DOCSLIB.ORG

Project Report on Promoting Renewable Power Generation with Fuel Cell

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Project Report on Promoting Renewable Power Generation with Fuel Cell Project Report on Promoting Renewable Power Generation with Fuel Cell Beijing, China Energy Working Group October 2016 APEC Project: EWG 13 2015A – Promoting Renewable Power Generation with Fuel Cell Produced by Xu Dong, Jerry Chen, Wang Nong-zhang, Zhao Yi-ming Guodian New Energy Technology Research Institute 2 Street, Future Science & Technology Park North, Changping District, Beijing, 102209, China For Asia-Pacific Economic Cooperation Secretariat 35 Heng Mui Keng Terrace Singapore 119616 Tel: (65) 68919 600 Fax: (65) 68919 690 Email: [email protected] Website: www.apec.org © 2017 APEC Secretariat APEC#216-RE-01.24 Table of Contents 1. Introduction .................................................................................................................... 4 2. Summary of the Site Visits .......................................................................................... 4 3. Forum Summary ........................................................................................................... 6 3.1. Basic information ............................................................................................................ 6 3.2. Forum organization ........................................................................................................ 7 3.3. Interviews and experts voice ....................................................................................... 11 3.4. Forum challenges ........................................................................................................... 12 4. Discussions of the project outputs .......................................................................... 13 4.1. Discussion of the project evaluation survey ............................................................ 13 4.2. Discussion of the commercial analysis report ......................................................... 19 4.3. Discussion of the progress review report ................................................................. 20 5. Overall impact and lessons learned ........................................................................ 21 6. Conclusions and Recommendations ....................................................................... 24 6.1. Conclusions and information on next steps ............................................................. 24 6.2. Recommendation for next steps ................................................................................. 27 Annexes ................................................................................................................................ 29 Annex 1：Forum participant list ................................................................................... 29 Annex 2：Experts / consultants list ............................................................................... 61 Annex 3：Domestic media coverage links of the forum ........................................... 83 Annex 4：commercial analysis report .......................................................................... 84 Annex 5：Fuel cell Technical Progress review report ............................................ 125 Reference ........................................................................................................................... 173 Project Report on Promoting Renewable Power Generation with Fuel Cell Beijing, China 1. Introduction As a new technique of power generation, fuel cell is playing a more and more important role in the energy area due to its own advances- high efficiency and zero pollution emission. Fuel cell technology is a promising approach to making the energy industrial green and environment friendly. This report integrates the key findings of interviews, site visits, forum summary, commercial analysis results and secondary research. The greatest value of the report could be the first-hand information summary and in-depth analysis on the potential of integrating fuel cell into renewable energy generation projects. The main discussion section of report composes of five parts: site visit summary, forum summary, project evaluation survey, commercial analysis report and fuel cell technical progress review report. The interview discussion has been integrated in the section of forum summary. 2. Summary of the Site Visits From 10-15 August 2015, research delegates from Guodian New Energy Technology Research Institute （GNETRI）visited three different fuel cell related organizations and company in Chinese Taipei, to learn more about fuel cell industry and R&D base. The first site visit is in the Green Energy and Environment Laboratories (GEEL) of Industrial Technology Research Institute of Chinese Taipei. GEEL has devoted its resources to develop novel green energy and environment technologies for a better future. Fuel Cell technology is one of its energy and environment topics. The scientists there introduced its upper, middle and lower reaches of the fuel cell industry. They mentioned the major research area focused on hydrogen produce and hydrogen storage. The visitors also looked around the project results exhibition center of Industrial Technology Research Institute of Chinese Taipei. The second site visit is in Chinese Taipei Fuel Cell Partnership (TFCP), which aims to promote the application and promotion of fuel cell technology and industry in Chinese Taipei. During the visit, Dr Chunto Tso, Convenor of Chinese Taipei Fuel Cell Partnership introduced that the mission and goal of TFCP is to enhance public awareness and application of fuel cell technology and industry,to create a favorable environment and industrial growth of high-quality infrastructure in Chinese Taipei, and to promote the national attention to fuel cell technology and industry. Dr Chunto Tso also enhanced that Chinese Taipei has a mature and complete fuel cell industry chain, providing international manufacturers with excellent quality and affordable (cost down) fuel cell products and related key components. He recommended a novel fuel cell motorcycle pushing forward toward the market. Chinese Taipei has 15 million motorbikes/scooters popular for convenient transport and parking. At the same time, Low-pressure MH canisters are safe and easy to change for FC scooters in Chinese Taipei. Road tests have been successfully completed, demonstrating this superior manufacturing technology. Cross-strait as well as international collaboration in the development of FC scooters related technology is welcomed towards to all the visitors. The third site visit is in Hephas Energy of Chinese Taipei, which is a company dedicating on fuel cell test equipment and fuel cell system parts supply in China and Chinese Taipei. The CTO of Hephas introduced to the visitors during the site communication that they provide variety of test equipment from material research, short stack evaluation and stack performance/durability testing. Besides the fuel cell IV performance, Hephas provide more electrochemistry diagnosis methods. Hephas owns 20 people engineering cover from mechanical, electrical, process engineering, and electrochemistry experts. The design and manufacturing center that has been visited and looked around is located in Hsinchu science part in Chinese Taipei. The core competence of Hephas shown to visitors is based on Temperature, Humidity, Pressure, Flow and electrochemistry control in different kinds of fuel cell testing requirement. It is known that Hephas working with global fuel cell partners like Sunfire (Germany), Hydorgenics (Canada), KIKUSUI (JAPAN), ELCOGEN (Finland), AvCarb (USA), etc, providing full range of fuel cell material and components supply, such as catalyst, gas diffusion layer, MEA, Stack, blower, pumps, and stacks. Hephas dedicate customer with best capability and service for customer satisfaction and the company owns 80% market share in Chinese Taipei and China fuel cell research market and revenue. 3. Forum Summary 3.1. Basic information On 18 and 19 January 2016, the APEC forum on Fuel Cell, initiated by China and co-sponsored by Hong Kong, China; Chinese Taipei; and the United States was successfully held in Beijing, China. The forum was sponsored by APEC Energy Working Group, National Energy Bureau and China Guodian Corporation and organized by Guodian New Energy Technology Research Institute. The main purpose of the forum was to promote the development of fuel cell technologies. The forum aimed to provide a platform for in-depth discussion on the commercialization pathway of fuel cells, and to propose solutions to the technical bottlenecks through constructive communications and interactions among engineers, scientists and government leaders from major global fuel cell industries and world leading research organizations. The forum covered four sections: (i) Review of fuel cell technology development and industry layout; (ii) Transportation fuel cell technology; (iii) Stationary fuel cell power generation technology; (iv) Hydrogen and its infrastructure construction. The tendency of the development of fuel cell technology was discussed and the newest products from global leading fuel cell research institutes and industrials were shared to all the delegates. 3.2. Forum organization The Organizing Committee in the pre conference set up project team, by telephone, mail, visiting form and fuel cell of upstream and downstream industry chain enterprises of communication invited to participate in, and through traditional media, network platform, micro channel, the app, meeting the industry related media channels of the meeting of all aspects
Load more

Recommended publications
  • Fuel Cell Seminar 2010
    Fuel Cell Seminar 2010 Konferensbevakning Elforsk rapport 11:44 Bengt Ridell Grontmij AB Augusti 2011 Fuel Cell Seminar 2010 Konferensbevakning Elforsk rapport 11:44 Bengt Ridell, Grontmij AB Augusti 2011 ELFORSK Förord Denna rapport är framtagen inom projektet Teknikbevakning av bränslecellsområdet under 2010-2011 (Elforsk projektnummer 25043). Rapportens huvudsakliga slutsatser presenteras i en slutrapport för hela teknikbevakningsprojektet (Elforsk rapport 11:48). Projektet har till största delen finansierats av Energimyndigheten. E.ON Sverige, Volvo och Vätgas Sverige har bidragit med egeninsatser. Stockholm augusti 2011 Bertil Wahlund Programområde El- och värmeproduktion ELFORSK Sammanfattning Fuel Cell Seminar 2010 arrangerades i San Antonio, Texas. Det kom ca 1200 deltagare till Fuel Cell Seminar 2010, vilket är något mindre jämfört med de föregående åren. I utställningen fanns 135 montrar och bland dem två svenska företag; Sandvik och Morphic. Fuel Cells 2000 har nyligen publicerat en omfattande rapport som det ofta refererades till under konferensen, The Business Case for Fuel Cells. Här presenteras de flesta större pågående demonstrationsprojekt i USA som är finansierade av DOE, ca 40 olika projekt både MCFC-biogas projekt och PEFC för gaffeltruckar. Under konferensen betonades ofta att bränsleceller redan idag kan användas som en färdig produkt inom många områden. En speciell session kallad Early Market Sucess Stories bekräftade detta En del viktiga punkter och nyheter från konferensen . Intresset för naturgas har ökat igen, det finns nu en större förväntad tillgång till naturgas och priset är på väg ner . I USA finns flera olika betydande subsidier för bränsleceller både federalt och på delstatsnivå samt ARRA American Recovery Act för inköp till federala anläggningar med syftet att öka möjligheter till kommersialisering av ny teknik.
    [Show full text]
  • Bagotsky V.S. Fuel Cells.. Problems and Solutions (Wiley, 2009
    FUEL CELLS Problems and Solutions VLADIMIR S. BAGOTSKY A.N. Frumkin Institute of Electrochemistry and Physical Chemistry Russian Academy of Sciences Moscow, Russia FUEL CELLS FUEL CELLS Problems and Solutions VLADIMIR S. BAGOTSKY A.N. Frumkin Institute of Electrochemistry and Physical Chemistry Russian Academy of Sciences Moscow, Russia Copyright r 2009 by John Wiley & Sons, Inc. All rights reserved. Published by John Wiley & Sons, Inc., Hoboken, New Jersey. Published simultaneously in Canada. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, scanning, or otherwise, except as permitted under Section 107 or 108 of the 1976 United States Copyright Act, without either the prior written permission of the Publisher, or authorization through payment of the appropriate per-copy fee to the Copyright Clearance Center, Inc., 222 Rosewood Drive, Danvers, MA 01923, (978) 750-8400, fax (978) 750-4470, or on the web at www.copyright.com. Requests to the Publisher for permission should be addressed to the Permissions Department, John Wiley & Sons, Inc., 111 River Street, Hoboken, NJ 07030, (201) 748-6011, fax (201) 748-6008, or online at http://www.wiley.com/go/permission. Limit of Liability/Disclaimer of Warranty: While the publisher and author have used their best efforts in preparing this book, they make no representations or warranties with respect to the accuracy or completeness of the contents of this book and specifically disclaim any implied warranties of merchantability or fitness for a particular purpose. No warranty may be created or extended by sales representatives or written sales materials.
    [Show full text]
  • Carbon-Air Fuel Cells with Molten Tin Anodes
    PhD Thesis Carbon-Air Fuel Cells with Molten Tin Anodes Melanie Alejandra Colet Lagrille Supervisor: Geoff Kelsall Department of Chemical Engineering Imperial College London South Kensington Campus London SW7 2AZ, United Kingdom A THESIS SUBMITTED FOR THE DEGREE OF DOCTOR OF PHILOSOPHY AND THE DIPLOMA OF MEMBERSHIP OF IMPERIAL COLLEGE LONDON June 21, 2013 DECLARATION I confirm that this report is my own work and where reference is made to other research this is referenced in text. Copyright Notice Imperial College of Science, Technology and Medicine Department of Chemical Engineering Carbon-Air Fuel Cells with Molten Tin Anodes ‘The copyright of this thesis rests with the author and is made available under a Creative Commons Attribution Non-Commercial No Derivatives license. Researchers are free to copy, distribute or transmit the thesis on the condition that they attribute it, that they do not use it for commercial purposes and that they do not alter, transform or build upon it. For any reuse or redistribution, researchers must make clear to others the license terms of this work’ © 2013 Melanie Colet Lagrille [email protected] Published by: Melanie Colet Lagrille Department of Chemical Engineering Imperial College London South Kensington Campus, London, SW7 2AZ UK www.imperial.ac.uk Dedicated to my parents, Mónica and Alejandro, and my sister Madeleine, who have encouraged me to make my dreams come true. “You see, but you do not observe. The distinction is clear.” Sherlock Holmes, ‘A Scandal in Bohemia’ Abstract Carbon-air fuel cells are a prospective technology for efficient conversion of the chemical energy of solid carbonaceous fuels directly to electrical energy.
    [Show full text]
  • Performance Analysis of Direct Carbon Fuel Cell-Braysson Heat Engine Coupling System
    Int. J. Electrochem. Sci., 15 (2020) 4908 – 4914, doi: 10.20964/2020.06.32 International Journal of ELECTROCHEMICAL SCIENCE www.electrochemsci.org Short Communication Performance Analysis of Direct Carbon Fuel Cell-Braysson Heat Engine Coupling System Liwei Chen1,2,*,Lihua Gao1, Yingyan Lin1 1 School of Mechanical & Electronic Engineering, Sanming University, Sanming 365004, China; 2 Department of Mechanical Engineering, University of South Carolina, Columbia, 29208, South Carolina, USA. E-mail: [email protected] Received: 5 February 2020 / Accepted: 26 March 2020 / Published: 10 May 2020 In this paper, a new coupling system with irreversible Braysson based direct carbon fuel cell is constructed. The new irreversible coupling system can utilize the high quality waste heat generated in the working process of direct carbon fuel cell to drive the irreversible Braysson heat engine, so as to improve the overall working performance. The analytical expressions of direct carbon fuel cell, irreversible Braysson heat engine and coupling system are given respectively, and the performance of the newly constructed coupling system is obviously better than that of the single direct carbon fuel cell. Keywords: irreversible Braysson heat engine; Direct carbon fuel cell coupling system; Performance analysis 1. INTRODUCTION After the industrial revolution in the 18th century, coal, as the main fossil energy, was praised as the food of industry, the black gold. Even today, coal is still one of the important energy sources indispensable to human production and life. In 2018, China's normal coal production capacity was 3.61 billion tons, accounting for eight of the world's top ten coal enterprises [1]. At present, more than 60% of China's electricity is generated by coal.
    [Show full text]
  • EHEC2014 Program.Pdf
    The organizers would like to t hank our generous sponsors and collaborators: PLATINUM SPONSOR GOLD SPONSOR SILVER SPONSOR COLLABORATORS MEDIA PARTNERS Chairman Welcome Letter Dear friends and colleagues from the hydrogen and fuel cell sector, as Chairman of the Organizing Committee of EHEC 2014, and of the Spanish Hydrogen Association, it is my pleasure to invite you to this edition of the event, held from 12th to 14th of March 2014 in our beautiful city of Seville. The European Hydrogen Energy Conference is, without doubt, the European reference framework for updates on hydrogen and fuel cell related technologies, and the best setting to present the advances in research, products and projects we are all developing in the sector. With the more traditional economic activities in a crisis situation, there can be no doubt that our technologies are going to contribute to the creation of markets, prosperity and opportunities and, unquestionably, new jobs in our home countries and regions. We must demonstrate that we have viable projects, mature technologies and products that provide solutions. It is the great opportunity we have been waiting for and we want to share it with you at EHEC 2014! Led by the Scientific Committee, we have selected the fields and subjects we believe will be of most interest to our community. In this respect, the plenary sessions are sure to arouse the expectations of all, for their topicality and relevance. As a native of Seville, I would also like to inform you that March is one of the nicest months to visit the city, when orange blossom and jasmine are in bloom; I would encourage some sightseeing in this ancient city whenever this exciting conference is not occupying all your time here.
    [Show full text]
  • Hydrogen Energy and Fuel Cells a Vision of Our Future
    vision_hydro (corr) 13/10/03 16:22 Page 1 SPECIAL REPORT EUR 20719 EN FINAL REPORT OF THE HIGH LEVEL GROUP vision_hydro (corr) 13/10/03 16:22 Page 2 Interested in European research? RTD info is our quarterly magazine keeping you in touch with main developments (results, programmes, events, etc.). It is available in English, French and German. A free sample copy or free subscription can be obtained from: European Commission Directorate-General for Research Information and Communication Unit B-1049 Brussels Fax: (32-2) 295 8220 E-mail: [email protected] Website: http://europa.eu.int/comm/research/rtdinfo_en.html EUROPEAN COMMISSION Directorate-General for Research Directorate J – Energy Unit J-2 – Energy Production and Distribution Systems B-1049 Brussels Helpdesk: [email protected] Website: http://europa.eu.int/comm/research/energy/index_en.html Directorate-General for Energy and Transport Directorate D – New Energies and Demand Management Unit D-4 – Clean Transport B-1049 Brussels Website: http://europa.eu.int/comm/energy_transport/en/cut_en.html Further information can also be found on the CORDIS website at: http://www.cordis.lu/sustdev/energy/ vision_hydro (corr) 13/10/03 16:22 Page 3 EUROPEAN COMMISSION Hydrogen Energy and Fuel Cells A vision of our future Directorate-General for Research 2003 Directorate-General for Energy and Transport EUR 20719 EN vision_hydro (corr) 13/10/03 16:22 Page 4 04 HYDROGEN ENERGY AND FUEL CELLS – A VISION OF OUR FUTURE This is how an integrated energy system of the future might look – combining large and small fuel cells for domestic and decentralised heat and electrical power generation.
    [Show full text]
  • DNV GL Perspective- Regulations, Codes and Standards H2@Ports Workshop
    DNV GL Perspective- Regulations, Codes and Standards H2@Ports Workshop Anthony Teo 11 September 2019 1 DNV GL © 2015 11 September 2019 SAFER, SMARTER, GREENER ABOUT DNV GL - Leading the surge towards the future OIL & GAS ENERGY MARITIME • Maritime is our core industry • 11,678 ships & mobile offshore units in DNV GL class, 280.6 mGT • Strong presence in all ship segments BUSINESS DIGITAL • Dedicated ship type expert teams ASSURANCE SOLUTIONS support our clients worldwide • Among top performing class societies in Port State Control statistics • 200 Maritime offices across the world 24% 3,600 12,500 5% Market share (measured in GT) Maritime staff employees revenue invested in worldwide groupwide R&D activities 2 DNV GL © 2015 11 September 2019 Total number of ships (in operation and on order) 3 DNV GL © 2015 11 September 2019 Number of ships with batteries by ship type 4 DNV GL © 2015 11 September 2019 Towards zero emissions in shipping • HYBRID – “Vision of the Fjords” – The ship of the year 2016 – Flom-Gudvangen – Diesel hybrid 2 * 150 kW el- engines, 600 kWh batteries – Fastest ever - 14 months from contract to delivery 18.july 2016 • BATTERIES – “Future of the Fjords” – 100% electric 2 * 450 kW el- engines, 1.8 MWh batteries – Delivery 1.april 2018 • HYDROGEN – FUEL CELLS – Next generation – Increased range – Reduced weight possible – More flexible charging/bunkering Copyright Brødrene Aa DNV GL © 2015 11 September 2019 Maritime FC- Noteable Projects Zero/V - Hydrogen Fuel-Cell Coastal Research Vessel Sandia partnered with the Scripps Institution of Oceanography, the naval architect firm Glosten and the class society DNV GL to assess the technical, regulatory and economic feasibility of a hydrogen fuel-cell coastal research vessel.
    [Show full text]
  • Country Report Outline – TIP Energy Focus Group FRANCE –Document 3 CASE STUDY – FUEL CELLS March 2004 Draft Version
    1 Country Report Outline – TIP Energy Focus Group FRANCE –Document 3 CASE STUDY – FUEL CELLS March 2004 Draft version B.Bourgeois CNRS, UPMF/LEPII/EPE 26 th of March 2004 LEPII - EPE ◆ BP 47 - 38040 Grenoble CEDEX 9 - France 150 rue de la Chimie - 38400 Saint Martin d'Hères Tél.: + 33 (0)4 76 51 42 40 ◆ Télécopie : + 33 (0)4 76 51 45 27 [email protected] ◆ http://www.upmf-grenoble.fr/lepii-epe/ 2 Plan Introduction 0.1-Fuel cells and hydrogen delineation system issues 0.2- Four stylised facts about fuel cell innovation in 2003 A- A 2003 picture of the fuel cells system of innovation in France and the PACo network A.1- Introduction A1.1-A short historical survey of fuel cells development in France A.1.2- A Global picture of the French fuel cells innovation system A.2-The coordinating institutions of the PACo network A.3- The three main categories of actors within the network A.3.1. - The Public Research Organizations (PRO) A.3.1.1. - CEA A.3.1.2-CNRS A.3.1.3- The rest of public research actors A.3.2- Enterprises / Providers and Users A.3.2.1 - Large enterprises : providers and users A.3.2.2- SME and start-ups B-Knowledge learning process from the drivers of the fuel cells innovation system (including public policy for this innovation system) Introduction B1- The learning process within the coordinating institutions of PACo network B2- The specific learning processes for the categories of actors B.2.1- Learning process within Public Research Organizations The special case of Technology bottlenecks ( verrous technologiques) and Basic
    [Show full text]
  • Fuel Cells Initial Position
    Renewable Energy Research for Global Markets SOFC1) in Jülich Fuel Cells Initial Position Materials and systems for combined heat and power generation in 1. industry and households SOFC in Jülich ► Improved overall efficiency X Initial Position ► Environmentally friendly: no pollution ► Scalability for utilization in several applications Research Results Challenges on the way to implementation ► Multi-disciplinary R&D tasks: - Optimization of thermo-mechanical behaviour w.r.t. stable sealing and operation of stacks - Understanding and resolving degradation effects w.r.t. 1) SOFC: Solid Oxide Fuel Cell longevity of 20,000 – 50,000 h - Reduction of operation temperatures to 600 – 700 °C - Accelerated testing methods - Process, stack, system integration and upscaling to > 50 kW 20 kW system with integrated modules Renewable Energy Research for Global Markets SOFC in Jülich Fuel Cells Research 1. Cells with reduced operating temperatures and increased lifetime ► Cost-effective production of cells with novel materials and processes SOFC in Jülich ► Cell operation on reformate @ 400 – 600 °C for > 10,000 h Initial Position High performance and robust kW-class stack technology X Research ► Advanced steel, protective coatings and sealing Results ► Resolution of thermo-mechanical and degradation effects ► Accelerated testing and computational design System technology with thermal integrated stack modules ► Advanced modelling and simulation of BoP2) components and systems ► Design & testing of BoP2) components, integrated modules and systems 2) BoP: Balance of Plant Milestones ► 2011: 3rd generation 2 kW stack @ 5,000 h @ u 3) > 60 % 3) μF: Fuel Utilization F ► 2012: Thin film cells with 16 cm² delivering 0.5 W/cm² @ 600 °C ► 2014: Concept of integrated sub-module for systems of 20 – 250 kW Cell components (top right), 60-cell stack Cooperations (bottom right) and computer-simulated ► Universities: Aachen, Imp.
    [Show full text]
  • Development and Optimisation of the Direct Carbon Fuel Cell
    FINAL REPORT Development and Optimization of the Direct Carbon Fuel Cell Professor Scott Donne University of Newcastle February 26, 2016 Final Report, 2016 Submitted to Coal Innovation NSW Project Commence Date: April, 2011 Project Cessation Date: December 2015 Project Duration: 5 years Funding Allocated: $564,748 Phone: (02) 4921 5477 Fax: (02) 4921 5472 Email: [email protected] Address: Discipline of Chemistry, University Drive, Callaghan NSW 2308, Australia 1 Executive Summary Professor Scott Donne and co-investigators at the University of Newcastle (UoN) are investigating the Direct Carbon Fuel Cell (DCFC), a technology that has the ability to efficiently utilize coal to produce electricity with minimal environmental greenhouse gas emissions. The DCFC is not a new technology, having been first demonstrated by Grove in 1839, and then investigated further by Jacques in 1896 (US Patent 555,511) for the direct production of electricity. While this system demonstrated the concept, it was expensive at the time and encountered problems with system impurities. Since then a number of researchers have occasionally revisited the DCFC, gradually making fundamental and performance improvements, until the present time when the DCFC is now viewed as a viable alternative for coal-fired energy generation. In fact, the basic chemical reaction used by a coal fired power station and a DCFC are the same. The only difference is that the DCFC directly converts solid carbon into electrical energy through an electrochemical process where oxygen is combined with the carbon, as shown in the following schematic. - Here the cathodic process is the reduction of oxygen (O2) in air with electrons (e ) from the external circuit to form oxide anions (O2-).
    [Show full text]
  • A Demonstration of Carbon-Assisted Water Electrolysis
    Energies 2013, 6, 1657-1668; doi:10.3390/en6031657 OPEN ACCESS energies ISSN 1996-1073 www.mdpi.com/journal/energies Communication A Demonstration of Carbon-Assisted Water Electrolysis Bruce C.R. Ewan 1,* and Olalekan D. Adeniyi 2 1 Chemical & Biological Engineering Department, University of Sheffield, Mappin Street, Sheffield S1 3JD, UK 2 School of Engineering and Engineering Technology, Federal University of Technology, Gidan Kwano Campus PMB 65, Minna, Niger State, Nigeria; E-Mail: [email protected] * Author to whom correspondence should be addressed; E-Mail: [email protected]; Tel.: +44-114-222-7504; Fax: +44-114-222-7501. Received: 19 December 2012; in revised form: 22 February 2013 / Accepted: 5 March 2013 / Published: 11 March 2013 Abstract: It is shown that carbon fuel cell technology can be combined with that of high temperature steam electrolysis by the incorporation of carbon fuel at the cell anode, with the resulting reduction of the required electrolysis voltage by around 1 V. The behaviour of the cell current density and applied voltage are shown to be connected with the threshold of electrolysis and the main features are compared with theoretical results from the literature. The advantage arises from the avoidance of efficiency losses associated with electricity generation using thermal cycles, as well as the natural separation of the carbon dioxide product stream for subsequent processing. Keywords: electrolysis; gasification; carbon fuel cell; solid oxide cell 1. Introduction High temperature electrolysis of water has been the subject of a number of studies in recent years [1–3] and the benefits derive from the positive entropy change and hence reducing free energy change with temperature.
    [Show full text]
  • 2018 Aiche Annual Meeting
    Poster Sessions 2018 Core Programming Area at the 2018 AIChE Annual Meeting Pittsburgh, Pennsylvania, USA 28 October - 2 November 2018 Volume 1 of 3 ISBN: 978-1-5108-7609-5 Printed from e-media with permission by: Curran Associates, Inc. 57 Morehouse Lane Red Hook, NY 12571 Some format issues inherent in the e-media version may also appear in this print version. Copyright© (2018) by AIChE All rights reserved. Printed by Curran Associates, Inc. (2019) For permission requests, please contact AIChE at the address below. AIChE 120 Wall Street, FL 23 New York, NY 10005-4020 Phone: (800) 242-4363 Fax: (203) 775-5177 www.aiche.org Additional copies of this publication are available from: Curran Associates, Inc. 57 Morehouse Lane Red Hook, NY 12571 USA Phone: 845-758-0400 Fax: 845-758-2633 Email: [email protected] Web: www.proceedings.com TABLE OF CONTENTS VOLUME 1 (6b) Functional Biomaterials for Smart Delivery of Therapeutics ...............................................................................................................1 Lisa R. Volpatti (6c) Molecular Recognition: From Polymer Science to Precision Medicine................................................................................................2 John R. Clegg (6d) Morphological Aspects in Materials for Biotechnological Applications ..............................................................................................3 Jyothirmai J. Simhadri (6g) Transformation of Waste Biomass into Bioproducts (Bioenergy, Biomaterials, Biochemicals)........................................................4
    [Show full text]