<<

Integra® Jarit™ Laparoscopic Instruments Product Catalog 2017 Edition Table of contents Table of contents

Table of contents...... 2

Guarantee/Warranty...... 3

Indications - Contraindications...... 3

Integra® Jarit™ 3-Piece Modular...... 5 Assembly and Disassembly...... 6

Handles...... 8 Axial-Style Handle...... 8 Ergonomic Ring Handle...... 8

Shaft...... 9 Shaft 5mm...... 9 Shaft 10mm...... 9

Inserts...... 10 Biopsy cup 5mm...... 10 5mm...... 15 Clamp 10mm...... 19 Dissecting 5mm...... 10 Dissecting forceps 10mm...... 19 Extracting forceps 5mm...... 15 Grasping forceps 5mm...... 11 Grasping forceps 5mm...... 15 Grasping forceps 10mm...... 18 5mm...... 17 Scissors 5mm...... 16

Integra® Jarit™ One-Piece...... 22 Apple Knot Pushers...... 26 Articulator ...... 25 Cholangiogram Clamp...... 25 Cholangiogram Guide...... 25 Fan Retractors...... 22 Forceps...... 23 Myoma Screws...... 26 Needle Holders...... 24 Stone extractor...... 25 /Irrigation set...... 26 Veress Needles...... 26

Integra® Jarit™ Accessories...... 28 Cleaning and Storage Accessories...... 28 Electrosurgical Accessory...... 29 Instrument Holder...... 29

Laparoscopic Suggested Sets...... 32 Set for Laparoscopic Appendectomy...... 33 Set for Laparoscopic Bariatric Procedure...... 34 Set for Laparoscopic Bariatric Procedure (Alternate Suggested Set)...... 35 Set for Laparoscopic Cholecystectomy...... 32

Numerical Index...... 38

Alphabetical Index...... 39

DOCUMENT FOR USE IN EUROPE, MIDDLE-EAST AND AFRICA ONLY. 2 Guarantee/WarrantyTable of contents

INTEGRA LIFESCIENCES CORPORATION (“INTEGRA”) warrants to the original purchaser only that each new INTEGRA product is free from manufacturing defects in material and workmanship under normal use and service for a period of two (2) years (except as otherwise expressly provided as to accessory items) from the date of delivery by INTEGRA to the first purchaser, but in no event beyond the expiration date stated on any product labeling.

All instruments sold by Integra Jarit are warranted only to the original purchaser and only against defects in workmanship or materials which under the intended use render such instruments inoperable.

All Integra® Jarit™ Carb-Bite™ instruments are further warranted for a period of three (3) years under normal use. Should any adjustment become necessary during this warranty period, Carb-Bite™ Needle Holder jaw inserts will be replaced without charge.

All Integra® Jarit Supercut™ Scissors are further warranted for a period of one year under normal use. Should any resharpening become necessary during this warranty period, Integra Jarit will provide this service without charge. A nominal charge will be made for sharpening after expiration of this warranty. Integra® Jarit Supercut™ Scissors will be date-stamped for control. Guarantee/Warranty

This Guarantee/Warranty shall be void in the event any Integra Jarit instrument is used for purposes other than as originally intended, is not maintained or cleaned properly, is damaged as a result of misuse or accident or is repaired or altered by unauthorized persons.

The above is a limited warranty, and it is the only warranty made by Integra Jarit. Integra Jarit makes no other warranty, express or implied, including any warranty of merchantability or fitness for a particular purpose, as well as any express or implied warranty to patients. Integra Jarit shall have no liability for consequential, exemplary or incidental damages even if it is aware of the possibility of such damages. No warranty or guarantee may be created by any act or statement nor may this warranty be modified in any way, except as a result of a writing signed by an officer of Jarit. These limitations on the creation or modification of this warranty may not be waived or modified orally or by any conduct. The stated express warranty is in lieu of all liabilities or obligations of Integra Jarit arising out of, or in connection with, the delivery, use or performance of any Integra Jarit instrument. Integra Jarit neither assumes nor authorizes any representative or other person to assume for it any other liability in connection with Integra Jarit's products.

All products are subject to slight changes in dimensions and finishes due to changes in manufacturing standards.

Ordering Procedure A written purchase order on customer's form may be requested for purchase of Integra® products.

Acceptance of Order Orders are accepted upon approval by Integra.

Returned Goods Policy Products must be returned in unopened packages with manufacturer’s seals intact to be accepted for replacement or credit unless returned due to a complaint of product defect. Determination of a product defect will be made by Integra. Products will not be accepted for replacement if they have been in the possession of the customer for more than 90 days.

Repairs and Maintenance Should your instruments require repair or maintenance, contact Integra for return authorization and address. Instruments returned to Integra for repair must have a statement testifying that each instrument has been thoroughly cleaned and sterilized. Failure to supply evidence of cleaning and disinfection will result in a cleaning charge and delayed processing of your instrument repair.

Product Information Disclosure Integra and its subsidiaries ("Integra") and manufacturer exclude all warranties, except Integra's applicable standard warranty whether expressed or implied, including but not limited to, any implied warranties of merchantability or fitness for a particular purpose. Neither Integra nor manufacturer shall be liable for any incidental or consequential loss, damage, or expense, directly or indirectly arising from use of these products. Neither Integra nor manufacturer assume nor authorize any person to assume for them any other or additional liability or responsibility in connection with these products.

Care and Handling/IFU For Care and Handling information and Instructions for use, please visit integralife.com/Jarit.

Indications - Contraindications Indications : All the medical devices showed in this banner have indications for laparoscopy. Endoscopic Monopolar Instruments and Accessories are used in laparoscopic and other minimally invasive procedures for cutting, dissection, fixation and taking of biopsy samples, depending on the design of the tip. They are also intended to control bleeding by use of monopolar high-frequency electrical current.

Contraindications : Do not use in indications other than the indications mentioned in the DFU or Labeling.

Consult product labels and insert for any indication, contraindications, hazards, warnings, precautions and instruction for use.

DOCUMENT FOR USE IN EUROPE, MIDDLE-EAST AND AFRICA ONLY. 3

3-Piece Modular Instruments 6 9 6 10 2 4 8 1 5 7 INCHES 3 10 80 230 40 250 30 240 200 20 90 100 70 60 120 are available inamonopolarconfiguration. and without rotation. Pistol grip or axial handle styles available. When assembled, reusable graspers, dissectors and scissors all sizes. Shaft andinsert willaccommodate up to 6 different handles styles; with andwithout ratchet mechanisms, and with Integra’s 3-Piece ModularLaparoscopic instrument lineisavailable in330mm, 360mm and450mmlengthsto suit patientsof instrument. term cost savings may berealized whenonlyworncomponents are replaced as necessary compared to requisitioning anewfull sterile processing staff. Only four steps to complete disassembly, with flush ports formaximum access during cleaning. Long suit complex minimally invasive procedures. Instruments completely disassemble for effective cleaning and decontamination by The Integra 3-Piece ModularLaparoscopic instrument consists ofahandleandshaft, withanextensive variety oftipinserts to 190 210 220 130 160 150 180 140 170 50 110

MILLIMETERS + DOCUMENT FOR USEINEUROPE, MIDDLE-EAST ANDAFRICAONLY. Integra® Jarit™ 3-Piece Modular = +

Integra® Jarit™ 3-Piece Modular

Assembly Disassembly • Ensure that the working part is closed. The nose of the tubular • Loosen the union nut. shaft and the notches on the insert must be on top of each other. • Open the grip completely. Disconnect the working part. The working end must audibly engage into the tubular shaft. • Release the working end from the tubular shaft by pressing • Open the grip completely. Connect the ball retainer of the the ball retainer towards the working end. working part into the coupling of the grip. • Remove the working insert completely from the tubular shaft. • Close the grip completely. • Tighten the union nut by hand.

1 1 3-Piece - Assembly and Disassembly - Assembly 3-Piece

CLICK

2 2

3 3

4 4

DOCUMENT FOR USE IN EUROPE, MIDDLE-EAST AND AFRICA ONLY. 7 8 9 6 10 2 4 8 1 5 7 INCHES 3 10 80 230 40 250 30 240 200 20 90 100 70 60 120 190 210 220 130 160 150 180 140 170 50 110

MILLIMETERS Ergonomic RingHandle Axial-Style Handle DOCUMENT FOR USEINEUROPE, MIDDLE-EAST ANDAFRICAONLY. Integra® Jarit™ 3-Piece Modular Catalog # 652113 Catalog # Catalog # Catalog # Catalog # Catalog # 652106 652108 652107 652110 652112 Handle Type Handle Handle Handle Handle Handle Type Type Type Type Type connection Ergonomic ringhandlewithrotation, ratchet, pushbutton release andHF Description connection Ergonomic ringhandlewithrotation, stepless ratchet, release key andHF Axial angledhandle,spreading springandratchet Axial handle,spreading spring Axial handle,spreading springandratchet Ergonomic ringhandlewithrotation andHFconnection Description Description Description Description Description Integra® Jarit™ 3-Piece Modular

Shaft - 5mm

Catalog # Type Length Diameter Description 3-Piece - Handles Shafts 3-Piece 652501 Shaft 330mm 5 Tube shaft 5mm, insulated, with Luer lock 652503 Shaft 360mm 5 Tube shaft 5mm, insulated, with Luer lock 652505 Shaft 450mm 5 Tube shaft 5mm, insulated, with Luer lock

Shaft - 10mm

Catalog # Type Length Diameter Description 652601 Shaft 330mm 10 Tube shaft 10mm, insulated, cylindrical tip, with Luer Lock 652603 Shaft 360mm 10 Tube shaft 10mm, insulated, cylindrical tip, with Luer Lock 652605 Shaft 450mm 10 Tube shaft 10mm, insulated, cylindrical tip, with Luer Lock

DOCUMENT FOR USE IN EUROPE, MIDDLE-EAST AND AFRICA ONLY. 9 10 9 6 10 2 4 8 1 5 7 INCHES 3 10 80 230 40 250 30 240 200 20 90 100 70 60 120 190 210 220 130 160 150 180 140 170 50 110

MILLIMETERS Dissecting Forceps -5mm Biopsy Cup -5mm 14.5mm 8mm 16.5mm 8mm 16.5mm 16mm 16mm DOCUMENT FOR USEINEUROPE, MIDDLE-EAST ANDAFRICAONLY. Integra® Jarit™ 3-Piece Modular Biopsy Cup, doubleactionjaws Dissecting Forceps, tapered, doubleactionjaws Dissecting Forceps, tapered Maryland,doubleactionjaws Dissecting Forceps, fenestrated, doubleactionjaws Dissecting Forceps, fenestrated, doubleactionjaws Biopsy Cup longwiththorn,singleactionjaws Biopsy Cup withthorn,doubleactionjaws Catalog # Catalog # Catalog # Catalog # Catalog # Catalog # Catalog # 654200 656200 655200 654204 656204 655204 654205 656100 656205 654100 655100 655205 654201 656201 655201 656103 654103 655103 656101 654101 655101 Insert Insert Insert Insert Insert Insert Insert Insert Insert Insert Insert Insert Insert Insert Insert Insert Insert Insert Insert Insert Insert Type Type Type Type Type Type Type 450mm 450mm 450mm 450mm 360mm 360mm 360mm 360mm 450mm 360mm 330mm 330mm 330mm 330mm 330mm Length Length Length Length Length 450mm 450mm 360mm 360mm 330mm 330mm Length Length Diameter Diameter Diameter Diameter Diameter Diameter Diameter 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 Integra® Jarit™ 3-Piece Modular

Grasping Forceps - 5mm Aggressive claw grasping forceps, double action jaws

Catalog # Type Length Diameter 654500 Insert 330mm 5 655500 Insert 360mm 5

656500 Insert 450mm 5 - Inserts 3-Piece

26.8mm

Atraumatic grasping forceps, with wavy teeth and reservoir, double action jaws

Catalog # Type Length Diameter 654504 Insert 330mm 5 655504 Insert 360mm 5 656504 Insert 450mm 5

26.6mm

Atraumatic grasping forceps, with wavy teeth and reservoir, single action jaws

Catalog # Type Length Diameter 654505 Insert 330mm 5 655505 Insert 360mm 5 656505 Insert 450mm 5 21.6mm

Claw grasping and extracting forceps, 2x3 teeth, single action jaws

Catalog # Type Length Diameter 654508 Insert 330mm 5 655508 Insert 360mm 5 656508 Insert 450mm 5

22mm

Claw grasping forceps for retraction, with wavy teeth, double action jaws

Catalog # Type Length Diameter 654509 Insert 330mm 5 655509 Insert 360mm 5 656509 Insert 450mm 5 22mm

DOCUMENT FOR USE IN EUROPE, MIDDLE-EAST AND AFRICA ONLY. 11 12 9 6 10 2 4 8 1 5 7 INCHES 3 10 80 230 40 250 30 240 200 20 90 100 70 60 120 190 210 220 130 160 150 180 140 170 50 110

MILLIMETERS Grasping Forceps -5mm 20mm 10mm 17.6mm 20mm 40mm DOCUMENT FOR USEINEUROPE, MIDDLE-EAST ANDAFRICAONLY. Integra® Jarit™ 3-Piece Modular Grasping forceps with2x4teeth, doubleactionjaws Dorsey grasping forceps, fenestrated, doubleactionjaws Dorsey grasping forceps, fenestrated, singleactionjaws Dorsey grasping forceps, fenestrated, doubleactionjaws Dolphin grasping forceps, doubleactionjaws Catalog # Catalog # Catalog # Catalog # Catalog # 654522 656522 655522 654514 656514 655514 654516 654515 656516 656515 655516 655515 654517 656517 655517 Insert Insert Insert Insert Insert Insert Insert Insert Insert Insert Insert Insert Insert Insert Insert Type Type Type Type Type 450mm 360mm 450mm 360mm 450mm 360mm 330mm 330mm 330mm 450mm 360mm Length Length 450mm Length 360mm 330mm 330mm Length Length Diameter Diameter Diameter Diameter Diameter 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 Integra® Jarit™ 3-Piece Modular

Grasping Forceps - 5mm Grasping forceps with fine crosswise teeth, double action jaws

Catalog # Type Length Diameter 654525 Insert 330mm 5 655525 Insert 360mm 5

29mm 656525 Insert 450mm 5 - Inserts 3-Piece

Grasping forceps with mouse teeth, double action jaws

Catalog # Type Length Diameter 654526 Insert 330mm 5 655526 Insert 360mm 5 656526 Insert 450mm 5 13.5mm

Grasping forceps with mouse teeth, single action jaws

Catalog # Type Length Diameter 654527 Insert 330mm 5 655527 Insert 360mm 5 13.5mm 656527 Insert 450mm 5

Grasping forceps with reservoir, blunt, double action jaws

Catalog # Type Length Diameter 654528 Insert 330mm 5 655528 Insert 360mm 5 656528 Insert 450mm 5 13.4mm

Grasping forceps, double action jaws

Catalog # Type Length Diameter 654531 Insert 330mm 5 655531 Insert 360mm 5 656531 Insert 450mm 5 9.5mm

Grasping forceps, distal with a row of teeth, double action jaws

Catalog # Type Length Diameter 654532 Insert 330mm 5 655532 Insert 360mm 5 656532 Insert 450mm 5 11.5mm

DOCUMENT FOR USE IN EUROPE, MIDDLE-EAST AND AFRICA ONLY. 13 14 9 6 10 2 4 8 1 5 7 INCHES 3 10 80 230 40 250 30 240 200 20 90 100 70 60 120 190 210 220 130 160 150 180 140 170 50 110

MILLIMETERS Grasping Forceps -5mm 17.5mm 11mm 20.4mm 20mm 18mm 23mm DOCUMENT FOR USEINEUROPE, MIDDLE-EAST ANDAFRICAONLY. Integra® Jarit™ 3-Piece Modular Mixter grasping forceps, 90 degrees, doubleactionjaws Maxigrip grasping forceps, doubleactionjaws Wave grasping forceps, fenestrated, doubleaction Kelly grasping forceps, doubleactionjaws Hunter Bowel Grasper, doubleactionjaws Grasping forceps, sharp, crosswise teeth, doubleactionjaws Catalog # Catalog # Catalog # Catalog # Catalog # Catalog # 654540 656540 655540 654544 656544 654542 655544 656542 655542 654539 656539 655539 654535 656535 655535 654541 656541 655541 Insert Insert Insert Insert Insert Insert Insert Insert Insert Insert Insert Insert Insert Insert Insert Insert Insert Insert Type Type Type Type Type Type 450mm 450mm 360mm 360mm 330mm 330mm Length Length 450mm 360mm 330mm 450mm 450mm 450mm 360mm 360mm 360mm 330mm 330mm 330mm Length Length Length Length Diameter Diameter Diameter Diameter Diameter Diameter 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 Integra® Jarit™ 3-Piece Modular

Grasping Forceps - 5mm Universal grasping forceps, double action jaws

Catalog # Type Length Diameter 654552 Insert 330mm 5 655552 Insert 360mm 5

656552 Insert 450mm 5 - Inserts 3-Piece 17.6mm

Wave grasping forceps, fenestrated, double action jaws

Catalog # Type Length Diameter 654553 Insert 330mm 5 655553 Insert 360mm 5 656553 Insert 450mm 5

20 mm

Extracting Forceps - 5mm Extracting forceps with a row of retrograde teeth, double action jaws

Catalog # Type Length Diameter 654519 Insert 330mm 5 655519 Insert 360mm 5 656519 Insert 450mm 5 13.6mm

Clamp - 5mm Babcock clamp, double action jaws

Catalog # Type Length Diameter 654506 Insert 330mm 5 655506 Insert 360mm 5 656506 Insert 450mm 5

31mm

DeBakey clamp, double action jaws

Catalog # Type Length Diameter 654511 Insert 330mm 5 655511 Insert 360mm 5 656511 Insert 450mm 5

28mm

DOCUMENT FOR USE IN EUROPE, MIDDLE-EAST AND AFRICA ONLY. 15 16 9 6 10 2 4 8 1 5 7 INCHES 3 10 80 230 40 250 30 240 200 20 90 100 70 60 120 190 210 220 130 160 150 180 140 170 50 110

MILLIMETERS Scissors -5mm 9mm 11mm 17mm 18mm 17mm 33mm DOCUMENT FOR USEINEUROPE, MIDDLE-EAST ANDAFRICAONLY. Integra® Jarit™ 3-Piece Modular Jarit Supercut™ scissors, straight, singleactionjaws double actionjaws Metzenbaum Preparation Scissors, curved, strong version, serrated, Hook scissors, singleactionjaws Wondercut Preparation Scissors, curved, doubleactionjaws Metzenbaum Preparation Scissors, curved, doubleactionjaws Metzenbaum Preparation Scissors, straight, doubleactionjaws Catalog # Catalog # Catalog # Catalog # Catalog # Catalog # 656700 654700 655700 656704 654704 655704 656702 654702 654708 656708 655702 655708 656701 654701 655701 654712 656712 655712 Insert Insert Insert Insert Insert Insert Insert Insert Insert Insert Insert Insert Insert Insert Insert Insert Insert Insert Type Type Type Type Type Type 450mm 450mm 450mm 360mm 360mm 360mm 450mm 450mm 360mm 360mm 450mm 360mm 330mm 330mm 330mm 330mm 330mm 330mm Length Length Length Length Length Length Diameter Diameter Diameter Diameter Diameter Diameter 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 Integra® Jarit™ 3-Piece Modular

Needle Holder - 5mm Needle holder, straight, with inserted tungsten carbide, crosswise teeth, single action jaws

Catalog # Type Length Diameter 654900 Insert 330mm 5 655900 Insert 360mm 5 - Inserts 3-Piece 11mm 656900 Insert 450mm 5

Needle holder, left curved, with inserted tungsten carbide, crosswise teeth, single action jaws

Catalog # Type Length Diameter 654901 Insert 330mm 5 655901 Insert 360mm 5 11mm 656901 Insert 450mm 5

Needle holder, right curved, with inserted tungsten carbide, crosswise teeth, single action jaws

Catalog # Type Length Diameter 654902 Insert 330mm 5 655902 Insert 360mm 5 11mm 656902 Insert 450mm 5

DOCUMENT FOR USE IN EUROPE, MIDDLE-EAST AND AFRICA ONLY. 17 18 9 6 10 2 4 8 1 5 7 INCHES 3 10 80 230 40 250 30 240 200 20 90 100 70 60 120 190 210 220 130 160 150 180 140 170 50 110

MILLIMETERS Grasping Forceps -10mm 20.5mm 29mm 28mm 29mm 24mm DOCUMENT FOR USEINEUROPE, MIDDLE-EAST ANDAFRICAONLY. Integra® Jarit™ 3-Piece Modular Mixter grasping forceps, double actionjaws forceps, doubleactionjaws Claw Grasping forceps, 2x3teeth, doubleactionjaws Claw Grasping forceps, 2x3teeth, singleactionjaws Maryland dissecting forceps, doubleactionjaws Catalog # Catalog # Catalog # Catalog # Catalog # 656606 654606 655606 656605 654605 655605 654304 656304 655304 656622 654622 655622 656621 654621 655621 Insert Insert Insert Insert Insert Insert Insert Insert Insert Insert Insert Insert Insert Insert Insert Type Type Type Type Type 450mm 450mm 360mm 360mm 450mm 360mm 330mm 330mm 450mm 360mm 330mm 330mm Length Length Length Length 450mm 360mm 330mm Length Diameter Diameter Diameter Diameter Diameter 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 Integra® Jarit™ 3-Piece Modular

Dissecting Forceps - 10mm Dissecting forceps, right angle, double action jaws

Catalog # Type Length Diameter 654303 Insert 330mm 10 655303 Insert 360mm 10

656303 Insert 450mm 10 - Inserts 3-Piece 23.6mm

Clamp - 10mm Overhold clamp with fine teeth, curved, double action jaws

Catalog # Type Length Diameter 654623 Insert 330mm 10 655623 Insert 360mm 10 656623 Insert 450mm 10

30mm

DOCUMENT FOR USE IN EUROPE, MIDDLE-EAST AND AFRICA ONLY. 19

One-Piece Instruments 22 9 6 10 2 4 8 1 5 7 INCHES 3 10 80 230 40 250 30 240 200 20 90 100 70 60 120 190 210 220 130 160 150 180 140 170 50 110

MILLIMETERS Fan Retractors Catalog # Catalog # Catalog # 600540 653205 653203 653105 653201 653103 653101 Type Type Type Fan Fan Fan Fan Fan Fan Fan 450mm 450mm 360mm 360mm 380mm 330mm 330mm Length Length Length DOCUMENT FOR USEINEUROPE, MIDDLE-EAST ANDAFRICAONLY. Integra® Jarit™ One-Piece Diameter Diameter Diameter 10 10 10 10 5 5 5 Five fingers, 55mm spread articulating,45°angleable, 42mm fan bladelength Five fingers, 55mm spread articulating,45°angleable, 42mm fan bladelength Description closed position Five Finger Liver Elevator withupto 60ºspread and80ºLift Functions, 58mm fan bladelength,in Description Five fingers, 95mm spread articulating,45°angleable, 72.5mm fan bladelength Five fingers, 95mm spread articulating,45°angleable, 72.5mm fan bladelength Description Five fingers, 55mm spread articulating,45°angleable, 42mm fan bladelength Five fingers, 95mm spread articulating,45°angleable, 72.5mm fan bladelength Integra® Jarit™ One-Piece

Forceps

Spoon Forceps Wide cup-shaped jaws 17 mm for tissue or stone removal. 600138 Spring-loaded, 10mm, 335mm One-Piece - Forceps

(Locking Lever Shown)

625165LL 610166 Roto-Lok™, Roto-Lok™, locking lever, slide lock, insulated shaft, insulated shaft, 5mm, 463mm 5mm, 403mm, 45mm jaw length

Strong TC Grasping Forceps Heavy Carb-Bite™ inserts, 625103 double action. Roto-Lok™, 17 mm ratchet, insulated shaft, 5mm, 377mm

Anvil Grasping Forceps Jaws specially shaped 625154 to grasp and hold the Roto-Lok™, anvil of a circular stapler. ratchet, 25 mm 10mm, 370mm

Biopsy Forceps 3 mm 630178 Monopolar, 3.5mm, 240mm

DOCUMENT FOR USE IN EUROPE, MIDDLE-EAST AND AFRICA ONLY. 23 24 9 6 10 2 4 8 1 5 7 INCHES 3 10 80 230 40 250 30 240 200 20 90 100 70 60 120 190 210 220 130 160 150 180 140 170 50 110

MILLIMETERS Needle holders 13 mm 11 mm 12 mm 14 mm 13.5 mm DOCUMENT FOR USEINEUROPE, MIDDLE-EAST ANDAFRICAONLY. Integra® Jarit™ One-Piece open withthesamesuperior holdofneedles. In-line ringhandleoffers ahandledesignsimilar to thatusedin In-line Carb-Bite™ NeedleHolders smaller. For usewith5-0suture and Appel NeedleHolders instrument. needle and long life of the for afirm,secure griponthe Carb-Bite™ jaws are designed visibility atthesuture site; needle whileallowingbetter Tapered jaws stabilize the Appel NeedleHolders any anglewithinthejaws. needles heldvery securely at curvedself-right needles; jaws Up-curved, Jarit Stardust™ Needle Holder Romeo Self-Righting

Left Curve, 5mm,450mm 600254 5mm, 330mm Left Curve, 600250 5mm, 330mm Straight, 600260 3.5mm, 240mm Left Curve, 630250 5mm, 325mm Up-curve, 600266

3.5mm, 320mm Left Curve, 632250 Integra® Jarit™ One-Piece

Other instruments

Cholangiogram Clamp Channel for placement of 9 mm 5Fr or smaller cholangiogram 600400 . Ratchet, 5mm, 330mm

Cholangiogram Guide Curved tip for simple placement One-Piece - Other instruments of cholangiogram catheter. 600410 5mm, 320mm total length

Articulators Articulate rapidly from 0° to 90°; bi-directional Roto-Lok™ wheel.

Articulator Retractor 30 mm S-shaped distal tip for atraumatic 600584 retraction of the esophagus; Roto-Lok™, keyhole for maneuvering locking lever, ® penrose or LAP-BAND 10mm, 410mm System.

Stone Extractor 14 mm To facilitate stone removal once neck of gallbladder has been 24 mm externalized. 600520 1 7 ⁄2˝ (193mm)

DOCUMENT FOR USE IN EUROPE, MIDDLE-EAST AND AFRICA ONLY. 25 26 9 6 10 2 4 8 1 5 7 INCHES 3 10 80 230 40 250 30 240 200 20 90 100 70 60 120 190 210 220 130 160 150 180 140 170 50 110

MILLIMETERS Other instruments 27 mm DOCUMENT FOR USEINEUROPE, MIDDLE-EAST ANDAFRICAONLY. Integra® Jarit™ One-Piece 3.5mm cannulas available. for stronger vacuum pressures; sticking ofvalves andallows clogging ofcannulaand straight offendminimizes irrigation; suction connection cannula for standard suction/ viscous drainage, and5mm hematomas, gallstones, and cannula for aspiration of Set includeshandpiece, 10mm Suction/Irrigation Set 14 gaugeneedle. for pneumoperitoneum, myoma. securing ofthick-walled For manipulationand Myoma Screws and introduction ofCO allows initialpuncture Internal safety shield Veress Needles knot pushers isminimized. experienced withstandard the twisting ofsuture thatis repositioning theknotpusher; be tiedandpassed without knots to suture site; knotscan guiding ofextracorporeal Unique designfacilitates the Appel KnotPushers 2

410mm total length 10mm, 600285 5mm, 330mm 615210 Includes 5mmand10mmcannulas 10mm, 330mm color coded Suction/irrigation cannula 600340 120mm 600480

150mm 600481 Accessories

Accessories Integra® Jarit™ Accessories

Cleaning and Storage Accessories Full-Size (23" x 11") Containers

Solid Bottom Solid Bottom Perforated Bottom Perforated Bottom Height Full Container Only Full Container Only Catalog # Catalog # Catalog # Catalog #

6" 730602 730602B 730612 730612B 8" 730603 730603B 730613 730613B 10" 730604 730604B 730614 730614B

Commonly used with standard length instruments and the laparoscopic rack

Instrument Rack

Catalog # Description 790010(*) Instrument rack with silicone instrument holders, space for up to 9 instruments

Laparoscopic Case

Catalog # Description 600618 Length 57.9cm, 223/4" x 11" x 8" (579mm x 282mm x 203mm)

Laparoscopic Bariatric Case

Catalog # Description 600620 Length 68.1cm, 263/4" x 11" x 8" (681mm x 282mm x 203mm)

Cleaning Brush

Catalog # Type Length Description 643100(*) For all shafts 425mm Cleaning Brush

(*) Not a medical device

DOCUMENT FOR USE IN EUROPE, MIDDLE-EAST AND AFRICA ONLY. 28 Integra® Jarit™ Accessories

Instrument Holder

The articulated Integra Jarit™ Endoscope & Instrument Holder System is a robust and simple system that will provide added stability and precision to the OR setting.

The Integra Jarit™ Endoscopic & Instrument Holder System can be used with instruments with 5mm or Accessories 10mm diameter.

Endoscope and Instrument Holder

Catalog # Description 620800 Complete set includes the following components: • Articulated arm with Endoscope & Instrument Clamp 5/10mm (One-Piece), 85cm total length • Rail Clamping Base, double clamp (620804)

Bariatric Endoscope and Instrument Holder

Catalog # Description 620805 Complete set includes the following components: • Articulated arm with Endoscope & Instrument Clamp 5/10mm (One-Piece), 100cm total length • Rail Clamping Base, double clamp (620804)

Electrosurgical Accessory Monopolar Cable 600290B 10' (3m)

IMPORTANT: When disconnecting electrosurgical cables from the generator or instrument, always grasp the cables by the connector only. Never pull the cable by the cord. Do not use instruments or cables if the insulation is not fully intact.

DOCUMENT FOR USE IN EUROPE, MIDDLE-EAST AND AFRICA ONLY. 29

Laparoscopic Suggested Sets Integra® Jarit™ Laparoscopic Suggested Sets

+ + =

Suggested Set for Laparoscopic Cholecystectomy

Qty Insert Catalog # Length Diameter Description 1 655504 360mm 5 Atraumatic grasping forceps, with wavy teeth and reservoir, double action jaws 1 655505 360mm 5 Atraumatic grasping forceps, with wavy teeth and reservoir, single action jaws 1 655552 360mm 5 Universal grasping forceps, double action jaws 1 655532 360mm 5 Grasping forceps, distal with a row of teeth, double action jaws 1 655515 360mm 5 Dorsey grasping forceps, fenestrated, double action jaws 1 655541 360mm 5 Maryland grasping forceps, double action jaws 1 655205 360mm 5 Dissecting forceps, tapered, double action jaws 1 655201 360mm 5 Dissecting forceps, fenestrated, double action jaws 1 655544 360mm 5 Mixter grasping forceps, 90 degrees, double action jaws 1 655508 360mm 5 Claw grasping and extracting forceps, 2+3 teeth, single action jaws 1 655704 360mm 5 Hook scissors, single action jaws 1 655708 360mm 5 Metzenbaum Preparation Scissors, curved, strong version, serrated, double action jaws

Qty Shaft Catalog # Length Diameter Description 12 652503 360mm 5 Tube shaft 5mm, insulated, with Luer lock

Handle Selections

Catalog # Description 652106 Axial handle, spreading spring and ratchet 652107 Axial handle, spreading spring 652108 Axial angled handle, spreading spring and ratchet 652110 Ergonomic ring handle with rotation, stepless ratchet, release key and HF connection 652112 Ergonomic ring handle with rotation and HF connection 652113 Ergonomic ring handle with rotation, ratchet, push button release and HF connection Be sure to select as many handles as inserts/shafts

Additional Suggested Instrumentation

Qty Catalog # Description 1 653101 Five fingers, 55mm spread articulating, 45° angleable, 42mm fan blade length 1 655901 Needle holder, left curved, with insterted tungsten carbide, crosswise teeth, single action jaws (*) 2 625165LL Rot-Lock Hunter, 5mm 730603 790010 Solid bottom, Instrument Rack 1 600287 Appel Knot Pusher, 5mm Full size container 1 600138 Jarit Spoon Forceps, 10mm 1 600520 Stone Extractor 1 600400 Cholangiogram Clamp w/Ratchet 1 600410 Cholangiogram Guide

(*) Not a medical device

DOCUMENT FOR USE IN EUROPE, MIDDLE-EAST AND AFRICA ONLY. 32 Integra® Jarit™ Laparoscopic Suggested Sets

+ + =

Suggested Set for Laparoscopic Appendectomy

Qty Insert Catalog # Length Diameter Description 1 655504 360mm 5 Atraumatic grasping forceps, with wavy teeth and reservoir, double action jaws 1 655505 360mm 5 Atraumatic grasping forceps, with wavy teeth and reservoir,single action jaws 1 655515 360mm 5 Dorsey grasping forceps, fenestrated, double action jaws 1 655506 360mm 5 Babcock clamp, double action jaws 1 655541 360mm 5 Maryland grasping forceps, double action jaws 1 655205 360mm 5 Dissecting forceps, tapered, double action jaws Sets Suggested Laparoscopic 1 655544 360mm 5 Mixter grasping forceps, 90 degrees, double action jaws 1 655508 360mm 5 Claw grasping and extracting forceps, 2+3 teeth, single action jaws 1 655708 360mm 5 Metzenbaum Preparation Scissors, curved, strong version, serrated, double action jaws

Qty Shaft Catalog # Length Diameter Description 9 652503 360mm 5 Tube shaft 5mm, insulated, with Luer lock

Handle Selections

Catalog # Description 652106 Axial handle, spreading spring and ratchet 652107 Axial handle, spreading spring 652108 Axial angled handle, spreading spring and ratchet 652110 Ergonomic ring handle with rotation, stepless ratchet, release key and HF connection 652112 Ergonomic ring handle with rotation and HF connection 652113 Ergonomic ring handle with rotation, ratchet, push button release and HF connection Be sure to select as many handles as inserts/shafts

Additional Suggested Instrumentation

Qty Catalog # Description 1 653101 Five fingers, 55mm spread articulating, 45° angleable, 42mm fan blade length 1 655901 Needle holder, left curved, with insterted tungsten carbide, crosswise teeth, single action jaws (*) 1 600287 Appel Knot Pusher, 5mm 730603 790010 Solid bottom, Instrument Rack 1 600138 Jarit Spoon Forceps, 10mm Full size container

(*) Not a medical device

DOCUMENT FOR USE IN EUROPE, MIDDLE-EAST AND AFRICA ONLY. 33 Integra® Jarit™ Laparoscopic Suggested Sets

+ + =

Suggested Set for Laparoscopic Bariatric Procedure

Qty Insert Catalog # Length Diameter Description 3 656504 450mm 5 Atraumatic grasping forceps, with wavy teeth and reservoir, double action jaws 1 656544 450mm 5 Mixter grasping forceps, 90 degrees, double action jaws 3 656539 450mm 5 Hunter Bowel Grasper, double action jaws 1 656541 450mm 5 Maryland grasping forceps, double action jaws

Qty Shaft Catalog # Length Diameter Description 8 652505 450mm 5 Tube shaft 5mm, insulated, with Luer lock

Handle Selections

Catalog # Description 652106 Axial handle, spreading spring and ratchet 652107 Axial handle, spreading spring 652108 Axial angled handle, spreading spring and ratchet 652110 Ergonomic ring handle with rotation, stepless ratchet, release key and HF connection 652112 Ergonomic ring handle with rotation and HF connection 652113 Ergonomic ring handle with rotation, ratchet, push button release and HF connection Be sure to select as many handles as inserts/shafts

Additional Suggested Instrumentation

Qty Catalog # Description 1 653105 Five fingers, 55mm spread articulating, 45° angleable, 42mm fan blade length 1 656901 Needle holder, left curved, with insterted tungsten carbide, crosswise teeth, single action jaws (*) 1 610166 SL Roto-Lock Hunter bowel grasper, 5mm, 730603 790010 45mm jaw Solid bottom, Instrument Rack Full size container 1 625103 Roto-Lock Strong, TC Grasper, 5mm

(*) Not a medical device

DOCUMENT FOR USE IN EUROPE, MIDDLE-EAST AND AFRICA ONLY. 34 Integra® Jarit™ Laparoscopic Suggested Sets

+ + =

Alternate Suggested Set for Laparoscopic Bariatric Procedure

Qty Insert Catalog # Length Diameter Description 1 656704 450mm 5 Hook scissors, single action jaws 1 656509 450mm 5 Claw grasping forceps for retraction, with wavy teeth, double action jaws 1 656541 450mm 5 Maryland grasping forceps, double action jaws 2 656539 450mm 5 Hunter Bowel Grasper, double action jaws 1 656702 450mm 5 Wondercut Preparation Scissors, curved, double action jaws Laparoscopic Suggested Sets Suggested Laparoscopic

Qty Shaft Catalog # Length Diameter Description 7 652505 450mm 5 Tube shaft 5mm, insulated, with Luer lock

Handle Selections

Catalog # Description 652106 Axial handle, spreading spring and ratchet 652107 Axial handle, spreading spring 652108 Axial angled handle, spreading spring and ratchet 652110 Ergonomic ring handle with rotation, stepless ratchet, release key and HF connection 652112 Ergonomic ring handle with rotation and HF connection 652113 Ergonomic ring handle with rotation, ratchet, push button release and HF connection Be sure to select as many handles as inserts/shafts

Additional Suggested Instrumentation

Qty Catalog # Description 1 653105 Five fingers, 55mm spread articulating, 45° angleable, 42mm fan blade length 1 656901 Needle holder, left curved, with insterted tungsten carbide, crosswise teeth, single action jaws 730603 790010(*) 2 625165LL Roto-Lok™ Hunter bowel grasper, 5mm Solid bottom, Instrument Rack 1 625154 Anvil Grasping Forceps, Roto-Lock Full size container 1 600266 Romeo Self-Righting Needle Holder, 5mm 1 600584 Articular Esophagus Retractor, 10mm 1 600254 In-Line Carb-Bite™ Needle Holder, Left Curve

(*) Not a medical device

DOCUMENT FOR USE IN EUROPE, MIDDLE-EAST AND AFRICA ONLY. 35

Numerical Index Alphabetical Index Numerical Index

#

600138 ����������������������������������23, 32, 33 654506 �����������������������������������������������15 655525 ������������������������������������������������13 656542 ������������������������������������������������14 600250 ����������������������������������������������24 654508 ����������������������������������������������� 11 655526 ������������������������������������������������13 656544 �����������������������������������������14, 34 600254 ��������������������������������������� 24, 35 654509 ����������������������������������������������� 11 655527 ������������������������������������������������13 656552 ������������������������������������������������15 600260 ���������������������������������������������24 654511 �������������������������������������������������15 655528 ������������������������������������������������13 656553 ������������������������������������������������15 600266 ��������������������������������������� 24, 35 654514 ������������������������������������������������12 655531 �������������������������������������������������13 656605 �����������������������������������������������18 600285 ����������������������������������������������26 654515 ������������������������������������������������12 655532 ����������������������������������������� 13, 32 656606 �����������������������������������������������18 600287 ����������������������������������������32, 33 654516 ������������������������������������������������12 655535 ������������������������������������������������14 656621 ������������������������������������������������18 600290B �������������������������������������������29 654517 ������������������������������������������������12 655539 ������������������������������������������������14 656622 �����������������������������������������������18 600340 ����������������������������������������������26 654519 ������������������������������������������������15 655540 �����������������������������������������������14 656623 ����������������������������������������������� 19 600400 �������������������������������������� 25, 32 654522 ������������������������������������������������12 655541 ���������������������������������� 14, 32, 33 656700 �����������������������������������������������16 600410 ��������������������������������������� 25, 32 654525 ������������������������������������������������13 655542 ������������������������������������������������14 656701 ������������������������������������������������16 600480 ���������������������������������������������26 654526 ������������������������������������������������13 655544 ���������������������������������� 14, 32, 33 656702 ����������������������������������������16, 35 600481 ����������������������������������������������26 654527 ������������������������������������������������13 655552 �����������������������������������������15, 32 656704 ����������������������������������������16, 35 600520 ��������������������������������������� 25, 32 654528 ������������������������������������������������13 655553 ������������������������������������������������15 656708 �����������������������������������������������16 600540 ����������������������������������������������22 654531 ������������������������������������������������13 655605 �����������������������������������������������18 656712 ������������������������������������������������16 600584 ����������������������������������������25, 35 654532 ������������������������������������������������13 655606 �����������������������������������������������18 656900 �����������������������������������������������17 600618 ����������������������������������������������28 654535 ������������������������������������������������14 655621 ������������������������������������������������18 656901 �����������������������������������17, 34, 35 600620 ���������������������������������������������28 654539 ������������������������������������������������14 655622 ������������������������������������������������18 656902 �����������������������������������������������17 610166 ���������������������������������������� 23, 34 654540 �����������������������������������������������14 655623 ����������������������������������������������� 19 730602 ����������������������������������������������28 615210 �����������������������������������������������26 654541 ������������������������������������������������14 655700 �����������������������������������������������16 730602B ��������������������������������������������28 620800 ����������������������������������������������29 654542 ������������������������������������������������14 655701 ������������������������������������������������16 730603 ��������������������28, 32, 33, 34, 35 620804 ����������������������������������������������29 654544 ������������������������������������������������14 655702 ������������������������������������������������16 730603B ��������������������������������������������28 620805 ����������������������������������������������29 654552 ������������������������������������������������15 655704 �����������������������������������������16, 32 730604 ����������������������������������������������28 625103 ���������������������������������������� 23, 34 654553 ������������������������������������������������15 655708 ���������������������������������� 16, 32, 33 730604B ��������������������������������������������28 625154 �����������������������������������������23, 35 654605 �����������������������������������������������18 655712 ������������������������������������������������16 730612 �����������������������������������������������28 625165LL ������������������������������23, 32, 35 654606 �����������������������������������������������18 655900 �����������������������������������������������17 730612B ���������������������������������������������28 630178 ����������������������������������������������� 23 654621 ������������������������������������������������18 655901 �����������������������������������17, 32, 33 730613 �����������������������������������������������28 630250 ����������������������������������������������24 654622 ������������������������������������������������18 655902 �����������������������������������������������17 730613B ���������������������������������������������28 632250 �����������������������������������������������24 654623 ����������������������������������������������� 19 656100 ���������������������������������������������� 10 730614 �����������������������������������������������28 643100(*) ��������������������������������������������28 654700 �����������������������������������������������16 656101 ����������������������������������������������� 10 730614B ���������������������������������������������28 652106 �����������������������8, 32, 33, 34, 35 654701 ������������������������������������������������16 656103 ����������������������������������������������� 10 790010(*) ������������������28, 32, 33, 34, 35 652107 �����������������������8, 32, 33, 34, 35 654702 ������������������������������������������������16 656200 ���������������������������������������������� 10 652108 �����������������������8, 32, 33, 34, 35 654704 ������������������������������������������������16 656201 ����������������������������������������������� 10 652110 ������������������������8, 32, 33, 34, 35 654708 ������������������������������������������������16 656204 ���������������������������������������������� 10 652112 ������������������������8, 32, 33, 34, 35 654712 ������������������������������������������������16 656205 ���������������������������������������������� 10 652113 ������������������������8, 32, 33, 34, 35 654900 �����������������������������������������������17 656303 ����������������������������������������������� 19 652501 �������������������������������������������������9 654901 ������������������������������������������������17 656304 �����������������������������������������������18 652503 ������������������������������������9, 32, 33 654902 �����������������������������������������������17 656500 ����������������������������������������������� 11 652505 �����������������������������������9, 34, 35 655100 ����������������������������������������������� 10 656504 �����������������������������������������11, 34 652601 �������������������������������������������������9 655101 ����������������������������������������������� 10 656505 ����������������������������������������������� 11 652603 ������������������������������������������������9 655103 ����������������������������������������������� 10 656506 �����������������������������������������������15 652605 ������������������������������������������������9 655200 ���������������������������������������������� 10 656508 ����������������������������������������������� 11 653101 �����������������������������������22, 32, 33 655201 �����������������������������������������10, 32 656509 �����������������������������������������11, 35 653103 �����������������������������������������������22 655204 ���������������������������������������������� 10 656511 �������������������������������������������������15 653105 ����������������������������������22, 34, 35 655205 ���������������������������������10, 32, 33 656514 ������������������������������������������������12 653201 �����������������������������������������������22 655303 ����������������������������������������������� 19 656515 ������������������������������������������������12 653203 �����������������������������������������������22 655304 �����������������������������������������������18 656516 ������������������������������������������������12 653205 �����������������������������������������������22 655500 ����������������������������������������������� 11 656517 ������������������������������������������������12 654100 ����������������������������������������������� 10 655504 ���������������������������������� 11, 32, 33 656519 ������������������������������������������������15 654101 ����������������������������������������������� 10 655505 ���������������������������������� 11, 32, 33 656522 ������������������������������������������������12 654103 ����������������������������������������������� 10 655506 ���������������������������������������� 15, 33 656525 ������������������������������������������������13 654200 ���������������������������������������������� 10 655508 ���������������������������������� 11, 32, 33 656526 ������������������������������������������������13 654201 ����������������������������������������������� 10 655509 ����������������������������������������������� 11 656527 ������������������������������������������������13 654204 ���������������������������������������������� 10 655511 �������������������������������������������������15 656528 ������������������������������������������������13 654205 ���������������������������������������������� 10 655514 ������������������������������������������������12 656531 ������������������������������������������������13 654303 ����������������������������������������������� 19 655515 ���������������������������������� 12, 32, 33 656532 ������������������������������������������������13 654304 �����������������������������������������������18 655516 ������������������������������������������������12 656535 ������������������������������������������������14 654500 ����������������������������������������������� 11 655517 �������������������������������������������������12 656539 ���������������������������������� 14, 34, 35 654504 ����������������������������������������������� 11 655519 ������������������������������������������������15 656540 �����������������������������������������������14 654505 ����������������������������������������������� 11 655522 ������������������������������������������������12 656541 ���������������������������������� 14, 34, 35 (*) Not a medical device

DOCUMENT FOR USE IN EUROPE, MIDDLE-EAST AND AFRICA ONLY. 38 Alphabetical Index

A H O

Accessories...... 27 Handles...... One-Piece instruments...... 21 Axial-Style Handle...... 8 Articulator/Retractor...... 25 Ergonomic Ring Handle...... 8 Biopsy Forceps...... 23 B Cholangiogram Instruments...... 25 Fan Retractors ...... 22 Biopsy Cup 5mm...... 8 Grasping Forceps...... 23 Bowel Grasping Forceps...... 14 I Needle Holders...... 24 Roto-Lok™ Forceps...... 23 Inserts...... Spoon Forceps...... 23 Biopsy Cup 5mm...... 10 Stone Extractor...... 25 C Bowel Grasping Forceps...... 14 Clamps...... 15, 19 Cable, monopolar...... 29 Grasping Forceps 10mm ...... 18 S Cases ...... 28 Needle Holders...... 17 Clamp 5mm...... 15, 25 Scissors...... 16 Scissors...... Clamp 10mm...... 19 Numerical & Alphabetical index Straight...... 16 Cleaning Accessory...... 28 Instrument Rack...... 28 Curved.16 Containers ...... 28 Instrument Holders...... 29 Single Action...... 16 Supercut™...... 16

D K Shafts. Shaft - 5mm...... 9 Dissecting Forceps, Fenestrated...... 10 Knot Pusher...... 26 Shaft - 10mm...... 9 Dissecting Forceps, Tapered...... 10 Dissecting Forceps 10mm...... 18 L Suction/irrigation Set...... 26 Suggested Sets...... 31 Laparoscopic/Bariatric Cases...... 28 E for Laparoscopic Cholecystectomy...... 32 for Laparoscopic Appendectomy...... 33 Electrosurgical accessory...... 29 for Laparoscopic Bariatric Procedure...... 34, 35 Ergonomic Ring Handle...... 8 M Extracting Forceps...... 15 Modular instruments, 3-Piece...... 5 Handles...... 8 V Inserts ...... 10, 11, 12, 13, 14, 15, 16, 17, 18, 19 Veress Needles...... 26 F Shafts ...... 9

Fan Retractors ...... 22 Myoma Screw...... 26

Forceps...... Bowel Grasping Forceps...... 14 N Dissecting Forceps...... 10, 18 Extracting Forceps...... 15 Needle Holders...... Grasping Forceps...... 11, 12, 13, 14, 15, 18 Straight...... 17 Right Curved ...... 17 Left Curved...... 17 G

Grasping Forceps, Claw...... 11, 18 Grasping Forceps, Atraumatic...... 11 Grasping Forceps, Dolphin ...... 12 Grasping Forceps, with teeth...... 11, 12, 13, 14, 18 Grasping Forceps, with reservoir...... 11, 13 Grasping Forceps, 90° angled...... 14 Grasping Forceps 10mm ...... 18

DOCUMENT FOR USE IN EUROPE, MIDDLE-EAST AND AFRICA ONLY. 39 Distributed by

For more information or to place an order, please contact: Sales & Marketing EMEA Manufacturer: Integra LifeSciences Services (France) SAS Integra LifeSciences Services (France) SAS Immeuble Séquoia 2 97 allée Alexandre Borodine Immeuble Séquoia 2 ▪ 97 allée Alexandre Borodine ▪ Integra York PA, Inc Parc technologique de la Porte des Alpes Parc technologique de la Porte des Alpes 589 Davies Drive 69800 Saint Priest FRANCE 69800 Saint Priest ▪ FRANCE ▪ York, PA 17402 ▪ USA +33 (0)4 37 47 59 00 phone ▪ +33 (0)4 37 47 59 99 fax [email protected] ▪ integralife.eu Customer Services Availability of these products might vary from a given country or region to another, as a result of specific local regulatory France / International : +33 (0) 4 37 47 59 10 i +33 (0) 470 67 98 20 (Fax) i [email protected] approval or clearance requirements for sale in such country or region. United Kingdom : +44 (0) 1264 312 725 i +44 (0) 1264 312 821 (Fax) i [email protected] ▪ Consult product labels and insert for any indication, contraindications, hazards, warnings, precautions and instruction for use. Germany : +49 (0) 2102 5535 6200 i +49 (0) 2102 5536 636 (Fax) i [email protected] ▪ Non contractual document. The manufacturer reserves the right, without prior notice, to modify the products in order to Benelux: +32 (0)2 257 41 30 i +32 (0)2 253 24 66 (Fax) i [email protected] improve their quality. Italy : +39 (0) 2 577 89 21 i +39 (0) 2 575 11 371 (Fax) i [email protected] ▪ Warning: Applicable laws restrict these products to sale by or on the order of a physician. Products mentioned in this document are CE class I, IIa or IIb devices. Please contact Integra customer service should you need any additional information on devices classification. All the medical devices mentioned on this document are CE marked according to European council directive 93/42/EEC on medical devices and its relatives. References that are not medical devices are identified with the indication “NOT A MEDICAL DEVICE”. Integra and the Integra logo are registered trademarks of Integra LifeSciences Corporation in the United States and/or other countries. Jarit™, Carb-Bite™, Jarit Supercut™, Roto-Cam™ and Roto-Lok™ are trademarks of J. Jamner Surgical Instruments, Inc., a subsidiary of Integra LifeSciences Corporation. ©2017 Integra LifeSciences Corporation. All rights reserved. Last revision date: 02/2017. 0596093-1-EN DOCUMENT FOR USE IN EUROPE, MIDDLE-EAST and AFRICA ONLY.