DOCSLIB.ORG

Isometric Projection

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Isometric Projection ISOMETRIC PROJECTION •It is a method of producing pictorial view of an object showing all three faces of the object simultaneously. •It is a type of parallel projection •It is a type of axonometric projection ORTHOGRAPHIC ISOMETRIC 300 450 ISOMETRIC DRAWING A TYPE OF PICTORIAL PRESENTATION AXONOMETRIC PROJECTION DIMETRIC ISOMETRIC TRIMETRIC CONSTRUCTION OF ISOMETRIC SCALE • Draw a horizontal line AB. • From A draw a line AD at 45o to represent actual or true length and another line AC at 30o to AB to measure isometric length. • On AD mark the point 0, 1, 2 etc to represent actual lengths. • From these points draw verticals to meet AC at 0 , 1 , 2 etc. The length A1 represents the isometric scale length of A1 and so on. AB/AD = COS 45 AND AB/AC = COS30 degree Cos45/cos30 = 0.81 Isometric Length = 0.81 × Actual Length All the dimensions measured along or parallel to isometric axes (-X, -Y and -Z) will taken as Isometric Length. METHODS OF CONSTRUCTING ISOMETRIC PROJECTION BOX METHOD - • When an object contains a number of non-isometric lines, the isometric drawing may be conveniently constructed by using the box method. In this method, the object is imagined to be enclosed in a rectangular box and both isometric and non-isometric lines are located by their respective points of contact with the surfaces and edges of the box. OFF-SET METHOD - • Off-set method of making an isometric drawing is preferred when the object contains irregular curved surfaces. In the off-set method, the curved feature may be obtained by plotting the points on the curve, located by the measurements along isometric lines. REPRESENTATION OF BOX METHOD PENTAGON IN A BOX • DRAW ORTHOGRAPHIC PROJECTION (MULTIVIEW – TOP VIEW /FRONT VIEW) OF THE GIVEN PENTAGONAL PRISM ASSUMING AXIS IS PERPENDICULAR TO HP/VP. • LEVEL THE VIEWS AS A, B, C, D & E. • DRAW HORIZONTAL AND VERTICAL LINES THROUGH EACH CORNERS (A, B, C, D & E) OF PENTAGON (TOP VIEW). • THESE HORIZONTAL AND VERTICAL LINES WILL FORM A RECTANGLE (BOX) – 1,2,3,4 IF EXTENDED. • Redraw/transfer the rectangle 1234 in isometric view. • Draw edge 12 and 23 of rectangle inclined at 300 (iso-angle) to ground/xy-line. Subsequently, mark point 4 and complete the rectangle. • TRANSFER POINTS A,B,C,D AND E OF PENTAGON ON RECTANGLE 1234. ISOMETRIC VIEW OF A PENTAGONAL PYRAMIS STANDING ON HP O’ 1. HEIGHT IS ADDED FROM CENTRE OF PENTAGON IN ISOMETRIC VIEW. 2. Invisible edges/lines like O’D are not drawn. REPRESENTATION OF FOUR POINTS/OFFSET METHOD PP S S P R Q R Q ISOMETRIC PROJECTION OF CIRCLE THROUGH FOUR POINTS METHOD STEPS – 1. DRAW THE CIRCLE OF GIVEN RADIUS. 2. Enclose the circle in a Rectangular Box by drawing horizontal and vertical lines being tangent on circle. 3. Redraw the rectangle, PQRS on isometric axis keeping QP and QR inclined at 300 to ground. 4. Draw mid normal on QR and QP through point S as SC and SD. Also, draw mid normal on SP and SR through point Q as QA and QB. 5. 1A & 2D will intersect each other at point 3 and 1B & 2C will intersect each other at point 4. 6. Draw arcs keeping 1 as centre and 1A/1B as radius, 2 as centre and 2C/2D as radius, 3 as centre and 3A/3D as radius and 4 as centre and 4B/4C as radius. 7. Join the arcs to get the isometric projection of a circle, which will be an ellipse. ISOMETRIC PROJECTION OF CIRCLE THROUGH OFF-SET METHOD STEPS – 1. DRAW THE CIRCLE OF GIVEN RADIUS. 2. Enclose the circle in a Rectangular Box, ABCD by drawing horizontal and vertical lines through points 1,3,5 &7 being tangent on circle. 3. Join bD and Ac which will cut the circle at 2 & 6 and 4 & 8. 4. Draw tangents or horizontal/vertical lines through points 2,4,6 & 8 which will cut rectangle, abCD at points F, G, H, I, J, K, L &E. 5. Redraw the rectangle, ABCD on isometric axis keeping AB and AD inclined at 300 to the ground. 6. Transfer all the points of abCD on ABCD. 7. Join points 1, 2,3,4,5,6,7,8 and 1 through a smooth curve, to get the isometric projection of a circle, which will be an ellipse. A square prism base side-40 mm, height-50 mm is placed centrally on a rectangular slab sides-100 mm x 60 mm and thickness-20 mm. Draw the isometric projection of the combination. Plan and Elevation of combination Isometric projection of combination A pentagonal pyramid of base side-30 mm, and axis length-60 mm is resting on HP on its base with a side of base perpendicular to VP. Draw the isometric projections. A frustum of cone base diameter-50 mm, top diameter-25 mm and height-50 mm is placed centrally on a cylindrical slab of diameter-100 mm and thickness-30 mm. HP on its base with a side of base perpendicular to VP. Draw the isometric projection of the combination. ASSIGNMENT DRAW ALL THE PROBLEMS OF THE PROBLEM SHEET ON ISOMETRIC PROJECTION DISTRIBUTED IN THE CLASS .
Load more

Recommended publications
  • CHAPTER 6 PICTORIAL SKETCHING 6-1Four Types of Projections
    CHAPTER 6 PICTORIAL SKETCHING 6-1Four Types of Projections Types of Projections 6-2 Axonometric Projection As shown in figure below, axonometric projections are classified as isometric projection (all axes equally foreshortened), dimetric projection (two axes equally shortened), and trimetric projection (all three axes foreshortened differently, requiring different scales for each axis). (cont) Figures below show the contrast between an isometric sketch (i.e., drawing) and an isometric projection. The isometric projection is about 25% larger than the isometric projection, but the pictorial value is obviously the same. When you create isometric sketches, you do not always have to make accurate measurements locating each point in the sketch exactly. Instead, keep your sketch in proportion. Isometric pictorials are great for showing piping layouts and structural designs. Step by Step 6.1. Isometric Sketching 6-4 Normal and Inclined Surfaces in Isometric View Making an isometric sketch of an object having normal surfaces is shown in figure below. Notice that all measurements are made parallel to the main edges of the enclosing box – that is, parallel to the isometric axes. (cont) Making an isometric sketch of an object that has inclined surfaces (and oblique edges) is shown below. Notice that inclined surfaces are located by offset, or coordinate measurements along the isometric lines. For example, distances E and F are used to locate the inclined surface M, and distances A and B are used to locate surface N. 6-5 Oblique Surfaces in Isometric View Oblique surfaces in isometric view may be drawn by finding the intersections of the oblique surfaces with isometric planes.
    [Show full text]
  • Alvar Aalto's Associative Geometries
    Alvar Aalto Researchers’ Network Seminar – Why Aalto? 9-10 June 2017, Jyväskylä, Finland Alvar Aalto’s associative geometries Holger Hoffmann Prof. Dipl.-Ing., Architekt BDA Fay Jones School of Architecture and Design Why Aalto?, 3rd Alvar Aalto Researchers Network Seminar, Jyväskylä 2017 Prof. Holger Hoffmann, Bergische Universität Wuppertal, April 30th, 2017 Paper Proposal ALVAR AALTO‘S ASSOCIATIVE GEOMETRIES This paper, written from a practitioner’s point of view, aims at describing Alvar Aalto’s use of associative geometries as an inspiration for contemporary computational design techniques and his potential influence on a place-specific version of today’s digital modernism. In architecture the introduction of digital design and communication techniques during the 1990s has established a global discourse on complexity and the relation between the universal and the specific. And however the great potential of computer technology lies in the differentiation and specification of architectural solutions, ‘place’ and especially ‘place-form’ has not been of greatest interest since. Therefore I will try to build a narrative that describes the possibilities of Aalto’s “elastic standardization” as a method of well-structured differentiation in relation to historical and contemporary methods of constructing complexity. I will then use a brief geometrical analysis of Aalto’s “Neue Vahr”-building to hint at a potential relation of his work to the concept of ‘difference and repetition’ that is one of the cornerstones of contemporary ‘parametric design’. With the help of two projects (one academic, one professional) I will furthermore try to show the capability of such an approach to open the merely generic formal vocabulary of so-called “parametricism” to contextual or regional necessities in a ‘beyond-digital’ way.
    [Show full text]
  • The Three-Dimensional User Interface
    32 The Three-Dimensional User Interface Hou Wenjun Beijing University of Posts and Telecommunications China 1. Introduction This chapter introduced the three-dimensional user interface (3D UI). With the emergence of Virtual Environment (VE), augmented reality, pervasive computing, and other "desktop disengage" technology, 3D UI is constantly exploiting an important area. However, for most users, the 3D UI based on desktop is still a part that can not be ignored. This chapter interprets what is 3D UI, the importance of 3D UI and analyses some 3D UI application. At the same time, according to human-computer interaction strategy and research methods and conclusions of WIMP, it focus on desktop 3D UI, sums up some design principles of 3D UI. From the principle of spatial perception of people, spatial cognition, this chapter explained the depth clues and other theoretical knowledge, and introduced Hierarchical Semantic model of “UE”, Scenario-based User Behavior Model and Screen Layout for Information Minimization which can instruct the design and development of 3D UI. This chapter focuses on basic elements of 3D Interaction Behavior: Manipulation, Navigation, and System Control. It described in 3D UI, how to use manipulate the virtual objects effectively by using Manipulation which is the most fundamental task, how to reduce the user's cognitive load and enhance the user's space knowledge in use of exploration technology by using navigation, and how to issue an order and how to request the system for the implementation of a specific function and how to change the system status or change the interactive pattern by using System Control.
    [Show full text]
  • 189 09 Aju 03 Bryon 8/1/10 07:25 Página 31
    189_09 aju 03 Bryon 8/1/10 07:25 Página 31 Measuring the qualities of Choisy’s oblique and axonometric projections Hilary Bryon Auguste Choisy is renowned for his «axonometric» representations, particularly those illustrating his Histoire de l’architecture (1899). Yet, «axonometric» is a misnomer if uniformly applied to describe Choisy’s pictorial parallel projections. The nomenclature of parallel projection is often ambiguous and confusing. Yet, the actual history of parallel projection reveals a drawing system delineated by oblique and axonometric projections which relate to inherent spatial differences. By clarifying the intrinsic demarcations between these two forms of parallel pro- jection, one can discern that Choisy not only used the two spatial classes of pictor- ial parallel projection, the oblique and the orthographic axonometric, but in fact manipulated their inherent differences to communicate his theory of architecture. Parallel projection is a form of pictorial representation in which the projectors are parallel. Unlike perspective projection, in which the projectors meet at a fixed point in space, parallel projectors are said to meet at infinity. Oblique and axonometric projections are differentiated by the directions of their parallel pro- jectors. Oblique projection is delineated by projectors oblique to the plane of pro- jection, whereas the orthographic axonometric projection is defined by projectors perpendicular to the plane of projection. Axonometric projection is differentiated relative to its angles of rotation to the picture plane. When all three axes are ro- tated so that each is equally inclined to the plane of projection, the axonometric projection is isometric; all three axes are foreshortened and scaled equally.
    [Show full text]
  • Smart Sketch System for 3D Reconstruction Based Modeling
    Smart Sketch System for 3D Reconstruction Based Modeling Ferran Naya1, Julián Conesa2, Manuel Contero1, Pedro Company3, Joaquim Jorge4 1 DEGI - ETSII, Universidad Politécnica de Valencia, Camino de Vera s/n, 46022 Valencia, Spain {fernasan, mcontero}@degi.upv.es 2 DEG, Universidad Politécnica de Cartagena, C/ Dr. Fleming 30202 Cartagena, Spain [email protected] 3 Departamento de Tecnología, Universitat Jaume I de Castellón, Campus Riu Sec 12071 Castellón, Spain [email protected] 4 Engª. Informática, IST, Av.Rovisco Pais 1049-001 Lisboa, Portugal [email protected] Abstract. Current user interfaces of CAD systems are still not suited to the ini- tial stages of product development, where freehand drawings are used by engi- neers and designers to express their visual thinking. In order to exploit these sketching skills, we present a sketch based modeling system, which provides a reduced instruction set calligraphic interface to create orthogonal polyhedra, and an extension of them we named quasi-normalons. Our system allows users to draw lines on free-hand axonometric-like drawings, which are automatically tidied and beautified. These line drawings are then converted into a three- dimensional model in real time because we implemented a fast reconstruction process, suited for quasi-normalon objects and so-called axonometric inflation method, providing in this way an innovative integrated 2D sketching and 3D view visualization work environment. 1 Introduction User interfaces of most CAD applications are based on the WIMP (Windows, Icons, Menus and Pointing) paradigm, that is not enough flexible to support sketching activi- ties in the conceptual design phase. Recently, work on sketch-based modeling has looked at a paradigm shift to change the way geometric modeling applications are built, in order to focus on user-centric systems rather than systems that are organized around the details of geometry representation.
    [Show full text]
  • 2D to 3D Image Conversion Using Trimetric Projection and Depth-Map Estimation
    ISSN (Online) 2278-1021 IJARCCE ISSN (Print) 2319 5940 International Journal of Advanced Research in Computer and Communication Engineering ISO 3297:2007 Certified Vol. 5, Issue 7, July 2016 2D to 3D Image Conversion using Trimetric Projection and Depth-map Estimation Rashmi Snawer1, Asst. Prof. Ms. Anubhooti Papola2 Department of Computer Science, Uttarakhand Technical University Dehradun1, 2 Abstract: The three-dimensional (3D) displays needed the axes and angle information for dimensional view which is engaged in the predictable 2D substance. This work presents a novel methodology that involuntarily converts 2D images into 3D which is easily available for users with the help of our mM desktop application. Here we are working on axonometric projection and focusing on axis of any object or image, in this methodology we are going to merge three different axonometric projections and showing this as a new technique in Tri-metric projection. Projection applies in 2D records which we have to convert in 3D. This technique is helpful in 2d to 3D conversion with a better view and it takes less time for conversion since researchers are using three different projection techniques together for an exceptional result. Keywords: Predictable 2D substance, focusing on axis of any object or image, 2D records which we have to convert in 3D help of our mM desktop application 1. INTRODUCTION In the 2D structure, we use only two coordinates X and Y it an idea of the outer world, how objects are near or how other than in 3D an extra coordinate Z is new. 3D graphics they are far.
    [Show full text]
  • Download Download
    O'SHAUNGHNESSY | The 1866 Vercoe and Harding map and the axonometric: the object of subjective representation AHA: Architectural History Aotearoa (2010) vol 7:58-65 The 1866 Vercoe and Harding map and the axonometric: the object of subjective representation Katherine O'Shaunghnessy ABSTRACT: The 1866 Vercoe and Harding map of Auckland provides a visual description of colonial development during the 1860s. This map is a static representation of the past and the backdrop to an exploration of the site via architectural drawing. This paper outlines the process of excavating a site through axonometric drawing looking specifically at an area within Freemans Bay. It explains how the two dimensional Vercoe and Harding map has been extruded into a three dimensional representation of the site. The idea of the map as a subjective representation of the past will be explored alongside the use of what might be considered an objective drawing type to create a subjective visualization of the site. The paper will investigate the process of creating this axonometric and the way in which this drawing relies on both historical fact and historical assumption. It will address how this process produces an understanding of the site, namely, the ability to translate each building based on the simple outline of its plan. This paper is part of a wider investigation into the documentation of heritage sites and the use of drawing to create an understanding of place. Thus, this drawing alone does not create this awareness of place, but rather, informs a new understanding of the 1866 map and a representation of what Freemans Bay might have been during the 1860s.
    [Show full text]
  • A Brief History of Data Visualization
    A Brief History of Data Visualization Michael Friendly Psychology Department and Statistical Consulting Service York University 4700 Keele Street, Toronto, ON, Canada M3J 1P3 in: Handbook of Computational Statistics: Data Visualization. See also BIBTEX entry below. BIBTEX: @InCollection{Friendly:06:hbook, author = {M. Friendly}, title = {A Brief History of Data Visualization}, year = {2006}, publisher = {Springer-Verlag}, address = {Heidelberg}, booktitle = {Handbook of Computational Statistics: Data Visualization}, volume = {III}, editor = {C. Chen and W. H\"ardle and A Unwin}, pages = {???--???}, note = {(In press)}, } © copyright by the author(s) document created on: March 21, 2006 created from file: hbook.tex cover page automatically created with CoverPage.sty (available at your favourite CTAN mirror) A brief history of data visualization Michael Friendly∗ March 21, 2006 Abstract It is common to think of statistical graphics and data visualization as relatively modern developments in statistics. In fact, the graphic representation of quantitative information has deep roots. These roots reach into the histories of the earliest map-making and visual depiction, and later into thematic cartography, statistics and statistical graphics, medicine, and other fields. Along the way, developments in technologies (printing, reproduction) mathematical theory and practice, and empirical observation and recording, enabled the wider use of graphics and new advances in form and content. This chapter provides an overview of the intellectual history of data visualization from medieval to modern times, describing and illustrating some significant advances along the way. It is based on a project, called the Milestones Project, to collect, catalog and document in one place the important developments in a wide range of areas and fields that led to mod- ern data visualization.
    [Show full text]
  • Engineering Drawing
    LECTURE NOTES For Environmental Health Science Students Engineering Drawing Wuttet Taffesse, Laikemariam Kassa Haramaya University In collaboration with the Ethiopia Public Health Training Initiative, The Carter Center, the Ethiopia Ministry of Health, and the Ethiopia Ministry of Education 2005 Funded under USAID Cooperative Agreement No. 663-A-00-00-0358-00. Produced in collaboration with the Ethiopia Public Health Training Initiative, The Carter Center, the Ethiopia Ministry of Health, and the Ethiopia Ministry of Education. Important Guidelines for Printing and Photocopying Limited permission is granted free of charge to print or photocopy all pages of this publication for educational, not-for-profit use by health care workers, students or faculty. All copies must retain all author credits and copyright notices included in the original document. Under no circumstances is it permissible to sell or distribute on a commercial basis, or to claim authorship of, copies of material reproduced from this publication. ©2005 by Wuttet Taffesse, Laikemariam Kassa All rights reserved. Except as expressly provided above, no part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying, recording, or by any information storage and retrieval system, without written permission of the author or authors. This material is intended for educational use only by practicing health care workers or students and faculty in a health care field. PREFACE The problem faced today in the learning and teaching of engineering drawing for Environmental Health Sciences students in universities, colleges, health institutions, training of health center emanates primarily from the unavailability of text books that focus on the needs and scope of Ethiopian environmental students.
    [Show full text]
  • Lehigh Preserve Institutional Repository
    Lehigh Preserve Institutional Repository The feasibility of an enhancement of Geometric Design Processor (GDP) to include dimensioning / Glemser, Raymond Gerald 1985 Find more at https://preserve.lib.lehigh.edu/ This document is brought to you for free and open access by Lehigh Preserve. It has been accepted for inclusion by an authorized administrator of Lehigh Preserve. For more information, please contact [email protected]. THE FEASIBILITY OF AN ENHANCEMENT OF GEOMETRIC DESIGN PROCESSOR {GDP) TO INCLUDE DIMENSIONING · by Raymond Gerald Glemser A Thesis Presented to the Graduate committee of Lehigh University in canaidacy for Degree of ~aster of science in Industrial Engineering Lehigh University 1984 Certificate of Approval This thesis is accepted and approved in partial fulfillment·. of the requirements for the degree of Master of Science.: --~--1;-~?!f::._~i)°(ie _At~~----- _Chairman of Department ii Acknowledgements I wish to thank Dr. Emory w. Zimrners, Jr. 0£ Lehigh Uni­ versity, my thesis advisor, for providing me with the direc­ tion and resources necessary for this design. I extend many thanks to Bill Fitzgerald, Bob Wolfe, and Franklyn Gracer for their continuing interest in and suggestions concerning the integration of dimensioning with the existing GDP sys­ tem. I express a special thanks to Adel Ali of Lehigh Uni­ versity for his contributions to our dimensioning and tolerancinq discussions, and to carol Riggin £or her pio­ neering GDP research at Lehigh. I dedicate this thesis to my parents £or their encourage­ ment throughout my years at Lehigh University. iii TABLE_OF CONTENTS ABSTRACT . 1 Background • . .. , . 4 Projections 4 Current GDP Vie'l Capabilities .
    [Show full text]
  • 1. Introduction
    INTERNATIONAL CONFERENCE ON ENGINEERING DESIGN ICED 03 STOCKHOLM, AUGUST 19-21, 2003 CONCEPTUAL MODELING TOOL AT THE EARLY DESIGN PHASE Ferran Naya, Manuel Contero, Joaquim Jorge, Julián Conesa Abstract Although CAD systems have evolved considerably in functionality, expressiveness and modeling power over the last decades, their user interfaces are still tied to legacy principles and are not suited to the initial stages of product development. They exhibit steep learning curves, cumbersome and overly structured dialogues, including hundreds of commands. While much of this functionality may be required by the sheer complexity of the tasks these systems are designed to help, we believe the user interface could benefit from simpler paradigms based on sketching and drawing to reduce unneeded complexity, especially in the conceptual design phase. In what follows, we present the CIGRO system that provides a reduced instruction set calligraphic interface to create polyhedral objects using an incremental drawing paradigm evocative of paper and pencil drawings. Users sketch lines on an axonometric projection, which are automatically beautified and connected to existing parts of the drawing. Such line drawings are then converted to a three-dimensional model through a reconstruction process guided by an axonometric inflation method. While much work remains to be done, comparative usability evaluation tests conducted with expert and new users yielded very promising results. Keywords: computer-aided design, engineering drawing, geometric modeling, solid modeling 1. Introduction In spite of recent advances in Computer Aided Design, it is still difficult to capture the drawing language used in the initial phases of product development, where designers prefer pencil and paper over computer-based tools.
    [Show full text]
  • Summary Orthographic Projection: Projectors Orthog
    Projections Perspective projection n Projecting: mapping from 3D viewing coordinates to 2D coordinates in projection plane. In homogeneous coordinates it is a map from 4D viewing coordinates to 3D. n Projections n Parallel: orthogonal and oblique n Perspective n Canonical views: orthographic and perspective projections Projectors intersect at COP Viewing, projections Hofstra University 16 Viewing, projections Hofstra University 17 Parallel Projections Parallel projections: summary n Center of projection is at infinity. n Projectors are parallel. n Parallel lines stay parallel n There is no forshorthening n Distances and angles are transformed consistently n Used most often in engineering design, CAD systems. Used for top and side drawings from Projectors parallel. which measurements could be made. COP at infinity. Viewing, projections Hofstra University 18 Viewing, projections Hofstra University 19 Orthographic Projection: projectors orthogonal to projection plane Orthographic Projections same for all points DOP (direction of projectors) DOP is perpendicular to the view plane Viewing, projections Hofstra University 20 Viewing, projections Hofstra University 21 1 Multiview Parallel Projection Isometric Projection Projector makes equal angles with all three principal axes Faces are parallel to the projection plane All three axes are equally foreshortened Viewing, projections Hofstra University 22 Viewing, projections Hofstra University 23 Oblique Parallel Projections Mechanical Drawing n Most general parallel views n Projectors make an arbitrary angle with the projection plane n Angles in planes parallel to the projection plane are preserved isometric Viewing, projections Hofstra University 24 Viewing, projections Hofstra University 25 Oblique Projections: projectors are not Perspective Projection orthogonal to image plane n Most natural for people Cavalier n In human vision, perspective projection of the world is Angle between projectors and projection plane is 45°.
    [Show full text]