DOCSLIB.ORG

Iron Age Architectural Metals®

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Iron Age Architectural Metals® P.O. Box 607976 Orlando, FL 32860-7976 IRON AGE ARCHITECTURAL METALS® ORNAMENTAL Italian Architectural Metal Components Forged Steel E Stainless Steel E Aluminum ORLANDO, FLORIDA I QUICK REFERENCE RON CATALOG #7 E I RON www.ironagemetals.com A GE Phone: 407-293-5788 A Fax: 407-295-6847 RCH Toll Free: 800-299-5788 I Are you currently ordering ornamental iron components from an TECTURAL out-of-town supplier? Are you tired of paying high shipping costs? Come to Iron Age! Our Warehouse has the largest inventory of ornamental iron in Central Florida and is the only showroom of this type in the state. Our experienced staff can assist you with design, as well as telephone and special orders. Our large inventory allows us to fill M your order on-site. Delivery is available thoughout Central Florida. ET We are conveniently located at 2401 Clark Street in Apopka adjacent A to Surplus Steel and Supply. Showroom hours are Monday through LS Friday, 8:00 a.m. to 5:00 p.m. E ORLANDO , F LOR 407-293-5788 • 800-299-5788 • Fax: 407-295-6847 2401 Clark Street • Apopka, FL 32703 IDA www.ironagemetals.com INDUSTRIA ITALIANA ARTEFERRO FOR STRUCTURAL STEEL AND OTHER METALS RELY ON... Located conveniently adjacent to Iron Age Architectural Metals, Surplus Steel & Supply has been serving East Central Florida since 1980. As a family owned and operated business, we provide excellent customer service with our quick quotes, helpful staff, and wide variety of metal products, including galvanized “B” deck, ornamental forgings, trailer parts, welding supplies, and primer paint. Surplus Steel & Supply carries the largest selection of high-quality secondary steel in all the state of Florida. We also carry prime material with IRON AGE ARCHITECTURAL METALS® mill test reports upon request. If by chance we don’t have what you need when you Italian Architectural Forged Steel Components call, we generally can have it within 24-hours from our broad network of steel mill suppliers. We also supply most aluminum and stainless shapes. 2401 Clark Street Apopka, FL 32703 We are manufacturers of heavy duty galvanized corrugated roofing for barns, Tel: 407-293-5788 • 800-299-5788 boat docks, and small shops. Since you’re dealing direct with the manufacturer, you’ll be pleased with our Fax: 407-295-6847 low cost pricing structure. We are Metro-Orlando’s largest stocking distributor of culvert for driveways and www.ironagemetals.com drainage pipe. Rely on Surplus Steel & Supply and Iron Age Architectural Metals as your Iron Age Architectural Metals® is centrally located in Metro “one-stop” metals supplier. Orlando, with a beautiful showroom offering the largest inventory of Ornamental Iron components in Florida, as well as Sample Designs to use as inspiration for your project. Our metal work is accessible and on display, rather than relying on Surplus Steel & Supply, Inc. ill-representative catalogues. 3015 Gamson Road Our expert staff can handle any inquiry from general interest questions, to designers needing Apopka, FL 32703 exact industry specifications. We can also assist with design ideas and layouts, as well as any Phone: 407.293.5788 or 800.299.5788 special orders you might need. And unlike our competitors, we have a fleet of trucks that can personally deliver your order directly to the job site, your home, or your shop, reducing overall Fax# 407-297-3972 costs up to 40%! Email:[email protected] Conveniently located in Central Florida, our state-of-the-art warehouse has a vast inventory of ornamental metals readily available to use in your renovation or fabrication project. Our stock includes forged steel and aluminum as well as wrou- ght iron, cast iron, steel, cast aluminum, and brass. Our inventory of hand forged iron and wrought iron balusters, handrails, burglar bars, brackets, fittings (including pipe) and rosettes for staircases, balustrades or railings, are just some of the architectural metal components you’ll find on hand. Contact us for a quote or visit our showroom to inquire about all the services available to you. We are conveniently located at 2401 Clark Street in Apopka adjacent to Surplus Steel & Supply. Showroom hours are Monday through Friday, 8:00 a.m. to 5:00 p.m. Closed for lunch 12:00 p.m. to 1:00 p.m. Iron Age Architectural Metals® has the largest inventory of Ornamental Iron in Florida! Authorized Distributor Proudly Affiliated with COPYRIGHT REPRODUCTION PROHIBITED TABLE OF CONTENTS 2-4 Introduction 139-142 Shoes, Bushings and Baskets 5-18 Scrolls 143-146 Ring and Spheres 19-30 Rosettes 147-154 Spear Points 31-32 Snap - Ons 155-156 Finials and Plates 33-62 Panels 157-162 Flowers and Ornaments 63-102 Pickets 163-168 Accessories 103-108 Belly Pickets 169-184 Aluminum 109-116 Newel Posts 185-194 Hand Carved Stair Parts 117-130 Handrail and 195-216 Powder Coated Pickets Long Bars 131-136 Pierced Bars 217-259 ARTEFERRO INOX 137-138 Gate Tops 260-264 Catalogs 3 www.indital.com Reproduction Prohibited www.indital.com by 3 FORGINGS Quick Reference Catalog #7 While wrought iron has been a part of the architecture designs. Pulling from an international portfolio of over styles seen throughout Europe for centuries, it is accurate to note that in the United States this is becoming a you are searching for to tackle that next project. For growing trend in regional and even national appeal. Of immediate sourcing We incorporate a national steel great interest is the consumer involvement in developing distribution network for fast, reliable sourcing of the their own projects for a myriad of applications. We over 3,000 wrought iron parts carried in our Houston, are proud to introduce new designs that take the TX master warehouse. Many of the top sellers including guess work out of “what is next” in the evolving world of balusters, newels, scrolls, rosettes, panels, decorative bar, . s t ce j orp YID ro , s rovaedne l a i cremmoc , gn i d l i ub emoh ub i l d i gn , cremmoc i a l rovaedne s , ro YID orp j ce t s . and miscellaneous metal art accents can be sourced As a manufacturer we welcome a review of your own immediately within your local markets. • Scrolls................ 05 • Pierced Bars................................ 131 • Rosettes............ 19 • Gate Tops.................................... 137 • Snap-Ons.......... 31 • Shoes, Bushings & Baskets....... 139 • Panels................. 33 • Ring and Spheres ...................... 143 • Pickets................ 63 • Spear Points................................ 147 • Belly Pickets...... 103 • Finials and Plates........................ 155 • Newel Posts..... 109 • Flowers and Ornaments.......... 157 • Handrail............. 117 • Accessories................................. 163 4 • Aluminum.................................... 169 by 4 www.indital.com Reproduction Prohibited www.indital.com SCROLLS Quick Reference # 7 2011 5 Art. 687/3 New Items New Items Steel Tubular Art. 630/1 Mtl 3/4” x 3/8” sq. W 4 1/2” x H 13 3/16” Wt. 3.04 lbs. Art. 650/1 Art. 650/2 Art. 650/3 Art. 650/4 Mtl 1/2” dia. Mtl 1/2” dia. Mtl 1/2” dia. Mtl 1/2” dia. W 5 1/8” x H 15” W 5 5/16” x H 14 3/16” W 4 3/4” x H 9 1/4” W 5 5/16” x H 10 1/16” Wt. 0.81 lbs. Wt. 0.81 lbs. Wt. 0.74 lbs. Wt. 0.74 lbs. Art. 630/3 Mtl 3/4” x 3/8” sq. W 4 1/2” x H 10 1/4” Art. 630/4 Wt. 2.73 lbs. Mtl 3/4” x 3/8” sq. Art. 630/5 Art. 630/6 W 4 3/4” x H 7 1/2” Mtl 3/4” x 3/8” sq. Mtl 3/4” x 3/8” sq. Wt. 3.75 lbs. W 3 15/16” x H 4 3/4” W 3 1/8” x H 5 1/8” Wt. 1.21 lbs. Wt. 1.06 lbs. Art. 658/1 Art. 658/2 Mtl 1/2” sq. Mtl 1/2” sq. W 9 1/2” x H 15 3/4” W 9 1/2” x H 13 13/16” Wt. 2.64 lbs. Wt. 2.42 lbs. Shown: 658/2, 658/1 Art. 92/C/4 Art. 92/C/5 Left Right Mtl 1/2” x 1/4” Mtl 1/2” x 1/4” W 4 13/32” x H 20 1/16” W 4 13/32” x H 20 1/16” Wt. 1.1 lbs. Wt. 1.1 lbs. Art. 658/4 Mtl 1/2” sq. W 7 7/8” x H 18 1/8” SCROLLS Wt. 2.64 lbs. 6 ARTEFERRO by 6 www.indital.com Reproduction Prohibited www.indital.com New ItemsNew Items Steel Tubular Shown: 651/3 Art. 651/4 Art. 651/3 Art. 651/1 Art. 651/2 Mtl 1/2” sq. Mtl 1/2” sq. Mtl 1/2” sq. Mtl 1/2” sq. W 5 1/8” W 5 5/16” W 4 23/32” W 5 5/16” H 14 31/32” H 14 3/16” H 9 1/4” H 10 1/16” Wt. 0.58 lbs. Wt. 0.57 lbs. Wt. 0.52 lbs. Wt. 0.53 lbs. Shown: 24/F/2 ARTEFERRO Art. 24/F/2 Mtl 1/2” sq. W 11 13/16” x H 8 21/32” ARTEFERRO Wt. 4.36 lbs. ” 3 15/16” 9/32 6 SCROLLS Art. 1143/1 Art. 1143/2 Art. 1145/3 Mtl 1/2” sq. Mtl 1/2” sq. Mtl 1/2” sq. W 8 15/32” x H 7 1/2” W 7 9/32” x H 11 13/16” W 12 13/32” x H 6 11/16” Wt.
Load more

Recommended publications
  • Reduce Reuse Recycle Remanufacture
    STEEL - THE PERMANENT MATERIAL IN THE CIRCULAR ECONOMY AR ECONOMY BEN CUL EFI CIR TS E R R C E a U U w n D S m io E E a t t c R e u r i d a e l r s s c n o o n i s s s e i r v m a e t i 2 o O n C E n o E R i f t f U a ic R v o ie T n E n c C In y C Y FA C U LE N MA RE ts Jo duc bs pro Durable 1 CONTENTS Steel in the circular economy 3 Steel is essential to our modern world 5 Reduce 7 Decreasing the amount of material, energy and other resources used to create steel and reducing the weight of steel used in products. Use and reuse 11 Reuse is using an object or material again, either for its original purpose or for a similar purpose, without significantly altering the physical form of the object or material. Remanufacture 15 The process of restoring durable used steel products to as-new condition. Recycle 19 Melting steel products at the end of their useful life to create new steels. Recycling alters the physical form of the steel object so that a new application can be created from the recycled material. End notes 22 2 STEEL IN THE CIRCULAR ECONOMY A sustainable circular economy is one in which steel is fundamental to the circular economy. society reduces the burden on nature by ensuring The industry is continuing to expand its offer resources remain in use for as long as possible.
    [Show full text]
  • Higher-Quality Electric-Arc Furnace Steel
    ACADEMIC PULSE Higher-Quality Electric-Arc Furnace Steel teelmakers have traditionally viewed Research Continues to Improve the electric arc furnaces (EAFs) as unsuitable Quality of Steel for producing steel with the highest- Even with continued improvements to the Squality surface finish because the process design of steelmaking processes, the steelmaking uses recycled steel instead of fresh iron. With over research community has focused their attention 100 years of processing improvements, however, on the fundamental materials used in steelmaking EAFs have become an efficient and reliable in order to improve the quality of steel. In my lab steelmaking alternative to integrated steelmaking. In at Carnegie Mellon University, we have several fact, steel produced in a modern-day EAF is often research projects that deal with controlling the DR. P. BILLCHRIS MAYER PISTORIUS indistinguishable from what is produced with the impurity concentration and chemical quality of POSCOManaging Professor Editorof Materials integrated blast-furnace/oxygen-steelmaking route. steel produced in EAFs. Science412-306-4350 and Engineering [email protected] Mellon University Improvements in design, coupled with research For example, we recently used mathematical developments in metallurgy, mean high-quality steel modeling to explore ways to control produced quickly and energy-efficiently. phosphorus. Careful regulation of temperature, slag and stirring are needed to produce low- Not Your (Great-) Grandparent’s EAF phosphorus steel. We analyzed data from Especially since the mid-1990s, there have been operating furnaces and found that, in many significant improvements in the design of EAFs, cases, the phosphorus removal reaction could which allow for better-functioning burners and a proceed further.
    [Show full text]
  • Metal Handrail Designs a Beautiful Custom Handrail System Is Often the Main Distinguishing Element of a Staircase
    From Inspiration to Installation Ornamental Metal Handrail Designs A beautiful custom handrail system is often the main distinguishing element of a staircase. The enhancement of a hand forged metal handrail system is sure to give you an elegant staircase for your residence or commercial space, from inspiration to installation. *Cover image photographed by Greintime Productions. National 800.874.8408 | Atlanta 770.888.7333 | Charlotte 704.357.1221 Raleigh 919.861.4695 | Phoenix 602.437.5652 | Tucson 520.624.6554 Washington, D.C. 703.661.3300 | a r ti s ti c s t a i r s - u s . c om Take staircase handrail design to the next level. HANDRAIL DESIGN A well designed staircase is an integral part of interior design. It is often the first piece of furniture seen by guests. An ornamental metal handrail will truly take your staircase to the next level. HAND FORGED WELDING Our team of artisan welders and old world craftsman will make your ornamental metal handrail system a one-of-a-kind work of art. Each system is manufactured in our state-of-the-art metal fabrication facilities. 1 Make a statement with hand forged handrail designs. Make a statement. An ornamental metal handrail system speaks pure elegance. With over 30 years of experience, Southern Staircase has the skill and capability to deliver the highest quality hand forged iron handrail systems, delivering ultimate perfection to your home or commercial building. From traditional to modern, curved to straight, our skilled craftsmen will work closely with you to ensure we bring your vision to life.
    [Show full text]
  • STEEL in the CIRCULAR ECONOMY a Life Cycle Perspective CONTENTS
    STEEL IN THE CIRCULAR ECONOMY A life cycle perspective CONTENTS Foreword 3 The circular economy 4 Life cycle thinking 6 The life cycle assessment (LCA) approach 8 worldsteel’s LCA methodology and life cycle inventory (LCI) database 10 Sustainability and life cycle assessment 12 LCA in the steel industry 14 LCA by life cycle phase 15 Raw materials and steel production 15 Markets for by-products 16 Manufacturing and use 16 Reuse and remanufacturing 18 Recycling 19 LCA initiatives 20 Regional and global initiatives 21 Market sector initiatives 22 Construction 22 Automotive 24 Packaging 25 End notes 28 Glossary 29 Cover image: Steel staircase, office building, Prague, Czech Republic Design: double-id.com FOREWORD We live in a rapidly changing world with finite resources. Too many legislative bodies around the world At the same time, improvements in standards of living still enact regulations which only affect the “use and eradication of poverty, combined with global phase” of a product’s life, for example water and population growth, exert pressure on our ecosystems. energy consumption for washing machines, energy consumption for a fridge or CO2 emissions whilst As steel is everywhere in our lives and is at the heart driving a vehicle. This focus on the “use phase” can of our sustainable future, our industry is an integral part lead to more expensive alternative lower density of the global circular economy. The circular economy materials being employed but which typically have a promotes zero waste, reduces the amount of materials higher environmental burden when the whole life cycle used, and encourages the reuse and recycling of is considered.
    [Show full text]
  • The Stainless Steel Family
    The Stainless Steel Family A short description of the various grades of stainless steel and how they fit into distinct metallurgical families. It has been written primarily from a European perspective and may not fully reflect the practice in other regions. Stainless steel is the term used to describe an extremely versatile family of engineering materials, which are selected primarily for their corrosion and heat resistant properties. All stainless steels contain principally iron and a minimum of 10.5% chromium. At this level, chromium reacts with oxygen and moisture in the environment to form a protective, adherent and coherent, oxide film that envelops the entire surface of the material. This oxide film (known as the passive or boundary layer) is very thin (2-3 namometres). [1nanometre = 10-9 m]. The passive layer on stainless steels exhibits a truly remarkable property: when damaged (e.g. abraded), it self-repairs as chromium in the steel reacts rapidly with oxygen and moisture in the environment to reform the oxide layer. Increasing the chromium content beyond the minimum of 10.5% confers still greater corrosion resistance. Corrosion resistance may be further improved, and a wide range of properties provided, by the addition of 8% or more nickel. The addition of molybdenum further increases corrosion resistance (in particular, resistance to pitting corrosion), while nitrogen increases mechanical strength and enhances resistance to pitting. Categories of Stainless Steels The stainless steel family tree has several branches, which may be differentiated in a variety of ways e.g. in terms of their areas of application, by the alloying elements used in their production, or, perhaps the most accurate way, by the metallurgical phases present in their microscopic structures: .
    [Show full text]
  • Vinylpost & Railing
    TM Vinyl Post &LIFETIME Railing WARRANTY p_spp0100 020110 1. Quality Always . All railing systems are 100% vinyl Quality First . Never need painting . Won’t rot, crack, or peel . No splinters . Choose from fourteen styles or mix and match . Boxed, they are available in: 36” or 42” height and 4’, 6’, 8’, or 10’ length or 32˚ - 36˚ step in 4’, 6’, 8’ length . Porch posts and newel posts are sold seperately . Custom lengths are available . Gates are available in all sizes . Easy installation . Alluminum reinforced top and Choose from a selection of neutral colors that will While there is a broad selection of bottom rails for added strength compliment your residential or commercial property boxed sections, railing can be custom cut to your specications. All railing parts are precut to exact size. Routed holes are consistent White Grey Tan Clay Almond and sized with close tolerance providing not only great t but a quality look, as well. We use only aluminum channels for LIFETIME WARRANTY reinforcements and stainless steel screws Custom radiuses are available *The pictures and products contained Superior Systems has been designing vinyl in this booklet are proprietary and 1000 Series T-Rail products for over 20 years and is commited to cannot be copied or used without or 3000 Series developing innovative products that are not only the explicit written permission of Newport and built to last, but are also easily installed and Superior Plastic Products Inc. your choice of 1. baluster maintenance - free. Classic styling & crisp detail for the look of your choice Quality Always . All railing systems are 100% vinyl .
    [Show full text]
  • Arch, Rectangular & Contour Baluster
    Arch, Rectangular & Contour Baluster - INSTALLATION INSTRUCTIONS Balustre cintré, rectangulaire ou profilé - DIRECTIVES D’INSTALLATION Balaustres Arqueados, Rectangulares y Curvos - INSTRUCCIONES DE INSTALACIÓN Kit Contents Items You Will Need: • 14 - Aluminum balusters • Drill driver • Safety glasses • 56 - Color-matched screws • Tape measure • Carpenter’s pencil • Kit contents builds one 6’ • 2 pt. square head drill bit on-center section of handrail Contenu : Matériel nécessaire : • 14 - Balustres en aluminium • Perceuse • Lunettes de sécurité • 56 - Vis de même couleur • Ruban à mesurer • Crayon de menuisier • * L’ensemble permet de construire une • Une mèche à tête carrée de calibre 2 rampe de 1,83 m (6 pi) de centre à centre. Contenido del Juego: Elementos que necesitará: • 14 - Balaustres de aluminio • Taladro destornillador • Gafas de seguridad • 56 - Tornillos de colores combinados. • Cinta para medir • Lápiz de carpintero • *El contenido del juego forma una • Broca para taladro con cabezal sección central de 6’ del pasamanos cuadrado de 2 puntos Prior to construction, check with your local regulatory agency for special code requirements in your area. Common railing height is 36”. Structural support should come from either the continuation of deck support posts that extend up through the deck floor or railing posts that are bolted to the inside of the rim or outer joist. Never span more than 6’ between railing posts. Avant de commencer les travaux, consultez l’organisme de réglementation le plus près de chez vous pour prendre connaissance des exigences particulières en matière de construction en vigueur dans votre région. Habituellement, la hauteur d’une rampe est de 91 cm (36 po).
    [Show full text]
  • Deep Textured Architectural Metals Custom Fabricated Products Contents
    Deep Textured Architectural Metals Custom Fabricated Products contents 4 interior panels 6 exterior panels 8 patterns 10 panel systems 14 fabrication 15 color and tile finishes 16 finishes 18 Trim-Tex™ 19 Rigi-Grip™ 20 partitions 21 elevators 22 Rigi-Bump™ 24 sustainability 26 textured perforations 27 technical data 2 metal made better who we are As the originator and world leader of deep textured metals, Rigidized® Metals manufactures lasting impressions. We continue to explore the world of textures, finishes, forms and shapes to enhance the performance of all metals. For over seventy years our journey has allowed us to develop a one-of- a-kind expertise in how metals can be improved. Many discoveries have created imaginative products and some surprising applications. We strive to use less & give you more. A proud American manufacturer of metal products since 1940. metal made better 3 interiors Nordstrom Cafe 1HM Pattern in Copper Coastline Design Metal Made Better We make metals for interior surfaces richer with textures that reflect the glow of light. These patterned metals offer significantly more durable, longer lasting 1NA Pattern in Stainless Steel surfaces. 4 metal made better interiors Grand Junction Readiness Center Courtesy of CooverClark Architects 1NA 304 Stainless Steel Powder Coated “Brass Transparent” 6WL Column Covers metal made better 5 exteriors 6WL Pattern ZGF Architects-Twelve West, Portland, OR ZGF Architects-Twelve West, Portland, OR 6 metal made better exteriors 1UN Pattern Sherbourne Common Park, Toronto, Ontario Javits Convention Center, FXFOWLE Architects Metal Made Better Our Rigidized® Metals for exterior applications are uniquely durable, long lasting, luminescent, and visu- ally appealing.
    [Show full text]
  • Architectural Metals: Cast Iron, Steel, Pressed Tin, Copper, Aluminum and Zinc
    CITY OF GRANBURY Historic Preservation DESIGN GUIDELINES 10. ARCHITECTURAL METALS: CAST IRON, STEEL, PRESSED TIN, COPPER, ALUMINUM AND ZINC Evaluate the overall condition of architectural metals to determine whether more protection and maintenance may be required and if repairs are warranted. Most architectural features on Granbury's historic buildings were made of pressed tin. Most hardware on Granbury's historic buildings (before 1930) were made of brass, bronze and/or copper. Identify and Retain architectural metal features, such as columns, pilasters, soffits, cornices, capitals, window frames, awnings or stairways that are important to defining the historic character of a building, its finishes and colors. Protect and Maintain architectural metals from corrosion by providing proper drainage, preventing water from standing on horizontal surfaces or accumulating in curved, decorative features. Clean architectural metals, when necessary, to remove corrosion prior to repainting or applying other appropriate protective coatings. Do not remove historic patinas found on some metals such as copper or bronze. This will diminish the metal's historic character and may damage it. Prohibited: ¦ Removing or radically changing architectural metal features, so that, as a result, their character is diminished. ¦ Removing a major portion of the historic architectural metal from a facade instead of repairing or replacing only the portion(s) of deteriorated metal. ¦ Radically changing a metal’s type of finish, patina, historic color or accent theme. ¦ Failing to identify, evaluate and treat the causes of corrosion, like moisture from leaking roofs or flashing. ¦ Placing incompatible metals together without first providing a reliable separation material, thus causing a galvanic or corrosive reaction, and damaging the adjacent metals.
    [Show full text]
  • Used Motor Oil and Filter Recycling Guide
    USED MOTOR OIL & FILTER RECYCLING LEARN MORE Used Motor Oil and Oil Filter Recycling Guide Used Motor Oil is a Hazardous Waste Used motor oil is a hazardous waste that should never be put in the garbage or dumped in the storm drains or on the ground. Just one quart of motor oil can contaminate 250,000 gallons of water, creating health risks and environmental impacts across our community. Recycling is Free and Easy Used motor oil can be refined and Recycling right is more than an individual choice - it is part of how we are all reconditioned to become usable again. Paper, making a difference for a cleaner Oakland and more livable neighborhoods. steel, and plastic from used oil filters can also With your participation, Oakland’s Zero Waste program strives to divert all be recycled. recyclable and compostable material away from our landfills. There are three options for recycling used Your used motor oil recycling team is a partnership between the City of motor oil and filters: Oakland, California Waste Solutions, and CalRecycle. Our commitment to you is to provide the services and information you need to recycle right. 1. Curbside residential recycling pickup 2. Certified Collection Center drop-off locations When you pledge to recycle right, we’re here to help. 3. Household Hazardous Waste (HHW) collection facility Oaklanders Recycle No matter where you live in the City, there is a free and easy recycling option Contacts and Important Phone Numbers close to you. Visit recycleusedoil.org to find a location near you. California Waste Solutions ...............................................................(510) 625–5263 Used Motor Oil & Filters Improper Disposal is Illegal Disposal [email protected] www.calwaste.com 我們講中文 Hablamos español When you dispose hazardous materials properly, it benefits Household Hazardous Waste Drop Off ......................................
    [Show full text]
  • Steelmaking by Electric Arc Furnaces Cleaner, More Efficient
    EVRAZ Canadian Steel: Low Carbon Footprint November 2016 Electric Arc Furnaces (EAFs) with metal scrap: cleaner, more efficient • EVRAZ Regina utilizes two Electricity Steelmaking EAFs to make up to 1.1 Generation million tons of steel per Energy used CO2 emissions CO2 emissions year kg / ton of steel kWh / ton of steel grams / kWh -79% • Over 91% of steelmaking -64% -81% 2,081 in China is from Blast 4,624 764 Oxygen Furnaces (BOFs), which use iron ore, coking coal, and other inputs • For every one ton of steel scrap made into new steel, over 1,400kg of iron ore, 1,647 740kg of coal, and 120kg 441 147 of limestone are saved Overseas input shipping to China Blast EAF Blast EAF China Canada Furance Furnace Sources: BOF percentage: Worldsteel. Shipping emissions: National Technical University of Athens. Steelmaking: Midrex – Blast Furnace assuming 11% Scrap, EAF Use of 100% scrap. Scrap statistics: Worldsteel. Electricity Generation: IEA 2011 2 EVRAZ cleaner EAFs, Canada’s power generation outpace others Emissions from Steelmaking emissions and energy use energy generation Energy used CO2 emissions CO2 emissions kg / ton of steel kWh / ton of steel grams / kWh -79% -64% 2,081 4,624 -81% 764 1,526 3,419 2,327 476 470 929 1,647 441 147 China Germany Turkey EVRAZ Blast GermanyTurkey EAF China Turkey Germany Canada - BOF Canada Furnace - EAF - China Overseas shipping of inputs Sources: BOF percentage: Worldsteel. Shipping emissions: National Technical University of Athens, from China to BC, Europe to Houston. Steelmaking: Midrex – Blast Furnace assuming 11% Scrap, EAF Use of 100% scrap.
    [Show full text]
  • SPECIFYING STOCK COMPONENTS for ARCHITECTURAL METAL WORK
    • About the Instructor • About the Sponsor • Ask an Expert SPECIFYING STOCK COMPONENTS for ARCHITECTURAL METAL WORK Architectural Metals, Railing Systems, and Engineering Information This Online Learning Seminar is available through a professional courtesy provided by: Julius Blum & Co., Inc. P.O. Box 816 Carlstadt, NJ 07072 Toll‐Free: 800‐526‐6293 Tel: 201‐438‐4600 (local NJ) Fax: 201‐438‐6003 Email: [email protected] Web: www.juliusblum.com START ©2013 Julius Blum & Co., Inc. The material contained in this course was researched, assembled, and produced by powered by Julius Blum & Co., Inc. and remains its property. Questions or concerns about the content of this course should be directed to the program instructor. This multimedia product is the copyright of AEC Daily. ©2013 ∙ Table of Contents Slide 1of 70 • About the Instructor • About the Sponsor • Ask an Expert SPECIFYING STOCK COMPONENTS for ARCHITECTURAL METAL WORK Presented by: Julius Blum & Co., Inc. P.O. Box 816. Carlstadt, NJ 07072. Description: The course includes a discussion on: how to choose the best material for your job; available systems and their components; engineering data and the formulas to provide safe installations. To ensure the accuracy of this program material, this course is valid only when listed on AEC Daily’s Online Learning Center. Please click here to verify the status of this course. If the course is not displayed on the above page, it is no longer offered. The American Institute of Architects ∙ Course No. AEC659 ∙ This program qualifies for 1.0 LU/HSW Hour. AEC Daily Corporation is a Registered Provider with The American Institute of Architects Continuing Education Systems (AIA/CES).
    [Show full text]