DOCSLIB.ORG

Compactpci-General Info

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Compactpci-General Info GENERALGENERAL PAPRAMETERSPAPRAMETERS CompactPCI-GeneralCompactPCICompactPCI (CPCI) (CPCI) is theis the specification specification Info for foran anindustrial industrial CLIMATICCLIMATIC computercomputer bus bus developed developed by byPCI PCI Industrial Industrial Computer Computer ManufacturersManufacturers Group Group (PICMG). (PICMG). CPCI CPCI is anis anadaptation adaptation - Operating- Operating temperature temperature –40 –40 °C °Cup upto +85to +85 °C °C of the Peripheral Component Interconnect (PCI)for of the Peripheral Component Interconnect (PCI)for - Storage temperature –55 °C up to +85 °C industrialindustrial and/or and/or embedded embedded applications applications that that require require a a - Storage temperature –55 °C up to +85 °C moremore robust robust mechanical mechanical form form factor factor than than Desktop Desktop PCI. PCI. - Climatic- Climatic conditions conditions category category to IECto IEC 68/1: 68/1: 25/085/21 25/085/21 General Climatic ElmaElma offers offers backplanes backplanes for foroperation operation at 33at 33MHz MHz with with CompactPCI (CPCI) is the specification for an industrial computer Operating temperature –40 °C up to +85 °C 2-82-8 slots. slots. Backplanes Backplanes with with 2-5 2-5 slots slots are are available available for for bus66 developed 66MHz MHz bus busby frequency. PCI frequency. Industrial All Computer AllElma Elma backplanes Manufacturers backplanes have Group have 64- 64- Storage temperature –55 °C up to +85 °C (PICMG).bit bitrouting routing CPCI and is andan are adaptation are hot hot swap swapof capable.the capable.Peripheral Component Climatic conditions category to IEC 68/1: 25/085/21 Interconnect (PCI)for industrial and/or embedded applications that require a more robust mechanical form factor than Desktop PCI. Elma offers backplanes for operation at 33 MHz with 2-8 MECHANICALMECHANICAL ConnectorsConnectors MECHANICAL slots. Backplanes with 2-5 slots are available for 66 MHz bus Flammability: - Flammability: frequency.The CompactPCI All Elma backplanes connector have is 64-a shielded bit routing 2and mm are pitch hot - Flammability:• PCB: UL 94 V-0 The CompactPCI connector is a shielded 2 mm pitch - PCB: UL 94 V-0 swapand capable.5+2 rows connector compliant to IEC 917 and IEC -• Connectors:PCB: UL 94 UL V-094 V-0/–1 and 5+2 rows connector compliant to IEC 917 and IEC - Connectors: UL 94 V-0/–1 61076-4-101.61076-4-101. The The connector connector includes includes the the following following -Vibration: Connectors: UL 94 V-0/–1 Connectors features:features: - Vibration:- Vibration:• According to DIN 41640 part 15: - -According• 10According Hz to to500 DINto Hz DIN 541640 g 41640rms part part 15: 15: The- CompactPCICoding- Coding mechanism mechanismconnector isand a andshielded guiding guiding 2 devicemm device pitch for and forrear 5+2 rear 10• Impact10Hz Hzto (10 500to impacts500 Hz Hz5 perg 5 rms axisg rms x,y,z) 50 g, 6 ms rowscards connectorcards compliant to IEC 917 and IEC 61076-4-101. The - -LayerstackupImpact Impact (10 (10 10impacts layers/8impacts per layers per axis axis (2 x,y,z) Slot) x,y,z) 50 50g, 6g, ms 6 ms connector- Pin- Pinstaging includes staging thefor followingforhot hot swap swapfeatures: - Layerstackup- LayerstackupConnector: 210 mm 10layers/8 pitch, layers/8 7 layersrows, layers (2 Slot)(2 Slot) - Coding Shrouds- Shrouds mechanism for forrear andrear I/O guiding I/O device for rear cards • Quality class 2 compliant to spec. IEC 61076-4-101 and - Connector:- Connector: 2 mm 2 mm pitch, pitch, 7 rows, 7 rows, • BELLCORE GR-1217-CORE - Pin Shielding- staging Shielding for for hot forEMI/RFI swap EMI/RFI protection protection - -Quality Quality class class 2 compliant 2 compliant to spec.to spec. IEC IEC 61076-4-101 61076-4-101 and and • Insertion force 0.75 N and extraction force 0.15 N of Shrouds for rear I/O BELLCOREBELLCORE GR-1217-CORE GR-1217-CORE • every contact Shielding for EMI/RFI protection - -Insertion Insertion force force 0.75 0.75 N and N and extraction extraction force force 0.15 0.15 N of N of ELECTRICAL EMIEMI filter filter everyevery contact contact According to PICMG 2.0 R.3.0 EMIElma filter CPCI backplanes have excellent EMI properties. Elma CPCI backplanes have excellent EMI properties. VI/O configurable to +3.3 V or +5 V (+5 V factory set- They are designed in a way to allow virtually zero ElmaThey CPCI backplanesare designed have in excellent a way EMIto allowproperties. virtually They arezero tings) designedcrosstalkcrosstalk in aand way and extra to allowextra low virtually low HF HFradiation. zero radiation. crosstalk These and These extrafeatures features low Clock frequency: 33 MHz or 66 MHz (2-5 Slot) HFare radiation.are realized realized These thanks featuresthanks to areanto realizedanoptimized optimized thanks structure to structure an optimized with with dif- dif- structureferentferent withtypes typesdifferent of capacitorsof types capacitors of capacitors well well distributed well distributed distributed on ontheon the entire entire Bus width: 32/64 bit entiresurfacesurface surface of oftheof the the backplane. backplane. backplane. ELECTRICALELECTRICAL Data transfer rate: max. 533 Mbyte/s (66 MHz/64 bit) Impedance Z0 without connectors and daughter cards: - According- According65 Ohm to+/–10% PICMGto PICMG 2.0 2.0 R.3.0 R.3.0 - VI/O- VI/OTermination configurable configurable with Schottkyto +3.3to +3.3 DiodeV or V +5Array:or +5V onlyV optional for (+5(+58 Vslot factory V with factory rear settings) cardsettings) Current carrying capacity of power planes - Clock- Clock frequency: frequency: 33 33MHz MHz or 66or 66MHz MHz (2-5 (2-5 Slot) Slot) • +3.3 V/GND: 10 A/slot - Bus width: 32/64 bit - Bus• +5 width: V/GND: 32/64 8 A/slot bit - Data- DataMax. transfer voltagetransfer rate: drop rate: max.(center max. 533 to 533boardout): Mbyte/s Mbyte/s 20(66 mV(66 MHz/64 MHz/64 bit) bit) - Impedance- Impedance Z0 Z0without without connectors connectors and and daughter daughter cards: cards: 65 65Ohm Ohm +/–10% +/–10% - Termination- Termination with with Schottky Schottky Diode Diode Array: Array: only only optional optional for for8 slot 8 slot with with rear rear card card - Current- Current carrying carrying capacity capacity of powerof power planes planes -- +3.3 +3.3 V/GND: V/GND: 10 10A/slot A/slot -- +5 +5V/GND: V/GND: 8 A/slot 8 A/slot - Max.- Max. voltage voltage drop drop (center (center to boardout):to boardout): 20 20mV mV AVAILABLEAVAILABLE SLOTS SLOTS AVAILABLE SLOTS No.No. of slotof slot 22 3 3 4 4 5 5 67 67 8 8 PCBPCB width width (mm) (mm)39.6439.64 59.96 59.96 80.3 80.3 100.6 100.6 120.92 120.92 141.24 141.24 161.56 161.56 15 15 Subject to errors and technical modifications. Copyright ELMA Electronic www.elma.com CompactPCI Backplanes-General Information Subject to errors and technical modifications. Copyright ELMA Electronic www.elma.com CompactPCI-Power Options CompactPCI Power Options POWER CONNECTION VIA POWERBOLTS AND FASTONS (M3 CABLE LUGS, WASHER AND NUTS ENCLOSED) H – ATX cable, 2–8 slot 6 – Fastons, 2-3 slot 8 – Power bolts, 4-8 slot 10 A max./Faston 30 A max./M3 Power bolts H – ATX cable, 2–8 slot POWER CONNECTION VIA INTERCONNECTION- AND POWER BOARD 9 – DIN 41612 Type M, 4-8 slot K – Positronic P47, 4-8 3U: Lower position J – Positronic P47, 4-8 slot 3U: Lower position 6U: Upper und lower slot 6U: Upper positi- on position M - Positronic P47, 4-8 L – Positronic P47, slot 6U: 2x Lower position 4-8 slot 6U: 2x Upper position POWER CONNECTION „STAND ALONE“ (HAS TO BE WIRED) Power Boards 3U Power Boards 6U 020-927 (8HP, 1x P47) 020-929 (8HP, 1x P47) 020-071(16HP,2x P47) 019-748 (16HP, 2x P47) Subject to errors and technical modifications. Copyright ELMA Electronic www.elma.com CompactPCI Backplanes-Power Option 6 (Fastons) 3. Additional Connectors – Pin Assignment 2. Power Option 6 (Fastons) FCON (12-way Header); part number of mating - for backplanes with 2 and 3 slots, 3U or 6U connector including 1m cable: 008-083 2 Slots Voltage Fastons GND 4 +5V 2 4. VIO Settings +3.3V 1 +12V 2 The VIO voltage -12V 1 can be set either to +5V or to +3.3V 3 Slots Coding for P1 connectors: Voltage Fastons Coding Device VIO GND 3 Cadmium Yellow RAL 3456 +3.3V +5V 3 Brilliant Blue RAL 1567 +5V +3.3V 3 5. Power connections for additional devices 6. 33 / 66MHz Operation +12V 2 (for BPs with 5 slots or less) -12V 1 Current rating for one faston is max. 10A M66 fitted 33MHz Operation M66 not fitted 66MHz Operation Note: the 66MHz backplanes have always VIO set to +3.3V Fastons for Fastons for Fan Connection HDD Connection (+12V, GND) (+12, GND,+5V) Subject to errors and technical modifications. Copyright ELMA Electronic www.elma.com CompactPCI Backplanes-Power Option 8 (Power Bolts) 3. Additional Connectors – Pin Assignment 2. Power Option 8 (Power Bolts) FCON (12-way Header); part number of mating 1. PS-ON connector including 1m cable: 008-083 XP1 - for backplanes with more than 4 slots, 3U or 6U 2. PS-ON 1. FAL# XP2 2. DEG# 1. IPMB0_SCL XP3 2. IPMB0_SDA 3. IPMB_PWR 4. VIO Settings The VIO voltage can be set either to Included Components: +5V or to +3.3V 1) CPCI Backplane 2) 7 x spacer (5mm height) 3) 7 x cable lug for M3 screw 4) 7 x washer for M3 screw Coding for P1 connectors: 5) 7 x nut for M3 screw Coding Device VIO Cadmium Yellow RAL 3456 +3.3V M3 bolt current rating = 30A Brilliant Blue RAL 1567 +5V 5. Power connections for additional devices 6.
Load more

Recommended publications
  • Download MEN G501 Manual
    20G501-00 E2 – 2011-06-20 G501 – 3U CompactPCI Serial® SATA HDD/SSD Shuttle User Manual Embedded Solutions ® G501 – 3U CompactPCI® Serial SATA HDD/SSD Shuttle G501 – 3U CompactPCI® Serial SATA HDD/SSD Shuttle The G501 is a CompactPCI® Serial hard disk drive carrier board. It is designed to carry a 2.5" SATA hard disk drive (RAID level depending on the CPU) or a solid state drive. The unit's front panel features four LEDs for the board's SGPIO status (used for the hot plug functionality) and the status of the internal controller's power supply. Block Diagram LEDs SGPIO Controller +3.3V P1 Hard Power Drive +5V Supply +12V SATA MEN Mikro Elektronik GmbH 2 20G501-00 E2 – 2011-06-20 Technical Data Technical Data Mass Storage • Serial ATA (SATA) - One port for onboard 2.5" hard disk drive or solid state drive - Transfer rates depending on HDD/SSD - RAID level depends on CPU board External Interfaces • 4 LEDs at front panel - 3 for the SGPIO status (for hot plug functionality) - 1 for the internal controller's supply voltage status CompactPCI Serial • Compliance with CompactPCI Serial PICMG CPCI-S.0 Specification • Peripheral slot • Host interface: one SATA and one SGPIO interface Electrical Specifications • Supply voltage - +12V (-25%/+10%), power consumption depending on HDD/SSD Mechanical Specifications • Dimensions: conforming to CPCI-S.0 specification for 3U boards • Hot plug functionality (depending on CPU board). • Weight: 125 g (without HDD/SSD) Environmental Specifications • Temperature range (operation): - -40..+85°C (depending on HDD or SSD; please refer to the HDD/SSD speci- fications for possible limits) - Airflow: min.
    [Show full text]
  • Compactpci Serial ...The Smart Solution
    CompactPCI® Serial ... ... the Smart Solution © EKF •www. ekf.com CompactPCI® Serial Systems Designed for performance • 40 x PCI® Express • 8 x Gigabit Ethernet • 8 x SATA • 8 x USB3 CompactPCI® Serial - the Smart Solution www.ekf.com/s/serial.html © EKF •www. ekf.com CompactPCI® Serial Systems CPCI Serial backplanes for optimum throughput CompactPCI® Serial - the Smart Solution Sample Backplanes CompactPCI® Serial The CompactPCI® Serial system slot is located either most left or most right © EKF •www. ekf.com CompactPCI® Serial Systems Reverse order backplanes (system slot right aligned) for CPU cards with 4HP to 12HP front panel CompactPCI® Serial - the Smart Solution www.ekf.com/s/serial.html © EKF •www. ekf.com CompactPCI® Serial Systems CPCI® Serial BLUBRICK series - ultra rugged CompactPCI® Serial - the Smart Solution www.ekf.com/s/srs/srs1201/srs1201.html SRS-1201-BLUBRICK CompactPCI® Serial © EKF • www.ekf.com CompactPCI® Serial Systems CPCI Serial BluBoxx series - small and economic www.ekf.com/s/srs/srs3201/srs3201.html CompactPCI® Serial - the Smart Solution SRS-3201-BLUBOXX CompactPCI® Serial © EKF •www. ekf.com CompactPCI® Serial Systems CPCI Serial rugged system racks www.ekf.com/s/srs/srs4401/srs4401.html CompactPCI® Serial - the Smart Solution SRS-4401-SERIAL CompactPCI® Serial © EKF •www. ekf.com CompactPCI® Serial Systems CPCI® Serial racks 84HP CompactPCI® Serial - the Smart Solution www.ekf.com/s/srs/srs8401/srs8401.html SRS-8401-SERIAL CompactPCI® Serial © EKF •www. ekf.com Embedded Blue® CPCI® Serial boxed solutions • fixed & custom configuration CompactPCI® Serial - the Smart Solution www.ekf.com/b/bc200/bc200.html BC200 Embedded Blue® © EKF •www.
    [Show full text]
  • A Multiple-Bus, Active Backplane Architecture for Multiprocessor Systems Scott Alan Irwin Iowa State University
    Iowa State University Capstones, Theses and Retrospective Theses and Dissertations Dissertations 1990 A multiple-bus, active backplane architecture for multiprocessor systems Scott Alan Irwin Iowa State University Follow this and additional works at: https://lib.dr.iastate.edu/rtd Part of the Computer Sciences Commons, and the Electrical and Electronics Commons Recommended Citation Irwin, Scott Alan, "A multiple-bus, active backplane architecture for multiprocessor systems " (1990). Retrospective Theses and Dissertations. 9509. https://lib.dr.iastate.edu/rtd/9509 This Dissertation is brought to you for free and open access by the Iowa State University Capstones, Theses and Dissertations at Iowa State University Digital Repository. It has been accepted for inclusion in Retrospective Theses and Dissertations by an authorized administrator of Iowa State University Digital Repository. For more information, please contact [email protected]. Kmwi m««m» tM: gMgea)^ g«v% ,*%&v nî % -"T w}-t r << _ ^ y, , 6 "^"'"'1 ;/< c . i'7 L., '"0!^ ' ,/,i ' } C V' »,, VI i'.i? K !** ' ,'\''\^ja 4% /.ly - f ^ \''' ' %A. , .%V ' %Kie ^ w, * . s» fsf/aK, .y/;, %,,r. INFORMATION TO USERS The most advanced technology has been used to photograph and reproduce this manuscript from the microfilm master. UMI films the text directly from the original or copy submitted. Thus, some thesis and dissertation copies are in typewriter face, while others may be from any type of computer printer. The quality of this reproduction is dependent upon the quality of the copy submitted. Broken or indistinct print, colored or poor quality illustrations and photographs, print bleedthrough, substandard margins, and improper alignment can adversely affect reproduction.
    [Show full text]
  • Bi-Directional Optical Backplane Bus for General Purpose Multi-Processor B Oard-To-B Oard Optoelectronic Interconnects
    JOURNAL OF LIGHTWAVE TECHNOLOGY, VOL. 13, NO. 6, JUNE 1995 1031 Bi-Directional Optical Backplane Bus for General Purpose Multi-Processor B oard-to-B oard Optoelectronic Interconnects Srikanth Natarajan, Chunhe Zhao, and Ray. T. Chen Absfract- We report for the first time a bidirectional opti- cal backplane bus for a high performance system containing nine multi-chip module (MCM) boards, operating at 632.8 and 1300 nm. The backplane bus reported here employs arrays of multiplexed polymer-based waveguide holograms in conjunction with a waveguiding plate, within which 16 substrate guided waves for 72 (8 x 9) cascaded fanouts, are generated. Data transfer of 1.2 GbUs at 1.3-pm wavelength is demonstrated for a single bus line with 72 cascaded fanouts. Packaging-related issues such as Waveguiding Plate transceiver size and misalignment are embarked upon to provide n a reliable system with a wide bandwidth coverage. Theoretical U hocessor/Memory Board treatment to minimize intensity fluctuations among the nine modules in both directions is further presented and an optimum I High-speed Optoelectronic Transceiver design rule is provided. The backplane bus demonstrated, is for general-purpose and therefore compatible with such IEEE stan- - Waveguide Hologram For Bi-Directional Coupling dardized buses as VMEbus, Futurebus and FASTBUS, and can Fig. 1. Optical equivalent of a section of a single bidirectional electronic function as a backplane bus in existing computing environments. bus line. I. INTRODUCTION needed to preserve the rising and falling edges of the signals HE LIMITATIONS of current computer backplane buses increases. This makes using bulky, expensive, terminated Tstem from their purely electronic interconnects.
    [Show full text]
  • Compactpci Express for Control Applications H
    WEP038 Proceedings of ICALEPCS2009, Kobe, Japan COMPACTPCI EXPRESS FOR CONTROL APPLICATIONS H. Kleines, M. Ramm, M. Drochner,W. Erven, Zentralinstitut für Elektronik, Forschungszentrum Jülich, Jülich, Germany Abstract The PCIMG standardized ATCA (PICMG 3.x) and CompactPCI (CPCI) is well established in control MicroTCA (PICMG MTCA.0) . ATCA was mainly driven applications as a standard for industrial PCs and as a by the Telecom industry. MicroTCA is a more cost standard for front-end instrumentation, e.g. by means of efficient spin off from ATCA based on AMC, the ATCA the transparent optical PCI/CPCI Bridge MXI-4 from mezzanine card standard. With company National National Instruments. In both application areas increasing Instruments as the main driving force, PICMG also performance requirements ask for a replacement of the defined CompactPCI Express (PICMG EXP.0) as a parallel CPCI bus by a backplane based on high speed downward compatible extension of CompactPCI. On the serial links, similar to the replacement of PCI by PCIe in initiative of several vendors of CompactPCI CPUs, the desktop environment. CompactPCI Express and its PICMG has started a new not yet finished standardization derivative PXI Express both provide a smooth and cost- activity for the CompactPCI Plus standards PICMG 2.30 efficient transition path from CPCI to high speed serial PlusIO and CPLUS.0. CompactPCI Plus also aims at a links on the backplane. follow up system to CompactPCI, which is downward Forschungszentrum Jülich has developed a compatible. As a consequence, CompactPCI Plus is a CompactPCI Express carrier board for CMC daughter direct competitor of CompactPCI. CompactPCI Plus modules that is compatible to the SIS1100-CMC/cCMC defines also USB, SATA and Gigabit Ethernet links on the boards from company Struck Innovative Systeme.
    [Show full text]
  • PCJ-JAM • Compactpci ® Serial System Slot Controller
    Product Information PCJ-JAM • CompactPCI ® Serial System Slot Controller Document No. 5600 • 2010-03 CompactPCI® Serial is a new PICMG® specification The PCJ-JAM delivers 4 PCI Express® lanes to the for modular computers based on high speed signals, CompactPCI® Serial backplane, configurable 4x1 or comprising PCI Express®, SATA, Ethernet and USB 1x4. Up to 8 SATA channels are available in total. 5 channels. In hybrid systems, CompactPCI® Serial SATA channels are derived from a RAID controller, backplanes and modules can be used concurrently suitable e.g. for level 0/1/3/5/10 operation. The PCJ- together with legacy CompactPCI® cards. JAM is equipped with two Gigabit Ethernet controllers, individually switchable either for A typical EKF hybrid system provides two backplane communication or front panel usage. In backplanes, with their system slots center aligned addition, 6 USB ports are routed to the backplane. side by side. To the left, a CompactPCI® CPU card such as the CCM-BOOGIE controls the legacy The PCJ-JAM is also a fully featured side card, e.g. section. To the right, the PCJ-JAM acts as the with a secondary DVI video output, HD Audio CompactPCI® Serial system slot controller. The PCJ- Codec, and EIA 232 serial I/O. As a rugged on-board JAM is a side card (mezzanine board) to the CPU storage solution, either a 2.5-inch SATA drive or a card, which results in a 8HP common front panel for 1.8-inch SATA Solid State Drive module fits on the the entire assembly. PCJ-JAM. PCJ-JAM on CCM-BOOGIE, with C42-SATA SSD © EKF -1- ekf.com PCJ-JAM • CompactPCI® Serial System Slot Controller The PCJ-JAM is a member of the EKF familiy of CompactPCI® PlusIO and CompactPCI® Serial products.
    [Show full text]
  • International Standard ISO/IEC 10859 Was Prepared by Joint Technical Committee ISO/IEC JTC1, Information Technology, SC 26: Microprocessor System
    This is a preview - click here to buy the full publication INTERNATIONAL ISO/IEC STANDARD 10859 First edition 1997-06 Information technology – 8-bit backplane interface: STEbus and mechanical core specifications for microcomputers Technologies de l'information – Interface de fond de panier 8 bits – Bus STE ISO/IEC 1997 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from the publisher. ISO/IEC Copyright Office • Case postale 56 • CH-1211 Genève 20 • Switzerland This is a preview - click here to buy the full publication – 2 – 10859 © ISO/IEC:1997 CONTENTS Page FOREWORD ................................................................................................................... 3 IEEE STANDARD FOR A 8-BIT BACKPLANE INTERFACE: STEBUS INTRODUCTION ............................................................................................................. 4 Clause 1 General .................................................................................................................... 5 2 Functional description............................................................................................... 9 3 Signal lines............................................................................................................... 10 4 Arbitration................................................................................................................
    [Show full text]
  • Compactpci and Avancedtca Systems
    ® VOLUME 11 • NUMBER 9 DECEMBER 2007 CompactPCI www.compactpci-systems.com ® www.advancedtca-systems.com and AdvancedTCA Systems The Magazine for Developers of Open Communication, Industrial, and Rugged Systems COLUMNS PRODUCTS 8 Editor’s Foreword AdvancedTCA Summit 2007 19 AdvancedMCs, PrAMCs, Carriers By Joe Pavlat Sponsored by: Adax,® Inc. 41 Storage FEATURES 43 Blades/AdvancedTCA CompactPCI Sponsored by: Emerson Network Power; Sun Microsystems HIGH AVAILABILITY ® 10 Achieving high availability and management 50 Power andwith the latest standard COTS technologies By Dr. Asif Naseem, GoAhead Software 35 Connectors AdvancedTCA Sponsored by:Systems Harting Technology Group; CONEC FABRICS 18 Comparing Ethernet and RapidIO 55 Test & Development By Tom Roberts, Mercury Computer Systems 27 Enclosures/Packaging AdvancedTCA Sponsored by: Carlo Gavazzi Computing Solutions; Schroff 30 The critical importance of shelf management 73 VoIP in AdvancedTCA By Frank Fitzgerald, Carlo Gavazzi Computing Solutions 59 Integrated Systems Sponsored by: Alliance Systems; Kontron MicroTCA 67 MicroTCA 38 MicroTCA power module input connectors Sponsored by: CorEdge Networks; Motorola Inc. By Juergen Hahn-Barth, CONEC Corporation 23 Networking/Communications INTERVIEW 62 Speaking of middleware 71 PMCs, PrPMCs, Carriers Sponsored by: Xembedded, Inc. An interview with Jim Lawrence and Chris Lanfear, Enea 47 Switches WEB RESOURCES 51 Single Board Computers Subscribe to the magazine or E-letter at: Sponsored by: Aitech Defense Systems, Inc.; General Dynamics www.opensystems-publishing.com/subscriptions Industry news: COVER (Clockwise): Read: www.compactpci-systems.com/news The HDCIII is a high density SS7/ATM controller from ADAX (www.adax.com). The HDCIII provides Submit: www.opensystems-publishing.com/news/submit 8 E1/T1 trunks, simultaneous support for 248 MTP2 LSLs, HSLs, and SS7 ATM AAL5, and offers AMC, PMC, PCI-X and PCIe versions from a single driver.
    [Show full text]
  • Compactpci: a Solution for the Next Generation of Computer Telephony Integration (CTI)
    CompactPCI: A Solution for the Next Generation of Computer Telephony Integration (CTI) Definition Computer telephony integration (CTI) is a term to which many are becoming accustomed. It encompasses an entire industry, devoted to the closer integration of telephony systems with computer-control devices, as well as an ever- expanding range of applications. At the forefront of this industry are innovative products, built using hardware able to terminate digital telephony tier 1 (T1) and E1 (T1 European equivalent) trunk interfaces, fax and voice processing resources, voice-over–IP (VoIP) technology, and other standard peripheral devices. Typically, these operate in industrialized chassis housings and act as switches, voice-mail servers, automatic call distributors (ACDs), and nearly any other kind of telco equipment imaginable. The CTI revolution has led to a generation of such equipment, upsetting traditional notions of how telephony networks should be built. Overview Over the years, various standards and specifications have been adopted to propel CTI technology. Recently, a new generation of standards emerged, at the forefront of which is CompactPCI. CompactPCI is a new standard for computer backplane architecture and peripheral integration, defined and developed by the peripheral component interconnect (PCI) industrial computers manufacturers group (PICMG) and capable of dramatically raising the stakes in the world of computer telephony. Combining the practicalities and real-world economics of the conventional personal computer (PC) world with the kind of features long-demanded by telcos, CompactPCI sets the standard for a new generation of CTI products. For the first time, integrators can cheaply and efficiently build rugged, high-density systems with the added advantage of hot swappability.
    [Show full text]
  • Selection Guide Selection Note: F-Front SBC; R-Rear Transition Module SBC; R-Rear Transition Note: F-Front Combinations of SBC with Chassis 
    Selection Guide 6U CompactPCI® SBC NEW NEW NEW 6U cPCI SBC Model Name cPCI-6920 cPCI-6880 cPCI-6965 cPCI-6920 cPCI-6920D cPCI-6965 cPCI-6965D CPU and Core Logic CPU Support Quad/Dual-Core 2x Quad/Dual-Core Intel® CoreTM2 Duo/ Celeron® M Intel® CoreTM2 Duo/ Celeron® M Intel® Xeon® Intel® Xeon® CPU Speed 2.13GHz 2x 2.13GHz 2.53GHz/ 2.0GHz 2.2GHz/ 2.0GHz Chipset 5100 MCH/ICH9R GM45/ICH9M GME965/ICH8M FSB (MHz) 1066 1066/533 800/533 Form Factor & PICMG Spec. 2.0 (R3.0), 2.1 (R2.0), 2.9 (R1.0), 2.16 (R1.0) 2.0 (R3.0), 2.1 (R2.0), 2.9 (R1.0), 2.16 (R1.0) 2.0 (R3.0), 2.1 (R2.0) Bus (IPMI v1.5) (IPMI v1.5) Form Factor 6U 6U 6U Slot Width 1 2 1 1 2 Host/Peripheral Satellite Universal Host PCI Bandwidth (max.) 64-bit/66 MHz 64-bit/66 MHz 32-bit/33 MHz PMC -- 1 (64-bit) 1 (64-bit) -- 1 (32-bit) XMC -- 1 (PCI-E x8) -- -- -- Memory DIMM Slots 2x DDR2 SORDIMM 4x DDR2 SORDIMM 1x DDR2 SODIMM 2x DDR2 SODIMM Max. Soldered -- -- 4GB -- Max. Memory 8GB 16GB 8GB 4GB ECC Capability Yes No No Display Graphic Controller ATI ES1000 GM45 GME965 Interfaces VGA DVI-I DVI-I + DVI-D Ethernet Gigabit Ethernet 4 (2F+2R) 4 (2F+2R) 2 Storage SCSI Ultra-320 (on RTM) Ultra-320 (on RTM) Ultra-320 (on RTM) SATA 4 (1F+3R) 4 (1F+3R) 3 (2F+1R) IDE Interface -- -- -- I/O CompactFlash Yes Yes Yes USB 6 (2F+4R) 8 (4F+4R) 7 (3F+4R) 8 (4F+4R) Serial 2 R 3 (1F+2R) 3 (1F+2R) 1 2 Parallel -- -- -- 1 Other Keyboard / Mouse 1R 2 (1F+1R) 1R -- 1 Support HS Periph.
    [Show full text]
  • MCP750HA Compactpci Single Board Computer Installation And
    MCP750HA Hot Swap CompactPCI Single Board Computer Installation and Use MCP750HA/IH3 December 2000 © Copyright 2000 Motorola, Inc. All rights reserved. Printed in the United States of America. Motorola® and the Motorola symbol are registered trademarks of Motorola, Inc. PowerPC™ is a trademark of IBM Corporation, and is used by Motorola, Inc. under license from IBM Corporation. CompactPCI is a registered trademark of PCI Industrial Computer Manufacturers Group. All other products mentioned in this document are trademarks or registered trademarks of their respective holders. Safety Summary The following general safety precautions must be observed during all phases of operation, service, and repair of this equipment. Failure to comply with these precautions or with specific warnings elsewhere in this manual could result in personal injury or damage to the equipment. The safety precautions listed below represent warnings of certain dangers of which Motorola is aware. You, as the user of the product, should follow these warnings and all other safety precautions necessary for the safe operation of the equipment in your operating environment. Ground the Instrument. To minimize shock hazard, the equipment chassis and enclosure must be connected to an electrical ground. If the equipment is supplied with a three-conductor AC power cable, the power cable must be plugged into an approved three-contact electrical outlet, with the grounding wire (green/yellow) reliably connected to an electrical ground (safety ground) at the power outlet. The power jack and mating plug of the power cable meet International Electrotechnical Commission (IEC) safety standards and local electrical regulatory codes. Do Not Operate in an Explosive Atmosphere.
    [Show full text]
  • SFF-TA-1005 Universal Backplane Management
    Published SFF-TA-1005 Rev 1.3 SFF-TA-1005 Specification for Universal Backplane Management (UBM) Rev 1.3 January 14, 2020 Secretariat: SFF TA TWG Abstract: This specification defines the Universal Backplane Management structure. This specification provides a common reference for systems manufacturers, system integrators, and suppliers. This specification is made available for public review, and written comments are solicited from readers. Comments received by the members will be considered for inclusion in future revisions of this specification. The description of a connector in this specification does not assure that the specific component is actually available from connector suppliers. If such a connector is supplied it shall comply with this specification to achieve interoperability between suppliers. POINTS OF CONTACT: Josh Sinykin/Jason Stuhlsatz Chairman SFF TA TWG Broadcom Limited Email: [email protected] 4385 River Green Parkway Duluth, GA 30096 Ph: 678-728-1406 Email: [email protected] /[email protected] Universal Backplane Management (UBM) Page 1 Copyright © 2020 SNIA. All rights reserved. Published SFF-TA-1005 Rev 1.3 Intellectual Property The user's attention is called to the possibility that implementation of this specification may require the use of an invention covered by patent rights. By distribution of this specification, no position is taken with respect to the validity of a claim or claims or of any patent rights in connection therewith. This specification is considered SNIA Architecture and is covered
    [Show full text]