing, operating, and maintaining any appliance. SAVE THESE INSTRUCTIONS Always follow the instructions on this user guide. If you aren’t sure how to perform them, please call Customer Service for assistance and scheduling service.
WARNING A ¾¾ This product may ccontain chemicals known to the state of California to cause cancer or birth defects or other reproductive harm.
Owner’s Guide & Installation Instructions 9 / English 3 Installation Instructions
Read this first ! This washer can be individually installed in free-standing and built-in installations. You can also install your washer with your dryer as a free-standing or built-in pair. Before you install your appliance, read the following instructions completely and carefully: • Save these instructions for future reference. • This appliance must be properly installed and grounded by qualified and skilled technicians in accordance with all local codes and ordinances and the latest edition of the National Electrical Code, ANSI/NFPA 70. • Proper installation of this appliance is the responsibility of the owner and failure due to improper installation is not covered by the warranty. The Right Location of Installation You can install your washer in a basement, closet or in a laundry room if the location has proper drainage, plumbing and power supply system. Always follow these instructions for installation: • Do not install or store this appliance where it will be exposed to the weather, rain, damp places, water and direct sunlight. The ambient temperature must be higher than 60°F (15.6°C) for proper operation. Installation location must have the proper ventilation. • Do not store and use any flammable and combustible substances such as lint, paper, curtains, gasoline, coal and liquid or vapor chemicals near the appliance. • Install and operate the washer on a strong solid concrete floor to prevent vibration, noise or movement in case of load unbalance. The floor must have sufficient load carrying capacity and the washer must be leveled properly before the operation. • It is not recommended to install and operate the washer on a wooden floor or soft floor. If you have to install your washer on a wooden or frame construction floor, the floor must be reinforced properly and the washer must be located in the corner of the room if possible. • Never place your washer on a carpet. This prevents air circulation. The electrical components of the machine may overheat and cause damage. • Do not stand appliance on the power cable. • Do not install and operate your washer in ambient temperatures lower than 32˚F (0˚C). Controls may stop working properly in such condition. • If there is danger of frost, drain all remaining water in pump and hoses since it may freeze and cause damage by bursting them (see “Cleaning the drain pump filter”). Installation Clearances CAUTION ¾¾ The installation location must be large enough for the washer door to be fully opened for loading. C ¾¾ The installation location must be large enough for ease of operation, maintenance and service. ¾¾ Ensure there is min 1/2” of clearance on each side of the washer to allow slight side ways movement during washing and spin drying.
10 / English Front-Loading Automatic Washer Installation Instructions Allowable Clearances for Undercounter Installation The dimensions are for the recommended spacing. Counter depth should be 23.5-24.5”(60-62 cm). Custom undercounter installation – Washer only
Minimum counter width should be 50” (127 cm) for a pair of Blomberg washer & dryer. Custom undercounter installation – Washer & Dryer
50Ó (127 cm) Allowable Clearances for Closet Installation When installed in closet (washer only/washer dryer stacked) : Sides, Rear, Front 1/2 in. (1.27 cm), Top= 1 in. (2.54 cm) Closet door ventilation requirement: A louver having minimum 23 in2 (148 cm2) air opening located at 3 in (7.62 cm) from the bottom of closet door. Stacked Installation You can stack your Blomberg washer and dryer (model no: DV 16540 NBL00) by using a special stacking kit (Part No.2967100100). If necessary, consult your dealer or technical service for supplying the stack kit. In stacked closet installation, following configuration is necessary: A louver having minimum 23 in2 (148 cm2) air opening located at 3 in (7.62 cm) height from the bottom of closet door (for washer) & A louver of minimum 46 in2 (297 cm2) air opening located at 3 in (7.62 cm) distance from the top of closet door (for dryer). Removing packaging reinforcement Tilt the washer to remove the packaging reinforcement. Remove the packaging reinforcement by pulling the ribbon.
Owner’s Guide & Installation Instructions 11 / English Installation Instructions Removing shipping bolts WARNING B ¾¾ Shipping bolts must be removed before operating the washer! Otherwise, the appliance will be damaged seriously! 1. Loosen all the bolts with a spanner until they rotate freely (“C”)
2. Remove the shipping bolts by turning them gently. 3. Bolt hole covers (supplied in the bag with the owner’s guide) are fitted into the holes on the rear panel with a special lock mechanism. To fit the cover, first insert it into the hole and then rotate it counterclockwise with a screwdriver until it is locked. To unlock, apply the procedure in reverse. CAUTION ¾¾ Keep the shipping bolts in a safe place to reuse when the clothes washer C needs to be moved again in the future. ¾¾ Never move the appliance without shipping bolts properly fixed in place!
Levelling the washer WARNING B ¾¾ Do not use any tools to loosen the lock nuts. Otherwise, they can be damaged. 1. Manually (by hand) loosen the lock nuts on the feet. 2. Adjust them until the washer stands level and firmly. 3. Important: Tighten all lock nuts up again.
12 / English Front-Loading Automatic Washer Installation Instructions Electrical Connection Grounding Instructions This appliance must be grounded. In the event of malfunction or breakdown, grounding will reduce the risk of electric shock by providing a path of least resistance for electric current. This appliance is equipped with a cord having an equipment-grounding conductor and a grounding plug. The plug must be plugged into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances and the latest edition of the National Electrical Code, ANSI/NFPA 70. WARNING ¾¾ Improper connection of the equipment-grounding conductor can result in a risk of electric shock. Check with a qualified electrician or serviceman if you are in doubt as to whether the appliance is properly grounded. ¾¾ Do not modify the plug provided with the appliance – if it will not fit the outlet, have a proper outlet installed by a qualified electrician. ¾¾ Be sure that the power cord is always accessible by the user after the appliance is installed. ¾¾ Never use an extension cord or adapter to connect the appliance to the electrical power due to the risk of electric shock and/or fire. ¾¾ It is the personal responsibility and obligation of the appliance owner to provide a proper and grounded outlet installed by a qualified electrician. ¾¾ Never use a damaged power cord since there is a risk of electric shock and/ or fire. ¾¾ The damaged power cord must be replaced by a qualified electrician as soon as possible. ¾¾ Electrical supply voltage must conform to the voltage specifications (208- B 240V, 60Hz) located on the appliance. For this purpose, a junction box (as seen in picture below) must be obtained. Junction box is supplied with Blomberg Clothes Dryer (model no: DV 16540 NBL00) and it works as a voltage converter from 110/120V to 208/240V between the mains and appliance.
¾¾ Only one appliance must be connected to a properly grounded individual branch circuit outlet. ¾¾ Be sure to unplug the power cable before attempting maintenance or cleaning of your appliance to minimize the risk of electric shock. Always unplug the cable by grasping the plug, not the cord. ¾¾ Do not use wet hands when plugging/unplugging the power cable.
Owner’s Guide & Installation Instructions 13 / English Installation Instructions Power supply and circuit Connect the clothes washer to the junction box supplied. Junction box must be connected to an earthed outlet protected by a fuse of suitable capacity. Important: • Mains connection should comply with national regulations. • The voltage and maximum total current are specified in the section “Specifications”. • The appliance must not be directly connected to the mains in case of absence of junction box. • Connection via extension cords or multi-plugs should not be made. WARNING ¾¾ A damaged power cable must be replaced by a qualified electrician. B ¾¾ The appliance must not be operated unless it is repaired! There is the risk of electric shock! 15 Amp. Fuse or circuit breaker, 208-240 volt, 60 Hz, grounded, alternating current Properly grounded 3-prong receptacle and junction box to be located so the power supply cords are accessible when the washer is in installed position. Water Supply Connection Your washer comes with both cold and hot water connections. Connect the blue marked cold water supply hose to the cold water inlet valve/faucet and the red marked hot water intake hose to the hot water inlet valve/faucet. Screw the connecting bolts by hand and tighten the connection properly using a plier. Over tightening may cause damage on bolted connection. WARNING B ¾¾ Be sure that the water connection of this washer is handled by a qualified service technician or a plumber. The washer has two bolted ½’’ water supply hoses and ¾’’ female hose connections that can be connected to ¾’’ hot and cold water faucets.
14 / English Front-Loading Automatic Washer Installation Instructions
WARNING ¾¾ Be sure that there are rubber seals located on the hose connections. These seals and adjustable bolts ensure a safe connection without leaking. After the B water connection is done, turn on both water faucets slowly and completely to check any water leaks. ¾¾ Be sure that water supply hoses are not crushed and they have no kinking, bulges or cuts before the water connection. The water pressure must be between 15-145 psi (1-10 bar) for the proper operation of this washer. 1 bar corresponds to more than 2.1 US gallons (8 liters) per minute flow rate with a fully open faucet. Water inlet hoses and valves should withstand a water pressure of 145 psi (10 bar) at maximum. If the pressure is higher than 145 psi, a pressure-reducing valve must be installed before the water inlet. If the water pressure is lower than 15 psi (1 bar), water fill time may extend or water inlet valve may shut off completely. • Hot water supply temperature must not exceed 140˚F (60˚C). (Ideally 120˚F (48˚C)) • Do not connect the washer to an unpressurized water boiler since water pressure may not be adequate for proper operation. • Do not remove the filters located on the water supply hoses (on faucet/hose and hose/inlet valve connections). • Always use genuine “Blomberg” water supply hoses when connecting with this washer. Old or worn-out hoses must not be reused. It is not advised to extend inlet or drain hoses, if necessary consult your dealer or technical service about hose extensions. • Hot and cold water faucets must always be easily accessible to the user. • At the end of a washing day, turn off water faucets to prevent any leakage or water damage that may occur due to a faulty condition of the appliance. • Check the appliance and inlet hose connections for water leakage after each use. If there is leakage, turn off the appliance and water faucets and call service. • Check the water inlet and drain hose connections regularly for any leakage. Hoses should be replaced every 5 years. • If there is no hot water supply, hot water valve must be connected to a cold water faucet nevertheless. Both water valves should be connected to water supply for proper operation of your washer.
Drainage WARNING B ¾¾ Drain hose should not be bent. Be sure that there are no kinks or cuts on it. ¾¾ Drain hose outlet must not contact the drained water. Drain hose may be connected into a sink, into the drain of a sink, to a standpipe and floor drain. • When connecting into a sink, the drain hose should be placed at the edge of the sink and secured with the hose guide supplied by the manufacturer. Additionally, the guided hose may be tied to the water faucet with a strap for extra security. • Drain hose may be connected into the drain of a sink . Be sure that the connection is safe and not leaking. An additional clip etc can be used for safe connection. • Drain hose may also be connected to a minimum 1.26 in (32 mm) diameter stand pipe.
Owner’s Guide & Installation Instructions 15 / English Installation Instructions
• Be sure to secure the drain hose tightly to the pipe (stand pipe, drain pipe/edge of the sink) with a strap etc. • The hose should be placed between 16 and 39 in. (40 and 100 cm) from the floor level • If you have floor drain system, you can place the drain hose in the hole located on the floor.
Installation Checklist • Water inlet hoses and accessory bags must be removed from the wash drum. • Transportation/shipping bolts must be removed. • Washer must be properly leveled by using the adjustable feet. • Water inlet hoses are connected to the water faucets, secured and checked for any leaks by turning on both faucets. • Drain installation is done properly and drain hose is checked and secured to prevent any flooding. • Washer is connected the junction box which is plugged to a properly grounded live mains outlet. • Be sure that power outlet, water faucets and drain outlet must be always accessible to the user.
Transportation Before you transport the washer, you should carry out the following: 1. Turn off both water faucets. 2. Before you disconnect the water inlet hoses, decrease the pressure inside hoses by turning on the washer choosing any wash program. As soon as the Start/Pause/Cancel led starts blinking, turn off the appliance. You may securely disconnect inlet hoses without any water gush. 3. Disconnect the drain hose and hang it on the back plate by inserting into the holder plastic brackets. 4. Unplug the power cord and hang it on the back plate by inserting into the holder plastic brackets. 5. Remove bolt hole covers and reinstall shipping bolts to their places. You can apply the procedure in chapter “Removing shipping bolts” in reverse to accomplish this. 6. Be sure that rubber bushes are properly located in holes and bolts are screwed back tightly for secure transportation of the appliance.
16 / English Front-Loading Automatic Washer Installation Instructions Disposal Information Packing Disposal WARNING ¾¾ Packing materials of the appliance are potentially dangerous for children. A Materials such as plastic bags, films or wrappings must be kept away from children or disposed properly to prevent the danger of suffocation. CAUTION ¾¾ Packing materials are made of biodegradable and recyclable substances. You C should consult your local authority or dealer about the environmental-friendly disposal of the packaging of your appliance.
Appliance Disposal WARNING ¾¾ Be sure to unplug the power cable, cut off the plug and disable the door lock A before you dispose your old appliance. Otherwise there is a risk of injury for children and pets. CAUTION ¾¾ Old appliances contain many recyclable parts. You should consult your local C environmental authority about a proper disposal. A proper disposal enables recycling therefore protects the environment.
Owner’s Guide & Installation Instructions 17 / English 4 Operating Instructions First Use WARNING A ¾¾ To reduce the risk of fire, electric shock, or injury to persons, read the IMPORTANT SAFETY INSTRUCTIONS before operating this appliance. Before the first use, • Be sure that the washer is installed properly by a qualified installer or service technician in accordance with all national and local codes and requirements. • Read all instructions carefully before using the washer. • Check that shipping bolts are completely removed. • Be sure that the location of installation has proper electrical supply voltage (junction box must be used for connecting the washer to the mains) and plumbing system needed for the operation of the appliance. • Turn on both water faucets and be sure that there are no leaks on hose-faucet connection points or on hoses themselves.
• Check that the wash drum is empty. • Turn on the washer, choose “sanitary” cycle on the program selector knob and start the washer as empty and without any laundry additives. When the cycle is finished, your washer is ready for subsequent uses. Laundry Tips Sorting the laundry CAUTION ¾¾ Always follow the fabric care instructions of garment manufacturers. These C instructions would give you proper guidance on suitable wash cycles, wash temperatures and bleach usage.
18 / English Front-Loading Automatic Washer Operating Instructions
CAUTION ¾¾ Wash the items which are care labeled as “machine-washable”. Do not machine wash items that are having symbol on fabric care label. C ¾¾ Sort the laundry according to the following fabric types, color groups and wash them separately:
• White and color fast fabrics • Non-fast, colored fabrics • Permanent press items(mens shirt, dress pants, poly-cotton blends) • Delicate fabrics (silk, rayon etc.) • Woolens (only wash woolens that are labeled “machine washable” or “hand washable” • Hand knits (They should be placed inside out in the washer) CAUTION ¾¾ Do not wash dark colors with light colors and whites. Color items may bleed and white and light colored items may be discolored. Avoid extended contact of damp clothes before or after washing to prevent dye transfer. C ¾¾ Wash heavily and lightly soiled items separately. ¾¾ Lint producers (towels, linen etc) and lint collectors (easy care, permanent press) should be washed separately. Lint producers should be washed inside-out. Preparing the laundry • Items of laundry with metal parts (e.g. underwire bras, belt buckles, metal buttons) will damage the washer. Remove metal parts of place the items in a cloth bag, pillow case, or something similar. • Remove any non-washable items and accessories from laundry before washing. • Empty pockets, remove all foreign objects (e.g. coins, pens, paper clips). If possible: Turn pockets inside out and brush. • Place small items of laundry (e.g. tights) in a cloth bag, pillow case or something similar. This can also help you to avoid searching for lost socks. • Handle curtains special care. Remove non-stainless curtain runners and lead tape. Place runners that can’t be removed in a cloth bag, pillow case or something similar. • Heavy stains should be pretreated with soapy water appropriately before washing (Do not rub or scratch the stained area). If in doubt, check with a chemist or dry-cleaner. • Use only dyes/discoloring and anti-scaling agents suitable for machine wash. Make sure to follow the instructions on the package. WARNING A ¾¾ Wash jeans, delicates, pants and sweat-shirts inside-out.
Owner’s Guide & Installation Instructions 19 / English Operating Instructions Loading the washer Maximum load capacity depends on the fabric type of laundry, soiling amount of laundry and program cycle you wish to use. CAUTION ¾¾ Do not exceed the maximum load capacity of the selected program cycle. C Washing results are adversely affected by an overloaded drum. Overloading may also cause wrinkling and abrasion on clothes. Make sure power button is off before loading the washer. To load the washer, • Pull the door handle. • Place laundry items loosely in the drum. • Mix small and large items for an even load distribution. Large items should be loaded first. Large items should not be more than half of the total wash load. • If you put a wash bag or net which is filled with small items in the drum, put an additional wash bag to prevent load unbalance. Both wash bags should have the same amount of items to provide an even load distribution. • Before washing a single or a few items such as a pillow, a teddy bear, a single or a pair of shirts, sweat shirts etc, put some additional items in the drum for better load distribution and spinning. • Make sure that there is no clothing obstructing the door or caught between the door and rubber seal. • Push the loading door firmly shut until you hear it lock into space (especially if you load the washer with full load or big items). • In case the door is not locked, “door” expression will appeare on the screen. In that case, door should be opened and closed again firmly. • If the door is not closed completely, the machine will not start. This is a safety precaution. The front door is locked until end of the washing program and it can not be opened untill the door icon on LCD is off following the end of the program. • Unload the washed items just after the program cycle has finished. Delay of unloading may cause wrinkling and unwanted odor on laundry. • Check to see any small metal items such as pins, coins etc left in rubber seal while unloading the washer. Any residual metal items may cause rusting on the rubber seal. • If there is any water left in rubber seal, remove with a soft cloth.
20 / English Front-Loading Automatic Washer Operating Instructions Detergent Use About Detergent CAUTION C ¾¾ Your washer is designed to use only HE (high efficiency) detergents. You should always look for the following symbol on the label of detergents: If you use a non-HE detergent with this washer, high sudsing will occur. High sudsing will decrease tumble action effectiveness, washing and rinsing performance worsen. Suds may flow out of detergent dispenser giving damage to your washer. CAUTION C ¾¾ The detergents labeled as “HE compatible” may also lead to high sudsing and inefficient tumble action. Don’t use such detergents.
Always follow the instructions and information given by laundry detergent manufacturers when using these products. WARNING A ¾¾ Store laundry detergents and additives in a cool, dry place out of children’s reach due to danger of chemical poisoning and skin irritation.
Detergent Quantity The amount of washing detergent to use depends on the amount of laundry, the degree of soiling and water hardness. For small amounts of laundry or only slight soiling use accordingly less detergent. Too much detergent causes an excessive amount of foaming, bad washing and rinsing results and a strain on water resources. Too little washing detergent causes laundry to turn grey and calcification of the machine. Recommended amount of powder detergent is max. 1/3 cup (80 ml). Recommended amount of liquid detergent is max. 1/4 cup (60 ml).
Light soiling No visible stains or soiling Normal soiling A few visible light stains or soiling Heavy soiling Highly visible stains or soiling
Owner’s Guide & Installation Instructions 21 / English Operating Instructions Detergent Dispenser Detergent dispenser of your washer has three separate compartments for main wash detergent, fabric softener and liquid bleach. Each of these laundry additives are automatically dispensed at appropriate time during wash program. CAUTION ¾¾ Do not put laundry additives directly in the wash drum. Always use the detergent dispenser. ¾¾ After adding laundry additives do not close the drawer too quickly. This may C cause early dispensing of the additives thus poor wash results and fabric damage. ¾¾ Do not open the drawer during wash program (except for addition of liquid main wash detergent at the beginning of main wash water intake). Dispenser compartments are as follows: -left compartment numbered as “II” (main wash compartment) -middle compartment marked as “ ” (liquid fabric softener compartment) -right compartment numbered as “I” (liquid chlorine bleach compartment)
(II) Main Wash Detergent Compartment Add HE (High efficiency) powder detergent to this compartment numbered as “II” before starting the wash program. Use the detergent manufacturer’s dosing cup and follow the instructions on the package. If you use a liquid detergent, be sure to use a HE (High efficiency) detergent and add detergent directly to main wash compartment before operating your washer. If you observe liquid detergent stains on washed items, it is recommended for subsequent wash cycles that you should add liquid detergent during first water intake.
Color-safe bleach in powder or liquid form may be added into main wash detergent compartment with main wash detergent. Be sure to use main wash detergent and color-safe bleach in same form (either powder or liquid) when adding into main wash compartment.
22 / English Front-Loading Automatic Washer Operating Instructions
Liquid Fabric Softener Compartment Add the recommended amount of liquid fabric softener to the middle compartment marked as “ ” and dilute it with warm water to the maximum fill line. CAUTION C ¾¾ Especially concentrated fabric softeners must be diluted with warm water otherwise siphon may be clogged in time. Do not fill the fabric softener above the maximum fill line as any excess amount will mix into the wash water and you will have to re-fill the compartment. Do not pour the softener directly onto laundry, it may cause stains. Liquid fabric softener is automatically dispensed during the final rinse of wash program.
Using liquid detergents If the product contains a liquid detergent cup: • Make sure that you have placed the liquid detergent cup in compartment nr. “2”. • If the liquid detergent has lost its fluidity, dilute it with water before putting in the detergent cup.
If the product does not contain a liquid detergent cup: • Do not use liquid detergent for the prewash in a program with prewash. • Liquid detergent stains your clothes when used with Delayed Start function. If you are going to use the Delayed Start function, do not use liquid detergent.
Owner’s Guide & Installation Instructions 23 / English Operating Instructions
(I) Liquid Chlorine Bleach Compartment Add liquid chlorine bleach to the right compartment numbered as “I”. Measure 1/3 cup (80 ml) of bleach and pour it into the special container located in the right compartment of the dispenser. This container ensures dispensing and dilution of bleach during the first rinse of wash cycle. There is a maximum fill line on the container. Do not exceed the maximum fill line to prevent early dispensing. Early dispensing may damage your clothes. CAUTION ¾¾ Be sure that bleach container is present in the right compartment of dispenser before you add liquid bleaching agent. You may remove bleach container if you would not use bleach. However do not put any other laundry C additives to the empty compartment. ¾¾ Be sure to choose extra rinse option if you are using bleach in wash program. Bleach must be rinsed from laundry properly otherwise it may cause skin irritation. Bleach is automatically dispensed and diluted during the first rinse of wash program. WARNING ¾¾ Bleach may only be used in Regular/Cotton and Permanent Press cycles. Don’t use bleach with delicates, hand washables or wools, it will lead to A clothes damage. ¾¾ The liquid bleach cup insert must be removed if not using liquid bleach to avoid water leaking from the dispenser.
Water Consumption Your clothes washer automatically adjusts the water consumption according to load amount. This feature ensures high wash performance results with efficient water and energy consumption.
24 / English Front-Loading Automatic Washer 5 Selecting a Program and Operating Your Washer Control panel
1 2 3 4 5
6 7 8
1 - Spin Speed Adjustment Button 2 - Display 3 - Temperature Adjustment Button 4 - Program Selection Knob 5 - On/Off Button 6 - Time Delaying Button (+/-) 7 - Auxiliary Function Buttons 8 - Start/Pause/Cancel Button
Owner’s Guide & Installation Instructions 25 / English Selecting a Program and Operating Your Washer Display symbols a b
k c i d h e f g a - Door Locked Symbol b - Time Delaying Symbol c - Temperature Indicator d – Water cut-off symbol (According to your machine’s model) e - Standby Symbol f - Start Symbol g - Auxiliary Function Symbols h - Program Indicator Symbols (Soak/main wash/rinse/softener/spin) i - Remaining Time and Delaying Time Indicator k - Spin Speed Indicator
Turning the washer on Plug in your washer. Turn the tap on completely. Check if the hoses are connected tightly. Place the laundry in the washer. Add detergent and softener. Press the “On/Off” button.
Program cycle selection Select the appropriate program from the program table according to type, amount and degree of soiling of the laundry and washing temperatures. Turn the Program Selection Knob to the program mode that you wish to wash your laundry. The recommended temperature and spin speed for the selected program appear. Press “Start/Pause/ Cancel” button to start the program.
26 / English Front-Loading Automatic Washer Selecting a Program and Operating Your Washer Wash Cycles Depending on the type of fabric, the following main programs are available. Each of these main programs comprise of a complete washing process, including washing, rinsing and, if required, spin cycles. WARNING ¾¾ When selecting the program you are going to use, always consider type of A fabric, color, degree of soiling and permissible water temperature. ¾¾ Always select the lowest required temperature. Higher temperature means higher power consumption. CAUTION C ¾¾ For further program details, see “Program Cycle Selection Table”
•Regular/Cotton You can wash your durable white and colorfast items with this cycle. Washes with vigorous tumbling movements in a longer washing cycle. It is recommended for your cotton or linen items (such as bed sheets, pillowcases,jeans,towels, bathrobes,garments, T-shirts,sweat-shirts , etc.). You can select wash temperature according to the soiling level and/or care label of items. Sanitary should be chosen for items that need extra hygiene such as baby clothes, kitchen towels and garments. •Sanitary You can wash your durable white and colorfast items with this cycle. Washes with vigorous tumbling movements in a longer washing cycle. It is recommended for your cotton or linen items that need extra hygiene such as baby clothes, kitchen towels and garments. • Permanent Press You can wash your easy care items on this cycle. Washes with gentler tumbling movementsand in shorter washing cycles. It is recommended for your cotton,synthetic or blended items (such as shirts, pants, wrinkle-free items, etc.). You can select wash temperature according to the soiling level and/or care label of items. •Delicates You can wash your delicate easy-care and wrinkle-free items on this program. It has more sensitive tumbling movements and does not do intermediate spinning compared to the permanent program. It must be used for cotton, synthetic or blended clothes for which sensitive washing is recommended. •Wools You can wash your machine-washable wool items on this program. It is recommended to use appropriate detergents and laundry additives for wools. Additional programs For special cases, there are also extra programs available: C Additional programs may differ according to the model of your washer. • BabyProtect Increased hygiene is provided by a longer heating period and an additional rinse cycle. It is recommended for baby clothes and clothes worn by allergic people. • Hand wash You can wash your woolen/delicate clothes that bear “hand wash only” labels for which hand wash is recommended on this program. It washes the laundry with very tender washing movements without damaging your clothes.
Owner’s Guide & Installation Instructions 27 / English Selecting a Program and Operating Your Washer
• Quick Wash This program is used to wash a few very lightly soiled and unstained cotton, synthetics or blended items in a short time. e.g.: daily clothes that have been used only once. • Sports This program is used to wash half capacity of normally or lightly soiled daily cotton, synthetics or blended clothes. e.g.: daily clothes and sportswear that have been used only once. • Jeans This programme is used to wash half capacity of normally or lightly soiled jeans and denim jackets. Turn your jeans or jackets inside out before washing. You shouldn’t wash more than four pair at a time, this may cause an unbalanced load in the washer. Special programs For specific applications, select any of the following programs: • Rinse This cycle is used when you want to rinse separately. • Drain & Spin This program is used to discharge the water and spin dry the load with selected spin speed. Spin&Drain may be selected as one program in this model. CAUTION C ¾¾ You should select a lower spin speed for delicate wash items. Temperature selection Whenever a new program is selected, the temperature anticipated for that program appears on the temperature indicator. To change the temperature, press the temperature button. There are four temperature options being cold,warm,hot and extra hot. Temperature selectability depends on the type of wash cycle. When the “Temperature” button is pressed after Cold is selected, the maximum temperature of the program you have selected will be displayed. To decrease the temperature, press the “Temperature” button again. Spin Speed selection Whenever a new program is selected, the maximum spin speed of the selected program is displayed on the spin speed indicator. To decrease the spin speed, press the “Spin” button. Spin speed decreases gradually. Then, rinse hold and no spin options are shown respectively. You can use no spin function in order to drain the water without spinning at the end of the program.
28 / English Front-Loading Automatic Washer Selecting a Program and Operating Your Washer Program Cycle Selection Table Wash Cycle Wash Load Type Soil Level Intake (1) Water Wash water Temp. Max Spin Speed (rpm) (2) Load Capacity (max) (3) Bleach (4) Options Available Extra Hot Heavy Hot 145F / 63°C White and colorfast items made Normal/ Regular/ Hot of cotton and linen (towels, Heavy Hot 122F / 50°C Cotton jeans, T-shirts, sweatshirts, 1200 Full • SW,S,R,A Warm work clothes) Light Hot-cold 91F/ 33°C Cold Light Cold 60F / 15°C White and colorfast items made of cotton and linen (baby Sanitary Extra Hot clothes, garments, sheets, Heavy Hot 158F / 70°C 1200 Full • SW,S,R,A pillowcases, kitchen towels, tablecloths) Extra Hot Hot 158F / 70°C Hot Hot 126F / 52°C BabyProtect Baby clothes and clothes worn Normal/ by allergic people Heavy 1200 Full • SW,S,R Warm Hot-cold 95F/ 35°C
Easy-care items made of Hot Normal/ Hot 126F / 52°C Permanent cotton, linen, synthetics or Heavy Press Warm blends (dress shirts/pants, Light Hot-cold 95F/ 35°C 1000 1/2 • SW,S,R,A wrinkle-free items, poly/cotton Cold blends) Light Cold 60F / 15°C Warm Normally or lightly soiled daily Normal Cold 95F/ 35°C Sports cotton, synthetics or blended 1000 1/2 x SW,S,R Cold clothes. e.g.: sportswear Light Cold 60F / 15°C Normal/ Hot Heavy Hot-Cold 126F / 52°C Jeans Warm Jeans and denim jackets Normal Hot-Cold 95F/ 35°C 1000 1/2 x SW,S,R,A Cold Light Cold 60F / 15°C Warm 86F/ 30°C Quick Wash Very lightly soiled cotton, Very Light Cold 1000 1/4 x R Cold synthetics or blended items 60F / 15°C Warm Delicate easy-care and wrinkle- Light Hot-cold 95F/ 35°C free items made of cotton, Delicates linen, synthetics or blends 1000 1/3 x SW,S,R,A Cold (dress shirts, blouses, curtains, Light Cold 60F / 15°C sheer or lacy garments) Warm Hand washable items made of Light Cold 86F/ 30°C Hand Wash synthetics, wool and silk (bras, 1000 1/4 x SW,R Cold special care garments, lingerie) Light Cold 60F / 15°C Warm Light Cold 95F/ 35°C Wools Machine washable wool items 1000 1/4 x SW,R Cold Light Cold 60F / 15°C Rinse Any - Cold 60F / 15°C 1200 Full x - Drain & Spin Any - - - - Full - - • : Selectable * : Automatically selected, not cancellable. - : See program description for maximum load. Selectable options of a wash cycle are extra rinse “R”, super wash “SW”, soak "S" and anti crease “A”.
Owner’s Guide & Installation Instructions 29 / English Selecting a Program and Operating Your Washer
1. Even if there is no hot water system, hot water inlet must still be connected to another cold water faucet. Otherwise a fault will occur on water intake.
2. Programs are limited with the maximum spin speed appropriate for that particular type of load. 3. Maximum load capacities are suggested for various load types. Wash cycles of full load (Regular/ Cotton, permanent press) should be half loaded for better wash results if the laundry is heavily soiled. Half loading would also minimize wrinkling of the load. 4. Bleach may only be used in Regular/Cotton and Permanent Press cycles. Don’t use bleach with delicates, handwashables, wools, jeans and sports, this will lead to clothes damage.
CAUTION ¾¾ The auxiliary functions in the table vary according to the model of your washer. ¾¾ Water and power consumption and program duration differ from the table C subject to changes in water pressure, water hardness and temperature, ambient temperature, type and amount of laundry, selection of auxiliary functions, and changes in supply voltage. ¾¾ Program duration will be displayed on the screen of your washer according to your selection.
30 / English Front-Loading Automatic Washer Selecting a Program and Operating Your Washer Auxiliary functions Auxiliary Function Selection Buttons
a b c d • Depending on the program, you can select the desired auxiliary function by pressing the buttons a, b, c, d. • Select the required auxiliary functions before starting the program. • Symbol of the selected auxiliary function will light up.
Auxiliary function selection Auxiliary function that is not compatible with the program cannot be selected. (see, “Program Cycle Selection Table”) • Super Wash This function (a) increases washing times for heavily soiled items for better wash results. Washer will only take in cold water when this function is chosen. This function also increases the amount of rinse water for “Regular/Cotton” cycle. • Soak This function (b) is used for heavily soiled items when you want to pre-treat them before washing. Laundry is soaked in a relatively high amount of warm water for an hour and a half approximately. You can use full load and HE “High efficiency” detergent for soaking. Use 1/3-1/2 of the recommended detergent dosage for the load amount to be soaked. • Extra Rinse When this function (c) is selected, you can increase the number of current rinsing steps. Thus, sensitive skins’ risk of being affected by the remaining detergent on the clothes will be decreased. • Anti-Crease With this function (d), drum movement will be lessened to prevent creasing and spinning speed is limited. In addition, washing is carried out at a higher water level. • Use this function for delicate laundries that crease easily. CAUTION C ¾¾ Whenever you select this auxiliary function, load your washer with half of the maximum laundry specified in the program table.
Owner’s Guide & Installation Instructions 31 / English Selecting a Program and Operating Your Washer Time display The display shows the time remaining for the program to complete while a program is running. Time is displayed in hours and minutes as “01:30”.
Time delay With the “Time delay” function you can delay the program start up to 24 hours. Setting can be made in intervals of 30 minutes. 1. Open the loading door, place the laundry inside and fill detergent drawer. 2. Set the washing program, temperature, spin speed and, if required, select the auxiliary functions. 3. Press “Time delaying” buttons “+” and “-” to set your desired time delay. The Time delaying symbol will flash. 4. Press “Start/Pause/Cancel” button. Then the time delay starts to count down. The Time delaying symbol will light up. The Start symbol will light up. The “:” in the middle of the displayed time delay will start to flash. • More laundry may be loaded or taken out during the time delay period. At the end of the time delay countdown process, time delaying symbol fades and the washing starts as the program duration is displayed.
Changing the delay time If you want to change the time during the countdown: 1. Press “Start/Pause/Cancel” button. “ : “ in the middle of the screen will stop flashing. The Standby symbol will light up. The Time delaying symbol will flash. The Start Symbol will fade. 2. Press “Time delaying” buttons “+” or “-” to set your desired time delay. 3. Press “Start/Pause/Cancel” button. The Time delaying symbol will light up. The Standby symbol will fade. The Start symbol will light up. 4. The “:” in the middle of the displayed time delay will start to flash.
Canceling the time delay If you want to cancel the time delay countdown and start the program immediately: 1. Press “Start/Pause/Cancel” button The “:” in the middle of the displayed time delay will stop flashing. 2. Start symbol will fade. The standby symbol and the time delaying symbol will flash. 3. Press time delaying button “-” to decrease the desired time delay. Program duration after 30 minutes shall be displayed. 4. Press Start/Pause/Cancel Button to start the program.
32 / English Front-Loading Automatic Washer Selecting a Program and Operating Your Washer Starting the Program 1. Press Start/Pause/Cancel button to start the program. 2. The start symbol which indicates that the program has started will light up. 3. The door locks and the door locked symbol will light up. 4. The Symbol of the relevant step (prewash, main wash, rinse, softener and spin) that the program has started from will light up.
Progress of program The progress of a running cycle is shown through a number of symbols on the screen. • At the beginning of each program step, the relevant symbol in the series of symbols will light up and thus, at the end of the program, all symbols will remain lit up. The symbol that lights up at the far right of the series of symbols indicates the step that is being carried out.
Soak When “Soak” auxiliary function is selected, soak symbol will light up to indicate the beginning of this wash step. Main wash Main wash symbol will light up to indicate that the main wash cycle has started. Rinse Rinse symbol lights up at the beginning of the rinse step. Softener Softener symbol lights up at the beginning of softener step. Spin Spin symbol will light up at the beginning of the final spin, during “Drain&Spin” special programs. • If the washer is not spinning, the program may be in rinse hold mode or the automatic spin correction system has been activated due to an excessive unbalanced distribution of laundry in the washer. Changing the selections after the program has started The selected spin speed and program temperature fade out. An empty frame appears. When the “Program selection” button is brought to the appropriate position, rpm and temperature data reappear. Switching the washer to standby mode The washer is switched to standby mode by pressing “Start/Pause/Cancel” button momentarily. The Standby symbol which indicates the washer is in standby mode lights up and the start symbol that shows the program has started and is still continuing fades out. Selecting or canceling an auxiliary function in pause mode Auxiliary functions can be cancelled or selected in accordance with the step the program is at. Adding/removing laundry in pause mode The door can be opened if the water level is suitable. The door locked symbol will light up until the door is suitable for opening. This symbol will fade out as soon as the door is allowed to open. Laundry may be added / taken out by opening the door.
Owner’s Guide & Installation Instructions 33 / English Selecting a Program and Operating Your Washer
Door lock The Door Locked Symbol lights up when the loading door is locked. This symbol will flash until the door is allowed to open. Do not force the door at this stage. This symbol will fade out as soon as the door is allowed to open. You may open the door after the symbol fades out.
When the electricity is off in door locked position, door will keep the locked position for two minutes. After two minutes, door is allowed to open.
In case the door is not locked, “door” expression will appeare on the screen. In that case, door should be opened and closed again firmly. Child-proof lock Protect the appliance from being tampered by children by means of the child-proof lock. In this case, no change can be made in the running program. CAUTION ¾¾ Your washer can be turned on and off with On/Off button while the child- C proof lock is activated. In this case, your washer will resume its program with child-proof lock activated. The washer is switched to child-lock by pressing the 2nd and 4th auxiliary functions for 3 sec. “C:on” (Child-proof lock is activated) label appears on the display.
The same symbol will also be displayed whenever any button is pressed while the washer is child- locked.
34 / English Front-Loading Automatic Washer Selecting a Program and Operating Your Washer
To deactivate the child-proof lock, press the 2nd and 4th auxiliary function buttons for 3 sec. “C:OFF” (Child-proof lock is deactivated) label appears on the screen.
Ending the program through canceling “Start/Pause/Cancel” button is pressed for 3 seconds to cancel the program. Start symbol will flash during cancellation. After cancellation, the symbol of the corresponding step at which the cancellation was made will remain lit and “End” will appear on the screen.
End of program When the program is finished, the symbols of the relevant steps will remain lit up and the auxiliary function, spin and temperature data selected at the start-up of the program will remain selected. “End” will appear on the display.
Owner’s Guide & Installation Instructions 35 / English 6 Preparation 1. Turn on both hot and cold water faucets fully. Check and be sure the water connection is tight. 2. Place the laundry in the drum. 3. Add laundry additives (e.g. detergent, fabric softener,bleach).
Starting 1. Press the “On/Off” button. 2. Select the appropriate wash cycle and temperature suitable for your items. 3. If required: – select any auxiliary function, – adjust the spin speed, – set the time delay, 4. Close the loading door. 5. Press “Start/Pause/Cancel” button. The display shows the time remaining for the program to complete if time delay is not set. The display shows the time remaining for the program to start if the time delay is set. 6. Check if the Door Locked Symbol lights up on the screen. The Door Locked Symbol will light up if time delay is not set. The Door Locked Symbol will fade if time delay is set.
Canceling a program 1. Press and hold the `Start/Pause/Cancel` button for about 3 seconds; the “Start” symbol will start flashing. 2. The washer can drain all the water or can take in water for 3 times at most to cool down the clothes and complete draining process.
36 / English Front-Loading Automatic Washer Preparation Adding more laundry This is only possible under the following conditions: 1. during time delay, CAUTION C ¾¾ You may add or remove laundry during the time delay (until the program starts). 2. At the beginning of a washing cycle, CAUTION ¾¾ Washer allows adding more laundry during a future step only if the water C level is low enough to open the loading door or if the temperature in the washer is low In order to add laundry after the start-up of the program: 1. Press “Start/Pause/Cancel” button. Wait for the safety lock to open . 2. Open the loading door and put in more laundry. 3. Close the loading door. 4. Press “Start/Pause/Cancel” button. If you want to discharge the water without spinning: 1. Press “Start/Pause/Cancel” button. 2. The standby symbol fades out and the start symbol lights up. 3. The program continues and only pumps out the water.
Owner’s Guide & Installation Instructions 37 / English Preparation Re-spinning the laundry The control system for an unbalanced load can pause the spinning in cases when the distribution of the laundry in the drum is not balanced. If you want to re-spin the clothes: 1. Rearrange the previously placed clothes in the drum. 2. Select the spin program. 3. Adjust the spin speed.
After the program is finished Program indicator symbols on the screen will light up after the program is finished. “End” will appear on the screen. 1. Open the loading door and remove the laundry when the door locked symbol on the display fades out. 2. Press the “On/Off” button . 3. Turn off the faucets. 4. Check the rubber door seal for any foreign objects. 5. Leave the door and dispenser drawer open to dry.
38 / English Front-Loading Automatic Washer 7 User maintenance instructions
WARNING A ¾¾ Be sure to unplug the power cable before attempting maintenance or cleaning of your appliance to minimize the risk of electric shock.
Cleaning detergent dispenser Remove any powder/liquid residue buildup in the dispenser drawer. To do this;
1. Press the dotted point on the siphon of the softener compartment and pull towards yourself until the it is removed from the dispenser. CAUTION C ¾¾ If more than a normal amount of water and softener/bleach mixture starts to gather in the dispenser compartments, dispenser must be cleaned. 2. Wash the dispenser drawer, liquid chlorine bleach container and siphon of softener under running warm water in a sink etc. Wear protective gloves or use an appropriate brush or sponge to avoid touching the detergent residues in the drawer when cleaning. 3. Replace the drawer into its housing after cleaning. Check if the siphon and container are in their original locations. Cleaning the door seal Be sure to check the rubber door seal after unloading your washer. Pull the seal back to search for any foreign objects. Residual metal objects such as pins and coins may form rust stains on rubber seal, and cause the seal to leak. Wipe the stained areas with soapy water using a damp cloth. Then wipe with a dry cloth properly. Do not use an abrasive scrubbing agent when cleaning rubber seal.
Cleaning the drum Check the wash drum for any foreign objects after unloading your washer. Residual metal objects such as pins and coins may form rust stains on drum surface and your clothes. Do not use abrasive
Owner’s Guide & Installation Instructions 39 / English User maintenance instructions
materials while cleaning the inner surface of the drum. Use soapy water with a damp cloth to wipe the inner surface, then dry it and leave the door open to let inside dry properly.
Sanitary cycle with extra rinse option should be used for monthly cleaning of drum. To carry out this procedure: First be sure that the drum is empty. Add 80ml of liquid chlorine bleach to the bleach container in the right compartment of the dispenser. Select sanitary cycle, close the door and press “start/pause” button. At the completion of cycle, leave the door open for drying of drum interior. Monthly cleaning of the washer is necessary for removal of bacteria and mold residues and prevention of unwanted odor in wash drum.
Cleaning the outer cabinet and control panel When necessary: • Wipe the exterior panels of your washer with soapy water or mild detergent. Dry it with a soft cloth. • Use only a soft and damp cloth to clean the control panel. CAUTION C ¾¾ Never use a sponge or scrubbing material. These will damage the painted and plastic parts.
Cleaning the water inlet strainers There is a strainer at the end of each water inlet valve at the back side of the washer and also at the end of each water inlet hose where they are connected to the faucets. These strainers prevent the foreign substances and dirt in the water to enter into the washer. Strainers should be cleaned from time to time. • Close the water faucets. • Remove the nuts of the water inlet hoses to clean the surfaces of the strainers on the water inlet valves with an appropriate brush.
• If the strainers are very dirty, you can pull them out by means of pliers and clean them. • Take out the strainers on the flat ends of the water inlet hoses together with the rubber seals and clean thoroughly under running water. • Replace the rubber seals and strainers carefully and tighten the hose nuts by hand.
40 / English Front-Loading Automatic Washer User maintenance instructions Cleaning the drain pump filter Filter system in your washer prevents solid items such as buttons, coins and fabric fibers clogging the pump impeller during discharging of the washing water. Thus, a good water discharge is achieved and the pump life is extended. • If your washer fails to drain the water, the pump filter may be clogged. You may have to clean it occasionally to prevent any clogging. Water must be drained completely to clean the pump filter. In addition, water may have to be drained off completely in the following cases: • before transporting the appliance (e.g. when moving ) • when there is a danger of frost In order to clean the dirty filter and discharge the water; 1- Disconnect or unplug the washer from the power supply. WARNING ¾¾ There may be water at 158F (70°C) in the drum. Therefore, the filter must A be cleaned only after the inside water is cooled down to avoid hazard of scalding. 2- Open the filter cap. The filter cap may be composed of one or two pieces according to the model of your washer. If it is composed of two pieces, press the tab on the filter cap downwards and pull the piece out towards yourself.
If it is composed of one piece, hold it from both sides and open it by pulling out.
3- An emergency drain hose is supplied with your washer.
Owner’s Guide & Installation Instructions 41 / English User maintenance instructions
Do the following as shown in the figure below: • Pull out the emergency drain hose from its housing.
• Place a large container at the end of the hose. Drain the water off into the container by pulling out the plug at the end of the hose. If the amount of water to be drained off is greater than the volume of the container, replace the plug, pour the water out, then resume the draining process. • After draining process is completed, replace the plug into the end of the hose and fit the hose back into its place. • When there is no water left, turn the pump filter until it is completely loose and remove it. • Clean any residues inside the filter as well as fibers, if any, around the impeller region. • Never force the filter while replacing it into its housing. Fit the filter fully into its housing; otherwise, water may leak from the filter cap. 4- Close the filter cap. Close the two-piece filter cap of your product by pushing the tab on it. Close the one-piece filter cap of your product by fitting the tabs on the bottom into their positions and pushing the upper part of it.
Descaling the washer Hard water can cause scale build-up inside the drum and other parts of your washer in time. Scaling may lead to some serious problems such as clogging in hoses, heater or pump failure eventually. To prevent scaling, wash drum should be cleaned frequently. Do not use abrasive materials such as metal wool while cleaning the drum. Take the manufacturer’s instructions into account if you are using a descaling agent. Descaling agents may contain materials that are hazardous for washer components. Use descaling agents compatible for use in clothes washers. When using a powder descaling agent, add 1 cup to the main wash compartment of the dispenser and run a regular hot cycle (with extra rinse) without any clothes and detergents.
42 / English Front-Loading Automatic Washer 8 Troubleshooting
Problem Cause Explanation / Suggestion
There may be some water in your It is not harmful to your washer. You appliance when you receive it. This should run a “sanitary” cycle without Water in the washer. is from the quality control process any clothes and laundry additives and is normal. before the first use of your washer.
Faucets may be turned off. Open the water faucets fully.
Check the water inlet hose and Water inlet hose may be folded. straighten if necessary.
Water inlet strainers might be clogged. Clean the water inlet strainers.
Call an electrician and have the power Is there power at the outlet? outlet / circuit breaker / fuse checked.
Washer does not fill with Plug the power cord to a live electrical water or wash after the Washer might be unplugged. outlet. program was selected and the “Start/Pause/Cancel” button was pressed. Check the drain hose and straighten if Drain hose may be folded. necessary.
Washer may be in handwash, wools Wait for a short time and tumbling will or soak cycle. start.
Clean the drain pump filter (See “User Drain pump filter or drain itself may maintenance instructions” ). If the be clogged. house drain pipes are clogged, call a plumber for assistance.
Door may not be closed properly. Close the loading door.
Drain hose may be folded. Check the drain hose and straighten if necessary. Washer does not drain water / Washer drains Clean the drain pump filter (See “User water slowly. Drain pump filter or drain itself may maintenance instructions” ). If the be clogged. house drain pipes are clogged, call a plumber for assistance.
The water being taken in is Connect the drain hose as described directly discharged. Improper position of the drain hose. in the user manual (See “Installation Instructions, Drainage”).
No water can be seen in This is not a problem. The water the drum during washing. level is not visible from the outside of the washer.
Washer stopped shortly after the program cycle Washer can stop temporarily due to It will resume operating when the started. low voltage. voltage is back to the normal level.
Owner’s Guide & Installation Instructions 43 / English Troubleshooting
Be sure the strainers and rubber seals Inlet hose connections may be of the water inlet hoses are solid and leaking. securely fitted.
Tightly attach the drain hose to the End of the drain hose may be loosely waste pipe or sink (See “Installation inserted into the waste pipe or sink. Instructions, Drainage”). There is water coming from the bottom of the House drain may be clogged. If the house drain pipes are clogged, call washer. a plumber for assistance.
Filter cap of the drain pump may not Make sure that the pump filter cap is be properly fitted. tightly closed.
Internal hose connections (e.g. Hose connections inside the washer dispenser hoses, drain system) should may be leaking. be checked by a service technician.
Washer fills with water There may be hot water inside For safety reasons, water should be when a process is washer. cycled in and out a couple times. cancelled.
Time delay function does not work. Door may not be closed properly. Close the loading door.
Water level might be above the Run “Drain” , “Spin” or “Drain&Spin” lower level of the door. program.
Washer might be heating up the water or it may be at the spinning Wait until the process is over. cycle.
Due to electrical safety mechanism, The door will not open. the door can only be opened a few minutes after the program has Wait until the process is over. stopped.
If the door can not be opened after minimum ten minutes the program In this situation, call the qualified has stopped , on/off buton should be service technician. placed to off position.
Door is not properly closed/Door The door will not lock/ Push the loading door firmly shut until door expression is on LCD hinge is not aligned with lock switch. you hear it lock into space
44 / English Front-Loading Automatic Washer Troubleshooting
The washer will wait until there is a sufficient amount of water, which may Water pressure may be low. lengthen the cycle time to avoid poor washing results due to insufficient water.
Cycle time is lengthened to avoid Supply voltage may be low. poor washing results when the supply voltage is low.
Cycle time lengthens to heat up the Inlet temperature of water may be water when the inlet water is cold. Also, Cycle time takes longer low. washing time can be lengthened to than the time specified in avoid poor washing results. the owner’s guide.
The automatic spin correction system There may be an imbalance of load might have been activated due to the in the drum. unbalanced distribution of the laundry in the drum.
Use a proper amount of HE detergent. Number of rinse cycles might have Reduce the amount of detergent next increased to obtain a better rinse. time you operate the washer.
In the case of a paused countdown while taking in water: Timer will not countdown until the washer is filled The washer will wait until there is a with the correct amount of water. sufficient amount of water to avoid poor Time will not count down until washing results due to lack of water. the selected temperature for the Then the timer will start to count down. program is reached
In the case of a paused countdown at the heating step: Time will not count down until the selected temperature for the program cycle is reached. It continuously washes. Remaining time does not count down. The automatic spin correction system might have been activated due to the unbalanced distribution of the laundry in the drum.
In the case of a paused countdown The laundry in the drum may be tangled at the spinning step: There may up too much. Laundry should be be an imbalance of laundry in the rearranged and re-spun. drum.
No spinning is performed when the laundry is not evenly distributed in the drum to prevent any damage to the appliance and to its environment.
Owner’s Guide & Installation Instructions 45 / English Troubleshooting
The automatic spin correction system might have been activated due to the unbalanced distribution of the laundry in the drum.
It continuously spins. The laundry in the drum may be tangled There may be an imbalance of load up too much. Laundry should be Remaining time does not in the drum. count down. rearranged and re-spun.
No spinning is performed when the laundry is not evenly distributed in the drum to prevent any damage to the appliance and to its environment.
Use the recommended amount of Using excessive amount of HE detergent appropriate for water detergent. hardness, soil level and amount of laundry.
Not using HE detergent Use HE detergent. Excess foaming occurs. Detergent may have been stored improperly. Store detergent in a cool and dry place.
Type of material being washed (lace Reduce the amount of detergent for lace items will cause excessive foam due items. to their meshed structure).
Push “Start/Pause/Cancel” button. Washer is completely Mix 2 cups of water with 1-2 full of suds/Suds coming Not using HE detergent / Using tablespoon of fabric softener and out of dispenser during excessive amount of detergent pour it into detergent dispenser. Push “ S t a r t / P a u s e / C a n c e l ” b u t t o n a g a i n . operation. Use proper amount of HE detergent next time you operate the washer.
Do not unload the washer. Operate a quick wash cycle (e.g. Delicates, Load is still too soapy / Wools) without any detergent. Add Washer is full of suds at Not using HE detergent / Using 1-2 tablespoon of fabric softener into the end of program. excessive amount of detergent main wash compartment of detergent dispenser during water intake. Use proper amount of HE detergent next time you operate the washer.
Unbalance detection due to 1-2 Add more laundry (e.g. a few additional small items in the drum (uneven towels) to the drum and start a “Spin” load distribution) or “Spin&Drain” cycle. Load is still too wet at the end of program. Poor spinning results due to not using HE detergent / using Use proper amount of HE detergent. excessive amount of detergent
46 / English Front-Loading Automatic Washer Troubleshooting
The automatic spin correction system might have been activated due to the unbalanced distribution of the laundry in the drum. No spinning is performed There may be an imbalance of load when the laundry is not evenly in the drum. Therefore, the program distributed in the drum to prevent any cycle might have been completed damage to the appliance and to its without spinning. environment.
The laundry in the drum may be tangled up too much. Laundry should be rearranged and re-spun.
Washer did not spin. Unbalance detection due to 1-2 Add more laundry (e.g. a few additional small items in the drum (uneven towels) to the drum and start a “Spin” load distribution) or “Spin&Drain” cycle.
Check the drain hose and straighten if Drain hose may be folded. necessary.
“No spin” setting may be adjusted. See “Spin Speed Selection”.
Clean the drain pump filter (See “User Drain pump filter or drain itself may maintenance instructions” ). If the be clogged. house drain pipes are clogged, call a plumber for assistance.
Use the recommended amount of Using insufficient amount of HE detergent appropriate for water detergent. hardness and soil level of laundry.
Washing at low temperatures for a Select the proper temperature for the laundry to be washed (See “Laundry long time Tips” & “Program Cycle Selection”).
Using insufficient amount of If the water hardness is high, using an detergent for hard water (soil can insufficient amount of detergent can stick to the laundry) cause laundry to turn gray over time.
Using excessive amount of Washing performance is It is difficult to eliminate such grayness poor: Laundry turns gray/ detergent (detergent can stick to the once it occurs. yellow laundry).
Not using HE detergent Use HE detergent.
Sort the wash load by color (See Dyeing problem occurs. “Laundry Tips”).
Hot water inlet temperature is not Set your water heater for delivering high enough. 120-140F (48-60 C) hot water.
Select the proper program cycle and A higher temperature might have temperature according to the type and been selected. soiling degree of the laundry.
Owner’s Guide & Installation Instructions 47 / English Troubleshooting
Select the proper program cycle Wrong program cycle and and temperature for the laundry to temperature might have been be washed (See “Laundry Tips” & selected. “Program Cycle Selection”).
Use the recommended amount of Using insufficient amount of HE detergent appropriate for water detergent. hardness and soil level of laundry.
Use liquid detergent for cold wash cycle for good wash results. Use proper Washing performance is Using wrong type of detergent. detergents recommended for wools, poor: Stain could not be handwashable and delicate items. removed, not cleaned. Laundry could not be whitened. Sort the laundry according to care Mixing different sorts of items. labels and user manual (See “Laundry Tips”).
Put the detergent in the correct compartment of dispenser (See Mixing different types of laundry “Detergent Dispenser”). additives. Do not mix detergent with bleaching agent or fabric softener.
Excessive laundry may be loaded into washer. Do not load the washer in excess.
Oily accumulations of prior wash cycles on the drum may have stuck Washer must be operated empty at to the laundry. sanitary cycle with detergent. Washing performance is poor: Oily stains appear on laundry. The detergent may have been placed into the wrong compartment; the Softener should not come into contact detergent may be mixed with the with detergent when being added. softener.
Such odor and bacteria layer may be formed on the drum as a result of continuous washing at lower temperatures and/or in short programs. Leave the dispenser drawer as well as the loading door ajar after each washing. Thus, a humid environment favorable for bacteria cannot be created Bad odor in the drum and inside the machine. detergent dispenser. For monthly cleaning procedure of the drum, See “Cleaning the Drum”.
Wash and clean the dispenser with warm water frequently (See “Cleaning Detergent Dispenser”).
48 / English Front-Loading Automatic Washer Troubleshooting
If the water hardness is higher, using insufficient amount of detergent can Using insufficient amount of cause the laundry to become stiff detergent. in time. Use appropriate amount of detergent according to the water hardness.
You may have added too much softener beyond max fill line.
Clothes are stiff and/or do The detergent dispenser might be not smell like the fabric Softener being released early. problematic. Water may be siphoned softener. (pulling the softener into the washer early) during the fill or rinse cycles.
There might be problems with the water inlet valves.
The detergent may have been placed Softener should not come into contact into the wrong compartment; the with detergent / bleach when being detergent may be mixed with the added. softener.
Select the proper program and temperature according to the type A higher temperature might have and soiling degree of the laundry (See been selected. “Laundry Tips” & “Program Cycle Selection”).
Do not pour undiluted liquid bleach onto laundry. Always pour it into bleach Color of the clothes faded. compartment of the dispenser prior to Exposure of laundry to undiluted beginning of the wash cycle . liquid chlorine bleach.
Do not overfill the bleach compartment. Fill up to max line at the most.
Excessive laundry might have been loaded in. Do not load the washer in excess.
Owner’s Guide & Installation Instructions 49 / English Troubleshooting
There may be an imbalance of laundry in the machine. The laundry in the drum may be tangled up too much. Laundry should be rearranged and re-spun. No Intermediate spins may be skipped. spinning is performed when the laundry is not evenly distributed in the drum to prevent any damage to the appliance and to its environment.
The amount and storage conditions Store detergents in a cool and dry of the detergent used might not be place. Do not keep them under high appropriate. temperatures. Rinsing performance is poor. Not using HE detergent Use HE detergent.
Using excessive amount of detergent Reduce the amount of detergent.
Check the drain hose and straighten if Drain hose may be folded. necessary.
Clean the drain pump filter (See “User Drain pump filter or drain itself may maintenance instructions” ). If the be clogged. house drain pipes are clogged, call a plumber for assistance.
Detergent (powder) may have been Dry the dispenser drawer before putting put in wet dispenser drawer. in powder detergent.
Store detergent in a cool and dry Detergent (powder) may have gotten place. Do not keep them under high damp. temperatures. Detergent or softener residue in the dispenser/ Softener may be too dense or Dilute the softener by pouring some Too much water remains in concentrated. warm water on it (dilute up to max fill the softener compartment. line).
Water pressure might be low.
Detergent might be mixed with the Softener/bleach should not come into bleach/softener. contact with detergent when being added.
50 / English Front-Loading Automatic Washer Troubleshooting
Adjust the washer feet (See “Levelling Feet might require adjustment. the Washer”).
Shipping bolts might not have been Remove the shipping bolts (See removed. “Removing Transport/Shipping Bolts”).
Add more laundry to the drum for even There may be a small amount of load distribution next time you operate Washer vibrates, shakes or laundry in the drum. makes too much noise. the washer.
Reduce the amount of laundry in the The drum may be overloaded or the drum or balance the load by hand next clothes may be distributed unevenly. time you operate the washer.
The appliance might be touching a solid surface. Ensure that nothing touches the washer.
This is not a problem. Lapping Strange noise in the drain sound is normal at the end of the It is not harmful to your washer. pump. drain operation.
Stop the program cycle (See “Cancelling Clanking noise in the Metal objects such as coins, pins a Program”) ,check the drum for any drum. may be in the drum. foreign objects.
Disconnect inlet hoses from the valves. Water inlet hoses or valves may be Clean inlet strainers and valve filters of clogged. any debris.
Run the hot water faucets in the Water fill temperature is There may be a long distance between the water heater and bathroom or kitchen (whichever is close incorrect. to the location of your washer) for a washer. short time to purge the hot water line.
There may be a problem with water Be sure that your water heater is heater. delivering hot water min 120F (49C) at the faucet.
Owner’s Guide & Installation Instructions 51 / English Troubleshooting
Excessive laundry might have been loaded in. Do not load the washer in excess.
Select the proper program cycle Wrong program cycle and and temperature for the laundry to temperature might have been be washed (See “Laundry Tips” & selected. “Program Cycle Selection”).
Use the recommended amount of Using insufficient amount of HE detergent appropriate for water Detergent residue left on detergent. hardness and soil level of laundry. the laundry.
Using powder or granular detergents Try to use a liquid detergent when in cold water washing may leave washing in cold water. residue on wash load.
Use liquid detergent for cold wash cycle for good wash results. Use proper Using wrong type of detergent. detergents recommended for wools, handwashable and delicate items.
Excessive laundry might have been Do not load the washer in excess. Clothes get tangled up too loaded in. much in the drum when washing. Washing many items of the same Load the wash drum with items of type or size of clothes together. different sizes.
Unload the washer as soon as the wash Delay in unloading the washer. cycle ends.
Wrong program cycle might have Select the proper program cycle for the Load is wrinkled. been selected. laundry to be washed (See “Laundry Tips” & “Program Cycle Selection”).
Excessive laundry might have been loaded in. Do not load the washer in excess.
The plug might not be plugged in the mains outlet. Check the plug.
Fuse may have blown. Check the fuse / circuit breaker. Washer does work. Nothing is displayed on the screen. Power may be cut off. Check the supply power.
The “On/Off” button might not have been pressed. Press this button.
You can restart your machine by pressing Water Cut off symbol on LCD Water may have been cut off. the “Start/Pause/Cancel” button for a is light up short time after ensuring that the water is not cut off.
52 / English Front-Loading Automatic Washer 9 WARRANTY STATEMENT FOR THE BLOMBERG CLOTHES WASHERS
The warranties provided by Blomberg in these statements only apply to Blomberg washers sold to the original purchaser or homeowner in the US and Canada. The warranty is not transferable. To obtain warranty service, please contact our nearest distributor as listed by state. You will need your washer model number, serial number, retailer name and address, where purchased and purchase date / installation date. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
1 year * limited warranty from date of first installation Blomberg will repair or replace at no cost to the consumer any defective parts of the washer if used under normal household conditions (warranty is void if the product is used commercially e.g., bed + breakfast, nursing home etc.). Service must also be performed by an authorized Blomberg service agency. (Cosmetic defects must be reported within 10 business days from installation)
2 year * ++ limited warranty from date of first installation (Parts only) Blomberg will repair or replace any parts at no cost to the consumer if material defects or workmanship have caused the damage or failure of these components. Again the appliance must have been used under normal household conditions and not commercially as stated above (Labor charges are the responsibility of the consumer)
5 year * ++ limited warranty from date of first installation (parts only 2-5 years) Blomberg will repair or replace any circuit boards or washer drum (excluding any plastic attachments) at no cost to the consumer if material defects or workmanship have caused the damage or failure of these components. The washer must have been used under normal household conditions and not commercially (Labor charges are the responsibility of the consumer)
Lifetime limited warranty from date of first installation * ++ (parts only) Blomberg will repair or replace to the original owner the stainless steel drum if rust through occurs under normal household use and normal water conditions (no excessive chlorine). Blomberg may, at its option, also replace the whole washer with the same and/or equivalent model with equal or better functionality if the original model is no longer available. (Labor, removal and installation charges are the responsibility of the consumer.)
Disclaimers of warranties and exclusions: Warranty does not cover service costs by an authorized service agent to correct installation, electrical and plumbing problems or educational instruction on the use of the washer. The warranty also does not cover defects or damage caused by an act of god (such as storms, floods, fires, mudslides, etc.), damage cause by use of the washer for purposes other than those for which it was designed, misuse, abuse, accident, alteration, improper installation, maintenance, travel fees, service calls outside normal service hours, unauthorized service work or work.
This product is fully tested and went through official quality assurance inspections before leaving the original manufacturing site. Warranty terms for this Blomberg household appliance is not valid if the product is altered, tampered, modifed, additional parts assembled, fixed and re-packed by an authorized distributor, servicer, a third party retailer, reseller or by any other unauthorized person(s)”
TO THE EXTENT PERMITTED BY LAW, THIS WARRANTY IS IN LIEU OF ALL OTHER EXPRESSED AND IMPLIED WARRANTIES, INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. BLOMBERG UNDERTAKES NO RESPONSIBILITY FOR THE QUALITY OF THIS PRODUCT EXCEPT AS OTHERWISE PROVIDED IN THIS WARRANTY STATEMENT. BLOMBERG ASSUMES NO RESPONSIBILITY THAT THE PRODUCT WILL BE FIT FOR ANY PARTICULAR PURPOSE FOR WHICH YOU MAY BE BUYING THIS PRODUCT, EXCEPT AS OTHERWISE PROVIDED IN THIS WARRANTY STATEMENT. Blomberg does not assume any responsibility for incidental or consequential damages. Such damages include, but are not limited to, loss of profits, loss of savings or revenue, loss of use of the washer or any associated equipment, cost of capital, cost of any substitute equipment, facilities or services, downtime, the claims of third parties, and injury to property. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitations or exclusion may not apply to you. * installation date shall refer to either purchase date or 5 business days after delivery of the product to the home, whichever is later. ++Parts replaced will assume the identity of the original parts + their original warranty. No Other Warranties. This Warranty Statement is the complete and exclusive warranty from the manufacturer. No employee of Blomberg or any other party is authorized to make any warranty in addition to those made in this Warranty Statement. However, Arcelik should also make sure that its warranty which is given to consumers makes it clear that the warranty does not cover any modifications or additions to the product made by the distributor or anyone else. It covers only the product as delivered by Arcelik to the distributor, and any modification or addition by the distributor or anyone else voids the warranty.
Owner’s Guide & Installation Instructions 53 / English 10 HOW TO GET SERVICE
Please contact the Distributor for your State or Province as listed on the Distributor Contact List, or call our Toll Free Number at 1 800 459 9848 for direction to an Authorized Blomberg Service Agent.
54 / English Front-Loading Automatic Washer Owner’s Guide & Installation Instructions 55 / English www.blomberginternational.com [email protected]
Document Number : 17-0 1 17-02-1 282822820523340