DOCSLIB.ORG

Stair Catalog 2020 Update.Indd

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Stair Catalog 2020 Update.Indd Elegant-Rise Stair Systems KEIM STAIR CATALOG 4465 SR 557 | CHARM, OH 44617 | 330.893.2251 | WWW.KEIMHOME.COM 4465 SR 557 | PO Box 6 Charm, OH 44617 Phone: 330.893.2251 Quality Toll Free: 800.362.6682 Fax: 330.893.3325 Stairs Contents www.keimhome.com 1 3/4” Balusters . 4-21 1 1/4” Balusters . 22-27 HOURS Contemporary . .28 Monday 7am - 7pm Box Newel . .29 Tue.-Fri. 7am - 4:30pm Steps & Fittings . .30-33 Sat. 7:30am - Noon Accessories . 34 Custom . 35 Hardware & Tools . .36-37 HOME CENTER Planning & Guidelines . .38-39 Home Owners Do-it-yourself Hobbyists 125,000 Sq. Ft. Showroom MILLWORK SPECIALTY Wholesale Manufacturers Architectural Millwork In-Stock Trim & Doors Direct Line: 866.872.0500 Fax: 330.893.7039 WOODSHOP SUPPLY Servicing Professional Cabinet & Furniture Shops Direct Line: 330.893.5055 Toll Free: 866.542.5205 CONTRACTOR SALES Serving Builders Contractors New Home Sales “Add long-lasting beauty Drafting Services and value to your home.” Direct Line: 330.893.5065 Quality, Service, Integrity. KEIM IS PLEASED TO OFFER THE Elegant-Rise BALUSTER SYSTEM This system provides a graceful rise of the balusters as they ascend the stairway. OVER THE POST STAIR SYSTEM The lower blocks of the balusters follow the rise of the stairs, o ering an POST TO POST STAIR SYSTEM Elegant Clean look. WITH FITTINGS POST TO POST STAIR SYSTEM WITHOUT FITTINGS Keim o ers the ELEGANT-RISE Stair system in 11 rail profi les, with 12 baluster/newel designs in 5 profi les and two diameters. These stair parts can be combined in one of three di erent layouts: over the post, post to post with fi ttings, or post to post without fi ttings. CLOSED STAIR SYSTEM Keim o ers open or closed tread designs with bull nose or square cut starting steps. You can choose either full wood tread or false end treads (to be used with a carpet runner). Parts are available in Oak, Poplar, Cherry, Maple, or a number of other species, both domestic and exotic, as well as Prefi nished White. Whatever your stair design, Keim will provide quality stair parts from stock, the factory, or our custom mill. You'll be glad you used Keim's Elegant- Rise stair system. OPEN STAIR SYSTEM WITH CUSTOM STARTING STEP Hand Rail STANDARD OR CONECT-A-KIT™ FITTINGS AVAILABLE KLS6109 KLS6210 KLS6400 KLS6519 FILLET KLS6007 ¥⁄§¨" x 1¾ " SHOE RAIL KLS6109P1 KLS6210P KLS6400P KLS6519P KLS6006 2⅞ " x 2⅜ " 2⅜ " x 2⅝ " 2¼ " x 3⅓ ¢" 3" x 2⅝ " 1" x 3⅛ " NO FITTINGS AVAILABLE STANDARD FITTINGS AVAILABLE KLS6005 KLS6810 KLS6910 KLS6710 REEDED KLS6005P KLS6810P KLS6910P KLS6710P 1¾ " Balusters 2¥⁄§¨" x 2½ " 2¼ " x 2⅝ " 2⅜ " x 2⅝ " 2¾ " x 2⅝ " Balusters KLSR 2105 KLSR 2115 6¼ " 6¼ " 6¼ " 28" 19⅝ " 28" 19⅝ " 28" 19⅝ " REEDED DETAIL 16⅛ " 14" 12⅛ " 10" 8⅛ " 6" 34" 38" 42" 34" 38" 42" 4 ©2020 KEIM KEIMHOME.COM | 330.893.2251 REVISED MAY 2020 Newels 1" 1" 23" 23" 36" REEDED 24" 3½ " Newels KLSR5511 KLSR5515 48" 60" 3½" 3½" Starting Starting 3½" 5" 14½" 10" 3½" 5" 23" 16½" 19½" 23" 28½" 25½" 27" 16½" KLSR5548 KLSR5560 KLSR5546 KLSR5545 48" 60" 60" 60" Starting Starting Intermediate Second Landing Floor Landing 5 ©2020 KEIM REVISED MAY 2020 KEIMHOME.COM | 330.893.2251 Hand Rail STANDARD OR CONECT-A-KIT™ FITTINGS AVAILABLE KLS6109 KLS6210 KLS6400 KLS6519 FILLET KLS6007 5 3 /16" x 1 /4" SHOE RAIL KLS6109P1 KLS6210P KLS6400P KLS6519P KLS6006 1 2⅞ " x 2⅜ " 2⅜ " x 2⅝ " 2¼ " x 3⅓ ¢" 3" x 2⅝ " 1" x 3 /8" NO FITTINGS AVAILABLE STANDARD FITTINGS AVAILABLE KLS6005 KLS6810 KLS6910 KLS6710 KLS6910P KLS6710P KLS6005P KLS6810P 2⅜ " x 2⅝ " 2¾ " x 2⅝ " 1¾ " Balusters 2¥⁄§¨" x 2½ " 2¼ " x 2⅝ " Balusters KLS 2105 KLS 2115 KLS 2111 6¼ " 6¼ " 6¼ " 25½" 28" 19⅝ " 25½" 28" 19⅝ " 25½" 28" 19⅝ " 16⅛ " 16½" 14" 12⅛ " 12½" 10" 8⅛ " 8½" 6" 34" 38" 42" 34" 38" 42" 34" 38" 42" 6 ©2020 KEIM KEIMHOME.COM | 330.893.2251 REVISED MAY 2020 Newels 1" 1" 23" 23" 36" 24" 3½ " Newels KLS5511 KLS5515 48" 60" 3½" 3½" Starting Starting 3½" 5" 14½" 10" 3½" 5" 23" 16½" 19½" 23" 28½" 25½" 27" 16½" KLS5548 KLS5560 KLS5546 KLS5545 48" 60" 60" 60" Starting Starting Intermediate Second Landing Floor Landing 7 ©2020 KEIM REVISED MAY 2020 KEIMHOME.COM | 330.893.2251 Hand Rail STANDARD OR CONECT-A-KIT™ FITTINGS AVAILABLE KLS6109 KLS6210 KLS6400 KLS6519 FILLET KLS6007 5 3 /16" x 1 /4" SHOE RAIL KLS6109P1 KLS6210P KLS6400P KLS6519P KLS6006 1 2⅞ " x 2⅜ " 2⅜ " x 2⅝ " 2¼ " x 3⅓ ¢" 3" x 2⅝ " 1" x 3 /8" NO FITTINGS AVAILABLE STANDARD FITTINGS AVAILABLE KLS6005 KLS6810 KLS6910 KLS6710 OCTAGON 3 1 /4" Balusters KLS6005P KLS6810P KLS6910P KLS6710P 2¥⁄§¨" x 2½ " 2¼ " x 2⅝ " 2⅜ " x 2⅝ " 2¾ " x 2⅝ " Balusters KLSO 2005 KLSO 2015 7" 7" 7" 27¾ " 19®¯⁄§¨" 19®¯⁄§¨" 27¾ " 19®¯⁄§¨" 27¾ " OCTAGON DETAIL OCTAGON 15¯⁄§¨" 14¼ " 11¯⁄§¨" 10¼ " 7¯⁄§¨" 6¼ " 34" 38" 42" 34" 38" 42" 8 ©2020 KEIM KEIMHOME.COM | 330.893.2251 REVISED MAY 2020 Newels 1" 1" 1" 1" 27" 27" 27" 27" OCTAGON 32" 13" 3½ " Newels 20" 15" KLSO3010 KLSO3012 KLSO3011 KLSO3015 43" 41" 48" 60" Starting Turnout Starting Intermediate Landing 5" 5" 5" 1 5 /4 " 5¼" 10" 5" PA410 10" 14½ " 14½" 5¼ " 5¼" CA411 22½ " 17½ " 22½" 17½" PP412 17½ " 17½" 22½ " 22½" RCP413 CP414 23¼ " 23½ " 23¼" 23½" 19" 19" 15¼ " 15¼" OCT415 PB416 KLSO4130 KLSO4132 KLSO4135 KLSO4136 see page KLSO3040 KLSO3042 KLSO3045 KLSO3046 43" 51" 51" 51" 34 48" 56" 56" 56" Starting Starting 2nd Floor Intermediate Starting Starting 2nd Floor Intermediate Landing Landing Landing Landing 9 ©2020 KEIM REVISED MAY 2020 KEIMHOME.COM | 330.893.2251 Hand Rail STANDARD OR CONECT-A-KIT™ FITTINGS AVAILABLE KLS6109 KLS6210 KLS6400 KLS6519 FILLET KLS6007 ¥⁄§¨" x 1¾ " SHOE RAIL KLS6109P1 KLS6210P KLS6400P KLS6519P KLS6006 2⅞ " x 2⅜ " 2⅜ " x 2⅝ " 2¼ " x 3⅓ ¢" 3" x 2⅝ " 1" x 3⅛ " NO FITTINGS AVAILABLE STANDARD FITTINGS AVAILABLE KLS6005 KLS6810 KLS6910 KLS6710 TWIST 1¾ " Balusters KLS6005P KLS6810P KLS6910P KLS6710P 2¥⁄§¨" x 2½ " 2¼ " x 2⅝ " 2⅜ " x 2⅝ " 2¾ " x 2⅝ " Balusters KLST 2005 KLST 2015 7" 7" 7" 27¾" 19®¯⁄§¨" 27¾" 19®¯⁄§¨" 27¾" 19®¯⁄§¨" TWIST DETAIL TWIST 14¼" 15¯⁄§¨" 11¯⁄§¨" 10¼" 7¯⁄§¨" 6¼" 34" 38" 42" 34" 38" 42" 10 ©2020 KEIM KEIMHOME.COM | 330.893.2251 REVISED MAY 2020 Newels 1" 1" 1" 27" 1" 27" 27" 27" 32" TWIST 13" 20" 3½ " Newels 15" KLST3010 KLST3012 KLST3011 KLST3015 43" 41" 48" 60" Starting Turnout Starting Intermediate Landing 5" 5" 5" 5¼" 5¼" 10" 10" PA410 5" 14½" 14½" 5¼" 5¼" CA411 22½" 17½" 22½" 17½" PP412 22½" 17½" 17½" 22½" RCP413 CP414 23¼" 23½" 23¼" 23½" 19" 19" 15¼" 15¼" OCT415 PB416 KLST4130 KLST4132 KLST4135 KLST4136 see page KLST3040 KLST3042 KLST3045 KLST3046 43" 51" 51" 51" 34 48" 56" 56" 56" Starting Starting 2nd Floor Intermediate Starting Starting 2nd Floor Intermediate Landing Landing Landing Landing 11 ©2020 KEIM REVISED MAY 2020 KEIMHOME.COM | 330.893.2251 Hand Rail STANDARD OR CONECT-A-KIT™ FITTINGS AVAILABLE KLS6109 KLS6210 KLS6400 KLS6519 FILLET KLS6007 ⁄" x 1¾ " SHOE RAIL KLS6109P1 KLS6210P KLS6400P KLS6519P KLS6006 2⅞ " x 2⅜ " 2⅜ " x 2⅝ " 2¼ " x 3⅓ " 3" x 2⅝ " 1" x 3⅛ " NO FITTINGS AVAILABLE STANDARD FITTINGS AVAILABLE KLS6005 KLS6810 KLS6910 KLS6710 FLUTED 1¾ " Balusters KLS6005P KLS6810P KLS6910P KLS6710P 2⁄" x 2½ " 2¼ " x 2⅝ " 2⅜ " x 2⅝ " 2¾ " x 2⅝ " Balusters KLSF 2005 KLSF 2015 7" 7" 7" 27¾ " 19⁄ " 27¾ " ETAIL D 19⁄" 27¾ " LUTED F 19⁄" 15⁄" 11⁄" 14¼ " 10¼ " 7⁄" 6¼ " 34" 38" 42" 34" 38" 42" 12 ©2020 KEIM KEIMHOME.COM | 330.893.2251 REVISED MAY 2020 Newels 1" 1" 1" 27" 1" 27" 27" 27" 32" FLUTED 13" 20" 3½ " Newels 15" KLSF3010 KLSF3012 KLSF3011 KLSF3015 43" 41" 48" 60" Starting Turnout Starting Intermediate Landing 5" 5" 5" 5¼" 5¼" 10" 10" PA410 5" 14½" 14½" 5¼" 5¼" CA411 22½" 22½" 17½" 17½" PP412 22½" 17½" 17½" 22½" RCP413 CP414 23½" 23¼" 23½" 23¼" 19" 19" 15¼" 15¼" OCT415 PB416 KLSF4130 KLSF4132 KLSF4135 KLSF4136 see page KLSF3040 KLSF3042 KLSF3045 KLSF3046 43" 51" 51" 51" 34 48" 56" 56" 56" Starting Starting 2nd Floor Intermediate Starting Starting 2nd Floor Intermediate Landing Landing Landing Landing 13 ©2020 KEIM REVISED MAY 2020 KEIMHOME.COM | 330.893.2251 Hand Rail STANDARD OR CONECT-A-KIT™ FITTINGS AVAILABLE KLS6109 KLS6210 KLS6400 KLS6519 FILLET KLS6007 5 3 /16" x 1 /4" SHOE RAIL KLS6109P1 KLS6210P KLS6400P KLS6519P KLS6006 2⅞ " x 2⅜ " 2⅜ " x 2⅝ " 2¼ " x 3⅓ " 3" x 2⅝ " 1" x 3⅛ " NO FITTINGS AVAILABLE STANDARD FITTINGS AVAILABLE KLS6005 KLS6810 KLS6910 KLS6710 1¾ " Balusters KLS6005P KLS6810P KLS6910P KLS6710P 2⁄" x 2½ " 2¼ " x 2⅝ " 2⅜ " x 2⅝ " 2¾ " x 2⅝ " Balusters KLS 2005 KLS 2015 7" 7" 7" 19⁄" 27¾ " 19⁄" 27¾ " 19⁄" 27¾ " 15⁄" 14¼ " 11⁄" 10¼ " 7⁄" 6¼ " 34" 38" 42" 34" 38" 42" 14 ©2020 KEIM KEIMHOME.COM | 330.893.2251 REVISED MAY 2020 Newels 1" 1" 1" 27" 1" 27" 27" 27" 32" 13" 20" 3½ " Newels 15" KLS3010 KLS3012 KLS3011 KLS3015 43" 41" 48" 60" Starting Turnout Starting Intermediate Landing 5" 5" 5" 5¼" 5¼" 10" PA410 5" 10" 14½" 14½" 5¼" 5¼" CA411 22½" 22½" 17½" 17½" PP412 22½" 17½" 17½" 22½" RCP413 CP414 23¼" 23½" 23¼" 23¼" 19" 19" 15¼" 15¼" OCT415 PB416 KLS4130 KLS4132 KLS4135 KLS4136 see page KLS3040 KLS3042 KLS3045 KLS3046 43" 51" 51" 51" 34 48" 56" 56" 56" Starting Starting 2nd Floor Intermediate Starting Starting 2nd Floor Intermediate Landing Landing Landing Landing 15 ©2020 KEIM REVISED MAY 2020 KEIMHOME.COM |
Load more

Recommended publications
  • Product Catalog | Volume 2 | Volume Catalog Product
    Product Catalog | Volume 2 Catalog | Volume Product Hirsh® Product Catalog | Volume 2 Advantages Of Hirsh Products Hirsh Industries, LLC manufactures and supplies metal filing, storage and organizational products for personal and commercial use. We have a storage solution for any office need. Our products work together to provide a comprehensive, functional and stylish storage system. Hirsh has had an aggressive growth strategy through investment and expansion both organically as well as through acquisitions. Our expanding portfolio of value engineered products have applications in government, education and business markets. We pride ourselves on providing quality products that represent outstanding value to end users, supply chain excellence and world class customer service. Founded In 1924 A Broad Assortment Of Products Hirsh Industries has Commercial Grade File Cabinets operated continuously Hirsh’s commercial grade filing products offer premium features and unmatched value. since 1924 when it With added functionality and ergonomic design, these cabinets are welcome additions began as the W.P. to any office. All of our cabinets are built of steel and feature ball-bearing slides providing a long-lasting and durable product made for high-volume, daily use. Hirsh’s broad line of Johnson Company file cabinets include vertical, lateral and pedestal files. Affordable prices make these filing which specialized in products a great value and smart choice. Unmatched Value Quality Construction Premium Features metal fabrication. W.P. Johnson eventually Credenza Cabinets For small or large offices, the combination of our credenza cabinets offer a variety of open Practical solutions with Durable desking and Thoughtful designs narrowed its focus and closed configurations that support accessible and secured storage solutions.
    [Show full text]
  • TW-15 Typical Balcony/Breezeway Detail
    P.O. Box 1404 Joplin, MO 64802-1404 Typical Balcony/Breezeway Detail 800-641-4691 1 inch TW-15 All logos are cmyk tamkowaterproofing.com If needed, TAMKO red is PMS185 1.5 inch FINISHED WALL When to use:Or metal counterflashing at openings. page up to 6 inches = 1 inch TWM-1 MASTIC WEATHER RESISTANT BARRIER or other appropriate, page up to 12 inches = 1.5 inch Positioned to lap TW-60 12" flashing in shingle fashion. compatible sealant at page up to 18 inches = 2 inch membrane and metal page over 18 inches = 2.5 inch flashing terminations. TW-60 12" FLASHING 2 inch Positioned with 4" minimum on horizontal leg and PRIMED 26 GA. 2" minimum beyond vertical leg of metal flashing. The use of TW-60 18" Flashing is (MINIMUM) GALVANIZED recommended in regions that experience heavy snow fall and ice buildup. METAL L-FLASHING (4" × 4" MINIMUM) TW-60 SHEET WATERPROOFING MEMBRANE Prime metal flashing prior to TAMKO red is PMSPlywood 185, or OSB deck must be fully covered. installation with TWP-1 or CONCRETE which according to the TWP-2 primer. 2.5 inch logo standards breaks TWM-1 MASTIC down to be M100, Y80 or other appropriate, compatible sealant at TW-60 termination as a cant. ADHESIVE PRIMER* METAL FLASHING EXTRUDED ALUMINUM BALCONY EDGING (T-BAR) FASTENERS Cross-sectional shape varies. Fasten per Positioned 1" from the PLYWOOD or OSB DECK manufacturer’s recommendations. outside edges of the 1/4":12" minimum positive slope 1 inch flashing. Fastener type required away from wall to drain and and spacing as prevent ponding water.
    [Show full text]
  • CITY of SAN JOSE, CALIFORNIA Office of the Ci~, Clerk 200 East Santa Clara Street San Jos~, California 95113 Telephone (408) 535-1260 FAX (408) 292-6207 City Clerk
    CITY OF SAN JOSE, CALIFORNIA Office of the Ci~, Clerk 200 East Santa Clara Street San Jos~, California 95113 Telephone (408) 535-1260 FAX (408) 292-6207 City Clerk STATE OF CALIFORNIA) COUNTY OF SANTA CLARA) CITY OF SAN JOSE) I, Dennis Hawkins, City Clerk & Ex-Officio Clerk of the Council of and for the City of San Jose, in said County of Santa Clara, and State of California, do hereby certify that "Ordinance No. 29153", the original copy of which is attached hereto, was passed for publication of title on the 25th day of September, 2012, was published in accordance with the provisions of the Charter of the City of San Jose, and was given final reading and adopted on the 16th day of October, 2012, by the following vote: AYES: CAMPOS, CHU, CONSTANT, HERRERA, KALRA, LlCCARDO, NGUYEN, OLIVERIO, PYLE, ROCHA; REED. NOES: NONE. ABSENT: NONE. DISQUALIFIED: NONE. VACANT: NONE. Said ordinance is effective as of 16th day of November, 2012. IN WITNESS WHEREOF, I have hereunto set my hand and affixed the corporate seal of the City of San Jose, this 17th day of October, 2012. (SEAL). DENNIS HAWKINS, CMC CITY CLERK & EX-OFFICIO CLERK OF THE CITY COUNCIL /rmk RD:RG ORD. NO. 29153 9/25/2012 ORDINANCE NO. 29153 AN ORDINANCE OF THE CiTY OF SAN JOSE AMENDING TITLE 23 OF THE SAN JOSE MUNICIPAL CODE BY AMENDING SECTIONS 23.02.290, 23.02.940, AND 23.02.1110, AND ADDING A NEW SECTION 23.02.493, TO CHAPTER 23.02, AMENDING SECTIONS 23.04.020 AND 23.04.120 OF CHAPTER 23.04, ALL TO AMEND SIGNAGE REGULATIONS PERTAINING TO SERVICE STATION CANOPY SIGNAGE, AMENDING
    [Show full text]
  • Glossary of Terms
    143 Glossary of Terms Baluster: A vertical support used to fill the open area between the rail and the stair or landing. Balustrade: A complete rail system that includes the handrail, balusters, and newel posts. Box newel: An oversize square newel that is usually hollow and is used in a post-to-post balustrade system. Brackets: Ornamental pieces fastened beneath the tread on the open side of a stair; also know as tread brackets. Building code: A set of legal requirements established by various governing agencies that covers the minimum regulations for all types of construction, including stair construction. Bullnose starting step or tread: A starting tread that has one or both ends rounded to a semi-cir- cle and projecting beyond the face of the stair stringer. Cap: The part of the fitting that accepts the newel post; used in conjunction with a pin top newel in an over the post balustrade system. Carriage: See stringer. Easement: The over or under ramp of a stair or rail. False Tread Caps: A piece attached to the end of a rough tread to simulate solid wood treads, usu- ally with a carpet runner down the steps. Fillet: A thin strip that is usually flat on one side and fits into the plow of a piece of handrail or shoe rail. Flight: A continuous series of steps with no intermediate landings. Gooseneck: A fitting that is used in the transition of a handrail to a landing or balcony; compen- sates for the change in the rise of the stair and may make a change in direction.
    [Show full text]
  • Cabinet Room Scope and Content Notes
    WHITE HOUSE TAPES CABINET ROOM CONVERSATIONS Nixon Presidential Materials Staff National Archives and Records Administration Linda Fischer Mark Fischer Ronald Sodano February 2002 NIXON WHITE HOUSE TAPES CABINET ROOM TAPES On October 16, 1997, the Nixon Presidential Materials staff opened eighty-three Nixon White House tapes containing conversations which took place within the Cabinet Room from February 16, 1971 through July 18, 1973. This release consisted of approximately 436 conversations and totaled approximately 154 hours. The Cabinet Room was one of seven locations in which conversations were surreptitiously taped. The complete Cabinet Room conversations are available to the public on reference cassettes C1 – C251 During review of the Cabinet Room tapes, approximately 78 hours of conversations were withdrawn under the provisions of the Presidential Recordings and Materials Preservation Act of 1974 (PRMPA) (44 USC 2111 note) and Executive Order (EO) 12356. These segments were re-reviewed under EO 12958 (April 17, 1995). As a result, the Nixon Presidential Materials Staff was able to open approximately 69 hours of previously restricted audio segments. The declassified segments were released on February 28, 2002, and are available as excerpted conversation segments on reference cassettes E504 – E633. These recorded White House tapes are part of the Presidential historical materials of the Nixon Administration. These materials are in the custody of the National Archives and Records Administration (NARA) under the provisions of the PRMPA. Access to the Nixon Presidential materials is governed by the PRMPA and its implementing public access regulations. A Brief History of the White House Taping System In February 1971, the United State Secret Service (USSS), at the request of the President, installed listening devices in the White House.
    [Show full text]
  • Entertainment & Living Room
    ENTERTAINMENT & LIVING ROOM ® HOOKER® FURNITURE FEATURES CONSOLES accommodating 70” (178 cm) TVs Elevating Entertainment Have the best of both worlds—a high-tech 70” TV and a high-taste level console that elegantly blends Relax and reconnect as you come to the favorite part of sound bar with your décor. For your clutter-free entertainment, your day. It’s that time when you put your feet up, sit back CURATA our consoles provide wire management, media and 1600-55480-MWD Entertainment Console and enjoy your favorite TV show, movie or sports event. Or component storage and electrical outlets for easy Rubberwood Solids and Oak Veneers maybe your time is more lively, as you jump and move to a equipment hook-ups. Four touch latch wood doors, one wood shelf behind game of electronic tennis or join a virtual rock band. the two outside doors, two ventilated wood shelves behind the center pair of doors, ventilated back panel, At Hooker Furniture, we want to help make your downtime FC705 three plug outlet power supply. enjoying movies, electronic games or music even better. 80W x 18D x 32H (203 x 46 x 81 cm) That’s why we’ve thoughtfully designed a wide selection See pages 62 & 63 for matching living room tables. of home entertainment furniture in styles ranging from American traditional to casual to modern, with finishes from Many consoles feature a component area warm brown to black, red or antique white. large enough for sound bars. Our engineers have designed our consoles, consoles with hutches, and home theaters with functional features such as wire management, touch lighting, adjustable shelves, doors ventilation and drawers, and of course plenty of storage space for all your related components and DVDs or CDs.
    [Show full text]
  • Guidelines for Member-Led Tours Into the Capitol Dome General
    GUIDELINES FOR MEMBER-LED TOURS INTO THE CAPITOL DOME GENERAL Member Must Accompany Group – Members are responsible for their guests and must accompany them during the entire tour. Availability – Dome tours are available to Members of Congress only and are conducted by US Capitol Visitor Center Guides Hours of Operation – Tours are available Monday through Friday from 9:00 a.m. to 3:00 p.m. Tours last between 45-60 minutes. One (1) tour per hour is available. Group Size – To ensure that a safe evacuation is possible, group size is limited to the Guide, the Member, plus a maximum of seven (7) guests. Scheduling – To request a tour, please call Visitor Services at (202) 593-1762. Requests may be made up to sixty (60) days in advance and are processed in the order in which they are received on a space available basis. Severe Weather – Weather-permitting, the Guide will take Dome Tour groups to the balcony beneath the Statue of Freedom. However, during periods of severe weather (i.e., thunderstorms, lightning, snow, and high wind), the Guide will conduct a Dome Tour of the internal space only. Where to Meet for the Tour – The Member should bring the tour group to the Crypt of the Capitol and meet the Guide at the Office of Congressional Accessibility Services, which is located in the Crypt (room S-156). Waiver Forms – Signed waiver forms must be given to the Guide prior to the beginning of the tour. Children – Children may participate in Dome Tours, but, due to the nature of the tour route, the tour is not recommended for children under the age of 10.
    [Show full text]
  • Brochure Displays Several Hi-Con References and Installation Principles to Inspire You to Create the Balcony of Your Dreams
    BALCONIES in high performance concrete BALCONYSLABS 13 PARAPETBALCONIES 21 BOXBALCONIES 29 BALCONYRENOVATION 39 INSTALLATIONPRINCIPLES 45 2 3 WHAT IS YOUR BALCONY DREAM? 4 Bosco Verticale - Milano Ragnitzstrasse 36, Austria Rendering by Fujimoto Architechts by LOVE Architecture and Urbanism 3 5 IMAGINE INNOVATE IMPRESS if you can dream it, you can do it... Walt Disney If you can dream it, you can do it Walt Disney 6 6 WE MAKE YOUR BALCONY DREAMS COME TRUE Balconies from Hi-Con are bespoke solutions ”that create value” for both the architect, the engineer, the contractor, the builder and the end-user. Hi-Con is specialized in creating solutions in high performance concrete for buildings where both a strong design and func- tionality is essential. The slender balconies from Hi-Con exploit the unique properties of high performance con- crete to create larger balconies with greater aesthetical possibilities than other materials. This brochure displays several Hi-Con references and installation principles to inspire you to create the balcony of your dreams. COUNSELING AND SHARING KNOWLEDGE IS ALWAYS A PART OF THE PROCESS When you choose a Hi-Con balcony, our knowledge and counseling is always a part of the process. That means that we put our specialized knowledge into play in every project to make sure to create a solution that meets the required design and specific installation principles for your balcony. With high performance concrete comes a plentitude of possible ways of combining function, aesthetic design and installation principles,
    [Show full text]
  • Halfen Hit – Insulated Balcony Connection Hit 13-Us
    HALFEN HIT – INSULATED BALCONY CONNECTION HIT 13-US CONCRETE Apartment building with HIT, Canada Turn up the Heat on Insulation Improved quality of life with the HIT balcony connection from HALFEN – efficient solutions for your balcony designs. alconies offer additional living space Versatile B and increase the quality of life – as An extensive range of sizes and long as they do not compromise the configurations enable a HALFEN HIT insulation of the building interior. The solution for virtually all concrete balcony insulation problems of concrete balconies connections, whether fully cantilevered, are solved with the HIT balcony connection partially projecting or fully inset. We can from HALFEN. also offer you an insulated connection solution for many other types of projecting Eco-friendly concrete features including, walkways, HALFEN HIT connections are designed to corbels, parapets, and canopies. help maintain comfortable interior temperatures while reducing energy use. Many advantages with one result: HALFEN provides safety, reliability and Efficient efficiency for you and your customers. Integral polystyrene insulation and the selective use of stainless steel components Safe almost eliminates thermal transfer All load-bearing components in the between the balcony and the floor insulating joint are made from of high- slab. This reduces heat loss through the quality corrosion-resistant stainless steel. structure and reduces the possibility of All HALFEN HIT balcony connections are interior condensation and mold growth. available with
    [Show full text]
  • Panels, Fillers & Decorative Items
    205 Panels, Fillers & Decorative Items MOLDING PANELS, FILLERS & DECORATIVE ITEMS & DECORATIVE FILLERS PANELS, Designer Resources: resources.woodmarkcabinetry.com American Woodmark Designer’s Choice Specification Guide 206 PANELS, FILLERS & DECORATIVE ITEMS: Panels Panels Desk End Panel Dishwasher Return APC DEP DWR3 FE PE 3 ● Features ⁄4″ engineered wood with TuffTech ● Reversible for left or right installation finish - both sides finished to match cabinet exterior ● Solid wood front 1 ● Recommend QM8 WD be ordered for installation to ● Features ⁄2″ engineered wood with TuffTech ensure proper attachment to wall finish - outside to match cabinet exterior and inside ● Edge banded on front with a natural woodgrain look ● Field trimmable ● Attaching blocks included ● Field trimmable to 1″ in width ● Can be notched for toe kick in the field Sink /Vanity Front Return Sink /Vanity Front Floor APC SFRR FE FL24 FL48X48 SFRL PE FL36 FL60 FL36X36 FL72 FL48 1 1 ● Features ⁄2″ engineered wood with TuffTech ● Features ⁄2″ engineered wood with TuffTech finish - outside to match cabinet exterior and inside finish - one side finished with a natural woodgrain look PANELS, FILLERS & DECORATIVE ITEMS & DECORATIVE FILLERS PANELS, 1 with a natural woodgrain look ● ⁄2″ oversize in width ● SKU signifies left or right return ● FL36X36 to be used for CSF36 (trim to fit) ● Attaching blocks included ● FL48X48 to be used for CSF42 (trim to fit) ● When ordered with Furniture Ends Option (FE) return ● Field trimmable will feature a rabbeted front edge ● Field trimmable
    [Show full text]
  • Storage Furniture (PDF)
    Storage Furniture Fabrication Materials and Standards What Materials Should Be Used in the Construction of Storage Furniture? Many of the currently available furniture choices contain materials that produce by-products that contribute to the deterioration of the items housed in the furniture. Opinion on what constitutes acceptable storage furniture is changing rapidly. If you are considering the purchase of furniture, you may want to consult a preservation professional for the most up-to-date information. Steel storage furniture with various powder coatings is a safe choice, and many different types of furniture are available in this material. Museums often choose this material. Anodized aluminum storage furniture is another option and is considered by many to be the best choice, especially for highly sensitive items, but this tends to be the most expensive. Open chrome shelving, made of heavy-gauge, chrome-plated steel wire, is another suitable option, but because the wires can leave permanent marks on items that are not protected, boxing is required. Until recently, furniture with a baked enamel finish was the recommended choice. Lately, however, questions have been raised about the possibility of the baked enamel coating off-gassing (giving off) formaldehyde and other harmful substances if it has not been properly baked. If you have this type of shelving, contact a preservation professional to see if this is a problem in your particular situation. Wood One of the most commonly used materials for furniture is wood. Unfortunately, storage of valuable items in direct contact with wooden storage furniture is discouraged because of acids and other harmful substances exuded by wood and some wood sealants.
    [Show full text]
  • Millcraft-Cabinet-Catalog.Pdf
    PRODUCT CATALOG “MillCraft Cabinet” millcraft.us UNPRECEDENTED QUALITY EASY TO ASSEMBLE MillCraft Cabinet is one of the most sturdy, well-built We offer two option for your orders, assembled cabinets in the industry, we guarantee it. All of our and kd. Our assembly is easy as can be. All you cabinets are made of 3/4” birch plywood, white TFL need are basic tools and some time to assemble We’re bringing manufacturing back! and maple TFL. the MillCraft Cabinet Modules. TFL drawer units are connected with cabineo European PRICE Proudly manufactured in the USA, all of our cabinets and components go above connection system. Plywood drawer unites are We are the direct manufacturers of our cabinets. connected with cabineo system and also dovetail joints. As a manufacturer, we are able to offer our industry standards to give you and your customers the utmost satisfaction. customers unbeatable savings over comparative SIMPLE DESIGN cabinet providers. Easy design and quick pricing avability through our product library in MillCraft Cabinet grants homeowners the flexibility Cabinet Vision, and 2020 design software. and variety needed to organize and design their MANUFACTURED IN THE USA dream custom cabinet, while maintaining the Proudly manufactured in the USA with durable, simplicity and ease of kitchen design. long-lasting and unmatched quality of local Convenient online ordering at www.millcraft.us resources. DISPLAYS & SAMPLES -More Jobs for Americans Inquire with our sales department about a display -Reduced Cost for Deliveries or sample box. We offer our dealers three kinds of -Shorter Lead Times options to showcase our cabinets. -Environmentally Friendly -A Higher Standard of Safety & Quality Control Our clients can: -Homegrown Customer Service -Order samples boxes -U.S.
    [Show full text]