DOCSLIB.ORG

Care Label Recommendations

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Care Label Recommendations CARE LABEL RECOMMENDATIONS RECOMMENDED CARE FOR APPAREL PRODUCTS Fiber content, fabric construction, color, product construction, finish applications and end use are all considered when determining recommended care. Following are recommended care instructions for Nordstrom Products, however; the product must be tested to confirm that the care label is suitable. GARMENT/ CONSTRUCTION/ FIBER CONTENT FABRICATION CARE LABEL Care ABREVIATION EMBELLISHMENTS Knits and Sweaters Acetate/Acetate Blends Knits / Sweaters K & S Dry Clean Only DCO Acrylic Sweater K & S Machine Wash Cold, Gentle Cycle With Like Colors Only Non-Chlorine Bleach If Needed MWC GC WLC ONCBIN TDL RP CIIN Tumble Dry Low, Remove Promptly Cool Iron If Needed Acrylic Gentle Or Open Construction, Chenille K & S Turn Garment Inside Out Or Loosely Knit Machine Wash Cold, Gentle Cycle With Like Colors TGIO MWC GC WLC ONCBIN R LFTD CIIN Only Non-Chlorine Bleach If Needed Reshape, Lay Flat To Dry Cool Iron If Needed Acrylic / Rayon Blends Sweaters / Gentle Or Open K & S Professionally Dry Clean Construction, Chenille Or Loosely Knit Short Cycle, No Steam PDC SC NS Acrylic / Wool Blends Sweaters with Embelishments K & S Hand Wash Cold, Separately Only Non-Chlorine Bleach If Needed, No Wring Or Twist Reshape, Lay Flat To Dry Cool Iron If Needed HWC S ONCBIN NWOT R LFTD CIIN DNID Do Not Iron Decoration Acrylic / Wool Blends Sweaters K & S Hand Wash Cold, Separately Only Non-Chlorine Bleach If Needed Roll In Towel To Remove Excess Moisture Reshape, Lay Flat To Dry HWC S ONCBIN RITTREM R LFTD CIIN Cool Iron If Needed Azlon, Azlon from Soybean Knits K & S Machine Wash Cold, Gentle Cycle With Like Colors Only Non-Chlorine Bleach If Needed Hang To Dry MWC GC WLC ONCBIN HTD CIIN Cool Iron if Needed Cotton / Polyester/ Spandex Knit Swim Wear K & S Machine Wash Cold, Gentle Cycle With Like Colors Only Non-Chlorine Bleach If Needed Line Dry, Do Not Iron MWC GC WLC ONCBIN LD DNI RTAUICP Rinse Thoroughly After Use In Chlorinated Pools 1 CARE LABEL RECOMMENDATIONS GARMENT/ CONSTRUCTION/ FIBER CONTENT FABRICATION CARE LABEL Care ABREVIATION EMBELLISHMENTS Cotton And Blends Fine Knit Jacquard K & S Machine Wash Cold, Gentle Cycle With Like Colors Only Non-Chlorine Bleach If Needed Hang To Dry MWC GC WLC ONCBIN HTD WIIN Warm Iron if Needed Cotton And Blends Fine Gauge Knit/ Sweaters, Pigment K & S Machine Wash Cold, Separately Dyed/Printed Only Non-Chlorine Bleach If Needed Tumble Dry Low Warm Iron If Needed MWC S ONCBIN TDL WIIN Cotton And Blends Hosiery K & S Machine Wash Warm With Like Colors MWW WLC ONCBIN TDL Ony Non-Chlorine Bleach If Needed Tumble Dry Low Cotton And Blends Fine Gauge Knit/ Sweaters K & S Machine Wash Cold With Like Colors Only Non-Chlorine Bleach If Needed Tumble Dry Low, Remove Promptly MWC WLC ONCBIN TDL RP WIIN Warm Iron If Needed Cotton And Blends Screen Print K & S Turn Garment Inside Out Machine Wash Cold, Gentle Cycle With Like Colors Only Non-Chlorine Bleach If Needed TGIO MWC GC WLC ONCBIN TDL WIIN DNID Tumble Dry Low Warm Iron if Needed Do Not Iron Decoration Cotton And Blends Fine Gauge Knit, Included Fine Gauge K & S Machine Wash Warm Socks, Underwear, Under Shirts, With Like Colors Only Non-Chlorine Bleach If Needed Tumble Dry Low MWW WLC ONCBIN TDL WIIN Warm Iron If Needed Cotton, Cotton Blends With Knits / Sweaters K &S Machine Wash Cold Spandex /Nylon With Like Colors Only Non-Chlorine Bleach If Needed Tumble Dry Low, Remove Promptly MWC WLC ONCBIN TDL RP CIIN Cool Iron If Needed Cotton,Cotton Blends, Ramie, Sweaters, Heavy Gauge with K & S Hand Wash Cold, Separately Ramie Blends embelishment Only Non-Chlorine If Needed Roll In Towel To Remove Excess Moisture HWC S ONCBIN RITTREM R LFTD CIIN Reshape, Lay Flat To Dry Cool Iron If Needed 2 CARE LABEL RECOMMENDATIONS GARMENT/ CONSTRUCTION/ FIBER CONTENT FABRICATION CARE LABEL Care ABREVIATION EMBELLISHMENTS Cotton,Cotton Blends, Ramie, Sweaters, Heavy Gauge K & S Turn Garment Inside Out Ramie Blends Machine Wash Cold, Gentle Cycle With Like Colors Only Non-Chlorine Bleach If Needed Reshape, Lay Flat To Dry TGIO MWC GC WLC ONCBIN R LFTD WIIN Warm Iron If Needed Cotton/Rayon Polyester/ Stretch Knits Velvet/Velour K & S Machine Wash Cold Spandex Blends With Like Colors Only Non-Chlorine Bleach If Needed MWC WLC ONCBIN TDL RP WIWSOIN Tumble Dry Low , Remove Promptly Warm Iron Wrong Side Out If Needed Linen Knits/ Sweaters K & S Dry Clean Only DCO Linen Knits / Sweaters K & S Machine Wash Cold, Gentle Cycle Washable With Like Colors Only Non-Chlorine Bleach If Needed MWC GC WLC ONCBIN TDL RP WIIN Tumble Dry Low, Remove Promptly Warm Iron If Needed Lyocell, Tencel® Lyocell, Knits K & S Machine Wash Cold, Gentle Cycle Seacell® Lyocell With Like Colors Only Non-Chlorine Bleach If Needed MWC GC WLC ONCBIN TDL RP CIIN Tumble Dry Low, Remove Promptly Cool Iron If Needed Modal, Modal Blends Knits with Embelishments K & S Hand Wash Cold With Like Colors Only Non-Chlorine Bleach If Needed HWC WLC ONCBIN RITTREM R LFTD CIIN Roll In Towel To Remove Excess Moisture Reshape, Lay Flat To Dry Cool Iron If Needed Modal, Modal Blends Knits K & S Machine Wash Cold, Gentle Cycle With like colors Only Non-Chlorine Bleach If Needed MWC GC WLC ONCBIN R LFTD CIIN Reshape, Lay Flat To Dry Cool Iron If Needed Modal, Modal Blends Mesh Knit K & S Machine Wash Cold, Gentle Cycle With Like Colors Only Non-Chlorine Bleach If Needed MWC GC WLC ONCBIN TDL RP CIIN Tumble Dry Low, Remove Promptly Cool Iron if needed Nylon Hosiery K & S Hand Wash Cold With Like Colors Only Non-Chlorine Bleach If Needed HWC WLC ONCBIN HTD Hang To Dry Nylon, Nylon Spandex bleands Bras, Cami with Molded cup bras, K &S Hand Wash Cold Lingerie with fancy lace With Like Colors embellishments Do Not Bleach HWC WLC DNB HTD DNI Hang To Dry Do Not Iron 3 CARE LABEL RECOMMENDATIONS GARMENT/ CONSTRUCTION/ FIBER CONTENT FABRICATION CARE LABEL Care ABREVIATION EMBELLISHMENTS Nylon, Sorbtek® Nylon Knits, wicking properties K & S Machine Wash Cold With Like Colors Only Non-Chlorine Bleach If Needed MWC WLC ONCBIN TDL DNI DNUFSODS Tumble Dry Low , Do not Iron DNDC Do not Use Fabric Softeners or Dryer Sheets, Do not Dry Clean Polyester, Polyester Blends Knit K & S Machine Wash Cold With Like Colors Only Non-Chlorine Bleach If Needed Tumble Dry Low, Remove Promptly MWC WLC ONCBIN TDL RP WIIN Warm Iron If Needed Polyester, Polyester Blends Knit K & S Machine Wash Warm (kids sleepwear) With Like Colors Ony Non-Chlorine Bleach If Needed MWW WLC ONCBIN TDL CIIN TRFRUDO Tumble Dry Low DNUS Cool Iron If Needed To Retain Flame Resistance Use Detergent Only Do Not Use Soap Rayon, Rayon Blends Gentle Or Open Construction, Chenille K & S Hand Wash Cold Or Loosely Knit With Like Colors Only Non-Chlorine If Needed HWC WLC ONCBIN RITTREM R LFTD CIIN Roll In Towel To Remove Excess Moisture Reshape, Lay Flat To Dry Cool Iron If Needed Rayon, Rayon Blends Knit / Sweater K &S Professionally Dry Clean, Short Cycle, No Steam PDC SC NS Silk, Silk Blends Knits / Sweaters K & S Professionally Dry Clean, No Steam PDC NS Wool Knits / Sweaters K & S Machine Wash Cold Washable Mild Detergent Do Not Bleach MWC MD DNB R LFTD WIIN ODC Reshape, Lay Flat To Dry Warm Iron If Needed Or Dry Clean Wool/Cashmere Knits/Sweaters K & S Dry Clean Only DCO Wool/Cashmere Sweaters Washable K&S Hand Wash Cold, Separately Mild Detergent Do Not Bleach HWC S MD DNB R LFTD CIIN Reshape, Lay Flat To Dry Cool Iron If Needed 4 CARE LABEL RECOMMENDATIONS GARMENT/ CONSTRUCTION/ FIBER CONTENT FABRICATION CARE LABEL Care ABREVIATION EMBELLISHMENTS Leather & Suede Leather/Suede Coats, Jackets, Vests, Pants, Skirts L Professionally Leather Clean PLC Leather / Suede / Wool Knits, Sweaters, With Leather/Suede L Professionally Leather Clean Wool Knit Blends PLC Wovens AcetateTriacetate Structured Suiting, Jackets, Dresses, W Dry Clean Only Acetate Blends Pants, Blouses, Linings Triacetate Blends Silk Wool DCO Wool Blends, Polyester/Wool/ Spandex Blends Rayon Viscose Modal Cotton Nano/stain release Treated fabrics W Machine Wash Warm With Like Colors Only Non-Chlorine Bleach If Needed MWW WLC ONCBIN TDM RP WIIN Tumble Dry Medium, Remove Promptly DNUFSODS DNDC Warm Iron If Needed Do Not Use Fabric Softeners Or Dryer Sheets Do Not Dry Clean Cotton Velour /Terry Robes W Machine Wash Cold With Like Colors Only Non-Chlorine Bleach If Needed MWC WLC ONCBIN TDL RP WIIN DNUFSODS Tumble Dry Low, Remove Promptly Warm Iron If Needed Do Not Use Fabric Softeners or Dryer Sheets Cotton Rayon Silk Acetate Crushed Velvet W Professionally Dry Clean, No Steam PDC NS Rayon Blends Cotton Rayon Silk Velvet, Velour W Professionally Dry Clean, Steam Only, Do Not Press PDC SO DNP Cotton/Cotton Blends Over Dyed Denim, Pigment Dyed, W Machine Wash Cold Pigmented Printed Separately Madras Only Non-Chlorine Bleach If Needed MWC S ONCBIN TDL WIIN Tumble Dry Low Warm Iron If Needed Cotton/Cotton Blends Corduroy W Machine Wash Cold With Like Colors Only Non-Chlorine Bleach If Needed MWC WLC ONCBIN TDL RP WIWSOIN Tumble Dry Low, Remove Promptly Warm Iron Wrong Side Out If Needed Cotton/Cotton Blends Wrinkle Resistant W Machine Wash Warm With Like Colors Only Non-Chlorine Bleach If Needed MWW WLC ONCBIN TDL RP WIIN Tumble Dry Low, Remove Promptly Warm Iron If Needed 5 CARE LABEL RECOMMENDATIONS GARMENT/ CONSTRUCTION/ FIBER CONTENT FABRICATION CARE LABEL Care ABREVIATION EMBELLISHMENTS Cotton/Cotton Blends Washed Denim W Machine Wash Cold With Like Colors Only Non-Chlorine Bleach If Needed MWC WLC ONCBIN TDL WIIN Tumble Dry Low Warm Iron If Needed Cotton/Cotton Blends
Load more

Recommended publications
  • Choosing the Proper Short Cut Fiber for Your Nonwoven Web
    Choosing The Proper Short Cut Fiber for Your Nonwoven Web ABSTRACT You have decided that your web needs a synthetic fiber. There are three important factors that have to be considered: generic type, diameter, and length. In order to make the right choice, it is important to know the chemical and physical characteristics of the numerous man-made fibers, and to understand what is meant by terms such as denier and denier per filament (dpf). PROPERTIES Denier Denier is a property that varies depending on the fiber type. It is defined as the weight in grams of 9,000 meters of fiber. The current standard of denier is 0.05 grams per 450 meters. Yarn is usually made up of numerous filaments. The denier of the yarn divided by its number of filaments is the denier per filament (dpf). Thus, denier per filament is a method of expressing the diameter of a fiber. Obviously, the smaller the denier per filament, the more filaments there are in the yarn. If a fairly closed, tight web is desired, then lower dpf fibers (1.5 or 3.0) are preferred. On the other hand, if high porosity is desired in the web, a larger dpf fiber - perhaps 6.0 or 12.0 - should be chosen. Here are the formulas for converting denier into microns, mils, or decitex: Diameter in microns = 11.89 x (denier / density in grams per milliliter)½ Diameter in mils = diameter in microns x .03937 Decitex = denier x 1.1 The following chart may be helpful. Our stock fibers are listed along with their density and the diameter in denier, micron, mils, and decitex for each: Diameter Generic Type
    [Show full text]
  • Silk, Linen, Leather, Denim, Grass, Cotton, Felt
    Silk, linen, leather, denim, grass, cotton, felt. Natural materials keep the integrity of their shape yet hold an impression of the figure that has worn them. Fit-out for Olivia Spencer Bower speaks to the fabrics and forms that we live in. An assortment of garment patterns, building plans and the lifestyles of art heroines provide templates or underlying structures for Emma Fitts’ installation at the Ilam School of Fine Arts gallery. Adopting the layout of a modernist home and featuring a series of fabric hangings and clothing cutouts, Fitts’ work acutely relates to our situated knowledge, the proportions of the body and our experience of space, while also implying much less measurable qualities. Alternative histories that reveal the social relationships and values of a bygone era are incorporated to form a homage of sorts, though these references are evoked to shed light on the present–what it means to live and make work as an artist today. The gallery is physically divided by four large textile works, hung from the ceiling according to the walls shown in architectural plans for 15A Leinster Avenue, Christchurch–the former home of artist Olivia Spencer Bower (1905- 82). These soft walls enable visitors to occupy the space as though wandering through her actual house: living room, kitchen, sunroom, bedroom and studio. Designed in 1969 by architects Cowey and McGregor in the Christchurch style of neo-brutalism, the house was commissioned to accommodate the needs of a female artist living alone. There is an emphasis on form developed in relation to function and it is both refined and compact, manifesting these ideals.
    [Show full text]
  • Investigation of the Mechanical Properties of a Carbon Fibre-Reinforced Nylon Filament for 3D Printing
    machines Article Investigation of the Mechanical Properties of a Carbon Fibre-Reinforced Nylon Filament for 3D Printing Flaviana Calignano 1,* , Massimo Lorusso 2 , Ignanio Roppolo 3 and Paolo Minetola 1 1 Department of Management and Production Engineering, Politecnico di Torino, Corso Duca degli Abruzzi 24, 10129 Turin, Italy; [email protected] 2 Istituto Italiano di Tecnologia, Center for Sustainable Future Technologies IIT@Polito, Corso Trento 21, 10129 Turin, Italy; [email protected] 3 Department of Applied Science and Technology, Politecnico di Torino, Corso Duca degli Abruzzi 24, 10129 Turin, Italy; [email protected] * Correspondence: fl[email protected]; Tel.: +39-011-090-7218 Received: 19 July 2020; Accepted: 2 September 2020; Published: 4 September 2020 Abstract: Additive manufacturing (i.e., 3D printing) has rapidly developed in recent years. In the recent past, many researchers have highlighted the development of in-house filaments for fused filament fabrication (FFF), which can extend the corresponding field of application. Due to the limited mechanical properties and deficient functionality of printed polymer parts, there is a need to develop printable polymer composites that exhibit high performance. This study analyses the actual mechanical characteristics of parts fabricated with a low-cost printer from a carbon fibre-reinforced nylon filament. The results show that the obtained values differ considerably from the values presented in the datasheets of various filament suppliers. Moreover, the hardness and tensile strength are influenced by the building direction, the infill percentage, and the thermal stresses, whereas the resilience is affected only by the building direction. Furthermore, the relationship between the mechanical properties and the filling factor is not linear.
    [Show full text]
  • Care Labelling Guide
    Care Labelling Guide This chart is for guidance only and should be read in conjunction with the ACCC Care labelling for Clothing Guide which specifies the mandatory standards for care labelling based on the Australian/New Zealand Standard (AS/NZS) 1957:1998, Textiles—Care labelling with variations and additions made by Consumer Protection Notice No. 25 of 2010. In Australia, care instructions must be permanently attached to articles, be written in English, and be appropriate for the care of the article. Additional symbols may be used to clarify the instructions but symbols alone are not sufficient. As a minimum, laundering instructions include (in order) four symbols: washing, bleaching, drying, and ironing. Drycleaning instructions include one symbol. Professional Wet Cleaning symbols are included for information only as they are not currently recognised in Australia. Washing The washtub symbol tells you how the garment should be washed. The number inside the washtub is the maximum wash temperature. A bar underneath the washtub indicates that the garment should have mild treatment or washed using the Permanent Press setting. Two lines underneath the washtub indicate gentle or delicate treatment. Normal Permanent Press Delicate / Gentle Hand Wash 95°c 70°c 60°c 50°c 40°c 30°c Do Not Wring Do Not Wash Bleaching The triangle symbol gives information about whether it is safe to bleach the garment. Any Bleach (when Only non-chlorine Do Not Bleach needed) bleach (when needed) Drying Tumble Dry - Cycles Normal Permanent Press Delicate / Gentle Do not tumble dry © 2013, Drycleaning Institute of Australia Limited Tumble Dry - Settings Any Heat High Medium Low No Heat / Air Line Dry - Hang to dry Drip Dry Dry Flat In the shade Do not dry Ironing The Iron symbol provides information on how the garment should be ironed.
    [Show full text]
  • Analysis of the Polyester Clothing Value Chain to Identify Key Intervention Points for Sustainability Cristina Palacios‑Mateo* , Yvonne Van Der Meer and Gunnar Seide
    Palacios‑Mateo et al. Environ Sci Eur (2021) 33:2 https://doi.org/10.1186/s12302‑020‑00447‑x REVIEW Open Access Analysis of the polyester clothing value chain to identify key intervention points for sustainability Cristina Palacios‑Mateo* , Yvonne van der Meer and Gunnar Seide Abstract Clothing is one of the primary human needs, and the demand is met by the global production of thousands of tons of textile fbers, fabrics and garments every day. Polyester clothing manufactured from oil‑based polyethylene tereph‑ thalate (PET) is the market leader. Conventional PET creates pollution along its entire value chain—during the produc‑ tion, use and end‑of‑life phases—and also contributes to the unsustainable depletion of resources. The consumption of PET garments thus compromises the quality of land, water and air, destroys ecosystems, and endangers human health. In this article, we discuss the diferent stages of the value chain for polyester clothing from the perspective of sustainability, describing current environmental challenges such as pollution from textile factory wastewater, and microfbers released from clothing during the laundry cycle. We also consider potential solutions such as enhanced reuse and recycling. Finally, we propose a series of recommendations that should be applied to polyester clothing at all stages along the value chain, ofering the potential for meaningful and efective change to improve the environ‑ mental sustainability of polyester textiles on a global scale. Keywords: PET, Textiles, Value chain, Environmental sustainability, Microfbers, Pollution, Recycling, Life cycle Introduction with 2019 estimates in Germany suggesting an average Te global volume of fber production for textile manu- lifetime of only 4.4 years [5].
    [Show full text]
  • Textile Printing
    TECHNICAL BULLETIN 6399 Weston Parkway, Cary, North Carolina, 27513 • Telephone (919) 678-2220 ISP 1004 TEXTILE PRINTING This report is sponsored by the Importer Support Program and written to address the technical needs of product sourcers. © 2003 Cotton Incorporated. All rights reserved; America’s Cotton Producers and Importers. INTRODUCTION The desire of adding color and design to textile materials is almost as old as mankind. Early civilizations used color and design to distinguish themselves and to set themselves apart from others. Textile printing is the most important and versatile of the techniques used to add design, color, and specialty to textile fabrics. It can be thought of as the coloring technique that combines art, engineering, and dyeing technology to produce textile product images that had previously only existed in the imagination of the textile designer. Textile printing can realistically be considered localized dyeing. In ancient times, man sought these designs and images mainly for clothing or apparel, but in today’s marketplace, textile printing is important for upholstery, domestics (sheets, towels, draperies), floor coverings, and numerous other uses. The exact origin of textile printing is difficult to determine. However, a number of early civilizations developed various techniques for imparting color and design to textile garments. Batik is a modern art form for developing unique dyed patterns on textile fabrics very similar to textile printing. Batik is characterized by unique patterns and color combinations as well as the appearance of fracture lines due to the cracking of the wax during the dyeing process. Batik is derived from the Japanese term, “Ambatik,” which means “dabbing,” “writing,” or “drawing.” In Egypt, records from 23-79 AD describe a hot wax technique similar to batik.
    [Show full text]
  • Women in Industry
    GORNEM. LAW I.IBIIARY -Gxj; Kf Z5SS aiorttfU ICam ^t\\\xsx\ Eibtar^ Cornell University Library KF3555.A5B81 Women fn industry; decision of the United 3 1924 017 572 391 Cornell University Library The original of tiiis book is in tine Cornell University Library. There are no known copyright restrictions in the United States on the use of the text. http://www.archive.org/details/cu31924017572391 WOMEN IN INDUSTRY DECISION OF THE UNITED STATES SUPREME COURT IN CURT MULLER VS. STATE OF OREGON UPHOLDING THE CONSTITUTIONALITY OF THE OREGON TEN HOUR LAW FOR WOMEN AND BRIEF FOR THE STATE OF OREGON BY LOUIS D. BRANDEIS Assisted by JOSEPHINE GOLDMARK Fublication Secretary National Consumers' League REPRINTED FOR THE NATIONAL CONSUMERS' LEAGUE 105 East 22d Strest, New York City ^"io^^ol TABLE OF CONTENTS Pages Laws of the Several States in Force Limiting the Hours op Labor op Adult Women 1-8 ARGUMENT 9, 10 FIRST PART — Legislation Restricting the Hours of Labor for Women 11-17 I. THE FOREIGN LEGISLATION 11-15 n. THE AMERICAN LEGISLATION 16, 17 PART SECOND — The World's Experience upon which the Legislation Lvmitmg the Hours of Labor for Women is Based 18-112 I. THE DANGERS OF LONG HOURS 18-55 A. Causes 18-27 (1) Physical Differences between Men and Women . 18-23 (2) The New Strain in Manufacture 24-27 B. Bad Eppect op Long Hours on Health 28-46 28-36 (1) General Injuries from Long Hours ., (2) Specific Evil Effects on Childbirth and Female Functions 36-42 C. Bad Eppect op Long Hours on Safety 42-44 D.
    [Show full text]
  • CHEMICALS Laundry Detergent/Bleach
    Laundry Detergent/Bleach A A. INSTITUTIONAL HEAVY-DUTY DETERGENT CCP A concentrated blend of cleaning agents which will emulsify grease and dirt in either hard or soft water with excellent results. This synthetic detergent formula contains water softening, fabric brighteners, grease emulsifiers and soil suspending agents. 27600119 P550262 50 lb. 1/bx. B. ALL® POWDER LAUNDRY DETERGENT JOHNSON DIVERSEY ALL uses Stainlifters™ to safely lift dirt and stains. All Ultra® Powder Laundry Detergent 15200115 2979267 (100) 2 oz. Box 100/cs. B 15200176 2979304 150 Use 1/ea. All® Concentrated Powder Laundry Detergent 15200112 2979216 50 lb. Concentrated 1/ea. C C. SURF ULTRA® POWDER JOHNSON DIVERSEY LAUNDRY DETERGENT Surf® with Active Oxygen formula lifts dirt and odors while leaving laundry smelling fresh. 15200158 2979814 2 oz. 100/cs. D. TIDE® POWDER LAUNDRY DETERGENT PROCTER & GAMBLE Tide with bleach cleans so well…it’s the only detergent that kills 99.9% of bacteria, including Staphylococcus Aureus, Klebsiella Pneumoniae, E. coli and Salmonella Choleraesuis. Use D one full scoop as directed. Contains a unique activated bleaching system. Removes many tough stains and whitens whites. Helps keep colors bright. Non-phosphate. Harmless to septic tanks. EPA Registration No. 3573-56. 16902370 32370 33 oz. 15/cs. CHEMICALS w/Bleach Contains a unique active bleaching system. Removes many tough stains and whitens whites. Helps keep colors bright. No phosphate. Harmless to septic tanks. Kills 99.9% of bacteria (effective against Staphylococcus Aurius and Klebsiella Pneumoniae; use as directed). 16901801 02370 4 oz. 100/cs. 16900095 40026 8 oz. 14/cs. 16907330 84907330 33 oz.
    [Show full text]
  • Review Article
    Indian Journalof Fibre & Textile Research Vol. 29, December 2004, pp. 483-492 Review Article Development and processing of lyocell R B Chavan Department of Textile Technology, Indian Institute of Technology, New Delhi 110 016, India and A K Patra' The Technological Institute of Textile & Sciences, Bhiwani 127 02 1, India Received 20 June 2003; revised received and accepted December 2003 5 An account of Iyocell, covering the hindsight of its development and available brands has been reported. This wonder fibre surpasses all other cellulosic fibres in terms of properties, aesthetics and. quite importantly. ecology in manufacturing. Among the various names with which Iyocell is available. Tencel and Tencel A 100 are the prominent and widely used. Be­ sides dealing with the various attributes of Iyocell, the options for wet treatment of the fibre with reference to steps of proc­ essing. suitability of dyes and process parameters have also been addressed. Keywords: Fibrillation, Lyocell, Peach-skin effect. Tencel. Tencei A 100 IPC Code: CI. DO 1 F 2/00. D2 1 H 13/08 I nl. 7 1 Introduction solved solids. The viscose rayon manufacturing proc­ ' There has been a growing demand for absorbent fi­ ess is also energy-intensive. Besides this, viscose bres with the need hinging on comfort and fashion. rayon production has high labour demand, mainly due Since cotton production can not go beyond a particu­ to the complexity and number of steps involved in lar level due to limited land availability, the other ob­ converting pulp into rayon fibre. vious options are viscose and the likes. But again, Among the modified viscose fibres, high wet with the increasing awareness of ecofriendly con­ modulus (HWM) rayon involves relatively simple and cepts, viscose is not quite highly rated because its economical manufacturing process, but the zinc used manufacturing plants have inherent problem of efflu­ in this process is a known pollutant.
    [Show full text]
  • Nylon Wool Fiber Columns
    U.S. Corporate Headquarters Polysciences Europe GmbH Polysciences Asia-Pacific, Inc. 400 Valley Rd. Badener Str. 13 2F-1, 207 DunHua N. Rd. Warrington, PA 18976 69493 Hirschberg an der Taipei, Taiwan 10595 1(800) 523-2575 / (215) 343-6484 Bergstrasse, Germany (886) 2 8712 0600 1(800)343-3291 fax +(49) 6201 845 20 0 (886) 2 8712 2677 fax [email protected] +(49) 6201 845 20 20 fax [email protected] [email protected] TECHNICAL DATA SHEET 425A Page 1 of 2 Nylon Wool Fiber Columns BACKGROUND NYLON WOOL FIBER VS. SHEEP RBC ROSETTING METHODS Researchers have been using nylon wool fiber procedures to separate T-cell and Wong and Mittal (1981)9 did extensive research comparing the methods of Nylon B-cell lymphocytes for more than 20 years. In the early 1970’s M. H. Julius et al Wool Fiber separation and the commonly- used and well-studied sheep RBC (1973),1 Eisen et al (1972),2 and Greaves & Brain (1974)3 described specific (SRBC) rosetting.10,11 Wong and Mittal were interested in isolating B-cells for conditions for the use of Nylon Wool Fiber in columns or plastic straws. These serologic typing of HLA-DR antigen. protocols resulted in yields of 50-90% T-cell recovery and 10-100 fold B-cell depletion. Wong and Mittal concluded that “Due to its simplicity and reliability, nylon wool adherence may be preferred over the SRBC rosette method for the routine pheno- These early researchers found it necessary to scrub or wash their Nylon Wool Fiber typing of B-cells.” Their findings are illustrated in Table 1.
    [Show full text]
  • Leather Care & Cleaning
    L eather Care & Cleaning Guidelines for Cleaning Leather. Leather Care and Cleaning Guide. The Leather Institute. 2011 For more information or questions or comments please contact The Leather Institute at [email protected] General Leather Care and Cleaning Instructions A word about leather care products… There are many products available for cleaning leather and removing stains. The products best suited for cleaning leather are those recommended by the Leather Supplier. Townsend Leather recommends using ONLY The Leather Institute care and cleaning products. The Leather Institute products are especially formulated to work perfectly with Townsend Leather. When cleaning leather... Never use: Any High pH cleaner Cleaners that contain abrasives Cleaners that contain alcohol Cleaners that contain Butyl Cellosolve Any strong solvent Saddle soap Mink oil Wax Furniture polish Glass cleaner Or any strong solvents, abrasives or caustic household cleaners such as soap or dish detergent. These vary widely in strength and in compatibility with today's water-based leather finishes and may cause cracking or other damage to the leather surface. Direct sources of heat and extended exposure to heat sources and to direct sunlight may also be harmful to the leather and should be avoided. Always use: Leather care products recommended by The Leather Institute and only use those products in the prescribed method. The only acceptable products for use on Townsend Leather products are The Leather Institute Finished Leather Care Products or leather care products approved by Townsend Leather: Finished Leather Cleaner Finished Leather Cleaning Wipes Cleaner, Conditioner, Protector Ink & Stain Remover Stick 100% Cotton Terry Cloth Rags (White Only); commercially available A solution of distilled water a mild non-detergent soap Basic Leather Cleaning Techniques The most basic task at any level of cleaning is a thorough vacuuming.
    [Show full text]
  • Analysis of Artificial Leather with Textile Fabric on the Backside
    Volume 6, Issue 2, Fall2009 ANALYSIS OF ARTIFICIAL LEATHER WITH TEXTILE FABRIC ON THE BACKSIDE Darko Ujević, Stana Kovačević, *Larry C. Wadsworth, Ivana Schwarz, and Blaženka Brlobašić Šajatović University of Zagreb, Faculty of Textile Technology, Zagreb, Croatia *The University of Tennessee, Department of Materials Science and Engineering ABSTRACT The fundamental characteristics of a textile fabric intended for the vehicle interior is presented. Chemical and physical-mechanical properties of artificial leather with bonded textile fabric on the back side are analyzed. The most important parameters for leather durability are: breaking force and elongation-at-break, and these properties will be tested in different circular directions. Likewise, chemical properties of artificial leather and basic construction parameters of the textile fabric are investigated. When using artificial leather, physical-mechanical properties of artificial leather as well as the quality of the seams are most important. In addition to the results obtained, physical-mechanical properties and aesthetic evaluation of the joined places will be compared. Keywords: Artificial leather, Textile fabric on the back side, Joined place strength, Seam strength, Physical-mechanical properties Introduction pleather (plastic leather) is a slang term for synthetic leather made out of plastic, a In addition to ergonomically designed car portmanteau of plastic and leather, the term seats for keeping the body in a correct sitting can be either descriptive, or derogatory, position, it is important that the passenger depending upon the user (the derogatory use feels no bodily fatigue due to sitting implies use as a substitute for genuine discomfort. Pleasant contact between the animal hide leather to cut costs).
    [Show full text]