Environmental Protection Agency § 117.3
Total Page：16
File Type：pdf, Size：1020Kb
Load more
Recommended publications
-
PRICELIST-1920-FINAL.Pdf
INDEX Page No. MD Speech 01 Our Vision / Our Mission 02 Product Classification and Grade Information 03 Label Information 04 GHS Compliance 05 Technical Data Sheet and COA 06 Qualikems Product Range 07 ISO Certificate 08 - 09 Company Details 10 Ordering Information 11 Terms & Conditions 12 Rate List 13 - 52 Images of Lab / Plant / R & D 53 - 58 Rate List 59 -116 BELIEVING yourselfIN IS THE FIRST SECRET TO Success Dear Reader, The document you are holding is the result of work performed by the team of professionals of QUALIKEMS. It is the fruit of our teams extensive technical experience combine with the collaboration of our customers, who have offered us their valuable comments and proposals for improvement. At Qualikems, we have been working and investing for many years with our thoughts focused on the long term. Only thus can this comprehensive catalogue be kept up to date with the products you need. Our highly trained workforce, using state of the art technology, is the driving force behind the management of our modern factory, and our principal aim is to guarantee that the QUALIKEMS product range meets the conditions you require. QUALIKEMS reinforces industrial character and the path to progress we have continuously forged over the years. This path requires the responsible use of resources and the sustainability of our business activity. It is likewise requires and ability to keep on growing as the way to earn and to preserve our status as the leading supplier of laboratory reagents to our Clients Ashok Sahni Managing Director QUALIKEMS FINE CHEM PVT. -
162 Part 175—Indirect Food Addi
§ 174.6 21 CFR Ch. I (4–1–19 Edition) (c) The existence in this subchapter B Subpart B—Substances for Use Only as of a regulation prescribing safe condi- Components of Adhesives tions for the use of a substance as an Sec. article or component of articles that 175.105 Adhesives. contact food shall not be construed as 175.125 Pressure-sensitive adhesives. implying that such substance may be safely used as a direct additive in food. Subpart C—Substances for Use as (d) Substances that under conditions Components of Coatings of good manufacturing practice may be 175.210 Acrylate ester copolymer coating. safely used as components of articles 175.230 Hot-melt strippable food coatings. that contact food include the fol- 175.250 Paraffin (synthetic). lowing, subject to any prescribed limi- 175.260 Partial phosphoric acid esters of pol- yester resins. tations: 175.270 Poly(vinyl fluoride) resins. (1) Substances generally recognized 175.300 Resinous and polymeric coatings. as safe in or on food. 175.320 Resinous and polymeric coatings for (2) Substances generally recognized polyolefin films. as safe for their intended use in food 175.350 Vinyl acetate/crotonic acid copoly- mer. packaging. 175.360 Vinylidene chloride copolymer coat- (3) Substances used in accordance ings for nylon film. with a prior sanction or approval. 175.365 Vinylidene chloride copolymer coat- (4) Substances permitted for use by ings for polycarbonate film. 175.380 Xylene-formaldehyde resins con- regulations in this part and parts 175, densed with 4,4′-isopropylidenediphenol- 176, 177, 178 and § 179.45 of this chapter. -
Environmental Protection Agency § 117.3
Environmental Protection Agency § 117.3 (iii) Which are used or could be used (j) Process waste water means any for industrial purposes by industries in water which, during manufacturing or interstate commerce; processing, comes into direct contact (4) All impoundments of waters oth- with or results from the production or erwise defined as navigable waters use of any raw material, intermediate under this paragraph; product, finished product, byproduct, (5) Tributaries of waters identified in or waste product. paragraphs (i) (1) through (4) of this section, including adjacent wetlands; [44 FR 50776, Aug. 29, 1979, as amended at 58 and FR 45039, Aug. 25, 1993; 65 FR 30904, May 15, (6) Wetlands adjacent to waters iden- 2000] tified in paragraphs (i) (1) through (5) of this section (‘‘Wetlands’’ means § 117.2 Abbreviations. those areas that are inundated or satu- NPDES equals National Pollutant rated by surface or ground water at a Discharge Elimination System. RQ frequency and duration sufficient to equals reportable quantity. support, and that under normal cir- cumstances do support, a prevalence of § 117.3 Determination of reportable vegetation typically adapted for life in quantities. saturated soil conditions. Wetlands Each substance in Table 117.3 that is generally included playa lakes, listed in Table 302.4, 40 CFR part 302, is swamps, marshes, bogs, and similar assigned the reportable quantity listed areas such as sloughs, prairie potholes, in Table 302.4 for that substance. wet meadows, prairie river overflows, mudflats, and natural ponds): Provided, TABLE 117.3—REPORTABLE QUANTITIES That waste treatment systems (other OF HAZARDOUS SUBSTANCES DES- than cooling ponds meeting the cri- IGNATED PURSUANT TO SECTION 311 OF teria of this paragraph) are not waters THE CLEAN WATER ACT of the United States. -
Refrigerant Safety Refrigerant History
Refrigerant Safety The risks associated with the use of refrigerants in refrigeration and airconditioning equipment can include toxicity, flammability, asphyxiation, and physical hazards. Although refrigerants can pose one or more of these risks, system design, engineering controls, and other techniques mitigate this risk for the use of refrigerant in various types of equipment. Refrigerant History Nearly all of the historically used refrigerants were flammable, toxic, or both. Some were also highly reactive, resulting in accidents (e. g., leak, explosion) due to equipment failure, poor maintenance, or human error. The task of finding a nonflammable refrigerant with good stability was given to Thomas Midgley in 1926. With his associates Albert Leon Henne and Robert Reed McNary, Dr. Midgley observed that the refrigerants then in use comprised relatively few chemical elements, many of which were clustered in an intersecting row and column of the periodic table of elements. The element at the intersection was fluorine, known to be toxic by itself. Midgley and his collaborators felt, however, that compounds containing fluorine could be both nontoxic and nonflammable. The attention of Midgley and his associates was drawn to organic fluorides by an error in the literature that showed the boiling point for tetrafluoromethane (carbon tetrafluoride) to be high compared to those for other fluorinated compounds. The correct boiling temperature later was found to be much lower. Nevertheless, the incorrect value was in the range sought and led to evaluation of organic fluorides as candidates. The shorthand convention, later introduced to simplify identification of the organic fluorides for a systematic search, is used today as the numbering system for refrigerants. -
Environmental Protection Agency § 117.3
Environmental Protection Agency § 117.3 (4) Applicability date. This paragraph TABLE 117.3—REPORTABLE QUANTITIES OF (i) is applicable beginning on February HAZARDOUS SUBSTANCES DESIGNATED PUR- 6, 2020. SUANT TO SECTION 311 OF THE CLEAN (j) Process waste water means any WATER ACT—Continued water which, during manufacturing or Cat- RQ in pounds processing, comes into direct contact Material egory (kilograms) with or results from the production or use of any raw material, intermediate Ammonium benzoate ...................... D ...... 5,000 (2,270) Ammonium bicarbonate .................. D ...... 5,000 (2,270) product, finished product, byproduct, Ammonium bichromate ................... A ....... 10 (4.54) or waste product. Ammonium bifluoride ...................... B ....... 100 (45.4) Ammonium bisulfite ......................... D ...... 5,000 (2,270) [44 FR 50776, Aug. 29, 1979, as amended at 58 Ammonium carbamate .................... D ...... 5,000 (2,270) FR 45039, Aug. 25, 1993; 65 FR 30904, May 15, Ammonium carbonate ..................... D ...... 5,000 (2,270) 2000; 80 FR 37112, June 29, 2015; 83 FR 5208, Ammonium chloride ........................ D ...... 5,000 (2,270) Feb. 6, 2018] Ammonium chromate ...................... A ....... 10 (4.54) Ammonium citrate dibasic ............... D ...... 5,000 (2,270) Ammonium fluoborate ..................... D ...... 5,000 (2,270) § 117.2 Abbreviations. Ammonium fluoride ......................... B ....... 100 (45.4) NPDES equals National Pollutant Ammonium hydroxide ..................... C -
United States Patent Office
United States Patent Office 3,330,620 Patented July 11, 1967 2 3,330,620 aqueous solution is used and this base is selected from METHOD FOR OXEDZNG AMMONUMSULFTE TO AMMONUMSULFATE the group consisting of pyridine, picolines, lutidines, col Angel Vian-Ortino and Vicente Martin-Municio, Madrid, lidines, quinoline, pyridic coal-tar bases, pyridic bases Spain, assignors to Empresa Auxiliar de la Industria, derived from petro-chemical processes, bases containing S.A., Madrid, Spain 5 pyridinic condensed rings and derivatives thereof. No Drawing. Fied Apr. 22, 1963, Ser. No. 274,806 The method of the present invention of converting am Claims priority, application Spain, Apr. 23, 1962, monium sulfite into ammonium sulfate may also be car 276,718 ried out by forming a dispersion of an organic, nitro 15 Claims. (C. 23-119) gen-containing base in an aqueous solution of ammonium 10 sulfate and ammonium sulfite, the organic base being in The present invention relates to a process for the soluble in the aqueous solution and being present in an quantitative oxidation of ammonium sulfite and, more amount equal to between 10% and 80% of the volume particularly, for the oxidation of ammonium sulfite which of the dispersion, passing air through the dispersion while has been formed by absorption of sulfur dioxide in aque the same is maintained at an elevated temperature of be ous ammonia solutions. Thus, the present invention is also 5 tween 40 and 140 C. and at an absolute pressure of be concerned with the recovery of sulfur dioxide from waste tween 1 and 11 atmospheres so as to substantially com gases in the form of ammonium sulfate. -
Chemical Products
CUSTOM MANUFACTURING AND FINE CHEMICAL SOURCING 768 N. Bethlehem Pike ⚫ Lower Gwynedd, PA 19002 USA Tel: (215) 628-2946 ⚫ Fax: (215) 628-4262 ⚫ Web: www.richmanchemical.com Chemical Products This is a representative list of products which Richman Chemical Inc. supplied, sourced for our customers, or custom manufactured. This partial list shows only what we have done in the past, and it may not include what we are capable of doing for you. Therefore, if you are looking for a specific material not on our list, please call with your inquiry. Satisfying your unique or special needs is our full time business. -
123. Antimony
1998:11 The Nordic Expert Group for Criteria Documentation of Health Risks from Chemicals 123. Antimony John Erik Berg Knut Skyberg Nordic Council of Ministers arbete och hälsa vetenskaplig skriftserie ISBN 91–7045–471–x ISSN 0346–7821 http://www.niwl.se/ah/ah.htm National Institute for Working Life National Institute for Working Life The National Institute for Working Life is Sweden's center for research and development on labour market, working life and work environment. Diffusion of infor- mation, training and teaching, local development and international collaboration are other important issues for the Institute. The R&D competence will be found in the following areas: Labour market and labour legislation, work organization and production technology, psychosocial working conditions, occupational medicine, allergy, effects on the nervous system, ergonomics, work environment technology and musculoskeletal disorders, chemical hazards and toxicology. A total of about 470 people work at the Institute, around 370 with research and development. The Institute’s staff includes 32 professors and in total 122 persons with a postdoctoral degree. The National Institute for Working Life has a large international collaboration in R&D, including a number of projects within the EC Framework Programme for Research and Technology Development. ARBETE OCH HÄLSA Redaktör: Anders Kjellberg Redaktionskommitté: Anders Colmsjö och Ewa Wigaeus Hjelm © Arbetslivsinstitutet & författarna 1998 Arbetslivsinstitutet, 171 84 Solna, Sverige ISBN 91–7045–471–X ISSN 0346-7821 Tryckt hos CM Gruppen Preface The Nordic Council is an intergovernmental collaborative body for the five countries, Denmark, Finland, Iceland, Norway and Sweden. One of the committees, the Nordic Senior Executive Committee for Occupational Environmental Matters, initiated a project in order to produce criteria documents to be used by the regulatory authorities in the Nordic countries as a scientific basis for the setting of national occupational exposure limits. -
United States Patent Office Patented Sept
2,904,588 United States Patent Office Patented Sept. 15, 1959 - 2 m Three grams of the product prepared as described above was placed in a polyethylene bottle and 6 g. of water 2,904,588 was added. After the initial exothermic reaction had FLUOROPHOSPHORANES AND THEIR subsided and the solution had cooled, a white crystalline PREPARATION solid separated. This solid was recrystallized twice from water. After drying, the product melted at 159 to 161 William C. Smith, Wilmington, Del, assignor to E. I. du C. The melting point of benzenephosphonic acid is 159 Pont de Nemours and Company, Wilmington, Del., a to 161° C., and this is the product expected from the com corporation of Delaware plete hydrolysis of phenyltetrafluorophosphorane. No Drawing. Application March 26, 1956 O Nuclear magnetic resonance examination of the phenyl Serial No. 573,659 tetrafluorophosphorane showed it to have four equiv alent fluorine atoms bound to phosphorus, which indi 15 Claims. (C. 260-543) cated a square pyramidal structure. This invention relates to new compositions of matter 5 EXAMPLE II and to their preparation. Example I was repeated, using a charge consisting Organic fluorine compounds have attained considerable of 53.7 g (0.3 mole) of phenylphosphonous dichloride importance in recent years and simple and economic in the reaction flask and 65.1 g (0.3 mole) of antimony methods for their preparation are greatly desired. pentafluoride in the dropping funnel. The antimony This invention has as an object the preparation of new 20 pentafluoride was added to the phenylphosphonous di fluorophosphoranes. A further object is the provision of chloride at such a rate that the temperature of the reac a new process for their preparation. -
Effects of Post-Manufacture Board Treatments on Formaldegyde Emission
Effects of post-manufacture board treatments on formaldehyde emission: a literature review (1960-1984) George E. Myers treatments. At present I suggest that impregnation of Abstract boards with aqueous solutions (Method 1) is likely to be This paper reviews the literature dealing with the the most reliable because it should permit the use of a many post-manufacture board treatments used to re large scavenger excess and also allow neutralization of duce formaldehyde emission from urea-formaldehyde board acidity to reduce resin hydrolysis. bonded boards. Such treatments have almost solely used one or more of five chemical or physical principles: 1) formaldehyde reaction with NH3, 2) formaldehyde reaction with oxygenated sulfur compounds, 3) formal This is the fifth in a planned series of six critical dehyde reaction with organic -NH functionality, 4) pH reviews of the literature on different aspects of the adjustment, and 5) physical barrier. I have categorized problem of formaldehyde emission from adhesively the available reports according to four primary board bonded wood products. The series was initiated at the treatment methods that use the five principles in differ Forest Products Laboratory, Madison, Wis., in response ent ways. The four primary treatment methods are: to a need expressed by industry representatives for an 1. Application of scavengers as solids or aqueous independent evaluation and summation of data from solutions. Ammonium bicarbonate and carbonate have diverse sources. The six aspects being reviewed concern been used as solid powders, while the solutions involved the effects of formaldehyde-to-urea mole ratio (F/U) a variety of ammonium salts, ammonium and alkali (48), ventilation rate and loading (49), temperature and metal salts with sulfur-containing anions, and urea and humidity (51), separate additions to wood furnish or other compounds having -NH functionality; veneer (52), post-manufacture treatments of boards, 2. -
Toxic Or Hazardous Substance List
301 CMR: EXECUTIVE OFFICE OF ENERGY AND ENVIRONMENTAL AFFAIRS 301 CMR 41.00: TOXIC OR HAZARDOUS SUBSTANCE LIST Section 41.01: Authority and Purpose 41.02: Definitions 41.03: Toxic or Hazardous Substance List 41.04: Amendment of the Toxic or Hazardous Substance List 41.05: Designation of Higher and Lower Hazard Substances 41.06: Higher Hazard Substances 41.07: Lower Hazard Substances 41.01: Authority and Purpose (1) Authority. The Administrative Council On Toxics Use Reduction adopts 301 CMR 41.00 pursuant to M.G.L. c. 21I, §§ 4(C) and 9. (2) Purpose. The Administrative Council on Toxics Use Reduction promulgates 301 CMR 41.00 to carry out its authority and responsibility: (a) to promote the coordination and enforcement of federal and state laws and regulations pertaining to toxics production and use, hazardous waste, industrial hygiene, worker safety, public exposure to toxics and the release of toxics into the environment; (b) to coordinate state programs in order to promote, most effectively, toxics use reduction in the Commonwealth; (c) to minimize unnecessary duplication of reporting requirements concerning toxic or hazardous substance production, use, release, disposal, and worker exposure; (d) to provide up-to-date and consistent information about manufacturing, worker exposure, distribution, process, sale, storage, release or other use of toxics on a facility, regional and statewide basis; (e) to adjust the toxic or hazardous substance list under M.G.L. c. 21I, § 9 by adding or deleting substances consistent with the changes on the Toxic Chemical List established pursuant to Section 313 of the Emergency Planning and Community Right-to-Know Act (EPCRA); (f) to adjust the toxic or hazardous substance list under M.G.L. -
SAFETY DATA SHEET Issuing Date 10-May-2018 Revision Date 22-Aug-2019 Revision Number 3
SAFETY DATA SHEET Issuing Date 10-May-2018 Revision Date 22-Aug-2019 Revision Number 3 1. IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND OF THE COMPANY/UNDERTAKING Product Identifier Product Name AMMONIUM BENZOATE POWDER Other means of identification Product Code 1328400 CAS Number 1863-63-4 Formula H4NOOC Synonyms Benzoic acid, ammonium salt (1:1) Recommended use of the chemical and restrictions on use Recommended Use Misc. Intermediate Uses advised against Do not use where contact with food or drinking water is possible. Avoid prolonged contact with eyes, skin, and clothing. Details of the supplier of the safety data sheet Supplier Address ACETO US, LLC 4 Tri Harbor Court Port Washington, NY 11050-4661 Phone: (516) 627-6000 Fax: (516) 627-6093 Email: [email protected] Emergency Telephone Number(s) ChemTrec: 1-800-424-9300 Outside of the United States: 1-703-527-3887 2. HAZARDS IDENTIFICATION Classification Acute toxicity - Oral Category 4 Acute toxicity - Inhalation (Dusts/Mists) Category 4 Skin Corrosion/Irritation Category 2 Serious eye damage/eye irritation Category 2 Label elements Emergency Overview Signal Word Warning Hazard statements Harmful if swallowed Harmful if inhaled Causes skin irritation Causes serious eye irritation _____________________________________________________________________________________________ Page 1 / 9 1328400 AMMONIUM BENZOATE POWDER Revision Date 22-Aug-2019 _____________________________________________________________________________________________ Appearance Physical State Odor White Powder Solid No information available Precautionary Statements - Prevention Wash face, hands and any exposed skin thoroughly after handling Do not eat, drink or smoke when using this product Avoid breathing dust/fume/gas/mist/vapors/spray Use only outdoors or in a well-ventilated area Wear protective gloves/protective clothing/eye protection/face protection Precautionary Statements - Response Specific treatment (see supplemental first aid instructions on this label) IF IN EYES: Rinse cautiously with water for several minutes.