3U Compactpci® Serial Backplane 9 Slots, System Slot Left, Ethernet Single-Star

Total Page：16

File Type：pdf, Size：1020Kb

DATA SHEET 3U COMPACTPCI® SERIAL BACKPLANE 9 SLOTS, SYSTEM SLOT LEFT, ETHERNET SINGLE-STAR DESCRIPTION The 3U 9-slot CompactPCI® Serial backplane provides one system slot and eight peripheral slots. The CompactPCI® Serial specification, CompactPCI® S.0 is based on the CompactPCI® mechanical form factor. It supports serial point-to-point connections via a single star backplane architecture and optionally IEEE 802.3 Ethernet standard in a single star or mesh architecture. CompactPCI® Serial backplanes are intended for use in systems requiring symmetrical multiprocessing and component redundancy. FEATURES • CompactPCI® Serial (PICMG CompactPCI® S.0) compliant backplane • 1 x CompactPCI® S.0 system slot left (CPU) and 8 x CompactPCI® S.0 Peripheral Slots • High-speed connectors supporting data transfer rates up to 12Gbps in all 9 slots • Designed to support Rear Transition Modules • Single star topology for serial interfaces such as PCI Express, SATA, USB 2.0 and USB 3.0 are provided by the CompactPCI® S.0 system slot • Europacard form factor in 3U height BOARD SPECIFICATIONS • 3U, 9 slots, system slot left • Utility connectors for system control and management • Power in made over M3 power studs MECHANICAL SPECIFICATIONS • Slot Pitch: 0.8“ (20.32 mm) • PCB size: 182.4 mm x 128.5 mm • PCB thickness: 4.4 mm 04/20 www.elma.com DATA SHEET 3U COMPACTPCI® SERIAL BACKPLANE 9 SLOTS, SYSTEM SLOT LEFT, ETHERNET SINGLE-STAR BACKPLANE DIAGRAM ORDER INFORMATION Hight Total Slots Description Part Number CompactPCI® Serial 3U Backplane with 9 Slots, 3U 9 System Slot Left, Ethernet single-star, 1CPCIS-309-L100 without connectors for RTMs (Rear Transition Modules) CompactPCI® Serial 3U Backplane with 9 Slots, 3U 9 System Slot Left, Ethernet single-star, 1CPCIS-309-L110 with connectors for RTMs (Rear Transition Modules) 04/20 www.elma.com.

Copy Link

Recommended publications

Download MEN G501 Manual
20G501-00 E2 – 2011-06-20 G501 – 3U CompactPCI Serial® SATA HDD/SSD Shuttle User Manual Embedded Solutions ® G501 – 3U CompactPCI® Serial SATA HDD/SSD Shuttle G501 – 3U CompactPCI® Serial SATA HDD/SSD Shuttle The G501 is a CompactPCI® Serial hard disk drive carrier board. It is designed to carry a 2.5" SATA hard disk drive (RAID level depending on the CPU) or a solid state drive. The unit's front panel features four LEDs for the board's SGPIO status (used for the hot plug functionality) and the status of the internal controller's power supply. Block Diagram LEDs SGPIO Controller +3.3V P1 Hard Power Drive +5V Supply +12V SATA MEN Mikro Elektronik GmbH 2 20G501-00 E2 – 2011-06-20 Technical Data Technical Data Mass Storage • Serial ATA (SATA) - One port for onboard 2.5" hard disk drive or solid state drive - Transfer rates depending on HDD/SSD - RAID level depends on CPU board External Interfaces • 4 LEDs at front panel - 3 for the SGPIO status (for hot plug functionality) - 1 for the internal controller's supply voltage status CompactPCI Serial • Compliance with CompactPCI Serial PICMG CPCI-S.0 Specification • Peripheral slot • Host interface: one SATA and one SGPIO interface Electrical Specifications • Supply voltage - +12V (-25%/+10%), power consumption depending on HDD/SSD Mechanical Specifications • Dimensions: conforming to CPCI-S.0 specification for 3U boards • Hot plug functionality (depending on CPU board). • Weight: 125 g (without HDD/SSD) Environmental Specifications • Temperature range (operation): - -40..+85°C (depending on HDD or SSD; please refer to the HDD/SSD speci- fications for possible limits) - Airflow: min.
[Show full text]
Compactpci Serial ...The Smart Solution
CompactPCI® Serial ... ... the Smart Solution © EKF •www. ekf.com CompactPCI® Serial Systems Designed for performance • 40 x PCI® Express • 8 x Gigabit Ethernet • 8 x SATA • 8 x USB3 CompactPCI® Serial - the Smart Solution www.ekf.com/s/serial.html © EKF •www. ekf.com CompactPCI® Serial Systems CPCI Serial backplanes for optimum throughput CompactPCI® Serial - the Smart Solution Sample Backplanes CompactPCI® Serial The CompactPCI® Serial system slot is located either most left or most right © EKF •www. ekf.com CompactPCI® Serial Systems Reverse order backplanes (system slot right aligned) for CPU cards with 4HP to 12HP front panel CompactPCI® Serial - the Smart Solution www.ekf.com/s/serial.html © EKF •www. ekf.com CompactPCI® Serial Systems CPCI® Serial BLUBRICK series - ultra rugged CompactPCI® Serial - the Smart Solution www.ekf.com/s/srs/srs1201/srs1201.html SRS-1201-BLUBRICK CompactPCI® Serial © EKF • www.ekf.com CompactPCI® Serial Systems CPCI Serial BluBoxx series - small and economic www.ekf.com/s/srs/srs3201/srs3201.html CompactPCI® Serial - the Smart Solution SRS-3201-BLUBOXX CompactPCI® Serial © EKF •www. ekf.com CompactPCI® Serial Systems CPCI Serial rugged system racks www.ekf.com/s/srs/srs4401/srs4401.html CompactPCI® Serial - the Smart Solution SRS-4401-SERIAL CompactPCI® Serial © EKF •www. ekf.com CompactPCI® Serial Systems CPCI® Serial racks 84HP CompactPCI® Serial - the Smart Solution www.ekf.com/s/srs/srs8401/srs8401.html SRS-8401-SERIAL CompactPCI® Serial © EKF •www. ekf.com Embedded Blue® CPCI® Serial boxed solutions • fixed & custom configuration CompactPCI® Serial - the Smart Solution www.ekf.com/b/bc200/bc200.html BC200 Embedded Blue® © EKF •www.
[Show full text]
Compactpci Express for Control Applications H
WEP038 Proceedings of ICALEPCS2009, Kobe, Japan COMPACTPCI EXPRESS FOR CONTROL APPLICATIONS H. Kleines, M. Ramm, M. Drochner,W. Erven, Zentralinstitut für Elektronik, Forschungszentrum Jülich, Jülich, Germany Abstract The PCIMG standardized ATCA (PICMG 3.x) and CompactPCI (CPCI) is well established in control MicroTCA (PICMG MTCA.0) . ATCA was mainly driven applications as a standard for industrial PCs and as a by the Telecom industry. MicroTCA is a more cost standard for front-end instrumentation, e.g. by means of efficient spin off from ATCA based on AMC, the ATCA the transparent optical PCI/CPCI Bridge MXI-4 from mezzanine card standard. With company National National Instruments. In both application areas increasing Instruments as the main driving force, PICMG also performance requirements ask for a replacement of the defined CompactPCI Express (PICMG EXP.0) as a parallel CPCI bus by a backplane based on high speed downward compatible extension of CompactPCI. On the serial links, similar to the replacement of PCI by PCIe in initiative of several vendors of CompactPCI CPUs, the desktop environment. CompactPCI Express and its PICMG has started a new not yet finished standardization derivative PXI Express both provide a smooth and cost- activity for the CompactPCI Plus standards PICMG 2.30 efficient transition path from CPCI to high speed serial PlusIO and CPLUS.0. CompactPCI Plus also aims at a links on the backplane. follow up system to CompactPCI, which is downward Forschungszentrum Jülich has developed a compatible. As a consequence, CompactPCI Plus is a CompactPCI Express carrier board for CMC daughter direct competitor of CompactPCI. CompactPCI Plus modules that is compatible to the SIS1100-CMC/cCMC defines also USB, SATA and Gigabit Ethernet links on the boards from company Struck Innovative Systeme.
[Show full text]
PCJ-JAM • Compactpci ® Serial System Slot Controller
Product Information PCJ-JAM • CompactPCI ® Serial System Slot Controller Document No. 5600 • 2010-03 CompactPCI® Serial is a new PICMG® specification The PCJ-JAM delivers 4 PCI Express® lanes to the for modular computers based on high speed signals, CompactPCI® Serial backplane, configurable 4x1 or comprising PCI Express®, SATA, Ethernet and USB 1x4. Up to 8 SATA channels are available in total. 5 channels. In hybrid systems, CompactPCI® Serial SATA channels are derived from a RAID controller, backplanes and modules can be used concurrently suitable e.g. for level 0/1/3/5/10 operation. The PCJ- together with legacy CompactPCI® cards. JAM is equipped with two Gigabit Ethernet controllers, individually switchable either for A typical EKF hybrid system provides two backplane communication or front panel usage. In backplanes, with their system slots center aligned addition, 6 USB ports are routed to the backplane. side by side. To the left, a CompactPCI® CPU card such as the CCM-BOOGIE controls the legacy The PCJ-JAM is also a fully featured side card, e.g. section. To the right, the PCJ-JAM acts as the with a secondary DVI video output, HD Audio CompactPCI® Serial system slot controller. The PCJ- Codec, and EIA 232 serial I/O. As a rugged on-board JAM is a side card (mezzanine board) to the CPU storage solution, either a 2.5-inch SATA drive or a card, which results in a 8HP common front panel for 1.8-inch SATA Solid State Drive module fits on the the entire assembly. PCJ-JAM. PCJ-JAM on CCM-BOOGIE, with C42-SATA SSD © EKF -1- ekf.com PCJ-JAM • CompactPCI® Serial System Slot Controller The PCJ-JAM is a member of the EKF familiy of CompactPCI® PlusIO and CompactPCI® Serial products.
[Show full text]
Compactpci and Avancedtca Systems
® VOLUME 11 • NUMBER 9 DECEMBER 2007 CompactPCI www.compactpci-systems.com ® www.advancedtca-systems.com and AdvancedTCA Systems The Magazine for Developers of Open Communication, Industrial, and Rugged Systems COLUMNS PRODUCTS 8 Editor’s Foreword AdvancedTCA Summit 2007 19 AdvancedMCs, PrAMCs, Carriers By Joe Pavlat Sponsored by: Adax,® Inc. 41 Storage FEATURES 43 Blades/AdvancedTCA CompactPCI Sponsored by: Emerson Network Power; Sun Microsystems HIGH AVAILABILITY ® 10 Achieving high availability and management 50 Power andwith the latest standard COTS technologies By Dr. Asif Naseem, GoAhead Software 35 Connectors AdvancedTCA Sponsored by:Systems Harting Technology Group; CONEC FABRICS 18 Comparing Ethernet and RapidIO 55 Test & Development By Tom Roberts, Mercury Computer Systems 27 Enclosures/Packaging AdvancedTCA Sponsored by: Carlo Gavazzi Computing Solutions; Schroff 30 The critical importance of shelf management 73 VoIP in AdvancedTCA By Frank Fitzgerald, Carlo Gavazzi Computing Solutions 59 Integrated Systems Sponsored by: Alliance Systems; Kontron MicroTCA 67 MicroTCA 38 MicroTCA power module input connectors Sponsored by: CorEdge Networks; Motorola Inc. By Juergen Hahn-Barth, CONEC Corporation 23 Networking/Communications INTERVIEW 62 Speaking of middleware 71 PMCs, PrPMCs, Carriers Sponsored by: Xembedded, Inc. An interview with Jim Lawrence and Chris Lanfear, Enea 47 Switches WEB RESOURCES 51 Single Board Computers Subscribe to the magazine or E-letter at: Sponsored by: Aitech Defense Systems, Inc.; General Dynamics www.opensystems-publishing.com/subscriptions Industry news: COVER (Clockwise): Read: www.compactpci-systems.com/news The HDCIII is a high density SS7/ATM controller from ADAX (www.adax.com). The HDCIII provides Submit: www.opensystems-publishing.com/news/submit 8 E1/T1 trunks, simultaneous support for 248 MTP2 LSLs, HSLs, and SS7 ATM AAL5, and offers AMC, PMC, PCI-X and PCIe versions from a single driver.
[Show full text]
Compactpci: a Solution for the Next Generation of Computer Telephony Integration (CTI)
CompactPCI: A Solution for the Next Generation of Computer Telephony Integration (CTI) Definition Computer telephony integration (CTI) is a term to which many are becoming accustomed. It encompasses an entire industry, devoted to the closer integration of telephony systems with computer-control devices, as well as an ever- expanding range of applications. At the forefront of this industry are innovative products, built using hardware able to terminate digital telephony tier 1 (T1) and E1 (T1 European equivalent) trunk interfaces, fax and voice processing resources, voice-over–IP (VoIP) technology, and other standard peripheral devices. Typically, these operate in industrialized chassis housings and act as switches, voice-mail servers, automatic call distributors (ACDs), and nearly any other kind of telco equipment imaginable. The CTI revolution has led to a generation of such equipment, upsetting traditional notions of how telephony networks should be built. Overview Over the years, various standards and specifications have been adopted to propel CTI technology. Recently, a new generation of standards emerged, at the forefront of which is CompactPCI. CompactPCI is a new standard for computer backplane architecture and peripheral integration, defined and developed by the peripheral component interconnect (PCI) industrial computers manufacturers group (PICMG) and capable of dramatically raising the stakes in the world of computer telephony. Combining the practicalities and real-world economics of the conventional personal computer (PC) world with the kind of features long-demanded by telcos, CompactPCI sets the standard for a new generation of CTI products. For the first time, integrators can cheaply and efficiently build rugged, high-density systems with the added advantage of hot swappability.
[Show full text]
Selection Guide Selection Note: F-Front SBC; R-Rear Transition Module SBC; R-Rear Transition Note: F-Front Combinations of SBC with Chassis 
Selection Guide 6U CompactPCI® SBC NEW NEW NEW 6U cPCI SBC Model Name cPCI-6920 cPCI-6880 cPCI-6965 cPCI-6920 cPCI-6920D cPCI-6965 cPCI-6965D CPU and Core Logic CPU Support Quad/Dual-Core 2x Quad/Dual-Core Intel® CoreTM2 Duo/ Celeron® M Intel® CoreTM2 Duo/ Celeron® M Intel® Xeon® Intel® Xeon® CPU Speed 2.13GHz 2x 2.13GHz 2.53GHz/ 2.0GHz 2.2GHz/ 2.0GHz Chipset 5100 MCH/ICH9R GM45/ICH9M GME965/ICH8M FSB (MHz) 1066 1066/533 800/533 Form Factor & PICMG Spec. 2.0 (R3.0), 2.1 (R2.0), 2.9 (R1.0), 2.16 (R1.0) 2.0 (R3.0), 2.1 (R2.0), 2.9 (R1.0), 2.16 (R1.0) 2.0 (R3.0), 2.1 (R2.0) Bus (IPMI v1.5) (IPMI v1.5) Form Factor 6U 6U 6U Slot Width 1 2 1 1 2 Host/Peripheral Satellite Universal Host PCI Bandwidth (max.) 64-bit/66 MHz 64-bit/66 MHz 32-bit/33 MHz PMC -- 1 (64-bit) 1 (64-bit) -- 1 (32-bit) XMC -- 1 (PCI-E x8) -- -- -- Memory DIMM Slots 2x DDR2 SORDIMM 4x DDR2 SORDIMM 1x DDR2 SODIMM 2x DDR2 SODIMM Max. Soldered -- -- 4GB -- Max. Memory 8GB 16GB 8GB 4GB ECC Capability Yes No No Display Graphic Controller ATI ES1000 GM45 GME965 Interfaces VGA DVI-I DVI-I + DVI-D Ethernet Gigabit Ethernet 4 (2F+2R) 4 (2F+2R) 2 Storage SCSI Ultra-320 (on RTM) Ultra-320 (on RTM) Ultra-320 (on RTM) SATA 4 (1F+3R) 4 (1F+3R) 3 (2F+1R) IDE Interface -- -- -- I/O CompactFlash Yes Yes Yes USB 6 (2F+4R) 8 (4F+4R) 7 (3F+4R) 8 (4F+4R) Serial 2 R 3 (1F+2R) 3 (1F+2R) 1 2 Parallel -- -- -- 1 Other Keyboard / Mouse 1R 2 (1F+1R) 1R -- 1 Support HS Periph.
[Show full text]
MCP750HA Compactpci Single Board Computer Installation And
MCP750HA Hot Swap CompactPCI Single Board Computer Installation and Use MCP750HA/IH3 December 2000 © Copyright 2000 Motorola, Inc. All rights reserved. Printed in the United States of America. Motorola® and the Motorola symbol are registered trademarks of Motorola, Inc. PowerPC™ is a trademark of IBM Corporation, and is used by Motorola, Inc. under license from IBM Corporation. CompactPCI is a registered trademark of PCI Industrial Computer Manufacturers Group. All other products mentioned in this document are trademarks or registered trademarks of their respective holders. Safety Summary The following general safety precautions must be observed during all phases of operation, service, and repair of this equipment. Failure to comply with these precautions or with specific warnings elsewhere in this manual could result in personal injury or damage to the equipment. The safety precautions listed below represent warnings of certain dangers of which Motorola is aware. You, as the user of the product, should follow these warnings and all other safety precautions necessary for the safe operation of the equipment in your operating environment. Ground the Instrument. To minimize shock hazard, the equipment chassis and enclosure must be connected to an electrical ground. If the equipment is supplied with a three-conductor AC power cable, the power cable must be plugged into an approved three-contact electrical outlet, with the grounding wire (green/yellow) reliably connected to an electrical ground (safety ground) at the power outlet. The power jack and mating plug of the power cable meet International Electrotechnical Commission (IEC) safety standards and local electrical regulatory codes. Do Not Operate in an Explosive Atmosphere.
[Show full text]
Compactpci 3U FEATURES
CompactPCI 3U FEATURES - Compliant with - PICMG 2.0 R3.0 CPCI Core Specification - PICMG 2.1 R2.0 Hot Swap Specification - PICMG 2.9 R1.0 System Management Specification - System slot right or left - Modular power system 2 to 3 slot powered via: - Fastons - ATX cable 4 to 8 slot powered via: - ATX cable - M3 power bolts (cable lugs, washer and nuts enclosed) - Positronic PCI H47 (pass through contacts enclosed) - DIN 41612 type M (pass through contacts enclosed) - Shrouds: P2 (only for 32 bit Backplanes) - 2 slot 8-layer construction; 3-8 slot 10-layer construction - Number of slots: 2-8 - 10-21 slot available with cPCI to cPCI Bridge - Virtually zero crosstalk - Fastons for supplying HDD and fans - Decoupling of the DC voltages far beyond 1 GHz (act as EMI-filter) - Hot swap capability - PCB height 128.7 mm - PCB thickness 3.2 mm - Connector for status signals "FCON" - Part number of mating connector including 1.0 m cable, open end: 008-083 - Service life (MTBF according to MIL-HDBK 217F): 4 Slot 930.000 h 8 Slot 470.000 h ORDER CODE 809 2 2 - 2 2 2 - 6 2 2 0 option code and description note 3 - left side System Slot 4 - right side 0 - 33 MHz, V(I/O) +5 V Clock frequency 6 - 66 MHz, V(I/O) +3.3 V 2-5 slot Number of slots 02 to 08 Bridge 6 - without bridge 6 - Fastons 2-3 slot 8 - Power bolts 4-8 slot Power connection 9 - DIN 41612 Type M connector 4-8 slot H - ATX cable 2-8 slot K - Positronic PCI H47 4-8 slot 0 - 64 bit Bus width 1 - 32 bit on request 0 - Power inputs tinned Contact plating IEC pins gold-plated class 2 12 GENERAL PAPRAMETERS CompactPCI (CPCI) is the specification for an industrial CLIMATIC computer bus developed by PCI Industrial Computer Manufacturers Group (PICMG).
[Show full text]
User Manual Compactpci Backplanes
User Manual CompactPCI Backplanes 73972-101 Rev.000 CompactPCI Manual Overview What is The latest specification for PCI-based industrial computers is called CompactPCI. It is electrically, a superset of desktop PCI with a different physical form factor. CompactPCI utilizes the Eurocard form factor popularized by the VME bus. Defined for both 3U (100mm by 160 mm) and 6U (160mm by 233 mm) card sizes, CompactPCI has the following features: Standard Eurocard dimensions (compliant with IEEE 1101.1 mechanical standards) High density 2mm Pin-and-Socket connectors (IEC approved and Bellcore qualified) Vertical card orientation for effective cooling Easy card retention Excellent shock and vibration characteristics Metal front panel User I/O connections on front or rear of module Standard chassis available from many suppliers Uses standard PCI silicon, manufactured in large volumes Staged power pins for Hot Swap capability Eight slots in basic configuration. Easily expanded with Bridge Chips What is PICMG PICMG (PCI Industrial Computer Manufacturers Group) is a consortium of over 600 companies who collaboratively develop open specifications for high performance telecommunications and industrial computing applications. The members of the consortium have a long history of developing leading edge products for these industries. CompactPCI Connector The CompactPCI connector is a shielded 2mm pitch, 5+2 row connector, compliant to IEC 61076-4-101. Main features of this connector are the pin stagging for hot swap and shielding for EMI/RFI protection. Page 1 of 25 CompactPCI Manual Schroff CPCI Backplanes Schroff CompactPCI Backplanes Schroff CompactPCI backplanes are fully compliant to the latest PICMG specifications. PICMG 2.0 R 3.0 cPCI Core Specification PICMG 2.1 cPCI Hot Swap Specification PICMG 2.6 Bridging Specification PICMG 2.9 System Management Bus Specification PICMG 2.10 Keying Specification Schroff CompactPCI backplanes are specially designed to achieve exellent power distribution, best signal integrity, virtually zero cross talk, and minimum clock skew.
[Show full text]
GE Fanuc Embedded Systems
GE Fanuc Embedded Systems CR11 Rugged 6U CompactPCI® SBC with Dual Core 32- or 64-bit Processor Features The CR11 is a 6U CompactPCI CPU board with inte- The CR11 provides a unique feature set, including • Intel® CoreTM2 Duo processor 1.5 GHz and grated dual core Intel Core 2 Duo or Intel Core Duo up to 4 GB of DDR2 SDRAM (200 MHz) with 2.16 GHz Processor and dual Gigabit Ethernet PICMG 2.16 enhanced ECC, four independent on-board PCI • Intel® CoreTM Duo processor 1.66 GHz and channels. The Intel dual core processor includes buses, system host and peripheral mode support 2.0 GHz two optimized execution cores in a single for the CPCI backplane, two PMC interfaces processor case. This enables execution of parallel (64-bit/133 MHz and 32-bit/33 MHz). Instead of • Intel Celeron® M processor ULV 423, 1.06 GHz threads or applications on separate cores with the PMC1, a PCI Express™ based XMC interface is • PICMG 2.1 (Hot Swap ) compliant dedicated CPU resources. The CR11 supports a available on request. A high level of functional inte- • Ultra compact, one slot 32- and 64-bit processor architecture. The CR11 gration (two Gigabit Ethernet, one Fast Ethernet, • System and non-system functionality is designed to meet the requirements of markets two serial interfaces (RS-232 or RS-422/485), • Up to 4 GB DDR2 SDRAM (200 MHz) with ECC such as automation, simulation/training, test and USB 2.0, integrated HDD or Flash drive) within a • Flash drive or local UDMA100 2.5” hard disk measurement, and military.
[Show full text]
Compact PCI, Interconnect Solutions for Computer Telephony Integration
integrated system technologies, LLC Monroe, CT 06468 CompactPCI, Interconnect Solutions for Computer Telephony Integration an adaptation of the Peripheral Component Interconnect (PCI) Specification Michael N. Perugini President © Integrated System Technologies, LLC All Rights Reserved Page 1 of 7 CompactPCI, Interconnect Solutions for Computer Telephony Integration The PICMG, (PCI Industrial Computer Manufacturers Group), is a consortium of over 450 companies who collaboratively develop specifications that adapt PCI technology for use in industrial and telecommunications computing applications. PICMG Specifications include CompactPCI, ( cPCI ), for Eurocard, rackmount applications and PCI/ISA for passive backplane, standard format cards. This groups purpose is to offer industrial equipment suppliers common specifications, thereby increasing availability and reducing the costs of industrial PCI standard-based products. CompactPCI is an adaptation of the Peripheral Component Interconnect (PCI) Specification for industrial and/or embedded applications requiring a more robust mechanical form factor than desktop PCI. CompactPCI uses industry standard mechanical components and high performance connector technologies to provide an optimized system intended for rugged applications. It provides a system that is electrically compatible with the PCI Specification, allowing low cost PCI components to be utilized in a mechanical form factor suited for rugged environments. cPCI specifies the 2 mm Hard Metric connector supported by the IEC-61076- 4-101, Telephony Specification, Issued Feb. 1999, (ref. Bishop Report Type 2). cPCI has developed into the defacto interconnect standard capable of addressing the numerous electro-mechanical issues associated with Computer Telephony Integration, (CTI), including printed circuit cards which have hot swap capability. CTI encompasses an entire industry, devoted to the closer integration of telephony systems with computer controlled devices.
[Show full text]