DATA-SHEET CONTENTS MVDS
TROPHY The advantagesofMVDS-TROPHY INTRODUCTION......
CONTENTS TROPHY
SUBS_SEND_V
AMD-53-S2DVB-S2 MODULA
DVB_BILLING_V
BILLING SER
MVDSHEAD-END......
SSH access...... SETTINGS FOR CONNECTION SETUP CONFIGURA INPUTS...... MUL GENERAL SAFETY PROGRAMS...... INST INST MAIN FUNCTIONSOF GENERAL SPECIFICA SI GENERA XML EIT MODULA NIT Modulators (streams)andgroups...... Conditional accesssystem(CAS)builtintothemodulator/multiplexer GENERAL Enabling thescramblingmode...... TROPHY Mask andtypesofscrambling...... Decoder numberandgeographiczone...... W MAIN INFORMA DVB-BILLING SoftwareandStatisticsBilling...... Billing programoptions...... The MainMenuReview Main parametersofDVB-BILLINGSubscribers TERRESTRIAL orking withthesubs_sendprogram...... (EPG)Server GENERA TV FileFormat...... TIPLEXER/REMUL ALLING FUNCTIONAL ALLING VER...... INSTRUCTIONS...... -ACCESS CAS...... 2 subscriptionmanagementsoftware...... T .5 subscriberaccountingsoftware...... DESCRIPTIONOFFUNCTIONS...... INFORMA INFORMA OR P TIONS...... T TIONS VIA OR...... AND OPERA T OR...... DVB-S2BROADCASTING ARAMETERS...... TION...... THE ETHERNET ...... TION...... TION...... DVB-S2terrestrialbroadcasting...... T ...... AMD-53-S2 MODULA TIPLEXER/PID FIL
OR /120-CHANNEL THE ETHERNET TING INSTRUCTIONS...... ELEMENTS NETWORKINTERF AND F INTERF TER...... MUL T OR /MUL Accounting Program.... ACT TIPLEXER...... ACE...... OR ACE...... Y TIPLEXER... SETTINGS. .. 40 39 36 35 34 34 33 32 31 31 29 29 28 27 27 26 24 23 22 21 20 18 17 15 13 13 1 1 10 9 9 9 9 7 7 6 5 2 1 1 1 CONTENTS MVDS
TROPHY
AMD seriesL-band8-channelsCOMBINER/DC&10MHzreference...... AMD seriesDC&10MHzreferenceINJECT
Optical transmitter(OPT
SDI-410C STI-410CCommonInterfaceS/S2/T/T2/CtoIP
SPECIFICA GENERAL SAFETY SAFETY SPECIFICA GENERAL SAFETY INST GENERAL Product description...... INST GENERAL USER INSTRUCTIONS...... Dimensioning aFibreOpticsystem...... TECHNICAL Initial programscreen...... FRONT PRODUCT GENERAL Installation instructions...... Device informationtable...... INITIAL Input settings...... RF inputtable...... Input statustable...... List ofservicestable...... Detailed serviceinformation...... Output settings...... Streaming settingstable...... Output streamstable...... SAP/SDP Advanced outputsettings...... IP CAM settings...... SNMP System menu...... Event logs...... Export parameters...... Import parameters...... Firmware upgrade...... User management...... Restore defaults...... Reset thedevice...... Language...... Specifications...... TERRESTRIAL settings...... ALLING ALLING settings...... CONFIGURA P INSTRUCTIONS...... W INSTRUCTIONS...... ANEL...... settingstable...... DESCRIPTIONOFFUNCTIONS...... DESCRIPTIONOFFUNCTIONS...... INFORMA INFORMA CONFIGURA DESCRIPTION...... ARNING...... TIONS...... TIONS...... SPECIFICA AND OPERA AND OPERA DVB-S2BROADCASTING -TX DT)andopticalreceiver(OPT TION...... TION...... TION...... TION...... TIONS...... TING INSTRUCTIONS...... TING INSTRUCTIONS...... OR...... STREAMERS...... -RX DT)...... 72 71 71 71 71 70 70 69 69 69 68 68 67 66 66 65 64 64 64 63 63 62 62 61 61 61 60 59 59 58 57 55 52 52 49 48 47 46 45 45 45 45 44 43 42 42 42 42 41 CONTENTS MVDS
TDX-480
REMOTE
A
OMNIDIRECTIONAL 4W KU-BANDBLOCK-UP-CONVER 2W KU-BANDBLOCK-UP-CONVER
SA TD-54 DVB-S/S2toDVB-S2 T TROPHY Dishes.Pentaseries...... 12VDC SPECIFICA MANAGEMENT SSH RS-485 COMMUNICA Product description...... MANAGEMENT GENERAL SAFETY Specifications...... SPECIFICA INST FUNCTIONAL Front Panel...... DA Initial configuration...... OPERA THE MAIN NETWORK MANAGEMENT SAFETY General configuration...... MAIN FUNCTIONSOF GENERAL Initial W Device informationtable...... Output bitratestable...... Input statustable...... RF inputs...... T NIT RF outputs...... IP E-mail-settings...... SNMP System menu...... Event logs...... Export parameters...... Import parameters...... Firmware upgrade...... ransport Streams...... settings...... TDQ-480 8DVB-S/S2toDVB-T/Ctransmodulators...... T ...... ACCESS CONTROLLER...... A ALLING ACCESS...... BETWEENCONTROLLER settings......
TERRESTRIAL TING...... eb interfacescreen...... SUPPL INSTRUCTIONS...... INSTRUCTIONS...... DESCRIPTIONOFFUNCTIONS...... INFORMA APPLICA TIONS...... TIONS...... AND OPERA SLOT ELEMENTS...... YING VIA BY USB-INTERF TION OFDVB-S2to
WEB-INTERF ANTENNA...... TION...... VIA TION LINE...... DVB-S2BROADCASTING T A ransmodulator TD-54-S/S2 toDVB-S2
REMOTE TING INSTRUCTIONS...... VIA TER (BUC)...... TER (BUC)...... REMOTE ACE...... AND ACE...... ACCESS ...... THE TRANSMODULA ACCESS CONTROLLER CONTROLLER TRANSMODULA TRANSMODULA T ...... ORS...... T OR...... T ORS...... 1 1 1 1 1 1 1 1 1 1 109 108 107 106 106 105 104 104 104 103 103 102 101 99 98 97 94 93 92 92 91 91 90 89 83 82 82 82 81 80 78 78 77 76 74 73 13 12 12 12 12 12 1 10 10 10 1 INTRODUCTION MVDS transmodulator D b apartment source ofthesignalforasingle built 2. module). T with embedded decoder sized 0.4 ...0. C industry D c s 3.7...30GHz T HD terrestrial two solution. Inparticular cost-ef high-tech, basedonknow-how TROPHY INTRODUCTION TROPHY of digital customers takefulladvantage 1. e o u ustomers V R V r V i r Digital l v
p B
d Wireless O and main i o on B i COMMON c - i n P S businesses r e n g fective business TROPHY a - s 2 H .
Ultra s cluster 6 t
S TV.
e
services: (or MVDSSystemisa
mantenna wired Y a MVDS
a broadcast
S i building n 2 - installs s r TROPHY c
A e e
y any HD D
l range
t i C
a e - igital s t technology T cable i n n p C . n
INTERF o DVB-S2 o TERRESTRIAL
t System d a DVB-S2 and s E : p i
i r , v . n - or S
t TV ing i B , ithelps D e d -ACCESS
with LNB Users S television m x o u the group o V p x
a e - ACE of e f
l d digital
C
B of direct
n . hotel
i w STB s u The a SD fers t A - i h m i n v t of M of C + e h d e ; - , ,
DVB-S2BROADCASTING determined T and presence the T DVB-S2 • television 100% • A errestrial he dvantages 100% unique full receiving exact guaranteed transponder coverage to headend service of microwave DVB-C in
location the of antenna the TROPHY line at special of delivery package. transmodulation equipment a of competitive of the broadcasting of sight subscriber
the P MVDS territory roject between to MVDS all and solution: D price. ocumentation. customers of . implies unique with transmitting city repeater
descrambling without the equipment high-quality s
obligatory must antenna cabling. 1
be of of
THE ADVANTAGES OF MVDS MVDS serves Therefore, ef than Of than or Thus, The advantagesofMVDS-TROPHY 1. Extremelylowtransmitterpower(2-4W)tocoveraradiusup30km. dB received achieve ratio standard, Secondly 300 may That dB For dB the The Due ficiency 20000 course, or or or gain example, times! fact to the be the Azimuth =0 is, above 5 16 3981 the TROPHY what a times, less the transmitter is times territory of losses a signal , times! theoretical of you for that, the Elevation /Degreevs. dBi signal-to-noise times MVDS a transmitter MVDS is than 4dB. subscriber compared the the
achieved need in TERRESTRIAL losses for in in That power with in the receiver T2 the the T Block example, broadcasting signal power o to energy transmitter UHF is, a work in DVB-S2 UHF maintain . power radius such the 0.6m the to Up power in antenna to DVB-T2. ratio range. in transmitter ef atmosphere DVB-S2BROADCASTING the in Converter energy work in up ficiency of DVB-T2, the standard a . the fset UHF power Azimuth =180 above to at threshold range correctly Practical 30 least gain range antenna ef band km. of ficiency? in power with 1 1000 DVB-S2 is, it can of in 1dB. the of DVB-S2terrestrialbroadcasting: is 20 10.7-12.5 the on signal-to-noise in 10.7-12.5GHz broadcasting a UHF be is necessary thousand times. in the average, That group range equal lower the broadcasting range DVB-S2 is, range GHz, power to of by the times! 12 36 10.7-12.5 by to 7 showed, of Azimuth /Degreevs.dBi of 10.7-12.5GHz and OmnidirectionalSlot 2 is 2W W higher
t GHz r (0.025W however a n s m by are i t t i 36 n much g , may
on + the C 7 o carrier!) Antenna n = be energy v higher 43 e r less t 2 e dB r
THE ADVANTAGES OF MVDS 3. Extremelysimpleandinexpensivewaytoretransmittingasignal. down-converters 2. the The equipment. 64QAM For low modulations. In broadcasting. c e a a territory MVDS unlimited. r r carrier are transmitting A 2. e e o g f T p fi In t signal a m MVDS,
r D c e 3.7-4.2 linear used example, The i a most n other p i a e - n , TROPHY t a 5
n e s recovery r t with 4 r m c e use h signal to s to mixer y significant
d e , ranges, i Using
s GHz we t And r retransmit
r e o converter w s the a w of T a in
i f e
o o television
i TERRESTRIAL i n use t
s requirements. this, n M standard MMDS are . and h receive s
c “shadow” and s
The the V a 1 m non-standard
s n 0 D two a t in 10.7-12.75 reduction o used,
0 a prices r S the p d 0 network e n turn, and number
r broadcasting,
u d a o types b carriers signal t t a Input l i v signal LNB’ r h signal, m a r i o slot which e d leads zones. become d t DVB-S2BROADCASTING e a e o o
s d
r in D s r
of and c e antenna a of of GHz s with e V converters a and t the
it to , n i signal s B h c
implies such such e is t give And u a higher A 2 - TD
L-band output i r comparable -54 S/S2toS2T L-band Input error cost Loop input full T n bands. g l g suf Fault standard W l amplitude 2 g e y y ransmodulator Lock DC RS-485 ficient + USB modulation: of A L-band output TD -54 S/S2toS2T L-band Input error Loop prices input the Fault have creating Here ransmodulator Lock DC RS-485 + USB to satellite use A L-band output TD -54 S/S2toS2T L-band Input error Loop input modulation with Fault for to use can ransmodulator Lock
DC RS-485 be + down-converters.
USB of a A MMDS TD
L-band output inexpensive -54 S/S2toS2T L-band be Input error QPSK Loop input subscriber used, Fault ultra-linear receiving ransmodulator Lock used DC RS-485 Output recoveredcarriers+10MHzL.O. + USB A L-band output TD -54 S/S2toS2T L-band Input error Loop input methods Fault converters. which and ransmodulator household Lock DC RS-485 + USB A L-band output TD -54 S/S2toS2T L-band network Input error Loop input 0.4m-0.6m down-converters Fault 8PSK, increases modes ransmodulator Lock DC RS-485 + USB of A L-band output TD -54 S/S2toS2T L-band Input error Loop input the Fault LNB ransmodulator that is Lock DC RS-485 + USB in 16QAM 10MHz ref.+24VDC 5 7 1 3 achieved L-band output L-band inputs the antennas 2 8 6 4 worth receiving is
L-band 8-ch combiner cost
90-264VAC 50/60Hz phase with and $1- 3 of in . THE ADVANTAGES OF MVDS MVDS functionality This Access 5. Using asmallerbandreducesthenumberofchannelsaccordingly Mbit multi-pass such Practically 4. E :1 L XA CC :6.725~7.025GHz(LO=5.75GHz) CE :6.425~7.025GHz(LO=5.275GHz) CB :6.425~6.725GHz(LO=5.275GHz) CF :5.850~6.725GHz(LO=4.9GHz) CA CN :3.700~4.200GHz(LO=5.15GHz) List ofconverterswhichareproducingnow: :10.7~1
The Own :7.9~8.4GHz(LOFreq=6.95GHz) :5.850~6.425GHz(LO=4.9GHz) each) 1.70 ~12.50GHz(LOFreq=10.75GHz) factor a TROPHY band, presence System. DVB-S2 , + 1.5 GHz(LOFreq=9.75GHz) transcoding one allows and 300HD it
TERRESTRIAL is transmitting quality possible of modulators/multiplexers you a channels wide . to technology to frequency install broadcast DVB-S2BROADCASTING converter (2 Mbit an , it extremely spectrum, each) is provides up possible to + and 1700 40UltraHD KA O :17.30~17.70GHz(LOFreq.=16.35GHz) R: 14.50~14.80GHz(LOFreq=13.55GHz) A C :13.75~14.50GHz(LOFreq=12.80GHz) B :13.75~14.25GHz(LOFreq=12.80GHz) F :13.00~13.25GHz(LOFreq.=12.05GHz) G :12.75~13.25GHz(LOFreq.=1 D :12.25~12.75GHz(LOFreq.=1 :14.00~14.50GHz(LOFreq=13.05GHz) compared inexpensive a original :29.5~30.0GHz(LOFreq=28.55GHz) to Mbit signal form of channels TROPHY bandwidth a useful with packet Head-End the data. (25 -ACCESS UHF of . up 100SD For Mbit to range. with example, 800 each). channels Conditional the MHz. 1.3GHz) 1.80GHz) highest using With 4 (1 TROPHY MVDS HEAD-END MVDS equipment T boxes company The demands that run, streamers, Almost Heart Design TROPHY rough due are HEADEND of allow TROPHY of the all system Linux to Block UP MVDSHEAD-END of TROPHY of the is the the use fers our time. one computers. constant demultiplexers, major of its customers is to IP
is TERRESTRIAL of UHF S/S2 or low-cost modern customers. 2W
the the MVDS Converter streamers HEADEND lowest improvement part From electronic Head-end and to T/T2 of get The in transcoding high-ef a DVB-S2 modulators this L-band the 950-2150MHz out DVB-S2BROADCASTING IP complete Billing components market. fact “turnkey” FPGA is of ficient very the / MUX IP derives System, IP
servers, software Slot transmitting components simple system DVB-S2
broadcasting antenna are the IP the due the IP main
of we based Modulator Conditional MPEG IP commercial to multiplexers, allow and using advantage External IP
Streams business. on original all T of IP the / our ransport 120ch IP
Access broadcasting,
customers Linux connection the of software
Multiplexer the modulators
software. System HEADEND, Server Billing
to solutions
between DVB-S2 standard. 3.7...30GHz range. Any partof respond . which - and For all
namely this, the modules. the example, quickly the cost in TROPHY the set-top- the of to long 5 fact the the the
AMD-53-S2 MODULATOR/ MUX MVDS DVB-S2 MODULA AMD-53-S2 120-CHANNEL Part No.1001-1016 TROPHY
TERRESTRIAL MUL T OR / TIPLEXER DVB-S2BROADCASTING 200-240
Ethernet V AC L-band output 50/60Hz
6 AMD-53-S2 Modulator/Multiplexer AMD-53-S2 MODULATOR/ MUX responsible high-speed conversion TV Ÿ MPEG HeadEnd 1 Ethernet signals Ÿ The transport Ÿ transmitter QPSK/8PSK IP MUL Ÿ standard. over modulator/multiplexer M GENERAL Ÿ MVDS 2 U
Ÿ solution; Ÿ Ÿ Ÿ Ÿ Ÿ Ÿ class performance,providingahighSNRvalue, excellentshoulderlevelsandlowestphasenoise. perform highqualitymodulationbasedon AMD-53-S2 MODULA Ÿ Software built-in Ÿ MAIN FUNCTIONSOF Ÿ 0 A The DVB-S2
A L
The or
modulation internal TIPLEXER M high-performance T has highlyef provides transportStreamratesupto100Mbit/s; supports FullPIDremapping; supports allPIDsofinputservices provides ef supports ControlandSet-UpviaWEB-interface; has highperformanceandreliability takes provides covers t satellite I r D transport TROPHY P a device in ASI n - L
or streams full 5 s E AMD-53-S2 or INFORMA support full or p 3 into license X digital→analogue for the ASI o processing carrier - HD (optionaly) MVDS E S signal from r advantages up receives t in the R
2 L-band full fective compensationofnetworkjitter; streams. resolution.
converts (optionaly).
and TERRESTRIAL s ficient multiplexingalgorithmswithPCRcorrection; to are full t excellent i D L-Band to r s another e for
to V from 120 Block a enable TION multiplexed the B m a compliance designed range FPGA transmit DVB-S2 a
- allows T s TROPHY S independent OR/MUL data
transport b AMD-53-S2 MODULA of transponders range 2 available freely UP r f output a r IP
TROPHY the It o (950 n
does converter M m
Converter stream d can the sources IP
O them DVB-S2BROADCASTING (950...2150 MODULA for -ACCESS and adjustable ... n
t TIPLEXER integratestheCycloneVcoretechnology requiredto D technology signal. h output with e receive the e U 2150MHz). stream w applications
up -ACCESS L generated. via
in multiplexed , includingEIT T A analogue (DAC) s . included included (BUC). R DVB-S2 T satellite a to of Gigabit T O O t up e OR P TROPHY DVB MHZ) R l 120 into Conditional up- to l H i
t to is Y A e T provide scrambler / /
OR /MUL
MPEG and ; expertise.Itprovidescustomerswithabest in of a fers cost solution; Access transport TIPLEXER: bit ef fective, rate System from streams highly 2 Mbps for to reliable a up content single to and 100 carrier Mbps; protection. f l e x , i with 7 b l e
AMD-53-S2 MODULATOR/ MUX MVDS input output signal Browser results AMD-53-S2 streams.
1Gb Ethernet input ASI input signal, TROPHY gives MPEG Up to120 ensures TS input single control WEB 200-240 management,
Ethernet MODULA V an AC PIDs L-band output TS 50/60Hz MPEG
ef TERRESTRIAL AMD-53-S2 Modulator/Multiplexer ease ficient filtering&remaping 200-240 T 1Gb EthernetSwitch of T
Ethernet OR V AC ransport Streamsover IP L-band output Demux transmission 50/60Hz use selection
AMD-53-S2 Modulator/Multiplexer / and MUL DVB-S2BROADCASTING 200-240 enables
Ethernet TIPLEXER V AC of L-band output 50/60Hz modulation and in AMD-53-S2 Modulator/Multiplexer Mux QPSK full PCR 200-240
Ethernet V configuration AC L-band output provides 50/60Hz and correction. type, AMD-53-S2 Modulator/Multiplexer 8PSK 200-240 control Switch
Ethernet a V TS AC L-band output 50/60Hz high modes. WEB-interface of AMD-53-S2 Modulator/Multiplexer of the performance the 200-240 modulator
Ethernet V The AC mute/unmute L-band output 50/60Hz TROPHY scrambler ACCESS
Oscillator AMD-53-S2 Modulator/Multiplexer user-friendly Local also 200-240 and
Ethernet channel V - AC L-band output 50/60Hz of multiplexer fers conditions AMD-53-S2 Modulator/Multiplexer 10MHz ref.+24VDC 5 7 1 3 L-band output L-band inputs Embedded monitoring spectrum. 2 8 6 4 , for including DVB-S2 QPSK/8PSK 90-264VAC 50/60Hz L-band 8-ch combiner
modulator the of W This 8 RF eb all AMD-53-S2 MODULATOR/ MUX MVDS
IP IP+ASI inputs IF 70MHzoutput 950-2150MHz output EPG (EIT)supporting TROPHY 2nd and3rdbyteofa MPEG filter outtheinteresting packetsandschedulethemtotheirtarget DVB-S2 carrier of alltheservicestransmittedonaparticular transponders. PID filteringisenableincaseofIP-inputmode only new servicesand/orprogramcomponentscan beadded. available, oradditionaltransportvolumeisachievable byraisingthetransportstreamsbitrate, transport streams.Onconditionthatinthese transportstreamsanadequatetransmissionrateis A MUL PMT The outputsignalcontainsallthetablesnecessarytoprogramandassociatedservices (P connector output DVB-S2carrierwithmaximumbitrateof100MbpsandistransmittedviatheN-type Up to120inputelementarytransportstreamsaremultiplexedatdeviceandinsertedinto the Deliveries aremadewiththefollowingconfigurations/deviceversions: Using theintegrateduserinterface,operatingparameterscanbevariedwithinwide limits. or satellite via RF-outputandconfigurablebyIP digital program“bouquets“intheDVB-S2carriercanbeproduced. The deviceistransportstreammultiplexerandDVB-S2modulator GENERAL In particular The provisionsofDINEN50083mustbeobservedatalltimeswhenworkingwiththeequipment. connected. All assembly regulations areobserved. When componentsarebeinginstalledinareaswherereceptionisimportant,ensurethatEMC technician. The devicesarenottobeassembledandbroughtintousebyanybodywhoisanauthorised always followtheaccompanyinginstructionsexactly When assemblingandcommissioningthe SAFETY INST inputonly multiplexerhasbeenintegratedintothe , SDT TIPLEXER/REMUL ALLING TROPHY Features TS packetsareidentified bythePacketID,PID. -ACCESS CAS INSTRUCTIONS . , NIT DESCRIPTIONOFFUNCTIONS TV network.Dependingontheapplication,devicearepre-configuredbyhardware. , DINEN60728-1 , installationandcableconnectionmusttakeplacewhennoelectricityhasbeen
AND OPERA
and TERRESTRIAL +
+
TDT). TS packet. + + + 1001 100210031004100510061007100810091010101 TIPLEXER/PID FIL
Part No.1001,1003,1005...1015supportsEPG (EIT TING INSTRUCTIONS 1 regardingsafetymayonnoaccountbeignored. DVB-S2BROADCASTING
+ interface.
AMD-53-S2 deviceforprocessingtheincoming AMD-53-S2 MOD/MUXandexecutingthesettings, TER
The signalcanbebroadcastorfedintotheMVDS . . A PartNo. rawMPEG The taskontheremux/muxsideisto This isa13-bitnumber locatedinthe T . Withthemtheuser‘sown ransport Streamconsistsdata
The outputsignalareprovided 1 10121013101410151016 tables)too. . A T 9 , AMD-53-S2 MODULATOR/ MUX INST MVDS 200-240 L-band outputN-typeconnector Input stream+ Power (greenLEDsscale)SwitchedON,30secafterpowerrestart Explanation ofthefunctionalelements ALLING FUNCTIONAL Output attenuation(dB) -3.5 Spectrum inversionof Pilot toneof FEC FramelengthNormal Roll-of Modulation –FEC8PSK3/4 Symbol Rate(kSpS)14400 Output Frequency(MHZ)1000 Modulator section Auxiliary SIPort: TDT Original NetworkID: T Provider name: SI generatorsection Protocol/Port: Inputs section PSR Restamping: Billing Server: EPG support Scrambler: Input mode: System section SNMP IP IP User/password IP Factory settings: ransport StreamID: gateway: netmask: address: TROPHY generator: V AC 50/60HzSCZ-20connector f trap(IP): WEB interfaceEthernetRJ-45,10/100/1000,UDP
TERRESTRIAL
Enabled(PartNo.1001,1003,1005etcupto1015)
ELEMENTS 0,25 901 ON 4 2 no name UNICAST Enabled Enabled (PartNo.1001-1008) IP-MUX 0.0.0.0 0.0.0.0 255.255.255.0 admin / 10.10.10.20 DVB-S2BROADCASTING f f :
AND F UDP:1234
ACT OR Y SETTINGS 200-240
Ethernet V AC L-band output 50/60Hz 10
AMD-53-S2 Modulator/Multiplexer AMD-53-S2 MODULATOR/ MUX MVDS SNMP A IP-Gateway: The IP-Subnetmask: A IP-Address: IP One-time SETTINGS FOR Allocation
default default
address. It Password: trophy Login: root Connection type:SSH Port: 22 Host Name:10.10.10.20 your on In SSH The It Default Default is is mask order the recommended recommended
MODULA T TROPHY computer access. rap IP IP SSH at corresponding password: Username: of to
address address The IP-Addr: the [0.0.0.0 IP be [0.0.0.0 connection
address, able start default
T [0.0.0.0 . TERRESTRIAL THE ETHERNET Indicate OR/MUX for for ... to [0.0.0.0 an .. to to 255.255.255.255] 10.10.10.20 access admin admin the the IP change change IP default ... to
install address
follow address device case 255.255.255.0 the uses .. the 255.255.255.255] IP the the : the that options 10.10.10.20 the DVB-S2BROADCASTING
address. to Linux is via password password NETWORKINTERF ... PuTTY a “use Linux used. 255.255.255.255] possibly a configuration DHCP into DHCP“ ... Debian
program 255.255.255.255] PuTTY for for active
server confidential. confidential. is IP 8 set
address OS.
menu: on exploitation is to requested. ACE “OFF“, to a or possible of no If a gateway the DHCP probe used
server in SNMP fails, the 20 could network. will
trap use be manager reached. the default . 1 1 AMD-53-S2 MODULATOR/ MUX MVDS For # wwwpasswd-ddeleteuser # wwwpasswd-aadduser # wwwpasswd-hhelpmenu interface. # # R # EnternewUNIXpassword:*******[ENTER] # passwd wwwpasswd the forming Modulator/MUX TDT be T systems Network ime etype newUNIXpassword:*******[ENTE more indicated Internet. TROPHY
(UTC). provide details [ENTER] TDT over T ime in
Y (in
commands IP ou TERRESTRIAL reads a Protocol the . SI does NTP time must T GENERA ime LINUX
is not reference specify and (NTP) intended is have OS Date using T DVB-S2BROADCASTING OR the is manual. its a T to for URL menu, able own networking protocol for synchronize the
add, of (TDT) real-time see NTP stream. delete page and
Server all clock. on The No.13), participating and the that for Therefore, TDT change subscribers will clock then
synchronize contains computers you of synchronization if Users set-top-boxes. need you the turned the to and to current provide Coordinated current Passwords “ON” between
UTC a time, the connection function time. computer Universal which of WEB- 12 The will to of AMD-53-S2 MODULATOR/ MUX MVDS The ADD KEY REST BACKUP SW licenses. SERIAL to The IP There connection When CONNECTION PC set the device device Ethernet Network T following the up If CONFIGURA o it
the MODE on use is has to 255.255.255.0 user received multiplexer necessary modulator TROPHY ORE. its a are is the has to all computer No. interface own 10.10.10.20. interface . chapters. connection or . be two Y functions Y IP ou will
to Y IP- ou havetheopportunity tomakeanadditionalorderforthe adjusted is uniqueforeachdevice. ou key
TIONS VIA unique options can address be be ˃
SETUP function TERRESTRIAL can output MUX to must connected works made connected - save subnet. change any upload of IP to for to MODE. In be unchanged.
Internet for the all address to match is is order the
the THE ETHERNET entered not settings the almost If the the a device multiple menu, computer to to backup.json used relevant to the basic device the browser DVB-S2BROADCASTING PC to access self-explanatory after network. of avoid by depending when device(s). network devices configuration, the WEB-interface device pressing has System This numbermustbespecifiedwhenordering anadditional , the device capable address the file INTERF WEB been
using IP are to and All on
INPUT as change the requirements: connected the the interface JA conflicts. . the entered a Any an the ADD ACE V backup.json settings choice A appropriate activate
Ethernet MODE
particular script special the KEY of into device After to of the (Google
can button. the
the is Java features - cable. the device these selected. file. HTML PC/ SYSTEM be same INPUT configuration. address made Script Chrome laptop The settings,
from of user network
TROPHY MODE use The via in window default a interface field with your PC, is will Internet transport the each recommended). line be -ACCESS license. the of 10/100/1000 IP browser will IP : explained
the device
address PC must address Browser be stream has browser displayed. be settings. must to called of . of in is be How Mbit The fed the the the , 13 be in a AMD-53-S2 MODULATOR/ MUX MVDS that means tomaintainsynchronization inthiscase,theydonotspecify thejitterlimits,suggestingonly data additional PCRs application jitter Synchronization interval the transmitting Synchronization PCR rights modulator/multiplexer BILLING by The SCRAMLER TROPHY SERIAL stream The entering encoder it license multiplexer TROPHY that (IP is REST to are is "intended" of
view No. transport, -ACCESS fed SER is 100ms. buf also is the AMPING can transmitted PCRs is to function buf of contemplated. fering
VER TERRESTRIAL text unique the program be af fer function can of fected to through modulator included key for in license. and the address be be is the output. (PCR for received example), working +/-4 adversely receiver earlier packages) extracted by is multiplexer each a available in ms the - constant-delay can output Program In the DVB-S2BROADCASTING or maximum device. if from this multiplexing System factory TROPHY be and later af before should through fected case, , the when specified and Clock the than This manufacturer in T in the the be it ime by accuracy case -ACCESS the portion a 120-channel may number expected. Reference) of present well-designed transmission subscription receiver
IP- if Clock multiple of become a ˃ prior of MUX TROPHY must of in the license (STC) after buf order
the clock Although program system. multiplexer INPUT necessary fer be information stream. over confirming system. . . with -ACCESS added. specified Otherwise, recovery PCRs links
MODE
the Thus, the streams. . to having are MPEG transmitter the (list when re-stamp must PCRs scrambled
the inserted is license of selected.
a license included In standards be ordering variable are this studied the order STC inserted with signal can case, PCR decoders The an . delay depends a provide be if maximum additional values transport following is
installed such there or at time and 14 the the an on of is AMD-53-S2 MODULATOR/ MUX
preliminary processing.Inthismode,dataisreceivedfromonlyoneport,exceptforspecificcases. IP-INPUT between theportnumberandnetworkparametersofsourcemodulatorinput! port, theiconwitharotatingscaleisdisplayedin“Programs”column.Checkcorrespondence displayed inthe“Programs”column.Ineventthatthereisnocorrecttransportstreamonany the portnumberofsource. individualized! the ETHERNET In thefirststep,IP or unicast. program streamandcanbeoperatedaccordingtotheIP The 120possiblelogicalstreamchannelscanbedefinedasamulti-programorsingle INPUTS connected totheETHERNET number mustbeuniqueandcannotrepeated! MVDS
TROPHY mode
The SOURCEsettingscanbemadeseparatelyforeachstreamchannel. interfaceforusinginthelocalnetwork. (withoutDEMUX/MUXprocessing).
TERRESTRIAL
address,netmaskandgatewayaddressofstreamsourcesareassignedto The informationaboutthenumberofprogramsfoundonaspecificportis
switchofthelocalnetwork,youmustpress“+”buttonandenter DVB-S2BROADCASTING
After thesourceoftransportstreamhasbeen The dataentersthemodulatorwithoutany
And Portnumberofstreamsare addressspacespecifiedinmulticastmode
Multicastpacketsreceiving Unicastpacketsreceiving The port 15 AMD-53-S2 MODULATOR/ MUX MVDS processing. Inthismode,dataisreceivedfromoneorseveralports. IP-
˃ MUX
TROPHY mode
(withDEMUX/MUXprocessing).
TERRESTRIAL
DVB-S2BROADCASTING
The dataentersthemodulatorviapreliminary
Unicast packetsreceiving Multicast packetsreceiving 16 AMD-53-S2 MODULATOR/ MUX MVDS These thread. program Program PROGRAMS server - - - software source If allocated programs The service good values. belonging tothesameservicesimilarPID for Secondly program). that software the streams. one dif contains The also Y VPID T TYPE program a the in The eletext, ou s the not the ferent the c you each stream e video position can (FT SID/ allocation n is original names and practice multiplex TROPHY present; . Y configuration information OF d of a ou That name A, i the change name: purchased n 4-Unknown at in elementary , given Y the according names, PID services, PCR-PID stream g you license, T PROGRAM and can ou (some least
this ype1, information way will EIT EIT number o will must for to must change r stream channels)
case) d The TERRESTRIAL of be TROPHY one ,
contains from (EPG): give e and the be it's T can't A r. ype2, from displayed
has to to
you PID indicate will where automatically PID, audio easy ). program an stream. slots usuallyseveral and Y elementary the a of indicate belongs the ( be o a fixed form that 1-TV u T an same satellite; can additional Service the
name is to ype3). the VPID, identified ACCESS configured stream, a c each identify the was automatically pattern. external a , in the It's SID name number service n 2-Radio, to. select the value. the DVB-S2BROADCASTING
to PID specified SID basis normally streams c number generated, another service at type IDs table h by which mode data value a is EPG least n (the and EIT the the (or for g the 3- of of in of e
one. the service
which receiving coincides designation. devices. with They By the default, must name be specified for unambiguous. each in program, the incoming 17 the AMD-53-S2 MODULATOR/ MUX MVDS In mode. In resources, If tables, processes Basically EIT Systems. Software customers TROPHY there the case (EPG)Server case TROPHY it is of is , no the necessary using
it of this EIT is upon is using EIT necessary EIT provided
information (EPG)
TERRESTRIAL the
request. information
Streamers DVB other tables TROPHY to SER specify to EIT for to are IP and specify VER
servers,
Windows EIT from
present the EIT transmits DVB-S2BROADCASTING informationfromsatellite free
ORIGINAL NOT the (EPG) you software in satellite and
PRESENT must it satellite SER to Linux
(FROM the specify VER is and output provided broadcasting.
mode. Operating you 1Gb EthernetSwitch
you PROGRAM the do stream. mode T must ransport StreamsincludedEIT to not corresponding select accept In The SOURCE) EIT order TV Scheduleinformationfrom EIT AMD-53 informationfromEIT
the this to 200-240 (EPG)SER
Ethernet PRESENT V information AC L-band output use 50/60Hz mode. xmltv sources to xmltv AMD-53-S2 Modulator/Multiplexer modulator/multiplexer files this the satellite server
+ from SCHEDULE . VER SER program external VER 18 AMD-53-S2 MODULATOR/ MUX MVDS
TERRESTRIAL file 1" structure settings > > > > > > > > > > Address of configuration > > HBO Hustler TV1000 ITV CNN BBC MTV MUSIC BOXUkraine Address ofsyslogserver(optional) absent informationfromsource “Program ofXXXXX”isEIT AMD-53 modulator/multiplexer Name ofprogram into outputMUX
dif is TERRESTRIAL credits Format fers support together that details. from stored the was for most into listings broadcaster's. originally as DVB-S2BROADCASTING other a supplements, single in XML-based multiple unified created It doesn't languages listing. but TV by metadata listings Ed divide Each A and vis, formats programme listings each and like broadcast programme is in into that currently has channels, it is details written details can maintained have such instead from are 'language' stored the as by all name, user's 20 the the as AMD-53-S2 MODULATOR/ MUX MVDS running/not SDT the The Service other T PID, which describes Program it. service fundamental Program In multiplexermode,thedeviceautomaticallygeneratesfollowingservicetables: option specify aservernamethatwillsynchronizethecurrenttimeinNETWORKmenu(seepageNo.6). function (Universal T transport streamhassomeserviceinformationthattheMPEGstandarddeclaresmandatory for theservices. Original can beanynumberbetween1and65535. Every serviceinaDVBnetworkcanbeuniquelyidentifiedbythreevalues. digital describing thestructureoftransportstream,serviceswithinitandsomeusefulinformationthat Service informationisaspecialsetofelementarystreamsthatcontaindatabasetables SI GENERA Network ID(theofthenetworkthatoriginallybroadcastservice), T stream. a particulartransportstreamfromthatnetwork)andServiceIDtoidentifyservicewithin transport ogether ime ransport streamidentification(TS-ID): PMT Service
and typically tables and TROPHY stream is TV receiverscanshowtheuser (see Description Network s, of not , a Map Association the how there transport Date forming / running/starting are available, Description GMT) below) table T contains contains P T OR a A able specific is T
T service ID TERRESTRIAL able
These tablesarecollectivelyknownasServiceInformation(SI).EveryDVB only and time. TDT for [1..65535]. as T stream (PMT) able table you information service the well (TDT) , PMT one to T then The is able (SDT) DVB MPEG must put as - will SDT in
(P defined are you device the provide gives a A information. together Information contain systems. T) set few
known in Program need Network
such DVB-S2BROADCASTING - a “OFF” seconds) more defined does by transport a one . to as the as Unique identificationofthetransportstreamisgenerated. This time provide user-oriented value , suchasthenameofserviceandscheduleinformation not Information the Clock to PMT Program It MPEG by table identify describes and reference name have stream, in
for the Reference a the whether describes standard. connection each its of MPEG Specific the TDT T the and own information able which origin. service for
GENERA the service, that for real-time standard. for the all The Information service PID to the the contains the it stream. the Program contains. service. the transport about contains TION streams Internet is clock. service The scrambled the The services line. (PSI) The Map Program These valuesaretheOriginal Therefore, T information in the stream or ransport StreamID(toidentify TDT ID, a PMT and to T Program service, able the a in
or contains real-time
in are is a not. status Association transport is those not if defined for the and you broadcast Map every of table networks the server tells turned the T stream. by able current service. service T that the able The MPEG. . on Y “ON” . for receiver ou that actually a Unlike TS ID Ifthis is each must fixed UTC (e.g. The 21 use the the All AMD-53-S2 MODULATOR/ MUX MVDS possible order cable NIT was identification ETS original_network_id multiplexes Network NIT
GENERA generator originated, application to or TROPHY to minimize terrestrial Information transmit carried codes T supports OR the
TERRESTRIAL area. the systems. network_id via a for
NIT and T access a networks. able Networks the given
for transport_stream_id other NIT (NIT) IRDs network, and time
transitions DVB-S2BROADCASTING In are networks may the conveys the when assigned original_network_id case and be switching able in the between information that addition allow characteristics to individual the store between NIT each delivery to the
the is relating network_id TS transmitted shall actual NIT channels media to of
take information be the to network. uniquely the network the boundaries, values, on ("channel same physical the in itself. identified network value. which non-volatile e.g. hopping"). organization The serve on from throughout combination which memory satellite as It unique is the of also 22 the the TS to of in MVDS TROPHY TERRESTRIAL DVB-S2 BROADCASTING
MODULATOR PARAMETERS
In this menu you need to specify the parameters of the output carrier: Output frequency up 900 to 2150MHz; Symbol Rate up 1000 to 30000 kSymb per Second Modulation/FEC QPSK: 1/3, 2/5, 1/2, 3/5, 2/3, 3/4, 4/5, 5/6, 8/9, 9/10 8PSK: 3/5, 2/3, 3/4, 5/6, 8/9, 9/10 Roll-off 0,2 ; 0,25 ; 0,35 FEC Frame length Normal/short Pilot tone On/off Spectrum Inversion On/off Output attenuation up to -31.5 RF output On/Off
The actual bitrate at the output of the modulator is displayed as a blue scale at the top of the menu. Free capacity of the transponder is filled with zero packets if the subscription data does not come to the modulator from the billing server. The capacity occupied by zero packets is indicated in the form of a gray scale. OR/ MUX T
Payload rate: 30,155 Mbit (0,94%) Subs rate: 0 Mb
Free capacity is filled with subscription packages if the billing server sends TROPHY-ACCESS CAS data to the modulator. The efficiency of data transmission is maximum. The capacity that the subscription data occupies is indicated in the form of a yellow scale. Thanks to this technology, the CAS data transmission efficiency is maximum.
AMD-53-S2 MODULA
Payload rate: 30,155 Mbit (0,94%) Subs rate: 1,93 Mb
23 AMD-53-S2 MODULATOR/ MUX MVDS Attenuation range Main RFoutput Shoulders rejection SNR L-Band RF Output Encryption 0,25to120Mbps Streaming mode Streaming protocol Connector Stream port+WEBinterface SPECIFICA IP DVB MPEG-TSover MPEG-TS DVB-S2 Carrier ID Standards MPEG-2 PSI DVB MPEG-TSoverIP input TROPHY
TIONS
TERRESTRIAL T ables (P ASI A T ,PMT DVB-S2BROADCASTING ,NIT etc) 0dBm to-31.5dBm,0,1dBstep N < -50dB@0dBm&f/fN=1,5for20%roll-of > 40dB@0dBm–16APSK30Mbaud 900MHz to2150MHz,10kHzstep TROPHY CBR/VBR UDP RJ-45 Ethernet, 10/100/1000Base-T EN 300468(additionallicenseforEPGtable) ETSI EN50083-9; ETSI EN 301210 EN 302307 ETSI 103129 T ype, 50Ohm , Unicast/Multicast TS 102034 -ACCESS (additionallicense) TR 101891 f 24 AMD-53-S2 MODULATOR/ MUX MVDS V Pilots DVB-S2 frames Supported DVBmodes DVB-S2 Modulation PID quantitysupported Quantity ofmultiplexedchannels Multiplexer Individual addressable message Automatic decoderdisconnection The numberofpackets serviced The numberofservicedchannels Quantity ofaddressabledecoder Size ofthedecoderaddressfield T TROPHY Physical Control &Monitoring ype ofCAS ariable symbolrate TROPHY -ACCESS Options
TERRESTRIAL DVB-S2BROADCASTING VCM: V CCM: ConstantCodingandModulation 8PSK: 3/5,2/3,3/4,5/6,8/9,9/10 QPSK: 1/3,2/5,1/2,3/5,2/3,3/4,4/5,5/6,8/9,9/10 All PIDsofinputsevices up to120 SeamlessACM: OnorOf Short (16200),Normal(64800) 90 to240V 10/100/1000 Base-T W From 1to30Mbaud,step1Baud FPGA 0°C to50°Ctemperaturerange 2kg W up to120characters with zerobalancesinthe subscriberaccount without anyrestrictions without anyrestrictions 4,294,967,295 32 bits eb BrowserControl&Monitoring based,doesn’tmatchCSA eight ariable CodingandModulation f AC/50Hz/15W Adaptive CodingandModulation Ethernetports algorithm 25 SUBS_SEND SOFTWARE MVDS software management subscription SUBS_SEND_V TROPHY
TERRESTRIAL
DVB-S2BROADCASTING .2 26 SUBS_SEND SOFTWARE MVDS After confirmingthepayment,auniquekey http://dvb4all.com/?product=software-license-to-enable-trophy-access-scrambler-solution the yourmodulator/multiplexer modulator/multiplexer the appearedwindow After receivingthekeyyou caninputtotheSYSTEMmenu,click"Add key"buttonandenterthekeyin of theSYSTEMmenuWEBinterface. In Conditional Y On and fillingoutashortquestionnaire. http://dvb4all.com/?product=subs_send-subscription-management-program TROPHY the The Sending the need for the GENERAL The ou cangetthesubs_sendprogramforfreebygoingtosite: example, subscription simplest order necessary the subs_send program TROPHY to install site of -ACCESS for subscription text you for can INFORMA a information
the TERRESTRIAL access pay-TV is program professional file can changed. be . named CAS
TROPHY , easily download you in information system. is system the to must developed decoders.txt. used TION each billing -ACCESS hotel. , willsendtotheclient. DVB-S2BROADCASTING purchase the for modulator should T system. (CAS) o source communication manage for scrambling subscription a be , whichisformedonthebasisofserialnumber special It code built in done is subscription the enough of into license: after system. the between function The serialnumberisindicatedinthefirstline management. the the for subs_send the rights modulator This modulator/multiplexer administrator a to program third-party in be these The program is available turned subs_send is small ideal billing to in on make networks, for the or in software small restarted, program adjustments GO the there language. networks, TROPHY and sends and is 27 the no to if
SUBS_SEND SOFTWARE MVDS groups, etc.Inthefirststep,simplyassigngroup0toallmodulators/multiplexers. programs inwhichpackageswillbeincluded,thendistributethemoverstreams(modulators),subscription program viewingrights. Y 10.10.10.24: 2#themodulator10.10.10.24belongstogroup 10.10.10.23: 1#themodulator10.10.10.23belongstogroup 10.10.10.22: 0#themodulator10.10.10.22belongstogroup 10.10.10.21: 0#themodulator10.10.10.21(IP-addressofmodulator)belongstogroup # # Exampleofthemodulators.lstfile. ------Example Spaces areignored. The stringtotherightof#characterisacomment. modulator Each linedescribesonemodulatorintheform: the modulators.lsttextfile. The belongingofmodulatorstogroupsisdefinedin groups withnumbers0...9. the samesubscription. Modulators belongingtothesamegroupbroadcast A Modulators/multiplexers aregroupedtogether Modulators (streams)andgroups ou determinetowhichgroupthemodulator/multiplexerbelongsbasedonschemeoftarif groupcanhaveanynumberofmodulators. This isacomment TROPHY -ip- address
TERRESTRIAL : group-number The systemcanhaveupto10 When youinstalla DVB-S2BROADCASTING . Head-End . withseveralmodulators,youwillneedtoplanwhich
1Gb Ethernet ASI input MPEG Up to120 single TS input control 200-240 WEB
V Ethernet AC TS 50/60Hz L-band output MPEG
AMD-53-S2 Modulator/Multiplexer 200-240 T 1Gb EthernetSwitch
V Ethernet ransport StreamsoverIP AC 50/60Hz L-band output Demux
AMD-53-S2 Modulator/Multiplexer 200-240
V Ethernet AC 50/60Hz L-band output
AMD-53-S2 Modulator/Multiplexer Mux 200-240
V Ethernet AC 50/60Hz L-band output
AMD-53-S2 Modulator/Multiplexer 200-240 Switch
V Ethernet AC TS 50/60Hz L-band output
AMD-53-S2 Modulator/Multiplexer 200-240
V Ethernet AC 50/60Hz L-band output TROPHY scrambler
ACCESS AMD-53-S2 Modulator/Multiplexer Oscillator f plansand Local 200-240 -
V Ethernet AC 50/60Hz L-band output
AMD-53-S2 Modulator/Multiplexer 10MHz ref.+24VDC 5 7 1 3 L-band output L-band inputs 2 8 6 4
L-band 8-ch combiner 28 DVB-S2 QPSK/8PSK/16APSK/32APSK 90-264VAC 50/60Hz modulator SUBS_SEND SOFTWARE MVDS specify theENABLEDmode; menu, intheSCRAMBLERline, in themodulator Ÿ become scrambled,youmust: The modulator/multiplexercantransmitaprogramsinanFT Enabling thescramblingmode Subscription dataarefed decoder automaticallyswitchesof The BillingserverorSUBS_SENDsubscriptionmanagementsoftwareprovidesof the ensures The TROPHY Individual addressablemessage Automatic disconnectionofthedecoder The numberofpacketsserviced The numberofservicedchannels Quantity ofaddressabledecoders The sizeofthedecoderaddressfield Polynomial length T Options ype ofCAS enable thescramblingfunction hardware TROPHY TROPHY high -ACCESS CAS reliability of -ACCESS
. IntheSYSTEM TERRESTRIAL the TROPHY and CAS
to the lack
(Conditional MODULA DVB-S2BROADCASTING of AMD-53-S2 MODULA pirate f atazerobalanceinthesubscriberaccountnumber T viewing OR/MUX. Access (named up to120characters with zerobalancesintheaccount without anyrestrictions without anyrestrictions 4,294,967,295 32 bits 2048 bits Cardless, doesn’tmatchCSA System) T A OR/MUX overEthernetor Cardsharing). orscrambledform.Inorderfortheprogramto developed without Scrambler algorithm
CSA is ASI. fice.
performed algorithm, . The within which 29 SUBS_SEND SOFTWARE MVDS scrambled programs. subscription thatallowsorprohibitstheviewingof The modulatorsendstothedecodersinformationabout program. T select In thesettingofprogramthatyouwanttoscramble,needspecifythisshouldbeclosedand o do the this, TROPHY encoding in the PRORGAMS
TERRESTRIAL type in the CONDITIONAL menu, DVB-S2BROADCASTING click the
ACCESS PROGRAM field PROPER (T ype 1, TIES T ype icon 2 or T T T T in ype ype 1 ype 2 ype 3 FT the A 3). line of the corresponding 30 SUBS_SEND SOFTWARE MVDS A to thethirdtype. binary number Subscription allowsthedecodertodescrambleprogramsdependingonspecifiedmask. Mask andtypesofscrambling # # Exampleofdecoders.txtfile. ------Example Spaces areignored. The stringtotherightof#characterisacomment. decoder number:mask. Decoders aredescribedinthedecoders.txtfile.Eachlinedescribesonedecoderform: management ofprogramviewingrights. For eachdecoder 12345: 1 12347: 00001 12346: 010100000 A Decodernumber | |Groupmask2 |Groupmask1 |Groupmask0 | ------12348 :000 12348: 000 A -onmodulatorsofgroup0(10.10.10.21and10.10.10.22)FT -onmodulatorsofgroup1(10.10.10.23)programswithencodingtype3,aswellFT -onmodulatorsofgroup2(10.10.10.24)programswithencodingtype2,andalsoFT For example42-12345(Zone No.42,decoderNo.12345). A number andthedecoders.txt filespecifiesthedecodernumberwithouta zone (inthiscase-12345). A -onmodulatorsofgroup2(10.10.10.24)FT -onthemodulatorsofgroup1(10.10.10.23)programs withthetypesofencoding1and2,aswellFT -onthemodulatorsofgroup0(10.10.10.21and 10.10.10.22)allprograms; Each providerusing The fulldecodernumber consistsof2parts-thezonenumberanddecoder numberinthiszone. Decoder numberandgeographic zone unitinthecorrespondingbitindicatesthatthisdecoderisallowedtodescrambletypeofencoding. subscriberwitha12345decoderwillbeabletowatchallprogramsonstreams subscriberwithadecoder12346willbeabletowatch: subscriberwithadecoder12347willbeableto watch: subscriberwithadecoder12348willonlybeable toviewFT This isacomment TROPHY 1 1 1 1 1 , thel
TERRESTRIAL 1 , amaskisassignedforeachgroup.Inthiswayitpossibletoimplementseparate 1 1 1 ow TROPHY bitofwhichcorrespondstothefirsttypescrambling,andhigh -ACCESS CASreceives auniquegeographiczonenumber DVB-S2BROADCASTING A programsonly The subs_sendprogram comes withapresetzone . A programsonly; A programsonallthreads. A. A; . The maskisa A; 31 SUBS_SEND SOFTWARE posted In your The decoders.txt files. modulators. modulator decoders.txt subs_send_v2.exe shouldberunafteryoucreatethemodulators.lstand "T Y Save thisfileinthedirectorywhereissubs_send_v2.exe.Runnowsubs_send.cmd * Subs_send_v2.exe -z42* ------Create afilecalledsubs_send.cmdinanytexteditor command W The MVDS Theversionofthepr ou ar orking withthesubs_sendprogram the get" subs_send subs_send_v2.src can geographic on archive TROPHY field also the file is Y files. site. add ou create and restarted, program there zone. should -z run This
TERRESTRIAL 42 a it are In shortcut ogram compiledforthe42ndGeographicalZone. file program key from also is the order a . that two console sending the subs_send_v2.exe for you to files sends explorer: you the want application, DVB-S2BROADCASTING (run collected over subs_send_v2.exe to become to the the download program) network with so should acquainted you , Notepadforexample,withoneline: the for after subscription need be program, zone free making repeated, with to from run No.42 the it changes then the data program, from since by site in from the default, the should to subscription W the the an properties indows example modulators.lst above be for created W console. files indows of program data to this with modulators. is or Y shortcut, ou not x32 the for can number Zone stored and create in If 42 x64. 32 the the on of is a DVB_BILLING SOFTWARE MVDS DVB_BILLING_V software subscriber accounting TROPHY
TERRESTRIAL DVB-S2BROADCASTING .5 33 DVB_BILLING SOFTWARE MVDS - - - - namely: is The The How Ÿ Ÿ The program.
streamers. Ÿ Additional Ÿ the Ÿ Ÿ Ÿ
Ÿ The assembled Server The decoders The MAIN INFORMA DVB-BILLING
parser scripts the net_cam_server located Integration Displaying As creation input feed management keeping specification system program main main DVB-BILLING generator is DVB-BILLING part Repeat ./camserver killall cd everything TROPHY to can xmlTV for of / functions in components the of functions dvbserver service /var/db. updating records of by The is large camserver be the is EPG various real-time installed of cluster the files of Software launched either data the TROPHY
of EN TERRESTRIAL service commercial - arranged sequence information data subscriber dvbX, the software of of with Some Statistics of 300 programs program / reports technology generated subscribers' the bin the TION subscription of the on monitoring stream; TV 468) tables as statistics the and where the Statistics
base components simplest program inside? follows: comes of system on Linux into Server broadcasting Statistics decoders; is P and commands si_gen A station, payments. X . by designed DVB-S2BROADCASTING T the is payments; , data server auxiliary OS PMT server Server with the the xmlreadEPG; (demo are with transport with Debian of stream the Statistics , of a located Billing CA the are: the Statistics with on are: its the DVB to Server files. version) T system streamers; , all configuration TSDT manage stream; its 4.0. number system
threads. in networks. configuration Server the takes Server , of NIT or /opt . bank are the the , full is SDT . directory file Depending sent located payment subscriber control most , si_gen.conf; camserver EIT to complex, , . of the TDT Firebird in terminals. the the on streamers base
(formed .conf DB100, the /home/palich/bin/ is up sales and database. file; to in DB800 using manage a full order group compliance the , The and the subscriber of dvbserver database DB800CI directory Statistics servers with 34 , DVB_BILLING SOFTWARE MVDS Interface Language Main parametersofDVB-BILLINGSubscribers Number ofchannelsserved Number ofservicedpackets Number atatimeservedcustomers on whatnumberispaid. makes moneytotheclientonaccountandshows When youmakeapayment,theprograminstantly zero balanceonsubscriber'saccount Automatic decodershutdownwhen number Registration dataafterassigningthedecoder Automatic additionoftheContractDateand period installation therequiredapplicationforacertain The abilitytoquicklyaddclientdecodernumberand automatic activationataspecifiedtime The possibilityoftemporarydisconnectionand Ability toenterdif Ability toprintreports criterion specifiedinthesearchlist Ability toperformaquicksearchofcustomersbyany Sending addressmessages Interface type need todepositmoneyintotheaccount Automatic sendingofaddressmessagesabout the Architecture type
Information aboutsubscribers T ypes ofreports: TROPHY
TERRESTRIAL ferent tarif
fs
DVB-S2BROADCASTING
Accounting Program
English, Russian No restrictions No restrictions No restrictions In VIEWmode Y Y Y Y Y Y Y Up to120characters WEB Y Open phone, city Contractnumber For paymentsfortheperiod,services, es es es es es es es es for disabledsubscribersacertaindate tarif fs, forbalance,viewingchannels, , street,house,apartment,e-mail, , DateofContract,name,
notes 35
DVB_BILLING SOFTWARE MVDS The MainMenuReview Packet Stat- V Decoders casting Broad- <-PIDs Channels -Channels Streams< Channels /Packets Channels Streams Report Payments Payments Courses Delete Change New Search Users UserList TROPHY
TERRESTRIAL iewing DVB-S2BROADCASTING V V Managing thelistofdecoders V Assignment ofPIDsforbroadcastchannels Assignment ofchannelstobroadcaststreams Managing thelistofbroadcastchannels Managing broadcastingstreamslist Report onthereceiptofpaymentsforperiod. Enter andeditpaymentsforthecurrentsubscriber System Removing asubscriberfromthesystem.Completelyandforever messages tothereceiver schedules fordecoders,apricepackagethedecoder Change thesubscriber'scredentials,assignitdecoders, New subscriberregistration. Search forasubscriberbyoneormorecriteriaofmenu schedule fordecoders,thecurrentbalanceofaccount,etc. V iew statisticsofsigneddecodersbystreams iew thestatusofdecoderonthreads(debugging) iew thecompletebroadcasttableforallstreams iew alistofsubscriberswithdetails,decoders, Accounting Rate . . , send 36 DVB_BILLING SOFTWARE MVDS The MainMenureview the Nowin EPG casting Broad- Messages Logs Regions Rights Groups ation Install- Users V Streams Prices<- Prices
TROPHY
TERRESTRIAL iewing ( Air continue DVB-S2BROADCASTING ) Management ofpricepolicy V Manage thelistofregions. Assigning rightstousersofthesystem. Manage thelistofusergroups. price packages.Changepasswords. filters forthedivisionofsubscriberbase,andlist Manage thelistofuserssystem,assignment Manage users,rights,regions,messages,EPG. Reserve Assignment topricepacketsofbroadcaststreams Management ofthelistpricepackages. V The EPGeditor events inthedatabaseanddateoflastEPGevent. List ofbroadcastchannelswithEPG,thenumber channels withEPGeventsonthesechannels. Displays thelistofprogramsthatarenowonair iewing andclearingthesystemlog. iew anddeletemessagessenttosubscriberreceivers. . . , broadcast 37 DVB_BILLING SOFTWARE MVDS Main MenuReview Quit Prices Services Users 2 Balance Balance viewing Channels disabled be Reports Whowill TROPHY
TERRESTRIAL ( ending ) DVB-S2BROADCASTING Services forthecurrentsubscriber registered decoders(byregion). Report onthenumberofsubscribers,switched day ofthismonth. date foranothermonth,abalanceisdisplayedasofthelast balance isissuedasofnow If inthe"Period"fieldisanydateofcurrentmonth, Extended balanceforsubscriberspermonth. Balance forcurrentsubscribers,accountbalanceandcredit. for anyperiod,bydefault-today The reportonviewingbysubscribersofbroadcastchannels, before disconnectioncanbechanged. the systemafter3days(bydefault). This reportdisplayssubscriberswhowillbedisconnectedby by him,perday Sign Out and theregion. numbers withthepossibilityoffilteringbypricepackage Report onsubscriberswiththeirpricepackagesanddecoder , perperiod. . Ifthe"Period"fieldindicatesa , foralldecodersregistered . The numberofdays f and 38 BILLING SERVER MVDS BILLING SER W Password: 12345678 Name: root Address oftheBILLINGSER Repeatthesequenceofcommandsonalltransponders. . /CamserverdvbX,whereX-numberoftheflow killall camserver cd /dvbserverbin STREAMERs. BILLING information The e recommendtoreplacethenameandpasswordconfidential. BILLING Runningoftheprogramisasfollows: TROPHY SER
SER VER
(formed The
TERRESTRIAL VER manages VER BILLING provides in full VER is10.10.10.254. the accordance SER the DVB-S2BROADCASTING 8PSK VER data data to flow with IP
of enter STREAMERs EN EPG, . 300 to P the A 468 T , DSC-01 PMT and
specification) , CA monitors T servers , TSDT the , using NIT
to work , the SDT dvbserver of
, DSC-01 EIT the , TDT 8PSK
software. servers.
service to 39 IP
BILLING SERVER MVDS T Interface T automatic inclusionandataspecifiedtime. The abilitytotemporarilydisablethe Ability toenterdif The abilitytoreportoutputprint. any criteriaspecifiedinthesearchlist. The abilitytoquicklysearchcustomerby how manypaidwhenmakingapayment. account ofthecustomerandshowsby Program bringsmoneyinstantlytothe balance onthesubscriberaccount. Automatically closingofthedecoderatzero after assigningnumberofdecoder Automatically addRegistrationDate Automatically adddatesofthecontract. Customer information. Number ofconcurrentclients. Number ofservicedpackages. Number ofservicedchannels. Billing programoptions ype ofarchitecture ypes ofreports. TROPHY T ype
TERRESTRIAL ferent tarif fs. DVB-S2BROADCASTING . Open WEB certain date. channels fordisabledcustomersona rates onthebalancesheet,viewing Payments fortheperiodofservice,at there is there is there is there is in VIEWmode there is there is there is № phone,notes. house number Contract number no restriction no restriction no restriction , apartmentnumber , name,street , 40 10MHz & DC INJECTOR MVDS Part No.8001-8003 INJECT DC&10MHz reference AMD series TROPHY OR
TERRESTRIAL DVB-S2BROADCASTING L-band output +24V/6A L-band input +10MHz ref. +24VDC 90-2 64V DC AC 50/60Hz
41 L-band 10MHz & DC INJECTOR 10MHz & DC INJECTOR MVDS Modules has MVDS orVSA signal passes GENERAL AMD The Deliveries connectors. GENERAL particular The connected. All regulations When technician. The settings, SAFETY When INST
Embedded 24 VDCembeddedPSU embedded assembly provisions devices deviceisDC&10MHzreference ALLING and series TROPHY L-band assembling components are Features
always INSTRUCTIONS , INFORMA 200-240 24VDC DIN are
DESCRIPTION intended are Ethernet V AC F L-band output T , are 50/60Hz DC&10MHz AND OPERA 24V ANs made BUC(BlockUpConverter).Injector signal EN installation
observed. of TERRESTRIAL follow AMD-53-S2 Modulator/Multiplexer not DIN 60728-1 voltage / 6A and L-band output with +24V/6A L-band input +10MHz ref.
are TION for +24VDC and 90-2 to
EN power 64V the DC AC indoor be commissioning 50/60Hz the being injects 50083 accompanying 1 (optional) and TING INSTRUCTIONS OF assembled L-band 10MHz & DC INJECTOR reference regarding following PartNo. supply use FUNCTIONS installed DVB-S2BROADCASTING cable 10MHz must only unit for configurations/ INJECT safety connection . be INJECT and (optional). feeding the in reference instructions observed areas brought DC&10MHz may OR OR of on . 8001 where must The inputandoutputsignalsareprovidedvia N- at + no into device exactly all account 8002 8003 take times use reception reference versions: . by place output +10MHzref. input+DC L- bandL-band when be anybody Oscillator 10MHz + Local ignored.
is INJECT when working important, who Combiner no OR
with electricity is
and not ensure the (optional) +24VDC up to6A PSU an executing equipment. authorised has that been EMC the 42 In 10MHz & DC INJECTOR MVDS W Dimensions W Physical AC frequencyrange AC current Power Factor Input DC Ripple&Noise(max.) Rated power(optionalF Rated power(convection) DC ratedcurrent(optionalF DC ratedcurrent(convection) Injection DCvoltage RF interface 10 MHzref.level 10MHz referencestability Insert loss950...2150MHz Input signalfrequencyrange SPECIFICA eight orking temperature TROPHY AC voltage TIONS
TERRESTRIAL ANs) ANs) DVB-S2BROADCASTING 0...4.2A + 24VDC(PartNo.8001,8002) 2 xN-connectors,50Ohm +5 dBm +/- 10ppm 1 dBmax 950...2150MHz 0...6.25A 90...264V 240mVp-p 150W 100W PF>0.95/230V 2kg W 245x132x51mm 0°C to+70°C 47...63Hz 1.8A/1 eight 15V (PartNo.8001) (PartNo.8002) AC/150W AC 1 AC PF>0.98/1 A/230V AC 15V AC atfullload 43 L-BAND 8-channel COMBINER MVDS Part No.12001-12003 DC&10MHz reference 8-channels COMBINER/ L-band AMD series TROPHY
TERRESTRIAL DVB-S2BROADCASTING 10MHz ref.+24VDC 5 7 1 3 L-band output L-band inputs 2 8 6 4 44 90-264VAC 50/60Hz L-band 8-ch combiner L-BAND 8-channel COMBINER Modules has MVDS voltage carriers, D GENERAL A MVDS Deliveries provide The GENERAL particular The connected. All regulations When technician. The accompanying When SAFETY INST M C
Embedded 24 VDCembeddedPSU & D embedded assembly 1
provisions
devices device ALLING 0 200-240 TROPHY s Ethernet or M assembling V AC (optional) L-band output components 50/60Hz e Features are via H
r
AMD-53-S2 Modulator/Multiplexer VSA INSTRUCTIONS , i INFORMA injects Z e DIN are
SMA-connectors DESCRIPTION s
intended are 200-240 is
F Ethernet V AC , are L-band output T R 50/60Hz AND OPERA ANs L-BAND 24V made L EN
installation E instructions observed. of BUC
AMD-53-S2 Modulator/Multiplexer - TERRESTRIAL F B and not 10MHz DIN 200-240 E 60728-1 A / and Ethernet V 6A AC R L-band output N 50/60Hz with
are TION for (Block to E
passes AMD-53-S2 Modulator/Multiplexer D
EN power 8-CHANNELS commissioning N
indoor be 200-240 C the being
Ethernet 8 V reference AC 50083 L-band output E 1 50/60Hz - and TING INSTRUCTIONS exactly OF assembled C
regarding Up following
PartNo. AMD-53-S2 Modulator/Multiplexer and supply H group c use FUNCTIONS 200-240 o A installed Converter). cable Ethernet DVB-S2BROADCASTING V m AC L-band output output N 50/60Hz must . b N AMD-53-S2 Modulator/Multiplexer only i n signal E unit signal 200-240 e configurations/ L COMBINER/ safety
connection Ethernet be the V . s AC L-band output S 50/60Hz and signal
(optional). in
AMD-53-S2 Modulator/Multiplexer observed e COMBINER C for i areas 200-240 g and brought COMBINER O may Ethernet V h AC L-band output 50/60Hz is feeding M t
AMD-53-S2 Modulator/Multiplexer provided 10MHz ref.+24VDC B 5 7 1 3 L-band output 12001 24VDC L L-band inputs on I 2 8 6 4 where - N must b DC&10MHZ at + no E a into device n R all 90-264VAC 50/60Hz L-band 8-ch combiner of d and account / 1200212003
take times use via reception executing versions: N-connector by place when be REFERENCE L- band anybody inputs + ignored.
Oscillator is when
10MHz working Local the important, . settings, who no
with . electricity The is not ensure the Combiner always input an equipment. (optional) +24VDC up to6A PSU +10MHz signals authorised L-band output Group has that signal follow +DC ref. been EMC are the 45 In L-BAND 8-channel COMBINER MVDS W Dimensions W Physical AC frequencyrange AC current Power Factor Input DC Ripple&Noise(max.) Rated power(optionalF Rated power(convection) DC ratedcurrent(optionalF DC ratedcurrent(convection) Injection DCvoltage RF interfaces 10 MHzref.level 10MHz referencestability Insert loss950...2150MHz Number ofinputs Input signalfrequencyrange SPECIFICA eight orking temperature TROPHY AC voltage TIONS
TERRESTRIAL ANs) ANs) DVB-S2BROADCASTING 0...4.2A + 24VDC(PartNo.8001,8002) 8 xSMA +5 dBm +/- 10ppm 10 dBmax Eight 950...2150MHz 0...6.25A 2kg W 245x132x51mm 0°C to+70°C 47...63Hz 90...264V 240mVp-p 150W 100W 1.8A/1 PF>0.95/230V eight 15V (PartNo.8001) connectors,1xN-connectors,50Ohm (PartNo.8002) AC/150W AC 1 AC PF>0.98/1 A/230V AC 15V AC atfullload 46 Optical transmitter and optical receiver MVDS and opticalreceiver(OPT Optical transmitter(OPT TROPHY
TERRESTRIAL DVB-S2BROADCASTING -TX DT) -RX DT) 47 MVDS TROPHY TERRESTRIAL DVB-S2 BROADCASTING
SAFETY WARNING.
The product must be installed by a qualified engineer, according to the local safety standards and regulations. The product is classified as Class II, in accordance with EN 60065, and for this reason it doesn't need to be connected to the protective earth (PE) of the mains supply.
Installation warnings
Only use the original power cable (adaptor) supplied and install the product so that the mains plug is easily accessible. The product must not be exposed to dripping or splashing liquids and so must be installed indoors in a dry place. Humidity and condensation could damage the product. In case of condensation, wait until the product is dry before using it.
Don't install the product above or close to heat sources, in dusty places or where it might come into contact with corrosive substances. Keep the product away from heat sources to prevent some parts or components of the unit to catching fire. To fix the product to the wall use suitable expansion bolts.
Leave enough space around the product housing to ensure sufficient ventilation. “An excessive operating temperature and/or excessive heat may affect the performance and the life span of the product.”
Never look inside the product's optical connectors. The laser radiation is not visible with the naked eye and therefore it is not possible to prevent long term damage. When working with the splitter's optical connectors make sure that the lasers of any optical transmitters connected to it are switched off.
In accordance with the European Directive 2004/108/EC (EMC), the product must be installed using devices, cables and accessories that comply with this directives requirements for fixed installations.
Aerial system earth connection The unit must be connected to the ground electrode of the antenna installation according to the standard EN60728-11. We recommend following the provisions of standard EN60728-11 therefore not connecting the ground electrode to the earthing of the power supply network.
IMPORTANT: Only trained and authorised personnel can open the product. In case of failure, do not try to repair the product; otherwise the guarantee will no longer be valid.
INVISIBLE LASER RADIATION
and optical receiver DO NOT VIEW DIRECTLY WITH OPTICAL INSTRUMENTS (MAGNIFIERS) CLASS 1M LASER PRODUCT LASER RADIATION Optical transmitter
48 MVDS TROPHY TERRESTRIAL DVB-S2 BROADCASTING
Product description
Optical transmitter (OPT-TX DT) and optical receiver (OPT-RX DT) for distributing satellite and digital terrestrial signals through a single-mode fibre optic cable.
The incoming RF signals to the OPT-TX DT transmitter are converted and distributed through a single- mode fibre optic that can be split by splitters and passive taps enabling them to be sent to multiple optical connections (PON=Passive Optical Network) using a single transmitter.
The OPT-RX DT receiver converts the incoming optical signal in to 4 universal outputs, therefore enabling the TV and SAT signal to be available for 4 different users. The system requires the use of a conventional LNB and provides a traditional 5 core output (4 SAT + 1 TV) to enable a cascadable installation to additional transmitters or to a traditional multiswitch system.
The AGC (Automatic Gain Control) in the transmitter makes the product configuration much easier by automatically adjusting the input signal level to the optical laser.
SAT TV Test Test Input Input SAT TV }
OPT-TX DT
Alarm LED } Power on LED SAT TV Optical Power Supply Output Output Output
SAT INPUT: F input connectors for the four IF satellite polarities (950 - 2150MHz) with LNB remote power. TV INPUT: F input connector for the TV signal (87 - 862MHz) . TEST SAT: F output connector for the SAT test signal, HH polarity (RF level: 60dBμV per transponder). and optical receiver TEST TV: F output connector for the TV signal 87 - 862MHz (RF level: 74dBμV overall power). OPTICAL OUTPUT: SC-APC output connector for the optical transmitter for the fibre link. SAT OUTPUT: F output connectors for the four IF satellite polarities (950 - 2150MHz) for possible cascade applications to other devices TV OUT : F output connector for the TV signal (87 - 862MHz). POWER ON LED: On (green) to show the product is turned on. ALARM LED: the alarm LED shows that the transmission laser is not working correctly. Earthing the antenna installation (according to EN60728-11 standard). Optical transmitter
49 MVDS TROPHY TERRESTRIAL DVB-S2 BROADCASTING
Optical Input Power on led
OPT-RX DT } TV + SAT output
OPTICAL INPUT: SC-APC input connector for the optical receiver. Used for the fibre link for the satellite polarisation and TV signals. TV+SAT OUT: 4 F connectors for mixed TV+SAT outputs (87 - 862MHz, 950 - 2150MHz). POWER ON LED: On (green) to show the product is turned on. Aerial system earth connection (according to EN60728-11 standard). System Functions: The headend system in a fibre optic distribution network uses traditional receptive devices, i.e. aerials, dishes and traditional LNB's and any signal equalisation and amplification units. TV and SAT signals are sent to an OPT-TX DT optical transmitter, which converts the electrical signals into luminous signals, therefore enabling the distribution via a fibre optic infrastructure over long distances. Like traditional systems, each time this signal has to be split over a number of lines, a device called an optical divider or optical splitter (VOV or VOT) is used this splits the signal into a number of optical transport lines without any fall in quality even with a calculated attenuation. Once the optical signal is in the vicinity of the unit to be served, it is reconverted into a traditional signal by the OPT-RX DT optical receiver which on output generates the RF signals provided to the end user by means of traditional components (coaxial cables and filtered outlet sockets).
ATTENTION: A direct optical connection cannot be made between the OPT-TX DT and OPT-RX DT. The connection can only be made using optical line attenuators as the overall input power to the OPT-RX DT optical receiver must not exceed -7dBm. Check the optical level of the signal on the fibre using an optical light meter before connecting it to the OPT-RX DT receiver. and optical receiver Optical transmitter
50 MVDS TROPHY TERRESTRIAL DVB-S2 BROADCASTING
Connections The OPT-TX DT transmitter and OPT-RX DT receiver both have an SC-APC optical connector. The splitters and dividers in the VOV and VOT series have sockets for MINI connectors. Use the SC-APC -> MINI links (PR ADAPT, code 287226) to connect the OPT devices to the optical distribution (VOV and VOT devices). We provide patch cables with MINI connectors of different lengths for connecting the passive VOV and VOT devices.
SC/APC Fibre Optic Connectors
MINI Fibre Optic Connectors Ferrule
Protection cap
Attention: To conserve and protect the contact surfaces of the optical connectors the bushing and ferrule protectors should be left in position until the connections are made or can be cleaned using the correct tools.
Installing and removing the fi bre cable to the VOV and VOT devices:
1) Remove the protective 2) Insert the connector 3) To remove the fi bre, cover from the connector following the guides until it press the connector and without touching the ferrule. clicks into place. pull out the cable. and optical receiver Optical transmitter
51 MVDS TROPHY TERRESTRIAL DVB-S2 BROADCASTING
USER INSTRUCTIONS.
Dimensioning a Fibre Optic system.
When designing a fibre optic system it is important to consider the optical input level to the OPT- RX DT receivers, suitable attenuation is required and must be calculated at each point to ensure the system falls within the required parameters. The optical output power from the OPT-TX DT transmitter is fixed (+7.5dBm typical).
The OPT-RX DT receivers can guarantee that the correct level of TV and SAT signals are available to the end users sockets. This guarantee is on the proviso that the input level of the optical signal is between -8dBm and -14dBm therefore giving an optical attenuation range of 15 to 21dB.
ATTENTION: Direct connections are not allowed between the OPT-TX DT and OPT-RX DT, unless the correct line optical attenuators are used. An optical signal reader must be used to check the optical input level to the OPT-RX DT and to prevent damaging the receiving photodiode (damage can be caused if the optical input signal is higher than 0dBm). If the quality of the input signals are not optimised, or if a lot of signals have to be distributed to a lot of sockets, the optical budget should be reduced or professional splitters should be used with SC-APC connectors.
Requirements for the input signal to the OPT-TX DT optical transmitter
For the signals to be correctly transmitted through the fibre optic, the RF signals must respect the following requirements:
TV (DTT/CATV) To ensure the TV signals are transmitted and received correctly, the input signals to the transmitter should be equalised, especially if a lot of channels are being transmitted.
As an indication, the input signals should respect the following requirements:
1. The transmitter signal level should be ≥ 74dBμV to guarantee correct reception by the OPT- RX DT receivers, even after an optical attenuation of 21dB.
2. Overall input power: -19dBm (90dBμV)
3. The overall power ≤ -19dBm (90dBμV) is guaranteed in the following cases: 40 TV channels equalised at 74dBμV 20 TV channels with a maximum level of 77dBμV 16 TV channels with a maximum level of 78dBμV 8 TV channels with a maximum level of 81dBμV
If the TV input signal quality is not optimal or not correctly equalised, then the system should be and optical receiver designed considering an optical attenuation lower than 21dB to guarantee correct signal reception at the socket (especially when a lot of channels are being transmitted).
FM and DAB The FM and DAB signal levels should be at least 10dB lower than the overall input power of the TV signal. Optical transmitter
52 MVDS TROPHY TERRESTRIAL DVB-S2 BROADCASTING
SAT
1. Input signal level: 69-86dBμV The input transponder level to the OPT-TX DT must be between 69 and 86dBμV for the ACG to function correctly. 2. Band flatness: 4dB The transponders should be equalised within the same polarity so that the maximum difference in level between the transponders transmitting through the fibre is 4dB, to ensure the receiver is able to receive correctly.
The output levels to the OPT-RX DT optical receiver.
The output level to the OPT-RX DT optical receiver depends on the number of signals transmitted through the fibre and the optical attenuation of the section. Remember that 1dB of optical fall equals 2dBμV of attenuation to the electric level (RF). Below some reference levels are given for the output signals to the receiver: TV (DTT/CATV) The overall output power is -27dBm (82dBμV) with 21dB of optical attenuation which means that the fewer multiplexes that are transmitted, the better the output level and quality.
RF output level per MUX No. of Muxes Receiver optical Input -8dBm Receiver optical Input -14dBm 40 73dBµV 61dBµV 16 77dBµV 65dBµV 8 80dBµV 68dBµV 4 83dBµV 71dBµV
Table 1 Indications of output levels to the OPT-RX DT – TV signal
N.B.: 1dB optical equals 2dB at electric level (RF).
SAT The typical output SAT signal level to the OPT-RX DT is: Ÿ 74dBμV for transponders with an optical level of -14dBm input to the receiver (21dB of optical attenuation) Ÿ 86dBμV for transponders with an optical level of -8dBm input to the receiver (15dB of optical attenuation) Ÿ FM and DAB The FM and DAB signal levels respect the difference of input level in relation to the TV signal.
N.B.: The signal levels to the user sockets must respect the set points given in the EN50083-7 standard (DTT: 45-74dBμV – SAT: 47-77dBμV). In certain cases the RF output signal from the and optical receiver receiver, or if possible the input optical signal, will have to be attenuated by means of passive components such as optical line faders. Optical transmitter
53 MVDS TROPHY TERRESTRIAL DVB-S2 BROADCASTING
SAT 1 MVDS TROPHY HEAD-END VL HL VH HH DVB-T2
OPT-TX DT
SAT 1 +DVB-T2 OPT -RX DT Fibre optic
VL HL VH HH
VL HL VH HH DVB-T2
OPT-TX DT OPT -RX DT
Fibre optic
VL HL VH HH
L-band L-band + External IP UHF MPEG Transport Streams S/S2 or T/T2 to IP streamers
Billing Server IP IP IP IP
IP IP IP
DVB-S2 modulators / MUX and optical receiver 950-2150MHz Any part of 3.7...30GHz range. 2W Slot transmitting DVB-S2 standard. Block UP Converter antenna Optical transmitter
54 MVDS TROPHY TERRESTRIAL DVB-S2 BROADCASTING
TECHNICAL SPECIFICATIONS
Home Fibre Transmitter OPT-TX DT Part No. 270694 RF inputs No. 5 (4SAT + 1TERR) RF outputs No. 7 (4 SAT + 1TERR + 2TEST) Optical output No. 1 SC/APC SATELLITE INPUTS Bandwidth MHz 950 - 2150 Connectors type F Female Input return losses dB 10 Trunk line insertion losses dB <2 RF input level dBµV 69 - 86 TERRESTRIAL INPUT Bandwidth MHz 87 - 862 Connector type F Female Input return loss dB 10 Trunk line insertion loss dB 2 Overall input power dBµV 90 TEST OUTPUTS Bandwidth MHz 87 - 862/950 - 2150 (HH polarity) Connectors type F Female Output return losses dB 10 74 (TV) overall power RF Output level dBµV 60 (SAT) per transponder OPTICAL OUTPUT Connector type SC/APC Wavelength nm 1310 Optical output power dBm +7.5 Optical return loss dB >45 Safety class 1M MAIN FEATURES Mains voltage Vac/Hz 184 - 264/50 – 60
and optical receiver Power consumption W 15 LNB remote powering mA 200@14V (4 SAT connectors) Operating temperature °C -5 to +50 AGC RF level dynamics dB 20
Power on green LED LED information Extracurrent on laser red LED
Optical transmitter Dimensions L x H x W mm 230 x 230 x 50
55 MVDS TROPHY TERRESTRIAL DVB-S2 BROADCASTING
QUAD Home Fibre Receiver OPT-RX DT Part No. 270693 Optical input No. 1 SC/APC RF outputs No. 4 (TERR + SAT) OPTICAL INPUT Optical connector SC/APC Wavelength nm 1310 Optical return loss dB >45 Optical power (min - max) dBm -8 to -14 RF OUTPUTS Bandwidth MHz 87 - 862/950 - 2150 Connector type F Female Return loss dB 10 77±5 (TV) overall power RF output level @ optical -14dBm dBµV 66±5 (SAT) per transponder Output sat control DiSEqC MAIN FEATURES Mains voltage Vac/Hz 184 - 264/50 - 60 Power consumption W 7 Operating temperature °C -5 to +50 LED information Power on green led Dimensions L x H x W mm 250 x 125 x 50 and optical receiver Optical transmitter
56 DVB-S2/T2/C to IP STREAMERS MVDS to IP DVB-S/S2 &DVB-T/T2/C Common Interface STI-410C SDI-410C TROPHY STREAMERS
TERRESTRIAL DVB-S2BROADCASTING 57 DVB-S2/T2/C to IP STREAMERS MVDS Ÿ Ÿ Ÿ Ÿ Ÿ Ÿ Ÿ Ÿ Ÿ Ÿ Ÿ Ÿ Ÿ Ÿ Characteristics: Modules can case an DVB-S/S2 PRODUCT Configurable Configurable QoSmarking. Routing orblockingforCA P T PSI/SI parsing. PID information SAP SNMP W UDP Information multicast Output: Input: IP be ransparent ECM&EMMmessaging. A eb
of T network , PMT filtering. viewed TROPHY
interface encrypted & & one are
agent R SDP (SDI-410C), up TP addresses andSDT intended DVB the to
to using filtering transmission
for protocols T DESCRIPTION
external 24 for TERRESTRIAL services ime transport signal, monitoring configuration simultaneous, an for T tableregeneration. of o Live. and IPTV DVB-T/T2/C DVB indoor servers. a (TV that one CAM stream protocols. set-top T tables. and , EIT or facilitate MPTS use DVB-S2BROADCASTING Radio containing and alarms. (MPTS). , IP-encapsulated only box TDT (STI-410C) setting. stream. programmes) . or automatic tables. a the software operator's to IP service services
video issued streamers smart player selection from (TV designed card . FT or A Radio on
must or encrypted the to fit programs), broadcast user's the slot. digital STB The in with reception; and multicast IP individual
streams provide 58 on in DVB-S2/T2/C to IP STREAMERS Ethernet 1 socket. 13 12 10 9 8 á interface. 6 interface. 5 socket. 4 3 preamplifier RF 2 å 1 FRONT í É ê Ñ ~ Å É K MVDS b í Ü É ê å É í = Å ç å í ê ç ä = í Ü É = ç Ñ = 1 ~ Ç Ç ê É ë ë = f m = - - - - - Ç É Ñ ~ ì ä í = - ë É í = í ç = - if if not is second, if if if Comments Within Connect Connect Connect Fasten Disconnect All Read Installation instructions: ë É Å ç å Ç ë = - - í Ü ê É É = - +12 Power RF input CA í Ü ~ å = - - ACTIVITY ã ç ê É = - Ñ ç indicator ê = Ä ì í í ç å = no communication the the í Ü á ë = LINK/ACTIVITY DVB-ASI status m ê É ë ë = IP input inactive ã ç Ç ì ä É K = ETHERNET í Ü É = LINK TS/IP ê É ë í ~ ê í = í ç = settings ë Ü ç ê í ä ó = Ä ì í í ç å = í Ü á ë = glows;
m ê É ë ë = output module Ä ì í í ç
å K = o b p b q = input J = T = streaming V TROPHY link input
the of P powering 5-20 interface. ANEL the distribution of SA
indicator if (green) with power the all OUT safety signal IP (sti410C); blinks - signal (input module terrestrial T
can output indicator of necessary seconds power (yellow) slot.
streaming
75 IF the the
-
TERRESTRIAL signal, be Ω supply is - instruction streaming input at PCMCIA signal control is via front (green). indicator load
control active (yellow) (for made supply frequency on bus present indicator blinks the of TV (screw DIN another DC to panel RF in powering connector loop-through). control Ethernet using , the to the ,
unit socket. output Ethernet RAIL cable powering indicator first. at Ethernet mains. - of unused indicators: the - terminal). irregular about from of models). the LINK/ACTIVITY the DVB-S2BROADCASTING
Ethernet or the status the for TV . interface web individual the control one of , LNB control interface. and RF module interface. DC the F mains intervals, browser indicator output time socket. control interface (sdi410C); streaming output is Ethernet Ethernet holder will per before established F
RJ45 RJ45 via [1 cables. if run [12] second. sockets. 1] no for is . control in make indicator active blinks link normal 13 12 of 1 - 5 3 7 6 2 all 1 Ethernet the - at the the connections frequency blinks operation LINK streaming ACTIVITY interface. [6] at indicator frequency mode. about Ethernet of 10
4 [5] modules. indicator three glows; about interface times blinks; six per - times indicator second, 1 59 per 8 9 DVB-S2/T2/C to IP STREAMERS user seconds Control TCP/IP During Note: admin. will Access module, 192.168.1.10, Subnet mask: IP IP Default Gateway: Username: Password: T PC/MAC cable (CA computer equippedwithanEthernetcardandRJ-45 The programme Subsequently avoid All INITIAL MVDS o accesseachmodule,useaPCorMACpersonal addressofthestreaminginterface: addressofthecontrolinterface: modules appear modules name the conflicts Enter TROPHY
initial CONFIGURA configuration interface to open and default T must the and on -5E orCA admin admin it leave the leave configuration release or , the your since 255.255.255.0 site with it password be to user password
will TERRESTRIAL IP screen. 192.168.1.1 check the web is the configured other
this address be T as protected name it. TION -6). factory factory browser After possible explained is is set IP the The IP operating - you
and admin addresses, to reset this IP with with admin. within by password need
and address addressofthe DVB-S2BROADCASTING to operation on the - user this to 192.168.1.10 access can type status. section default to following the 192.168.1.1 control (and name it change of in is and following the the the the necessary must) procedure: in click and Ethernet module following Control control modules the the 1 be password. on "IP range: default changed "Login"
settings". to interface to Ethernet interface direction: press via be perform 192.168.1.2 configured). control the button. The the as interface IP local IP explained http://192.168.1.10. an
default "RESET" address
and address: initial area T streaming - TCP/IP o user 192.168.1.254 network configuration start will in [7] 192.168.1.10. the be name button the
configuration: "IP set Ethernet (LAN), configuration
settings". The and to for in 192.168.1.10, login more (do password either local In interfaces order not prompt than mode. of to 60 use the re- to is 3 DVB-S2/T2/C to IP STREAMERS MVDS displayed. In voltage output In "Up be "System "IP "IP "Hardware "Software "Serial "Device This Device the title Also which Using In general The GENERAL Initial the the the selected
2": 1": "Logout" can time": shows first common TROPHY top "Diagnostic "Common menu it, program IP IP bit number": in information information model": be you
time": address address screen of V rate version": time CONFIGURA version": olts. changed the each in is can string the elements active in passed current data
TERRESTRIAL screen model status" switch serial that kbps, configuration of of "IP information" you module on the the of module
after table at settings" appears module: number can the time, from of a processor streaming control between table for given TION the pressing device. logout software all last synchronized hardware module. the tab. screens when moment. screen interface. table of DVB-S2BROADCASTING power-up the the following from load interface. the all dif version module. the you version module ferent in "Change" module is The module module percents, or will from parameters restart "System number configuration see number control. errors the button accessed title a TDT of internal main . menu" and the [2] . are
table in and menu module. comments the menus. displayed temperature contains tab login of "Device tabs the contains information The input [1]. at how the information" tab real in several stream. "Main" to highlighted degrees time: eliminate strings window submenu. input Local table. of these [3]. in bit Celsius, time , yellow rate The Pressing which errors of fset in module shows power kbps, gives 61 can are on DVB-S2/T2/C to IP STREAMERS MVDS parameter RF “Modulation "PLP with transponder When "Input Can "Input RF "Preamplifier and "Modulation parameters: The “Symbol “Frequency” "Polarisation" Possible protocol “Satellite” calculation. “Satellite”, When For switched value 13V is If to “LNB converter frequency "LNB converter frequency "LNB of The RF The time services, module), table This Input settings “Auto” choosen “Of following preamplifier input "DVB-C" preamplifier "RF "RF "RF multi V example: be status screen
TROPHY f”, number”is voltage” HI LO F=(950+LNB ertical; is frequency" bandwidth" the power selected “Auto”, is frequency" is input" input" input" used rate” commands: frequency" ON table . . PLP terrestrial available tuner – selected, in in present. "Polarisation" is according of parameters: DISEQC standard" consists standard" in megahertz. megahertz. - displayed. if and modulation power" the - the
- – supply modulation, the to
table table table kilohertz. LNB the “13V”, the TERRESTRIAL . is power displayed from input “LNB is frequency - locked configure - “Frequency” symbol the polarisation the Hi+2150+LNB in - power or for for is switched - Hi=10,600, the - “None”, values to of the command “18V”, of the used dif frequency supply section. - bandwidth cable set Hi sti410C sdi410C, Enter used set three LNB Use Use ferent to the rows standards. LNB freq.” input in rate to supply the the polarisation to of parameters the “13V/22kHz”, 8 10600 9750 converter DVB-C, to transponder local “SA the of switch local tables: MHz are additional the of DVB-T2 of according of of DVB-S2BROADCASTING is module select transponder the "RF is f; sda410C of LNB the T value converter the selected. of voltage satellite disabled Lo)/2, oscillator
MHz used A”, instead the oscillator and converter MHz DVB-T/T2 input" on/of satellite satellite the "RF from “SA Lo=9750, terrestrial in transponder consists – 7 is for to parameter the corresponding for 18V kilo MHZ. "Preamplifier the of f T input", transponder (sti410C “18V/22kHz”. set module table. select the . the the
and of B”, Can the upper the 22 is lower transponder input symbols exceeds – Horizontal, power universal to "DVB-T/T2" the transponder displayed. “SA can kHz converter the universal of be When or "List the value then signal consists following T "Input "LNB cable be "Horizontal" signal module).
C”, for satellite per the set of in power" the F=(950+10,600+2150+9750)/2=1 “SA dif the to of services" LO megahertz. in second. In is bandwidth" ferent . module. T the kilo frequency" the
D”. In when parameter symbols input or the "Input from "V and the "List ertical". satellite parameter "Auto" status" "Input switch value per of is services" hidden second. is status". - that table transponder used "LNB the supports and you for table The HI "Symbol power IF can 1,725 frequency", "RF frequency the (sdi410C DISEQC see for input" list MHz. rate” 62 real the of DVB-S2/T2/C to IP STREAMERS MVDS service several module. The installed, the Click descrambling identifier). The List ofservicestable “Input displayed. If “PER” shall signal “VBER” “SNR” in
“Guard “FEC” signal “Modulation QPSK,QAM16,QAM32,QAM64,QAM128,QAM256 QPSK, Possible “Modulation” or “Frequency” DVB-T Possible “Modulation with The “Input streamer “Lock The Input statustable “Symbol kilo the RF control following the values table checkboxes not on TROPHY frequency symbols status” bitrate” level” number without (sti410C – – , – 8PSK interval” is DVB-T2, input services. – forward the ratio RF exceed values values Several rate” downloadable module not bit shows Packet interface. Also signal/noise "W of - mode” standard” error – of – descrambled. RF signal. ”Locked” (sdi410C, information – by any – intermediate the atch" per modulation of
only). the bitrate TERRESTRIAL the – of of error (sti410C) 2Е-4. signal DVB-C CA UDP has The guard in rate error services all counters errors the the following second MPEG – symbol
module button the Maximum OFDM of V correction. not modulation standard:
after of "Descrambling – alues: - level unicast packet sda410C); interval from the detected the (sti410C). ration the at "Descramble" synchronised is at transport (sdi410C scheme the to V rate can are frequency displayed streamer modulation input parameters input can at the iterbi http://www 8k see output at the reset is output of DVB-S2BROADCASTING of module DVB-S, be or streaming be the standard signal. selected scheme: the equal transport corrector OFDM module 2k. of selected selected, error only). input during of the satellite module in status" (sdi410C, bitrate with column the .videolan.org mode the input. DVB-S2 are to input packets signal of input. channel. of . tuner RF table zero, the via stream T module. and displayed the of o icon has transponder if of signal. input get input the (sti410C are the the Level the sda410C) , descrambling input (sdi410C); “Input to VBER the synchronised meanings: the UDP The the (sti410C). input services, used module parameters control signal. opposite indication signal. only status”. whole module
unicast only). to if supports select interface number the - including status service value will with – update. is streamer approximate. 8 start services Mbps. the observed. to of simultaneous can is dif packets. input an whole descrambled ferent VLC UDP module be for signal; number Media started,
unicast descrambling details has "Unlocked” descrambling Player successfully synchronised streaming of (type, services packets must name, by – 63 the CA via for be , of is -
DVB-S2/T2/C to IP STREAMERS MVDS one 255 "T to selectthevalueofseven packets. packet. Canbeselectedfromonetoseven. It isrecommended "TS packetcount"-countoftheMPEG2 speed foritsprojectioninrealtime. extra datafieldssothattheflowisserved atthecorrect oriented andisparticularlyusefulforstreaming. R R "Protocol" -thedropdownmenuof output streams. This tableisusedspecifycommonstreaming parameterstoall Streaming settingstable SAP/SDP The The This Output "Descramble" Unnecessary service PID, The This appear: Press “+”theiconatstartoflistservicesline. Detailed serviceinformation TP/UDP ime unit. is following "Streaming screen table "SAP/SDP types TROPHY T entered o settings line, The Live" . UDP
channel. is and consists used stream all service checkboxes streams in -
isatransportprotocolwhichnotconnection
TERRESTRIAL This tableconsistsoffollowinglines: a PID-s settings" settings" this streams parameter to The
will see of box. information of can "Output three be detailed service table Each of of rejected table be streams. used tables: this deselected is DVB-S2BROADCASTING streams" time is is streams, service used service to fers twooptions:UDP by shown used that "Streaming restrict Close any specify table an TS packetsintheUDP information to router are in from PCR IP the the configure the
is stream common included “+” used stream settings", the when PID. table: TP/UDP table descrambling and to After passes the service the individually multicasting The detailedserviceinformationtablewill by streaming in and TTL select "SAP/SDP adds clicking checking a announcement
through value descrambling title,
individual on list parameters configure service is range.
settings" the the reduced a by router icon. "Descramble" unchecking streams provider A and
list the number , and to the to output zero. of service all TTL "Output for , the service output between corresponding descrambling.
is streams. checkbox CA reduced description streams".
streams. ID, module. 1 PMT and 64 by of
DVB-S2/T2/C to IP STREAMERS MVDS Once per enabled, querier and snooping when "Send set be "Count 5 4 3 2 1 QoS switches options "QoS" channel on assigned S " equipment changed SAP/SDP "IP transmitted "Username" refresh. t i "Sending transmit "Enable" an and description a This SAP/SDP - - - - - n r G T Best V Low High selected a A n to t one op e ideo generate n r EPG
P values: n "Update" o r s input address" the SDP v the / IGMP - o priority m u TROPHY table S of priority a ef the Ethernet priority quality relate p u i l and D or the t , dif fort output
type support. t configuration
n the
streaming e P are - stream n only i to
routers period" tables settingstable ferent c n d from check messages.
a use module query voice
(best on is e g program IGMP SAP/SDP m the - program to s two p video m r of video the to e r - o e when used the streams"
o dif switch. one c the TERRESTRIAL u e s Service. multicast output g data o are count protocols the In " ef p save name that n ferent messages" r - n
SAP/SDP a s queries. fort t d acts introduce - priority order to m
output
s your box not to guide. w values a are m t , guide. data. twenty
It
h made value. h n streams. channel. the entered e address. a e configure as o - is created The if s d t QoS
for count s
IP
address for you
n need the e that w The g of SAP/SDP
s
a have
channel. receiving u IGMP h to drop five. - the e m creating c i i management module d multicast c enable wish a correctly r DVB-S2BROADCASTING of tables e you will h e n v to Click and s
SAP time been After
output i down
t w the
c b h snooping be be o of to wish i e e e l f l snooping
of created updating is entered, deliver router list the streams, to connected of assign capable. IGMP to fers . for It the will function, click ot is snooping five displayed
the query video suf not to on to dif the ficient FR work. "Update" the ferentiated data a messages input streaming multicast are in menageable to When and the enable parameters associated to the "Output conclude service the transmitting. router packets associated the IGMP Ethernet IGMP streams" with must this options the on
query count the
query streaming exist their audio Enable querier or swith table messages is Dif on routes in data) automatically fserv this one the bellow with . settings. Without function network through module . These IGMP . send Can 65 a
DVB-S2/T2/C to IP STREAMERS MVDS options For Advanced connected, transport "Output "Service "IP 224.0.0.0 "IP "Enable" The This Output
port" address" advanced description table TROPHY related streams bitrate" - title" - stream the is to enable output all used 239.255.255.255, - IP - output the select users, to
port of -
can table TERRESTRIAL current the to streaming the multicast settings individually required be output bitrates the table the enabled. output service possibility columns. services. address of for will service. but configure bitrate the be DVB-S2BROADCASTING from it zero. stream is required exists T available o of recommended open T stream the o to confirm of output be this for opening input added. in the table, kbps. streams. the stream services. to configuration, click The an reduce When additional default on to In be the the it the from added. icon streaming value second click table 224.0.1.0 “+” is The on 1234. next with line the Ethernet available to further "Update" sending to the 238.255.255.255. service interface range configuration of button. the title. is entire is from not 66 DVB-S2/T2/C to IP STREAMERS MVDS displayed. be ethernet IP This
the remain broadcast Within table. "New default device "New subscriber's "SAP/SDP The "SAP/SDP descrambled descramble "Include "Include The IP
settings parameters", set. "Update" group description screen service service TROPHY supports name. the so In EPG connection CA until for will
the gruop" "Enable" channel (Figure set-top
output button provider" by eath informantion" title" information" Also have this IP of the SAP/SDP
"T
TERRESTRIAL status the - service this configuration ime - select been service and inserted box 21) the parameters number" checkboxes table name - parameters" close consists or name enter previously table from
reproducer (the protocol. rows: - - at CA check will check the the the given - the current video
module. is be enter of of DVB-S2BROADCASTING advanced provider IP altered. drop next this both four used created The
to and this PID receiving , if the the status to down tables: to the interfaces. as name "IP cannot include to name When service the order the device settings through
include status". menu of that output side. stream "Control of be you EPG
number both supports the on the In the disabled). table the Leave have The all the service the output infomation PIDs SAP service Ethernet SAP/SDP interface conditional by subscriber's time IP made you this
SAP clicking
group parameters stream. is name. By parameters has want possible checkbox .
your interfaces IP from
default, settings to on
parameters", on which This to selection, access the the set-top the assign tables to all name input input table. unchecked “-“ table you and select the icon. information box want stream. confirm transport to will PIDs are a total "Streaming local or the the be used to reproducer are output when used link service it time streams by stream selected to required the clicking in of service configure bitrate interface the fset service. on , to is if SDT and can 67 the the the on be to is is
DVB-S2/T2/C to IP STREAMERS MVDS Note: streaming the It "Gateway" "Subnet the "IP "MAC The start menu, Click corresponding the example, information "Initialised" O i in displayed. i In the The been option of error CAM module m This CAM n n is t f o s f
Address" h the module range o this n e the description inserted e possible r menu content i r screen menu. for m t Address" r can inserted. t settings on o TROPHY v restart e "Status" if r a click i mask" d CA " s menu". security t inactivated , the of " i e
interface be above o
- , from "
When n for local a
C enter consists CA and module - read of
t n on enabled. "Back" A h enter to function a d -
e - of the a band
b enter
the module. In line m the
TERRESTRIAL the reasons network "CA control o r remaining the the " particular there e o the u from S remaining checkbox m Internet. d the t physical t conditional is
button "Home"
u a "IP to of module IP a the information i "CA l t It n e i u
a in n
IP three access no s address
the is s parameters" i the local addresses. e WEB message: i n
" n
case address module
r recommended g CA f t to o c
e CAM. lines CA address module r o to tables: menu" button l d tables m
network i return n module n control
dif enable
a t access e of DVB-S2BROADCASTING C a of module. t s ferent i i A are table o monitor" n
that this descrambing Click
n s a "No table depends "CA to " m to
of tables r via
from e m filled mask. this insterted, o gateway a you return the card previous
options.
d n e general module module e on streaming d shows u s to As m function.
s module's streaming l table wish e rows. with a turn " p has the
C g an on t to i y A e s . .
This to with "Host accessing "TRAP traps enable by "Enable TRAP" write "W to Community" and password "Read rows. The table. This SNMP assign ethernet interface. streamer information interface rite agents SNMP description one access menu when IP settings Community"
Community" TRAP to Community"
#1","Host the or that on of network
the managers, parameters. schould tab Check to TRAPS. password more
a module. generation. is diagnostic streamer is managed - contains of only shared SNMP card the - IP SNMP the be - is required -
community This where #2" the is disabled. "SNMP is is
enable parameters. traps by used message device. displayed the
The the password - address managers. multiple IP TRAPS if SNMP are
for password streamer configuration" addresses you WEB Check read-only name alerts occurs. automatically want must
SNMP used will configuration control The this be generated generates acts to fall used for of
send. access access agents "Read box within hosts read- table from as 68 for . to a DVB-S2/T2/C to IP STREAMERS MVDS "save you on configuration All Export setting Local is 2000:01:01 blue Events module. app parameters", Event "Language". Move This System decoded the of This to background, menu TROPHY the file the time logs System select corresponding in parameters enables menu to the mouse data of too, disk" and tab fset log the data "Firmware menu established and
you TERRESTRIAL time e option. on action contains in are saved error to the the the tab to see sorted "Logs values 00.00.00. log System for messages then a on upgrade", list following the is on filtering" an by click used of of the data appropriate time DVB-S2BROADCASTING menu the these When on streamer from log are file – checkboxes. "User the submenu the tab parameter messages in for the the "Export newest then red. the file management", MPEG time module click current can After of items: parameters" are are parameters the stream be on switching in corrected. can module. restored the streamer the "Event be "Event is beginning. "Restore received, saved Log table. line. on on logs", configuration. logs" contents streamer A the
onto Y window ou Information defaults", unit, the "Export line. can a remains information backup The the module. is filter displayed Y parameters", current event ou "Reset after events required need file. Move the logs about date Inversely which are the to power the screen messages select shown date is device", "Import mouse allows loss set , and 69 the the will to of in DVB-S2/T2/C to IP STREAMERS MVDS in Click shows If Firmware screen. on Click Select thisoptionin"Systemmenu"tab. Import parameters you the the on on box, wish streamer the TROPHY The "Click "Click upgrade firmware click to upload update to to on module.
select TERRESTRIAL select "Upload". confirmation version the file" file" Once streamer's that and and The you the select select window new DVB-S2BROADCASTING have streamer firmware, firmware the the selected will The Importparameterswindowisdisplayed. firmware file be has containing will select displayed. at the be update the file, installed this present click the option file configuration on on from time. in the the "System the "Upload" streamer hard data drive. menu". button . that When The you at the the card wish bottom file displayed to name restore of 70 the is DVB-S2/T2/C to IP STREAMERS MVDS If Language restart. Clicking Reset remains streamer Clicking Restore function. change new and Enter In password field password" This Select User you the password user and window management TROPHY wish the "User the this function unchanged. on on defaults Press new module confirm or will device to option table the the "Update" mamagement" change not username consits in
the "Reset "Restore TERRESTRIAL allows the and take in to the "Remove" "System the the appropriate user ef button of new the you fect streamer's factory defaults" two device" management password to until table menu" to button tables: change DVB-S2BROADCASTING change default you fields, you submenu submenu tab. menu to press "Change retyping can remove the The select settings values. function. language, password. manage the user in in "Modify" desired user the the it password" The of management in "System the "System User from users, the select Control Enter role user button. "Repeat list. role who this for . and menu" the menu" User and "User" user option window new will "User new streaming role tab be tab and password enables in assword" causes "Admin" able is mamagement". resets the press displayed. "System to interfaces the the only login the in enables field. the "Add" streamer configuration password into menu". "New The IP The the the button
parameters password" change module password streamer "Change change to of 71 add the to of . DVB-S2/T2/C to IP STREAMERS MVDS SA TERRESTRIAL LNB control T Input frequencyrange FEC Symbol rate Input resistance Input level Demodulation IP Active antennavoltage Input resistance Input frequencyrange Input level Pilot Signals FEC Guard Interval Demodulation Output Stream rate Standard T Current consumption Supply voltage Control port multicast, MPTS,SPTS Output protocols W Dimensions Specifications emperature range uning step eight TSoutput T mode(SDI-410C) TROPHY TS quantity
TERRESTRIAL mode(STI- 36x198x107.5 0° 0.84 kg 12
UDP/R up to24 до 100Mbps IEE802.3 10/100Base-T +12V 75 Ohm 47MHz 30 dBuV PP1-PP8 ½, 3/5,2/3,¾,4/5,5/6 1/128, 1/32,1/16,19/256,1/8,19/128,1/4 2K, 4K,8K,16K,32Kmodes OFDM 410C) 0/14/18 V 1 MHz 950...2150 MHz 1/2_3/5_2/3_3/4_4/5_5/6_8/9_9/10 (8PSK) 1/2_2/3_3/4_5/6_6/7_7/8 (QPSK) 2… 37Msymb/s(8PSK) 2...45 Мsymb/s(QPSK) 75 Ohm 45…85 dBuV QPSK, 8PSK Standard Y 0.2 es ÷ V DVB-S2BROADCASTING A +50°C ± , upto100mA
(without 1 TP … V … , 300mA
862MHz IEE802.3 80 external mm
dBuV max,DiSEqC1.0
10/100 load and Base-T CAM-module);
0.4A
with CAM 72 KU-BAND BLOCK UP CONVERTER 2W KU-BANDBLOCK-UP-CONVER MVDS The BUC Output interface Input interface Interfaces W Operation temperature Dimensions, mm Input impedance T Power supplyvoltage Current comsumption Output power Nonuniformity ofthegain L.O. temperatureinstability L.O. 10 Gain
L.O. frequency
Output frequencyrange Input frequencyrange Specifications TROPHY ypical inputsignallevel eight convertsa950...1750
MH
TERRESTRIAL z level
DVB-S2BROADCASTING
MH TER (BUC) z rangesignaltothe10,9...1
WR N-type 1,2 kg 181,4 x106,750 50 Ohm -40 …+55C 70dB 2W (33dBm) +18 …+24V 1,4 -5 …+5dBm 55.0 dB(typical) 1.0 dB 2*10-6 10750,00 9750,00 1 10700 …1 950 …1750 1700 …12500 A 75G MH MH 1500 z (V MH z (V 1,7 z MH MH GH ariant ariant B) z (V z (V z or1 A ariant B) ariant ) 1,7...12,5 A) GH z range 73 KU-BAND BLOCK UP CONVERTER 4W KU-BANDBLOCK-UP-CONVER MVDS The - - - PowerConsumption:35WMax; - SmallSize&Mass; - RoHSCompliant; - OptionalInternalReferencesource; - 36dBmoutputpower; MVDS broadcasting; to the10,7...1 - BUCisidealforBroadbandVSA Air Humidity:upto100%; T wo yearsW 4W BUCconvertsa950...1750MHzrangesignal TROPHY 1,5GHz or1 arranty
TERRESTRIAL . 1,7...12,5 GHzrange. M 5
d F e - F p e t h m 7 a DVB-S2BROADCASTING l e T C RFterminalsand o n TER (BUC) n e c t o r
4 W - M R - 4 7
5 d e p t h 7 74 KU-BAND BLOCK UP CONVERTER MVDS Output interface Input interface Interfaces Dimensions, mm/W Operation temperature Input impedance Power comsumption T Operating voltage 10 Output power
Phase Noise
Spurious Nonuniformity ofthegain Frequency Sense Linear Gain
L.O. frequency
Input frequencyrange Specifications Output frequencyrange TROPHY ypical inputsignallevel MH z ExternalReferencelevel
TERRESTRIAL
eight, kg DVB-S2BROADCASTING
100kHz 10kHz 1kHz 100Hz Out ofband In band
WR F-connector orN-type 176,1 x161,565/1,8 75 Ohm;50 -40 …+55 70dB/uV +15 …+24VDC 35W 4W (36dBmmin1dBCompressionPoint) -90dBc/Hz -5 …+5dBm -80dBc/Hz -70dBc/Hz -60dBc/Hz -50dBc -60dBc Non-inverted 58.0 dB(typical) 1.0 dB 10750,00 9750,00 1 950 …1750 10700 …1 1700 …12500 75G MH MH 1500 ° C z (V MH z (V z MH MH ariant ariant B)
z (V z (V A ariant B) ariant ) A) 75 OMNIDIRECTIONAL SLOT ANTENNA MVDS OMNIDIRECTIONAL Antenna isusedliketransmitoutdoorantennaforterrestrialKu-bandbroadcasting. T W T VSWR inoperationband Elevation planeBeamwidth Gain Signal polarization V V Operation band Specifications ipe ofperformance ipe offlange ariant B ariant eight TROPHY A
TERRESTRIAL
SLOT
ANTENNA Azimuth =0 DVB-S2BROADCASTING Elevation /Degreevs.dBi 10,75...1 1 W 2 kg WR75G No morethan1,6 8,3 degrees 12,3 dBimax Horizontal 1,7...12,5 GHz aterproof 1,5 GHz Azimuth =180 Azimuth /Degreevs.dBi 76 ATD-54 S2 to S2 TRANSMODULATOR MVDS Part No.4001-4004 T DVB-S/S2 toDVB-S2 A ransmodulator TD-54 TROPHY
TERRESTRIAL DVB-S2BROADCASTING A L-band output TD -54 S/S2toS2 L-band Input error Loop input Fault T ransmodulator Lock DC RS-485 +
77 USB ATD-54 S2 to S2 TRANSMODULATOR MVDS levels customers r A transmodulators. Remote Access Ÿ Ÿ Ÿ Ÿ Ÿ descrambler Ÿ Ÿ MAIN for into A transponder Attention! repeater (BUC). Ÿ Ÿ Ÿ The DVB-S2 A GENERAL e TD-54-S/S2 TD-54-S/S2
high-performance q network has highperformanceandreliability supports ControlandSet-UpviaUSBRS-485interfaces; supports allPIDsofinputservices; provides transportStreamratesupto94Mbit/s; provides covers modulates descrambles
the receives&demodulates u L-band A i r TD-54-S/S2 e TROPHY FUNCTIONS and excellent d As
designed signal the lowest Symbol t a INFORMA o management with range . result,
all (optionally). But full new to p to becomes
e output all TERRESTRIAL input Controller L-Band output r a phase
f to DVB-S2 for DVB-S2 o (950 TROPHY
rate the r best OF FPGA m DVB-S2 DVB-S2 applications TION
maximum signal. channels A symbol ... of noise. h range TD-54-S/S2 the Software in i is g 2150MHz). output
DVB-S transponder does TRANSMODULA provides h -ACCESS optional, same class
TRANSMODULA
TRANSMODULA q (900...2150 rate DVB-S2BROADCASTING u the MER a to transponder over or as license l performance, i must t y analogue DVB-S2 a WEB to that
using A channels satellite value .
single m to high-speed DVB-S2 not o of transmit to d MHz) monitoring the a u enable exceed T for transponder; l a OR special TV or carrier must T t base i T the (optionally); o OR: TRANSMODULA OR and MVDS n providing modulation is in
new TROPHY digital→analogue more station be a satellite b , of Remote a of
brand with fers s equal integrates in carrier e the than d full
bit signal. a built-in input -ACCESS transmitter o new and compliance rate n to Access 20% high is
or restored. T T the parameters from1 transmodulator R O value the bigger SNR O support R: freely converter P Controller descrambler H or CycloneV Mbps of with Y MVDS value, The
than input adjustable e for DVB-S2 x up of form p (DAC) symbol e symbol the (see to Block TROPHY r excellent from t i 94 core s and solution; e transmodulator/ . page Mbps; up-conversion standard.
is UP DVB-S/S2 quality rate. rate I responsible t technology
-ACCESS Converter p shoulder 16). of r o of v input i The 78 d the
e
to s
ATD-54 S2 to S2 TRANSMODULATOR MVDS (transmodulators). Access modulation enables gives A TD-54 an TROPHY S/S2 L-band A ef TD Controller L-band output full Loop input -54 S/S2toS2 L-band Input error Loop input ficient Fault parameters, RS-485 configuration USB to T ransmodulator Lock S2 DC RS-485 TERRESTRIAL + USB transmission A TRANSMODULA L-band output TD demodulator -54 S/S2toS2 provides L-band Input error Loop input DVB-S/S2 Fault T uner& T control ransmodulator Lock
DC RS-485 of + USB A the TD in
L-band output WEB -54 S/S2toS2 L-band Input error Loop input of DVB-S2BROADCASTING QPSK Fault transmodulator the T ransmodulator T Lock
DC RS-485 monitoring OR + USB mute/unmute and A TD
L-band output -54 S/S2toS2 provides L-band Input error Loop input Fault 8PSK T ransmodulator Lock DC RS-485 +
USB , of modes. a including A L-band output TD -54 S/S2toS2 conditions L-band Input error high Loop input the Fault T ransmodulator performance The input Lock DC RS-485 + USB signal A TD descrambler L-band output USB -54 S/S2toS2 L-band Input error for Loop input TROPHY Oscillator ACCESS Oscillator parameters Fault L-band 10MHz Local Local the T ransmodulator interface input Lock DC RS-485 + RF
USB channel - A L-band output TD -54 S/S2toS2 L-band Input error Loop input management, output Fault ensures T of ransmodulator spectrum. Lock DC RS-485 + the USB signal. 10MHz ref.+24VDC 5 7 1 3 L-band output L-band inputs ease transmodulator 2 8 6 4 The selection This
DVB-S2 QPSK/8PSK of
90-264VAC 50/60Hz L-band 8-ch combiner use modulator Remote results 79 and of ATD-54 S2 to S2 TRANSMODULATOR MVDS In signal signal Experience THE TRANSMODULA addition, Carrier Recovery Retransmitter MAIN like apartof characteristics receiving/transmission. TROPHY possible of APPLICA MVDS
TERRESTRIAL to T terrestrial (MER, TION OR form carriers Input a OF VBER, new 10MHz ref.+24VDC This 5 7 1 3 L-band output broadcasting DVB-S2 L-band inputs 2 8 6 4 DVB-S2BROADCASTING frequency fully CBER,
90-264VAC 50/60Hz L-band 8-ch combiner A L-band output TD restored -54 S/S2toS2T L-band Input error to Loop input Fault DVB-S2 ransmodulator C/N Lock grid,
DC RS-485 shows + USB A TD L-band output etc.), -54 S/S2toS2T L-band Input error signal Loop input if Fault necessary TRANSMODULA ransmodulator that Lock DC RS-485 which + USB parameters. A TD L-band output DVB-S2 -54 S/S2toS2T L-band Input error Loop input Fault is ransmodulator Lock . transmitted DC RS-485 + USB A L-band output TD carrier -54 S/S2toS2T L-band Input error Loop input Fault The ransmodulator T Output recoveredcarriers Lock + 10MHzL.O.(optional)
DC RS-485 ORS + USB must output A L-band output TD from -54 S/S2toS2T L-band Input error Loop input Fault ransmodulator be Lock DC RS-485 the signal + USB restored A L-band output TD -54 S/S2toS2T Head-End. L-band Input error Loop input Fault ransmodulator coincides Lock DC RS-485 + USB after
Ethernet
USB 12VDC RS-485 OUT a with second 200-240VAC 50/60Hz Remote Access Controller 80 the ATD-54 S2 to S2 TRANSMODULATOR MVDS FUNCTIONAL A L-band output TD -54 S/S2toS2 L-band Input error TROPHY Loop input Fault ELEMENTS T
ransmodulator TERRESTRIAL Lock DC RS-485 + USB DVB-S2BROADCASTING Explanation ofthefunctionalelements PowerLED(green) Lock LED(green) Fault LED(red) Blinking frequently Blinking slowly Light constantly Input errorLED(red) Input L-bandsignal/Loop USB control RS-485 control(optional)
L-band +10MHzref.output +12V DC/2A
+ A B
DefaultconfigurationorConfigureerror
Power ON/OFF Input signallock
Boot processorHardW Data overflow Input signalerrors 2xF-connectors (V Screw connector N-type connector Screw connector irtual COM-port)Micro-USB
:
are error
81 ATD-54 S2 to S2 TRANSMODULATOR MVDS the followingconfigurations/deviceversions: Depending ontheapplication,devicearepre-configuredbyhardware.Deliveries madewith associated the All parameters signal configurable The GENERAL particular The connected. All regulations When technician. The executing When SAFETY INST input assembly N-type provisions
devices ALLING device can components TROPHY assembling PIDs
TROPHY 10
INSTRUCTIONS , the DIN
DESCRIPTION services are be MHz can is connector by , are AND OPERA inserts settings, DVB-S/S2 EN installation observed. broadcast of Features be USB,
reference TERRESTRIAL not DIN 60728-1 -ACCESS embeddeddescrambler varied which and are into to . RS-485 always EN The be the being to commissioning within contains 1 50083 into embedded TING INSTRUCTIONS and OF DVB-S2 assembled regarding output output
follow FUNCTIONS or MVDS wide installed cable DVB-S2BROADCASTING must WEB into DVB-S2 the transmodulator signal limits. safety connection network. be input interfaces accompanying and in the observed
contains carrier areas may signal brought A TD-54-S/S2 Using on PartNo. (additional with (P where must . no at The + A into all T instructions all account maximum , the PMT the output take use times reception 4001 4002 integrated to , tables Remote SDT by place be signal when DVB-S2 anybody bit
ignored. , exactly TDT necessary rate is when Access working are user important,
etc). of
TRANSMODULA . provided A 94 who 4003 TD
L-band output no -54 S/S2toS2 interface, L-band Input error Loop input Controller Mbps with Fault + to electricity is T ransmodulator not ensure the via the
4004 and
Lock DC RS-485 RF-output + an equipment. the
USB program transmits + option). authorised has that T operating OR been EMC The and and and via 82 In ATD-54 S2 to S2 TRANSMODULATOR MVDS Command Ÿ Ÿ Ÿ Ÿ Ÿ USB Picocom Get USB HyperT terminal In specification T MANAGEMENT ransmodulator order flow stop parity data bits T serial T erminal TROPHY erminal per control...... none. bit...... 1; bits...... 8; erminal ...... none; program to
for second...... 1 port “Help” be Linux is
for able
for CDC settings:
for TERRESTRIAL BY iOS equipped indicates Android on Windows to USB-INTERF (Communication your configure 15200; computer all by available Micro DVB-S2BROADCASTING the T ACE , for ransmodulator Device USB commands example: connector Class). for configuration T ransmodulator for V irtual on COM-port the parameters SERIAL interface.
managing. connection The protocol use 83 any ATD-54 S2 to S2 TRANSMODULATOR MVDS “rxfreq “rxfreq” commandindicateIntermediateFrequency(IF)ofreceivingsignal. 45000kSymb/s. “rxsr “rxsr” commandindicateSymbolRate(SR)ofreceivingsignal. “lnb “lnb” commandindicatevoltageand22kHzmeanderofinputLNB. ˽ ˽ X” commandchangescurrentLNBmode.“X”mustbefrom0to4,seebelow XXXXX” commandchangescurrentSR.“XXXXX”mustbefrom1000kSymb/sto TROPHY ˽ XXXX” commandchangescurrentIF
TERRESTRIAL DVB-S2BROADCASTING . “XXXX”mustbefrom900MHzto2150MHz. . 84 ATD-54 S2 to S2 TRANSMODULATOR MVDS “txrollof “txrollof Output SymbolRatemustnotexceedmorethan20%valueofinputRate. transponder Attention! SymbolRateofoutputtranspondermustbeequaltoorbiggerthan ofinput 35000kSymb/s. “txfreq “txfreq” commandindicatefrequencyoftransmittingsignal. “txsr “txsr” commandindicateSymbolRate(SR)oftransmittingsignal. ˽ TROPHY XXXXX” commandchangescurrentoutputSR.“XXXXX”mustbefrom01000kSymb/sto ˽ f f” commandindicateoutputcarrierRollOf XXXX” commandchangescurrentfrequency ˽ X.XX” commandchangescurrentRollOf .
TERRESTRIAL DVB-S2BROADCASTING f. f. “X.XX”mutbe0.2or0.250.35. . “XXXX”mustbefrom900MHzto2150MHz. 85 ATD-54 S2 to S2 TRANSMODULATOR MVDS “txatt “txatt” commandindicateattenuationoftransmitting signal. “Show Front panel“F below “txmod “txmod” commandindicatemodulationparametersoftransmittingsignal. ˽ XX.X” commandchangescurrentattenuation ofsignallevel.“XX.X”mustbefrom0to31.5. . TROPHY ˽ ˽ state” commandindicatecommonstateoftransmodulatorandoverflowdata. XX” commandchangescurrentparametersofmodulation.“XX”mustbefrom1to16,see AUL
TERRESTRIAL T” LEDwillconstantlylightingifoverflowtakeplace. DVB-S2BROADCASTING 86 ATD-54 S2 to S2 TRANSMODULATOR MVDS “txref “txref” commandindicate10MHzLocalOscillatoron/of into outputcarrier Embedded combiner(optionalforPartNo.4003,4005,4006,4008)injects10MHzreferencesignal “show config”commandindicatecurrentconfiguranionoftransmodulator ˽ on” and“txref TROPHY
TERRESTRIAL . ˽ of f” commandsturnon/of DVB-S2BROADCASTING port. “XXX”mustbefrom1to255. “rs485addr “rs485addr” commandindicatenumberofRS-485port. f 10MHzLocalOscillator f mode. ˽ XXX” commandchangescurrentnumberof . L-band output . Oscillator Combiner 10MHz Local +10MHz L-band output 87 ATD-54 S2 to S2 TRANSMODULATOR MVDS Ÿ Ÿ Ÿ Ÿ Ÿ Ÿ Ÿ Ÿ “show state”commandindicatecommonstateof “show ver”commandindicateHardW Overflow ofdata CPU temperature Output SymbolRateanddatarate Input SymbolRateanddatarate(iftunerisLOCK) Mode ofinputcarrier Input signalS/Nratio Input signalLEVEL Input signalLOCK/UNLOCK TROPHY
TERRESTRIAL DVB-S2BROADCASTING are andSoftW T ransmodulator: are versionsofdevice. 88 ATD-54 S2 to S2 TRANSMODULATOR MVDS Physical Symbol ratestep Output Symbolrate DVB-S2 Modulation Attenuation range SNR 10 MHzLocalOscillator(optional) Connector L-Band RF Output Connectors LNB control Input Symbolrate L-band RF Input Descrambler mode WEB-Interface /RS-485 USB V Control&Monitoring DVB-S2 Carrier ID Standards SPECIFICA TROPHY irtual COM-port TIONS
TERRESTRIAL DVB-S2BROADCASTING By REMOTE Micro USB EN 302307 ETSI 103129 13/18V(on/of From 1to45MSymb/s,1KSymb/sstep 900MHz to2150MHz,1MHzstep TROPHY via RS-485BUS 2xF-connectors, 50 12V DC/15W 1KSymb/s 20%) thantheinputSymbolRate From 1to35MSymb/s,equalorhigher(not more 8PSK: 3/5,2/3,3/4,5/6,8/9,9/10 QPSK:1/3, 2/5,1/2,3/5,2/3,3/4,4/5,5/6,8/9, 9/10 0dB to-31.5dB,0.5dBstep > 40dB@0dBm 0...+5dBm, injectedtooutputsignal N-T 900MHz to2150MHz,1MHzstep ype, 50 -ACCESS (additionallicense) Ω f), 22kHz , 1kgW ACCESS CONTROLLERconnected Ω eight, 0°Cto50°C (IN+LOOP) 89 REMOTE ACCESS CONTROLLER MVDS & 12VDC/12A Controller Remote power supply TROPHY
TERRESTRIAL Access
DVB-S2BROADCASTING
Ethernet
USB 12VDC RS-485 OUT
200-240VAC 50/60Hz Remote Access Controller 90 MVDS TROPHY TERRESTRIAL DVB-S2 BROADCASTING
SAFETY INSTRUCTIONS
When assembling and commissioning the REMOTE ACCESS CONTROLLER and executing the settings, always follow the accompanying instructions exactly. The devices are not to be assembled and brought into use by anybody who is not an authorised technician. Access Controller
When components are being installed in areas where reception is Ethernet important, ensure that EMC regulations are observed. All assembly, installation and cable connection must take place when no Remote electricity has been connected. The provisions of DIN EN 50083 must be observed at all times when working with the equipment. In particular, DIN EN 60728-11 regarding safety may on no account be ignored. USB 50/60Hz AC
NETWORK MANAGEMENT VIA REMOTE ACCESS V RS-485 CONTROLLER 200-240 OUT The Remote Access Controller provides WEB-control and monitoring of 12VDC Transmodulators parameters via Internet. Remote Access Controller connects with Transmodulators by RS485 BUS.
CONFIGURATIONS VIA ETHERNET INTERFACE
If it is necessary to change the basic configuration, the particular HTML user interface must be called up on a computer connected to the device(s). All the settings can be made via Internet Browser. How the user interface works is almost self-explanatory. Any special features of use will be explained in the following chapters. To use all functions of the device by WEB-interface activate Java Script in your browser settings. Network connection to the computer System requirements: - PC/ laptop with 10/100/1000 Mbit Ethernet interface - any Internet browser, capable JAVA script (Google Chrome is recommended). The device has to be connected to PC network using an Ethernet cable. The default IP address of the device is 10.10.10.20. In order to access the WEB interface of the device from a PC, the PC has to be in the 255.255.255.0 subnet. If multiple devices are connected to the same network each device must be set to its own unique IP address to avoid address conflicts. After these settings, the IP address of the PC has to be adjusted to match the network. The Remote Access Controller uses a modern WEB-interface. You can go to the Controller's menu, knowing the IP-address (url) of the device. To gain local access to the Controller, you can connect to it via an Ethernet cable.
ACCESS CONTROLLER In order to connect to the Controller remotely, it is necessary to connect the Controller to the Internet router. You can manage the Controller locally or remotely from a laptop or smartphone.
REMOTE
91 MVDS TROPHY TERRESTRIAL DVB-S2 BROADCASTING
DATA BETWEEN REMOTE ACCESS CONTROLLER AND THE TRANSMODULATORS The industrial RS-485 interface is used as the communication between the Remote Access Controller and Transmodulators. Together with the RS-485 bus an 12VDC bus is laid to the Transmodulators. When a Transmodulator is connected to a data bus you can indicate original number of the RS-485 port by “rs485addr” terminal command (see page 87).
ATD-54 S/S2 to S2 Transmodulator ATD-54 S/S2 to S2 Transmodulator ATD-54 S/S2 to S2 Transmodulator ATD-54 S/S2 to S2 Transmodulator ATD-54 S/S2 to S2 Transmodulator ATD-54 S/S2 to S2 Transmodulator L-band inputs
1 2 Access Controller Loop Loop Loop Loop Loop Loop Ethernet
3 4 L-band 8-ch combiner Remote USB USB USB USB USB USB
L-band L-band L-band L-band L-band L-band 5 6 input input input input input input
Input error Lock Input error Lock Input error Lock Input error Lock Input error Lock Input error Lock 7 8 Fault Fault Fault Fault Fault Fault USB B 50/60Hz 50/60Hz AC V AC RS-485 RS-485 RS-485 RS-485 RS-485 RS-485 RS-485 A
64V L-band output + L-band output + L-band output + L-band output + L-band output + L-band output + DC DC DC DC DC DC 200-240 OUT 90-2 L-band output 12VDC 10MHz ref. +24VDC
LAN Wi-Fi router
RS-485 COMMUNICATION LINE RS-485 (English Recommended Standard 485), the physical layer standard for the asynchronous interface. Regulates the electrical parameters of a half-duplex multi-drop differential link of the "common bus" type. In the RS-485 standard, one twisted pair of wires is used to transmit and receive data, sometimes accompanied by a shield braid or a common wire. Data transmission is carried out using differential signals. The voltage difference between conductors of the same polarity means a logical unit, the difference of the other polarity is zero. The basis of the RS-485 interface is the principle of differential (balanced) data transmission. Its essence lies in the transmission of one signal over two wires. And, on one wire (conditionally A) there is an original signal, and on another (conditionally B) - its inverse copy. In other words, if there is "1" on one wire, then "0" on the other and vice versa. Thus, there is always a potential difference between the two wires of the twisted pair: at "1" it is positive, at "0" - negative. It is this potential difference that the signal is transmitted. Such a transmission method provides high resistance to common mode interference.
А В А В А В А В А В А В А В
Transmod 001 Transmod 002 Transmod 003 Transmod 004 Remote Access Controller AC Transmod 005 Transmod 006 UPS & 12VDC/12A PSU ACCESS CONTROLLER +12V +12V +12V +12V +12V +12V 220V +12V REMOTE
92 MVDS TROPHY TERRESTRIAL DVB-S2 BROADCASTING
SSH ACCESS
The REMOTE ACCESS CONTROLLER uses the Linux Debian OS. Install the terminal program (PuTTY for Windows) on your computer for setup the REMOTE ACCESS CONTROLLER configuration on the SSH connection . IP address by default: 10.10.10.20 Protocol: SSH Login: dvb Password: atdcontrol
It is mandatory to change the root password for confidential !
Use your favorite editor for edit the file /etc/tmod_ctrl.conf
serial port: /dev/ttyS1 port: 80 #http port address : 1,2,3,4,24 #transmodulators addresses delimited by commas username: admin password: 0e7138b4f83fb2ce806c4ed9642511ad
Ÿ Serial port. /dev/ttyS1 is serial port by default; Ÿ HTTP port. 80 is http port by default; Ÿ Address. You can indicate original numbers of RS-485 ports of your Transmodulators (see page 87, “rs485addr˽XXX” command); Ÿ Username. WEB-interface username. Change the login and password for confidential ! Ÿ Password. WEB-interface password. The program will automatically scramble password after restarting of this service. ACCESS CONTROLLER REMOTE
93 MVDS TROPHY TERRESTRIAL DVB-S2 BROADCASTING
MANAGEMENT VIA WEB-INTERFACE
When the IP address for the REMOTE ACCESS CONTROLLER has been entered into the address field of the browser, a connection will be made to the device and the appropriate check-in window will be displayed. Enter your confidential username and password.
TRANSMODULATORS LIST MENU
You can see list of Transmodulators which connects to the RS-485 BUS.
# Number of RS-485 port of Transmodulator
Tuner Current mode (LOCK, UNLOCK, ERRORS) of Transmodulator’s NIM
Rx Freq. Frequency of input DVB-S/S2 transponder, MHz
Signal Level of input signal, dBm
SNR Signal / Noise ratio of input signal
Transm. Common state of Transmodulator (OK, FAULT)
Tx Freq. Frequency of output DVB-S2 transponder, MHZ
Temp Current temperature of chipset, °C
Edit PARAMETERS MENU button ACCESS CONTROLLER REMOTE
94 MVDS TROPHY TERRESTRIAL DVB-S2 BROADCASTING
PARAMETERS MENU
Press EDIT button and manage parameters of Transmodulator.
Input Frequency Frequency of input transponder, 950...2150 MHz
Input Symbol Rate S/R of input transponder, 1...45000 kSpS
LNB Power Mode of LNB control ACCESS CONTROLLER
Output Frequency Frequency of output transponder, 950...2150 MHz REMOTE
95 MVDS TROPHY TERRESTRIAL DVB-S2 BROADCASTING
Output Symbol Rate S/R of output transponder, 1...35000 kSpS
Modulation - FEC Mode of output carrier
Roll-off Roll-off factor, 0,2 ; 0,25 ; 0,35
Output attenuation Attenuation of level of output carrier, 0...-31.5 dB
Reference 10MHz On/off injection of 10MHz ref. signal (Transmodulator Part No. 4003, 4004) ACCESS CONTROLLER REMOTE
96 MVDS TROPHY TERRESTRIAL DVB-S2 BROADCASTING
12VDC SUPPLYING VIA REMOTE ACCESS CONTROLLER
Remote Access Controller has embedded 12VDC/12A power supply unit for supplying up to 6 Transmodulators.
ATD-54 S/S2 to S2 Transmodulator ATD-54 S/S2 to S2 Transmodulator ATD-54 S/S2 to S2 Transmodulator ATD-54 S/S2 to S2 Transmodulator ATD-54 S/S2 to S2 Transmodulator ATD-54 S/S2 to S2 Transmodulator L-band inputs
1 2 Access Controller Loop Loop Loop Loop Loop Loop Ethernet
3 4 L-band 8-ch combiner Remote USB USB USB USB USB USB
L-band L-band L-band L-band L-band L-band 5 6 input input input input input input
Input error Lock Input error Lock Input error Lock Input error Lock Input error Lock Input error Lock
7 8 Fault Fault Fault Fault Fault Fault USB 50/60Hz 50/60Hz AC V AC RS-485 RS-485 RS-485 RS-485 RS-485 RS-485 RS-485
64V L-band output + L-band output + L-band output + L-band output + L-band output + L-band output + DC DC DC DC DC DC 200-240 OUT 90-2 L-band output 12VDC 10MHz ref. +24VDC Access Controller Ethernet
B Remote A USB 50/60Hz AC V RS-485 200-240
+ OUT 12VDC ACCESS CONTROLLER REMOTE
97 MVDS TROPHY TERRESTRIAL DVB-S2 BROADCASTING
SPECIFICATIONS
Control&Monitoring
USB Virtual COM-port Micro USB connector
WEB-Interface 10/100M Ethernet, RJ-45 connector
RS-485 interface 3-pins screw connector
Operating System Linux Debian OS
Hardware spec
CPU Allwinner H3, Quad-core Cortex-A7, 1.2GHz
DDR3 RAM 256MB
Embedded power supply
DC voltage +12VDC, 2-pins screw connector
Power supply rated current (two FANs) 0...12A
Rated power 150W
DC Ripple & Noise (max.) 240mVp-p
Input AC
Voltage 90...264VAC/150W
Power Factor PF>0.95/230VAC PF>0.98/115VAC at full load
Input AC current 1.8A/115VAC 1 A/230VAC
AC frequency range 47...63Hz
Physical
Working temperature 0°C to +70°C
Dimensions 245x132x51mm
Weight 2kg Weight ACCESS CONTROLLER REMOTE
98 8-ch S2 to T/C TRANSMODULATOR MVDS transmodulators 8 DVB-T/C 8 DVB-S/S2to TDQ-480 TDX-480 TROPHY
TERRESTRIAL
DVB-S2BROADCASTING
99 8-ch S2 to T/C TRANSMODULATOR “Last mile”ofMVDSbroadcastingcanbeDigitalCable C/T The sourceofthesignalforasingleapartmentbuildingorgroupbuildingsisDVB-S2toDVB- MVDS
FTA or TROPHY-ACCESS DVB-C/T Mini-Cable Network transmodulators. TROPHY DVB-C NIM TV setwith
TERRESTRIAL DVB-S2BROADCASTING TV DVB-S/S2 8-channel Interface Network Module , builtonclustertechnology Modulator 8-channel DVB-C/T
Output Stage . 100 8-ch S2 to T/C TRANSMODULATOR MVDS screw Ethernet RF Ÿ Ÿ Ÿ Ÿ Ÿ Ÿ Ÿ Ÿ Ÿ Ÿ Ÿ Ÿ Ÿ Characteristics: The T channels tdq480 channels tdx480 using input (Local Information), digital Radio transmodulation c channels The Product description ransmodulators h connectors: robust DIN loop W BISS PMT NIT PSI/SI service PCR TS Integrated a input/output product n eb devices to TROPHY the n processing: terminal
programmes generation reception. Channel rail through
e any control – version – restamping descrambling control l W die-cast and and regeneration and s octal octal filtering or . eb output.
is wall 2x8 T generate eight eight are intended Interface. 8 block and h
RF monitoring - TERRESTRIAL transmodulator transmodulator interface Number), DVB-T e type with mounting can multiswitch housing Devices any
transmodulators distributing DVB-C DVB-T All SNMP d issued for e be F T of service v
ransport NIT for DC (tdx480) i used the c -
monitoring output e RJ-45 output indoor can
from filter entry (Network s configurations
as to at a remultiplex DVB-S2BROADCASTING FT any r - services, - Stream stand power input channels. or e usage channels. with with A
8
d output (Free with Information e DVB-C and alone eight eight s distribution only i Processing g 8 modify output to can n services . devices. e DVB-S/S2 air) DVB-S/S2 DVB-S/S2 (tdq480) d be
or f table), changed o SI bus encrypted r from
of (Service d output i TV g input input input LCN i any t by a or l 1 10 206..214210 9 198..206202 8 190..198194 7 182..190186 6 174..182178 S7 158..166162 S6 150..158154 S5 142..150146 S4 134..142138 S3 126..134130 S2 1 S1 bandII Cablespecial 12 222..230226
S1 1 bandI Cablespecial 5 92..10096 4 84..9288 3 76..8480 S40 462..470466 S39 454..462458 S38 446..454450 S37 438..446442 S36 430..438434 S35 422..430426 S34 414..422418 S33 406..414410 S32 398..406402 S31 390..398394 S30 382..390386 S29 374..382378 S28 366..374370 S27 358..366362 S26 350..358354 S25 342..350346 S24 334..342338 S23 326..334330 S22 318..326322 S21 310..318314 S20 302..310306 specialbandIII UHFHyperband S19 294..302298 S18 286..294290 S17 278..286282 S16 270..278274 S15 262..270266 S14 254..262258 S13 246..254250 S12 238..246242 2 58..6662 1 - 1 214..222218 1 230..238234 VHF VHF VHF bandI 18..126 122 10..1
band
band 18 1
III
II 14 69 68 67 66 65 64 63 62 UHFband 60782...790786 59 58 57 56 55 54 53 52 51 50 49 48 47 46 45 44 43 42 41 40 39 38 37 36
34574...582578 33 32 31 30 29 28 27 26 25502..510506 24494..502 23486..494 22478..486 21470..478 IV 35 61 V Additional 790..798 854..862 846..854 838..846 830..838 834 822..830 826 814..822 818 806..814 798..806 802 774..782 766..774 758..766 762 750..758 742..750 734..742 726..734 730 718..726 710..718 714 702..710 694..702 698 686..694 678..686 682 670..678 674 662..670 654..662 646..654 650 638..646 642 630..638 622..630 614..622 606..614 598..606 602 590..598 594 582..590 566..574 558..566 562 550..558 542..550 534..542 538 526..534 518..526 522 510..518
UHFband UHF band 101
858 850 842 810 778 770 754 746 738 722 706 690 666 658 634 626 618 610
570 554 546 530 514 498 490 482 474 794 586 8-ch S2 to T/C TRANSMODULATOR MVDS Specifications T Current consumption Management port T Symbol Rate FEC Guard Interval Channel bandwidth Modulation MER TS bitrate Level /impedance Channel allocation Frequency range DVB standard RF output LNB control T Input frequencyrange FEC Symbol rate Input resistance Input level Demodulation RF input Dimensions /W emperature range ransmission mode uning step TROPHY 256QAM 128QAM 64QAM 32QAM 16QAM MODULA
TERRESTRIAL eight TION 38,47 33,66Mbit 28,85Mbit
170-230MHz/470-86296-862MHZ OFDM(DVB-T)QAM(DVB-C) 0/14/18 V 1 MHz 950...2150 MHz 1/2_3/5_2/3_3/4_4/5_5/6_8/9_9/10 (8PSK) 1/2_2/3_3/4_5/6_6/7_7/8 (QPSK) 2… 37Msymb/s(8PSK) 2...45 Мsymb/s(QPSK) 75 Ohm 55…95 dBuV QPSK, 8PSK standardIEE802.310/100Base 2K 3.5...7.2Msymb/s 1/2,2/3,3/4,5/6,7/8 1/32,1/16,1/8,1/4 7MHz/8MHz4...8,3MHz QPSK,QAM16,QAM6432,64,128,256 35dB40dB <31Mbit/s53
12V/1A
DVB-S2BROADCASTING
, 300mA SupportedbandwidthofDVB-Cchannel 90dBuV(0÷-15.0dBby1step)/75Ohm 24,04Mbit 19,23Mbit
TDX480 max,DiSEqC1.0EN50494,EN50607 6MHz
12V/1.1A 48.5x198x1
Mbit Frequency bandwidth(MHz)
0° ÷+ 4+ 51,29 44,88Mbit 38,47Mbit 32,05Mbit 25,64Mbit
12 45 mm/0.9 °C 8MHz kg TDQ480 T Mbit
102 8-ch S2 to T/C TRANSMODULATOR MVDS 3 7 4 Front Panel 6 5 TROPHY
TERRESTRIAL interface the is Comments the Within Connect is Connect Connect screws The connections Disconnect All Read Installation instructions: 1 2 established. recommended. settings LINK ACTIVITY module the 30-40 are power the all is [4] safety not active. can of DVB-S2BROADCASTING necessary power green or 75 of seconds the
Indicator mounting included the be W [3] supply instruction front load changed indicator supply module. indicator of panel in to RF in is powering bracket to the , of a unit powering first. the using package. is Fasten f indicators: unused when blinks, on from mains. must 8 9 when the the there the the if and RF web module be communication the module mains terminal. 9 8 7 F 6 control seconds Press shortly 5 Ethernet 4 control 3 interface. 2 signal THRU DC 1 output is control fixed
- - browser - socket. - - - - no - link - Power RF RF IN LINK
output ACTIVITY +12 RESET E link. will 1, before with output. loop-through). input T with F this to Ethernet Ethernet on 1, H cables. IN sockets. interface to run (green) V restart distribution RJ45 E via DIN for THRU steel the 2 R button set (output DC
in making - N button. LNB. control F
RF control RAIL E normal via (yellow) default socket. socket. screws Shielded the interface. interface. powering T indicator input
2 F for the signal - module.
or - sockets. Ethernet any F bus c Press Ethernet operation RF sockets. IP o more individual control Ø of indicator n
connector changes Ethernet address 3.5-4 t loop-through). SA r of output input. o l this T than the
interface.
E IF interface mm. Ethernet t mode. h holder control signal, button Screw of (input of e in cable 103 three . r The n the the the e . t 8-ch S2 to T/C TRANSMODULATOR MVDS interface seconds. Control NOTE: TCP/IP During Note: admin. Access will module, 192.168.1.10, PC/MAC cable (CA computer equippedwithanEthernetcardandRJ-45 T Password: Username: Default Gateway: Subnet mask: IP The programme Subsequently avoid All modulesleavethefactorywiththiscontrolEthernetinterfaceIP Initial configuration OPERA o accesseachmodule,useaPCorMACpersonal addressofthecontrolinterface: appear modules the conflicts TROPHY Enter
If initial configuration TING interface to open you IP default T must When the on -5E orCA
admin address admin it are the leave configuration or , the your since site 255.255.255.0 with it be to
user password using will the TERRESTRIAL IP screen. 192.168.1.1 check web is the configured other
this will address be T as protected LINK name -6). Internet factory browser be possible explained is is IP the The IP set operating - [4] you
and admin addresses, reset IP with to Explorer indicator within by need
password and address 192.168.1.10, DVB-S2BROADCASTING to addressofthe on the user - to 192.168.1.10 access can type status. section default to the following W name it (and change will of in is eb and following the the the necessary start browser 6.12. must) procedure: click and module following user modules Control the blinking, password. be on name range: default , supported changed "Login" to to Ethernet direction: press via be perform and release 192.168.1.2 configured). control the button. The password the as local interface versions http://192.168.1.10. an explained default "RESET" address:192.168.1.10.Inorderto and it. initial area After set T streaming - are TCP/IP o user 192.168.1.254 network configuration start to on this [5] version admin. section name button the
operation configuration: Ethernet (LAN), configuration 10 and The 12. for or in login higher more (do password either local the interfaces not prompt control 104 than mode. . of to use the re- is 3 8-ch S2 to T/C TRANSMODULATOR MVDS "Up time "System "Software request. pressing is "Regions": network modify "T "Serial logout screens aremoduletitle[2]andlogininformationstrings[3].Pressingonthe"Logout"string youcan "Software Device This "Device given between In information The Initial General configuration itle": selected. the time": first of shows TROPHY moment. W fset from top number": it. user information model": devices eb Contact time": screen the This "Change" version": version": time of can Device interface the module on may dif Region each title the be passed ferent following current
The TERRESTRIAL model (if that serial our selected assign device. will supports PC configuration module module control. button "System distributors table appears can configuration screen be supports number from of time, data written a the be in title software software in last several synchronized the module. of changed menu" when "Device of SSDP). module: to power-up DVB-S2BROADCASTING for at System screen the the [2] menu. such preinstalled the version version module. tab place. device information" without module menu/Date,T possibility you contains The or from restart Also number number will for tab restarting the regions. accessed see it easier highlighted . several will of TDT . . table. the a ime. be main
table management. The module. visible the submenu Additional is RF in the menu of device. yellow the in channel "Main" other tabs input items. regions shows Just Press window devices, [1]. list stream Common select depends Using which the can , or which and button be needed menu NTP it, by elements on you installed gives
computers server which "Change" is can active region general . 105 region switch under for Local at by all to in a 8-ch S2 to T/C TRANSMODULATOR MVDS Otherwise bitrateoverflowmayoccur parameters. Ensurethatactualbitratewouldnotreachmorethan95%ofavailablebandwidth. Mbps. Nextnumbershowsmaximumallowedbitrateinthechannelanditdependsonmodulation of usedavailablebandwidthinthechannel. It displaystheoutputbitratestatusofeachchannelinrealtime,Horizontalbarshowspercentage Output bitratestable SSDP diagnostic errorswillbedisplayed.Makesure,thatEthernetrouterisconfiguredproperlytopass is inFigure7"Generalinformationscreen".Ifmodulesstatusredpressthedownarrowand If thereareanymodulesinthenetworktheirstatusanddiagnosticinformationwillbedisplayedasit Other deviceinthenetwork in degreesofCelsius,powervoltageV It representsthefollowingparametersatrealtime:Processorloadinpercents,internaltemperature System statustable It displaysallmoduleerrorsandcomments(ifpossible)howtoeliminatethem. Diagnostic informationtable are connectedtothesameEthernetnetwork. packets(239.255.255.250:1900and239.255.255.246:7900). TROPHY
TERRESTRIAL DVB-S2BROADCASTING . olts. The 1stnumberrighttothebarshowsactualbitratein Also makesurethatallmodules 106 8-ch S2 to T/C TRANSMODULATOR MVDS Press BISS Services it's V will running. displayed type. „List services"). „Choose One T Input statustable ransport alue own sort of input scrambled Bitrate TROPHY "0" “+” services" rules. channels „LCN" can means, icon input as Streams channel of be grayed. onto field
channel" each TERRESTRIAL passed services table that according sign at is service LCN They shows a a and to Logical time combobox. have any for service can to a is that can output a list it. measured DVB-S2BROADCASTING Channel be checkbox Just service of be information selected available number A configured ensure,
list Number is for in of not , and real descrambling. independing services. that services will used . in will time. Every all be this at be services extended Services all Icon in page. service outputted and the on before the TV in selected Select (see can that all input will normally the channels Figure have sort currently proper demodulator service channel these a "Service „channel when have channel name are channels will the not dif number details" indicates number" appear ferent from running services according . numbers. the below). ("List service and 107 will starts list TV be to at of 8-ch S2 to T/C TRANSMODULATOR MVDS rate oftransponderin kSymb/s. „Symbol rate"-parameter isasymbol frequency oftransponder inMHz. „Input frequency"-parameterisa between DVB-SandDVB-S2standards. "Modulation standard"-aselection dSCR/SCR switches. "User band"-parameterusedin any availableRFinput. switch demodulatorof "SCR" and All connected (Master "dSCR" “Satellite “DiSEqC” frequency" – “Universal dSCR andSCRoptionsareavailablein"Input1"only SCR EN50494-see "Source type"-theLNBtypes,thereareseveral:Universal,Quadro,DiSEqC,dSCREN50607, "Polarization" -thepolarizationofconverter "0", "13V","18V","13V/22kHz","18V/22kHz". "LNB Power"-powersupplyoftheconverter–canbesetto megahertz. Use10600MHzfortheuniversalconverter "LNB HIfrequency"-theLNBlocaloscillatorupperfrequencyin megahertz. Use9750MHzfortheuniversalconverter "LNB LOfrequency"-theLNBlocaloscillatorlowerfrequencyin “Input typeselection" Inputtypeselectionsource=dSCRSCR RF inputs „SA 18 the T "User V input"-aparameterthatcan TROPHY modules - Horizontal, same for – B”, - first band", LNB” by and then module “Satellite as loop select
“Input in TERRESTRIAL DISEQC - "dSCR", type power the through). 13 which source Input sourcetype=dSCR dSCR/SCR frequency” in C”, f orconnectto V tableconsistsofthefollowingparameters: frequencies, supply V “Satellite commands just ertical; has type If the direct Slave voltage DVB-S2BROADCASTING parameters. user the as group D”, Demodulator settingstable connection shown was symbol 22 are band V of ertical must kHz used the selected, frequencies in . Canbe"Horizontal"or"V rate converter is be or Figure, to set to in Horizontal select press . Unicable the depending additionally then . same . is “Update” the . must chosen select satellite. polarization. multiswitch Ethernet be on type typed button according “dSCR/SCR given Possible the network. in ertical". and or IP "LNB manually
LNB address to observe commands: the HI mode“ Next and selected frequency" . of Slave select "dSCR" Master Master “Satellite for polarization "SA status. "LNB modules or module. T 108
input" Slave LO A”, 8-ch S2 to T/C TRANSMODULATOR MVDS http://www or usedvaluefromthis location: Original_Network_ID is definedasthe"uniqueidentifierofanetwork". ItcanbelinkedtoNetworkID Each streaminanetworkmusthaveunique ID,called„T (see Figurebelow). The 2ndtableinthepagedescribes „Network name"isthenameofnetwork. The parameterwillnotbeinsertedintoNIT http://www Other optionscanbefoundhere: should use00233A This valueisdescribedin "Private dataspecifier(inhexformat)":canbeinsertedintheNIT http://www Proper valuedependingonyourcountryandoperatorcanbefoundhere: must havethesameNetworkID. If therearemoreconnectedmodulatorsinthenetwork,they usually thisisasinglecountrycodeplus0x2000(8192). region definedbythe"countrycode".Foracablenetwork "Network ID":isuniquenumberwithinthegeographical describes following Several tablesrelatedtoNIT NIT otherwise titles, including NOTE: Press automatically checkbox Individual characters) BISS content. inserted Service TROPHY scrambled onto LCN) If title It into original bitrate only transparent .dvbservices.com/identifiers/original_network_id?page=1 .dvbservices.com/identifiers/private_data_spec_id?page=1 .dvbservices.com/identifiers/network_id?page=1 "Other streams „Update" in will and . SDT hex carries
TERRESTRIAL be overflow P provider services PID". format.
A (Service can T TS parameters: disregarded. button , information SDT mode value. Keep be might TS 101 can , have to PMT disabled Description generationexistinthissection.Figure16"Global save is in be DVB-S2BROADCASTING occur , selected, a EIT mind 162 specification.NorDigstandardrequires0029value,UK about No edited BISS changes , T as . CA more ransport streamIDandOriginalnetworkofeachchannel that the key T well. T (multilanguage , able). all NIT ifvalueissettozero. scrambling and than PID input services PID
tables. execute. must Unchecking 95% field number All be of status of "BISS changes character ransport streamID". output transponder unique, can of this Code". the be bandwidth that tableforproperLCNdescription. checkbox otherwise support). service. remapped Enter were will be made the usage will „Scrambled PID An manually passed TS parameters" BISS not to remapping is these descramble recommended, code to by flag" tables the (12 selecting is output, 109 will or done (new the 16 be 8-ch S2 to T/C TRANSMODULATOR MVDS be Only to the Output can values: the Figure will individual Press checkbox frequency Channels "Output T RF are (239.255.255.250:1900 N protocol. function Every ransmodulator e enter calculated t outputs same, modulator w connected be be the o TROPHY „Update" r restarted channel above calculated channel k 7.0, any will frequency"
first NIT I precise will from that D – frequency 7.5, not .
select
output automatically . tables enable shows M can to the
enumeration find in to TERRESTRIAL a with has 8.0, the k attenuator as change the e range be "Manual" all
frequency/channel parameter two same will 8.3, SR DVB-C new channel s selected you u channels. network r and x independent be e of 8.5 settings. , 1.15 settings. want Ethernet
3500..7200 according regenerated t up h output 239.255.255.246:7900). MHz. depends and to a (1.15 from t to can DVB-S2BROADCASTING in must
the All E 2.5 a type Actual t Exception h In range network. settings. output. other be the here e dB groups to be case, r on n kSym/s. of the entered the list e in if the described bandwidth t modules is the of
any step Global r depend needed selected roll if 100..858 o region The of is group u any t change four of of e „Attenuator", manually r f step
0.5 modulation factor attenuator in i selected s adjacent on can frequency in of step/bandwidth.
the dB. MHz Also c of each which NIT is o be of n RF network detected fi or . in make 15%). g entered Otherwise channel channels u from channels. all changes selected region can r parameter . e Frequency devices. d sure
Symbol will the be p in by r is o entered depends be main other p that can in the selected. as e TV monitored r this was l rates y a user be control page.
step modulators automatic channel t parameter o up changed, selected on
. of p Other to is If However a the all ports you s 15 via 0.1 s channels
symbol from dB. S standard frequencies channel need to MHz. with both S of will D one Also , all combobox. it's P not any the
channels rate, „Enable" modules of p must allowed there a 1 restart tuning SSDP these same c other 10 k and will e be t is s
8-ch S2 to T/C TRANSMODULATOR MVDS with "Host TRAPS. "TRAP message generation. on "Enable access "W access managers. is "Read The "SNMP SNMP SSL SMTP "Sender The as report Comma address, "timeout" report" shows SMTP The E-mail-settings accepted. blink RESET NOTE: button IP mask, All
IP shared
rite parameters the settings device a description
SNMP timer (SMTPS) device TROPHY quickly IP
managed
to Community" gateway first server
settings and protocol parameters Community"
to to Community" IP settings checkbox
button TRAP" #1","Host e-mail multiple separated occurs. the the
will provided by address period Device IP error
redirect "Read managers, The can
multiple modules modules to be side. settings protocol ,
will for address" TERRESTRIAL of is table" - inform, DNS is restarted module send addresses. device. SNMP will will Community" the used enables detected, at can IP be related to - in e-mail community - -
least (Domain be new SNMP #2""Host SNMP is be can is updated parameters. parameters. e-mail where "Receiver is be is for that
located restarted traps generates the not can the again reset gathered, Check location. be to 3 that. error addresses
the
and configuration seconds. supported. password The this TRAPS agents be reports configured password are Name password IP immediately to DVB-S2BROADCASTING if in name Figure reset used stopped monitoring. feature. timer a
default e-mail this with #3" "IP alerts new traps and and System),
will parameters" if - as IP acts default Ethernet box will "E-mail can used IP errors error
generated be (192.168.1.10) address address" used authentication is when here one "Enable
when send parameters: addresses be as used send. to be after will for All started IP a or were see – enable settings the for password e-mail used "link"
to address. appear accessing IP for errors more pressing request e-mail tab. Figure.
the diagnostic input read-write address, by read-only detected. as of led to is agents SNMP e-mail TRAP . within table" hosts soon, in by send sent. error will box. that has the „Update" pressing of start subnet
been to 1 1 1 8-ch S2 to T/C TRANSMODULATOR MVDS Figure software Click Device A setup continue tooperatewithpreviousparameters. It when size device. Otherwise firmware Device Firmware new after It Press "Import same Import Exported parameters" Export All instructions Each "Export „Erase and type, V Event "Date,T parameters", This System arious void will may settings press of configuration. file take which menu the the TROPHY additionally type power record "Upload" take below). a logs" logs has parameters ime", parameters parameters") firmware logs" Upload important upload. menu file releases file binary parameters "Check several „apply". upgrade of an additional of can possibility
how and button supply tab was and device. "Language". button has transmodulator "Firmware error After
button be progress TERRESTRIAL After a to file. can contains sent "parameters.xml" seconds to online" Other network events, with a used No configure will interruption that, forms take message log If to that, minute be can to restart to to erase links valid select to the messages load send use time upgraded ef bar upgrade", link. Mouse the device be errors, filter to fect. connection following device. to file the time or update is all software will imported file can exported the when will binary If required. particular more when logs DVB-S2BROADCASTING firmware was computer (log.html) will appear over settings. warnings file be appear via will file New from all the "User function to to exported selected, files. a submenu to speed. revision be web will back parameters programming flash the file. show firmware event messages. and the . upgrade hidden. Binary be device. Press which (not will management", browser to new system. with may A downloaded the for the history be Additional newfirmwarefeatures(ifany)may needto
a appeared. message device!) items: program. will version the file list will backup logged method take device. . Just be of process can Press "Upload" be and this several downloaded "Event programmed has select be will into number or as check Press Device to Refer submenu. "Restore the downloaded copying described be PC. internet is "Event button checkboxes going "Click seconds logs", displayed onto availability to This will of 6.10.8 to to new logs". defaults", on. start access, into to "Click to file PC. "Export another above. select to upload and the can firmware asking up upload, Each "Date, in for to with device saved the be it select new file" parameters", device. " will new record imported to „Logs Reset a T depending will new button restart software ime" to show only file" firmware computer Press be filtering" firmware has the after settings button a and only displayed. the an list release. device", "Export "Import restart. device 1 on select to to event of table (see (see 12 and the the the for all 8-ch S2 to T/C TRANSMODULATOR MVDS subscribers. This SA T Dishes.Pentaseries dishes TROPHY are used
TERRESTRIAL as part of corporate DVB-S2BROADCASTING cable networks, as well as for receiving signals by individual 1 13