Wall Panel Mounting Systems Architectural Metals

www.monarchmetal.com (631) 750-3000

Wall Panel Mounting Systems

Architectural Metals

Monarch Metal 1625 Sycamore Ave Bohemia, New York 11716 (631) 750 3000 [email protected] www.monarchmetal.com/products/easy-wall-panel-system www.monarchmetal.com/products/easy-wall-panel-systemWALL PANEL SYSTEMS Four Different Looks for Reveals www.monarchmetal.com/products/easy-wall-panel-system(Page 19)

www.monarchmetal.com/products/stainless-steel-wall-panel-system-250 Stainless NEW PRODUCT www.monarchmetal.com/products/stainless-steel-wall-panel-systemWall Panel -250 www.monarchmetal.com/products/stainless-steel-wall-panel-systemSystems -250 www.monarchmetal.com/products/stainless-steel-wall-panel-system(Page 25) -250

http://www.monarchmetal.com/products/stainless-sharp-corner-angSharp Corner le/ http://www.monarchmetal.com/products/stainless-sharp-corner-angStainless Steel le/ NEW PRODUCT http://www.monarchmetal.com/products/stainless-sharp-corner-angProﬁles le/ http://www.monarchmetal.com/products/stainless-sharp-corner-ang(Page 54) le/

Monarch Metal Fabrication • 1625 Sycamore Ave, Bohemia, New York 11716 • United States of America (631) 750-3000 • (631) 563-8976 • [email protected] • www.monarchmetal.com CONTENTS

www.monarchmetal.com/products/hanging-systems/05 Monarch Z Clip http://www.monarchmetal.com/products/aluminum-angle-architectural-metals-and-structural-pro les/45 Architectural Metals

www.monarchmetal.com/products/hanging-systems/ Panel Hanging Systems 46 • Angle: Aluminum, Stainless Steel, Steel www.monarchmetal.com/products/easy-wall-panel-system/19 Wall Panel Systems 53 • Anodized Aluminum : www.monarchmetal.com/products/easy-wall-panel-system/20 • Monarch Easy Panel System Angle, Structural Shapes 25 • Stainless System 55 • Channel : Aluminum, 28 • Glass Panel System Stainless Steel, Steel 61 • Flat Bar: Aluminum,

www.monarchmetal.com/products/standoffs/31 Standoffs Stainless Steel and Brass 33www.monarchmetal.com/products/standoffs/ • Aluminum Standoffs 66 • Diamond-Tread Plates

www.monarchmetal.com/products/standoffs/34 • Stainless Standoffs 68 • Other Structurals: T Bar, Zees

39 Rainscreen Cladding www.monarchmetal.com/products/corner-guards/73 Corner Guards & Kick Plates

42http://www.monarchmetal.com/products/trespa-ts-110-exposed-fastener-system/ • Exposed Fastener System www.monarchmetal.com/products/corner-guards/74 • Corner Guards 43http://www.monarchmetal.com/products/trespa-ts-210-concealed-fastener-system/ • Concealed Fastener System 75 • Kick Plates

Architectural Metals

www.monarchmetal.com/products/hanging-systems www.monarchmetal.com/products/hanging-systems www.monarchmetal.com/products/hanging-systems MONARCHwww.monarchmetal.com/products/hanging-systems Z CLIP www.monarchmetal.com/products/hanging-systems www.monarchmetal.com/products/hanging-systems www.monarchmetal.com/products/hanging-systems HANGINGwww.monarchmetal.com/products/hanging-systems SYSTEMS

Overview ...... 06

Choosing the Correct Monarch Hanging System ...... 08

Standard Monarch Clips ...... 09

Stainless Steel Monarch Clips ...... 15 MONARCHwww.monarchmetal.com/products/hanging-systems Z CLIPS Overview

Monarch Metal has provided the fastest and easiest method to mount wall panels, signs, art work and more for close to 25 years.

The key advantages of the Monarch Z Clip system are:

• Simplicity of installation • Strength and security of the mounting • No visible screws or nails on the surface of the mounted panel

- 06 - www.monarchmetal.com (631)750-3000 www.monarchmetal.com/products/hanging-systemsMONARCH Z CLIPS Overview

DIM 4” For a typical 8’ high x 4’ wide panel, any dim customers mount the continuous lengths along the wall at 3 different heights paral- lel with the ﬂoor. These are secured to studs at 16” on center or to blocking at 8” on center. The shorter panel clips are secured to the back of the panel every 12-15” horizontally.

To match fastener locations on the panel with those on the wall a single template can be used or one can use a story pole. 2 EQUAL DIM

Installation of the panel is accomplished by simply dropping the panel onto the continuous lengths mounted along the wall. DIM 4” plus 1 7/8” For a video of an installation, please visit our web-site at MonarchMetal.com

.125”

Monarch recommends a #8 Pan Head thread screw for attaching the shorter panel clips to the back side of MDF or particle board panels, and stocks these in 1/2”, 5/8” and 3/4” lengths.

The important constraint to remember for using the Monarch Z Clip system is that the height of the head of the screw must be less than .125” for our standard Monarch Z Clips.

- 07 - www.monarchmetal.com (631)750-3000 MONARCHwww.monarchmetal.com/z-clip-selector-tools/ Z CLIPS Choosingwww.monarchmetal.com/z-clip-selector-tools/ the Correct Monarch Hanging System

MFTAPE 3/8” Lift Off Are you hanging GLASS / .293” Projection (i) a conventional SPECIALITY panel, OR (ii) a glass, HPL Phenolic, acrylic or aluminum1 ACM panel? CONVENTIONAL

STANDARD Do you need STRENGTH a high strength system? MF625 MF250 MF375 5/8” Lift Off 1/4” Lift Off 3/8” Lift Off 2 3/16” Projection 1/4” Projection 1/4” Projection

HIGH STRENGTH

HIGH Do you need a STRENGTH corrosion resistant system? MFSTR-050 MFSTR-1125 7/16” Lift Off 5/8” Lift Off 3 1/2” Projection 1 1/8” Projection

HIGH STRENGTH / CORROSION RESISTANT

MFSS-CHAN MFSS-HD 3/4” Lift Off 3/4” Lift Off 1” Projection 1/4” Projection

- 08 - www.monarchmetal.com (631)750-3000 MONARCH Z CLIPS Standard Z Clips

www.monarchmetal.com/products/mf375-z-clips/MF375 Clip Standard Applications Features: 3/8” Lift O 1/4” Projection • Monarch Z Clip system for hanging interior panels where the installer desires a 3/8” length of engagement 1 • 1/2” clearance required between the top of the panel and the ceiling • 6063-T6 Aluminum 1 MF375 Clip

1/4 Projection MF375 Material Aluminum Stock Clip Size 2 Inch Stock Continuous Length 72 Inch, 144 Inch Custom Lengths Available Any MONARCH Lift Off (1) 3/8 Inch Projection (2) 1/4 Inch Availability Same Day Shipping 3/8 Lift off 2” Length

(1) The “Lift-Off” is the amount you need to raise the panel over its resting height to mount the panel. (2) The “Projection” is the distance that the panel sits out from the wall.

- 09 - www.monarchmetal.com (631)750-3000 MONARCH Z CLIPS Speciality Z Clips

www.monarchmetal.com/products/mf375-z-clips/MF375 Even Clip Alternative Clip for MF375 Features: 3/8” Lift O 1/4” Projection • In line holes for 50% increase in panel processing speed • 32mm hole spacing for line boring equipment 1/4 Projection • 6063-T6 Aluminum

Specialty Clip with In-Line Holes MONARCH

3/8 Lift off 2” Length

MF375 Material Aluminum Stock Clip Size 2 Inch Stock Continuous Length 72 Inch, 144 Inch Custom Lengths Available Any Lift Off (1) 3/8 Inch Projection (2) 1/4 Inch Availability Same Day Shipping

(1) The “Lift-Off” is the amount you need to raise the panel over its resting height to mount the panel. (2) The “Projection” is the distance that the panel sits out from the wall.

- 10 - www.monarchmetal.com (631)750-3000 MONARCH Z CLIPS Standard Z Clips www.monarchmetal.com/products/mf625-clip/MF625 Clip Standard Applications Features: 5/8” Lift O 3/16” Projection • Monarch Z Clip system for hanging interior panels where the installer desires a 5/8” length of engagement 1 • 3/4” clearance required between the top of the panel and the ceiling • 6063-T6 Aluminum 1 MF625 Clip

.200” Projection MF625 Material Aluminum Stock Clip Size 1 1/2 Inch Stock Continuous Length 72 Inch, 144 Inch Custom Lengths Available Any Lift Off (1) 5/8 Inch Projection (2) 3/16 Inch MONARCH Availability Same Day Shipping

(1) The “Lift-Off” is the amount you need to raise the panel over its resting height to mount the panel. (2) The “Projection” is the distance that the panel sits out from the wall. 5/8 Lift off 1 1/2” Length

- 11 - www.monarchmetal.com (631)750-3000 MONARCH Z CLIPS Standard Z Clips www.monarchmetal.com/products/mf250-z-clips/MF250 Clip Applications With Limited Clearance Features: Above Panel 1/4” Lift O • Monarch Z Clip system for hanging 1/4” Projection interior panels where the installer desires a 1/4” length of engagement 1 • 3/8” clearance required between the top of the panel and the ceiling • 6063-T6 Aluminum 1 MF250 Clip

1/4 Projection MF250 Material Aluminum Stock Clip Size 2 Inch Stock Continuous Length 72 Inch, 144 Inch Custom Lengths Available Any Lift Off (1) 1/4 Inch MONARCH Projection (2) 1/4 Inch Availability Same Day Shipping

1/4 Lift off 2” Length (1) The “Lift-Off” is the amount you need to raise the panel over its resting height to mount the panel. (2) The “Projection” is the distance that the panel sits out from the wall.

- 12 - www.monarchmetal.com (631)750-3000 MONARCH Z CLIPS Standard Z Clips

www.monarchmetal.com/products/structural-heavy-duty-aluminum-panel-hanging-system/ www.monarchmetal.com/products/structural-heavy-duty-aluminum-panel-hanging-system/ www.monarchmetal.com/products/structural-heavy-duty-aluminum-paMFSTR-050 Clipnel-hanging-system/ 1 High Strength Applications Features: 7/16” Lift O 1/2” Projection • High strength aluminum system compatible with up to a 3/8’’ hex bolt • 1/2” clearance required between the top of the panel and the ceiling • 6063-T6 Aluminum • Easily used for mounting on concrete block or other difﬁcult materials 2

1 MFSTR-050 2 MFSTR-050 2” Clip Continuous Length

Ø.250 THRU x2

MFSTR050 Material Aluminum Stock Clip Size 2 Inch Stock Continuous Length 72 Inch, 144 Inch Custom Lengths Available Any 2.000 Lift Off (1) 7/16 Inch (Available in lengths up to 144”) Projection (2) 1/2 Inch Availability Same Day Shipping .437

(1) The “Lift-Off” is the amount you need to raise the panel 1.500 over its resting height to mount the panel. (2) The “Projection” is the distance that the panel sits out from the wall.

.125 .500

- 13 - www.monarchmetal.com (631)750-3000 MONARCH Z CLIPS Standard Z Clips

www.monarchmetal.com/products/mfstr-1125/MFSTR-1125 Clip 1 Cladding 2 Applications Features: 5/8” Lift O 1 1/8” Projection • Heavy duty adjustable height system for mounting curtain wall in exterior applications • Easy adjust bolt on clips for minor height adjustments • Easy ﬁt engagement for locating • 3/4” clearance required above the panel • 6063-T6 Aluminum • Compatible with heavy duty hex bolts up to 3/8” for additional strength • Perfect for mounting on concrete block or other difﬁcult materials 1 1/4” x 20 Hex Bolt 2 MFSTR-1125 for Minor Height System Adjustments

Ø.250 THRU MFSTR-1125 Material Aluminum Stock Clip Size 1.5 Inch Stock Continuous Length 144 Inch

Custom Lengths Available Any 2.625 Lift Off (1) 5/8 Inch 2.000 Projection (2) 1 1/8 Inch 1.49 Availability Same Day Shipping

.750 (1) The “Lift-Off” is the amount you need to raise the panel 1.125 over its resting height to mount the panel. 1.500 (2) The “Projection” is the distance that the panel sits out (Available in lengths up to 144”) from the wall.

- 14 - www.monarchmetal.com (631)750-3000 MONARCH Z CLIPS Stainless Steel Hidden Fastening Systems

www.monarchmetal.com/products/structural-heavy-duty-stainless-panel-hanging-system/ www.monarchmetal.com/products/structural-heavy-duty-stainless-pHeavy Duty anel-hanging-system/ www.monarchmetal.com/products/structural-heavy-duty-stainless-panel-hanging-system/ www.monarchmetal.com/products/structural-heavy-duty-stainless-panel-hanging-system/ www.monarchmetal.com/products/structural-heavy-duty-stainless-panel-hanging-system/ www.monarchmetal.com/products/structural-heavy-duty-stainless-pStainless Steel Clipsanel-hanging-system/ High Strength 1 Corrosion Resistant Features: Applications 3/4” Lift O • High strength, corrosion resistant 1/4” Projection stainless steel material makes these perfect for use in exterior wet or harsh environments • 7/8” clearance required between the top of the panel and the ceiling 1 Heavy Duty • Available in 304 Stainless Steel and MFSS Clip 316 Marine Grade Stainless Steel • Same simple engagement mechanism as our original Monarch Clips

1/4” Projection MFSS HD Clips Material Stainless Steel Stock Clip Size 1 1/2 Inch Stock Continuous Length 48 Inch Custom Lengths Available Any Lift Off (1) 3/4 Inch Projection (2) 1/4 Inch MONARCH Availability Same Day Shipping

(1) The “Lift-Off” is the amount you need to raise the panel over its resting height to mount the panel. (2) The “Projection” is the distance that the panel sits out 3/4” Lift off from the wall. 1 1/2” Length

- 15 - www.monarchmetal.com (631)750-3000 MONARCH Z CLIPS Stainless Steel Hidden Fastening Systems

www.monarchmetal.com/products/stainless-building-envelope-panelStainless Steel System-hanging-system/ www.monarchmetal.com/products/stainless-building-envelope-panel-hanging-system/

www.monarchmetal.com/products/stainless-building-envelope-panel-hanging-system/ with 1” Projection High Strength Corrosion Resistant Features: Applications 3/4” Lift O 1” Projection • High strength, corrosion resistant 1 stainless steel material compatible with up to a 3/8” hex bolt • 7/8” clearance required between the top of the panel and the ceiling • 304 Stainless steel • 1” projection for building envelope 2 applications

1 MFSSCHAN 2 MFSSCHAN Bracket

MFSSCHAN Material Stainless Steel .75 Stock Clip Size 3 1/2 Inch Stock Continuous Length 48 Inch Custom Lengths Available Any Lift Off (1) 3/4 Inch 1.00 Projection (2) 1 Inch Availability Same Day Shipping .063

(1) The “Lift-Off” is the amount you need to raise the panel over its resting height to mount the panel. (2) The “Projection” is the distance that the panel sits out 1.00 from the wall.

- 16 - www.monarchmetal.com (631)750-3000 MONARCH Z CLIPS Hidden Fastening System with 3M High Strength Tape www.monarchmetal.com/products/phenolic-glass-glazing-panel-hangMFTAPE ing-system/ Features: For Glass, 1 HPL & ACM Panels • Easily used for mounting phenolic, 3/8” Lift O ACM, aluminum and glass panels 1/4” Projection • Each 1 ft of clip is rated for 7.5 pounds of shear strength using a 5x factor • Suitable for interior and exterior 0.063” applications (examples in 3M design Thick Tape guide)

• 1/2” clearance required between 1 MFTAPE The top of the panel and the ceiling Bracket • 6063-T6 aluminum 2 MF375 Clip • (2) strips of 3M VHB architectural panel tape pre-applied for peel and stick 2 application 5 mm • Pairs with MF375 clip for material savings Panel • Redesign of clip to optimize adhesion with tapes • Clip can also be purchased without The 3M tape for use with your preferred vendor of glazing tape

.250

.375 MFTAPE MONARCH Material Aluminum Stock Clip Size 2 Inch 1.260 Stock Continuous Length 72 Inch, 144 Inch 3.375 Custom Lengths Available Any Lift Off (1) 3/8 Inch Projection (2) .293 Inch

Availability Same Day Shipping 1.260

(1) The “Lift-Off” is the amount you need to raise the panel over its resting height to mount the panel. (2) The “Projection” is the distance that the panel sits out Available in Stock Length of 144” from the wall. or Cut to Size

- 17 - www.monarchmetal.com (631)750-3000 Edge Trim

Panel Clips

Horizontal Reveal

Wall Panel

Blocking

Wallboard

Stud www.monarchmetal.com/products/easy-panel-system www.monarchmetal.com/products/easy-panel-systemMONARCH EASY www.monarchmetal.com/products/easy-panel-system WALLwww.monarchmetal.com/products/easy-panel-system PANEL SYSTEM

System Features ...... 20 PATENT PENDING Reveal Options ...... 22

Corner & Perimeter Trim Options ...... 24

Stainless Wall Panel System ...... 25

Glass Wall Panel System ...... 28 www.monarchmetal.com/products/easy-wall-panel-systemMONARCH EASY WALL PANEL SYSTEM Easy Wall Panel System Features

Ceiling 1 Fast & simple installation centered around the intuitive Monarch Z Clip System Top 2 PATENT PENDING Edge Four different looks 1 Trim for reveals in stock • Aluminum decorative trim for wall panel Panel Fastener installations 3/16" Shim • Purchase the aluminum NARROW trim separately from the panels

• 4 different choices for 1/16" vertical and horizontal Panel RECESSED reveals

• Standard clear anodized 3 aluminum ﬁnish Wall 3/8" Fastener • Fast and easy shipment NARROW CHANNEL 2 to meet project Horizontal deadlines Reveal 1" MF375 Clip WIDE CHANNEL

3 Option for Horizontal Reveals & Edge Trim to be punched with slotted holes for adjusting into place after mounting. Metal Stud

Bottom Edge Trim

Base

Wall

www.monarchmetal.com - 20 - (631)750-3000 www.monarchmetal.com/products/easy-wall-panel-systemMONARCH EASY WALL PANEL SYSTEM Easy Wall Panel System Features

Step 1: Choose a Horizontal Reveal

Narrow Recessed Narrow Wide (EPS-H075-N) (EPS-H075-R) Channel Channel (EPS-H075-NC) (EPS-H075-WC)

Step 2: Choose a Vertical Reveal

Narrow Recessed Narrow Wide (EPS-V075-N) (EPS-V075-R) Channel Channel (EPS-V075-NC) (EPS-V075-WC)

Step 3: Choose an Edge Trim and Any Needed Corners

Outside Top Edge Trim Corner Vertical Plan/Elevation View Horizontal Edge Reveal Trim Edge Trim

Vertical Reveal Outside Vertical Edge Corner Trim Reveals

Bottom Edge Trim

www.monarchmetal.com - 21 - (631)750-3000 www.monarchmetal.com/products/easy-wall-panel-systemMONARCH EASY WALL PANEL SYSTEM Reveal Options

Horizontal Reveal Options Narrow (EPS-H075-N)

3/16”

MF375 Recessed Clip (EPS-H075-R)

3/4” Panel

Wall 1/16”

MF375 Narrow Channel Clip (EPS-H075-NC)

3/4” Panel

Wall 3/8”

MF375 Wide Channel Clip (EPS-H075-WC) 3/4” Panel

Wall 1”

www.monarchmetal.com - 22 - (631)750-3000 MONARCHwww.monarchmetal.com/products/easy-wall-panel-system EASY WALL PANEL SYSTEM Reveal Options

Vertical Reveal Options

3/4” Narrow Panel (EPS-V075-N)

3/16”

Wall

3/4” Recessed Panel (EPS-V075-R)

1/16”

Wall

Narrow Channel 3/4” (EPS-V075-NC) Panel

3/8”

Wall

3/4” Wide Channel Panel (EPS-V075-WC)

1”

Wall

- 23 - www.monarchmetal.com (631)750-3000 MONARCHwww.monarchmetal.com/products/easy-wall-panel-system EASY WALL PANEL SYSTEM Corner & Perimeter Trim Options

Edgewww.monarchmetal.com/products/easy-wall-panel-system Trim, Inside Corners & Outside Corners

Plan/Elevation View Edge Trim & Inside Corner (EPS-ET075-N)

Edge Trim

Outside Vertical Edge Corner Trim Reveals

Outside Top Edge Corner Trim

Vertical Horizontal Edge Outside Corner Reveal Trim (EPS-OC075-N)

Vertical Reveal

Bottom Edge Trim

- 24 - www.monarchmetal.com (631)750-3000 WALL PANEL SYSTEMS Stainlesswww.monarchmetal.com/products/stainless-steel-wall-panel-system Steel Wall Panel System -250

1/4”www.monarchmetal.com/products/stainless-steel-wall-panel-system Exposed Stainless System -250

Features:

• Exposed 1/4” reveals

• Brushed, mirror & dull ﬁnishes available

• Fabricated from 18 ga. stainless steel

• Installation with standard Monarch Z Clips permits easy panel removal for repair

• Requires a 3/8” gap between the panel and the reveal (less with slotted holes)

.25” .375”

The trim is notched to create a near seamless intersection

The brushed stainless perimeter is installed The panels install on level and plumb before standard Monarch Z adding panels Clips

www.monarchmetal.com - 25 - (631)750-3000 WALL PANEL SYSTEMS Stainlesswww.monarchmetal.com/products/stainless-steel-wall-panel-system Steel Wall Panel System -500

1/2”www.monarchmetal.com/products/stainless-steel-wall-panel-system Exposed Stainless System -500

Features: • Exposed 1/2” reveals

• Brushed, mirror & dull ﬁnishes available

• Fabricated from 18 Ga. stainless steel

• Installation with standard Monarch Z Clips permits easy panel removal for repair

• Requires a 3/8” gap between the panel and the reveal (less with slotted holes)

0.5”

.375” The trim is notched to create a near seamless intersection

The brushed stainless perimeter is installed The panels install on level and plumb before standard Monarch Z adding panels Clips

www.monarchmetal.com - 26 - (631)750-3000 WALL PANEL SYSTEMS Stainlesswww.monarchmetal.com/products/stainless-steel-wall-panel-system Steel Wall Panel System -500

1/16”www.monarchmetal.com/products/stainless-steel-wall-panel-system Exposed Stainless System -500

Features: • Exposed 1/16” reveals

• Brushed, mirror & dull ﬁnishes available

• Fabricated from 16 Ga. stainless steel

• Installation with standard Monarch Z Clips permits easy panel removal for repair

• Requires a 3/8” gap between the panel and the reveal (less with slotted holes)

.0625” .375”

The trim is notched to create a near seamless intersection

The brushed stainless perimeter is installed The panels install on level and plumb before standard Monarch Z adding panels Clips

www.monarchmetal.com - 27 - (631)750-3000 WALL PANEL SYSTEMS Glass Wall Panel System

Glass Wall Panel System

Features:

• Installs with the Easy Panel System except the Glass Panels 0.063” are attached using the MFTAPE Thick Tape product that uses 3M VHB Tape MFTAPE • All of the same reveal options Bracket as the Easy Panel System, including narrow, recessed, Glass narrow channel and wide Panel channel

The glass wall panels are attached using the Monarch MFTAPE System

www.monarchmetal.com - 28 - (631)750-3000 WALL PANEL SYSTEMS Glass Wall Panel System

The panels then interconnect with the Easy Panel System like any other wall panel

MFTAPE MetalMetal Stud

Bottom Edge Trim The trim corners miter together seamlessly to create a clean frame Base

Wall

Panels attach using 3M VHB Tape, eliminating the need for drilling

www.monarchmetal.com - 29 - (631)750-3000 www.monarchmetal.com/products/standoffs/STANDOFFS

Aluminum Standoffs ...... 33

Stainless Standoffs ...... 34

Standoff Barrels ...... 36

Standoff Hardware ...... 38 www.monarchmetal.com/products/standoffs/STANDOFFS

Architectural Grade Materials & Finishes

Stainless Steel Aluminum Bronze (Brushed Finish) (Clear Anodized Finish) (Statuary Finish)

Countertop,www.monarchmetal.com/products/standoffs/ Panel & Architectural Signage Applicationswww.monarchmetal.com/products/standoffs/

Countertop support Panel Installation Hardware Sign Hardware

- 32 - www.monarchmetal.com (631)750-3000 STANDOFFSwww.monarchmetal.com/products/standoffs/

Aluminumwww.monarchmetal.com/products/standoffs/ Cap Standard Part No. Dia. (A) Height (B) SO-AL-1CAP 1” 3/8” SO-AL-1.25CAP 1 1/4” 1/2” A SO-AL-1.5CAP 1 1/2” 1/2” SO-AL-2CAP 2” 5/8” B Ordering Notes • Note that the height of the cap varies with the 5/16” - 18 Tapped Hole diameter • Custom sizes are available • Specify threaded connector length when ordering www.monarchmetal.com/products/standoffs/Aluminum Cap Low Proﬁle Part No. Dia. (A) Height (B) SO-AL-1LPCAP 1” 3/8” Total (1/8” Exposed) A SO-AL-1.25LPCAP 1 1/4” 3/8” Total (1/8” Exposed) SO-AL-1.5LPCAP 1 1/2” 3/8” Total (1/8” Exposed) SO-AL-2LPCAP 2” 3/8” Total (1/8” Exposed) B

Ordering Notes • Low proﬁle caps require a .250

.495 1/2” hole for installation 5/16” - 18 Tapped Hole • Specify threaded connector length when ordering

- 33 - www.monarchmetal.com (631)750-3000 STANDOFFSwww.monarchmetal.com/products/standoffs/

www.monarchmetal.com/products/standoffs/Stainless Steel Cap Standard Part No. Dia. (A) Height (B) SO-SS-1CAP 1” 3/8” Total (3/16” Exposed) SO-SS-1.25CAP 1 1/4” 3/8” Total (3/16” Exposed)

A SO-SS-1.5CAP 1 1/2” 3/8” Total (3/16” Exposed) SO-SS-2CAP 2” 3/8” Total (3/16” Exposed)

B Ordering Notes • Standard stainless caps

.437 require a 7/16” hole for .188 installation 5/16” - 18 Tapped Hole • Custom sizes are available • Specify threaded connector length when ordering

www.monarchmetal.com/products/standoffs/Stainless Steel Cap Low Proﬁle Part No. Dia. (A) Height (B) SO-SS-1LPCAP 1” 3/8” Total (1/8” Exposed) SO-SS-1.25LPCAP 1 1/4” 3/8” Total (1/8” Exposed) A SO-SS-1.5LPCAP 1 1/2” 3/8” Total (1/8” Exposed) SO-SS-2LPCAP 2” 3/8” Total (1/8” Exposed) B Ordering Notes • Low proﬁle caps require a

.250 1/2” hole for installation .495 5/16” - 18 • Specify threaded connector Tapped Hole length when ordering

- 34 - www.monarchmetal.com (631)750-3000 STANDOFFSwww.monarchmetal.com/products/standoffs/

Stainlesswww.monarchmetal.com/products/standoffs/ Steel Cap No Stem Part No. Dia. (A) Height (B) SO-SS-1NSCAP 1” 3/8” SO-SS-1.25NSCAP 1 1/4” 1/2” A SO-SS-1.5NSCAP 1 1/2” 1/2” SO-SS-2NSCAP 2” 5/8” B Ordering Notes • Please note that you are ordering the “No Stem” cap 5/16” - 18 when ordering Tapped Hole • Custom heights available • Specify threaded connector length when ordering

Stainlesswww.monarchmetal.com/products/standoffs/ Steel Cap Security Cap Part No. Dia. (A) Height (B) SO-SS-1SECCAP 1” 3/8” Total (3/16” Exposed) A SO-SS-1.25SECCAP 1 1/4” 3/8” Total (3/16” Exposed) SO-SS-1.5SECCAP 1 1/2” 3/8” Total (3/16” Exposed) B SO-SS-2SECCAP 2” 3/8” Total (3/16” Exposed)

Ordering Notes .437

.188 • Security caps require a 7/16” 5/16” - 18 hole for installation Tapped Hole • (2) 3/32” holes for tightening with spanner wrench

- 35 - www.monarchmetal.com (631)750-3000 STANDOFFSwww.monarchmetal.com/products/standoffs/

Aluminumwww.monarchmetal.com/products/standoffs/ Barrels Standard A

Ordering Notes

• Custom heights available • Aluminum Barrels up to 1” in height are tapped thru, while 2” barrels and taller are tapped approximately 5/16” - 18 7/8” from each end Tapped Hole Both Ends

Part No. Dia. (A) Height (B) 1” Dia. 1 1/4” Dia. 1 1/2” Dia. 2” Dia. 1” SO-AL-1BL-1 SO-AL-1.25BL-1 SO-AL-1.5BL-1 SO-AL-2BL-1 2” SO-AL-1BL-2 SO-AL-1.25BL-2 SO-AL-1.5BL-2 SO-AL-2BL-2 3” SO-AL-1BL-3 SO-AL-1.25BL-3 SO-AL-1.5BL-3 SO-AL-2BL-3 4” CUSTOM CUSTOM CUSTOM CUSTOM 6” CUSTOM CUSTOM CUSTOM CUSTOM

- 36 - www.monarchmetal.com (631)750-3000 STANDOFFSwww.monarchmetal.com/products/standoffs/

Stainlesswww.monarchmetal.com/products/standoffs/ Steel Barrels Standard A

Ordering Notes

• Custom sizes are available • Stainless Barrels up to 1.5” in height are tapped thru, while 2” barrels and taller are tapped approximately 5/16” - 18 3/4” from each end Tapped Hole Both Ends

Part No. Dia. (A) Height (B) 1” Dia. 1 1/4” Dia. 1 1/2” Dia. 2” Dia. 1” SO-SS-1BL-1 SO-SS-1.25BL-1 SO-SS-1.5BL-1 SO-SS-2BL-1 1 1/2” SO-SS-1BL-1.5 SO-SS-1.25BL-1.5 SO-SS-1.5BL-1.5 SO-SS-2BL-1.5 2” SO-SS-1BL-2 SO-SS-1.25BL-2 SO-SS-1.5BL-2 SO-SS-2BL-2 3” SO-SS-1BL-3 SO-SS-1.25BL-3 SO-SS-1.5BL-3 SO-SS-2BL-3 4” CUSTOM CUSTOM CUSTOM CUSTOM 6” CUSTOM CUSTOM CUSTOM CUSTOM

- 37 - www.monarchmetal.com (631)750-3000 STANDOFFSwww.monarchmetal.com/products/standoffs/

Mounting Hardware

Hanger Bolts Hanger Bolts Part Number Overall Machine Thread Wood Screw Option A HB-A 1 1/2” 5/8” 7/8” Option B HB-B 2 1/2” 1” 1 1/2” Option C HB-C 4” 2” 2”

Tabletop Screw Tabletop Screw with Anchor with Anchor Part Number Surface Thickness Option A TT-A 1” Thick Surface Option B TT-B 1.25” Thick Surface Option C TT-C 1.75” Thick Surface

Also Available

Vinyl Washers Vinyl Tube B B A C A C

Ordering Notes • Custom sizes are available • Ask for assistance from your sales representative

- 38 - www.monarchmetal.com (631)750-3000 RAINSCREEN CLADDING

Overview...... 40

Exposed Fastener System ...... 42

Concealed Fastener System ...... 43 RAINSCREEN CLADDING Overview

Similar to the way a tent ﬂy works, rain screens sit away from a building’s exterior and create a small air gap that helps protect the original structure. Rainscreen systems lend themselves well to energy efﬁciency and weather protection, as well as hassle-free installation and main tenance.

Monarch Metal supplies a number of aluminum substructure systems that work seamlessly with rainscreens. Our products are compatible with a variety of panel thicknesses and are designed to make mounting rainscreen systems effortless.

- 40 - www.monarchmetal.com (631)750-3000 RAINSCREEN CLADDING Overview

The beneﬁts of rainscreen systems include:

• Durable protection against severe weather • Excellent indoor and outdoor moisture management • Easy panel removal, repair, replacement • Cost-effectiveness and energy efﬁciency • Simple post-construction installation

Moisture

CONTINUOUS AIRFLOW

The open joint cladding creates a gap that allows Heat air to ﬂow continuously, aiding in the removal of moisture and heat from rain or condensation.

Rainscreen systems, like Trespa’s Meteon system, dually serve as protective facades and mitigation systems. They block solar gain and accommodate continuous insulation, making them energy savers that can reduce heating and cooling costs. They also help improve indoor air quality by reducing the amount of moisture that inﬁltrates a building, which keeps mold and other harmful contaminants from developing.

- 41 - www.monarchmetal.com (631)750-3000 http://www.monarchmetal.com/products/trespa-ts-110-exposed-fastener-system/ http://www.monarchmetal.com/products/trespa-ts-110-exposed-fastRAINSCREEN CLADDING ener-system/ Rainscreen System Features

Trespa TS-110 Exposed Fastener System

Top-down view

Features:

• Mounting system for Trespa Meteon drained and back ventilated rainscreen systems • Compatible with 6mm, 8mm, 10mm and 13mm panel thickness • J Channel 110-000 & Hat Channel 110-001 available in standard 10 foot lengths • Sold with 100-000 exposed panel fasteners painted to match the panel color • Certain Trespa systems in specific configurations meet the perfmorance criteria of NFPA 285 • ICC-ES Structural Testing report available: ESR-1687 • Substructure is LEED qualified and Trespa LEED information is available

110-000 J Channel 110-000 Hat Channel

- 42 - www.monarchmetal.com (631)750-3000 http://www.monarchmetal.com/products/trespa-ts-210-concealed-fastener-system/ http://www.monarchmetal.com/products/trespa-ts-210-concealed-faRAINSCREEN CLADDING stener-system/ Rainscreen System Features

Trespa TS-210 Concealed Fastener System

Top-down view Side view

Features:

• Mounting system for Trespa Meteon drained and back ventilated rainscreen systems • Compatible with 10mm and 13mm panel thickness • J Channel 110-000, Rail 200-000 and Adjustable Bracket 200-003 available • Sold with TU-S panel fasteners as needed by the end user in aditidon to the SFS installation tool • Certain Trespa systems in specific configurations meet the perfmorance criteria of NFPA 285 • ICC-ES Structural Testing report available: ESR-1687 • Substructure is LEED qualified and Trespa LEED information is available

110-000 J Channel 200-000 Rail 200-003 Adjustable Braket

- 43 - www.monarchmetal.com (631)750-3000

www.monarchmetal.com/products/aluminum-angle-architectural-metals-and-structural-profiles/ www.monarchmetal.com/products/aluminum-angle-architectural-metals-and-structural-profiles/ www.monarchmetal.com/products/aluminum-angle-architectural-metals-and-structural-profiles/ ARCHITECTURALwww.monarchmetal.com/products/aluminum-angle-architectural-metals-and-structural-profiles/ www.monarchmetal.com/products/aluminum-angle-architectural-metals-and-structural-profiles/ www.monarchmetal.com/products/aluminum-angle-architectural-metals-and-structural-profiles/ www.monarchmetal.com/products/aluminum-angle-architectural-metals-and-structural-profiles/ www.monarchmetal.com/products/aluminum-angle-architectural-metaMETALSls-and-structural-profiles/

Angle: Aluminum, Stainless and Steel ...... 46

Anodized Angle: Aluminum, Stainless and Structural Shapes ...... 53

Channel: Aluminum, Stainless

and Steel ...... 55

Flat Bar: Aluminum, Stainless and Steel ...... 61

Diamond Tread Plates ...... 66

Aluminum T Bar ...... 68

Aluminum Zees ...... 70 ALUMINUM ANGLE www.monarchmetal.com/products/architectural-aluminum-angle/Architectural Aluminum Angle

Alloy : 6063 Aluminum Type : Equal Legs & Unequal Legs Std Lengths : 16', 8' Custom : Available Punched with Holes or Cut to Length Finishes : Mill, Brushed, Anodized, Mirror Polished

DIMENSION DIMENSION THICKNESS DIMENSION DIMENSION THICKNESS A B t A B t

1/2 x 3/8 x 1/16 1 1/2 x 1/2 x 1/8 1/2 x 1/16 3/4 x 1/8 1/2 x 1/8 1 x 1/8 1 1/2 x 1/8 1 1/2 x 3/16 5/8 x 5/8 x 1/8 1 1/2 x 1/4

3/4 x 3/8 x 3/32 1 3/4 x 1 3/4 x 1/8 3/8 x 1/8 3/4 x 1/16 2 x 1/2 x 1/8 3/4 x 3/32 3/4 x 1/8 3/4 x 1/8 1 x 1/8 1 x 3/16 7/8 x 7/8 x 1/8 1 1/2 x 1/8 1 1/2 x 3/16 1 x 1/2 x 1/16 1 1/2 x 1/4 1/2 x 3/32 2 x 1/8 1/2 x 1/8 2 x 3/16 3/4 x 1/8 2 x 1/4 1 x 1/16 1 x 1/8 2 1/2 x 1 1/2 x 1/8 1 x 3/16 1 x 1/4 2 1/2 x 2 x 1/8 2 x 3/16 1 1/4 x 1/2 x 1/8 2 x 1/4 3/4 x 1/8 2 1/2 x 1/8 1 x 1/8 2 1/2 x 3/16 1 1/4 x 1/8 2 1/2 x 1/4 1 1/4 x 3/16 1 1/4 x 1/4 2 3/4 x 1 3/4 x 1/4

- 46 - www.monarchmetal.com (631)750-3000 ALUMINUM ANGLE www.monarchmetal.com/products/architectural-aluminum-angle/Architectural Aluminum Angle

Alloy : 6063 Aluminum Type : Equal Legs & Unequal Legs Std Lengths : 16', 8' Custom : Available Punched with Holes or Cut to Length Finishes : Mill, Brushed Finish, Anodized, Mirror Polished

DIMENSION DIMENSION THICKNESS DIMENSION DIMENSION THICKNESS A B t A B t

3 x 1/2 x 1/8 1 x 1/8 2 x 1/8 2 x 1/4 3 x 1/8 3 x 3/16 3 x 1/4

3 1/2 x 1 1/4 x 1/8

4 x 2 x 1/8 4 x 1/8

5 x 3 x 1/8

- 47 - www.monarchmetal.com (631)750-3000 ALUMINUM ANGLE www.monarchmetal.com/products/structural-aluminum-angle/Structural Aluminum Angle

Alloy : 6061 Aluminum Type : Equal Legs & Unequal Legs Std Lengths : 25' Custom : Available Punched with Holes or Cut to Length Finishes : Mill, Brushed, Mirror Polished

DIMENSION DIMENSION THICKNESS DIMENSION DIMENSION THICKNESS A B t A B t

3/4 x 3/4 x 1/8 2 x 2 x 1/8 3/16 1 x 1 x 1/8 1/4 3/16 5/16 1/4 3/8

1 1/4 x 1 1/4 x 1/8 2 1/2 x 1 1/2 x 1/8 3/16 3/16 1/4 1/4

1 1/2 x 1 x 1/4 2 1/2 x 2 x 3/16 1/4 1 1/2 x 1 1/4 x 1/8 3/16 2 1/2 x 2 1/2 x 1/8 1/4 3/16 1/4 1 1/2 x 1 1/2 x 1/8 5/16 3/16 3/8 1/4 3 x 2 x 3/16 1 3/4 x 1 1/4 x 1/8 1/4 1/4 3/8

1 3/4 x 1 3/4 x 1/8 3 x 2 1/2 x 1/4 3/16 3/8 1/4 3 x 3 x 3/16 2 x 1 1/2 x 1/8 1/4 3/16 5/16 1/4 3/8 1/2

- 48 - www.monarchmetal.com (631)750-3000 ALUMINUM ANGLE Structuralwww.monarchmetal.com/products/structural-aluminum-angle/ Aluminum Angle

Alloy : 6061 Aluminum Type : Equal Legs & Unequal Legs Std Lengths : 25' Custom : Available Punched with Holes or Cut to Length Finishes : Mill, Brushed, Mirror Polished

DIMENSION DIMENSION THICKNESS DIMENSION DIMENSION THICKNESS A B t A B t

3 1/2 x 2 1/2 x 1/4 8 x 6 x 3/4 3/8 8 x 1/2 1/2

3 1/2 x 3 1/2 x 1/4 3/8 1/2

4 x 3 x 1/4 3/8 1/2

4 x 4 x 1/4 3/8 1/2

5 x 3 x 3/8 1/2

5 x 5 x 3/8 1/2

6 x 3 x 3/8 3 1/2 x 1/2 4 x 3/8 1/2 6 x 3/8 1/2

- 49 - www.monarchmetal.com (631)750-3000 www.monarchmetal.com/products/equal-unequal-leg-stainless-steelSTAINLESS STEEL ANGLE -angle/ Equal & Unequal Leg Stainless Steel Angle

Alloy : 304 or 316 Alloy Type : Equal Legs & Unequal Legs Std Lengths : 20' Custom : Available Punched with Holes or Cut to Length Finishes : Mill, Brushed, Mirror Polished

DIMENSION DIMENSION THICKNESS DIMENSION DIMENSION THICKNESS A B t A B t 3/4 x 3/4 x 1/8 3 1/2 x 3 1/2 x 1/4 3/16 4 x 4 x 1/4 1 x 1 x 1/8 3/8 3/16 1/2 1/4 5 x 5 x 3/8 1 1/4 x 1 1/4 x 1/8 3/16 6 x 3 x 3/8 1/4 6 x 3/8

1 1/2 x 1 1/2 x 1/8 3/16 1/4

2 x 2 x 1/8 3/16 1/4 3/8

2 1/2 x 2 1/2 x 3/16 1/4 3/8

3 x 3 x 3/16 1/4 5/16 3/8 1/2

- 50 - www.monarchmetal.com (631)750-3000 STEELwww.monarchmetal.com/products/equal-unequal-leg-steel-angle/ ANGLE Equal & Unequal Leg Steel Angle

Alloy : Mild Steel Type : Equal Legs & Unequal Legs Std Lengths : 20' Custom : Available Punched with Holes or Cut to Length Finishes : Mill

DIMENSION DIMENSION THICKNESS DIMENSION DIMENSION THICKNESS A B t A B t

1/2 x 1/2 x 1/8 3 x 2 x 1/4 3/8 3/4 x 3/4 x 1/8 1/2 2 1/2 x 1/4 1 x 1 x 1/8 3/8 3/16 1/2 1/4 3 x 1/4 3/8 1 1/4 x 1 1/4 x 1/8 1/2 3/16

1 1/2 x 1 1/2 x 1/8 3 1/2 x 2 1/2 x 1/4 3/16 1/2 1/4 3 x 1/4 1/2 1 3/4 x 1 3/4 x 1/8 3 1/2 x 1/4 3/16 1/2 1/4 4 x 3 x 1/4 2 x 2 x 1/8 3/8 3/16 4 x 1/4 1/4 3/8 5/16 1/2 3/8 5 x 3 x 1/4 2 1/2 x 2 1/2 x 3/16 5/16 1/4 3/8 5/16 1/2 3/8 1/2

- 51 - www.monarchmetal.com (631)750-3000 STEELwww.monarchmetal.com/products/equal-unequal-leg-steel-angle/ ANGLE Equal & Unequal Leg Steel Angle

Alloy : Mild Steel Type : Equal Legs & Unequal Legs Std Lengths : 20' Custom : Available Punched with Holes or Cut to Length Finishes : Mill

DIMENSION DIMENSION THICKNESS DIMENSION DIMENSION THICKNESS A B t A B t 5 x 3 1/2 x 1/4 5/16 3/8 1/2 5/8 3/4 5 x 3/8 1/2 3/4

6 x 6 x 3/8 1/2 3/4

8 x 8 x 1/2 3/4

- 52 - www.monarchmetal.com (631)750-3000 ANODIZEDwww.monarchmetal.com/products/stock-anodized-angle-shapes/ ANGLE Swww.monarchmetal.com/products/stock-anodized-angle-shapes/tock Anodized Angle & Shapes

Alloy : 6063 Aluminum Type : Equal Legs & Unequal Legs Std Lengths : 16', 8' Custom : Available Punched with Holes or Cut to Length Finishes : Clear Anodized

DIMENSION DIMENSION THICKNESS DIMENSION DIMENSION THICKNESS A B t A B t

3/4 x 3/4 x 1/8

1 x 1 x 1/8

1 1/4 x 1 1/4 x 1/8

1 1/2 x 1 1/2 x 1/8

2 x 1 1/2 x 1/8

• Many More Anodized Shapes & Sizes Available •

• Please Call 631-563-8967 •

- 53 - www.monarchmetal.com (631)750-3000 STAINLESSwww.monarchmetal.com/products/stainless-sharp-corner-angle/ STEEL ANGLE - SHARP CORNER Equal & Unequal Leg Stainless Angle

$ W

% Alloy : Stainless Steel ASTM A1069/A1069M/11 Type : Equal Legs & Unequal Legs Std Lengths : 20' Custom : Available Punched with Holes or Cut to Length Finishes : Bead Blasted as Mill, Brushed, or Mirror Polished

DIMENSION DIMENSION THICKNESS DIMENSION DIMENSION THICKNESS A B t A B t

1 x 1 x 1/8 6 x 6 x 1/4

1 1/4 x 1 1/4 x 1/8 6 x 6 x 5/8

1 1/2 x 1 1/2 x 1/8 8 x 8 x 1/4

2 x 2 x 1/8 8 x 8 x 3/8

5 x 5 x 1/4 8 x 8 x 1/2

5 x 5 x 5/16 8 x 8 x 5/8

5 x 5 x 5/8 8 x 8 x 3/4

• Minimum Order Applies •

• Please Call 631-563-8967 •

- 54 - www.monarchmetal.com (631)750-3000 STAINLESS STEEL CHANNEL - SHARP CORNER www.monarchmetal.com/products/stainless-sharp-corner-channel/Stainless Sharp Corner Channel

Alloy : Stainless Steel ASTM A1069/A1069M/11 Type : Equal Legs & Unequal Legs Std Lengths : 20' Custom : Available Punched with Holes or Cut to Length Finishes : Bead Blasted as Mill, Brushed, or Mirror Polished

BASE BASE FLANGE FLANGE BASE BASE FLANGE FLANGE A t B t1 A t B t1 3 x .258 x 1.498 x .273 10 x .240 x 2.600 x .436 .356 x 1.596 x .273 .379 x 2.739 x .436 .526 x 2.886 x .436 6 x .437 x 2.157 x .343 .673 x 3.033 x .436

7 x .437 x 2.157 x .343 12 x .282 x 2.942 x .501 .210 x 2.090 x .366 .387 x 3.047 x .501 .314 x 2.194 x .366 .510 x 3.170 x .501 .419 x 2.299 x .366 15 x .400 x 3.400 x .650 8 x .220 x 2.260 x .390 .520 x 3.520 x .650 .303 x 2.343 x .390 .716 x 3.716 x .650

9 x .233 x 2.433 x .413 .285 x 2.485 x .413 .448 x 2.648 x .413

• Minimum Order Applies •

• Please Call 631-563-8967 •

- 55 - www.monarchmetal.com (631)750-3000 ALUMINUM CHANNEL www.monarchmetal.com/products/aluminum-sharp-corner-channel-c-cAluminum Sharp Corner Channel ( “C Channel”/ “U Channel”)hannel-u-channel/

Alloy : 6063 Aluminum Type : Sharp Corner Std Lengths : 16', 8' Custom : Available Drilled with Holes or Cut to Length Finishes : Mill, Brushed Finish, Anodized, Mirror Polished

DIMENSION DIMENSION THICKNESS DIMENSION DIMENSION THICKNESS A B t A B t 3/8 x 3/8 x 1/16 1 3/4 x 3/4 x 1/8 1 x 1/8 1/2 x 3/8 x 1/8 1 3/4 x 1/8 1/2 x 3/32 3/4 x 1/8 2 x 1/2 x 1/8 1 x 1/8 5/8 x 5/8 x 1/8 1 x 3/16 1 1/2 x 1/8 3/4 x 3/8 x 1/8 2 x 1/8 1/2 x 1/16 2 x 1/4 1/2 x 1/8 3/4 x 1/8 2 1/4 x 7/8 x 1/8 1 x 1/8 1 1/2 x 1/8 2 3/8 x 1 1/4 x 3/16

1 x 1/2 x 1/8 2 1/2 x 1 x 1/8 3/4 x 1/8 1 1/2 x 1/8 1 x 1/8 1 1/2 x 1/8 3 x 1/2 x 1/8 2 x 1/8 1 x 1/8 2 x 1/8 1 1/8 x 1 1/8 x 1/8 3 x 1/8

1 1/4 x 1/2 x 1/8 4 x 1 1/2 x 1/8 3/4 x 1/8 1 1/4 x 1/8 5 x 2 x 3/16

1 1/2 x 1/2 x 1/8 3/4 x 1/8 1 x 1/8 1 1/2 x 1/8

- 56 - www.monarchmetal.com (631)750-3000 ALUMINUM CHANNEL Aluminumwww.monarchmetal.com/products/aluminum-association-aluminum-cha Association Aluminum Channel nnel/

Alloy : 6061 Aluminum Type : Aluminum Association Std Lengths : 25' Custom : Available Drilled with Holes or Cut to Length Finishes : Mill, Brushed Finish, Mirror Polished

BASE BASE FLANGE FLANGE BASE BASE FLANGE FLANGE A t B t1 A t B t1 2 x .130 x 1 x .130 7 x .170 x 2 3/4 x .290 .170 x 1 1/4 x .260 .210 x 3 1/2 x .380.350

3 x .130 x 1 1/2 x .200 8 x .190 x 3 x .350 .170 x 1 3/4 x .260 .250 x 3 3/4 x .410

4 x .150 x 2 x .230 9 x .230 x 3 1/4 x .350 .190 x 2 1/4 x .290 .290 x 4 x .440

5 x .150 x 2 1/4 x .260 10 x .250 x 3 1/2 x .410 .190 x 2 3/4 x .320 .310 x 4 1/4 x .500

6 x .170 x 2 1/2 x .290 12 x .290 x 4 x .470 .210 x 3 1/4 x .350 .350 x 5 x .620

- 57 - www.monarchmetal.com (631)750-3000 ALUMINUM CHANNEL www.monarchmetal.com/products/american-standard-aluminum-channeAmerican Standard Aluminum Channel l/

Alloy : 6061 Aluminum Type : American Standard Std Lengths : 25' Custom : Available Drilled with Holes or Cut to Length Finishes : Mill, Brushed Finish, Mirror Polished

DIMENSION DIMENSION THICKNESS DIMENSION DIMENSION THICKNESS A B t A B t

3 x 1.41 x .170 12 x 2.96 x .300 1.50 x .258 3.05 x .387 1.60 x .356 3.17 x .510

4 x 1.58 x .180 15 x 3.40 x .400 1.65 x .247 3.72 x .716 1.72 x .320

5 x 1.75 x .190 1.89 x .325 2.03 x .472

6 x 1.92 x .200 1.95 x .225 2.03 x .314 2.16 x .437

7 x 2.11 x .230 2.19 x .314

8 x 2.29 x .250 2.34 x .303 2.53 x .487

9 x 2.43 x .230 2.65 x .448

10 x 2.60 x .240 2.89 x .526

- 58 - www.monarchmetal.com (631)750-3000 STAINLESS STEEL CHANNEL Swww.monarchmetal.com/products/stainless-steel-channel/tainless Steel Channel

Alloy : 304 Alloy Type : ASTM A 276 Std Lengths : 20', RL Custom : Available Punched with Holes or Cut to Length Finishes : Mill, Brushed Finish

DIMENSION DIMENSION THICKNESS DIMENSION DIMENSION THICKNESS A B t A B t

1 1/2 x 3/4 x 1/8

2 x 1 x 1/8 1/4

3 x 1 3/8 x 3/16 1 1/2 x 1/4

4 x 1 3/4 x 1/4

6 x 3 x 3/8

- 59 - www.monarchmetal.com (631)750-3000 STEEL CHANNEL www.monarchmetal.com/products/mild-steel-channel/Mild Steel Channel

Alloy : Mild Steel Type : ASTM A 36 Std Lengths : 20', 40' Custom : Available Punched with Holes or Cut to Length Finishes : Mill

DIMENSION DIMENSION THICKNESS DIMENSION DIMENSION THICKNESS A B t A B t

3 x 1.41 x .170 9 x 2.43 x .233 1.50 x .258 2.49 x .285 1.60 x .356 2.65 x .488 1.94 x .312 10 x 2.60 x .240 4 x 1.58 x .184 2.74 x .379 1.65 x .247 3.50 x .312 1.72 x .321 2.89 x .526 2.50 x .500 3.95 x .425 3.03 x .673 5 x 1.75 x .190 1.89 x .325 12 x 1.50 x .190 2.94 x .282 6 x 1.92 x .200 3.05 x .387 2.03 x .314 3.17 x .510 2.50 x .310 3.67 x .370 2.16 x .437 3.77 x .467 3.50 x .340 3.89 x .590 3.00 x .375 13 x 4.00 x .375 7 x 2.09 x .210 2.19 x .314 18 x 3.95 x .450 2.30 .419 4.00 x .500

8 x 1.88 x .180 2.26 x .220 2.34 x .303 2.53 x .487 3.03 x .400 3.50 x .427

- 60 - www.monarchmetal.com (631)750-3000 FLAT BAR Aluminumwww.monarchmetal.com/products/aluminum-ﬂat-bar/ Flat Bar

Alloy : 6063 Aluminum Type : ASTM B 221 Std Lengths : 16', 8' Custom : Available Punched with Holes or Cut to Length Finishes : Mill, Brushed Finish, Anodized, Mirror Polished

THICKNESS DIMENSION THICKNESS DIMENSION t A t A

1/8 x 1/8 3/8 x 3/8 1/2 3/4 3/4 1 1 1 1/2 1 1/4 2 1 1/2 2 1/2 1 3/4 3 2 4 3 1/2 x 1/2 3/16 x 3/16 3/4 1/2 1 3/4 1 1/4 1 1 1/2 1 1/4 2 1 1/2 1 3/4 3/4 x 3/4 2 1 1 1/4 1/4 x 1/4 1 1/2 1/2 5/8 1 x 1 1/2 3/4 1 1 1/2 2 2 1/2 3 4

- 61 - www.monarchmetal.com (631)750-3000 FLAT BAR Stainlesswww.monarchmetal.com/products/stainless-steel-ﬂat-bar/ Steel Flat Bar

Alloy : 304 or 316 Alloy Type : ASTM A 276/479 Std Lengths : 12' Custom : Available Punched with Holes or Cut to Length Finishes : Mill, Brushed Finish, Mirror Polished

THICKNESS DIMENSION THICKNESS DIMENSION t A t A 1/8 x 1/8 5/16 x 5/16 1/4 1/2 3/8 3/4 1/2 1 5/8 1 1/4 3/4 1 1/2 7/8 1 3/4 1 2 1 1/4 2 1/4 1 1/2 2 1/2 1 3/4 3 2 4 2 1/2 3 3/8 x 3/8 1/2 1/4 x 1/4 5/8 3/8 3/4 1/2 1 5/8 1 1/4 3/4 1 1/2 7/8 1 3/4 1 2 1 1/4 2 1/4 1 1/2 2 1/2 1 3/4 3 2 3 1/2 2 1/4 4 2 1/2 4 1/2 3 5 3 1/2 6

- 62 - www.monarchmetal.com (631)750-3000 FLAT BAR Stainlesswww.monarchmetal.com/products/stainless-steel-ﬂat-bar/ Steel Flat Bar

Alloy : 304 or 316 Alloy Type : ASTM A 276/479 Std Lengths : 12' Custom : Available Punched with Holes or Cut to Length Finishes : Mill, Brushed Finish, Mirror Polished

THICKNESS DIMENSION THICKNESS DIMENSION t A t A

1/2 x 1/2 3/4 x 3/4 3/4 1 7/8 1 1/4 1 1 1/2 1 1/4 1 3/4 1 1/2 2 1 3/4 2 1/4 2 2 1/2 2 1/2 3 3 3 1/2 3 1/2 4 4 4 1/2 4 1/2 5 5 6 6 7/8 x 1 5/8 x 5/8 1 1/4 3/4 1 1/2 1 2 1 1/4 1 1/2 1 x 1 1/4 1 3/4 1 1/2 2 1 3/4 2 1/4 2 2 1/2 2 1/4 3 2 1/2 3 1/2 3 4 3 1/2 5 4 6 4 1/2

- 63 - www.monarchmetal.com (631)750-3000 FLAT BAR Stainlesswww.monarchmetal.com/products/stainless-steel-ﬂat-bar/ Steel Flat Bar

Alloy : 304 or 316 Alloy Type : ASTM A 276/479 Std Lengths : 12' Custom : Available Punched with Holes or Cut to Length Finishes : Mill, Brushed Finish, Mirror Polished

THICKNESS DIMENSION THICKNESS DIMENSION t A t A

1 x 5 2 x 2 1/4 6 2 1/2 8 3 4 1 1/4 x 1 1/2 5 2 6 2 1/4 2 1/2 3 3 1/2 4 5 6

1 1/2 x 1 3/4 2 2 1/4 2 1/2 3 4 6

1 3/4 x 2 2 1/4 2 1/2 3 4 5 6

- 64 - www.monarchmetal.com (631)750-3000 FLAT BAR www.monarchmetal.com/products/brass-ﬂat-bar/Brass Flat Bar

Alloy : 360 Alloy Type : ASTM B 16 Std Lengths : 12' Custom : Available Punched with Holes or Cut to Length Finishes : Mill, Brushed Finish, Mirror Polished

THICKNESS DIMENSION THICKNESS DIMENSION t A t A

1/8 x 1/8 3/16 x 3 3/16 3 1/2 1/4 4 5/16 3/8 1/4 x 1/4 1/2 5/16 5/8 3/8 3/4 1/2 7/8 5/8 1 3/4 1 1/4 7/8 1 1/2 1 1 3/4 1 1/4 2 1 1/2 2 1/4 1 3/4 2 1/2 2 3 2 1/2 3 1/2 2 3/4 4 3 3 1/2 3/16 x 3/16 4 3/8 1/2 5/16 x 5/16 5/8 3/8 3/4 1/2 7/8 5/8 1 3/4 1 1/4 1 1 1/2 1 1/4 1 3/4 1 1/2 2 2 1/2

- 65 - www.monarchmetal.com (631)750-3000 DIAMOND-TREADwww.monarchmetal.com/products/aluminum-diamond-tread-plates/ PLATES Aluminum

Alloy : 3003 Alloy or 6061 Alloy Type : Diamond Pattern Std Lengths : See Below Custom : Available Cut to Size Finishes : Mill or Bright Finish

THICKNESS WIDTH LENGTH THICKNESS WIDTH LENGTH t (Inches) (Inches) t (Inches) (Inches)

.063 x 48 x 96 48 x 120

.100 x 48 x 96

.125 x 48 x 96 48 x 120

.190 x 48 x 96 48 x 120

.250 x 48 x 96 48 x 120

.375 x 48 x 96 48 x 120

.500 x 48 x 96 48 x 120

- 66 - www.monarchmetal.com (631)750-3000 www.monarchmetal.com/products/stainless-steel-diamond-tread-plaDIAMOND-TREAD PLATES tes/ Stainless Steel

Alloy : 304 Alloy Type : Diamond Pattern Std Lengths : See Below Custom : Available Cut to Size Finishes : Mill

THICKNESS WIDTH LENGTH THICKNESS WIDTH LENGTH t (Inches) (Inches) t (Inches) (Inches) .125 x 48 x 120

.188 x 36 x 120 48 x 96 48 x 120

.250 x 48 x 96

.375 x 48 x 96

- 67 - www.monarchmetal.com (631)750-3000 ALUMINUMwww.monarchmetal.com/products/sharp-corner-aluminum-t-bar/ TEES www.monarchmetal.com/products/sharp-corner-aluminum-t-bar/Sharp Corner Aluminum T Bar

Alloy : 6063 Aluminum Type : Sharp Corner Std Lengths : 16', 8' Custom : Available Drilled with Holes or Cut to Length Finishes : Mill, Brushed Finish, Anodized, Mirror Polished

DIMENSION DIMENSION THICKNESS DIMENSION DIMENSION THICKNESS A B t A B t 3/4 x 3/4 x 1/8

1 x 1 x 1/8

1 1/4 x 7/8 x 1/8

1 1/2 x 1 1/2 x 1/8

2 x 3/4 x 1/8 2 x 3/16 2 x 1/4

- 68 - www.monarchmetal.com (631)750-3000 ALUMINUM TEES Structuralwww.http://monarchmetal.com/products/structural-aluminum-t-bar/ Aluminum T Bar

Alloy : 6061 Aluminum Type : American Standard Std Lengths : 25' Custom : Available Drilled with Holes or Cut to Length Finishes : Mill

DIMENSION DIMENSION THICKNESS DIMENSION DIMENSION THICKNESS A B t A B t

1 1/2 x 1 1/2 x 1/4

2 x 2 x 3/16 2 x 1/4

2 1/2 x 2 1/2 x 5/16

3 x 3 x 3/8

4 x 4 x 3/8

- 69 - www.monarchmetal.com (631)750-3000 ALUMINUM ZEES www.monarchmetal.com/products/sharp-corner-aluminum-z-bar/Sharp Corner Aluminum Z Bar

Alloy : 6063 Aluminum Type : Sharp Corner Std Lengths : 16', 8' Custom : Available Drilled with Holes or Cut to Length Finishes : Mill, Brushed Finish, Anodized, Mirror Polished

DIMENSION DIMENSION THICKNESS DIMENSION DIMENSION THICKNESS A B t A B t 1/2 x 1/2 x 3/32

3/4 x 3/4 x 1/8

3/4 x 7/8 x 1/8

1 1/8 x 1 x 1/8

- 70 - www.monarchmetal.com (631)750-3000 ALUMINUM ZEES www.monarchmetal.com/products/structural-aluminum-z-bar/Structural Aluminum Z Bar

Alloy : 6061 Aluminum Type : Sharp Corners, Radius on Interior Angles Std Lengths : 25' Custom : Available Drilled with Holes or Cut to Length Finishes : Mill

DIMENSION DIMENSION THICKNESS DIMENSION DIMENSION THICKNESS A B t A B t

2 x 1 1/4 x 3/16

2 1/2 x 1 1/2 x 3/16

3 x 2 11/16 x 1/4

4 x 3 1/16 x 1/4

- 71 - www.monarchmetal.com (631)750-3000 www.monarchmetal.com/products/corner-guards/ www.monarchmetal.com/products/corner-guards/CORNER GUARDS www.monarchmetal.com/products/kick-plates/ www.monarchmetal.com/products/kick-plates/& KICK PLATES

Corner Guards ...... 74

Kick Plates ...... 75 CORNERwww.monarchmetal.com/products/corner-guards/ GUARDS Stainless Steel & Aluminum

B 90° Sharp Angle

Alloy : 304 Stainless, Aluminum, Diamond Plate Type : 16 Gauge (Standard), 14 Ga., 18 Ga. Std Lengths : 4', 8' Custom : Available Punched with Holes or Cut to Length Finishes : Brushed Finish, Mirror Polished

DIMENSION DIMENSION THICKNESS PRICE STANDARD A B t

90˚ Angle 1 1/4 x 48 x 1/16 $31.35 16 Ga Stainless Steel, Adhesive Mounted 1 1/4 x 96 x 1/16 $53.65 16 Ga Stainless Steel, Adhesive Mounted 1 1/2 x 48 x 1/16 $36.94 16 Ga Stainless Steel, Adhesive Mounted 1 1/2 x 96 x 1/16 $63.27 16 Ga Stainless Steel, Adhesive Mounted 2 1/2 x 48 x 1/16 $55.90 16 Ga Stainless Steel, Adhesive Mounted 2 1/2 x 96 x 1/16 $100.49 16 Ga Stainless Steel, Adhesive Mounted 3 1/2 x 48 x 1/16 $78.82 16 Ga Stainless Steel, Adhesive Mounted 3 1/2 x 96 x 1/16 $141.61 16 Ga Stainless Steel, Adhesive Mounted

B 90° Rounded Angle

Bullnose 3 1/2 x 48 x 1/16 $78.82 16 Ga Stainless Steel, Adhesive Mounted 3 1/2 x 96 x 1/16 $141.61 16 Ga Stainless Steel, Adhesive Mounted

• Custom Shapes & Sizes Available • • Please Call 631-563-8967 •

- 74 - www.monarchmetal.com (631)750-3000 www.monarchmetal.com/products/kick-plates/KICK PLATES Stainless Steel & Aluminum

t B

Alloy : 304 Stainless, Aluminum, Bronze, Brass Type : 18 Gauge (Standard), 16 Ga., 11 Ga. Std Lengths : See Below Custom : Available with Rough Finish for Adhesive, Punched, or Punched & Countersunk Finishes : Mill, Brushed Finish, Mirror Polished

DIMENSION DIMENSION THICKNESS TYPE PRICE STANDARD A B t

24 x 34 x 18 Ga. Armor Plate $38.63 18 Ga Stainless, No Holes 28 x 6 x 18 Ga. Mop Plate $16.09 18 Ga Stainless, No Holes 28 x 8 x 18 Ga. Kick Plate $18.79 18 Ga Stainless, No Holes 28 x 10 x 18 Ga. Kick Plate $26.80 18 Ga Stainless, No Holes 28 x 12 x 18 Ga. Kick Plate $32.17 18 Ga Stainless, No Holes 28 x 36 x 18 Ga. Armor Plate $90.95 18 Ga Stainless, No Holes 28 x 42 x 18 Ga. Armor Plate $130.50 18 Ga Stainless, No Holes 30 x 6 x 18 Ga. Mop Plate $17.23 18 Ga Stainless, No Holes 30 x 8 x 18 Ga. Kick Plate $20.10 18 Ga Stainless, No Holes 30 x 10 x 18 Ga. Kick Plate $28.71 18 Ga Stainless, No Holes 30 x 12 x 18 Ga. Kick Plate $34.46 18 Ga Stainless, No Holes 34 x 6 x 18 Ga. Mop Plate $19.51 18 Ga Stainless, No Holes 34 x 8 x 18 Ga. Kick Plate $22.77 18 Ga Stainless, No Holes 34 x 10 x 18 Ga. Kick Plate $32.54 18 Ga Stainless, No Holes 34 x 12 x 18 Ga. Kick Plate $39.06 18 Ga Stainless, No Holes 34 x 16 x 18 Ga. Kick Plate $48.29 18 Ga Stainless, No Holes 34 x 34 x 18 Ga. Armor Plate $107.98 18 Ga Stainless, No Holes 34 x 36 x 18 Ga. Armor Plate $107.98 18 Ga Stainless, No Holes 34 x 42 x 18 Ga. Armor Plate $124.56 18 Ga Stainless, No Holes 34 x 46 x 18 Ga. Armor Plate $124.56 18 Ga Stainless, No Holes 36 x 8 x 18 Ga. Kick Plate $23.62 18 Ga Stainless, No Holes 36 x 10 x 18 Ga. Kick Plate $34.46 18 Ga Stainless, No Holes 36 x 12 x 18 Ga. Kick Plate $41.34 18 Ga Stainless, No Holes

• Custom Shapes & Sizes Available • • Please Call 631-563-8967 •

- 75 - www.monarchmetal.com (631)750-3000

www.monarchmetal.com/products/easy-wall-panel-system www.monarchmetal.com/products/easy-wall-panel-systemWALL PANEL SYSTEMS Four Different Looks for Reveals www.monarchmetal.com/products/easy-wall-panel-system(Page 19)

Monarch Metal Fabrication • 1625 Sycamore Ave, Bohemia, New York 11716 • United States of America (631) 750-3000 • (631) 563-8976 • [email protected] • www.monarchmetal.com Wall Panel Mounting Systems

Architectural Metals

Monarch Metal 1625 Sycamore Ave Bohemia, New York 11716 (631) 750 3000 [email protected]