20-20 Design

254"

10" 32" 120" 32" 60"

W3639 2AM1 CVGRB.C29M W3612BUTT W3639 2AM1 W3039 2016 PHOTOGRAPHY BROAN CVGRB.C29M FPEB WA2439R E6036SS HAFELE THE SOON-TO-BE EMPTY NESTERS TWISTER B18L.FH BD18.3 BPPS36 KITCHENAID BD18.3 B18R.FH 18" LEFT KRAFTMAID CABINETRY RD1239NH.W FPEB RTKL CD18 STDW KGCC706RSS KS18 FPEB RTKR COMPANION RD2430NH.B 36" EZR 3 DP24.4 2ADD CORNER RALSTON CHERRY CDK18 2DROT DRAWER SIDE OPEN FPEB RTKL CANNON GREY DOOR LEFT W1539L *RALSTON MAPLE RD1239NH.W 18" TECH 15" WALL K-CUP CHAI RD2430NH.B DRAWER ORGANIZER 18" RIGHT DRPD - DELUXE RECESSED DRAWER COMPANION CORNER HARDWARE: W1539R 40 - 7132.BB BALUSTER PULL DOORS 43 - 7132.BB BALUSTER PULL DRAWERS 108" 3 - 7136.BB BALUSTER PULL REFRIGERATOR WTEP93 TOP MOLDING: 6 - LSTCM8 WR3621BUTT B24L 6 - S3S1 BWBT 24" DACOR WPL4896 SB36BUTT.W RTKL RTKR RDW24 (2) APDRNH.W (2) U-SHAPED ROT'S WTCD24 BOTTOM MOLDING: APDRNH.B WSK4848 BCSRK24 WSK4848 4 - STLR8 (2) RD1830NH.B (2) RD1830NH.B 1 36" 8 TOE KICK MOLDING:

0 10 - WMTK8 " B1812L.FH BPPS36 BPPS36 B1812R.FH RTKL RD12 RD12 RTKR LIGHTING: 4 - LED.TPL.KIT

MSP362493R MISCELLANEOUS: 6 - SM8 236" 2 - TUK 2 - *TUKC29

236" 2 - QST CANNON GREY ISLANDS TO BE MOBILE 2 - *QPC29 OC302493.D 12 - MSBM8 (FOR CEILING GRID) 5TD FPEB 12 - *MSBM8 (FOR CEILING GRID) RTKR OTK30D MAKE WALL MOBILE

B9 TOP BPPS30 B9 TOP RD2433NH.W KITCHENAID DRAWER PWD DRAWER RD2456NH.B KEBK276BSS (2) PSP3X3.34 BMS18R. B18L.FH (2) WWEP30 KITCHENAID (2) PSP3X3.34 DXROT ROTDK18.24 (2) RD0930NH.B KOWT100ESS (2) WWEP30

36" W3030 CVGRB.C29M (2) RD0930NH.B 2AM1 W3030 CVGRB.C29M (2) PSP3X3.34 2AM1

(3) VGRPL48.34

2 "

109 2 "

4 "

2016 FLOOR PLAN Drawing #: 1 Scale : 0 5/16" = 1' 254"

10" 32" 6" 6" 32" 6"

3 3 3 1 4 " 4 " 1 4 " 47 4 " 36" 36" 36" 42 2 " 30" 24"

RD1239NH.W: "

3 4 ATTACH TO RIGHT OF W3639 A FROM INSIDE THE CABINET. 11 " ALIGN WITH TOP AND BOTTOM 1 4 OF CABINET DOOR. 3 W3612BUTT RD1239NH.W: W3639 2AM1 ATTACH TO LEFT OF W3039 W3639 2AM1 CVGRB.C29M FROM INSIDE THE CABINET. CVGRB.C29M BROAN ALIGN WITH TOP AND BOTTOM W3039 WA2439R E6036SS FPEB OF CABINET DOOR. 39" HAFELE TWISTER RD2430NH.B: ATTACH TO RIGHT OF B18R.FH FROM INSIDE THE CABINET. ALIGN WITH TOP AND BOTTOM OF CABINET DOOR AND DRAWER. 108" B RD1239NH.W RD1239NH.W RD2430NH.B:

18" KITCHENAID RD2430NH.B RD2430NH.B ATTACH TO LEFT OF 18"W KGCC706RSS COMPANION CABINET FROM INSIDE "

1 2 THE CABINET. ALIGN WITH TOP

1 AND BOTTOM OF CABINET DOOR 18" LEFT AND DRAWER. COMPANION BPPS36 BD18.3 B18R.FH 36" EZR 3 CORNER B18L.FH BD18.3 STDW KS18 FPEB RTKR DRAWER " FPEB RTKL 1 2 FPEB RTKL CD18 2ADD CDK18 2DROT SIDE OPEN DP24.4 18" TECH 34 DOOR LEFT DRAWER

WMTK8

1 1 47 4 " 3 18" 18" 36" 18" 18" 3 42 2 " 3 18" 36" 4 " 4 " 4 "

2016 El 1 Drawing #: 1 Scale : 0 3/8" = 1' 236"

7 8 " 1 24" 15" 15" 36" 66" 23 8 " 32" 24"

" **INSTALLER TO BUILD FAUX 3 4 REFRIGERATOR BOX APPROX A 36"W X 72"H X 23 5/8"D WITH 11 " RECESSED TOE KICK AS FLOOR. 1 4

3 WPL4896 / (2) APDRNH.W / APDRNH.B: TRIM WPL TO 36"W X 67 1/2"H AND WR3621BUTT APPLY TO FRONT OF REFRIGERATOR 21" WA2439R W1539L W1539R BOX. EVENLY SPACE AND INSTALL APDRNH.W AND APDRNH.B DOORS HAFELE 15" WALL K-CUP OVER WPL INSTALL HARDWARE PRIOR 39" TWISTER ORGANIZER TO INSTALLING DOORS.

RD2433NH.W OTK30D: WPL4896 RD2456NH.B TRIM AS NEEDED AND INSTALL AGAINST FACE OF OC302496.D AROUND WALL (2) APDRNH.W MSP362493R OC302496.D OVENS.

108" 5TD FPEB B RTKR RD2433NH.W / RD2456NH.B: WTEP93 OTK30D 18" ATTACH TO RIGHT OF OC302496 FROM INSIDE THE CABINET. ALIGN WITH TOP "

1 2 KITCHENAID AND BOTTOM OF CABINET DOORS AND 72" 1 KEBK276BSS DRAWER.

36" EZR 3 18" RIGHT COMPANION

" DRAWER 1 2 CABINET APDRNH.B 34

WMTK8

3 36" 18" 7 36" 36" 30" 3 78 8 " 8 " 4 "

2016 El 2 Drawing #: 1 Scale : 0 3/8" = 1' WSK4848 ISLAND TO BE MOBILE WSK4848 (2) RD1830NH.B (2) RD1830NH.B "

1 2 WSK4848 / (2) RD1830NH.B:

1 TRIM WSK TO 34 1/2"W X 30"H AND ATTACH TO LEFT OF B24L. EVENLY SPACE AND INSTALL RD1830'S TO LEFT OF B24L FROM INSIDE THE B24L DACOR SB36BUTT.W BWBT 24" B24L AND B1812R IN EL 4. ALIGN WITH TOP AND " (2) U-SHAPED RTKR 1 2 RTKL RDW24 BOTTOM OF CABINET DOORS AND DRAWERS. WTCD24 ROT'S 34 BCSRK24 WSK4848 / (2) RD1830NH.B: TRIM WSK TO 34 1/2"W X 30"H AND ATTACH TO RIGHT OF BWBT24. EVENLY SPACE AND INSTALL WMTK8 RD1830'S TO RIGHT OF BWBT24 FROM INSIDE THE BWBT24 AND B1812L IN EL 4. ALIGN WITH TOP AND BOTTOM OF CABINET DOORS AND DRAWERS. 3 24" 24" 36" 24" 3 4 " 4 " 108"

WSK4848 ISLAND TO BE MOBILE WSK4848 (2) RD1830NH.B (2) RD1830NH.B "

1 2 WSK4848 / (2) RD1830NH.B:

1 TRIM WSK TO 34 1/2"W X 30"H AND ATTACH TO LEFT OF B1812L. EVENLY SPACE AND INSTALL B1812L.FH BPPS36 BPPS36 B1812R.FH RD1830'S TO LEFT OF B1812L FROM INSIDE THE RTKL RD12 RD12 RTKR B1812L AND BWBT24 IN EL 3. ALIGN WITH TOP AND "

1 2 BOTTOM OF CABINET DOORS AND DRAWERS.

34 WSK4848 / (2) RD1830NH.B: TRIM WSK TO 34 1/2"W X 30"H AND ATTACH TO RIGHT OF B1812R. EVENLY SPACE AND INSTALL WMTK8 RD1830'S TO RIGHT OF B1812R FROM INSIDE THE B1812R AND B24L IN EL 2. ALIGN WITH TOP AND BOTTOM OF CABINET DOORS AND DRAWERS. 3 18" 36" 36" 18" 3 4 " 4 " 108"

2016 PHOTOGRAPHY_EMPTY NESTERS_FINAL01.kit Drawing 1 Drawing #: 1 **INSTALLER TO BUILD TOE KICK BASE FOR ISLAND THAT IS 96"W X 6"D X 4 1/2"H TO BE CENTERED UNDER CABINETS IN ELEVATION 5. ISLAND TO BE MOBILE PSP3X3.34 PSP3X3.34: PSP3X3.34 INSTALL TO RIGHT OF W3030 IN EL 8, ALLOWING "

1 2 A 3/4" REVEAL BETWEEN FACE OF W3030 AND

1 FACE OF PSP AND FACE OF WWEP30 AND FACE B9 TOP B9 TOP BPPS30 OF PSP. DRAWER PWD DRAWER WWEP30 / RD0930NH.B: " WWEP30 B18L.FH BMS18R. WWEP30 TRIM WWEP TO 9 3/4"W AND INSTALL TO RIGHT OF 1 2 KITCHENAID RD0930NH.B ROTDK18.24 KOWT100ESS DXROT RD0930NH.B W3030 IN EL8 PULLING 1 3/8" FROM SIDE OF CABINET TO ALIGN WITH FACE FRAME OF B9. CENTER AND 34 INSTALL RD0930 OVER WWEP FROM BEHIND.

WWEP30 / RD0930NH.B: WMTK8 TRIM WWEP TO 9 3/4"W AND INSTALL TO LEFT OF W3030 IN EL6 PULLING 1 3/8" FROM SIDE OF CABINET 3 3 TO ALIGN WITH FACE FRAME OF B9. CENTER AND 9 4 " 9" 18" 30" 18" 9" 9 4 " 3" 3" INSTALL RD0930 OVER WWEP FROM BEHIND. 1 109 2 " PSP3X3.34: INSTALL TO LEFT OF W3030 IN EL 6, ALLOWING A 3/4" REVEAL BETWEEN FACE OF W3030 AND FACE OF PSP AND FACE OF WWEP30 AND FACE OF PSP.

2016 El 5 Drawing #: 1 Scale : 0 1/2" = 1' ISLAND TO BE MOBILE ISLAND TO BE MOBILE " 1 2 " 1 2 1

PSP3X3.34 1

W3030 PSP3X3.34 "

1 2 CVGRB.C29M " W3030 2AM1 1 2 CVGRB.C29M 34 2AM1 PSP3X3.34 34 PSP3X3.34 " 1 2 " 1 2 4

30" 4 3" 3" 30" 3" 3" 36" 36"

2016 PHOTOGRAPHY_EMPTY NESTERS_FINAL01.kit Drawing 3 Drawing #: 1 **INSTALLER TO BUILD TOE KICK BASE FOR ISLAND THAT IS 96"W X 6"D X 4 1/2"H TO BE CENTERED UNDER CABINETS IN ELEVATION 5.

(2) PSP3X3.34: INSTALL TO RIGHT OF W3030 IN EL 6, ALLOWING PART OF A 3/4" REVEAL BETWEEN FACE OF W3030 AND VGRPL4834 ISLAND TO BE MOBILE VGRPL4834 FACE OF LEFT PSP. RIGHT PSP TO BE ALIGNED (BEHIND PSP3X3.34) (BEHIND PSP3X3.34) WITH BACK CORNER OF W3030 IN EL6.

1 2 WWEP30 / RD0930NH.B:

1 TRIM WWEP TO 9 3/4"W AND INSTALL TO RIGHT OF VGRPL48.34 W3030 IN EL6 PULLING 1 3/8" FROM SIDE OF CABINET TO ALIGN WITH FACE FRAME OF B9. CENTER AND (2) PSP3X3.34 (2) PSP3X3.34 INSTALL RD0930 OVER WWEP FROM BEHIND. " WWEP30 1 2 WWEP30 RD0930NH.B RD0930NH.B (3) VGRPL48.34: TRIM INTO FOUR PIECES. THE FIRST TWO PIECES TO 34 BE 40 3/8"W X 30"H. THE SECOND TWO PIECES TO BE 7 7/8"W X 30"H. CENTER AND INSTALL 40 3/8"W PIECES AGAINST BACK OF CABINETS IN EL5. 7 7/8" WIDE PIECES TO BE INSTALL ALONG BACK OF W3030 IN EL6 AND EL8 PULLING OUT FROM CABINETS 1 7/8" LEAVING A 3/4" 3 3 9 4 " 78" 9 4 " REVEAL BETWEEN FACE OF PANEL AND PSP3X3.34 3" 3" 3" 3" WWEP30 / RD0930NH.B: TRIM WWEP TO 9 3/4"W AND INSTALL TO LEFT OF W3030 IN EL8 PULLING 1 3/8" FROM SIDE OF CABINET TO ALIGN WITH FACE FRAME OF B9. CENTER AND INSTALL RD0930 OVER WWEP FROM BEHIND.

(2) PSP3X3.34: INSTALL TO LEFT OF W3030 IN EL 8, ALLOWING A 3/4" REVEAL BETWEEN FACE OF W3030 AND FACE OF RIGHT PSP. LEFT PSP TO BE ALIGNED WITH BACK CORNER OF W3030 IN EL8.

2016 El 7 Drawing #: 1 Scale : 0 1/2" = 1' 224" 30"

SOFFIT HEIGHT - 11 3/4" 236" 236" MAKE WALL MOBILE

30" 30"

2016 MISC 1 Drawing #: 1 Scale : 0 1/4" = 1' DP24.4: CENTER AND INSTALL IN MIDDLE DRAWER OF BD18.3 HAFELE RUNNING FROM FRONT TO BACK. TWISTER CDK18: CD18 KS18 TECH 2ADD INSTALL IN MIDDLE DRAWER OF BD18.3. DP24.4 CDK18 2DROT DRAWER TECH DRAWER: INSTALL IN DRAWER OF 18"W COMPANION CABINET. WALL K-CUP ORGANIZER HAFELE TWISTER: INSTALL IN WA2439R ACCORDING TO MANUFACTURERS DIRECTIONS. DISCARD WOOD SHELVES INCLUDED WITH CABINET.

WALL K-CUP ORGANIZER: INSTALL IN BOTTOM OF W1839L.

BCSRK24: INSTALL AT FLOOR OF B24L. DISCARD WOOD SHELVES INCLUDED WITH CABINET. BWBT 24" WTCD24 U-SHAPED ROT'S BCSRK24 RTKR U-SHAPED ROT'S: TO BE INSTALLED IN SB36BUTT.W. PLACEMENT TO BE DETERMINED ON SITE.

ALL REMAINING ITEMS ARE FACTORY INSTALLED.

MSP362493R

5TD

BMS18R. ROTDK18.24 DXROT

2016 STORAGE Drawing #: 1 Scale : 0 5/16" = 1' LED.TPL.KIT: TRIM TAPE LIGHT AS NEEDED AND INSTALL INSIDE GLASS DOORS CABINETS. TAPE LIGHT TO BE INSTALLED ALONG CABINET SIDE BEHIND FACE FRAME FACING CENTER OF CABINET.

LED.TPL.KIT: TRIM TAPE LIGHT AS NEEDED AND INSTALL ALONG BACK OF LIGHT RAIL MOLDING.

2016 LIGHTING Drawing #: 1 Scale : 0 5/16" = 1' TOP MOLDING DETAIL A FRONT AND SIDE WITH DOORS

LSTCM8 DOOR CABINET FRAME BLOCKING 2 1/2" 3 1/4" S3S1 3/4" STLR8 1 5/8" ALIGN CABINET DOOR FRAME

BOTTOM MOLDING DETAIL B FRONT AND SIDE W/ DOORS

TOP MOLDING DETAIL A SIDE NO DOORS

CABINET LSTCM8 SIDE

BLOCKING 2 1/2" 3 1/4" S3S1 1 5/8" 3/4" STLR8 1/4" CABINET SIDE

BOTTOM MOLDING DETAIL B SIDE NO DOORS

2016 MOLDING Drawing #: 1 Scale : 0 1/2" = 1' REFRIGERATOR HARDWARE PLACEMENT CENTERLINE TO BE DETERMINED ON SITE. OF DRAWER

CENTERLINE CENTERLINE WALL DOORS OF STILE OF DOOR 12"-24" W DRAWERS 3" CENTERLINE OF RAIL

30"W DRAWERS

7 1/2" CENTERLINE OF DRAWER

3" CENTERLINE 36"W DRAWERS OF STILE BASE DOORS BASE PULL OUT

9" CENTERLINE OF DRAWER

2016 HARDWARE Drawing #: 1 Scale : 0 3/8" = 1' 110" 55"

COOKTOP CUTOUT ON JOB SITE. TEMPLATE PROVIDED 25" BY COOKTOP MANUFACTURER. 54"

110"

SINK CUTOUT ON JOB SITE. TEMPLATE PROVIDED THIS DRAWING IS FOR CONCEPT USE ONLY. BY SINK MANUFACTURER. ALL DIMENSIONS NEED TO BE FIELD VERIFIED FROM THE INSTALLED CABINETRY. IT IS THE RESPONSIBILITY OF THE COUNTERTOP 38" FABRICATOR TO FIELD VERIFY ALL DIMENSIONS BASED ON MATERIAL TYPE AND SPECIFICATIONS.

1 111 2 " 38"

2016 COUNTERTOP Drawing #: 1 Scale : 0 3/8" = 1' 1 109 4 "

64"L

36"L 64"L

64"L 48"L 48"L

48"L 64"L

48"L 96"L 114"

48"L 64"L

64"L 48"L 64"L

48"L 36"L

64"L

-CEILING GRID TO BE CENTERED OVER ISLANDS.

-LAYOUT TO BE CONFIRMED ON SITE PRIOR TO CONSTRUCTION.

2016 PHOTOGRAPHY_EMPTY FLOOR PLAN Drawing #: 1