DOCSLIB.ORG

Physics 42 Lab: Static Electricity

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Physics 42 Lab: Static Electricity Physics 42 Lab: Static Electricity Charge can neither be created nor destroyed: it can only be moved around! The purpose of the lab is to play with static electricity by moving charge around. You will charge objects by friction, induction and polarization and determine the charge with an electroscope. You will draw cute pictures showing each step and how the charges distribute to result in a final charge. The following cartoon sketch is an example of showing how a metallic sphere is charged by induction using a ground. This is the type of sketch you will draw today for each activity, describing what is happening for each step and summarizing your results. I will grade your lab based on neatness and clear explanations! Sample: Charging a metal sphere by induction using a negatively charged rod (a) A neutral metallic sphere, with equal numbers of positive and negative charges. (b) The electrons on the neutral sphere are redistributed when a charged negatively charge rubber rod is placed near the sphere. (c) When the sphere is grounded, some of its electrons leave through the ground wire. (d) When the ground connection is removed while leaving the rod close to the sphere, the sphere has excess positive charge that is nonuniformly distributed. (e) When the rod is removed, the remaining electrons redistribute uniformly and there is a net uniform distribution of positive charge on the sphere. Summary: Charging a neutral metal sphere by induction using a negative rod results in a positive charged sphere! **************************************************************************************** PARTS LIST: 1 Electroscope, 2 Conducting Spheres, Electrometer and cage with cables, wrist grounding wire, grounding wire, proof plane, assorted rods and fabrics ***************************************************************************************** WARNING: GROUND EVERTHING INCLUDING YOURSELF TO REMOVE EXCESS CHARGE AFTER EVERY PROCEDURE!!!! Part I Creating Charge by Friction: Here you will rub different rods made of different materials with various fabrics to transfer charge and then use the proof plane and electrometer to determine the net charge on the rod. Put your results in the data table. 1. Attach the wire bucket to the electrometer as shown by your instructor. 2. Ground yourself and the electrometer. 3. Zero the electrometer. Set the Voltage to 100 V. Be careful not to peg the needle on the electrometer! 4. Grab one of the rods (glass, nylon,…) and rub it with one of the materials (silk, fur, satin, cotton, ….). 5. Dip the rod into the wire bucket (make sure not to let the rod touch it) and note the sign of the charge you have created on the rod. Record your findings in Table 1 of your data sheet. 6. Repeat the above procedure with different rod-material combinations to complete Table 1. Part II Charging by Polarization. Using two metal spheres and charged rods, you will move charge by polarization and determine the charge on the sides of the spheres using the proof plane and the electroscope. Sketch and explain each step as shown above. 1. Ground yourself and the electrometer. Set the Voltage on the electrometer to 3V (most sensitive). 2. Be careful not to peg the needle on the electrometer! Don’t bring the rod close to the bucket! 3. Ground both spheres temporarily to remove all charges from both spheres. 4. Choose a rod-material combination that can produces negative charge on the rod (see your Table 1). 5. Charge one sphere to its maximum capacity (rub the rod and touch the sphere with it several times). 6. Confirm the fact that you have negative charge on sphere using the proof plane and electrometer. 7. Ground yourself and the second sphere far away from first sphere. 8. Bring the second sphere next to the first sphere without touching it, leaving just enough space between to fit the proof plane in between the spheres. 9. Using the proof plane, remove some charge from the side of the second sphere facing the fist sphere and identify the polarity of that charge. 10. Zero the electrometer and discharge the proof plane. Repeat this step and identify the charge on side B (side farthest away from sphere 1). Record your findings. 11. Create sketches with brief explanations for each step as done above. 12. Repeat for a positively charged rod. Part III Charge by Induction. You will charge a metal sphere by induction using a ground (your finger) and determine the charge on the sphere using the proof plane and the electroscope. Sketch and explain each step as shown above. 1. Ground your self, the electrometer and the spheres to remove any charges. 2. Choose a rod-material combination that produces a negative charge on the rod. 3. Carry out the procedure as shown in the sample above. Verify the charge of the sphere with the proof plane and electrometer and write a brief statement to this effect. You do NOT have to sketch this because it is already done for you above. 4. Ground your self, the electrometer and the spheres to remove any charges. 5. Choose a rod-material combination that produces a positive charge on the rod and repeat the charging by induction, but this time for a positively charged rod. 6. Create sketches for the positive rod with brief explanations for each step as done above. Part IV Charging an Electroscope. You will charge an electroscope using both contact and induction and determine the charge on the electroscope using the proof plane and the electroscope. Sketch and explain each step as shown above. 1. Ground your self, the electrometer and the electroscope to remove any charges. 2. Charge the electroscope by contact with a positive rod as shown in the image above. Verify the charge with the proof plane and electrometer. Write a brief sentence as to whether you did in fact verify this procedure. You do NOT have to sketch this because it is already done for you above. 3. Repeat for a negatively charged rod and verify the charges. Sketch and explain each step. What is the charge on top ball and on the gold leafs? 4. Charge the electroscope using induction with a ground using a negatively charged rod and create sketches with brief explanations for each step. What is the charge on top ball and on the gold leafs? Charging Summary Fill in the blanks for these questions on your data sheet. When charging a metal sphere with contact using a positive rod, the final charge is ________________. When charging a metal sphere with contact using a negative rod, the final charge is _______________. When charging a metal sphere with induction using a positive rod, the final charge is ______________. When charging a metal sphere with induction using a negative rod, the final charge is ______________. Charging by contact gives the same or opposite charge as the rod? _______________ Charging by induction gives the same or opposite charge as the rod? _______________ More Fun Determine the charge on the Van de Graff Generator. Explain how you did it. Part V. Electric Field Hockey. Go to : http://webphysics.davidson.edu/Course_Material/Py230L/estatics/electrostatics.htm The objective is to shoot the positively charged puck into the goal by placing charges that produce electric forces and fields. Conceptually apply the inverse square law and the rule that opposite charges attract and like repel to reason where the charges should be placed. You can change the sign and magnitude of the charges. EXTRA CHARGES Start with “PRACTICE” and then do the games. Print out successful games of game 1 ,2 & 3. Use PRINT SCREEN to capture your successes and paste them into a word document. Shrink them so they fit on one page. Include this in your lab report. Have Fun! .
Load more

Recommended publications
  • Electrostatics of Two Suspended Spheres (Eletrost´Atica De Duas Esferas Suspensas)
    Revista Brasileira de Ensino de F´ısica, v. 34, n. 3, 3308 (2012) www.sbfisica.org.br Electrostatics of two suspended spheres (Eletrost´atica de duas esferas suspensas) Fernando Fuzinatto Dall'Agnol1, Victor P. Mammana and Daniel den Engelsen Centro de Tecnologia da Informa¸c~aoRenato Archer, Campinas, SP, Brasil Recebido em 25/2/2011; Aceito em 6/2/2012; Publicado em 21/11/2012 Although the working principle of a traditional electroscope with thin metal deflection foils is simple, one needs numerical methods to calculate its foil's deflection. If the electroscope is made of hanging spheres instead of foils, then it is possible to obtain an analytical solution. Since the separation of the charged spheres is of the order of their radius the spheres cannot be described as point charges. We apply the method of image charges to find the electrostatic force between the spheres and then we relate the voltage applied to their separation. We also discuss the similarity with the sphere-plane electrostatic problem. This approach can be used as an analytical solution for practical problems in the field of electrodynamics and its complexity is compatible with undergraduate courses. Keywords: electroscope, electrometer, method of image, image charge, electrostatic, sphere-sphere. Apesar da simplicidade do princ´ıpiode funcionamento do eletrosc´opiotradicional feito de folhas met´alicas finas, ´enecess´ariom´etodos num´ericospara calcular a deflex˜aodas folhas. Se o eletrosc´opiofor feito de esferas penduradas ao inv´esde folhas, ent~ao´eposs´ıvel obter uma solu¸c~aoanal´ıtica. Como a deflex˜aodas esferas car- regadas ´eda ordem dos seus raios, as esferas n~aopodem ser descritas como cargas pontuais.
    [Show full text]
  • Lab 1 Electrostatics
    Electrostatics Goal: To make observations of electrostatic phenomena and interpret the phenomena in terms of the behavior of electric charges. Lab Preparation Most of what you will see in this lab can be explained simply by the following: Like charges repel and unlike charges attract. These repelling and attracting forces that occur can be found using Coulomb’s law, which is stated as !! !! � = � !! where F is the electrostatic force, k is the Coulomb constant (8.99 x 109 Nm2/C2), q1 and q2 are the charges the objects carry, and r is how far apart the objects are. A neutral atom of a substance contains equal amounts of positive and negative charge. The positive charge resides in the nucleus, where each proton carries a charge of +1.602 x 10-19 C. The negative charge is provided by an equal number of electrons associated with and surrounding the nucleus, each carrying a charge of -1.602 x 10-19 C. Macroscopically sized samples of everyday materials usually contain very nearly equal numbers of positive and negative charges. When some dissimilar materials are rubbed together, some charges are transferred from one material to the other leaving each object with a small net charge. For example, when a glass rod is rubbed with silk, the rod usually ends up with a positive charge and the silk ends up with a negative charge. Materials can be cast into two electrical categories: insulators and conductors. The atomic or molecular structure of the material determines whether some charges are free to move (a conductor, such as metallic materials) or largely fixed in place (an insulator).
    [Show full text]
  • Electric Charges Observations Observations
    Welcome to PY106 Setting the Channel Number for Your Clicker -The syllabus is your guide to this course. It contains information about the discussions, labs., the class, lab. and 1. Press and release the “CH” button. exam. schedules and grading scheme, etc. 2. While the light is flashing red and green, enter the two digit - Discussion sessions begin today! channel code “41” for this class. - Labs. begin on Jan. 28. 3. After the second digit is entered, press and release the - Assignment 1 is a hand-in, and will be posted on Blackboard “CH” button. The light should flash green to confirm. soon. It is due on Tuesday (Jan. 28) 10:00pm. 4. Press and release the “1/A” button. The light should flash - Most other assignments are posted on WebAssign. To amber ONCE to confirm. If it flashes continuously, there is access the assignment, you need to acquire an access code probably an error and you should try it again. from WebAssign. Instructions for WebAssign can be found in the syllabus. - Lecture notes can be downloaded from http://physics.bu.edu/~okctsui/PY106.html. Note that the URL is case sensitive. 1 2 Electric charges There are two kinds of electric charge, positive and negative. Objects are generally charged by either acquiring extra electrons (a net negative charge), or giving up electrons (a net positive charge). Electric Charge Forces between charged objects can be very large. Such forces are really what stop us from falling through the floor. In other words, what we called the normal force is really associated with repulsive forces between electrons.
    [Show full text]
  • Ph 122 Stars%/Usr1/Manuals/Ph122/Elstat
    Electrostatics In this set of experiments, we separate electric charges by friction and explore the two different kinds of electric charge and how they interact. I. Theory Electric Charge We find two kinds of electric charge in nature • Positive (protons in the atomic nucleus all have positive electric charge) • Negative (electrons all have negative electric charge of the same size as protons) Atoms normally have equal numbers of protons and electrons and are thus electrically neutral, or uncharged. Likewise, larger objects usually have equal numbers of negative charges (electrons) and positive charges (protons) and are neutral. If there is a slight imbalance between the number of protons and the number of electrons, then the object is electrically charged. Electrons (usually the “outer” electrons) can be removed from an atom. For example, rubbing two different materials, say rubber and cloth, against each other can cause some electrons to move from one material to the other. Electrons are held more firmly in rubber (or plastic) than in cloth. Thus when a rubber rod is rubbed with cloth, the rubber rod does not want to give up its electrons to the cloth, so electrons transfer from cloth to the rubber, making the rubber rod negatively charged (more electrons than protons). The cloth now has a deficiency of electrons, so it is left positively charged (due to more protons than electrons). A glass rod, on the other hand, loses electrons easily compared to the cloth and is willing to give up its electrons to the cloth. If you rub the glass rod with the cloth, the glass becomes positively charged and the cloth gains electrons and becomes negatively charged.
    [Show full text]
  • Individual Monitoring Individual Monitoring Practical Radiation Technical Manual
    PRACTICAL RADIATION TECHNICAL MANUAL INDIVIDUAL MONITORING INDIVIDUAL MONITORING PRACTICAL RADIATION TECHNICAL MANUAL INDIVIDIAL MONITORING INTERNATIONAL ATOMIC ENERGY AGENCY VIENNA, 2004 INDIVIDUAL MONITORING IAEA, VIENNA, 2004 IAEA-PRTM-2 (Rev. 1) © IAEA, 2004 Permission to reproduce or translate the information in this publication may be obtained by writing to the International Atomic Energy Agency, Wagramer Strasse 5, P.O. Box 100, A-1400 Vienna, Austria. Printed by the IAEA in Vienna April 2004 FOREWORD Occupational exposure to ionizing radiation can occur in a range of industries, such as mining and milling; medical institutions; educational and research establishments; and nuclear fuel facilities. Adequate radiation protection of workers is essential for the safe and acceptable use of radiation, radioactive materials and nuclear energy. Guidance on meeting the requirements for occupational protection in accordance with the Basic Safety Standards for Protection against Ionizing Radiation and for the Safety of Radiation Sources (IAEA Safety Series No. 115) is provided in three interrelated Safety Guides (IAEA Safety Standards Series Nos. RS-G-1.1, 1.2 and 1.3) covering the general aspects of occupational radiation protection as well as the assessment of occupational exposure. These Safety Guides are in turn supplemented by Safety Reports providing practical information and technical details for a wide range of purposes, from methods for assessing intakes of radionuclides to optimization of radiation protection in the control of occupational exposure. Occupationally exposed workers need to have a basic awareness and understanding of the risks posed by exposure to radiation and the measures for managing these risks. To address this need, two series of publications, the Practical Radiation Safety Manuals (PRSMs) and the Practical Radiation Technical Manuals (PRTMs) were initiated in the 1990s.
    [Show full text]
  • Electric Charge
    Electric Charge Positive and negative electric charge, electroscope, phenomenon of electrical induction January 2014 Print Your Name Instructions Before the lab, read all sections of the ______________________________________ Introduction, and answer the Pre-Lab questions on the last page of this Print Your Partners' Names handout. Hand in your answers as you enter the general physics lab. ______________________________________ ______________________________________ You will return this handout to the instructor at the end of the lab period. Table of Contents 0. Introduction 1 1. Activity #1: Instructor demonstration of how to charge a rod 6 2. Activity #2: Instructor demonstration of charging by conduction using a proof plane 6 3. Activity #3: Observe the effect of induction on a neutral body 7 4. Activity #4: Observe the effect of induction on a charged body, Part I 7 5. Activity #5: Observe the effect of induction on a charged body, Part II 8 6. Activity #6: Determining the sign of an unknown charge 9 7. Activity #7: Observe permanent charging of a body by induction 10 8. Activity #8: Observe how a charged body acts on charged objects 11 9. Activity #9: Observe the motion of a charged body in an electric field 12 10. Activity #10: Observe the effect of induction on a divisible conductor 12 11. Activity #11: A paradox? 13 12. When you are done ... 14 0. Introduction We deal with electricity constantly in every aspect of life. Electric forces are holding our material world together by binding electrons and nuclei into atoms, and atoms into molecules. Of all the fundamental forces in nature, the interactions between electric charges are the best understood theoretically.
    [Show full text]
  • Experiment 13: Electrostatics
    Experiment 13: Electrostatics Figure 13.1 EQUIPMENT Front Table Ebonite Rod (Hard Rubber) Hair Dryer Glass Rod (or Lucite Rod) Rubbing Alcohol Rabbit Fur Paper Towels Plastic Film Silk Electroscope 65 66 Experiment 13: Electrostatics Advance Reading • Insulators brought near other charged objects ex- perience polarization, a shifting of electrons to Text: Law of conservation of electric charge, electro- one side of an atom. (Fig. 13.2) static charge, electron, proton, neutron, atomic model, free electrons, ions, polarization, conductor, insulator, conduction, induction. In this experiment, a glass rod or an ebonite rod (insu- lators) will be electrically charged by rubbing against Objective another insulating material. Whether the rod gains or loses electrons will depend on the combination of The objective of this lab is to qualitatively study con- materials used (refer to the electrostatic series pro- ducting and insulating materials, electric charges, and vided in Table 13.1 on Page 67). The charged rod will charge transfer. be used to charge an electroscope (a conductor that indicates whether it is charged) by means of conduc- Theory tion and by means of induction. There are two kinds of charges in nature: positive To charge by conduction: Bring a charged rod close charge carried by protons and negative charge carried to, then touch, the electroscope. As the rod nears the by electrons. An object that has an excess of either is electroscope, the free electrons in the electroscope are said to be charged. Like charges repel each other, and either attracted to or repelled by the charged rod (in- unlike charges attract.
    [Show full text]
  • Chem 481 Lecture Material 3/13/09
    Chem 481 Lecture Material 3/13/09 Radiation Detection and Measurement When radiation interacts with matter electronic excitation and ionization occur. When de-excitation results in the emission of photons these can be detected by suitable light- sensitive devices. When charge carriers (ion pairs, electron/hole pairs) are produced these can be collected to generate an electrical signal. The dead time of a detector is the length of time between the formation of an output signal (pulse) and when the detector conditions are able to produce another output signal (see figure below). Initially this second output is insufficient in size to be recognized by the counting electronics (less than the discriminator level). The resolving time is the interval between the initial pulse and the formation of a detectable pulse (see figure below). The recovery time is the interval between two full-size pulses. Events that occur during the resolving time will not be recorded and are known as coincidence losses. Gas Ionization Detectors Imagine a gas-filled container with 2 electrodes of opposite charge (see figure below). As radiation enters the gas filling and ionizes the gas (creates primary cation-electron pairs), the cations will drift toward the negatively-charged electrode and the electrons Radiation Detection and Measurement 3/13/09 page 2 will be collected at the positive anode resulting in a current that can be measured. Some cations and electrons may recombine. As the electric potential across the electrodes is increased a voltage is reached where the electrode attraction is greater than the attraction between cations and electrons and all primary ion pairs are collected.
    [Show full text]
  • Lab: Making an Electroscope CHAPTER 32: ELECTROSTATICS
    Name ________________________________________ Date ______________ Period ______ Lab: Making an Electroscope CHAPTER 32: ELECTROSTATICS Introduction : An ELECTROSCOPE is an instrument for detecting differences of electric potential and hence electrification. The earliest form of scientific electroscope was the versorium or electrical needle of William Gilbert (1544-1603). It consisted simply of a light metallic needle balanced on a pivot like a compass needle. Gilbert employed it to prove that numerous other bodies besides amber are susceptible of being electrified by friction. In this case the visible indication consisted in the attraction exerted between the electrified body and the light pivoted needle which was acted upon. The next improvement was the invention of simple forms of repulsion electroscope. Two similarly electrified bodies repel each other. Abraham Bennet invented the modern form of gold-leaf electroscope. Inside a glass shade he fixed to an insulated wire a pair of strips of gold-leaf. The wire terminated in a plate or knob outside the vessel. When an electrified body was held near or in contact with the knob, repulsion of the gold leaves ensued. In this lab you will be constructing and experimenting with your own electroscope using some simple materials. Materials: 1. Glass Jar with large mouth (biological specimen jar w/ non-metalic lid) 2. 15 cm rigid copper wire (10 gauge sheathed) 3. wire strippers 4. 3 cm of thin copper wire (solid) 5. aluminum foil (heavy duty) 6. straight pin 7. hot glue gun 8. Glass and acrylic rod 9. wool or flannel cloth 10. Silk cloth Proceedure : PART 1: MAKING ELECTROSCOPE 1.
    [Show full text]
  • How Electricity Was Discovered and How It Is Related to Cardiology
    Arch Cardiol Mex. 2012;82(3):252---259 www.elsevier.com.mx HISTORY OF CARDIOLOGY How electricity was discovered and how it is related to cardiology Alfredo de Micheli-Serra ∗, Pedro Iturralde-Torres, Raúl Izaguirre-Ávila National Institute of Cardiology Ignacio Chávez, Mexico City, Mexico Received 30 May 2012; accepted 10 June 2012 KEYWORDS Abstract We relate the fundamental stages of the long road leading to the discovery of elec- Magnetism; tricity and its uses in cardiology. The first observations on the electromagnetic phenomena Common electricity; were registered in ancient texts; many Greek and Roman writers referred to them, although Animal electricity; they provided no explanations. The first extant treatise dates back to the XIII century and was Electrometers; written by Pierre de Maricourt during the siege of Lucera, Italy, by the army of Charles of Anjou, Electrophysiology; French king of Naples. There were no significant advances in the field of magnetism between Electrocardiography; the appearance of this treatise and the publication of the study De magnete magneticisque Mexico corporibus (1600) by the English physician William Gilbert. Scientists became increasingly inter- ested in electromagnetic phenomena occurring in certain fish, i.e., the so-called electric ray that lived in the South American seas and the Torpedo fish that roamed the Mediterranean Sea. This interest increased in the 18th century, when condenser devices such as the Leyden jar were explored. It was subsequently demonstrated that the discharges produced by ‘‘electric fish’’ were of the same nature as those produced in this device. The famous ‘‘controversy’’ relating to animal electricity or electricity inherent to an animal’s body also arose in the second half of the 18th century.
    [Show full text]
  • Positive Negative Electroscope
    ©2010 - v 4/15 ______________________________________________________________________________________________________________________________________________________________________ 615-3005 (10-095) Positive Negative Electroscope Introduction: All atoms are naturally charged. This is because protons and electrons naturally carry a positive or negative charge. A stable atom usually has an equal number of protons and electrons, giving it a neutral charge. However, it is possible to transfer electrons from one atom to another. This occurs every day in nature, and is called static electricity. The effects of the atmosphere sliding over itself is sufficient to produce vast amounts of static electricity; lightning bolts are simply discharges of this energy. Electroscopes are devices that respond to changes in static electricity. You will need to supply a 9V battery which is not included. Electroscopes are a staple of scientific classrooms. Though static electricity is invisible most of the time, an electroscope can visually demonstrate a charge. Consider a standard leaf electroscope: as a charged object is brought near, the leaves move apart. This is a much better way of demonstrating static electricity than a simple discharge would be. Our new positive negative electroscope takes the concept one step further. Instead of using silver foil or pith balls, this variant uses Light Emitting Diodes, or LED’s. A transistor present inside the device responds to changes ion voltage. Most electroscopes are sensitive to a few hundred or thousand volts; due to the nature of the design, our LED electroscope will respond to only a few tens of volts. Simply rubbing a pen on your shirt several times is enough to affect the LED. Description: Enclosed in a sturdy blue case, our LED electroscope is extremely accurate and exceptionally durable.
    [Show full text]
  • PRINCETON UNIVERSITY PHYSICS 104 LAB Physics Department Week #1
    1 PRINCETON UNIVERSITY PHYSICS 104 LAB Physics Department Week #1 EXPERIMENT I BUILD, AND USE AN ELECTROSCOPE TO EXPLORE PHENOMENA OF ELECTROSTATICS This week you will build an electroscope (instructions on page 5), calibrate it, and do a few suggested experiments. Next week you will continue doing experiments with your electroscope, some of your own design, and the last hour of the week-2 lab will be devoted to short seminar talks. Your electroscope is basically an isolated conductor (i.e., the copper electrode, which is insulated from ground) with an aluminized-Mylar leaf attached to indicate the presence of excess charge, of Aluminum tube either sign. Like charges repel, pushing Rubber stopper the leaf away from the electrode. (See Copper the figure.) The electroscope is simple, electrode Teflon insulator sensitive, and semi-quantitative. Before using your electroscope (and Aluminized Mylar possibly at other times as well), you leaf should “discharge” it by temporarily “grounding” both the copper electrode, as well as the aluminum (Al) tube that forms the body of the electroscope. You can discharge the electroscope by making a temporary electrical connection between the copper electrode, the Al tube and the grounded Al sheet on the lab bench, Excess charge which is connected in turn to the building ground, which is a large conductor that has been driven far enough into to ground Ground symbol to be in electrical contact with the entire planet Earth. When the electroscope is Crumpled aluminum foil discharged (and the copper electrode is vertical) the aluminized Mylar leaf hangs Grounded aluminum sheet on bench vertically in touch with the copper electrode.
    [Show full text]