Triumph Cars Is by Far the Most Important Part of Our Business

EDITION 2.2

SOURCE CODE GT6M4 THE RIMMER BROS SERVICE

WE HAVE THE HELPING YOU CARE FOR YOUR GT6 Although the GT6 was manufactured from 1966 to 1973, only some 41,000 cars were produced (just 13,000 of the favoured Mk3’s), so if you own one it makes good sense to maintain it in the best possible PARTS condition. It is the job of Rimmer Bros to help you do this, supplying parts for classic Triumph cars is by far the most important part of our business. - With British Motor Heritage as your assurance of quality, our aim is to keep a stockholding so comprehensive that we nearly always have the parts you need, and to back it with the commitment to get WE GUARANTEE them to you immediately. We try very hard to succeed in this, every time. THE QUALITY THIS CATALOGUE We have listed parts most frequently called for, but it is by no means exhaustive. Our stock lines are - continually increasing therefore, if the part(s) you require are not listed, please contact our sales office where our staff will be please to check availability and price for you. WE’RE KEEN ON MEMBERS OF BRITISH MOTOR HERITAGE PRICE British Motor Heritage is an organisation committed to the preservation of the cars which have special places in our motoring - history. One of the ways in which it pursues TR2-8, SPITFIRE, GT6, STAG, 2000/2500, this objective is by helping to ensure that HERALD/VITESSE, DOLOMITE/SPRINT. SD1 WE DELIVER replacement parts are available and are of sufficient quality. Stringent standards are necessary to meet the requirements of Heritage approval, and the highest accolade for any company involved with the supply of parts for classic cars is to have Heritage approval. FAST Rimmer Bros were invited to Heritage membership in 1987 and are approved for Triumph and Rover - SD1 models. THE CARS WE SPECIALISE IN WE KNOW YOUR As well as supplying parts for your GT6, we also concentrate on TR2/3/4/4A, TR5/250, TR6, TR7/8, Stag, Spitfire, Dolomite, 2000/2500/2.5Pi, Herald, Vitesse, Rover SD1, Range Rover, Discovery, Freelander, CAR 90/110 and Land Rover ‘Series’ vehicles. Please refer to inside rear cover for details on all our catalogues. -

UK. WORLDWIDE . THE 1 SO WHERE DO WE GET OUR PARTS THE PEOPLE YOU’RE DEALING WITH Wherever possible we supply original stock This company really is owned by two brothers from BL/Rover sources - lots of parts are still named Rimmer. Bill and Graham started their manufactured. Where this fails, we sometimes have business from humble beginnings in the early parts re-manufactured. We have Heritage approval 1980s, and it has grown to be one of the leading to do this, because we have satisfied them as to organisations of its kind in the world, supplying our quality control standards, and we use original parts Worldwide to an ever growing list of tooling and factory drawings where these are customers. available. Where original parts are unavailable and Both Bill and Graham still work full-time in the the cost of re-manufacture is prohibitive, we may business, helped now by over 50 members of staff. supply a suitable alternative or in certain cases The main qualification of membership of our offer a used (non safety critical) part. staff is a recognition that our customers, and our company reputation, depend on our ability to get every aspect of our service right first time.

COMMITMENT TO CUSTOMER SERVICE Helpful - Accurate - Fast - Efficient

The overall objective at Rimmer Bros is to achieve customer satisfaction at all times. THE STOCK WE NEED TO GIVE THE Our people know your car well, and every member of our staff is dedicated in SERVICE YOU NEED helping to preserve Classic Cars. Our degree of specialisation means two things. Our computer system gives up-to-the minute information regarding availability and the price of any item. Firstly, our people know the cars we’re dealing We have an enviable reputation for despatching goods when the customer needs it, quickly and efficiently. with inside and out, and can give you any advice We try to make all our systems and documentation easy to follow and use, you might need regarding part selection. and make sure that our catalogues and price guides really do help our customers choose Secondly, we are able to stock in depth just the right parts easily, first time. about any part you might need. Triumph House is our latest HQ, acquired in 1991. With nearly 50,000 square feet of warehousing alone, it is a cavernous building, and it needs to be! It currently contains more than 350,000 recorded part numbers with over 25,000 stock lines, and we hold as many of each as necessary to make it almost impossible to run out of stock. All other aspects of our operation receive equal TRADE MARKS & LOGOS: The ‘Triumph’ and ‘Heritage’ logos used herein are registered Trade Marks of British Motor Heritage Ltd, and are emphasis. A truly efficient mail order and stock used with their license under the special ‘Heritage’ approval scheme. control system. The latest racking and storage © Copyright Rimmer Bros. All rights reserved. No part of this facilities for fast and accurate “order picking”. publication may be copied, reproduced, stored in any retrieval system, communicated or transmitted in any form or by any means, including Careful packaging and despatch procedures. Photocopying, Electronic, Mechanical or otherwise, without prior written permission from Rimmer Bros Ltd. TRIUMPH PARTS SPECIALIST 2 TELEPHONE NUMBER THIS CATALOGUE & OUR PRICE GUIDE SALES There are no prices in this catalogue. Use it to select the parts you need, then check their cost by referring to the separate Price Guide which represents the other half of our ordering system. The price guide is updated and reprinted more frequently, but we ask that you confirm all prices when ordering. It may also list additional parts (new lines) that we have introduced since this catalogue 01522 was printed, and it has more detailed information about ordering & delivery methods. It also has information on warranties and a ‘Trouble Shooter Guide’. ORDERING BY PHONE 568000 Please quote your home postcode and part numbers where possible. This gives instant access to our computerised records and stock control system. If you have any difficulty in selecting the (Overseas +44 1522 568000) parts you need, our expert staff can help.

FAX NUMBER SALES 01522

567600 UK Payment for Phone Orders (Overseas +44 1522 567600) (See also “Overseas Orders & Payment.”) When you have checked on price, availability and delivery costs you can place your order by phone using Visa, MasterCard, Delta/Connect, Switch, Solo, American Express, Diners Club, or JCB. You will merely need to tell us the card number, expiry date (or issue number), cardholder’s full ADDRESS DETAILS name and registered card address. After Hours Ordering Service Rimmer Bros, Triumph House, We operate a 24-hour answering/ordering service which is available to card holders out of Sleaford Road, Bracebridge Heath, normal hours for both UK and Overseas customers. Just leave all necessary details on our telephone Lincoln, LN4 2NA, England. voice mails, ie your vehicle type, year, model, the parts and/or the part numbers you require, plus your name, address (inc, postcode), credit card details and delivery address (if different). Writing out these details before phoning usually helps a caller to give us clear instructions. If at all possible, please also leave a daytime telephone number. ORDERING BY E-MAIL AND THE INTERNET ORDERING BY POST

For Internet surfers our web site holds Triumph House, Sleaford Road, Bracebridge Heath, Lincoln, LN4 2NA, England. details on all our parts catalogues and has an on line ordering facility. Use our We ask you to phone first if at all possible - to check your parts selection, and to advise of E-Mail address for sending your order or delivery charges. Because prices and availability sometimes change, we can also confirm the exact parts enquiry. State if you require us to remittance needed avoiding unnecessary delays. If you have not been able to telephone, please give confirm prices, as they can sometimes us all possible information - car type/year, RH or LH, front/rear etc - so we can check your selection alter at short notice. (including your name, address and postcode) in all correspondence. Use our Order Form if you can. It asks specifically for all the details we might need. Please E-Mail: photostat or request additional copies of the order form if required. [email protected] UK Payment for Post Orders (See also “Overseas Orders & Payment.”) Send your remittance with the order. The ‘Pricing’ section in the Price Guide tells you how to calculate the amount. We accept payment by personal cheque even if the cheque guarantee card limit is exceeded. All we require is your full name and address on the back of the cheque along with your cheque card number and for business cheques, a relevant letterhead. Cheques or P.O.s made out “Rimmer Bros Ltd” please. Note, if you are unsure as to the exact amount to send, you can write across the top of your cheque, “Cheque Value Not To Exceed £...”. You can post us your credit card details if you prefer. If you send cash, note that we cannot accept responsibility for any loss, so registered mail is essential. Bank drafts and Building Society cheques are also accepted. For Bank Transfer information see Price Guide.

ORDERING BY FAX UK CUSTOMERS: 01522 567600 OVERSEAS CUSTOMERS: +44 1522 567600 Order through our website See also “Overseas Orders & Payment.” using our secure on-line Another facility for customers who wish to make enquiries, or order by credit, debit or charge card. Again, we will need your name, address (inc. postcode), credit card details and delivery ordering system! address (if different). Plus fullest possible car/parts details - as for orders by post.

All the latest news, special offers, products and prices just a ‘click’ away. www.rimmerbros.co.uk 3 CATALOGUE CONTENTSCONTENTS PAGE Popular Parts (Quickfinder) 6 Engine 7 Clutch 11 COLLECTING IN PERSON Engine & Gearbox Mountings 11 If you wish to ‘call and collect’, you will always be made welcome at our shop and sales counter Cooling & Heating 12 during business hours. Our Visitor Information Centre has lots of interesting details of each production Fuel System 13 model and the factories where they were produced. Customers drive here regularly from all over Europe. Lincoln is a historic Cathedral city and is an Exhausts 15 excellent place to visit. We’re about 2 miles south of Lincoln on the A15 Lincoln to Sleaford road (see Gearbox & Overdrive 19 map on back cover). We advise you to pre-check by phone that we have the part/s you want in stock. Propshafts 20 We accept payment by credit card, cash, bank draft, travellers cheque, building society cheque, Differential 21 and personal cheque (when presented with a cheque card) even if the cheque card limit is exceeded, and by business cheque with accompanying letterhead. Drive Shafts 21 Suspension PRICING Front 23 For full information and details on prices, VAT, & VAT exempt export sales, please refer to the Front Overhaul Kits 25 latest Price Guide. Written quotations are available on request, for parts and/or delivery charges. Uprated Packages 26 Please confirm all prices when ordering - prices and availability can sometimes change at short notice. Up to date prices can be found on our web site. Rear 27 Road Wheels 29 OVERSEAS ORDERS & PAYMENT Brake System 30 We supply parts to classic car owners Worldwide. Steering 33 We have thousands of customers in Europe and WE EXPORT TO THE Electrical System 34 regularly send parts as far afield as Australia, North Chassis 38 America, Africa and the Far East. Delivery costs of course, vary greatly (depending on Body Parts 39 size/weight/urgency). We can quote accurately for the Exterior Trim & Badges 49 cost of parts and delivery once your requirements are EC & WORLDWIDE Bumpers 50 known. Interior Trim 52 Our Multi-language European Order Forms explain TEL: +44 1522 568000 how to order parts in English, Italian, German, Spanish Accessories 56 and French. FAX: +44 1522 567600 General Fasteners 70 E-MAIL: [email protected] Index 71 Payment By Export Customers: NEW & RECONDITIONED PARTS There is a choice of payment methods for customers overseas; Almost every part we list is sold brand-new, but in many A) Credit card, Debit card or Charge card. instances we also offer you the facility to buy “Reconditioned” B) Bank cheque - in ££s sterling (Drawn on a London Bank) (usually giving us your old component in part-exchange). C) Travellers Cheques (signed) - in ££s sterling. Where there is a reconditioned version of a part, you will D) Giro Cheques in ££s sterling. find the letter ‘R’ added at the end of the part number. E) By Bank Transfer - see Price Guide. EXCHANGE SURCHARGES (REFUNDABLE) PLEASE NOTE THAT ALL TRANSACTIONS MUST BE IN ££s STERLING. Where parts are sold on an exchange basis, an “Exchange Surcharge” is applied – a deposit in effect, which is refunded to you when your old unit is received by us. This system allows CHOICE OF DELIVERY METHODS you to make an exchange without having to send the old unit (For Further Information/Cost Details, Please Refer to Price Guide) first ... it can often prevent your vehicle being off the road. The amount of the Exchange Surcharge is shown in the Price Guide UNITED KINGDOM in italics below the part number. There are numerous delivery options for the UK mainland ranging from Post (first class or parcel Before returning your old unit, please telephone our customer service dept on 01522 568000 in order to obtain a post) to overnight carrier services. We can advise of the best method of despatch when you return authorisation number. See reverse of invoice for full telephone. The type of service that we recommend depends upon the size, weight and urgency of the details of return procedure. Units must be drained of oil, water and be serviceable; we reserve the right to retain all or part of parts you require. the surcharge if the unit is irreparable, damaged or not Our price guide indicates the approximate costs, and we will confirm the final invoice total at the identical to the type supplied. end of the call if required. SELECTED USED PARTS WORLDWIDE (NON EC COUNTRIES) We are often asked for parts that are no longer available, We started exporting parts Worldwide in 1982, and since then we have gained an excellent where the cost of re-tooling or re-manufacturing is prohibitive, reputation for our speed & efficiency of service. and there is little or no chance of the part becoming available. We have also found that some customers prefer the option of Delivery costs are based on size, weight, and method of delivery. We have discounted rates with being able to buy a (non safety critical) used alternative, where well known carriers, so costs are kept to a minimum. Send us a list of the parts you need (using post, perhaps the cost of a new part is unjustified. phone, fax or E-Mail), tell us quantities and urgency, and we will work out the best delivery method Over the years, we have acquired many parts which are suitable for re-sale. You will find these parts listed in the Price and quickly advise you of the cost. Guide under the same part number reference as new but with a Written quotations are available on request. ‘U’ suffix. All used parts have been cleaned and inspected and are sold as serviceable when fitted. EC COUNTRIES The European Community Single Market permits the free movement of goods between all EC “Errors & Omissions Excepted. All parts offered subject to availability. countries. This allows us to provide a superb service to all our customers within the EC, with the All part numbers, illustrations and photographs used in this catalogue are intended for reference/identification purposes only, and are not necessarily an exact representation of the benefits of improved delivery - via lower charges and easier documentation. Deliveries can be easily goods supplied. Whilst we make every effort to ensure the accuracy of product descriptions arranged using air or surface transport. Our Price Guide indicates approximate costs. in this catalogue, they are based upon information supplied by the manufacturer/distributor at the time of publication. There may be occasions - due to circumstances beyond our control - when specifications are changed, or when goods become temporarily unavailable.” Certain part numbers have been superseded to an alternative number when a later version or updated specification is offered. 4 “Born in LeMans” Only a year after the Spitfire went into production in 1962, which kept the transverse leaf spring, but also used a reversed lower Triumph built a prototype 'Spitfire GT', with a smart fastback coupe wishbone: wheel camber changes were much reduced. body style. The GT6 Mk2 was a much-improved car. Not only did it have Within months this one-off car was further modified, with a six- much better roadholding than before, but there was a new type of cylinder engine - and the GT6 project got under way. cylinder head and more peak power (104bhp instead of 95bhp), a new As a prelude, 'works' Spitfires with GT6-style bodies raced at Le facia style, cabin air outlets and a heated rear window glass both Mans in 1964 and 1965, before the original GT6 road car was helping to improve the ventilation. introduced in October 1966. These first cars used modified versions of Styling retouches for the Mk2 included a raised front bumper and the Spitfire chassis and suspensions, but shared almost all of their Rostyle wheel covers, while from late 1969 more improvements running gear - 2-litre six-cylinder engine, all-synchromesh gearbox included reclining seats and a new-style steering wheel. with optional overdrive, and a more robust rear axle - with the Vitesse From late 1970 the GT6 Mk3 took over, this sharing many 2-litre model. styling changes with the latest Spitfire, the Mk IV. Although this was Because of the new car's character, which combined the sleek basically the same shape as before, almost every external panel was styling, a silky-smooth six-cylinder engine, high gearing, and a changed and was more smoothly detailed than before. Perhaps this was characteristic exhaust note, with a well-equipped two-seater cabin and a aerodynamically smoother than before, for the car's top speed rose to lift-up rear hatch, the new GT6 was often dubbed a 'mini-E-Type'. 112mph. Triumph was happy to develop this image for the new car, wanting it to Raised panel joints on front and rear wings had been eliminated, be seen as an altogether more up-market model than the Spitfire. the side window profile was altered, and there was now to be a sharply The original cars, built until the autumn of 1968, had 95bhp 2- cut-off rear panel. Yet another wheel style was chosen, and the front litre engines, and could reach about 105mph. All had the same type of bumper was closely integrated into the new-shape front pressings. polished walnut interior, and a large carpeted space behind the seats. The Mk3 was very popular in the UK, where sales rose sharply, Although both were optional extras, many cars were sold with but less so in the USA, where new exhaust emission and other safety overdrive, and with centre-lock wire spoke wheels. regulations degraded the performance and hit all British sports car Although the GT6 was an immediate sales success, there was sales. For 1973 there was one final change to the GT6's chassis criticism of the car's swing-axle rear suspension, and of the poor specification, where the latest Spitfire type of 'swing spring' type of ventilation of the small cabin. Major improvements to the roadholding swing-axle rear suspension took over from the unique 'lower wishbone' could only be made by a complete re-design, so for the GT6 Mk2 type, but relatively few of these cars were ever made. Triumph abandoned the swing-axle system, substituting a new layout The last GT6 of all was built in November 1973.

5 QUICKFINDER RX3002 144370 610675 612792 612806 517666 156353 402694 517792 121766 133915 149353 159848 913442 909029 904487 610657 630755 119450 C8939A RG1113 RG1018 RG1128 RG1053 RX3007 GSD111 GSD115 GCD301 RG1059 RG1060 119450P 517666P C8939AP RG1113P GCD301P GHK1528 GHK1022 GHK1011 RG1059UR RG1060UR (1) (2) (4) (To KC56077, KE12389, KF12390) (Per hub) (Per hub); (2 discs & pads) (2 discs & pads) (Radius eyes) (inc. sleeve) (to bulkhead) (Includes OE Spec’ cover, plate & bearing); (KE12390 & KF12391 onwards) Mk1 (NON-Rotoflex)Mk2 & Mk3 (ROTOFLEX)Mk3 (NON-Rotoflex) (1) (1) (1) Uprated discs & pads (1) Uprated discs & pads (1) Standard discs & pads (1) Standard discs & pads (1) StandardPolyurethane (2) (2) OuterInner (2) (2) Mk1 & Mk2 (1) Polyurethane Mk3 (RHD/LHD)Mk1Mk2 & Mk3Front cable (Short)Rear (Main) Cable - (1) (1) (1) NON-Overdrive (1) (1) Mk3Glass to tailgateTailgate to body (1) (1) (1) Standard (4) Overdrive (1) Polyurethane (2) ROTOFLEX vehicles (2) Disc & pad set Disc & pad set StandardStandard (2) (4) Mk1 (Late), Mk2 & Mk3Mk1 (Late), Mk2 & Mk3 (1) (1) NON-Rotoflex vehicles (2) PolyurethaneOriginal (4) (2) Replacement (2) DESCRIPTION REQ. QTY PART NO. Rotoflex vehicles bush Rear spring Overhaul kit - Inner wishbone Rev counter cable (1) Radius arm bush Hose kit (Per vehicle); Front hub bearing kit Bolt kit - Rotoflex coupling (2) Door waist seal (Top); Door aperture seal/surround (2) Windscreen rubber; Rubber/Furflex ‘A’ post weathersealRubber/Furflex (2) Refer to ‘Brake System’ for details on all brake kits. Mk1, Mk2, & Mk3 Early Mk3 Late Cables Accelerator Cable; Choke cable; Handbrake cable; Speedometer cable; Rubber Seals Tailgate rubber; Bonnet seal Rear quarterlight seal (2) Per side & includes, 1 bolt 149003, 4 bushes 148926, Per side & includes, 1 bolt 149003, 148939,4 dirt seal 148950, 2 spacer/tube 148948, 4 water shield 1 bush 548208, 4 water shield 148940, 1 washer WC112081, 1 bolt BH608221 & 2 nut GHF275. 3 short bolts. Per coupling, includes 3 long and Shock absorber bush Kits This is just a small selection from our range of kits which we have available for the GT6. Our kits enable you to order all the correct parts (with the minimum of fuss, and save to money!), by using just one part number. Please refer relevant sections for detailed listings and kit contents. Clutch kit Includes all radiator/heater hoses & clips. Brake Kits (Front) Rotoflex coupling; Rear hub bearing kit 119450 155310 102987 517985 123998 119451 514191 143456 132292 128978 117952 146321 119451 122689 159656 133568 131796 117578 88G564 7H8325 C8939A RG1193 GHS111 GHS125 GHS130 GHS146 RH5080 119450P 102987P 119451P 517985P 119451P 146321P UKC8330 UKC1110 C8939AP RG1193P RH5080P DAM5079 155310PS 123998PS (2) (1) (1) (1) 6 (Per side) (Bellhousing) (Radius arm to pivot bracket) (Timing cover) (Radius arm to vertical link) (Main) POPULAR PARTS POPULAR StandardPolyurethane (2) (2) StandardPolyurethane (2) (2) Non-O/drive (1) Overdrive (1) Standard (8) Polyurethane (8) StandardPolyurethane (4) (4) StandardPolyurethane (2) (2) Outer (2) OuterInner (2) (2) Inner (2) StandardPolyurethane (2) (2) Standard (2) Polyurethane (2) Upper (2) Lower (2) Lower StandardPolyurethane (4) (4) Mk3 (from KE/KF20001) Rear Rear output - Pinion (front)Output (side) (1) (2) Front PolyurethanePolyurethane (2) (2) StandardStandard (2) (2) Upper StandardPolyurethane (2) (2) Non-overdrive models (2) Mk1, Mk2 & Mk3 (to KE/KF20000) Overdrive models (1) Front Front cover ROTOFLEX vehicles NON-Rotoflex vehicles Rear RearFront (2) DESCRIPTION REQ. QTY PART NO. Upper suspension overhaul kit Upper wishbone bush Differential oil seals; Shock absorber bush Lower inner suspension overhaul kit Trunnion bush kit Front shock absorber bush; REAR SUSPENSION Please refer to REAR SUSPENSION for detailed listings. NON-Rotoflex vehicles Rear spring bush Per side & includes; 1 ball joint GSJ155, 2 bolts BH605181, 2 nuts GHF222, 2 washers GHF332, 1 nut GHF224, 1 washer WD600071, 2 bushes 119451, 2 bolts BH606181 & 2 nuts GHF223. Per side & includes 2 bushes 119451, 2 bolts BH606201 & 2 nuts GHF223. Includes 1 spacer 140983, 2 bushes 140892, 2 inner shields 140894, 2 seals 122534, & 2 outer shields 140985. Bushes Engine mounting (Rubber)Gearbox mounting (Rubber); (2) FRONT SUSPENSION Please refer to FRONT SUSPENSION for detailed listings. Anti roll bar mounting bushes; Mountings/Suspension Oil Seals seal; Crankshaft oil Gearbox & overdrive oil seals; Gearbox & overdrive oil Front hub sealRear hub seals; (2) Radius arm bush; Differential mounting bush GFE138 GCL110 GCL132 207102 138701 138792 138791 211126 215350 GTG103 GHT142 GEG701 GEG718 GEG387 GEG413 GEG682 GEG346 GEG346 GEG198 GEG214 GEG515 GEG115 GEG198 GSC104 GCS105 RG1034 RG1169 RG1170 RG1169 RG1019 GDC109 RR1243 AJM613 GWB112 GWB118 GFE7004 GFE1051 134176A GHT142S GSP4362 GSP6462 GEG214K GRA2110 AJM1193 GWB199S GWB199B GFB11162 GFB11150 GCL110HP GCL132HP GCB11125 GCB11088 GCB11125 (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) If you are unsure, you will find each part listed again under its appropriate section. its appropriate listed again under find each part will you unsure, are If you (To engine plate) ‘Tag’ (1) ‘Tag’ (1) (Ballast resistor type) (From KC/KD7906E) (Block & head) (In-line)

(Recessed) (Non-recessed) (Recessed) (Non-recessed) (From engine no KC7906E) (To engine no KC7905E) (From KC76719) (To KC76718) (To KC/KD7905E)

StandardHigh Performance (1) (1) Standard (1) High Performance (1)

MK2 & MK3 (1) MK1 (Late)MK1 (Late) (1) (1) MK2 & MK3 (1) Mk3 Mk1 (1) Mk2 (1) Mk3 SiliconeMk3 (6 volt) (1) StandardMk1 & Mk2 (12 volt) (1) Mk3 Mk1 Water pump to housing (1) Housing to cylinder head (1) With oil seals (1) Without oil seals (1) Mk2 (Silver)Mk3 (Black)Mk3 (Silver) (2) (2) (2) Mk1 & Mk2 (Silver) (2) Mk3 (1) Mk1 (Late) Mk2 Mk2 Double core (6) Standard (6) Mk1 (Late) (1) Mk2Mk3 (1) Standard (1) Spin-on conversion type (1) Mk1

Mk1 Mk2Mk3 (1) (1)

This section will help you find the parts which are most frequently called for; filters, gaskets, seals, bushes, etc. seals, bushes, gaskets, for; filters, called most frequently are which the parts find you help section will This Timing cover gasket Rocker cover gasketInlet/exhaust manifold gasket; Exhaust downpipe/flange gasket; (1) Head gasket only; Plug lead set Ignition coil; Ballast resistor (Mk3 only)Fan belt; (1) Thermostat gasketFuel pump to block gasketCore plug set (1) (1) Sump gasket onlyWater pump Gaskets; (1) Sump gasket set; Wiper Blade; Distributor capRotor armCondenserContact breaker pointsSpark plug (1) (1) (1) (1) Front engine plate to block gasket

Head gasket set; Engine Gaskets

See: Important Information - Early GT6 MK1 Engines/Components. belt. Include plugs, points, air filter/oil filter (standard), condenser & fan Engine Service Kits Air filter element Fuel filter (2)

Oil filter element Service Items Service DESCRIPTION REQ. QTY PART NO. Short Engine Build-up When building up a short engine to a complete assembly, check the condition of timing tensioner, sprockets, water chain, camshaft, cylinder head face (for pump, flatness), valves, guides, cam followers, camshaft etc, and replace where necessary. We supply all these components separately if required along with gasket sets, oil seals, spigot bush, oil filter etc. The condition of the radiator is crucial to ensure proper and efficient cooling - either replace or have tested professionally (see Warranties), as are all the hoses and thermostat, we strongly recommend these are examined carefully, or replaced as a matter of course. Ensure correct strength anti-freeze is used in the cooling system. Carburettors should be in good working order with mixture and balance set correctly.

New Rocker Arms New Rocker New Rocker Shaft New Rocker New Valve Guides New Valve New Valve Springs New Valve New Exhaust Valves New Inlet Valves New Pistons & Rings New Oil Pressure Relief Valve, New Oil Pressure Oil Filter Cylinder Block Re-bored Cylinder Block New Oil Pump Supplied New Big end Bearings TION COMPONENTS RELATED & JOTTINGS TECHNICAL TION ● ● ● ● ● ● ● ● ● ● ● ● DESCRIPTION REQ. QTY PART NO. SPECIFICA SPECIFICA BENCH TESTING A new oil pump MUST be fitted (part No 217488). All units are drained of oil/water before despatch. and are suitable for unleaded fuel. and are are built to the following specification; are RECONDITIONED EXCHANGE ENGINES EXCHANGE RECONDITIONED Note: 7 Please Note; RECONDITIONED FULL ENGINE FULL ENGINE RECONDITIONED familiarise yourself with the RECONDITIONED SHORT ENGINE RECONDITIONED SHORT Oil pump, Cam, cam followers & sprockets are not supplied with short engines. Full Engine Build-up Cylinder Block Re-Bored Cylinder Block New Oil Seals New Cam Chain & Tensioner New Cam Followers Camshaft Re-Profiled New Big end Bearings New Thrust WashersNew Pistons & Rings Spring and Switch New Thrust Washers New Main Bearings New Main Bearings Crankshaft Re-groundCrankshaft Crankshaft Re-groundCrankshaft When building up a Full Engine to a complete assembly, check the condition of your old water pump, if unsure, replace it. The condition of the radiator is crucial to ensure proper and efficient cooling - either replace or have tested professionally (see Warranties), as are all the hoses and thermostat, we strongly recommend these are examined carefully, or replaced as a matter of course. Engine mountings, clutch etc, should also be inspected and renewed where necessary. Ensure correct strength anti-freeze is used in the cooling system. Carburettors should be in good working order with mixture & balance set correctly. Please running-in and head re-torquing instructions on the card supplied with every engine unit. If this card has become separated from the engine when you take delivery, please contact us.

All our Reconditioned `Full Engines’ have a high rebuild specification rebuild a high `Full Engines’ have All our Reconditioned

All our Reconditioned `Short Engines’ (ie block, crank, pistons & rods) pistons & rods) (ie block, crank, All our Reconditioned `Short Engines’ can supply all the necessary gasket sets and components etc, required to build-up a short engine. ● COMPONENTS RELATED & JOTTINGS TECHNICAL ● ● ● ● ● ● ● ● ● ● ● ● Apart from having a multitude of new parts & components fitted - and with a 12 month/12,000 Mile Apart from having a multitude of new parts & components bed after assembly. During the test-run period (at Warranty - our engine units are run on a test and seals are checked, and the water temperature varying engine speeds), all external joints are operation. After the Bench Test, the engines undergo and oil pressure are monitored to verify correct a final inspection and are prepared for sale. manifolds, water pump and other ancillaries. Our Full Engines are assembled ready to accept details are supplied with every unit. We can also Additional installation information and running-in all necessary gaskets/oil filter etc, enabling you to supply a `Full Engine Installation Kit’ that includes fitting can be arranged locally in Lincoln if install the Full Engine in your vehicle. Alternatively, required, at a very reasonable cost. Additional installation information & running-in details are supplied with every unit. Don’t forget that we Additional installation information & running-in details are supplied with every unit. Don’t forget Please check existing engine number to ensure correct unit is ordered. Units are supplied ‘off the are supplied ordered. Units unit is ensure correct number to engine check existing Please engine your existing can recondition we Alternatively, a short engine. full engine or either as a shelf’ should be us to establish what ancillaries engine, please contact Prior to purchasing an if required. for details. to latest Price Guide be serviceable. Refer old exchange unit must removed. The DESCRIPTION REQ. QTY PART NO. onwards onwards KC/KD50000E KE/KF10000E KC/KD5000E To To To

Components’ GT6 Mk2 Mk2, and Mk3’s. Comp’ Ratio 9.5:1 Comp’ Ratio 9.5:1 from your old unit. stated otherwise. Comp’ Ratio 9.25:1 Comp’ Ratio 9.25:1 Comp’ Ratio 9.00:1 GT6 Mk3 (Late) GT6 Mk1 (Late) GT6 Mk3 (Early) GT6 Mk1 (Early) GT6 Mk1 SHORT ENGINE SHORT

to the supply problems; IDENTIFICATION ENGINE COMPONENTS proud at the rear of the block. ENGINE NUMBERS ENGINE Engine Number KC1 not have a tag on the head gasket. engines have Non-Recessed bores, and do AND CYLINDER BLOCK Engine Number KE/KF10001E Our reconditioned full engines are Engine Number KC/KD50001E Engine Number KC/KD50001E engines have a Recessed Lip at the top of Engine Number KE/KF1 Engine Number KC5001 Engine Number KC5001 extremely scarce, and NOT (generally)

RECONDITIONED FULL ENGINES GT6 & COMPRESSION RATIOS & COMPRESSION based on the later Mk1 GT6 specification. the cylinder bores adjacent to the block face, See; `Important Information - Early GT6 Mk1 Engine See; `Important Information - ALL Mk1 GT6 engine parts listed are for If your old exchange engine is an early Mk1 necessitating a particular type of head gasket, Conrods, Conrod Bearings, Flywheel etc are LATE GT6 Mk1’s (from KC5001E), unless to compare the Front Engine Mounting Plate Engine components for very early Mk1 GT6’s Original Block had Recessed Cylinder Bores. which can be identified by a ‘Tag’ which stands From LATE NB: where parts are listed as ‘For all models’, it means (from engine number KC1E to KC5000E), such necessary to re-fit the original mounting plate require a different flywheel. You will also need as, Cylinder Block, Crankshaft, Main Bearings, Early GT6 Mk1 Engines/Components (to engine number KC5000E), then you will also the parts are only suitable for Late Mk1’s (from KC5001), From Recessed or Non-Recessed Cylinder Bores? interchangeable with later MK1 engines, so due (located behind the timing cover), and it may be EARLY From Flywheel & Identification of Front Engine Plate From IMPORTANT INFORMATION IMPORTANT Original Block had Non-Recessed Cylinder Bores. Original Block had Non-Recessed Original Block had Non-Recessed Cylinder Bores. Original Block had Non-Recessed Cylinder Bores. Original Block had Non-Recessed Original Block had Non-Recessed Cylinder Bores. Original Block had Non-Recessed From DESCRIPTION REQ. QTY PART NO. ENGINES ENGINES & COMPONENTS 6K433 132107 143943 131535 107246 AED172 GPS117 RX1352 RB7050 RR1238 RR1275 RR1243 11K2846 RX1351/0 R1238SK 131535UR RX1351/OW (1) (1) (1) (For adaptor) (for adaptor 11K2846) CONVERSION SPIN-ON FILTER thus avoiding the ‘start-up rattle’. Recommended for all owners! (for remote mounting of gauge) and prevents oil draining back into the sump filter to the more efficient ‘Spin-on’ cartridge vehicle with Oil cooler fitted (1) vehicle without Oil cooler (1) Includes gauge, pipe, etc. StandardUprated (1) (1) gauge kit (1) pump housing (1) This converts the standard ‘Bowl’ & element oil type. It makes filter changing easier (& cleaner) Adaptor only (Spin-on oil filter); Oil filter cartridge onlyService kit (O’ rings) (1) Oil pressure relief valveSpring - Oil pressure valve; (1) Oil Pressure Gauge Oil Pressure & Switch pressure - or fit one of our kits! You can either guess your oil Oil pressure gauge kitIncludes gauge, pipe etc. Oil pressure and water temperature Bracket (1) Required when fitting oil pressure gauge kit if retaining low pressure warning light. Oil pressure switch (1) Adaptor - oil pipe to blockAdaptor - temp sender to water (1) ‘T’ piece (1) Washer - Oil pressure valve (1) Housing - Oil pressure valve (1) Washer (copper) DESCRIPTION REQ. QTY PART NO. 32307 HB726 GFE138 127653 127652 129917 510107 217488 217486 307039 308571 510109 137978 149776 126786 GHF331 GHF332 GEG214 GEG515 GPS117 RR1340 516375 RS1456 RR1296 TKC2006 22G2115 GEG214K SH606061 217488RK (1) (1) (1) (1) (3) (1) 8 (For bolt HB726) (Dipstick) (From eng no KC5001) (Bowl) (Rocker gear) COOLER FOR PEACE OF MIND. FIT AN OIL COOLER KIT ENGINE OIL fitting kit, filter adaptor, Important Information - Early GT6 MK1 Engines/Components. Important Information - Early GT6 Important Information - Early GT6 MK1 Engines/Components. Mk2 & Mk3 (1) Late Mk3 (1) MK1 (Late), Mk2 & early Mk3’s Mk1 (Late) With oil sealsWithout oil seals (1) (1) Oil pump & distributor (1) Kits include oil cooler radiator, Engine oil cooler kitSuitable for all vehicles. Also converts to spin-on type oil filter. Thermostat (Engine oil cooler)Not included in oil cooler kit. (1) (1) Engine oil cooler kitSuitable for vehicles fitted with standard or spin-on oil filter. (1) hoses & fittings, but not thermostat. Tube - DipstickFelt seal/washer (1) Filter elementWasher/seal (1) For setscrew SH606051 DipstickOil Filter See: Canister type oil filter & bowlComplete assembly including filter element & bolt. (1) Bowl only (1) (1) SUMP PAN & DIPSTICK Sump pan; Oil Pump & Sump Oil Pump & See: OIL PUMP & FITTINGS Oil pump assemblyA remote mounted kit for increased lubrication to the rocker gear. Oil pump body only (1) (1) Oil pump repair kitOil feed kit Oil screen/strainerBolt - Oil pump to block (1) (3) (1) Washer - Locking Sump gasket set; Oil pressure switch (1) Drive shaft & gear assembly - Sump gasket onlyOil drain plugWasher - Locking (1) (1) (23) Bush - Oil pump/distributor drive; Setscrew - Sump to block (23) DESCRIPTION REQ. QTY PART NO. 36234 6K433 DP514 123716 123715 131535 143456 137978 149776 129077 132107 107246 151134 110748 103810 119758 133803 156274 213777 215349 138791 211514 158942 100433 RV6041 RV6020 GPS117 RG1127 RG1034 WF511A RV6039R RV6018R RG1020R UKC1110 UKC8321 RV6045R TE605105 TE605105 131535UR BH607241 RG1021RR WL600071 SW605081 WB600070 RR1340 RG1021RNR 1) ( (1) (1) (2) (1) (1) (2) (2) (8) (2) (1) (a/r) (Mk1 from KC5001) (for bolt BH607241) FEED KIT (For Drain plug) (Block & head) (Cylinder block) ROCKER GEAR OIL Crankshaft/Pulley & Flywheel. (From eng No KC5001) (Sealing block to cylinder block) (Timing cover to block) (Sealing block to cylinder block) (Sealing block to cylinder block) A NEW Oil Pump MUST Be Fitted, otherwise the A NEW Oil Pump MUST Be Fitted, (Fuel pump to block); (Distributor pedestal to block) Important Information - Early GT6 MK1 Engines/Components. Important Information - Early GT6 Important Information - Early GT6 MK1 Engines/Components.

MK3 (Non-recessed bores)MK3 (Recessed bores) (1) (1) Front (1) Rear (1) Rear (Main) (1) StandardFront (Timing cover) (1) (1) UpratedLate Mk3 (1) (1) Mk1 (Late) (14) Mk2 & Mk3 (14) Mk1 (Late) - Long stud (7) Mk1 (Late) - Short studMk2 & Mk3 (7) (14) Mk1 (Late) (1) Mk2 & Mk3 (1) Mk1 (Late) & Mk2 Mk1 (Late) & Mk2Mk3 (2) (2) Mk1 (Late), Mk2 & early Mk3’s For Engine Oils & Antifreeze please refer to Accessories. For Engine Oils & Antifreeze please Mk1 (Late) (1) Mk3 (1) Mk3 Mk1 Mk2 (1) Mk2Mk3 (1) (1)

ee: the rocker gear. Oil feed kit (1) increased lubrication to See ‘Accessories’ for full details. A remote mounted kit for Stud Drain plug Bush - Oil pump/distributor drive; Stud Engine lifting eye; Washer - Fibre Screw Gasket Oil pressure switchOil pressure relief valveSpring - Oil pressure valve; Washer - Oil pressure valve (1) (1) Housing - Oil pressure valveOil seal - Crankshaft; (1) (1) Dowel Front sealing blockFiller (1) Washer - Plain (14) For Engine Oils & Antifreeze please refer to Accessories. Nut (Cylinder head stud); Gasket - Engine plate to blockRear engine plate (1) Cylinder linerStud - Cylinder head to block; (1) (6) Washer - Locking Cyl head stud - all models Bolt - Main bearing cap (8)

See: See also: Front engine plate; Cylinder Block Components Short engine - Reconditioned (Exchange); Short engine - Reconditioned S Note: Null & Void. Warranty/Guarantee becomes Short Engine For Engine Oils & Antifreeze please refer to Accessories. For Engine Oils & Antifreeze please Engine installation kit (Full engine); Engine installation oil filter etc. Includes gaskets,

Full engine (Unleaded) - Reconditioned (Exchange); - Reconditioned Full engine (Unleaded) Exchange Engines are Bench Tested. All Reconditioned Full Engine Full Engines/Components. - Early GT6 MK1 Information See: Important Core plug set DESCRIPTION REQ. QTY PART NO. 508978 146454 119813 127265 149976 158112 127262 107401 RTC2428 UKC2598 149976.020 149976.030 149976.040 149976.060 158112.020 158112.030 158112.040 158112.060 127262.020 127262.030 127262.040 127262.060 RTC2428.020 RTC2428.030 RTC2428.040 RTC2428.060 (6) (6) (12) (Flat Top) (Domed Top) (Per engine); (Per engine); and MUST be replaced ‘like for like’. and MUST be replaced (includes 6 pistons c/w rings & gudgeon pins); (includes 6 pistons IMPORTANT NOTE- PISTONS: IMPORTANT (includes 6 pistons c/w rings & gudgeon pins); (includes 6 pistons c/w rings & gudgeon Cylinder Block & Components & Crankshaft/Pulley Block & Components Cylinder (Reconditioned) (Gudgeon pin) (Hollow) in this parts catalogue (to help identify factory Important Information - Early GT6 MK1 Engines/Components. Information - Early Important Standard size+ 0.030” Oversize+ 0.040” Oversize+ 0.060” Oversize (1) (1) (1) (1) Standard size+ 0.020” Oversize+ 0.030” Oversize+ 0.040” Oversize+ 0.060” Oversize (1) (1) (1) (1) Standard size (1) + 0.020”Oversize+ 0.030” Oversize+ 0.040” Oversize+ 0.060” Oversize (1) (1) (1) (1) Standard size (1) + 0.020” Oversize+ 0.030” Oversize+ 0.040” Oversize+ 0.060” Oversize (1) (1) (1) (1) (1) + 0.020” Oversize (1) the vehicle was new and not subsequent replacements. COMPONENT & COMMISSION NUMBERS ISTON SETS ISTON SETS ‘Flat-top’ & ‘Domed-top’ Pistons are NOT interchangeable, ‘Flat-top’ & ‘Domed-top’ Where commission and/or component numbers are quoted ee: specification changes), they refer to components/parts when DESCRIPTION REQ. QTY PART NO. Piston set Piston set Small end bushDowel (6) Gudgeon PinCirclip CONROD MK1 (Late from KC5001), MK2 & MK3 only. Conrod (6) For Con rod (Big end) bearings - See Crankshaft & Flywheel section. P PISTON SETS PISTON RING SETS (for Hepolite Flat Top pistons 149976) Piston ring set PISTON RING SETS (for Domed Top pistons 158112) Piston ring set Piston & Conrod & Piston S See also: & Flyweel. Bolt - Conrod (12) DP619 133238 140419 133235 119390 119389 133234 148042 211514 133244 154380 201350 145275 145276 UKC4254 GFB11162 GFB11150 GCB11125 GCB11088 GCB11125 BH610161 (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) (4) (1) (a/r) (a/r) 9 (Recon/exchange) (To KC/KD7905E) (From KC/KD7906E) (Sprocket to crankshaft) (Use as required) (Use as required) (Cooling fan) (To KC76718) (From KC76719) (Front oil seal) (Adaptor & pulley to crankshaft) (Flywheel to crankshaft) (Flywheel to crankshaft) (Pulley & adaptor to crankshaft) 0.004” Mk1 (Late) Mk2 Mk2 Mk3 (1) Mk1 (Early) Mk1 (Late) & Mk2Mk1 (Late) Mk3 (1) (1) 0.006” Dowel Sleeve Oil throwerSprocket - CrankshaftWoodruff Key Shim - Crankshaft sprocket; (1) (1) Rear engine plate (1) Bolt Dowel Adaptor Fan belt; FLYWHEEL & FITTINGS Flywheel assembly only. Mk1 Late (from KC5001), Mk2 & Mk3 Ring gearBolt (1) CRANKSHAFT PULLEY & FITTINGS & PULLEY CRANKSHAFT pulley/damper; Crankshaft DESCRIPTION REQ. QTY PART NO. 143456 156530 105321 144194 308034 105143 GEG214 RTC1752 RTC1751 308034R 308034N GEG214K UKC1110 - BHM1366 BHM1366.05 BHM1366.030 BHM1366.015 128391Set - 144194.010 144194.020 144194.030 144194.040 144194.050 144194.060 RTC1752.010 RTC1751.010 RTC1751.020 RTC1751.030 RTC1751.040 RTC1751.060 RTC1752.020 RTC1752.030 RTC1752.040 RTC1752.060 128391.010Set 128391.020Set 128391.030Set 128391.040Set - (1) (1) (1) (1) (1) (1) (1) (Except early Mk1); (Except early (Includes shells) (Timing cover) (Main) (Rear main oil seal) (Includes shells & thrust washers) (Includes shells & (Less shells) Piston & Conrod Piston & (Seal housing to block) (Late - from KC5001E), MK2 & MK3 (Late - from KC5001E), MK2 (Early - to eng no KC/KD5000E)- (Early - to eng no KC/KD5000) (Late - from KC5001), Mk2 & Mk3 Important Information - Early GT6 MK1 Engines/Components. Early GT6 MK1 Information - Important Standard size+ 0.010” Oversize• (1) (1) Without oil seals (1) With oil seals (1) Rear Reconditioned Reconditioned Standard size+ 0.010” Oversize (1) (1) Pilot (Spigot) bushPilot (Spigot) (1) + 0.020” Oversize+ 0.030” Oversize+ 0.040” Oversize+ 0.050” Oversize+ 0.060” Oversize (1) (1) (1) (1) (1) New Front Standard size+ 0.005” Oversize (1pr) (1pr) + 0.010” Oversize (1) Standard size (1) + 0.015” Oversize+ 0.030” Oversize (1pr) (1pr) + 0.040” Oversize+ 0.060” Oversize (1) (1) + 0.020” Oversize+ 0.030” Oversize (1) (1) + 0.020” Oversize+ 0.030” Oversize+ 0.040” Oversize (1) (1) (1) •Also available in Vandervell, please enquire. + 0.020” Oversize•+ 0.030” Oversize+ 0.040” Oversize+ 0.060” Oversize (1) (1) (1) (1) Standard size (1) + 0.010” Oversize (1) New ee: DESCRIPTION REQ. QTY PART NO. Mk1 Housing Gasket Sump gasket set; Main bearing set; Mk1 Oil Seals - Crankshaft; Thrust washers (Pair); Mk1 Big-end bearing set (Conrod); Mk1 S See also; & BEARINGS CRANKSHAFT models) Crankshaft (All DESCRIPTION Flywheel & Crankshaft REQ. QTY PART NO. ENGINE COMPONENTS DESCRIPTION QTY REQ. PART NO. DESCRIPTION QTY REQ. PART NO. DESCRIPTION QTY REQ. PART NO. ENGINE COMPONENTS VALVES & GUIDES Engine Gaskets & Oil Seals ROCKER GEAR OIL Inlet valve; See: Important Information - Early GT6 MK1 Engines/Components. FEED KIT Mk1 (Late) (6) 122257 Head gasket set; A remote mounted kit for Mk2 & Mk3 (6) 146128 Mk1 (Late) (1) GEG115 increased lubrication to Exhaust Valve; Mk2 (1) GEG198 the rocker gear. Mk1 (Late) (6) 159873 Mk3 (Non-recessed) (1) GEG198 See ‘Accessories’ for full details. Mk2 (6) 149658 Mk3 (Recessed) ‘Tag’ (1) AJM1193 Mk3 (6) 159873 Head gasket only; Oil feed kit (1) RR1340 Valve guide - Inlet; Mk1 (1) 207102 Mk1 (Late) (6) 119622 Mk2 (1) GEG346 Mk2 & Mk3 Mk3 (Non-recessed) (1) GEG346 Standard (6) 58923 Mk3 (Recessed) ‘Tag’ (1) GEG387 ROCKER SHAFT & FITTINGS Uprated - bronze (6) 58923UR Rocker cover gasket (1) GEG413 Oil feed kit (Rocker gear) (1) RR1340 Valve guide - Exhaust; Inlet/exhaust manifold gasket (Manifold to head); A remote mounted kit for increased lubrication to the rocker gear. MK1 (Late) (1) AJM613 Overhaul kit (Rocker gear) (1) RR1312 Mk1 (Late) (6) 119622 MK2 & MK3 (1) GEG682 Inc rocker shaft, 5 shaft springs & 12 rocker arms. Mk2 & Mk3 Exhaust down pipe/flange gasket; Rocker shaft assy (recon) (1) 214559RA Standard (6) 111869 Complete, ready to fit, all models. Uprated - bronze (6) 111869UR MK1 (Late) (1) GEG701 Rocker shaft only; MK2 & MK3 (1) GEG718 Valve seat insert - Inlet; Mk1 (Late) (1) 214562 Timing cover gasket (To engine plate) (1) 211126 Mk1 (Late) (6) 130814 Front engine plate to block gasket (1) 215350 Mk2 & MK3 (1) 214559 Mk2 (6) 146496 Sump gasket set; Collar* (Rocker shaft end) (2) 104838 Mk3 (6) 159903 With oil seals (1) GEG214K Spring* (For collar 104838) (2) 105322 Valve seat insert - Exhaust; Without oil seals (1) GEG214 Mills pin* (For collar 104838) (2) 500975 MK1 (Late) (6) 130813 *Only fitted to Mk1 models. Sump gasket only (1) GEG515 Mk2 (6) 146497 Plug+ (Rocker shaft end) (2) 137811 Water pump gaskets; Mk3 (6) 159904 Split pin+ (For plug 137811) (2) PC10 Water pump to housing (1) 138701 +Only fitted to MK2 & MK3 models. Housing to cylinder head (1) 138792 Pedestals - Rocker shaft; VALVE SPRINGS & PUSH RODS Thermostat gasket (1) GTG103 MK1 (Late from KC5001)- Valve spring set - Double springs; Fuel pump to block gasket (1) 138791 Number 1 (Drilled) (1) 128425 Mk1 (Late) (Inner & outer springs) (1) RV6009 Oil Seal - Crankshaft; Numbers 2, 3, 4, 5 & 6 (5) 128424 Mk2 (Inner & outer springs) (1) RV6001 Front (Timing cover) (1) UKC1110 MK2 & MK3- Rear (Main) (1) 143456 Valve springs (Double type); Number 1 (Drilled) (1) 145867 Core plug set (Block & head) (1) RG1034 Mk1 (Late) Inner (12) 102564 Numbers 2, 3, 4 & 5 (4) 144974 Mk1 Outer (12) 121251 Number 6 (1) 145869 Mk2 Inner (12) 102564 Cylinder Head & Fittings Shim for above (If req) (6)144973SHIM Stud - Pedestal to head (6) 132495 Mk2 Outer (12) 149633 See: Important Information - Early GT6 MK1 Engines/Components. Valve spring set - Single springs; Nut (For stud 132495) (6) GHF202 See: ‘Fuel System’ & ‘Exhaust System’ for manifold fixings. Washer (For stud 132495) (6) WP184 Mk3 (1) RV6079 Cylinder head (Unleaded)- Reconditioned (Exchange); Rocker arm - Inlet (6) 109023 Valve springs (Single type); Complete with valves & springs, but less rockers/shaft/pedestals. Mk3 (12) 136487 Mk1 (Late) (1) RG1161R Rocker arm - Exhaust (6) 109024 MK2 & MK3 (1) RG1022R Springs - Rocker shaft (5) 119313 Valve spring collars (Upper) (All models); For Head Gasket & Gasket Sets Refer to ‘ENGINE GASKETS & OIL SEALS’. Fit on rocker shaft between rocker arms. Inlet valve only (6) 111870 Stud - Cylinder head to block; Screw - Tappet adjusting (12) 109495 Exhaust valve only - Mk1 (Late) - Long stud (7) 119758 Nut - Locking (For screw 57109) (12) 57110 Inner (6) 111870 Mk1 (Late) - Short stud (7) 133803 Outer (6) 128335 Mk2 & Mk3 (14) 156274 OVERHAUL KIT - Valve spring collars (Lower) (Exhaust & inlet); Nut (Cylinder head stud); ROCKER GEAR Mk1 (Late) (14) 110748 Mk1 (Late) (Exhaust & inlet) (12) 111871 Mk2 & Mk3 Mk2 (Exhaust & inlet) (12) 149717 Standard (14) 103810 Mk3 (Exhaust & inlet) (12) 105118 Uprated (14) 103810X Split collets (Pairs) (12) 106663 Washer - Plain (14) WB600070 Push Rods; Cyl head stud - all models MK1 (Late) (12) 129058 Water delivery tube (MK1 only) (1) 210829 MK2 & MK3* (12) 151073 Core plug set (Block & head) (1) RG1034 *MK3 up to engine number KE/KF10000. Plug - Tapered (Head side) (1) 22G2115 MK3 (From KE/KF10001) (12) 149513 Screw - Oil feed (Rear of head) (1) SH605041 Cam follower (All) (12) 143552 Washer - Copper (For screw 101022) (1) 500469 Tube - Push rod sealing (Mk1 only) (12) 104826 ROCKER COVER & FITTINGS Rocker cover - standard (steel) Recon - powder coated. MK1 (Late) & MK2 (1) 216756R Mk3 (to KE 10,000) (1) 210908R Mk3 (from KE 10,001) (1) 214816R Rocker cover - alloy (see photo) All models (inc. cap). Note: due to minimal clearance between bonnet & rocker cover, use thin rocker cover gasket GEG413T. Engine and gearbox mountings should be in good condition (to minimise engine lift on acceleration). Also engine mountings should be fitted to rear side of turret plates. Alloy finish (1) TKC378A Black crackle finish (1) TKC378AP Rocker cover gasket Standard (1) GEG413 Thin (use with Alloy cover) (1) GEG413T Oil filler cap; for Standard cover (1) GZC1400 ALLOY ROCKER COVER for Alloy cover (1) 214814AC ALLOY FINISH - TKC378A Stud (Centre and rear of rocker cover) (2) 105123 BLACK CRACKLE FINISH - TKC378AP Nut - Lower (For stud 105123) (2) GHF201 NOTE: USE THIN GASKET GEG413T Nut - Upper/outer (For stud 105123) (2) GHF272 & REFER TO TEXT FOR FITTING INFORMATION. Bolt (Special) (1) BH605321 Washer - Plain (3) GHF301 Washer - Fibre (3) WF508 10 125217 516788 505704 209504 GBF103 GHF332 RX1327 RX1326 GMC205 500201A 13H6639 556508A GRK1029 SH605071 209504GR GMC205ALT 3059374GR (1) (1) (1) (1) (1) (2) (1) (1) (a/r) (a/r) (a/r) (alternative) (alternative) (1 litre) do not mix with standard fluid. (Slave cylinder) does not absorb moisture. (0.5 litre)* (1 litre)* (Master cylinder) Note: (Master cylinder) (Slave cylinder) (Slave cyl mounting) (Slave cylinder) Also, it won’t harm paintwork if spilt. Braided pipe Steel pipe (1) Braided pipe (Master cylinder to slave cyl) SILICONE CLUTCH/BRAKE FLUID Unipart (DOT 3) LHD Original specification alternativeNon-original (1) (1) RHD *Do not mix with standard fluid. Silicone Silicone strenuous braking conditions tends not to boil). Unlike normal clutch/brake fluids, Silicone fluid This will avoid corrosion in the system (and under DESCRIPTION REQ. QTY PART NO. Filler capGaiter/boot Bleed screw Setscrew (1) Washer - Locking (2) Clutch/brake fluid; Clutch slave cylinderClutch slave Repair kit Push rod (1) Repair kit For setscrew SH605071 Pipe Clutch Hydraulics Clutch master cylinder; Clutch 143707 126786 126785 500974 126784 104939 137978 149776 150881 122289 GHF332 GCC228 GCP140 GCP177 RG1018 RX1385 GRB209 UKC1937 SH505061 (1) (1) (1) (1) (6) (6) (3) 11 (Borg & beck) (Borg & beck) (For bolt SH505061) (All except early Mk1) (Clutch/brake) (Borg & beck) (Includes NEW OE Spec’ cover, plate & bearing); (Includes NEW OE Spec’ cover, plate ‘Gearbox & Overdrive - Clutch Housing & Operation’. ‘Gearbox & Overdrive - Clutch Housing (Clutch cover to flywheel) (Clutch cover to flywheel) Important Information - Early GT6 MK1 Engines/Components. Important Information - Early GT6 Oil pump/distributor (1) early Mk3’sMk1, Mk2 & (1) Late Mk3 (1) Mk1 & Mk2 (2) Mk3 (2) Mk1 (Late), Mk2, Mk3 (1) Clutch alignment toolClutch cover (1) Clutch driven plate Clutch driven plate* Washer - Locking Dowel Pedal rubbers Clutch release bearing carrierBolt (1) NOTE: For Clutch Release Mechanism, please refer to; ‘Clutch Housing & Operation’ under ‘GEARBOX & OVERDRIVE’ section heading. Clutch See: See also: Clutch kit *NOTE: For use with Laycock type clutch covers only. Release bearing DISTRIBUTOR & OIL PUMP DRIVE OIL PUMP & DISTRIBUTOR assembly- & gear Drive shaft shaftGear - Drive shaftPin - Gear to Pedestal - Distributor (0.006”)Shim - Pedestal drive; Bush - Oil pump/distributor (1) (a/r) (1) (1) DESCRIPTION REQ. QTY PART NO. WP18 35960 36411 42425 33214 43752 159656 145199 133284 133285 122689 105131 100500 105114 119389 307621 311399 211126 215350 217790 143552 TN3209 GHF332 GHF201 GHF332 GHF120 GHF301 GHF332 GHF201 GHF223 GHF302 GHF333 GHF301 GHF106 RH5003 307621R 311399R UKC8330 UKC1110 SH605071 SH606061 PS103121 SH605071 RR610040 (4) (4) (1) (2) (2) (2) (4) (4) (2) (4) (4) (4) (1) (8) (8) (4) (2) (4) (1) (1) (1) (1) (2) (1) (2) (1) (2) (2) (1) (1) (1) (1) (1) (12) (Reprofiled) (Exchange) (For setscrew SH605071) (For setscrew SH606061) (New) (For nut TN3209) (New) (Reprofiled) (Exchange) (Camshaft to block) (For bolt GHF106) (Engine mounting to bracket) (For pin 33214) (Sprocket to camshaft) (All) (Simplex) (Tensioner to anchor plate) (Mounting to gearbox/bracket) (Mounting to gearbox/bracket) (For setscrew GHF120) (Mounting to gearbox/bracket) (Mounting to overdrive unit) (Mounting to platform/bracket) (Mounting bracket to cyl block) (Sprocket to camshaft) (Locating plate 105114 to block) (Mounting to gearbox/bracket) (Mounting to gearbox/bracket) (For pin 33214) (Crankshaft front) (Mounting to chassis) (For anchor plate 453572) (Mounting to chassis) Plain Right hand Left hand Plain Locking Locking MK2 & Mk3 MK1 (Late) MK2 & *Mk3 Timing cover to engine plateEngine plate to block (1) (1) MK1 (Late) Setscrew Nut - Plain OVERDRIVE MODELS Setscrew Washer; Nut - Plain Bolt Nut - Locking Mounting bracket; Setscrew Nut - Locking Washer - Plain Washer - Locking Washer; Gearbox/overdrive mounting (Rubber) Gearbox Mountings NON-OVERDRIVE MODELS Gearbox mounting (Rubber) (2) Washer - Locking Spacer Engine Mountings Engine mounting (Rubber) (2) Sprocket - CamshaftLocking plate Locating plate Setscrew (1) Split pin Setscrew Sprocket - CrankshaftTensioner - Timing chainPin (Drilled) Washer - Flat (1) (1) Anchor plate - TensionerRivet (1) Cam follower Cam follower Oil seal Gasket; TIMING COVER & FITTINGS Timing cover (1) Timing chain TIMING CHAIN Timing chain kit (All) & gasket. Includes timing chain, oil seal, tensioner (1) See: Important Information - Early GT6 MK1 Engines/Components. - Early GT6 Information See: Important Spec); Camshaft (UK DESCRIPTION Gear & Timing Camshaft REQ. QTY PART NO. ENGINE COMPONENTS ENGINE/GEARBOX MOUNTINGS DESCRIPTION QTY REQ. PART NO. DESCRIPTION QTY REQ. PART NO. DESCRIPTION QTY REQ. PART NO. COOLING & HEATING

COOLING SYSTEM CAPACITY Cooling system (Inc Heater/Expansion bottle) = 11 pints (6.2 litres)

Water Pump & Thermostat Radiator & Hoses Inlet Manifold Water

Water pump (Includes pump to housing gasket); Radiator - Reconditioned (Exchange) (1) 311873R Pipe & Hoses Mk1 & Mk2 (1) GWP200 Drain tap (1) 132565 Mk3 (1) GWP201 Kenlowe electric fan kit (1) RB7065 Hose kit (Per vehicle) (1) RG1128 Includes all radiator/heater hoses & clips. Gaskets (Water pump); Anti-freeze (Unipart); Hose (Water pump to inlet manifold) (1) 137876 Water pump to housing (1) 138701 1 Litre (a/r) GAC2018 Adaptor (Hose to water pump) (1) 138530 5 Litre (a/r) GAC2019 Housing to cylinder head (1) 138792 Fibre washer (For adaptor 138850) (1) WF524 Holts Radweld - 250ml (a/r) RX1508 Stud (Water pump to housing) (3) TE605105 Adaptor* (Hose to inlet manifold-front) (1) 138810 Nut (For studs TE605105) (3) GHF201 Radiator cap *Mk1 (Late) & Mk2 models only. Washer - Locking (For studs TE605105) (3) GHF332 13lb (1) GRC114 Water pipe (Heater return) (1) 217467SS Bolts; 7lb (1) GRC112 Adaptor (Pipe to water pump) (1) 101343 Housing to head (1) BH605261 Hose kit (Per vehicle) (1) RG1128 Sleeve nut (For adaptor 101343) (1) 101302 Housing to head (1) BH605201 Includes all radiator/heater hoses & clips. Compression olive (For nut 101302) (1) TL11 Top hose (1) GRH533 Housing to head (1) BH605181 Hose (Pipe to inlet manifold-rear); Bleed hose (1) GRH553 Washer - Locking (For above 3 bolts) (3) GHF332 Mk1 (Late) & Mk2 (1) 140986 Bottom hose (1) GRH513 Temperature transmitter (1) GTR108 Mk3 (1) 149699 Hose clips; Thermostat (82o) (1) GTS104 Adaptor (‘Y’ adaptor -rear of manifold) (1) 145407 for Top & bottom hoses (4) GHC1015 (Adaptor 145938 to manifold) Gasket (Thermostat housing) (1) GTG103 Banjo bolt (1) 145155 for Bleed hose (2) GHC709 Housing - Thermostat (1) 212971 Fibre washer; Radiator cowl (Board) (1) 818879 Large hole (for bolt 145155) (1) WF550 Bolt (Thermostat housing) (2) GHF104 Valance board (Engine bay); Small hole (for bolt 145155) (1) WF534 Washer - Locking (For bolt GHF104) (2) GHF332 Right hand (1) 905222 Hose clips (a/r) GHC507 Left hand (1) 910045 For hoses 137876, 140986, 149699 Clip (Mk3 only, wiring harness to valance boards) (2) 153227 HEATER WATER VALVE KENLOWE ELECTRIC FAN KIT - RB7065 Overflow bottle (1) 137632 Cap (Overflow bottle) (1) 137743 Hose (Overflow-radiator to bottle) (1) ULC2122 Strap/clamp (Overflow bottle) (1) 137624 Bracket (Overflow bottle) (1) 145671 Setscrew (Bottle bracket to body) (2) SH604041 Washer; Plain (For setscrew SH604041) (2) WC701121 Locking (For setscrew SH604041) (2) GHF331 Nut (For setscrew SH604041) (2) GHF200

Heater/Controls & Heater Hoses Cooling Fan & Coupling HEATER, WATER VALVE & HOSES Heater unit - Recon (Exchange) (1) 911590R Hose kit (Per vehicle) (1) RG1128 Fan belt; Includes all radiator/heater hoses & clips. Mk1 (To KC/KD7905E) (1) GCB11125 Heater water valve; Mk1 (Late) (From KC/KD7906E) (1) GCB11088 Mk1 (Late) & Mk2 (1) 565755 Mk2 (To KC76718) (1) GCB11125 Mk3 (1) 724022 Mk2 (From KC76719) (1) GFB11162 Heater hoses: Mk3 (1) GFB11150 Water valve to heater (Feed); Kenlowe electric fan kit (1) RB7065 ENGINE OIL COOLER without Brake servo (1) 613488 FIT AN OIL COOLER KIT FOR PEACE OF MIND. Cooling fan (Standard - 8 blade) (1) 308353 with Brake servo (1) 159360 Kits include oil cooler radiator, fitting kit, filter adaptor, Fasteners - Standard cooling fan; Heater to inlet manifold (Return) (1) GZA983 hoses & fittings, but not thermostat. Connects to ‘Y’ adaptor 145938. Bolt (Fan locating) (4) SH605101 Hose clips (a/r) GHC507 Tab washer (2) 107857 For hoses 613488, 159360, GZA983 Bush Engine oil cooler kit (1) 516375 Suitable for vehicles fitted with standard or spin-on oil filter. HEATER CONTROL CABLES Rubber (8) 108496 Engine oil cooler kit (1) RR1296 Poly (8) 108496P Suitable for all vehicles. Also converts to spin-on type oil filter. Heater temp’ control cable (1) 625687 To water valve Sleeve (Steel) (4) 108499 Thermostat (Engine oil cooler) (1) RS1456 Control cable (Heat/air distribution) (1) 624193 Not included in oil cooler kit. Washer (4) GHF301 Resistor (For fan control) (1) 7H6926

12 59191 WF513 138791 100433 154213 154211 152855 154216 154934 213577 624155 138530 156876 151658 143323 159230 RG1159 GHC406 GHC406 GFE7004 27H7758 TE605105 AEU2760A (1) (1) (1) (1) (1) (1) (1) (1) (4) (4) Manifold to servo (1) (Adaptor to manifold) (All models) (Tank to engine) (Breather valve) (Replacement type) (For hoses 154216/152855) (For hoses 156876/143323) (Original AC fuel pump) (Locates in inlet manifold) (Adaptor to breather valve) (Breather valve to rocker cover) Mk1 & Mk2Mk3Metal clip (Single) (2) (a/r) (2) Plastic clip (Double) (a/r) FrontRear (1) (1) FUEL PUMP & FILTER DESCRIPTION REQ. QTY PART NO. Gasket - Pump to blockStud - Pump to block; (1) Fuel pipe kit Fuel filter (In-line)Clip - Fuel/Brake pipe; (1) All MK3 vehicles FROM KE10001E Hose - Rocker cover to ‘T’ piece‘T’ piece (1) Hose - Carb to ‘T’ piece; Adaptor - Hose to carbsHose clips Vacuum hose - (2) (1) Repair kit Fibre washer Hose Breather valve assemblyDiaphragm (1) Hose clips Fuel pump Fuel Pump & Filter Engine Breather All vehicles (When fitted) UP TO KE10000E Adaptor Comprises diaphragm, lower plunger & top cover. Hose 57950 61917 RL1575 141648 148006 616012 159763 514976 520027 156353 214414 215496 215497 214413 402694 517792 137482 RX1347 RX1348 RX1349 RX1346 RM8230 GFE1051 517001Clip (1) (2) (1) (1) (1) (1) (a/r) (Mk3 only) 13 ; (1 Litre) (K&N filters) (K&N filters) (Choke cable) K&N AIR FILTERS (To KE/KF20000) (From KE/KF20001) When fitting ‘K&N’ air filters, Sports exhaust and/or (Air cleaner body) (Cable to carb lever) PairEach (1) (2) Mk1 & Mk2 (2) 57cc Sachet250ml Bottle400ml AerosolMk3 (a/r) (a/r) (a/r) (2) Mk1Mk2 & Mk3 (1) (1) Mk3 (RHD & LHD) (1) Mk1Mk2 & Mk3 (1) (1) Mk3 Mk1 & Mk2Mk3 (1) Carb needle Cleaning fluid Use when K&N and tubular manifolds fitted. These filters will give improved engine breathing & performance. Note; Tubular extractor manifolds, the carb metering needles may require changing and/or the carbs re-adjusted. K&N Air filter Use to clean elements when servicing. Element oil Use to re-oil filter elements after cleaning. CARB OVERHAUL COMPONENTS OVERHAUL CARB 4 fit between elements, back plate & cover, 2 fit between air box & carbs. Air intake pipe - Flexible Air Cleaner - Standard Air filter elementAir cleaner assembly; (2) Accelerator & Choke Accelerator Cables Accelerator Cable; Gasket - air cleaner (6) Choke cable; Clip Spring - Throttle return; Air cleaner front coverAir cleaner back plateSeal (1) (1) Grommet DESCRIPTION REQ. QTY PART NO. 129383 513689 605801 515112 516988 516945 521153 520013 520449 514976 512317 517453 520404 512311 520027 137882 147660 137881 147659 514470 516990 515724 517864 513700 515721 514964 513684 513717 513717 520015 12882A RG1299 RG1300 RG1301 RG1296 RG1297 RG1298 RX1222 RG1165 RH5220 606819A 605847A 605833A NKC125J RG1039R (2) (4) (2) (2) (2) (2) (2) (2) (2) (2) (2) (2) (8) (1 pr) CD150CD150S 3092 CD150SE 3223 3335 CD150SE 3432 (Pair) (Screw in top) (per vehicle); (per carb); (Per carb); (Carb to manifold); (Float assembly) (Throttle disc) (Vehicles to KE10,000) (Vehicles from KE10,001) (Vehicles to KE10,000) (Vehicles from KE10,001) (To KE10,000) (From KE10,000) (All models) (All models) (Float chamber) (Metering needle) (For damper/rod 515112) (Carb to insulator to manifold); (Butterfly to spindle) (Carb top to main body) RearFront or rearFrontRear (2) (1) (1) (1) Front (1) Stromberg Carb type Carb Stromberg (Float chamber) Mk3 Mk3 Mk1 & Mk2 (2) Mk3Were K&N and extractor manifold fitted. (2) Were K&N and extractor manifold fitted. Mk2Mk3 (2) (2) Mk1 (2) Mk1 (2) Mk2Mk3 (2) (2) Mk1 & Mk2Mk1 (4) (2) Mk1 & Mk2Mk3Mk3 (2) Mk2Mk3 (2) (4) (2) (2) Mk2Mk3 Mk3 (2) Mk2 & Mk3 (2) Mk2 Mk3 Mk1Mk1 & Mk2 (2) Mk1 (2) Mk1 (2) identification to Models; identification Mk1 Mk2 Mk3 Mk3 Model Carb Type Carb No Screw Carb overhaul kit Included in gasket kit 516990. Plug ‘O’ ring Including items in service kit plus gaskets, butterflys & spindles. Including diaphragm, jet orifice, needle valve & ‘O’ rings. Including ‘O’ rings. Available for Mk1, Mk2, Mk3 (to KE10,000) Available for Mk1, Mk2, Mk3 and Mk3 (KE 10,000 on). Carb adjusting tool (1) Components & Fittings Components ‘Cooling & Heating’. For Inlet manifold fittings, see STROMBERG CD 150 Carbs - Reconditioned Studs - Carb to manifoldInsulator block (4) Carburettors/ Screw ‘O’ ring Spring - DamperDiaphragm (CD 150)Metering needle; (2) (2) Jet (orifice) Needle valveFloat assembly Gasket - Float chamber (2) ‘O’ ring Throttle spindle; (2) Damper/rod/piston Gasket Carb gasket kit Carb service kit Butterfly Pivot pin DESCRIPTION REQ. QTY PART NO. FUEL SYSTEM DESCRIPTION QTY REQ. PART NO. DESCRIPTION QTY REQ. PART NO. DESCRIPTION QTY REQ. PART NO. FUEL SYSTEM Fuel Tank & Fittings FUEL PIPE KIT & TANK SENDER

Fuel tank Refer to reconditioned (customers own unit) where new tanks are unavailable. Mk1 (1) 307325 Mk2 (1) 308678 Mk3 (early) (1) 312411 Mk3 (late) (1) 311341 Fuel sender unit; (inc. rings & seals) Mk1, Mk2 & Mk3 (Mk3 to KE/KF20,000) (1) 215468 Mk3 (From KE/KF20,000) (1) 312415 Retaining ring (Sender unit) (1) ARA1501 Seal (Sender unit) (1) ARA1502 Fuel pipe kit (All models) (Tank to engine) (1) RG1159 Fuel filter (In-line) (1) GFE7004 Clip - Fuel/Brake pipe; Metal clip (Single) (a/r) 59191 Plastic clip (Double) (a/r) 624155

Fuel Cap

Filler cap; Mk1 & Mk2 (Non-Locking) (1) 725117 Mk1 & Mk2 (Locking) (1) 571086 Mk1 & Mk2(Locking - lozenge shaped) (1) GAC6001X Mk3 (Locking) (Complete with keys) (1) 718750 Flap Seal (lid); Mk1 & Mk2 (1) 718738 Mk3 (1) 725414 Gasket/Grommet - cap to body; Mk1 & Mk2 (1) 650247 Mk3 (1) 619122 FUEL CAPS FOR ALL MODELS

14 58258 105124 105125 100498 GHF201 GHF332 GHF333 DS3112 RG1173 RG1175 RG1145 RG1176 RG1024 RG1017 TE605105 GEX3216SS GEX3403SS GEX3483SS GEX1266SS GEX6039SS GEX1480SS GEX1440SS GEX1680SS (4) (3) (6) (1) (1) (1) (1) (1) (1) (1) (1) (1) Mk2 & Mk3; Mk2 & (Exh manifold only to head) (Exh manifold only (Stainless steel) (Stainless steel) (Stainless steel) (Special) (2) (Standard rear silencer) (Standard rear silencer) (Standard rear silencer) (For full system) (For full system) (For full system) • • • in this parts catalogue (to help identify factory in this parts catalogue (to help These items also locate the inlet manifold. Stud Nut*Dowel (3) Washer - Locking*Nut* (3) (10) Washer - Plain* (10) Clamp (Special)* (6) *These items locate exhaust & inlet manifolds to head. *These items locate Stud • Stud - Outer Rear silencer & twin tailpipes Rear silencer & twin tailpipes Rear silencer & single tailpipe Intermediate pipe & silencer (1) Intermediate pipe & silencer (1) Front pipeFront pipe (1) Front pipe (1) (1) the vehicle was new and not subsequent replacements. COMPONENT & COMMISSION NUMBERS COMPONENT & COMMISSION Where commission and/or component numbers are quoted Where commission and/or component specification changes), they refer to components/parts when DESCRIPTION REQ. QTY PART NO. Manifold to cylinder head - to cylinder Manifold Mk2 GT6 Mk3 GT6 Fitting kit Fitting kit Fitting kit Full system Full system Exhaust Systems Standard MILD STEEL EXHAUSTS Most mild steel exhausts are no longer available, having been discontinued by all the major manufacturers. Please refer to our Price Guide using the ‘GEX’ part - number prefix (see below) - without an ‘SS’ suffix for current price and availability of mild steel exhaust components. We do offer - from stock, a full range of Stainless Steel exhausts (at very affordable prices!), which will ensure long exhaust life and enhance the value of your vehicle. STAINLESS STEEL EXHAUSTS (Standard) Our standard Stainless Steel exhausts carry a ‘Lifetime’ guarantee. See also: Sports Exhaust Systems. Mk1 GT6 Full system 100498 105124 119324 123760 123761 129619 105124 127398 GHF333 GHF333 GHF332 GHF201 GHF333 NT606041 BH606141 (6) (2) (2) (2) (2) (2) (6) (1) (1) (1) (2) Mk1; (For 129619) (For 129619) 15 (For BH606141) • (For 105124) (Manifold to head) (For BH606141) (For 105124) (Exh manifold only to head) (Exh manifold only (Special) (For stud 105124) • Special) (1) ( (Inlet manifold to exh manifold) • • (For 105124) These items also locate the inlet manifold. Washer - Plain Washer - Plain Clamp*Plate*Washer - Locking (6) (6) Nut *These items locate exhaust & inlet manifolds to head. *These items locate exhaust & inlet Dowel Nut - Lock • Stud - Outer Stud - Top/outer Washer - Locking Washer - Plain* Washer-Spherical* Stud Nut - Plain Bolt* (6) Manifold to cylinder head - to cylinder Manifold DESCRIPTION REQ. QTY PART NO. 115696 515369 108951 GHF332 GHF333 GEG682 GEG701 GEG718 AJM613 306483R 308290R TE605105 (3) (3) (3) (3) (For TE605105) STANDARD STAINLESS SYSTEM MK2 - RG1145 (For 115696) STANDARD STAINLESS SYSTEM MK3 - RG1024 (For 115696) (For TE605105) Sports Exhaust Systems. Sports Exhaust StudNut (3) Washer Washer-Locking Stud (3) Nut STANDARD STAINLESS SYSTEM MK1 - RG1173 Mk2 & Mk3 - Mk1Mk2 & Mk3 (1) (1) Mk2 & Mk3 (1) Mk1 (1) Mk1Mk2 & Mk3 (1) (1) Mk1 - Standard See also: - Standard; Exhaust manifold Manifold & Fittings Manifold DESCRIPTION REQ. QTY PART NO. Gasket - Exhaust/inlet manifold to head; Gasket - Exhaust/inlet Gasket - Exhaust manifold to down pipe; Gasket - Exhaust manifold EXHAUST MANIFOLD FIXINGS (Studs/Bolts) EXHAUST MANIFOLD FIXINGS Manifold to down pipe; EXHAUSTS EXHAUSTS RL1496 RG1280 RX1382 RX1383 RL1207SS (1) PART TWIN SPORTS SYSTEM (LESS MANIFOLD) - RL1207SS (for above system) ALL ModelsNote: if fitting to standard Mk1 downpipe, use adaptor sleeve RL1496. (1) PART TWIN SPORTS SYSTEM Part ‘Twin’ Sports Exhaust system; Less manifold. System connects to either the standard (cut down) downpipe or our 6 branch tubular manifold. Fitting kit As required for Mk1. Allows exhaust to couple to standard Mk1 downpipe. Adaptor sleeve (1) DESCRIPTION REQ. QTY PART NO. RG1284 RG1287 RG1277 RG1279 Technical Notes: - comes in rolls 2" Thermo-Tec heat wrap - which is race & rally proven to the contours wide x 50ft long (2 rolls required for GT6’s) and moulds of the manifold. or carcinogens) Being a Silica based fabric (it does not contain asbestos up to 1000 it is unaffected by oil or water, withstands temperatures by up to 70%. degrees Celsius and reduces under bonnet temperatures Snap-Strap Retaining Kit to retain the We strongly recommend that you use Snap-Straps profile (for insulation. These are Stainless Steel straps with a narrow snap type heads. tight spots) that you cut to length and fasten with clips! Alternatively you can skin your knuckles and use hose Thermo-Tec Insulating wrap - 2" x 50’ rollThermo-Tec Snap-Strap kit - Stainless steel (2) (1) RG1279D MK2 & MK3 STANDARD MK2 & MK3 STANDARD RG1143SS TUBULAR MANIFOLD - 6 INTO 2 INTO 1 MK2 & MK3 SPECIAL TUBULAR MANIFOLD - RG1288SS 6 INTO 3 INTO 1. IMPROVED PERFORMANCE. ; Excludes fitting kit. 16 (for Full Twin Sports system) with standard tubular manifold (1) with special tubular manifold (1) Mk2 & Mk3 (1) Mk1 (1) Mk1Mk2 & Mk3 (1) MK1 TUBULAR - MANIFOLD RG1276SS Includes fittings required to fit full twin sports system, including ‘manifold to head’ gasket . FULL TWIN SPORTS SYSTEM Full Twin Sports exhaust & manifold system; Includes Twin sports rear silencer system and 6 branch Tubular manifold. Fitting kit DESCRIPTION REQ. QTY PART NO. Insulating Wrap gives gives Insulating Wrap TM GEG682 AJM613 RG1288SS RG1276SS RG1143SS Thermo-Tec Safety with Performance of heat in the Tubular manifolds by design produce a vast amount electrical/ignition engine compartment. This increases the possibility of risk of fire (if components not working effectively and promotes a higher manifold), not to any combustible material comes in to contact with the on the engine! mention the likelihood of severe burns when working wrap you By wrapping your tubular manifold with Thermo-Tec insulating can overcome all these risk factors. the exhaust gases Thermo-Tec keeps the heat within the manifold so pressure have a much higher velocity, this induces negative in better (scavenging) which increases air intake flow, resulting performance & economy. Manifolds For Tubular Y’ pipe, connector pipe and either a ‘

6 into 2 into 1. Large bore (mandrel bent)6 into 3 into 1. Improved performance. (1) Standard spec (1)

When fitting Sports exhaust, Tubular extractor

Mk1 (1) Mk2 & Mk3 (1) 6 into 2 into 1. Mk2 & Mk3 Stainless steel Mk1 Stainless steel (1)

HEAT WRAP HEAT

INSULATING These systems use twin rear silencers which couple directly to a Stainless Steel Sports Exhaust Systems Rear Silencer - Twin Note: When fitting Sports exhaust, Tubular extractor manifold Sports exhaust, Tubular extractor Note: When fitting require filters, the carburettors may and/or K&N air sections. see ‘Needles’ in Carburettor adjustment. Please STAINLESS STEEL Tubular Exhaust Tubular Manifolds Inlet/exhaust manifold gasket (to cyl head) See photos. 6 branch tubular manifold; FULL TWIN SPORTS SYSTEM (INC MANIFOLD) RG1279D SHOWN DESCRIPTION REQ. QTY PART NO. Note: manifold, and/or K&N air filters, the carburettors may require adjustment. Please see ‘Needles’ in Carburettor sections. tubular exhaust manifold or standard downpipe, depending on which system you decide fit. DESCRIPTION QTY REQ. PART NO. DESCRIPTION QTY REQ. PART NO. DESCRIPTION QTY REQ. PART NO. EXHAUSTS Sports Exhaust Systems - Single Rear Silencer & Tubular Manifold Stainless Steel System These systems include a ‘free-flow’ single Sports version of the standard rear silencer with polished tail pipes and a stainless steel exhaust system, complete with 6 branch tubular manifold. Sports silencers are available separately, see ‘REAR’ SPORTS SILENCERS ONLY. Note: When fitting Sports exhaust, Tubular extractor manifold, SINGLE SPORTS EXHAUST (FULL SYSTEM) and/or K&N air filters, the carburettors may require adjustment. MK2 & MK3 - RG1304 (WITH STANDARD TUBULAR MANIFOLD)

SINGLE SPORTS EXHAUST (FULL SYSTEM) MK1 - RG1302

SINGLE SPORTS EXHAUST (FULL SYSTEM) SINGLE SPORTS EXHAUST (FULL SYSTEM) MK3 - RG1304D Full ‘Single’ Sports Exhaust & Manifold system; (WITH SPECIAL TUBULAR MANIFOLD) Includes Single sports rear silencer system and 6 branch Tubular manifold. Excludes fitting kit. Mk1 (1) RG1302 Mk2 & Mk3 with standard tubular manifold(1) RG1304 with special tubular manifold (1)RG1304D Fitting kit (for Full ‘Single’ Sports system); Includes fittings required to fit full single sports system, including ‘manifold to head’ gasket. Mk1 (1) RG1302FK Mk2 & Mk3 (1) RG1304FK

Sports Exhaust Systems - Single Rear Silencer (Standard Manifold) Stainless Steel System SINGLE SPORTS EXHAUST MK1 - RG1173SP

These systems include a ‘free-flow’ single Sports version of the standard rear silencer with polished tail pipe(s) and a stainless steel exhaust system, using a standard downpipe. Sports silencers are available separately, see ‘REAR’ SPORTS SILENCERS ONLY. Note: When fitting Sports exhaust, Tubular extractor manifold, and/or K&N air filters, the carburettors may require adjustment. SINGLE SPORTS EXHAUST SINGLE SPORTS EXHAUST MK2 - RG1145SP ‘Single’ Sports Exhaust system; MK3 - RG1024SP (AS SHOWN) Less manifold. Includes standard downpipe and exhaust system but with Rear Single Sports silencer with polished tailpipe(s). Mk1 (1) RG1173SP Mk2 (1) RG1145SP Mk3 (1) RG1024SP Fitting kit (for ‘Single’ Sports system); Mk1 (1) RG1175 Mk2 (1) RG1176 Mk3 (1) RG1017

17 EXHAUSTS SINGLE EXIT PERFORMANCE SYSTEM MK2 & MK3 - RG1282 DESCRIPTION REQ. QTY PART NO. RG1282 RG1282FK (1) 18 REAR SPORTS SILENCER MK2 & MK3 - GEX3483SSSP (for single large-bore system) (for single large-bore DESCRIPTION REQ. QTY PART NO. SINGLE EXIT LARGE-BORE SINGLE PERFORMANCE EXHAUST INC MANIFOLD) (FULL SYSTEM only Mk3 models Mk2 & systemFull ‘Single’ Large-Bore STAINLESS STEEL SYSTEM INCLUDES; (1) a ‘2 into 1’ 3 into 1) tubular manifold, 6-branch (6 into a rear a front intermediate pipe, manifold link pipe, kit. pipe. Excludes fitting link and rear silencer/tail Fitting kit single-large bore performance Includes fittings required to fit head’ gasket. system, including ‘manifold to REAR SPORTS SILENCER MK1 - GEX3482SSSP GEX3482FK GEX3483FK GEX3482SSSP GEX3483SSSP (1) (for Rear Sports silencer); (Single tailpipe) When fitting Sports When fitting Sports exhaust, Tubular extractor

Mk2 & Mk3 (1) Mk1 (1) Cross Box/Twin Tailpipe Mk1 Mk2 & Mk3 (1)

looks superb. polished big bore tail pipe too noisy, while the sound without being satisfactory sporty note gives a very slightly deeper exhaust (6 into 3 into 1 collectors). The (6 into 3 into 1 collectors). to extract the most from your engine to extract the most from Note: special design being expertly crafted (mandrel bent) special design being expertly exhaust/tubular manifold, and/or K&N air filters, the carburettors may require adjustment. the gases more effectively. The manifold is also of the gases more effectively. ‘pulse’ effect, this reduces back pressure, expelling ‘pulse’ effect, this reduces exhaust bore being larger (and free flowing) causes a exhaust bore being larger The system improves performance because the The system improves performance. really will improve your GT6 - both in looks and really will improve your This single exit Large-Bore Stainless Steel system exit Large-Bore Stainless This single Stainless Steel Stainless System System System Mk3 only) (Mk2 & Performance Exhaust Performance Single Exit Large-Bore Exit Single Fitting kit enhance your GT6. Excludes fitting kit. being too noisy) and the polished tailpipe(s) will really Rear Sports silencer; flow’ design gives a sporty exhaust note (without Note: manifold,and/or K & N air filters, the carburettors may require adjustment. replacement for the standard rear silencer. The ‘free- fitted to a standard exhaust system as a direct These Rear ‘free-flow’ single sports silencers can be These Rear ‘free-flow’ single sports silencers can Stainless Steel Rear Sports Silencer DESCRIPTION REQ. QTY PART NO. Includes fittings required to fit rear sports silencer. RL1587 153726 144621 120694 506119 506115 506066 501606 155030 706919 519770 126607 158072 158002 119100 144095 158493 146240 108021 154945 113868 106268 GSD115 GSD111 RL1528L 520999A NKC105A NKC105A NKC101A RL1528W RL1528LA BAU1074A BAU1074A RL1528WA 155030Cap (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) GEAR KNOBS NON-OVERDRIVE (Inc cap & switch) (Rubber) (For knob 155030) (Speedo drive pinion) (Speedo drive pinion) (For knob 155030) (larger Amco style) (larger Amco style) (Gear lever seating) (Speedo drive pinion) (Speedo drive pinion) Overdrive operating (1) Reverse & overdrive switches (1) Non-overdriveOverdrive (Mk3) (1) 1st & 2nd3rd & 4thReverseFork (1st & 2nd)Fork (3rd & 4th) (1) (1) (1) (1) (1) Locates directly on to extension/top cover. WoodLeatherWood (1) (1) Leather DESCRIPTION REQ. QTY PART NO. Wiring harness (Mk3) (1) Gaiter - Gear lever Oil seal OVERDRIVE Models Speedo CableAngle driveSpeedo drive pinion‘O’ ring/sealHousing/bearing Mills pin (1/16”) (1) (1) (1) (1) (1) Switch only (Mk3) Cap only (Mk3) Gauntlet - Gear lever (vinyl)Bush kit Cap - Lever retaining (1) REMOTE FITTINGS (GEAR LEVER) (1) Reverse light switch (1) Speedo drive pinionO’ ringHousing/bearing (1) (2) For housing/bearing 506066 Oil seal NOTE; Top cover extension bolts directly to main top cover 158943. Actuator cam - Overdrive inhibitor switchMounting bracket - (1) Top cover casing (1) Speedo Cable & Drive Pinion NON-Overdrive Models Speedo Cable (1) Gear Lever - Remote Gear Lever Fittings Cover & Top GEAR LEVER FITTINGS Gear knob - original type; Overdrive gear lever Gear lever knob - alternative Non-overdrive Selector shafts; Selector forks; . DP205 155660 106437 157732 132078 132079 132292 122569 137532 306468 132080 143707 132077 209590 217333 88G564 GRB209 22G2115 (1) (1) (1) (1) (1) (1) ; 19 - Clutch Drive Components & Clutch Speedo Cable & Drive Pinion’ (Non-overdrive) (Magnetic) bellhousing to gearbox: wherever possible please quote: (Bush/oil seal) (Bellhousing to gearbox) (Case to extension) (Housing to gearbox) ENGINE & CLUTCH (For 132078 housing) PLUS ANY COMPONENT INFORMATION. to help ensure you receive the correct component, Mk1 & Mk2Mk3 (1) (1) Two important points to note when re-fitting Re-fitting the bellhousing If you are not sure which part/part number you require, MODEL, YEAR, CHASSIS AND/OR ENGINE NUMBER HELP US TO HELP YOU HELP US TO HELP YOU 1) Ensure the 3 tension springs (137532) are inserted in the front lower section of the gearbox case. 2) Ensure the correct length bolts/setscrews are used, if too long, fouling will occur with gearbox internals. TECHNICAL JOTTINGS Hydraulics. Bearing - Rear extension/outputOil seal - Rear extension/output (1) (1) Dowel Fulcrum pivot pinOil seal Gasket *Tension spring (1) (3) Rear extension See also; ‘Input Shaft / Mainshaft & Gears’, and ‘Overdrive & Fittings’. Oil filler plugOil drain plug (1) Gearbox Case/Rear Extension Rear Extension for NON-Overdrive models only. For speedo drive see - ‘ Gearbox casing (1) *See ‘Technical Jottings’ - Re-fitting the clutch/bell housing. Clutch operating leverCarrier - Release bearingClutch release bearing (1) (1) (1) Clutch Housing Clutch Housing & Operation GT6 MK1 Engines/Components. See: Important Information - Early See also; Clutch bellhousing (1) Housing Gasket DESCRIPTION REQ. QTY PART NO. 132292 513204 506098 106437 120305 122689 159656 122569 GGL190 88G564 7H8325 7H8196 RV6085 RG1183 RG1050 RG1049 RG1047 RG1048 RH5091 22G1911 37H1901 37H1901 307862R RG1003R RG1045R RG1012R 709862PL 709862FG (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) (a/r) for fixing bolts/nuts etc. (0.5 litre) (Rubber) (Non-O/drive) (Overdrive) (Bellhousing) (Exchange) (Exchange) (Exchange) (Exchange) (Reconditioned) Gearbox only = 1.1/2 pints (0.9 litres) GEARBOX/OVERDRIVE - OIL CAPACITIES ENGINE & GEARBOX MOUNTINGS’ Rear output Solenoid side plateSide plate (1) (1) Solenoid to overdrive case (1) Top cover to gearboxAdaptor to overdrive (1) (1) Mk3 (1) Mk1 & Mk2 (1) Overdrive main case to rear case G/box to rear extension/adaptor Remote G/lever ext’ to top cover FibreglassPlastic (1) (1) Non-overdrive (2) Overdrive (1) All models All models All models All models Mk1 & Mk2Mk3 (1) (1) OverdriveBellhousing to gearbox (1) (1) Gearbox (1) Rear output Front cover Unipart EP90 gear oil Gearbox & Overdrive (‘D’ type); Gearbox & Overdrive (‘D’ type; Overdrive unit only - ‘D’ Gearbox - Overdrive type (Less O/drive); Gearbox - Overdrive OVERDRIVE models; Does NOT include overdrive components or overdrive gaskets. NON-Overdrive models; Gearbox Reconditioning Kits Include gearbox gaskets, oil seals, bearings, synchro rings, layshaft, thrust washers, reverse gear. Gaskets -Gearbox & overdrive; Gaskets & Oil Seals Gaskets (Gearbox) Gasket sets; For illustration see: BODY PANELS & FITTINGS - Floor Panels/Inner Sill. See: ‘ Gearbox mounting Supplied less solenoid, output flange, adaptor plate & speedo drive. Supplied less solenoid, output flange, Gearbox & overdrive supplied assembled, less;clutch housing, Gearbox & overdrive supplied assembled, output flange, brackets, gearlever, top cover extension, solenoid, ancillaries & wiring. Supplied less; clutch housing, gearlever, top cover extension, ancillaries housing, gearlever, top cover Supplied less; clutch & overdrive. internally to avoid cross Note: Ensure overdrive is cleaned to gearbox. contamination of old oil before fitting Units Units type; Gearbox - NON-Overdrive extension & housing, gear lever, top cover Supplied less; clutch ancillaries. Gearbox & Overdrive Gearbox Oil seals - Gearbox & overdrive; GEARBOX MOUNTING; TUNNEL COVER; Cover - Gearbox tunnel Seal kit (1) DESCRIPTION REQ. QTY PART NO. Gearbox & overdrive assembly = 2.3/8 pints (1.4 Litres) GEARBOX & OVERDRIVE GEARBOX & OVERDRIVE PROPSHAFTS PC12 NKC81 506098 513204 213150 213151 144580 106254 106448 120694 305137 106437 146102 515817 129862 113071 106477 109521 TN3209 TN3209 GHF332 GUJ115 7H8325 7H8196 RG1048 22G1435 213150R 213151R 144961A 37H1901 37H1901 533360A 307862R UKC8120 109521PL (1) (1) (1) (8) (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) (21 teeth) (For bolt 106477) (Exchange) (Overdrive to gearbox) (Exchange) (Threaded both ends) (For fulcrum pin 106448) (Outright purchase) (Outright purchase) (Rear extension/output) (Rear casing/output) (Solenoid to case) in this parts catalogue (to help identify factory New New to rear extension (1) Recon’ Recon’ (For bolt 144961A) Overdrive type- O/drive main case Side plate coverSide cover - Solenoid side (1) (1) Adaptor to gearbox (1) Castle head typeClevelock type (1) (1) All models (Exchange) (1) Adaptor to overdrive main case Non-overdrive type- the vehicle was new and not subsequent replacements. COMPONENT & COMMISSION NUMBERS Where commission and/or component numbers are quoted specification changes), they refer to components/parts when DESCRIPTION REQ. QTY PART NO. Propshafts Propshaft; Universal jointBolt - Prop flangeNut (8) (2) Bearing Oil seal Operating lever (Reverse)Operating lever (1) Fulcrum pin Fulcrum pin Nut - Nyloc Speedo Angle driveGasket set (Overdrive)Gaskets; (1) (1) OUTPUT FLANGE & FITTINGS Drive flangeNut (Drive flange); WasherSplit pin (1) (1) (1) Overdrive & Fittings Overdrive (‘D’ type) in this section. We have only listed major components in stock that are too numerous There are many parts we hold is not shown, please to list here, if the item you require contact us. OVERDRIVE & SOLENOID output flange, adaptor plate & Overdrive units supplied less solenoid, speedo drive. Note: Ensure gearbox is cleaned internally to avoid cross contamination of old oil before fitting overdrive. Overdrive unit only - ‘D’ Type; Solenoid - NewADAPTOR PLATE - GASKETS & OIL SEAL Adaptor plate (1) REVERSE GEAR & OPERATING LEVER & OPERATING GEAR REVERSE gear assembly Reverse bush 129862. Includes gear)Bush (Reverse (Reverse gear)Distance piece gear)Spindle (Reverse (1) gear)Bolt (Reverse Washer - Spring (1) (1) (1) Solenoid plunger onlyGasket (1) PC12 WM74 37948 NKC81 144595 106270 119893 119891 113229 137532 104445 148409 150328 144690 155755 212993 156968 146102 515817 BLS108 DS1908 510618A UKC3196 UKC8120 NH609041 WL600121 (1) (1) (1) (4) (1) (3) (3) (a/r) Y Y 20 Y DA Y DA (For needle roller) stock availability for you. (Countershaft - rear) (Countershaft - front) (For synchro hub 156968) (For synchro (Pack of 50) (For synchro hub 156968) (For synchro (For synchro hub 156968) (For synchro hub If the part you require is not listed here, (Countershaft/laypin) EVER Shim Ball bearing Ball bearing Mk3 (2) Mk1 & Mk2 (2) Mk1 & Mk2 (1) Mk3 (1) Mk1 & Mk2Mk3 (1) (1) Mk3 (1) Mk1 & Mk2 (1) Spring Spring Mk1 & Mk2 (1) Mk3 (1) Castle head typeClevelock type (1) (1) EVER please enquire, we can check factory parts listings and MORE STOCK MORE STOCK DESCRIPTION REQ. QTY PART NO. Synchro ring (3rd & 4th gear); Countershaft/Reverse Lever Gear & Operating We have only listed major components in this section. There are many parts we hold in stock that are too numerous to list here, if the item you require is not shown, please contact us. COUNTERSHAFT & LAYGEAR Countershaft (Laypin) (1) Dowel DRIVE FLANGE & FITTINGS DRIVE FLANGE models NON-Overdrive Drive flange Needle rollers Retaining plate Countershaft/Laygear cluster; Tension springThrust washer (3) Nut - Nyloc; Thrust washer Washer; Synchro hub (3rd & 4th) hub (3rd & Synchro (1) WasherSplit pin (1) (1) Nut (Drive flange); OVERDRIVE models Drive flange (1) 37948 137834 112654 156911 106388 104433 112654 129839 106365 144782 104433 157732 148409 150328 132292 213113 216972 144627 154821 137775 213018 137615 155206 132097 BLS108 TKC533 TKC923 88G564 7H8325 533360A UKC4454 CR620325 (3) (3) (1) (1) (1) (1) (1) (1) (1) (1) (1) (a/r) (33 teeth) (Locates in main case) (For synchro hub 156911) (Input shaft to mainshaft) (Locates in main case) (For synchro hub 156911) (For centre bearing 104433) (Retains bearing 104433 in casing) (For synchro hub 156911) (Bearing to shaft) (For centre bearing 104433)

Shim Spring Rear (Non-overdrive)+Rear (Overdrive)++ (1) (1) Ball bearing Rear (Extension) (Non-overdrive) +Locates in rear extension case. ++Locates in overdrive case. Mk3 (2) Mk1 & Mk2 (2) Front (1) Mk3 (1) Mk1 & Mk2 (1) Rear (Overdrive unit) (1) Mk3 (1) Mk1 & Mk2 (1) Mk3 (1) Mk1 & Mk2 (1) Mk3 (1) Mk1 & Mk2 (1) Mk1, Mk2 & Mk3 (1) Mk3 (1) Mk1 & Mk2 (1) Centre

Synchro ring (1st & 2nd gear); Synchro hub (1st & 2nd) Split collarFits between 1st gear & synchro ring. (1pr) Fits between 1st gear & mainshaft centre bearing. Mainshaft oil seals; Snap ring Input shaft; INPUT SHAFT & FITTINGS INPUT SHAFT

We have only listed major components in this section. major components in this We have only listed are too numerous parts we hold in stock that There are many please item you require is not shown, to list here, if the contact us. Input Shaft/Mainshaft Shaft/Mainshaft Input & Gears Circlip 1st Speed gear; Mainshaft - Non-Overdrive models; Mainshaft - Non-Overdrive Circlip Oil FlingerNeedle roller MAINSHAFT & FITTINGS (1) 2nd Speed gear; Bearing - Front Washer (1) Snap ring Mainshaft - Overdrive models; 3rd Speed gear; Mainshaft bearings; DESCRIPTION REQ. QTY PART NO. WM810 117578 133568 131796 132856 136869 131008 151824 136818 TN3209 GHF324 GHF224 142333 104773 104582 121860 121862 GHS111 117578P 133568P 131796P 21H5774 510618A FAM2004 510618A WA600071 142333 (2) (2) (2) (2) (2) (2) (4) (4) (1) (1) (1) 21H5774 (2) (2) (2) (a/r) (a/r) 121862 (NON Rotoflex) 121860 • • 514370 (Mk3 from KE20001) (For bolt 136869) • PER VEHICLE TRUNNION KIT (For bolt 136869) (Outer) 104582 • • • ; DRIVE SHAFT & REAR HUB (Mk3 to KE20000) (For bolt 132856) (For nut 510618A) Poly Poly Standard Standard (Front cross piece to diff) (Diff to chassis) 104773 (Drive shaft retaining) Poly (2) StandardMk1 & Mk3 (2) Upper; Mk2Mk3 (a/r) Lower ILLUSTRATION SHOWS LOCATION OF (NON ROTOFLEX) DRIVE SHAFT IN RELATIONSHIP TO THE DIFFERENTIAL AND REAR HUB. These items locate to a captive bolt welded into the chassis frame. These items locate to a captive bolt Bolt Nut - Nyloc REAR MOUNTING Mounting bush Nut - Locking TOP (SPRING) MOUNTING Stud - Leaf spring to diff case; Washer Washer - Plain FRONT MOUNTING Mounting rubber; • Bolt Differential Mountings Mountings Differential Flange & Drive Washer - Steel DESCRIPTION REQ. QTY PART NO. Wheel stud onlyNut Washer (8) Hub seal - Outer Housing - Outer hub oil sealGrease catcher/flingerTab washer (2) Bolt - Tab washerDrive flange (2) (2) (8) (4) FAM2004 .. Y .. Y ...... 56935 114749 159801 117952 GGL190 128978 117853 204226 122115 514370 GFG117 GHB117 SS SS 22G2115 21H5478 UKC6733 DAM5079 TT TT II II QUICKL QUICKL (1) (1) (2) (2) (2) (2) (1) GHS111 (a/r) KK KK .. .. 204226 ...... GHB117 SS 117853 SS GFG117 TT TT 21 (0.5 litre) II II (Needle roller) KK 128978 KK (Later units only) (Later units ...... (Not illustrated) .. (Alternative to 56935) 104581 .. (Per vehicle) .. (Bearing housing) Differential = 1 pint (0.6 litres) Differential = 1 pint (0.6 Differential - Oil Capacity SS SS (Diff housing/casing) TT TT II II THE EASY WAY TO ORDER AND GET 3.27:1 Ratio3.27:1 (1) Diff pinion side (2) 3.89:1 Ratio 3.89:1 Diff pinion front (1) KK KK Unipart EP90 gear oil THE RIGHT PARTS YOU NEED Crownwheel & pinion; Crownwheel & GASKET OIL SEALS Oil seals; Oil filler plug (1) Diff carrier (1) Gasket Bearing - Inner hub* Hub seal housing 104773 to inner hub Bearing - Outer hub (2) Hub seal - Inner* (2) Hub - Inner Grease nipple Trunnion kit Gasket (2) Blanking plug DESCRIPTION REQ. QTY PART NO. 128469 122115 STONEGUARD ONLY 132023 104581 128469 128135 155928 TN3209 GUJ115 RX1542 518946R 518950R 37H4973 NKC263R GHK1022 RTC2305R 518950RN 518946RN NKC263RN RTC2305RN 514370 (1) (1) (1) (1) (1) (1) (1) (1) RUNNION KIT (2) (2) (8) (8) PER VEHICLE T DRIVE SHAFT 128135 MK1 155928 MK3 (Per hub) (4 stud case) (6 stud case) (6 stud case) (4 stud case) (4 stud case) (6 stud case) (6 stud case) • • (4 stud case) • (Drive shaft to outer hub) • 37H4973 FLANGE ONLY (3.27:1) •Fitted with New Crownwheel & Pinion. •Fitted with New Crownwheel & Pinion. •Fitted with New Crownwheel & Pinion. (3.89:1) (3.89:1) (3.27:1) (3.27:1) (3.89:1) (3.89:1) (3.27:1) •Fitted with New Crownwheel & Pinion. GUJ115 (Flange to output shaft) (For nut 132023) Non-Overdrive Overdrive Overdrive Non-overdrive Non-overdrive Mk1 models (Short shaft)Mk3 models (Long shaft) (2) (2) REAR HUB PULLER RX1542 MK3 only From KE/KF 200001 MK3 only From KE/KF Differential - Reconditioned; MK1, MK2 & MK3 (MK3 to KE/KF 200000) MK3 (MK3 to KE/KF MK1, MK2 & Reconditioned; Differential - We have only listed major components in this section. in this section. components only listed major We have numerous that are too we hold in stock many parts There are please item you require is not shown, to list here, if the contact us. Differential Nut• Rear hub bearing kit Stoneguard/oil flingerWoodruff key Hub bearing kit includes items marked* (2) •These 2 items are NOT illustrated. Universal joint (2) Includes yoke, but less drive flange. Drive Shaft & Rear Hub Shaft & Drive NON-’Rotoflex’ system fitted to; All MK1’s to KC50000, and MK3’s from KE/KF20001. Rear hub puller toolDrive shaft only; (1) Drive flange onlyBolt• (2) DESCRIPTION REQ. QTY PART NO. DIFFERENTIAL DRIVE SHAFTS (NON-Rotoflex) DRIVE SHAFTS (Rotoflex) 142333 140793 152483 152484 152485 152486 152487 149051 510618A 21H5774 (2) (2) (ROTOFLEX) REAR HUB PULLER RX1542 149051 142333 21H5774 DRIVE SHAFT & REAR HUB & REAR SHAFT DRIVE (For nut 510618A) (Drive shaft retaining) 0.139”0.141”0.143”0.148”0.155” (a/r) (a/r) (a/r) (a/r) (a/r) 152483-87 DISTANCE PIECE/SPACER Washer Nut Complete with wheel studs. Wheel stud only (8) Shim (0.003”)Distance piece/spacer; (a/r) Outer hub assembly (2) DESCRIPTION REQ. QTY PART NO. 308437 (RH) 308438 (LH) VERTICAL LINK 510618A 308438 308437 149426 GHS130 GHS125 UKC169 GHB265 GHK1528 140793 SH606071 (1) (1) (2) (4) (8) 144233 PAGE 28. GHS130 PLEASE REFER TO PLEASE REFER REAR SUSPENSION GHS125 GHB265 214614 DRIVE SHAFT OUTER 22 144588 (Per hub) (Not Illustrated) UKC169 (Not Illustrated) GCD301 Left hand Right hand 141850 Tab washer• Rear hub bearing kit Bolt - Tab washer• Hub seal - Outer* (2) •Locates brake backplate to vertical link. Bearing - Outer* hub (2) Hub bearing kit includes items marked* Hub seal - Inner*Bearing - Inner* hubVertical link; (2) (2) 214623 DESCRIPTION REQ. QTY PART NO. PAGE 28. 148850 PLEASE REFER TO REAR SUSPENSION DRIVE SHAFT INNER WD116101 132023 144588 141850 144233 214623 212067 214614 148850 149865 TN3209 GUJ115 RG1053 RX1542 GCD301 510618A 37H4973 GCD301P WD116101 (6) (6) (8) (8) (2) (2) GUJ115 149865 510618A 37H4973 TH3209 132023 212067 (Coupling to drive flange 212067) (Coupling to outer drive shaft 216614) (For nut 510618A) (Flange to output shaft)

(Flange to inner drive shaft) (For nut 132023) Long OriginalReplacement (2) (2) Short

Bolt kit - Rotoflex coupling (2) Nut Washer Universal jointWoodruff key (2) (2) Bolt (Rotoflex coupling); Per coupling, includes 3 long and 3 short bolts. Rotoflex coupling; *Items included with drive shaft 214614. Drive shaft to coupling 212067. Drive coupling - Inner (2) Rear hub puller toolIncludes yoke, but less drive flange. Drive flange only (1) (2) KE/KF20000. Drive shaft - InnerBolt (2) Nut All MK2’s from KC50001, and MK3’s to ‘ROTOFLEX’ system fitted to; Drive Shaft & Rear Hub Shaft & Drive Drive shaft - outerSpacer*Stoneguard/oil flinger* (2) (2) (2) DESCRIPTION REQ. QTY PART NO. DESCRIPTION QTY REQ. PART NO.

FRONT SUSPENSION DESCRIPTION QTY REQ. PART NO. DESCRIPTION QTY REQ. PART NO.

FRONT ANTI-ROLL BAR GHF223 Front Hub & Upper 125482 WA600071 Wishbones Top wishbone & bush (4) 119272 Bush only GHF224 Standard (4) 119451 Poly (4) 119451P WA600071 GHF333 Upper suspension overhaul kit 125074 with standard bushes (2) RH5080 GHF222 (2) with poly bushes (2) RH5080P Per side & includes; 1 ball joint GSJ155, 2 bolts BH605181, 2 nuts GHF222, 2 washers GHF332, 1 nut GHF224, 1 washer GHF332 (2) WD600071, 2 bushes 119451, 2 bolts BH606181 & 2 nuts GHF223. ✙207093 ✙123998 Bolt - Wishbone inner (4) BH606181 125481 ✙217033K ✪155310 Nut - Nyloc (For bolt BH606181) (4) GHF223 ✪217033 Ball joint (2) GSJ155 WA600071 GHF222 (2) ✙123503 Nut - Nyloc (Ball joint to link) (2) GHF224 GHF224 ✪155308 ✙123998 Washer - Locking (For nut GHF224) (2) WD600071 ✪155310 Bolt (Ball joint to wishbone) (4) BH605181 ✙123694 Nut (For bolt BH605181) (4) GHF222 GHF223 GHF332 (2) ✙123502 ✪155307 ✪155308 Washer (For bolt BH605181) (4) GHF332 Vertical link; GHF333 ✙123694 ✙ MK1, MK2 & MK3 TO KE/KF20000 Right hand (1) GSJ267 WA600071 ✪155307 ✪ MK3 ONLY FROM KE/KF20001 125074 Left hand (1) GSJ264 Grease nipple (Vertical link) (2) LN30041 Grease plug (Alternative to LN30041) (2) FAM581 Seal (For lower trunnion) (2) 122126 See; Front Spring/Damper & Lower Arm for Trunnions & fittings. Front Anti-Roll Bar FRONT HUB Steering arm; & UPPER WISHBONE Right hand (1) 205504 MK1, MK2 & MK3 (MK3 to KE/KF20000) Left hand (1) 205505 Anti-roll bar (1) 207093 Water shield (2) 138559 Anti-roll bar conversion kit (1) 217033K Seal (Caliper mounting plate to link) (2) 138051 The original anti-roll bar (207093) is no longer available. This conversion kit allows the later type bar to be fitted to early cars and includes; Anti- Caliper mounting plate; roll bar (217033), 2 bushes (155310), 2 clamps (155308), Right hand (1) 145106 119451 (4) 2 ‘U’ bolts (155307), nuts and washers. GHF223 (4) Left hand (1) 145107 Overhaul kit (Anti-roll bar) 119272 (4) Bolt - Front lower* (2) 118324 with standard bushes (1) RH5064 Nut - Nyloc (For bolt 118324) (2) GHF223 with poly bushes (1) RH5064P BH606181(4) For original (early) spec’ anti-roll bar 207093. Bolt - Rear lower* (2) SH606101 Per car; Includes 2 links 125481/125482, 2 nuts GHF224, GHF332 (4) Washer - Spring (For bolt SH606101) (2) GHF333 2 studs 125074, 2 nuts GHF223, 2 bushes 123998, 2 clamps 123502, *Caliper mounting plate (lower) & tie rod to vertical link. 2 ‘U’ bolts 123694, 4 nuts GHF222 and all washers. GHF222 (4) Bolt - Upper** (4) GHF120 Bush - Roll bar mounting (For 207093) Washer - Spring** (For bolt GHF120) (2) GHF333 Standard (2) 123998 **Caliper mounting plate (upper) to vertical link. Poly (2) 123998PS Stub axle (2) 132065 Clamp (Bush retainer) (For 207093) (2) 123502 GSJ155 Nut (Stub axle to vertical link) (2) 252165 ‘U’ bolt (For 207093) (2) 123694 BH605181(4) Washer (For nut 252165) (2) WP12 Nut (For ‘U’ bolt 123694) (4) GHF222 WD600071 (2) Front hub bearing kit (2) GHK1011 WP12 (2) Per side & includes; 1 of each bearing GHB101 & GHB102 & 1 seal GHS146. Washer (For ‘U’ bolt 123694) (4) GHF332 252165 (2) GHF224 (2) Hub seal (2) GHS146 Hub bearing - Inner (2) GHB101 MK3 from KE/KF20001 LN30041 (2) GSJ267 (RH) Hub assembly Anti-roll bar (1) 217033 GSJ264 (LH) Overhaul kit (Anti-roll bar) Standard (2) 145007 Alloy (2) 145007A with standard bushes (1) RL1286 FAM581 (2) with poly bushes (1) RL1286PS GHF223 (2) 138559 (2) Wheel stud only (4) 21H5774 Per car; Includes 2 links 125481/125482, 2 nuts GHF224, 138051 (2) Hub bearing - Outer (2) GHB102 2 studs 125074, 2 nuts GHF223, 2 bushes 155310, 2 clamps 155308, ‘D’ Washer (2) 132666 2 ‘U’ bolts 155307, 4 nuts GHF222 and all washers. GHF332(4) Bush - Roll bar mounting Nut - Castle headed (2) LN2211 Standard (2) 155310 205504 (RH) Split pin (2) PC20 Poly (2) 155310PS 205505 (LH) Grease cap/cover (2) 132665 Clamp (Bush retainer) (2) 155308 ‘U’ bolt (2) 155307 122126 (2) 145106 (RH) GHF120 (4) Nut (For ‘U’ bolt 155306) (4) GHF222 145107 (LH) Washer (For ‘U’ bolt 155306) (4) GHF332 118324 (2) GHF333(4) ALL MODELS SH606101 (4) Link - Anti-roll bar; GHS146 (2) Right hand (1) 125481 GHB102 (2) 132065 (2) Left hand (1) 125482 132666 (2) Nut (Link mounting to suspension) (2) GHF224 GHB101 (2) Washer (For nut GHF224) (2) WA600071 LN2211 (2) 21H5774 (8) Stud (Link to roll bar) (2) 125074 PC20 (2) Washer (For stud 125074) (2) GHF333 132665 (2) Washer (For stud 125074) (2) WA600071 145007 (2) Nut (For stud 125074) (2) GHF223

23 FRONT SUSPENSION 140920 140919 122126 140893 140895 122534 140892 140894 GHF224 BH607201 WD600071 (1) (1) (2) (2) (2) (2) (4) (4) (4) (4) 140894 (2) 140895 (2) 122534 (2) 140920 (LH) 140919 (RH) (Not shown) GHF224 (2) WD600071 (2) GHF224 (2) WD600071 (2) versions). (For trunnion) (For trunnion) (For trunnion) (For trunnion) standard rubber bushes 140894 (2) 140892 (2) 140892 (2) Polyurethane bushes out-perform (For nut GHF224) ROAD SPRING ROAD - TOOL COMPRESSOR RX1328A (For trunnion) HAVE A MUCH LONGER LIFE. REFER TO LISTINGS (without the jarring effect typical of nylon (For bolt 119142) Left hand Right hand THROUGHOUT THIS CATALOGUE FOR FULL AVAILABILITY. IF YOU REALLY WANT TO IMPROVE THE HANDLING, THEN POLYURETHANE BUSHES POLYURETHANE POLYURETHANE BUSHES ARE A GOOD START, THEY ALSO DESCRIPTION REQ. QTY PART NO. Washer Bolt (Trunnion to wishbone)Nut (2) Shield - Outer* Seal* Bearing (Nylon)* Shield - Inner* Lower trunnion; Seal (For lower trunnion) *Items marked are part of trunnion bush kit 514191. Tube/spacer* 119450 (2) 206686 125733 514191 206685 119451 122022 130757 130758 GHF223 GHF223 GHF302 119451 (2) RG1190 RG1191 RG1193 RG1192 119451P RG1193P BH606201 130758 (2) (1) (1) (1) (1) (2) (4) (4) (4) (4) (2) (1) (a/r) (Not illustrated); GHF221 (6) GHF221 GHF300 (6) 24 (Per car) (Per side) (Use as required) BH607201 (2) (For bolt BH606201) 122534 (2) 125733 (2) (For nut GHF223) (Wishbone bracing) (Rear mounting bracket/wishbone) (To mounting bracket) Left hand Left hand Right hand with standard busheswith poly bushesStandard (2) Poly (2) (4) (4) Rear (2) Front (2) Right hand 140895 (2) 140893 (2) DESCRIPTION REQ. QTY PART NO. Lower inner suspension overhaul kit Trunnion overhaul kit Bush only Includes either 1 Rh, or 1 Lh trunnion, PLUS; 1 bolt 119142, 1 nut GHF224, 1 washer WD600071, 1 seal 122126 &.1 bush kit 514191. (Not illustrated) Includes 1 of each of the following kits; RG1190 (Rh) & 1 RG1191 (Lh). Not illustrated Includes 1 spacer 140983, 2 bushes 140892, 2 inner shields 140894, 2 seals 122534, & 2 outer shields 140985. Trunnion overhaul kit (Per side) (Not illustrated) Kit is per side & includes 2 bushes 119451, 2 bolts BH606201 & 2 nuts GHF223. Bolt Mounting bracket (Wishbone); Washer Trunnion bush kit Nut - Nyloc Lower wishbone & bush; Strut Nut Shim (Adjusting) BH607201 (2) GHF223 (4) 119450 130757 (2) 119450P 212425 GHF224 GSA366S GSA366G GSA366K GSA366 147631 122137 517985 GHF221 GHF300 GSA366SA GSA366GA RX1328A 517985P 212425UR BH607201 WD600071 212425 (2) 212425UR (2) 147631 (4) 147631 517985 (4) 122137 (2) 122022 (2) (2) (2) (1) (2) (6) (6) 206685 (RH) 206686 (LH) GHF302 (4) GHF223 (4) (See photo) (Inc standard bushes); (Supplied in pairs); (Supplied in pairs) (Supplied in pairs); GSA366 BH606201 SEE LISTINGS (Supplied in singles) ABSORBER SHOCK ABSORBER (Shock absorber lower)

adjustable (For nut GHF221) adjustable (For bolt BH607201) adjustable Ride adjustableRide adjustable (1pr) (1pr) Ride adjustableRide/height adjustable (1pr) (1pr) Ride/height adjustable (1pr)

(Shock absorber - upper) (Shock absorber lower to wishbone) & LOWER WISHBONE & LOWER (Spring seat retaining) (For bolt BH607201)

Poly (4) Standard (4) StandardPoly (2) (2) Standard

Gaz

Koni FRONT SPRING/SHOCK FRONT

Standard (2) Spax Uprated (2)

Retainer - BushSpring seat/Top plateNut (2) (4) Washer Spring compression tool Bush Front shock absorber & Lower Wishbone & Lower See also: ‘Suspension - Uprated Packages’. Shock Absorber Front Spring - Front DESCRIPTION REQ. QTY PART NO. Bolt Bush only

Nut

Washer Front road spring; RG1190 RG1191 140919 119142 140920 119142 140893 140892 140894 122534 140894 122126 514191 122126 514191 GHF224 GHF224 WD600071 WD600071 when working on important Left Hand Right Hand 1 kit required per Vehicle 1 kit required per Vehicle 1 kit required per Vehicle COMPLETE 2 kits required per Vehicle 514191 RG1192 RG1190 RG1191 However, it is not a finite list. Overhaul Kit Overhaul TRUNNION TRUNNION BUSH KIT TRUNNION OVERHAUL KIT TRUNNION OVERHAUL KIT TRUNNION OVERHAUL SAFETY FIRST believe to be most prone to deterioration. the suspension that you check & verify the It is extremely In this section we listed the parts which we condition of all related parts & components, and replace as a matter of course if suspect. DESCRIPTION REQ. QTY PART NO. This kit contains the following parts: 1 Right hand trunnion 1 Bolt 1 Nut This kit contains the following parts: 1 Left hand trunnion 1 Bolt 1 Nut One kit contains the following parts: 1 Spacer 1 Washer 1 Seal 1 Washer 1 Seal 2 Bushes 2 Inner shields 2 Seals 2 Outer shields 1 Bush kit 1 Bush kit This kit contains the following parts: This kit contains the following 1 ‘Right hand’ overhaul kit This kit also contains 1 bush kit 514191. 1 ‘Left hand’ overhaul kit This kit also contains 1 bush kit 514191. AND SAVE MONEY! 123502 155308 123694 155307 125074 123998 155310 125481 125482 GHF224 GHF222 GHF332 GHF223 GHF333 GHS146 GHB101 GHB102 * * WA600071 WA600071 (to KE/KF 20000) 25 FRONT (for links) (for ‘U’ bolts 155307) 1 kit required per Vehicle 1 kit required per Vehicle 1 kit required per Vehicle 1 kit required per Vehicle 2 kits required per Vehicle RL1286 RH5064 (for clamps 123502) (for clamps 155308) with Standard Bushes with Standard Bushes (for nuts GHF224) (for nuts GHF222) (for nuts GHF223) (for studs 125074) (Mounting - inc. in RH5064) (for bushes - inc. in RH5064) (for bushes - inc. in RL1286) BEARING KIT (Mounting - inc. in RL1286) Overhaul Kit Overhaul RL1286P RH5064P GHK1011 FRONT WHEEL with Polyurethane Bushes with Polyurethane Bushes (Link to bar) (for studs 125074) ANTI-ROLL BAR (from KE/KF 20001) 1 Outer bearing 1 Hub oil seal Don’t forget to check these other parts for wear; ‘D’ Washer (132666), Split pin (PC20), Nut (LN2211). One kit contains the following parts: 1 Inner bearing 2 Clamps 2 ‘U’ Bolts 2 ‘U’ Bolts 4 Nyloc nuts 2 Nuts 2 Washer 4 Washer 2 Studs 2 Washer 2 Bushes 2 Bushes 2 Washer 1 Link (Rh) 1 Link (Lh) 2 Nyloc nuts *Standard or Polyurethane depending on which kit is ordered. 2 Clamps Mk3 These kits contain the following parts: Mk1, Mk2 & Mk3 bar only, not suitable Note: for original spec anti roll bar has been retro-fitted. where conversion kit to later DESCRIPTION REQ. QTY PART NO. 119451 119451 GSJ155 GHF224 GHF223 GHF222 GHF332 GHF223 BH606181 BH605181 BH606201 WD600071 CORRECT PARTS YOU NEED WITH THE MINIMUM OF FUSS - CORRECT PARTS YOU with one of our money saving suspension saving of our money with one OVERHAUL KITS OVERHAUL versions). UPPER 2 kits required per Vehicle 2 kits required per Vehicle 2 kits required per Vehicle 2 kits required per Vehicle standard rubber bushes RH5080 RG1193 Give Your Front Suspension a Lift a Suspension Front Your Give with Standard Bushes with Standard Bushes with Standard Bushes (for bolt BH605181) (for ball joint) (Wishbone) Overhaul Kit Overhaul (Wishbone) Overhaul Kit Overhaul SUSPENSION SUSPENSION RH5080P RG1193P with Polyurethane Bushes with Polyurethane Bushes (Wishbone rear) (Wishbone front) (Wishbone rear) (for bolt BH606181) (for bolt BH605181) LOWER (INNER) LOWER (for bolt BH606181) OVERHAUL/REBUILD, HERE WE HAVE A SELECTION OF KITS THAT WILL ENABLE YOU TO IDENTIFY AND ORDER THE PRECISE AND ENABLE YOU TO IDENTIFY AND ORDER WE HAVE A SELECTION OF KITS THAT WILL OVERHAUL/REBUILD, HERE Polyurethane bushes out-perform WHETHER YOU REQUIRE SUSPENSION PARTS FOR A MINOR REPAIR, OR YOU ARE PROPOSING A MAJOR FRONT SUSPENSION/HUB ARE PROPOSING A MAJOR REPAIR, OR YOU PARTS FOR A MINOR REQUIRE SUSPENSION WHETHER YOU (for ball joint) HAVE A MUCH LONGER LIFE. REFER TO LISTINGS (without the jarring effect typical of nylon THROUGHOUT THIS CATALOGUE FOR FULL AVAILABILITY. IF YOU REALLY WANT TO IMPROVE THE HANDLING, THEN POLYURETHANE BUSHES POLYURETHANE POLYURETHANE BUSHES ARE A GOOD START, THEY ALSO 2 Nuts 2 Nuts 1 Washer 2 Bolts 2 Washer 2 Bushes Standard or Polyurethane depending on which kit is ordered. 2 Bolts One kit contains the following parts: 1 Ball Joint 1 Nut Standard or Polyurethane depending on which kit is ordered. 2 Bolts One kit contains the following parts: 2 Bushes 2 Nuts DESCRIPTION REQ. QTY PART NO. FRONT SUSPENSION - OVERHAUL KITS SUSPENSION - UPRATED PACKAGES RG1305 RG1187 RG1189 RG1186G RG1188G (1) RG1188SAG RG1186SAG RG1306 (1) (1) (1) (1) (1) (1) (Rotoflex) (Rotoflex) (Rotoflex) (Non Rotoflex) (Non Rotoflex) (Non Rotoflex) Rotoflex (Rotoflex) Ride adjustable suspension kit; Ride adjustable suspension kit; Ride/height adjustable suspension kit; Mk2 & early Mk3 Mk1 & late Mk3 Mk2 & early Mk3 Mk1 & late Mk3 Mk1 & late Mk3 Mk2 & early Mk3 CONVERSION BRACKETS REAR SHOCK ABSORBER Bracket kit & rear shocks (pr) (1) Bracket kit only Rotoflex models only. Available with Standard, Spax, Koni or Gaz shock absorbers. The bracket kit allows the top shock absorber mountings to be located onto the brackets which are in turn mounted directly onto the chassis. This offers a more positive location (directs stress loading away from wheel arches & on to chassis) and improves handling. The brackets are designed to be used with shock absorber GDA4011 which is available in either standard or a variety of uprated specifications. DESCRIPTION REQ. QTY PART NO. GAZ Packs include 2 uprated front springs, 4 adjustable shock absorbers with standard bushes. Packs include 2 uprated front springs, 2 front ride/height adjustable shock absorbers and 2 rear adjustable shock absorbers, all with standard bushes. GAZ Koni Packs include 2 uprated front springs, 4 adjustable shock Packs include 2 uprated front springs, absorbers with standard bushes. RG1186 RG1188 RG1186SA RG1188SA (1) (1) (1) (1) UPRATED 26 (Rotoflex) (Rotoflex) (Non Rotoflex) (Non Rotoflex) ADJUSTABLE (ON CAR) ADJUSTABLE (ON CAR) SHOCK ABSORBER SHOCK ADJUSTABLE (OFF CAR) Ride adjustable suspension kit; Ride/height adjustable suspension kit; TECH SPEC Mk1 & late Mk3 Mk2 & early Mk3 Mk1 & late Mk3 Mk2 & early Mk3 & FRONT SPRING PACKAGES SPRING & FRONT Specifically designed for each application. Individually tested until optimum in handling and comfort is reached. Will usually outlive your car. 28 point adjustment, dyno tested. Handbuilt, matching units. Also available with adjustable spring seat (front). Designed and developed by Motorsports Engineers. 2 year warranty. 36 point fine tune settings. Zinc plated bodies. Double lip seal + O’ ring on piston rod. Fully rebuildable. Top quality. Also available with adjustable spring seat (front). Each unit tested and supplied with individual dyno read-out. 3 year warranty. British made. Spax 4 adjustable shock Packs include 2 uprated front springs, absorbers with standard bushes. Packs include 2 uprated front springs, 2 front ride/height adjustable shock absorbers and 2 rear adjustable shock absorbers, all with standard bushes. Spax DESCRIPTION REQ. QTY PART NO. RL1359 RG1185 RL1358 RG1184

RL1358G RG1184G RL1358SA RG1184SA RL1358SAG RG1184SAG (1) (1) (1) (1) (1) (1) (1) (1) (1) (1)

(Rotoflex) (Rotoflex) (Rotoflex) (Rotoflex) (Rotoflex) (Non Rotoflex) (Non Rotoflex) (Non Rotoflex) (Non Rotoflex) (Non Rotoflex) SHOCK

Ride/height adjustable suspension kit; Ride adjustable suspension kit; Ride adjustable suspension kit; Ride adjustable suspension kit; Ride/height adjustable suspension kit; Mk1 & late Mk3 Mk2 & early Mk3 Mk1 & late Mk3 Mk2 & early Mk3 Mk1 & late Mk3 Mk2 & early Mk3 Mk1 & late Mk3 Mk1 & late Mk3 Mk2 & early Mk3

Mk2 & early Mk3 PACKAGES ABSORBER UPRATED Packs include 2 front ride/height adjustable shock absorbers Packs include 2 front ride/height adjustable shock absorbers and 2 rear adjustable shock absorbers, all with standard bushes. Spax Koni Packs include 4 adjustable shock absorbers with standard bushes. Packs include 4 adjustable shock absorbers with standard Packs include 4 adjustable shock bushes. Spax Packs include 2 front ride/height adjustable shock absorbers & 2 rear adjustable shock absorbers, all with standard bushes. Packs include 4 adjustable shock absorbers with standard bushes. Gaz Gaz DESCRIPTION REQ. QTY PART NO. REAR SUSPENSION (Non-Rotoflex) DESCRIPTION QTY REQ. PART NO. DESCRIPTION QTY REQ. PART NO. DESCRIPTION QTY REQ. PART NO.

GHF201 (MK3)

GHF332 (MK3) 128352 (MK1) GHF275 (2) 159641 (MK3) BH607221 (MK3) 102987 (8) WA112081 (2) GHF223 (A/R)

WB110061 (A/R)

149191 (MK3) GDA4011 GDA4011S GDA4011K 118599 (2) GDA4011G 149190 (MK3) GHF224 (2)

149189 (MK3) WD600071 (2) GHF224 (2) REAR SPRING SEE LISTINGS WM69 (2) C8939A (2)

BH607281(2) GHF224 (2) ILLUSTRATION SHOWS MK3 BH606181(2) LEAF SPRING AND RETAINING PLATE WD600071 (4) 132763 (RH) 132764 (LH)

119451 (4) GHF302 (4) BUSH GHF223 (4) 146321 (2) 146317 (2) (MK1) WD600071 (4) 159855 (2) (MK3) BH607281 (4) 146315 GHF223 (4) }(MK1) GHF302 (4) (RH) 133070 146316 (LH) }(MK3) 159841 (RH) REAR SUSPENSION GHF223 (4) 159840 (LH) (NON-Rotoflex)

SHOCK ABSORBER & FITTINGS VERTICAL LINK - RADIUS ARM Rear Suspension See also; ‘Suspension-Uprated Packages’. & PIVOT BRACKET NON-’Rotoflex’ system fitted to; Rear shock absorber (inc. bushes) Rear vertical link; All MK1’s to KC 50000 and Standard (Supplied in singles) (2) GDA4011 Right hand (1) 132763 MK3’s from KE/KF20001. Spax adjustable (Supplied in pairs) (1pr) GDA4011S Left hand (1) 132764 Koni adjustable (Supplied in pairs) (1pr) GDA4011K Bolt (Vertical link to rear inner hub) (2) BH607281 ROAD SPRING & FITTINGS GAZ adjustable (Supplied in pairs) (1pr) GDA4011G Nut (For bolt BH607281) (2) GHF224 Rear spring (Complete with bushes) Bushes only (Upper & lower) Washer (For bolt BH607281) (4) WD600071 Mk1 (‘Swing’ spring conversion kit) (1) RG1278 Standard (8) 102987 Radius arm; Converts to later swing spring. Includes spring, box section & fittings. Poly (8) 102987P Mk1 (2) 146317 Mk3 (‘Swing’ spring) (1) 159640 Bolt (Shock absorber mounting - Upper) (2) 118599 Mk3 (2) 159855 Bush only (Rear spring) Nut (For bolt 118599) (2) GHF275 Bush - Radius arm; Standard (2) C8939A Washer (For bolt 118599) (2) WA112081 Rear (Radius arm to vertical link) Poly (2) C8939AP Nut (Shock absorber mounting - Lower) (2) GHF224 Standard (2) 119451 Bolt - Rear spring locating (2) BH607281 Washer (For nut GHF224) (2) WM69 Poly (2) 119451P Located through top of vertical link. Front (Radius arm to pivot bracket) Nut (For bolt BH607281) (2) GHF224 Standard (2) 146321 Washer (For bolt BH607281) (2) WD600071 Poly (2) 146321P Retaining plate - Spring; POLYURETHANE BUSHES Bolt (Radius arm to vertical link) (2) BH606181 Mk1 (6 stud mounting) (1) 128352 Polyurethane bushes out-perform Nut (For bolt BH606181) (4) GHF223 Mk3 (4 stud mounting) (1) 159641 standard rubber bushes Washer (For bolt BH606181) (4) GHF302 Pad (Fitted to Mk3 only) (1) 149191 (without the jarring effect typical of nylon Bolt (Radius arm to bracket) (2) BH606201 Stud - Leaf spring to diff case (a/r) 131008 versions). Nut (For bolt BH606201) (4) GHF223 Stud 131008 not shown, refer to Rear Axle, for illustration. Washer (For bolt BH606201) (4) GHF302 Nut (For stud 131008) (a/r) GHF223 Rear pivot bracket; Washer (For stud 131008) (a/r) WB110061 Mk1 - Plate/clamp+ (Lower leaf) (1) 149189 Right hand (1) 146315 Tube/spacer+ (2) 149190 Left hand (1) 146316 Bolt+ (For spacer 149190) (1) BH607201 Mk3 - Nut+ (For bolt BH607201) (1) GHF201 Right hand (1) 159841 Washer+ (For bolt BH607201) (1) GHF332 Left hand (1) 159840 +Fitted to Mk3 models only. IF YOU REALLY WANT TO IMPROVE THE HANDLING, THEN Setscrew - Pivot bracket (Mk1 only) (4) SH606141 POLYURETHANE BUSHES ARE A GOOD START, THEY ALSO Not Illustrated HAVE A MUCH LONGER LIFE. REFER TO LISTINGS Shim - Adjusting (a/r) 133070 THROUGHOUT THIS CATALOGUE FOR FULL AVAILABILITY. Nut (Pivot bracket to body) (4) GHF223

27 DESCRIPTION QTY REQ. PART NO. DESCRIPTION QTY REQ. PART NO. DESCRIPTION QTY REQ. PART NO. REAR SUSPENSION (Rotoflex) GHF275 150583 (2) WC112081 (2) 150786 (4) WC112081 (2) WC112081 (2) 517666 (4) 148969 (2) 517667 (4)

GSA280 GSA280S GSA280K 308499 GSA280G C8939A (2)

GHF223 WB110061 (6) GHF224 (2) 128352 GHF275 (2) WD600071 GHF275 (2) 548208 (2) WC112081 (4) BH607321 (2) BH608221 (2) 149769 (RH) 149770 (LH)

148926 (8) GHF274 (2) 149003 (2) •151093 (3) 148939 (8) •JN2111 (2) GHF274 (2) •119450 (4) •151099 (2) 148950 (8) 148926 (8) 308437 (RH) 308438 (LH) GHF223 (4) •151110 (2) 148963 (2) BH607201 (2) 148940 (8) WC112081 (2) GHF275 (2) •151094 (2) BH607201 (2) 148975 (RH) 148948 (4) 148976 (LH) RADIUS ARM ASSEMBLY KIT REAR SUSPENSION 151092 (ROTOFLEX)

Tube/spacer (4) 148948 Water shield (8) 148939 Seal (Dirt) (8) 148950 Water shield (8) 148940 Bush only (inc. sleeve) (Upper & lower) Washer (Plain) (2) WC112081 Rear Suspension Standard (4) 517666 Nut - Nyloc (2) GHF275 ‘ROTOFLEX’ system fitted to; all MK2’s from Poly (inc. sleeve) (4) 517666P KC 50001 and MK3’s to KE/KF20000. Sleeve (Upper & lower bush) (4) 517667 Bolt (Shock absorber mounting - Upper) (2) 148969 RADIUS ARM & PIVOT BRACKET ROAD SPRING & FITTINGS Washer (For bolt 148969) (6) WC112081 Bracket/bolt; (Complete with bushes) Rear spring (1) 308499 Nut (For bolt 148969) (2) GHF275 To radius arm & lower shock absorber mounting, locates through Bush only (Rear spring) Bump stop (2) 150583 vertical link. Right hand (1) 148975 Standard (2) C8939A Screw (Bump stop to body) (4) 150786 Poly (2) C8939AP Left hand (1) 148976 Bolt - Rear spring locating (2) BH607321 VERTICAL LINK & LOWER WISHBONE Nut (Lower shock absorber mounting) (2) GHF275 Located through top of vertical link. Rear vertical link; Washer (For nut GHF275) (4) WC112081 Nut (For bolt BH607321) (2) GHF224 Right hand (1) 308437 Bolt (Bracket to radius arm) (2) BH607201 Washer (For bolt BH607321) (2) WD600071 Left hand (1) 308438 Nut (For bolt BH607201) (2) GHF274 Retaining plate - Spring (1) 128352 Lower wishbone; 6 stud mounting. Radius arm assembly - Adjustable (2) 151092 Right hand (1) 149769 Supplied in self assembly kit form per side. Stud - Leaf spring to diff case; Left hand (1) 149770 Includes parts listed here and in drawing. Marked• Items are available separately. Mk2 (6) 151824 Bush (Inner mounting) Radius eye - Rear• (2) 151094 Mk3 (Mk3 to KE20000) (6) 136818 Standard (2) 548208 Studs not shown, refer to Rear Axle, for illustration. Adjuster - Radius arm• (2) 151099 Poly (2) 548208P Supplied complete with locking nuts. Nut (For leaf spring studs to diff) (6) GHF223 Bolt (Inner mounting) (2) BH608221 Lock nut - Washer (For leaf spring studs to diff) (6) WB110061 Nut (For bolt BH608221) (2) GHF275 Right hand thread• (2) JN2111 Left hand thread• (2) 151110 Overhaul kit - Inner wishbone SHOCK ABSORBER & FITTINGS Radius eye - Front• (2) 151093 See also; ‘Suspension-Uprated Packages’ page 26, Standard bush (2) RG1113 & ‘Rear Shock Absorber Conversion Brackets’ page 26. Poly bush (2) RG1113P Bush (Radius eyes)• Standard (4) 119450 Rear shock absorber (Inc bushes); Per side. Not Illustrated. Includes; 1 bolt 149003, 4 bushes 148926, 2 spacer/tube Poly (4) 119450P Standard (Supplied in singles) (2) GSA280 148948, 4 water shield 148939, 4 dirt seal 148950, 4 water shield 148940, Pivot bracket (2) 148963 Spax adjustable (Supplied in pairs) (1pr) GSA280S 1 washer WC112081, 1 bush 548208, 1 bolt BH608221 & 2 nut GHF275. Bolt (Pivot bracket to radius arm) (2) BH607201 Koni adjustable (Supplied in pairs) (1pr) GSA280K Bolt - Wishbone to vertical link (2) 149003 Nut (For bolt BH607201) (2) GHF274 GAZ adjustable (Supplied in pairs) (1pr) GSA280G Bush (8) 148926 Nut (Pivot bracket to body) (4) GHF223 28 RSSPL KAS42 RSSPR RL1472 RL1470 RL1471 RL1473 RSRN38 XW466C XW466S KC4280L KC4282L RL1472B KC4280R KC4282R KACB101 KACH100 XW5729C KC4282L3 KC4282R3 RL14705.5 RL14735.5 (2) (2) (2) (2) (2) (2) (2) (2) (1) (16) OPTIONAL OCTAGONAL CENTRE KNOCK CAP & SPANNER. 3-EARED KNOCK CAPS ALSO AVAILABLE. (Bolt-on); (Hub adaptor to spline) (For ‘Octagonal’ centre nuts) Left hand Right hand Left hand Right hand 4.5Jx13” - Chrome (5) 4.5Jx13” - Painted5.5Jx13” - Chrome (5) Left hand (5) Right hand Left hand Right hand 2-Eared 3-Eared plainwith Triumph badge (4) (4) 5Jx13"5.5Jx13" (4) (4) 5.5Jx13" (1) 5Jx13" (1) REPLACEMENT WIRE WHEEL COMPONENTS Wheel centre only; Wheel nut only (16) Wheel only Minilite ‘Replica’ wheel set Minilite ‘Replica’ wheel wheel nuts. Includes 4 wheels, 4 centres and 16 ‘Eared’ centre knock cap; Cleaning brushCopper & hide hammerSpanner (1) (1) ‘Octagonal’ centre lock nut; Alternative to ‘Eared’ centre caps. Wire wheel only; Retainer nuts NOTE: ‘Eared’ centre caps not allowed in some countries. Hub adaptor/spline DESCRIPTION REQ. QTY PART NO. WIRE WHEELS ; ; RL1221/5.5 RL1221/4.5 RL1201/4.5 ALLOY ROAD WHEELS ROAD ALLOY 4.5Jx13” 5.5Jx13” 29 Look at our prices, CONVERSION KIT our wheel sets include 5 wheels! If you prefer your GT6 to look that little bit MINILITE REPLICA WHEELS MINILITE REPLICA Chrome wheels*Kit available with alternative octagonal centre lock nuts. Note; ‘Eared’ centre caps not allowed in certain countries. Please state preference when ordering. (1) Chrome wheels*Both wheel kits available with alternative octagonal centre lock nuts. Note; ‘Eared’ centre caps not allowed in certain countries. Please state preference when ordering. (1) Painted wheels (1) wheels, available in chrome, or painted silver. his kit gives you the option to fit wider section tyres to ‘fill the arches’. different, why not consider fitting a set of our wire Alloy Road Wheels Alloy Note: when fitting wire wheels, check length of wheel studs (and shorten if necessary) to ensure they do not foul the backs of wheels. Wire wheel conversion kit - Kits inc; 5 wheels, 4 splines, 4 two-eared centre knock caps*, 1 cleaning brush, 1 hammer and instructions. Wire wheel conversion kit - T Care should be taken in selecting the correct tyre width to avoid any clearance problems. Kit includes; 5 wheels, 4 splines, 4 two-eared centre knock caps*, 1 cleaning brush, 1 hammer and instructions. Wire Wheels Wire These replicas superb (lightweight) aluminium Minilite (used for of the original magnesium rallying), are available - in silver only - at an extremely attractive price, and they make a very interesting alternative to steel and wire wheels. These bolt-on 5Jx13” and 5.5Jx13" wheels are a direct replacement with the corresponding wheel nuts. DESCRIPTION REQ. QTY PART NO. GLZ225 RL1357 RL1271 RL1360 311346 716181 624632 155753 628097 811419 122806 811797 113087 GAT140 RX1508 RX1262 RX1443 RX1329 RX1344 RX1364 RX1399 GAC111 21A2818 523638A 21H5774 307405R 312046R 21H6210 GAC630F YKC1335 YKC1334 GAC2999 GAC9904 GAC630R RL1357SS 21H6210SS - ) 16) (1) (1) (1) (1) (1) (1) (4) (4) (4) (4) (5) (5) ( (16) (a/r) (a/r) (1pr) (1pr) (A/R) (A/R) - see photo (For wheel nut) (Singles) (Car set) (16 nuts) (Silver) (4) (Autoglym, 450ml) (Reconditioned) (Less badge) (252ml) (For centre trim) (Chrome) (4 nuts) (16 nuts) (225g) (Cleans and protects) (Stirrup type) (See ‘Accessories’ for photo); (Inc fittings) (For jack etc) (Inc fittings) (Reconditioned) ‘GT6’ ‘Triumph’ ‘GT6’ ‘Triumph’ Spring (Large - 400ml) Badge only - Mk3 Rear Front Optional factory fitment for Mk2 GT6. Centre trim Mk1 & Mk2 Stainless steel Locking Mk1 & Mk2 (16) Hub cap‘Rostyle’ Wheel trim (Mk2) (4) (4) Mk3 (Chrome) (16) Wheel trim (Mk1) (4) Mk3 (Stainless steel) (16 Chrome Washer (Mk3 only) Holts Radweld Alloy wheel seal ‘Warning’ triangleSafety jacket (Luminous)Scissor jack & handleTool bag (1) (1) (1) & Equipment ‘AA’ membership & relay pack (1) Roadside Tools Roadside Tools Mudflaps Mudflaps Silicone seal - spray. Wheel centre trim/badge Wheel centre trim/badge (Mk3 only); Standard - Steel; Road wheel Steel Road Wheels Road Steel Wheel nut braceTyre pump Spark plug spannerFire extinguisherFirst aid kitWD40 (1) (1) (1) (1) Wheel studWheel wax (16) Chrome wheel trim Wheel nut - Standard; Wheel trim/hub cap (Mk1 & Mk2); Wheel trim/hub Wheel nut set (Mk3 only); Chrome wheel trim NOW AVAILABLE DESCRIPTION REQ. QTY PART NO. CHROME WHEEL TRIM SET - RL1360 CHROME WHEEL TRIM CENTRE - 716181 ROAD WHEELS DESCRIPTION QTY REQ. PART NO. DESCRIPTION QTY REQ. PART NO. DESCRIPTION QTY REQ. PART NO. BRAKE SYSTEM Front Brakes DISCS & FITTINGS (All models) Brake disc Standard (each) (2) 213227 Uprated (pair) (1) 213227UR Bolt (Disc to hub) (8) 113150 Washer - Spring (For bolt 113150) (8) GHF333 Dust shield (Backplate); Right hand (1) 213232 Left hand (1) 213233 BRAKE PADS & FITTINGS BRAKE PAD SETS; Mk1, Mk2, & Mk3 Early (To KC56077, KE12389, KF12390) UPRATED Imperial calipers. DISCS & PADS. Brake pads (standard) EBC TURBO GROOVE Pads only (1) GBP132 DISCS & ‘GREEN STUFF’ Pads & fittings (1) RG1063 KEVLAR PADS. HANDED DISCS (RH/LH) Brake pads (uprated - Kevlar ‘Green Stuff’) WITH CURVED GROOVES & DIMPLES OFFER Pads only (1) GBP132GS SUPERB STOPPING POWER WHEN COMBINED WITH PADS. SEE ‘BRAKE KITS’ FOR LISTINGS. Pads & fittings (1) RG1063UR NOTE: GT6 BRAKE CALIPERS Mk3 Late (KE12390 & KF12391 onwards) Metric calipers. Depending upon the model/year, the brake calipers have different drillings/position for the caliper mounting Brake pads (standard) bolts, and the pistons/seals vary in size. Different pads/shims are also fitted, and the calipers have either metric or imperial threads for the hydraulic fittings. Pads only (1) GBP216 Please check carefully the type of calipers fitted. Pads & fittings (1) RG1064 Check your chassis number against our listings, then the caliper type fitted to your car. It is possible that Brake pads (uprated - Kevlar ‘Green Stuff’) the calipers could have been replaced (with non-original spec) by a previous owner. If you are in any doubt, Pads only (1) GBP216GS please phone with as much information as possible, vehicle details, caliper type, etc. Pads & fittings (1) RG1064UR SHIMS, PINS & CLIPS; (Front & Rear) Mk1, Mk2, & Mk3 Early (To KC56077, KE12389, KF12390) BRAKE KITS CALIPERS & FITTINGS Mk1, Mk2, & Mk3 Early (To KC56077, KE12389, KF12390) (Type 16P - IMPERIAL) Shim (each) (4) 27H2953 Imperial calipers. Pin (1/4”) & clip kit (4 pins & 4 clips) (1) GBK1003 Mk1 & Mk2 (Early) (To KC56077) Discs, pads & shoes (car set) Mk3 Late (KE12390 & KF12391 onwards) Caliper (see note above); Standard discs, pads & shoes (1) RG1289 Shim kit (4 shims) (1) GBK1019 Right hand (1) 307976 Uprated discs, pads & Pin (3/16”) & clip kit (4 pins & 4 clips) (1) GBK1002 Left hand (1) 307977 standard shoes (1) RG1289UR Piston - Caliper Mk3 (from KE12390 & KF12391 to KE/KF20000) Standard (4) 510792 BRAKE KITS (Front) Metric calipers. Stainless Steel (4) 510792SS Mk1, Mk2, & Mk3 Early (To KC56077, KE12389, KF12390) Discs, pads & shoes (car set) Imperial calipers. Standard discs, pads & shoes (1) RG1290 Repair kit (For 2 calipers) (1) 601960 Disc & pad set (2 discs & 4 pads) Uprated discs, pads & Bleed screw (2) 556508A Standard discs & pads (1) RG1059 standard shoes (1) RG1290UR Dust cap/cover (2) STC1913 Uprated discs & pads (1) RG1059UR Mounting bolt (Caliper) (4) 132439 Mk3 (KE/KF20001 onwards) Mk3 Late (KE12390 & KF12391 onwards) Metric calipers. (Non Roto driveshaft). Washer - Spring (For caliper bolt) (4) GHF335 Metric calipers. Discs, pads & shoes (car set) Disc & pad set (2 discs & 4 pads) Standard discs, pads & shoes (1) RG1291 CALIPERS & FITTINGS Standard discs & pads (1) RG1060 Uprated discs, pads & (Type 16PB - IMPERIAL) Uprated discs & pads (1) RG1060UR standard shoes (1) RG1291UR Mk2 Late & Mk3 Early (From KC56078 to KE12389/KF12390) Caliper (see note above); Right hand (1) 311852 Left hand (1) 311851 FRONT & REAR BRAKE KIT - STANDARD. Piston - Caliper ALSO AVAILABLE WITH UPRATED DISCS & PADS - SEE ‘BRAKE KITS’ FOR LISTINGS. Standard (4) 157685 Stainless Steel (4) 157685SS Repair kit (For 2 calipers) (1) 519731 Bleed screw (2) 556508A Dust cap/cover (2) STC1913 Mounting bolt (Caliper) (4) 132439 Washer - Spring (For caliper bolt) (4) GHF335 CALIPERS & FITTINGS (Type 16PB - METRIC) Mk3 Late (From KE12390 & KF12391) Caliper (see note above); Right hand (1) 159027 Left hand (1) 159026 Piston - Caliper Standard (4) 157685 Stainless Steel (4) 157685SS Repair kit (For 2 calipers) (1) 519731 Bleed screw (2) 556508A Dust cap/cover (2) STC1913 Mounting bolt (Caliper) (4) 132439 Washer - Spring (For caliper bolt) (4) GHF335

30 159230 521154 213690 218947 517662 517333 PJ8808 RTC488 RTC274 GBF103 GBF103 RX1327 RX1326 RX1327 RX1326 RH5272 GMC209 GMC219 606404A RTC253A GRK1077 kit is fitted. (1) (1) (1) (a/r) (a/r) (a/r) (a/r) (a/r) (a/r) for the original Girling available. (1 litre) (1 litre) (Girling) IMPORTANT NOTE: (Lockheed/universal) (1.0 litre) (0.5 litre) (1.0 litre) (0.5 litre) in this parts catalogue (to help identify factory (fitted to late Mk3’s only) are no longer The Lockheed (universal, remote mounted) a direct replacement Original Girling servo’s part no. 313095, All vehicles to KE/KF20000 All vehicles to 0.7” bore. Mk3 from KE/KF20001 0.75” bore. (1) Silicone Silicone Silicone Silicone All vehicles to KE/KF20000All vehicles (1) Unipart (DOT 3) All vehicles to KE/KF20000Mk3 from KE/KF20001 (1) (1) Mk3 from KE/KF20001 (1) All vehicles to KE/KF20000Mk3 from KE/KF20001 (1) (1) Unipart (DOT 3) the vehicle was new and not subsequent replacements. servo, but can be used if the entire COMPONENT & COMMISSION NUMBERS brake servo kit that we list here (RH5272) is not Where commission and/or component numbers are quoted specification changes), they refer to components/parts when DESCRIPTION REQ. QTY PART NO. Service/repair kit Use only for original Girling type servo part no. 313095. Vacuum hose - Manifold to servoFor original Girling type servo only. (1) Brake Servo Brake See Important Note above This universal, remotely mounted servo comes complete with brackets and fittings. It can be retro’ fitted to any GT6 (Mk1, Mk2 & Mk3), but NOT as a direct replacement for the factory fitted Girling servo. Brake master cylinder; Brake master Clevis pin - Push rodFiller capSeal - Filler capClutch/brake fluid; (1) SYSTEM TANDEM (DUAL) LINE (1) to special order only. Note; Tandem brakes factory fitted (1) Brake master cylinder; Brake Master Cylinder Master Brake LINE SYSTEM SINGLE Brake servo kit Master cylinder repair kit; Master cylinder Master cylinder repair kit; Reservoir & capClutch/brake fluid; (1) PC34 V5435 519799 519800 125217 209260 209259 149426 120124 504877 519760 120138 519758 519695 134529 114438 122289 150881 519802 519801 RG1197 GBS746 GDB101 17H4374 556508A UKC1261 UKC1258 GDB101R GWC1501 GWC1121 SH606071 (1) (1) (2) (1) (1) (4) (1) (1) (4) (4) (8) (2) (2) (2) (1) (1) (2) (2) (2) (Per car); (Wheel cylinder) 31 (Master cylinder) (GWC1121) (0.7” bore) (7/8” bore) (Fit in pairs) (0.7” bore) (GWC1501) (7/8” bore) (Handbrake); (Cylinder to back plate) (Per car) (NON-Rotoflex) (Clutch/brake) (NON-Rotoflex) (Brake shoe retaining) (KE/KF20001 onwards) (KE/KF20001 (Locates in trailing brake shoe) (Lever to cylinder) (Brake shoe pull off); (For 120138) (Brake shoe retaining) (Drum retaining) (Brake shoe retaining) Left hand New (2) Original type ReconditionedLeft hand (2) Replacement Right hand Mk3 (2) Mk1 & Mk2 (2) Replacement Original type Right hand Upper (Double coil) (2) Lower (Single coil) (2) Split pin Pedal rubbers Brake drum; Tab washer*Bolt - Tab washer*Spring (8) Cup washer (4) Wheel cylinder; Wheel cylinder repair kit Spring Dust cover - backplate Bleed screw (2) Screw Springs Retaining plate Operating lever Brake back plate; Brake light switch (1) Brake Pedal & Fittings Pedal Brake Spring - Pedal returnRubber boot/cover (1) *Locates brake backplate to vertical link 132763/4. *Locates brake backplate to vertical Brake shoe retaining kit & 8 cup washers. Per car; Includes 4 pins, 4 springs Pin (1) Rear Brakes Rear Mk3 Late Driveshafts Late NON-Rotoflex shoes - SELF ADJUSTING 1. 5” Rear brake set Brake shoe ‘H’ tappet DESCRIPTION REQ. QTY PART NO. PC34 V5435 149426 120138 519758 120139 123135 209259 214817 214818 121860 121862 120124 504877 105689 105690 519762 507865 203077 209260 GHF200 GHF321 RG1197 GBS750 18G9004 18G9004 18G8642 556508A 17H4374 GWC1208 GWC1202 GWC1202 GWC1110 SH606071 (1) (2) (1) (1) (2) (2) (2) (2) (2) (4) (2) (2) (4) (4) (2) (2) (2) (2) (2) (1) (1) (1) (4) (4) (1) (4) Mk3 To KE/KF20000. Mk3 To (Per car); (Wheel cylinder) (5/8” bore) (5/8” bore) (ROTOFLEX system) (3/4” bore) (3/4” bore) (NON-Rotoflex system) (Single coil) (Double coil) (ROTOFLEX system) (NON-Rotoflex system) (Handbrake) (Rh & Lh) (Per car) (Cylinder to back plate) (Brake shoe retaining) (Lever to cylinder) (To KE/KF20000) (11/16” bore) (All models) (5/8” bore) (All models) (5/8” bore) (To KE/KF20000) (11/16” bore) (Brake shoe pull off); (For nut GHF200) (For 120138) (Brake shoe retaining) (Drum retaining) To KC7278 From KC7279 Right hand Left hand From KC7279 Right hand Left hand To KC7278 (Adjuster to backplate) (Brake shoe retaining) Mk2 Mk3 Mk1 - Mk2 & Mk3 - Lower spring Mk1 - Mk1 - Upper spring Mk2 Mk3 Retaining plate Washer Wheel cylinder; Brake back plate; Pin **MK2 & Mk3 ROTOFLEX system; Locates brake backplate to vertical **MK2 & Mk3 ROTOFLEX system; link 132763/4. Brake shoe retaining kitPer car; Includes 4 pins, 4 springs & 4 cup washers. (1) *Mk1 Only NON-Rotoflex system: Locates brake backplate & oil seal *Mk1 Only NON-Rotoflex system: Locates housing to inner hub 204226. Tab washer** (4) Bolt - Tab washer** (8) 1.25”Rear brake shoes - MANUALLY ADJUSTED 1.25”Rear brake set Brake shoe Mk1, Mk2, & Mk3 Early. Mk2, & Mk3 Mk1, & Early ROTOFLEX Early NON-Rotoflex Driveshafts Rear Brakes Rear Spring Dust cover- backplate Bleed screwOperating lever Split pin (2) Tab washer*Bolt - Tab washer* (8) (4) Spring Cup washer Springs Adjuster assemblyNut (2) Wheel cylinder repair kit Brake drumScrew (2) DESCRIPTION REQ. QTY PART NO. BRAKE SYSTEM DESCRIPTION QTY REQ. PART NO. DESCRIPTION QTY REQ. PART NO. DESCRIPTION QTY REQ. PART NO. BRAKE SYSTEM

FOR FIRMER BRAKE PEDAL PRESSURE, STAINLESS STEEL BRAIDED HOSES. CAR SET RG1292GR. ALSO AVAILABLE SINGULARLY.

Brake Pipes & Hoses BRAKE HOSES Front flexible hose; Standard (2) GBH203 Goodridge (Braided) (2) GBH203GR Rear flexible hose; Standard Right hand (1) GBH203 Left hand (1) GBH204 Goodridge (Braided) Right hand (1) GBH203GR Left hand (1) GBH204GR Goodridge Brake Hose Set (1) RG1292GR Car set inc, 4 braided hoses, see photo. BRAKE PIPE KITS Copper brake pipe kit (Single line system); Car set; includes all brake pipes fully made up to correct length with Handbrake & Cable imperial fittings, but not hoses. Mk1 (NON-Rotoflex) - HANDBRAKE & FITTINGS FRONT CABLE FITTINGS RHD (1) RG1194 Ratchet type handbrake. Nut - Adjusting (Cable to fork) (1) GHF200 LHD (1) RG1194LHD Handbrake lever assembly (1) UKC6691 Fork (Front cable to handbrake lever) (1) 104749 Mk2 & Mk3 (ROTOFLEX) - Gaiter (Handbrake lever) (1) 705789 Nut - Square (Locates inside fork) (1) NQ2707 RHD (1) RG1067 Grip (Lever) (1) UKC3918 Clevis pin (Fork to handbrake lever) (1) 104750 LHD (1) RG1067LHD Spring (Fits on release rod/button) (1) 104740 Split pin (Clevis pin retaining) (1) PC5 Mk3 (NON-Rotoflex) Pawl (1) 104737 Washer (Split pin to lever/fork) (1) GHF300 RHD (1) RG1068 Pin (Pawl to lever) (1) 104738 Relay/equaliser lever (Inc bush) (1) UKC1788 LHD (1) RG1068LHD Ratchet (1) 148083 Bush only (For lever UKC1788) (1) 121757 Fulcrum pin (1) 104743 Seal; Copper brake pipe kit (Tandem/Dual line system); Lever & ratchet to mounting bracket. Upper (Felt) (For bush 121757) (1) 121760 Car set; includes all brake pipes fully made up to correct length with Circlip (Fulcrum pin locating) (1) AS610032 imperial fittings, but not hoses. Lower (Rubber) (For bush 121757) (1) 121755 Washer (Circlip to fulcrum pin) (1) WA112081 Mk3 (NON-Rotoflex) - Pivot pin (Relay lever to body) (1) 121759 RHD (1) RL1220 Tab washer (For pivot pin 121759) (1) 121758 LHD (1) RL1220LHD HANDBRAKE CABLE & FITTINGS Junction/manifold - Brake pipe; Front cable (Short) (1) 121766 Cable runs from handbrake lever to compensator lever UKC1788. REAR CABLE FITTINGS 3 way connector (1) BTB657 Rear (Main) Cable; Compensator (Main cable to equaliser UKC1788) (1) 121699 4 way connector (1) 565719 Cable runs from compensator to rear brakes. Clevis pin (Compensator to equaliser) (1) PJ8807 Clip - Brake pipe; Mk1 (NON-Rotoflex) (1) 133915 Split pin (For clevis pin PJ8807) (1) PC10 Plastic clip (Single) (a/r) GHF1192 Mk2 & Mk3 (ROTOFLEX) (1) 149353 Washer (For clevis pin PJ8807) (1) GHF301 Plastic clip (Double) (a/r) 625521A Mk3 (NON-Rotoflex) (1) 159848 Pull-Off spring (Handbrake) (2) 131806 ‘L’ bracket (Pull-off spring anchor) (2) 131807 BRAKE/CLUTCH FLUIDS Nut (For bracket 131807 - 2 per bracket) (4) GHF200 Fork (Cable to operating lever) (2) 104749 BRAKE FLUID Nut - Square (Locates inside fork 104749) (2) NQ2707 Unipart (DOT 3) (1 litre) (a/r) GBF103 Clevis pin (Fork to lever) (2) 104750 Silicone (0.5 litre) (a/r) RX1327 Split pin (Clevis pin retaining) (2) PC5 Silicone (1.0 litre) (a/r) RX1326 Washer (Split pin to lever/fork) (2) GHF300 Operating lever - Cable to wheel cylinder; Manually adjusted brakes (Rh & Lh) (2) 123135 SILICONE BRAKE/CLUTCH FLUID Self adjusting brakes - Unlike normal brake/clutch fluids, Silicone fluid Right hand (1) 519800 does not absorb moisture. Left hand (1) 519799 This will avoid corrosion in the system (and under strenuous braking conditions tends not to boil). Also, it won’t harm paintwork if spilt. Note; before filling with Silicone fluid, the entire hydraulic system should be flushed out. Do not mix with standard fluid.

32 154177 608462 132135 127651 158459 152597 718813 209423 155621 140549 209688 122719 122718 708479 611974 611013 621968 611011 609639 GHF272 24G1345 FAM1718 219061/1 UKC27191 BH605101 (1) (2) (1) (2) (1) (1) (1) (1) (1) (1) (1) (1) (1) (2) (1) (2) (1) (1) (1) ) (Rh) (Mk2/Mk3 (Mk1) (NON-overdrive) MOUNTNEY WOOD RIMMED - MOUNTNEY WOOD RIMMED RL1466 (Rh fit) (Rack to column shaft) (Dash mounted) (Factory option) (Steering lock) (Column lock) (Upper/outer column clamp) (Steering knuckle to rack/shaft) (Steering shaft) (to KE/KF20000) (Standard fit) (from KE/KF20001) (Standard fit) (Upper & lower column) (Steering shaft) (Trafficator cancelling) (For bolt BH605101) Mk3 Mk1 & Mk2 Lighting (3 position) Lighting & Indicator MK1, Mk2 & Mk3 models. Rh or Lh. Overdrive & indicator switch MK1 & Mk2 only, when column mounted overdrive switch fitted Dipswitch (2 position) Mk1 & Mk2 Mk3 Mk3 (1) Indicator (All) DESCRIPTION REQ. QTY PART NO. Nut Starter/ignition switch only; Dash mounted Shear bolts STEERING SHAFT & FITTINGS NOTE; Steering column lock/ignition switch was offered as a factory fitted option for Mk1 & Mk2. Bearing Steering knuckle OUTER COLUMN & FITTINGS Outer column tubeSlip ring/insulatorCover/Escutcheon (Column switches); NOTE: Light switch only fits on left hand side of column. (1) (1) Labels/instructions (for Covers); Steering Column & Fittings Column lock & keys (Less switch); NOTE; Steering column lock/ignition switch was offered as a factory fitted option for Mk1 & Mk2. Pinch bolt Lock barrel/key (Mk1 & Mk2) (1) Shroud/cover Upper steering column assembly (1) Clip Lower steering shaftWasher End cap (1) Spring clip RL1466 160038 105438 142534 204741 608462 159761 150277 RR1370 RR1170/13 RR1170/14 RR1173/13 RR1173/14 (1) logo) (1) 33 logo) (1) (Horn push) ‘Shield’ MOTO-LITA LEATHER RIMMED - MOTO-LITA LEATHER RR1173 ‘Triumph’ KIT Semi-dished) (1) RACK SOLID 13” (Woodrimmed - Mk1 & Mk2 ( Mk3 ( 14” (Woodrimmed - Flat)13” (Leather - Flat)14” (Leather - Flat) (1) (1) (1) 13” (Woodrimmed - Flat) (1) STEERING MOUNTING Solid Mounting Kit (alloy)Replaces original rubber mountings and clamps. Provides more positive feel to steering. Note: also transmits more road noise and vibration. (1) ‘Mountney’ Sports steering wheel & boss; Nut - Wheel securingHorn push; (1) & Fittings ORIGINAL Original type steering wheel (1) AFTERMARKET Complete with boss & fittings. ‘Moto-Lita’ Sports steering wheel & boss; Steering Wheel Clip - Horn pushSlip ring/insulator (1) (1) ‘Pencil’ connector DESCRIPTION REQ. QTY PART NO. 128022 139386 133875 156024 306829 306830 GSJ158 GHF272 GHF222 GHF301 RTC2218 RTC2219 139386P 129961R 306829R 306830R FAM1718 BH605101 306829HR 306830HR RTC2218-9 (1) (1) (1) (1) (2) (1) (4) (4) (1) (1) (2) (2) Y Y (Exchange) (Exchange) (Rack to body) (Rack to column shaft) Y DA Y DA stock availability for you. (For ‘U’ bolt 156024) (Inc nyloc nut) (Includes gaiters, less track rod ends);

(For ‘U’ bolt 156024) (Steering knuckle to rack/shaft) If the part you require is not listed here,

New (High ratio)New (High ratio) (1) (1) New (1) Reconditioned Reconditioned New (1) (For bolt BH605101) (Track rod end to track rod 129961) EVER EVER Pair Left hand Right hand Poly (2) Standard (2) RHD - LHD - please enquire, we can check factory parts listings and MOTO-LITA WOOD RIMMED - MOTO-LITA WOOD RIMMED RR1170

MORE STOCK MORE STOCK Track rod & inner ball joint (2) Steering knuckle Nut Washer - Plain Track rod end Nut Rack gaiter; MOUNTINGS Rubber mounting Steering rack Steering Rack & Mounting DESCRIPTION REQ. QTY PART NO. Reinforcing plate‘U’ bolt/clampNut - Nyloc (2) (2) Pinch bolt STEERING DESCRIPTION QTY REQ. PART NO. DESCRIPTION QTY REQ. PART NO. DESCRIPTION QTY REQ. PART NO. Engine Electrics - Engine Electrics - Windscreen ELECTRICAL Major Units Ignition System Wiper/Washer System Alternator - Dynamo - Starter Plugs - Leads - Distributor - Coil. Wiper motor (Less drive gear); Starter motor; DISTRIBUTOR Mk1 (1) 515658R Reconditioned (Exchange) (1) GEU9405 Distributor (Delco Remy) (Exchange); Mk2 & Mk3 (1) 517621 Uprated high torque (see photo) (1) GEU9405UR Mk1 - Recon (Delco Remy D202) (1) 213186R Drive gear (Wiper motor); Solenoid (Starter motor) (1) 134174A Mk2 - Recon (Delco Remy D200) (1) 215511R Mk1 (1) 513962 Dynamo (Mk1 only) (Exchange) (1) GXE3101 Mk3 - Mk2 & Mk3 (1) 520101 Control box - Dynamo (Mk1 only) (1) GEU6606 Recon (To KE10000 Delco Remy D200) (1) 215511R Mounting bobbin - Alternator - Reconditioned (Exchange); Recon (From KE10000 Delco Remy D204) (1) 218173R Wiper motor (Mk1) (3) 17H5431 All alternators are Negative Earth, and are supplied less fan & pulley. (All) Pulleys & fans are available if required for the following alternators only. Distributor cap (1) GDC109 Seating pad - Mk1 (11ac) (Factory option) (1) GEU2202 Rotor arm (All) (1) GRA2110 Wiper motor (Mk2/Mk3) (1) 150844A Mk1 Conversion Kit (16ACR) RV6043 Condenser (All) (1) GSC104 Holding strap - Mk2 & Mk3 (16ACR) (1) GXE8211 Contact breaker points (All) (1) GCS105 Wiper motor (Mk2/Mk3) (1) BHA4790 Fan belt; Screw (Contact breaker points) (1) 511842 Wiper rack (All) (1) RTC202A Mk1 (To KC/KD7905E) (1) GCB11125 Low tension lead (1) 513994 Wheel box; Mk1 (Late) (From KC/KD7906E) (1) GCB11088 ELECTRONIC IGNITION KIT Mk1 (2) 37H7738 Mk2 (To KC76718) (1) GCB11125 Mk2 & Mk3 (2) 155430 Mk2 (From KC76719) (1) GFB11162 Bush kit - Wheel box (All) (2) 519988 Mk3 (1) GFB11150 Nut - Outer (Wheel box) Hexagonal (early) (2) RF4100 UPRATED HI-TORQUE Octagonal (late) (2) 520205 Wiper arm; STARTER MOTOR Mk1 (Silver) (Rh & Lh) (2) 130034 Mk2/Mk3 (Silver) (Rh & Lh) (2) UKC1285 Mk2/Mk3 (Black) (Rh & Lh) (2) UKC1285B Wiper blade; Mk1 (Silver) (2) GWB112 ELECTRONIC IGNITION KIT Mk2 (Silver) (2) GWB118 Kit offers maintenance free ignition system (in place of contact Mk3 (Black) (2) GWB199B points) with improved performance and fuel economy. Mk3 (Silver) (2) GWB199S Newtronic/Piranha electronic Wiper switch only (Mk1) (Twin speed) (1) 143841 ignition kit (1) RG1255 Washer pump only - manual (Mk1) (1) GWW110 Fits as direct replacement. Knob - for pump GWW110 (1) 609946 Starts engine regardless Wiper switch/washer pump (Mk2 & Mk3); of compression or PLUGS - LEADS - COIL Lucas type (1) 155495L temperature. Up to 200% more Spark plug Knob (For switch 155495) (1) 725374 cranking power using Standard (6) GSP4362 Washer bottle (All) (1) 609172 up to 50% less current. Double copper core (6) GSP6462 Mounting bracket (Bottle) (1) RTC2392 Uprated Hi-Torque Starter motor (1)GEU9405UR Plug lead set Washer pipe & jet kit (1) RL1119 All models. Outright sale, no exchange. Standard (1) GHT142 Includes; 2 jets, I ‘T’ piece, 1 grommet and 3 metres of tubing. Silicone (1) GHT142S Washer jet (2) GWW802 Plug spanner (1) GAT140 ‘T’ piece (1) 612601 Ignition coil; Grommet (1) 61917 Standard - Tubing (Sold per metre) (a/r) GWW201M Mk1 & Mk2 (12 volt) (1) GCL110 Non return valve (1) 618120 Mk1 & Mk2 (12 volt) (1) GCL110L Original Lucas. Mk3 (6 volt) (Ballast resistor type) (1) GCL132 HELP US TO HELP YOU Performance - If you are not sure which part/part number you require, Mk1 & Mk2 (12 volt) (1) GCL110HP to help ensure you receive the correct component, Mk3 (6 volt) (Ballast resistor type) (1) GCL132HP wherever possible please quote: Ballast resistor (Mk3 only) (1) 134176A MODEL, YEAR, CHASSIS AND/OR ENGINE NUMBER PLUS ANY COMPONENT INFORMATION.

PERFORMANCE IGNITION PARTS

34 WP5 WL205 518042 518041 518042 121356 147551 516301 147592 131608 510761 217025 511800 511802 511803 TKC940 GLB382 GLB380 GLB382 GLB382 GLB382 GLB380 RS2018 HN2005 PMP308 520091* TKC940L 37H5520 37H6928 RTC1175* RTC1176* RTC1177* RTC1174* (2) (2) (2) (2) (2) (10) (10) (Mk2) (For nut HN2005) (For nut HN2005) (Amber lens) (Amber lens) (Amber lens) (Amber lens) Stop/tailReverse (2) (2) FlasherFlasher (2) (2) Stop/tailReverseKit of 6 (2) (2) (1) Lenses to lampLamp to body (2) (2) Mk2 Rear flasher lamp Mk1 Mk2 Stop/tailReverse (2) (2) Mk1 Flasher (2) Lens to lampLamp to body (2) (2) FRONT SIDE/FLASHER FRONT LAMPS REAR LAMP BULB HOLDER KIT - MK3 - RS2018 Nut - Rear lamp retaining (10) Washer - Flat Bulb holders; Bulbs; Gaskets; Washer - Spring Mounting plinth - Lens only - Rear flasher lamp; Bulb onlyReverse lamp assembly•Lens only (Clear)•Bulb• (2) (2) (2) (2) Rim (Lens retaining) (2) Rear lamp lens kit (2) Rear flasher lamp assembly; •Mk1 & Early Mk2 only. For Late Mk2 Reverse Lamp please refer to: Number Plate Lamp (Mk2). GT6 MK3 Rear lamp assemblyIncludes 1 each of items shown with* below. Lenses only; (2) Rear Lamps & Fittings Rear Lamps GT6 MK1 & MK2 Rear stop/tail lamp assemblyLens only (Red) (2) Screw - lens retainingBulb only (2) (2) (2) Gasket; DESCRIPTION REQ. QTY PART NO. 154049 520082 516306 121355 121356 520083 516308 516304 508162 GLB989 GLB382 GLB382 GLB207 7H5182 37H6928 37H5520 UKC5992 RR1175 (2) (2) (2) (2) (2) (2) (Round) (Round) 35 (Flasher lamp) (Side lamp) (Lens) (Lens retainer) Side (2) PeakedFlasher (2) (2) Curved (2) CurvedPeaked (2) (2) Gasket (4) Bulb only; Lens only - Clear Lens only - Amber Amber lens only; Rubber boot/bodyBulb only (2) GT6 MK2 & MK3 Front side/flasher lampClear lens only; (2) (2) Rim Bulb only (2) Lens to lamp base & lamp to bodywork. Chrome rim Front flasher lamp assembly Front Side/ Front Flasher Lamps GT6 MK1 Front side lamp assembly DESCRIPTION REQ. QTY PART NO. Headlamp Stoneguards (pair)Mk1 & Mk2 only. Clip on. (1) 9403 S5400 S5400I PJZ602 119072 GLU132 GLU104 GLU133 GLU513 GLU515 GLU583 GLB410 GLB411 GLB472 GLB484 GLB476 S5400S RB7129 RB7082 RB7160 RB7409 GLB2983 515218A 27H5976 GLB472X BAU2110 BAU2111 BHM7058 (2) (2) CONVERSION KIT HALOGEN HEADLIGHT (in steel) (Complete) Sealed beam/with pilotBulb type/with pilot (2) (2) Sealed beam/no pilot (2) Inner seat onlyOuter only (2) RHD (no pilot) (2) RHD (with pilot)LHD (exc. France) (2) (2) LHD (with pilot) (2) LHD (no pilot) (2) Cadmium yellow (2) Clear (60/55w)LHD (with or without pilot)LHD - France (pilot type) (2) (1) (1) Clear (45/40w)RHD (with or without pilot) (2) (1) LHD (with or without pilot) (2) RHD (with or without pilot) (2) Clear - Xenon (55/60w) (pair) (1) Clear - Uprated (100/80w)Yellow (55/60w) (2) (2) Clear (55/60w) (2) HEADLAMP STONE GUARDS Mk1 & Mk2 only. For Mk3 headlamp finisher refer to BODY PARTS & FITTINGS - Bonnet & Front Panels. Screws to backing bowl. Screw - Rim retainingCable & connector (loom) (6) Backing bowl Plastic outer bowl, steel inner seat & outer rim (515218A) Backing bowl HEADLAMP BOWL & ADJUSTMENT Headlamps & BULBS HEADLIGHT UNIT (GLASS) Light unit (Sealed beam); Gasket - Bowl to bodyHeadlamp adjuster kitOuter retaining rim (2) (2) (2) Outer chrome rim (2) Light unit (replacement bulb type); Bulb (for GLU513/5) - non halogen; Halogen conversion kit; Light unit (Halogen type); Halogen bulb (for above); DESCRIPTION REQ. QTY PART NO. ELECTRICAL DESCRIPTION QTY REQ. PART NO. DESCRIPTION QTY REQ. PART NO. DESCRIPTION QTY REQ. PART NO. ELECTRICAL Rear Number Plate Lamp REAR NUMBER Switches & Controls PLATE LAMP Mk3 MK1 & MK2 (Mk2 to KC75000) COLUMN MOUNTED SWITCHES - Number plate lamp (Chrome) (UK spec) (1) 127916 Bulb only (1) GLB989 519582 Mk1, Mk2 & Mk3 Lens only (1) 601721A Steering column lock & keys (Less switch); 626859 NOTE; Steering column lock/ignition switch was offered as a factory MK2 (Mk2 from KC75001 - includes Reverse Lamp) ‘TRIUMPH’ fitted option for Mk1 & Mk2. Reverse & No plate lamp housing (1) 817385 BADGE Mk1 & Mk2 (Factory option) (1) 132135 COMPLETE Number plate lamp assembly (2) UKC7274 FR1202 (3) Mk3 (Standard fit) - Button type lamp. 626859S ‘TRIUMPH’ to KE/KF20000 (1) 219061/1 Lens only (For No. plate lamp UKC7274) (2) 510875 INSERT ONLY from KE/KF20001 (1) UKC27191 Bulb only (For No. plate lamp UKC7274) (2) GLB233 (SELF ADHESIVE) Starter/ignition switch only (Mk3) (1) 158459 Rim-cover (For No. plate lamp UKC7274) (2) BAU1797 GLB207 Shear bolts (Column lock) (2) 152597 Reverse lamp assembly (1) 153965 Shroud/cover (Steering lock) (1) 718813 518031 Lens only - Reverse lamp (1) 510762 518032 Lighting stalk/switch; Bulbs only; Mk1 (3 position) (1) 147278 Number plate (2) GLB501 Side, main, dip & flash. Reverse lamp (1) GLB382 215823 Mk2 & Mk3 (2 position) (1) 152616 GLB207 Main, dip & flash. MK3 (UK Spec) (Illustrated) Indicator stalk/switch (1) 158966 No. plate lamp assembly (Inc badge) (1) 718028 Overdrive stalk/switch (Mk1 & Mk2) Chrome cover only (1) 519582 RHD (1) 147280 Gasket only (Cover to lamp base) (1) 215823 ‘Triumph’ badge complete (1) 626859 LHD (1) 147281 Retaining clip (3) FR1202 Cover/Escutcheon (Column stalks/switches); For badge 626859 to chrome cover. Lighting & Indicator (2) 708479 ‘Triumph’ badge/insert only (1) 626859S NON-overdrive. Self adhesive. Overdrive & indicator switch (1) 611974 Lens only; WC106041 (2) MK1 & Mk2 only, when column mounted (right hand) WL205 (2) overdrive switch fitted. Right hand (1) 518032 Labels/instructions (for Covers); Left hand (1) 518031 HN2005 (2) Lighting (3 position) (Mk1) (1) 611013 Bulb only (2) GLB207 718028 Dipswitch (2 position) (Mk2 & Mk3) (1) 621968 Nut (Number plate lamp fixing) (2) HN2005 Indicator (All) (Rh column fitting) (1) 611011 Washer - Spring (For nut HN2005) (2) WL205 Horn push; Washer - Flat (For nut HN2005) (2) WC106041 Mk1 & Mk2 (‘Shield’ logo) (1) 150277 Mk3 (‘Triumph’ logo) (1) 159761 MK3 (USA Spec) Vehicles to KF20000 ‘Pencil’ connector (Horn push) (1) 142534 No. plate lamp assembly (Inc badge) (1) 718028 Clip - Horn push (1) 204741 Located on bumper bar. Slip ring/insulator (1) 608462 Chrome cover only (1) 519582 Gasket only (Cover to lamp base) (1) 215823 DASH MOUNTED SWITCHES - ‘Triumph’ badge (Complete) (1) 626859 Retaining clip (3) FR1202 GT6 Mk1 (UK Spec) For badge 626859 to chrome cover. Starter/Ignition switch (Mk1) (1) 127651 ‘Triumph’ badge/insert only (1) 626859S For Mk3 refer to column mounted switches. Self adhesive. Barrel & keys only (1) 24G1345 Lens only; Interior light switch (Toggle) (1) 143843 Right hand (1) 518032 Wiper switch (2 speed) (Toggle) (1) 143841 Left hand (1) 518031 Knob - Wiper switch (1) 704875 Bulb only (2) GLB207 Master light switch (Toggle) (1) 145203 Vehicles from KF20001 Heater fan switch (2 speed) (Toggle) (1) 142592 Number plate lamp; Fitted directly onto bodywork, either side of number plate. FRONT FOG LIGHTS Chrome (2) PRC1229 DASH MOUNTED SWITCHES - Black (2) UKC9173 GT6 Mk2 & Mk3 (UK Spec) Bulb (Festoon) (2) GLB239 Fog Lights Starter/ignition switch (Mk2) (1) 127651 For lamps PRC1229/UKC9173. For Mk3 refer to column mounted switches. Front fog light (Pair) (1) RX1370 Barrel & keys only (1) 24G1345 Rear fog light (Each) (2) RB7092 Hazard warning lamp (Mk2 & Mk3) (1) 156044 Cruise Lights - Heated rear window switch (1) 150377 Front & Rear (USA Spec) Interior light switch (Vertical Rocker) (1) 150379 Cruise lamps fit on front & rear wing sides. Interior Lighting Master light switch (Vertical Rocker) (1) UKC8647 See also; Switches & Controls - Miscellaneous. Wiper switch/washer pump (Mk2 & Mk3); Cruise lamp kit (Front/rear) (1) RL1361 Lucas type (1) 155495L Includes 2 amber and 2 red cruise lamps. Roof lamp (1) 718574 Knob (For switch 155495) (1) 725374 Cruise lamp only; Bulb (Festoon) (1) GLB239 Front - Amber (2) 158561 Replacement bulb for both roof & tailgate lamp. Rear - Red (2) AEU1028 MISCELLANEOUS SWITCHES - Mk1, Mk2 & Mk3 REAR LAMPS Oil pressure switch (1) GPS117 Temperature transmitter (1) GTR108 Brake light switch (1) 134529 Overdrive switch (Mk3 only) (1) 520999A Located in gear lever knob. Reverse light switch (1) BAU1074A Overdrive inhibitor switch (1) BAU1074A Door courtesy light switch (Fits on ‘A’ post); Mk1 & Mk2 (2) 606240 Mk3 (Plastic) (2) AAU1876A Tailgate courtesy light switch (1) AAU1876A

36 to RL1108 AH 516377 515873 131114 613155 142087 619864 132068 806707 RX1410 143943 AED172 GPS117 GBY5609 GBY5606 RX1352 GAC7106 UKC1361 RB7050 11K2846 RX1351/0 . RX1351/OW RX1410 (1) (1) (1) (1) (1) (1) (1) (Inc gauge, pipe) (6 & 12 volt- conventional) (RHD or LHD) (battery seating) chairs and general leisure use (inc. gauge, pipe) and off, automatically. providing they use a 12 volt battery; without the danger of overcharging. (for remote mounting of gauge) ), this superb product constantly revitalises (copper) (for adaptor 11K2846) Can also be used for these applications RHD (1) LHD (1) housing (1) AH The battery charger that turns on Suitable for all 12 volt batteries (from 5 ‘Positive’- (to solenoid); RHD or LHD (1) ‘Negative’ RodWing nut (2) (2) Retaining bar (1) Mk1 & Mk2 (Premium)Mk1 & Mk2 Mk3 (Premium) (1) (1) the battery cells - helping to extend cell life, Designed to be left connected for long periods. Use without disconnecting vehicle electrics. L.E.D. battery condition display. Thermal cut-out facility. 12 month guarantee. Battery Conditioner Kit - gauge kit Oil pipe to blockTemp sender to water pump (1) Caravans, lawn mowers, motorbikes, motor boats, wheel Comes complete with all fittings & operating instructions. BATTERY CONDITIONER 100 LOOK AT THESE BENEFITS; ● ● ● ● ● CHARGER BATTERY Conventional type 6v/12v GAC7106 Battery conditioner (1) Battery lead & clamp; Battery lead Cable (solenoid to starter) Battery bracket fixing kit (1) Battery Tray/BoxMat - rubber (1) Auto on/off - see accessories. Auto on/off - see Battery charger & wing nuts. Includes retaining bar, clamp rods parts); Battery fixings/clamps (Individual Battery & Fittings & Battery (Wet charged); Battery by mail-order. Batteries NOT available DESCRIPTION REQ. QTY PART NO. Oil pressure and water temp Bracket Adaptor Washer ‘T’ piece (1) Oil pressure gauge kit Required when fitting oil pressure gauge kit if retaining low pressure warning light. Oil pressure switch (1) 600396 600396 144370 128484 GLB987 GSD111 GSD115 150162R 159611R 215044R 143577R 145002R 150163R 213514R 215038R 215038R 218819R 213516R 215042R 215042R 218823R 213190R 148876A (Recon); (1) (1) (1) (1) (a/r) (Recon); AIR HORNS RX1381 (Recon); 37 (Mk3 to KE/KF20000) (Recon); (Recon); (Speedo cable) (Rev counter cable) (Mk3 from KE/KF20000) to KE/KF20000from KE/KF20001 (1) (1) to KE/KF20000from KE/KF20001 (1) (1) (All Instrument illumination/warning) Mk3 Mk2 & Mk3 Mk2 & Mk3 (1) Rev counter 213190 has Flasher/Indicator Warning light. Mk2 & Mk3Rev counter 215044 has Flasher/Indicator Warning light & Heated Rear Glass Warning Light. Mk1 (1) Mk1 (1) (1) Mk2Mk3 - Mk1Mk2Mk3 - (1) (1) (1) Mk1 (1) Mk1 (1) Mk1 & Mk2 (1) Mk3 (1) NON-OverdriveOverdrive (1) (1) OIL PRESSURE GAUGE KITS Rev counter Fuel gauge Rev counter cableGrommet (1) Bulbs Instruments & Cables Instruments Speedometer - MPH (NON-Overdrive) Water temperature gauge Speedometer - MPH (Overdrive) Voltage stabiliser; Grommet Speedometer cable; DESCRIPTION REQ. QTY PART NO. CHM68 RL1570 RL1570 128484 216112 521030 155985 153726 155985 153726 GGE164 GGE165 7H6926 RG1259 RG1264 RG1268 RG1265 RG1274 RG1275 RX1381 RG1195 RG1178 RG1178 RG1265 RG1281 RG1258 RG1259 RG1195 GFS3005 GFS3010 GFS3015 GFS3020 GFS3025 GFS3035 GFU2124 GFU2204 148876A 607201A 142169A (1) (1) (1) (1) (1) (1) (1) (1) (Mk3 only) (All) (Single reverse light) (Twin reverse light) (to KE20000) (from KE20001) (All) (Part of main harness) (For heater lever/control unit 622236) With resistor wire for ignition coil. With ballast resistor for ignition coil. With resistor wire for ignition coil. With ballast resistor for ignition coil. RHD LHD (1) With ballast resistor for ignition coil. from KF20001With resistor wire for ignition coil. (1) LHD (to KE20000)LHD (from KE20001) (1) (1) RHD with Twin reverse light (1) with Single reverse light (1) RHD (1) LHD (1) RHD to KF20000 (1) RHD Mk1 & Mk2Mk35 amp 10 amp (1) 15 amp 20 amp 25 amp 35 amp (1) (A/R) (A/R) (A/R) (A/R) (A/R) (A/R) Gearbox harnessGearlever harness (1) (1) Gearbox harnessGearlever harness (1) (1) High noteLow noteHorn (1) (1) (1) Indicator/flasher unitIndicator/flasher (1) Hazard warningOverdriveRear Lights dimming (1) (1) Mk1 (1) Mk2 - Mk1 - MK3 - MK3 - Mk2 - Voltage stabiliser (Speedo); Fuse box Cover - Fuse box Fuses (pack of 5) Overdrive harness; Headlight, side/flasher harnessNot supplied with full harness, consists of 2 separate leads (1) (RH & LH) that connect to main harness. USA ONLY Main & body harness; Excludes headlight harness. Overdrive harness; Headlight, side/flasher harnessNot supplied with full harness, consists of 2 separate leads (1) (RH & LH) that connect to main harness. Excludes headlight harness. Wiring Harness UK & EUROPEAN Main & body harness; Air horns (pair) (1) Resistor RELAYS & FUSES RELAYS & Relays; Horn; Relays - Fuses & Horns - Fuses Relays DESCRIPTION REQ. QTY PART NO. ELECTRICAL DESCRIPTION QTY REQ. PART NO. DESCRIPTION QTY REQ. PART NO. DESCRIPTION QTY REQ. PART NO. CHASSIS

BONNET HINGE SUPPORT 132754 CHASSIS FRAME SHOCK ABSORBER/ MK1 BODY MOUNTING 133868 BRACKET (RH) 208943 132435 (2) BONNET HINGE SUPPORT (RH) REAR DIFF MOUNTING BRACKET CROSSMEMBER 133869 208935 134295 BONNET HINGE SUPPORT (LH) SHOCK ABSORBER/ 132819 LINK PIVOT BONNET HINGE SUPPORT BRACKET (RH) SHOCK ABSORBER/ SUPPORT (RH) BODY MOUNTING TKC1890 REFER TO SEPARATE BRACKET (LH) FRONT CROSSMEMBER DRAWINGS 219152 (RH) 208934 MOUNTING SHOCK ABSORBER/ 134295 BRACKET (DIFF) LINK PIVOT SUPPORT BRACKET (LH) 305592 ENGINE/SUSPENSION 209398 215747 (LH) BONNET HINGE SUPPORT TURRET (RH) FRONT CHASSIS 215746 (RH) OUTRIGGER (RH) MOUNTING BRACKET MK2 (REAR LOWER WISHBONE) 219153 (LH) MOUNTING BRACKET (DIFF) TKC1890 BRACING (CROSS FRONT CROSSMEMBER MEMBER) (RH) 209399 REFER TO LISTINGS 147788 SH606101 FRONT CHASSIS OUTRIGGER (LH) BONNET HINGE SUPPORT (RH) WP20X 305593 147789 ENGINE/SUSPENSION TURRET (LH) BONNET HINGE SUPPORT (LH) 128356 GHF333 (8) BONNET HINGE SUPPORT GHF105 (8) MK3 129650 TKC1890 TKC1890 FRONT CROSSMEMBER FRONT CROSSMEMBER (ALL MODELS) BRACING (CROSS MEMBER) (RH) 311594 REFER TO LISTINGS BONNET HINGE 123203 (4) SUPPORT (RH) BONNET HINGE SUPPORT (LH) REFER TO SEPARATE DRAWINGS 311595 BONNET HINGE SUPPORT (LH)

Mounting bracket (Rear lower wishbone); CHASSIS PLATE - RL1431 Chassis Frame Right hand (1) 215746 Left hand (1) 215747 ALL MODELS Support bracket (Rear shock absorber); Chassis frame (Reconditioned); Enquire for availability. Right hand (1) 208935 UK specification (1) PKC117R Left hand (1) 208934 Mounting kit (Body to chassis) (1) 574245 Diff mounting bracket (Rear) (1) 132435 Includes mounting pads, bolts, washers & nuts. Mounting bracket (Body & shock absorber); Bonnet hinge support; Right hand (1) 132754 Mk1 - Left hand (1) 132819 Right hand (1) 133868 Rear upper crossmember (1) 208943 Left hand (1) 133869 Chassis/commission plate (1) RL1431 Mk2 - Right hand (1) 147788 Left hand (1) 147789 Mk3 - DOOR GAP ADJUSTING TOOL RX1543 Right hand (1) 311594 BOLTS BETWEEN ‘A’ POST AND ‘B’ POST TO MAINTAIN CORRECT DOOR OPERTURE SIZE WHEN REPLACING SILLS Left hand (1) 311595 OR REPAIRING CHASSIS. Link pivot - Bonnet hinge support; Mk1 models only (2) 134295 Front crossmember (1) TKC1890 Excludes bonnet hinge supports. Bracing - Crossmember; Mk1 & Mk2 - Right hand (1) 209439 Left hand (1) 209440 Mk3 - Right hand (1) 218526 Left hand (1) 218527 Front chassis outrigger; Right hand (1) 209398 Left hand (1) 209399 Mounting turret/bracket (Engine & suspension mounting); Right hand (1) 305592 Left hand (1) 305593 Plate - stiffener (Turret mounting) (4) 123203 Setscrew (Turret mounting) (8) GHF105 Washer - spring (For setscrew GHF105) (8) GHF333 Plate (Drilled & tapped) (Turret mounting) (4) 129650 Shim (Suspension adjusting) (A/R) 128356 Setscrew (Adjustment shim) (2) SH606101 Washer spring (for setscrew SH606101) (2) WP20X Mounting bracket (Rear axle); Right hand (1) 219152 Left hand (1) 219153

38 RL1402 910045 905222 613045 613751 811680 706539 811679 607869 607711 610675 608380 703862 703863 703864 703865 703866 703867 703868 623873 RB7222 GHF1532 XKC3700 XKC3702 XKC3701 610675 MK1 WING 907154 (LH) MK2 WING set) 908113 (LH)

908114 (RH)

(1) (1) (4) (4) (1) (1) (a/r) (a/r) (a/r) (a/r) WING MK2 (1 (Optional fitting); 607663 (2) (Mk1 only) 910045 818625 MK1 & MK2 (Mk1 only) leaf transfer (Engine bay); (Bonnet tube to wheelarch) (Bonnet tube to wheelarch) badge (1) FRONT PANELS & BONNET FRONT PANELS shield badge letter set (Not illustrated) (Not illustrated) (Not illustrated) (Not illustrated) 609931 (2) 607664 (2)

(Bonnet to bulkhead)

613666 Left hand WING MK1 Upper (1) LowerRight handRear - CentreLeft hand (1) (1) (1) (1) Letter ‘R’Letter ‘I’Letter ‘U’Letter ‘M’Letter ‘P’Letter ‘H’ (1) (1) (1) (1) (1) (1) Right hand Letter ‘T’ (1) Black Gold Silver Red MK2 ONLY 911720 (LH) 911721 (RH) FRONT GRILLE MK1 & MK2 - 817252 BRAND NEW! DESCRIPTION REQ. QTY PART NO. Seal Bonnet stay rod; Bonnet Bonnet pivot tube; Bonnet pivot Clamp plate Valance board Valance board ‘Triumph’ ‘Triumph’ Backing plate Backing plate Includes 7 letters & fasteners. ‘GT6 Mk 2’ Badge fasteners‘Triumph Laurel’ (A/R) 905222 706311 903137 WP127 607664 613474 609931 612962 612617 612616 817252 710679 710680 562116 612838 712726 612963 621418 607910 621419 818626 818625 612874 612873 607663 807136 811676 610676 GHF117 GHF321 GHF201 GHF301 607663FK (1) (2) (2) (4) (4) (4) (2) (2) (2) (2) (2) (1) (1) (1pr) 607711 (Locates peg 612962); 613597 706539 909797 39 (Not illustrated) (Tapped) (Bonnet) (For setscrew GHF117) 612874 612873 (For setscrew GHF117) 903090 MK1 ONLY 811679 (Bonnet hinge bracket to body); (Not illustrated) (Black plastic) (Bonnet catch plates) Locking 608380 RL1402 LETTER SET (Bonnet catch) (Not illustrated) (Bonnet catch) (Not (Bonnet locating plate) (Grille lower) (For cone 612962) (Bracket to bonnet tube); (Bonnet locating peg) (For cone 612962) 619740RH* 619739LH* Mk1Mk2Mk1Mk2Mk1Mk2 (2) (2) (2) (2) (2) (2) Right hand (1) Left hand (1) Left hand (1) Right hand (1) Mk1Mk2 (1) (1) Mk1 & Mk2 (2) 613045 613751 817252 607869 Headlamp mounting ring; mounting Headlamp Illustration shows MK1 type bracket. •Not illustrated. Locating cone/peg dash Panels. *For illustration refer to; ‘A’ Post & side Reinforcing plate - Wing Includes all fixings required for both sides. Includes all fixings Bonnet lock in pairs only. Bonnet locks supplied catchPlate - Bonnet plate) Washer (Catch (2) Plate - Bonnet catch Plate - Bonnet Setscrew• Nut Bracket* Channel Support bracket - ChannelFront lower panel/valance; (1) Washer• - Plain Washer• - Washer Plate* Tube/spacer Spacer Front grille Bonnet catch-leverBonnet Fitting kit (2) Seal - Front lower panel/valance to bonnet; Bonnet hinge/pivot bracket; DESCRIPTION REQ. QTY PART NO. 811680 710680 818626 612962 GHF301 GHF201 607910 (2) 621419 (2) 623873 909798 909797 903138 903137 613666 907155 907154 908114 908113 908116 706312 706311 613598 613597 903091 903090 608520 911721 911720 MK2 ONLY 911721R 911720R 612830RH* 612829LH* 903138 909798 (2) (18) (‘Nose’ to wheelarch); 710679 706513RH* 706512LH* 613598 612963 (MK1) (2) 621418 (MK2) (2) MK1 ONLY 907155 (RH) (Grille aperture to wheelarch); 712726 (MK2) (2) 612838 (MK1 ) (2) BONNET HINGE BRACKET - AssemblyAssembly (1) (1) Repair panelRepair panel (1) (1) 706312 903091 Right hand (1) Left handRight handLeft hand (1) (1) (1) Right handLeft handRight handLeft hand (1) (1) (1) (1) Right handLeft handRight hand Left hand (1) (1) MK1 ONLY (Wheel arch - Rear) 610676 (2) (for seal 613666) (Not illustrated) 807136 (MK1) 811676 (MK2) Outer - Inner Mk1 - - Mk2 (with Louvres) Right hand (1) Right hand (1) Left handLeft hand (1) (1) Mk1 - Mk2 - *ITEMS SHOWN ARE NOT ITEMISED IN THE PARTS LISTINGS. FRONT LOWER VALANCE Seal Clip Front wheel arches; MK1 & MK2 MK1 (Mk2)Bonnet assembly to fit. Complete, ready Front wing; (1) Front Panels & Bonnet & Bonnet Panels Front Closing panel ‘Nose’ panel; Strengthener/filler ‘D’ panel DESCRIPTION REQ. QTY PART NO. BODY PARTS DESCRIPTION QTY REQ. PART NO. DESCRIPTION QTY REQ. PART NO. DESCRIPTION QTY REQ. PART NO. BODY PARTS Front Panels & Bonnet BONNET ASSEMBLY GT6 MK3 - 913766. Mk3 BONNET - WINGS & ARCHES Bonnet assembly (1) 913766 Front wing - Mk3; Right hand (1) 909664 Left hand (1) 909663 Front wheel arches; Inner - Right hand (1) 909798 Left hand (1) 909797 Outer - Right hand (1) 909352 Left hand (1) 909351 Seal - wheel arch (rear) (2) 613666 Clip - for seal above (18) 608520 Stiffener panel (Bonnet - front) (1) 815010 Headlamp mounting panel; Assembly - Right hand (1) 818872 Left hand (1) 818871 Repair panel - Base only - Right hand (1) 818872B Left hand (1) 818871B Reinforcing plate - Wing side (Locates peg 612962); Right hand (1) 818626 Left hand (1) 818625 Bonnet pivot tube; Right hand (1) 911108 Rear - Centre (1) 911150 Bracket* (Bonnet locating plate) (2) 612616 ‘Triumph Laurel’ leaf transfer (Optional fitting); Left hand (1) 911107 *For illustration refer to; ‘A’ Post & dash Panels. Black (Not illustrated) (a/r) XKC3700 Bush (Bonnet tube to hinge) (2) 624509 Locating cone/peg (Bonnet) (2) 612962 Gold (Not illustrated) (a/r) XKC3702 ‘GT6 Mk 3’ badge (1) 624737 Nut (For cone 612962) (2) GHF201 Silver (Not illustrated) (a/r) XKC3701 Fasteners (Badge) (2) GHF1532 Washer (For cone 612962) (2) GHF301 Red (Not illustrated) (a/r) RB7222 Blue ‘BL’ badge (Stick-on)) (2) 725525 Plate* (Bonnet locating peg) (2) 612617

FRONT PANELS & BONNET BONNET ASSEMBLY MK3 913766

818872 624737

GHF301 (2) GHF201 (2) 612962 (2) GHF1532 (2) 909664 911150 818626 818625

815010

818871

909798

909352

911108

624509 (2) 909351 909663 725525 (2) 911107 909797

40 MK3 910045 815391 WM58 A/R* GHF200 (2) GHF331 (2) GHF300 (2) GHF332 A/R* GHF201 A/R* 716200 (2) SH605051A/R* 632030 (2) 632020 (2) TN3209 (2) 153227 (2) 607869 624419 BONNET HINGES - HINGES BONNET GHF302 (8) FITTINGS & CATCH - & CATCH FITTINGS SH605051A/R* HU915P (2) 715863 FRONT LOWER VALANCE 715889 GHF332 A/R* WM58 A/R* 613751 613045 624590 624593 609931 (2) DESCRIPTION REQ. QTY PART NO. GHF331 (10) 613666 (2) 607664 (2) GHF300 (2) 911101 (LH) 905222 911102 (RH) 624591 608520 (18) GHF331 (2) SH604051 (2) SH604051 (10) 613474 (2) GHF331 715805 607663 (2) 624590 624509 610675 MK3 815026 GHF300 (2) GHF332 A/R* 607711 (4) SH605051A/R* WC701121 (4) GHF332 (4) 624419 SH604031 (4) WP5 (3) 41 512598 (3) 624593 WM58 (4) WL205 (3) 607869 FRONT LOWER FRONT LOWER SH605051 624509 815392 715805 SH604051 (2) VALANCE & GRILLE - VALANCE GHF300 (10) *ITEMS SHOWN ARE NOT ITEMISED IN THE PARTS LISTINGS. 715864 WM58 A/R* GHF201 A/R* GHF331 (2) DESCRIPTION REQ. QTY PART NO. WP5 WM58 WL205 WP127 GLZ608 RL1383 715864 715863 624419 624590 624593 624591 815026 716200 512598 613045 613751 624509 613666 608520 607869 607711 610675 632020 632030 715889 715805 613474 609931 911102 911101 607663 607664 905222 910045 153227 815392 815391 562116 TN3209 GHF331 GHF300 GHF331 GHF300 GHF321 GHF200 GHF331 GHF300 GHF331 GHF332 GHF302 GHF117 HU915P GLZ608FG GLZ608FK 715889FG 815392FG 815391FG 607663FK SH604051 SH604051 SH604031 SH605051 WC701121 (3) (4) (2) (2) (2) (2) (4) (4) (1) (2) (1) (1) (4) (2) (2) (2) (4) (4) (4) (4) (4) (4) (2) (2) (8) (1) (2) (2) (4) (4) (18) (1pr) (Tapped) (For setscrew GHF117) (For nut GHF200) (For setscrew GHF117) (For setscrew SH605051) (For setscrew SH604031) (Engine bay); (For strip 632030) (For setscrew SH605051) (For setscrew HU915) (For nut GHF200) (For setscrew SH604031) (Bonnet tube to wheelarch) (Bonnet pivot) (For setscrew HU915) (Bonnet tube to wheelarch) (Not illustrated) (Bonnet catch plates) (Bonnet catch) (Not illustrated) (Bonnet catch) (Not (Centre valance & grille) (Bonnet pivot) (Headlamp mounting panel) (Hinge bracket to body) (1/4 valance) (Per side) Spring plate - Spring - Locking• (Bonnet catch plate) (Not illustrated) (Bonnet catch plate) (Grille centre) SteelFibreglassSteelFibreglass (1) (1) (1) (1) (Valance to bonnet) (Bonnet to bulkhead) (Wheel arch rear) (Locates seal 613666) (Headlamp cowl) Right handLeft hand (1) (1) Valance - OuterValance & grilleGrille - OuterGrille - Centre (2) (2) (2) (1) UpperLower (1) (1) Right handLeft hand (1) (1) Right handLeft hand (1) (1) Steel Fibreglass Original - PlasticOriginal - FibreglassRight hand (1) (1) Left hand Screw SetscrewWasher - SpringWasher - PlainFront grilleOuter grille section; (10) (10) (10) (1) Mounting brackets; Washer - SpringWasher - FlatSetscrew Washer - SpringWasher - PlainValance board (3) (3) (4) (4) Seal Setscrew Clip Clamp plate Backing Bonnet stay rod; Protector stripRetaining clip (2) Washer - Spring Washer - Flat Setscrew Washer Washer - Flat Bonnet hinge/pivot bracketSetscrew Washer - (2) Washer - Flat Tube/spacer Nut - Spring Front spoiler; Plate - Bonnet catch Plate - Bonnet Setscrew• Washer - Plain• Washer Washer - Flat Mk3 only, wiring harness to valance boards. Includes 1 of each brackets (624419 & 624590), and all necessary fixings. Seal (Fitted from KE20000 - NOT illustrated) Mk3 FRONT LOWER VALANCE & GRILLE Front lower valance Nut Headlamp cowl; Not Illustrated. Bonnet lock in pairs only. Bonnet locks supplied catchPlate - Bonnet Washer (2) BONNET HINGE & PIVOT - & PIVOT HINGE BONNET & CATCH FITTINGS Bonnet catch-leverFitting kit required for both sides. Includes all fixings (2) Mk3 Clip (2) Fitting kit for aboveFront 1/4 valance; (1) Fitting kit Seal DESCRIPTION REQ. QTY PART NO. BODY PARTS DESCRIPTION QTY REQ. PART NO. DESCRIPTION QTY REQ. PART NO. DESCRIPTION QTY REQ. PART NO. BODY PARTS Windscreen & Fittings WINDSCREEN/ Mk1 & Mk2 models See also; ‘A’ Post & Dash Panels. FRAME & FITTINGS Mk1 & Mk2 MK1 & MK2 Windscreen - Laminated; 913442 613954 Clear (1) 906707C Tinted (1) 906707T SE605201* (2) Windscreen seal/rubber (1) 913442 619882* (2) 619884* (2) Finisher (Fits in seal 913442) (1) 613954 Clip - Finisher (1) 611437 806144 Seal (Windscreen frame to body); 906707TD 611437 Upper (Frame to roof panel) (1) 806144 906707CL GHF332* (4) Lower (Frame to body) (1) 650130 GHF201* (2) Outer trim/finishers; Right hand (1) 620201 650130 Left hand (1) 620191 620201 Lower trim/finisher (1) 708759 SH605071* (3) Mk3 WM58* (3) Windscreen - Laminated; 708759 Clear (1) 917668 WM58* (3) Tinted (1) 917669 GHF332* (3) 620191 Windscreen seal/rubber (1) 909029 GHF201* (3) GHF314* (2) *ITEMS SHOWN ARE NOT GHF331* (2) Finisher (Fits in seal 909029); ITEMISED IN THE PARTS Right hand (1) 917249 LISTINGS. GHF101* (2) Left hand (1) 917248 Clip - Finisher (2) ZKC2099 Gutter (Drip channel); WINDSCREEN/ 909029 Right hand (1) 624711 FRAME & FITTINGS 917668 Left hand (1) 624701 917669 Trim/cover (Black); MK3 Right hand (1) 624851 Left hand (1) 624841 ZKC2099

917248

624851 ZKC2099 624841 624701 917249 624711

42 OYPARTS BODY DESCRIPTION QTY REQ. PART NO. DESCRIPTION QTY REQ. PART NO. DESCRIPTION QTY REQ. PART NO.

RL1475 ‘A’ POST & DASH PANELS REPAIR PANEL M/CYL MOUNTING ILLUSTRATION SHOWS MK1/MK2 DASH TOP/SCUTTLE.

GHF301 GHF201 612962 (BONNET LOCATING CONE) DASH SUPPORT BRACKET REFER TO LISTINGS

613687 REPAIR PANEL FOR ‘B’ POST & REAR 912980UP WINGS SEE; REAR WING & ‘B’ POST (OUTER) 806707 CS4012

613686 REPAIR PANEL 912979UP

612617

613025 REPAIR PANEL 912980LW 612970 706289 612616 706288

FOR OUTER & INNER SILLS REFER TO; REPAIR PANEL FLOOR PANELS & SILLS 912979LW

‘A’ Post & Dash Panels DOOR SHELL See also; Floor Panels & Sills. ALL MODELS ‘A’ post repair panels; Right hand - Upper (includes captive plates) (1) 912980UP Lower (1) 912980LW Left hand - DOOR MIRRORS - BLACK OR CHROME Upper (includes captive plates) (1) 912979UP Lower (1) 912979LW DOOR SHELL Filler panel (‘A’ post lower); MK1/MK2 Door Mirrors Right hand (1) 706289 908026 RH 908025 LH Door mirror; Left hand (1) 706288 Chrome Master cylinder mounting DOOR SHELL MK3 Right hand (Complete) (1) GAM213 repair panel (1) RL1475 915362 RH Left hand (Complete) (1) GAM214 Dash support bracket 915361 LH Black Right hand Right hand (Complete) (1) GAM261 RHD (1) 621707 Door Shell Left hand (Complete) (1) GAM262 LHD (1) 613685 ‘Bullet’ door mirror (Complete) Rh & Lh (2) GAM105 Door shell; Left hand Mk1 & Mk2 RHD (1) 612981 LHD (1) 621706 Right hand (1) 908026 Left hand (1) 908025 Support gusset (battery box /bulkhead) Right hand (1) 613687 Mk3 Left hand (1) 613686 Right hand (1) 915362 Left hand (1) 915361 Locating cone/peg (Bonnet) (2) 612962 (Not illustrated); Nut (For cone 612962) (2) GHF201 Door skin only Washer (For cone 612962) (2) GHF301 Mk1 & Mk2 Plate (Bonnet locating peg) (2) 612617 Right hand (1) RL1369 Bracket (Bonnet locating plate) (2) 612616 Left hand (1) RL1368 Battery box (1) 806707 Mk3 Mat - rubber (Battery seating) (1) 613155 Right hand (1) RL1129 Drain hose (1) 612970 Left hand (1) RL1128 BULLET STYLE Hose clip (1) CS4012 Door bottom (Repair panel) (Not illustrated); DOOR MIRRORS GAM105 Grommet (Drain hose) (1) 613025 All models Right hand (1) RL1253 Left hand (1) RL1252 Sound deadening pad (a/r) RB7145 Self adhesive (21”x8”). Fits on inside of door skin, use as required. Door gap adjusting tool (1) RX1543

43 BODY PARTS 710195 710194 619242* RX3002 DOOR SEAL (SURROUND) 573081* (2) 574111* RH 574110* LH 710650 (2) 620656 (2) 710651 (2) 608542* 570220* (2) (SEE LISTINGS) DROP GLASS 574064 574063 820855 820854 SEE INTERIOR TRIM. 630755 574106* RH 574105* LH FOR DOOR TRIM PANELS - 574117* RH 574116* LH 619244* 619242* 574109* (2) 574112* (2) 574113* (2) 574114* (2) 574115* (2) GHF200* (2) DESCRIPTION REQ. QTY PART NO. 608542* (2) 612806 (2) 612792 (2) 574099 574098 613024 (4) 613239 (2) 607824 (4) 610042 (4) GHF1582 (8) 609143 (2) 574103* LH 574104* RH GHF332 (12) 613169 (14) 44 SH605071 (12) ASSEMBLY (SEE LISTINGS) GHF332 (4) QUARTERLIGHT. QUARTERLIGHT 617164 (2) 713035 (2) 574093 574092 602821(2) 574090* LH 574094* LH 574091* RH 574095* RH *ITEMS SHOWN ARE NOT ITEMISED IN THE PARTS LISTINGS. DOOR GLASS & FITTINGS, GLASS DOOR CHECKSTRAPS & HINGES, & HINGES, CHECKSTRAPS DOOR SEALS 607823 (4) SF605061 (8) ILLUSTRATION SHOWS MK3 DOOR TRIM & FITTINGS (ALL MODELS) GHF332 (8) SH605071 (8) DESCRIPTION REQ. QTY PART NO. 613024 574064 574063 820855 820854 574099 574098 609143 810313 810312 820851 820850 574093 574092 620656 630755 607824 607823 810042 810041 825046 825045 612792 610042 613239 602821 713035 617164 710195 710194 710650 710651 613169 612806 GHF332 RX3002 GHF1582 SF605061 SH605071 SH605071 (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) (4) (8) (4) (2) (2) (8) (2) (1) (1) (12) (14) (Hinge to body) (Drop glass guide); (Lift channel) (Check strap) (Hinge to door) (Hinge to door) (Hinge to body) Left hand Right hand Left hand Right hand Left hand Right hand Left hand Right hand Right hand Left hand Right hand Left hand (Check strap to body) (Outer waist seal) (Inner waist seal)

Right hand Tinted - Left hand Right hand Clear - All colours (2) Tinted glass - Left hand Clear glass - Clear - Tinted - Right hand Left hand Rear (2) Front (2)

Washer - SpringDoor check strapRivet (24) (2) Rubber seal - Quarterlight glass; Cover - Top channel (2) Pivot - Quarterlight top (Outer); Quarterlight glass only; Sill weatherseal‘A’ post weatherseal (2) (2) Colours available: Black, Beige, Blue,-Grey, Shadow Blue, Chestnut, Red & Tan. Seal - Door surround (Rubber/bristle); Door Aperture Seals Door Aperture

Quarterlight assembly; Quarterlight Door hinge assembly (4) & Hinges Hinge pin onlyWasher/gasket (4) Door Checkstrap Door Checkstrap Clip Outer waist seal (Top)Outer waist Requires slight trimming to fit. (2) Door Glass & Fittings Glass Door Drop glass; Setscrew Rubber seal Setscrew Setscrew Lift channel - Drop glassRubber Seat Guide - Drop glass (Rear); (2) Channel Felt Inner waist seal (Top)Clip (2) DESCRIPTION REQ. QTY PART NO. 364480 621811 623843 603382 600832 628012 819802 819801 810401 810400 819804 819803 716011 624634 GHF331 GHF331 MK3 SH604041 SH604041 AD610042 WC701121 WC701121 628012 AD610042 (2) (6) (2) (2) (6) (6) (6) (6) (6) WC701121 (8) GHF331 (8) SH604041 (8) 810401 810400 SH604041 (6) GHF331 (6) WC701121 819804 819803 DOOR LOCKS & LOCKS DOOR HANDLES - HANDLES SEE INTERIOR TRIM. (Door handle); FOR DOOR TRIM PANELS - 630629* (2) SEALS 621811 (For setscrew SH604041) (For setscrew SH604041) (For setscrew SH604041) SEE PAGE 44 (For setscrew SH604041) 819802 819801 DOOR APERTURE (Interior/lever handle) (Window regulator) (Rod to handle) 364480 (4) 624634 819809 Right handLeft hand (1) (1) Right hand (1) Left hand (1) Left hand (1) Right hand (1) 600832 DESCRIPTION REQ. QTY PART NO. Clip - ‘Anti-rattle’ (4) Bush/clip Escutcheon (behind handle)Conical springPin - handle retaining (2) (2) (2) Washer - Plain Bezel/escutcheon Interior door handle assembly; Setscrew Washer - Spring WINDOW REGULATOR (ALL MODELS) Window regulator; Washer - Spring Washer - Plain Window winder handle Setscrew Screw (Bezel)Moulding - Door pullPlate - Door pull (2) (2) (2) 819808 819807 630079 (2) 716011 621672* RH 621671* LH GHF1180 (4) 623843 ZKC37 ZKC38 ZKC36 630079 819809 819808 819807 915634 915633 914696 914695 576469 BHH341 CZA3310 CZA3311 GHF1180 577473A 915633/4 FQ3405/4 619266* LH 619266* 619267* RH 619267* (2) (2) (4) TN3205* 914696 914695 (1pr) 603882 WP5* ZKC36 (6) ZKC38 (4) 45 ZKC37 (2) (NOT Illustrated) (ALL MODELS) (NOT Illustrated) CZA3310 CZA3311 (Sticker plate to body) (Control rods to lock) Right handLeft hand (1) (1) BHH341 (2) 915634 915633 FQ3405/4 Lock/unlock (2) Latch release - Right handLeft hand (1) (1) Right hand onlyLeft hand only (1) Left hand (1) (1) Rh & Lh (Pair) (1pr) Right hand (1) & FITTINGS WINDOW WINDER HANDLE ILLUSTRATION SHOWS MK3 DOOR TRIM & FITTINGS DESCRIPTION REQ. QTY PART NO. Shim/washer Lock barrel & keys ScrewAdjusting pin (2) (2) ScrewCaptive nut/clip (2) (4) Link/control rods; Clip/retainer Mk3 Door handle assembly - Chrome (Outer); Can be painted black if required. Striker plate; Gasket - Door handle Screw (6) Lock (Rear of door - Outer); 923335 923334 ZKC36 ZKC37 ZKC38 GLZ118 810292 810291 923335 923334 600832 603382 618343 618342 608703 608454 621770 712837 617402 617403 631773 650261 623843 GHF300 617403 (2) 617403 BHH341 CZA3310 CZA3311 631773DL 712837FK 631773NF (2) (2) (4) (2) (2) (2) (2) (2) (1pr) 617402 (2) ZKC36 (6) GHF300 (2) ; - - 608703 (2) ZKC38 (4) (clip fix) CZA3310 CZA3311 (Not Illustrated) (Not Illustrated) (Escutcheon) (Mk1 late & Mk2) ZKC37 (2) (Interior door handle) (Includes barrels & keys); (Interior) (For clip 608703) (Handle to door); (For shim/washer 621714) (For shim/washer 621714) Right handLeft handRight handLeft hand (1) (1) (1) (1) Right handLeft handRight hand (1) (1) (1) Left hand (1) 712837 (2) 712837 (Remote control link to lock) BHH341 (Handle retaining) Mk1 (Late) & Mk2 - Mk1 (Early) Mk1 (Late) & Mk2- Mk1Mk2 (2) (2) Mk1 (Early) Standard type For improved security. Barrel type keys. Large (2) SmallNut fix type (2) (1pr) Dead lock type (1pr) Mk2 (2) Mk1 (2) 631773 DOOR LOCKS Mk1 & Mk2 & HANDLES - *ITEMS SHOWN ARE NOT ITEMISED IN THE PARTS LISTINGS. ScrewClip (6) Escutcheon Door pull Screw Washer Striker plate; Shim/washer Pin The following Mk1 & Mk2 parts are not illustrated. Interior door lever/handle; Sticker plate to body. Screw Lock (Rear of door - Outer); Fitting kit for aboveGasket (2) Mk1 & Mk2 Door handle (Outer) (2) Door Locks & Handles Door lock Conical Spring DESCRIPTION REQ. QTY PART NO. BODY PARTS DESCRIPTION QTY REQ. PART NO. DESCRIPTION QTY REQ. PART NO. DESCRIPTION QTY REQ. PART NO. BODY PARTS Floor Panels & Sills 709862FG GHF712 FRONT FLOOR PANELS - ALL MODELS SILLS & GEARBOX COVER Floor pan repair section; Right hand (1) 908900RH RH5091 Left hand (1) 908900LH Crossmember repair section (2) 908900XM Dash mounting bracket - Lower; Right hand (1) 612528 807104 Left hand (1) 612527 Heelboard (1) 903134 903134 Crossmember (Heelboard) (1) 807104 Heelboard to rear seat deck panel. RH5091 Bracket; Radius arm mounting (2) 623796 YH6507 (8) 624406 Handbrake lever mounting (1) 624406 608383 (8) Inner sill; Right hand (1) 806639 WP5 (8) Left hand (1) 806638 GHF712 (8) Strengthener; Right hand (1) 806635 Left hand (1) 806634 Reinforcement plate seat belt anchor - pair (1) 621112 623796 (2) Full outer sill; CROSSMEMBER Original - REPAIR SECTION Right hand (1) 903098 908900XM Left hand (1) 903097 Reproduction - RIGHT HAND FLOOR Right hand (1) 903098P REPAIR SECTION Left hand (1) 903097P 908900RH Filler panel - Sill; Right hand (1) 706423 621112 612528RH Left hand (1) 706422 612527LH Gearbox cover Fibreglass (1) 709862FG Plastic (1) 709862PL 806635 Seal kit - tunnel cover (1) RH5091 LEFT HAND FLOOR 806634 Fitting kit - tunnel cover (1) 709862FK REPAIR SECTION INNER SILL Inc. items listed below. 908900LH 806639 Screw - Self tapping (8) YH6507 806638 706423 OUTER SILL Plate (8) 608383 706422 903098 Washer (8) WP5 903097 Spire clip (8) GHF712 Rear Inner Wing & Inner Arches Mk3 ALL MODELS Mk1 & Mk2 Outer arch repair section; Inner wheel arch (Inside luggage area); Outer arch repair section; Part of arch from Inner to Outer wing. Right hand (1) 725564 Part of arch from Inner to Outer wing. Right hand (1) RL1241 Right hand (1) RL1477 Left hand (1) 725563 Left hand (1) RL1478 Left hand (1) RL1240 Bracket - Damper mounting; Inner wing - Rear half repair section; Inner wing - Rear half repair section; Rotoflex models only. Right hand (1) RL1484 Right hand (1) RL1454 Right hand (1) 714656 Left hand (1) RL1483 Left hand (1) RL1453 Left hand (1) 714655 Inner wing - Rear lower 1/4 repair section; Inner wing - Rear lower 1/4 repair section; Inner ‘B’ post lower repair section; Right hand (1) RL1485 Right hand (1) RL1336 Right hand (1) 715886Rep Left hand (1) RL1486 Left hand (1) RL1337 Left hand (1) 715885Rep

MK1 & MK2 INNER WING REAR HALF INNER WING REPAIR SECTION REAR INNER WING RL1484 RH & INNER ARCHES REAR LOWER VALANCE RL1483 LH SEE: BOOT FLOOR & REAR VALANCE PANELS SECTION

OUTER WHEEL ARCH INNER WING REAR LOWER 1/4 REPAIR SECTION BOOT FLOOR PAN REPAIR SECTION SEE: BOOT FLOOR RL1477 RH RL1485 RH & REAR VALANCE RL1478 LH RL1486 LH PANELS SECTION

MK3 INNER WING INNER WING REAR HALF REPAIR SECTION REAR DECK SEAT PAN RL1454 RH SEE: BOOT FLOOR & REAR RL1453 LH VALANCE PANELS SECTION OUTER WHEEL ARCH INNER WHEEL ARCH REPAIR SECTION INNER WING REAR DAMPER MOUNTING LOWER 1/4 REPAIR SECTION 725564 RH BRACKETS RL1241 RH 725563 LH RL1240 LH RL1336 RH 714656 RL1337 LH ALL MODELS 714655 ALL MODELS WITH ROTOFLEX INNER B POST LOWER REPAIR SECTION 715886REP RH 715885REP LH ALL MODELS 46 BODY PARTS DESCRIPTION QTY REQ. PART NO. DESCRIPTION QTY REQ. PART NO. DESCRIPTION QTY REQ. PART NO. Rear Wing & ‘B’ Post REAR WING & REPAIR SECTIONS (Outer) Mk1 & Mk2 Mk1 & Mk2 WING REPAIR Mk1 & Mk2 SECTIONS Rear wing; Right hand (1) 576409 Left hand (1) 576408 Finisher - Wing lower (2) 706600 Rear wing repair sections; Front lower section - Right hand (1) RL1264 RL1391 (RH) Left hand (1) RL1263 RL1392 (LH) Wheel arch (Outer) - RL1481 (RH) Right hand (1) RL1481 RL1480 (LH) Left hand (1) RL1480 Rear lower section - Right hand (1) RL1391 Mk1 & Mk 2 Left hand (1) RL1392 WING 706600 (2) RL1264 (RH) ‘B’ post assembly; 576409 (RH) RL1263 (LH) Right hand (1) 813366 576408 (LH) Left hand (1) 813365 Mk3 Rear wing - Original; REAR WING & REPAIR SECTIONS Mk3 WING REPAIR Right hand (1) WKC2467 Mk3 SECTIONS Left hand• (1) WKC2466 •Requires modification for fuel filler aperture. Rear wing - Remanufactured; Right hand (1) WKC2467P Left hand• (1) WKC2466P •Requires modification for fuel filler aperture. Finisher - Wing lower (2) 715821 RL1283 (RH) Rear wing repair sections; RL1282 (LH) Front lower section - RL1239 (RH) Right hand (1) RL1264 RL1238 (LH) Left hand (1) RL1263 Wheel arch (Outer) - RL1264 (RH) Right hand (1) RL1239 RL1263 (LH) Left hand (1) RL1238 715821 (2) Rear lower section - Right hand (1) RL1283 Mk3 WING ‘B’ POST Left hand (1) RL1282 ORIGINAL REMANUFACTURED WKC2467 (RH) WKC2467P (RH) ASSEMBLY ‘B’ post assembly - WKC2466 (LH) WKC2466P (LH) ALL MODELS Right hand (1) 813366 Left hand (1) 813365 813366 (RH) BOOT FLOOR & REAR VALANCE 813365 (LH) ILLUSTRATION SHOWS MK3 PANELS MOUNTING BRACKET TAILGATE LOCK REAR LAMP PANEL (MK3) (NOT AVAILABLE) 815395

Boot Floor & Rear (Outer) 627196 (MK3) Valance Panels ALL MODELS Boot floor (1 piece section) (1) 815279 Cut hole for fuel tank. Boot floor repair panels; Right hand (NOT illustrated) (1) 815279Rh Left hand (NOT illustrated) (1) 815279Lh Rear lower outer valance; Mk1 & Mk2 (1) 719030 Alternative parts, no lamp holes, modify to suit. Mk3 (Illustrated) (1) 908970 Rear lamp panel (Mk3 only) (1) 815395 Sound deadening pad (Not Illustrated) (a/r) RB7145 REAR LOWER VALANCE Self adhesive (21"x8"). Fit on inside of boot area, use as required. 719030 (MK1 & MK2) Spare wheel retaining; 908970 (MK3) (ILLUSTRATED) Mk1 & Mk2 (Not Illustrated) - Hook/bolt (Upper) (1) 650017 REAR DECK SEAT PAN BOOT FLOOR PAN (MK3) Hook/bolt (Lower) (1) 618515 FRONT REPAIR SECTION 815279 Clamping disc (1) 650016 REPAIR SECTIONS ALSO AVAILABLE 903132F Mk3 - Bracket - Spare wheel (1) 627196 Rear deck/seat pan front repair section (1) 903132F 47 DESCRIPTION QTY REQ. PART NO. DESCRIPTION QTY REQ. PART NO. DESCRIPTION QTY REQ. PART NO. BODY PARTS Roof Panel ROOF PANELS Repair section - Roof front (1) 909765RP Finisher - Roof panel to windscreen (1) 814628

814628 ROOF REPAIR SECTION - FRONT 909765RP

TAILGATE/GLASS & FITTINGS 611437 574062* Tailgate/Glass & Fittings 613955 574061* Tailgate shell (1) 809405 Weatherseal (Tailgate to body) (1) 610657 904487 Glass (Heated); GHF332* GHF201* Clear (1) 722661 722661 Tinted (1) 722843 722843 Weatherseal (Glass to Tailgate) (1) 904487 Finisher (1) 613955 Clip - Finisher (1) 611437 625609 Hinge assembly; GHF101* (4) 625608 Mk1 (to KC50000) 809405 Right hand (1) 709301 722676 Left hand (1) 709300 WK7605* WC701121* 600949 Mk2 (KC50001 on) & Mk3 Right hand (1) 625609 619384 610657 GHF200* Left hand (1) 625608 WL205* KX4505* Turnbutton/lock & keys (Mk3) (1) 722676 GHF331* WP5* GHF101* (6) Gasket (Turnbutton to tailgate) (Mk3) (1) 600949 GHF200* WS702001* Lock/catch (Tailgate) (1) 710290 576156* Striker block (1) 619383 Striker plate guide (1) 619384 PX505 Handle assembly (Mk1 & Mk2) (1) 710497 Not Illustrated 710290 Rear Quarterlight *ITEMS SHOWN ARE NOT 619383 ITEMISED IN THE PARTS Not illustrated. CX2508* LISTINGS. Quarterlight frame & glass Mk1 & Mk2 Right hand (1) 574121 FRONT SPOILER (MK3 ONLY) GLZ608 (FITTING KIT GLZ608FK) Left hand (1) 574120 Mk3 Clear glass Right hand (1) 814750 Left hand (1) 814749 Mk3 Tinted glass Right hand (1) 821058 Left hand (1) 821057 Quarterlight rubber seal (2) RX3007 Rubber/furflex. Replacement type aperture seal supplied in a variety of colours (subject to availability). See price guide. Quarterlight handle Mk1 & Mk2 Right hand (1) 574131 SILL KICK PLATES Left hand (1) 574130 (TRIUMPH LOGO) PAIR - RL1067 Mk3 Right hand (1) 624372 Left hand (1) 624371

OVERSILL TRIM KIT (ALL MODELS) - RL1232 KIT INCLUDES PAIR OF STAINLESS STEEL SILL COVERS AND RETAINING STRIPS.

48 DESCRIPTION QTY REQ. PART NO. DESCRIPTION QTY REQ. PART NO. DESCRIPTION QTY REQ. PART NO. XEIRTI BADGES & TRIM EXTERIOR Body Mouldings/ GHF1532 BODY MOULDINGS/TRIM & BADGES Trim & Badges 619860 710086 (2) Mk1 710686 Wing finisher (Chrome); Front wing (2) 710086 Mk1 GT6 Rear wing - Right hand (1) 710687 Left hand (1) 710686 Fasteners (Wing finishers) (40) 614107 ‘Triumph’ letter set (2) RL1402 710687 For Tailgate & Bonnet. Each set includes 7 letters & fasteners. Letter ‘T’ (2) 703862 Letter ‘R’ (2) 703863 Letter ‘I’ (2) 703864 RL1402 Letter ‘U’ (2) 703865 Letter ‘M’ (2) 703866 614107 Letter ‘P’ (2) 703867 Letter ‘H’ (2) 703868 ‘GT6’ Tailgate badge (1) 619860 Fasteners (Letters/badges) (a/r) GHF1532 GHF1532 The following parts are not illustrated - See Mk2 and/or 623873 Mk3 drawings. ‘Triumph’ bonnet badge (1) 608380 623872 Sill finisher - Lower (Chrome); 706556 Right hand (1) 712986 Left hand (1) 712985 Mk2 GT6 Fasteners (For lower sill finisher) (16) 621771 712986 (RH) MK2 712985 (LH) Wing finisher (Chrome); 707319 Front wing (2) 706556 Rear wing (2) 707319 622260 Fasteners (Wing finishers); Front wing finisher (32) 613766 Front wing finisher (Rear) (4) 613886 613766 Rear wing finisher (32) 613766 GHF1532 613886 Rear wing finisher (Rear) (4) 613886 613886 613766 ‘GT6 Mk 2’ Bonnet badge (1) 623873 621771 ‘Triumph’ Rear panel badge (1) 622260 ‘GT6 Mk 2’ Rear panel badge (1) 623872 613766 (18) Fasteners (Badges) (a/r) GHF1532 613886 (4) Sill finisher - Lower (Chrome); 715693SS (2) Right hand (1) 712986 Mk3 GT6 Left hand (1) 712985 Fasteners (For lower sill finishers) (16) 621771 Mk3 Rear wing finisher 624738 GHF1532 Stainless steel (2) 715693SS Black (2) 715693B 715695 Fasteners (Wing finishers); Rear finisher (18) 613766 575937 (6) Rear finisher (Rear) (4) 613886 815023 RL1067 (2) ‘GT6 Mk 3’ Rear panel badge (1) 624738 Fasteners (Badges) (a/r) GHF1532 Sill finisher - Lower (Chrome); 715697 Right hand (1) 712986 GHF1154 (14) 621771 (16) Left hand (1) 712985 815024 712986 Fasteners (For lower sill finishers) (16) 621771 613886 (8) 712985 Tread/kick plate (Sill top) - with ‘Triumph’ logo (1pr) RL1067 Screw (Treadplate) (6) 575937 Rear finishers; Upper (1) 715695 Lower (1) 715697 ‘Horseshoe’- Right hand (1) 815024 Left hand (1) 815023 Fasteners (For rear finishers); for Upper/lower finishers (14) GHF1154 for ‘Horseshoes’ (8) 613886

The following parts are not illustrated. ‘Triumph Laurel’ leaf transfer (Optional fitting); ‘GT6 Mk 3’ Bonnet badge (1) 624737 Large - 200mm dia ‘BL’ blue badge (Front wing side) (2) 725525 Black (a/r) XKC3700 Fasteners (Badges) (a/r) GHF1532 Gold (a/r) XKC3702 ‘Triumph’ badge complete (1) 626859 Silver (a/r) XKC3701 All UK models & USA to KF20000. See illustration in ELECTRICAL section. Red (a/r) RB7222 Fitted to number plate lamp. Small - 50mm dia Union Jack badge Retaining clip (3) FR1202 Black (a/r) RB7178B For badge 626859 to chrome cover. Enamel (30mm x 50mm) (a/r) RX1299 Gold (a/r) RB7178G ‘Triumph’ badge insert only (1) 626859S Stick-on type (a/r) RX1299S Silver (a/r) RB7178S Self adhesive. TSOA Grille badge (a/r) HMP121001 49 DESCRIPTION QTY REQ. PART NO. DESCRIPTION QTY REQ. PART NO. DESCRIPTION QTY REQ. PART NO. BUMPERS Bumpers & Fittings BUMPERS & FITTING (Front & Rear) FRONT & REAR 706583 608491 706584 608491 608491 Mk1 615825* Front bumper bar (1) 806956 608491 Chrome bolt (2) 725804 GHF105 600396 610152* Overider; 710706* 806901 WM58* Right hand (1) 706606 615813* GHF332* (6) Left hand (1) 706605 GHF333* (2) GHF120 GHF332* (2) Seating strip (Overider to bumper) (4) 608491 BH605321 PWZ206* (2) 517263* (3) 615825* GHF105 (2) Bolt (Overiders & bumper to bracket) (2) BH605181 BH605181 (2) 618410* Setscrew (Bracket to chassis) (4) SH605071 GHF332* (2) Spacer (2) 607085 WM58* (2) GHF333* (4) SH605071 (4) WM59* Fitting kit - Front bumper (1) RG1256 511475* (2) 806900 Includes ALL necessary bolts, nuts & washers. GHF332* (2) 607085 WP129* (2) BH605201 (2) Rear 1/4 bumper; FRONT BUMPER GHF316* (2) Right hand (1) 806901 806956 Left hand (1) 806900 GHF333* (2) Overider; 608491 710705* GHF202* (2) Right hand (1) 706584 Left hand (1) 706583 706606 607085 Seating strip (Overider to bumper) (4) 608491 608491 608491 Grommet (2) 600396 706605 Bolt; 608491 725804 (2) Overider to upper bracket (2) BH605321 Overider to lower bracket (2) BH605201 Setscrew; Mk1 GT6 Upper bracket to body (4) GHF105 Rear bumper to body (2) GHF120 B (2) *ITEMS SHOWN ARE NOT ITEMISED IN THE PARTS LISTINGS. C (2) Lower Rh bracket to body (2) GHF105 A (2) Fitting kit - both rear 1/4 bumpers (1) RG1257 D (2) GHF105 (4) Includes ALL necessary bolts, nuts, washers & grommets for 2 bumpers. GHF103 (2) 621252 C (2) 811477 Mk2 SH606141 (2) F (2) GEX7330 Front bumper bar (1) 811660 712564 C (4) Overider; A (2) C (4) D (2) 811476 Right hand (1) 712706 D (2) E (2) D (4) GHF120 (2) C (2) Left hand (1) 712705 GHF105 (8) GEX7330 Rubber - Overider face (2) 709753 C (8) 712566 GHF105 (4) GEX7330 B (6) C (2) 621252 Seating strip (Overider to bumper) (4) 552218 D (4) C (2) E (4) Rubber washer (Bumper to body) (2) GEX7330 A (6) SH606141 (2) GHF120 (6) GHF105 (4) GHF105 (4) B (2) Setscrew; A (2) Bumper to body (6) GHF120 GHF120 (6) A (6) D (4) GHF103 (2) Overider to bumper -lower (2) SH606061 SH606061 (2) A (2) A (2) C (4) F (2) Overider to bumper - upper (2) SH606071 552218 Fitting kit - Front bumper (1) RG1262 B (6) C (2) SH606071 (4) 712563 GEX7330 Includes ALL necessary bolts, nuts, washers & grommets. C (8) D (4) GHF120 (2) A (2) E (4) C (8) C (2) Rear 1/4 bumper; A (6) GHF120 (6) D (4) 712565 E (4) Right hand (1) 811477 A (2) SH606061 (2) Left hand (1) 811476 552218 C (2) GHF120 (6) Setscrew; 712706 A (2) Rear bumper to body (2) GHF120 B (6) GEX7330 709753 C (2) Extension to rear bumper (2) GHF103 B (6) A (6) Bracket to wheelarch (4) GHF105 FRONT BUMPER 552218 Bracket to extension (2) SH606141 811660 Bracket to boot floor (4) GHF105 552218 A = GHF332* D = GHF333* Rubber washer (4) GEX7330 Bumper to body & bracket. B = RTC610A* E = GHF202* 712705 Fitting kit - both Rear 1/4 bumpers (1) RG1263 709753 C = GHF302* F = WP105* Includes ALL necessary bolts, nuts, washers & grommets for 2 bumpers. MK2 GT6

50 BUMPERS DESCRIPTION QTY REQ. PART NO. DESCRIPTION QTY REQ. PART NO. DESCRIPTION QTY REQ. PART NO.

BUMPERS & FITTING Bumpers & Fittings FRONT & REAR (Front & Rear) GHF302* SH604051 GHF333* Mk3 MK3 GT6 GEX7330 Front bumper bar (1) WKC2543 GHF302* Underider; GHF333* Right hand - SH606071 FRONT BUMPER Original (1) 815278 WKC2543 SH606101 Fibreglass (1) 815278FG GHF331* Left hand - GHF300* Original (1) 815277 GHF331* Fibreglass (1) 815277FG SH604071 Setscrew; 815278 Underider to bumper (4) SH604071 FRONT 815278FG Underider to chassis (2) SH604051 Bumper mounting (2) SH606071 GHF302* Bumper corner mounting (2) SH606101 GHF333* Rubber washer (Bumper to body) (2) GEX7330 SH606071 Fitting kit - Front bumper (1) RG1266 Includes ALL necessary bolts, nuts, washers & grommets. GHF331* SH604051 SH604071 SH606101 GHF333* GHF331* GHF302* GHF300* GEX7330 815277 815277FG

718028 519582

‘TRIUMPH’ BADGE FR1202 COMPLETE 626859

‘TRIUMPH’ INSERT ONLY 626859S SELF ADHESIVE

WC106041 (2) Rear bumper - UK Models (1) 914698 Bumper mounting bracket - Inner; 215823 WL205 (2) Right hand (1) 715702 HN2005 (2) Left hand (1) 715701 Bumper mounting bracket - Outer (2) 715706 Rubber washer (Bumper to bracket) (2) GEX7330 Setscrew; GEX7330 (2) Bumper to bracket (2) SH606121 Bumper to bracket (2) GHF105 517263* Bolt (Bumper to wing) (2) GHF120 GHF333* GHF333* Rubber washer (Bumper to wing) (2) GEX7330 GHF120 (2) GHF105 (4) GHF302* Setscrew (Bracket to boot) (2) GHF105 Fitting kit - Rear bumper (1) RG1267 GHF333* Includes ALL necessary bolts, nuts, washers & grommets. GHF302* Not Illustrated No. plate lamp assembly (Inc badge) (1) 718028 Fitted to all UK models & USA models to KF20000. Refer to ELECTRICAL section for bulbs, lenses etc. 715702 (RH) Chrome cover only (1) 519582 715701 (LH) Rubber gasket only (Cover to lamp base) (1) 215823 HN2009 (2) 715706 (2) ‘Triumph’ badge complete (1) 626859 GHF105 (2) Not Illustrated GEX7330 (2) Retaining clip (3) FR1202 SH606121 (2) For badge 626859 to chrome cover. ‘Triumph’ badge insert only (Self adhesive) (1) 626859S Not Illustrated REAR BUMPER 914698 Nut (Number plate lamp fixing) (2) HN2005 Washer - Spring (For nut HN2005) (2) WL205 GHF302* Washer - Flat (For nut HN2005) (2) WC106041 GHF33* Not Illustrated GHF202* REAR

*ITEMS SHOWN ARE NOT ITEMISED IN THE PARTS LISTINGS.

51 INTERIOR TRIM - Seat covers RL1533 912986 912985 912986 912985 916722 RG1181 RG1200 RG1201 RG1210 RG1212 RG1213 RG1214 RG1216 RG1217 RG1226 RG1228 RG1239 RG1232 RG1234* (2) (2) (1) (1) (1) (1) Black & New Tan. Black, Matador Red & Midnight Blue. Black, Matador Red & New Tan. Black, Matador Red, & Midnight Blue. Black, Matador Red, & Midnight Blue. Colours available: (Vehicle Set) All colours (1) (Vehicle Set) All colours (1) (Vehicle Set) All colours (1) (Vehicle Set) All colours (1) (Vehicle Set) All colours (1) (Vehicle Set) All colours (1) Colours available: Colours available: Colours available: Colours available: (Vehicle Set) All colours (1) (Vehicle Set) colours All (1) (Vehicle Set) All colours (1) (Vehicle Set) All colours (1) Seat foams are available separately. Seat foams are Rh Lh Rh Lh Leather with Plain Flutes. Rh & Lh Rh & Lh Vinyl & Leather with Plain Flutes. Vinyl & Leather with (Vehicle set) Cushion & squab (1) (Vehicle set) Cushion & squab (1) (Vehicle set) Cushion & squab (1) Black, Matador Red, Shadow Blue, New Tan, Beige & Chestnut. Black, Matador Red, New Tan, Shadow Blue & Biscuit (ask for colour sample). Black, Matador Red, Midnight Blue, Shadow Blue, & Light Tan. Black, Matador Red, Midnight Blue, Black, Matador Red, Midnight Blue, Shadow Blue & Light Tan. Black, Matador Red, Midnight Blue, Shadow Blue & Light Tan. (1971 - Feb’ 1973) - USA Only (To KF20,000) (Feb’ 1973 Onwards) (From KE/KF20001) (1966 - 1968) (1968 - 1969) (To KC75030) (1969 - 1970) - USA Only (From KC75031) REPLACEMENT TRIM KIT SPECIFICATION REPLACEMENT TRIM KIT SPECIFICATION REPLACEMENT KIT SPECIFICATION REPLACEMENT TRIM REPLACEMENT TRIM KIT SPECIFICATION Vinyl with Perforated & Plain Flutes and Vinyl with Perforated & Plain Flutes and REPLACEMENT TRIM KIT SPECIFICATION; USA SPECIFICATION VEHICLES USA SPECIFICATION Perforated Flutes (Black) - Plain Flutes (Other Colours). Plain Flutes (All Colours). Plain flutes (All Colours). Plain Flutes (All colours). Plain Flutes (All colours). Plain Flutes (All Colours). Cloth faced with vinyl (All Colours). Diamond pattern (All colours) Plain flutes (All colours). Perforated Flutes (Black) - Plain Flutes (Other Colours). Cloth Face with Vinyl and Leather with Plain Flutes. Headrest covers are supplied with these kits. Cushion (Seat base) Cushion (Seat base) Squab (Seat back) Cushion (Seat base) Cushion (Seat base) Squab (Seat back) Vinyl with Diamond Pattern and Leather with Plain Flutes. Vinyl with Diamond Vinyl with Perforated Flutes and Leather with Plain Flutes. Vinyl with Perforated Flutes and Leather Seat cover kits are sold in vehicle sets only and include 2 cushions (base) & 2 squabs (back). and include 2 cushions (base) are sold in vehicle sets only Seat cover kits OCCASIONAL REAR SEAT SQUAB Mk3 Limited availability. Squab seat assy - red (ribbed) vinylWheel arch brackets not included. (1) LEATHER SEAT COVER KIT Trim type: SEAT FOAMS Mk3 GT6 Flutes. Original Spec; Reclining, High Back, Seat Tilts, Vinyl with Perforated VINYL SEAT COVER KIT Trim type: Colours available: LEATHER SEAT COVER KIT Trim type: SEAT FOAMS; Mk3 GT6 Original Spec; Reclining, Headrest, Low Back, Seat Tilts, Cloth Face with Vinyl. CLOTH FACE SEAT COVER KIT Trim type: LEATHER SEAT COVER KIT Note; Trim type: Colours available: SEAT FOAMS; Mk1 GT6 with Plain Flutes. Low Back, Seat Tilts, Vinyl Non-Reclining, Non-Headrest, Original seat spec; VINYL SEAT COVER KIT Trim type: Colours available: KIT LEATHER SEAT COVER Trim type: SEAT FOAMS Mk2 GT6 Original spec; Back, Seat Tilts, Vinyl with Diamond Flutes. Non-Reclining, High VINYL SEAT COVER KIT Trim type: Colours available: LEATHER SEAT COVER KIT Trim type: SEAT FOAMS Mk2 GT6 Original Spec; Reclining, High Back, Non-Tilt, Vinyl with Perforated Flutes. VINYL SEAT COVER KIT Trim type: Colours available: USA SEAT COVER KITS USA KITS COVER SEAT USA DESCRIPTION QTY REQ PART NO. 52 RL1533 RL1533 912985 912985 912986 912986 RX1353 RG1220 RG1222 RG1232 RG1234 RG1204 RG1206 RG1207 RG1181 RG1200 RG1201 RG1202 RG1237 RG1236 RX1353A (2) (1) (1) (2) (1) (1) (2) (2) (2) (1968 - 1969) (To KC75030) (1968 - 1969) (Vehicle Set) All colours (1) Mk2 GT6 - (Vehicle Set) All colours (1) (Vehicle Set) All colours (1) (Vehicle Set) All colours (1) (Vehicle Set) All colours (1) (Vehicle Set); All colours (1) (Vehicle Set) All colours (1) (Vehicle Set) colours All (1) Seat foams are available separately. Seat foams are Rh & Lh Leather with Plain Flutes. Leather with Plain Flutes. Rh & Lh Rh & Lh Rh & Lh Rh & Lh Vinyl & Leather with Plain Flutes. Vinyl & Leather with (Vehicle set) Cushion & squab (1) (Vehicle set) Cushion & squab (1) Black, Matador Red, New Tan, Shadow Blue and Biscuit (ask for colour sample). Black, Matador Red, Midnight Blue, Shadow Blue & Light Tan. Black, Matador Red, Midnight Blue, Shadow Blue & Light Tan. Black, Matador Red, Midnight Blue, Black, Matador Red & Midnight Blue. Black & New Tan. Black, Matador Red, Shadow Blue, & New Tan. Black, Matador Red,& New Tan. Black, Matador Red, Midnight Blue, Shadow Blue & Light Tan (Feb’ 1973 Onwards) (From KE/KF20001) (1971 - Feb’ 1973) (To KE20000) (1969 - 1970) (From KC75031) (1966 - 1968) REPLACEMENT TRIM KIT SPECIFICATION REPLACEMENT TRIM KIT SPECIFICATION REPLACEMENT TRIM KIT SPECIFICATION REPLACEMENT Vinyl with Perforated & Plain Flutes and Vinyl with Perforated Vinyl with Perforated & Plain Flutes and Vinyl with Perforated & Plain Flutes and REPLACEMENT TRIM KIT SPECIFICATION; REPLACEMENT TRIM (Per seat) UK SPECIFICATION VEHICLES UK SPECIFICATION

Plain Flutes (All Colours) Plain Flutes (All Colours) Plain flutes (All Colours) Cloth faced with vinyl (All Colours) Perforated Flutes (Black) - Plain Flutes (Other Colours) Perforated Flutes (Black) -- Plain Flutes (Other Colours) Plain Flutes (All colours) Plain Flutes (All colours) Cloth Face with Vinyl and Leather with Plain Flutes.

Left hand Left hand Right hand Right hand (Per seat)

Headrest covers are supplied with these kits.

Squab (Seat back) Squab (Seat back) Tin (1 litre)Aerosol (370g) (A/R) (A/R) Cushion (Seat base) - Cushion (Seat base) - Squab (Seat back)

Cushion (Seat base) Squab (Seat back)

UK SEAT COVER KITS UK KITS COVER SEAT UK riginal seat spec; Reclining, Non-Headrest, Low Back, Non-Tilt, Vinyl with Perforated Flutes. riginal seat spec; Reclining, Non-Headrest, Seat cover kits are sold in vehicle sets only and include 2 cushions (base) & 2 squabs (back). and include 2 cushions (base) are sold in vehicle sets only Seat cover kits

Vinyl trim/carpet adhesive TRIM ADHESIVE

TRIM RETAINING CLIPS SEAT STRAP KITS - UK & USA spec Mk1 & Mk2 SEAT FOAMS; Note; Trim type: Colours available: LEATHER SEAT COVER KIT CLOTH FACE SEAT COVER KIT Trim type: Colours available: Mk3 GT6 Original seat spec; Reclining, Headrest, Low Back, Seat Tilts, Cloth Face with Vinyl. Trim type: Colours available: SEAT FOAMS; LEATHER SEAT COVER KIT VINYL SEAT COVER KIT Trim type: Colours available: Original seat spec: Reclining, Non-Headrest, Low Back, Seat Tilts, Vinyl Perforated Flutes. Original seat spec: Reclining, Non-Headrest, Low Back, Seat SEAT FOAMS Mk3 GT6 LEATHER SEAT COVER KIT Trim type: VINYL SEAT COVER KIT Trim type: Colours available: Colours available:

Mk2 GT6 O Trim type: SEAT FOAMS Colours available: KIT LEATHER SEAT COVER Colours available: VINYL SEAT COVER KIT Trim type:

Mk1 GT6 Original seat spec; Plain Flutes. Low Back, Seat Tilts, Vinyl with Non-Reclining, Non-Headrest, Mk3 Please call with your requirements stating year & type of seats fitted. We stock a full range of seat trim retaining clips, edge clips & hog rings. DESCRIPTION QTY REQ PART NO. Black White Silver 620656 630755 RX1353 RX3002 RX1353A RG1235 RG1235 RG1235 (All) (Rubber/bristle); FOR YOUR GT6 FOR YOUR THE TRIM YOU NEED TRIM YOU THE Black (1) Tin (1 litre)Aerosol (370g) (a/r) (a/r) WhiteLonghorn silver (1) (1) All coloursColours available: Black, Beige, Blue-Grey, Shadow Blue, Chestnut, Red & Tan. (2) DESCRIPTION REQ. QTY PART NO. Headlining trim kit; Trim Adhesive Trim Carpet/trim adhesive Seals Door Aperture Seal - Door surround Sill weatherseal‘A’ post weatherseal Headlining Trim (2) (2) If you modify it - then you own it! 917951 917957 917953 922703 RB7355 917951C 917957C 917953C 922703C 719918A XKC2528 RB7355SA 719918ASA XKC2528SA INTERIOR TRIM All our re-manufactured interior trim is produced to the highest standard. (Per seat); has been modified in any way whatsoever (ie cut, trimmed, unstitched, etc) stalk (2) stalk (2) stalk (2) 53 If you genuinely believe that any of our trim (seat covers/carpets etc) does not/will not fit, then we will either exchange it, or offer a full refund (in line with our normal procedure). However, if any item of trim (Per seat); by the purchaser in an attempt to rectify a problem, then any claims for faulty goods will be Null & Void. (by 150mm) (by 150mm) (by 150mm) (Per seat); (Pair); (UK & USA spec vehicles) NOTICE Shadow blueChestnutNew tan (1pr) (1pr) (1pr) with Extra long Use if seat is normally positioned fully forward. with Standard stalkwith Extra long Use if seat is normally positioned fully forward. (2) with Standard stalkwith Extra long (2) Black (1pr) with Standard stalk (2) Black (2) Shadow blueChestnutNew tan (2) (2) (2) CUSTOMER IMPORTANT DESCRIPTION REQ. QTY PART NO. 3 point fixing replacement type belts (inc. stalks). Fit all models. Features angle adjustable reel eliminating pivot/guide on top of wheel arch. Suitable for use when non standard seats or a roll-over bar are fitted. Non inertia Inertia seat belt kit - adjustable Static seat belt kit Seat Belts Also see ‘Accessories” for competition type seat belt harness. Inertia seat belt kit Headrests & Covers Headrests Mk3 only Headrest assembly; Headrest Cover 727581 727591 608511 613769 RG1166 RG1102 RG1180 RG1179 RG1108 RG1109 RH5249 RH5249 RH5249 RH5127 RG1109C (1) (1) (1) (1) (44) (44) (Female) (Male) (Pair); (Includes fixing clips) (Inc 44-608511 trim clips) Left hand MK3Colours available: Black, Matador Red, Shadow Blue, Chestnut & New Tan. NOTE: Matador Red to KE/KF20000 - Chestnut from KE/KF20001. (1pr) MK1 & MK2Colours available: Black, Matador Red, Midnight Blue, Shadow Blue & Light Tan. (1pr) Mk1 & Mk2 (Black)Mk3 (Black) (1) trim panels (Pair) (1pr) trim panels (Pair) (1pr) Right hand DESCRIPTION REQ. QTY PART NO. Door trim panel clip General purpose, includes 20 self tapping screws & cup washers. Tailgate trim panel kit; Tailgate Trim Tailgate General purpose, includes 20 self tapping screws & cup washers. Colours available: Black, Matador Red, Shadow Blue, Chestnut & New Tan. Screw & cup washer pack (a/r) Screw & cup washer packGeneral purpose, includes 20 self tapping screws & cup washers. Mk3 (a/r) Rear 1/4 wheel arch Rear 1/4 wheel arch Colours available: Black, Matador Red, Midnight Blue, Shadow Blue & Light Tan. Due to manufacturing restrictions GT6 rear trim panels are only supplied in PAIRS. Trim panels are supplied with matching material for ‘B’post. Mk1 & Mk2 Rear 1/4 & Wheel Arch Panels Trim Door top capping (Black) All models; Door trim panel NOTE: The GT6 had a ‘Suedette’ kick pad (colour matched to NOTE: The GT6 had a ‘Suedette’ of the door trim panel. However, the door trim) on the bottom all our GT6 door trim panels due to manufacturing restrictions only supplied in PAIRS. have Black kick pads, and are strip is no longer available. NB; The plastic chrome finisher Door Trim Panels Door Trim Clip only for above Screw & cup washer pack (a/r) (a/r) Door trim panel retainer Trim clip kit INTERIOR TRIM DESCRIPTION QTY REQ. PART NO. DESCRIPTION QTY REQ. PART NO. DESCRIPTION QTY REQ. PART NO. NEIRTRIM INTERIOR

DASH VENEER SET CENTRE ARMRESTS Centre Armrest FJ2445/9 Dash Facia & Parcel Tray REAR VIEW MIRROR Mk1 & Mk2 Dash veneer set (Replacement 3 piece) (RHD); MK1 & MK2 Please enquire for LHD models - refer to LHD suffixed part numbers Armrest/console assembly Not currently available in Price Guide. Armrest/console recovering kit (1) RG1167 AD610052 Mk1 - Colours available: Black, Red, Midnight blue, Shadow blue & Light tan. Includes material for armrest & handbrake gaiter. Original finish (1) RG1223 Also includes material for tunnel cover. 621767 Burr walnut (1) RG1223BW Mk2 - Mk3 Original finish (1) RG1224 Armrest/console assembly (Complete with handbrake gaiter); Burr walnut (1) RG1224BW Black (1) 822781 REAR VIEW MIRROR Mk3 - Matador red (To KE/KF20000) (1) 820802 Original finish (1) RG1225 Shadow blue (1) 822787 MK3 Burr walnut (1) RG1225BW Chestnut (From KE/KF20001) (1) 822783 Dash Crash pad - Mk3 New tan (1) 824263 Dash top (1) 815281 Armrest/console trim recovering kit; RTC1006 Includes material for armrest & handbrake gaiter. 632095S Dash - Lower facia crash pad - Mk3; Black (1) 822781CVR RHD vehicles - Matador red (To KE/KF20000) (1) 820802CVR SG105144 (2) Drivers side (1) 813271 Shadow blue (1) 822787CVR Passenger side (1) 812981 Chestnut (From KE/KF20001) (1) 822783CVR LHD vehicles - New tan (1) 824263CVR Drivers side (1) 813281 TUNNEL SG104161 Passenger side (1) 812991 Ash Tray (Dash top) (All) (1) 613186 COVERS 632091 Parcel tray; 632095 Mk1 RHD- Drivers (1) 809917 Passenger (1) 809918 Rear View Mirror Mk1 LHD - Drivers (1) 807004 Mk1 & Mk2 Passenger (1) 807005 Rear view mirror (Head only) (1) 621767 Mk2/Mk3 RHD - Tunnel Cover Screw (2) AD610052 Drivers (1) 813745 Self tapping, mirror arm to frame. Passenger (1) 813753 Tunnel cover (Mk3 only); Spire nut/clip (2) FJ2445/9 For Mk1 & Mk2 refer to Centre Console & Tunnel Cover Mk2/Mk3 LHD - recovering kit RG1167. Setscrew (Not illustrated) (2) 512461 Black (1) 822821 Alternative fitment to AD610052 & FJ2445/9. Drivers (1) 813746 Passenger (1) 813754 Matador red (To KE/KF20000) (1) 818852 Mk3 Parcel tray lower crash pad (Support rail); Shadow blue (1) 818857 Mirror head assembly (1) 632095 Right hand (1) 728641 Chestnut (From KE/KF20001) (1) 822823 Mirror head only (Dipping) (1) 632091 Left hand (1) 728631 New tan (1) 818853 Mirror arm only (1) 632095S Centre console; Base (Mirror arm to screen frame) (1) RTC1006 Trim recovering material (Black) (1) 822558 Knee Pads Screw & cup washer pack (a/r) RH5249 Knee pads; Screw; General purpose, includes 20 self tapping screws & cup washers. Mirror arm to head (1) SG104161 Black - Base to screen frame (2) SG105144 MK3 LOWER Right hand (1) XKC2917PA DASH Left hand (1) XKC2916PA CRASH Matador red - PAD Right hand (1) 719432 Sunvisors Left hand (1) 719422 Original sunvisors for Mk1 and Mk2 are no longer available. Shadow blue - Mk3 sunvisors can be installed using our hinged mounting kit Right hand (1) 726807 which includes bars, brackets, retaining rubbers and fixings. Left hand (1) 726797 This kit also allows the visors to be hinged to the side if required. Alternatively, the Mk3 visors can be installed using Chestnut - the Mk3 fixed mounting bars listed below. Right hand (1) 726803 Left hand (1) 726793 ALL MODELS 813271 (RHD) New tan - 812981 (RHD) 813281(LHD) Drivers sunvisor (RHD & LHD) Mk3 (1) 823381 Right hand (1) 729773 Passenger sunvisor (with mirror) Mk3; 812991 (LHD) Left hand (1) 729763 RHD (1) 823311 LHD (1) 823321 KNEE Mounting kit (for hinged visors); (1) RR1461 PADS Inc. bars, brackets, retaining rubbers & fixings. Allows Mk3 visors to be fitted to Mk1 & Mk2. Can also be used to convert Mk3 fixed visors to hinged if required. Mounting bar Mk3 (fixed type) RH (1) 630933 LH (1) 630932 Screw - for Mk3 mounting bar (4) PX505

54 RL1317 DESCRIPTION REQ. QTY PART NO. Footwell Overmats Footwell Tailored overmats Suitable for RHD & LHD. Available in velour or rubber (see accessories). (pr) RX1353 RG1141 RX1353A (a/r) (a/r) 55 (370g) (1 Litre) Tin Aerosol MOULDED CARPET SET CARPET MOULDED OVERMATS Not suitable for moulded carpets. Carpet/trim adhesive UNDERFELT & ADHESIVE Carpet underfelt kit (1) DESCRIPTIONDESCRIPTION REQ. REQ. QTY QTY PART NO. PART NO. RG1218 RG1231 RG1208 RG1250 RG1240 RG1209 RG1230 RG1241 RG1154 RG1156 RG1155 RG1157 RG1154LHD (1) (1) (As Original Specification) (As Original (Rear seat fitted) (Rear seat not fitted) 41.5” deep 31.5” deep 31.5” deep (1) Mk2*Mk2* (1) (1) Mk1* (1) Mk1* (1) *Colours available: Black, Brown, Beige, Red, Navy blue & Light blue. Supplied with 41.5” deep rear load area carpet suitable for all vehicles without rear seat. Cut to 31.5” deep if rear seat fitted. Mk3* (Early) (1) Supplied with 41.5” deep rear load area carpet suitable for all vehicles without rear seat. Cut to 31.5” deep if rear seat fitted. Mk3* (Early)*Colours available: Black, Brown, Beige, Red, Navy blue & Light blue. (1) Supplied with 41.5” deep rear load area carpet suitable for all vehicles without rear seat. Cut to 31.5” deep if rear seat fitted. Mk3* (Late)*Colours available: Black, Brown, Beige, Red, Navy blue & Light blue. (1) Mk3* (Late)*Colours available: Black, Brown, Beige, Red, Navy blue & Light blue. (1) Supplied with 41.5” deep rear load area carpet suitable for all vehicles without rear seat. Cut to 31.5” deep if rear seat fitted. LHD (1) RHD (1) RHD Mk1 & Mk2 (Black) - Mk3 (Black) - HIGH QUALITY TUFTED CARPET SET Luxury wool carpet set; ROTOFLEX Driveshaft Models Tufted carpet set; Luxury wool carpet set; NON-Rotoflex Driveshaft Models NON-Rotoflex Driveshaft Tufted carpet set; TUFTED & WOOL CARPETS pile and Luxury Wool stitched Our range of high quality Tufted include the rear load space carpet sets cover all models and area carpet. & LHD models. Universal fitting for both RHD Passenger area carpet set (Black); Passenger area space carpet. Excludes rear load MOULDED CARPETS CARPETS MOULDED suitable for ALL area carpet sets are Our Moulded passenger ROTOFLEX only. models. Available in Black and NON-Rotoflex carpets. can not be fitted with moulded Note: Underfelt DESCRIPTION Sets Carpet REQ. QTY PART NO. Rear load area carpet; INTERIOR TRIM ACCESSORIES RR1340 The Rocker Feed Kit and Oil Consumption ALL MODELS ROCKER OIL FEED KIT ROCKER OIL FEED Excessive rocker shaft wear is a classic complaint shaft wear is a classic Excessive rocker The external push rod engines. Triumph about the fit feed kit is an effective and easy to rocker piping oil by solution to the problem. It works main oil block from a plug hole in the cylinder galleryhead, up to the cylinder thereby No than standard. maintaining a higher oil flow The installation. for drilling or tapping is required kit is so good, it looks as though it should always been there! have EXTERNAL ROCKER FEED KIT When the supplementary gear is oil feed to the rocker fitted, in oil consumption is often encountered. an increase worn valve down This is attributed to oil being drawn through amount of lubricating oil flowing The extra guides. chamber, and rocker the valve the feed kit, as supplied by worn down for oil to be sucked any tendency exaggerates The best solution is to stems. guides past worn valve valve and guides,fit new valves on the top but this is not always of oil assist in the reduction To priority list. of the repair stem oil the guides a method of valve down being sucked offer the simple do-nut rubber ring We seal is required. that is used so successfully on MG sports cars. Its part AEK113,number is stem. one per valve the to fit them without removing bit... How the clever Now head from the car? cylinder the stem above seal needs to be fitted to the valve Each spring upper retaining the valve guide but below valve cap(s). Remove the rocker cover, rocker gear and the spark the holes that the push rods come up through plugs. Cover the Turn into the engine. so nothing can be dropped down so that number one piston is at bottom dead crankshaft (BDC). Feed a length of clean,centre the pliable rope down spark plug hole of number one cylinder, a bit leaving it. Now,hanging out so you can retrieve and slowly hand, by turn clockwise carefully the crankshaft a will be felt as the rising piston in that bore resistance the rope against the combustion faces of the compresses in that cylinder, valves two holding them against their collets and spring caps of that cylinder The valve seats. without the fear of losing the valves be removed can now stem oil seals can be fitted to The valve the bore. down stems and perhaps a new set of valve valve these two springs. Be honest, set! the cost of a decoke this tip has saved been stem oil seals and other parts have Once the valve satisfactorily, to this first pair of valves refitted simply turn to BDC, anticlockwise the crank the rope and withdraw and pairs of cylinders the process on the remaining repeat valves. sufficiently that the rope has compressed be sure To against the faces of the valves, attempt to push the valves hand,by before the rockers as if being acted on by the spring caps or collets,removing this is the fail safe as it does This method can be adopted anywhere check. air, the use of compressed not require special tools or luck. ROCKER FEED - GT6 KIT ALL MODELS 143943 RX1352 AED172 GPS117 RB7050 RL1575 RX1346 RX1347 RX1348 RX1349 RM8230 11K2846 RX1351/0 RX1351/0W (A/R) 56 (1 Litre) (for adaptor 11K2846) RECOMMENDED FOR ALL OWNERS! RECOMMENDED FOR (combined gauge) (Use after cleaning) (Each) (Each) (for remote mounting of gauge) (for remote All models All Models Temp sender to water pump housing sender to water Temp Oil pipe to block 29.58ml Sachet250ml Bottle400ml Aerosol (A/R) (A/R) (A/R) PairEach (1) (2) Oil Pressure/Water Temp Gauge Kit - Temp Oil Pressure/Water ‘T’ Piece Use if retaining oil pressure warning light. warning oil pressure Use if retaining Bracket Oil Pressure Gauge Kit Oil Pressure Adaptor; (copper) Washer Oil pressure switch Oil pressure Cleaning Fluid (K&N) K&N Filters Element Oil These units replace the existing air cleaner box and improve engine breathing - they look good too! fluids. and re-oiling cleaning to order Don’t forget Note: depending upon application., changing require Carb needles may see ‘Fuel System’. ENGINE 516375 RS1456 RR1296 FIT AN OIL COOLER KIT FOR PEACE OF MIND. COOLER KIT FOR FIT AN OIL TKC378A TKC378AP RR1275 RR1243 RR1238 RR1238SK changing easier & cleaner. easier changing (Crackle finish) (Crackle

Note: GEG413T. use thin gasket Refer to page 10 for further fitting info. Alloy finish Alloy Black

his kit converts the standard ‘Bowl’ type Filter to the ‘Bowl’ his kit converts the standard

T more efficient ‘Spin-on’ Cartridge type which makes filter makes ‘Spin-on’ Cartridge type which efficient more Service kit for adaptor (1) Oil Filter Cartridge (1) Adaptor (1) with engine oil cooler. Vehicles Adaptor (1) without engine oil cooler Vehicles

SPIN-ON OIL FILTER CONVERSION SPIN-ON OIL FILTER OIL PRESSURE GAUGE KIT Thermostat (Engine oil cooler)Not included in oil cooler kit. (1) Engine oil cooler kit converts to spin-on type oil filter. Also Suitable for all vehicles. (1) Engine oil cooler kit or spin-on oil filter. Suitable for vehicles fitted with standard (1)

Kits include oil cooler radiator, Kits include oil fitting kit, filter adaptor, hoses & fittings, but not thermostat. OIL COOLER KIT Alloy Rocker Cover; Rocker Alloy

K&N AIR FILTERS ALLOY ROCKERALLOY COVER to AH RX1381 . GEU9405UR RX1410 Air horns (Electric type) ‘Compressed Twin - Air’ Horns. chairs and general leisure use leisure and general chairs and off, automatically. providing they use a 12 volt battery; without the danger of overcharging. ), this superb product constantly revitalises Can also be used for these applications AH The battery charger that turns on All models Suitable for all 12 volt batteries (from 5 Suitable for all 12 volt batteries the battery cell life, - helping to extend cells Designed to be left connected for long periods. Designed to be left connected for long periods. Use without disconnecting vehicle electrics. battery condition display. L.E.D. Thermal facility. cut-out 12 month guarantee. Battery Conditioner Kit - Caravans, lawn mowers, motorbikes, motor boats, wheel Comes complete with all fittings & operating instructions. Comes complete with all fittings & operating Fits as direct Fits as direct replacement. Starts engine regardless or of compression temperature. using up to 50% power cranking Up to 200% more less current. AIR HORNS Uprated Hi-Torque Starter Motor Hi-Torque Uprated Outright sale, no exchange. UPRATED HI-TORQUE UPRATED STARTER MOTOR BATTERY CONDITIONER 100 BATTERY CHARGER BATTERY Conventional type 6v/12v GAC7106 LOOK AT THESE BENEFITS; LOOK AT RG1255 RX1424 RB7065 GHT142S GSP6462 GCL110HP GCL132HP 57 ELECTRICAL Mk1 & Mk2 (12 volt) Mk3 (6 volt) Inspection Lamp/Halogen Plugs into cigar lighter. KENLOWE ELECTRIC FAN KIT ELECTRIC FAN KENLOWE INSPECTION LAMP UPRATED IGNITION UPRATED SYSTEMS Kenlowe Electric Fan Kit Kenlowe These kits offer a maintenance free ignition system, These kits offer a maintenance free (in place of contact points) with potential for improved performance and fuel economy. Electronic Ignition Kit (Newtronic) Sports Coil (performance) Silicone Plug Lead Set Spark Plug - High Performance GLB484 RB7129 RB7082 RB7160 RX1370 GLB472X RX1263 each pair RB7092 (Supplied in Pairs) RHD (with or without pilot) LHD (with or without pilot) (pilot type) LHD - France Halogen Bulb (100/80w uprated) Halogen Bulb (100/80w uprated) Halogen Bulb ‘Xenon’ (60/55w) ‘Xenon’ Halogen Bulb Front ‘Fog light’ Aftermarket product. Ideal for working on you car or for jobs around the Ideal for working 240v-500w tungsten halogen lamp, Inc. house. 2m cable and BS plug. Halogen conversion kit; Portable Halogen Worklight (500w) Worklight Portable Halogen PORTABLE WORKLIGHT PORTABLE Rear fog light/guard Rear fog light/guard Aftermarket product. REAR FOG LIGHTS FRONT FOG LIGHTS HALOGEN HEADLAMP HEADLAMP HALOGEN KIT CONVERSION ACCESSORIES GENERAL ACCESSORIES UPRATED DISCS & PADS COMPETITION TYPE HARNESS A popular alternative to standard seat belts - these really do look the part! The 4-point harness shown (no. 1) can be converted to the 6- point type by the inclusion of the crotch strap listed (no. 2). Note that fittings (eye bolts, reinforcement plates & bolts/spacer sets) are supplied separately. Harnesses are supplied singularly in 2” wide red webbing (black or blue webbing supplied to special order). This harness is designed for road use - please contact us if you have specific FIA/RAC approved type requirements. EBC turbo groove discs and ‘Green Stuff’ Kevlar pads. Handed discs (rh/lh) with curved grooves QTY & dimples offer superb stopping power when REQ. combined with pads. The pads may be fitted to 1 HARNESS, competition type, red standard discs also. (each) (2) RX1500 Uprated Discs & Pads (Set) 2 CROTCH STRAP, red (each) (2) RX1501 Mk1, Mk2 & Mk3 early (to KC56077, KE/KF12389) RG1059UR 3 SHOULDER PADS, ‘Securon’ (pair) (2) RX1502 available in red or black Mk3 late (KE/KF12390 onwards) RG1060UR Uprated Discs (pair) 213227UR 4 SHOULDER PADS, ‘Triumph’ (pair) (2) RX1414 Uprated Pads (set) black Mk1, Mk2 & 5 EYE BOLT SET (pair) (2) RX1503 Mk3 early (to KC56077, KE/KF12389) GBP132GS 6 REINFORCEMENT PLATE SET (pair) (2) 621112 Mk3 late (KE/KF12390 onwards) GBP216GS Pins/shims available separately. 7 BOLT & SPACER SET (pair) (2) RX1505

BRAKE HOSE SET - GOODRIDGE

2 TRIUMPH SHOULDER PADS RX1414

3 44 55 66 77

For firmer brake pedal. Stainless Steel braided SECURON SHOULDER hoses. PADS RX1502 Also available singularly. Goodridge Performance Brake Hose Set DOOR LOCKS POLYURETHANE BUSHES Car set (4 hoses) RG1292GR CHASSIS PLATE

Please refer to ‘Suspension’ Door Locks - deadlock type (pr) 631773DL section on page 23-28. For improved security. Uses barrel type keys. Chassis Plate RL1431 Note: doors can only be locked/unlocked from outside vehicle. VEHICLE RECORD LOG & HANDBOOK WALLET

Glovebox wallet/folder RX1421 Look & Be Organised. This wallet is ideal for holding your owners handbook, service/MOT log, invoices & MOT certificates. Service/MOT record log RX1422 A visible service record of your classic. Use this log book for keeping a full record of your classics service, tax & MOT dates. Over the years the historic record will prove to any potential purchaser how you have cared for your car.

58 RR1370 GAM261 GAM262 GAM213 GAM214 GAM105 RL1528L RL1528W RL1528LA RL1528WA Non Overdrive Models Non Overdrive Style (RH/LH) ’ MOUNTNEY WOOD RIMMED - MOUNTNEY WOOD RIMMED RL1466 Bullet ‘ (larger Amco (larger style) (larger Amco (larger style) LH RH RH LH Wood Leather Wood Leather Black Black Chrome Chrome SOLID MOUNTING KIT SOLID MOUNTING GEAR LEVER KNOBS Solid Mounting Kit (alloy)Replaces original rubber mountings and clamps. Provides Note: positive feel to steering. more more also transmits road noise and vibration. (1) Gear Lever Knob - Door Mirror - Including fittings. Door Mirror - Standard RL1067 GLZ608 GLZ608FK BULLET STYLE DOOR MIRROR - GAM105 pair - (to original spec) 59 (Triumph logo) (Triumph MOTO-LITA LEATHER RIMMED - RIMMED LEATHER MOTO-LITA RR1173 Fitting Kit Front Spoiler (Mk3 only) Sill Kick Plates Sill Kick MOTO-LITA WOOD RIMMED - WOOD RIMMED MOTO-LITA RR1170 RL1466 STEERINGFITTINGS & WHEELS RR1170/13 RR1170/14 RR1173/13 RR1173/14 RL1232 (1) CHROME BLACK OR DOOR MIRRORS (1974 on) 13" dia - flat (1) 13" dia - flat14" dia - flat (1) (1) 14" dia - flat (1) Leather Rimmed Wood Rimmed Wood Semi-Dished (13") OVERSILL TRIM KIT FRONT SPOILER - MK3 SILL KICK PLATES DOOR MIRRORS Oversill Trim Kit (all models) Trim Oversill Motolita Steering Wheel Motolita Steering Wheel Rimmed Steering Wood Mountney Kit includes pair of stainless steel sill covers and Kit includes pair of stainless steel sill covers strips. retaining Inc. Boss & fittings. Inc. Motolita Steering Wheel Motolita Steering Boss & fittings. Inc. ACCESSORIES GENERAL VEHICLE NUMBER ACCESSORIES MUDFLAPS VALVE CAPS PLATES

Valve cap set, Triumph HMP190129 STANDARD BASEBALL CAP Mudflaps (Pair) Front (Inc. fittings) GAC630F Rear (Inc. fittings) GAC630R HEADLAMP STONEGUARDS DELUXE-3D

‘Rimmer Bros’ Baseball Cap RX1425

BLACK - PRESSED ALUMINIUM PERSONAL ORGANISER

Headlamp Stoneguards (pair) RR1175 Mk1 & Mk2 only. Clip on. OVERMATS BLACK - ACRYLIC

Land Rover Personal Organiser Superb value! BLACK - ACRYLIC (ENGRAVED) 14 x 20cm (6 ring) in dark burgundy with Land Rover badge. Binder only STC50440 ONLY AVAILABLE TO PERSONAL CALLERS. Binder & diary insert STC50440K New legislation from 1/1/03 states that number plates can only be sold directly to the owner of Footwell (Front) tailored overmats; Suitable for RHD & LHD models. KEY RING the vehicle together with proof of ownership and Velour (Pr) RL1317 personal identification. Rubber (Pr) RL1317R We will need sight of the following three original documents:- Vehicle registration document (V5) Driving Licence or utility bill. Passport or credit card (with photo ID), or travel/works pass (with photo ID). Number plates are made to special order. Key ring/fob; Please note that it is also now mandatory in the UK for all ‘Laurel’ RM8194 new number plates to bear the originating suppliers name, ‘Triumph shield’ RF4109 postcode and telephone number (i.e. Rimmer Bros). Vehicle Number Plate - Front Standard NPF VOUCHERS Standard with ‘GB’ logo NPFGB Deluxe - 3D effect NPF3D Deluxe - 3D effect with ‘GB’ logo NPF3DGB Vehicle Number Plate - Rear Standard NPR Standard with ‘GB’ logo NPRGB Deluxe - 3D effect NPR3D COFFEE MUG Deluxe - 3D effect with ‘GB’ logo NPR3DGB Vehicle Number Plate (Pair) - Black Black background, Silver letters Legal on Vehicles Reg. to 1/1/73 . Pressed aluminium (PR) RX1365 Rimmer Bros ‘Vouchers’; Acrylic - standard letters (PR) RX1365B Vouchers make an ideal present for Classic car owners. Acrylic - engraved letters (PR) RX1365A £5.00 value RX1337 £10.00 value RX1338 Fitting Kit - number plates NPK £20.00 value RX1339 Universal kit including 4 self tap screws, 2 white cups, ‘Triumph’ Coffee Mug RX1264 £50.00 value RX1341 2 yellow cups & 8 double sided adhesive pads.

60 ACCESSORIES ADVERTISING PRINTS DECALS & BADGES Reproductions of Original Triumph Adverts. We have available a good selection of full colour advertisements/posters as released by Triumph - British RG1252 Leyland, representing adverts used Worldwide.

Cream GT6 Mk1 RG1252 Picture: GT6 on headland. Caption: ‘Humming tires. Snarling engine. Whistling wind. Triumph GT6’ White GT6 Mk1 RG1253 Picture: Low close-up shot from rear of car. Reg No FWK 319D. Caption: ‘All the world wants the new Triumph GT6.’ Red Mk1 & Le Mans racing GT6 RG1254 Picture: 2 shots, 1 showing Le Mans car number 50, & red Mk1 at speed on road. Reg No FKV830D. ‘Union Jack’ badge (30 x 50mm) Caption: ‘Bred at Le Mans, to put you safely ahead!’ Enamel RX1299 RG1253 Red GT6 Mk2 RG1153 Stick-on RX1299S Picture: 2 cars passing on main road. Reg No MRW998G. Caption: ‘More sting in the engine. More cling in the tail.’ Grille badge ‘T. S. O. A’ HMP121001 Red GT6 Mk2 & chassis RG1249 ‘Triumph Sporting Owners Association’ Picture: Blue Mk2 rolling chassis in foreground with red Mk2 Cloth badge ‘BL Motor Sports’ HMP190078 passing at speed in background. ‘Sew-on’ product. Caption: ‘Our winning streak.’ White GT6+ RG1238 Picture: White USA spec GT6+ (Mk2) parked on wooden bridge. Caption: ‘TRIUMPH GT6+.’ TRANSFERS Yellow GT6 Mk3 RG1151 Picture: Woodland scene & 3 inset shots. Reg No SVC394J. Caption: ‘Triumph GT6 Mk3, now read on... Styled For The Fast Life.’ White GT6 Mk3 RG1242 Picture: Woodland scene showing front of car. Reg No TWK176K. RG1254 Caption: ‘Triumph GT6 Mk3, Triumph put in what the others leave out.’ Yellow GT6 Mk3 RG1243 Picture: 3 shots in profile - Side (Main),Front & Rear. Reg No RVC439H. Caption: ‘The Triumph GT6 Mk3.’

RG1243

RG1153

‘Triumph Laurel’ Leaf Transfer - Large (200mm dia) Popular application - Bonnet RG1249 Black XKC3700 RG1242 Gold XKC3702 Silver XKC3701 Red RB7222 ‘Triumph Laurel’ Leaf Transfer - Small (50mm dia) Popular application - Front Wing Black, Gold or Silver RB7178 RG1151 TAX DISC HOLDER FREE

RG1238

MODEL CARS Tax disc holder (Free of charge) RX1355 DECAL

Die Cast Model Cars - 1/18 GT6 Mk3 Red RG1295 Green RG1295-01 Decal ‘Rimmer Bros’ RA1055 White RG1295-02 Black/Silver, Self adhesive.

61 CAR STORAGE ACCESSORIES CAR-CAPSULE The dry solution for car storage problems.

Car-Capsule practically eliminates the problems of dust, dirt, scratched paintwork & moisture retention, which can lead to corrosion problems. Quick and very easy to use, Car-Capsule is suitable for both long and short term storage. The energy efficient (low-voltage) fan maintains a continuous flow of filtered air passing over and through the stored vehicle. Car-Capsule helps prevent interiors from becoming damp & musty during storage. Dolomite Car-Capsule (480x180cm) RX1402 Also available in 420x160cm (RX1401) & 540x200cm (RX1404) sizes.

OUTDOOR ‘MONSOON’ SEMI-TAILORED CAR COVERS FEATURES... Tough grey outer skin Soft non woven lining Double stitched with heated seams Roof vents allowing moisture to escape Under body securing straps with soft fastener covers Elasticated front & rear hems for snug fit Our range of semi-tailored outdoor car covers offer total protection with a UV resistant to prevent paint fade range of sizes to suit all applications. Complete with zipped storage bag Spitfire, GT6, TR2 & 3 RX1516 TR4 - 6, TR7 - 8, Dolomite, Herald, Vitesse RX1517 Great value for money! Stag RX1518 2000/2500 saloons, Rover SD1 RX1519 Extra large - Range Rover etc RX1520 TOTAL PROTECTION! INDOOR TAILORED CAR COVERS Cover It up ! Look at these features ... Breathable Cotton material. Available in a choice of colours. Excellent tailored fit. Superb Value for Money. Embroidered Model Name/Logo. Supplied with FREE Storage Bag. Manufactured in the UK.

These quality tailored indoor car covers are exclusive to Rimmer Bros, and have been individually designed for each model to ensure a really close fit. They are manufactured to our specification in a 'Breathable Sateen Cotton' material that is strong, but yet light in weight, making them very easy to fit. They will provide ideal protection whilst your car is in the garage - whether just parked up for a few days, or stored over the winter months - from dust, bright sunlight and from those annoying little marks when people brush past. The covers, which are available in a choice of colours, are supplied with a matching storage bag. This product is manufactured Solely in the United Kingdom. Available in Blue, Red & Green. GT6 ‘Sateen’ Car Cover RG1158 Indoor Car Covers also available for other models.

62 By Dr RX1534 MAN - s health. Not a ’ with text and with text ’ Ian Banks. 128 pages. step- The practical guide to by-step men motoring manual, but a health manual in the style presented All models, shapes, sizes & colours, 120,000BC to present day. trouble-shooting ‘ Haynes Manual ’ Man of a Haynes car repair guide! Covers basic health guide! Covers of a Haynes car repair advice and illustrations. Men are far more likely to look after likely far more Men are illustrations. bodies! Reading this could their cars than their own between a healthy,mean the difference high breakdown. mileage life and premature ‘ LEYLAND CARS OF THE 70’s films made to launch of those wonderful A celebration at British Leyland. some famous cars of the golden years Includes footage of the Maxi, Marina, and Princess. Allergo (62 minutes in total). RX1442 Produced by The British Motor IndustryThe British Motor by Produced (BMIHT),Trust Heritage these videos are the footage from archive compiled from used things of how us past and remind Very entertaining. to be! THE TRIUMPH MARQUE film unit at its the STANDARD-TRIUMPH This video shows best, teams, and race the fortunes of rally following it of the Standards, the major successes covers and TR’s and the introduction of the from 1953 to 1968 Spitfires TR5. Footage of the 25th Monte Carlo Rally is also included. RX1436 TRIUMPH HERALD in the Herald Triumph of the This video includes the launch Albert Hall,Africa and the gruelling test journey across Raymond Baxter footage of the Canley production factory. adds the informative commentary. RX1437 HAYNES OWNERS TRIUMPH VIDEOS WORKSHOP MANUAL RT1250 RL1222 RF4128 RX1412 RS1401 RO1068 RO1069 RG1001 RR1020 RB7210 RH5194 RX1292AD RO1069AD RA1007 63 Autodata 2000/2300/2600 3500 EFi) 2300/2600/3500 (exc BOOKS & VIDEOS TR2-4A TR6 TR7 Stag Spitfire GT6/Vitesse Herald Autodata FWD (1965-73) Triumph Dolomite 1300 SD1 Carburettor Manual Carburettor WORKSHOP MANUALS (HAYNES) Weber, Zenith, Stromberg. (1970-92) Range Rover RL1395 512947 511243 510322 545053 545277 511243 545254 RS1542 AKM3629 AKM3635 AKM3974 AKM5343 AKM3971 AKM3966 AKM3079B 545277HBS AKM4329SCVR AKM4329HCVR RT1223 RL1379 RB7283 Repair operation times Repair operation Soft Cover (Pocket Size) (Pocket Cover Hard Spitfire (Pocket Size) (Pocket Spitfire GT6/Vitesse Herald Dolomite Sprint Dolomite Sprint - Triumph 2000/2500 Triumph SD1 (1982 on) TR4/TR4A TR5 Pi Supplement TR6 size) TR5/TR250/TR6 (Pocket TR8 Stag Stag - Engine Service Manual Mk1/2/3 Spitfire MkIV Spitfire 1500; Spitfire TR7 WORKSHOP MANUALS (FACTORY) Spitfire 1500 Spitfire TR7 Convertible Dolomite SALES BROCHURES (ORIGINAL) ACCESSORIES BOOKS ACCESSORIES PARTS BOOKS - ‘BRITISH LEYLAND’ TR2/3 501653SC TR4 510978 TR4A 514837 TR250 516914 TR5 516915 TR6 (to 1973) 517785A TR6 (1974 to ’76) RTC9093A TR7 (1975 – 78) RTC9814CA TR7 (1979 on RTC9828CC TR7/8 (to ’79) RTC9020B Stag 519579 Spitfire (‘4’ Mk1 & Mk2) 511682 Spitfire (Mk3) 516282 Spitfire 1500 (Late) RTC9819CB GT6 (Mk1 & Mk2) 515754 GT6 (Mk3) 520949A Herald (1200 – 12/50) 510597 Herald (13/60) 517056 Vitesse (1600/2000 Mk1) 511408 Vitesse (2 Litre Mk2) 517786 Dolomite (All Models) RTC9822CB Triumph 1500 (RWD) RTC9019A

OWNERS HANDBOOKS TR4 510326 TR4A 512916 TR250 545033 TR6 545078 See catalogue for full listings TR7 USA (1977) RTC9209-77 TR7 (Coupe 77–81) AKM4332 TR7 (‘81 on inc. conv.) AKM4853 TR8 AKM4779 Stag 545105 Spitfire Mk3 545017 Spitfire MkIV 545220 Spitfire 1500 RTC9221 Spitfire 1500 (USA) AKM4544 GT6 (Mk1) RG1293 GT6 (Mk2) 545057 GT6 (Mk3) 545186 Herald (1200 & 12/50) 512893 Herald (13/60) 545037 Vitesse (1600 Mk1) 511236 Vitesse (2 Litre Mk1) 545006 Vitesse (2 Litre Mk2) 545070 Dolomite Sprint 545601 Triumph 2000/2500 AKM3617 SD1 - Refer to catalogue

64 40 RL1374 RX1523 RA1320 RH5071 RB7375 RR1339 RM8227 42 41 Complete Guide (Herald/Vitesse) Complete Guide (Herald/Vitesse) The Land Rover Experience The Land Rover Sheppard) (Tom - Triumphs The Works of Motorsport 50 years (Robson) 296 pages. TR7 & TR8 Triumph 66 Pages. Guide. Owner & Buyers Taylor). (James Manual Restoration Spitfire View Books). 112 pages (Bay TR4/5/6 Autofolio (Bill Piggot) NOT SHOWN for availability. Please enquire TR: Triumph Cars Series Haynes Great 39 RL1418 RL1417 RL1638 RL1637 RV6117 RX1507 RX1295 RX1439 RG1294 RO1129 RH5300 RH5299 RW3033 not shown (Glovebox size) (Glovebox s: Collectors Guide ’ Road & Track on Triumph Triumph on Track Road & (RW Kastner). 28 pages. 96 pages (William Krause). Classics reprint,(Practical 186 pages). Robson). 128 pages. (Graham Robson). (Graham (Karen Pender) 192 pages. (Karen (Brooklands). 76 pages. (RM Clark - Brooklands).100 pages. (RM Clark -Brooklands).100 pages. (Brooklands). 88 pages. (RM Clark - Brooklands).172 pages. (RW Kastner). 64 pages. Workshop Manual Workshop Vitesse (Haynes) GT6 & & Vitesse Restoration Book Road Test Book Road Test ‘ Sports Cars 74-82 38 Manual GT6 Competition Prep 39 Sports Cars Triumph 40 Mk3, Spitfire IV, 1500 41 TR Triumph 42 & GT6) Collectors Guide (Spitfire - DIY Guide -Spitfire, Herald, 31 StoryThe Complete SD1 - 32 Classics on Herald Practical 33 59-71 Herald Triumph 34 Vitesse 62-71 Triumph 35 36 Portfolio 52-61 TR3 Gold TR2 & 37 Manual Competition Prep Spitfire 65 RT1227 RX1357 RX1509 RX1296 RX1429 RX1430 RX1506 RX1304 RX1303 RX1269 RA1319 RO1070 RA1070 BOOKS RM8226 8 – 100 pages. 1967-74 1947-1981 – – s: The Complete Story ’ (Michael Cook) (Michael Williams) 192 pages. Soft cover. (Roger (Bayview Books). 80 pages (Robson). 192 pages 90 pages Track) (Road & Tests/Spec’s,*Road Performance Data, new model instructions, long term reports, rallying, touring, guide. plus buyers 208 pages. Hardcastle) (David 208 pages. Hardcastle) (David Vitesse 1976-86) (3500 & Pollard) (David (James Taylor) Note: catalogue for other titles. to Range Rover refer (Brooklands) 100 pages Advertising Triumph 96 Pages. Young). (Daniel Purchase & Restoration Guide & Restoration Purchase 17 Book Test 2000/2500 Road 30TR4A TR4 & to Restore How 21 TR Triumph 22 Sports Cars Triumph 23 Dolomite Portfolio* 24V8 Engine The Rover 25V8 Engines Rover Tuning 26 Book Test SD1 - Road 28The Complete Story - Range Rover 29America Cars in Triumph 18 Saloon Cars 1920 Sports Cars TR2 Essential Triumph 27 Range Rover- RL1479 RL1390 RF4114 RF4125 RX1388 RX1497 RX1428 RX1294 RS1694 RS1525 RG1140 RA1226 RB7688 RR1325 RB7207 RM8221 (1970-86) ’ Range Rover Range Rover ’ Original Restorers Guide Restorers Bill Piggot) TR4/5/6 112 pages Bill Piggot) Guide to Origins Triumph TR5/250 TR6 & Triumph ‘ ‘ (Robson) 200 pages Thomason) 158 pages (By John Paperback, 192 pages with over 300 photographs and illustrations. (Bill Piggot) 160 pages (James Taylor) 352 pages (Robson & Langworth). (Bill Piggot) 128 pages ( (Bill Piggot) 128 pages. 200 colour photos (James Taylor). 96 pages. 190 colour photos. Taylor). (James 25 26 27 28 29 30 31 32 9 10111213141516 17 18 19 20 21 22 23 24 12 345678 33 34 35 36 37 38 10 Informative Spitfire/GT6 11 Stag Portfolio* 13 TR6 Portfolio* 8Years The Sporting - Triumph 9The Complete Story 2000/2.5Pi 5 6 Cars: Triumph The Complete Story 7 - to restore How 12Track TR4/5/250 Road & 14 TR7/8 Gold Portfolio* 15 Portfolio* Spitfire 2 Original TR2/3/3A 3 TR4/4A/5/6 Original Triumph 4 TR7 & TR8 Original Triumph 1 Stag - Triumph Original 16 GT6 Portfolio* REFERENCE & INFORMATION BOOKS ACCESSORIES ACCESSORIES RL1360 RX1262 WHEELS Prevents the Prevents build up of brake dust and stops corrosion. Protects against road salt, tar and Gives an grime. shine. incredible WHEEL WAX WHEEL WAX Wheel Wax (225g) WIRE WHEEL CONVERSION KIT WHEEL TRIM SET MINILITE REPLICA MINILITE KITS WHEEL See page 29 for details. See page 29 for details. Chrome Wheel Trim Set Chrome Wheel Trim RX1353 RX1353A GAT140 RX1385 RX1514 21A2818 RX1328A 66 (370g) (1 Litre) (1 Litre) HOW DOES ‘DIS-CAR-NECT’ WORK? Tin Tin Aerosol Adhesive (Carpet/trim); Clutch Alignment Tool Clutch Wrench Oil Filter Strap Spring Compressor Tool Spring Compressor Wheel nut Brace For cartridge (spin-on) type filter. Spark Plug Spanner When leaving your car,When leaving the knob to simply remove fuse will The 16 amp by-pass isolate the starter circuit. (stereo to all other electrical circuits maintain current memories, vehicle alarm etc). 150 amps, over Because the starter motor draws any the starter motor will attempt to connect (hot wire) instantly cause the fuse to blow, immobilising the car If this should happen,until the knob is replaced. simply the 16 amp fuse at a convenient time. replace security,For extra the immobiliser and remove unscrew knob completely, your vehicle and if you intend to store for some time, battery will also prevent 'Dis-Car-Nect' drain, the fuse. the knob and remove simply unscrew Fits all vehicles and is easily fitted to any battery terminal. Full installation/user instructions supplied with every unit. 514578 GBF901 RX1423 RX1356 RX1345 RX1511 RX1508 RX1542 RX1543 GGC102 GAC100 GAC111 RX1406 GCH112 RX1356F GHF6093 RX1356K RX1226OHV (100g) (Pack of 100) (Pack GENERAL CONSUMABLES (80ml tube) TOOLS (Aerosol) starter immobiliser ’ (Bradex) (Holts, 250ml) (Tube) (95g) (Tube) (Tube) (24ml) (Tube)

(Large - 400ml) (Large Overhead Valve Overhead Valve Models

Replacement fuse Replacement screw knob Replacement screw Grease Gun Grease Door Gap Adjusting Tool tool spring compressor Valve Bolts between ‘A’ and ‘B’ posts to maintain correct door ‘B’ posts to maintain correct and ‘A’ Bolts between chassis. sills or repairing size when replacing aperture Rear Hub Puller VEHICLE SECURITY Dis-Car-Nect ‘ Hylomar (Gasket Sealant) Hylomar (Gasket Brake cleaner Brake Radweld Silicone Sealant Rubber Grease Brake Rubber Gloves Latex WD40 Loctite Exhaust jointing compound Copaslip Easystart ’ RX1395 RX1396 RX1397 RX1398 RX1407VM Premium ‘ RX1407VMP unleaded depending upon ’ UNLEADED 250ml 250ml Super FUEL ADDITIVES FUEL ‘ 1/2 Pint 1 Pint 2 Pint All Three Jugs or application. It usually works out application. It usually works to use bottled additives cheaper it out for than leaded or LRP - work yourself! Castrol Valvemaster Castrol Valvemaster Plus of British Historic the federation Endorsed by Clubs (FBHVC),Vehicle been independently having tested and approved, both products offer a high seat recession level of protection against valve under all driving conditions. In addition, castrol an octane boost to plus provides valvemaster pinking reduces unleaded petrol which premium or performance on high compression or knocking the need to This also usually avoids applications. of petrol. 250 litres Treats engine. your re-tune Bottled additives are available which available Bottled additives are can be mixed with either OIL JUGS Castrol Oil Jugs 514578 GGL111 RX1358 GGL657 RX1417 RX1363 GBF103 RX1327 RX1326 HMP190104 67 (Multi-Purpose) Unipart 0.5 Litre (Tube) Unipart 0.5 Litre 4.55 Litre/1 Gallon 4.55 Litre/1 4.55 Litre/1 Gallon 4.55 Litre/1 Lithium Grease Lithium Grease Cam Lube (for assembly) Brake Rubber Grease Rubber Grease Brake GREASE & LUBE BRAKE/CLUTCH FLUIDS Unipart (DOT 3) 1 Litre Unipart (DOT Silicone 1 Litre* Silicone 0.5 Litre* *Do not mix with standard fluid *Do not mix with standard Castrol Classic XL (20W/50) Unipart (10W/40) Semi-Synthetic 5 Litre Duckhams Q Storage Oil Q Storage Duckhams Gallon Castrol Running In Oil 4.55Litre/1 GGL104 GGL614 GGL190 GAC2018 GAC2019 HMP190100 LUBRICANTS & FLUIDS LUBRICANTS 4.55 Litre/1 Gallon 4.55 Litre/1 4.55 Litre/1 Gallon 4.55 Litre/1 1 litre ENGINE OIL CAPACITY (INC FILTER) 4.7 LITRES. (INC FILTER) ENGINE OIL CAPACITY Duckhams Q (20W/50) Duckhams Unipart (20W/50) COOLING SYSTEM (INC HEATER) 6.2 LITRES (INC HEATER) COOLING SYSTEM Unipart 1 Litre Unipart 5 Litre ANTIFREEZE GEAR OIL ENGINE OIL Unipart (EP90) 0.5 Litre 0.9 LITRES. GEARBOX 1.4 LITRES & OVERDRIVE GEARBOX DIFFERENTIAL 0.6 LITRES ACCESSORIES ACCESSORIES RX1312 RX1313 RX1314 RX1315 RX1316 RX1317 RX1318 RX1319 RX1320 RX1321 RX1322 RX1323 RX1324 RX1325 RX1433 RX1368 RX1510 RX1415 RX1416 RX1443 RX1367 GTT101 GTT308 RL1330 311346 RX1329 RX1406 RX1399 RX1364 RX1344 RX1408L 21A2818 523638A RX1408X GAC9904 GAC2999 RX1408M RX1405 (500ml)* (55ml)* (21sq ft)* (325ml)* (500ml)* (325ml)* (325ml)* (325ml)* * (1 Litre)* (approx. 55” chest) (325ml)* (500ml)* (For jack etc) (For jack (325ml)* (325ml)* (approx. 47” chest) (Stirrup type) (Synthetic Chamois)* kit (approx. 51” chest) triangle only (50mm) ’ ’ ’ ball ‘ membership & relay pack membership & relay Extra large Extra Large Medium Wooden handled cleaning brush & dispenser. Wooden ’ Special cleaning solution (580ml). Finishing/protection solution (180ml) 2 pair of disposable gloves. Silicone Resin Polish Silicone Resin Shampoo/Conditioner Bodywork Car Interior Shampoo Glass Polish Cutting Polish Gloss Protection Extra Bumper Care Vinyl & Rubber Care Cream Leather Care Chrome Polish Superglym Clean Wheels Perfect Polishing Cloth Aqua Dry Clean Machine & Maintenance Kit Hood Care (Silicone spray) Wheel Seal Alloy Dressing Instant Tyre Remover Intensive Tar Wash Leather Wash Autoglym Car Care Pack Care Autoglym Car includes items marked OTHER CAR CARESponge PRODUCTS AUTOGLYM CAR CARE PRODUCTS CAR AUTOGLYM Warning First-Aid Suitable for all Steel, wheels (including Wire and Alloy painted & chromed), cleaning system uses ‘Concours’ wheel a unique 2-stage process that not only cleans, but gives wheels a superb lasting finish that helps to protect them, for and clean in the future. making them easier to care Wheel Cleaning Kit - ‘Concours’ Kit includes; Cleaning solution breaks down brake Brush & dispenser gets into all dust & road grime. those awkward places. Finishing/protection solution leaves wheels like new. The ‘Concours’ specialist wheel cleaning system The wheels. will help you care for your Classic’s AA ‘CONCOURS’ SPECIALIST WHEEL CLEANER Cover (Tow ball) (Tow Cover ‘ Lightweight (Disposable) overalls; Rubber disposable gloves Supplied in packs of 100. your hands clean & help protect your skin. They keep bag only Tool Tow Bar only Tow ball & electrical fittings Less tow Tow Ideal for those roadside repairs. Keep a pair of these very purpose lightweight general handy in the boot,overalls you never know! Be Safe - Be Seen. ‘ Wheel nut brace pump Tyre ‘ Extinguisher Fire Scissor jack & handle Scissor jack Safety jacket (Luminous) Safety jacket RX1031 RX1032 RX1027 RX1029 RX1028 RX1033 RX1030 RX1026 RX1025 RX1024 RX1023 68 (400ml) (200ml) 5 Litre can 5 Litre 2.5 Litre can 2.5 Litre cartridge 2.5 Litre 1 litre 500ml BODY CARE Use with 2.5 litre cartridge Use with 2.5 litre Extension probe gun spray Use with high pressure Aerosol Inc. RX1028,Inc. RX1030, RX1031 Waxoyl; Waxoyl starter kit Waxoyl Trigger spray gun spray Trigger gun spray High pressure Aerosol seal; Underbody FINNEGANS ‘ANTI-CORROSION’ WAXOYL FINNEGANS ‘ANTI-CORROSION’ ROADSIDE TOOLS & TOURING EQUIPMENT See page 26 for details. See page 69 See page 15-18 for details. UPRATED SUSPENSION UPRATED PACKAGES STAINLESS STEEL EXHAUSTS & SPORTS STANDARD n/a RX1266 RX1538 RX1261 RX1265 RX4070A RX4048A RX4049A RX4047A RX1432A RX1432B RX4070B (BRUSH IN CAP) RX1432AL (400ml) RX4064A RX4064B RX4072A RX4072B RX4009A RX4009B RX4020A RX4020B RX4057A RX4057B RX4019A RX4019B RX4061A RX4061B RX4053A RX4053B RX4015A RX4015B RX4066A RX4066B RX4058A RX4058B RX4060A RX4060B RX4067A RX4067B RX4000A RX4000B RX4068A RX4009A RX4009B RX4057A RX4057B RX4065A RX4065B RX4053A RX4053B RX4059A RX4059B RX4071A RX4071B RX4060A RX4060B RX4063A RX4063B RX4064A RX4064B RX4072A RX4072B (450ml) PAINTS (Suitable for Wheels) (Suitable for (For general touch up) touch (For general (Suitable for Wheels) (Suitable for Aerosols & Touch-in Tins Aerosols & Touch-in GT6 BODY PAINTS GT6 BODY Brush-on (125ml) (Tin) Black (400ml) (Aerosol) Black Black Brush-on (125ml) Black Aluminium (400ml) (Aerosol) BODY COLOURBODY TRIUMPH AEROSOLTIN/CRAYON TOUCH-UP Wedgewood BlueWedgewood 26 BlueValencia 66 Carmine RedDamson RedPimento Red 82 Magenta (Red) 17 Sienna Brown 72 92 Mimosa Yellow 23 Saffron Yellow 64 GreenEmerald 54 GreenLaurel 65 GreenMallard BlueFrench 55 106 BlueSapphire 126 96 Body colours issued for Mk3 White 19 Body colours issued for Mk1 & Mk2 White 19 COLOUR/TYPE BL COLOUR CODE AEROSOL TOUCH-IN Damson RedSignal RedSienna Brown 27 Jasmine Yellow 32 23 Conifer Green 34 GreenLaurel 25 BlueRoyal BlueWedgewood 55 26 BlueValencia 56 66 CHASSIS PAINT Chassis Paint GENERAL (Aerosol) APPLICATION (400ml) - High Gloss Black - Matt (500ml) Black - Satin (500ml) Black Silver PRIMER (Aerosol) White (150ml) Red Oxide (150ml) (150ml) Grey ENGINE PAINT Engine Paint (High Heat) Lacquer - Clear ACCESSORIES GENERAL FASTENERS FASTENERS GENERAL

BOLTS (Imperial) STEEL NUTS (Nylon Insert Self Locking- Metric) HOSE CLIPS Use as required. Bolts have a NON Threaded Shoulder. Thread Thread Thread PART Spanner Diameter Type Pitch NUMBER Size 3/8" to 1/2" GHC304 The threaded length can be calculated by multiplying the 7/16" to 5/8" GHC405 diameter by 2 and adding 1/4”. M 6 Metric Fine 1.0 NY106041 10mm M 8 Metric Fine 1.25 GHF232 13mm 1/2" to 3/4" GHC406 Thread Bolt Thread Thread PART Spanner Diameter Length Type Pitch NUMBER Size M 10 Metric Fine 1.5 GHF233 17 mm 5/8" to 7/8" GHC507 1/4” 1.5” UNF ___ GHF102 7/16” AF M 12 Metric Fine 1.75 NY112041 19mm 3/4" to 1" GHC608 1/4” 2” UNF ___ GHF118 7/16” AF 7/8" to 1.1/8" GHC709 5/16” 1.5” UNF ___ GHF104 1/2” AF BRASS NUTS (Standard & Deep Section - Imperial) 1" to 1.3/8" GHC811 5/16” 2” UNF ___ GHF121 1/2” AF Thread Thread Thread PART Spanner 1.1/8" to 1.5/8" GHC913 Diameter Type Pitch NUMBER Size 1.3/8" to 2" GHC1015 3/8” 1.5” UNF ___ GHF106 9/16” AF ___ 3/8” 3” UNF ___ GHF126 9/16” AF 5/16” Std UNF 515369 1/2” AF 1.1/2" to 2.1/8" GHC1217 1/2” 2” UNF ___ BH608161 3/4” AF 3/8” Std UNF ___ GHF262 9/16” AF 2" to 2.3/4" GHC1622 1/2” 2.5” UNF ___ BH608201 3/4” AF 3/8” Deep UNF ___ AEC350 9/16” AF 1/2” 3” UNF ___ BH608241 3/4” AF GREASE NIPPLES 5/8” 3” UNF ___ GHF113 15/16” AF (Imperial) WASHERS Part Number Thread Size Angle 5/8” 4” UNF ___ BH610321 15/16” AF Plain Repair Spring Shakeproof Standard Large Standard Standard UHN400 1/8" BSP straight, short Diameter Diameter Diameter Diameter (Metric) UHN445 1/8" BSP 45º angle BOLTS Internal PART PART PART PART LN30041 1/8" BSP 90º angle Bolts have a NON Threaded Shoulder. Diameter NUMBER NUMBER NUMBER NUMBER 144825 1/8" BSP straight, long 3/16” WP20 ______The threaded length can be calculated by multiplying the 56935 1/4" BSP straight 1/4” GHF300 GHF314 GHF331 GHF321 diameter by 2 and adding 6mm. 125361 1/4" BSP 45º angle 5/16” GHF301 GHF315 GHF332 GHF322 Thread Bolt Thread Thread PART Spanner 56934 1/4" BSP 90º angle Diameter Length Type Pitch NUMBER Size 3/8” GHF302 GHF316 GHF333 GHF323 M 6 40mm Metric Fine 1.0 GHF132 10mm 7/16” WC600071 ___ GHF334 GHF324 M 8 40mm Metric Fine 1.25 GHF134 13mm 1/2” WA112081 ___ GHF335 GHF325 POP RIVETS M 10 40mm Metric Fine 1.5 GHF136 17mm 5/8 ” PWZ110 ___ LWZ310 LWZ410 Part Number Size M 12 50mm Metric Fine 1.75 BH112101 19mm Open End Type M 12 60mm Metric Fine 1.75 BH112121 19mm (Metric) M 12 80mm Metric Fine 1.75 BH112161 19mm WASHERS RA607096 2.9mm x 5mm *Plain *Repair Spring Shakeproof RA608126 1/8" x 3/16" M 16 60mm Metric Fine 2.0 BH116121 21mm Standard Large Standard Standard M 16 80mm Metric Fine 2.0 BH116161A 21mm Diameter Diameter Diameter Diameter RA608176 1/8" x 1/4" Internal PART PART PART PART RA608236 1/8" x 5/16" Diameter NUMBER NUMBER NUMBER NUMBER RA608253 1/8" x 3/8" SET SCREWS (Imperial) M 6 GHF300 GHF314 WL106001 GHF371 Closed End Type Set screws are Fully Threaded. M 8 GHF301 GHF315 GHF382 WF108001 RU608123 1/8" x 3/8" Thread Bolt Thread Thread PART Spanner M 10 GHF302 GHF316 GHF383 WF110001 RU608313 1/8" x 1/2" Diameter Length Type Pitch NUMBER Size M 12 GHF304 ___ WL112001 WF112001 ___ RU612123 3/16" x 5/16" 1/4” 3/4” UNF GHF117 7/16” AF M 16 PWZ110 ___ WL116001 WF116001 1/4” 1” UNF ___ GHF101 7/16” AF *Please Note: Some plain and repair washers are suitable for 5/16” 3/4” UNF ___ GHF120 1/2” AF imperial and metric applications eg: GHF300 = 1/4” ID or 6mm ID. CABLE TIES 5/16” 1” UNF ___ GHF103 1/2” AF 3/8” 1” UNF ___ GHF105 9/16” AF Part Number Diameter GHF1265 3 1/2" 7/16” 1.5” UNF ___ GHF107 5/8” AF SPLIT PINS (Metric) SELF TAPPING GHF1266 5 1/4" 1/2” 1.5” UNF ___ GHF109 3/4” AF Pin Pin PART SCREWS RTC222A 6" 1/4” 1” UNC ___ GHF161 7/16” AF Thickness Length NUMBER Pan Head - Pozi Drive GHF1267 8 3/4" 1/4” 1.5” UNC ___ SH504121 7/16” AF 2.0mm 40mm PS104400 Screw Screw PART 2.5mm 40mm GHF509 GHF1268 11" 5/16” 1” UNC ___ GHF163 1/2” AF Size No Length NUMBER 5/16” 1.5” UNC ___ GHF164 1/2” AF 6 1/2” GHF421 3.2mm 56mm GHF510 3/8” 1” UNC ___ GHF165 9/16” AF 6 3/4” GHF422 4.0mm 56mm GHF511 PIPES AND FITTINGS 3/8” 1.5” UNC ___ GHF166 9/16” AF 8 1/2” YZ3404 Part Number Material Size 8 3/4” GHF424 'P' CLIPS Brake and Fuel Pipe Supplied in 25 foot rolls. SET SCREWS (Metric) 10 1/2” GHF425 MPKF125 CUPRO-NICKEL 3/16" Dia. 10 3/4” YZ5505 Imperial Sized Set screws are Fully Threaded. Part Cable Fixing MPKF225 CUPRO-NICKEL 1/4" Dia. Thread Bolt Thread Thread PART Spanner 12 1/2” GHF427 MPKF325 CUPRO-NICKEL 5/16" Dia. 12 3/4” GHF428 Number Diameter Hole size Diameter Length Type Pitch NUMBER Size PCR207 1/8" 7/32" EF125 STEEL 3/16" Dia. 12 1” GHF429 M 6 25 mm Metric Fine 1.0 GHF131 10mm PCR307 3/16" 7/32" EF225 STEEL 1/4" Dia. 14 3/4” GHF430 M 8 25 mm Metric Fine 1.25 GHF133 13 mm PCR309 3/16" 9/32" EF325 STEEL 5/16" Dia. M 10 25 mm Metric Fine 1.5 GHF135 17mm 14 1” GHF431 PCR311 3/16" 11/32" Part Number Thread Size Pipe Bore PCR407 1/4" 7/32" Pipe Nuts - Male, Steel. STEEL NUTS (Plain NON Locking - Imperial) PCR409 1/4" 9/32" SPLIT PINS (Imperial) TM606031 3/8" UNF 3/16" Thread Thread Thread PART Spanner PCR411 1/4" 11/32" TM110051 10mm x 1mm 3/16" Diameter Type Pitch NUMBER Size Pin Pin PART PCR507 5/16" 7/32" 3/16” UNF ___ HN2005 3/8” AF Thickness Length NUMBER LK21994 3/8" BSF 3/16" 1/16” 1.5” GHF500 PCR509 5/16" 9/32" BCA4370 7/16" UNF 3/16" 1/4” UNF ___ GHF200 7/16” AF PCR511 5/16" 11/32" 5/16” UNF ___ GHF201 1/2” AF 5/64” 1.5” GHF501 BHA4706 7/16" UNF 1/4" 3/32” 1.5” PC34 PCR607 3/8" 7/32" AUSU40A 1/2" UNF 5/16" 3/8” UNF ___ GHF202 9/16” AF PCR609 3/8" 9/32" 7/64” 1.5” GHF503 Pipe Nuts - Male, Brass. 7/16” UNF ___ GHF203 5/8” AF PCR611 3/8" 11/32" 1/8” 2.25” PC15 AEHU1 3/8" UNF 3/16" 1/2” UNF ___ GHF204 3/4” AF PCR707 7/16" 7/32" 9/64” 2.25” GHF505 AEHU2 10mm x 1mm 3/16" 1/4” UNC ___ GHF207 7/16” AF PCR709 7/16" 9/32" 5/32” 2.25” GHF506 AEHU3 3/8" BSF 3/16" 5/16” UNC ___ GHF208 1/2” AF PCR711 7/16" 11/32" 3/8” UNC ___ GHF209 9/16” AF 11/64” 2.25” GHF512 AEHU7 7/16" UNF 1/4" 3/16” 3” GHF513 PCR807 1/2" 7/32" PCR809 1/2" 9/32" Pipe Nuts - Female, Steel. (Plain NON Locking - Metric) 7/32” 3” PS614240 TN606031 3/8" UNF 3/16" STEEL NUTS 1/4” 3” PS616240 PCR811 1/2" 11/32" Thread Thread Thread PART Spanner PCR813 1/2" 13/32" SU2A 10mm x 1mm 3/16" Diameter Type Pitch NUMBER Size PCR1007 5/8" 7/32" SU4A 7/16" UNF 1/4" M 4 Metric Fine 0.7 NH104041 7mm HU41A 1/2" UNF 5/16" M 6 Metric Fine 1.0 GHF212 10mm SELF TAPPING PCR1009 5/8" 9/32" M 8 Metric Fine 1.25 GHF213 13mm PCR1011 5/8" 11/32" Pipe Nuts - Female, Brass. SCREWS PCR1207 3/4" 7/32" AEHU1A 3/8" UNF 3/16" M 10 Metric Fine 1.5 GHF214 17mm Countersunk - Pozi Drive M 12 Metric Fine 1.75 GHF215 19mm PCR1209 3/4" 9/32" AEHU2A 10mm x 1mm 3/16" Screw Screw PART PCR1211 3/4" 11/32" AEHU4A 7/16" UNF 1/4" Size No Length NUMBER PCR1407 7/8" 7/32" Part Number Thread Size STEEL NUTS (Nylon Insert Self Locking - Imperial) 6 1/2” GHF400 PCR1409 7/8" 9/32" Thread Thread Thread PART Spanner 6 3/4” GHF401 Bleed Screws Diameter Type Pitch NUMBER Size PCR1411 7/8" 11/32" 556508A 3/8" UNF 8 1/2” GHF402 PCR1607 1" 7/32" 3/16” UNF ___ GHF220 5/16” AF 8 3/4” GHF403 608400A 10mm metric 1/4” UNF ___ GHF221 7/16” AF 10 1/2” GHF404 Metric Sized 27H7166 3/8" BSF 5/16” UNF ___ GHF222 1/2” AF 10 3/4” GHF405 CP105081 8mm 5mm Part Number Capacity 3/8” UNF ___ GHF223 9/16” AF 12 1/2” AC612041A CP108101 10mm 8mm Pipe Clips 7/16” UNF ___ GHF224 5/8” AF 12 1” AC612081 CP108121 12mm 8mm GHF1191 SINGLE, 3/16" 1/2” UNF ___ GHF225 3/4” AF 14 3/4” AC614061 CP106161 16mm 6mm GHF1192 SINGLE, 1/4" 5/8” UNF ___ 138563 15/16” AF 14 1” AC614081 CP108165 16mm 8mm 624155 DOUBLE, 3/16"

70 I Ignition switchIndicatorInner wing - rearInstrumentsInterior lamp 36 J 46 JackJet, 36 carb 37 36 K K&N filter fanKenlowe Key fob plates - sillKick Kit, brakes 13 68 Kit, coolant hoses 13, 12, 56 57 59 60 12 30 H Halfshaft, axleHandbooks cableHandbrake Haynes manualHead, cylinder 21, 22 HeadlampHeadrest 32 Heater hoses 64 Heater valve 63 Horn 10 Hose clips, coolant 35,Hose kit, 57 coolantHoses, coolantHoses, 12 heater 53 Hub, front 12 12 Hub, rearHub cap 12 Hub puller 37 12 Hydraulics, brake 12 23 21, 22 31, 32 21, 22 29 G Gaiter, gear leverGaiter, handbrake sets - engineGasket GaugesGear oilGearbox 19 10 32 Gear knobGearbox mountingsGlassGrille, radiator 37 11 67 19, 59 19 39, 41 42, 44 E Electronic ignition kitEnginesEngine mounts 34, 57 EP90 oilExhaustExpansion tank, coolantF 11 12 Fan belt 7 Fan, KenloweFiller cap, fuel 67 15-18 Filter, airFilter, fuelFilter, oil extinguisherFire Flasher units 12 12 14 hoses,Flexi brakes coupling,Flexible steeringFloat needle 13 68 Float 13 33 Floors 32 8 Fluid, 37 & clutch brake FlywheelFog lampsFollower, camshaft 13 32 Footwell matsFront hubFront wing 46, 47 13 Fuel additive 11 36, 57 Fuel filler cap 55, 9 60 Fuel filterFuel level senderFuel pump 39, 40 Fuel pipe kit 23 Fuel tank 67 14 Full engine 14 Fuses 13 13 14 14 7 37 D Dash veneerDifferentialDipstickDisc, brakeDis-car-nectDistributorDoor glass 54 Door mirrors 21 Door sealsDoor skins 30 8 Doors 66 Door gap adjusting tool 34 Drive belts 43, 59 44 Drive shafts 38 Driving lamps 44 43 43-45 21, 22 12 57 71 C Cable, acceleratorCable, chokeCable, handbrakeCaliper, brakeCam lube 13 CamshaftCap, distributor 32 Car cover 13 Carb floatCarburettor 30 CarpetsChain, 67 timing 34 Chassis 11 cableChoke Clips, 62 coolant hosesClock 13 13 fluidClutch pipeClutch 11 55 kitClutch 12 master cylinderClutch 13 38 fork release Clutch cylinder slave Clutch Coil 11 11 Coil springs, suspension 37 11 Column, steering 19 11 24-28 Con rod 11 CondenserConstant velocity joint pointsContact breaker Coolant 33 20-22 Coolant hoses 34 Copper grease 34 plug setCore 34 Cover, 9 carCover, clutchCover, rocker 12, 12 67 Cover, timing 67 Crankshaft PulleyCrankshaft 8 CV jointCylinder block 62 11 Cylinder head 10 Cylinder liner 11 9 9 20-22 8 10 8 Post 47 Post 43 ’ ’ B A AA membership pack cableAccelerator Aerosol, paintAir filter 68 Alignment tool, clutch wheelsAlloy 13 AlternatorAntifreeze 11 Anti-roll bar 69 - wheelArches Armrest 13 Axle 29 39, 40, 46 34 67 23 54 21 ‘ BadgesBalljointBatteryBattery chargerBelts (seat)Bearing, releaseBearings, mains/Big Ends 49, 61 Block, cylinder panelsBody 37 23 9 Bolt kits, suspension 53, 58 37 Bolts, head cylinder 11 BonnetBooks 25 Boot floor 8 39-47 Bottom hose 10 caliperBrake cleanerBrake discBrake 39, 40 drumBrake fluidBrake 63-65 hydraulicsBrake 47 12 padsBrake 30 66 pipe kitBrake pipes/hosesBrake 30 31, servoBrake 32 31 shoesBrake 32 - engineBreather Bulbs 32 30 32 Bump stopBumpersBush kits, suspension 24, 31 25, 27, 13 28 Bush, absorber shock 31 Bushes, suspension 24, 27, 28 35-37 28 50, 23-28 51 B A ‘ INDEX R S INDEX Radiator 12 Seal, door 44 Rear axle 21 Seals, oil 6 Rear hub 21, 22 Seal, windscreen 42 Rear view mirror 54 Seat belts 53, 58 Rear wing 46, 47 Seat covers 52 Regulator, window 45 Sender, fuel level 14 Relays 37 Sender, temperature 12 Release bearing 11 Servo, brake 31 Release fork, clutch 19 Shear bolt, ignition 33 Repair kit, brake mast.cyl 31 Shock absorber 24, 26, 27, 28 L P Repair kit, clutch mast.cyl 11 Shoes, brake 31 Lamps 35, 36 Pads, brake 30 Repair kit, clutch sl.cyl 11 Short engine 7 Leads, spark plugs 34 Paint 69 Repair panels 39-47 Side lamps 35 Liners, piston 8 Pedal rubber, brake 31 Repeater lamps, front 35 Side repeater lamps 35 Link, anti-roll bar 23 Pedal rubber, clutch 11 Rev counter 37 Sills 46 Locking wheelnuts 29 Pilot (spigot) bush 9 Reverse switch 36 Sills trim 59 Pipes, brake 32 Ring gear, flywheel 9 Slave cylinder, clutch 11 M Pistons - engine 9 Rings, piston 9 Solenoid 19, 34 Manifold - exhaust 15, 16 Plate, clutch 11 Roadwheel 29 Soundproofing kit 55 Master cylinder, brake 31 Plug lead set 34 Rocker arm 10 Spark plug 34 Master cylinder, clutch 11 Plug, core 8 Rocker cover 10, 56 Speedometer 37 Metering needle 13 Points 34 Rocker gear feed kit 56 Spigot (pilot) bush 9 Mirror, rear view 54 Poly bushes 23-28 Rocker shaft 10 Spin-on oil filter 8, 56 Mirror glass, doors 43 Pressure cap, coolant 12 Roof panel 48 Spoiler - front 59 Models - car 61 Propshaft 20 Roto flex 22, 28 Sports exhaust system 16-18 Mounting, engine 11 Pulley, Crankshaft 9 Rotor arm 34 Springs, suspension 24, 26, 27, 28 Mounting, gearbox 11 Pump, water 12 Running-in oil 67 Spring compressor tool 24, 66 Mudflaps 60 Push rod, clutch 11, 19 Springs, valve 10 Pushrod (OHV) 10 Sprocket, camshaft 11 Stainless steel exhaust 15-18 N Starter motor 34 Steering arm 23 Needle guide 13 Steering column 33 Needle valve 13 Steering wheel 33 Needle, carb 13 Steering rack 33 Non-return valve, servo 31 Stub axle 23 Number plate lamps 36 Studs, roadwheels 29 Number plates 60 Stromberg carbs 13 Nuts, roadwheel 29 Sump 8 Sun visors 53 O Suspension bushes 23-28 Oil 67 Suspension kits 25, 26 Oil cooler kit 8, 56 Switches & controls 36 Oil filter 8 Oil pump 8 Oil pressure gauge 8, 56 Q Oil pressure switch 8 Quarterlight Oil seals 6 front 44 Oil seal, valve stem 10 rear 48 Overdrive 19 Quarter valance (front) 41 Overhaul kits - suspension 25

72 INDEX T W Tailgate 48 Washer bottle 34 Tank, fuel 14 Washer jet 34 Temperature fender 12 Washer pump 34 Thermostat, coolant 12 Water pump 12 Thermostat, oil cooler 8 Waxoyl 68 Timing chain 11 WD40 66 Timing cover 11 Wheel cylinder 31 Tools 66, 68 Wheel studs 29 Top hose 12 Wheel, alloy 29 Tow bar 68 Wheel, wire 29 Track rod end 33 Wheelarch Transfers 49, 61 front 39, 40 rear 46 Transmitter, oil press. 8 Wheelbox, wiper 34 Trim panels 53 Wheelnuts 29 Trunnion - suspension 24 Wheelstud 29 Tubular exhaust manifold 16 Window regulator 45 U Windscreen 42 Windscreen seal 42 Universal joint 20, 21, 22 Wing Uprated brakes 30 front 39, 40 Uprated suspension packs 26 rear 46, 47 Wiper blade 34 V Wiper motor 34 Vacuum advance unit, distr 34 Wipers 34 Valance Work light 57 front 41 Wiring Looms 37 rear 47 Wire wheels 29 Valve guides 10 Wishbone - front 23, 24 Valve springs 10 Workshop consumables 66 Valve caps 60 Vertical link front 23 rear 27, 28 Vouchers - Rimmer Bros 60 Videos 63

ACKNOWLEDGMENTS Rimmer Bros would like to thank the many GT6 owners who volunteered their cars for location photography used in this catalogue.

73 226 PAGES

210 PAGES

185 46 PAGES PAGES

218 42 74 PAGES PAGES PAGES 76 PAGES

64 PAGES 106 90 PAGES PAGES

90 PAGES OUR CATALOGUES ARE YOUR PASSPORT TO THE FINEST MAIL-ORDER PARTS SERVICE RIMMER BROS CATALOGUES 44 PAGES If you are a Triumph, SD1, Range Rover, 32 Freelander or Discovery owner - a catalogue will PAGES be despatched FREE including post & packing. Small postage charge made for additional catalogues. FOR YOUR COPY, PHONE, FAX, WRITE OR E-MAIL, BROWSE OUR CATALOGUES QUOTING YOUR CUSTOMER NUMBER IF POSSIBLE. ON YOUR PC! FULL SET OF CATALOGUES (POSTAGE CHARGES) SEE PRICE GUIDE £10 (UK) £15 (Europe) £35 (Rest of World) FOR DETAILS Once registered as a customer for a specific vehicle you will be automatically updated (free of charge) with any new catalogue or price guides as they are published. DO YOU HAVE ANY OLD UNITS? WE’RE BUYERS AS WELL AS SELLERS Alongside our new parts, we also offer parts which have been reconditioned (to the very highest standards). Because of this, we are often in the market for engines, gearboxes and axles which are suitable for reconditioning purposes. Please give us a call.

ALL PARTS ARE GUARANTEED “It’s our objective to ensure the satisfaction of every one of our customers.” Please refer to our Price Guide for warranty information.

GAINSBOROUGH SCUNTHORPE GRIMSBY

A156 A1500 B1398 A15 A46

LOUTH B1241 A156 SAXILBY A158

A57 A57 B1398

WORKSOP (A1 NORTH)

B1190 ROAD LINCOLN

DODDINGTON RING B1190 B1188 A1133 A46 B1190 A1434

B1178

RAF B1188 A1 WADDINGTON A46 B1178

B1202 B1189

A15 NEWARK-ON-TRENT B1191 A607 A17 WOODHALL

A1 B1188

GRANTHAM SLEAFORD

BUSINESS HOURS 8.30am - 5.30pm Monday to Friday. 8.30am - 1.30pm Saturday. (Closed Sunday and Bank Holidays Except Good Friday)

HOW TO FIND US We’re 2 miles south of Lincoln, on the A15 Lincoln to Sleaford Road.

Rimmer Bros Ltd. Triumph House, Sleaford Road, Bracebridge Heath, Lincoln LN4 2NA, England. Telephone: 01522 568000. Fax: 01522 567600. E-Mail: [email protected] www.rimmerbros.co.uk