GENERALGENERAL PAPRAMETERSPAPRAMETERS CompactPCI-GeneralCompactPCICompactPCI (CPCI) (CPCI) is theis the specification specification Info for foran anindustrial industrial CLIMATICCLIMATIC computercomputer bus bus developed developed by byPCI PCI Industrial Industrial Computer Computer ManufacturersManufacturers Group Group (PICMG). (PICMG). CPCI CPCI is anis anadaptation adaptation - Operating- Operating temperature temperature –40 –40 °C °Cup upto +85to +85 °C °C of the Peripheral Component Interconnect (PCI)for of the Peripheral Component Interconnect (PCI)for - Storage temperature –55 °C up to +85 °C industrialindustrial and/or and/or embedded embedded applications applications that that require require a a - Storage temperature –55 °C up to +85 °C moremore robust robust mechanical mechanical form form factor factor than than Desktop Desktop PCI. PCI. - Climatic- Climatic conditions conditions category category to IECto IEC 68/1: 68/1: 25/085/21 25/085/21 General Climatic ElmaElma offers offers backplanes backplanes for foroperation operation at 33at 33MHz MHz with with CompactPCI (CPCI) is the specification for an industrial computer Operating temperature –40 °C up to +85 °C 2-82-8 slots. slots. Backplanes Backplanes with with 2-5 2-5 slots slots are are available available for for bus66 developed 66MHz MHz bus busby frequency. PCI frequency. Industrial All Computer AllElma Elma backplanes Manufacturers backplanes have Group have 64- 64- Storage temperature –55 °C up to +85 °C (PICMG).bit bitrouting routing CPCI and is andan are adaptation are hot hot swap swapof capable.the capable.Peripheral Component Climatic conditions category to IEC 68/1: 25/085/21 Interconnect (PCI)for industrial and/or embedded applications that require a more robust mechanical form factor than Desktop PCI. Elma offers backplanes for operation at 33 MHz with 2-8 MECHANICALMECHANICAL ConnectorsConnectors MECHANICAL slots. Backplanes with 2-5 slots are available for 66 MHz bus Flammability: - Flammability: frequency.The CompactPCI All Elma backplanes connector have is 64-a shielded bit routing 2and mm are pitch hot - Flammability:• PCB: UL 94 V-0 The CompactPCI connector is a shielded 2 mm pitch - PCB: UL 94 V-0 swapand capable.5+2 rows connector compliant to IEC 917 and IEC -• Connectors:PCB: UL 94 UL V-094 V-0/–1 and 5+2 rows connector compliant to IEC 917 and IEC - Connectors: UL 94 V-0/–1 61076-4-101.61076-4-101. The The connector connector includes includes the the following following -Vibration: Connectors: UL 94 V-0/–1 Connectors features:features: - Vibration:- Vibration:• According to DIN 41640 part 15: - -According• 10According Hz to to500 DINto Hz DIN 541640 g 41640rms part part 15: 15: The- CompactPCICoding- Coding mechanism mechanismconnector isand a andshielded guiding guiding 2 devicemm device pitch for and forrear 5+2 rear 10• Impact10Hz Hzto (10 500to impacts500 Hz Hz5 perg 5 rms axisg rms x,y,z) 50 g, 6 ms rowscards connectorcards compliant to IEC 917 and IEC 61076-4-101. The - -LayerstackupImpact Impact (10 (10 10impacts layers/8impacts per layers per axis axis (2 x,y,z) Slot) x,y,z) 50 50g, 6g, ms 6 ms connector- Pin- Pinstaging includes staging thefor followingforhot hot swap swapfeatures: - Layerstackup- LayerstackupConnector: 210 mm 10layers/8 pitch, layers/8 7 layersrows, layers (2 Slot)(2 Slot) - Coding Shrouds- Shrouds mechanism for forrear andrear I/O guiding I/O device for rear cards • Quality class 2 compliant to spec. IEC 61076-4-101 and - Connector:- Connector: 2 mm 2 mm pitch, pitch, 7 rows, 7 rows, • BELLCORE GR-1217-CORE - Pin Shielding- staging Shielding for for hot forEMI/RFI swap EMI/RFI protection protection - -Quality Quality class class 2 compliant 2 compliant to spec.to spec. IEC IEC 61076-4-101 61076-4-101 and and • Insertion force 0.75 N and extraction force 0.15 N of Shrouds for rear I/O BELLCOREBELLCORE GR-1217-CORE GR-1217-CORE • every contact Shielding for EMI/RFI protection - -Insertion Insertion force force 0.75 0.75 N and N and extraction extraction force force 0.15 0.15 N of N of ELECTRICAL EMIEMI filter filter everyevery contact contact According to PICMG 2.0 R.3.0 EMIElma filter CPCI backplanes have excellent EMI properties. Elma CPCI backplanes have excellent EMI properties. VI/O configurable to +3.3 V or +5 V (+5 V factory set- They are designed in a way to allow virtually zero ElmaThey CPCI backplanesare designed have in excellent a way EMIto allowproperties. virtually They arezero tings) designedcrosstalkcrosstalk in aand way and extra to allowextra low virtually low HF HFradiation. zero radiation. crosstalk These and These extrafeatures features low Clock frequency: 33 MHz or 66 MHz (2-5 Slot) HFare radiation.are realized realized These thanks featuresthanks to areanto realizedanoptimized optimized thanks structure to structure an optimized with with dif- dif- structureferentferent withtypes typesdifferent of capacitorsof types capacitors of capacitors well well distributed well distributed distributed on ontheon the entire entire Bus width: 32/64 bit entiresurfacesurface surface of oftheof the the backplane. backplane. backplane. ELECTRICALELECTRICAL Data transfer rate: max. 533 Mbyte/s (66 MHz/64 bit) Impedance Z0 without connectors and daughter cards: - According- According65 Ohm to+/–10% PICMGto PICMG 2.0 2.0 R.3.0 R.3.0 - VI/O- VI/OTermination configurable configurable with Schottkyto +3.3to +3.3 DiodeV or V +5Array:or +5V onlyV optional for (+5(+58 Vslot factory V with factory rear settings) cardsettings) Current carrying capacity of power planes - Clock- Clock frequency: frequency: 33 33MHz MHz or 66or 66MHz MHz (2-5 (2-5 Slot) Slot) • +3.3 V/GND: 10 A/slot - Bus width: 32/64 bit - Bus• +5 width: V/GND: 32/64 8 A/slot bit - Data- DataMax. transfer voltagetransfer rate: drop rate: max.(center max. 533 to 533boardout): Mbyte/s Mbyte/s 20(66 mV(66 MHz/64 MHz/64 bit) bit) - Impedance- Impedance Z0 Z0without without connectors connectors and and daughter daughter cards: cards: 65 65Ohm Ohm +/–10% +/–10% - Termination- Termination with with Schottky Schottky Diode Diode Array: Array: only only optional optional for for8 slot 8 slot with with rear rear card card - Current- Current carrying carrying capacity capacity of powerof power planes planes -- +3.3 +3.3 V/GND: V/GND: 10 10A/slot A/slot -- +5 +5V/GND: V/GND: 8 A/slot 8 A/slot - Max.- Max. voltage voltage drop drop (center (center to boardout):to boardout): 20 20mV mV AVAILABLEAVAILABLE SLOTS SLOTS AVAILABLE SLOTS No.No. of slotof slot 22 3 3 4 4 5 5 67 67 8 8 PCBPCB width width (mm) (mm)39.6439.64 59.96 59.96 80.3 80.3 100.6 100.6 120.92 120.92 141.24 141.24 161.56 161.56 15 15 Subject to errors and technical modifications. Copyright ELMA Electronic www.elma.com CompactPCI Backplanes-General Information Subject to errors and technical modifications. Copyright ELMA Electronic www.elma.com CompactPCI-Power Options CompactPCI Power Options POWER CONNECTION VIA POWERBOLTS AND FASTONS (M3 CABLE LUGS, WASHER AND NUTS ENCLOSED) H – ATX cable, 2–8 slot 6 – Fastons, 2-3 slot 8 – Power bolts, 4-8 slot 10 A max./Faston 30 A max./M3 Power bolts H – ATX cable, 2–8 slot POWER CONNECTION VIA INTERCONNECTION- AND POWER BOARD 9 – DIN 41612 Type M, 4-8 slot K – Positronic P47, 4-8 3U: Lower position J – Positronic P47, 4-8 slot 3U: Lower position 6U: Upper und lower slot 6U: Upper positi- on position M - Positronic P47, 4-8 L – Positronic P47, slot 6U: 2x Lower position 4-8 slot 6U: 2x Upper position POWER CONNECTION „STAND ALONE“ (HAS TO BE WIRED) Power Boards 3U Power Boards 6U 020-927 (8HP, 1x P47) 020-929 (8HP, 1x P47) 020-071(16HP,2x P47) 019-748 (16HP, 2x P47) Subject to errors and technical modifications. Copyright ELMA Electronic www.elma.com CompactPCI Backplanes-Power Option 6 (Fastons) 3. Additional Connectors – Pin Assignment 2. Power Option 6 (Fastons) FCON (12-way Header); part number of mating - for backplanes with 2 and 3 slots, 3U or 6U connector including 1m cable: 008-083 2 Slots Voltage Fastons GND 4 +5V 2 4. VIO Settings +3.3V 1 +12V 2 The VIO voltage -12V 1 can be set either to +5V or to +3.3V 3 Slots Coding for P1 connectors: Voltage Fastons Coding Device VIO GND 3 Cadmium Yellow RAL 3456 +3.3V +5V 3 Brilliant Blue RAL 1567 +5V +3.3V 3 5. Power connections for additional devices 6. 33 / 66MHz Operation +12V 2 (for BPs with 5 slots or less) -12V 1 Current rating for one faston is max. 10A M66 fitted 33MHz Operation M66 not fitted 66MHz Operation Note: the 66MHz backplanes have always VIO set to +3.3V Fastons for Fastons for Fan Connection HDD Connection (+12V, GND) (+12, GND,+5V) Subject to errors and technical modifications. Copyright ELMA Electronic www.elma.com CompactPCI Backplanes-Power Option 8 (Power Bolts) 3. Additional Connectors – Pin Assignment 2. Power Option 8 (Power Bolts) FCON (12-way Header); part number of mating 1. PS-ON connector including 1m cable: 008-083 XP1 - for backplanes with more than 4 slots, 3U or 6U 2. PS-ON 1. FAL# XP2 2. DEG# 1. IPMB0_SCL XP3 2. IPMB0_SDA 3. IPMB_PWR 4. VIO Settings The VIO voltage can be set either to Included Components: +5V or to +3.3V 1) CPCI Backplane 2) 7 x spacer (5mm height) 3) 7 x cable lug for M3 screw 4) 7 x washer for M3 screw Coding for P1 connectors: 5) 7 x nut for M3 screw Coding Device VIO Cadmium Yellow RAL 3456 +3.3V M3 bolt current rating = 30A Brilliant Blue RAL 1567 +5V 5. Power connections for additional devices 6.