LAVA® DESIGN INFRARED HEATING A work of art that emits heat.
www.etherma.com w
THE FUTURE OF HEATING IS ALL ELECTRIC. w
OUR MODELS AT A GLANCE
LAVA® BASIC-DM LAVA®-LED LAVA® FRAME LAVA® DESK 120 For wall and ceiling mounting. Accessories LED lighting for For flush mounting in the Under the desk. Page 8 LAVA® BASIC-DM. ceiling and wall. Page 11 Page 9 Page 10
LAVA® STEEL 2.0 LAVA® GLAS 2.0 LAVA® CERAMIC 2.0 LAVA® DYL 2.0 The entry-level model. Noble glass look. Timeless appearance. Individual design. Page 12f. Page 12f. Page 12f. Page 14
LAVA®-CRYSTAL LAVA® BATH 2.0 LAVA® GLAS 2.0 - PLUS Accessories Swarovski crystals Infrared heating with For the extra power. as finishing. towel holder. Page 17 Page 15 Page 16
3 24-26 °C 19,5-20 °C
22 °C 22 °C 19-19,5 °C
30 °C
19 °C
18 °C
KONVEKTIONSWÄRMECONVECTION INFRAROTWÄRMEINFRARED HEAT
INFRARED LAVA® design infrared heating is based on moisture, resulting in a more comfortable the principle of solar radiation. The infrared environment with a constant humidity of WARMTH - heat emitted is absorbed by thermal mass 45% to 55% - an absolute benefit for com- (the ceiling, walls, floor, furniture and peo- fort. HOW IT WORKS ple) where it is stored and gradually relea- sed back into the room. This homogeneous Allergy sufferers also benefit from inf- heating of the room results in a pleasant rared heat. Standard heaters warm the air cosy environment where you feel relaxed. to create a feeling of warmth. The warmer air rises to the ceiling where it is cooled As you are warmed directly by the infrared, again and sinks back down to the ground, the room air temperature can be reduced wasting valuable energy and prolonging the by up to 2-3 °C with the same comfort - and warm-up time. These convection currents each degree Celsius less saves around 6-7% carry dust particles and allergens and dry of energy. As a positive side-effect, these out the air even further. This is not the case warm walls provide better insulation and with infrared heating as objects are heated prevent condensation and in the worst cases directly and convection currents are virtu- mould. Walls that absorb infrared radiation ally non-existent. are drier as they absorb less atmospheric
4 THE HEATING Lower heat requirements in well-insulated med regulation and optimised insulation of buildings, rapidly increasing gas and oil pri- outer walls and windows mean that this is (R)EVOLUTION ces and the ongoing development of pho- no longer the case. On the contrary, if you tovoltaic technology are making infrared take into account the ‘true life cost’ of a he- heating systems a practical alternative. ating system (capital investment, installa- The precisely-timed electronic regulation tion, operating and on-going maintenance for individual rooms offers a comfortable costs) over a 20-year period, LAVA® infrared and energy-efficient heating method. With heating turns out to be one of the most con- infrared heating systems, the heat is gene- venient and cost-effective heating systems. rated quickly at the touch of a button and is produced where it is needed, in the room Even the power suppliers have changed itself, with no energy loss. their thinking over the last few years and are now increasingly turning to renewable Electric heating systems are more cost- power. Numerous interesting offers from effective to buy and install and do not ge- energy suppliers are enabling customers nerate any maintenance costs. They enable to help shape the direction of future energy innovative and independent heating sys- policy. Those who opt for an electric hea- tems to be combined with one’s own po- ting system are no longer using up precious wer generation system, such as photovol- resources as it was often claimed. In fact, taic cells. This reduces dependence on oil electric infrared heating is now recommen- and gas and offers protection against their ded by some power suppliers as a cleaner, future price increases. more environmentally-friendly and cost- efficient source of heating. Historically electric heating has been consi- dered as expensive to run, However, recent technological developments, precisely-ti-
5 AREAS OF Infrared radiant heat is a fast, healthy and During the transition periods between the independent form of heating for the follow- warm and cold months of the year, ba- APPLICATION ing areas of application: throom heating may only be required for one ® to two hours in the morning and evening. FOR LAVA PRIMARY HEATING Switching on the entire heating system for Ideal as a comprehensive solution for well- this is both inefficient and expensive. LAVA® insulated buildings, low energy homes and design infrared heaters, by contrast, enable passive energy buildings. targeted and precisely-timed heating at only a fraction of the standard heating costs. EXTRA HEATING Can be used in addition to existing heating LOCALISED EXTRA HEATING systems. Suitable for renovations, exten- Ideal for when additional heat is required sions and loft conversions, particularly in during a certain time, for example at indi- bathrooms, relaxation areas, bedrooms, vidual work stations or massage and treat- living rooms and conservatories. ment tables.
6 THE BENEFITS OF THE LAVA® DESIGN INFRARED HEATING
HEALTHY EFFICIENT Comfortable warmth with low-temperature-radiant Heat is generated where it is needed, 100% loss-free. heat with no electromagnetic field. Pinpoint accuracy thanks to individual room controls.
ECONOMICAL SUSATINABLE No maintenance costs, operating cost savings thanks Clean power from renewables. Self-sufficiency if to increased heat sensitivity. combined with own power generation.
ELEGANT SIMPLE Exceptional design or simply in the background. Al- Uncomplicated, rapid assembly - horizontal, vertical lows individal layout. and overhead installation.
QUICK CHEAP Warmth at the push of a button, high radiation area, Lower purchase, installation and maintenance costs heat storage up to an hour. than alternative heating systems.
7 ® LAVA BASIC-DM TECHNICAL DATA
> Voltage: 230 V > Output: 350, 500, 750, 1000, 1500 W > Surface temperature: max. 120 °C > Surface: Structured surfaces Steel housing, white RAL 9016 > Device/Installation depth: 22/52 mm > IP Rating: IP 21 > Connection cable: 1 m, 3 x 1.5 mm², no plug > Warranty: 5 years > Certification: TÜV
The LAVA® BASIC-DM is suitable for heating from the ceiling as well BENEFITS OF THIS PRODUCT as from the wall, e.g. as an inconspicuous heater for living rooms, offices, bathrooms, schools, containers. The LAVA® BASIC-DM is a ++ Suitable for ceiling and wall mounting 22 mm flat infrared heater that impresses with its uniform infrared ++ 350, 750, 1500 W suitable for grid ceilings (625 x 625 mm) heat and aesthetics. ++ Ideal for the ceiling due to a lightweight construction ++ High radiant heating effect Mounted on the ceiling, in suspended ceilings or on the wall, the ++ Maximum radiation to the front due to the optimally insulated heaters are ideally suited for full area heating or zone heating. When rear installed in suspended ceilings, the heater is fully integrated into the ++ Maintenance free and magnetic field free ceiling. Ceiling mounting allows optimal use of the area and avoids any potential damage from bumping the panel. Available in white 62 cm 62 cm (RAL 9016) and 5 power outputs. 124,5 cm
62 cm 160 124,5 124,5
cm 62 cm cm 90 cm
cm 62cm
350 W 500 W 750 W 1000 W 1500 W
8 Efficient LED lighting as an accessory. ® TECHNICAL DATA LAVA -LED
> Colour temperature: 2700 K / 4000 K > Luminous flux: 3000 lm/lfm > Output: 24 W/m > Voltage: 24 V/DC > IP Rating: IP 20 > Beam angle: 120 ° > Service life: 60,000 h
BENEFITS OF THIS PRODUCT
++ Low consumption due to LED technology ++ 2 light colours (warm white/daylight) LAVA®-LED is an accessory for the LAVA® BASIC-DM infrared heater ++ Straightforward installation which can be used to light rooms, workplaces, but can also serve as ++ Maintenance-free an effect lighting. Consisting of two white aluminium profiles and ++ Long service life due to the high temperature resistance an opal Plexiglass cover for ideal light diffusion, the LAVA®-LED is ++ Optional dimming module & hand transmitter attached to the long sides of the infrared heater. The LAVA®-LED is controlled independently of the infrared heater. With the optional dimming module, the LED light bars can be dimmed either by means of a wired wall switch or with a hand transmitter.
9
® LAVA FRAME TECHNICAL DATA
> Voltage: 230 V > Output: 350, 500, 750, 1000 W > Surface temperature: max. 120 °C > Surface: Structured surfaces > Frame: Steel housing, white RAL 9016 > Device depth: 22 mm > Installation depth: 75 mm > IP Rating: IP 21 > Connection cable: 1 m, 3 x 1.5 mm², no plug > Warranty: 5 years
LAVA® FRAME is a built-in infrared heater that can be flush-mount- BENEFITS OF THIS PRODUCT ed in the ceiling or wall due to the installation frame, thus creating a harmonious room appearance. LAVA® FRAME is ideally suited for ++ Suitable for wall and ceiling installation installation in dry construction and concrete. This means that the ++ Mounting frame with Easy-Click LAVA® infrared heater blends into the architecture of the room and ++ Flush-mounted installation becomes virtually invisible. ++ Simple installation ++ Large infrared emitting surface Suitable as full area heating system or just as a zone heating solu- ++ High radiant heating effect tion to address cold-spots. This not only saves the heating costs, ++ Maintenance free and magnetic field free but also ensures a pleasant, healthy indoor climate. 62 cm
62 cm
62 cm 160 124,5
cm 62 cm cm 90
cm 62cm
350 W 500 W 750 W 1000 W Dimensions without frame
10 ® TECHNICAL DATA LAVA DESK 120
> Voltage: 230 V > Output: 120 W > Surface temperature: max. 70 °C > Surface: Smooth surface > Frame: Steel housing, white RAL 9016 > Device/Installation depth: 15 mm > IP Rating: IP 21 > Connection cable: 2 m incl. on/off switch, with plug > Certification: EC compliant
BENEFITS OF THIS PRODUCT LAVA® DESK provides perfect warmth at your desk - be it in the work- ++ Undertable & wall mounting place, in the kids bedroom, or for a warm spot for your four-legged ++ Infrared radiant heat friend. ++ Maintenance-free ++ Without magnetic field Simple installation with only 4 screws allows the provision of trou- ble-free infrared heating beneath the dining table or on walls, and gives targeted warmth. With a height of only 15 mm, the unit is all but invisible under the table, and takes up very little space.
70 cm 28 cm
120 W
11 LAVA® 2.0 DESIGN INFRARED HEATING Get Plug & Play ready with 2.0.
The LAVA® 2.0 design infrared heaters are particularly efficient and The frameless construction creates the modern design. Three sur- energy-saving. The 6 mm thick ESG toughened safety glass or the 6 faces (STEEL / GLASS / CERAMIC) and up to 6 power outputs are mm special ceramic as well as 2 temperature limiters in all panels available. guarantee safety in use at all times, the EMIMAX technology turns the surfaces into a very good radiation emitter. In conjunction with The practical Plug & Play box on the rear of all LAVA® 2.0 models the even heat distribution on the surface, the optimally insulated makes it easy to attach the desired controller. Controls include ma- rear guarantees a high radiation efficiency and thus the maximum nual (on the device), wireless and hard-wired options. infrared heat radiation into the room - the heat works exactly where it is needed.
BENEFITS OF THIS PRODUCT TECHNICAL DATA
++ Highest radiation efficiency due to > Voltage: 230 V • maximum forward radiation > Output: 250 – 1000 W • EMIMAX technology > Surface temperature: max. 95 °C • homogeneous surface temperature > Surface: Steel sheet or ESG safety glass 6 mm or 6 mm • large surface special ceramic • optimally insulated rear (max. 40 °C) > Device/Installation depth: 26/57 mm (Steel) or 30/61 mm (Glass & Ce- ++ Frameless Infinity design ramic) ++ Plug & Play connection system > IP Rating: IP X4 for easy individual control > IEC Protection Class: I ++ Highest safety against breakage and > Connection cable: 1m, with plug overheating > Installation: horizontally or vertically ++ No service or maintenance required > Warranty: 5 years ++ Without magnetic field > Certification: TÜV
12 LAVA® 2.0 in three different surfaces:
LAVA® STEEL 2.0 LAVA® GLAS 2.0 LAVA® CERAMIC 2.0
White Mirror White green Pure white Calacatta Black and red available on request.
Dimensions STEEL Dimensions GLAS Dimensions CERAMIC 63 cm 50 cm 63 cm 63 cm
63 cm 50 cm 63 cm 63 cm 160 160 63 cm 160 63 cm 63 cm 160 130 130 130 130
cm cm
50 cm cm 50 cm 50 cm cm
cm
cm cm cm 90 90 90
cm
63 cm cm 63 63
cm
cm cm
250 W 500 W 750 W 1000 W 250 W 500 W 600 W 750 W 800 W 1000 W 250 W 500 W 750 W 1000 W
13 DESIGN IT YOURSELF NOW.
® LAVA GLAS 2.0 TECHNICAL DATA ® DESIGN YOUR LAVA > Voltage: 230 V > Output: 180 – 700 W > Surface temperature: max. 70 °C > Surface: 6 mm ESG Safety glass > Device/Installation depth: 30/61 mm > IP Rating: IP X4 > IEC Protection Class: I > Connection cable: 1 m, with plug > Warranty: 5 years
BENEFITS OF THIS PRODUCT
++ Your LAVA® entirely the way you imagine it (e.g. logo, photo). ++ Plug & Play connection system for easy individual control LAVA® DYL offers the possibility to individually design your LAVA® ++ Service and maintenance free GLAS 2.0 infrared heating. We print your desired theme - whether ++ Without magnetic field a holiday photo or company logo, so that the infrared heating fits perfectly into your environment. The LAVA® DYL can be mounted ver- tically and horizontally on the wall. All LAVA® DYL are supplied with a power cord and an ON/OFF switch, are suitable for wall mounting and are Plug & Play ready. 63 cm
63 cm
63 cm 160 130
ETHERMA HINT: cm 50 cm
cm 90
cm Go to www.etherma.com for tips on how to design your image file 63
cm to ensure perfect printing results. Should you have any questions, please contact: [email protected]. 180 W 350 W 500 W 700 W
14 Precious SWAROVSKI crystals for your LAVA®. LAVA®-CRYSTAL
Exclusive and unique - an absolute design highlight. Refine your LAVA® GLAS 2.0 infrared heating with sparkling SWAROVSKI EL- EMENTS and make it a real eye-catcher. Three brilliant designs bring any room to shine and set accents to the interior design.
ETHERMA HINT: As design highlight on all LAVA® GLAS 2.0 additionally Crystal 01 Crystal 02 Crystal 03 available and to be ordered separately.
15 ® LAVA BATH 2.0 TECHNICAL DATA
> Voltage: 230 V > Output: 350 – 700 W > Surface temperature: max. 70 °C > Surface: Steel sheet or ESG safety glass 6 mm > Device/Installation depth: Steel sheet 26/57 mm or glass 30/61 mm > IP Rating: IP X4 > Connection cable: 1 m, with plug > Warranty: 5 years
BENEFITS OF THIS PRODUCT
++ High radiant heating effect ++ Frameless Infinity design ++ Plug & Play connection system for easy individual control ++ Various thermostat options as accessories The LAVA® BATH 2.0 is the perfect heat source for your bathroom. ++ One towel holder LAVA® Halti included and one more is The infrared radiant heat is generated by a special heating element available as accessory. with no magnetic field - once switched on, the surface is heated to ++ Easy installation - vertical wall mounting only a constant 70 °C giving snug warmth within the shortest time and ++ Maintenance free and magnetic field free with the towel rail, it also provides cosy warm towels. 50 cm 63 cm 50 cm 63 cm
63 cm 160 160 130 130
Various thermostats are optionally available. In addition, another cm cm
cm cm ® 90
LAVA Halti towel rail can be attached to the device. cm
350 W 400 W 500 W 600 W 700 W
16 ® TECHNICAL DATA LAVA GLAS 2.0 - PLUS
> Voltage: 230 V > Output: 1000 – 1500 W > Surface temperature: max. 95 °C > Surface: 6 mm safety glass, white > Device/Installation depth: 90 mm > IP Rating: IP 24 > IEC Protection Class: I > Connection cable: 1m, with plug > Installation: Horizontal > Warranty: 5 years
BENEFITS OF THIS PRODUCT The LAVA® GLAS 2.0 - PLUS is a designed radiant heating system with the plus on performance. This powerful heating device saves ++ Powerful space and yet still produces comfortable infrared radiant heat with ++ Saves space additional space heating. The heating unit can be mounted horizon- ++ Large infrared emitting surface tally on the wall and is suitable for large rooms as well as anywhere ++ Maintenance free and magnetic field free where extra heat is required. The LAVA® GLAS 2.0 - PLUS stands ++ Plug & Play connection system for easy individual control out due to its elegant design and fast heat delivery. Its Plug & Play ++ Only for horizontal installation on walls control system allow the simple, fast connection of an integrated ++ Straightforward installation control, a radio receiver or a wired room thermostat. The LAVA® GLAS 2.0 - PLUS stores heat for up to 1h.
105 cm 150 cm 63 63
cm cm
1000 W 1500 W
17 VERSION 1 RADIO CONTROL BASIC CONTROL
LAVA®-F: SIMPLER WITH RADIO LAVA®: PLUG & PLAY BASIC MODULE Radio-controlled thermostats avoid complex elevation and plaster All LAVA® infrared heaters are supplied without con- work for cable routing and allow easy installation of heaters. The trol system, but with a plug lead and ON/OFF switch. LAVA®-F radio receiver can be quickly fitted to all LAVA® 2.0 using They are, therefore, ideal for new construction and the connection system. The receiver is controlled by the ET-14A ra- anywhere where wired room thermostats are used. dio thermostat (sold separately) which can control up to 16 LAVA®-F The Plug & Play connection system (IP65) allows radio receivers. The ET-14A has a programmable week program, direct connection to a wired room thermostat, easy frost protection function, manual mode and ON/OFF function. integration with a radio receiver LAVA®-F or direct control of the device with the LAVA®-R thermostat or Timer LAVA®-T.
VERSION 2 WIRED
WIRED ROOM THERMOSTATS Ideal for new buildings and renovation, for example when old night storage heaters, which were controlled by thermostat, are replaced. eTOUCH eco eTWIST eTOUCH basic
LAVA® 2.0 PLUG & PLAY CONTROL SYSTEM The control you always wanted.
Modern, precise control is the key to saving the operating costs and avoiding the waste of the valuable energy. The various types of the LAVA® design infrared heaters in combination with an appropriate thermostat provides the ideal solution for every individual need.
Due to the new Plug & Play connection system, you can tailor your LAVA® design infrared heaters to your individual needs at any time. For instance, you can upgrade the standard model at a later stage with a thermostat or a radio receiver.
18 VERSION 3 ON THE DEVICE
LAVA®-R: THE INTEGRATED THERMOSTAT All LAVA® 2.0 infrared heaters can be fitted with a thermostat which has been developed specifically Plug & Play box for infrared heaters. The thermostat controls the room temperature and optimises the surface tem- perature of the LAVA®. Furthermore, the surface temperature in children‘s rooms and bathrooms, for example, can be limited to 60°C with a switch. The adjustable temperature range is from 5 to 35°C. The LAVA® -R thermostat can be easily fitted to all LAVA® 2.0 units using the connection system. In combinati- on with the eNEXHO home automation system (more information on page 90), you can also convenient- ly control your LAVA® design infrared heater using a smartphone, tablet or PC when you are out and about.
LAVA®-T THE CONVENIENT TIMER All LAVA® 2.0 infrared heaters can be fitted with a timer which is specially developed for the temporary operation. By pressing the timer the device heats for 2 hours with maximum power and then switches off automatically. The timer can be switched off early at any time by pressing the button again. The LAVA®-T can be easily fitted to all LAVA® 2.0 units using the connection system.
® On the device Wired Radio control
LAVA 2.0 PLUG & PLAY CONTROL SYSTEM ® ET-14A LAVA -F ET-111A Type P&P-Box LAVA®-R LAVA®-T eTOUCH eco eTWIST eTOUCH basic (thermostat) (receiver) (receiver) The control you always wanted. LAVA® BASIC-DM Z Z Z Z Z
LAVA® FRAME Z Z Z Z Z
LAVA® DESK 120
LAVA® STEEL 2.0 V Z Z Z Z Z Z Z
LAVA® GLAS 2.0 V Z Z Z Z Z Z Z
LAVA® CERAMIC 2.0 V Z Z Z Z Z Z Z
LAVA® DYL 2.0 V Z Z Z Z Z Z Z
LAVA® BATH 2.0 V Z Z Z Z Z Z Z
LAVA® GLAS 2.0-PLUS V Z Z Z Z Z Z Z
V: Pre-installed Z: Accessories
19 THE PERFECT COMPLEMENT.
The combination of underfloor and infrared heating ma- kes every house a cosy warm home. ETHERMA has the right heating mat for every type of flooring, whether tile, laminate or parquet. The netted heating mats can be custom-made to ensure an easy and fast installation in architecturally challenging spaces.
All statements without guarantee. Changes, errors and misprints reserved.
ETHERMA T +43 (0) 6214 / 76 77 ARC THERMAL Buckinghamshire, HP5 3QW Elektrowärme GmbH F +43 (0) 6214 / 76 66 PRODUCTS T +44 (0) 1923 889481 Landesstraße 16 [email protected] UK Distributor [email protected] A-5302 Henndorf www.etherma.com arcthermalproducts.co.uk