– CITROEN OBD APPLICATION

SYSTEM PIN CODE KEY/REMOTE PROG. APP.LIST NOTE

*Pin code extraction might take up to 30 minutes. *While extracting pin code wipers will work, it is recommended to remove the wiper fuse(located close to the wipers *Citroen C4 2005-2010 under the hood) to save battery. *Citroen C5 2005-2013 *It is strongly recommended to use a *A blank Pcf7936 and original *Citroen Berlingo 2008+ jump pack and start procedure with a remote key can be programmed. * 2005-2013 fully charged battery. *Remotes will automatically be * 2005-2013 *Be careful not to move the Zed-FULL programmed to the car after a * obd cable and car's OBD port successfull key programming. * Generally Can bus system JOHNSON connection. *To have the remotes *Citroen Jumpy 2008+ PSA cars after 2008 have *If for any reason the process is functioning, ignition should be CONTROL *Peugeot Partner/Partner this BSI. interrupted, vehicle data will be erased turned on with that remote key. Tepee 2008+ and car won't work. If this happens, as *All keys are deleted and *Peugeot RCZ soon as Zed-FULL is connected back to programmed back with new * 2005+ the car and pin code menu is selected, keys, so there is no add key *Peugeot 807 2005+ original vehicle data will be written back procedure. * 2008+ to the car and procedure can be repeated. *If pin code is extracted once, second time and the next time for the same car, pin code extraction will take about 5 minutes

*Pin code extraction might take up to 2 minutes. *While extracting pin code wipers will *A blank Pcf7936 and original work, it is recommended to remove the remote key can be programmed. wiper fuse(located close to the wipers *Remotes will automatically be * 2005-2013 under the hood) to save battery. programmed to the car after a * 2005-2013 *It is strongly recommended to use a successfull key programming. *Peugeot 208 2005-2013 jump pack and start procedure with a *To have the remotes *Citroen C3 2005-2013 VALEO fully charged battery. functioning, ignition should be *Citroen C2 2005-2013 *If for any reason the process is turned on with that remote key. *Citroen C4 2005-2010 interrupted, vehicle data will not be *All keys are deleted and erased and car will work. If wipers programmed back with new continue to work or there is another keys, so there is no add key problem disconnect the battery and procedure. reconnect to fix the problem

*Pin code extraction might take up to 45 seconds. *A blank Pcf7936 and original *While extracting pin code wipers will remote key can be programmed. work, it is recommended to remove the *Remotes will automatically be wiper fuse(located close to the wipers programmed to the car after a under the hood) to save battery. *2010 + Citroen C4, successfull key programming. *It is recommended to start procedure . *To have the remotes Uds system PSA cars, with a fully charged battery. *Citroen Ds3 CONTINENTAL functioning, ignition should be generally after 2010 *If for any reason the process is *Citroen Ds4 turned on with that remote key. interrupted, vehicle data will not be *Citroen Ds5 *All keys are deleted and erased and car will work. If wipers programmed back with new continue to work or there is another keys, so there is no add key problem disconnect the battery and procedure. reconnect to fix the problem

*Pin code extraction might take up to 45 seconds. *A blank Pcf7936 and original *While extracting pin code wipers will remote key can be programmed. work, it is recommended to remove the *Remotes will automatically be wiper fuse(located close to the wipers programmed to the car after a under the hood) to save battery. successfull key programming. *It is recommended to start procedure *To have the remotes with a fully charged battery. 2004-2008 Peugeot 407 SIEMENS functioning, ignition should be *If for any reason the process is turned on with that remote key. interrupted, vehicle data will not be *All keys are deleted and erased and car will work. If wipers programmed back with new continue to work or there is another keys, so there is no add key problem disconnect the battery and procedure. reconnect to fix the problem

*A blank Pcf7936 and original remote key can be programmed. *Remotes will automatically be programmed to the car after a *All PSA cars before 2004 successfull key programming. * all years *To have the remotes *Peugeot Partner up to K-line PSA cars generally Pin code can not be extracted via OBD K-LINE functioning, ignition should be 2008 before 2005 turned on with that remote key. *Citroen Berlingo up to *All keys are deleted and 2008 programmed back with new keys, so there is no add key procedure.